From 51dd249eff28924f838a72a50c417b2089e0f6a9 Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Sun, 4 Feb 2007 22:45:33 +0100
Subject: [ARM] 4120/1: ep93xx: make clock init an arch_initcall()

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/arch-ep93xx/platform.h | 1 -
 1 file changed, 1 deletion(-)

(limited to 'include/asm-arm')

diff --git a/include/asm-arm/arch-ep93xx/platform.h b/include/asm-arm/arch-ep93xx/platform.h
index b4a8deb8..44eccec 100644
--- a/include/asm-arm/arch-ep93xx/platform.h
+++ b/include/asm-arm/arch-ep93xx/platform.h
@@ -8,7 +8,6 @@ void ep93xx_map_io(void);
 void ep93xx_init_irq(void);
 void ep93xx_init_time(unsigned long);
 void ep93xx_init_devices(void);
-void ep93xx_clock_init(void);
 extern struct sys_timer ep93xx_timer;
 
 struct ep93xx_eth_data
-- 
cgit v1.1


From 4932e397be71370b95f555f87d3b424d2b5ca57b Mon Sep 17 00:00:00 2001
From: Lennert Buytenhek <buytenh@wantstofly.org>
Date: Mon, 5 Feb 2007 00:38:48 +0100
Subject: [ARM] 4122/1: ep93xx: add support for GPIO port F interrupts

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/arch-ep93xx/ep93xx-regs.h | 5 +++++
 include/asm-arm/arch-ep93xx/irqs.h        | 8 ++++++--
 2 files changed, 11 insertions(+), 2 deletions(-)

(limited to 'include/asm-arm')

diff --git a/include/asm-arm/arch-ep93xx/ep93xx-regs.h b/include/asm-arm/arch-ep93xx/ep93xx-regs.h
index 593f562..625c6f0 100644
--- a/include/asm-arm/arch-ep93xx/ep93xx-regs.h
+++ b/include/asm-arm/arch-ep93xx/ep93xx-regs.h
@@ -73,6 +73,11 @@
 
 #define EP93XX_GPIO_BASE		(EP93XX_APB_VIRT_BASE + 0x00040000)
 #define EP93XX_GPIO_REG(x)		(EP93XX_GPIO_BASE + (x))
+#define EP93XX_GPIO_F_INT_TYPE1		EP93XX_GPIO_REG(0x4c)
+#define EP93XX_GPIO_F_INT_TYPE2		EP93XX_GPIO_REG(0x50)
+#define EP93XX_GPIO_F_INT_ACK		EP93XX_GPIO_REG(0x54)
+#define EP93XX_GPIO_F_INT_ENABLE	EP93XX_GPIO_REG(0x58)
+#define EP93XX_GPIO_F_INT_STATUS	EP93XX_GPIO_REG(0x5c)
 #define EP93XX_GPIO_A_INT_TYPE1		EP93XX_GPIO_REG(0x90)
 #define EP93XX_GPIO_A_INT_TYPE2		EP93XX_GPIO_REG(0x94)
 #define EP93XX_GPIO_A_INT_ACK		EP93XX_GPIO_REG(0x98)
diff --git a/include/asm-arm/arch-ep93xx/irqs.h b/include/asm-arm/arch-ep93xx/irqs.h
index ae532e304..2a8c636 100644
--- a/include/asm-arm/arch-ep93xx/irqs.h
+++ b/include/asm-arm/arch-ep93xx/irqs.h
@@ -67,9 +67,13 @@
 #define IRQ_EP93XX_SAI			60
 #define EP93XX_VIC2_VALID_IRQ_MASK	0x1fffffff
 
-#define IRQ_EP93XX_GPIO(x)		(64 + (x))
+/*
+ * Map GPIO A0..A7 to irq 64..71, B0..B7 to 72..79, and
+ * F0..F7 to 80..87.
+ */
+#define IRQ_EP93XX_GPIO(x)		(64 + (((x) + (((x) >> 2) & 8)) & 0x1f))
 
-#define NR_EP93XX_IRQS			IRQ_EP93XX_GPIO(16)
+#define NR_EP93XX_IRQS			(64 + 24)
 
 #define EP93XX_BOARD_IRQ(x)		(NR_EP93XX_IRQS + (x))
 #define EP93XX_BOARD_IRQS		32
-- 
cgit v1.1


From dcda7e4ba1adec80089ec784964b32f9fd653237 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Mon, 5 Feb 2007 14:47:35 +0100
Subject: [ARM] 4126/1: Add the ARM specific barriers

There are three barriers - ISB, DMB and DSB for different
scenarious. This patch adds their definitions in the system.h file.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/system.h | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

(limited to 'include/asm-arm')

diff --git a/include/asm-arm/system.h b/include/asm-arm/system.h
index aa223fc..e5aa372 100644
--- a/include/asm-arm/system.h
+++ b/include/asm-arm/system.h
@@ -193,11 +193,19 @@ extern unsigned int user_debug;
 #endif
 
 #if __LINUX_ARM_ARCH__ >= 6
-#define mb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 5" \
-                                   : : "r" (0) : "memory")
+#define isb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c5, 4" \
+				    : : "r" (0) : "memory")
+#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \
+				    : : "r" (0) : "memory")
+#define dmb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 5" \
+				    : : "r" (0) : "memory")
 #else
-#define mb() __asm__ __volatile__ ("" : : : "memory")
+#define isb() __asm__ __volatile__ ("" : : : "memory")
+#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \
+				    : : "r" (0) : "memory")
+#define dmb() __asm__ __volatile__ ("" : : : "memory")
 #endif
+#define mb() dmb()
 #define rmb() mb()
 #define wmb() mb()
 #define read_barrier_depends() do { } while(0)
-- 
cgit v1.1


From 620879c9e33262426db0ade650be5d7a2046377b Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Mon, 5 Feb 2007 14:47:46 +0100
Subject: [ARM] 4127/1: Flush the prefetch buffer after changing the DACR

The ARM Architecture Reference Manual specifies that a prefetch flush
is needed after changing the DACR register (chapter B2.7.6).

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/domain.h | 1 +
 1 file changed, 1 insertion(+)

(limited to 'include/asm-arm')

diff --git a/include/asm-arm/domain.h b/include/asm-arm/domain.h
index 4c2885a..3c12a76 100644
--- a/include/asm-arm/domain.h
+++ b/include/asm-arm/domain.h
@@ -57,6 +57,7 @@
 	__asm__ __volatile__(				\
 	"mcr	p15, 0, %0, c3, c0	@ set domain"	\
 	  : : "r" (x));					\
+	isb();						\
 	} while (0)
 
 #define modify_domain(dom,type)					\
-- 
cgit v1.1


From e6a5d66f58431c66c79e236f722a5ad7dd959ef3 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Mon, 5 Feb 2007 14:47:51 +0100
Subject: [ARM] 4129/1: Add barriers after the TLB operations

The architecture specification states that TLB operations are
guaranteed to be complete only after the execution of a DSB (Data
Synchronisation Barrier, former Data Write Barrier or Drain Write
Buffer). The branch target cache invalidation is also needed. The ISB
(Instruction Synchronisation Barrier, formerly Prefetch Flush) is
needed unless there will be a return from exception before the
corresponding mapping is used (i.e. user mappings).

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/tlbflush.h | 50 +++++++++++++++++++++++++++++++++++-----------
 1 file changed, 38 insertions(+), 12 deletions(-)

(limited to 'include/asm-arm')

diff --git a/include/asm-arm/tlbflush.h b/include/asm-arm/tlbflush.h
index cd10a0b..08c6991 100644
--- a/include/asm-arm/tlbflush.h
+++ b/include/asm-arm/tlbflush.h
@@ -247,7 +247,7 @@ static inline void local_flush_tlb_all(void)
 	const unsigned int __tlb_flag = __cpu_tlb_flags;
 
 	if (tlb_flag(TLB_WB))
-		asm("mcr p15, 0, %0, c7, c10, 4" : : "r" (zero) : "cc");
+		dsb();
 
 	if (tlb_flag(TLB_V3_FULL))
 		asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (zero) : "cc");
@@ -257,6 +257,15 @@ static inline void local_flush_tlb_all(void)
 		asm("mcr p15, 0, %0, c8, c6, 0" : : "r" (zero) : "cc");
 	if (tlb_flag(TLB_V4_I_FULL | TLB_V6_I_FULL))
 		asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc");
+
+	if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL |
+		     TLB_V6_I_PAGE | TLB_V6_D_PAGE |
+		     TLB_V6_I_ASID | TLB_V6_D_ASID)) {
+		/* flush the branch target cache */
+		asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
+		dsb();
+		isb();
+	}
 }
 
 static inline void local_flush_tlb_mm(struct mm_struct *mm)
@@ -266,7 +275,7 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm)
 	const unsigned int __tlb_flag = __cpu_tlb_flags;
 
 	if (tlb_flag(TLB_WB))
-		asm("mcr p15, 0, %0, c7, c10, 4" : : "r" (zero) : "cc");
+		dsb();
 
 	if (cpu_isset(smp_processor_id(), mm->cpu_vm_mask)) {
 		if (tlb_flag(TLB_V3_FULL))
@@ -285,6 +294,14 @@ static inline void local_flush_tlb_mm(struct mm_struct *mm)
 		asm("mcr p15, 0, %0, c8, c6, 2" : : "r" (asid) : "cc");
 	if (tlb_flag(TLB_V6_I_ASID))
 		asm("mcr p15, 0, %0, c8, c5, 2" : : "r" (asid) : "cc");
+
+	if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL |
+		     TLB_V6_I_PAGE | TLB_V6_D_PAGE |
+		     TLB_V6_I_ASID | TLB_V6_D_ASID)) {
+		/* flush the branch target cache */
+		asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
+		dsb();
+	}
 }
 
 static inline void
@@ -296,7 +313,7 @@ local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
 	uaddr = (uaddr & PAGE_MASK) | ASID(vma->vm_mm);
 
 	if (tlb_flag(TLB_WB))
-		asm("mcr p15, 0, %0, c7, c10, 4" : : "r" (zero));
+		dsb();
 
 	if (cpu_isset(smp_processor_id(), vma->vm_mm->cpu_vm_mask)) {
 		if (tlb_flag(TLB_V3_PAGE))
@@ -317,6 +334,14 @@ local_flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
 		asm("mcr p15, 0, %0, c8, c6, 1" : : "r" (uaddr) : "cc");
 	if (tlb_flag(TLB_V6_I_PAGE))
 		asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (uaddr) : "cc");
+
+	if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL |
+		     TLB_V6_I_PAGE | TLB_V6_D_PAGE |
+		     TLB_V6_I_ASID | TLB_V6_D_ASID)) {
+		/* flush the branch target cache */
+		asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
+		dsb();
+	}
 }
 
 static inline void local_flush_tlb_kernel_page(unsigned long kaddr)
@@ -327,7 +352,7 @@ static inline void local_flush_tlb_kernel_page(unsigned long kaddr)
 	kaddr &= PAGE_MASK;
 
 	if (tlb_flag(TLB_WB))
-		asm("mcr p15, 0, %0, c7, c10, 4" : : "r" (zero) : "cc");
+		dsb();
 
 	if (tlb_flag(TLB_V3_PAGE))
 		asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (kaddr) : "cc");
@@ -347,11 +372,14 @@ static inline void local_flush_tlb_kernel_page(unsigned long kaddr)
 	if (tlb_flag(TLB_V6_I_PAGE))
 		asm("mcr p15, 0, %0, c8, c5, 1" : : "r" (kaddr) : "cc");
 
-	/* The ARM ARM states that the completion of a TLB maintenance
-	 * operation is only guaranteed by a DSB instruction
-	 */
-	if (tlb_flag(TLB_V6_U_PAGE | TLB_V6_D_PAGE | TLB_V6_I_PAGE))
-		asm("mcr p15, 0, %0, c7, c10, 4" : : "r" (zero) : "cc");
+	if (tlb_flag(TLB_V6_I_FULL | TLB_V6_D_FULL |
+		     TLB_V6_I_PAGE | TLB_V6_D_PAGE |
+		     TLB_V6_I_ASID | TLB_V6_D_ASID)) {
+		/* flush the branch target cache */
+		asm("mcr p15, 0, %0, c7, c5, 6" : : "r" (zero) : "cc");
+		dsb();
+		isb();
+	}
 }
 
 /*
@@ -369,15 +397,13 @@ static inline void local_flush_tlb_kernel_page(unsigned long kaddr)
  */
 static inline void flush_pmd_entry(pmd_t *pmd)
 {
-	const unsigned int zero = 0;
 	const unsigned int __tlb_flag = __cpu_tlb_flags;
 
 	if (tlb_flag(TLB_DCLEAN))
 		asm("mcr	p15, 0, %0, c7, c10, 1	@ flush_pmd"
 			: : "r" (pmd) : "cc");
 	if (tlb_flag(TLB_WB))
-		asm("mcr	p15, 0, %0, c7, c10, 4	@ flush_pmd"
-			: : "r" (zero) : "cc");
+		dsb();
 }
 
 static inline void clean_pmd_entry(pmd_t *pmd)
-- 
cgit v1.1


From 56660faf9e8088542e85207df45fb9c5f4dd3909 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Mon, 5 Feb 2007 14:48:02 +0100
Subject: [ARM] 4133/1: Add ISB after changes to CP15 registers

According to ARM ARM, changes to the CP15 registers are only
guaranteed to be visible after an Instruction Synchronization Barrier
(ISB). This patch adds the ISB at the end of set_cr and
set_copro_access functions and also moves them further down in the
file, below the isb macro definition.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/system.h | 70 +++++++++++++++++++++++++-----------------------
 1 file changed, 36 insertions(+), 34 deletions(-)

(limited to 'include/asm-arm')

diff --git a/include/asm-arm/system.h b/include/asm-arm/system.h
index e5aa372..f438690 100644
--- a/include/asm-arm/system.h
+++ b/include/asm-arm/system.h
@@ -140,6 +140,40 @@ static inline int cpu_is_xsc3(void)
 #define	cpu_is_xscale()	1
 #endif
 
+#define UDBG_UNDEFINED	(1 << 0)
+#define UDBG_SYSCALL	(1 << 1)
+#define UDBG_BADABORT	(1 << 2)
+#define UDBG_SEGV	(1 << 3)
+#define UDBG_BUS	(1 << 4)
+
+extern unsigned int user_debug;
+
+#if __LINUX_ARM_ARCH__ >= 4
+#define vectors_high()	(cr_alignment & CR_V)
+#else
+#define vectors_high()	(0)
+#endif
+
+#if __LINUX_ARM_ARCH__ >= 6
+#define isb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c5, 4" \
+				    : : "r" (0) : "memory")
+#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \
+				    : : "r" (0) : "memory")
+#define dmb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 5" \
+				    : : "r" (0) : "memory")
+#else
+#define isb() __asm__ __volatile__ ("" : : : "memory")
+#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \
+				    : : "r" (0) : "memory")
+#define dmb() __asm__ __volatile__ ("" : : : "memory")
+#endif
+#define mb() dmb()
+#define rmb() mb()
+#define wmb() mb()
+#define read_barrier_depends() do { } while(0)
+#define set_mb(var, value)  do { var = value; mb(); } while (0)
+#define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t");
+
 extern unsigned long cr_no_alignment;	/* defined in entry-armv.S */
 extern unsigned long cr_alignment;	/* defined in entry-armv.S */
 
@@ -154,6 +188,7 @@ static inline void set_cr(unsigned int val)
 {
 	asm volatile("mcr p15, 0, %0, c1, c0, 0	@ set CR"
 	  : : "r" (val) : "cc");
+	isb();
 }
 
 #ifndef CONFIG_SMP
@@ -176,42 +211,9 @@ static inline void set_copro_access(unsigned int val)
 {
 	asm volatile("mcr p15, 0, %0, c1, c0, 2 @ set copro access"
 	  : : "r" (val) : "cc");
+	isb();
 }
 
-#define UDBG_UNDEFINED	(1 << 0)
-#define UDBG_SYSCALL	(1 << 1)
-#define UDBG_BADABORT	(1 << 2)
-#define UDBG_SEGV	(1 << 3)
-#define UDBG_BUS	(1 << 4)
-
-extern unsigned int user_debug;
-
-#if __LINUX_ARM_ARCH__ >= 4
-#define vectors_high()	(cr_alignment & CR_V)
-#else
-#define vectors_high()	(0)
-#endif
-
-#if __LINUX_ARM_ARCH__ >= 6
-#define isb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c5, 4" \
-				    : : "r" (0) : "memory")
-#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \
-				    : : "r" (0) : "memory")
-#define dmb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 5" \
-				    : : "r" (0) : "memory")
-#else
-#define isb() __asm__ __volatile__ ("" : : : "memory")
-#define dsb() __asm__ __volatile__ ("mcr p15, 0, %0, c7, c10, 4" \
-				    : : "r" (0) : "memory")
-#define dmb() __asm__ __volatile__ ("" : : : "memory")
-#endif
-#define mb() dmb()
-#define rmb() mb()
-#define wmb() mb()
-#define read_barrier_depends() do { } while(0)
-#define set_mb(var, value)  do { var = value; mb(); } while (0)
-#define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t");
-
 /*
  * switch_mm() may do a full cache flush over the context switch,
  * so enable interrupts over the context switch to avoid high
-- 
cgit v1.1


From 953233dc9958ba2b29753d0f24e37a33a076a5f6 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Mon, 5 Feb 2007 14:48:08 +0100
Subject: [ARM] 4134/1: Add generic support for outer caches

The outer cache can be L2 as on RealView/EB MPCore platform or even L3
or further on ARMv7 cores. This patch adds the generic support for
flushing the outer cache in the DMA operations.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/cacheflush.h | 37 +++++++++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)

(limited to 'include/asm-arm')

diff --git a/include/asm-arm/cacheflush.h b/include/asm-arm/cacheflush.h
index 5f531ea..ce60b37 100644
--- a/include/asm-arm/cacheflush.h
+++ b/include/asm-arm/cacheflush.h
@@ -190,6 +190,12 @@ struct cpu_cache_fns {
 	void (*dma_flush_range)(unsigned long, unsigned long);
 };
 
+struct outer_cache_fns {
+	void (*inv_range)(unsigned long, unsigned long);
+	void (*clean_range)(unsigned long, unsigned long);
+	void (*flush_range)(unsigned long, unsigned long);
+};
+
 /*
  * Select the calling method
  */
@@ -246,6 +252,37 @@ extern void dmac_flush_range(unsigned long, unsigned long);
 
 #endif
 
+#ifdef CONFIG_OUTER_CACHE
+
+extern struct outer_cache_fns outer_cache;
+
+static inline void outer_inv_range(unsigned long start, unsigned long end)
+{
+	if (outer_cache.inv_range)
+		outer_cache.inv_range(start, end);
+}
+static inline void outer_clean_range(unsigned long start, unsigned long end)
+{
+	if (outer_cache.clean_range)
+		outer_cache.clean_range(start, end);
+}
+static inline void outer_flush_range(unsigned long start, unsigned long end)
+{
+	if (outer_cache.flush_range)
+		outer_cache.flush_range(start, end);
+}
+
+#else
+
+static inline void outer_inv_range(unsigned long start, unsigned long end)
+{ }
+static inline void outer_clean_range(unsigned long start, unsigned long end)
+{ }
+static inline void outer_flush_range(unsigned long start, unsigned long end)
+{ }
+
+#endif
+
 /*
  * flush_cache_vmap() is used when creating mappings (eg, via vmap,
  * vmalloc, ioremap etc) in kernel space for pages.  Since the
-- 
cgit v1.1


From 7ae5a761d2ffc4cf7d3248e09f4d3da234434f30 Mon Sep 17 00:00:00 2001
From: Russell King <rmk@dyn-67.arm.linux.org.uk>
Date: Tue, 6 Feb 2007 17:39:31 +0000
Subject: [ARM] Convert DMA cache handling to take const void * args

The DMA cache handling functions take virtual addresses, but in the
form of unsigned long arguments.  This leads to a little confusion
about what exactly they take.  So, convert them to take const void *
instead.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/cacheflush.h  | 12 ++++++------
 include/asm-arm/dma-mapping.h |  2 +-
 2 files changed, 7 insertions(+), 7 deletions(-)

(limited to 'include/asm-arm')

diff --git a/include/asm-arm/cacheflush.h b/include/asm-arm/cacheflush.h
index ce60b37..afad32c 100644
--- a/include/asm-arm/cacheflush.h
+++ b/include/asm-arm/cacheflush.h
@@ -185,9 +185,9 @@ struct cpu_cache_fns {
 	void (*coherent_user_range)(unsigned long, unsigned long);
 	void (*flush_kern_dcache_page)(void *);
 
-	void (*dma_inv_range)(unsigned long, unsigned long);
-	void (*dma_clean_range)(unsigned long, unsigned long);
-	void (*dma_flush_range)(unsigned long, unsigned long);
+	void (*dma_inv_range)(const void *, const void *);
+	void (*dma_clean_range)(const void *, const void *);
+	void (*dma_flush_range)(const void *, const void *);
 };
 
 struct outer_cache_fns {
@@ -246,9 +246,9 @@ extern void __cpuc_flush_dcache_page(void *);
 #define dmac_clean_range		__glue(_CACHE,_dma_clean_range)
 #define dmac_flush_range		__glue(_CACHE,_dma_flush_range)
 
-extern void dmac_inv_range(unsigned long, unsigned long);
-extern void dmac_clean_range(unsigned long, unsigned long);
-extern void dmac_flush_range(unsigned long, unsigned long);
+extern void dmac_inv_range(const void *, const void *);
+extern void dmac_clean_range(const void *, const void *);
+extern void dmac_flush_range(const void *, const void *);
 
 #endif
 
diff --git a/include/asm-arm/dma-mapping.h b/include/asm-arm/dma-mapping.h
index 9bc46b4..a1d574c 100644
--- a/include/asm-arm/dma-mapping.h
+++ b/include/asm-arm/dma-mapping.h
@@ -17,7 +17,7 @@
  * platforms with CONFIG_DMABOUNCE.
  * Use the driver DMA support - see dma-mapping.h (dma_sync_*)
  */
-extern void consistent_sync(void *kaddr, size_t size, int rw);
+extern void consistent_sync(const void *kaddr, size_t size, int rw);
 
 /*
  * Return whether the given device DMA address mask can be supported
-- 
cgit v1.1


From a93d48cc6019f84394b31d10c0d830a3b71696be Mon Sep 17 00:00:00 2001
From: Andrew Victor <andrew@sanpeople.com>
Date: Thu, 1 Feb 2007 09:22:23 +0100
Subject: [ARM] 4119/1: AT91: Fix build of AT91SAM9260

Fix build failure of AT91SAM9260.

