From 8a64c0f6b7ec7f758c4ef445e49f479e27fa2236 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Tue, 6 Apr 2010 10:52:44 +0200 Subject: libertas/sdio: 8686: set ECSI bit for 1-bit transfers When operating in 1-bit mode, SDAT1 is used as dedicated interrupt line. However, the 8686 will only drive this line when the ECSI bit is set in the CCCR_IF register. Thanks to Alagu Sankar for pointing me in the right direction. Signed-off-by: Daniel Mack Cc: Alagu Sankar Cc: Volker Ernst Cc: Dan Williams Cc: John W. Linville Cc: Holger Schurig Cc: Bing Zhao Cc: libertas-dev@lists.infradead.org Cc: linux-wireless@vger.kernel.org Cc: linux-mmc@vger.kernel.org Acked-by: Dan Williams Signed-off-by: John W. Linville --- include/linux/mmc/sdio.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mmc/sdio.h b/include/linux/mmc/sdio.h index 47ba464..118f029 100644 --- a/include/linux/mmc/sdio.h +++ b/include/linux/mmc/sdio.h @@ -94,6 +94,8 @@ #define SDIO_BUS_WIDTH_1BIT 0x00 #define SDIO_BUS_WIDTH_4BIT 0x02 +#define SDIO_BUS_ECSI 0x20 /* Enable continuous SPI interrupt */ +#define SDIO_BUS_SCSI 0x40 /* Support continuous SPI interrupt */ #define SDIO_BUS_CD_DISABLE 0x80 /* disable pull-up on DAT3 (pin 1) */ -- cgit v1.1