From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- include/linux/mtd/blktrans.h | 72 +++++++ include/linux/mtd/cfi.h | 394 ++++++++++++++++++++++++++++++++++ include/linux/mtd/cfi_endian.h | 57 +++++ include/linux/mtd/compatmac.h | 10 + include/linux/mtd/concat.h | 23 ++ include/linux/mtd/doc2000.h | 195 +++++++++++++++++ include/linux/mtd/flashchip.h | 89 ++++++++ include/linux/mtd/ftl.h | 76 +++++++ include/linux/mtd/gen_probe.h | 23 ++ include/linux/mtd/iflash.h | 98 +++++++++ include/linux/mtd/inftl.h | 57 +++++ include/linux/mtd/jedec.h | 66 ++++++ include/linux/mtd/map.h | 412 ++++++++++++++++++++++++++++++++++++ include/linux/mtd/mtd.h | 226 ++++++++++++++++++++ include/linux/mtd/nand.h | 469 +++++++++++++++++++++++++++++++++++++++++ include/linux/mtd/nand_ecc.h | 30 +++ include/linux/mtd/nftl.h | 54 +++++ include/linux/mtd/partitions.h | 75 +++++++ include/linux/mtd/physmap.h | 61 ++++++ include/linux/mtd/pmc551.h | 79 +++++++ include/linux/mtd/xip.h | 107 ++++++++++ 21 files changed, 2673 insertions(+) create mode 100644 include/linux/mtd/blktrans.h create mode 100644 include/linux/mtd/cfi.h create mode 100644 include/linux/mtd/cfi_endian.h create mode 100644 include/linux/mtd/compatmac.h create mode 100644 include/linux/mtd/concat.h create mode 100644 include/linux/mtd/doc2000.h create mode 100644 include/linux/mtd/flashchip.h create mode 100644 include/linux/mtd/ftl.h create mode 100644 include/linux/mtd/gen_probe.h create mode 100644 include/linux/mtd/iflash.h create mode 100644 include/linux/mtd/inftl.h create mode 100644 include/linux/mtd/jedec.h create mode 100644 include/linux/mtd/map.h create mode 100644 include/linux/mtd/mtd.h create mode 100644 include/linux/mtd/nand.h create mode 100644 include/linux/mtd/nand_ecc.h create mode 100644 include/linux/mtd/nftl.h create mode 100644 include/linux/mtd/partitions.h create mode 100644 include/linux/mtd/physmap.h create mode 100644 include/linux/mtd/pmc551.h create mode 100644 include/linux/mtd/xip.h (limited to 'include/linux/mtd') diff --git a/include/linux/mtd/blktrans.h b/include/linux/mtd/blktrans.h new file mode 100644 index 0000000..4ebc2e5 --- /dev/null +++ b/include/linux/mtd/blktrans.h @@ -0,0 +1,72 @@ +/* + * $Id: blktrans.h,v 1.5 2003/06/23 12:00:08 dwmw2 Exp $ + * + * (C) 2003 David Woodhouse + * + * Interface to Linux block layer for MTD 'translation layers'. + * + */ + +#ifndef __MTD_TRANS_H__ +#define __MTD_TRANS_H__ + +#include + +struct hd_geometry; +struct mtd_info; +struct mtd_blktrans_ops; +struct file; +struct inode; + +struct mtd_blktrans_dev { + struct mtd_blktrans_ops *tr; + struct list_head list; + struct mtd_info *mtd; + struct semaphore sem; + int devnum; + int blksize; + unsigned long size; + int readonly; + void *blkcore_priv; /* gendisk in 2.5, devfs_handle in 2.4 */ +}; + +struct blkcore_priv; /* Differs for 2.4 and 2.5 kernels; private */ + +struct mtd_blktrans_ops { + char *name; + int major; + int part_bits; + + /* Access functions */ + int (*readsect)(struct mtd_blktrans_dev *dev, + unsigned long block, char *buffer); + int (*writesect)(struct mtd_blktrans_dev *dev, + unsigned long block, char *buffer); + + /* Block layer ioctls */ + int (*getgeo)(struct mtd_blktrans_dev *dev, struct hd_geometry *geo); + int (*flush)(struct mtd_blktrans_dev *dev); + + /* Called with mtd_table_mutex held; no race with add/remove */ + int (*open)(struct mtd_blktrans_dev *dev); + int (*release)(struct mtd_blktrans_dev *dev); + + /* Called on {de,}registration and on subsequent addition/removal + of devices, with mtd_table_mutex held. */ + void (*add_mtd)(struct mtd_blktrans_ops *tr, struct mtd_info *mtd); + void (*remove_dev)(struct mtd_blktrans_dev *dev); + + struct list_head devs; + struct list_head list; + struct module *owner; + + struct mtd_blkcore_priv *blkcore_priv; +}; + +extern int register_mtd_blktrans(struct mtd_blktrans_ops *tr); +extern int deregister_mtd_blktrans(struct mtd_blktrans_ops *tr); +extern int add_mtd_blktrans_dev(struct mtd_blktrans_dev *dev); +extern int del_mtd_blktrans_dev(struct mtd_blktrans_dev *dev); + + +#endif /* __MTD_TRANS_H__ */ diff --git a/include/linux/mtd/cfi.h b/include/linux/mtd/cfi.h new file mode 100644 index 0000000..2ed8c58 --- /dev/null +++ b/include/linux/mtd/cfi.h @@ -0,0 +1,394 @@ + +/* Common Flash Interface structures + * See http://support.intel.com/design/flash/technote/index.htm + * $Id: cfi.h,v 1.50 2004/11/20 12:46:51 dwmw2 Exp $ + */ + +#ifndef __MTD_CFI_H__ +#define __MTD_CFI_H__ + +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_MTD_CFI_I1 +#define cfi_interleave(cfi) 1 +#define cfi_interleave_is_1(cfi) (cfi_interleave(cfi) == 1) +#else +#define cfi_interleave_is_1(cfi) (0) +#endif + +#ifdef CONFIG_MTD_CFI_I2 +# ifdef cfi_interleave +# undef cfi_interleave +# define cfi_interleave(cfi) ((cfi)->interleave) +# else +# define cfi_interleave(cfi) 2 +# endif +#define cfi_interleave_is_2(cfi) (cfi_interleave(cfi) == 2) +#else +#define cfi_interleave_is_2(cfi) (0) +#endif + +#ifdef CONFIG_MTD_CFI_I4 +# ifdef cfi_interleave +# undef cfi_interleave +# define cfi_interleave(cfi) ((cfi)->interleave) +# else +# define cfi_interleave(cfi) 4 +# endif +#define cfi_interleave_is_4(cfi) (cfi_interleave(cfi) == 4) +#else +#define cfi_interleave_is_4(cfi) (0) +#endif + +#ifdef CONFIG_MTD_CFI_I8 +# ifdef cfi_interleave +# undef cfi_interleave +# define cfi_interleave(cfi) ((cfi)->interleave) +# else +# define cfi_interleave(cfi) 8 +# endif +#define cfi_interleave_is_8(cfi) (cfi_interleave(cfi) == 8) +#else +#define cfi_interleave_is_8(cfi) (0) +#endif + +static inline int cfi_interleave_supported(int i) +{ + switch (i) { +#ifdef CONFIG_MTD_CFI_I1 + case 1: +#endif +#ifdef CONFIG_MTD_CFI_I2 + case 2: +#endif +#ifdef CONFIG_MTD_CFI_I4 + case 4: +#endif +#ifdef CONFIG_MTD_CFI_I8 + case 8: +#endif + return 1; + + default: + return 0; + } +} + + +/* NB: these values must represents the number of bytes needed to meet the + * device type (x8, x16, x32). Eg. a 32 bit device is 4 x 8 bytes. + * These numbers are used in calculations. + */ +#define CFI_DEVICETYPE_X8 (8 / 8) +#define CFI_DEVICETYPE_X16 (16 / 8) +#define CFI_DEVICETYPE_X32 (32 / 8) +#define CFI_DEVICETYPE_X64 (64 / 8) + +/* NB: We keep these structures in memory in HOST byteorder, except + * where individually noted. + */ + +/* Basic Query Structure */ +struct cfi_ident { + uint8_t qry[3]; + uint16_t P_ID; + uint16_t P_ADR; + uint16_t A_ID; + uint16_t A_ADR; + uint8_t VccMin; + uint8_t VccMax; + uint8_t VppMin; + uint8_t VppMax; + uint8_t WordWriteTimeoutTyp; + uint8_t BufWriteTimeoutTyp; + uint8_t BlockEraseTimeoutTyp; + uint8_t ChipEraseTimeoutTyp; + uint8_t WordWriteTimeoutMax; + uint8_t BufWriteTimeoutMax; + uint8_t BlockEraseTimeoutMax; + uint8_t ChipEraseTimeoutMax; + uint8_t DevSize; + uint16_t InterfaceDesc; + uint16_t MaxBufWriteSize; + uint8_t NumEraseRegions; + uint32_t EraseRegionInfo[0]; /* Not host ordered */ +} __attribute__((packed)); + +/* Extended Query Structure for both PRI and ALT */ + +struct cfi_extquery { + uint8_t pri[3]; + uint8_t MajorVersion; + uint8_t MinorVersion; +} __attribute__((packed)); + +/* Vendor-Specific PRI for Intel/Sharp Extended Command Set (0x0001) */ + +struct cfi_pri_intelext { + uint8_t pri[3]; + uint8_t MajorVersion; + uint8_t MinorVersion; + uint32_t FeatureSupport; /* if bit 31 is set then an additional uint32_t feature + block follows - FIXME - not currently supported */ + uint8_t SuspendCmdSupport; + uint16_t BlkStatusRegMask; + uint8_t VccOptimal; + uint8_t VppOptimal; + uint8_t NumProtectionFields; + uint16_t ProtRegAddr; + uint8_t FactProtRegSize; + uint8_t UserProtRegSize; + uint8_t extra[0]; +} __attribute__((packed)); + +struct cfi_intelext_blockinfo { + uint16_t NumIdentBlocks; + uint16_t BlockSize; + uint16_t MinBlockEraseCycles; + uint8_t BitsPerCell; + uint8_t BlockCap; +} __attribute__((packed)); + +struct cfi_intelext_regioninfo { + uint16_t NumIdentPartitions; + uint8_t NumOpAllowed; + uint8_t NumOpAllowedSimProgMode; + uint8_t NumOpAllowedSimEraMode; + uint8_t NumBlockTypes; + struct cfi_intelext_blockinfo BlockTypes[1]; +} __attribute__((packed)); + +/* Vendor-Specific PRI for AMD/Fujitsu Extended Command Set (0x0002) */ + +struct cfi_pri_amdstd { + uint8_t pri[3]; + uint8_t MajorVersion; + uint8_t MinorVersion; + uint8_t SiliconRevision; /* bits 1-0: Address Sensitive Unlock */ + uint8_t EraseSuspend; + uint8_t BlkProt; + uint8_t TmpBlkUnprotect; + uint8_t BlkProtUnprot; + uint8_t SimultaneousOps; + uint8_t BurstMode; + uint8_t PageMode; + uint8_t VppMin; + uint8_t VppMax; + uint8_t TopBottom; +} __attribute__((packed)); + +struct cfi_pri_query { + uint8_t NumFields; + uint32_t ProtField[1]; /* Not host ordered */ +} __attribute__((packed)); + +struct cfi_bri_query { + uint8_t PageModeReadCap; + uint8_t NumFields; + uint32_t ConfField[1]; /* Not host ordered */ +} __attribute__((packed)); + +#define P_ID_NONE 0x0000 +#define P_ID_INTEL_EXT 0x0001 +#define P_ID_AMD_STD 0x0002 +#define P_ID_INTEL_STD 0x0003 +#define P_ID_AMD_EXT 0x0004 +#define P_ID_WINBOND 0x0006 +#define P_ID_ST_ADV 0x0020 +#define P_ID_MITSUBISHI_STD 0x0100 +#define P_ID_MITSUBISHI_EXT 0x0101 +#define P_ID_SST_PAGE 0x0102 +#define P_ID_INTEL_PERFORMANCE 0x0200 +#define P_ID_INTEL_DATA 0x0210 +#define P_ID_RESERVED 0xffff + + +#define CFI_MODE_CFI 1 +#define CFI_MODE_JEDEC 0 + +struct cfi_private { + uint16_t cmdset; + void *cmdset_priv; + int interleave; + int device_type; + int cfi_mode; /* Are we a JEDEC device pretending to be CFI? */ + int addr_unlock1; + int addr_unlock2; + struct mtd_info *(*cmdset_setup)(struct map_info *); + struct cfi_ident *cfiq; /* For now only one. We insist that all devs + must be of the same type. */ + int mfr, id; + int numchips; + unsigned long chipshift; /* Because they're of the same type */ + const char *im_name; /* inter_module name for cmdset_setup */ + struct flchip chips[0]; /* per-chip data structure for each chip */ +}; + +/* + * Returns the command address according to the given geometry. + */ +static inline uint32_t cfi_build_cmd_addr(uint32_t cmd_ofs, int interleave, int type) +{ + return (cmd_ofs * type) * interleave; +} + +/* + * Transforms the CFI command for the given geometry (bus width & interleave). + * It looks too long to be inline, but in the common case it should almost all + * get optimised away. + */ +static inline map_word cfi_build_cmd(u_char cmd, struct map_info *map, struct cfi_private *cfi) +{ + map_word val = { {0} }; + int wordwidth, words_per_bus, chip_mode, chips_per_word; + unsigned long onecmd; + int i; + + /* We do it this way to give the compiler a fighting chance + of optimising away all the crap for 'bankwidth' larger than + an unsigned long, in the common case where that support is + disabled */ + if (map_bankwidth_is_large(map)) { + wordwidth = sizeof(unsigned long); + words_per_bus = (map_bankwidth(map)) / wordwidth; // i.e. normally 1 + } else { + wordwidth = map_bankwidth(map); + words_per_bus = 1; + } + + chip_mode = map_bankwidth(map) / cfi_interleave(cfi); + chips_per_word = wordwidth * cfi_interleave(cfi) / map_bankwidth(map); + + /* First, determine what the bit-pattern should be for a single + device, according to chip mode and endianness... */ + switch (chip_mode) { + default: BUG(); + case 1: + onecmd = cmd; + break; + case 2: + onecmd = cpu_to_cfi16(cmd); + break; + case 4: + onecmd = cpu_to_cfi32(cmd); + break; + } + + /* Now replicate it across the size of an unsigned long, or + just to the bus width as appropriate */ + switch (chips_per_word) { + default: BUG(); +#if BITS_PER_LONG >= 64 + case 8: + onecmd |= (onecmd << (chip_mode * 32)); +#endif + case 4: + onecmd |= (onecmd << (chip_mode * 16)); + case 2: + onecmd |= (onecmd << (chip_mode * 8)); + case 1: + ; + } + + /* And finally, for the multi-word case, replicate it + in all words in the structure */ + for (i=0; i < words_per_bus; i++) { + val.x[i] = onecmd; + } + + return val; +} +#define CMD(x) cfi_build_cmd((x), map, cfi) + +/* + * Sends a CFI command to a bank of flash for the given geometry. + * + * Returns the offset in flash where the command was written. + * If prev_val is non-null, it will be set to the value at the command address, + * before the command was written. + */ +static inline uint32_t cfi_send_gen_cmd(u_char cmd, uint32_t cmd_addr, uint32_t base, + struct map_info *map, struct cfi_private *cfi, + int type, map_word *prev_val) +{ + map_word val; + uint32_t addr = base + cfi_build_cmd_addr(cmd_addr, cfi_interleave(cfi), type); + + val = cfi_build_cmd(cmd, map, cfi); + + if (prev_val) + *prev_val = map_read(map, addr); + + map_write(map, val, addr); + + return addr - base; +} + +static inline uint8_t cfi_read_query(struct map_info *map, uint32_t addr) +{ + map_word val = map_read(map, addr); + + if (map_bankwidth_is_1(map)) { + return val.x[0]; + } else if (map_bankwidth_is_2(map)) { + return cfi16_to_cpu(val.x[0]); + } else { + /* No point in a 64-bit byteswap since that would just be + swapping the responses from different chips, and we are + only interested in one chip (a representative sample) */ + return cfi32_to_cpu(val.x[0]); + } +} + +static inline void cfi_udelay(int us) +{ + if (us >= 1000) { + msleep((us+999)/1000); + } else { + udelay(us); + cond_resched(); + } +} + +static inline void cfi_spin_lock(spinlock_t *mutex) +{ + spin_lock_bh(mutex); +} + +static inline void cfi_spin_unlock(spinlock_t *mutex) +{ + spin_unlock_bh(mutex); +} + +struct cfi_extquery *cfi_read_pri(struct map_info *map, uint16_t adr, uint16_t size, + const char* name); +struct cfi_fixup { + uint16_t mfr; + uint16_t id; + void (*fixup)(struct mtd_info *mtd, void* param); + void* param; +}; + +#define CFI_MFR_ANY 0xffff +#define CFI_ID_ANY 0xffff + +#define CFI_MFR_AMD 0x0001 +#define CFI_MFR_ST 0x0020 /* STMicroelectronics */ + +void cfi_fixup(struct mtd_info *mtd, struct cfi_fixup* fixups); + +typedef int (*varsize_frob_t)(struct map_info *map, struct flchip *chip, + unsigned long adr, int len, void *thunk); + +int cfi_varsize_frob(struct mtd_info *mtd, varsize_frob_t frob, + loff_t ofs, size_t len, void *thunk); + + +#endif /* __MTD_CFI_H__ */ diff --git a/include/linux/mtd/cfi_endian.h b/include/linux/mtd/cfi_endian.h new file mode 100644 index 0000000..25724f7 --- /dev/null +++ b/include/linux/mtd/cfi_endian.h @@ -0,0 +1,57 @@ +/* + * $Id: cfi_endian.h,v 1.11 2002/01/30 23:20:48 awozniak Exp $ + * + */ + +#include + +#ifndef CONFIG_MTD_CFI_ADV_OPTIONS + +#define CFI_HOST_ENDIAN + +#else + +#ifdef CONFIG_MTD_CFI_NOSWAP +#define CFI_HOST_ENDIAN +#endif + +#ifdef CONFIG_MTD_CFI_LE_BYTE_SWAP +#define CFI_LITTLE_ENDIAN +#endif + +#ifdef CONFIG_MTD_CFI_BE_BYTE_SWAP +#define CFI_BIG_ENDIAN +#endif + +#endif + +#if defined(CFI_LITTLE_ENDIAN) +#define cpu_to_cfi8(x) (x) +#define cfi8_to_cpu(x) (x) +#define cpu_to_cfi16(x) cpu_to_le16(x) +#define cpu_to_cfi32(x) cpu_to_le32(x) +#define cpu_to_cfi64(x) cpu_to_le64(x) +#define cfi16_to_cpu(x) le16_to_cpu(x) +#define cfi32_to_cpu(x) le32_to_cpu(x) +#define cfi64_to_cpu(x) le64_to_cpu(x) +#elif defined (CFI_BIG_ENDIAN) +#define cpu_to_cfi8(x) (x) +#define cfi8_to_cpu(x) (x) +#define cpu_to_cfi16(x) cpu_to_be16(x) +#define cpu_to_cfi32(x) cpu_to_be32(x) +#define cpu_to_cfi64(x) cpu_to_be64(x) +#define cfi16_to_cpu(x) be16_to_cpu(x) +#define cfi32_to_cpu(x) be32_to_cpu(x) +#define cfi64_to_cpu(x) be64_to_cpu(x) +#elif defined (CFI_HOST_ENDIAN) +#define cpu_to_cfi8(x) (x) +#define cfi8_to_cpu(x) (x) +#define cpu_to_cfi16(x) (x) +#define cpu_to_cfi32(x) (x) +#define cpu_to_cfi64(x) (x) +#define cfi16_to_cpu(x) (x) +#define cfi32_to_cpu(x) (x) +#define cfi64_to_cpu(x) (x) +#else +#error No CFI endianness defined +#endif diff --git a/include/linux/mtd/compatmac.h b/include/linux/mtd/compatmac.h new file mode 100644 index 0000000..7d1300d --- /dev/null +++ b/include/linux/mtd/compatmac.h @@ -0,0 +1,10 @@ + +#ifndef __LINUX_MTD_COMPATMAC_H__ +#define __LINUX_MTD_COMPATMAC_H__ + +/* Nothing to see here. We write 2.5-compatible code and this + file makes it all OK in older kernels, but it's empty in _current_ + kernels. Include guard just to make GCC ignore it in future inclusions + anyway... */ + +#endif /* __LINUX_MTD_COMPATMAC_H__ */ diff --git a/include/linux/mtd/concat.h b/include/linux/mtd/concat.h new file mode 100644 index 0000000..ed8dc67 --- /dev/null +++ b/include/linux/mtd/concat.h @@ -0,0 +1,23 @@ +/* + * MTD device concatenation layer definitions + * + * (C) 2002 Robert Kaiser + * + * This code is GPL + * + * $Id: concat.h,v 1.1 2002/03/08 16:34:36 rkaiser Exp $ + */ + +#ifndef MTD_CONCAT_H +#define MTD_CONCAT_H + + +struct mtd_info *mtd_concat_create( + struct mtd_info *subdev[], /* subdevices to concatenate */ + int num_devs, /* number of subdevices */ + char *name); /* name for the new device */ + +void mtd_concat_destroy(struct mtd_info *mtd); + +#endif + diff --git a/include/linux/mtd/doc2000.h b/include/linux/mtd/doc2000.h new file mode 100644 index 0000000..953e64f --- /dev/null +++ b/include/linux/mtd/doc2000.h @@ -0,0 +1,195 @@ +/* + * Linux driver for Disk-On-Chip devices + * + * Copyright (C) 1999 Machine Vision Holdings, Inc. + * Copyright (C) 2001-2003 David Woodhouse + * Copyright (C) 2002-2003 Greg Ungerer + * Copyright (C) 2002-2003 SnapGear Inc + * + * $Id: doc2000.h,v 1.24 2005/01/05 12:40:38 dwmw2 Exp $ + * + * Released under GPL + */ + +#ifndef __MTD_DOC2000_H__ +#define __MTD_DOC2000_H__ + +#include +#include + +#define DoC_Sig1 0 +#define DoC_Sig2 1 + +#define DoC_ChipID 0x1000 +#define DoC_DOCStatus 0x1001 +#define DoC_DOCControl 0x1002 +#define DoC_FloorSelect 0x1003 +#define DoC_CDSNControl 0x1004 +#define DoC_CDSNDeviceSelect 0x1005 +#define DoC_ECCConf 0x1006 +#define DoC_2k_ECCStatus 0x1007 + +#define DoC_CDSNSlowIO 0x100d +#define DoC_ECCSyndrome0 0x1010 +#define DoC_ECCSyndrome1 0x1011 +#define DoC_ECCSyndrome2 0x1012 +#define DoC_ECCSyndrome3 0x1013 +#define DoC_ECCSyndrome4 0x1014 +#define DoC_ECCSyndrome5 0x1015 +#define DoC_AliasResolution 0x101b +#define DoC_ConfigInput 0x101c +#define DoC_ReadPipeInit 0x101d +#define DoC_WritePipeTerm 0x101e +#define DoC_LastDataRead 0x101f +#define DoC_NOP 0x1020 + +#define DoC_Mil_CDSN_IO 0x0800 +#define DoC_2k_CDSN_IO 0x1800 + +#define DoC_Mplus_NOP 0x1002 +#define DoC_Mplus_AliasResolution 0x1004 +#define DoC_Mplus_DOCControl 0x1006 +#define DoC_Mplus_AccessStatus 0x1008 +#define DoC_Mplus_DeviceSelect 0x1008 +#define DoC_Mplus_Configuration 0x100a +#define DoC_Mplus_OutputControl 0x100c +#define DoC_Mplus_FlashControl 0x1020 +#define DoC_Mplus_FlashSelect 0x1022 +#define DoC_Mplus_FlashCmd 0x1024 +#define DoC_Mplus_FlashAddress 0x1026 +#define DoC_Mplus_FlashData0 0x1028 +#define DoC_Mplus_FlashData1 0x1029 +#define DoC_Mplus_ReadPipeInit 0x102a +#define DoC_Mplus_LastDataRead 0x102c +#define DoC_Mplus_LastDataRead1 0x102d +#define DoC_Mplus_WritePipeTerm 0x102e +#define DoC_Mplus_ECCSyndrome0 0x1040 +#define DoC_Mplus_ECCSyndrome1 0x1041 +#define DoC_Mplus_ECCSyndrome2 0x1042 +#define DoC_Mplus_ECCSyndrome3 0x1043 +#define DoC_Mplus_ECCSyndrome4 0x1044 +#define DoC_Mplus_ECCSyndrome5 0x1045 +#define DoC_Mplus_ECCConf 0x1046 +#define DoC_Mplus_Toggle 0x1046 +#define DoC_Mplus_DownloadStatus 0x1074 +#define DoC_Mplus_CtrlConfirm 0x1076 +#define DoC_Mplus_Power 0x1fff + +/* How to access the device? + * On ARM, it'll be mmap'd directly with 32-bit wide accesses. + * On PPC, it's mmap'd and 16-bit wide. + * Others use readb/writeb + */ +#if defined(__arm__) +#define ReadDOC_(adr, reg) ((unsigned char)(*(volatile __u32 *)(((unsigned long)adr)+((reg)<<2)))) +#define WriteDOC_(d, adr, reg) do{ *(volatile __u32 *)(((unsigned long)adr)+((reg)<<2)) = (__u32)d; wmb();} while(0) +#define DOC_IOREMAP_LEN 0x8000 +#elif defined(__ppc__) +#define ReadDOC_(adr, reg) ((unsigned char)(*(volatile __u16 *)(((unsigned long)adr)+((reg)<<1)))) +#define WriteDOC_(d, adr, reg) do{ *(volatile __u16 *)(((unsigned long)adr)+((reg)<<1)) = (__u16)d; wmb();} while(0) +#define DOC_IOREMAP_LEN 0x4000 +#else +#define ReadDOC_(adr, reg) readb((void __iomem *)(adr) + (reg)) +#define WriteDOC_(d, adr, reg) writeb(d, (void __iomem *)(adr) + (reg)) +#define DOC_IOREMAP_LEN 0x2000 + +#endif + +#if defined(__i386__) || defined(__x86_64__) +#define USE_MEMCPY +#endif + +/* These are provided to directly use the DoC_xxx defines */ +#define ReadDOC(adr, reg) ReadDOC_(adr,DoC_##reg) +#define WriteDOC(d, adr, reg) WriteDOC_(d,adr,DoC_##reg) + +#define DOC_MODE_RESET 0 +#define DOC_MODE_NORMAL 1 +#define DOC_MODE_RESERVED1 2 +#define DOC_MODE_RESERVED2 3 + +#define DOC_MODE_CLR_ERR 0x80 +#define DOC_MODE_RST_LAT 0x10 +#define DOC_MODE_BDECT 0x08 +#define DOC_MODE_MDWREN 0x04 + +#define DOC_ChipID_Doc2k 0x20 +#define DOC_ChipID_Doc2kTSOP 0x21 /* internal number for MTD */ +#define DOC_ChipID_DocMil 0x30 +#define DOC_ChipID_DocMilPlus32 0x40 +#define DOC_ChipID_DocMilPlus16 0x41 + +#define CDSN_CTRL_FR_B 0x80 +#define