From f0ae849df1cd6b597130d890f2107ee31bf02c19 Mon Sep 17 00:00:00 2001 From: Hao Wu Date: Thu, 5 Aug 2010 14:17:28 +0100 Subject: usb: Add Intel Langwell USB OTG Transceiver Driver This adds support for the USB transceiver driver in the Langwell chipset used on the Intel MID platforms. It folds up the original patch set which includes basic support for the device, PHY low power mode (Please notice that there is a limitation, after we drive VBus down, 2ms delay is required from SCU FW to sync up OTGSC register with USBCFG register), software timers (the hardware timers do not work in low power mode), HNP, SRP. Signed-off-by: Hao Wu Signed-off-by: Alek Du Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/langwell_otg.h | 139 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 139 insertions(+) create mode 100644 include/linux/usb/langwell_otg.h (limited to 'include/linux') diff --git a/include/linux/usb/langwell_otg.h b/include/linux/usb/langwell_otg.h new file mode 100644 index 0000000..a6562f1 --- /dev/null +++ b/include/linux/usb/langwell_otg.h @@ -0,0 +1,139 @@ +/* + * Intel Langwell USB OTG transceiver driver + * Copyright (C) 2008, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + */ + +#ifndef __LANGWELL_OTG_H +#define __LANGWELL_OTG_H + +#include + +#define CI_USBCMD 0x30 +# define USBCMD_RST BIT(1) +# define USBCMD_RS BIT(0) +#define CI_USBSTS 0x34 +# define USBSTS_SLI BIT(8) +# define USBSTS_URI BIT(6) +# define USBSTS_PCI BIT(2) +#define CI_PORTSC1 0x74 +# define PORTSC_PP BIT(12) +# define PORTSC_LS (BIT(11) | BIT(10)) +# define PORTSC_SUSP BIT(7) +# define PORTSC_CCS BIT(0) +#define CI_HOSTPC1 0xb4 +# define HOSTPC1_PHCD BIT(22) +#define CI_OTGSC 0xf4 +# define OTGSC_DPIE BIT(30) +# define OTGSC_1MSE BIT(29) +# define OTGSC_BSEIE BIT(28) +# define OTGSC_BSVIE BIT(27) +# define OTGSC_ASVIE BIT(26) +# define OTGSC_AVVIE BIT(25) +# define OTGSC_IDIE BIT(24) +# define OTGSC_DPIS BIT(22) +# define OTGSC_1MSS BIT(21) +# define OTGSC_BSEIS BIT(20) +# define OTGSC_BSVIS BIT(19) +# define OTGSC_ASVIS BIT(18) +# define OTGSC_AVVIS BIT(17) +# define OTGSC_IDIS BIT(16) +# define OTGSC_DPS BIT(14) +# define OTGSC_1MST BIT(13) +# define OTGSC_BSE BIT(12) +# define OTGSC_BSV BIT(11) +# define OTGSC_ASV BIT(10) +# define OTGSC_AVV BIT(9) +# define OTGSC_ID BIT(8) +# define OTGSC_HABA BIT(7) +# define OTGSC_HADP BIT(6) +# define OTGSC_IDPU BIT(5) +# define OTGSC_DP BIT(4) +# define OTGSC_OT BIT(3) +# define OTGSC_HAAR BIT(2) +# define OTGSC_VC BIT(1) +# define OTGSC_VD BIT(0) +# define OTGSC_INTEN_MASK (0x7f << 24) +# define OTGSC_INT_MASK (0x5f << 24) +# define OTGSC_INTSTS_MASK (0x7f << 16) +#define CI_USBMODE 0xf8 +# define USBMODE_CM (BIT(1) | BIT(0)) +# define USBMODE_IDLE 0 +# define USBMODE_DEVICE 0x2 +# define USBMODE_HOST 0x3 +#define USBCFG_ADDR 0xff10801c +#define USBCFG_LEN 4 +# define USBCFG_VBUSVAL BIT(14) +# define USBCFG_AVALID BIT(13) +# define USBCFG_BVALID BIT(12) +# define USBCFG_SESEND BIT(11) + +#define INTR_DUMMY_MASK (USBSTS_SLI | USBSTS_URI | USBSTS_PCI) + +enum langwell_otg_timer_type { + TA_WAIT_VRISE_TMR, + TA_WAIT_BCON_TMR, + TA_AIDL_BDIS_TMR, + TB_ASE0_BRST_TMR, + TB_SE0_SRP_TMR, + TB_SRP_INIT_TMR, + TB_SRP_FAIL_TMR, + TB_BUS_SUSPEND_TMR +}; + +#define TA_WAIT_VRISE 100 +#define TA_WAIT_BCON 30000 +#define TA_AIDL_BDIS 15000 +#define TB_ASE0_BRST 5000 +#define TB_SE0_SRP 2 +#define TB_SRP_INIT 100 +#define TB_SRP_FAIL 5500 +#define TB_BUS_SUSPEND 500 + +struct langwell_otg_timer { + unsigned long expires; /* Number of count increase to timeout */ + unsigned long count; /* Tick counter */ + void (*function)(unsigned long); /* Timeout function */ + unsigned long data; /* Data passed to function */ + struct list_head list; +}; + +struct langwell_otg { + struct intel_mid_otg_xceiv iotg; + struct device *dev; + + void __iomem *usbcfg; /* SCCBUSB config Reg */ + + unsigned region; + unsigned cfg_region; + + struct work_struct work; + struct workqueue_struct *qwork; + struct timer_list hsm_timer; + + spinlock_t lock; + spinlock_t wq_lock; + + struct notifier_block iotg_notifier; +}; + +static inline +struct langwell_otg *mid_xceiv_to_lnw(struct intel_mid_otg_xceiv *iotg) +{ + return container_of(iotg, struct langwell_otg, iotg); +} + +#endif /* __LANGWELL_OTG_H__ */ -- cgit v1.1 From 37b5801e16d2e192fe2b20f4af33aa8c6e8786f3 Mon Sep 17 00:00:00 2001 From: Parirajan Muthalagu Date: Wed, 25 Aug 2010 16:33:26 +0530 Subject: USB Gadget: Verify VBUS current before setting the device self-powered bit Acked-by: David Brownell Acked-by: Linus Walleij Signed-off-by: Praveena Nadahally Signed-off-by: Parirajan Muthalagu Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/ch9.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'include/linux') diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h index da2ed77..b0f7e9f 100644 --- a/include/linux/usb/ch9.h +++ b/include/linux/usb/ch9.h @@ -808,4 +808,14 @@ enum usb_device_state { */ }; +/*-------------------------------------------------------------------------*/ + +/* + * As per USB compliance update, a device that is actively drawing + * more than 100mA from USB must report itself as bus-powered in + * the GetStatus(DEVICE) call. + * http://compliance.usb.org/index.asp?UpdateFile=Electrical&Format=Standard#34 + */ +#define USB_SELF_POWER_VBUS_MAX_DRAW 100 + #endif /* __LINUX_USB_CH9_H */ -- cgit v1.1 From ad1a8102f957f4d25fc58cdc10736c5ade7557e1 Mon Sep 17 00:00:00 2001 From: Michal Nazarewicz Date: Thu, 12 Aug 2010 17:43:46 +0200 Subject: USB: gadget: composite: Better string override handling The iManufatcurer, iProduct and iSerialNumber composite module parameters were only used when the gadget driver registers strings for manufacturer, product and serial number. If the gadget never bothered to set corresponding fields in USB device descriptors those module parameters are ignored. This commit makes the parameters work even if the strings ID have not been assigned. It also changes the way IDs are overridden -- what IDs are overridden is now saved in usb_composite_dev structure -- which makes it unnecessary to modify the string tables the way previous code did. The commit also adds a iProduct and iManufatcurer fields to the usb_composite_device structure. If they are set, appropriate strings are reserved and added to device descriptor. This makes it unnecessary for gadget drivers to maintain code for setting those. If iProduct is not set it defaults to usb_composite_device::name; if iManufatcurer is not set a default " with " is used. The last thing is that if needs_serial field of usb_composite_device is set and user failed to provided iSerialNumber parameter a warning is issued. Signed-off-by: Michal Nazarewicz Signed-off-by: Kyungmin Park Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/composite.h | 13 +++++++++++++ 1 file changed, 13 insertions(+) (limited to 'include/linux') diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h index 6170681..a78e813 100644 --- a/include/linux/usb/composite.h +++ b/include/linux/usb/composite.h @@ -237,10 +237,17 @@ int usb_add_config(struct usb_composite_dev *, /** * struct usb_composite_driver - groups configurations into a gadget * @name: For diagnostics, identifies the driver. + * @iProduct: Used as iProduct override if @dev->iProduct is not set. + * If NULL value of @name is taken. + * @iManufacturer: Used as iManufacturer override if @dev->iManufacturer is + * not set. If NULL a default " with " value + * will be used. * @dev: Template descriptor for the device, including default device * identifiers. * @strings: tables of strings, keyed by identifiers assigned during bind() * and language IDs provided in control requests + * @needs_serial: set to 1 if the gadget needs userspace to provide + * a serial number. If one is not provided, warning will be printed. * @bind: (REQUIRED) Used to allocate resources that are shared across the * whole device, such as string IDs, and add its configurations using * @usb_add_config(). This may fail by returning a negative errno @@ -266,8 +273,11 @@ int usb_add_config(struct usb_composite_dev *, */ struct usb_composite_driver { const char *name; + const char *iProduct; + const char *iManufacturer; const struct usb_device_descriptor *dev; struct usb_gadget_strings **strings; + unsigned needs_serial:1; /* REVISIT: bind() functions can be marked __init, which * makes trouble for section mismatch analysis. See if @@ -334,6 +344,9 @@ struct usb_composite_dev { struct list_head configs; struct usb_composite_driver *driver; u8 next_string_id; + u8 manufacturer_override; + u8 product_override; + u8 serial_override; /* the gadget driver won't enable the data pullup * while the deactivation count is nonzero. -- cgit v1.1 From b0fca50f5a94a268ed02cfddf44448051ed9343f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Thu, 12 Aug 2010 17:43:53 +0200 Subject: usb gadget: don't save bind callback in struct usb_gadget_driver MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit To accomplish this the function to register a gadget driver takes the bind function as a second argument. To make things clearer rename the function to resemble platform_driver_probe. This fixes many section mismatches like WARNING: drivers/usb/gadget/g_printer.o(.data+0xc): Section mismatch in reference from the variable printer_driver to the function .init.text:printer_bind() The variable printer_driver references the function __init printer_bind() All callers are fixed. Signed-off-by: Uwe Kleine-König [m.nazarewicz@samsung.com: added dbgp] Signed-off-by: Michał Nazarewicz Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/gadget.h | 20 ++++++++------------ 1 file changed, 8 insertions(+), 12 deletions(-) (limited to 'include/linux') diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h index d3ef42d..006412c 100644 --- a/include/linux/usb/gadget.h +++ b/include/linux/usb/gadget.h @@ -705,11 +705,6 @@ static inline int usb_gadget_disconnect(struct usb_gadget *gadget) * struct usb_gadget_driver - driver for usb 'slave' devices * @function: String describing the gadget's function * @speed: Highest speed the driver handles. - * @bind: Invoked when the driver is bound to a gadget, usually - * after registering the driver. - * At that point, ep0 is fully initialized, and ep_list holds - * the currently-available endpoints. - * Called in a context that permits sleeping. * @setup: Invoked for ep0 control requests that aren't handled by * the hardware level driver. Most calls must be handled by * the gadget driver, including descriptor and configuration @@ -774,7 +769,6 @@ static inline int usb_gadget_disconnect(struct usb_gadget *gadget) struct usb_gadget_driver { char *function; enum usb_device_speed speed; - int (*bind)(struct usb_gadget *); void (*unbind)(struct usb_gadget *); int (*setup)(struct usb_gadget *, const struct usb_ctrlrequest *); @@ -798,17 +792,19 @@ struct usb_gadget_driver { */ /** - * usb_gadget_register_driver - register a gadget driver - * @driver:the driver being registered + * usb_gadget_probe_driver - probe a gadget driver + * @driver: the driver being registered + * @bind: the driver's bind callback * Context: can sleep * * Call this in your gadget driver's module initialization function, * to tell the underlying usb controller driver about your driver. - * The driver's bind() function will be called to bind it to a - * gadget before this registration call returns. It's expected that - * the bind() functions will be in init sections. + * The @bind() function will be called to bind it to a gadget before this + * registration call returns. It's expected that the @bind() function will + * be in init sections. */ -int usb_gadget_register_driver(struct usb_gadget_driver *driver); +int usb_gadget_probe_driver(struct usb_gadget_driver *driver, + int (*bind)(struct usb_gadget *)); /** * usb_gadget_unregister_driver - unregister a gadget driver -- cgit v1.1 From 07a18bd716ed5dea336429404b132568cfaaef95 Mon Sep 17 00:00:00 2001 From: Michal Nazarewicz Date: Thu, 12 Aug 2010 17:43:54 +0200 Subject: usb gadget: don't save bind callback in struct usb_composite_driver MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The bind function is most of the time only called at init time so there is no need to save a pointer to it in the composite driver structure. This fixes many section mismatches reported by modpost. Signed-off-by: Michał Nazarewicz Acked-by: Uwe Kleine-König Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/composite.h | 19 +++++-------------- 1 file changed, 5 insertions(+), 14 deletions(-) (limited to 'include/linux') diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h index a78e813..e28b662 100644 --- a/include/linux/usb/composite.h +++ b/include/linux/usb/composite.h @@ -248,11 +248,7 @@ int usb_add_config(struct usb_composite_dev *, * and language IDs provided in control requests * @needs_serial: set to 1 if the gadget needs userspace to provide * a serial number. If one is not provided, warning will be printed. - * @bind: (REQUIRED) Used to allocate resources that are shared across the - * whole device, such as string IDs, and add its configurations using - * @usb_add_config(). This may fail by returning a negative errno - * value; it should return zero on successful initialization. - * @unbind: Reverses @bind(); called as a side effect of unregistering + * @unbind: Reverses bind; called as a side effect of unregistering * this driver. * @disconnect: optional driver disconnect method * @suspend: Notifies when the host stops sending USB traffic, @@ -263,7 +259,7 @@ int usb_add_config(struct usb_composite_dev *, * Devices default to reporting self powered operation. Devices which rely * on bus powered operation should report this in their @bind() method. * - * Before returning from @bind, various fields in the template descriptor + * Before returning from bind, various fields in the template descriptor * may be overridden. These include the idVendor/idProduct/bcdDevice values * normally to bind the appropriate host side driver, and the