From 4367cfdc7c657ad8a797f51b9ffd3c64b31910e7 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 26 Feb 2009 11:48:36 -0800 Subject: regulator: enumerate voltages (v2) Add a basic mechanism for regulators to report the discrete voltages they support: list_voltage() enumerates them using selectors numbered from 0 to an upper bound. Use those methods to force machine-level constraints into bounds. (Example: regulator supports 1.8V, 2.4V, 2.6V, 3.3V, and board constraints for that rail are 2.0V to 3.6V ... so the range of voltages is then 2.4V to 3.3V on this board.) Export those voltages to the regulator consumer interface, so for example regulator hooked up to an MMC/SD/SDIO slot can report the actual voltage options available to cards connected there. Signed-off-by: David Brownell Acked-by: Mark Brown Signed-off-by: Liam Girdwood --- include/linux/regulator/consumer.h | 2 ++ 1 file changed, 2 insertions(+) (limited to 'include/linux/regulator/consumer.h') diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h index df6c4bc..277f4b9 100644 --- a/include/linux/regulator/consumer.h +++ b/include/linux/regulator/consumer.h @@ -142,6 +142,8 @@ int regulator_bulk_disable(int num_consumers, void regulator_bulk_free(int num_consumers, struct regulator_bulk_data *consumers); +int regulator_count_voltages(struct regulator *regulator); +int regulator_list_voltage(struct regulator *regulator, unsigned selector); int regulator_set_voltage(struct regulator *regulator, int min_uV, int max_uV); int regulator_get_voltage(struct regulator *regulator); int regulator_set_current_limit(struct regulator *regulator, -- cgit v1.1