CDSN_CTRL_FR_B0 0x40 +#define CDSN_CTRL_FR_B1 0x80 + +#define CDSN_CTRL_ECC_IO 0x20 +#define CDSN_CTRL_FLASH_IO 0x10 +#define CDSN_CTRL_WP 0x08 +#define CDSN_CTRL_ALE 0x04 +#define CDSN_CTRL_CLE 0x02 +#define CDSN_CTRL_CE 0x01 + +#define DOC_ECC_RESET 0 +#define DOC_ECC_ERROR 0x80 +#define DOC_ECC_RW 0x20 +#define DOC_ECC__EN 0x08 +#define DOC_TOGGLE_BIT 0x04 +#define DOC_ECC_RESV 0x02 +#define DOC_ECC_IGNORE 0x01 + +#define DOC_FLASH_CE 0x80 +#define DOC_FLASH_WP 0x40 +#define DOC_FLASH_BANK 0x02 + +/* We have to also set the reserved bit 1 for enable */ +#define DOC_ECC_EN (DOC_ECC__EN | DOC_ECC_RESV) +#define DOC_ECC_DIS (DOC_ECC_RESV) + +struct Nand { + char floor, chip; + unsigned long curadr; + unsigned char curmode; + /* Also some erase/write/pipeline info when we get that far */ +}; + +#define MAX_FLOORS 4 +#define MAX_CHIPS 4 + +#define MAX_FLOORS_MIL 1 +#define MAX_CHIPS_MIL 1 + +#define MAX_FLOORS_MPLUS 2 +#define MAX_CHIPS_MPLUS 1 + +#define ADDR_COLUMN 1 +#define ADDR_PAGE 2 +#define ADDR_COLUMN_PAGE 3 + +struct DiskOnChip { + unsigned long physadr; + void __iomem *virtadr; + unsigned long totlen; + unsigned char ChipID; /* Type of DiskOnChip */ + int ioreg; + + unsigned long mfr; /* Flash IDs - only one type of flash per device */ + unsigned long id; + int chipshift; + char page256; + char pageadrlen; + char interleave; /* Internal interleaving - Millennium Plus style */ + unsigned long erasesize; + + int curfloor; + int curchip; + + int numchips; + struct Nand *chips; + struct mtd_info *nextdoc; + struct semaphore lock; +}; + +int doc_decode_ecc(unsigned char sector[512], unsigned char ecc1[6]); + +#endif /* __MTD_DOC2000_H__ */ diff --git a/include/linux/mtd/flashchip.h b/include/linux/mtd/flashchip.h new file mode 100644 index 0000000..c66ba81 --- /dev/null +++ b/include/linux/mtd/flashchip.h @@ -0,0 +1,89 @@ + +/* + * struct flchip definition + * + * Contains information about the location and state of a given flash device + * + * (C) 2000 Red Hat. GPLd. + * + * $Id: flashchip.h,v 1.15 2004/11/05 22:41:06 nico Exp $ + * + */ + +#ifndef __MTD_FLASHCHIP_H__ +#define __MTD_FLASHCHIP_H__ + +/* For spinlocks. sched.h includes spinlock.h from whichever directory it + * happens to be in - so we don't have to care whether we're on 2.2, which + * has asm/spinlock.h, or 2.4, which has linux/spinlock.h + */ +#include + +typedef enum { + FL_READY, + FL_STATUS, + FL_CFI_QUERY, + FL_JEDEC_QUERY, + FL_ERASING, + FL_ERASE_SUSPENDING, + FL_ERASE_SUSPENDED, + FL_WRITING, + FL_WRITING_TO_BUFFER, + FL_WRITE_SUSPENDING, + FL_WRITE_SUSPENDED, + FL_PM_SUSPENDED, + FL_SYNCING, + FL_UNLOADING, + FL_LOCKING, + FL_UNLOCKING, + FL_POINT, + FL_XIP_WHILE_ERASING, + FL_XIP_WHILE_WRITING, + FL_UNKNOWN +} flstate_t; + + + +/* NOTE: confusingly, this can be used to refer to more than one chip at a time, + if they're interleaved. This can even refer to individual partitions on + the same physical chip when present. */ + +struct flchip { + unsigned long start; /* Offset within the map */ + // unsigned long len; + /* We omit len for now, because when we group them together + we insist that they're all of the same size, and the chip size + is held in the next level up. If we get more versatile later, + it'll make it a damn sight harder to find which chip we want from + a given offset, and we'll want to add the per-chip length field + back in. + */ + int ref_point_counter; + flstate_t state; + flstate_t oldstate; + + int write_suspended:1; + int erase_suspended:1; + unsigned long in_progress_block_addr; + + spinlock_t *mutex; + spinlock_t _spinlock; /* We do it like this because sometimes they'll be shared. */ + wait_queue_head_t wq; /* Wait on here when we're waiting for the chip + to be ready */ + int word_write_time; + int buffer_write_time; + int erase_time; + + void *priv; +}; + +/* This is used to handle contention on write/erase operations + between partitions of the same physical chip. */ +struct flchip_shared { + spinlock_t lock; + struct flchip *writing; + struct flchip *erasing; +}; + + +#endif /* __MTD_FLASHCHIP_H__ */ diff --git a/include/linux/mtd/ftl.h b/include/linux/mtd/ftl.h new file mode 100644 index 0000000..3678459 --- /dev/null +++ b/include/linux/mtd/ftl.h @@ -0,0 +1,76 @@ +/* + * $Id: ftl.h,v 1.6 2003/01/24 13:20:04 dwmw2 Exp $ + * + * Derived from (and probably identical to): + * ftl.h 1.7 1999/10/25 20:23:17 + * + * The contents of this file are subject to the Mozilla Public License + * Version 1.1 (the "License"); you may not use this file except in + * compliance with the License. You may obtain a copy of the License + * at http://www.mozilla.org/MPL/ + * + * Software distributed under the License is distributed on an "AS IS" + * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + * the License for the specific language governing rights and + * limitations under the License. + * + * The initial developer of the original code is David A. Hinds + * . Portions created by David A. Hinds + * are Copyright (C) 1999 David A. Hinds. All Rights Reserved. + * + * Alternatively, the contents of this file may be used under the + * terms of the GNU General Public License version 2 (the "GPL"), in + * which case the provisions of the GPL are applicable instead of the + * above. If you wish to allow the use of your version of this file + * only under the terms of the GPL and not to allow others to use + * your version of this file under the MPL, indicate your decision by + * deleting the provisions above and replace them with the notice and + * other provisions required by the GPL. If you do not delete the + * provisions above, a recipient may use your version of this file + * under either the MPL or the GPL. + */ + +#ifndef _LINUX_FTL_H +#define _LINUX_FTL_H + +typedef struct erase_unit_header_t { + u_int8_t LinkTargetTuple[5]; + u_int8_t DataOrgTuple[10]; + u_int8_t NumTransferUnits; + u_int32_t EraseCount; + u_int16_t LogicalEUN; + u_int8_t BlockSize; + u_int8_t EraseUnitSize; + u_int16_t FirstPhysicalEUN; + u_int16_t NumEraseUnits; + u_int32_t FormattedSize; + u_int32_t FirstVMAddress; + u_int16_t NumVMPages; + u_int8_t Flags; + u_int8_t Code; + u_int32_t SerialNumber; + u_int32_t AltEUHOffset; + u_int32_t BAMOffset; + u_int8_t Reserved[12]; + u_int8_t EndTuple[2]; +} erase_unit_header_t; + +/* Flags in erase_unit_header_t */ +#define HIDDEN_AREA 0x01 +#define REVERSE_POLARITY 0x02 +#define DOUBLE_BAI 0x04 + +/* Definitions for block allocation information */ + +#define BLOCK_FREE(b) ((b) == 0xffffffff) +#define BLOCK_DELETED(b) (((b) == 0) || ((b) == 0xfffffffe)) + +#define BLOCK_TYPE(b) ((b) & 0x7f) +#define BLOCK_ADDRESS(b) ((b) & ~0x7f) +#define BLOCK_NUMBER(b) ((b) >> 9) +#define BLOCK_CONTROL 0x30 +#define BLOCK_DATA 0x40 +#define BLOCK_REPLACEMENT 0x60 +#define BLOCK_BAD 0x70 + +#endif /* _LINUX_FTL_H */ diff --git a/include/linux/mtd/gen_probe.h b/include/linux/mtd/gen_probe.h new file mode 100644 index 0000000..3d7bdec --- /dev/null +++ b/include/linux/mtd/gen_probe.h @@ -0,0 +1,23 @@ +/* + * (C) 2001, 2001 Red Hat, Inc. + * GPL'd + * $Id: gen_probe.h,v 1.3 2004/10/20 22:10:33 dwmw2 Exp $ + */ + +#ifndef __LINUX_MTD_GEN_PROBE_H__ +#define __LINUX_MTD_GEN_PROBE_H__ + +#include +#include +#include +#include + +struct chip_probe { + char *name; + int (*probe_chip)(struct map_info *map, __u32 base, + unsigned long *chip_map, struct cfi_private *cfi); +}; + +struct mtd_info *mtd_do_chip_probe(struct map_info *map, struct chip_probe *cp); + +#endif /* __LINUX_MTD_GEN_PROBE_H__ */ diff --git a/include/linux/mtd/iflash.h b/include/linux/mtd/iflash.h new file mode 100644 index 0000000..9aa5b4f --- /dev/null +++ b/include/linux/mtd/iflash.h @@ -0,0 +1,98 @@ +/* $Id: iflash.h,v 1.2 2000/11/13 18:01:54 dwmw2 Exp $ */ + +#ifndef __MTD_IFLASH_H__ +#define __MTD_IFLASH_H__ + +/* Extended CIS registers for Series 2 and 2+ cards */ +/* The registers are all offsets from 0x4000 */ +#define CISREG_CSR 0x0100 +#define CISREG_WP 0x0104 +#define CISREG_RDYBSY 0x0140 + +/* Extended CIS registers for Series 2 cards */ +#define CISREG_SLEEP 0x0118 +#define CISREG_RDY_MASK 0x0120 +#define CISREG_RDY_STATUS 0x0130 + +/* Extended CIS registers for Series 2+ cards */ +#define CISREG_VCR 0x010c + +/* Card Status Register */ +#define CSR_SRESET 0x20 /* Soft reset */ +#define CSR_CMWP 0x10 /* Common memory write protect */ +#define CSR_PWRDOWN 0x08 /* Power down status */ +#define CSR_CISWP 0x04 /* Common memory CIS WP */ +#define CSR_WP 0x02 /* Mechanical write protect */ +#define CSR_READY 0x01 /* Ready/busy status */ + +/* Write Protection Register */ +#define WP_BLKEN 0x04 /* Enable block locking */ +#define WP_CMWP 0x02 /* Common memory write protect */ +#define WP_CISWP 0x01 /* Common memory CIS WP */ + +/* Voltage Control Register */ +#define VCR_VCC_LEVEL 0x80 /* 0 = 5V, 1 = 3.3V */ +#define VCR_VPP_VALID 0x02 /* Vpp Valid */ +#define VCR_VPP_GEN 0x01 /* Integrated Vpp generator */ + +/* Ready/Busy Mode Register */ +#define RDYBSY_RACK 0x02 /* Ready acknowledge */ +#define RDYBSY_MODE 0x01 /* 1 = high performance */ + +#define LOW(x) ((x) & 0xff) + +/* 28F008SA-Compatible Command Set */ +#define IF_READ_ARRAY 0xffff +#define IF_INTEL_ID 0x9090 +#define IF_READ_CSR 0x7070 +#define IF_CLEAR_CSR 0x5050 +#define IF_WRITE 0x4040 +#define IF_BLOCK_ERASE 0x2020 +#define IF_ERASE_SUSPEND 0xb0b0 +#define IF_CONFIRM 0xd0d0 + +/* 28F016SA Performance Enhancement Commands */ +#define IF_READ_PAGE 0x7575 +#define IF_PAGE_SWAP 0x7272 +#define IF_SINGLE_LOAD 0x7474 +#define IF_SEQ_LOAD 0xe0e0 +#define IF_PAGE_WRITE 0x0c0c +#define IF_RDY_MODE 0x9696 +#define IF_RDY_LEVEL 0x0101 +#define IF_RDY_PULSE_WRITE 0x0202 +#define IF_RDY_PULSE_ERASE 0x0303 +#define IF_RDY_DISABLE 0x0404 +#define IF_LOCK_BLOCK 0x7777 +#define IF_UPLOAD_STATUS 0x9797 +#define IF_READ_ESR 0x7171 +#define IF_ERASE_UNLOCKED 0xa7a7 +#define IF_SLEEP 0xf0f0 +#define IF_ABORT 0x8080 +#define IF_UPLOAD_DEVINFO 0x9999 + +/* Definitions for Compatible Status Register */ +#define CSR_WR_READY 0x8080 /* Write state machine status */ +#define CSR_ERA_SUSPEND 0x4040 /* Erase suspend status */ +#define CSR_ERA_ERR 0x2020 /* Erase status */ +#define CSR_WR_ERR 0x1010 /* Data write status */ +#define CSR_VPP_LOW 0x0808 /* Vpp status */ + +/* Definitions for Global Status Register */ +#define GSR_WR_READY 0x8080 /* Write state machine status */ +#define GSR_OP_SUSPEND 0x4040 /* Operation suspend status */ +#define GSR_OP_ERR 0x2020 /* Device operation