three strings * (iManufacturer, iProduct, iSerialNumber) normally used to provide user @@ -279,12 +275,6 @@ struct usb_composite_driver { struct usb_gadget_strings **strings; unsigned needs_serial:1; - /* REVISIT: bind() functions can be marked __init, which - * makes trouble for section mismatch analysis. See if - * we can't restructure things to avoid mismatching... - */ - - int (*bind)(struct usb_composite_dev *); int (*unbind)(struct usb_composite_dev *); void (*disconnect)(struct usb_composite_dev *); @@ -294,8 +284,9 @@ struct usb_composite_driver { void (*resume)(struct usb_composite_dev *); }; -extern int usb_composite_register(struct usb_composite_driver *); -extern void usb_composite_unregister(struct usb_composite_driver *); +extern int usb_composite_probe(struct usb_composite_driver *driver, + int (*bind)(struct usb_composite_dev *cdev)); +extern void usb_composite_unregister(struct usb_composite_driver *driver); /** -- cgit v1.1 From c9bfff9c98671ad50e4abbfe1ab606a9957f7539 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Thu, 12 Aug 2010 17:43:55 +0200 Subject: usb gadget: don't save bind callback in struct usb_configuration MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The bind function is most of the time only called at init time so there is no need to save a pointer to it in the configuration structure. This fixes many section mismatches reported by modpost. Signed-off-by: Uwe Kleine-König [m.nazarewicz@samsung.com: updated for -next] Signed-off-by: Michał Nazarewicz Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/composite.h | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) (limited to 'include/linux') diff --git a/include/linux/usb/composite.h b/include/linux/usb/composite.h index e28b662..3d29a7d 100644 --- a/include/linux/usb/composite.h +++ b/include/linux/usb/composite.h @@ -161,8 +161,6 @@ ep_choose(struct usb_gadget *g, struct usb_endpoint_descriptor *hs, * and by language IDs provided in control requests. * @descriptors: Table of descriptors preceding all function descriptors. * Examples include OTG and vendor-specific descriptors. - * @bind: Called from @usb_add_config() to allocate resources unique to this - * configuration and to call @usb_add_function() for each function used. * @unbind: Reverses @bind; called as a side effect of unregistering the * driver which added this configuration. * @setup: Used to delegate control requests that aren't handled by standard @@ -207,8 +205,7 @@ struct usb_configuration { * we can't restructure things to avoid mismatching... */ - /* configuration management: bind/unbind */ - int (*bind)(struct usb_configuration *); + /* configuration management: unbind/setup */ void (*unbind)(struct usb_configuration *); int (*setup)(struct usb_configuration *, const struct usb_ctrlrequest *); @@ -232,7 +229,8 @@ struct usb_configuration { }; int usb_add_config(struct usb_composite_dev *, - struct usb_configuration *); + struct usb_configuration *, + int (*)(struct usb_configuration *)); /** * struct usb_composite_driver - groups configurations into a gadget -- cgit v1.1 From 5ea081785dde6041eb2f4acc2369abbb9099a981 Mon Sep 17 00:00:00 2001 From: Michal Nazarewicz Date: Thu, 12 Aug 2010 17:43:56 +0200 Subject: init.h: add some more documentation to __ref* tags MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The __ref* tags may have been confusing for new kernel developers (I was confused by them for sure) so adding a few more sentences to comment to clear things up for people who see those for the first time. Signed-off-by: Michal Nazarewicz Acked-by: Uwe Kleine-König Acked-by: Sam Ravnborg Signed-off-by: Greg Kroah-Hartman --- include/linux/init.h | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) (limited to 'include/linux') diff --git a/include/linux/init.h b/include/linux/init.h index de99430..577671c 100644 --- a/include/linux/init.h +++ b/include/linux/init.h @@ -46,16 +46,23 @@ #define __exitdata __section(.exit.data) #define __exit_call __used __section(.exitcall.exit) -/* modpost check for section mismatches during the kernel build. +/* + * modpost check for section mismatches during the kernel build. * A section mismatch happens when there are references from a * code or data section to an init section (both code or data). * The init sections are (for most archs) discarded by the kernel * when early init has completed so all such references are potential bugs. * For exit sections the same issue exists. + * * The following markers are used for the cases where the reference to * the *init / *exit section (code or data) is valid and will teach - * modpost not to issue a warning. - * The markers follow same syntax rules as __init / __initdata. */ + * modpost not to issue a warning. Intended semantics is that a code or + * data tagged __ref* can reference code or data from init section without + * producing a warning (of course, no warning does not mean code is + * correct, so optimally document why the __ref is needed and why it's OK). + * + * The markers follow same syntax rules as __init / __initdata. + */ #define __ref __section(.ref.text) noinline #define __refdata __section(.ref.data) #define __refconst __section(.ref.rodata) -- cgit v1.1 From d39a0edad60dc65cf4774ee732aa7a84cf35c27a Mon Sep 17 00:00:00 2001 From: Hao Wu Date: Thu, 9 Sep 2010 22:35:39 +0100 Subject: USB OTG: Add common data structure for Intel MID Platform (Langwell/Penwell) This patch adds one new header file for the common data structure used in Intel Penwell/Langwell MID Platform OTG Transceiver drivers. After switched to the common data structure, Langwell/Penwell OTG Transceiver driver will provide an unified interface to host/client driver. Reported-by: Randy Dunlap Signed-off-by: Hao Wu Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/intel_mid_otg.h | 180 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 180 insertions(+) create mode 100644 include/linux/usb/intel_mid_otg.h (limited to 'include/linux') diff --git a/include/linux/usb/intel_mid_otg.h b/include/linux/usb/intel_mid_otg.h new file mode 100644 index 0000000..a0ccf79 --- /dev/null +++ b/include/linux/usb/intel_mid_otg.h @@ -0,0 +1,180 @@ +/* + * Intel MID (Langwell/Penwell) USB OTG Transceiver driver + * Copyright (C) 2008 - 2010, Intel Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. + * + */ + +#ifndef __INTEL_MID_OTG_H +#define __INTEL_MID_OTG_H + +#include +#include +#include + +struct intel_mid_otg_xceiv; + +/* This is a common data structure for Intel MID platform to + * save values of the OTG state machine */ +struct otg_hsm { + /* Input */ + int a_bus_resume; + int a_bus_suspend; + int a_conn; + int a_sess_vld; + int a_srp_det; + int a_vbus_vld; + int b_bus_resume; + int b_bus_suspend; + int b_conn; + int b_se0_srp; + int b_ssend_srp; + int b_sess_end; + int b_sess_vld; + int id; +/* id values */ +#define ID_B 0x05 +#define ID_A 0x04 +#define ID_ACA_C 0x03 +#define ID_ACA_B 0x02 +#define ID_ACA_A 0x01 + int power_up; + int adp_change; + int