From 9705ecc5c1f8f34f756164a711b4cc61110c0283 Mon Sep 17 00:00:00 2001 From: Balaji Rao Date: Tue, 27 Jan 2009 19:23:12 +0530 Subject: pcf50633_charger: Enable periodic charging restart The battery charger state machine switches into charging mode when the battery voltage falls below 96% of a battery float voltage. But the voltage drop in Li-ion batteries is marginal(1~2 %) till about 80% of its capacity - which means, after a BATFULL, charging won't be restarted until 80%. This work_struct function restarts charging at regular intervals to make sure the battery doesn't discharge too much. Signed-off-by: Balaji Rao Cc: Andy Green Signed-off-by: Anton Vorontsov --- include/linux/mfd/pcf50633/core.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/mfd/pcf50633/core.h b/include/linux/mfd/pcf50633/core.h index 4455b21..c8f51c3 100644 --- a/include/linux/mfd/pcf50633/core.h +++ b/include/linux/mfd/pcf50633/core.h @@ -29,6 +29,8 @@ struct pcf50633_platform_data { char **batteries; int num_batteries; + int charging_restart_interval; + /* Callbacks */ void (*probe_done)(struct pcf50633 *); void (*mbc_event_callback)(struct pcf50633 *, int); -- cgit v1.1 From cc52a29e6245acd9032fcfa0ffcab4cc612de986 Mon Sep 17 00:00:00 2001 From: Balaji Rao Date: Tue, 27 Jan 2009 19:22:55 +0530 Subject: pcf50633_charger: Remove unused mbc_set_status function The 'pcf50633_mbc_set_status' function is unused, so remove it. Signed-off-by: Balaji Rao Cc: Andy Green Signed-off-by: Anton Vorontsov --- include/linux/mfd/pcf50633/mbc.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/mfd/pcf50633/mbc.h b/include/linux/mfd/pcf50633/mbc.h index 6e17619..4119579 100644 --- a/include/linux/mfd/pcf50633/mbc.h +++ b/include/linux/mfd/pcf50633/mbc.h @@ -128,7 +128,6 @@ enum pcf50633_reg_mbcs3 { int pcf50633_mbc_usb_curlim_set(struct pcf50633 *pcf, int ma); int pcf50633_mbc_get_status(struct pcf50633 *); -void pcf50633_mbc_set_status(struct pcf50633 *, int what, int status); #endif -- cgit v1.1 From 5bf2b994bfe11bfe86231050897b2d881ca544d9 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Sun, 18 Jan 2009 17:40:27 +0100 Subject: pda_power: Add optional OTG transceiver and voltage regulator support This patch allows machines to use an OTG transceiver driver instead of supplying a custom is_usb_online callback to check USB power. Also, in the case that the OTG transceiver handles charger control when connected to USB, a regulator named "ac_draw" can be supplied instead of the custom set_charge callback to control the charger when connected to AC. The check for (transceiver->state == OTG_STATE_B_PERIPHERAL) in otg_is_usb_online is probably too simple, I'm just using this with a peripheral only device and gpio_vbus + bq24022. I'm not sure which other OTG states can supply power. Signed-off-by: Philipp Zabel Signed-off-by: Anton Vorontsov --- include/linux/pda_power.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pda_power.h b/include/linux/pda_power.h index cb7d10f..d4cf7a2 100644 --- a/include/linux/pda_power.h +++ b/include/linux/pda_power.h @@ -31,6 +31,8 @@ struct pda_power_pdata { unsigned int wait_for_status; /* msecs, default is 500 */ unsigned int wait_for_charger; /* msecs, default is 500 */ unsigned int polling_interval; /* msecs, default is 2000 */ + + unsigned long ac_max_uA; /* current to draw when on AC */ }; #endif /* __PDA_POWER_H__ */ -- cgit v1.1 From 73969ff0eda233f140bcbed1251431387b43f383 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Wed, 4 Mar 2009 23:27:14 -0800 Subject: Input: generic driver for rotary encoders on GPIOs This patch adds a generic driver for rotary encoders connected to GPIO pins of a system. It relies on gpiolib and generic hardware irqs. The documentation that also comes with this patch explains the concept and how to use the driver. Signed-off-by: Daniel Mack Tested-by: H Hartley Sweeten Signed-off-by: Dmitry Torokhov --- include/linux/rotary_encoder.h | 13 +++++++++++++ 1 file changed, 13 insertions(+) create mode 100644 include/linux/rotary_encoder.h (limited to 'include/linux') diff --git a/include/linux/rotary_encoder.h b/include/linux/rotary_encoder.h new file mode 100644 index 0000000..12d63a3 --- /dev/null +++ b/include/linux/rotary_encoder.h @@ -0,0 +1,13 @@ +#ifndef __ROTARY_ENCODER_H__ +#define __ROTARY_ENCODER_H__ + +struct rotary_encoder_platform_data { + unsigned int steps; + unsigned int axis; + unsigned int gpio_a; + unsigned int gpio_b; + unsigned int inverted_a; + unsigned int inverted_b; +}; + +#endif /* __ROTARY_ENCODER_H__ */ -- cgit v1.1 From b4be468cc1e65110d9144751bf7079dad6f142b7 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Mon, 9 Mar 2009 20:12:52 -0700 Subject: Input: add AD7879 Touchscreen driver [randy.dunlap@oracle.com: don't use bus_id] [dtor@mail.ru: locking and other fixups] Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu Signed-off-by: Randy Dunlap Signed-off-by: Andrew Morton Signed-off-by: Dmitry Torokhov --- include/linux/spi/ad7879.h | 35 +++++++++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) create mode 100644 include/linux/spi/ad7879.h (limited to 'include/linux') diff --git a/include/linux/spi/ad7879.h b/include/linux/spi/ad7879.h new file mode 100644 index 0000000..4231104 --- /dev/null +++ b/include/linux/spi/ad7879.h @@ -0,0 +1,35 @@ +/* linux/spi/ad7879.h */ + +/* Touchscreen characteristics vary between boards and models. The + * platform_data for the device's "struct device" holds this information. + * + * It's OK if the min/max values are zero. + */ +struct ad7879_platform_data { + u16 model; /* 7879 */ + u16 x_plate_ohms; + u16 x_min, x_max; + u16 y_min, y_max; + u16 pressure_min, pressure_max; + + /* [0..255] 0=OFF Starts at 1=550us and goes + * all the way to 9.440ms in steps of 35us. + */ + u8 pen_down_acc_interval; + /* [0..15] Starts at 0=128us and goes all the + * way to 4.096ms in steps of 128us. + */ + u8 first_conversion_delay; + /* [0..3] 0 = 2us, 1 = 4us, 2 = 8us, 3 = 16us */ + u8 acquisition_time; + /* [0..3] Average X middle samples 0 = 2, 1 = 4, 2 = 8, 3 = 16 */ + u8 averaging; + /* [0..3] Perform X measurements 0 = OFF, + * 1 = 4, 2 = 8, 3 = 16 (median > averaging) + */ + u8 median; + /* 1 = AUX/VBAT/GPIO set to GPIO Output */ + u8 gpio_output; + /* Initial GPIO pin state (valid if gpio_output = 1) */ + u8 gpio_default; +}; -- cgit v1.1 From 9756b15e1b58453a6fd54b85c1ad8515209e10bb Mon Sep 17 00:00:00 2001 From: Yinghai Lu Date: Mon, 30 Mar 2009 20:37:20 -0700 Subject: irq: fix cpumask memory leak on offstack cpumask kernels Need to free the old cpumask for affinity and pending_mask. Signed-off-by: Yinghai Lu Acked-by: Rusty Russell LKML-Reference: <49D18FF0.50707@kernel.org> Signed-off-by: Ingo Molnar --- include/linux/irq.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'include/linux') diff --git a/include/linux/irq.h b/include/linux/irq.h index 974890b..99d147e 100644 --- a/include/linux/irq.h +++ b/include/linux/irq.h @@ -482,6 +482,16 @@ static inline void init_copy_desc_masks(struct irq_desc *old_desc, #endif } +static inline void free_desc_masks(struct irq_desc *old_desc, + struct irq_desc *new_desc) +{ + free_cpumask_var(old_desc->affinity); + +#ifdef CONFIG_GENERIC_PENDING_IRQ + free_cpumask_var(old_desc->pending_mask); +#endif +} + #else /* !CONFIG_SMP */ static inline bool init_alloc_desc_masks(struct irq_desc *desc, int cpu, @@ -495,6 +505,10 @@ static inline void init_copy_desc_masks(struct irq_desc *old_desc, { } +static inline void free_desc_masks(struct irq_desc *old_desc, + struct irq_desc *new_desc) +{ +} #endif /* CONFIG_SMP */ #endif /* _LINUX_IRQ_H */ -- cgit v1.1 From 8d82ffd15e59febf2c597067a777526958b7f769 Mon Sep 17 00:00:00 2001 From: Wolfgang Grandegger Date: Tue, 7 Apr 2009 10:20:56 +0200 Subject: powerpc: Document new FSL I2C bindings and cleanup This patch documents the new bindings for the MPC I2C bus driver. Furthermore, it removes obsolete FSL device related definitions for I2C. Signed-off-by: Wolfgang Grandegger Signed-off-by: Kumar Gala --- include/linux/fsl_devices.h | 4 ---- 1 file changed, 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h index f2a78b5..43fc95d 100644 --- a/include/linux/fsl_devices.h +++ b/include/linux/fsl_devices.h @@ -43,10 +43,6 @@ * */ -/* Flags related to I2C device features */ -#define FSL_I2C_DEV_SEPARATE_DFSRR 0x00000001 -#define FSL_I2C_DEV_CLOCK_5200 0x00000002 - enum fsl_usb2_operating_modes { FSL_USB2_MPH_HOST, FSL_USB2_DR_HOST, -- cgit v1.1 From f876d346e3807647b1de411de6a86c44821896ca Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Wed, 8 Apr 2009 14:05:43 +0900 Subject: tracing: append a comma to INIT_FTRACE_GRAPH Impact: dont break future extensions of INIT_TASK While not a problem right now, due to lack of a comma, build fails if elements are appended to INIT_TASK() macro in development code: arch/x86/kernel/init_task.c:33: error: request for member `XXXXXXXXXX' in something not a structure or union arch/x86/kernel/init_task.c:33: error: initializer element is not constant arch/x86/kernel/init_task.c:33: error: (near initialization for `init_task.ret_stack') make[1]: *** [arch/x86/kernel/init_task.o] Error 1 make: *** [arch/x86/kernel] Error 2 Signed-off-by: Tetsuo Handa Cc: srostedt@redhat.com LKML-Reference: <200904080505.n3855hcn017109@www262.sakura.ne.jp> Signed-off-by: Ingo Molnar --- include/linux/ftrace.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index da5405d..ff112a8 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -357,7 +357,7 @@ struct ftrace_graph_ret { #ifdef CONFIG_FUNCTION_GRAPH_TRACER /* for init task */ -#define INIT_FTRACE_GRAPH .ret_stack = NULL +#define INIT_FTRACE_GRAPH .ret_stack = NULL, /* * Stack of return addresses for functions -- cgit v1.1 From 60f85019c6c8c1aebf3485a313e0da094bc95d07 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 8 Apr 2009 14:13:01 +0200 Subject: ide: replace IDE_TFLAG_* flags by IDE_VALID_* Replace IDE_TFLAG_{IN|OUT}_* flags meaning to the taskfile register validity on input/output by the IDE_VALID_* flags and introduce 4 symmetric 8-bit register validity indicator subfields, 'valid.{input/output}.{tf|hob}', into the 'struct ide_cmd' instead of using the 'tf_flags' field for that purpose (this field can then be turned from 32-bit into 8-bit one). Signed-off-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- include/linux/ide.h | 95 +++++++++++++++++++++-------------------------------- 1 file changed, 38 insertions(+), 57 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ide.h b/include/linux/ide.h index a5d26f6..58951f5 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -240,65 +240,38 @@ typedef enum { } ide_startstop_t; enum { + IDE_VALID_ERROR = (1 << 1), + IDE_VALID_FEATURE = IDE_VALID_ERROR, + IDE_VALID_NSECT = (1 << 2), + IDE_VALID_LBAL = (1 << 3), + IDE_VALID_LBAM = (1 << 4), + IDE_VALID_LBAH = (1 << 5), + IDE_VALID_DEVICE = (1 << 6), + IDE_VALID_LBA = IDE_VALID_LBAL | + IDE_VALID_LBAM | + IDE_VALID_LBAH, + IDE_VALID_OUT_TF = IDE_VALID_FEATURE | + IDE_VALID_NSECT | + IDE_VALID_LBA, + IDE_VALID_IN_TF = IDE_VALID_NSECT | + IDE_VALID_LBA, + IDE_VALID_OUT_HOB = IDE_VALID_OUT_TF, + IDE_VALID_IN_HOB = IDE_VALID_ERROR | + IDE_VALID_NSECT | + IDE_VALID_LBA, +}; + +enum { IDE_TFLAG_LBA48 = (1 << 0), - IDE_TFLAG_OUT_HOB_FEATURE = (1 << 1), - IDE_TFLAG_OUT_HOB_NSECT = (1 << 2), - IDE_TFLAG_OUT_HOB_LBAL = (1 << 3), - IDE_TFLAG_OUT_HOB_LBAM = (1 << 4), - IDE_TFLAG_OUT_HOB_LBAH = (1 << 5), - IDE_TFLAG_OUT_HOB = IDE_TFLAG_OUT_HOB_FEATURE | - IDE_TFLAG_OUT_HOB_NSECT | - IDE_TFLAG_OUT_HOB_LBAL | - IDE_TFLAG_OUT_HOB_LBAM | - IDE_TFLAG_OUT_HOB_LBAH, - IDE_TFLAG_OUT_FEATURE = (1 << 6), - IDE_TFLAG_OUT_NSECT = (1 << 7), - IDE_TFLAG_OUT_LBAL = (1 << 8), - IDE_TFLAG_OUT_LBAM = (1 << 9), - IDE_TFLAG_OUT_LBAH = (1 << 10), - IDE_TFLAG_OUT_TF = IDE_TFLAG_OUT_FEATURE | - IDE_TFLAG_OUT_NSECT | - IDE_TFLAG_OUT_LBAL | - IDE_TFLAG_OUT_LBAM | - IDE_TFLAG_OUT_LBAH, - IDE_TFLAG_OUT_DEVICE = (1 << 11), - IDE_TFLAG_WRITE = (1 << 12), - IDE_TFLAG_CUSTOM_HANDLER = (1 << 13), - IDE_TFLAG_DMA_PIO_FALLBACK = (1 << 14), - IDE_TFLAG_IN_HOB_ERROR = (1 << 15), - IDE_TFLAG_IN_HOB_NSECT = (1 << 16), - IDE_TFLAG_IN_HOB_LBAL = (1 << 17), - IDE_TFLAG_IN_HOB_LBAM = (1 << 18), - IDE_TFLAG_IN_HOB_LBAH = (1 << 19), - IDE_TFLAG_IN_HOB_LBA = IDE_TFLAG_IN_HOB_LBAL | - IDE_TFLAG_IN_HOB_LBAM | - IDE_TFLAG_IN_HOB_LBAH, - IDE_TFLAG_IN_HOB = IDE_TFLAG_IN_HOB_ERROR | - IDE_TFLAG_IN_HOB_NSECT | - IDE_TFLAG_IN_HOB_LBA, - IDE_TFLAG_IN_ERROR = (1 << 20), - IDE_TFLAG_IN_NSECT = (1 << 21), - IDE_TFLAG_IN_LBAL = (1 << 22), - IDE_TFLAG_IN_LBAM = (1 << 23), - IDE_TFLAG_IN_LBAH = (1 << 24), - IDE_TFLAG_IN_LBA = IDE_TFLAG_IN_LBAL | - IDE_TFLAG_IN_LBAM | - IDE_TFLAG_IN_LBAH, - IDE_TFLAG_IN_TF = IDE_TFLAG_IN_NSECT | - IDE_TFLAG_IN_LBA, - IDE_TFLAG_IN_DEVICE = (1 << 25), - IDE_TFLAG_HOB = IDE_TFLAG_OUT_HOB | - IDE_TFLAG_IN_HOB, - IDE_TFLAG_TF = IDE_TFLAG_OUT_TF | - IDE_TFLAG_IN_TF, - IDE_TFLAG_DEVICE = IDE_TFLAG_OUT_DEVICE | - IDE_TFLAG_IN_DEVICE, + IDE_TFLAG_WRITE = (1 << 1), + IDE_TFLAG_CUSTOM_HANDLER = (1 << 2), + IDE_TFLAG_DMA_PIO_FALLBACK = (1 << 3), /* force 16-bit I/O operations */ - IDE_TFLAG_IO_16BIT = (1 << 26), + IDE_TFLAG_IO_16BIT = (1 << 4), /* struct ide_cmd was allocated using kmalloc() */ - IDE_TFLAG_DYN = (1 << 27), - IDE_TFLAG_FS = (1 << 28), - IDE_TFLAG_MULTI_PIO = (1 << 29), + IDE_TFLAG_DYN = (1 << 5), + IDE_TFLAG_FS = (1 << 6), + IDE_TFLAG_MULTI_PIO = (1 << 7), }; enum { @@ -346,8 +319,16 @@ struct ide_cmd { struct ide_taskfile tf; u8 tf_array[14]; }; + + struct { + struct { + u8 tf; + u8 hob; + } out, in; + } valid; + + u8 tf_flags; u8 ftf_flags; /* for TASKFILE ioctl */ - u32 tf_flags; int protocol; int sg_nents; /* number of sg entries */ -- cgit v1.1 From 745483f10c6cefb303007c6873e2bfce54efa8ed Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 8 Apr 2009 14:13:02 +0200 Subject: ide: simplify 'struct ide_taskfile' Make 'struct ide_taskfile' cover only 8 register values and thus put two such fields ('tf' and 'hob') into 'struct ide_cmd', dropping unnecessary 'tf_array' field from it. This required changing the prototype of ide_get_lba_addr() and ide_tf_dump(). Signed-off-by: Sergei Shtylyov [bart: fix setting of ATA_LBA bit for LBA48 commands in __ide_do_rw_disk()] Signed-off-by: Bartlomiej Zolnierkiewicz --- include/linux/ide.h | 49 +++++++++++++++---------------------------------- 1 file changed, 15 insertions(+), 34 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ide.h b/include/linux/ide.h index 58951f5..e2ea38d 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -282,44 +282,25 @@ enum { }; struct ide_taskfile { - u8 hob_data; /* 0: high data byte (for TASKFILE IOCTL) */ - /* 1-5: additional data to support LBA48 */ - union { - u8 hob_error; /* read: error */ - u8 hob_feature; /* write: feature */ - }; - - u8 hob_nsect; - u8 hob_lbal; - u8 hob_lbam; - u8 hob_lbah; - - u8 data; /* 6: low data byte (for TASKFILE IOCTL) */ - - union { /*  7: */ - u8 error; /* read: error */ - u8 feature; /* write: feature */ + u8 data; /* 0: data byte (for TASKFILE ioctl) */ + union { /* 1: */ + u8 error; /* read: error */ + u8 feature; /* write: feature */ }; - - u8 nsect; /* 8: number of sectors */ - u8 lbal; /* 9: LBA low */ - u8 lbam; /* 10: LBA mid */ - u8 lbah; /* 11: LBA high */ - - u8 device; /* 12: device select */ - - union { /* 13: */ - u8 status; /*  read: status  */ + u8 nsect; /* 2: number of sectors */ + u8 lbal; /* 3: LBA low */ + u8 lbam; /* 4: LBA mid */ + u8 lbah; /* 5: LBA high */ + u8 device; /* 6: device select */ + union { /* 7: */ + u8 status; /* read: status */ u8 command; /* write: command */ }; }; struct ide_cmd { - union { - struct ide_taskfile tf; - u8 tf_array[14]; - }; - + struct ide_taskfile tf; + struct ide_taskfile hob; struct { struct { u8 tf; @@ -1143,7 +1124,7 @@ extern int ide_devset_execute(ide_drive_t *drive, void ide_complete_cmd(ide_drive_t *, struct ide_cmd *, u8, u8); int ide_complete_rq(ide_drive_t *, int, unsigned int); -void ide_tf_dump(const char *, struct ide_taskfile *); +void ide_tf_dump(const char *, struct ide_cmd *); void ide_exec_command(ide_hwif_t *, u8); u8 ide_read_status(ide_hwif_t *); @@ -1510,7 +1491,7 @@ static inline void ide_set_hwifdata (ide_hwif_t * hwif, void *data) extern void ide_toggle_bounce(ide_drive_t *drive, int on); -u64 ide_get_lba_addr(struct ide_taskfile *, int); +u64 ide_get_lba_addr(struct ide_cmd *, int); u8 ide_dump_status(ide_drive_t *, const char *, u8); struct ide_timing { -- cgit v1.1 From c9ff9e7b64138d87023b733e618f29a1d58543f7 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 8 Apr 2009 14:13:03 +0200 Subject: ide: refactor tf_load() method Simplify tf_load() method, making it deal only with 'struct ide_taskfile' and the validity flags that the upper layer passes, and moving the code that deals with the high order bytes into the only function interested, do_rw_taskfile(). This should stop the needless code duplication in this method and so make it about twice smaller than it was; along with simplifying the setup for the method call, this should save both time and space... Signed-off-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- include/linux/ide.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ide.h b/include/linux/ide.h index e2ea38d..0ba1c6a 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -624,7 +624,7 @@ struct ide_tp_ops { void (*write_devctl)(struct hwif_s *, u8); void (*dev_select)(ide_drive_t *); - void (*tf_load)(ide_drive_t *, struct ide_cmd *); + void (*tf_load)(ide_drive_t *, struct ide_taskfile *, u8); void (*tf_read)(ide_drive_t *, struct ide_cmd *); void (*input_data)(ide_drive_t *, struct ide_cmd *, @@ -1132,7 +1132,7 @@ u8 ide_read_altstatus(ide_hwif_t *); void ide_write_devctl(ide_hwif_t *, u8); void ide_dev_select(ide_drive_t *); -void ide_tf_load(ide_drive_t *, struct ide_cmd *); +void ide_tf_load(ide_drive_t *, struct ide_taskfile *, u8); void ide_tf_read(ide_drive_t *, struct ide_cmd *); void ide_input_data(ide_drive_t *, struct ide_cmd *, void *, unsigned int); -- cgit v1.1 From 3153c26b54230d025c6d536e8d3015def4524906 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Wed, 8 Apr 2009 14:13:03 +0200 Subject: ide: refactor tf_read() method Simplify tf_read() method, making it deal only with 'struct ide_taskfile' and the validity flags that the upper layer passes, and factoring out the code that deals with the high order bytes into ide_tf_readback() to be called from the only two functions interested, ide_complete_cmd() and ide_dump_sector(). This should stop the needless code duplication in this method and so make it about twice smaller than it was; along with simplifying the setup for the method call, this should save both time and space... Signed-off-by: Sergei Shtylyov Signed-off-by: Bartlomiej Zolnierkiewicz --- include/linux/ide.