status */ +#define GSR_SLEEP 0x1010 /* Device sleep status */ +#define GSR_QUEUE_FULL 0x0808 /* Queue status */ +#define GSR_PAGE_AVAIL 0x0404 /* Page buffer available status */ +#define GSR_PAGE_READY 0x0202 /* Page buffer status */ +#define GSR_PAGE_SELECT 0x0101 /* Page buffer select status */ + +/* Definitions for Block Status Register */ +#define BSR_READY 0x8080 /* Block status */ +#define BSR_UNLOCK 0x4040 /* Block lock status */ +#define BSR_FAILED 0x2020 /* Block operation status */ +#define BSR_ABORTED 0x1010 /* Operation abort status */ +#define BSR_QUEUE_FULL 0x0808 /* Queue status */ +#define BSR_VPP_LOW 0x0404 /* Vpp status */ + +#endif /* __MTD_IFLASH_H__ */ diff --git a/include/linux/mtd/inftl.h b/include/linux/mtd/inftl.h new file mode 100644 index 0000000..b52c8cb --- /dev/null +++ b/include/linux/mtd/inftl.h @@ -0,0 +1,57 @@ +/* + * inftl.h -- defines to support the Inverse NAND Flash Translation Layer + * + * (C) Copyright 2002, Greg Ungerer (gerg@snapgear.com) + * + * $Id: inftl.h,v 1.6 2004/06/30 14:49:00 dbrown Exp $ + */ + +#ifndef __MTD_INFTL_H__ +#define __MTD_INFTL_H__ + +#ifndef __KERNEL__ +#error This is a kernel header. Perhaps include nftl-user.h instead? +#endif + +#include +#include +#include + +#include + +#ifndef INFTL_MAJOR +#define INFTL_MAJOR 94 +#endif +#define INFTL_PARTN_BITS 4 + +#ifdef __KERNEL__ + +struct INFTLrecord { + struct mtd_blktrans_dev mbd; + __u16 MediaUnit; + __u32 EraseSize; + struct INFTLMediaHeader MediaHdr; + int usecount; + unsigned char heads; + unsigned char sectors; + unsigned short cylinders; + __u16 numvunits; + __u16 firstEUN; + __u16 lastEUN; + __u16 numfreeEUNs; + __u16 LastFreeEUN; /* To speed up finding a free EUN */ + int head,sect,cyl; + __u16 *PUtable; /* Physical Unit Table */ + __u16 *VUtable; /* Virtual Unit Table */ + unsigned int nb_blocks; /* number of physical blocks */ + unsigned int nb_boot_blocks; /* number of blocks used by the bios */ + struct erase_info instr; + struct nand_oobinfo oobinfo; +}; + +int INFTL_mount(struct INFTLrecord *s); +int INFTL_formatblock(struct INFTLrecord *s, int block); + +#endif /* __KERNEL__ */ + +#endif /* __MTD_INFTL_H__ */ diff --git a/include/linux/mtd/jedec.h b/include/linux/mtd/jedec.h new file mode 100644 index 0000000..2ba0f70 --- /dev/null +++ b/include/linux/mtd/jedec.h @@ -0,0 +1,66 @@ + +/* JEDEC Flash Interface. + * This is an older type of interface for self programming flash. It is + * commonly use in older AMD chips and is obsolete compared with CFI. + * It is called JEDEC because the JEDEC association distributes the ID codes + * for the chips. + * + * See the AMD flash databook for information on how to operate the interface. + * + * $Id: jedec.h,v 1.3 2003/05/21 11:51:01 dwmw2 Exp $ + */ + +#ifndef __LINUX_MTD_JEDEC_H__ +#define __LINUX_MTD_JEDEC_H__ + +#include + +#define MAX_JEDEC_CHIPS 16 + +// Listing of all supported chips and their information +struct JEDECTable +{ + __u16 jedec; + char *name; + unsigned long size; + unsigned long sectorsize; + __u32 capabilities; +}; + +// JEDEC being 0 is the end of the chip array +struct jedec_flash_chip +{ + __u16 jedec; + unsigned long size; + unsigned long sectorsize; + + // *(__u8*)(base + (adder << addrshift)) = data << datashift + // Address size = size << addrshift + unsigned long base; // Byte 0 of the flash, will be unaligned + unsigned int datashift; // Useful for 32bit/16bit accesses + unsigned int addrshift; + unsigned long offset; // linerized start. base==offset for unbanked, uninterleaved flash + + __u32 capabilities; + + // These markers are filled in by the flash_chip_scan function + unsigned long start; + unsigned long length; +}; + +struct jedec_private +{ + unsigned long size; // Total size of all the devices + + /* Bank handling. If sum(bank_fill) == size then this is linear flash. + Otherwise the mapping has holes in it. bank_fill may be used to + find the holes, but in the common symetric case + bank_fill[0] == bank_fill[*], thus addresses may be computed + mathmatically. bank_fill must be powers of two */ + unsigned is_banked; + unsigned long bank_fill[MAX_JEDEC_CHIPS]; + + struct jedec_flash_chip chips[MAX_JEDEC_CHIPS]; +}; + +#endif diff --git a/include/linux/mtd/map.h b/include/linux/mtd/map.h new file mode 100644 index 0000000..f0268b9 --- /dev/null +++ b/include/linux/mtd/map.h @@ -0,0 +1,412 @@ + +/* Overhauled routines for dealing with different mmap regions of flash */ +/* $Id: map.h,v 1.46 2005/01/05 17:09:44 dwmw2 Exp $ */ + +#ifndef __LINUX_MTD_MAP_H__ +#define __LINUX_MTD_MAP_H__ + +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_MTD_MAP_BANK_WIDTH_1 +#define map_bankwidth(map) 1 +#define map_bankwidth_is_1(map) (map_bankwidth(map) == 1) +#define map_bankwidth_is_large(map) (0) +#define map_words(map) (1) +#define MAX_MAP_BANKWIDTH 1 +#else +#define map_bankwidth_is_1(map) (0) +#endif + +#ifdef CONFIG_MTD_MAP_BANK_WIDTH_2 +# ifdef map_bankwidth +# undef map_bankwidth +# define map_bankwidth(map) ((map)->bankwidth) +# else +# define map_bankwidth(map) 2 +# define map_bankwidth_is_large(map) (0) +# define map_words(map) (1) +# endif +#define map_bankwidth_is_2(map) (map_bankwidth(map) == 2) +#undef MAX_MAP_BANKWIDTH +#define MAX_MAP_BANKWIDTH 2 +#else +#define map_bankwidth_is_2(map) (0) +#endif + +#ifdef CONFIG_MTD_MAP_BANK_WIDTH_4 +# ifdef map_bankwidth +# undef map_bankwidth +# define map_bankwidth(map) ((map)->bankwidth) +# else +# define map_bankwidth(map) 4 +# define map_bankwidth_is_large(map) (0) +# define map_words(map) (1) +# endif +#define map_bankwidth_is_4(map) (map_bankwidth(map) == 4) +#undef MAX_MAP_BANKWIDTH +#define MAX_MAP_BANKWIDTH 4 +#else +#define map_bankwidth_is_4(map) (0) +#endif + +/* ensure we never evaluate anything shorted than an unsigned long + * to zero, and ensure we'll never miss the end of an comparison (bjd) */ + +#define map_calc_words(map) ((map_bankwidth(map) + (sizeof(unsigned long)-1))/ sizeof(unsigned long)) + +#ifdef CONFIG_MTD_MAP_BANK_WIDTH_8 +# ifdef map_bankwidth +# undef map_bankwidth +# define map_bankwidth(map) ((map)->bankwidth) +# if BITS_PER_LONG < 64 +# undef map_bankwidth_is_large +# define map_bankwidth_is_large(map) (map_bankwidth(map) > BITS_PER_LONG/8) +# undef map_words +# define map_words(map) map_calc_words(map) +# endif +# else +# define map_bankwidth(map) 8 +# define map_bankwidth_is_large(map) (BITS_PER_LONG < 64) +# define map_words(map) map_calc_words(map) +# endif +#define map_bankwidth_is_8(map) (map_bankwidth(map) == 8) +#undef MAX_MAP_BANKWIDTH +#define MAX_MAP_BANKWIDTH 8 +#else +#define map_bankwidth_is_8(map) (0) +#endif + +#ifdef CONFIG_MTD_MAP_BANK_WIDTH_16 +# ifdef map_bankwidth +# undef map_bankwidth +# define map_bankwidth(map) ((map)->bankwidth) +# undef map_bankwidth_is_large +# define map_bankwidth_is_large(map) (map_bankwidth(map) > BITS_PER_LONG/8) +# undef map_words +# define map_words(map) map_calc_words(map) +# else +# define map_bankwidth(map) 16 +# define map_bankwidth_is_large(map) (1) +# define map_words(map) map_calc_words(map) +# endif +#define map_bankwidth_is_16(map) (map_bankwidth(map) == 16) +#undef MAX_MAP_BANKWIDTH +#define MAX_MAP_BANKWIDTH 16 +#else +#define map_bankwidth_is_16(map) (0) +#endif + +#ifdef CONFIG_MTD_MAP_BANK_WIDTH_32 +# ifdef map_bankwidth +# undef map_bankwidth +# define map_bankwidth(map) ((map)->bankwidth) +# undef map_bankwidth_is_large +# define map_bankwidth_is_large(map) (map_bankwidth(map) > BITS_PER_LONG/8) +# undef map_words +# define map_words(map) map_calc_words(map) +# else +# define map_bankwidth(map) 32 +# define map_bankwidth_is_large(map) (1) +# define map_words(map) map_calc_words(map) +# endif +#define map_bankwidth_is_32(map) (map_bankwidth(map) == 32) +#undef MAX_MAP_BANKWIDTH +#define MAX_MAP_BANKWIDTH 32 +#else +#define map_bankwidth_is_32(map) (0) +#endif + +#ifndef map_bankwidth +#error "No bus width supported. What's the point?" +#endif + +static inline int map_bankwidth_supported(int w) +{ + switch (w) { +#ifdef CONFIG_MTD_MAP_BANK_WIDTH_1 + case 1: +#endif +#ifdef CONFIG_MTD_MAP_BANK_WIDTH_2 + case 2: +#endif +#ifdef CONFIG_MTD_MAP_BANK_WIDTH_4 + case 4: +#endif +#ifdef CONFIG_MTD_MAP_BANK_WIDTH_8 + case 8: +#endif +#ifdef CONFIG_MTD_MAP_BANK_WIDTH_16 + case 16: +#endif +#ifdef CONFIG_MTD_MAP_BANK_WIDTH_32 + case 32: +#endif + return 1; + + default: + return 0; + } +} + +#define MAX_MAP_LONGS ( ((MAX_MAP_BANKWIDTH*8) + BITS_PER_LONG - 1) / BITS_PER_LONG ) + +typedef union { + unsigned long x[MAX_MAP_LONGS]; +} map_word; + +/* The map stuff is very simple. You fill in your struct map_info with + a handful of routines for accessing the device, making sure they handle + paging etc. correctly if your device needs it. Then you pass it off + to a chip probe routine -- either JEDEC or CFI probe or both -- via + do_map_probe(). If a chip is recognised, the probe code will invoke the + appropriate chip driver (if present) and return a struct mtd_info. + At which point, you fill in the mtd->module with your own module + address, and register it with the MTD core code. Or you could partition + it and register the partitions instead, or keep it for your own private + use; whatever. + + The mtd->priv field will point to the struct map_info, and any further + private data required by the chip driver is linked from the + mtd->priv->fldrv_priv field. This allows the map driver to get at + the destructor function map->fldrv_destroy() when it's tired + of living. +*/ + +struct map_info { + char *name; + unsigned long size; + unsigned long phys; +#define NO_XIP (-1UL) + + void __iomem *virt; + void *cached; + + int bankwidth; /* in octets. This isn't necessarily the width + of actual bus cycles -- it's the repeat interval + in bytes, before you are talking to the first chip again. + */ + +#ifdef CONFIG_MTD_COMPLEX_MAPPINGS + map_word (*read)(struct map_info *, unsigned long); + void (*copy_from)(struct map_info *, void *, unsigned long, ssize_t); + + void (*write)(struct map_info *, const map_word, unsigned long); + void (*copy_to)(struct map_info *, unsigned long, const void *, ssize_t); + + /* We can perhaps put in 'point' and 'unpoint' methods, if we really + want to enable XIP for non-linear mappings. Not yet though. */ +#endif + /* It's possible for the map driver to use cached memory in its + copy_from implementation (and _only_ with copy_from). However, + when the chip driver knows some flash area has changed contents, + it will signal