test_device; + + /* Internal variables */ + int a_set_b_hnp_en; + int b_srp_done; + int b_hnp_enable; + int hnp_poll_enable; + + /* Timeout indicator for timers */ + int a_wait_vrise_tmout; + int a_wait_bcon_tmout; + int a_aidl_bdis_tmout; + int a_bidl_adis_tmout; + int a_bidl_adis_tmr; + int a_wait_vfall_tmout; + int b_ase0_brst_tmout; + int b_bus_suspend_tmout; + int b_srp_init_tmout; + int b_srp_fail_tmout; + int b_srp_fail_tmr; + int b_adp_sense_tmout; + + /* Informative variables */ + int a_bus_drop; + int a_bus_req; + int a_clr_err; + int b_bus_req; + int a_suspend_req; + int b_bus_suspend_vld; + + /* Output */ + int drv_vbus; + int loc_conn; + int loc_sof; + + /* Others */ + int vbus_srp_up; +}; + +/* must provide ULPI access function to read/write registers implemented in + * ULPI address space */ +struct iotg_ulpi_access_ops { + int (*read)(struct intel_mid_otg_xceiv *iotg, u8 reg, u8 *val); + int (*write)(struct intel_mid_otg_xceiv *iotg, u8 reg, u8 val); +}; + +#define OTG_A_DEVICE 0x0 +#define OTG_B_DEVICE 0x1 + +/* + * the Intel MID (Langwell/Penwell) otg transceiver driver needs to interact + * with device and host drivers to implement the USB OTG related feature. More + * function members are added based on otg_transceiver data structure for this + * purpose. + */ +struct intel_mid_otg_xceiv { + struct otg_transceiver otg; + struct otg_hsm hsm; + + /* base address */ + void __iomem *base; + + /* ops to access ulpi */ + struct iotg_ulpi_access_ops ulpi_ops; + + /* atomic notifier for interrupt context */ + struct atomic_notifier_head iotg_notifier; + + /* start/stop USB Host function */ + int (*start_host)(struct intel_mid_otg_xceiv *iotg); + int (*stop_host)(struct intel_mid_otg_xceiv *iotg); + + /* start/stop USB Peripheral function */ + int (*start_peripheral)(struct intel_mid_otg_xceiv *iotg); + int (*stop_peripheral)(struct intel_mid_otg_xceiv *iotg); + + /* start/stop ADP sense/probe function */ + int (*set_adp_probe)(struct intel_mid_otg_xceiv *iotg, + bool enabled, int dev); + int (*set_adp_sense)(struct intel_mid_otg_xceiv *iotg, + bool enabled); + +#ifdef CONFIG_PM + /* suspend/resume USB host function */ + int (*suspend_host)(struct intel_mid_otg_xceiv *iotg, + pm_message_t message); + int (*resume_host)(struct intel_mid_otg_xceiv *iotg); + + int (*suspend_peripheral)(struct intel_mid_otg_xceiv *iotg, + pm_message_t message); + int (*resume_peripheral)(struct intel_mid_otg_xceiv *iotg); +#endif + +}; +static inline +struct intel_mid_otg_xceiv *otg_to_mid_xceiv(struct otg_transceiver *otg) +{ + return container_of(otg, struct intel_mid_otg_xceiv, otg); +} + +#define MID_OTG_NOTIFY_CONNECT 0x0001 +#define MID_OTG_NOTIFY_DISCONN 0x0002 +#define MID_OTG_NOTIFY_HSUSPEND 0x0003 +#define MID_OTG_NOTIFY_HRESUME 0x0004 +#define MID_OTG_NOTIFY_CSUSPEND 0x0005 +#define MID_OTG_NOTIFY_CRESUME 0x0006 +#define MID_OTG_NOTIFY_HOSTADD 0x0007 +#define MID_OTG_NOTIFY_HOSTREMOVE 0x0008 +#define MID_OTG_NOTIFY_CLIENTADD 0x0009 +#define MID_OTG_NOTIFY_CLIENTREMOVE 0x000a + +static inline int +intel_mid_otg_register_notifier(struct intel_mid_otg_xceiv *iotg, + struct notifier_block *nb) +{ + return atomic_notifier_chain_register(&iotg->iotg_notifier, nb); +} + +static inline void +intel_mid_otg_unregister_notifier(struct intel_mid_otg_xceiv *iotg, + struct notifier_block *nb) +{ + atomic_notifier_chain_unregister(&iotg->iotg_notifier, nb); +} + +#endif /* __INTEL_MID_OTG_H */ -- cgit v1.1 From 56e9406ca22968e3c9dc27d6dc0f1825e13bfff9 Mon Sep 17 00:00:00 2001 From: Hao Wu Date: Thu, 9 Sep 2010 22:35:54 +0100 Subject: USB OTG Langwell: Update OTG Kconfig and driver version. This patch updated Kconfig for langwell otg transceiver driver. Add ipc driver(INTEL_SCU_IPC) as a dependency. Driver version is updated too. Signed-off-by: Hao Wu Signed-off-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/langwell_otg.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/usb/langwell_otg.h b/include/linux/usb/langwell_otg.h index a6562f1..51f17b1 100644 --- a/include/linux/usb/langwell_otg.h +++ b/include/linux/usb/langwell_otg.h @@ -1,6 +1,6 @@ /* * Intel Langwell USB OTG transceiver driver - * Copyright (C) 2008, Intel Corporation. + * Copyright (C) 2008 - 2010, Intel Corporation. * * This program is free software; you can redistribute it and/or modify it * under the terms and conditions of the GNU General Public License, -- cgit v1.1 From 1f53c0e9bbf654ed93f63deee2bf5c9a1816966e Mon Sep 17 00:00:00 2001 From: Yauheni Kaliuta Date: Mon, 20 Sep 2010 15:40:26 +0300 Subject: USB: cdc.h: ncm: typo and style fixes Some typos were in the initial commit, make the spelling according to the spec. Add some more comments. Also change constant names according to the style of the rest of the file Signed-off-by: Yauheni Kaliuta Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/cdc.h | 22 ++++++++++++---------- 1 file changed, 12 insertions(+), 10 deletions(-) (limited to 'include/linux') diff --git a/include/linux/usb/cdc.h b/include/linux/usb/cdc.h index c117a68..583264a 100644 --- a/include/linux/usb/cdc.h +++ b/include/linux/usb/cdc.h @@ -274,13 +274,13 @@ struct usb_cdc_notification { /* * Class Specific structures and constants * - * CDC NCM parameter structure, CDC NCM subclass 6.2.1 + * CDC NCM NTB parameters structure, CDC NCM subclass 6.2.1 * */ -struct usb_cdc_ncm_ntb_parameter { +struct usb_cdc_ncm_ntb_parameters { __le16 wLength; - __le16 bmNtbFormatSupported; + __le16 bmNtbFormatsSupported; __le32 dwNtbInMaxSize; __le16 wNdpInDivisor; __le16 wNdpInPayloadRemainder; @@ -297,8 +297,8 @@ struct usb_cdc_ncm_ntb_parameter { * CDC NCM transfer headers, CDC NCM subclass 3.2 */ -#define NCM_NTH16_SIGN 0x484D434E /* NCMH */ -#define NCM_NTH32_SIGN 0x686D636E /* ncmh */ +#define USB_CDC_NCM_NTH16_SIGN 0x484D434E /* NCMH */ +#define USB_CDC_NCM_NTH32_SIGN 0x686D636E /* ncmh */ struct usb_cdc_ncm_nth16 { __le32 dwSignature; @@ -320,11 +320,12 @@ struct usb_cdc_ncm_nth32 { * CDC NCM datagram pointers, CDC NCM subclass 3.3 */ -#define NCM_NDP16_CRC_SIGN 0x314D434E /* NCM1 */ -#define NCM_NDP16_NOCRC_SIGN 0x304D434E /* NCM0 */ -#define NCM_NDP32_CRC_SIGN 0x316D636E /* ncm1 */ -#define NCM_NDP32_NOCRC_SIGN 0x306D636E /* ncm0 */ +#define USB_CDC_NCM_NDP16_CRC_SIGN 0x314D434E /* NCM1 */ +#define USB_CDC_NCM_NDP16_NOCRC_SIGN 0x304D434E /* NCM0 */ +#define USB_CDC_NCM_NDP32_CRC_SIGN 0x316D636E /* ncm1 */ +#define USB_CDC_NCM_NDP32_NOCRC_SIGN 0x306D636E /* ncm0 */ +/* 16-bit NCM Datagram Pointer Table */ struct usb_cdc_ncm_ndp16 { __le32 dwSignature; __le16 wLength; @@ -332,11 +333,12 @@ struct usb_cdc_ncm_ndp16 { __u8 data[0]; } __attribute__ ((packed)); +/* 32-bit NCM Datagram Pointer Table */ struct usb_cdc_ncm_ndp32 { __le32 dwSignature; __le16 wLength; __le16 wReserved6; - __le32 dwNextFpIndex; + __le32 dwNextNdpIndex; __le32 dwReserved12; __u8 data[0]; } __attribute__ ((packed)); -- cgit v1.1 From 7fc09170cedc329ad274433b4f1a653e603600b5 Mon Sep 17 00:00:00 2001 From: Yauheni Kaliuta Date: Mon, 20 Sep 2010 15:40:27 +0300 Subject: Revert "USB: ncm: added ncm.h with auxiliary definitions" This reverts commit 65e0b499105ec8ff3bc4ab7680873dec20127f9d. Since the host and gadget implementations are different, there is no common code for the file, remove for now. Signed-off-by: Yauheni Kaliuta Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/ncm.h | 114 ------------------------------------------------ 1 file changed, 114 deletions(-) delete mode 100644 include/linux/usb/ncm.h (limited to 'include/linux') diff --git a/include/linux/usb/ncm.h b/include/linux/usb/ncm.h deleted file mode 100644 index 006d106..0000000 --- a/include/linux/usb/ncm.h +++ /dev/null @@ -1,114 +0,0 @@ -/* - * USB CDC NCM auxiliary definitions - */ - -#ifndef __LINUX_USB_NCM_H -#define __LINUX_USB_NCM_H - -#include -#include -#include - -#define NCM_NTB_MIN_IN_SIZE 2048 -#define NCM_NTB_MIN_OUT_SIZE 2048 - -#define NCM_CONTROL_TIMEOUT (5 * 1000) - -/* bmNetworkCapabilities */ - -#define NCM_NCAP_ETH_FILTER (1 << 0) -#define NCM_NCAP_NET_ADDRESS (1 << 1) -#define NCM_NCAP_ENCAP_COMM (1 << 2) -#define NCM_NCAP_MAX_DGRAM (1 << 3) -#define NCM_NCAP_CRC_MODE (1 << 4) - -/* - * Here are options for NCM Datagram Pointer table (NDP) parser. - * There are 2 different formats: NDP16 and NDP32 in the spec (ch. 3), - * in NDP16 offsets and sizes fields are 1 16bit word wide, - * in NDP32 -- 2 16bit words wide. Also signatures are different. - * To make the parser code the same, put the differences in the structure, - * and switch pointers to the structures when the format is changed. - */ - -struct ndp_parser_opts { - u32 nth_sign; - u32 ndp_sign; - unsigned nth_size; - unsigned ndp_size; - unsigned ndplen_align; - /* sizes in u16 units */ - unsigned dgram_item_len; /* index or length */ - unsigned block_length; - unsigned fp_index; - unsigned reserved1; - unsigned reserved2; - unsigned next_fp_index; -}; - -#define INIT_NDP16_OPTS { \ - .nth_sign = NCM_NTH16_SIGN, \ - .ndp_sign = NCM_NDP16_NOCRC_SIGN, \ - .nth_size = sizeof(struct usb_cdc_ncm_nth16), \ - .ndp_size = sizeof(struct usb_cdc_ncm_ndp16), \ - .ndplen_align = 4, \ - .dgram_item_len = 1, \ - .block_length = 1, \ - .fp_index = 1, \ - .reserved1 = 0, \ - .reserved2 = 0, \ - .next_fp_index = 1, \ - } - - -#define INIT_NDP32_OPTS { \ - .nth_sign = NCM_NTH32_SIGN, \ - .ndp_sign = NCM_NDP32_NOCRC_SIGN, \ - .nth_size = sizeof(struct usb_cdc_ncm_nth32), \ - .ndp_size = sizeof(struct usb_cdc_ncm_ndp32), \ - .ndplen_align = 8, \ - .dgram_item_len = 2, \ - .block_length = 2, \ - .fp_index = 2, \ - .reserved1 = 1, \ - .reserved2 = 2, \ - .next_fp_index = 2, \ - } - -static inline void put_ncm(__le16 **p, unsigned size, unsigned val) -{ - switch (size) { - case 1: - put_unaligned_le16((u16)val, *p); - break; - case 2: - put_unaligned_le32((u32)val, *p); - - break; - default: - BUG(); - } - - *p += size; -} - -static inline unsigned get_ncm(__le16 **p, unsigned size) -{ - unsigned tmp; - - switch (size) { - case 1: - tmp = get_unaligned_le16(*p); - break; - case 2: - tmp = get_unaligned_le32(*p); - break; - default: - BUG(); - } - - *p += size; - return tmp; -} - -#endif /* __LINUX_USB_NCM_H */ -- cgit v1.1 From e5dcd531ac7a040f1b4d35f58914a36ad6174e84 Mon Sep 17 00:00:00 2001 From: Yauheni Kaliuta Date: Mon, 20 Sep 2010 15:40:28 +0300 Subject: USB: cdc.h: ncm: add missed constants and structures Make a dedicated structure for datagram pointer entry. There is no explicit declaration in the spec, but it's used by the host implementation and makes the structure more clear. Add some missed constants from the spec Signed-off-by: Yauheni Kaliuta Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/cdc.h | 57 +++++++++++++++++++++++++++++++++++++++++++++++-- 1 file changed, 55 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/usb/cdc.h b/include/linux/usb/cdc.h index 583264a..2d5b6f2 100644 --- a/include/linux/usb/cdc.h +++ b/include/linux/usb/cdc.h @@ -32,6 +32,8 @@ #define USB_CDC_PROTO_EEM 7 +#define USB_CDC_NCM_PROTO_NTB 1 + /*-------------------------------------------------------------------------*/ /* @@ -325,14 +327,26 @@ struct usb_cdc_ncm_nth32 { #define USB_CDC_NCM_NDP32_CRC_SIGN 0x316D636E /* ncm1 */ #define USB_CDC_NCM_NDP32_NOCRC_SIGN 0x306D636E /* ncm0 */ +/* 16-bit NCM Datagram Pointer Entry */ +struct usb_cdc_ncm_dpe16 { + __le16 wDatagramIndex; + __le16 wDatagramLength; +} __attribute__((__packed__)); + /* 16-bit NCM Datagram Pointer Table */ struct usb_cdc_ncm_ndp16 { __le32 dwSignature; __le16 wLength; __le16 wNextFpIndex; - __u8 data[0]; + struct usb_cdc_ncm_dpe16 dpe16[0]; } __attribute__ ((packed)); +/* 32-bit NCM Datagram Pointer Entry */ +struct usb_cdc_ncm_dpe32 { + __le32 wDatagramIndex; + __le32 wDatagramLength; +} __attribute__((__packed__)); + /* 32-bit NCM Datagram Pointer Table */ struct usb_cdc_ncm_ndp32 { __le32 dwSignature; @@ -340,7 +354,46 @@ struct usb_cdc_ncm_ndp32 { __le16 wReserved6; __le32 dwNextNdpIndex; __le32 dwReserved12; - __u8 data[0]; + struct usb_cdc_ncm_dpe32 dpe32[0]; } __attribute__ ((packed)); +/* CDC NCM subclass 3.2.1 and 3.2.2 */ +#define USB_CDC_NCM_NDP16_INDEX_MIN 0x000C +#define USB_CDC_NCM_NDP32_INDEX_MIN 0x0010 + +/* CDC NCM subclass 3.3.3 Datagram Formatting */ +#define USB_CDC_NCM_DATAGRAM_FORMAT_CRC 0x30 +#define USB_CDC_NCM_DATAGRAM_FORMAT_NOCRC 0X31 + +/* CDC NCM subclass 4.2 NCM Communications Interface Protocol Code */ +#define USB_CDC_NCM_PROTO_CODE_NO_ENCAP_COMMANDS 0x00 +#define USB_CDC_NCM_PROTO_CODE_EXTERN_PROTO 0xFE + +/* CDC NCM subclass 5.2.1 NCM Functional Descriptor, bmNetworkCapabilities */ +#define USB_CDC_NCM_NCAP_ETH_FILTER (1 << 0) +#define USB_CDC_NCM_NCAP_NET_ADDRESS (1 << 1) +#define USB_CDC_NCM_NCAP_ENCAP_COMMAND (1 << 2) +#define USB_CDC_NCM_NCAP_MAX_DATAGRAM_SIZE (1 << 3) +#define USB_CDC_NCM_NCAP_CRC_MODE (1 << 4) + +/* CDC NCM subclass Table 6-3: NTB Parameter Structure */ +#define USB_CDC_NCM_NTB16_SUPPORTED (1 << 0) +#define USB_CDC_NCM_NTB32_SUPPORTED (1 << 1) + +/* CDC NCM subclass Table 6-3: NTB Parameter Structure */ +#define USB_CDC_NCM_NDP_ALIGN_MIN_SIZE 0x04 +#define USB_CDC_NCM_NTB_MAX_LENGTH 0x1C + +/* CDC NCM subclass 6.2.5 SetNtbFormat */ +#define USB_CDC_NCM_NTB16_FORMAT 0x00 +#define USB_CDC_NCM_NTB32_FORMAT 0x01 + +/* CDC NCM subclass 6.2.7 SetNtbInputSize */ +#define USB_CDC_NCM_NTB_MIN_IN_SIZE 2048 +#define USB_CDC_NCM_NTB_MIN_OUT_SIZE 2048 + +/* CDC NCM subclass 6.2.11 SetCrcMode */ +#define USB_CDC_NCM_CRC_NOT_APPENDED 0x00 +#define USB_CDC_NCM_CRC_APPENDED 0x01 + #endif /* __LINUX_USB_CDC_H */ -- cgit v1.1 From 6195e3c6aa84dbbf80a60731168118824bd58bba Mon Sep 17 00:00:00 2001 From: Yauheni Kaliuta Date: Fri, 24 Sep 2010 09:43:27 +0300 Subject: USB: cdc.h: ncm: fix one more typo In usb_cdc_ncm_dpe32 the fields are 32 bit long and according to usb style (hungarian notation) should be called dwDatagramIndex and dwDatagramLength (see CDC NCM subclass spec, 3.3.2). Actually, they were called wDatagramIndex, wDatagramLength. Signed-off-by: Yauheni Kaliuta Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/cdc.