The AT91RM9200 ethernet driver (at91_ether.c) stores platform data in a
"struct at91_eth_data" structure, but the AT91SAM9260 (and AT91SAM9263)
ethernet driver (macb.c) [developed on the AVR32 architecture] expects a
"struct eth_platform_data".

Since the platform data of the two drivers is very similar, we continue
to use the "struct at91_eth_data" for all AT91 processors but add a
    #define eth_platform_data      at91_eth_data
in board.h to keep the MACB driver happy.

Original patch by Jan Altenberg.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/arch-at91rm9200/board.h | 4 ++++
 1 file changed, 4 insertions(+)

(limited to 'include/asm-arm')

diff --git a/include/asm-arm/arch-at91rm9200/board.h b/include/asm-arm/arch-at91rm9200/board.h
index 768e0fc..f3a974b 100644
--- a/include/asm-arm/arch-at91rm9200/board.h
+++ b/include/asm-arm/arch-at91rm9200/board.h
@@ -69,6 +69,10 @@ struct at91_eth_data {
 };
 extern void __init at91_add_device_eth(struct at91_eth_data *data);
 
+#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263)
+#define eth_platform_data	at91_eth_data
+#endif
+
  /* USB Host */
 struct at91_usbh_data {
 	u8		ports;		/* number of ports on root hub */
-- 
cgit v1.1


From 9d0412680e6c7b685ee466842047bcfb924d6dc5 Mon Sep 17 00:00:00 2001
From: Andrew Victor <andrew@sanpeople.com>
Date: Mon, 5 Feb 2007 11:42:07 +0100
Subject: [ARM] 4124/1: Rename mach-at91rm9200 and arch-at91rm9200 directories

Now that Linux includes support for the Atmel AT91SAM9260 and
AT91SAM9261 processors in addition to the original Atmel AT91RM9200
(with support for more AT91 processors pending), the "mach-at91rm9200"
and "arch-at91rm9200" directories should be renamed to indicate their
more generic nature.

The following git commands should be run BEFORE applying this patch:
  git-mv arch/arm/mach-at91rm9200 arch/arm/mach-at91
  git-mv include/asm-arm/arch-at91rm9200 include/asm-arm/arch-at91

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/arch-at91/at91_aic.h               |  53 ++++
 include/asm-arm/arch-at91/at91_dbgu.h              |  45 ++++
 include/asm-arm/arch-at91/at91_ecc.h               |  38 +++
 include/asm-arm/arch-at91/at91_lcdc.h              | 148 +++++++++++
 include/asm-arm/arch-at91/at91_mci.h               | 106 ++++++++
 include/asm-arm/arch-at91/at91_pdc.h               |  36 +++
 include/asm-arm/arch-at91/at91_pio.h               |  49 ++++
 include/asm-arm/arch-at91/at91_pit.h               |  29 ++
 include/asm-arm/arch-at91/at91_pmc.h               |  92 +++++++
 include/asm-arm/arch-at91/at91_rstc.h              |  39 +++
 include/asm-arm/arch-at91/at91_rtc.h               |  75 ++++++
 include/asm-arm/arch-at91/at91_rtt.h               |  32 +++
 include/asm-arm/arch-at91/at91_shdwc.h             |  33 +++
 include/asm-arm/arch-at91/at91_spi.h               |  81 ++++++
 include/asm-arm/arch-at91/at91_ssc.h               | 106 ++++++++
 include/asm-arm/arch-at91/at91_st.h                |  49 ++++
 include/asm-arm/arch-at91/at91_tc.h                | 146 +++++++++++
 include/asm-arm/arch-at91/at91_twi.h               |  57 ++++
 include/asm-arm/arch-at91/at91_wdt.h               |  34 +++
 include/asm-arm/arch-at91/at91rm9200.h             | 291 ++++++++++++++++++++
 include/asm-arm/arch-at91/at91rm9200_emac.h        | 138 ++++++++++
 include/asm-arm/arch-at91/at91rm9200_mc.h          | 160 +++++++++++
 include/asm-arm/arch-at91/at91sam9260.h            | 125 +++++++++
 include/asm-arm/arch-at91/at91sam9260_matrix.h     |  78 ++++++
 include/asm-arm/arch-at91/at91sam9261.h            | 292 +++++++++++++++++++++
 include/asm-arm/arch-at91/at91sam9261_matrix.h     |  62 +++++
 include/asm-arm/arch-at91/at91sam926x_mc.h         | 134 ++++++++++
 include/asm-arm/arch-at91/board.h                  | 121 +++++++++
 include/asm-arm/arch-at91/cpu.h                    |  49 ++++
 include/asm-arm/arch-at91/debug-macro.S            |  39 +++
 include/asm-arm/arch-at91/dma.h                    |  19 ++
 include/asm-arm/arch-at91/entry-macro.S            |  26 ++
 include/asm-arm/arch-at91/gpio.h                   | 199 ++++++++++++++
 include/asm-arm/arch-at91/hardware.h               |  88 +++++++
 include/asm-arm/arch-at91/io.h                     |  32 +++
 include/asm-arm/arch-at91/irqs.h                   |  44 ++++
 include/asm-arm/arch-at91/memory.h                 |  39 +++
 include/asm-arm/arch-at91/system.h                 |  53 ++++
 include/asm-arm/arch-at91/timex.h                  |  37 +++
 include/asm-arm/arch-at91/uncompress.h             |  56 ++++
 include/asm-arm/arch-at91/vmalloc.h                |  26 ++
 include/asm-arm/arch-at91rm9200/at91_aic.h         |  53 ----
 include/asm-arm/arch-at91rm9200/at91_dbgu.h        |  45 ----
 include/asm-arm/arch-at91rm9200/at91_ecc.h         |  38 ---
 include/asm-arm/arch-at91rm9200/at91_lcdc.h        | 148 -----------
 include/asm-arm/arch-at91rm9200/at91_mci.h         | 106 --------
 include/asm-arm/arch-at91rm9200/at91_pdc.h         |  36 ---
 include/asm-arm/arch-at91rm9200/at91_pio.h         |  49 ----
 include/asm-arm/arch-at91rm9200/at91_pit.h         |  29 --
 include/asm-arm/arch-at91rm9200/at91_pmc.h         |  92 -------
 include/asm-arm/arch-at91rm9200/at91_rstc.h        |  39 ---
 include/asm-arm/arch-at91rm9200/at91_rtc.h         |  75 ------
 include/asm-arm/arch-at91rm9200/at91_rtt.h         |  32 ---
 include/asm-arm/arch-at91rm9200/at91_shdwc.h       |  33 ---
 include/asm-arm/arch-at91rm9200/at91_spi.h         |  81 ------
 include/asm-arm/arch-at91rm9200/at91_ssc.h         | 106 --------
 include/asm-arm/arch-at91rm9200/at91_st.h          |  49 ----
 include/asm-arm/arch-at91rm9200/at91_tc.h          | 146 -----------
 include/asm-arm/arch-at91rm9200/at91_twi.h         |  57 ----
 include/asm-arm/arch-at91rm9200/at91_wdt.h         |  34 ---
 include/asm-arm/arch-at91rm9200/at91rm9200.h       | 291 --------------------
 include/asm-arm/arch-at91rm9200/at91rm9200_emac.h  | 138 ----------
 include/asm-arm/arch-at91rm9200/at91rm9200_mc.h    | 160 -----------
 include/asm-arm/arch-at91rm9200/at91sam9260.h      | 125 ---------
 .../asm-arm/arch-at91rm9200/at91sam9260_matrix.h   |  78 ------
 include/asm-arm/arch-at91rm9200/at91sam9261.h      | 292 ---------------------
 .../asm-arm/arch-at91rm9200/at91sam9261_matrix.h   |  62 -----
 include/asm-arm/arch-at91rm9200/at91sam926x_mc.h   | 134 ----------
 include/asm-arm/arch-at91rm9200/board.h            | 121 ---------
 include/asm-arm/arch-at91rm9200/cpu.h              |  49 ----
 include/asm-arm/arch-at91rm9200/debug-macro.S      |  39 ---
 include/asm-arm/arch-at91rm9200/dma.h              |  19 --
 include/asm-arm/arch-at91rm9200/entry-macro.S      |  26 --
 include/asm-arm/arch-at91rm9200/gpio.h             | 199 --------------
 include/asm-arm/arch-at91rm9200/hardware.h         |  88 -------
 include/asm-arm/arch-at91rm9200/io.h               |  32 ---
 include/asm-arm/arch-at91rm9200/irqs.h             |  44 ----
 include/asm-arm/arch-at91rm9200/memory.h           |  39 ---
 include/asm-arm/arch-at91rm9200/system.h           |  53 ----
 include/asm-arm/arch-at91rm9200/timex.h            |  37 ---
 include/asm-arm/arch-at91rm9200/uncompress.h       |  56 ----
 include/asm-arm/arch-at91rm9200/vmalloc.h          |  26 --
 82 files changed, 3356 insertions(+), 3356 deletions(-)
 create mode 100644 include/asm-arm/arch-at91/at91_aic.h
 create mode 100644 include/asm-arm/arch-at91/at91_dbgu.h
 create mode 100644 include/asm-arm/arch-at91/at91_ecc.h
 create mode 100644 include/asm-arm/arch-at91/at91_lcdc.h
 create mode 100644 include/asm-arm/arch-at91/at91_mci.h
 create mode 100644 include/asm-arm/arch-at91/at91_pdc.h
 create mode 100644 include/asm-arm/arch-at91/at91_pio.h
 create mode 100644 include/asm-arm/arch-at91/at91_pit.h
 create mode 100644 include/asm-arm/arch-at91/at91_pmc.h
 create mode 100644 include/asm-arm/arch-at91/at91_rstc.h
 create mode 100644 include/asm-arm/arch-at91/at91_rtc.h
 create mode 100644 include/asm-arm/arch-at91/at91_rtt.h
 create mode 100644 include/asm-arm/arch-at91/at91_shdwc.h
 create mode 100644 include/asm-arm/arch-at91/at91_spi.h
 create mode 100644 include/asm-arm/arch-at91/at91_ssc.h
 create mode 100644 include/asm-arm/arch-at91/at91_st.h
 create mode 100644 include/asm-arm/arch-at91/at91_tc.h
 create mode 100644 include/asm-arm/arch-at91/at91_twi.h
 create mode 100644 include/asm-arm/arch-at91/at91_wdt.h
 create mode 100644 include/asm-arm/arch-at91/at91rm9200.h
 create mode 100644 include/asm-arm/arch-at91/at91rm9200_emac.h
 create mode 100644 include/asm-arm/arch-at91/at91rm9200_mc.h
 create mode 100644 include/asm-arm/arch-at91/at91sam9260.h
 create mode 100644 include/asm-arm/arch-at91/at91sam9260_matrix.h
 create mode 100644 include/asm-arm/arch-at91/at91sam9261.h
 create mode 100644 include/asm-arm/arch-at91/at91sam9261_matrix.h
 create mode 100644 include/asm-arm/arch-at91/at91sam926x_mc.h
 create mode 100644 include/asm-arm/arch-at91/board.h
 create mode 100644 include/asm-arm/arch-at91/cpu.h
 create mode 100644 include/asm-arm/arch-at91/debug-macro.S
 create mode 100644 include/asm-arm/arch-at91/dma.h
 create mode 100644 include/asm-arm/arch-at91/entry-macro.S
 create mode 100644 include/asm-arm/arch-at91/gpio.h
 create mode 100644 include/asm-arm/arch-at91/hardware.h
 create mode 100644 include/asm-arm/arch-at91/io.h
 create mode 100644 include/asm-arm/arch-at91/irqs.h
 create mode 100644 include/asm-arm/arch-at91/memory.h
 create mode 100644 include/asm-arm/arch-at91/system.h
 create mode 100644 include/asm-arm/arch-at91/timex.h
 create mode 100644 include/asm-arm/arch-at91/uncompress.h
 create mode 100644 include/asm-arm/arch-at91/vmalloc.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/at91_aic.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/at91_dbgu.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/at91_ecc.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/at91_lcdc.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/at91_mci.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/at91_pdc.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/at91_pio.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/at91_pit.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/at91_pmc.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/at91_rstc.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/at91_rtc.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/at91_rtt.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/at91_shdwc.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/at91_spi.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/at91_ssc.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/at91_st.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/at91_tc.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/at91_twi.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/at91_wdt.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/at91rm9200.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/at91rm9200_emac.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/at91rm9200_mc.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/at91sam9260.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/at91sam9261.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/at91sam926x_mc.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/board.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/cpu.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/debug-macro.S
 delete mode 100644 include/asm-arm/arch-at91rm9200/dma.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/entry-macro.S
 delete mode 100644 include/asm-arm/arch-at91rm9200/gpio.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/hardware.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/io.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/irqs.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/memory.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/system.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/timex.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/uncompress.h
 delete mode 100644 include/asm-arm/arch-at91rm9200/vmalloc.h

(limited to 'include/asm-arm')