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ide.h b/include/linux/ide.h index 0ba1c6a..ff65fff 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -625,7 +625,7 @@ struct ide_tp_ops { void (*dev_select)(ide_drive_t *); void (*tf_load)(ide_drive_t *, struct ide_taskfile *, u8); - void (*tf_read)(ide_drive_t *, struct ide_cmd *); + void (*tf_read)(ide_drive_t *, struct ide_taskfile *, u8); void (*input_data)(ide_drive_t *, struct ide_cmd *, void *, unsigned int); @@ -1124,6 +1124,7 @@ extern int ide_devset_execute(ide_drive_t *drive, void ide_complete_cmd(ide_drive_t *, struct ide_cmd *, u8, u8); int ide_complete_rq(ide_drive_t *, int, unsigned int); +void ide_tf_readback(ide_drive_t *drive, struct ide_cmd *cmd); void ide_tf_dump(const char *, struct ide_cmd *); void ide_exec_command(ide_hwif_t *, u8); @@ -1133,7 +1134,7 @@ void ide_write_devctl(ide_hwif_t *, u8); void ide_dev_select(ide_drive_t *); void ide_tf_load(ide_drive_t *, struct ide_taskfile *, u8); -void ide_tf_read(ide_drive_t *, struct ide_cmd *); +void ide_tf_read(ide_drive_t *, struct ide_taskfile *, u8); void ide_input_data(ide_drive_t *, struct ide_cmd *, void *, unsigned int); void ide_output_data(ide_drive_t *, struct ide_cmd *, void *, unsigned int); -- cgit v1.1 From 7831d56b0a3544cbb6f82f76c34ca95e24d5b676 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Wed, 8 Apr 2009 20:13:16 +0100 Subject: tty: MAX3100 Thou shalt remember to use 'git add' or errors shall be visited on your downloads and there shall be wrath from on list and much gnashing of teeth. Thou shalt remember to use git status or there shall be catcalls and much embarrasment shall come to pass. Signed-off-by: Alan "I'm hiding" Cox Signed-off-by: Linus Torvalds --- include/linux/serial_max3100.h | 52 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) create mode 100644 include/linux/serial_max3100.h (limited to 'include/linux') diff --git a/include/linux/serial_max3100.h b/include/linux/serial_max3100.h new file mode 100644 index 0000000..4976bef --- /dev/null +++ b/include/linux/serial_max3100.h @@ -0,0 +1,52 @@ +/* + * + * Copyright (C) 2007 Christian Pellegrin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + + +#ifndef _LINUX_SERIAL_MAX3100_H +#define _LINUX_SERIAL_MAX3100_H 1 + + +/** + * struct plat_max3100 - MAX3100 SPI UART platform data + * @loopback: force MAX3100 in loopback + * @crystal: 1 for 3.6864 Mhz, 0 for 1.8432 + * @max3100_hw_suspend: MAX3100 has a shutdown pin. This is a hook + * called on suspend and resume to activate it. + * @poll_time: poll time for CTS signal in ms, 0 disables (so no hw + * flow ctrl is possible but you have less CPU usage) + * + * You should use this structure in your machine description to specify + * how the MAX3100 is connected. Example: + * + * static struct plat_max3100 max3100_plat_data = { + * .loopback = 0, + * .crystal = 0, + * .poll_time = 100, + * }; + * + * static struct spi_board_info spi_board_info[] = { + * { + * .modalias = "max3100", + * .platform_data = &max3100_plat_data, + * .irq = IRQ_EINT12, + * .max_speed_hz = 5*1000*1000, + * .chip_select = 0, + * }, + * }; + * + **/ +struct plat_max3100 { + int loopback; + int crystal; + void (*max3100_hw_suspend) (int suspend); + int poll_time; +}; + +#endif -- cgit v1.1 From 692d0eb9e02cf81fb387ff891f53840db2f3110a Mon Sep 17 00:00:00 2001 From: Mikulas Patocka Date: Thu, 9 Apr 2009 00:27:13 +0100 Subject: dm: remove limited barrier support Prepare for full barrier implementation: first remove the restricted support. Signed-off-by: Mikulas Patocka Signed-off-by: Alasdair G Kergon --- include/linux/device-mapper.h | 1 - 1 file changed, 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h index 66ec05a..ded2d7c 100644 --- a/include/linux/device-mapper.h +++ b/include/linux/device-mapper.h @@ -116,7 +116,6 @@ void dm_put_device(struct dm_target *ti, struct dm_dev *d); /* * Target features */ -#define DM_TARGET_SUPPORTS_BARRIERS 0x00000001 struct target_type { uint64_t features; -- cgit v1.1 From 47788c58e66c050982241d9a05eb690daceb05a9 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Wed, 8 Apr 2009 20:40:59 +0200 Subject: tracing/syscalls: use a dedicated file header Impact: fix build warnings and possibe compat misbehavior on IA64 Building a kernel on ia64 might trigger these ugly build warnings: CC arch/ia64/ia32/sys_ia32.o In file included from arch/ia64/ia32/sys_ia32.c:55: arch/ia64/ia32/ia32priv.h:290:1: warning: "elf_check_arch" redefined In file included from include/linux/elf.h:7, from include/linux/module.h:14, from include/linux/ftrace.h:8, from include/linux/syscalls.h:68, from arch/ia64/ia32/sys_ia32.c:18: arch/ia64/include/asm/elf.h:19:1: warning: this is the location of the previous definition [...] sys_ia32.c includes linux/syscalls.h which in turn includes linux/ftrace.h to import the syscalls tracing prototypes. But including ftrace.h can pull too much things for a low level file, especially on ia64 where the ia32 private headers conflict with higher level headers. Now we isolate the syscall tracing headers in their own lightweight file. Reported-by: Tony Luck Tested-by: Tony Luck Signed-off-by: Frederic Weisbecker Acked-by: Tony Luck Signed-off-by: Steven Rostedt Cc: Peter Zijlstra Cc: Jason Baron Cc: "Frank Ch. Eigler" Cc: Mathieu Desnoyers Cc: KOSAKI Motohiro Cc: Lai Jiangshan Cc: Jiaying Zhang Cc: Michael Rubin Cc: Martin Bligh Cc: Michael Davidson LKML-Reference: <20090408184058.GB6017@nowhere> Signed-off-by: Ingo Molnar --- include/linux/ftrace.h | 29 ----------------------------- include/linux/syscalls.h | 2 +- 2 files changed, 1 insertion(+), 30 deletions(-) (limited to 'include/linux') diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index ff112a8..8a0c2f2 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -511,33 +511,4 @@ static inline void trace_hw_branch_oops(void) {} #endif /* CONFIG_HW_BRANCH_TRACER */ -/* - * A syscall entry in the ftrace syscalls array. - * - * @name: name of the syscall - * @nb_args: number of parameters it takes - * @types: list of types as strings - * @args: list of args as strings (args[i] matches types[i]) - */ -struct syscall_metadata { - const char *name; - int nb_args; - const char **types; - const char **args; -}; - -#ifdef CONFIG_FTRACE_SYSCALLS -extern void arch_init_ftrace_syscalls(void); -extern struct syscall_metadata *syscall_nr_to_meta(int nr); -extern void start_ftrace_syscalls(void); -extern void stop_ftrace_syscalls(void); -extern void ftrace_syscall_enter(struct pt_regs *regs); -extern void ftrace_syscall_exit(struct pt_regs *regs); -#else -static inline void start_ftrace_syscalls(void) { } -static inline void stop_ftrace_syscalls(void) { } -static inline void ftrace_syscall_enter(struct pt_regs *regs) { } -static inline void ftrace_syscall_exit(struct pt_regs *regs) { } -#endif - #endif /* _LINUX_FTRACE_H */ diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h index 6470f74..dabe4ad 100644 --- a/include/linux/syscalls.h +++ b/include/linux/syscalls.h @@ -65,7 +65,7 @@ struct old_linux_dirent; #include #include #include -#include +#include #define __SC_DECL1(t1, a1) t1 a1 #define __SC_DECL2(t2, a2, ...) t2 a2, __SC_DECL1(__VA_ARGS__) -- cgit v1.1 From 97c18e2c7a8e36d2d83d50ee070314aadac73a11 Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Thu, 9 Apr 2009 10:35:47 +0800 Subject: module: try_then_request_module must wait Since the whole point of try_then_request_module is to retry the operation after a module has been loaded, we must wait for the module to fully load. Otherwise all sort of things start breaking, e.g., you won't be able to read your encrypted disks on the first attempt. Signed-off-by: Herbert Xu Tested-by: Maciej Rutecki Tested-by: Patrick McHardy Signed-off-by: Linus Torvalds --- include/linux/kmod.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/kmod.h b/include/linux/kmod.h index d5fa565..384ca8b 100644 --- a/include/linux/kmod.h +++ b/include/linux/kmod.h @@ -34,7 +34,7 @@ extern int __request_module(bool wait, const char *name, ...) \ #define request_module(mod...) __request_module(true, mod) #define request_module_nowait(mod...) __request_module(false, mod) #define try_then_request_module(x, mod...) \ - ((x) ?: (__request_module(false, mod), (x))) + ((x) ?: (__request_module(true, mod), (x))) #else static inline int request_module(const char *name, ...) { return -ENOSYS; } static inline int request_module_nowait(const char *name, ...) { return -ENOSYS; } -- cgit v1.1 From 8f7c2c37319a81ef4c2bfdec67b1ccd5744d97e4 Mon Sep 17 00:00:00 2001 From: Zhaolei Date: Wed, 8 Apr 2009 16:58:57 +0800 Subject: Make __stringify support variable argument macros too For example: __stringify(__entry->irq, __entry->ret) will now convert it to: "REC->irq, REC->ret" It also still supports single arguments as the old macro did. Signed-off-by: Zhao Lei Acked-by: Frederic Weisbecker Cc: Steven Rostedt LKML-Reference: <49DC6751.30308@cn.fujitsu.com> Signed-off-by: Ingo Molnar --- include/linux/stringify.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/stringify.h b/include/linux/stringify.h index 0b43883..841cec8 100644 --- a/include/linux/stringify.h +++ b/include/linux/stringify.h @@ -6,7 +6,7 @@ * converts to "bar". */ -#define __stringify_1(x) #x -#define __stringify(x) __stringify_1(x) +#define __stringify_1(x...) #x +#define __stringify(x...) __stringify_1(x) #endif /* !__LINUX_STRINGIFY_H */ -- cgit v1.1 From 066123a535927b3f17cac2305258cc71abdb0d92 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 10 Apr 2009 12:02:40 -0700 Subject: percpu: unbreak alpha percpu For the time being, move the generic percpu_*() accessors to linux/percpu.h. asm-generic/percpu.h is meant to carry generic stuff for low level stuff - declarations, definitions and pointer offset calculation and so on but not for generic interface. Signed-off-by: Ingo Molnar --- include/linux/percpu.h | 52 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) (limited to 'include/linux') diff --git a/include/linux/percpu.h b/include/linux/percpu.h index ee5615d..cfda2d5 100644 --- a/include/linux/percpu.h +++ b/include/linux/percpu.h @@ -168,4 +168,56 @@ static inline void free_percpu(void *p) #define alloc_percpu(type) (type *)__alloc_percpu(sizeof(type), \ __alignof__(type)) +/* + * Optional methods for optimized non-lvalue per-cpu variable access. + * + * @var can be a percpu variable or a field of it and its size should + * equal char, int or long. percpu_read() evaluates to a lvalue and + * all others to void. + * + * These operations are guaranteed to be atomic w.r.t. preemption. + * The generic versions use plain get/put_cpu_var(). Archs are + * encouraged to implement single-instruction alternatives which don't + * require preemption protection. + */ +#ifndef percpu_read +# define percpu_read(var) \ + ({ \ + typeof(per_cpu_var(var)) __tmp_var__; \ + __tmp_var__ = get_cpu_var(var); \ + put_cpu_var(var); \ + __tmp_var__; \ + }) +#endif + +#define __percpu_generic_to_op(var, val, op) \ +do { \ + get_cpu_var(var) op val; \ + put_cpu_var(var); \ +} while (0) + +#ifndef percpu_write +# define percpu_write(var, val) __percpu_generic_to_op(var, (val), =) +#endif + +#ifndef percpu_add +# define percpu_add(var, val) __percpu_generic_to_op(var, (val), +=) +#endif + +#ifndef percpu_sub +# define percpu_sub(var, val) __percpu_generic_to_op(var, (val), -=) +#endif + +#ifndef percpu_and +# define percpu_and(var, val) __percpu_generic_to_op(var, (val), &=) +#endif + +#ifndef percpu_or +# define percpu_or(var, val) __percpu_generic_to_op(var, (val), |=) +#endif + +#ifndef percpu_xor +# define percpu_xor(var, val) __percpu_generic_to_op(var, (val), ^=) +#endif + #endif /* __LINUX_PERCPU_H */ -- cgit v1.1 From fd746d540abf8c686f5f868ae62112692e684088 Mon Sep 17 00:00:00 2001 From: Eric Miao Date: Sat, 11 Apr 2009 16:54:59 -0700 Subject: Input: ads7846 - introduce platform specific way to synchronize sampling Noises can be introduced when LCD signals are being driven, some platforms provide a signal to assist the synchronization of this sampling procedure. Signed-off-by: Eric Miao Signed-off-by: Andrew Morton Signed-off-by: Dmitry Torokhov --- include/linux/spi/ads7846.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/spi/ads7846.h b/include/linux/spi/ads7846.h index 05eab2f..2ea2032 100644 --- a/include/linux/spi/ads7846.h +++ b/include/linux/spi/ads7846.h @@ -51,5 +51,6 @@ struct ads7846_platform_data { void **filter_data); int (*filter) (void *filter_data, int data_idx, int *val); void (*filter_cleanup)(void *filter_data); + void (*wait_for_sync)(void); }; -- cgit v1.1 From 9eeba6138cefc0435695463ddadb0d95e0a6bcd2 Mon Sep 17 00:00:00 2001 From: Frederic Weisbecker Date: Sat, 11 Apr 2009 03:17:17 +0200 Subject: lockdep: warn about lockdep disabling after kernel taint Impact: provide useful missing info for developers Kernel taint can occur in several situations such as warnings, load of prorietary or staging modules, bad page, etc... But when such taint happens, a developer might still be working on the kernel, expecting that lockdep is still enabled. But a taint disables lockdep without ever warning about it. Such a kernel behaviour doesn't really help for kernel development. This patch adds this missing warning. Since the taint is done most of the time after the main message that explain the real source issue, it seems safe to warn about it inside add_taint() so that it appears at last, without hurting the main information. v2: Use a generic helper to disable lockdep instead of an open coded xchg(). Signed-off-by: Frederic Weisbecker Cc: Peter Zijlstra LKML-Reference: <1239412638-6739-1-git-send-email-fweisbec@gmail.com> Signed-off-by: Ingo Molnar --- include/linux/debug_locks.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'include/linux') diff --git a/include/linux/debug_locks.h b/include/linux/debug_locks.h index 096476f..493dedb 100644 --- a/include/linux/debug_locks.h +++ b/include/linux/debug_locks.h @@ -2,12 +2,19 @@ #define __LINUX_DEBUG_LOCKING_H #include +#include struct task_struct; extern int debug_locks; extern int debug_locks_silent; + +static inline int __debug_locks_off(void) +{ + return xchg(&debug_locks, 0); +} + /* * Generic 'turn off all lock debugging' function: */ -- cgit v1.1 From c758e8cffe3b1bc7970d579371db01b19ff440bf Mon Sep 17 00:00:00 2001 From: Ben Hutchings Date: Mon, 13 Apr 2009 17:02:14 +0200 Subject: i2c: Fix sparse warnings for I2C_BOARD_INFO() Since the first argument to I2C_BOARD_INFO() must be a string constant, there is no need to parenthesise it, and adding parentheses results in an invalid initialiser for char[]. gcc obviously accepts this syntax as an extension, but sparse complains, e.g.: drivers/net/sfc/boards.c:173:2: warning: array initialized from parenthesized string constant Therefore, remove the parentheses. Signed-off-by: Ben Hutchings Signed-off-by: Jean Delvare --- include/linux/i2c.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 00ee11e..ad25805 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -274,7 +274,7 @@ struct i2c_board_info { * are provided using conventional syntax. */ #define I2C_BOARD_INFO(dev_type, dev_addr) \ - .type = (dev_type), .addr = (dev_addr) + .type = dev_type, .addr = (dev_addr) /* Add-on boards should register/unregister their devices; e.g. a board -- cgit v1.1 From 0ad30b8fd5fe798aae80df6344b415d8309342cc Mon Sep 17 00:00:00 2001 From: "Serge E. Hallyn" Date: Mon, 13 Apr 2009 09:56:14 -0500 Subject: add some long-missing capabilities to fs_mask When POSIX capabilities were introduced during the 2.1 Linux cycle, the fs mask, which represents the capabilities which having fsuid==0 is supposed to grant, did not include CAP_MKNOD and CAP_LINUX_IMMUTABLE. However, before capabilities the privilege to call these did in fact depend upon fsuid==0. This patch introduces those capabilities into the fsmask, restoring the old behavior. See the thread starting at http://lkml.org/lkml/2009/3/11/157 for reference. Note that if this fix is deemed valid, then earlier kernel versions (2.4 and 2.2) ought to be fixed too. Changelog: [Mar 23] Actually delete old CAP_FS_SET definition... [Mar 20] Updated against J. Bruce Fields's patch Reported-by: Igor Zhbanov Signed-off-by: Serge E. Hallyn Cc: stable@kernel.org Cc: J. Bruce Fields Signed-off-by: Linus Torvalds --- include/linux/capability.h | 23 +++++++++++++++++++---- 1 file changed, 19 insertions(+), 4 deletions(-) (limited to 'include/linux') diff --git a/include/linux/capability.h b/include/linux/capability.h index 4864a43..c302110 100644 --- a/include/linux/capability.h +++ b/include/linux/capability.h @@ -377,7 +377,21 @@ struct cpu_vfs_cap_data { #define CAP_FOR_EACH_U32(__capi) \ for (__capi = 0; __capi < _KERNEL_CAPABILITY_U32S; ++__capi) +/* + * CAP_FS_MASK and CAP_NFSD_MASKS: + * + * The fs mask is all the privileges that fsuid==0 historically meant. + * At one time in the past, that included CAP_MKNOD and CAP_LINUX_IMMUTABLE. + * + * It has never meant setting security.* and trusted.* xattrs. + * + * We could also define fsmask as follows: + * 1. CAP_FS_MASK is the privilege to bypass all fs-related DAC permissions + * 2. The security.* and trusted.* xattrs are fs-related MAC permissions + */ + # define CAP_FS_MASK_B0 (CAP_TO_MASK(CAP_CHOWN) \ + | CAP_TO_MASK(CAP_MKNOD) \ | CAP_TO_MASK(CAP_DAC_OVERRIDE) \ | CAP_TO_MASK(CAP_DAC_READ_SEARCH) \ | CAP_TO_MASK(CAP_FOWNER) \ @@ -392,11 +406,12 @@ struct cpu_vfs_cap_data { # define CAP_EMPTY_SET ((kernel_cap_t){{ 0, 0 }}) # define CAP_FULL_SET ((kernel_cap_t){{ ~0, ~0 }}) # define CAP_INIT_EFF_SET ((kernel_cap_t){{ ~CAP_TO_MASK(CAP_SETPCAP), ~0 }}) -# define CAP_FS_SET ((kernel_cap_t){{ CAP_FS_MASK_B0, CAP_FS_MASK_B1 } }) +# define CAP_FS_SET ((kernel_cap_t){{ CAP_FS_MASK_B0 \ + | CAP_TO_MASK(CAP_LINUX_IMMUTABLE), \ + CAP_FS_MASK_B1 } }) # define CAP_NFSD_SET ((kernel_cap_t){{ CAP_FS_MASK_B0 \ - | CAP_TO_MASK(CAP_SYS_RESOURCE) \ - | CAP_TO_MASK(CAP_MKNOD), \ - CAP_FS_MASK_B1 } }) + | CAP_TO_MASK(CAP_SYS_RESOURCE), \ + CAP_FS_MASK_B1 } }) #endif /* _KERNEL_CAPABILITY_U32S != 2 */ -- cgit v1.1 From a8729eb302a5b5da8b0b4d29582c42648a2e0f12 Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Tue, 7 Apr 2009 02:01:42 +0000 Subject: phylib: Allow early-out in phy_change Marvell 88E1121R Dual PHY device can be hardware-configured to use shared interrupt pin for both PHY ports. For such PHY configurations using shared PHY interrupt phy_interrupt() handler will also schedule a work for PHY port which didn't cause an interrupt. This patch adds a possibility for PHY drivers to provide did_interrupt() function which reports if the PHY (or a PHY port in a multi-PHY device) generated an interrupt. This function is called in phy_change() as phy_change() shouldn't proceed if it is invoked for a PHY which didn't cause an interrupt. So check for interrupt originator in phy_change() to allow early-out. Signed-off-by: Anatolij Gustschin Signed-off-by: David S. Miller --- include/linux/phy.