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'include/linux') diff --git a/include/linux/usb/cdc.h b/include/linux/usb/cdc.h index 2d5b6f2..5e86dc7 100644 --- a/include/linux/usb/cdc.h +++ b/include/linux/usb/cdc.h @@ -343,8 +343,8 @@ struct usb_cdc_ncm_ndp16 { /* 32-bit NCM Datagram Pointer Entry */ struct usb_cdc_ncm_dpe32 { - __le32 wDatagramIndex; - __le32 wDatagramLength; + __le32 dwDatagramIndex; + __le32 dwDatagramLength; } __attribute__((__packed__)); /* 32-bit NCM Datagram Pointer Table */ -- cgit v1.1 From 8fa7fd74ef398370383df276ca41082ba35aafd8 Mon Sep 17 00:00:00 2001 From: Michal Nazarewicz Date: Thu, 7 Oct 2010 13:05:21 +0200 Subject: USB: storage: Use USB_ prefix instead of US_ prefix This commit changes prefix for some of the USB mass storage class related macros (ie. USB_SC_ for subclass and USB_PR_ for class). Signed-off-by: Michal Nazarewicz Cc: Alan Stern Cc: Matthew Wilcox Signed-off-by: Greg Kroah-Hartman --- include/linux/usb_usual.h | 59 ++++++++++++++++++++++++----------------------- 1 file changed, 30 insertions(+), 29 deletions(-) (limited to 'include/linux') diff --git a/include/linux/usb_usual.h b/include/linux/usb_usual.h index a4b947e..f387c43 100644 --- a/include/linux/usb_usual.h +++ b/include/linux/usb_usual.h @@ -81,35 +81,36 @@ enum { US_DO_ALL_FLAGS }; /* Sub Classes */ -#define US_SC_RBC 0x01 /* Typically, flash devices */ -#define US_SC_8020 0x02 /* CD-ROM */ -#define US_SC_QIC 0x03 /* QIC-157 Tapes */ -#define US_SC_UFI 0x04 /* Floppy */ -#define US_SC_8070 0x05 /* Removable media */ -#define US_SC_SCSI 0x06 /* Transparent */ -#define US_SC_LOCKABLE 0x07 /* Password-protected */ - -#define US_SC_ISD200 0xf0 /* ISD200 ATA */ -#define US_SC_CYP_ATACB 0xf1 /* Cypress ATACB */ -#define US_SC_DEVICE 0xff /* Use device's value */ - -/* Protocols */ - -#define US_PR_CBI 0x00 /* Control/Bulk/Interrupt */ -#define US_PR_CB 0x01 /* Control/Bulk w/o interrupt */ -#define US_PR_BULK 0x50 /* bulk only */ - -#define US_PR_USBAT 0x80 /* SCM-ATAPI bridge */ -#define US_PR_EUSB_SDDR09 0x81 /* SCM-SCSI bridge for SDDR-09 */ -#define US_PR_SDDR55 0x82 /* SDDR-55 (made up) */ -#define US_PR_DPCM_USB 0xf0 /* Combination CB/SDDR09 */ -#define US_PR_FREECOM 0xf1 /* Freecom */ -#define US_PR_DATAFAB 0xf2 /* Datafab chipsets */ -#define US_PR_JUMPSHOT 0xf3 /* Lexar Jumpshot */ -#define US_PR_ALAUDA 0xf4 /* Alauda chipsets */ -#define US_PR_KARMA 0xf5 /* Rio Karma */ - -#define US_PR_DEVICE 0xff /* Use device's value */ +#define USB_SC_RBC 0x01 /* Typically, flash devices */ +#define USB_SC_8020 0x02 /* CD-ROM */ +#define USB_SC_QIC 0x03 /* QIC-157 Tapes */ +#define USB_SC_UFI 0x04 /* Floppy */ +#define USB_SC_8070 0x05 /* Removable media */ +#define USB_SC_SCSI 0x06 /* Transparent */ +#define USB_SC_LOCKABLE 0x07 /* Password-protected */ + +#define USB_SC_ISD200 0xf0 /* ISD200 ATA */ +#define USB_SC_CYP_ATACB 0xf1 /* Cypress ATACB */ +#define USB_SC_DEVICE 0xff /* Use device's value */ + +/* Storage protocol codes */ + +#define USB_PR_CBI 0x00 /* Control/Bulk/Interrupt */ +#define USB_PR_CB 0x01 /* Control/Bulk w/o interrupt */ +#define USB_PR_BULK 0x50 /* bulk only */ +#define USB_PR_UAS 0x62 /* USB Attached SCSI */ + +#define USB_PR_USBAT 0x80 /* SCM-ATAPI bridge */ +#define USB_PR_EUSB_SDDR09 0x81 /* SCM-SCSI bridge for SDDR-09 */ +#define USB_PR_SDDR55 0x82 /* SDDR-55 (made up) */ +#define USB_PR_DPCM_USB 0xf0 /* Combination CB/SDDR09 */ +#define USB_PR_FREECOM 0xf1 /* Freecom */ +#define USB_PR_DATAFAB 0xf2 /* Datafab chipsets */ +#define USB_PR_JUMPSHOT 0xf3 /* Lexar Jumpshot */ +#define USB_PR_ALAUDA 0xf4 /* Alauda chipsets */ +#define USB_PR_KARMA 0xf5 /* Rio Karma */ + +#define USB_PR_DEVICE 0xff /* Use device's value */ /* */ -- cgit v1.1 From ae6d22fe1812ce8d40add3eb74ede9cfd2eae44f Mon Sep 17 00:00:00 2001 From: Matthew Wilcox Date: Thu, 7 Oct 2010 13:05:22 +0200 Subject: USB: Move USB Storage definitions to their own header file The libusual header file is hard to use from code that isn't part of libusual. As the comment suggests, these definitions are moved to their own header file, paralleling other USB classes. Signed-off-by: Matthew Wilcox Cc: Alan Stern [mina86@mina86.com: updated to use USB_ prefix and added #include guard] Signed-off-by: Michal Nazarewicz Signed-off-by: Greg Kroah-Hartman index 0000000..d7fc910 --- include/linux/usb/storage.h | 48 +++++++++++++++++++++++++++++++++++++++++++++ include/linux/usb_usual.h | 38 +---------------------------------- 2 files changed, 49 insertions(+), 37 deletions(-) create mode 100644 include/linux/usb/storage.h (limited to 'include/linux') diff --git a/include/linux/usb/storage.h b/include/linux/usb/storage.h new file mode 100644 index 0000000..d7fc910 --- /dev/null +++ b/include/linux/usb/storage.h @@ -0,0 +1,48 @@ +#ifndef __LINUX_USB_STORAGE_H +#define __LINUX_USB_STORAGE_H + +/* + * linux/usb/storage.h + * + * Copyright Matthew Wilcox for Intel Corp, 2010 + * + * This file contains definitions taken from the + * USB Mass Storage Class Specification Overview + * + * Distributed under the terms of the GNU GPL, version two. + */ + +/* Storage subclass codes */ + +#define USB_SC_RBC 0x01 /* Typically, flash devices */ +#define USB_SC_8020 0x02 /* CD-ROM */ +#define USB_SC_QIC 0x03 /* QIC-157 Tapes */ +#define USB_SC_UFI 0x04 /* Floppy */ +#define USB_SC_8070 0x05 /* Removable media */ +#define USB_SC_SCSI 0x06 /* Transparent */ +#define USB_SC_LOCKABLE 0x07 /* Password-protected */ + +#define USB_SC_ISD200 0xf0 /* ISD200 ATA */ +#define USB_SC_CYP_ATACB 0xf1 /* Cypress ATACB */ +#define USB_SC_DEVICE 0xff /* Use device's value */ + +/* Storage protocol codes */ + +#define USB_PR_CBI 0x00 /* Control/Bulk/Interrupt */ +#define USB_PR_CB 0x01 /* Control/Bulk w/o interrupt */ +#define USB_PR_BULK 0x50 /* bulk only */ +#define USB_PR_UAS 0x62 /* USB Attached SCSI */ + +#define USB_PR_USBAT 0x80 /* SCM-ATAPI bridge */ +#define USB_PR_EUSB_SDDR09 0x81 /* SCM-SCSI bridge for SDDR-09 */ +#define USB_PR_SDDR55 0x82 /* SDDR-55 (made up) */ +#define USB_PR_DPCM_USB 0xf0 /* Combination CB/SDDR09 */ +#define USB_PR_FREECOM 0xf1 /* Freecom */ +#define USB_PR_DATAFAB 0xf2 /* Datafab chipsets */ +#define USB_PR_JUMPSHOT 0xf3 /* Lexar Jumpshot */ +#define USB_PR_ALAUDA 0xf4 /* Alauda chipsets */ +#define USB_PR_KARMA 0xf5 /* Rio Karma */ + +#define USB_PR_DEVICE 0xff /* Use device's value */ + +#endif diff --git a/include/linux/usb_usual.h b/include/linux/usb_usual.h index f387c43..f091dc6 100644 --- a/include/linux/usb_usual.h +++ b/include/linux/usb_usual.h @@ -74,43 +74,7 @@ enum { US_DO_ALL_FLAGS }; #define USB_US_TYPE(flags) (((flags) >> 24) & 0xFF) #define USB_US_ORIG_FLAGS(flags) ((flags) & 0x00FFFFFF) -/* - * This is probably not the best place to keep these constants, conceptually. - * But it's the only header included into all places which need them. - */ - -/* Sub Classes */ - -#define USB_SC_RBC 0x01 /* Typically, flash devices */ -#define USB_SC_8020 0x02 /* CD-ROM */ -#define USB_SC_QIC 0x03 /* QIC-157 Tapes */ -#define