diff --git a/include/asm-arm/arch-at91/at91_aic.h b/include/asm-arm/arch-at91/at91_aic.h
new file mode 100644
index 0000000..df44c12
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91_aic.h
@@ -0,0 +1,53 @@
+/*
+ * include/asm-arm/arch-at91/at91_aic.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Advanced Interrupt Controller (AIC) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_AIC_H
+#define AT91_AIC_H
+
+#define AT91_AIC_SMR(n)		(AT91_AIC + ((n) * 4))	/* Source Mode Registers 0-31 */
+#define		AT91_AIC_PRIOR		(7 << 0)		/* Priority Level */
+#define		AT91_AIC_SRCTYPE	(3 << 5)		/* Interrupt Source Type */
+#define			AT91_AIC_SRCTYPE_LOW		(0 << 5)
+#define			AT91_AIC_SRCTYPE_FALLING	(1 << 5)
+#define			AT91_AIC_SRCTYPE_HIGH		(2 << 5)
+#define			AT91_AIC_SRCTYPE_RISING		(3 << 5)
+
+#define AT91_AIC_SVR(n)		(AT91_AIC + 0x80 + ((n) * 4))	/* Source Vector Registers 0-31 */
+#define AT91_AIC_IVR		(AT91_AIC + 0x100)	/* Interrupt Vector Register */
+#define AT91_AIC_FVR		(AT91_AIC + 0x104)	/* Fast Interrupt Vector Register */
+#define AT91_AIC_ISR		(AT91_AIC + 0x108)	/* Interrupt Status Register */
+#define		AT91_AIC_IRQID		(0x1f << 0)		/* Current Interrupt Identifier */
+
+#define AT91_AIC_IPR		(AT91_AIC + 0x10c)	/* Interrupt Pending Register */
+#define AT91_AIC_IMR		(AT91_AIC + 0x110)	/* Interrupt Mask Register */
+#define AT91_AIC_CISR		(AT91_AIC + 0x114)	/* Core Interrupt Status Register */
+#define		AT91_AIC_NFIQ		(1 << 0)		/* nFIQ Status */
+#define		AT91_AIC_NIRQ		(1 << 1)		/* nIRQ Status */
+
+#define AT91_AIC_IECR		(AT91_AIC + 0x120)	/* Interrupt Enable Command Register */
+#define AT91_AIC_IDCR		(AT91_AIC + 0x124)	/* Interrupt Disable Command Register */
+#define AT91_AIC_ICCR		(AT91_AIC + 0x128)	/* Interrupt Clear Command Register */
+#define AT91_AIC_ISCR		(AT91_AIC + 0x12c)	/* Interrupt Set Command Register */
+#define AT91_AIC_EOICR		(AT91_AIC + 0x130)	/* End of Interrupt Command Register */
+#define AT91_AIC_SPU		(AT91_AIC + 0x134)	/* Spurious Interrupt Vector Register */
+#define AT91_AIC_DCR		(AT91_AIC + 0x138)	/* Debug Control Register */
+#define		AT91_AIC_DCR_PROT	(1 << 0)		/* Protection Mode */
+#define		AT91_AIC_DCR_GMSK	(1 << 1)		/* General Mask */
+
+#define AT91_AIC_FFER		(AT91_AIC + 0x140)	/* Fast Forcing Enable Register [SAM9 only] */
+#define AT91_AIC_FFDR		(AT91_AIC + 0x144)	/* Fast Forcing Disable Register [SAM9 only] */
+#define AT91_AIC_FFSR		(AT91_AIC + 0x148)	/* Fast Forcing Status Register [SAM9 only] */
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91_dbgu.h b/include/asm-arm/arch-at91/at91_dbgu.h
new file mode 100644
index 0000000..1002a80
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91_dbgu.h
@@ -0,0 +1,45 @@
+/*
+ * include/asm-arm/arch-at91/at91_dbgu.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Debug Unit (DBGU) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_DBGU_H
+#define AT91_DBGU_H
+
+#define AT91_DBGU_CR		(AT91_DBGU + 0x00)	/* Control Register */
+#define AT91_DBGU_MR		(AT91_DBGU + 0x04)	/* Mode Register */
+#define AT91_DBGU_IER		(AT91_DBGU + 0x08)	/* Interrupt Enable Register */
+#define		AT91_DBGU_TXRDY		(1 << 1)		/* Transmitter Ready */
+#define		AT91_DBGU_TXEMPTY	(1 << 9)		/* Transmitter Empty */
+#define AT91_DBGU_IDR		(AT91_DBGU + 0x0c)	/* Interrupt Disable Register */
+#define AT91_DBGU_IMR		(AT91_DBGU + 0x10)	/* Interrupt Mask Register */
+#define AT91_DBGU_SR		(AT91_DBGU + 0x14)	/* Status Register */
+#define AT91_DBGU_RHR		(AT91_DBGU + 0x18)	/* Receiver Holding Register */
+#define AT91_DBGU_THR		(AT91_DBGU + 0x1c)	/* Transmitter Holding Register */
+#define AT91_DBGU_BRGR		(AT91_DBGU + 0x20)	/* Baud Rate Generator Register */
+
+#define AT91_DBGU_CIDR		(AT91_DBGU + 0x40)	/* Chip ID Register */
+#define AT91_DBGU_EXID		(AT91_DBGU + 0x44)	/* Chip ID Extension Register */
+#define		AT91_CIDR_VERSION	(0x1f << 0)		/* Version of the Device */
+#define		AT91_CIDR_EPROC		(7    << 5)		/* Embedded Processor */
+#define		AT91_CIDR_NVPSIZ	(0xf  << 8)		/* Nonvolatile Program Memory Size */
+#define		AT91_CIDR_NVPSIZ2	(0xf  << 12)		/* Second Nonvolatile Program Memory Size */
+#define		AT91_CIDR_SRAMSIZ	(0xf  << 16)		/* Internal SRAM Size */
+#define		AT91_CIDR_ARCH		(0xff << 20)		/* Architecture Identifier */
+#define		AT91_CIDR_NVPTYP	(7    << 28)		/* Nonvolatile Program Memory Type */
+#define		AT91_CIDR_EXT		(1    << 31)		/* Extension Flag */
+
+#define AT91_DBGU_FNR		(AT91_DBGU + 0x48)	/* Force NTRST Register [SAM9 only] */
+#define		AT91_DBGU_FNTRST	(1 << 0)		/* Force NTRST */
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91_ecc.h b/include/asm-arm/arch-at91/at91_ecc.h
new file mode 100644
index 0000000..ff93df5
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91_ecc.h
@@ -0,0 +1,38 @@
+/*
+ * include/asm-arm/arch-at91/at91_ecc.h
+ *
+ * Error Corrected Code Controller (ECC) - System peripherals regsters.
+ * Based on AT91SAM9260 datasheet revision B.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef AT91_ECC_H
+#define AT91_ECC_H
+
+#define AT91_ECC_CR		(AT91_ECC + 0x00)	/* Control register */
+#define		AT91_ECC_RST		(1 << 0)		/* Reset parity */
+
+#define AT91_ECC_MR		(AT91_ECC + 0x04)	/* Mode register */
+#define		AT91_ECC_PAGESIZE	(3 << 0)		/* Page Size */
+#define			AT91_ECC_PAGESIZE_528		(0)
+#define			AT91_ECC_PAGESIZE_1056		(1)
+#define			AT91_ECC_PAGESIZE_2112		(2)
+#define			AT91_ECC_PAGESIZE_4224		(3)
+
+#define AT91_ECC_SR		(AT91_ECC + 0x08)	/* Status register */
+#define		AT91_ECC_RECERR		(1 << 0)		/* Recoverable Error */
+#define		AT91_ECC_ECCERR		(1 << 1)		/* ECC Single Bit Error */
+#define		AT91_ECC_MULERR		(1 << 2)		/* Multiple Errors */
+
+#define AT91_ECC_PR		(AT91_ECC + 0x0c)	/* Parity register */
+#define		AT91_ECC_BITADDR	(0xf << 0)		/* Bit Error Address */
+#define		AT91_ECC_WORDADDR	(0xfff << 4)		/* Word Error Address */
+
+#define AT91_ECC_NPR		(AT91_ECC + 0x10)	/* NParity register */
+#define		AT91_ECC_NPARITY	(0xffff << 0)		/* NParity */
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91_lcdc.h b/include/asm-arm/arch-at91/at91_lcdc.h
new file mode 100644
index 0000000..ab040a4
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91_lcdc.h
@@ -0,0 +1,148 @@
+/*
+ * include/asm-arm/arch-at91/at91_lcdc.h
+ *
+ * LCD Controller (LCDC).
+ * Based on AT91SAM9261 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_LCDC_H
+#define AT91_LCDC_H
+
+#define AT91_LCDC_DMABADDR1	0x00		/* DMA Base Address Register 1 */
+#define AT91_LCDC_DMABADDR2	0x04		/* DMA Base Address Register 2 */
+#define AT91_LCDC_DMAFRMPT1	0x08		/* DMA Frame Pointer Register 1 */
+#define AT91_LCDC_DMAFRMPT2	0x0c		/* DMA Frame Pointer Register 2 */
+#define AT91_LCDC_DMAFRMADD1	0x10		/* DMA Frame Address Register 1 */
+#define AT91_LCDC_DMAFRMADD2	0x14		/* DMA Frame Address Register 2 */
+
+#define AT91_LCDC_DMAFRMCFG	0x18		/* DMA Frame Configuration Register */
+#define		AT91_LCDC_FRSIZE	(0x7fffff <<  0)	/* Frame Size */
+#define		AT91_LCDC_BLENGTH	(0x7f     << 24)	/* Burst Length */
+
+#define AT91_LCDC_DMACON	0x1c		/* DMA Control Register */
+#define		AT91_LCDC_DMAEN		(0x1 << 0)	/* DMA Enable */
+#define		AT91_LCDC_DMARST	(0x1 << 1)	/* DMA Reset */
+#define		AT91_LCDC_DMABUSY	(0x1 << 2)	/* DMA Busy */
+
+#define AT91_LCDC_LCDCON1	0x0800		/* LCD Control Register 1 */
+#define		AT91_LCDC_BYPASS	(1     <<  0)	/* Bypass lcd_dotck divider */
+#define		AT91_LCDC_CLKVAL	(0x1ff << 12)	/* Clock Divider */
+#define		AT91_LCDC_LINCNT	(0x7ff << 21)	/* Line Counter */
+
+#define AT91_LCDC_LCDCON2	0x0804		/* LCD Control Register 2 */
+#define		AT91_LCDC_DISTYPE	(3 << 0)	/* Display Type */
+#define			AT91_LCDC_DISTYPE_STNMONO	(0 << 0)
+#define			AT91_LCDC_DISTYPE_STNCOLOR	(1 << 0)
+#define			AT91_LCDC_DISTYPE_TFT		(2 << 0)
+#define		AT91_LCDC_SCANMOD	(1 << 2)	/* Scan Mode */
+#define			AT91_LCDC_SCANMOD_SINGLE	(0 << 2)
+#define			AT91_LCDC_SCANMOD_DUAL		(1 << 2)
+#define		AT91_LCDC_IFWIDTH	(3 << 3)	/*Interface Width */
+#define			AT91_LCDC_IFWIDTH_4		(0 << 3)
+#define			AT91_LCDC_IFWIDTH_8		(1 << 3)
+#define			AT91_LCDC_IFWIDTH_16		(2 << 3)
+#define		AT91_LCDC_PIXELSIZE	(7 << 5)	/* Bits per pixel */
+#define			AT91_LCDC_PIXELSIZE_1		(0 << 5)
+#define			AT91_LCDC_PIXELSIZE_2		(1 << 5)
+#define			AT91_LCDC_PIXELSIZE_4		(2 << 5)
+#define			AT91_LCDC_PIXELSIZE_8		(3 << 5)
+#define			AT91_LCDC_PIXELSIZE_16		(4 << 5)
+#define			AT91_LCDC_PIXELSIZE_24		(5 << 5)
+#define		AT91_LCDC_INVVD		(1 << 8)	/* LCD Data polarity */
+#define			AT91_LCDC_INVVD_NORMAL		(0 << 8)
+#define			AT91_LCDC_INVVD_INVERTED	(1 << 8)
+#define		AT91_LCDC_INVFRAME	(1 << 9 )	/* LCD VSync polarity */
+#define			AT91_LCDC_INVFRAME_NORMAL	(0 << 9)
+#define			AT91_LCDC_INVFRAME_INVERTED	(1 << 9)
+#define		AT91_LCDC_INVLINE	(1 << 10)	/* LCD HSync polarity */
+#define			AT91_LCDC_INVLINE_NORMAL	(0 << 10)
+#define			AT91_LCDC_INVLINE_INVERTED	(1 << 10)
+#define		AT91_LCDC_INVCLK	(1 << 11)	/* LCD dotclk polarity */
+#define			AT91_LCDC_INVCLK_NORMAL		(0 << 11)
+#define			AT91_LCDC_INVCLK_INVERTED	(1 << 11)
+#define		AT91_LCDC_INVDVAL	(1 << 12)	/* LCD dval polarity */
+#define			AT91_LCDC_INVDVAL_NORMAL	(0 << 12)
+#define			AT91_LCDC_INVDVAL_INVERTED	(1 << 12)
+#define		AT91_LCDC_CLKMOD	(1 << 15)	/* LCD dotclk mode */
+#define			AT91_LCDC_CLKMOD_ACTIVEDISPLAY	(0 << 15)
+#define			AT91_LCDC_CLKMOD_ALWAYSACTIVE	(1 << 15)
+#define		AT91_LCDC_MEMOR		(1 << 31)	/* Memory Ordering Format */
+#define			AT91_LCDC_MEMOR_BIG		(0 << 31)
+#define			AT91_LCDC_MEMOR_LITTLE		(1 << 31)
+
+#define AT91_LCDC_TIM1		0x0808		/* LCD Timing Register 1 */
+#define		AT91_LCDC_VFP		(0xff <<  0)	/* Vertical Front Porch */
+#define		AT91_LCDC_VBP		(0xff <<  8)	/* Vertical Back Porch */
+#define		AT91_LCDC_VPW		(0x3f << 16)	/* Vertical Synchronization Pulse Width */
+#define		AT91_LCDC_VHDLY		(0xf  << 24)	/* Vertical to Horizontal Delay */
+
+#define AT91_LCDC_TIM2		0x080c		/* LCD Timing Register 2 */
+#define		AT91_LCDC_HBP		(0xff  <<  0)	/* Horizontal Back Porch */
+#define		AT91_LCDC_HPW		(0x3f  <<  8)	/* Horizontal Synchronization Pulse Width */
+#define		AT91_LCDC_HFP		(0x7ff << 21)	/* Horizontal Front Porch */
+
+#define AT91_LCDC_LCDFRMCFG	0x0810		/* LCD Frame Configuration Register */
+#define		AT91_LCDC_LINEVAL	(0x7ff <<  0)	/* Vertical Size of LCD Module */
+#define		AT91_LCDC_HOZVAL	(0x7ff << 21)	/* Horizontal Size of LCD Module */
+
+#define AT91_LCDC_FIFO		0x0814		/* LCD FIFO Register */
+#define		AT91_LCDC_FIFOTH	(0xffff)	/* FIFO Threshold */
+
+#define AT91_LCDC_DP1_2		0x081c		/* Dithering Pattern DP1_2 Register */
+#define AT91_LCDC_DP4_7		0x0820		/* Dithering Pattern DP4_7 Register */
+#define AT91_LCDC_DP3_5		0x0824		/* Dithering Pattern DP3_5 Register */
+#define AT91_LCDC_DP2_3		0x0828		/* Dithering Pattern DP2_3 Register */
+#define AT91_LCDC_DP5_7		0x082c		/* Dithering Pattern DP5_7 Register */
+#define AT91_LCDC_DP3_4		0x0830		/* Dithering Pattern DP3_4 Register */
+#define AT91_LCDC_DP4_5		0x0834		/* Dithering Pattern DP4_5 Register */
+#define AT91_LCDC_DP6_7		0x0838		/* Dithering Pattern DP6_7 Register */
+#define		AT91_LCDC_DP1_2_VAL	(0xff)
+#define		AT91_LCDC_DP4_7_VAL	(0xfffffff)
+#define		AT91_LCDC_DP3_5_VAL	(0xfffff)
+#define		AT91_LCDC_DP2_3_VAL	(0xfff)
+#define		AT91_LCDC_DP5_7_VAL	(0xfffffff)
+#define		AT91_LCDC_DP3_4_VAL	(0xffff)
+#define		AT91_LCDC_DP4_5_VAL	(0xfffff)
+#define		AT91_LCDC_DP6_7_VAL	(0xfffffff)
+
+#define AT91_LCDC_PWRCON	0x083c		/* Power Control Register */
+#define		AT91_LCDC_PWR		(1    <<  0)	/* LCD Module Power Control */
+#define		AT91_LCDC_GUARDT	(0x7f <<  1)	/* Delay in Frame Period */
+#define		AT91_LCDC_BUSY		(1    << 31)	/* LCD Busy */
+
+#define AT91_LCDC_CONTRAST_CTR	0x0840		/* Contrast Control Register */
+#define		AT91_LCDC_PS		(3 << 0)	/* Contrast Counter Prescaler */
+#define			AT91_LCDC_PS_DIV1		(0 << 0)
+#define			AT91_LCDC_PS_DIV2		(1 << 0)
+#define			AT91_LCDC_PS_DIV4		(2 << 0)
+#define			AT91_LCDC_PS_DIV8		(3 << 0)
+#define		AT91_LCDC_POL		(1 << 2)	/* Polarity of output Pulse */
+#define			AT91_LCDC_POL_NEGATIVE		(0 << 2)
+#define			AT91_LCDC_POL_POSITIVE		(1 << 2)
+#define		AT91_LCDC_ENA		(1 << 3)	/* PWM generator Control */
+#define			AT91_LCDC_ENA_PWMDISABLE	(0 << 3)
+#define			AT91_LCDC_ENA_PWMENABLE		(1 << 3)
+
+#define AT91_LCDC_CONTRAST_VAL	0x0844		/* Contrast Value Register */
+#define		AT91_LCDC_CVAL		(0xff)		/* PWM compare value */
+
+#define AT91_LCDC_IER		0x0848		/* Interrupt Enable Register */
+#define AT91_LCDC_IDR		0x084c		/* Interrupt Disable Register */
+#define AT91_LCDC_IMR		0x0850		/* Interrupt Mask Register */
+#define AT91_LCDC_ISR		0x0854		/* Interrupt Enable Register */
+#define AT91_LCDC_ICR		0x0858		/* Interrupt Clear Register */
+#define		AT91_LCDC_LNI		(1 << 0)	/* Line Interrupt */
+#define		AT91_LCDC_LSTLNI	(1 << 1)	/* Last Line Interrupt */
+#define		AT91_LCDC_EOFI		(1 << 2)	/* DMA End Of Frame Interrupt */
+#define		AT91_LCDC_UFLWI		(1 << 4)	/* FIFO Underflow Interrupt */
+#define		AT91_LCDC_OWRI		(1 << 5)	/* FIFO Overwrite Interrupt */
+#define		AT91_LCDC_MERI		(1 << 6)	/* DMA Memory Error Interrupt */
+
+#define AT91_LCDC_LUT_(n)	(0x0c00 + ((n)*4))	/* Palette Entry 0..255 */
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91_mci.h b/include/asm-arm/arch-at91/at91_mci.h
new file mode 100644
index 0000000..40a9876
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91_mci.h
@@ -0,0 +1,106 @@
+/*
+ * include/asm-arm/arch-at91/at91_mci.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * MultiMedia Card Interface (MCI) registers.
+ * Based on AT91RM9200 datasheet revision F.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_MCI_H
+#define AT91_MCI_H
+
+#define AT91_MCI_CR		0x00		/* Control Register */
+#define		AT91_MCI_MCIEN		(1 <<  0)	/* Multi-Media Interface Enable */
+#define		AT91_MCI_MCIDIS		(1 <<  1)	/* Multi-Media Interface Disable */
+#define		AT91_MCI_PWSEN		(1 <<  2)	/* Power Save Mode Enable */
+#define		AT91_MCI_PWSDIS		(1 <<  3)	/* Power Save Mode Disable */
+#define		AT91_MCI_SWRST		(1 <<  7)	/* Software Reset */
+
+#define AT91_MCI_MR		0x04		/* Mode Register */
+#define		AT91_MCI_CLKDIV		(0xff  <<  0)	/* Clock Divider */
+#define		AT91_MCI_PWSDIV		(7     <<  8)	/* Power Saving Divider */
+#define		AT91_MCI_PDCPADV	(1     << 14)	/* PDC Padding Value */
+#define		AT91_MCI_PDCMODE	(1     << 15)	/* PDC-orientated Mode */
+#define		AT91_MCI_BLKLEN		(0xfff << 18)	/* Data Block Length */
+
+#define AT91_MCI_DTOR		0x08		/* Data Timeout Register */
+#define		AT91_MCI_DTOCYC		(0xf << 0)	/* Data Timeout Cycle Number */
+#define		AT91_MCI_DTOMUL		(7   << 4)	/* Data Timeout Multiplier */
+#define		AT91_MCI_DTOMUL_1		(0 <<  4)
+#define		AT91_MCI_DTOMUL_16		(1 <<  4)
+#define		AT91_MCI_DTOMUL_128		(2 <<  4)
+#define		AT91_MCI_DTOMUL_256		(3 <<  4)
+#define		AT91_MCI_DTOMUL_1K		(4 <<  4)
+#define		AT91_MCI_DTOMUL_4K		(5 <<  4)
+#define		AT91_MCI_DTOMUL_64K		(6 <<  4)
+#define		AT91_MCI_DTOMUL_1M		(7 <<  4)
+
+#define AT91_MCI_SDCR		0x0c		/* SD Card Register */
+#define		AT91_MCI_SDCSEL		(3 << 0)	/* SD Card Selector */