it to the map driver through this routine to let + the map driver invalidate the corresponding cache as needed. + If there is no cache to care about this can be set to NULL. */ + void (*inval_cache)(struct map_info *, unsigned long, ssize_t); + + /* set_vpp() must handle being reentered -- enable, enable, disable + must leave it enabled. */ + void (*set_vpp)(struct map_info *, int); + + unsigned long map_priv_1; + unsigned long map_priv_2; + void *fldrv_priv; + struct mtd_chip_driver *fldrv; +}; + +struct mtd_chip_driver { + struct mtd_info *(*probe)(struct map_info *map); + void (*destroy)(struct mtd_info *); + struct module *module; + char *name; + struct list_head list; +}; + +void register_mtd_chip_driver(struct mtd_chip_driver *); +void unregister_mtd_chip_driver(struct mtd_chip_driver *); + +struct mtd_info *do_map_probe(const char *name, struct map_info *map); +void map_destroy(struct mtd_info *mtd); + +#define ENABLE_VPP(map) do { if(map->set_vpp) map->set_vpp(map, 1); } while(0) +#define DISABLE_VPP(map) do { if(map->set_vpp) map->set_vpp(map, 0); } while(0) + +#define INVALIDATE_CACHED_RANGE(map, from, size) \ + do { if(map->inval_cache) map->inval_cache(map, from, size); } while(0) + + +static inline int map_word_equal(struct map_info *map, map_word val1, map_word val2) +{ + int i; + for (i=0; i= 64 + else if (map_bankwidth_is_8(map)) + r.x[0] = get_unaligned((uint64_t *)ptr); +#endif + else if (map_bankwidth_is_large(map)) + memcpy(r.x, ptr, map->bankwidth); + + return r; +} + +static inline map_word map_word_load_partial(struct map_info *map, map_word orig, const unsigned char *buf, int start, int len) +{ + int i; + + if (map_bankwidth_is_large(map)) { + char *dest = (char *)&orig; + memcpy(dest+start, buf, len); + } else { + for (i=start; i < start+len; i++) { + int bitpos; +#ifdef __LITTLE_ENDIAN + bitpos = i*8; +#else /* __BIG_ENDIAN */ + bitpos = (map_bankwidth(map)-1-i)*8; +#endif + orig.x[0] &= ~(0xff << bitpos); + orig.x[0] |= buf[i-start] << bitpos; + } + } + return orig; +} + +static inline map_word map_word_ff(struct map_info *map) +{ + map_word r; + int i; + + for (i=0; ivirt + ofs); + else if (map_bankwidth_is_2(map)) + r.x[0] = __raw_readw(map->virt + ofs); + else if (map_bankwidth_is_4(map)) + r.x[0] = __raw_readl(map->virt + ofs); +#if BITS_PER_LONG >= 64 + else if (map_bankwidth_is_8(map)) + r.x[0] = __raw_readq(map->virt + ofs); +#endif + else if (map_bankwidth_is_large(map)) + memcpy_fromio(r.x, map->virt+ofs, map->bankwidth); + + return r; +} + +static inline void inline_map_write(struct map_info *map, const map_word datum, unsigned long ofs) +{ + if (map_bankwidth_is_1(map)) + __raw_writeb(datum.x[0], map->virt + ofs); + else if (map_bankwidth_is_2(map)) + __raw_writew(datum.x[0], map->virt + ofs); + else if (map_bankwidth_is_4(map)) + __raw_writel(datum.x[0], map->virt + ofs); +#if BITS_PER_LONG >= 64 + else if (map_bankwidth_is_8(map)) + __raw_writeq(datum.x[0], map->virt + ofs); +#endif + else if (map_bankwidth_is_large(map)) + memcpy_toio(map->virt+ofs, datum.x, map->bankwidth); + mb(); +} + +static inline void inline_map_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len) +{ + if (map->cached) + memcpy(to, (char *)map->cached + from, len); + else + memcpy_fromio(to, map->virt + from, len); +} + +static inline void inline_map_copy_to(struct map_info *map, unsigned long to, const void *from, ssize_t len) +{ + memcpy_toio(map->virt + to, from, len); +} + +#ifdef CONFIG_MTD_COMPLEX_MAPPINGS +#define map_read(map, ofs) (map)->read(map, ofs) +#define map_copy_from(map, to, from, len) (map)->copy_from(map, to, from, len) +#define map_write(map, datum, ofs) (map)->write(map, datum, ofs) +#define map_copy_to(map, to, from, len) (map)->copy_to(map, to, from, len) + +extern void simple_map_init(struct map_info *); +#define map_is_linear(map) (map->phys != NO_XIP) + +#else +#define map_read(map, ofs) inline_map_read(map, ofs) +#define map_copy_from(map, to, from, len) inline_map_copy_from(map, to, from, len) +#define map_write(map, datum, ofs) inline_map_write(map, datum, ofs) +#define map_copy_to(map, to, from, len) inline_map_copy_to(map, to, from, len) + + +#define simple_map_init(map) BUG_ON(!map_bankwidth_supported((map)->bankwidth)) +#define map_is_linear(map) (1) + +#endif /* !CONFIG_MTD_COMPLEX_MAPPINGS */ + +#endif /* __LINUX_MTD_MAP_H__ */ diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h new file mode 100644 index 0000000..b3d1343 --- /dev/null +++ b/include/linux/mtd/mtd.h @@ -0,0 +1,226 @@ +/* + * $Id: mtd.h,v 1.56 2004/08/09 18:46:04 dmarlin Exp $ + * + * Copyright (C) 1999-2003 David Woodhouse et al. + * + * Released under GPL + */ + +#ifndef __MTD_MTD_H__ +#define __MTD_MTD_H__ + +#ifndef __KERNEL__ +#error This is a kernel header. Perhaps include mtd-user.h instead? +#endif + +#include +#include +#include +#include +#include + +#include +#include + +#define MTD_CHAR_MAJOR 90 +#define MTD_BLOCK_MAJOR 31 +#define MAX_MTD_DEVICES 16 + +#define MTD_ERASE_PENDING 0x01 +#define MTD_ERASING 0x02 +#define MTD_ERASE_SUSPEND 0x04 +#define MTD_ERASE_DONE 0x08 +#define MTD_ERASE_FAILED 0x10 + +/* If the erase fails, fail_addr might indicate exactly which block failed. If + fail_addr = 0xffffffff, the failure was not at the device level or was not + specific to any particular block. */ +struct erase_info { + struct mtd_info *mtd; + u_int32_t addr; + u_int32_t len; + u_int32_t fail_addr; + u_long time; + u_long retries; + u_int dev; + u_int cell; + void (*callback) (struct erase_info *self); + u_long priv; + u_char state; + struct erase_info *next; +}; + +struct mtd_erase_region_info { + u_int32_t offset; /* At which this region starts, from the beginning of the MTD */ + u_int32_t erasesize; /* For this region */ + u_int32_t numblocks; /* Number of blocks of erasesize in this region */ +}; + +struct mtd_info { + u_char type; + u_int32_t flags; + u_int32_t size; // Total size of the MTD + + /* "Major" erase size for the device. Naïve users may take this + * to be the only erase size available, or may use the more detailed + * information below if they desire + */ + u_int32_t erasesize; + + u_int32_t oobblock; // Size of OOB blocks (e.g. 512) + u_int32_t oobsize; // Amount of OOB data per block (e.g. 16) + u_int32_t oobavail; // Number of bytes in OOB area available for fs + u_int32_t ecctype; + u_int32_t eccsize; + + + // Kernel-only stuff starts here. + char *name; + int index; + + // oobinfo is a nand_oobinfo structure, which can be set by iotcl (MEMSETOOBINFO) + struct nand_oobinfo oobinfo; + + /* Data for variable erase regions. If numeraseregions is zero, + * it means that the whole device has erasesize as given above. + */ + int numeraseregions; + struct mtd_erase_region_info *eraseregions; + + /* This really shouldn't be here. It can go away in 2.5 */ + u_int32_t bank_size; + + int (*erase) (struct mtd_info *mtd, struct erase_info *instr); + + /* This stuff for eXecute-In-Place */ + int (*point) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char **mtdbuf); + + /* We probably shouldn't allow XIP if the unpoint isn't a NULL */ + void (*unpoint) (struct mtd_info *mtd, u_char * addr, loff_t from, size_t len); + + + int (*read) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); + int (*write) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf); + + int (*read_ecc) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf, u_char *eccbuf, struct nand_oobinfo *oobsel); + int (*write_ecc) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf, u_char *eccbuf, struct nand_oobinfo *oobsel); + + int (*read_oob) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); + int (*write_oob) (struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf); + + /* + * Methods to access the protection register area, present in some + * flash devices. The user data is one time programmable but the + * factory data is read only. + */ + int (*read_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); + + int (*read_fact_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); + + /* This function is not yet implemented */ + int (*write_user_prot_reg) (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char *buf); + + /* kvec-based read/write methods. We need these especially for NAND flash, + with its limited number of write cycles per erase. + NB: The 'count' parameter is the number of _vectors_, each of + which contains an (ofs, len) tuple. + */ + int (*readv) (struct mtd_info *mtd, struct kvec *vecs, unsigned long count, loff_t from, size_t *retlen); + int (*readv_ecc) (struct mtd_info *mtd, struct kvec *vecs, unsigned long count, loff_t from, + size_t *retlen, u_char *eccbuf, struct nand_oobinfo *oobsel); + int (*writev) (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to, size_t *retlen); + int (*writev_ecc) (struct mtd_info *mtd, const struct kvec *vecs, unsigned long count, loff_t to, + size_t *retlen, u_char *eccbuf, struct nand_oobinfo *oobsel); + + /* Sync */ + void (*sync) (struct mtd_info *mtd); + + /* Chip-supported device locking */ + int (*lock) (struct mtd_info *mtd, loff_t ofs, size_t len); + int (*unlock) (struct mtd_info *mtd, loff_t ofs, size_t len); + + /* Power Management functions */ + int (*suspend) (struct mtd_info *mtd); + void (*resume) (struct mtd_info *mtd); + + /* Bad block management functions */ + int (*block_isbad) (struct mtd_info *mtd, loff_t ofs); + int (*block_markbad) (struct mtd_info *mtd, loff_t ofs); + + void *priv; + + struct module *owner; + int usecount; +}; + + + /* Kernel-side ioctl definitions */ + +extern int add_mtd_device(struct mtd_info *mtd); +extern int del_mtd_device (struct mtd_info *mtd); + +extern struct mtd_info *get_mtd_device(struct mtd_info *mtd, int num); + +extern void put_mtd_device(struct mtd_info *mtd); + + +struct mtd_notifier { + void (*add)(struct mtd_info *mtd); + void (*remove)(struct mtd_info *mtd); + struct list_head list; +}; + + +extern void register_mtd_user (struct mtd_notifier *new); +extern int unregister_mtd_user (struct mtd_notifier *old); + +int default_mtd_writev(struct mtd_info *mtd, const struct kvec *vecs, + unsigned long count, loff_t to, size_t *retlen); + +int default_mtd_readv(struct mtd_info *mtd, struct kvec *vecs, + unsigned long count, loff_t from, size_t *retlen); + +#define MTD_ERASE(mtd, args...) (*(mtd->erase))(mtd, args) +#define MTD_POINT(mtd, a,b,c,d) (*(mtd->point))(mtd, a,b,c, (u_char **)(d)) +#define MTD_UNPOINT(mtd, arg) (*(mtd->unpoint))(mtd, (u_char *)arg) +#define MTD_READ(mtd, args...) (*(mtd->read))(mtd, args) +#define MTD_WRITE(mtd, args...) (*(mtd->write))(mtd, args) +#define MTD_READV(mtd, args...) (*(mtd->readv))(mtd, args) +#define MTD_WRITEV(mtd, args...) (*(mtd->writev))(mtd, args) +#define MTD_READECC(mtd, args...) (*(mtd->read_ecc))(mtd, args) +#define MTD_WRITEECC(mtd, args...) (*(mtd->write_ecc))(mtd, args) +#define MTD_READOOB(mtd, args...) (*(mtd->read_oob))(mtd, args) +#define MTD_WRITEOOB(mtd, args...) (*(mtd->write_oob))(mtd, args) +#define MTD_SYNC(mtd) do { if (mtd->sync) (*(mtd->sync))(mtd); } while (0) + + +#ifdef CONFIG_MTD_PARTITIONS +void mtd_erase_callback(struct erase_info *instr); +#else +static inline void mtd_erase_callback(struct erase_info *instr) +{ + if (instr->callback) + instr->callback(instr); +} +#endif + +/* + * Debugging macro and defines + */ +#define MTD_DEBUG_LEVEL0 (0) /* Quiet */ +#define MTD_DEBUG_LEVEL1 (1) /* Audible */ +#define MTD_DEBUG_LEVEL2 (2) /* Loud */ +#define MTD_DEBUG_LEVEL3 (3) /* Noisy */ + +#ifdef CONFIG_MTD_DEBUG +#define DEBUG(n, args...) \ + do { \ + if (n <= CONFIG_MTD_DEBUG_VERBOSE) \ + printk(KERN_INFO args); \ + } while(0) +#else /* CONFIG_MTD_DEBUG */ +#define DEBUG(n, args...) do { } while(0) + +#endif /* CONFIG_MTD_DEBUG */ + +#endif /* __MTD_MTD_H__ */ diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h new file mode 100644 index 0000000..9a19c65 --- /dev/null +++ b/include/linux/mtd/nand.h @@ -0,0 +1,469 @@ +/* + * linux/include/linux/mtd/nand.h + * + * Copyright (c) 2000 David Woodhouse + * Steven J. Hill + * Thomas Gleixner + * + * $Id: nand.h,v 1.68 2004/11/12 10:40:37 gleixner Exp $ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Info: + * Contains standard defines and IDs for NAND flash devices + * + * Changelog: + * 01-31-2000 DMW Created + * 09-18-2000 SJH Moved structure out of the Disk-On-Chip drivers + * so it can be used by other NAND flash device + * drivers. I also changed the copyright since none + * of the original contents of this file are specific + * to DoC devices. David can whack me with a baseball + * bat later if I did something naughty. + * 10-11-2000 SJH Added private NAND flash structure for driver + * 10-24-2000 SJH Added prototype for 'nand_scan' function + * 10-29-2001 TG changed nand_chip structure to support + * hardwarespecific function for accessing control lines + * 02-21-2002 TG added support for different read/write adress and + * ready/busy line access function + * 02-26-2002 TG added chip_delay to nand_chip structure to optimize + * command delay times for different chips + * 04-28-2002 TG OOB config defines moved from nand.c to avoid duplicate + * defines in jffs2/wbuf.c + * 08-07-2002 TG forced bad block location to byte 5 of OOB, even if + * CONFIG_MTD_NAND_ECC_JFFS2 is not set + * 08-10-2002 TG extensions to nand_chip structure to support HW-ECC + * + * 08-29-2002 tglx nand_chip structure: data_poi for selecting + * internal / fs-driver buffer + * support for 6byte/512byte hardware ECC + * read_ecc, write_ecc extended for different oob-layout + * oob layout selections: NAND_NONE_OOB, NAND_JFFS2_OOB, + * NAND_YAFFS_OOB + * 11-25-2002 tglx Added Manufacturer code FUJITSU, NATIONAL + * Split manufacturer and device ID structures + * + * 02-08-2004 tglx added option field to nand structure for chip anomalities + * 05-25-2004 tglx added bad block table support, ST-MICRO manufacturer id + * update of nand_chip structure description + */ +#ifndef __LINUX_MTD_NAND_H +#define __LINUX_MTD_NAND_H + +#include +#include +#include +#include + +struct mtd_info; +/* Scan and identify a NAND device */ +extern int nand_scan (struct mtd_info *mtd, int max_chips); +/* Free resources held by the NAND device */ +extern void nand_release (struct mtd_info *mtd); + +/* Read raw data from the device without ECC */ +extern int nand_read_raw (struct mtd_info *mtd, uint8_t *buf, loff_t from, size_t len, size_t ooblen); + + +/* The maximum number of NAND chips in an array */ +#define NAND_MAX_CHIPS 8 + +/* This constant declares the max. oobsize / page, which + * is supported now. If you add a chip with bigger oobsize/page + * adjust this accordingly. + */ +#define NAND_MAX_OOBSIZE 64 + +/* + * Constants for hardware specific CLE/ALE/NCE function +*/ +/* Select the chip by setting nCE to low */ +#define NAND_CTL_SETNCE 1 +/* Deselect the chip by setting nCE to high */ +#define NAND_CTL_CLRNCE 2 +/* Select the command latch by setting CLE to high */ +#define NAND_CTL_SETCLE 3 +/* Deselect the command latch by setting CLE to low */ +#define NAND_CTL_CLRCLE 4 +/* Select the address latch by setting ALE to high */ +#define NAND_CTL_SETALE 5 +/* Deselect the address latch by setting ALE to low */ +#define NAND_CTL_CLRALE 6 +/* Set write protection by setting WP to high. Not used! */ +#define NAND_CTL_SETWP 7 +/* Clear write protection by setting WP to low. Not used! */ +#define NAND_CTL_CLRWP 8 + +/* + * Standard NAND flash commands + */ +#define NAND_CMD_READ0 0 +#define NAND_CMD_READ1 1 +#define NAND_CMD_PAGEPROG 0x10 +#define NAND_CMD_READOOB 0x50 +#define NAND_CMD_ERASE1 0x60 +#define NAND_CMD_STATUS 0x70 +#define NAND_CMD_STATUS_MULTI 0x71 +#define NAND_CMD_SEQIN 0x80 +#define NAND_CMD_READID 0x90 +#define NAND_CMD_ERASE2 0xd0 +#define NAND_CMD_RESET 0xff + +/* Extended commands for large page devices */ +#define NAND_CMD_READSTART 0x30 +#define NAND_CMD_CACHEDPROG 0x15 + +/* Status bits */ +#define NAND_STATUS_FAIL 0x01 +#define NAND_STATUS_FAIL_N1 0x02 +#define NAND_STATUS_TRUE_READY 0x20 +#define NAND_STATUS_READY 0x40 +#define NAND_STATUS_WP 0x80 + +/* + * Constants for ECC_MODES + */ + +/* No ECC. Usage is not recommended ! */ +#define NAND_ECC_NONE 0 +/* Software ECC 3 byte ECC per 256 Byte data */ +#define NAND_ECC_SOFT 1 +/* Hardware ECC 3 byte ECC per 256 Byte data */ +#define NAND_ECC_HW3_256 2 +/* Hardware ECC 3 byte ECC per 512 Byte data */ +#define NAND_ECC_HW3_512 3 +/* Hardware ECC 3 byte ECC per 512 Byte data */ +#define NAND_ECC_HW6_512 4 +/* Hardware ECC 8 byte ECC per 512 Byte data */ +#define NAND_ECC_HW8_512 6 +/* Hardware ECC 12 byte ECC per 2048 Byte data */ +#define NAND_ECC_HW12_2048 7 + +/* + * Constants for Hardware ECC +*/ +/* Reset Hardware ECC for read */ +#define NAND_ECC_READ 0 +/* Reset Hardware ECC for write */ +#define NAND_ECC_WRITE 1 +/* Enable Hardware ECC before syndrom is read back from flash */ +#define NAND_ECC_READSYN 2 + +/* Option constants for bizarre disfunctionality and real +* features +*/ +/* Chip can not auto increment pages */ +#define NAND_NO_AUTOINCR 0x00000001 +/* Buswitdh is 16 bit */ +#define NAND_BUSWIDTH_16 0x00000002 +/* Device supports partial programming without padding */ +#define NAND_NO_PADDING 0x00000004 +/* Chip has cache program function */ +#define NAND_CACHEPRG 0x00000008 +/* Chip has copy back function */ +#define NAND_COPYBACK 0x00000010 +/* AND Chip which has 4 banks and a confusing page / block + * assignment. See Renesas datasheet for further information */ +#define NAND_IS_AND 0x00000020 +/* Chip has a array of 4 pages which can be read without + * additional ready /busy waits */ +#define NAND_4PAGE_ARRAY 0x00000040 + +/* Options valid for Samsung large page devices */ +#define NAND_SAMSUNG_LP_OPTIONS \ + (NAND_NO_PADDING | NAND_CACHEPRG | NAND_COPYBACK) + +/* Macros to identify the above */ +#define NAND_CANAUTOINCR(chip) (!(chip->options & NAND_NO_AUTOINCR)) +#define NAND_MUST_PAD(chip) (!(chip->options & NAND_NO_PADDING)) +#define NAND_HAS_CACHEPROG(chip) ((chip->options & NAND_CACHEPRG)) +#define NAND_HAS_COPYBACK(chip) ((chip->options & NAND_COPYBACK)) + +/* Mask to zero out the chip options, which come from the id table */ +#define NAND_CHIPOPTIONS_MSK (0x0000ffff & ~NAND_NO_AUTOINCR) + +/* Non chip related options */ +/* Use a flash based bad block table. This option is passed to the + * default bad block table function. */ +#define NAND_USE_FLASH_BBT 0x00010000 +/* The hw ecc generator provides a syndrome instead a ecc value on read + * This can only work if we have the ecc bytes directly behind the + * data bytes. Applies for DOC and AG-AND Renesas HW Reed Solomon generators */ +#define NAND_HWECC_SYNDROME 0x00020000 + + +/* Options set by nand scan */ +/* Nand scan has allocated oob_buf */ +#define NAND_OOBBUF_ALLOC 0x40000000 +/* Nand scan has allocated data_buf */ +#define NAND_DATABUF_ALLOC 0x80000000 + + +/* + * nand_state_t - chip states + * Enumeration for NAND flash chip state + */ +typedef enum { + FL_READY, + FL_READING, + FL_WRITING, + FL_ERASING, + FL_SYNCING, + FL_CACHEDPRG, +} nand_state_t; + +/* Keep gcc happy */ +struct nand_chip; + +/** + * struct nand_hw_control - Control structure for hardware controller (e.g ECC generator) shared among independend devices + * @lock: protection lock + * @active: the mtd device which holds the controller currently + */ +struct nand_hw_control { + spinlock_t lock; + struct nand_chip *active; +}; + +/** + * struct nand_chip - NAND Private Flash Chip Data + * @IO_ADDR_R: [BOARDSPECIFIC] address to read the 8 I/O lines of the flash device + * @IO_ADDR_W: [BOARDSPECIFIC] address to write the 8 I/O lines of the flash device + * @read_byte: [REPLACEABLE] read one byte from the chip + * @write_byte: [REPLACEABLE] write one byte to the chip + * @read_word: [REPLACEABLE] read one word from the chip + * @write_word: [REPLACEABLE] write one word to the chip + * @write_buf: [REPLACEABLE] write data from the buffer to the chip + * @read_buf: [REPLACEABLE] read data from the chip into the buffer + * @verify_buf: [REPLACEABLE] verify buffer contents against the chip data + * @select_chip: [REPLACEABLE] select chip nr + * @block_bad: [REPLACEABLE] check, if the block is bad + * @block_markbad: [REPLACEABLE] mark the block bad + * @hwcontrol: [BOARDSPECIFIC] hardwarespecific function for accesing control-lines + * @dev_ready: [BOARDSPECIFIC] hardwarespecific function for accesing device ready/busy line + * If set to NULL no access to ready/busy is available and the ready/busy information + * is read from the chip status register + * @cmdfunc: [REPLACEABLE] hardwarespecific function for writing commands to the chip + * @waitfunc: [REPLACEABLE] hardwarespecific function for wait on ready + * @calculate_ecc: [REPLACEABLE] function for ecc calculation or readback from ecc hardware + * @correct_data: [REPLACEABLE] function for ecc correction, matching to ecc generator (sw/hw) + * @enable_hwecc: [BOARDSPECIFIC] function to enable (reset) hardware ecc generator. Must only + * be provided if a hardware ECC is available + * @erase_cmd: [INTERN] erase command write function, selectable due to AND support + * @scan_bbt: [REPLACEABLE] function to scan bad block table + * @eccmode: [BOARDSPECIFIC] mode of ecc, see defines + * @eccsize: [INTERN] databytes used per ecc-calculation + * @eccbytes: [INTERN] number of ecc bytes per ecc-calculation step + * @eccsteps: [INTERN] number of ecc calculation steps per page + * @chip_delay: [BOARDSPECIFIC] chip dependent delay for transfering data from array to read regs (tR) + * @chip_lock: [INTERN] spinlock used to protect access to this structure and the chip + * @wq: [INTERN] wait queue to sleep on if a NAND operation is in progress + * @state: [INTERN] the current state of the NAND device + * @page_shift: [INTERN] number of address bits in a page (column address bits) + * @phys_erase_shift: [INTERN] number of address bits in a physical eraseblock + * @bbt_erase_shift: [INTERN] number of address bits in a bbt entry + * @chip_shift: [INTERN] number of address bits in one chip + * @data_buf: [INTERN] internal buffer for one page + oob + * @oob_buf: [INTERN] oob buffer for one eraseblock + * @oobdirty: [INTERN] indicates that oob_buf must be reinitialized + * @data_poi: [INTERN] pointer to a data buffer + * @options: [BOARDSPECIFIC] various chip options. They can partly be set to inform nand_scan about + * special functionality. See the defines for further explanation + * @badblockpos: [INTERN] position of the bad block marker in the oob area + * @numchips: [INTERN] number of physical chips + * @chipsize: [INTERN] the size of one chip for multichip arrays + * @pagemask: [INTERN] page number mask = number of (pages / chip) - 1 + * @pagebuf: [INTERN] holds the pagenumber which is currently in data_buf + * @autooob: [REPLACEABLE] the default (auto)placement scheme + * @bbt: [INTERN] bad block table pointer + * @bbt_td: [REPLACEABLE] bad block table descriptor for flash lookup + * @bbt_md: [REPLACEABLE] bad block table mirror descriptor + * @badblock_pattern: [REPLACEABLE] bad block scan pattern used for initial bad block scan + * @controller: [OPTIONAL] a pointer to a hardware controller structure which is shared among multiple independend devices + * @priv: [OPTIONAL] pointer to private chip date + */ + +struct nand_chip { + void __iomem *IO_ADDR_R; + void __iomem *IO_ADDR_W; + + u_char (*read_byte)(struct mtd_info *mtd); + void (*write_byte)(struct mtd_info *mtd, u_char byte); + u16 (*read_word)(struct mtd_info *mtd); + void (*write_word)(struct mtd_info *mtd, u16 word); + + void (*write_buf)(struct mtd_info *mtd, const u_char *buf, int len); + void (*read_buf)(struct mtd_info *mtd, u_char *buf, int len); + int (*verify_buf)(struct mtd_info *mtd, const u_char *buf, int len); + void (*select_chip)(struct mtd_info *mtd, int chip); + int (*block_bad)(struct mtd_info *mtd, loff_t ofs, int getchip); + int (*block_markbad)(struct mtd_info *mtd, loff_t ofs); + void (*hwcontrol)(struct mtd_info *mtd, int cmd); + int (*dev_ready)(struct mtd_info *mtd); + void (*cmdfunc)(struct mtd_info *mtd, unsigned command, int column, int page_addr); + int (*waitfunc)(struct mtd_info *mtd, struct nand_chip *this, int state); + int (*calculate_ecc)(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code); + int (*correct_data)(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc); + void (*enable_hwecc)(struct mtd_info *mtd, int mode); + void (*erase_cmd)(struct mtd_info *mtd, int page); + int (*scan_bbt)(struct mtd_info *mtd); + int eccmode; + int eccsize; + int eccbytes; + int eccsteps; + int chip_delay; + spinlock_t chip_lock; + wait_queue_head_t wq; + nand_state_t state; + int page_shift; + int phys_erase_shift; + int bbt_erase_shift; + int chip_shift; + u_char *data_buf; + u_char *oob_buf; + int oobdirty; + u_char *data_poi; + unsigned int options; + int badblockpos; + int numchips; + unsigned long chipsize; + int pagemask; + int pagebuf; + struct nand_oobinfo *autooob; + uint8_t *bbt; + struct nand_bbt_descr *bbt_td; + struct nand_bbt_descr *bbt_md; + struct nand_bbt_descr *badblock_pattern; + struct nand_hw_control *controller; + void *priv; +}; + +/* + * NAND Flash Manufacturer ID Codes + */ +#define NAND_MFR_TOSHIBA 0x98 +#define NAND_MFR_SAMSUNG 0xec +#define NAND_MFR_FUJITSU 0x04 +#define NAND_MFR_NATIONAL 0x8f +#define NAND_MFR_RENESAS 0x07 +#define NAND_MFR_STMICRO 0x20 + +/** + * struct nand_flash_dev - NAND Flash Device ID Structure + * + * @name: Identify the device type + * @id: device ID code + * @pagesize: Pagesize in bytes. Either 256 or 512 or 0 + * If the pagesize is 0, then the real pagesize + * and the eraseize are determined from the + * extended id bytes in the chip + * @erasesize: Size of an erase block in the flash device. + * @chipsize: Total chipsize in Mega Bytes + * @options: Bitfield to store chip relevant options + */ +struct nand_flash_dev { + char *name; + int id; + unsigned long pagesize; + unsigned long chipsize; + unsigned long erasesize; + unsigned long options; +}; + +/** + * struct nand_manufacturers - NAND Flash Manufacturer ID Structure + * @name: Manufacturer name + * @id: manufacturer ID code of device. +*/ +struct nand_manufacturers { + int id; + char * name; +}; + +extern struct nand_flash_dev nand_flash_ids[]; +extern struct nand_manufacturers nand_manuf_ids[]; + +/** + * struct nand_bbt_descr - bad block table descriptor + * @options: options for this descriptor + * @pages: the page(s) where we find the bbt, used with option BBT_ABSPAGE + * when bbt is searched, then we store the found bbts pages here. + * Its an array and supports up to 8 chips now + * @offs: offset of the pattern in the oob area of the page + * @veroffs: offset of the bbt version counter in the oob are of the page + * @version: version read from the bbt page during scan + * @len: length of the pattern, if 0 no pattern check is performed + * @maxblocks: maximum number of blocks to search for a bbt. This number of + * blocks is reserved at the end of the device where the tables are + * written. + * @reserved_block_code: if non-0, this pattern denotes a reserved (rather than + * bad) block in the stored bbt + * @pattern: pattern to identify bad block table or factory marked good / + * bad blocks, can be NULL, if len = 0 + * + * Descriptor for the bad block table marker and the descriptor for the + * pattern which identifies good and bad blocks. The assumption is made + * that the pattern and the version count are always located in the oob area + * of the first block. + */ +struct nand_bbt_descr { + int options; + int pages[NAND_MAX_CHIPS]; + int offs; + int veroffs; + uint8_t version[NAND_MAX_CHIPS]; + int len; + int maxblocks; + int reserved_block_code; + uint8_t *pattern; +}; + +/* Options for the bad block table descriptors */ + +/* The number of bits used per block in the bbt on the device */ +#define NAND_BBT_NRBITS_MSK 0x0000000F +#define NAND_BBT_1BIT 0x00000001 +#define NAND_BBT_2BIT 0x00000002 +#define NAND_BBT_4BIT 0x00000004 +#define NAND_BBT_8BIT 0x00000008 +/* The bad block table is in the last good block of the device */ +#define NAND_BBT_LASTBLOCK 0x00000010 +/* The bbt is at the given page, else we must scan for the bbt */ +#define NAND_BBT_ABSPAGE 0x00000020 +/* The bbt is at the given page, else we must scan for the bbt */ +#define NAND_BBT_SEARCH 0x00000040 +/* bbt is stored per chip on multichip devices */ +#define NAND_BBT_PERCHIP 0x00000080 +/* bbt has a version counter at offset veroffs */ +#define NAND_BBT_VERSION 0x00000100 +/* Create a bbt if none axists */ +#define NAND_BBT_CREATE 0x00000200 +/* Search good / bad pattern through all pages of a block */ +#define NAND_BBT_SCANALLPAGES 0x00000400 +/* Scan block empty during good / bad block scan */ +#define NAND_BBT_SCANEMPTY 0x00000800 +/* Write bbt if neccecary */ +#define NAND_BBT_WRITE 0x00001000 +/* Read and write back block contents when writing bbt */ +#define NAND_BBT_SAVECONTENT 0x00002000 +/* Search good / bad pattern on the first and the second page */ +#define NAND_BBT_SCAN2NDPAGE 0x00004000 + +/* The maximum number of blocks to scan for a bbt */ +#define NAND_BBT_SCAN_MAXBLOCKS 4 + +extern int nand_scan_bbt (struct mtd_info *mtd, struct nand_bbt_descr *bd); +extern int nand_update_bbt (struct mtd_info *mtd, loff_t offs); +extern int nand_default_bbt (struct mtd_info *mtd); +extern int nand_isbad_bbt (struct mtd_info *mtd, loff_t offs, int allowbbt); +extern int nand_erase_nand (struct mtd_info *mtd, struct erase_info *instr, int allowbbt); + +/* +* Constants for oob configuration +*/ +#define NAND_SMALL_BADBLOCK_POS 5 +#define NAND_LARGE_BADBLOCK_POS 0 + +#endif /* __LINUX_MTD_NAND_H */ diff --git a/include/linux/mtd/nand_ecc.h b/include/linux/mtd/nand_ecc.h new file mode 100644 index 0000000..12c5bc3 --- /dev/null +++ b/include/linux/mtd/nand_ecc.h @@ -0,0 +1,30 @@ +/* + * drivers/mtd/nand_ecc.h + * + * Copyright (C) 2000 Steven J. Hill (sjhill@realitydiluted.com) + * + * $Id: nand_ecc.h,v 1.4 2004/06/17 02:35:02 dbrown Exp $ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This file is the header for the ECC algorithm. + */ + +#ifndef __MTD_NAND_ECC_H__ +#define __MTD_NAND_ECC_H__ + +struct mtd_info; + +/* + * Calculate 3 byte ECC code for 256 byte block + */ +int nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code); + +/* + * Detect and correct a 1 bit error for 256 byte block + */ +int nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc); + +#endif /* __MTD_NAND_ECC_H__ */ diff --git a/include/linux/mtd/nftl.h b/include/linux/mtd/nftl.h new file mode 100644 index 0000000..d35d2c2 --- /dev/null +++ b/include/linux/mtd/nftl.h @@ -0,0 +1,54 @@ +/* + * $Id: nftl.h,v 1.16 2004/06/30 14:49:00 dbrown Exp $ + * + * (C) 1999-2003 David Woodhouse + */ + +#ifndef __MTD_NFTL_H__ +#define __MTD_NFTL_H__ + +#include +#include + +#include + +/* these info are used in ReplUnitTable */ +#define BLOCK_NIL 0xffff /* last block of a chain */ +#define BLOCK_FREE 0xfffe /* free block */ +#define BLOCK_NOTEXPLORED 0xfffd /* non explored block, only used during mounting */ +#define BLOCK_RESERVED 0xfffc /* bios block or bad block */ + +struct NFTLrecord { + struct mtd_blktrans_dev mbd; + __u16 MediaUnit, SpareMediaUnit; + __u32 EraseSize; + struct NFTLMediaHeader MediaHdr; + int usecount; + unsigned char heads; + unsigned char sectors; + unsigned short cylinders; + __u16 