USB_SC_UFI 0x04 /* Floppy */ -#define USB_SC_8070 0x05 /* Removable media */ -#define USB_SC_SCSI 0x06 /* Transparent */ -#define USB_SC_LOCKABLE 0x07 /* Password-protected */ - -#define USB_SC_ISD200 0xf0 /* ISD200 ATA */ -#define USB_SC_CYP_ATACB 0xf1 /* Cypress ATACB */ -#define USB_SC_DEVICE 0xff /* Use device's value */ - -/* Storage protocol codes */ - -#define USB_PR_CBI 0x00 /* Control/Bulk/Interrupt */ -#define USB_PR_CB 0x01 /* Control/Bulk w/o interrupt */ -#define USB_PR_BULK 0x50 /* bulk only */ -#define USB_PR_UAS 0x62 /* USB Attached SCSI */ - -#define USB_PR_USBAT 0x80 /* SCM-ATAPI bridge */ -#define USB_PR_EUSB_SDDR09 0x81 /* SCM-SCSI bridge for SDDR-09 */ -#define USB_PR_SDDR55 0x82 /* SDDR-55 (made up) */ -#define USB_PR_DPCM_USB 0xf0 /* Combination CB/SDDR09 */ -#define USB_PR_FREECOM 0xf1 /* Freecom */ -#define USB_PR_DATAFAB 0xf2 /* Datafab chipsets */ -#define USB_PR_JUMPSHOT 0xf3 /* Lexar Jumpshot */ -#define USB_PR_ALAUDA 0xf4 /* Alauda chipsets */ -#define USB_PR_KARMA 0xf5 /* Rio Karma */ - -#define USB_PR_DEVICE 0xff /* Use device's value */ +#include /* */ -- cgit v1.1 From 496dda704bca1208e08773ba39b29a69536f5381 Mon Sep 17 00:00:00 2001 From: Maulik Mankad Date: Fri, 24 Sep 2010 13:44:06 +0300 Subject: usb: musb: host: unmap the buffer for PIO data transfers The USB stack maps the buffer for DMA if the controller supports DMA. MUSB controller can perform DMA as well as PIO transfers. The buffer needs to be unmapped before CPU can perform PIO data transfers. Export unmap_urb_for_dma() so that drivers can perform the DMA unmapping in a sane way. Signed-off-by: Maulik Mankad Acked-by: Alan Stern Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/hcd.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index 3b571f1..fe89f7c 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -329,6 +329,7 @@ extern int usb_hcd_submit_urb(struct urb *urb, gfp_t mem_flags); extern int usb_hcd_unlink_urb(struct urb *urb, int status); extern void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb, int status); +extern void unmap_urb_for_dma(struct usb_hcd *, struct urb *); extern void usb_hcd_flush_endpoint(struct usb_device *udev, struct usb_host_endpoint *ep); extern void usb_hcd_disable_endpoint(struct usb_device *udev, -- cgit v1.1 From 748eee0986f0d51c7bc39f194d515a8d8248ebdd Mon Sep 17 00:00:00 2001 From: Grazvydas Ignotas Date: Mon, 27 Sep 2010 15:17:18 +0300 Subject: USB: Add more empty functions in otg.h Add empty functions for get/put transceiver functions too, so that drivers that optionally use them can call them without worrying that they might not exist, eliminating ifdefs. Signed-off-by: Grazvydas Ignotas Acked-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/otg.h | 11 +++++++++++ 1 file changed, 11 insertions(+) (limited to 'include/linux') diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h index 545cba7..0a5b371 100644 --- a/include/linux/usb/otg.h +++ b/include/linux/usb/otg.h @@ -164,8 +164,19 @@ otg_shutdown(struct otg_transceiver *otg) } /* for usb host and peripheral controller drivers */ +#ifdef CONFIG_USB_OTG_UTILS extern struct otg_transceiver *otg_get_transceiver(void); extern void otg_put_transceiver(struct otg_transceiver *); +#else +static inline struct otg_transceiver *otg_get_transceiver(void) +{ + return NULL; +} + +static inline void otg_put_transceiver(struct otg_transceiver *x) +{ +} +#endif /* Context: can sleep */ static inline int -- cgit v1.1 From 230f7ede6c2f0e403f29e03e0251a470aa9350dd Mon Sep 17 00:00:00 2001 From: Anatolij Gustschin Date: Tue, 28 Sep 2010 20:55:21 +0200 Subject: USB: add USB EHCI support for MPC5121 SoC Extends FSL EHCI platform driver glue layer to support MPC5121 USB controllers. MPC5121 Rev 2.0 silicon EHCI registers are in big endian format. The appropriate flags are set using the information in the platform data structure. MPC83xx system interface registers are not available on MPC512x, so the access to these registers is isolated in MPC512x case. Furthermore the USB controller clocks must be enabled before 512x register accesses which is done by providing platform specific init callback. The MPC512x internal USB PHY doesn't provide supply voltage. For boards using different power switches allow specifying DRVVBUS and PWR_FAULT signal polarity of the MPC5121 internal PHY using "fsl,invert-drvvbus" and "fsl,invert-pwr-fault" properties in the device tree USB nodes. Adds documentation for this new device tree bindings. Signed-off-by: Anatolij Gustschin Cc: Grant Likely Signed-off-by: Greg Kroah-Hartman --- include/linux/fsl_devices.h | 15 +++++++++++++++ 1 file changed, 15 insertions(+) (limited to 'include/linux') diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h index 28e33fe..d5f9a74 100644 --- a/include/linux/fsl_devices.h +++ b/include/linux/fsl_devices.h @@ -58,11 +58,26 @@ enum fsl_usb2_phy_modes { FSL_USB2_PHY_SERIAL, }; +struct clk; +struct platform_device; + struct fsl_usb2_platform_data { /* board specific information */ enum fsl_usb2_operating_modes operating_mode; enum fsl_usb2_phy_modes phy_mode; unsigned int port_enables; + + int (*init)(struct platform_device *); + void (*exit)(struct platform_device *); + void __iomem *regs; /* ioremap'd register base */ + struct clk *clk; + unsigned big_endian_mmio:1; + unsigned big_endian_desc:1; + unsigned es:1; /* need USBMODE:ES */ + unsigned le_setup_buf:1; + unsigned have_sysif_regs:1; + unsigned invert_drvvbus:1; + unsigned invert_pwr_fault:1; }; /* Flags in fsl_usb2_mph_platform_data */ -- cgit v1.1 From 1dae423dd9b247b048eda00cb598c755e5933213 Mon Sep 17 00:00:00 2001 From: Martin Fuzzey Date: Fri, 1 Oct 2010 00:21:55 +0200 Subject: USB: introduce unmap_urb_setup_for_dma() Split unmap_urb_for_dma() to allow just the setup buffer to be unmapped. This allows HCDs to use PIO for the setup buffer if it is not suitable for DMA. Signed-off-by: Martin Fuzzey Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/hcd.h | 1 + 1 file changed, 1 insertion(+) (limited to 'include/linux') diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index fe89f7c..0b6e751 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -329,6 +329,7 @@ extern int usb_hcd_submit_urb(struct urb *urb, gfp_t mem_flags); extern int usb_hcd_unlink_urb(struct urb *urb, int status); extern void usb_hcd_giveback_urb(struct usb_hcd *hcd, struct urb *urb, int status); +extern void unmap_urb_setup_for_dma(struct usb_hcd *, struct urb *); extern void unmap_urb_for_dma(struct usb_hcd *, struct urb *); extern void usb_hcd_flush_endpoint(struct usb_device *udev, struct usb_host_endpoint *ep); -- cgit v1.1 From ae38c78a03e1b77ad45248fcf097e4568e740209 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 1 Oct 2010 14:20:10 -0700 Subject: usb-storage: add new no_read_disc_info quirk Appotech ax3003 (the larger brother of the ax203) based devices are even more buggy then the ax203. They will go of into lala land when ever they see a READ_DISC_INFO scsi command. So add a new US_FL which tells the scsi sr driver to not issue any READ_DISC_INFO scsi commands. [akpm@linux-foundation.org: fix build] Signed-off-by: Hans de Goede Cc: James Bottomley Cc: Alan Stern Cc: Matthew Dharm Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- include/linux/usb_usual.