From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- include/asm-sparc64/audioio.h | 234 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 234 insertions(+) create mode 100644 include/asm-sparc64/audioio.h (limited to 'include/asm-sparc64/audioio.h') diff --git a/include/asm-sparc64/audioio.h b/include/asm-sparc64/audioio.h new file mode 100644 index 0000000..cf16173 --- /dev/null +++ b/include/asm-sparc64/audioio.h @@ -0,0 +1,234 @@ +/* + * include/asm-sparc/audioio.h + * + * Sparc Audio Midlayer + * Copyright (C) 1996 Thomas K. Dyas (tdyas@noc.rutgers.edu) + */ + +#ifndef _AUDIOIO_H_ +#define _AUDIOIO_H_ + +/* + * SunOS/Solaris /dev/audio interface + */ + +#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) +#include +#include +#include +#endif + +/* + * This structure contains state information for audio device IO streams. + */ +typedef struct audio_prinfo { + /* + * The following values describe the audio data encoding. + */ + unsigned int sample_rate; /* samples per second */ + unsigned int channels; /* number of interleaved channels */ + unsigned int precision; /* bit-width of each sample */ + unsigned int encoding; /* data encoding method */ + + /* + * The following values control audio device configuration + */ + unsigned int gain; /* gain level: 0 - 255 */ + unsigned int port; /* selected I/O port (see below) */ + unsigned int avail_ports; /* available I/O ports (see below) */ + unsigned int _xxx[2]; /* Reserved for future use */ + + unsigned int buffer_size; /* I/O buffer size */ + + /* + * The following values describe driver state + */ + unsigned int samples; /* number of samples converted */ + unsigned int eof; /* End Of File counter (play only) */ + + unsigned char pause; /* non-zero for pause, zero to resume */ + unsigned char error; /* non-zero if overflow/underflow */ + unsigned char waiting; /* non-zero if a process wants access */ + unsigned char balance; /* stereo channel balance */ + + unsigned short minordev; + + /* + * The following values are read-only state flags + */ + unsigned char open; /* non-zero if open access permitted */ + unsigned char active; /* non-zero if I/O is active */ +} audio_prinfo_t; + + +/* + * This structure describes the current state of the audio device. + */ +typedef struct audio_info { + /* + * Per-stream information + */ + audio_prinfo_t play; /* output status information */ + audio_prinfo_t record; /* input status information */ + + /* + * Per-unit/channel information + */ + unsigned int monitor_gain; /* input to output mix: 0 - 255 */ + unsigned char output_muted; /* non-zero if output is muted */ + unsigned char _xxx[3]; /* Reserved for future use */ + unsigned int _yyy[3]; /* Reserved for future use */ +} audio_info_t; + + +/* + * Audio encoding types + */ +#define AUDIO_ENCODING_NONE (0) /* no encoding assigned */ +#define AUDIO_ENCODING_ULAW (1) /* u-law encoding */ +#define AUDIO_ENCODING_ALAW (2) /* A-law encoding */ +#define AUDIO_ENCODING_LINEAR (3) /* Linear PCM encoding */ +#define AUDIO_ENCODING_FLOAT (4) /* IEEE float (-1. <-> +1.) */ +#define AUDIO_ENCODING_DVI (104) /* DVI ADPCM */ +#define AUDIO_ENCODING_LINEAR8 (105) /* 8 bit UNSIGNED */ +#define AUDIO_ENCODING_LINEARLE (106) /* Linear PCM LE encoding */ + +/* + * These ranges apply to record, play, and monitor gain values + */ +#define AUDIO_MIN_GAIN (0) /* minimum gain value */ +#define AUDIO_MAX_GAIN (255) /* maximum gain value */ + +/* + * These values apply to the balance field to adjust channel gain values + */ +#define AUDIO_LEFT_BALANCE (0) /* left channel only */ +#define AUDIO_MID_BALANCE (32) /* equal left/right channel */ +#define AUDIO_RIGHT_BALANCE (64) /* right channel only */ +#define AUDIO_BALANCE_SHIFT (3) + +/* + * Generic minimum/maximum limits for number of channels, both modes + */ +#define AUDIO_MIN_PLAY_CHANNELS (1) +#define AUDIO_MAX_PLAY_CHANNELS (4) +#define AUDIO_MIN_REC_CHANNELS (1) +#define AUDIO_MAX_REC_CHANNELS (4) + +/* + * Generic minimum/maximum limits for sample precision + */ +#define AUDIO_MIN_PLAY_PRECISION (8) +#define AUDIO_MAX_PLAY_PRECISION (32) +#define AUDIO_MIN_REC_PRECISION (8) +#define AUDIO_MAX_REC_PRECISION (32) + +/* + * Define some convenient names for typical audio ports + */ +/* + * output ports (several may be enabled simultaneously) + */ +#define AUDIO_SPEAKER 0x01 /* output to built-in speaker */ +#define AUDIO_HEADPHONE 0x02 /* output to headphone jack */ +#define AUDIO_LINE_OUT 0x04 /* output to line out */ + +/* + * input ports (usually only one at a time) + */ +#define AUDIO_MICROPHONE 0x01 /* input from microphone */ +#define AUDIO_LINE_IN 0x02 /* input from line in */ +#define AUDIO_CD 0x04 /* input from on-board CD inputs */ +#define AUDIO_INTERNAL_CD_IN AUDIO_CD /* input from internal CDROM */ +#define AUDIO_ANALOG_LOOPBACK 0x40 /* input from output */ + + +/* + * This macro initializes an audio_info structure to 'harmless' values. + * Note that (~0) might not be a harmless value for a flag that was + * a signed int. + */ +#define AUDIO_INITINFO(i) { \ + unsigned int *__x__; \ + for (__x__ = (unsigned int *)(i); \ + (char *) __x__ < (((char *)(i)) + sizeof (audio_info_t)); \ + *__x__++ = ~0); \ +} + +/* + * These allow testing for what the user wants to set + */ +#define AUD_INITVALUE (~0) +#define Modify(X) ((unsigned int)(X) != AUD_INITVALUE) +#define Modifys(X) ((X) != (unsigned short)AUD_INITVALUE) +#define Modifyc(X) ((X) != (unsigned char)AUD_INITVALUE) + +/* + * Parameter for the AUDIO_GETDEV ioctl to determine current + * audio devices. + */ +#define MAX_AUDIO_DEV_LEN (16) +typedef struct audio_device { + char name[MAX_AUDIO_DEV_LEN]; + char version[MAX_AUDIO_DEV_LEN]; + char config[MAX_AUDIO_DEV_LEN]; +} audio_device_t; + + +/* + * Ioctl calls for the audio device. + */ + +/* + * AUDIO_GETINFO retrieves the current state of the audio device. + * + * AUDIO_SETINFO copies all fields of the audio_info structure whose + * values are not set to the initialized value (-1) to the device state. + * It performs an implicit AUDIO_GETINFO to return the new state of the + * device. Note that the record.samples and play.samples fields are set + * to the last value before the AUDIO_SETINFO took effect. This allows + * an application to reset the counters while atomically retrieving the + * last value. + * + * AUDIO_DRAIN suspends the calling process until the write buffers are + * empty. + * + * AUDIO_GETDEV returns a structure of type audio_device_t which contains + * three strings. The string "name" is a short identifying string (for + * example, the SBus Fcode name string), the string "version" identifies + * the current version of the device, and the "config" string identifies + * the specific configuration of the audio stream. All fields are + * device-dependent -- see the device specific manual pages for details. + * + * AUDIO_GETDEV_SUNOS returns a number which is an audio device defined + * herein (making it not too portable) + * + * AUDIO_FLUSH stops all playback and recording, clears all queued buffers, + * resets error counters, and restarts recording and playback as appropriate + * for the current sampling mode. + */ +#define AUDIO_GETINFO _IOR('A', 1, audio_info_t) +#define AUDIO_SETINFO _IOWR('A', 2, audio_info_t) +#define AUDIO_DRAIN _IO('A', 3) +#define AUDIO_GETDEV _IOR('A', 4, audio_device_t) +#define AUDIO_GETDEV_SUNOS _IOR('A', 4, int) +#define AUDIO_FLUSH _IO('A', 5) + +/* Define possible audio hardware configurations for + * old SunOS-style AUDIO_GETDEV ioctl */ +#define AUDIO_DEV_UNKNOWN (0) /* not defined */ +#define AUDIO_DEV_AMD (1) /* audioamd device */ +#define AUDIO_DEV_SPEAKERBOX (2) /* dbri device with speakerbox */ +#define AUDIO_DEV_CODEC (3) /* dbri device (internal speaker) */ +#define AUDIO_DEV_CS4231 (5) /* cs4231 device */ + +/* + * The following ioctl sets the audio device into an internal loopback mode, + * if the hardware supports this. The argument is TRUE to set loopback, + * FALSE to reset to normal operation. If the hardware does not support + * internal loopback, the ioctl should fail with EINVAL. + * Causes ADC data to be digitally mixed in and sent to the DAC. + */ +#define AUDIO_DIAG_LOOPBACK _IOW('A', 101, int) + +#endif /* _AUDIOIO_H_ */ -- cgit v1.1