+#define		AT91_MCI_SDCBUS		(1 << 7)	/* 1-bit or 4-bit bus */
+
+#define AT91_MCI_ARGR		0x10		/* Argument Register */
+
+#define AT91_MCI_CMDR		0x14		/* Command Register */
+#define		AT91_MCI_CMDNB		(0x3f << 0)	/* Command Number */
+#define		AT91_MCI_RSPTYP		(3    << 6)	/* Response Type */
+#define			AT91_MCI_RSPTYP_NONE	(0 <<  6)
+#define			AT91_MCI_RSPTYP_48	(1 <<  6)
+#define			AT91_MCI_RSPTYP_136	(2 <<  6)
+#define		AT91_MCI_SPCMD		(7    << 8)	/* Special Command */
+#define			AT91_MCI_SPCMD_NONE	(0 <<  8)
+#define			AT91_MCI_SPCMD_INIT	(1 <<  8)
+#define			AT91_MCI_SPCMD_SYNC	(2 <<  8)
+#define			AT91_MCI_SPCMD_ICMD	(4 <<  8)
+#define			AT91_MCI_SPCMD_IRESP	(5 <<  8)
+#define		AT91_MCI_OPDCMD		(1 << 11)	/* Open Drain Command */
+#define		AT91_MCI_MAXLAT		(1 << 12)	/* Max Latency for Command to Response */
+#define		AT91_MCI_TRCMD		(3 << 16)	/* Transfer Command */
+#define			AT91_MCI_TRCMD_NONE	(0 << 16)
+#define			AT91_MCI_TRCMD_START	(1 << 16)
+#define			AT91_MCI_TRCMD_STOP	(2 << 16)
+#define		AT91_MCI_TRDIR		(1 << 18)	/* Transfer Direction */
+#define		AT91_MCI_TRTYP		(3 << 19)	/* Transfer Type */
+#define			AT91_MCI_TRTYP_BLOCK	(0 << 19)
+#define			AT91_MCI_TRTYP_MULTIPLE	(1 << 19)
+#define			AT91_MCI_TRTYP_STREAM	(2 << 19)
+
+#define AT91_MCI_RSPR(n)	(0x20 + ((n) * 4))	/* Response Registers 0-3 */
+#define AT91_MCR_RDR		0x30		/* Receive Data Register */
+#define AT91_MCR_TDR		0x34		/* Transmit Data Register */
+
+#define AT91_MCI_SR		0x40		/* Status Register */
+#define		AT91_MCI_CMDRDY		(1 <<  0)	/* Command Ready */
+#define		AT91_MCI_RXRDY		(1 <<  1)	/* Receiver Ready */
+#define		AT91_MCI_TXRDY		(1 <<  2)	/* Transmit Ready */
+#define		AT91_MCI_BLKE		(1 <<  3)	/* Data Block Ended */
+#define		AT91_MCI_DTIP		(1 <<  4)	/* Data Transfer in Progress */
+#define		AT91_MCI_NOTBUSY	(1 <<  5)	/* Data Not Busy */
+#define		AT91_MCI_ENDRX		(1 <<  6)	/* End of RX Buffer */
+#define		AT91_MCI_ENDTX		(1 <<  7)	/* End fo TX Buffer */
+#define		AT91_MCI_SDIOIRQA	(1 <<  8)	/* SDIO Interrupt for Slot A */
+#define		At91_MCI_SDIOIRQB	(1 <<  9)	/* SDIO Interrupt for Slot B [AT91RM9200 only] */
+#define		AT91_MCI_RXBUFF		(1 << 14)	/* RX Buffer Full */
+#define		AT91_MCI_TXBUFE		(1 << 15)	/* TX Buffer Empty */
+#define		AT91_MCI_RINDE		(1 << 16)	/* Response Index Error */
+#define		AT91_MCI_RDIRE		(1 << 17)	/* Response Direction Error */
+#define		AT91_MCI_RCRCE		(1 << 18)	/* Response CRC Error */
+#define		AT91_MCI_RENDE		(1 << 19)	/* Response End Bit Error */
+#define		AT91_MCI_RTOE		(1 << 20)	/* Reponse Time-out Error */
+#define		AT91_MCI_DCRCE		(1 << 21)	/* Data CRC Error */
+#define		AT91_MCI_DTOE		(1 << 22)	/* Data Time-out Error */
+#define		AT91_MCI_OVRE		(1 << 30)	/* Overrun */
+#define		AT91_MCI_UNRE		(1 << 31)	/* Underrun */
+
+#define AT91_MCI_IER		0x44		/* Interrupt Enable Register */
+#define AT91_MCI_IDR		0x48		/* Interrupt Disable Register */
+#define AT91_MCI_IMR		0x4c		/* Interrupt Mask Register */
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91_pdc.h b/include/asm-arm/arch-at91/at91_pdc.h
new file mode 100644
index 0000000..a54adf5
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91_pdc.h
@@ -0,0 +1,36 @@
+/*
+ * include/asm-arm/arch-at91/at91_pdc.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Peripheral Data Controller (PDC) registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_PDC_H
+#define AT91_PDC_H
+
+#define AT91_PDC_RPR		0x100	/* Receive Pointer Register */
+#define AT91_PDC_RCR		0x104	/* Receive Counter Register */
+#define AT91_PDC_TPR		0x108	/* Transmit Pointer Register */
+#define AT91_PDC_TCR		0x10c	/* Transmit Counter Register */
+#define AT91_PDC_RNPR		0x110	/* Receive Next Pointer Register */
+#define AT91_PDC_RNCR		0x114	/* Receive Next Counter Register */
+#define AT91_PDC_TNPR		0x118	/* Transmit Next Pointer Register */
+#define AT91_PDC_TNCR		0x11c	/* Transmit Next Counter Register */
+
+#define AT91_PDC_PTCR		0x120	/* Transfer Control Register */
+#define		AT91_PDC_RXTEN		(1 << 0)	/* Receiver Transfer Enable */
+#define		AT91_PDC_RXTDIS		(1 << 1)	/* Receiver Transfer Disable */
+#define		AT91_PDC_TXTEN		(1 << 8)	/* Transmitter Transfer Enable */
+#define		AT91_PDC_TXTDIS		(1 << 9)	/* Transmitter Transfer Disable */
+
+#define AT91_PDC_PTSR		0x124	/* Transfer Status Register */
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91_pio.h b/include/asm-arm/arch-at91/at91_pio.h
new file mode 100644
index 0000000..84c3866
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91_pio.h
@@ -0,0 +1,49 @@
+/*
+ * include/asm-arm/arch-at91/at91_pio.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Parallel I/O Controller (PIO) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_PIO_H
+#define AT91_PIO_H
+
+#define PIO_PER		0x00	/* Enable Register */
+#define PIO_PDR		0x04	/* Disable Register */
+#define PIO_PSR		0x08	/* Status Register */
+#define PIO_OER		0x10	/* Output Enable Register */
+#define PIO_ODR		0x14	/* Output Disable Register */
+#define PIO_OSR		0x18	/* Output Status Register */
+#define PIO_IFER	0x20	/* Glitch Input Filter Enable */
+#define PIO_IFDR	0x24	/* Glitch Input Filter Disable */
+#define PIO_IFSR	0x28	/* Glitch Input Filter Status */
+#define PIO_SODR	0x30	/* Set Output Data Register */
+#define PIO_CODR	0x34	/* Clear Output Data Register */
+#define PIO_ODSR	0x38	/* Output Data Status Register */
+#define PIO_PDSR	0x3c	/* Pin Data Status Register */
+#define PIO_IER		0x40	/* Interrupt Enable Register */
+#define PIO_IDR		0x44	/* Interrupt Disable Register */
+#define PIO_IMR		0x48	/* Interrupt Mask Register */
+#define PIO_ISR		0x4c	/* Interrupt Status Register */
+#define PIO_MDER	0x50	/* Multi-driver Enable Register */
+#define PIO_MDDR	0x54	/* Multi-driver Disable Register */
+#define PIO_MDSR	0x58	/* Multi-driver Status Register */
+#define PIO_PUDR	0x60	/* Pull-up Disable Register */
+#define PIO_PUER	0x64	/* Pull-up Enable Register */
+#define PIO_PUSR	0x68	/* Pull-up Status Register */
+#define PIO_ASR		0x70	/* Peripheral A Select Register */
+#define PIO_BSR		0x74	/* Peripheral B Select Register */
+#define PIO_ABSR	0x78	/* AB Status Register */
+#define PIO_OWER	0xa0	/* Output Write Enable Register */
+#define PIO_OWDR	0xa4	/* Output Write Disable Register */
+#define PIO_OWSR	0xa8	/* Output Write Status Register */
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91_pit.h b/include/asm-arm/arch-at91/at91_pit.h
new file mode 100644
index 0000000..5026325
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91_pit.h
@@ -0,0 +1,29 @@
+/*
+ * include/asm-arm/arch-at91/at91_pit.h
+ *
+ * Periodic Interval Timer (PIT) - System peripherals regsters.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_PIT_H
+#define AT91_PIT_H
+
+#define AT91_PIT_MR		(AT91_PIT + 0x00)	/* Mode Register */
+#define		AT91_PIT_PITIEN		(1 << 25)		/* Timer Interrupt Enable */
+#define		AT91_PIT_PITEN		(1 << 24)		/* Timer Enabled */
+#define		AT91_PIT_PIV		(0xfffff)		/* Periodic Interval Value */
+
+#define AT91_PIT_SR		(AT91_PIT + 0x04)	/* Status Register */
+#define		AT91_PIT_PITS		(1 << 0)		/* Timer Status */
+
+#define AT91_PIT_PIVR		(AT91_PIT + 0x08)	/* Periodic Interval Value Register */
+#define AT91_PIT_PIIR		(AT91_PIT + 0x0c)	/* Periodic Interval Image Register */
+#define		AT91_PIT_PICNT		(0xfff << 20)		/* Interval Counter */
+#define		AT91_PIT_CPIV		(0xfffff)		/* Inverval Value */
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91_pmc.h b/include/asm-arm/arch-at91/at91_pmc.h
new file mode 100644
index 0000000..33ff5b6
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91_pmc.h
@@ -0,0 +1,92 @@
+/*
+ * include/asm-arm/arch-at91/at91_pmc.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Power Management Controller (PMC) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_PMC_H
+#define AT91_PMC_H
+
+#define	AT91_PMC_SCER		(AT91_PMC + 0x00)	/* System Clock Enable Register */
+#define	AT91_PMC_SCDR		(AT91_PMC + 0x04)	/* System Clock Disable Register */
+
+#define	AT91_PMC_SCSR		(AT91_PMC + 0x08)	/* System Clock Status Register */
+#define		AT91_PMC_PCK		(1 <<  0)		/* Processor Clock */
+#define		AT91RM9200_PMC_UDP	(1 <<  1)		/* USB Devcice Port Clock [AT91RM9200 only] */
+#define		AT91RM9200_PMC_MCKUDP	(1 <<  2)		/* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
+#define		AT91RM9200_PMC_UHP	(1 <<  4)		/* USB Host Port Clock [AT91RM9200 only] */
+#define		AT91SAM926x_PMC_UHP	(1 <<  6)		/* USB Host Port Clock [AT91SAM926x only] */
+#define		AT91SAM926x_PMC_UDP	(1 <<  7)		/* USB Devcice Port Clock [AT91SAM926x only] */
+#define		AT91_PMC_PCK0		(1 <<  8)		/* Programmable Clock 0 */
+#define		AT91_PMC_PCK1		(1 <<  9)		/* Programmable Clock 1 */
+#define		AT91_PMC_PCK2		(1 << 10)		/* Programmable Clock 2 */
+#define		AT91_PMC_PCK3		(1 << 11)		/* Programmable Clock 3 */
+#define		AT91_PMC_HCK0		(1 << 16)		/* AHB Clock (USB host) [AT91SAM9261 only] */
+#define		AT91_PMC_HCK1		(1 << 17)		/* AHB Clock (LCD) [AT91SAM9261 only] */
+
+#define	AT91_PMC_PCER		(AT91_PMC + 0x10)	/* Peripheral Clock Enable Register */
+#define	AT91_PMC_PCDR		(AT91_PMC + 0x14)	/* Peripheral Clock Disable Register */
+#define	AT91_PMC_PCSR		(AT91_PMC + 0x18)	/* Peripheral Clock Status Register */
+
+#define	AT91_CKGR_MOR		(AT91_PMC + 0x20)	/* Main Oscillator Register */
+#define		AT91_PMC_MOSCEN		(1    << 0)		/* Main Oscillator Enable */
+#define		AT91_PMC_OSCBYPASS	(1    << 1)		/* Oscillator Bypass [AT91SAM926x only] */
+#define		AT91_PMC_OSCOUNT	(0xff << 8)		/* Main Oscillator Start-up Time */
+
+#define	AT91_CKGR_MCFR		(AT91_PMC + 0x24)	/* Main Clock Frequency Register */
+#define		AT91_PMC_MAINF		(0xffff <<  0)		/* Main Clock Frequency */
+#define		AT91_PMC_MAINRDY	(1	<< 16)		/* Main Clock Ready */
+
+#define	AT91_CKGR_PLLAR		(AT91_PMC + 0x28)	/* PLL A Register */
+#define	AT91_CKGR_PLLBR		(AT91_PMC + 0x2c)	/* PLL B Register */
+#define		AT91_PMC_DIV		(0xff  <<  0)		/* Divider */
+#define		AT91_PMC_PLLCOUNT	(0x3f  <<  8)		/* PLL Counter */
+#define		AT91_PMC_OUT		(3     << 14)		/* PLL Clock Frequency Range */
+#define		AT91_PMC_MUL		(0x7ff << 16)		/* PLL Multiplier */
+#define		AT91_PMC_USB96M		(1     << 28)		/* Divider by 2 Enable (PLLB only) */
+
+#define	AT91_PMC_MCKR		(AT91_PMC + 0x30)	/* Master Clock Register */
+#define		AT91_PMC_CSS		(3 <<  0)		/* Master Clock Selection */
+#define			AT91_PMC_CSS_SLOW		(0 << 0)
+#define			AT91_PMC_CSS_MAIN		(1 << 0)
+#define			AT91_PMC_CSS_PLLA		(2 << 0)
+#define			AT91_PMC_CSS_PLLB		(3 << 0)
+#define		AT91_PMC_PRES		(7 <<  2)		/* Master Clock Prescaler */
+#define			AT91_PMC_PRES_1			(0 << 2)
+#define			AT91_PMC_PRES_2			(1 << 2)
+#define			AT91_PMC_PRES_4			(2 << 2)
+#define			AT91_PMC_PRES_8			(3 << 2)
+#define			AT91_PMC_PRES_16		(4 << 2)
+#define			AT91_PMC_PRES_32		(5 << 2)
+#define			AT91_PMC_PRES_64		(6 << 2)
+#define		AT91_PMC_MDIV		(3 <<  8)		/* Master Clock Division */
+#define			AT91_PMC_MDIV_1			(0 << 8)
+#define			AT91_PMC_MDIV_2			(1 << 8)
+#define			AT91_PMC_MDIV_3			(2 << 8)
+#define			AT91_PMC_MDIV_4			(3 << 8)
+
+#define	AT91_PMC_PCKR(n)	(AT91_PMC + 0x40 + ((n) * 4))	/* Programmable Clock 0-3 Registers */
+
+#define	AT91_PMC_IER		(AT91_PMC + 0x60)	/* Interrupt Enable Register */
+#define	AT91_PMC_IDR		(AT91_PMC + 0x64)	/* Interrupt Disable Register */
+#define	AT91_PMC_SR		(AT91_PMC + 0x68)	/* Status Register */
+#define		AT91_PMC_MOSCS		(1 <<  0)		/* MOSCS Flag */
+#define		AT91_PMC_LOCKA		(1 <<  1)		/* PLLA Lock */
+#define		AT91_PMC_LOCKB		(1 <<  2)		/* PLLB Lock */
+#define		AT91_PMC_MCKRDY		(1 <<  3)		/* Master Clock */
+#define		AT91_PMC_PCK0RDY	(1 <<  8)		/* Programmable Clock 0 */
+#define		AT91_PMC_PCK1RDY	(1 <<  9)		/* Programmable Clock 1 */
+#define		AT91_PMC_PCK2RDY	(1 << 10)		/* Programmable Clock 2 */
+#define		AT91_PMC_PCK3RDY	(1 << 11)		/* Programmable Clock 3 */
+#define	AT91_PMC_IMR		(AT91_PMC + 0x6c)	/* Interrupt Mask Register */
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91_rstc.h b/include/asm-arm/arch-at91/at91_rstc.h
new file mode 100644
index 0000000..0b7afbc
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91_rstc.h
@@ -0,0 +1,39 @@
+/*
+ * include/asm-arm/arch-at91/at91_rstc.h
+ *
+ * Reset Controller (RSTC) - System peripherals regsters.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_RSTC_H
+#define AT91_RSTC_H
+
+#define AT91_RSTC_CR		(AT91_RSTC + 0x00)	/* Reset Controller Control Register */
+#define		AT91_RSTC_PROCRST	(1 << 0)		/* Processor Reset */
+#define		AT91_RSTC_PERRST	(1 << 2)		/* Peripheral Reset */
+#define		AT91_RSTC_EXTRST	(1 << 3)		/* External Reset */
+#define		AT91_RSTC_KEY		(0xff << 24)		/* KEY Password */
+
+#define AT91_RSTC_SR		(AT91_RSTC + 0x04)	/* Reset Controller Status Register */
+#define		AT91_RSTC_URSTS		(1 << 0)		/* User Reset Status */
+#define		AT91_RSTC_RSTTYP	(7 << 8)		/* Reset Type */
+#define			AT91_RSTC_RSTTYP_GENERAL	(0 << 8)
+#define			AT91_RSTC_RSTTYP_WAKEUP		(1 << 8)
+#define			AT91_RSTC_RSTTYP_WATCHDOG	(2 << 8)
+#define			AT91_RSTC_RSTTYP_SOFTWARE	(3 << 8)
+#define			AT91_RSTC_RSTTYP_USER	(4 << 8)
+#define		AT91_RSTC_NRSTL		(1 << 16)		/* NRST Pin Level */
+#define		AT91_RSTC_SRCMP		(1 << 17)		/* Software Reset Command in Progress */
+
+#define AT91_RSTC_MR		(AT91_RSTC + 0x08)	/* Reset Controller Mode Register */
+#define		AT91_RSTC_URSTEN	(1 << 0)		/* User Reset Enable */
+#define		AT91_RSTC_URSTIEN	(1 << 4)		/* User Reset Interrupt Enable */
+#define		AT91_RSTC_ERSTL		(0xf << 8)		/* External Reset Length */
+#define		AT91_RSTC_KEY		(0xff << 24)		/* KEY Password */
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91_rtc.h b/include/asm-arm/arch-at91/at91_rtc.h
new file mode 100644
index 0000000..af9bd28
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91_rtc.h
@@ -0,0 +1,75 @@
+/*
+ * include/asm-arm/arch-at91/at91_rtc.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Real Time Clock (RTC) - System peripheral registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_RTC_H
+#define AT91_RTC_H
+
+#define	AT91_RTC_CR		(AT91_RTC + 0x00)	/* Control Register */
+#define		AT91_RTC_UPDTIM		(1 <<  0)		/* Update Request Time Register */
+#define		AT91_RTC_UPDCAL		(1 <<  1)		/* Update Request Calendar Register */
+#define		AT91_RTC_TIMEVSEL	(3 <<  8)		/* Time Event Selection */
+#define			AT91_RTC_TIMEVSEL_MINUTE	(0 << 8)
+#define			AT91_RTC_TIMEVSEL_HOUR		(1 << 8)
+#define			AT91_RTC_TIMEVSEL_DAY24		(2 << 8)
+#define			AT91_RTC_TIMEVSEL_DAY12		(3 << 8)
+#define		AT91_RTC_CALEVSEL	(3 << 16)		/* Calendar Event Selection */
+#define			AT91_RTC_CALEVSEL_WEEK		(0 << 16)
+#define			AT91_RTC_CALEVSEL_MONTH		(1 << 16)
+#define			AT91_RTC_CALEVSEL_YEAR		(2 << 16)
+
+#define	AT91_RTC_MR		(AT91_RTC + 0x04)	/* Mode Register */
+#define			AT91_RTC_HRMOD		(1 <<  0)		/* 12/24 Hour Mode */
+
+#define	AT91_RTC_TIMR		(AT91_RTC + 0x08)	/* Time Register */
+#define		AT91_RTC_SEC		(0x7f <<  0)		/* Current Second */
+#define		AT91_RTC_MIN		(0x7f <<  8)		/* Current Minute */
+#define		AT91_RTC_HOUR		(0x3f << 16)		/* Current Hour */