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/usb_usual.h b/include/linux/usb_usual.h index f091dc6..e62e9fe 100644 --- a/include/linux/usb_usual.h +++ b/include/linux/usb_usual.h @@ -58,7 +58,9 @@ US_FLAG(CAPACITY_OK, 0x00010000) \ /* READ CAPACITY response is correct */ \ US_FLAG(BAD_SENSE, 0x00020000) \ - /* Bad Sense (never more than 18 bytes) */ + /* Bad Sense (never more than 18 bytes) */ \ + US_FLAG(NO_READ_DISC_INFO, 0x00040000) \ + /* cannot handle READ_DISC_INFO */ #define US_FLAG(name, value) US_FL_##name = value , enum { US_DO_ALL_FLAGS }; -- cgit v1.1 From 00914025cc4e783d4703b4db1d47b41f389e50c8 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 1 Oct 2010 14:20:11 -0700 Subject: usb-storage: add new no_read_capacity_16 quirk Some Rockbox based mp4 players will crash when ever they see a read_capacity_16 scsi command. So add a new US_FL which tells the scsi sd driver to not issue any read_capacity_16 scsi commands. Signed-off-by: Hans de Goede Cc: James Bottomley Cc: Alan Stern Cc: Matthew Dharm Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- include/linux/usb_usual.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/usb_usual.h b/include/linux/usb_usual.h index e62e9fe..71693d4 100644 --- a/include/linux/usb_usual.h +++ b/include/linux/usb_usual.h @@ -60,7 +60,9 @@ US_FLAG(BAD_SENSE, 0x00020000) \ /* Bad Sense (never more than 18 bytes) */ \ US_FLAG(NO_READ_DISC_INFO, 0x00040000) \ - /* cannot handle READ_DISC_INFO */ + /* cannot handle READ_DISC_INFO */ \ + US_FLAG(NO_READ_CAPACITY_16, 0x00080000) \ + /* cannot handle READ_CAPACITY_16 */ #define US_FLAG(name, value) US_FL_##name = value , enum { US_DO_ALL_FLAGS }; -- cgit v1.1 From 562e7c71c6708353bfe7b615576bcbcf7afd522e Mon Sep 17 00:00:00 2001 From: Tatyana Brokhman Date: Sat, 9 Oct 2010 16:46:12 +0200 Subject: usb: usb3.0 ch9 definitions Adding SuperSpeed usb definitions as defined by ch9 of the USB3.0 spec. This patch is a preparation for adding SuperSpeed support to the gadget framework. Signed-off-by: Tatyana Brokhman Signed-off-by: Greg Kroah-Hartman --- include/linux/usb/ch9.h | 58 ++++++++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 57 insertions(+), 1 deletion(-) (limited to 'include/linux') diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h index b0f7e9f..f917bbb 100644 --- a/include/linux/usb/ch9.h +++ b/include/linux/usb/ch9.h @@ -123,8 +123,23 @@ #define USB_DEVICE_A_ALT_HNP_SUPPORT 5 /* (otg) other RH port does */ #define USB_DEVICE_DEBUG_MODE 6 /* (special devices only) */ +/* + * New Feature Selectors as added by USB 3.0 + * See USB 3.0 spec Table 9-6 + */ +#define USB_DEVICE_U1_ENABLE 48 /* dev may initiate U1 transition */ +#define USB_DEVICE_U2_ENABLE 49 /* dev may initiate U2 transition */ +#define USB_DEVICE_LTM_ENABLE 50 /* dev may send LTM */ +#define USB_INTRF_FUNC_SUSPEND 0 /* function suspend */ + +#define USB_INTR_FUNC_SUSPEND_OPT_MASK 0xFF00 + #define USB_ENDPOINT_HALT 0 /* IN/OUT will STALL */ +/* Bit array elements as returned by the USB_REQ_GET_STATUS request. */ +#define USB_DEV_STAT_U1_ENABLED 2 /* transition into U1 state */ +#define USB_DEV_STAT_U2_ENABLED 3 /* transition into U2 state */ +#define USB_DEV_STAT_LTM_ENABLED 4 /* Latency tolerance messages */ /** * struct usb_ctrlrequest - SETUP data for a USB device control request @@ -675,6 +690,7 @@ struct usb_bos_descriptor { __u8 bNumDeviceCaps; } __attribute__((packed)); +#define USB_DT_BOS_SIZE 5 /*-------------------------------------------------------------------------*/ /* USB_DT_DEVICE_CAPABILITY: grouped with BOS */ @@ -712,16 +728,56 @@ struct usb_wireless_cap_descriptor { /* Ultra Wide Band */ __u8 bReserved; } __attribute__((packed)); +/* USB 2.0 Extension descriptor */ #define USB_CAP_TYPE_EXT 2 struct usb_ext_cap_descriptor { /* Link Power Management */ __u8 bLength; __u8 bDescriptorType; __u8 bDevCapabilityType; - __u8 bmAttributes; + __le32 bmAttributes; #define USB_LPM_SUPPORT (1 << 1) /* supports LPM */ } __attribute__((packed)); +#define USB_DT_USB_EXT_CAP_SIZE 7 + +/* + * SuperSpeed USB Capability descriptor: Defines the set of SuperSpeed USB + * specific device level capabilities + */ +#define USB_SS_CAP_TYPE 3 +struct usb_ss_cap_descriptor { /* Link Power Management */ + __u8 bLength; + __u8 bDescriptorType; + __u8 bDevCapabilityType; + __u8 bmAttributes; +#define USB_LTM_SUPPORT (1 << 1) /* supports LTM */ + __le16 wSpeedSupported; +#define USB_LOW_SPEED_OPERATION (1) /* Low speed operation */ +#define USB_FULL_SPEED_OPERATION (1 << 1) /* Full speed operation */ +#define USB_HIGH_SPEED_OPERATION (1 << 2) /* High speed operation */ +#define USB_5GBPS_OPERATION (1 << 3) /* Operation at 5Gbps */ + __u8 bFunctionalitySupport; + __u8 bU1devExitLat; + __le16 bU2DevExitLat; +} __attribute__((packed)); + +#define USB_DT_USB_SS_CAP_SIZE 10 + +/* + * Container ID Capability descriptor: Defines the instance unique ID used to + * identify the instance across all operating modes + */ +#define CONTAINER_ID_TYPE 4 +struct usb_ss_container_id_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDevCapabilityType; + __u8 bReserved; + __u8 ContainerID[16]; /* 128-bit number */ +} __attribute__((packed)); + +#define USB_DT_USB_SS_CONTN_ID_SIZE 20 /*-------------------------------------------------------------------------*/ /* USB_DT_WIRELESS_ENDPOINT_COMP: companion descriptor associated with -- cgit v1.1 From 69cb1ec4ce4da4bc4c07bb09c4c98b3e25d99fb1 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Eric=20B=C3=A9nard?= Date: Fri, 15 Oct 2010 14:30:58 +0200 Subject: mxc_udc: add workaround for ENGcm09152 for i.MX35 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit this patch gives the possibility to workaround bug ENGcm09152 on i.MX35 when the hardware workaround is also implemented on the board. It covers the workaround described on page 25 of the following Errata : http://cache.freescale.com/files/dsp/doc/errata/IMX35CE.pdf Signed-off-by: Eric Bénard Signed-off-by: Greg Kroah-Hartman --- include/linux/fsl_devices.h | 3 +++ 1 file changed, 3 insertions(+) (limited to 'include/linux') diff --git a/include/linux/fsl_devices.h b/include/linux/fsl_devices.h index d5f9a74..4eb56ed 100644 --- a/include/linux/fsl_devices.h +++ b/include/linux/fsl_devices.h @@ -66,6 +66,7 @@ struct fsl_usb2_platform_data { enum fsl_usb2_operating_modes operating_mode; enum fsl_usb2_phy_modes phy_mode; unsigned int port_enables; + unsigned int workaround; int (*init)(struct platform_device *); void (*exit)(struct platform_device *); @@ -84,6 +85,8 @@ struct fsl_usb2_platform_data { #define FSL_USB2_PORT0_ENABLED 0x00000001 #define FSL_USB2_PORT1_ENABLED 0x00000002 +#define FLS_USB2_WORKAROUND_ENGCM09152 (1 << 0) + struct spi_device; struct fsl_spi_platform_data { -- cgit v1.1