numvunits; + __u16 lastEUN; /* should be suppressed */ + __u16 numfreeEUNs; + __u16 LastFreeEUN; /* To speed up finding a free EUN */ + int head,sect,cyl; + __u16 *EUNtable; /* [numvunits]: First EUN for each virtual unit */ + __u16 *ReplUnitTable; /* [numEUNs]: ReplUnitNumber for each */ + unsigned int nb_blocks; /* number of physical blocks */ + unsigned int nb_boot_blocks; /* number of blocks used by the bios */ + struct erase_info instr; + struct nand_oobinfo oobinfo; +}; + +int NFTL_mount(struct NFTLrecord *s); +int NFTL_formatblock(struct NFTLrecord *s, int block); + +#ifndef NFTL_MAJOR +#define NFTL_MAJOR 93 +#endif + +#define MAX_NFTLS 16 +#define MAX_SECTORS_PER_UNIT 64 +#define NFTL_PARTN_BITS 4 + +#endif /* __MTD_NFTL_H__ */ diff --git a/include/linux/mtd/partitions.h b/include/linux/mtd/partitions.h new file mode 100644 index 0000000..50b2edf --- /dev/null +++ b/include/linux/mtd/partitions.h @@ -0,0 +1,75 @@ +/* + * MTD partitioning layer definitions + * + * (C) 2000 Nicolas Pitre + * + * This code is GPL + * + * $Id: partitions.h,v 1.16 2004/11/16 18:34:40 dwmw2 Exp $ + */ + +#ifndef MTD_PARTITIONS_H +#define MTD_PARTITIONS_H + +#include + + +/* + * Partition definition structure: + * + * An array of struct partition is passed along with a MTD object to + * add_mtd_partitions() to create them. + * + * For each partition, these fields are available: + * name: string that will be used to label the partition's MTD device. + * size: the partition size; if defined as MTDPART_SIZ_FULL, the partition + * will extend to the end of the master MTD device. + * offset: absolute starting position within the master MTD device; if + * defined as MTDPART_OFS_APPEND, the partition will start where the + * previous one ended; if MTDPART_OFS_NXTBLK, at the next erase block. + * mask_flags: contains flags that have to be masked (removed) from the + * master MTD flag set for the corresponding MTD partition. + * For example, to force a read-only partition, simply adding + * MTD_WRITEABLE to the mask_flags will do the trick. + * + * Note: writeable partitions require their size and offset be + * erasesize aligned (e.g. use MTDPART_OFS_NEXTBLK). + */ + +struct mtd_partition { + char *name; /* identifier string */ + u_int32_t size; /* partition size */ + u_int32_t offset; /* offset within the master MTD space */ + u_int32_t mask_flags; /* master MTD flags to mask out for this partition */ + struct nand_oobinfo *oobsel; /* out of band layout for this partition (NAND only)*/ + struct mtd_info **mtdp; /* pointer to store the MTD object */ +}; + +#define MTDPART_OFS_NXTBLK (-2) +#define MTDPART_OFS_APPEND (-1) +#define MTDPART_SIZ_FULL (0) + + +int add_mtd_partitions(struct mtd_info *, const struct mtd_partition *, int); +int del_mtd_partitions(struct mtd_info *); + +/* + * Functions dealing with the various ways of partitioning the space + */ + +struct mtd_part_parser { + struct list_head list; + struct module *owner; + const char *name; + int (*parse_fn)(struct mtd_info *, struct mtd_partition **, unsigned long); +}; + +extern int register_mtd_parser(struct mtd_part_parser *parser); +extern int deregister_mtd_parser(struct mtd_part_parser *parser); +extern int parse_mtd_partitions(struct mtd_info *master, const char **types, + struct mtd_partition **pparts, unsigned long origin); + +#define put_partition_parser(p) do { module_put((p)->owner); } while(0) + +#endif + diff --git a/include/linux/mtd/physmap.h b/include/linux/mtd/physmap.h new file mode 100644 index 0000000..05aa4970 --- /dev/null +++ b/include/linux/mtd/physmap.h @@ -0,0 +1,61 @@ +/* + * For boards with physically mapped flash and using + * drivers/mtd/maps/physmap.c mapping driver. + * + * $Id: physmap.h,v 1.3 2004/07/21 00:16:15 jwboyer Exp $ + * + * Copyright (C) 2003 MontaVista Software Inc. + * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + */ + +#ifndef __LINUX_MTD_PHYSMAP__ + +#include + +#if defined(CONFIG_MTD_PHYSMAP) + +#include +#include +#include + +/* + * The map_info for physmap. Board can override size, buswidth, phys, + * (*set_vpp)(), etc in their initial setup routine. + */ +extern struct map_info physmap_map; + +/* + * Board needs to specify the exact mapping during their setup time. + */ +static inline void physmap_configure(unsigned long addr, unsigned long size, int bankwidth, void (*set_vpp)(struct map_info *, int) ) +{ + physmap_map.phys = addr; + physmap_map.size = size; + physmap_map.bankwidth = bankwidth; + physmap_map.set_vpp = set_vpp; +} + +#if defined(CONFIG_MTD_PARTITIONS) + +/* + * Machines that wish to do flash partition may want to call this function in + * their setup routine. + * + * physmap_set_partitions(mypartitions, num_parts); + * + * Note that one can always override this hard-coded partition with + * command line partition (you need to enable CONFIG_MTD_CMDLINE_PARTS). + */ +void physmap_set_partitions(struct mtd_partition *parts, int num_parts); + +#endif /* defined(CONFIG_MTD_PARTITIONS) */ +#endif /* defined(CONFIG_MTD) */ + +#endif /* __LINUX_MTD_PHYSMAP__ */ + diff --git a/include/linux/mtd/pmc551.h b/include/linux/mtd/pmc551.h new file mode 100644 index 0000000..113e308 --- /dev/null +++ b/include/linux/mtd/pmc551.h @@ -0,0 +1,79 @@ +/* + * $Id: pmc551.h,v 1.5 2003/01/24 16:49:53 dwmw2 Exp $ + * + * PMC551 PCI Mezzanine Ram Device + * + * Author: + * Mark Ferrell + * Copyright 1999,2000 Nortel Networks + * + * License: + * As part of this driver was derrived from the slram.c driver it falls + * under the same license, which is GNU General Public License v2 + */ + +#ifndef __MTD_PMC551_H__ +#define __MTD_PMC551_H__ + +#include + +#define PMC551_VERSION "$Id: pmc551.h,v 1.5 2003/01/24 16:49:53 dwmw2 Exp $\n"\ + "Ramix PMC551 PCI Mezzanine Ram Driver. (C) 1999,2000 Nortel Networks.\n" + +/* + * Our personal and private information + */ +struct mypriv { + struct pci_dev *dev; + u_char *start; + u32 base_map0; + u32 curr_map0; + u32 asize; + struct mtd_info *nextpmc551; +}; + +/* + * Function Prototypes + */ +static int pmc551_erase(struct mtd_info *, struct erase_info *); +static void pmc551_unpoint(struct mtd_info *, u_char *, loff_t, size_t); +static int pmc551_point (struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, u_char **mtdbuf); +static int pmc551_read(struct mtd_info *, loff_t, size_t, size_t *, u_char *); +static int pmc551_write(struct mtd_info *, loff_t, size_t, size_t *, const u_char *); + + +/* + * Define the PCI ID's if the kernel doesn't define them for us + */ +#ifndef PCI_VENDOR_ID_V3_SEMI +#define PCI_VENDOR_ID_V3_SEMI 0x11b0 +#endif + +#ifndef PCI_DEVICE_ID_V3_SEMI_V370PDC +#define PCI_DEVICE_ID_V3_SEMI_V370PDC 0x0200 +#endif + + +#define PMC551_PCI_MEM_MAP0 0x50 +#define PMC551_PCI_MEM_MAP1 0x54 +#define PMC551_PCI_MEM_MAP_MAP_ADDR_MASK 0x3ff00000 +#define PMC551_PCI_MEM_MAP_APERTURE_MASK 0x000000f0 +#define PMC551_PCI_MEM_MAP_REG_EN 0x00000002 +#define PMC551_PCI_MEM_MAP_ENABLE 0x00000001 + +#define PMC551_SDRAM_MA 0x60 +#define PMC551_SDRAM_CMD 0x62 +#define PMC551_DRAM_CFG 0x64 +#define PMC551_SYS_CTRL_REG 0x78 + +#define PMC551_DRAM_BLK0 0x68 +#define PMC551_DRAM_BLK1 0x6c +#define PMC551_DRAM_BLK2 0x70 +#define PMC551_DRAM_BLK3 0x74 +#define PMC551_DRAM_BLK_GET_SIZE(x) (524288<<((x>>4)&0x0f)) +#define PMC551_DRAM_BLK_SET_COL_MUX(x,v) (((x) & ~0x00007000) | (((v) & 0x7) << 12)) +#define PMC551_DRAM_BLK_SET_ROW_MUX(x,v) (((x) & ~0x00000f00) | (((v) & 0xf) << 8)) + + +#endif /* __MTD_PMC551_H__ */ + diff --git a/include/linux/mtd/xip.h b/include/linux/mtd/xip.h new file mode 100644 index 0000000..fc07112 --- /dev/null +++ b/include/linux/mtd/xip.h @@ -0,0 +1,107 @@ +/* + * MTD primitives for XIP support + * + * Author: Nicolas Pitre + * Created: Nov 2, 2004 + * Copyright: (C) 2004 MontaVista Software, Inc. + * + * This XIP support for MTD has been loosely inspired + * by an earlier patch authored by David Woodhouse. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * $Id: xip.h,v 1.2 2004/12/01 15:49:10 nico Exp $ + */ + +#ifndef __LINUX_MTD_XIP_H__ +#define __LINUX_MTD_XIP_H__ + +#include + +#ifdef CONFIG_MTD_XIP + +/* + * Function that are modifying the flash state away from array mode must + * obviously not be running from flash. The __xipram is therefore marking + * those functions so they get relocated to ram. + */ +#define __xipram __attribute__ ((__section__ (".data"))) + +/* + * We really don't want gcc to guess anything. + * We absolutely _need_ proper inlining. + */ +#include + +/* + * Each architecture has to provide the following macros. They must access + * the hardware directly and not rely on any other (XIP) functions since they + * won't be available when used (flash not in array mode). + * + * xip_irqpending() + * + * return non zero when any hardware interrupt is pending. + * + * xip_currtime() + * + * return a platform specific time reference to be used with + * xip_elapsed_since(). + * + * xip_elapsed_since(x) + * + * return in usecs the elapsed timebetween now and the reference x as + * returned by xip_currtime(). + * + * note 1: convertion to usec can be approximated, as long as the + * returned value is <= the real elapsed time. + * note 2: this should be able to cope with a few seconds without + * overflowing. + */ + +#if defined(CONFIG_ARCH_SA1100) || defined(CONFIG_ARCH_PXA) + +#include +#ifdef CONFIG_ARCH_PXA +#include +#endif + +#define xip_irqpending() (ICIP & ICMR) + +/* we sample OSCR and convert desired delta to usec (1/4 ~= 1000000/3686400) */ +#define xip_currtime() (OSCR) +#define xip_elapsed_since(x) (signed)((OSCR - (x)) / 4) + +#else + +#warning "missing IRQ and timer primitives for XIP MTD support" +#warning "some of the XIP MTD support code will be disabled" +#warning "your system will therefore be unresponsive when writing or erasing flash" + +#define xip_irqpending() (0) +#define xip_currtime() (0) +#define xip_elapsed_since(x) (0) + +#endif + +/* + * xip_cpu_idle() is used when waiting for a delay equal or larger than + * the system timer tick period. This should put the CPU into idle mode + * to save power and to be woken up only when some interrupts are pending. + * As above, this should not rely upon standard kernel code. + */ + +#if defined(CONFIG_CPU_XSCALE) +#define xip_cpu_idle() asm volatile ("mcr p14, 0, %0, c7, c0, 0" :: "r" (1)) +#else +#define xip_cpu_idle() do { } while (0) +#endif + +#else + +#define __xipram + +#endif /* CONFIG_MTD_XIP */ + +#endif /* __LINUX_MTD_XIP_H__ */ -- cgit v1.1