+#define		AT91_RTC_AMPM		(1    << 22)		/* Ante Meridiem Post Meridiem Indicator */
+
+#define	AT91_RTC_CALR		(AT91_RTC + 0x0c)	/* Calendar Register */
+#define		AT91_RTC_CENT		(0x7f <<  0)		/* Current Century */
+#define		AT91_RTC_YEAR		(0xff <<  8)		/* Current Year */
+#define		AT91_RTC_MONTH		(0x1f << 16)		/* Current Month */
+#define		AT91_RTC_DAY		(7    << 21)		/* Current Day */
+#define		AT91_RTC_DATE		(0x3f << 24)		/* Current Date */
+
+#define	AT91_RTC_TIMALR		(AT91_RTC + 0x10)	/* Time Alarm Register */
+#define		AT91_RTC_SECEN		(1 <<  7)		/* Second Alarm Enable */
+#define		AT91_RTC_MINEN		(1 << 15)		/* Minute Alarm Enable */
+#define		AT91_RTC_HOUREN		(1 << 23)		/* Hour Alarm Enable */
+
+#define	AT91_RTC_CALALR		(AT91_RTC + 0x14)	/* Calendar Alarm Register */
+#define		AT91_RTC_MTHEN		(1 << 23)		/* Month Alarm Enable */
+#define		AT91_RTC_DATEEN		(1 << 31)		/* Date Alarm Enable */
+
+#define	AT91_RTC_SR		(AT91_RTC + 0x18)	/* Status Register */
+#define		AT91_RTC_ACKUPD		(1 <<  0)		/* Acknowledge for Update */
+#define		AT91_RTC_ALARM		(1 <<  1)		/* Alarm Flag */
+#define		AT91_RTC_SECEV		(1 <<  2)		/* Second Event */
+#define		AT91_RTC_TIMEV		(1 <<  3)		/* Time Event */
+#define		AT91_RTC_CALEV		(1 <<  4)		/* Calendar Event */
+
+#define	AT91_RTC_SCCR		(AT91_RTC + 0x1c)	/* Status Clear Command Register */
+#define	AT91_RTC_IER		(AT91_RTC + 0x20)	/* Interrupt Enable Register */
+#define	AT91_RTC_IDR		(AT91_RTC + 0x24)	/* Interrupt Disable Register */
+#define	AT91_RTC_IMR		(AT91_RTC + 0x28)	/* Interrupt Mask Register */
+
+#define	AT91_RTC_VER		(AT91_RTC + 0x2c)	/* Valid Entry Register */
+#define		AT91_RTC_NVTIM		(1 <<  0)		/* Non valid Time */
+#define		AT91_RTC_NVCAL		(1 <<  1)		/* Non valid Calendar */
+#define		AT91_RTC_NVTIMALR	(1 <<  2)		/* Non valid Time Alarm */
+#define		AT91_RTC_NVCALALR	(1 <<  3)		/* Non valid Calendar Alarm */
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91_rtt.h b/include/asm-arm/arch-at91/at91_rtt.h
new file mode 100644
index 0000000..bae1103
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91_rtt.h
@@ -0,0 +1,32 @@
+/*
+ * include/asm-arm/arch-at91/at91_rtt.h
+ *
+ * Real-time Timer (RTT) - System peripherals regsters.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_RTT_H
+#define AT91_RTT_H
+
+#define AT91_RTT_MR		(AT91_RTT + 0x00)	/* Real-time Mode Register */
+#define		AT91_RTT_RTPRES		(0xffff << 0)		/* Real-time Timer Prescaler Value */
+#define		AT91_RTT_ALMIEN		(1 << 16)		/* Alarm Interrupt Enable */
+#define		AT91_RTT_RTTINCIEN	(1 << 17)		/* Real Time Timer Increment Interrupt Enable */
+#define		AT91_RTT_RTTRST		(1 << 18)		/* Real Time Timer Restart */
+
+#define AT91_RTT_AR		(AT91_RTT + 0x04)	/* Real-time Alarm Register */
+#define		AT91_RTT_ALMV		(0xffffffff)		/* Alarm Value */
+
+#define AT91_RTT_VR		(AT91_RTT + 0x08)	/* Real-time Value Register */
+#define		AT91_RTT_CRTV		(0xffffffff)		/* Current Real-time Value */
+
+#define AT91_RTT_SR		(AT91_RTT + 0x0c)	/* Real-time Status Register */
+#define		AT91_RTT_ALMS		(1 << 0)		/* Real-time Alarm Status */
+#define		AT91_RTT_RTTINC		(1 << 1)		/* Real-time Timer Increment */
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91_shdwc.h b/include/asm-arm/arch-at91/at91_shdwc.h
new file mode 100644
index 0000000..795fcc2
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91_shdwc.h
@@ -0,0 +1,33 @@
+/*
+ * include/asm-arm/arch-at91/at91_shdwc.h
+ *
+ * Shutdown Controller (SHDWC) - System peripherals regsters.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_SHDWC_H
+#define AT91_SHDWC_H
+
+#define AT91_SHDW_CR		(AT91_SHDWC + 0x00)	/* Shut Down Control Register */
+#define		AT91_SHDW_SHDW		(1    << 0)		/* Processor Reset */
+#define		AT91_SHDW_KEY		(0xff << 24)		/* KEY Password */
+
+#define AT91_SHDW_MR		(AT91_SHDWC + 0x04)	/* Shut Down Mode Register */
+#define		AT91_SHDW_WKMODE0	(3 << 0)		/* Wake-up 0 Mode Selection */
+#define			AT91_SHDW_WKMODE0_NONE		0
+#define			AT91_SHDW_WKMODE0_HIGH		1
+#define			AT91_SHDW_WKMODE0_LOW		2
+#define			AT91_SHDW_WKMODE0_ANYLEVEL	3
+#define		AT91_SHDW_CPTWK0	(0xf << 4)		/* Counter On Wake Up 0 */
+#define		AT91_SHDW_RTTWKEN	(1   << 16)		/* Real Time Timer Wake-up Enable */
+
+#define AT91_SHDW_SR		(AT91_SHDWC + 0x08)	/* Shut Down Status Register */
+#define		AT91_SHDW_WAKEUP0	(1 <<  0)		/* Wake-up 0 Status */
+#define		AT91_SHDW_RTTWK		(1 << 16)		/* Real-time Timer Wake-up */
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91_spi.h b/include/asm-arm/arch-at91/at91_spi.h
new file mode 100644
index 0000000..f9b9a84
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91_spi.h
@@ -0,0 +1,81 @@
+/*
+ * include/asm-arm/arch-at91/at91_spi.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Serial Peripheral Interface (SPI) registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_SPI_H
+#define AT91_SPI_H
+
+#define AT91_SPI_CR			0x00		/* Control Register */
+#define		AT91_SPI_SPIEN		(1 <<  0)		/* SPI Enable */
+#define		AT91_SPI_SPIDIS		(1 <<  1)		/* SPI Disable */
+#define		AT91_SPI_SWRST		(1 <<  7)		/* SPI Software Reset */
+#define		AT91_SPI_LASTXFER	(1 << 24)		/* Last Transfer [SAM9261 only] */
+
+#define AT91_SPI_MR			0x04		/* Mode Register */
+#define		AT91_SPI_MSTR		(1    <<  0)		/* Master/Slave Mode */
+#define		AT91_SPI_PS		(1    <<  1)		/* Peripheral Select */
+#define			AT91_SPI_PS_FIXED	(0 << 1)
+#define			AT91_SPI_PS_VARIABLE	(1 << 1)
+#define		AT91_SPI_PCSDEC		(1    <<  2)		/* Chip Select Decode */
+#define		AT91_SPI_DIV32		(1    <<  3)		/* Clock Selection [AT91RM9200 only] */
+#define		AT91_SPI_MODFDIS	(1    <<  4)		/* Mode Fault Detection */
+#define		AT91_SPI_LLB		(1    <<  7)		/* Local Loopback Enable */
+#define		AT91_SPI_PCS		(0xf  << 16)		/* Peripheral Chip Select */
+#define		AT91_SPI_DLYBCS		(0xff << 24)		/* Delay Between Chip Selects */
+
+#define AT91_SPI_RDR		0x08			/* Receive Data Register */
+#define		AT91_SPI_RD		(0xffff <<  0)		/* Receive Data */
+#define		AT91_SPI_PCS		(0xf	<< 16)		/* Peripheral Chip Select */
+
+#define AT91_SPI_TDR		0x0c			/* Transmit Data Register */
+#define		AT91_SPI_TD		(0xffff <<  0)		/* Transmit Data */
+#define		AT91_SPI_PCS		(0xf	<< 16)		/* Peripheral Chip Select */
+#define		AT91_SPI_LASTXFER	(1	<< 24)		/* Last Transfer [SAM9261 only] */
+
+#define AT91_SPI_SR		0x10			/* Status Register */
+#define		AT91_SPI_RDRF		(1 <<  0)		/* Receive Data Register Full */
+#define		AT91_SPI_TDRE		(1 <<  1)		/* Transmit Data Register Full */
+#define		AT91_SPI_MODF		(1 <<  2)		/* Mode Fault Error */
+#define		AT91_SPI_OVRES		(1 <<  3)		/* Overrun Error Status */
+#define		AT91_SPI_ENDRX		(1 <<  4)		/* End of RX buffer */
+#define		AT91_SPI_ENDTX		(1 <<  5)		/* End of TX buffer */
+#define		AT91_SPI_RXBUFF		(1 <<  6)		/* RX Buffer Full */
+#define		AT91_SPI_TXBUFE		(1 <<  7)		/* TX Buffer Empty */
+#define		AT91_SPI_NSSR		(1 <<  8)		/* NSS Rising [SAM9261 only] */
+#define		AT91_SPI_TXEMPTY	(1 <<  9)		/* Transmission Register Empty [SAM9261 only] */
+#define		AT91_SPI_SPIENS		(1 << 16)		/* SPI Enable Status */
+
+#define AT91_SPI_IER		0x14			/* Interrupt Enable Register */
+#define AT91_SPI_IDR		0x18			/* Interrupt Disable Register */
+#define AT91_SPI_IMR		0x1c			/* Interrupt Mask Register */
+
+#define AT91_SPI_CSR(n)		(0x30 + ((n) * 4))	/* Chip Select Registers 0-3 */
+#define		AT91_SPI_CPOL		(1    <<  0)		/* Clock Polarity */
+#define		AT91_SPI_NCPHA		(1    <<  1)		/* Clock Phase */
+#define		AT91_SPI_CSAAT		(1    <<  3)		/* Chip Select Active After Transfer [SAM9261 only] */
+#define		AT91_SPI_BITS		(0xf  <<  4)		/* Bits Per Transfer */
+#define			AT91_SPI_BITS_8		(0 << 4)
+#define			AT91_SPI_BITS_9		(1 << 4)
+#define			AT91_SPI_BITS_10	(2 << 4)
+#define			AT91_SPI_BITS_11	(3 << 4)
+#define			AT91_SPI_BITS_12	(4 << 4)
+#define			AT91_SPI_BITS_13	(5 << 4)
+#define			AT91_SPI_BITS_14	(6 << 4)
+#define			AT91_SPI_BITS_15	(7 << 4)
+#define			AT91_SPI_BITS_16	(8 << 4)
+#define		AT91_SPI_SCBR		(0xff <<  8)		/* Serial Clock Baud Rate */
+#define		AT91_SPI_DLYBS		(0xff << 16)		/* Delay before SPCK */
+#define		AT91_SPI_DLYBCT		(0xff << 24)		/* Delay between Consecutive Transfers */
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91_ssc.h b/include/asm-arm/arch-at91/at91_ssc.h
new file mode 100644
index 0000000..0ecc734
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91_ssc.h
@@ -0,0 +1,106 @@
+/*
+ * include/asm-arm/arch-at91/at91_ssc.h
+ *
+ * Copyright (C) SAN People
+ *
+ * Serial Synchronous Controller (SSC) registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_SSC_H
+#define AT91_SSC_H
+
+#define AT91_SSC_CR		0x00	/* Control Register */
+#define		AT91_SSC_RXEN		(1 <<  0)	/* Receive Enable */
+#define		AT91_SSC_RXDIS		(1 <<  1)	/* Receive Disable */
+#define		AT91_SSC_TXEN		(1 <<  8)	/* Transmit Enable */
+#define		AT91_SSC_TXDIS		(1 <<  9)	/* Transmit Disable */
+#define		AT91_SSC_SWRST		(1 << 15)	/* Software Reset */
+
+#define AT91_SSC_CMR		0x04	/* Clock Mode Register */
+#define		AT91_SSC_CMR_DIV	(0xfff << 0)	/* Clock Divider */
+
+#define AT91_SSC_RCMR		0x10	/* Receive Clock Mode Register */
+#define		AT91_SSC_CKS		(3    <<  0)	/* Clock Selection */
+#define			AT91_SSC_CKS_DIV		(0 << 0)
+#define			AT91_SSC_CKS_CLOCK		(1 << 0)
+#define			AT91_SSC_CKS_PIN		(2 << 0)
+#define		AT91_SSC_CKO		(7    <<  2)	/* Clock Output Mode Selection */
+#define			AT91_SSC_CKO_NONE		(0 << 2)
+#define			AT91_SSC_CKO_CONTINUOUS		(1 << 2)
+#define		AT91_SSC_CKI		(1    <<  5)	/* Clock Inversion */
+#define			AT91_SSC_CKI_FALLING		(0 << 5)
+#define			AT91_SSC_CK_RISING		(1 << 5)
+#define		AT91_SSC_CKG		(1    <<  6)	/* Receive Clock Gating Selection [AT91SAM9261 only] */
+#define			AT91_SSC_CKG_NONE		(0 << 6)
+#define			AT91_SSC_CKG_RFLOW		(1 << 6)
+#define			AT91_SSC_CKG_RFHIGH		(2 << 6)
+#define		AT91_SSC_START		(0xf  <<  8)	/* Start Selection */
+#define			AT91_SSC_START_CONTINUOUS	(0 << 8)
+#define			AT91_SSC_START_TX_RX		(1 << 8)
+#define			AT91_SSC_START_LOW_RF		(2 << 8)
+#define			AT91_SSC_START_HIGH_RF		(3 << 8)
+#define			AT91_SSC_START_FALLING_RF	(4 << 8)
+#define			AT91_SSC_START_RISING_RF	(5 << 8)
+#define			AT91_SSC_START_LEVEL_RF		(6 << 8)
+#define			AT91_SSC_START_EDGE_RF		(7 << 8)
+#define		AT91_SSC_STOP		(1    << 12)	/* Receive Stop Selection [AT91SAM9261 only] */
+#define		AT91_SSC_STTDLY		(0xff << 16)	/* Start Delay */
+#define		AT91_SSC_PERIOD		(0xff << 24)	/* Period Divider Selection */
+
+#define AT91_SSC_RFMR		0x14	/* Receive Frame Mode Register */
+#define		AT91_SSC_DATALEN	(0x1f <<  0)	/* Data Length */
+#define		AT91_SSC_LOOP		(1    <<  5)	/* Loop Mode */
+#define		AT91_SSC_MSBF		(1    <<  7)	/* Most Significant Bit First */
+#define		AT91_SSC_DATNB		(0xf  <<  8)	/* Data Number per Frame */
+#define		AT91_SSC_FSLEN		(0xf  << 16)	/* Frame Sync Length */
+#define		AT91_SSC_FSOS		(7    << 20)	/* Frame Sync Output Selection */
+#define			AT91_SSC_FSOS_NONE		(0 << 20)
+#define			AT91_SSC_FSOS_NEGATIVE		(1 << 20)
+#define			AT91_SSC_FSOS_POSITIVE		(2 << 20)
+#define			AT91_SSC_FSOS_LOW		(3 << 20)
+#define			AT91_SSC_FSOS_HIGH		(4 << 20)
+#define			AT91_SSC_FSOS_TOGGLE		(5 << 20)
+#define		AT91_SSC_FSEDGE		(1    << 24)	/* Frame Sync Edge Detection */
+#define			AT91_SSC_FSEDGE_POSITIVE	(0 << 24)
+#define			AT91_SSC_FSEDGE_NEGATIVE	(1 << 24)
+
+#define AT91_SSC_TCMR		0x18	/* Transmit Clock Mode Register */
+#define AT91_SSC_TFMR		0x1c	/* Transmit Fram Mode Register */
+#define		AT91_SSC_DATDEF		(1 <<  5)	/* Data Default Value */
+#define		AT91_SSC_FSDEN		(1 << 23)	/* Frame Sync Data Enable */
+
+#define AT91_SSC_RHR		0x20	/* Receive Holding Register */
+#define AT91_SSC_THR		0x24	/* Transmit Holding Register */
+#define AT91_SSC_RSHR		0x30	/* Receive Sync Holding Register */
+#define AT91_SSC_TSHR		0x34	/* Transmit Sync Holding Register */
+
+#define AT91_SSC_RC0R		0x38	/* Receive Compare 0 Register [AT91SAM9261 only] */
+#define AT91_SSC_RC1R		0x3c	/* Receive Compare 1 Register [AT91SAM9261 only] */
+
+#define AT91_SSC_SR		0x40	/* Status Register */
+#define		AT91_SSC_TXRDY		(1 <<  0)	/* Transmit Ready */
+#define		AT91_SSC_TXEMPTY	(1 <<  1)	/* Transmit Empty */
+#define		AT91_SSC_ENDTX		(1 <<  2)	/* End of Transmission */
+#define		AT91_SSC_TXBUFE		(1 <<  3)	/* Transmit Buffer Empty */
+#define		AT91_SSC_RXRDY		(1 <<  4)	/* Receive Ready */
+#define		AT91_SSC_OVRUN		(1 <<  5)	/* Receive Overrun */
+#define		AT91_SSC_ENDRX		(1 <<  6)	/* End of Reception */
+#define		AT91_SSC_RXBUFF		(1 <<  7)	/* Receive Buffer Full */
+#define		AT91_SSC_CP0		(1 <<  8)	/* Compare 0 [AT91SAM9261 only] */
+#define		AT91_SSC_CP1		(1 <<  9)	/* Compare 1 [AT91SAM9261 only] */
+#define		AT91_SSC_TXSYN		(1 << 10)	/* Transmit Sync */
+#define		AT91_SSC_RXSYN		(1 << 11)	/* Receive Sync */
+#define		AT91_SSC_TXENA		(1 << 16)	/* Transmit Enable */
+#define		AT91_SSC_RXENA		(1 << 17)	/* Receive Enable */
+
+#define AT91_SSC_IER		0x44	/* Interrupt Enable Register */
+#define AT91_SSC_IDR		0x48	/* Interrupt Disable Register */
+#define AT91_SSC_IMR		0x4c	/* Interrupt Mask Register */
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91_st.h b/include/asm-arm/arch-at91/at91_st.h
new file mode 100644
index 0000000..30446e2e
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91_st.h
@@ -0,0 +1,49 @@
+/*
+ * include/asm-arm/arch-at91/at91_st.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * System Timer (ST) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_ST_H
+#define AT91_ST_H
+
+#define	AT91_ST_CR		(AT91_ST + 0x00)	/* Control Register */
+#define 	AT91_ST_WDRST		(1 << 0)		/* Watchdog Timer Restart */
+
+#define	AT91_ST_PIMR		(AT91_ST + 0x04)	/* Period Interval Mode Register */
+#define		AT91_ST_PIV		(0xffff <<  0)		/* Period Interval Value */
+
+#define	AT91_ST_WDMR		(AT91_ST + 0x08)	/* Watchdog Mode Register */
+#define		AT91_ST_WDV		(0xffff <<  0)		/* Watchdog Counter Value */
+#define		AT91_ST_RSTEN		(1	<< 16)		/* Reset Enable */
+#define		AT91_ST_EXTEN		(1	<< 17)		/* External Signal Assertion Enable */
+
+#define	AT91_ST_RTMR		(AT91_ST + 0x0c)	/* Real-time Mode Register */
+#define		AT91_ST_RTPRES		(0xffff <<  0)		/* Real-time Prescalar Value */
+
+#define	AT91_ST_SR		(AT91_ST + 0x10)	/* Status Register */
+#define		AT91_ST_PITS		(1 << 0)		/* Period Interval Timer Status */
+#define		AT91_ST_WDOVF		(1 << 1) 		/* Watchdog Overflow */
+#define		AT91_ST_RTTINC		(1 << 2) 		/* Real-time Timer Increment */
+#define		AT91_ST_ALMS		(1 << 3) 		/* Alarm Status */
+
+#define	AT91_ST_IER		(AT91_ST + 0x14)	/* Interrupt Enable Register */
+#define	AT91_ST_IDR		(AT91_ST + 0x18)	/* Interrupt Disable Register */
+#define	AT91_ST_IMR		(AT91_ST + 0x1c)	/* Interrupt Mask Register */
+
+#define	AT91_ST_RTAR		(AT91_ST + 0x20)	/* Real-time Alarm Register */
+#define		AT91_ST_ALMV		(0xfffff << 0)		/* Alarm Value */
+
+#define	AT91_ST_CRTR		(AT91_ST + 0x24)	/* Current Real-time Register */
+#define		AT91_ST_CRTV		(0xfffff << 0)		/* Current Real-Time Value */
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91_tc.h b/include/asm-arm/arch-at91/at91_tc.h