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/phy.h b/include/linux/phy.h index 32cf14a..97e40cb 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -388,6 +388,12 @@ struct phy_driver { /* Enables or disables interrupts */ int (*config_intr)(struct phy_device *phydev); + /* + * Checks if the PHY generated an interrupt. + * For multi-PHY devices with shared PHY interrupt pin + */ + int (*did_interrupt)(struct phy_device *phydev); + /* Clears up any memory if needed */ void (*remove)(struct phy_device *phydev); -- cgit v1.1 From ebde441177da3bad156701d351509f34295282ab Mon Sep 17 00:00:00 2001 From: Michal Januszewski Date: Mon, 13 Apr 2009 14:39:41 -0700 Subject: fbdev: fix color component field length documentation The documentation about the meaning of the color component bitfield lengths in pseudocolor modes is inconsistent. Fix it, so that it indicates the correct interpretation everywhere, i.e. that 1 << length is the number of palette entries. Signed-off-by: Michal Januszewski Acked-by: Krzysztof Helt Cc: Acked-by: Geert Uytterhoeven Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/fb.h | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/fb.h b/include/linux/fb.h index f563c50..330c4b1 100644 --- a/include/linux/fb.h +++ b/include/linux/fb.h @@ -173,8 +173,12 @@ struct fb_fix_screeninfo { /* Interpretation of offset for color fields: All offsets are from the right, * inside a "pixel" value, which is exactly 'bits_per_pixel' wide (means: you * can use the offset as right argument to <<). A pixel afterwards is a bit - * stream and is written to video memory as that unmodified. This implies - * big-endian byte order if bits_per_pixel is greater than 8. + * stream and is written to video memory as that unmodified. + * + * For pseudocolor: offset and length should be the same for all color + * components. Offset specifies the position of the least significant bit + * of the pallette index in a pixel value. Length indicates the number + * of available palette entries (i.e. # of entries = 1 << length). */ struct fb_bitfield { __u32 offset; /* beginning of bitfield */ -- cgit v1.1 From 251eb40f5ccd07a905633a816fbf8f2b6b25cced Mon Sep 17 00:00:00 2001 From: Jonathan Cameron Date: Mon, 13 Apr 2009 14:39:45 -0700 Subject: hwmon: sht15 humidity sensor driver Data sheet at: http://www.sensirion.ch/en/pdf/product_information/Datasheet-humidity-sensor-SHT1x.pdf These sensors communicate over a 2 wire bus running a device specific protocol. The complexity of the driver is mainly due to handling the substantial delays between requesting a reading and the device pulling the data line low to indicate that the data is available. This is handled by an interrupt that is disabled under all other conditions. I wasn't terribly clear on the best way to handle this, so comments on that aspect would be particularly welcome! Interpretation of the temperature depends on knowing the supply voltage. If configured in a board config as a regulator consumer this is obtained from the regulator subsystem. If not it should be provided in the platform data. I've placed this driver in the hwmon subsystem as it is definitely a device that may be used for hardware monitoring and with it's relatively slow response times (up to 120 millisecs to get a reading) a caching strategy certainly seems to make sense! Signed-off-by: Jonathan Cameron Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/sht15.h | 24 ++++++++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 include/linux/sht15.h (limited to 'include/linux') diff --git a/include/linux/sht15.h b/include/linux/sht15.h new file mode 100644 index 0000000..046bce0 --- /dev/null +++ b/include/linux/sht15.h @@ -0,0 +1,24 @@ +/* + * sht15.h - support for the SHT15 Temperature and Humidity Sensor + * + * Copyright (c) 2009 Jonathan Cameron + * + * Copyright (c) 2007 Wouter Horre + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/** + * struct sht15_platform_data - sht15 connectivity info + * @gpio_data: no. of gpio to which bidirectional data line is connected + * @gpio_sck: no. of gpio to which the data clock is connected. + * @supply_mv: supply voltage in mv. Overridden by regulator if available. + **/ +struct sht15_platform_data { + int gpio_data; + int gpio_sck; + int supply_mv; +}; + -- cgit v1.1 From 17a5138d204014b00cb9c1d6e8ff311993041b5c Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Mon, 13 Apr 2009 14:39:47 -0700 Subject: aio: remove INIT_KIOCTX Unused after 20dcae32439384b6863c626bb3b2a09bed65b33e aka "[PATCH] aio: remove kioctx from mm_struct". Signed-off-by: Alexey Dobriyan Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/init_task.h | 13 ------------- 1 file changed, 13 deletions(-) (limited to 'include/linux') diff --git a/include/linux/init_task.h b/include/linux/init_task.h index dcfb933..d87247d 100644 --- a/include/linux/init_task.h +++ b/include/linux/init_task.h @@ -15,19 +15,6 @@ extern struct files_struct init_files; extern struct fs_struct init_fs; -#define INIT_KIOCTX(name, which_mm) \ -{ \ - .users = ATOMIC_INIT(1), \ - .dead = 0, \ - .mm = &which_mm, \ - .user_id = 0, \ - .next = NULL, \ - .wait = __WAIT_QUEUE_HEAD_INITIALIZER(name.wait), \ - .ctx_lock = __SPIN_LOCK_UNLOCKED(name.ctx_lock), \ - .reqs_active = 0U, \ - .max_reqs = ~0U, \ -} - #define INIT_MM(name) \ { \ .mm_rb = RB_ROOT, \ -- cgit v1.1 From 5dec8bfbdd4921522565a7b0e0c8760ae042ef6d Mon Sep 17 00:00:00 2001 From: Eric Sandeen Date: Mon, 13 Apr 2009 14:39:54 -0700 Subject: include/linux/fiemap.h: include types.h now that it's exported Include in fiemap.h. Sam Ravnborg pointed out that this was missing in this newly-exported header which uses the __u32 and __u64 types. Signed-off-by: Eric Sandeen Cc: Sam Ravnborg Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/fiemap.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/fiemap.h b/include/linux/fiemap.h index 671decb..934e22d 100644 --- a/include/linux/fiemap.h +++ b/include/linux/fiemap.h @@ -11,6 +11,8 @@ #ifndef _LINUX_FIEMAP_H #define _LINUX_FIEMAP_H +#include + struct fiemap_extent { __u64 fe_logical; /* logical offset in bytes for the start of * the extent from the beginning of the file */ -- cgit v1.1 From 347486bb108fa6e0fd2753c1be3519d6be2516ed Mon Sep 17 00:00:00 2001 From: Stefan Husemann Date: Mon, 13 Apr 2009 14:40:10 -0700 Subject: intelfb: support i854 Support the Intel 854 Chipset in fbdev. We test and use the patch on a Thomson IP1101 IPTV-Box. On the VGA-Port we get a normal signal. Here is the link to the Mambux-Project: http://www.mambux.de Cc: Keith Packard Cc: Dave Airlie Cc: Krzysztof Helt Signed-off-by: Stefan Husemann Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/pci_ids.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index ee98cd5..06ba90c 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -2514,6 +2514,8 @@ #define PCI_DEVICE_ID_INTEL_IOAT_TBG3 0x3433 #define PCI_DEVICE_ID_INTEL_82830_HB 0x3575 #define PCI_DEVICE_ID_INTEL_82830_CGC 0x3577 +#define PCI_DEVICE_ID_INTEL_82854_HB 0x358c +#define PCI_DEVICE_ID_INTEL_82854_IG 0x358e #define PCI_DEVICE_ID_INTEL_82855GM_HB 0x3580 #define PCI_DEVICE_ID_INTEL_82855GM_IG 0x3582 #define PCI_DEVICE_ID_INTEL_E7520_MCH 0x3590 -- cgit v1.1 From 27b19565fe4ca5b0e9d2ae98ce4b81ca728bf445 Mon Sep 17 00:00:00 2001 From: Ingo Molnar Date: Tue, 14 Apr 2009 11:03:12 +0200 Subject: lockdep: warn about lockdep disabling after kernel taint, fix Impact: build fix for Sparc and s390 Stephen Rothwell reported that the Sparc build broke: In file included from kernel/panic.c:12: include/linux/debug_locks.h: In function '__debug_locks_off': include/linux/debug_locks.h:15: error: implicit declaration of function 'xchg' due to: 9eeba61: lockdep: warn about lockdep disabling after kernel taint There is some inconsistency between architectures about where exactly xchg() is defined. The traditional place is in system.h but the more logical point for it is in atomic.h - where most architectures (especially new ones) have it defined. These architecture also still offer it via system.h. Some, such as Sparc or s390 only have it in asm/system.h and not available via asm/atomic.h at all. Use the widest set of headers in debug_locks.h and also include asm/system.h. Reported-by: Stephen Rothwell Cc: Frederic Weisbecker Cc: "David S. Miller" Cc: Linus Torvalds LKML-Reference: <20090414144317.026498df.sfr@canb.auug.org.au> Signed-off-by: Ingo Molnar --- include/linux/debug_locks.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/debug_locks.h b/include/linux/debug_locks.h index 493dedb..29b3ce3 100644 --- a/include/linux/debug_locks.h +++ b/include/linux/debug_locks.h @@ -3,6 +3,7 @@ #include #include +#include struct task_struct; -- cgit v1.1 From ef631b0ca01655d24e9ca7e199262c4a46416a26 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Mon, 13 Apr 2009 21:31:16 -0700 Subject: rcu: Make hierarchical RCU less IPI-happy This patch fixes a hierarchical-RCU performance bug located by Anton Blanchard. The problem stems from a misguided attempt to provide a work-around for jiffies-counter failure. This work-around uses a per-CPU n_rcu_pending counter, which is incremented on each call to rcu_pending(), which in turn is called from each scheduling-clock interrupt. Each CPU then treats this counter as a surrogate for the jiffies counter, so that if the jiffies counter fails to advance, the per-CPU n_rcu_pending counter will cause RCU to invoke force_quiescent_state(), which in turn will (among other things) send resched IPIs to CPUs that have thus far failed to pass through an RCU quiescent state. Unfortunately, each CPU resets only its own counter after sending a batch of IPIs. This means that the other CPUs will also (needlessly) send -another- round of IPIs, for a full N-squared set of IPIs in the worst case every three scheduler-clock ticks until the grace period finally ends. It is not reasonable for a given CPU to reset each and every n_rcu_pending for all the other CPUs, so this patch instead simply disables the jiffies-counter "training wheels", thus eliminating the excessive IPIs. Note that the jiffies-counter IPIs do not have this problem due to the fact that the jiffies counter is global, so that the CPU sending the IPIs can easily reset things, thus preventing the other CPUs from sending redundant IPIs. Note also that the n_rcu_pending counter remains, as it will continue to be used for tracing. It may also see use to update the jiffies counter, should an appropriate kick-the-jiffies-counter API appear. Located-by: Anton Blanchard Tested-by: Anton Blanchard Signed-off-by: Paul E. McKenney Cc: anton@samba.org Cc: akpm@linux-foundation.org Cc: dipankar@in.ibm.com Cc: manfred@colorfullife.com Cc: cl@linux-foundation.org Cc: josht@linux.vnet.ibm.com Cc: schamp@sgi.com Cc: niv@us.ibm.com Cc: dvhltc@us.ibm.com Cc: ego@in.ibm.com Cc: laijs@cn.fujitsu.com Cc: rostedt@goodmis.org Cc: peterz@infradead.org Cc: penberg@cs.helsinki.fi Cc: andi@firstfloor.org Cc: "Paul E. McKenney" LKML-Reference: <12396834793575-git-send-email-> Signed-off-by: Ingo Molnar --- include/linux/rcutree.h | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/rcutree.h b/include/linux/rcutree.h index 0cdda00..58b2aa5 100644 --- a/include/linux/rcutree.h +++ b/include/linux/rcutree.h @@ -161,9 +161,8 @@ struct rcu_data { unsigned long offline_fqs; /* Kicked due to being offline. */ unsigned long resched_ipi; /* Sent a resched IPI. */ - /* 5) state to allow this CPU to force_quiescent_state on others */ + /* 5) For future __rcu_pending statistics. */ long n_rcu_pending; /* rcu_pending() calls since boot. */ - long n_rcu_pending_force_qs; /* when to force quiescent states. */ int cpu; }; -- cgit v1.1 From 67c457a8c378a006a34d92f9bd3078a80a92f250 Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Tue, 14 Apr 2009 07:50:56 -0400 Subject: jbd2: use SWRITE_SYNC_PLUG when writing synchronous revoke records The revoke records must be written using the same way as the rest of the blocks during the commit process; that is, either marked as synchronous writes or as asynchornous writes. Signed-off-by: "Theodore Ts'o" --- include/linux/jbd2.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/jbd2.h b/include/linux/jbd2.h index 8815a34..cc02393 100644 --- a/include/linux/jbd2.h +++ b/include/linux/jbd2.h @@ -1193,7 +1193,8 @@ extern int jbd2_journal_init_revoke_caches(void); extern void jbd2_journal_destroy_revoke(journal_t *); extern int jbd2_journal_revoke (handle_t *, unsigned long long, struct buffer_head *); extern int jbd2_journal_cancel_revoke(handle_t *, struct journal_head *); -extern void jbd2_journal_write_revoke_records(journal_t *, transaction_t *); +extern void jbd2_journal_write_revoke_records(journal_t *, + transaction_t *, int); /* Recovery revoke support */ extern int jbd2_journal_set_revoke(journal_t *, unsigned long long, tid_t); -- cgit v1.1 From 38d726d153cfe5efe5fe22d28d36ab382dda3a5c Mon Sep 17 00:00:00 2001 From: Theodore Ts'o Date: Tue, 14 Apr 2009 10:10:47 -0400 Subject: jbd: use SWRITE_SYNC_PLUG when writing synchronous revoke records The revoke records must be written using the same way as the rest of the blocks during the commit process; that is, either marked as synchronous writes or as asynchornous writes. Signed-off-by: "Theodore Ts'o" --- include/linux/jbd.h | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/jbd.h b/include/linux/jbd.h index 53ae439..c2049a0 100644 --- a/include/linux/jbd.h +++ b/include/linux/jbd.h @@ -978,7 +978,8 @@ extern void journal_destroy_revoke(journal_t *); extern int journal_revoke (handle_t *, unsigned long, struct buffer_head *); extern int journal_cancel_revoke(handle_t *, struct journal_head *); -extern void journal_write_revoke_records(journal_t *, transaction_t *); +extern void journal_write_revoke_records(journal_t *, + transaction_t *, int); /* Recovery revoke support */ extern int journal_set_revoke(journal_t *, unsigned long, tid_t); -- cgit v1.1 From 78c5b82ee68207a176ad5ca5eabdb2dbe5cfbfd3 Mon Sep 17 00:00:00 2001 From: Leandro Dorileo Date: Tue, 14 Apr 2009 14:59:51 +0100 Subject: tty: Update some of the USB kernel doc Updates some usb_serial_port members documentation. Signed-off-by: Leandro Dorileo Signed-off-by: Alan Cox Signed-off-by: Linus Torvalds --- include/linux/usb/serial.h | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index b958425..625e9e4 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -29,7 +29,7 @@ /** * usb_serial_port: structure for the specific ports of a device. * @serial: pointer back to the struct usb_serial owner of this port. - * @tty: pointer to the corresponding tty for this port. + * @port: pointer to the corresponding tty_port for this port. * @lock: spinlock to grab when updating portions of this structure. * @mutex: mutex used to synchronize serial_open() and serial_close() * access for this port. @@ -44,19 +44,22 @@ * @interrupt_out_endpointAddress: endpoint address for the interrupt out pipe * for this port. * @bulk_in_buffer: pointer to the bulk in buffer for this port. + * @bulk_in_size: the size of the bulk_in_buffer, in bytes. * @read_urb: pointer to the bulk in struct urb for this port. * @bulk_in_endpointAddress: endpoint address for the bulk in pipe for this * port. * @bulk_out_buffer: pointer to the bulk out buffer for this port. * @bulk_out_size: the size of the bulk_out_buffer, in bytes. * @write_urb: pointer to the bulk out struct urb for this port. + * @write_urb_busy: port`s writing status * @bulk_out_endpointAddress: endpoint address for the bulk out pipe for this * port. * @write_wait: a wait_queue_head_t used by the port. * @work: work queue entry for the line discipline waking up. - * @open_count: number of times this port has been opened. * @throttled: nonzero if the read urb is inactive to throttle the device * @throttle_req: nonzero if the tty wants to throttle us + * @console: attached usb serial console + * @dev: pointer to the serial device * * This structure is used by the usb-serial core and drivers for the specific * ports of a device. -- cgit v1.1 From 8f3d8ba20e67991b531e9c0227dcd1f99271a32c Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Tue, 7 Apr 2009 19:55:13 +0200 Subject: block: move bio list helpers into bio.h It's used by DM and MD and generally useful, so move the bio list helpers into bio.h. Signed-off-by: Christoph Hellwig Acked-by: Alasdair G Kergon Signed-off-by: Jens Axboe --- include/linux/bio.h | 109 ++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 109 insertions(+) (limited to 'include/linux') diff --git a/include/linux/bio.h b/include/linux/bio.h index b900d2c6..b89cf2d 100644 --- a/include/linux/bio.h +++ b/include/linux/bio.h @@ -504,6 +504,115 @@ static inline int bio_has_data(struct bio *bio) return bio && bio->bi_io_vec != NULL; } +/* + * BIO list managment for use by remapping drivers (e.g. DM or MD). + * + * A bio_list anchors a singly-linked list of bios chained through the bi_next + * member of the bio. The bio_list also caches the last list member to allow + * fast access to the tail. + */ +struct bio_list { + struct bio *head; + struct bio *tail; +}; + +static inline int bio_list_empty(const struct bio_list *bl) +{ + return bl->head == NULL; +} + +static inline void bio_list_init(struct bio_list *bl) +{ + bl->head = bl->tail = NULL; +} + +#define bio_list_for_each(bio, bl) \ + for (bio = (bl)->head; bio; bio = bio->bi_next) + +static inline unsigned bio_list_size(const struct bio_list *bl) +{ + unsigned sz = 0; + struct bio *bio; + + bio_list_for_each(bio, bl) + sz++; + + return sz; +} + +static inline void bio_list_add(struct bio_list *bl, struct bio *bio) +{ + bio->bi_next = NULL; + + if (bl->tail) + bl->tail->bi_next = bio; + else + bl->head = bio; + + bl->tail = bio; +} + +static inline void bio_list_add_head(struct bio_list *bl, struct bio *bio) +{ + bio->bi_next = bl->head; + + bl->head = bio; + + if (!bl->tail) + bl->tail = bio; +} + +static inline void bio_list_merge(struct bio_list *bl, struct bio_list *bl2) +{ + if (!bl2->head) + return; + + if (bl->tail) + bl->tail->bi_next = bl2->head; + else + bl->head = bl2->head; + + bl->tail = bl2->tail; +} + +static inline void bio_list_merge_head(struct bio_list *bl, + struct bio_list *bl2) +{ + if (!bl2->head) + return; + + if (bl->head) + bl2->tail->bi_next = bl->head; + else + bl->tail = bl2->tail; + + bl->head = bl2->head; +} + +static inline struct bio *bio_list_pop(struct bio_list *bl) +{ + struct bio *bio = bl->head; + + if (bio) { + bl->head = bl->head->bi_next; + if (!bl->head) + bl->tail = NULL; + + bio->bi_next = NULL; + } + + return bio; +} + +static inline struct bio *bio_list_get(struct bio_list *bl) +{ + struct bio *bio = bl->head; + + bl->head = bl->tail = NULL; + + return bio; +} + #if defined(CONFIG_BLK_DEV_INTEGRITY) #define bip_vec_idx(bip, idx) (&(bip->bip_vec[(idx)])) -- cgit v1.1 From 48e70bc18ac81881dedd3aa327c55b924fc41ecf Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Tue, 14 Apr 2009 08:19:27 +0200 Subject: Document and move the various READ/WRITE types It's a somewhat twisty maze of hints and behavioural modifiers, try and clear it up a bit with some documentation. Signed-off-by: Jens Axboe --- include/linux/fs.h | 59 ++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 59 insertions(+) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index 562d285..b535aec4 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -87,6 +87,60 @@ struct inodes_stat_t { */ #define FMODE_NOCMTIME ((__force fmode_t)2048) +/* + * The below are the various read and write types that we support. Some of + * them include behavioral modifiers that send information down to the + * block layer and IO scheduler. Terminology: + * + * The block layer uses device plugging to defer IO a little bit, in + * the hope that we will see more IO very shortly. This increases + * coalescing of adjacent IO and thus reduces the number of