new file mode 100644
index 0000000..b85d3fa
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91_tc.h
@@ -0,0 +1,146 @@
+/*
+ * include/asm-arm/arch-at91/at91_tc.h
+ *
+ * Copyright (C) SAN People
+ *
+ * Timer/Counter Unit (TC) registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_TC_H
+#define AT91_TC_H
+
+#define AT91_TC_BCR		0xc0		/* TC Block Control Register */
+#define		AT91_TC_SYNC		(1 << 0)	/* Synchro Command */
+
+#define AT91_TC_BMR		0xc4		/* TC Block Mode Register */
+#define		AT91_TC_TC0XC0S		(3 << 0)	/* External Clock Signal 0 Selection */
+#define			AT91_TC_TC0XC0S_TCLK0		(0 << 0)
+#define			AT91_TC_TC0XC0S_NONE		(1 << 0)
+#define			AT91_TC_TC0XC0S_TIOA1		(2 << 0)
+#define			AT91_TC_TC0XC0S_TIOA2		(3 << 0)
+#define		AT91_TC_TC1XC1S		(3 << 2)	/* External Clock Signal 1 Selection */
+#define			AT91_TC_TC1XC1S_TCLK1		(0 << 2)
+#define			AT91_TC_TC1XC1S_NONE		(1 << 2)
+#define			AT91_TC_TC1XC1S_TIOA0		(2 << 2)
+#define			AT91_TC_TC1XC1S_TIOA2		(3 << 2)
+#define		AT91_TC_TC2XC2S		(3 << 4)	/* External Clock Signal 2 Selection */
+#define			AT91_TC_TC2XC2S_TCLK2		(0 << 4)
+#define			AT91_TC_TC2XC2S_NONE		(1 << 4)
+#define			AT91_TC_TC2XC2S_TIOA0		(2 << 4)
+#define			AT91_TC_TC2XC2S_TIOA1		(3 << 4)
+
+
+#define AT91_TC_CCR		0x00		/* Channel Control Register */
+#define		AT91_TC_CLKEN		(1 << 0)	/* Counter Clock Enable Command */
+#define		AT91_TC_CLKDIS		(1 << 1)	/* Counter CLock Disable Command */
+#define		AT91_TC_SWTRG		(1 << 2)	/* Software Trigger Command */
+
+#define AT91_TC_CMR		0x04		/* Channel Mode Register */
+#define		AT91_TC_TCCLKS		(7 << 0)	/* Capture/Waveform Mode: Clock Selection */
+#define			AT91_TC_TIMER_CLOCK1		(0 << 0)
+#define			AT91_TC_TIMER_CLOCK2		(1 << 0)
+#define			AT91_TC_TIMER_CLOCK3		(2 << 0)
+#define			AT91_TC_TIMER_CLOCK4		(3 << 0)
+#define			AT91_TC_TIMER_CLOCK5		(4 << 0)
+#define			AT91_TC_XC0			(5 << 0)
+#define			AT91_TC_XC1			(6 << 0)
+#define			AT91_TC_XC2			(7 << 0)
+#define		AT91_TC_CLKI		(1 << 3)	/* Capture/Waveform Mode: Clock Invert */
+#define		AT91_TC_BURST		(3 << 4)	/* Capture/Waveform Mode: Burst Signal Selection */
+#define		AT91_TC_LDBSTOP		(1 << 6)	/* Capture Mode: Counter Clock Stopped with TB Loading */
+#define		AT91_TC_LDBDIS		(1 << 7)	/* Capture Mode: Counter Clock Disable with RB Loading */
+#define		AT91_TC_ETRGEDG		(3 << 8)	/* Capture Mode: External Trigger Edge Selection */
+#define		AT91_TC_ABETRG		(1 << 10)	/* Capture Mode: TIOA or TIOB External Trigger Selection */
+#define		AT91_TC_CPCTRG		(1 << 14)	/* Capture Mode: RC Compare Trigger Enable */
+#define		AT91_TC_WAVE		(1 << 15)	/* Capture/Waveform mode */
+#define		AT91_TC_LDRA		(3 << 16)	/* Capture Mode: RA Loading Selection */
+#define		AT91_TC_LDRB		(3 << 18)	/* Capture Mode: RB Loading Selection */
+
+#define		AT91_TC_CPCSTOP		(1 <<  6)	/* Waveform Mode: Counter Clock Stopped with RC Compare */
+#define		AT91_TC_CPCDIS		(1 <<  7)	/* Waveform Mode: Counter Clock Disable with RC Compare */
+#define		AT91_TC_EEVTEDG		(3 <<  8)	/* Waveform Mode: External Event Edge Selection */
+#define			AT91_TC_EEVTEDG_NONE		(0 << 8)
+#define			AT91_TC_EEVTEDG_RISING		(1 << 8)
+#define			AT91_TC_EEVTEDG_FALLING		(2 << 8)
+#define			AT91_TC_EEVTEDG_BOTH		(3 << 8)
+#define		AT91_TC_EEVT		(3 << 10)	/* Waveform Mode: External Event Selection */
+#define			AT91_TC_EEVT_TIOB		(0 << 10)
+#define			AT91_TC_EEVT_XC0		(1 << 10)
+#define			AT91_TC_EEVT_XC1		(2 << 10)
+#define			AT91_TC_EEVT_XC2		(3 << 10)
+#define		AT91_TC_ENETRG		(1 << 12)	/* Waveform Mode: External Event Trigger Enable */
+#define		AT91_TC_WAVESEL		(3 << 13)	/* Waveform Mode: Waveform Selection */
+#define			AT91_TC_WAVESEL_UP		(0 << 13)
+#define			AT91_TC_WAVESEL_UP_AUTO		(2 << 13)
+#define			AT91_TC_WAVESEL_UPDOWN		(1 << 13)
+#define			AT91_TC_WAVESEL_UPDOWN_AUTO	(3 << 13)
+#define		AT91_TC_ACPA		(3 << 16)	/* Waveform Mode: RA Compare Effect on TIOA */
+#define			AT91_TC_ACPA_NONE		(0 << 16)
+#define			AT91_TC_ACPA_SET		(1 << 16)
+#define			AT91_TC_ACPA_CLEAR		(2 << 16)
+#define			AT91_TC_ACPA_TOGGLE		(3 << 16)
+#define		AT91_TC_ACPC		(3 << 18)	/* Waveform Mode: RC Compre Effect on TIOA */
+#define			AT91_TC_ACPC_NONE		(0 << 18)
+#define			AT91_TC_ACPC_SET		(1 << 18)
+#define			AT91_TC_ACPC_CLEAR		(2 << 18)
+#define			AT91_TC_ACPC_TOGGLE		(3 << 18)
+#define		AT91_TC_AEEVT		(3 << 20)	/* Waveform Mode: External Event Effect on TIOA */
+#define			AT91_TC_AEEVT_NONE		(0 << 20)
+#define			AT91_TC_AEEVT_SET		(1 << 20)
+#define			AT91_TC_AEEVT_CLEAR		(2 << 20)
+#define			AT91_TC_AEEVT_TOGGLE		(3 << 20)
+#define		AT91_TC_ASWTRG		(3 << 22)	/* Waveform Mode: Software Trigger Effect on TIOA */
+#define			AT91_TC_ASWTRG_NONE		(0 << 22)
+#define			AT91_TC_ASWTRG_SET		(1 << 22)
+#define			AT91_TC_ASWTRG_CLEAR		(2 << 22)
+#define			AT91_TC_ASWTRG_TOGGLE		(3 << 22)
+#define		AT91_TC_BCPB		(3 << 24)	/* Waveform Mode: RB Compare Effect on TIOB */
+#define			AT91_TC_BCPB_NONE		(0 << 24)
+#define			AT91_TC_BCPB_SET		(1 << 24)
+#define			AT91_TC_BCPB_CLEAR		(2 << 24)
+#define			AT91_TC_BCPB_TOGGLE		(3 << 24)
+#define		AT91_TC_BCPC		(3 << 26)	/* Waveform Mode: RC Compare Effect on TIOB */
+#define			AT91_TC_BCPC_NONE		(0 << 26)
+#define			AT91_TC_BCPC_SET		(1 << 26)
+#define			AT91_TC_BCPC_CLEAR		(2 << 26)
+#define			AT91_TC_BCPC_TOGGLE		(3 << 26)
+#define		AT91_TC_BEEVT		(3 << 28)	/* Waveform Mode: External Event Effect on TIOB */
+#define			AT91_TC_BEEVT_NONE		(0 << 28)
+#define			AT91_TC_BEEVT_SET		(1 << 28)
+#define			AT91_TC_BEEVT_CLEAR		(2 << 28)
+#define			AT91_TC_BEEVT_TOGGLE		(3 << 28)
+#define		AT91_TC_BSWTRG		(3 << 30)	/* Waveform Mode: Software Trigger Effect on TIOB */
+#define			AT91_TC_BSWTRG_NONE		(0 << 30)
+#define			AT91_TC_BSWTRG_SET		(1 << 30)
+#define			AT91_TC_BSWTRG_CLEAR		(2 << 30)
+#define			AT91_TC_BSWTRG_TOGGLE		(3 << 30)
+
+#define AT91_TC_CV		0x10		/* Counter Value */
+#define AT91_TC_RA		0x14		/* Register A */
+#define AT91_TC_RB		0x18		/* Register B */
+#define AT91_TC_RC		0x1c		/* Register C */
+
+#define AT91_TC_SR		0x20		/* Status Register */
+#define		AT91_TC_COVFS		(1 <<  0)	/* Counter Overflow Status */
+#define		AT91_TC_LOVRS		(1 <<  1)	/* Load Overrun Status */
+#define		AT91_TC_CPAS		(1 <<  2)	/* RA Compare Status */
+#define		AT91_TC_CPBS		(1 <<  3)	/* RB Compare Status */
+#define		AT91_TC_CPCS		(1 <<  4)	/* RC Compare Status */
+#define		AT91_TC_LDRAS		(1 <<  5)	/* RA Loading Status */
+#define		AT91_TC_LDRBS		(1 <<  6)	/* RB Loading Status */
+#define		AT91_TC_ETRGS		(1 <<  7)	/* External Trigger Status */
+#define		AT91_TC_CLKSTA		(1 << 16)	/* Clock Enabling Status */
+#define		AT91_TC_MTIOA		(1 << 17)	/* TIOA Mirror */
+#define		AT91_TC_MTIOB		(1 << 18)	/* TIOB Mirror */
+
+#define AT91_TC_IER		0x24		/* Interrupt Enable Register */
+#define AT91_TC_IDR		0x28		/* Interrupt Disable Register */
+#define AT91_TC_IMR		0x2c		/* Interrupt Mask Register */
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91_twi.h b/include/asm-arm/arch-at91/at91_twi.h
new file mode 100644
index 0000000..ca9a907
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91_twi.h
@@ -0,0 +1,57 @@
+/*
+ * include/asm-arm/arch-at91/at91_twi.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Two-wire Interface (TWI) registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_TWI_H
+#define AT91_TWI_H
+
+#define	AT91_TWI_CR		0x00		/* Control Register */
+#define		AT91_TWI_START		(1 <<  0)	/* Send a Start Condition */
+#define		AT91_TWI_STOP		(1 <<  1)	/* Send a Stop Condition */
+#define		AT91_TWI_MSEN		(1 <<  2)	/* Master Transfer Enable */
+#define		AT91_TWI_MSDIS		(1 <<  3)	/* Master Transfer Disable */
+#define		AT91_TWI_SWRST		(1 <<  7)	/* Software Reset */
+
+#define	AT91_TWI_MMR		0x04		/* Master Mode Register */
+#define		AT91_TWI_IADRSZ		(3    <<  8)	/* Internal Device Address Size */
+#define			AT91_TWI_IADRSZ_NO		(0 << 8)
+#define			AT91_TWI_IADRSZ_1		(1 << 8)
+#define			AT91_TWI_IADRSZ_2		(2 << 8)
+#define			AT91_TWI_IADRSZ_3		(3 << 8)
+#define		AT91_TWI_MREAD		(1    << 12)	/* Master Read Direction */
+#define		AT91_TWI_DADR		(0x7f << 16)	/* Device Address */
+
+#define	AT91_TWI_IADR		0x0c		/* Internal Address Register */
+
+#define	AT91_TWI_CWGR		0x10		/* Clock Waveform Generator Register */
+#define		AT91_TWI_CLDIV		(0xff <<  0)	/* Clock Low Divisor */
+#define		AT91_TWI_CHDIV		(0xff <<  8)	/* Clock High Divisor */
+#define		AT91_TWI_CKDIV		(7    << 16)	/* Clock Divider */
+
+#define	AT91_TWI_SR		0x20		/* Status Register */
+#define		AT91_TWI_TXCOMP		(1 <<  0)	/* Transmission Complete */
+#define		AT91_TWI_RXRDY		(1 <<  1)	/* Receive Holding Register Ready */
+#define		AT91_TWI_TXRDY		(1 <<  2)	/* Transmit Holding Register Ready */
+#define		AT91_TWI_OVRE		(1 <<  6)	/* Overrun Error [AT91RM9200 only] */
+#define		AT91_TWI_UNRE		(1 <<  7)	/* Underrun Error [AT91RM9200 only] */
+#define		AT91_TWI_NACK		(1 <<  8)	/* Not Acknowledged */
+
+#define	AT91_TWI_IER		0x24		/* Interrupt Enable Register */
+#define	AT91_TWI_IDR		0x28		/* Interrupt Disable Register */
+#define	AT91_TWI_IMR		0x2c		/* Interrupt Mask Register */
+#define	AT91_TWI_RHR		0x30		/* Receive Holding Register */
+#define	AT91_TWI_THR		0x34		/* Transmit Holding Register */
+
+#endif
+
diff --git a/include/asm-arm/arch-at91/at91_wdt.h b/include/asm-arm/arch-at91/at91_wdt.h
new file mode 100644
index 0000000..7251a34
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91_wdt.h
@@ -0,0 +1,34 @@
+/*
+ * include/asm-arm/arch-at91/at91_wdt.h
+ *
+ * Watchdog Timer (WDT) - System peripherals regsters.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91_WDT_H
+#define AT91_WDT_H
+
+#define AT91_WDT_CR		(AT91_WDT + 0x00)	/* Watchdog Control Register */
+#define		AT91_WDT_WDRSTT		(1    << 0)		/* Restart */
+#define		AT91_WDT_KEY		(0xff << 24)		/* KEY Password */
+
+#define AT91_WDT_MR		(AT91_WDT + 0x04)	/* Watchdog Mode Register */
+#define		AT91_WDT_WDV		(0xfff << 0)		/* Counter Value */
+#define		AT91_WDT_WDFIEN		(1     << 12)		/* Fault Interrupt Enable */
+#define		AT91_WDT_WDRSTEN	(1     << 13)		/* Reset Processor */
+#define		AT91_WDT_WDRPROC	(1     << 14)		/* Timer Restart */
+#define		AT91_WDT_WDDIS		(1     << 15)		/* Watchdog Disable */
+#define		AT91_WDT_WDD		(0xfff << 16)		/* Delta Value */
+#define		AT91_WDT_WDDBGHLT	(1     << 28)		/* Debug Halt */
+#define		AT91_WDT_WDIDLEHLT	(1     << 29)		/* Idle Halt */
+
+#define AT91_WDT_SR		(AT91_WDT + 0x08)	/* Watchdog Status Register */
+#define		AT91_WDT_WDUNF		(1 << 0)		/* Watchdog Underflow */
+#define		AT91_WDT_WDERR		(1 << 1)		/* Watchdog Error */
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91rm9200.h b/include/asm-arm/arch-at91/at91rm9200.h
new file mode 100644
index 0000000..a12ac8a
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91rm9200.h
@@ -0,0 +1,291 @@
+/*
+ * include/asm-arm/arch-at91/at91rm9200.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Common definitions.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91RM9200_H
+#define AT91RM9200_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS		1	/* System Peripheral */
+#define AT91RM9200_ID_PIOA	2	/* Parallel IO Controller A */
+#define AT91RM9200_ID_PIOB	3	/* Parallel IO Controller B */
+#define AT91RM9200_ID_PIOC	4	/* Parallel IO Controller C */
+#define AT91RM9200_ID_PIOD	5	/* Parallel IO Controller D */
+#define AT91RM9200_ID_US0	6	/* USART 0 */
+#define AT91RM9200_ID_US1	7	/* USART 1 */
+#define AT91RM9200_ID_US2	8	/* USART 2 */
+#define AT91RM9200_ID_US3	9	/* USART 3 */
+#define AT91RM9200_ID_MCI	10	/* Multimedia Card Interface */
+#define AT91RM9200_ID_UDP	11	/* USB Device Port */
+#define AT91RM9200_ID_TWI	12	/* Two-Wire Interface */
+#define AT91RM9200_ID_SPI	13	/* Serial Peripheral Interface */
+#define AT91RM9200_ID_SSC0	14	/* Serial Synchronous Controller 0 */
+#define AT91RM9200_ID_SSC1	15	/* Serial Synchronous Controller 1 */
+#define AT91RM9200_ID_SSC2	16	/* Serial Synchronous Controller 2 */
+#define AT91RM9200_ID_TC0	17	/* Timer Counter 0 */
+#define AT91RM9200_ID_TC1	18	/* Timer Counter 1 */
+#define AT91RM9200_ID_TC2	19	/* Timer Counter 2 */
+#define AT91RM9200_ID_TC3	20	/* Timer Counter 3 */
+#define AT91RM9200_ID_TC4	21	/* Timer Counter 4 */
+#define AT91RM9200_ID_TC5	22	/* Timer Counter 5 */
+#define AT91RM9200_ID_UHP	23	/* USB Host port */
+#define AT91RM9200_ID_EMAC	24	/* Ethernet MAC */
+#define AT91RM9200_ID_IRQ0	25	/* Advanced Interrupt Controller (IRQ0) */
+#define AT91RM9200_ID_IRQ1	26	/* Advanced Interrupt Controller (IRQ1) */
+#define AT91RM9200_ID_IRQ2	27	/* Advanced Interrupt Controller (IRQ2) */
+#define AT91RM9200_ID_IRQ3	28	/* Advanced Interrupt Controller (IRQ3) */
+#define AT91RM9200_ID_IRQ4	29	/* Advanced Interrupt Controller (IRQ4) */
+#define AT91RM9200_ID_IRQ5	30	/* Advanced Interrupt Controller (IRQ5) */
+#define AT91RM9200_ID_IRQ6	31	/* Advanced Interrupt Controller (IRQ6) */
+
+
+/*
+ * Peripheral physical base addresses.
+ */
+#define AT91RM9200_BASE_TCB0	0xfffa0000
+#define AT91RM9200_BASE_TC0	0xfffa0000
+#define AT91RM9200_BASE_TC1	0xfffa0040
+#define AT91RM9200_BASE_TC2	0xfffa0080
+#define AT91RM9200_BASE_TCB1	0xfffa4000
+#define AT91RM9200_BASE_TC3	0xfffa4000
+#define AT91RM9200_BASE_TC4	0xfffa4040
+#define AT91RM9200_BASE_TC5	0xfffa4080
+#define AT91RM9200_BASE_UDP	0xfffb0000
+#define AT91RM9200_BASE_MCI	0xfffb4000
+#define AT91RM9200_BASE_TWI	0xfffb8000
+#define AT91RM9200_BASE_EMAC	0xfffbc000
+#define AT91RM9200_BASE_US0	0xfffc0000
+#define AT91RM9200_BASE_US1	0xfffc4000
+#define AT91RM9200_BASE_US2	0xfffc8000
+#define AT91RM9200_BASE_US3	0xfffcc000
+#define AT91RM9200_BASE_SSC0	0xfffd0000
+#define AT91RM9200_BASE_SSC1	0xfffd4000
+#define AT91RM9200_BASE_SSC2	0xfffd8000
+#define AT91RM9200_BASE_SPI	0xfffe0000
+#define AT91_BASE_SYS		0xfffff000
+
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)	/* Advanced Interrupt Controller */
+#define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)	/* Debug Unit */
+#define AT91_PIOA	(0xfffff400 - AT91_BASE_SYS)	/* PIO Controller A */
+#define AT91_PIOB	(0xfffff600 - AT91_BASE_SYS)	/* PIO Controller B */
+#define AT91_PIOC	(0xfffff800 - AT91_BASE_SYS)	/* PIO Controller C */
+#define AT91_PIOD	(0xfffffa00 - AT91_BASE_SYS)	/* PIO Controller D */
+#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)	/* Power Management Controller */
+#define AT91_ST		(0xfffffd00 - AT91_BASE_SYS)	/* System Timer */
+#define AT91_RTC	(0xfffffe00 - AT91_BASE_SYS)	/* Real-Time Clock */
+#define AT91_MC		(0xffffff00 - AT91_BASE_SYS)	/* Memory Controllers */
+
+#define AT91_MATRIX	0	/* not supported */
+
+/*
+ * Internal Memory.
+ */
+#define AT91RM9200_ROM_BASE	0x00100000	/* Internal ROM base address */
+#define AT91RM9200_ROM_SIZE	SZ_128K		/* Internal ROM size (128Kb) */
+
+#define AT91RM9200_SRAM_BASE	0x00200000	/* Internal SRAM base address */
+#define AT91RM9200_SRAM_SIZE	SZ_16K		/* Internal SRAM size (16Kb) */
+
+#define AT91RM9200_UHP_BASE	0x00300000	/* USB Host controller */
+
+
+#if 0
+/*
+ * PIO pin definitions (peripheral A/B multiplexing).
+ */
+#define AT91_PA0_MISO		(1 <<  0)	/* A: SPI Master-In Slave-Out */
+#define AT91_PA0_PCK3		(1 <<  0)	/* B: PMC Programmable Clock Output 3 */
+#define AT91_PA1_MOSI		(1 <<  1)	/* A: SPI Master-Out Slave-In */
+#define AT91_PA1_PCK0		(1 <<  1)	/* B: PMC Programmable Clock Output 0 */
+#define AT91_PA2_SPCK		(1 <<  2)	/* A: SPI Serial Clock */
+#define AT91_PA2_IRQ4		(1 <<  2)	/* B: External Interrupt 4 */
+#define AT91_PA3_NPCS0		(1 <<  3)	/* A: SPI Peripheral Chip Select 0 */
+#define AT91_PA3_IRQ5		(1 <<  3)	/* B: External Interrupt 5 */
+#define AT91_PA4_NPCS1		(1 <<  4)	/* A: SPI Peripheral Chip Select 1 */
+#define AT91_PA4_PCK1		(1 <<  4)	/* B: PMC Programmable Clock Output 1 */
+#define AT91_PA5_NPCS2		(1 <<  5)	/* A: SPI Peripheral Chip Select 2 */
+#define AT91_PA5_TXD3		(1 <<  5)	/* B: USART Transmit Data 3 */
+#define AT91_PA6_NPCS3		(1 <<  6)	/* A: SPI Peripheral Chip Select 3 */
+#define AT91_PA6_RXD3		(1 <<  6)	/* B: USART Receive Data 3 */
+#define AT91_PA7_ETXCK_EREFCK	(1 <<  7)	/* A: Ethernet Reference Clock / Transmit Clock */
+#define AT91_PA7_PCK2		(1 <<  7)	/* B: PMC Programmable Clock Output 2 */
+#define AT91_PA8_ETXEN		(1 <<  8)	/* A: Ethernet Transmit Enable */
+#define AT91_PA8_MCCDB		(1 <<  8)	/* B: MMC Multimedia Card B Command */
+#define AT91_PA9_ETX0		(1 <<  9)	/* A: Ethernet Transmit Data 0 */
+#define AT91_PA9_MCDB0		(1 <<  9)	/* B: MMC Multimedia Card B Data 0 */
+#define AT91_PA10_ETX1		(1 << 10)	/* A: Ethernet Transmit Data 1 */
+#define AT91_PA10_MCDB1		(1 << 10)	/* B: MMC Multimedia Card B Data 1 */
+#define AT91_PA11_ECRS_ECRSDV	(1 << 11)	/* A: Ethernet Carrier Sense / Data Valid */
+#define AT91_PA11_MCDB2		(1 << 11)	/* B: MMC Multimedia Card B Data 2 */
+#define AT91_PA12_ERX0		(1 << 12)	/* A: Ethernet Receive Data 0 */
+#define AT91_PA12_MCDB3		(1 << 12)	/* B: MMC Multimedia Card B Data 3 */
+#define AT91_PA13_ERX1		(1 << 13)	/* A: Ethernet Receive Data 1 */
+#define AT91_PA13_TCLK0		(1 << 13)	/* B: TC External Clock Input 0 */
+#define AT91_PA14_ERXER		(1 << 14)	/* A: Ethernet Receive Error */
+#define AT91_PA14_TCLK1		(1 << 14)	/* B: TC External Clock Input 1 */
+#define AT91_PA15_EMDC		(1 << 15)	/* A: Ethernet Management Data Clock */
+#define AT91_PA15_TCLK2		(1 << 15)	/* B: TC External Clock Input 2 */
+#define AT91_PA16_EMDIO		(1 << 16)	/* A: Ethernet Management Data I/O */
+#define AT91_PA16_IRQ6		(1 << 16)	/* B: External Interrupt 6 */
+#define AT91_PA17_TXD0		(1 << 17)	/* A: USART Transmit Data 0 */
+#define AT91_PA17_TIOA0		(1 << 17)	/* B: TC I/O Line A 0 */
+#define AT91_PA18_RXD0		(1 << 18)	/* A: USART Receive Data 0 */
+#define AT91_PA18_TIOB0		(1 << 18)	/* B: TC I/O Line B 0 */
+#define AT91_PA19_SCK0		(1 << 19)	/* A: USART Serial Clock 0 */
+#define AT91_PA19_TIOA1		(1 << 19)	/* B: TC I/O Line A 1 */
+#define AT91_PA20_CTS0		(1 << 20)	/* A: USART Clear To Send 0 */
+#define AT91_PA20_TIOB1		(1 << 20)	/* B: TC I/O Line B 1 */
+#define AT91_PA21_RTS0		(1 << 21)	/* A: USART Ready To Send 0 */
+#define AT91_PA21_TIOA2		(1 << 21)	/* B: TC I/O Line A 2 */
+#define AT91_PA22_RXD2		(1 << 22)	/* A: USART Receive Data 2 */
+#define AT91_PA22_TIOB2		(1 << 22)	/* B: TC I/O Line B 2 */
+#define AT91_PA23_TXD2		(1 << 23)	/* A: USART Transmit Data 2 */
+#define AT91_PA23_IRQ3		(1 << 23)	/* B: External Interrupt 3 */
+#define AT91_PA24_SCK2		(1 << 24)	/* A: USART Serial Clock 2 */
+#define AT91_PA24_PCK1		(1 << 24)	/* B: PMC Programmable Clock Output 1 */
+#define AT91_PA25_TWD		(1 << 25)	/* A: TWI Two-wire Serial Data */
+#define AT91_PA25_IRQ2		(1 << 25)	/* B: External Interrupt 2 */
+#define AT91_PA26_TWCK		(1 << 26)	/* A: TWI Two-wire Serial Clock */
+#define AT91_PA26_IRQ1		(1 << 26)	/* B: External Interrupt 1 */
+#define AT91_PA27_MCCK		(1 << 27)	/* A: MMC Multimedia Card Clock */
+#define AT91_PA27_TCLK3		(1 << 27)	/* B: TC External Clock Input 3 */
+#define AT91_PA28_MCCDA		(1 << 28)	/* A: MMC Multimedia Card A Command */
+#define AT91_PA28_TCLK4		(1 << 28)	/* B: TC External Clock Input 4 */
+#define AT91_PA29_MCDA0		(1 << 29)	/* A: MMC Multimedia Card A Data 0 */
+#define AT91_PA29_TCLK5		(1 << 29)	/* B: TC External Clock Input 5 */
+#define AT91_PA30_DRXD		(1 << 30)	/* A: DBGU Receive Data */
+#define AT91_PA30_CTS2		(1 << 30)	/* B: USART Clear To Send 2 */
+#define AT91_PA31_DTXD		(1 << 31)	/* A: DBGU Transmit Data */
+#define AT91_PA31_RTS2		(1 << 31)	/* B: USART Ready To Send 2 */
+
+#define AT91_PB0_TF0		(1 <<  0)	/* A: SSC Transmit Frame Sync 0 */
+#define AT91_PB0_RTS3		(1 <<  0)	/* B: USART Ready To Send 3 */
+#define AT91_PB1_TK0		(1 <<  1)	/* A: SSC Transmit Clock 0 */
+#define AT91_PB1_CTS3		(1 <<  1)	/* B: USART Clear To Send 3 */
+#define AT91_PB2_TD0		(1 <<  2)	/* A: SSC Transmit Data 0 */
+#define AT91_PB2_SCK3		(1 <<  2)	/* B: USART Serial Clock 3 */
+#define AT91_PB3_RD0		(1 <<  3)	/* A: SSC Receive Data 0 */
+#define AT91_PB3_MCDA1		(1 <<  3)	/* B: MMC Multimedia Card A Data 1 */
+#define AT91_PB4_RK0		(1 <<  4)	/* A: SSC Receive Clock 0 */
+#define AT91_PB4_MCDA2		(1 <<  4)	/* B: MMC Multimedia Card A Data 2 */
+#define AT91_PB5_RF0		(1 <<  5)	/* A: SSC Receive Frame Sync 0 */
+#define AT91_PB5_MCDA3		(1 <<  5)	/* B: MMC Multimedia Card A Data 3 */
+#define AT91_PB6_TF1		(1 <<  6)	/* A: SSC Transmit Frame Sync 1 */
+#define AT91_PB6_TIOA3		(1 <<  6)	/* B: TC I/O Line A 3 */
+#define AT91_PB7_TK1		(1 <<  7)	/* A: SSC Transmit Clock 1 */
+#define AT91_PB7_TIOB3		(1 <<  7)	/* B: TC I/O Line B 3 */
+#define AT91_PB8_TD1		(1 <<  8)	/* A: SSC Transmit Data 1 */
+#define AT91_PB8_TIOA4		(1 <<  8)	/* B: TC I/O Line A 4 */
+#define AT91_PB9_RD1		(1 <<  9)	/* A: SSC Receive Data 1 */
+#define AT91_PB9_TIOB4		(1 <<  9)	/* B: TC I/O Line B 4 */
+#define AT91_PB10_RK1		(1 << 10)	/* A: SSC Receive Clock 1 */
+#define AT91_PB10_TIOA5		(1 << 10)	/* B: TC I/O Line A 5 */
+#define AT91_PB11_RF1		(1 << 11)	/* A: SSC Receive Frame Sync 1 */
+#define AT91_PB11_TIOB5		(1 << 11)	/* B: TC I/O Line B 5 */
+#define AT91_PB12_TF2		(1 << 12)	/* A: SSC Transmit Frame Sync 2 */
+#define AT91_PB12_ETX2		(1 << 12)	/* B: Ethernet Transmit Data 2 */
+#define AT91_PB13_TK2		(1 << 13)	/* A: SSC Transmit Clock 3 */
+#define AT91_PB13_ETX3		(1 << 13)	/* B: Ethernet Transmit Data 3 */
+#define AT91_PB14_TD2		(1 << 14)	/* A: SSC Transmit Data 2 */
+#define AT91_PB14_ETXER		(1 << 14)	/* B: Ethernet Transmit Coding Error */
+#define AT91_PB15_RD2		(1 << 15)	/* A: SSC Receive Data 2 */
+#define AT91_PB15_ERX2		(1 << 15)	/* B: Ethernet Receive Data 2 */
+#define AT91_PB16_RK2		(1 << 16)	/* A: SSC Receive Clock 2 */
+#define AT91_PB16_ERX3		(1 << 16)	/* B: Ethernet Receive Data 3 */
+#define AT91_PB17_RF2		(1 << 17)	/* A: SSC Receive Frame Sync 2 */
+#define AT91_PB17_ERXDV		(1 << 17)	/* B: Ethernet Receive Data Valid */
+#define AT91_PB18_RI1		(1 << 18)	/* A: USART Ring Indicator 1 */
+#define AT91_PB18_ECOL		(1 << 18)	/* B: Ethernet Collision Detected */
+#define AT91_PB19_DTR1		(1 << 19)	/* A: USART Data Terminal Ready 1 */
+#define AT91_PB19_ERXCK		(1 << 19)	/* B: Ethernet Receive Clock */
+#define AT91_PB20_TXD1		(1 << 20)	/* A: USART Transmit Data 1 */
+#define AT91_PB21_RXD1		(1 << 21)	/* A: USART Receive Data 1 */
+#define AT91_PB22_SCK1		(1 << 22)	/* A: USART Serial Clock 1 */
+#define AT91_PB23_DCD1		(1 << 23)	/* A: USART Data Carrier Detect 1 */
+#define AT91_PB24_CTS1		(1 << 24)	/* A: USART Clear To Send 1 */
+#define AT91_PB25_DSR1		(1 << 25)	/* A: USART Data Set Ready 1 */
+#define AT91_PB25_EF100		(1 << 25)	/* B: Ethernet Force 100 Mbit */
+#define AT91_PB26_RTS1		(1 << 26)	/* A: USART Ready To Send 1 */
+#define AT91_PB27_PCK0		(1 << 27)	/* B: PMC Programmable Clock Output 0 */
+#define AT91_PB28_FIQ		(1 << 28)	/* A: Fast Interrupt */
+#define AT91_PB29_IRQ0		(1 << 29)	/* A: External Interrupt 0 */
+
+#define AT91_PC0_BFCK		(1 <<  0)	/* A: Burst Flash Clock */
+#define AT91_PC1_BFRDY_SMOE	(1 <<  1)	/* A: Burst Flash Ready / SmartMedia Output Enable */
+#define AT91_PC2_BFAVD		(1 <<  2)	/* A: Burst Flash Address Valid */
+#define AT91_PC3_BFBAA_SMWE	(1 <<  3)	/* A: Burst Flash Address Advance / SmartMedia Write Enable */
+#define AT91_PC4_BFOE		(1 <<  4)	/* A: Burst Flash Output Enable */
+#define AT91_PC5_BFWE		(1 <<  5)	/* A: Burst Flash Write Enable */
+#define AT91_PC6_NWAIT		(1 <<  6)	/* A: SMC Wait Signal */
+#define AT91_PC7_A23		(1 <<  7)	/* A: Address Bus 23 */
+#define AT91_PC8_A24		(1 <<  8)	/* A: Address Bus 24 */
+#define AT91_PC9_A25_CFRNW	(1 <<  9)	/* A: Address Bus 25 / Compact Flash Read Not Write */
+#define AT91_PC10_NCS4_CFCS	(1 << 10)	/* A: SMC Chip Select 4 / Compact Flash Chip Select */
+#define AT91_PC11_NCS5_CFCE1	(1 << 11)	/* A: SMC Chip Select 5 / Compact Flash Chip Enable 1 */
+#define AT91_PC12_NCS6_CFCE2	(1 << 12)	/* A: SMC Chip Select 6 / Compact Flash Chip Enable 2 */
+#define AT91_PC13_NCS7		(1 << 13)	/* A: Chip Select 7 */
+
+#define AT91_PD0_ETX0		(1 <<  0)	/* A: Ethernet Transmit Data 0 */
+#define AT91_PD1_ETX1		(1 <<  1)	/* A: Ethernet Transmit Data 1 */
+#define AT91_PD2_ETX2		(1 <<  2)	/* A: Ethernet Transmit Data 2 */
+#define AT91_PD3_ETX3		(1 <<  3)	/* A: Ethernet Transmit Data 3 */
+#define AT91_PD4_ETXEN		(1 <<  4)	/* A: Ethernet Transmit Enable */
+#define AT91_PD5_ETXER		(1 <<  5)	/* A: Ethernet Transmit Coding Error */
+#define AT91_PD6_DTXD		(1 <<  6)	/* A: DBGU Transmit Data */
+#define AT91_PD7_PCK0		(1 <<  7)	/* A: PMC Programmable Clock Output 0 */
+#define AT91_PD7_TSYNC		(1 <<  7)	/* B: ETM Trace Synchronization Signal */
+#define AT91_PD8_PCK1		(1 <<  8)	/* A: PMC Programmable Clock Output 1 */
+#define AT91_PD8_TCLK		(1 <<  8)	/* B: ETM Trace Clock */
+#define AT91_PD9_PCK2		(1 <<  9)	/* A: PMC Programmable Clock Output 2 */
+#define AT91_PD9_TPS0		(1 <<  9)	/* B: ETM Trace ARM Pipeline Status 0 */
+#define AT91_PD10_PCK3		(1 << 10)	/* A: PMC Programmable Clock Output 3 */
+#define AT91_PD10_TPS1		(1 << 10)	/* B: ETM Trace ARM Pipeline Status 1 */
+#define AT91_PD11_TPS2		(1 << 11)	/* B: ETM Trace ARM Pipeline Status 2 */
+#define AT91_PD12_TPK0		(1 << 12)	/* B: ETM Trace Packet Port 0 */
+#define AT91_PD13_TPK1		(1 << 13)	/* B: ETM Trace Packet Port 1 */
+#define AT91_PD14_TPK2		(1 << 14)	/* B: ETM Trace Packet Port 2 */
+#define AT91_PD15_TD0		(1 << 15)	/* A: SSC Transmit Data 0 */
+#define AT91_PD15_TPK3		(1 << 15)	/* B: ETM Trace Packet Port 3 */
+#define AT91_PD16_TD1		(1 << 16)	/* A: SSC Transmit Data 1 */
+#define AT91_PD16_TPK4		(1 << 16)	/* B: ETM Trace Packet Port 4 */
+#define AT91_PD17_TD2		(1 << 17)	/* A: SSC Transmit Data 2 */
+#define AT91_PD17_TPK5		(1 << 17)	/* B: ETM Trace Packet Port 5 */
+#define AT91_PD18_NPCS1		(1 << 18)	/* A: SPI Peripheral Chip Select 1 */
+#define AT91_PD18_TPK6		(1 << 18)	/* B: ETM Trace Packet Port 6 */
+#define AT91_PD19_NPCS2		(1 << 19)	/* A: SPI Peripheral Chip Select 2 */
+#define AT91_PD19_TPK7		(1 << 19)	/* B: ETM Trace Packet Port 7 */
+#define AT91_PD20_NPCS3		(1 << 20)	/* A: SPI Peripheral Chip Select 3 */
+#define AT91_PD20_TPK8		(1 << 20)	/* B: ETM Trace Packet Port 8 */
+#define AT91_PD21_RTS0		(1 << 21)	/* A: USART Ready To Send 0 */
+#define AT91_PD21_TPK9		(1 << 21)	/* B: ETM Trace Packet Port 9 */
+#define AT91_PD22_RTS1		(1 << 22)	/* A: USART Ready To Send 1 */
+#define AT91_PD22_TPK10		(1 << 22)	/* B: ETM Trace Packet Port 10 */
+#define AT91_PD23_RTS2		(1 << 23)	/* A: USART Ready To Send 2 */
+#define AT91_PD23_TPK11		(1 << 23)	/* B: ETM Trace Packet Port 11 */
+#define AT91_PD24_RTS3		(1 << 24)	/* A: USART Ready To Send 3 */
+#define AT91_PD24_TPK12		(1 << 24)	/* B: ETM Trace Packet Port 12 */
+#define AT91_PD25_DTR1		(1 << 25)	/* A: USART Data Terminal Ready 1 */
+#define AT91_PD25_TPK13		(1 << 25)	/* B: ETM Trace Packet Port 13 */
+#define AT91_PD26_TPK14		(1 << 26)	/* B: ETM Trace Packet Port 14 */
+#define AT91_PD27_TPK15		(1 << 27)	/* B: ETM Trace Packet Port 15 */
+#endif
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91rm9200_emac.h b/include/asm-arm/arch-at91/at91rm9200_emac.h
new file mode 100644
index 0000000..0c417af
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91rm9200_emac.h
@@ -0,0 +1,138 @@
+/*
+ * include/asm-arm/arch-at91/at91rm9200_emac.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Ethernet MAC registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91RM9200_EMAC_H
+#define AT91RM9200_EMAC_H
+
+#define	AT91_EMAC_CTL		0x00	/* Control Register */
+#define		AT91_EMAC_LB		(1 <<  0)	/* Loopback */
+#define		AT91_EMAC_LBL		(1 <<  1)	/* Loopback Local */
+#define		AT91_EMAC_RE		(1 <<  2)	/* Receive Enable */
+#define		AT91_EMAC_TE		(1 <<  3)	/* Transmit Enable */
+#define		AT91_EMAC_MPE		(1 <<  4)	/* Management Port Enable */
+#define		AT91_EMAC_CSR		(1 <<  5)	/* Clear Statistics Registers */
+#define		AT91_EMAC_INCSTAT	(1 <<  6)	/* Increment Statistics Registers */
+#define		AT91_EMAC_WES		(1 <<  7)	/* Write Enable for Statistics Registers */
+#define		AT91_EMAC_BP		(1 <<  8)	/* Back Pressure */
+
+#define	AT91_EMAC_CFG		0x04	/* Configuration Register */
+#define		AT91_EMAC_SPD		(1 <<  0)	/* Speed */
+#define		AT91_EMAC_FD		(1 <<  1)	/* Full Duplex */
+#define		AT91_EMAC_BR		(1 <<  2)	/* Bit Rate */
+#define		AT91_EMAC_CAF		(1 <<  4)	/* Copy All Frames */
+#define		AT91_EMAC_NBC		(1 <<  5)	/* No Broadcast */
+#define		AT91_EMAC_MTI		(1 <<  6)	/* Multicast Hash Enable */
+#define		AT91_EMAC_UNI		(1 <<  7)	/* Unicast Hash Enable */
+#define		AT91_EMAC_BIG		(1 <<  8)	/* Receive 1522 Bytes */
+#define		AT91_EMAC_EAE		(1 <<  9)	/* External Address Match Enable */
+#define		AT91_EMAC_CLK		(3 << 10)	/* MDC Clock Divisor */
+#define		AT91_EMAC_CLK_DIV8		(0 << 10)
+#define		AT91_EMAC_CLK_DIV16		(1 << 10)
+#define		AT91_EMAC_CLK_DIV32		(2 << 10)
+#define		AT91_EMAC_CLK_DIV64		(3 << 10)
+#define		AT91_EMAC_RTY		(1 << 12)	/* Retry Test */
+#define		AT91_EMAC_RMII		(1 << 13)	/* Reduce MII (RMII) */
+
+#define	AT91_EMAC_SR		0x08	/* Status Register */
+#define		AT91_EMAC_SR_LINK	(1 <<  0)	/* Link */
+#define		AT91_EMAC_SR_MDIO	(1 <<  1)	/* MDIO pin */
+#define		AT91_EMAC_SR_IDLE	(1 <<  2)	/* PHY idle */
+
+#define	AT91_EMAC_TAR		0x0c	/* Transmit Address Register */
+
+#define	AT91_EMAC_TCR		0x10	/* Transmit Control Register */
+#define		AT91_EMAC_LEN		(0x7ff << 0)	/* Transmit Frame Length */
+#define		AT91_EMAC_NCRC		(1     << 15)	/* No CRC */
+
+#define	AT91_EMAC_TSR		0x14	/* Transmit Status Register */
+#define		AT91_EMAC_TSR_OVR	(1 <<  0)	/* Transmit Buffer Overrun */
+#define		AT91_EMAC_TSR_COL	(1 <<  1)	/* Collision Occurred */
+#define		AT91_EMAC_TSR_RLE	(1 <<  2)	/* Retry Limit Exceeded */
+#define		AT91_EMAC_TSR_IDLE	(1 <<  3)	/* Transmitter Idle */
+#define		AT91_EMAC_TSR_BNQ	(1 <<  4)	/* Transmit Buffer not Queued */
+#define		AT91_EMAC_TSR_COMP	(1 <<  5)	/* Transmit Complete */
+#define		AT91_EMAC_TSR_UND	(1 <<  6)	/* Transmit Underrun */
+
+#define	AT91_EMAC_RBQP		0x18	/* Receive Buffer Queue Pointer */
+
+#define	AT91_EMAC_RSR		0x20	/* Receive Status Register */
+#define		AT91_EMAC_RSR_BNA	(1 <<  0)	/* Buffer Not Available */