IOs we + * have to send to the device. It also allows for better queuing, + * if the IO isn't mergeable. If the caller is going to be waiting + * for the IO, then he must ensure that the device is unplugged so + * that the IO is dispatched to the driver. + * + * All IO is handled async in Linux. This is fine for background + * writes, but for reads or writes that someone waits for completion + * on, we want to notify the block layer and IO scheduler so that they + * know about it. That allows them to make better scheduling + * decisions. So when the below references 'sync' and 'async', it + * is referencing this priority hint. + * + * With that in mind, the available types are: + * + * READ A normal read operation. Device will be plugged. + * READ_SYNC A synchronous read. Device is not plugged, caller can + * immediately wait on this read without caring about + * unplugging. + * READA Used for read-ahead operations. Lower priority, and the + * block layer could (in theory) choose to ignore this + * request if it runs into resource problems. + * WRITE A normal async write. Device will be plugged. + * SWRITE Like WRITE, but a special case for ll_rw_block() that + * tells it to lock the buffer first. Normally a buffer + * must be locked before doing IO. + * WRITE_SYNC_PLUG Synchronous write. Identical to WRITE, but passes down + * the hint that someone will be waiting on this IO + * shortly. The device must still be unplugged explicitly, + * WRITE_SYNC_PLUG does not do this as we could be + * submitting more writes before we actually wait on any + * of them. + * WRITE_SYNC Like WRITE_SYNC_PLUG, but also unplugs the device + * immediately after submission. The write equivalent + * of READ_SYNC. + * WRITE_ODIRECT Special case write for O_DIRECT only. + * SWRITE_SYNC + * SWRITE_SYNC_PLUG Like WRITE_SYNC/WRITE_SYNC_PLUG, but locks the buffer. + * See SWRITE. + * WRITE_BARRIER Like WRITE, but tells the block layer that all + * previously submitted writes must be safely on storage + * before this one is started. Also guarantees that when + * this write is complete, it itself is also safely on + * storage. Prevents reordering of writes on both sides + * of this IO. + * + */ #define RW_MASK 1 #define RWA_MASK 2 #define READ 0 @@ -102,6 +156,11 @@ struct inodes_stat_t { (SWRITE | (1 << BIO_RW_SYNCIO) | (1 << BIO_RW_NOIDLE)) #define SWRITE_SYNC (SWRITE_SYNC_PLUG | (1 << BIO_RW_UNPLUG)) #define WRITE_BARRIER (WRITE | (1 << BIO_RW_BARRIER)) + +/* + * These aren't really reads or writes, they pass down information about + * parts of device that are now unused by the file system. + */ #define DISCARD_NOBARRIER (1 << BIO_RW_DISCARD) #define DISCARD_BARRIER ((1 << BIO_RW_DISCARD) | (1 << BIO_RW_BARRIER)) -- cgit v1.1 From b3c2d2ddd63944ef2a1e4a43077b602288107e01 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Tue, 14 Apr 2009 19:48:36 +0200 Subject: splice: split up __splice_from_pipe() Split up __splice_from_pipe() into four helper functions: splice_from_pipe_begin() splice_from_pipe_next() splice_from_pipe_feed() splice_from_pipe_end() splice_from_pipe_next() will wait (if necessary) for more buffers to be added to the pipe. splice_from_pipe_feed() will feed the buffers to the supplied actor and return when there's no more data available (or if all of the requested data has been copied). This is necessary so that implementations can do locking around the non-waiting splice_from_pipe_feed(). This patch should not cause any change in behavior. Signed-off-by: Miklos Szeredi Signed-off-by: Jens Axboe --- include/linux/splice.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include/linux') diff --git a/include/linux/splice.h b/include/linux/splice.h index 528dcb9..8fc2a63 100644 --- a/include/linux/splice.h +++ b/include/linux/splice.h @@ -36,6 +36,8 @@ struct splice_desc { void *data; /* cookie */ } u; loff_t pos; /* file position */ + size_t num_spliced; /* number of bytes already spliced */ + bool need_wakeup; /* need to wake up writer */ }; struct partial_page { @@ -66,6 +68,14 @@ extern ssize_t splice_from_pipe(struct pipe_inode_info *, struct file *, splice_actor *); extern ssize_t __splice_from_pipe(struct pipe_inode_info *, struct splice_desc *, splice_actor *); +extern int splice_from_pipe_feed(struct pipe_inode_info *, struct splice_desc *, + splice_actor *); +extern int splice_from_pipe_next(struct pipe_inode_info *, + struct splice_desc *); +extern void splice_from_pipe_begin(struct splice_desc *); +extern void splice_from_pipe_end(struct pipe_inode_info *, + struct splice_desc *); + extern ssize_t splice_to_pipe(struct pipe_inode_info *, struct splice_pipe_desc *); extern ssize_t splice_direct_to_actor(struct file *, struct splice_desc *, -- cgit v1.1 From 328eaaba4e41a04c1dc4679d65bea3fee4349d86 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Tue, 14 Apr 2009 19:48:39 +0200 Subject: ocfs2: fix i_mutex locking in ocfs2_splice_to_file() Rearrange locking of i_mutex on destination and call to ocfs2_rw_lock() so locks are only held while buffers are copied with the pipe_to_file() actor, and not while waiting for more data on the pipe. Signed-off-by: Miklos Szeredi Signed-off-by: Jens Axboe --- include/linux/splice.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/splice.h b/include/linux/splice.h index 8fc2a63..5f3faa9 100644 --- a/include/linux/splice.h +++ b/include/linux/splice.h @@ -75,6 +75,8 @@ extern int splice_from_pipe_next(struct pipe_inode_info *, extern void splice_from_pipe_begin(struct splice_desc *); extern void splice_from_pipe_end(struct pipe_inode_info *, struct splice_desc *); +extern int pipe_to_file(struct pipe_inode_info *, struct pipe_buffer *, + struct splice_desc *); extern ssize_t splice_to_pipe(struct pipe_inode_info *, struct splice_pipe_desc *); -- cgit v1.1 From f8cc774ce4844811a55e2352f1443055e3994e28 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Tue, 14 Apr 2009 19:48:40 +0200 Subject: splice: remove generic_file_splice_write_nolock() Remove the now unused generic_file_splice_write_nolock() function. It's conceptually broken anyway, because splice may need to wait for pipe events so holding locks across the whole operation is wrong. Signed-off-by: Miklos Szeredi Signed-off-by: Jens Axboe --- include/linux/fs.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index b535aec4..907d8f5 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2209,8 +2209,6 @@ extern ssize_t generic_file_splice_read(struct file *, loff_t *, struct pipe_inode_info *, size_t, unsigned int); extern ssize_t generic_file_splice_write(struct pipe_inode_info *, struct file *, loff_t *, size_t, unsigned int); -extern ssize_t generic_file_splice_write_nolock(struct pipe_inode_info *, - struct file *, loff_t *, size_t, unsigned int); extern ssize_t generic_splice_sendpage(struct pipe_inode_info *pipe, struct file *out, loff_t *, size_t len, unsigned int flags); extern long do_splice_direct(struct file *in, loff_t *ppos, struct file *out, -- cgit v1.1 From 61e0d47c33cc371f725bcda4a47ae0efe652dba8 Mon Sep 17 00:00:00 2001 From: Miklos Szeredi Date: Tue, 14 Apr 2009 19:48:41 +0200 Subject: splice: add helpers for locking pipe inode There are lots of sequences like this, especially in splice code: if (pipe->inode) mutex_lock(&pipe->inode->i_mutex); /* do something */ if (pipe->inode) mutex_unlock(&pipe->inode->i_mutex); so introduce helpers which do the conditional locking and unlocking. Also replace the inode_double_lock() call with a pipe_double_lock() helper to avoid spreading the use of this functionality beyond the pipe code. This patch is just a cleanup, and should cause no behavioral changes. Signed-off-by: Miklos Szeredi Signed-off-by: Jens Axboe --- include/linux/fs.h | 3 --- include/linux/pipe_fs_i.h | 5 +++++ 2 files changed, 5 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index 907d8f5..e766be0 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -797,9 +797,6 @@ enum inode_i_mutex_lock_class I_MUTEX_QUOTA }; -extern void inode_double_lock(struct inode *inode1, struct inode *inode2); -extern void inode_double_unlock(struct inode *inode1, struct inode *inode2); - /* * NOTE: in a 32bit arch with a preemptable kernel and * an UP compile the i_size_read/write must be atomic diff --git a/include/linux/pipe_fs_i.h b/include/linux/pipe_fs_i.h index 8e41202..c8f0385 100644 --- a/include/linux/pipe_fs_i.h +++ b/include/linux/pipe_fs_i.h @@ -134,6 +134,11 @@ struct pipe_buf_operations { memory allocation, whereas PIPE_BUF makes atomicity guarantees. */ #define PIPE_SIZE PAGE_SIZE +/* Pipe lock and unlock operations */ +void pipe_lock(struct pipe_inode_info *); +void pipe_unlock(struct pipe_inode_info *); +void pipe_double_lock(struct pipe_inode_info *, struct pipe_inode_info *); + /* Drop the inode semaphore and wait for a pipe event, atomically */ void pipe_wait(struct pipe_inode_info *pipe); -- cgit v1.1 From 35c80d5f400f68f2eccf3069d1c068e154bde9c9 Mon Sep 17 00:00:00 2001 From: Chris Mason Date: Wed, 15 Apr 2009 13:22:38 -0400 Subject: Add block_write_full_page_endio for passing endio handler block_write_full_page doesn't allow the caller to control what happens when the IO is over. This adds a new call named block_write_full_page_endio so the buffer head end_io handler can be provided by the caller. This will be used by the ext3 data=guarded mode to do i_size updates in a workqueue based end_io handler. end_buffer_async_write is also exported so it can be called to do the dirty work of managing page writeback for the higher level end_io handler. Signed-off-by: Chris Mason Acked-by: Theodore Tso Acked-by: Jan Kara Signed-off-by: Linus Torvalds --- include/linux/buffer_head.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/buffer_head.h b/include/linux/buffer_head.h index 7b73bb8..16ed028 100644 --- a/include/linux/buffer_head.h +++ b/include/linux/buffer_head.h @@ -155,6 +155,7 @@ void create_empty_buffers(struct page *, unsigned long, unsigned long b_state); void end_buffer_read_sync(struct buffer_head *bh, int uptodate); void end_buffer_write_sync(struct buffer_head *bh, int uptodate); +void end_buffer_async_write(struct buffer_head *bh, int uptodate); /* Things to do with buffers at mapping->private_list */ void mark_buffer_dirty_inode(struct buffer_head *bh, struct inode *inode); @@ -197,6 +198,8 @@ extern int buffer_heads_over_limit; void block_invalidatepage(struct page *page, unsigned long offset); int block_write_full_page(struct page *page, get_block_t *get_block, struct writeback_control *wbc); +int block_write_full_page_endio(struct page *page, get_block_t *get_block, + struct writeback_control *wbc, bh_end_io_t *handler); int block_read_full_page(struct page*, get_block_t*); int block_is_partially_uptodate(struct page *page, read_descriptor_t *desc, unsigned long from); -- cgit v1.1 From 412401029259b1ad67559cec93bcc7ee4a9551aa Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 16 Apr 2009 09:58:44 -0600 Subject: powerpc/5200: Bring the legacy fsl_spi_platform_data hooks back In commit 364fdbc00fbdd409ade63500710123fe323aa164 ("spi_mpc83xx: rework chip selects handling"), I merged activate_cs and deactivate_cs hooks into cs_control, but I overlooked that mpc52xx_psc_spi driver is using these hooks too. And that resulted in the following build failure: CC drivers/spi/mpc52xx_psc_spi.o drivers/spi/mpc52xx_psc_spi.c: In function 'mpc52xx_psc_spi_do_probe': drivers/spi/mpc52xx_psc_spi.c:398: error: 'struct fsl_spi_platform_data' has no member named 'activate_cs' drivers/spi/mpc52xx_psc_spi.c:399: error: 'struct fsl_spi_platform_data' has no member named 'deactivate_cs' make[2]: *** [drivers/spi/mpc52xx_psc_spi.o] Error 1 This patch simply adds the legacy hooks back for 2.6.30, and for 2.6.31 we'll convert the driver to ->cs_control. Reported-by: Subrata Modak Signed-off-by: Anton Vorontsov Signed-off-by: Grant Likely --- include/linux/fsl_devices.h | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h index f2a78b5..0cde180 100644 --- a/include/linux/fsl_devices.h +++ b/include/linux/fsl_devices.h @@ -83,6 +83,10 @@ struct fsl_spi_platform_data { u16 max_chipselect; void (*cs_control)(struct spi_device *spi, bool on); u32 sysclk; + + /* Legacy hooks, used by mpc52xx_psc_spi driver. */ + void (*activate_cs)(u8 cs, u8 polarity); + void (*deactivate_cs)(u8 cs, u8 polarity); }; struct mpc8xx_pcmcia_ops { -- cgit v1.1 From e3cf95dd6d352954b663d2934110d6e30af2406d Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Thu, 9 Apr 2009 17:31:17 +0100 Subject: ata: Report 16/32bit PIO as best we can The legacy old IDE ioctl API for this is a bit primitive so we try and map stuff sensibly onto it. - Set PIO over DMA devices to report 32bit - Add ability to change the PIO32 settings if the controller permits it - Add that functionality into the sff drivers - Add that functionality into the VLB legacy driver - Turn on the 32bit PIO on the ninja32 and add support there Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- include/linux/libata.h | 8 ++++++++ 1 file changed, 8 insertions(+) (limited to 'include/linux') diff --git a/include/linux/libata.h b/include/linux/libata.h index b450a26..3d501db 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -209,6 +209,7 @@ enum { /* bits 24:31 of ap->flags are reserved for LLD specific flags */ + /* struct ata_port pflags */ ATA_PFLAG_EH_PENDING = (1 << 0), /* EH pending */ ATA_PFLAG_EH_IN_PROGRESS = (1 << 1), /* EH in progress */ @@ -225,6 +226,9 @@ enum { ATA_PFLAG_PM_PENDING = (1 << 18), /* PM operation pending */ ATA_PFLAG_INIT_GTM_VALID = (1 << 19), /* initial gtm data valid */ + ATA_PFLAG_PIO32 = (1 << 20), /* 32bit PIO */ + ATA_PFLAG_PIO32CHANGE = (1 << 21), /* 32bit PIO can be turned on/off */ + /* struct ata_queued_cmd flags */ ATA_QCFLAG_ACTIVE = (1 << 0), /* cmd not yet ack'd to scsi lyer */ ATA_QCFLAG_DMAMAP = (1 << 1), /* SG table is DMA mapped */ @@ -689,7 +693,10 @@ struct ata_port { struct Scsi_Host *scsi_host; /* our co-allocated scsi host */ struct ata_port_operations *ops; spinlock_t *lock; + /* Flags owned by the EH context. Only EH should touch these once the + port is active */ unsigned long flags; /* ATA_FLAG_xxx */ + /* Flags that change dynamically, protected by ap->lock */ unsigned int pflags; /* ATA_PFLAG_xxx */ unsigned int print_id; /* user visible unique port ID */ unsigned int port_no; /* 0 based port no. inside the host */ @@ -1595,6 +1602,7 @@ extern void ata_sff_drain_fifo(struct ata_queued_cmd *qc); extern void ata_sff_error_handler(struct ata_port *ap); extern void ata_sff_post_internal_cmd(struct ata_queued_cmd *qc); extern int ata_sff_port_start(struct ata_port *ap); +extern int ata_sff_port_start32(struct ata_port *ap); extern void ata_sff_std_ports(struct ata_ioports *ioaddr); extern unsigned long ata_bmdma_mode_filter(struct ata_device *dev, unsigned long xfer_mask); -- cgit v1.1 From 13977091a988fb0d21821c2221ddc920eba36b79 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Mon, 30 Mar 2009 14:37:25 -0700 Subject: Driver Core: early platform driver V3 of the early platform driver implementation. Platform drivers are great for embedded platforms because we can separate driver configuration from the actual driver. So base addresses, interrupts and other configuration can be kept with the processor or board code, and the platform driver can be reused by many different platforms. For early devices we have nothing today. For instance, to configure early timers and early serial ports we cannot use platform devices. This because the setup order during boot. Timers are needed before the platform driver core code is available. The same goes for early printk support. Early in this case means before initcalls. These early drivers today have their configuration either hard coded or they receive it using some special configuration method. This is working quite well, but if we want to support both regular kernel modules and early devices then we need to have two ways of configuring the same driver. A single way would be better. The early platform driver patch is basically a set of functions that allow drivers to register themselves and architecture code to locate them and probe. Registration happens through early_param(). The time for the probe is decided by the architecture code. See Documentation/driver-model/platform.txt for more details. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Magnus Damm Cc: Paul Mundt Cc: Kay Sievers Cc: David Brownell Cc: Tejun Heo Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- include/linux/init.h | 1 + include/linux/platform_device.h | 42 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 43 insertions(+) (limited to 'include/linux') diff --git a/include/linux/init.h b/include/linux/init.h index 68cb026..f121a7a 100644 --- a/include/linux/init.h +++ b/include/linux/init.h @@ -247,6 +247,7 @@ struct obs_kernel_param { /* Relies on boot_command_line being set */ void __init parse_early_param(void); +void __init parse_early_options(char *cmdline); #endif /* __ASSEMBLY__ */ /** diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h index 76e470a..72736fd 100644 --- a/include/linux/platform_device.h +++ b/include/linux/platform_device.h @@ -77,4 +77,46 @@ extern int platform_driver_probe(struct platform_driver *driver, #define platform_get_drvdata(_dev) dev_get_drvdata(&(_dev)->dev) #define platform_set_drvdata(_dev,data) dev_set_drvdata(&(_dev)->dev, (data)) +/* early platform driver interface */ +struct early_platform_driver { + const char *class_str; + struct platform_driver *pdrv; + struct list_head list; + int requested_id; +}; + +#define EARLY_PLATFORM_ID_UNSET -2 +#define EARLY_PLATFORM_ID_ERROR -3 + +extern int early_platform_driver_register(struct early_platform_driver *epdrv, + char *buf); +extern void early_platform_add_devices(struct platform_device **devs, int num); + +static inline int is_early_platform_device(struct platform_device *pdev) +{ + return !pdev->dev.driver; +} + +extern void early_platform_driver_register_all(char *class_str); +extern int early_platform_driver_probe(char *class_str, + int nr_probe, int user_only); +extern void early_platform_cleanup(void); + + +#ifndef MODULE +#define early_platform_init(class_string, platform_driver) \ +static __initdata struct early_platform_driver early_driver = { \ + .class_str = class_string, \ + .pdrv = platform_driver, \ + .requested_id = EARLY_PLATFORM_ID_UNSET, \ +}; \ +static int __init early_platform_driver_setup_func(char *buf) \ +{ \ + return early_platform_driver_register(&early_driver, buf); \ +} \ +early_param(class_string, early_platform_driver_setup_func) +#else /* MODULE */ +#define early_platform_init(class_string, platform_driver) +#endif /* MODULE */ + #endif /* _PLATFORM_DEVICE_H_ */ -- cgit v1.1 From 4ccb457966391295bd9b3644f6bdc9ddd97b6051 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Thu, 9 Apr 2009 14:48:24 -0700 Subject: dynamic debug: resurrect old pr_debug() semantics as pr_devel() pr_debug() used to produce zero code unless DEBUG was #defined. This is now no longer the case in practice[1]. There are places where it's useful to have debugging printks, but we don't want them to generate any code in production kernels. So add a new macro, pr_devel(), for _devel_opment, to provide the old semantics, ie. if the programmer doesn't explicitly enable debugging, no code is produced. [1]: You can turn CONFIG_DYNAMIC_DEBUG off, but it's enabled in at least one distro kernel, so it's not really a solution. Signed-off-by: Michael Ellerman Cc: Jason Baron Cc: Greg Banks Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- include/linux/kernel.h | 9 +++++++++ 1 file changed, 9 insertions(+) (limited to 'include/linux') diff --git a/include/linux/kernel.h b/include/linux/kernel.h index d9e75ec..883cd44 100644 --- a/include/linux/kernel.h +++ b/include/linux/kernel.h @@ -377,6 +377,15 @@ static inline char *pack_hex_byte(char *buf, u8 byte) #define pr_cont(fmt, ...) \ printk(KERN_CONT fmt, ##__VA_ARGS__) +/* pr_devel() should produce zero code unless DEBUG is defined */ +#ifdef DEBUG +#define pr_devel(fmt, ...) \ + printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__) +#else +#define pr_devel(fmt, ...) \ + ({ if (0) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); 0; }) +#endif + /* If you are writing a driver, please use dev_dbg instead */ #if defined(DEBUG) #define pr_debug(fmt, ...) \ -- cgit v1.1 From 7607b1d673469d5b5dce4c9b6779d165e03c8ff5 Mon Sep 17 00:00:00 2001 From: Jason Baron Date: Wed, 8 Apr 2009 12:12:52 -0400 Subject: Driver core: remove pr_fmt() from dynamic_dev_dbg() printk When pr_fmt() was added to the pr_debug() code, we added it not only to the dynamic_pr_debug() function, but also to the dynamic_dev_dbg() funciton. However, dev_dbg() doesn't make use of pr_fmt(), so neither should dynamic_dev_dbg(). Signed-off-by: Jason Baron Signed-off-by: Greg Kroah-Hartman --- include/linux/dynamic_debug.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/dynamic_debug.h b/include/linux/dynamic_debug.h index baabf33..a0d9422 100644 --- a/include/linux/dynamic_debug.h +++ b/include/linux/dynamic_debug.h @@ -70,7 +70,7 @@ extern int ddebug_remove_module(char *mod_name); DEBUG_HASH2, __LINE__, _DPRINTK_FLAGS_DEFAULT }; \ if (__dynamic_dbg_enabled(descriptor)) \ dev_printk(KERN_DEBUG, dev, \ - KBUILD_MODNAME ": " pr_fmt(fmt),\ + KBUILD_MODNAME ": " fmt, \ ##__VA_ARGS__); \ } while (0) -- cgit v1.1 From 3444b26afa145148951112534f298bdc554ec789 Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Wed, 8 Apr 2009 17:36:28 +0000 Subject: USB: add reset endpoint operations Wireless USB endpoint state has a sequence number and a current window and not just a single toggle bit. So allow HCDs to provide a endpoint_reset method and call this or clear the software toggles as required (after a clear halt, set configuration etc.). usb_settoggle() and friends are then HCD internal and are moved into core/hcd.h and all device drivers call usb_reset_endpoint() instead. If the device endpoint state has been reset (with a clear halt) but the host endpoint state has not then subsequent data transfers will not complete. The device will only work again after it is reset or disconnected. Signed-off-by: David Vrabel Signed-off-by: Greg Kroah-Hartman --- include/linux/usb.h | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) (limited to 'include/linux') diff --git a/include/linux/usb.h b/include/linux/usb.h index c6b2ab4..3aa2cd1 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -1387,6 +1387,7 @@ extern int usb_string(struct usb_device *dev, int index, extern int usb_clear_halt(struct usb_device *dev, int pipe); extern int usb_reset_configuration(struct usb_device *dev); extern int usb_set_interface(struct usb_device *dev, int ifnum, int alternate); +extern void usb_reset_endpoint(struct usb_device *dev, unsigned int epaddr); /* this request isn't really synchronous, but it belongs with the others */ extern int usb_driver_set_configuration(struct usb_device *udev, int config); @@ -1491,14 +1492,6 @@ void usb_sg_wait(struct usb_sg_request *io); #define usb_pipecontrol(pipe) (usb_pipetype((pipe)) == PIPE_CONTROL) #define usb_pipebulk(pipe) (usb_pipetype((pipe)) == PIPE_BULK) -/* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */ -#define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1) -#define usb_dotoggle(dev, ep, out) ((dev)->toggle[out] ^= (1 << (ep))) -#define usb_settoggle(dev, ep, out, bit) \ - ((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << (ep))) | \ - ((bit) << (ep))) - - static inline unsigned int __create_pipe(struct usb_device *dev, unsigned int endpoint) { -- cgit v1.1 From 42a17ad2762f465d291c3bc0b6ed2b3738f65481 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sat, 18 Apr 2009 11:30:56 +0200 Subject: needs to include . uses EINVAL so should include . This fixes a build error on 64-bit MIPS if CONFIG_SECCOMP is disabled. Signed-off-by: Ralf Baechle Signed-off-by: Linus Torvalds --- include/linux/seccomp.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/seccomp.h b/include/linux/seccomp.h index 262a8dc..167c333 100644 --- a/include/linux/seccomp.h +++ b/include/linux/seccomp.h @@ -21,6 +21,8 @@ extern long prctl_set_seccomp(unsigned long); #else /* CONFIG_SECCOMP */ +#include + typedef struct { } seccomp_t; #define secure_computing(x) do { } while (0) -- cgit v1.1 From 6a7c7eaf71b636f197d73b381a2ab729ebdcfb2e Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Sun, 19 Apr 2009 20:08:42 +0200 Subject: PM/Suspend: Introduce two new platform callbacks to avoid breakage Commit 900af0d973856d6feb6fc088c2d0d3fde57707d3 (PM: Change suspend code ordering) changed the ordering of suspend code in such a way that the platform .prepare() callback is now executed after the device drivers' late suspend callbacks have run. Unfortunately, this turns out to break ARM platforms that need to talk via I2C to power control devices during the .prepare() callback. For this reason introduce two new platform suspend callbacks, .prepare_late() and .wake(), that will be called just prior to disabling non-boot CPUs and right after bringing them back on line, respectively, and use them instead of .prepare() and .finish() for ACPI suspend. Make the PM core execute the .prepare() and .finish() platform suspend callbacks where they were executed previously (that is, right after calling the regular suspend methods provided by device drivers and right before executing their regular resume methods, respectively). It is not necessary to make analogous changes to the hibernation code and data structures at the moment, because they are only used by ACPI platforms. Signed-off-by: Rafael J. Wysocki Reported-by: Russell King Acked-by: Len Brown --- include/linux/suspend.h | 36 ++++++++++++++++++++++++++---------- 1 file changed, 26 insertions(+), 10 deletions(-) (limited to 'include/linux') diff --git a/include/linux/suspend.h b/include/linux/suspend.h index 3e3a436..795032e 100644 --- a/include/linux/suspend.h +++ b/include/linux/suspend.h @@ -58,10 +58,17 @@ typedef int __bitwise suspend_state_t; * by @begin(). * @prepare() is called right after devices have been suspended (ie. the * appropriate .suspend() method has been executed for each device) and - * before the nonboot CPUs are disabled (it is executed with IRQs enabled). - * This callback is optional. It returns 0 on success or a negative - * error code otherwise, in which case the system cannot enter the desired - * sleep state (@enter() and @finish() will not be called in that case). + * before device drivers' late suspend callbacks are executed. It returns + * 0 on success or a negative error code otherwise, in which case the + * system cannot enter the desired sleep state (@prepare_late(), @enter(), + * @wake(), and @finish() will not be called in that case). + * + * @prepare_late: Finish preparing the platform for entering the system sleep + * state indicated by @begin(). + * @prepare_late is called before disabling nonboot CPUs and after + * device drivers' late suspend callbacks have been executed. It returns + * 0 on success or a negative error code otherwise, in which case the + * system cannot enter the desired sleep state (@enter() and @wake()). * * @enter: Enter the system sleep state indicated by @begin() or represented by * the argument if @begin() is not implemented. @@ -69,19 +76,26 @@ typedef int __bitwise suspend_state_t; * error code otherwise, in which case the system cannot enter the desired * sleep state. * - * @finish: Called when the system has just left a sleep state, right after - * the nonboot CPUs have been enabled and before devices are resumed (it is - * executed with IRQs enabled). + * @wake: Called when the system has just left a sleep state, right after + * the nonboot CPUs have been enabled and before device drivers' early + * resume callbacks are executed. + * This callback is optional, but should be implemented by the platforms + * that implement @prepare_late(). If implemented, it is always called + * after @enter(), even if @enter() fails. + * + * @finish: Finish wake-up of the platform. + * @finish is called right prior to calling device drivers' regular suspend + * callbacks. * This callback is optional, but should be implemented by the platforms * that implement @prepare(). If implemented, it is always called after - * @enter() (even if @enter() fails). + * @enter() and @wake(), if implemented, even if any of them fails. * * @end: Called by the PM core right after resuming devices, to indicate to * the platform that the system has returned to the working state or * the transition to the sleep state has been aborted. * This callback is optional, but should be implemented by the platforms - * that implement @begin(), but platforms implementing @begin() should - * also provide a @end() which cleans up transitions aborted before + * that implement @begin(). Accordingly, platforms implementing @begin() + * should also provide a @end() which cleans up transitions aborted before * @enter(). * * @recover: Recover the platform from a suspend failure. @@ -93,7 +107,9 @@ struct platform_suspend_ops { int (*valid)(suspend_state_t state); int (*begin)(suspend_state_t state); int (*prepare)(void); + int (*prepare_late)(void); int (*enter)(suspend_state_t state); + void (*wake)(void); void (*finish)(void); void (*end)(void); void (*recover)(void); -- cgit v1.1 From 0112fc2229847feb6c4eb011e6833d8f1742a375 Mon Sep 17 00:00:00 2001 From: Oleg Drokin Date: Wed, 8 Apr 2009 20:05:42 +0400 Subject: Separate out common fstatat code into vfs_fstatat This is a version incorporating Christoph's suggestion. Separate out common *fstatat functionality into a single function instead of duplicating it all over the code. Signed-off-by: Oleg Drokin Signed-off-by: Al Viro --- include/linux/fs.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index e766be0..257f4d3 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2302,6 +2302,7 @@ extern int vfs_lstat(char __user *, struct kstat *); extern int vfs_stat_fd(int dfd, char __user *, struct kstat *); extern int vfs_lstat_fd(int dfd, char __user *, struct kstat *); extern int vfs_fstat(unsigned int, struct kstat *); +extern int vfs_fstatat(int , char __user *, struct kstat *, int); extern int do_vfs_ioctl(struct file *filp, unsigned int fd, unsigned int cmd, unsigned long arg); -- cgit v1.1 From 2eae7a1874ca5be3232765d89e0250a449f1bc90 Mon Sep 17 00:00:00 2001 From: Christoph Hellwig Date: Wed, 8 Apr 2009 16:34:03 -0400 Subject: kill vfs_stat_fd / vfs_lstat_fd There's really no reason to keep vfs_stat_fd and vfs_lstat_fd with Oleg's vfs_fstatat. Use vfs_fstatat for the few cases having the directory fd, and switch all others to vfs_stat / vfs_lstat. Reviewed-by: Christoph Hellwig Signed-off-by: Al Viro --- include/linux/fs.h | 2 -- 1 file changed, 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index 257f4d3..8f42b35 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2299,8 +2299,6 @@ extern int vfs_readdir(struct file *, filldir_t, void *); extern int vfs_stat(char __user *, struct kstat *); extern int vfs_lstat(char __user *, struct kstat *); -extern int vfs_stat_fd(int dfd, char __user *, struct kstat *); -extern int vfs_lstat_fd(int dfd, char __user *, struct kstat *); extern int vfs_fstat(unsigned int, struct kstat *); extern int vfs_fstatat(int , char __user *, struct kstat *, int); -- cgit v1.1 From 38e23c95f92a84fb8505a9f572b8a209c9c372c1 Mon Sep 17 00:00:00 2001 From: Tetsuo Handa Date: Thu, 9 Apr 2009 20:17:52 +0900 Subject: fs: Mark get_filesystem_list() as __init function. "int get_filesystem_list(char * buf)" is called by only "static void __init get_fs_names(char *page)". We can mark get_filesystem_list() as "__init". Signed-off-by: Tetsuo Handa Signed-off-by: Al Viro --- include/linux/fs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/fs.h b/include/linux/fs.h index 8f42b35..5bed436 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -2448,7 +2448,7 @@ struct ctl_table; int proc_nr_files(struct ctl_table *table, int write, struct file *filp, void __user *buffer, size_t *lenp, loff_t *ppos); -int get_filesystem_list(char * buf); +int __init get_filesystem_list(char *buf); #endif /* __KERNEL__ */ #endif /* _LINUX_FS_H */ -- cgit v1.1 From be9208dff23af904655807672dd8235abf6ac039 Mon Sep 17 00:00:00 2001 From: Al Viro Date: Mon, 20 Apr 2009 23:29:41 -0400 Subject: reiserfs: fix j_last_flush_trans_id type Conversion in commit 600ed41675d8c384519d8f0b3c76afed39ef2f4b had missed that one, but converted format from %lu to %u. As the result, /proc/..../journal got buggered on 64bit boxen. Signed-off-by: Al Viro --- include/linux/reiserfs_fs_sb.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/reiserfs_fs_sb.h b/include/linux/reiserfs_fs_sb.h index 5621d87..6b361d2 100644 --- a/include/linux/reiserfs_fs_sb.h +++ b/include/linux/reiserfs_fs_sb.h @@ -193,7 +193,7 @@ struct reiserfs_journal { atomic_t j_wcount; /* count of writers for current commit */ unsigned long j_bcount; /* batch count. allows turning X transactions into 1 */ unsigned long j_first_unflushed_offset; /* first unflushed transactions offset */ - unsigned long j_last_flush_trans_id; /* last fully flushed journal timestamp */ + unsigned j_last_flush_trans_id; /* last fully flushed journal timestamp */ struct buffer_head *j_header_bh; time_t j_trans_start_time; /* time this transaction started */ -- cgit v1.1 From 88bea188b85f9cefefbbd56b8a48d0f798409177 Mon Sep 17 00:00:00 2001 From: Len Brown Date: Tue, 21 Apr 2009 00:35:47 -0400 Subject: ACPI: add /sys/firmware/acpi/interrupts/sci_not counter This counter may prove useful in debugging some spurious interrupt issues seen in the field. Signed-off-by: Len Brown --- include/linux/acpi.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/acpi.h b/include/linux/acpi.h index 6586cbd..88be890 100644 --- a/include/linux/acpi.h +++ b/include/linux/acpi.h @@ -111,6 +111,7 @@ int acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base); int acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base); void acpi_irq_stats_init(void); extern u32 acpi_irq_handled; +extern u32 acpi_irq_not_handled; extern struct acpi_mcfg_allocation *pci_mmcfg_config; extern int pci_mmcfg_config_num; -- cgit v1.1 From 8b9cf76d0fa6cd98fe42dd2f86460d6ede55fed8 Mon Sep 17 00:00:00 2001 From: Thomas Bogendoerfer Date: Tue, 21 Apr 2009 13:44:13 +0200 Subject: Fix SYSCALL_ALIAS for older MIPS assembler Older MIPS assembler don't support .set for defining aliases. Using = works for old and new assembers. Signed-off-by: Thomas Bogendoerfer Acked-by: Ralf Baechle Signed-off-by: Linus Torvalds --- include/linux/syscalls.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h index dabe4ad..40617c1 100644 --- a/include/linux/syscalls.h +++ b/include/linux/syscalls.h @@ -148,7 +148,7 @@ struct old_linux_dirent; asm ("\t.globl " #alias "\n\t.set " #alias ", " #name "\n" \ "\t.globl ." #alias "\n\t.set ." #alias ", ." #name) #else -#ifdef CONFIG_ALPHA +#if defined(CONFIG_ALPHA) || defined(CONFIG_MIPS) #define SYSCALL_ALIAS(alias, name) \ asm ( #alias " = " #name "\n\t.globl " #alias) #else -- cgit v1.1 From 8e19608e8b5c001e4a66ce482edc474f05fb7355 Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 21 Apr 2009 12:24:00 -0700 Subject: clocksource: pass clocksource to read() callback Pass clocksource pointer to the read() callback for clocksources. This allows us to share the callback between multiple instances. [hugh@veritas.com: fix powerpc build of clocksource pass clocksource mods] [akpm@linux-foundation.org: cleanup] Signed-off-by: Magnus Damm Acked-by: John Stultz Cc: Thomas Gleixner Signed-off-by: Hugh Dickins Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/clocksource.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h index 573819ef..0d96cde 100644 --- a/include/linux/clocksource.h +++ b/include/linux/clocksource.h @@ -143,7 +143,7 @@ extern u64 timecounter_cyc2time(struct timecounter *tc, * 400-499: Perfect * The ideal clocksource. A must-use where * available. - * @read: returns a cycle value + * @read: returns a cycle value, passes clocksource as argument * @mask: bitmask for two's complement * subtraction of non 64 bit counters * @mult: cycle to nanosecond multiplier (adjusted by NTP) @@ -162,7 +162,7 @@ struct clocksource { char *name; struct list_head list; int rating; - cycle_t (*read)(void); + cycle_t (*read)(struct clocksource *cs); cycle_t mask; u32 mult; u32 mult_orig; @@ -271,7 +271,7 @@ static inline u32 clocksource_hz2mult(u32 hz, u32 shift_constant) */ static inline cycle_t clocksource_read(struct clocksource *cs) { - return cs->read(); + return cs->read(cs); } /** -- cgit v1.1 From 4614e6adafa2c5e6c3a9c245af2807fa7bc5117a Mon Sep 17 00:00:00 2001 From: Magnus Damm Date: Tue, 21 Apr 2009 12:24:02 -0700 Subject: clocksource: add enable() and disable() callbacks Add enable() and disable() callbacks for clocksources. This allows us to put unused clocksources in power save mode. The functions clocksource_enable() and clocksource_disable() wrap the callbacks and are inserted in the timekeeping code to enable before use and disable after switching to a new clocksource. Signed-off-by: Magnus Damm Acked-by: John Stultz Cc: Thomas Gleixner Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/clocksource.h | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+) (limited to 'include/linux') diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h index 0d96cde..5a40d14 100644 --- a/include/linux/clocksource.h +++ b/include/linux/clocksource.h @@ -144,6 +144,8 @@ extern u64 timecounter_cyc2time(struct timecounter *tc, * The ideal clocksource. A must-use where * available. * @read: returns a cycle value, passes clocksource as argument + * @enable: optional function to enable the clocksource + * @disable: optional function to disable the clocksource * @mask: bitmask for two's complement * subtraction of non 64 bit counters * @mult: cycle to nanosecond multiplier (adjusted by NTP) @@ -163,6 +165,8 @@ struct clocksource { struct list_head list; int rating; cycle_t (*read)(struct clocksource *cs); + int (*enable)(struct clocksource *cs); + void (*disable)(struct clocksource *cs); cycle_t mask; u32 mult; u32 mult_orig; @@ -275,6 +279,33 @@ static inline cycle_t clocksource_read(struct clocksource *cs) } /** + * clocksource_enable: - enable clocksource + * @cs: pointer to clocksource + * + * Enables the specified clocksource. The clocksource callback + * function should start up the hardware and setup mult and field + * members of struct clocksource to reflect hardware capabilities. + */ +static inline int clocksource_enable(struct clocksource *cs) +{ + return cs->enable ? cs->enable(cs) : 0; +} + +/** + * clocksource_disable: - disable clocksource + * @cs: pointer to clocksource + * + * Disables the specified clocksource. The clocksource callback + * function should power down the now unused hardware block to + * save power. + */ +static inline void clocksource_disable(struct clocksource *cs) +{ + if (cs->disable) + cs->disable(cs); +} + +/** * cyc2ns - converts clocksource cycles to nanoseconds * @cs: Pointer to clocksource * @cycles: Cycles -- cgit v1.1 From 40112ae7504745799e75ef418057f0d2cb745050 Mon Sep 17 00:00:00 2001 From: Corey Minyard Date: Tue, 21 Apr 2009 12:24:03 -0700 Subject: ipmi: test for event buffer before using The IPMI driver would attempt to use the event buffer even if that didn't exist on the BMC. This patch modified the IPMI driver to check for the event buffer's existence before trying to use it. Signed-off-by: Corey Minyard Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/ipmi_msgdefs.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ipmi_msgdefs.h b/include/linux/ipmi_msgdefs.h index b56a158..a079f58 100644 --- a/include/linux/ipmi_msgdefs.h +++ b/include/linux/ipmi_msgdefs.h @@ -58,6 +58,12 @@ #define IPMI_READ_EVENT_MSG_BUFFER_CMD 0x35 #define IPMI_GET_CHANNEL_INFO_CMD 0x42 +/* Bit for BMC global enables. */ +#define IPMI_BMC_RCV_MSG_INTR 0x01 +#define IPMI_BMC_EVT_MSG_INTR 0x02 +#define IPMI_BMC_EVT_MSG_BUFF 0x04 +#define IPMI_BMC_SYS_LOG 0x08 + #define IPMI_NETFN_STORAGE_REQUEST 0x0a #define IPMI_NETFN_STORAGE_RESPONSE 0x0b #define IPMI_ADD_SEL_ENTRY_CMD 0x44 -- cgit v1.1 From 4dec302ff71ebf48f5784a2d2fc5e3745e6d4d52 Mon Sep 17 00:00:00 2001 From: dann frazier Date: Tue, 21 Apr 2009 12:24:05 -0700 Subject: ipmi: add oem message handling Enable userspace to receive messages that a BMC transmits using an OEM medium. This is used by the HP iLO2. Based on code originally written by Patrick Schoeller. Signed-off-by: dann frazier Signed-off-by: Corey Minyard Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/ipmi.h | 2 ++ include/linux/ipmi_msgdefs.h | 2 ++ 2 files changed, 4 insertions(+) (limited to 'include/linux') diff --git a/include/linux/ipmi.h b/include/linux/ipmi.h index 7ebdb4f..65aae34 100644 --- a/include/linux/ipmi.h +++ b/include/linux/ipmi.h @@ -198,6 +198,8 @@ struct kernel_ipmi_msg { response. When you send a response message, this will be returned. */ +#define IPMI_OEM_RECV_TYPE 5 /* The response for OEM Channels */ + /* Note that async events and received commands do not have a completion code as the first byte of the incoming data, unlike a response. */ diff --git a/include/linux/ipmi_msgdefs.h b/include/linux/ipmi_msgdefs.h index a079f58..df97e6e 100644 --- a/include/linux/ipmi_msgdefs.h +++ b/include/linux/ipmi_msgdefs.h @@ -115,5 +115,7 @@ #define IPMI_CHANNEL_MEDIUM_USB1 10 #define IPMI_CHANNEL_MEDIUM_USB2 11 #define IPMI_CHANNEL_MEDIUM_SYSINTF 12 +#define IPMI_CHANNEL_MEDIUM_OEM_MIN 0x60 +#define IPMI_CHANNEL_MEDIUM_OEM_MAX 0x7f #endif /* __LINUX_IPMI_MSGDEFS_H */ -- cgit v1.1 From e638c1394010859a015a3b533ee452d768e62cea Mon Sep 17 00:00:00 2001 From: KAMEZAWA Hiroyuki Date: Tue, 21 Apr 2009 12:24:41 -0700 Subject: memcg: use rcu_dereference to access mm->owner mm->owner should be accessed with rcu_dereference(). Reported-by: KOSAKI Motohiro Signed-off-by: KAMEZAWA Hiroyuki Acked-by: Balbir Singh Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/memcontrol.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h index 18146c9..a9e3b76 100644 --- a/include/linux/memcontrol.h +++ b/include/linux/memcontrol.h @@ -75,7 +75,7 @@ int mm_match_cgroup(const struct mm_struct *mm, const struct mem_cgroup *cgroup) { struct mem_cgroup *mem; rcu_read_lock(); - mem = mem_cgroup_from_task((mm)->owner); + mem = mem_cgroup_from_task(rcu_dereference((mm)->owner)); rcu_read_unlock(); return cgroup == mem; } -- cgit v1.1 From 6e538aaf50ae782a890cbc02c27950448d8193e1 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 21 Apr 2009 12:24:49 -0700 Subject: spi: documentation: emphasise spi_master.setup() semantics This is a doc-only patch which I hope will reduce the number of spi_master controller driver patches starting out with a common implementation bug. (As in: almost every spi_master driver I see starts out with its version of this bug. Sigh.) It just re-emphasizes that the setup() method may be called for one device while a transfer is active on another ... which means that most driver implementations shouldn't touch any registers. Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/spi/spi.h | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index 2cc43fa..a0faa18 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -245,7 +245,12 @@ struct spi_master { */ u16 dma_alignment; - /* setup mode and clock, etc (spi driver may call many times) */ + /* Setup mode and clock, etc (spi driver may call many times). + * + * IMPORTANT: this may be called when transfers to another + * device are active. DO NOT UPDATE SHARED REGISTERS in ways + * which could break those transfers. + */ int (*setup)(struct spi_device *spi); /* bidirectional bulk transfers -- cgit v1.1 From 9b8de7479d0dbab1ed98b5b015d44232c9d3d08e Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 21 Apr 2009 23:00:24 +0100 Subject: FRV: Fix the section attribute on UP DECLARE_PER_CPU() In non-SMP mode, the variable section attribute specified by DECLARE_PER_CPU() does not agree with that specified by DEFINE_PER_CPU(). This means that architectures that have a small data section references relative to a base register may throw up linkage errors due to too great a displacement between where the base register points and the per-CPU variable. On FRV, the .h declaration says that the variable is in the .sdata section, but the .c definition says it's actually in the .data section. The linker throws up the following errors: kernel/built-in.o: In function `release_task': kernel/exit.c:78: relocation truncated to fit: R_FRV_GPREL12 against symbol `per_cpu__process_counts' defined in .data section in kernel/built-in.o kernel/exit.c:78: relocation truncated to fit: R_FRV_GPREL12 against symbol `per_cpu__process_counts' defined in .data section in kernel/built-in.o To fix this, DECLARE_PER_CPU() should simply apply the same section attribute as does DEFINE_PER_CPU(). However, this is made slightly more complex by virtue of the fact that there are several variants on DEFINE, so these need to be matched by variants on DECLARE. Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- include/linux/percpu.h | 24 ------------------------ 1 file changed, 24 deletions(-) (limited to 'include/linux') diff --git a/include/linux/percpu.h b/include/linux/percpu.h index cfda2d5..f052d81 100644 --- a/include/linux/percpu.h +++ b/include/linux/percpu.h @@ -9,30 +9,6 @@ #include -#ifndef PER_CPU_BASE_SECTION -#ifdef CONFIG_SMP -#define PER_CPU_BASE_SECTION ".data.percpu" -#else -#define PER_CPU_BASE_SECTION ".data" -#endif -#endif - -#ifdef CONFIG_SMP - -#ifdef MODULE -#define PER_CPU_SHARED_ALIGNED_SECTION "" -#else -#define PER_CPU_SHARED_ALIGNED_SECTION ".shared_aligned" -#endif -#define PER_CPU_FIRST_SECTION ".first" - -#else - -#define PER_CPU_SHARED_ALIGNED_SECTION "" -#define PER_CPU_FIRST_SECTION "" - -#endif - #define DEFINE_PER_CPU_SECTION(type, name, section) \ __attribute__((__section__(PER_CPU_BASE_SECTION section))) \ PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name -- cgit v1.1 From 5028eaa97dd1dab9cd7c30c4d38f71c708ca64bc Mon Sep 17 00:00:00 2001 From: David Howells Date: Tue, 21 Apr 2009 23:00:29 +0100 Subject: PERCPU: Collect the DECLARE/DEFINE declarations together Collect the DECLARE/DEFINE declarations together in linux/percpu-defs.h so that they're in one place, and give them descriptive comments, particularly the SHARED_ALIGNED variant. It would be nice to collect these in linux/percpu.h, but that's not possible without sorting out the severe #include recursion between the x86 arch headers and the general headers (and possibly other arches too). Signed-off-by: David Howells Signed-off-by: Linus Torvalds --- include/linux/percpu-defs.h | 84 +++++++++++++++++++++++++++++++++++++++++++++ include/linux/percpu.h | 20 ----------- 2 files changed, 84 insertions(+), 20 deletions(-) create mode 100644 include/linux/percpu-defs.h (limited to 'include/linux') diff --git a/include/linux/percpu-defs.h b/include/linux/percpu-defs.h new file mode 100644 index 0000000..8f921d7 --- /dev/null +++ b/include/linux/percpu-defs.h @@ -0,0 +1,84 @@ +#ifndef _LINUX_PERCPU_DEFS_H +#define _LINUX_PERCPU_DEFS_H + +/* + * Determine the real variable name from the name visible in the + * kernel sources. + */ +#define per_cpu_var(var) per_cpu__##var + +/* + * Base implementations of per-CPU variable declarations and definitions, where + * the section in which the variable is to be placed is provided by the + * 'section' argument. This may be used to affect the parameters governing the + * variable's storage. + * + * NOTE! The sections for the DECLARE and for the DEFINE must match, lest + * linkage errors occur due the compiler generating the wrong code to access + * that section. + */ +#define DECLARE_PER_CPU_SECTION(type, name, section) \ + extern \ + __attribute__((__section__(PER_CPU_BASE_SECTION section))) \ + PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name + +#define DEFINE_PER_CPU_SECTION(type, name, section) \ + __attribute__((__section__(PER_CPU_BASE_SECTION section))) \ + PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name + +/* + * Variant on the per-CPU variable declaration/definition theme used for + * ordinary per-CPU variables. + */ +#define DECLARE_PER_CPU(type, name) \ + DECLARE_PER_CPU_SECTION(type, name, "") + +#define DEFINE_PER_CPU(type, name) \ + DEFINE_PER_CPU_SECTION(type, name, "") + +/* + * Declaration/definition used for per-CPU variables that must come first in + * the set of variables. + */ +#define DECLARE_PER_CPU_FIRST(type, name) \ + DECLARE_PER_CPU_SECTION(type, name, PER_CPU_FIRST_SECTION) + +#define DEFINE_PER_CPU_FIRST(type, name) \ + DEFINE_PER_CPU_SECTION(type, name, PER_CPU_FIRST_SECTION) + +/* + * Declaration/definition used for per-CPU variables that must be cacheline + * aligned under SMP conditions so that, whilst a particular instance of the + * data corresponds to a particular CPU, inefficiencies due to direct access by + * other CPUs are reduced by preventing the data from unnecessarily spanning + * cachelines. + * + * An example of this would be statistical data, where each CPU's set of data + * is updated by that CPU alone, but the data from across all CPUs is collated + * by a CPU processing a read from a proc file. + */ +#define DECLARE_PER_CPU_SHARED_ALIGNED(type, name) \ + DECLARE_PER_CPU_SECTION(type, name, PER_CPU_SHARED_ALIGNED_SECTION) \ + ____cacheline_aligned_in_smp + +#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name) \ + DEFINE_PER_CPU_SECTION(type, name, PER_CPU_SHARED_ALIGNED_SECTION) \ + ____cacheline_aligned_in_smp + +/* + * Declaration/definition used for per-CPU variables that must be page aligned. + */ +#define DECLARE_PER_CPU_PAGE_ALIGNED(type, name) \ + DECLARE_PER_CPU_SECTION(type, name, ".page_aligned") + +#define DEFINE_PER_CPU_PAGE_ALIGNED(type, name) \ + DEFINE_PER_CPU_SECTION(type, name, ".page_aligned") + +/* + * Intermodule exports for per-CPU variables. + */ +#define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var) +#define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var) + + +#endif /* _LINUX_PERCPU_DEFS_H */ diff --git a/include/linux/percpu.h b/include/linux/percpu.h index f052d81..1581ff2 100644 --- a/include/linux/percpu.h +++ b/include/linux/percpu.h @@ -9,26 +9,6 @@ #include -#define DEFINE_PER_CPU_SECTION(type, name, section) \ - __attribute__((__section__(PER_CPU_BASE_SECTION section))) \ - PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name - -#define DEFINE_PER_CPU(type, name) \ - DEFINE_PER_CPU_SECTION(type, name, "") - -#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name) \ - DEFINE_PER_CPU_SECTION(type, name, PER_CPU_SHARED_ALIGNED_SECTION) \ - ____cacheline_aligned_in_smp - -#define DEFINE_PER_CPU_PAGE_ALIGNED(type, name) \ - DEFINE_PER_CPU_SECTION(type, name, ".page_aligned") - -#define DEFINE_PER_CPU_FIRST(type, name) \ - DEFINE_PER_CPU_SECTION(type, name, PER_CPU_FIRST_SECTION) - -#define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var) -#define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var) - /* enough to cover all DEFINE_PER_CPUs in modules */ #ifdef CONFIG_MODULES #define PERCPU_MODULE_RESERVE (8 << 10) -- cgit v1.1 From 5dd559f020c98a2a4b3e063f09c0e4bc771ed838 Mon Sep 17 00:00:00 2001 From: Jonathan Corbet Date: Tue, 21 Apr 2009 16:30:32 -0600 Subject: Trivial: fix a typo in slow-work.h Fix a comment typo in slow-work.h ...a trivial mistake, but it will mess up kerneldoc if nothing else. Signed-off-by: Jonathan Corbet Signed-off-by: Linus Torvalds --- include/linux/slow-work.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/slow-work.h b/include/linux/slow-work.h index 8595827..b65c888 100644 --- a/include/linux/slow-work.h +++ b/include/linux/slow-work.h @@ -67,7 +67,7 @@ static inline void slow_work_init(struct slow_work *work, } /** - * slow_work_init - Initialise a very slow work item + * vslow_work_init - Initialise a very slow work item * @work: The work item to initialise * @ops: The operations to use to handle the slow work item * -- cgit v1.1 From d4d5291c8cd499b1b590336059d5cc3e24c1ced6 Mon Sep 17 00:00:00 2001 From: Arjan van de Ven Date: Tue, 21 Apr 2009 13:32:54 -0700 Subject: driver synchronization: make scsi_wait_scan more advanced There is currently only one way for userspace to say "wait for my storage device to get ready for the modules I just loaded": to load the scsi_wait_scan module. Expectations of userspace are that once this module is loaded, all the (storage) devices for which the drivers were loaded before the module load are present. Now, there are some issues with the implementation, and the async stuff got caught in the middle of this: The existing code only waits for the scsy async probing to finish, but it did not take into account at all that probing might not have begun yet. (Russell ran into this problem on his computer and the fix works for him) This patch fixes this more thoroughly than the previous "fix", which had some bad side effects (namely, for kernel code that wanted to wait for the scsi scan it would also do an async sync, which would deadlock if you did it from async context already.. there's a report about that on lkml): The patch makes the module first wait for all device driver probes, and then it will wait for the scsi parallel scan to finish. Signed-off-by: Arjan van de Ven Tested-by: Russell King Signed-off-by: Linus Torvalds --- include/linux/device.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/device.h b/include/linux/device.h index 2918c0e..6a69caa 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -551,6 +551,7 @@ extern int (*platform_notify_remove)(struct device *dev); extern struct device *get_device(struct device *dev); extern void put_device(struct device *dev); +extern void wait_for_device_probe(void); /* drivers/base/power/shutdown.c */ extern void device_shutdown(void); -- cgit v1.1 From 451a9ebf653d28337ba53ed5b4b70b0b9543cca1 Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Wed, 15 Apr 2009 19:50:51 +0200 Subject: bio: fix bio_kmalloc() Impact: fix bio_kmalloc() and its destruction path bio_kmalloc() was broken in two ways. * bvec_alloc_bs() first allocates bvec using kmalloc() and then ignores it and allocates again like non-kmalloc bvecs. * bio_kmalloc_destructor() didn't check for and free bio integrity data. This patch fixes the above problems. kmalloc patch is separated out from bio_alloc_bioset() and allocates the requested number of bvecs as inline bvecs. * bio_alloc_bioset() no longer takes NULL @bs. None other than bio_kmalloc() used it and outside users can't know how it was allocated anyway. * Define and use BIO_POOL_NONE so that pool index check in bvec_free_bs() triggers if inline or kmalloc allocated bvec gets there. * Relocate destructors on top of each allocation function so that how they're used is more clear. Jens Axboe suggested allocating bvecs inline. Signed-off-by: Tejun Heo Signed-off-by: Jens Axboe --- include/linux/bio.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/bio.h b/include/linux/bio.h index b89cf2d..7b214fd 100644 --- a/include/linux/bio.h +++ b/include/linux/bio.h @@ -132,6 +132,7 @@ struct bio { * top 4 bits of bio flags indicate the pool this bio came from */ #define BIO_POOL_BITS (4) +#define BIO_POOL_NONE ((1UL << BIO_POOL_BITS) - 1) #define BIO_POOL_OFFSET (BITS_PER_LONG - BIO_POOL_BITS) #define BIO_POOL_MASK (1UL << BIO_POOL_OFFSET) #define BIO_POOL_IDX(bio) ((bio)->bi_flags >> BIO_POOL_OFFSET) -- cgit v1.1 From 71982a409f12c50d011325a4471aa20666bb908d Mon Sep 17 00:00:00 2001 From: Tejun Heo Date: Fri, 17 Apr 2009 08:34:48 +0200 Subject: block: include empty disks in /proc/diskstats /proc/diskstats used to show stats for all disks whether they're zero-sized or not and their non-zero partitions. Commit 074a7aca7afa6f230104e8e65eba3420263714a5 accidentally changed the behavior such that it doesn't print out zero sized disks. This patch implements DISK_PITER_INCL_EMPTY_PART0 flag to partition iterator and uses it in diskstats_show() such that empty part0 is shown in /proc/diskstats. Reported and bisectd by Dianel Collins. Signed-off-by: Tejun Heo Reported-by: Daniel Collins Signed-off-by: Jens Axboe --- include/linux/genhd.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/genhd.h b/include/linux/genhd.h index 634c530..a1a28ca 100644 --- a/include/linux/genhd.h +++ b/include/linux/genhd.h @@ -214,6 +214,7 @@ static inline void disk_put_part(struct hd_struct *part) #define DISK_PITER_REVERSE (1 << 0) /* iterate in the reverse direction */ #define DISK_PITER_INCL_EMPTY (1 << 1) /* include 0-sized parts */ #define DISK_PITER_INCL_PART0 (1 << 2) /* include partition 0 */ +#define DISK_PITER_INCL_EMPTY_PART0 (1 << 3) /* include empty partition 0 */ struct disk_part_iter { struct gendisk *disk; -- cgit v1.1 From 4cd481f68dde99ac416003b825c835f71e364393 Mon Sep 17 00:00:00 2001 From: Jan Kiszka Date: Mon, 13 Apr 2009 11:59:32 +0200 Subject: KVM: Fix overlapping check for memory slots When checking for overlapping slots on registration of a new one, kvm currently also considers zero-length (ie. deleted) slots and rejects requests incorrectly. This finally denies user space from joining slots. Fix the check by skipping deleted slots and advertise this via a KVM_CAP_JOIN_MEMORY_REGIONS_WORKS. Cc: stable@kernel.org Signed-off-by: Jan Kiszka Signed-off-by: Avi Kivity --- include/linux/kvm.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux') diff --git a/include/linux/kvm.h b/include/linux/kvm.h index 311a073..8cc1379 100644 --- a/include/linux/kvm.h +++ b/include/linux/kvm.h @@ -409,6 +409,8 @@ struct kvm_trace_rec { #ifdef __KVM_HAVE_DEVICE_ASSIGNMENT #define KVM_CAP_DEVICE_DEASSIGNMENT 27 #endif +/* Another bug in KVM_SET_USER_MEMORY_REGION fixed: */ +#define KVM_CAP_JOIN_MEMORY_REGIONS_WORKS 30 #ifdef KVM_CAP_IRQ_ROUTING -- cgit v1.1 From 1b6b8ce2ac372ea1f2065b89228ede105eb68dc5 Mon Sep 17 00:00:00 2001 From: Yu Zhao Date: Thu, 9 Apr 2009 14:57:39 +0800 Subject: PCI: only save/restore existent registers in the PCIe capability PCIe 1.1 base neither requires the endpoint to implement the entire PCIe capability structure nor specifies default values of registers that are not implemented by the device. So we only save and restore registers that must be implemented by different device types if the device PCIe capability version is 1. PCIe 1.1 Capability Structure Expansion ECN and PCIe 2.0 requires all registers in the PCIe capability to be either implemented or hardwired to 0. Their PCIe capability version is 2. Signed-off-by: Yu Zhao Signed-off-by: Jesse Barnes --- include/linux/pci_regs.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/pci_regs.h b/include/linux/pci_regs.h index e4d08c1..616bf8b 100644 --- a/include/linux/pci_regs.h +++ b/include/linux/pci_regs.h @@ -376,6 +376,7 @@ #define PCI_EXP_TYPE_DOWNSTREAM 0x6 /* Downstream Port */ #define PCI_EXP_TYPE_PCI_BRIDGE 0x7 /* PCI/PCI-X Bridge */ #define PCI_EXP_TYPE_RC_END 0x9 /* Root Complex Integrated Endpoint */ +#define PCI_EXP_TYPE_RC_EC 0x10 /* Root Complex Event Collector */ #define PCI_EXP_FLAGS_SLOT 0x0100 /* Slot implemented */ #define PCI_EXP_FLAGS_IRQ 0x3e00 /* Interrupt message number */ #define PCI_EXP_DEVCAP 4 /* Device capabilities */ -- cgit v1.1 From 952043ac12a117d8e94bddd9088338d7ad20ca7d Mon Sep 17 00:00:00 2001 From: Steven Whitehouse Date: Thu, 23 Apr 2009 08:48:15 +0100 Subject: bitops: Add __ffs64 bitop Finds the first set bit in a 64 bit word. This is required in order to fix a bug in GFS2, but I think it should be a generic function in case of future users. Signed-off-by: Steven Whitehouse Reviewed-by: Christoph Lameter Reviewed-by: Willy Tarreau --- include/linux/bitops.h | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'include/linux') diff --git a/include/linux/bitops.h b/include/linux/bitops.h index 6182913..c05a29c 100644 --- a/include/linux/bitops.h +++ b/include/linux/bitops.h @@ -112,6 +112,25 @@ static inline unsigned fls_long(unsigned long l) return fls64(l); } +/** + * __ffs64 - find first set bit in a 64 bit word + * @word: The 64 bit word + * + * On 64 bit arches this is a synomyn for __ffs + * The result is not defined if no bits are set, so check that @word + * is non-zero before calling this. + */ +static inline unsigned long __ffs64(u64 word) +{ +#if BITS_PER_LONG == 32 + if (((u32)word) == 0UL) + return __ffs((u32)(word >> 32)) + 32; +#elif BITS_PER_LONG != 64 +#error BITS_PER_LONG not 32 or 64 +#endif + return __ffs((unsigned long)word); +} + #ifdef __KERNEL__ #ifdef CONFIG_GENERIC_FIND_FIRST_BIT -- cgit v1.1 From fbfc396efbc11d784b4325adfc02e82a0df01a8d Mon Sep 17 00:00:00 2001 From: "Mark A. Greer" Date: Tue, 21 Apr 2009 20:52:54 -0700 Subject: USB: musb: Prevent multiple includes of musb.h Add #ifndef to musb header file to prevent multiple inclusions. Signed-off-by: Mark A. Greer Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/musb.h | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'include/linux') diff --git a/include/linux/usb/musb.h b/include/linux/usb/musb.h index d6aad0e..d437556 100644 --- a/include/linux/usb/musb.h +++ b/include/linux/usb/musb.h @@ -7,6 +7,9 @@ * key configuration differences between boards. */ +#ifndef __LINUX_USB_MUSB_H +#define __LINUX_USB_MUSB_H + /* The USB role is defined by the connector used on the board, so long as * standards are being followed. (Developer boards sometimes won't.) */ @@ -101,3 +104,5 @@ extern int __init tusb6010_setup_interface( extern int tusb6010_platform_retime(unsigned is_refclk); #endif /* OMAP2 */ + +#endif /* __LINUX_USB_MUSB_H */ -- cgit v1.1 From 097102c2d04974bdfcfa16a5f3062d499842139c Mon Sep 17 00:00:00 2001 From: Alexander Beregalov Date: Tue, 21 Apr 2009 09:33:14 +0200 Subject: pktcdvd.h should include mempool.h Fix this build error: In file included from fs/compat_ioctl.c:104: include/linux/pktcdvd.h:285: error: expected specifier-qualifier-list before 'mempool_t' Signed-off-by: Alexander Beregalov Signed-off-by: Jens Axboe --- include/linux/pktcdvd.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/pktcdvd.h b/include/linux/pktcdvd.h index 04b4d73..d745f5b 100644 --- a/include/linux/pktcdvd.h +++ b/include/linux/pktcdvd.h @@ -113,6 +113,7 @@ struct pkt_ctrl_command { #include #include #include +#include /* default bio write queue congestion marks */ #define PKT_WRITE_CONGESTION_ON 10000 -- cgit v1.1 From 42dad7647aec49b3ad20dd0cb832b232a6ae514f Mon Sep 17 00:00:00 2001 From: Jerome Marchand Date: Wed, 22 Apr 2009 14:01:49 +0200 Subject: block: simplify I/O stat accounting This simplifies I/O stat accounting switching code and separates it completely from I/O scheduler switch code. Requests are accounted according to the state of their request queue at the time of the request allocation. There is no need anymore to flush the request queue when switching I/O accounting state. Signed-off-by: Jerome Marchand Signed-off-by: Jens Axboe --- include/linux/blkdev.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index ba54c83..2755d5c 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -118,6 +118,7 @@ enum rq_flag_bits { __REQ_COPY_USER, /* contains copies of user pages */ __REQ_INTEGRITY, /* integrity metadata has been remapped */ __REQ_NOIDLE, /* Don't anticipate more IO after this one */ + __REQ_IO_STAT, /* account I/O stat */ __REQ_NR_BITS, /* stops here */ }; @@ -145,6 +146,7 @@ enum rq_flag_bits { #define REQ_COPY_USER (1 << __REQ_COPY_USER) #define REQ_INTEGRITY (1 << __REQ_INTEGRITY) #define REQ_NOIDLE (1 << __REQ_NOIDLE) +#define REQ_IO_STAT (1 << __REQ_IO_STAT) #define BLK_MAX_CDB 16 @@ -598,6 +600,7 @@ enum { blk_failfast_transport(rq) || \ blk_failfast_driver(rq)) #define blk_rq_started(rq) ((rq)->cmd_flags & REQ_STARTED) +#define blk_rq_io_stat(rq) ((rq)->cmd_flags & REQ_IO_STAT) #define blk_account_rq(rq) (blk_rq_started(rq) && (blk_fs_request(rq) || blk_discard_rq(rq))) -- cgit v1.1 From 71951b64a5a87c09eb6fde59ce51aaab2fdaeab2 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Fri, 24 Apr 2009 16:58:41 +0200 Subject: netfilter: nf_ct_dccp: add missing role attributes for DCCP This patch adds missing role attribute to the DCCP type, otherwise the creation of entries is not of any use. The attribute added is CTA_PROTOINFO_DCCP_ROLE which contains the role of the conntrack original tuple. Signed-off-by: Pablo Neira Ayuso Signed-off-by: Patrick McHardy --- include/linux/netfilter/nfnetlink_conntrack.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/netfilter/nfnetlink_conntrack.h b/include/linux/netfilter/nfnetlink_conntrack.h index 29fe9ea..1a865e4 100644 --- a/include/linux/netfilter/nfnetlink_conntrack.h +++ b/include/linux/netfilter/nfnetlink_conntrack.h @@ -100,6 +100,7 @@ enum ctattr_protoinfo_tcp { enum ctattr_protoinfo_dccp { CTA_PROTOINFO_DCCP_UNSPEC, CTA_PROTOINFO_DCCP_STATE, + CTA_PROTOINFO_DCCP_ROLE, __CTA_PROTOINFO_DCCP_MAX, }; #define CTA_PROTOINFO_DCCP_MAX (__CTA_PROTOINFO_DCCP_MAX - 1) -- cgit v1.1 From c80d471a476b6d6fe0bc1fd25293c24c66b7aaaf Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Sat, 25 Apr 2009 22:10:56 -0400 Subject: Add new HEAD_TEXT_SECTION macro. This patch is preparation for replacing all uses of ".head.text" or ".text.head" in the kernel with macros, so that the section name can later be changed without having to touch a lot of the kernel. Since some linker scripts do more complex things than referencing HEAD_TEXT, we add a HEAD_TEXT_SECTION macro that just contains the actual name. I've defined HEAD_TEXT_SECTION in a new header, include/linux/section-names.h, so that this section name only needs to appear in one place. I anticipate creating similar macro structures for a number of other section names. The long-term goal here is to be able to change the kernel's magic section names to those that are compatible with -ffunction-sections -fdata-sections. This requires renaming all magic sections with names of the form ".text.foo". Signed-off-by: Tim Abbott Signed-off-by: Linus Torvalds --- include/linux/init.h | 4 +++- include/linux/section-names.h | 6 ++++++ 2 files changed, 9 insertions(+), 1 deletion(-) create mode 100644 include/linux/section-names.h (limited to 'include/linux') diff --git a/include/linux/init.h b/include/linux/init.h index f121a7a..20a1334 100644 --- a/include/linux/init.h +++ b/include/linux/init.h @@ -2,6 +2,8 @@ #define _LINUX_INIT_H #include +#include +#include /* These macros are used to mark some functions or * initialized data (doesn't apply to uninitialized data) @@ -107,7 +109,7 @@ #define __memexitconst __section(.memexit.rodata) /* For assembly routines */ -#define __HEAD .section ".head.text","ax" +#define __HEAD .section __stringify(HEAD_TEXT_SECTION),"ax" #define __INIT .section ".init.text","ax" #define __FINIT .previous diff --git a/include/linux/section-names.h b/include/linux/section-names.h new file mode 100644 index 0000000..c956f4e --- /dev/null +++ b/include/linux/section-names.h @@ -0,0 +1,6 @@ +#ifndef __LINUX_SECTION_NAMES_H +#define __LINUX_SECTION_NAMES_H + +#define HEAD_TEXT_SECTION .head.text + +#endif /* !__LINUX_SECTION_NAMES_H */ -- cgit v1.1 From c759a6b4e1cae6aff71f58c9c85404ebcd81b6e0 Mon Sep 17 00:00:00 2001 From: Adrian Bunk Date: Mon, 27 Apr 2009 02:36:20 -0700 Subject: net: Fix LL_MAX_HEADER for CONFIG_TR_MODULE Unless I miss anything this should fix a bug. Signed-off-by: Adrian Bunk Signed-off-by: David S. Miller --- include/linux/netdevice.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 2e7783f..453be9a 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -104,7 +104,7 @@ struct wireless_dev; # else # define LL_MAX_HEADER 96 # endif -#elif defined(CONFIG_TR) +#elif defined(CONFIG_TR) || defined(CONFIG_TR_MODULE) # define LL_MAX_HEADER 48 #else # define LL_MAX_HEADER 32 -- cgit v1.1 From 37b607c5ac3b7c92a6a3624bb29f1cdcdcf7044a Mon Sep 17 00:00:00 2001 From: Mike Rapoport Date: Mon, 27 Apr 2009 05:45:54 -0700 Subject: net: Fix typo in net_device_ops description. Signed-off-by: Mike Rapoport Signed-off-by: David S. Miller --- include/linux/netdevice.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h index 453be9a..5a96a1a 100644 --- a/include/linux/netdevice.h +++ b/include/linux/netdevice.h @@ -500,7 +500,7 @@ struct netdev_queue { * * int (*ndo_set_mac_address)(struct net_device *dev, void *addr); * This function is called when the Media Access Control address - * needs to be changed. If not this interface is not defined, the + * needs to be changed. If this interface is not defined, the * mac address can not be changed. * * int (*ndo_validate_addr)(struct net_device *dev); -- cgit v1.1 From 27b1833279995e7c290a40cac4ef36ccea7e9283 Mon Sep 17 00:00:00 2001 From: Tim Abbott Date: Mon, 27 Apr 2009 14:02:27 -0400 Subject: Remove unused support code for refok sections. The old refok sections .text.init.refok .data.init.refok .exit.text.refok have been deprecated since commit 312b1485fb509c9bc32eda28ad29537896658cb8. After the other patches in this patch series nothing is put in these sections, so clean things up by eliminating all the remaining references to them. Signed-off-by: Tim Abbott Acked-by: Sam Ravnborg Signed-off-by: Linus Torvalds --- include/linux/init.h | 8 -------- 1 file changed, 8 deletions(-) (limited to 'include/linux') diff --git a/include/linux/init.h b/include/linux/init.h index 20a1334..0e06c17 100644 --- a/include/linux/init.h +++ b/include/linux/init.h @@ -62,14 +62,6 @@ #define __refdata __section(.ref.data) #define __refconst __section(.ref.rodata) -/* backward compatibility note - * A few places hardcode the old section names: - * .text.init.refok - * .data.init.refok - * .exit.text.refok - * They should be converted to use the defines from this file - */ - /* compatibility defines */ #define __init_refok __ref #define __initdata_refok __refdata -- cgit v1.1 From bf368e4e70cd4e0f880923c44e95a4273d725ab4 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 28 Apr 2009 02:24:21 -0700 Subject: net: Avoid extra wakeups of threads blocked in wait_for_packet() In 2.6.25 we added UDP mem accounting. This unfortunatly added a penalty when a frame is transmitted, since we have at TX completion time to call sock_wfree() to perform necessary memory accounting. This calls sock_def_write_space() and utimately scheduler if any thread is waiting on the socket. Thread(s) waiting for an incoming frame was scheduled, then had to sleep again as event was meaningless. (All threads waiting on a socket are using same sk_sleep anchor) This adds lot of extra wakeups and increases latencies, as noted by Christoph Lameter, and slows down softirq handler. Reference : http://marc.info/?l=linux-netdev&m=124060437012283&w=2 Fortunatly, Davide Libenzi recently added concept of keyed wakeups into kernel, and particularly for sockets (see commit 37e5540b3c9d838eb20f2ca8ea2eb8072271e403 epoll keyed wakeups: make sockets use keyed wakeups) Davide goal was to optimize epoll, but this new wakeup infrastructure can help non epoll users as well, if they care to setup an appropriate handler. This patch introduces new DEFINE_WAIT_FUNC() helper and uses it in wait_for_packet(), so that only relevant event can wakeup a thread blocked in this function. Trace of function calls from bnx2 TX completion bnx2_poll_work() is : __kfree_skb() skb_release_head_state() sock_wfree() sock_def_write_space() __wake_up_sync_key() __wake_up_common() receiver_wake_function() : Stops here since thread is waiting for an INPUT Reported-by: Christoph Lameter Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/wait.h | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/wait.h b/include/linux/wait.h index 5d631c1..bc02463 100644 --- a/include/linux/wait.h +++ b/include/linux/wait.h @@ -440,13 +440,15 @@ void abort_exclusive_wait(wait_queue_head_t *q, wait_queue_t *wait, int autoremove_wake_function(wait_queue_t *wait, unsigned mode, int sync, void *key); int wake_bit_function(wait_queue_t *wait, unsigned mode, int sync, void *key); -#define DEFINE_WAIT(name) \ +#define DEFINE_WAIT_FUNC(name, function) \ wait_queue_t name = { \ .private = current, \ - .func = autoremove_wake_function, \ + .func = function, \ .task_list = LIST_HEAD_INIT((name).task_list), \ } +#define DEFINE_WAIT(name) DEFINE_WAIT_FUNC(name, autoremove_wake_function) + #define DEFINE_WAIT_BIT(name, word, bit) \ struct wait_bit_queue name = { \ .key = __WAIT_BIT_KEY_INITIALIZER(word, bit), \ -- cgit v1.1 From 6916d97f6e25cc66a32d6e9a16419067d843b14f Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Mon, 27 Apr 2009 11:52:43 -0700 Subject: Input: bcm5974 - add quad-finger tapping The integrated button on the new unibody Macbooks presents a need to report explicit four-finger actions. Evidently, the finger pressing the button is also touching the trackpad, so in order to fully support three-finger actions, the driver must be able to report four-finger actions. This patch adds a new button, BTN_TOOL_QUADTAP, which achieves this. Signed-off-by: Henrik Rydberg Signed-off-by: Dmitry Torokhov --- include/linux/input.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/input.h b/include/linux/input.h index 6b28048..32cb825 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -445,6 +445,7 @@ struct input_absinfo { #define BTN_STYLUS2 0x14c #define BTN_TOOL_DOUBLETAP 0x14d #define BTN_TOOL_TRIPLETAP 0x14e +#define BTN_TOOL_QUADTAP 0x14f /* Four fingers on trackpad */ #define BTN_WHEEL 0x150 #define BTN_GEAR_DOWN 0x150 -- cgit v1.1 From 5e5ee686e3c0f8a3cbe9b75c2690326bf91af10d Mon Sep 17 00:00:00 2001 From: Henrik Rydberg Date: Tue, 28 Apr 2009 07:47:33 -0700 Subject: Input: add detailed multi-touch finger data report protocol In order to utilize the full power of the new multi-touch devices, a way to report detailed finger data to user space is needed. This patch adds a multi-touch (MT) protocol which allows drivers to report details for an arbitrary number of fingers. The driver sends a SYN_MT_REPORT event via the input_mt_sync() function when a complete finger has been reported. In order to stay compatible with existing applications, the data reported in a finger packet must not be recognized as single-touch events. In addition, all finger data must bypass input filtering, since subsequent events of the same type refer to different fingers. A set of ABS_MT events with the desired properties are defined. The events are divided into categories, to allow for partial implementation. The minimum set consists of ABS_MT_TOUCH_MAJOR, ABS_MT_POSITION_X and ABS_MT_POSITION_Y, which allows for multiple fingers to be tracked. If the device supports it, the ABS_MT_WIDTH_MAJOR may be used to provide the size of the approaching finger. Anisotropy and direction may be specified with ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION. Devices with more granular information may specify general shapes as blobs, i.e., as a sequence of rectangular shapes grouped together by a ABS_MT_BLOB_ID. Finally, the ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a finger or a pen. Signed-off-by: Henrik Rydberg Signed-off-by: Dmitry Torokhov --- include/linux/input.h | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) (limited to 'include/linux') diff --git a/include/linux/input.h b/include/linux/input.h index 32cb825..0e6ff5d 100644 --- a/include/linux/input.h +++ b/include/linux/input.h @@ -106,6 +106,7 @@ struct input_absinfo { #define SYN_REPORT 0 #define SYN_CONFIG 1 +#define SYN_MT_REPORT 2 /* * Keys and buttons @@ -645,6 +646,17 @@ struct input_absinfo { #define ABS_TOOL_WIDTH 0x1c #define ABS_VOLUME 0x20 #define ABS_MISC 0x28 + +#define ABS_MT_TOUCH_MAJOR 0x30 /* Major axis of touching ellipse */ +#define ABS_MT_TOUCH_MINOR 0x31 /* Minor axis (omit if circular) */ +#define ABS_MT_WIDTH_MAJOR 0x32 /* Major axis of approaching ellipse */ +#define ABS_MT_WIDTH_MINOR 0x33 /* Minor axis (omit if circular) */ +#define ABS_MT_ORIENTATION 0x34 /* Ellipse orientation */ +#define ABS_MT_POSITION_X 0x35 /* Center X ellipse position */ +#define ABS_MT_POSITION_Y 0x36 /* Center Y ellipse position */ +#define ABS_MT_TOOL_TYPE 0x37 /* Type of touching device */ +#define ABS_MT_BLOB_ID 0x38 /* Group a set of packets as a blob */ + #define ABS_MAX 0x3f #define ABS_CNT (ABS_MAX+1) @@ -744,6 +756,12 @@ struct input_absinfo { #define BUS_ATARI 0x1B /* + * MT_TOOL types + */ +#define MT_TOOL_FINGER 0 +#define MT_TOOL_PEN 1 + +/* * Values describing the status of a force-feedback effect */ #define FF_STATUS_STOPPED 0x00 @@ -1312,6 +1330,11 @@ static inline void input_sync(struct input_dev *dev) input_event(dev, EV_SYN, SYN_REPORT, 0); } +static inline void input_mt_sync(struct input_dev *dev) +{ + input_event(dev, EV_SYN, SYN_MT_REPORT, 0); +} + void input_set_capability(struct input_dev *dev, unsigned int type, unsigned int code); static inline void input_set_abs_params(struct input_dev *dev, int axis, int min, int max, int fuzz, int flat) -- cgit v1.1 From 9f6532519feab921856f41b30a2397ee25f4de49 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 3 Apr 2009 21:31:30 -0700 Subject: regulator: fix header file missing kernel-doc Add regulator header file missing kernel-doc: Warning(include/linux/regulator/driver.h:117): No description found for parameter 'set_mode' Signed-off-by: Randy Dunlap cc: Liam Girdwood cc: Mark Brown Signed-off-by: Liam Girdwood --- include/linux/regulator/driver.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 4848d8d..225f733 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -50,6 +50,7 @@ enum regulator_status { * @set_current_limit: Configure a limit for a current-limited regulator. * @get_current_limit: Get the configured limit for a current-limited regulator. * + * @set_mode: Set the configured operating mode for the regulator. * @get_mode: Get the configured operating mode for the regulator. * @get_status: Return actual (not as-configured) status of regulator, as a * REGULATOR_STATUS value (or negative errno) -- cgit v1.1 From 942e4a2bd680c606af0211e64eb216be2e19bf61 Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Tue, 28 Apr 2009 22:36:33 -0700 Subject: netfilter: revised locking for x_tables The x_tables are organized with a table structure and a per-cpu copies of the counters and rules. On older kernels there was a reader/writer lock per table which was a performance bottleneck. In 2.6.30-rc, this was converted to use RCU and the counters/rules which solved the performance problems for do_table but made replacing rules much slower because of the necessary RCU grace period. This version uses a per-cpu set of spinlocks and counters to allow to table processing to proceed without the cache thrashing of a global reader lock and keeps the same performance for table updates. Signed-off-by: Stephen Hemminger Acked-by: Linus Torvalds Signed-off-by: David S. Miller --- include/linux/netfilter/x_tables.h | 73 +++++++++++++++++++++++++++++++++++--- 1 file changed, 68 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netfilter/x_tables.h b/include/linux/netfilter/x_tables.h index 7b1a652..1b2e435 100644 --- a/include/linux/netfilter/x_tables.h +++ b/include/linux/netfilter/x_tables.h @@ -354,9 +354,6 @@ struct xt_table /* What hooks you will enter on */ unsigned int valid_hooks; - /* Lock for the curtain */ - struct mutex lock; - /* Man behind the curtain... */ struct xt_table_info *private; @@ -434,8 +431,74 @@ extern void xt_proto_fini(struct net *net, u_int8_t af); extern struct xt_table_info *xt_alloc_table_info(unsigned int size); extern void xt_free_table_info(struct xt_table_info *info); -extern void xt_table_entry_swap_rcu(struct xt_table_info *old, - struct xt_table_info *new); + +/* + * Per-CPU spinlock associated with per-cpu table entries, and + * with a counter for the "reading" side that allows a recursive + * reader to avoid taking the lock and deadlocking. + * + * "reading" is used by ip/arp/ip6 tables rule processing which runs per-cpu. + * It needs to ensure that the rules are not being changed while the packet + * is being processed. In some cases, the read lock will be acquired + * twice on the same CPU; this is okay because of the count. + * + * "writing" is used when reading counters. + * During replace any readers that are using the old tables have to complete + * before freeing the old table. This is handled by the write locking + * necessary for reading the counters. + */ +struct xt_info_lock { + spinlock_t lock; + unsigned char readers; +}; +DECLARE_PER_CPU(struct xt_info_lock, xt_info_locks); + +/* + * Note: we need to ensure that preemption is disabled before acquiring + * the per-cpu-variable, so we do it as a two step process rather than + * using "spin_lock_bh()". + * + * We _also_ need to disable bottom half processing before updating our + * nesting count, to make sure that the only kind of re-entrancy is this + * code being called by itself: since the count+lock is not an atomic + * operation, we can allow no races. + * + * _Only_ that special combination of being per-cpu and never getting + * re-entered asynchronously means that the count is safe. + */ +static inline void xt_info_rdlock_bh(void) +{ + struct xt_info_lock *lock; + + local_bh_disable(); + lock = &__get_cpu_var(xt_info_locks); + if (!lock->readers++) + spin_lock(&lock->lock); +} + +static inline void xt_info_rdunlock_bh(void) +{ + struct xt_info_lock *lock = &__get_cpu_var(xt_info_locks); + + if (!--lock->readers) + spin_unlock(&lock->lock); + local_bh_enable(); +} + +/* + * The "writer" side needs to get exclusive access to the lock, + * regardless of readers. This must be called with bottom half + * processing (and thus also preemption) disabled. + */ +static inline void xt_info_wrlock(unsigned int cpu) +{ + spin_lock(&per_cpu(xt_info_locks, cpu).lock); +} + +static inline void xt_info_wrunlock(unsigned int cpu) +{ + spin_unlock(&per_cpu(xt_info_locks, cpu).lock); +} /* * This helper is performance critical and must be inlined -- cgit v1.1 From d37dc42ab6f040b8f0f2962ab219c5b2accf748d Mon Sep 17 00:00:00 2001 From: Jeff Layton Date: Thu, 30 Apr 2009 06:45:08 -0400 Subject: nls: add a nls_nullsize inline It's possible for character sets to require a multi-byte null string terminator. Add a helper function that determines the size of the null terminator at runtime. Signed-off-by: Jeff Layton Acked-by: Suresh Jayaraman Signed-off-by: Steve French --- include/linux/nls.h | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) (limited to 'include/linux') diff --git a/include/linux/nls.h b/include/linux/nls.h index 6a88220..52b1a76 100644 --- a/include/linux/nls.h +++ b/include/linux/nls.h @@ -58,6 +58,25 @@ static inline int nls_strnicmp(struct nls_table *t, const unsigned char *s1, return 0; } +/* + * nls_nullsize - return length of null character for codepage + * @codepage - codepage for which to return length of NULL terminator + * + * Since we can't guarantee that the null terminator will be a particular + * length, we have to check against the codepage. If there's a problem + * determining it, assume a single-byte NULL terminator. + */ +static inline int +nls_nullsize(const struct nls_table *codepage) +{ + int charlen; + char tmp[NLS_MAX_CHARSET_SIZE]; + + charlen = codepage->uni2char(0, tmp, NLS_MAX_CHARSET_SIZE); + + return charlen > 0 ? charlen : 1; +} + #define MODULE_ALIAS_NLS(name) MODULE_ALIAS("nls_" __stringify(name)) #endif /* _LINUX_NLS_H */ -- cgit v1.1 From 96c16743973e8c1a7b9c655d10b7973408d6d1dd Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Thu, 30 Apr 2009 18:24:34 +0200 Subject: ide-cd: fix REQ_QUIET tests in cdrom_decode_status Original patch (dfa4411cc3a690011cab90e9a536938795366cf9) was buggy. This is a more proper fix which introduces blk_rq_quiet() macro alleviating the need for dumb, too short caching variables. Thanks to Helge Deller and Bart for debugging this. Signed-off-by: Borislav Petkov Cc: Jens Axboe Cc: Sergei Shtylyov Reported-and-tested-by: Helge Deller Signed-off-by: Bartlomiej Zolnierkiewicz --- include/linux/blkdev.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index ba54c83..6f841fb 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -598,6 +598,7 @@ enum { blk_failfast_transport(rq) || \ blk_failfast_driver(rq)) #define blk_rq_started(rq) ((rq)->cmd_flags & REQ_STARTED) +#define blk_rq_quiet(rq) ((rq)->cmd_flags & REQ_QUIET) #define blk_account_rq(rq) (blk_rq_started(rq) && (blk_fs_request(rq) || blk_discard_rq(rq))) -- cgit v1.1 From 0f3d042ed2f934f149ccb78300454beaf0c1134b Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 1 May 2009 09:10:46 -0700 Subject: netfilter: use likely() in xt_info_rdlock_bh() Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- include/linux/netfilter/x_tables.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/netfilter/x_tables.h b/include/linux/netfilter/x_tables.h index 1b2e435..c9efe03 100644 --- a/include/linux/netfilter/x_tables.h +++ b/include/linux/netfilter/x_tables.h @@ -472,7 +472,7 @@ static inline void xt_info_rdlock_bh(void) local_bh_disable(); lock = &__get_cpu_var(xt_info_locks); - if (!lock->readers++) + if (likely(!lock->readers++)) spin_lock(&lock->lock); } @@ -480,7 +480,7 @@ static inline void xt_info_rdunlock_bh(void) { struct xt_info_lock *lock = &__get_cpu_var(xt_info_locks); - if (!--lock->readers) + if (likely(!--lock->readers)) spin_unlock(&lock->lock); local_bh_enable(); } -- cgit v1.1 From c047fcd245975f40312ed57bf43e7d4abd188e6b Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Fri, 1 May 2009 15:34:02 -0700 Subject: virtio: add missing include to virtio_net.h virtio_net.h uses the macro ETH_ALEN which is defined in linux/if_ether.h. Discovered when hacking on virtio-over-pci patches. Signed-off-by: Grant Likely Signed-off-by: David S. Miller --- include/linux/virtio_net.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h index 242348b..cec79ad 100644 --- a/include/linux/virtio_net.h +++ b/include/linux/virtio_net.h @@ -4,6 +4,7 @@ * compatible drivers/servers. */ #include #include +#include /* The ID for virtio_net */ #define VIRTIO_ID_NET 1 -- cgit v1.1 From ae3abae64f177586be55b04a7fb7047a34b21a3e Mon Sep 17 00:00:00 2001 From: Daisuke Nishimura Date: Thu, 30 Apr 2009 15:08:19 -0700 Subject: memcg: fix mem_cgroup_shrink_usage() Current mem_cgroup_shrink_usage() has two problems. 1. It doesn't call mem_cgroup_out_of_memory and doesn't update last_oom_jiffies, so pagefault_out_of_memory invokes global OOM. 2. Considering hierarchy, shrinking has to be done from the mem_over_limit, not from the memcg which the page would be charged to. mem_cgroup_try_charge_swapin() does all of these things properly, so we use it and call cancel_charge_swapin when it succeeded. The name of "shrink_usage" is not appropriate for this behavior, so we change it too. Signed-off-by: Daisuke Nishimura Acked-by: KAMEZAWA Hiroyuki Cc: Li Zefan Cc: Paul Menage Cc: Dhaval Giani Cc: Daisuke Nishimura Cc: YAMAMOTO Takashi Cc: KOSAKI Motohiro Cc: David Rientjes Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/memcontrol.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h index a9e3b76..25b9ca9 100644 --- a/include/linux/memcontrol.h +++ b/include/linux/memcontrol.h @@ -56,7 +56,7 @@ extern void mem_cgroup_move_lists(struct page *page, enum lru_list from, enum lru_list to); extern void mem_cgroup_uncharge_page(struct page *page); extern void mem_cgroup_uncharge_cache_page(struct page *page); -extern int mem_cgroup_shrink_usage(struct page *page, +extern int mem_cgroup_shmem_charge_fallback(struct page *page, struct mm_struct *mm, gfp_t gfp_mask); extern unsigned long mem_cgroup_isolate_pages(unsigned long nr_to_scan, @@ -155,7 +155,7 @@ static inline void mem_cgroup_uncharge_cache_page(struct page *page) { } -static inline int mem_cgroup_shrink_usage(struct page *page, +static inline int mem_cgroup_shmem_charge_fallback(struct page *page, struct mm_struct *mm, gfp_t gfp_mask) { return 0; -- cgit v1.1 From 74641f584da8eccf30becfbb5507ab457187db22 Mon Sep 17 00:00:00 2001 From: Ivan Kokshaysky Date: Thu, 30 Apr 2009 15:08:49 -0700 Subject: alpha: binfmt_aout fix This fixes the problem introduced by commit 3bfacef412 (get rid of special-casing the /sbin/loader on alpha): osf/1 ecoff binary segfaults when binfmt_aout built as module. That happens because aout binary handler gets on the top of the binfmt list due to late registration, and kernel attempts to execute the binary without preparatory work that must be done by binfmt_loader. Fixed by changing the registration order of the default binfmt handlers using list_add_tail() and introducing insert_binfmt() function which places new handler on the top of the binfmt list. This might be generally useful for installing arch-specific frontends for default handlers or just for overriding them. Signed-off-by: Ivan Kokshaysky Cc: Al Viro Cc: Richard Henderson Signed-off-by: Linus Torvalds --- include/linux/binfmts.h | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/binfmts.h b/include/linux/binfmts.h index 6638b81..61ee18c 100644 --- a/include/linux/binfmts.h +++ b/include/linux/binfmts.h @@ -82,7 +82,19 @@ struct linux_binfmt { int hasvdso; }; -extern int register_binfmt(struct linux_binfmt *); +extern int __register_binfmt(struct linux_binfmt *fmt, int insert); + +/* Registration of default binfmt handlers */ +static inline int register_binfmt(struct linux_binfmt *fmt) +{ + return __register_binfmt(fmt, 0); +} +/* Same as above, but adds a new binfmt at the top of the list */ +static inline int insert_binfmt(struct linux_binfmt *fmt) +{ + return __register_binfmt(fmt, 1); +} + extern void unregister_binfmt(struct linux_binfmt *); extern int prepare_binprm(struct linux_binprm *); -- cgit v1.1 From 0763ed2355198cdef2f6a2098e9d52eb1fe4365d Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Thu, 30 Apr 2009 15:08:50 -0700 Subject: of: make of_(un)register_platform_driver common code Some drivers using of_register_platform_driver() wrapper break on sparc because the wrapper isn't in the header file. This patch moves it from Microblaze and PowerPC implementations and makes it common code. Fixes this sparc64 allmodconfig build error (at least): drivers/leds/leds-gpio.c: In function `gpio_led_init': drivers/leds/leds-gpio.c:295: error: implicit declaration of function `of_register_platform_driver' drivers/leds/leds-gpio.c: In function `gpio_led_exit': drivers/leds/leds-gpio.c:311: error: implicit declaration of function `of_unregister_platform_driver' Signed-off-by: Grant Likely Acked-by: David S. Miller Cc: Michal Simek Cc: Benjamin Herrenschmidt Cc: Stephen Rothwell Cc: Richard Purdie Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/of_platform.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include/linux') diff --git a/include/linux/of_platform.h b/include/linux/of_platform.h index 3d327b6..9084066 100644 --- a/include/linux/of_platform.h +++ b/include/linux/of_platform.h @@ -51,6 +51,16 @@ extern int of_register_driver(struct of_platform_driver *drv, struct bus_type *bus); extern void of_unregister_driver(struct of_platform_driver *drv); +/* Platform drivers register/unregister */ +static inline int of_register_platform_driver(struct of_platform_driver *drv) +{ + return of_register_driver(drv, &of_platform_bus_type); +} +static inline void of_unregister_platform_driver(struct of_platform_driver *drv) +{ + of_unregister_driver(drv); +} + #include extern struct of_device *of_find_device_by_node(struct device_node *np); -- cgit v1.1 From 00a62ce91e554198ef28234c91c36f850f5a3bc9 Mon Sep 17 00:00:00 2001 From: KOSAKI Motohiro Date: Thu, 30 Apr 2009 15:08:51 -0700 Subject: mm: fix Committed_AS underflow on large NR_CPUS environment The Committed_AS field can underflow in certain situations: > # while true; do cat /proc/meminfo | grep _AS; sleep 1; done | uniq -c > 1 Committed_AS: 18446744073709323392 kB > 11 Committed_AS: 18446744073709455488 kB > 6 Committed_AS: 35136 kB > 5 Committed_AS: 18446744073709454400 kB > 7 Committed_AS: 35904 kB > 3 Committed_AS: 18446744073709453248 kB > 2 Committed_AS: 34752 kB > 9 Committed_AS: 18446744073709453248 kB > 8 Committed_AS: 34752 kB > 3 Committed_AS: 18446744073709320960 kB > 7 Committed_AS: 18446744073709454080 kB > 3 Committed_AS: 18446744073709320960 kB > 5 Committed_AS: 18446744073709454080 kB > 6 Committed_AS: 18446744073709320960 kB Because NR_CPUS can be greater than 1000 and meminfo_proc_show() does not check for underflow. But NR_CPUS proportional isn't good calculation. In general, possibility of lock contention is proportional to the number of online cpus, not theorical maximum cpus (NR_CPUS). The current kernel has generic percpu-counter stuff. using it is right way. it makes code simplify and percpu_counter_read_positive() don't make underflow issue. Reported-by: Dave Hansen Signed-off-by: KOSAKI Motohiro Cc: Eric B Munson Cc: Mel Gorman Cc: Christoph Lameter Cc: [All kernel versions] Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- include/linux/mman.h | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) (limited to 'include/linux') diff --git a/include/linux/mman.h b/include/linux/mman.h index 30d1073..9872d6c 100644 --- a/include/linux/mman.h +++ b/include/linux/mman.h @@ -12,21 +12,18 @@ #ifdef __KERNEL__ #include +#include #include extern int sysctl_overcommit_memory; extern int sysctl_overcommit_ratio; -extern atomic_long_t vm_committed_space; +extern struct percpu_counter vm_committed_as; -#ifdef CONFIG_SMP -extern void vm_acct_memory(long pages); -#else static inline void vm_acct_memory(long pages) { - atomic_long_add(pages, &vm_committed_space); + percpu_counter_add(&vm_committed_as, pages); } -#endif static inline void vm_unacct_memory(long pages) { -- cgit v1.1 From f75e6745aa3084124ae1434fd7629853bdaf6798 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Tue, 21 Apr 2009 17:18:20 -0400 Subject: SUNRPC: Fix the problem of EADDRNOTAVAIL syslog floods on reconnect See http://bugzilla.kernel.org/show_bug.cgi?id=13034 If the port gets into a TIME_WAIT state, then we cannot reconnect without binding to a new port. Tested-by: Petr Vandrovec Tested-by: Jean Delvare Signed-off-by: Trond Myklebust Signed-off-by: Linus Torvalds --- include/linux/sunrpc/xprt.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h index 1758d9f..08afe43 100644 --- a/include/linux/sunrpc/xprt.h +++ b/include/linux/sunrpc/xprt.h @@ -261,6 +261,7 @@ void xprt_conditional_disconnect(struct rpc_xprt *xprt, unsigned int cookie); #define XPRT_BINDING (5) #define XPRT_CLOSING (6) #define XPRT_CONNECTION_ABORT (7) +#define XPRT_CONNECTION_CLOSE (8) static inline void xprt_set_connected(struct rpc_xprt *xprt) { -- cgit v1.1 From 9f722c0978b04acba209f8ca1896ad05814bc3a3 Mon Sep 17 00:00:00 2001 From: Omar Laazimani Date: Mon, 4 May 2009 12:01:43 -0700 Subject: usbnet: CDC EEM support (v5) This introduces a CDC Ethernet Emulation Model (EEM) host side driver to support USB EEM devices. EEM is different from the Ethernet Control Model (ECM) currently supported by the "CDC Ethernet" driver. One key difference is that it doesn't require of USB interface alternate settings to manage interface state; some maldesigned hardware can't handle that part of USB. It also avoids a separate USB interface for control and status updates. [ dbrownell@users.sourceforge.net: fix skb leaks, add rx packet checks, improve fault handling, EEM conformance updates, cleanup ] Signed-off-by: Omar Laazimani Signed-off-by: David Brownell Signed-off-by: David S. Miller --- include/linux/usb/cdc.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/usb/cdc.h b/include/linux/usb/cdc.h index 3c86ed2..c24124a 100644 --- a/include/linux/usb/cdc.h +++ b/include/linux/usb/cdc.h @@ -17,6 +17,7 @@ #define USB_CDC_SUBCLASS_DMM 0x09 #define USB_CDC_SUBCLASS_MDLM 0x0a #define USB_CDC_SUBCLASS_OBEX 0x0b +#define USB_CDC_SUBCLASS_EEM 0x0c #define USB_CDC_PROTO_NONE 0 @@ -28,6 +29,8 @@ #define USB_CDC_ACM_PROTO_AT_CDMA 6 #define USB_CDC_ACM_PROTO_VENDOR 0xff +#define USB_CDC_PROTO_EEM 7 + /*-------------------------------------------------------------------------*/ /* -- cgit v1.1