+#define		AT91_EMAC_RSR_REC	(1 <<  1)	/* Frame Received */
+#define		AT91_EMAC_RSR_OVR	(1 <<  2)	/* RX Overrun */
+
+#define	AT91_EMAC_ISR		0x24	/* Interrupt Status Register */
+#define		AT91_EMAC_DONE		(1 <<  0)	/* Management Done */
+#define		AT91_EMAC_RCOM		(1 <<  1)	/* Receive Complete */
+#define		AT91_EMAC_RBNA		(1 <<  2)	/* Receive Buffer Not Available */
+#define		AT91_EMAC_TOVR		(1 <<  3)	/* Transmit Buffer Overrun */
+#define		AT91_EMAC_TUND		(1 <<  4)	/* Transmit Buffer Underrun */
+#define		AT91_EMAC_RTRY		(1 <<  5)	/* Retry Limit */
+#define		AT91_EMAC_TBRE		(1 <<  6)	/* Transmit Buffer Register Empty */
+#define		AT91_EMAC_TCOM		(1 <<  7)	/* Transmit Complete */
+#define		AT91_EMAC_TIDLE		(1 <<  8)	/* Transmit Idle */
+#define		AT91_EMAC_LINK		(1 <<  9)	/* Link */
+#define		AT91_EMAC_ROVR		(1 << 10)	/* RX Overrun */
+#define		AT91_EMAC_ABT		(1 << 11)	/* Abort */
+
+#define	AT91_EMAC_IER		0x28	/* Interrupt Enable Register */
+#define	AT91_EMAC_IDR		0x2c	/* Interrupt Disable Register */
+#define	AT91_EMAC_IMR		0x30	/* Interrupt Mask Register */
+
+#define	AT91_EMAC_MAN		0x34	/* PHY Maintenance Register */
+#define		AT91_EMAC_DATA		(0xffff << 0)	/* MDIO Data */
+#define		AT91_EMAC_REGA		(0x1f	<< 18)	/* MDIO Register */
+#define		AT91_EMAC_PHYA		(0x1f	<< 23)	/* MDIO PHY Address */
+#define		AT91_EMAC_RW		(3	<< 28)	/* Read/Write operation */
+#define			AT91_EMAC_RW_W		(1 << 28)
+#define			AT91_EMAC_RW_R		(2 << 28)
+#define		AT91_EMAC_MAN_802_3	0x40020000	/* IEEE 802.3 value */
+
+/*
+ * Statistics Registers.
+ */
+#define AT91_EMAC_FRA		0x40	/* Frames Transmitted OK */
+#define AT91_EMAC_SCOL		0x44	/* Single Collision Frame */
+#define AT91_EMAC_MCOL		0x48	/* Multiple Collision Frame */
+#define AT91_EMAC_OK		0x4c	/* Frames Received OK */
+#define AT91_EMAC_SEQE		0x50	/* Frame Check Sequence Error */
+#define AT91_EMAC_ALE		0x54	/* Alignmemt Error */
+#define AT91_EMAC_DTE		0x58	/* Deffered Transmission Frame */
+#define AT91_EMAC_LCOL		0x5c	/* Late Collision */
+#define AT91_EMAC_ECOL		0x60	/* Excessive Collision */
+#define AT91_EMAC_TUE		0x64	/* Transmit Underrun Error */
+#define AT91_EMAC_CSE		0x68	/* Carrier Sense Error */
+#define AT91_EMAC_DRFC		0x6c	/* Discard RX Frame */
+#define AT91_EMAC_ROV		0x70	/* Receive Overrun */
+#define AT91_EMAC_CDE		0x74	/* Code Error */
+#define AT91_EMAC_ELR		0x78	/* Excessive Length Error */
+#define AT91_EMAC_RJB		0x7c	/* Receive Jabber */
+#define AT91_EMAC_USF		0x80	/* Undersize Frame */
+#define AT91_EMAC_SQEE		0x84	/* SQE Test Error */
+
+/*
+ * Address Registers.
+ */
+#define AT91_EMAC_HSL		0x90	/* Hash Address Low [31:0] */
+#define AT91_EMAC_HSH		0x94	/* Hash Address High [63:32] */
+#define AT91_EMAC_SA1L		0x98	/* Specific Address 1 Low, bytes 0-3 */
+#define AT91_EMAC_SA1H		0x9c	/* Specific Address 1 High, bytes 4-5 */
+#define AT91_EMAC_SA2L		0xa0	/* Specific Address 2 Low, bytes 0-3 */
+#define AT91_EMAC_SA2H		0xa4	/* Specific Address 2 High, bytes 4-5 */
+#define AT91_EMAC_SA3L		0xa8	/* Specific Address 3 Low, bytes 0-3 */
+#define AT91_EMAC_SA3H		0xac	/* Specific Address 3 High, bytes 4-5 */
+#define AT91_EMAC_SA4L		0xb0	/* Specific Address 4 Low, bytes 0-3 */
+#define AT91_EMAC_SA4H		0xb4	/* Specific Address 4 High, bytes 4-5 */
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91rm9200_mc.h b/include/asm-arm/arch-at91/at91rm9200_mc.h
new file mode 100644
index 0000000..24d0129
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91rm9200_mc.h
@@ -0,0 +1,160 @@
+/*
+ * include/asm-arm/arch-at91/at91rm9200_mc.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Memory Controllers (MC, EBI, SMC, SDRAMC, BFC) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91RM9200_MC_H
+#define AT91RM9200_MC_H
+
+/* Memory Controller */
+#define AT91_MC_RCR		(AT91_MC + 0x00)	/* MC Remap Control Register */
+#define		AT91_MC_RCB		(1 <<  0)		/* Remap Command Bit */
+
+#define AT91_MC_ASR		(AT91_MC + 0x04)	/* MC Abort Status Register */
+#define		AT91_MC_UNADD		(1 <<  0)		/* Undefined Address Abort Status */
+#define		AT91_MC_MISADD		(1 <<  1)		/* Misaligned Address Abort Status */
+#define		AT91_MC_ABTSZ		(3 <<  8)		/* Abort Size Status */
+#define			AT91_MC_ABTSZ_BYTE		(0 << 8)
+#define			AT91_MC_ABTSZ_HALFWORD		(1 << 8)
+#define			AT91_MC_ABTSZ_WORD		(2 << 8)
+#define		AT91_MC_ABTTYP		(3 << 10)		/* Abort Type Status */
+#define			AT91_MC_ABTTYP_DATAREAD		(0 << 10)
+#define			AT91_MC_ABTTYP_DATAWRITE	(1 << 10)
+#define			AT91_MC_ABTTYP_FETCH		(2 << 10)
+#define		AT91_MC_MST0		(1 << 16)		/* ARM920T Abort Source */
+#define		AT91_MC_MST1		(1 << 17)		/* PDC Abort Source */
+#define		AT91_MC_MST2		(1 << 18)		/* UHP Abort Source */
+#define		AT91_MC_MST3		(1 << 19)		/* EMAC Abort Source */
+#define		AT91_MC_SVMST0		(1 << 24)		/* Saved ARM920T Abort Source */
+#define		AT91_MC_SVMST1		(1 << 25)		/* Saved PDC Abort Source */
+#define		AT91_MC_SVMST2		(1 << 26)		/* Saved UHP Abort Source */
+#define		AT91_MC_SVMST3		(1 << 27)		/* Saved EMAC Abort Source */
+
+#define AT91_MC_AASR		(AT91_MC + 0x08)	/* MC Abort Address Status Register */
+
+#define AT91_MC_MPR		(AT91_MC + 0x0c)	/* MC Master Priority Register */
+#define		AT91_MPR_MSTP0		(7 <<  0)		/* ARM920T Priority */
+#define		AT91_MPR_MSTP1		(7 <<  4)		/* PDC Priority */
+#define		AT91_MPR_MSTP2		(7 <<  8)		/* UHP Priority */
+#define		AT91_MPR_MSTP3		(7 << 12)		/* EMAC Priority */
+
+/* External Bus Interface (EBI) registers */
+#define AT91_EBI_CSA		(AT91_MC + 0x60)	/* Chip Select Assignment Register */
+#define		AT91_EBI_CS0A		(1 << 0)		/* Chip Select 0 Assignment */
+#define			AT91_EBI_CS0A_SMC		(0 << 0)
+#define			AT91_EBI_CS0A_BFC		(1 << 0)
+#define		AT91_EBI_CS1A		(1 << 1)		/* Chip Select 1 Assignment */
+#define			AT91_EBI_CS1A_SMC		(0 << 1)
+#define			AT91_EBI_CS1A_SDRAMC		(1 << 1)
+#define		AT91_EBI_CS3A		(1 << 3)		/* Chip Select 2 Assignment */
+#define			AT91_EBI_CS3A_SMC		(0 << 3)
+#define			AT91_EBI_CS3A_SMC_SMARTMEDIA	(1 << 3)
+#define		AT91_EBI_CS4A		(1 << 4)		/* Chip Select 3 Assignment */
+#define			AT91_EBI_CS4A_SMC		(0 << 4)
+#define			AT91_EBI_CS4A_SMC_COMPACTFLASH	(1 << 4)
+#define AT91_EBI_CFGR		(AT91_MC + 0x64)	/* Configuration Register */
+#define		AT91_EBI_DBPUC		(1 << 0)		/* Data Bus Pull-Up Configuration */
+
+/* Static Memory Controller (SMC) registers */
+#define	AT91_SMC_CSR(n)		(AT91_MC + 0x70 + ((n) * 4))/* SMC Chip Select Register */
+#define		AT91_SMC_NWS		(0x7f <<  0)		/* Number of Wait States */
+#define			AT91_SMC_NWS_(x)	((x) << 0)
+#define		AT91_SMC_WSEN		(1    <<  7)		/* Wait State Enable */
+#define		AT91_SMC_TDF		(0xf  <<  8)		/* Data Float Time */
+#define			AT91_SMC_TDF_(x)	((x) << 8)
+#define		AT91_SMC_BAT		(1    << 12)		/* Byte Access Type */
+#define		AT91_SMC_DBW		(3    << 13)		/* Data Bus Width */
+#define			AT91_SMC_DBW_16		(1 << 13)
+#define			AT91_SMC_DBW_8		(2 << 13)
+#define		AT91_SMC_DPR		(1 << 15)		/* Data Read Protocol */
+#define		AT91_SMC_ACSS		(3 << 16)		/* Address to Chip Select Setup */
+#define			AT91_SMC_ACSS_STD	(0 << 16)
+#define			AT91_SMC_ACSS_1		(1 << 16)
+#define			AT91_SMC_ACSS_2		(2 << 16)
+#define			AT91_SMC_ACSS_3		(3 << 16)
+#define		AT91_SMC_RWSETUP	(7 << 24)		/* Read & Write Signal Time Setup */
+#define			AT91_SMC_RWSETUP_(x)	((x) << 24)
+#define		AT91_SMC_RWHOLD		(7 << 28)		/* Read & Write Signal Hold Time */
+#define			AT91_SMC_RWHOLD_(x)	((x) << 28)
+
+/* SDRAM Controller registers */
+#define AT91_SDRAMC_MR		(AT91_MC + 0x90)	/* Mode Register */
+#define		AT91_SDRAMC_MODE	(0xf << 0)		/* Command Mode */
+#define			AT91_SDRAMC_MODE_NORMAL		(0 << 0)
+#define			AT91_SDRAMC_MODE_NOP		(1 << 0)
+#define			AT91_SDRAMC_MODE_PRECHARGE	(2 << 0)
+#define			AT91_SDRAMC_MODE_LMR		(3 << 0)
+#define			AT91_SDRAMC_MODE_REFRESH	(4 << 0)
+#define		AT91_SDRAMC_DBW		(1   << 4)		/* Data Bus Width */
+#define			AT91_SDRAMC_DBW_32	(0 << 4)
+#define			AT91_SDRAMC_DBW_16	(1 << 4)
+
+#define AT91_SDRAMC_TR		(AT91_MC + 0x94)	/* Refresh Timer Register */
+#define		AT91_SDRAMC_COUNT	(0xfff << 0)		/* Refresh Timer Count */
+
+#define AT91_SDRAMC_CR		(AT91_MC + 0x98)	/* Configuration Register */
+#define		AT91_SDRAMC_NC		(3   <<  0)		/* Number of Column Bits */
+#define			AT91_SDRAMC_NC_8	(0 << 0)
+#define			AT91_SDRAMC_NC_9	(1 << 0)
+#define			AT91_SDRAMC_NC_10	(2 << 0)
+#define			AT91_SDRAMC_NC_11	(3 << 0)
+#define		AT91_SDRAMC_NR		(3   <<  2)		/* Number of Row Bits */
+#define			AT91_SDRAMC_NR_11	(0 << 2)
+#define			AT91_SDRAMC_NR_12	(1 << 2)
+#define			AT91_SDRAMC_NR_13	(2 << 2)
+#define		AT91_SDRAMC_NB		(1   <<  4)		/* Number of Banks */
+#define			AT91_SDRAMC_NB_2	(0 << 4)
+#define			AT91_SDRAMC_NB_4	(1 << 4)
+#define		AT91_SDRAMC_CAS		(3   <<  5)		/* CAS Latency */
+#define			AT91_SDRAMC_CAS_2	(2 << 5)
+#define		AT91_SDRAMC_TWR		(0xf <<  7)		/* Write Recovery Delay */
+#define		AT91_SDRAMC_TRC		(0xf << 11)		/* Row Cycle Delay */
+#define		AT91_SDRAMC_TRP		(0xf << 15)		/* Row Precharge Delay */
+#define		AT91_SDRAMC_TRCD	(0xf << 19)		/* Row to Column Delay */
+#define		AT91_SDRAMC_TRAS	(0xf << 23)		/* Active to Precharge Delay */
+#define		AT91_SDRAMC_TXSR	(0xf << 27)		/* Exit Self Refresh to Active Delay */
+
+#define AT91_SDRAMC_SRR		(AT91_MC + 0x9c)	/* Self Refresh Register */
+#define AT91_SDRAMC_LPR		(AT91_MC + 0xa0)	/* Low Power Register */
+#define AT91_SDRAMC_IER		(AT91_MC + 0xa4)	/* Interrupt Enable Register */
+#define AT91_SDRAMC_IDR		(AT91_MC + 0xa8)	/* Interrupt Disable Register */
+#define AT91_SDRAMC_IMR		(AT91_MC + 0xac)	/* Interrupt Mask Register */
+#define AT91_SDRAMC_ISR		(AT91_MC + 0xb0)	/* Interrupt Status Register */
+
+/* Burst Flash Controller register */
+#define AT91_BFC_MR		(AT91_MC + 0xc0)	/* Mode Register */
+#define		AT91_BFC_BFCOM		(3   <<  0)		/* Burst Flash Controller Operating Mode */
+#define			AT91_BFC_BFCOM_DISABLED	(0 << 0)
+#define			AT91_BFC_BFCOM_ASYNC	(1 << 0)
+#define			AT91_BFC_BFCOM_BURST	(2 << 0)
+#define		AT91_BFC_BFCC		(3   <<  2)		/* Burst Flash Controller Clock */
+#define			AT91_BFC_BFCC_MCK	(1 << 2)
+#define			AT91_BFC_BFCC_DIV2	(2 << 2)
+#define			AT91_BFC_BFCC_DIV4	(3 << 2)
+#define		AT91_BFC_AVL		(0xf <<  4)		/* Address Valid Latency */
+#define		AT91_BFC_PAGES		(7   <<  8)		/* Page Size */
+#define			AT91_BFC_PAGES_NO_PAGE	(0 << 8)
+#define			AT91_BFC_PAGES_16	(1 << 8)
+#define			AT91_BFC_PAGES_32	(2 << 8)
+#define			AT91_BFC_PAGES_64	(3 << 8)
+#define			AT91_BFC_PAGES_128	(4 << 8)
+#define			AT91_BFC_PAGES_256	(5 << 8)
+#define			AT91_BFC_PAGES_512	(6 << 8)
+#define			AT91_BFC_PAGES_1024	(7 << 8)
+#define		AT91_BFC_OEL		(3   << 12)		/* Output Enable Latency */
+#define		AT91_BFC_BAAEN		(1   << 16)		/* Burst Address Advance Enable */
+#define		AT91_BFC_BFOEH		(1   << 17)		/* Burst Flash Output Enable Handling */
+#define		AT91_BFC_MUXEN		(1   << 18)		/* Multiplexed Bus Enable */
+#define		AT91_BFC_RDYEN		(1   << 19)		/* Ready Enable Mode */
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91sam9260.h b/include/asm-arm/arch-at91/at91sam9260.h
new file mode 100644
index 0000000..73d93ae
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91sam9260.h
@@ -0,0 +1,125 @@
+/*
+ * include/asm-arm/arch-at91/at91sam9260.h
+ *
+ * (C) 2006 Andrew Victor
+ *
+ * Common definitions.
+ * Based on AT91SAM9260 datasheet revision A (Preliminary).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9260_H
+#define AT91SAM9260_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS		1	/* System Peripherals */
+#define AT91SAM9260_ID_PIOA	2	/* Parallel IO Controller A */
+#define AT91SAM9260_ID_PIOB	3	/* Parallel IO Controller B */
+#define AT91SAM9260_ID_PIOC	4	/* Parallel IO Controller C */
+#define AT91SAM9260_ID_ADC	5	/* Analog-to-Digital Converter */
+#define AT91SAM9260_ID_US0	6	/* USART 0 */
+#define AT91SAM9260_ID_US1	7	/* USART 1 */
+#define AT91SAM9260_ID_US2	8	/* USART 2 */
+#define AT91SAM9260_ID_MCI	9	/* Multimedia Card Interface */
+#define AT91SAM9260_ID_UDP	10	/* USB Device Port */
+#define AT91SAM9260_ID_TWI	11	/* Two-Wire Interface */
+#define AT91SAM9260_ID_SPI0	12	/* Serial Peripheral Interface 0 */
+#define AT91SAM9260_ID_SPI1	13	/* Serial Peripheral Interface 1 */
+#define AT91SAM9260_ID_SSC	14	/* Serial Synchronous Controller */
+#define AT91SAM9260_ID_TC0	17	/* Timer Counter 0 */
+#define AT91SAM9260_ID_TC1	18	/* Timer Counter 1 */
+#define AT91SAM9260_ID_TC2	19	/* Timer Counter 2 */
+#define AT91SAM9260_ID_UHP	20	/* USB Host port */
+#define AT91SAM9260_ID_EMAC	21	/* Ethernet */
+#define AT91SAM9260_ID_ISI	22	/* Image Sensor Interface */
+#define AT91SAM9260_ID_US3	23	/* USART 3 */
+#define AT91SAM9260_ID_US4	24	/* USART 4 */
+#define AT91SAM9260_ID_US5	25	/* USART 5 */
+#define AT91SAM9260_ID_TC3	26	/* Timer Counter 3 */
+#define AT91SAM9260_ID_TC4	27	/* Timer Counter 4 */
+#define AT91SAM9260_ID_TC5	28	/* Timer Counter 5 */
+#define AT91SAM9260_ID_IRQ0	29	/* Advanced Interrupt Controller (IRQ0) */
+#define AT91SAM9260_ID_IRQ1	30	/* Advanced Interrupt Controller (IRQ1) */
+#define AT91SAM9260_ID_IRQ2	31	/* Advanced Interrupt Controller (IRQ2) */
+
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9260_BASE_TCB0		0xfffa0000
+#define AT91SAM9260_BASE_TC0		0xfffa0000
+#define AT91SAM9260_BASE_TC1		0xfffa0040
+#define AT91SAM9260_BASE_TC2		0xfffa0080
+#define AT91SAM9260_BASE_UDP		0xfffa4000
+#define AT91SAM9260_BASE_MCI		0xfffa8000
+#define AT91SAM9260_BASE_TWI		0xfffac000
+#define AT91SAM9260_BASE_US0		0xfffb0000
+#define AT91SAM9260_BASE_US1		0xfffb4000
+#define AT91SAM9260_BASE_US2		0xfffb8000
+#define AT91SAM9260_BASE_SSC		0xfffbc000
+#define AT91SAM9260_BASE_ISI		0xfffc0000
+#define AT91SAM9260_BASE_EMAC		0xfffc4000
+#define AT91SAM9260_BASE_SPI0		0xfffc8000
+#define AT91SAM9260_BASE_SPI1		0xfffcc000
+#define AT91SAM9260_BASE_US3		0xfffd0000
+#define AT91SAM9260_BASE_US4		0xfffd4000
+#define AT91SAM9260_BASE_US5		0xfffd8000
+#define AT91SAM9260_BASE_TCB1		0xfffdc000
+#define AT91SAM9260_BASE_TC3		0xfffdc000
+#define AT91SAM9260_BASE_TC4		0xfffdc040
+#define AT91SAM9260_BASE_TC5		0xfffdc080
+#define AT91SAM9260_BASE_ADC		0xfffe0000
+#define AT91_BASE_SYS			0xffffe800
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_ECC	(0xffffe800 - AT91_BASE_SYS)
+#define AT91_SDRAMC	(0xffffea00 - AT91_BASE_SYS)
+#define AT91_SMC	(0xffffec00 - AT91_BASE_SYS)
+#define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
+#define AT91_CCFG	(0xffffef10 - AT91_BASE_SYS)
+#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
+#define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOA	(0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOB	(0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOC	(0xfffff800 - AT91_BASE_SYS)
+#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
+#define AT91_GPBR	(0xfffffd50 - AT91_BASE_SYS)
+
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9260_ROM_BASE	0x00100000	/* Internal ROM base address */
+#define AT91SAM9260_ROM_SIZE	SZ_32K		/* Internal ROM size (32Kb) */
+
+#define AT91SAM9260_SRAM0_BASE	0x00200000	/* Internal SRAM 0 base address */
+#define AT91SAM9260_SRAM0_SIZE	SZ_4K		/* Internal SRAM 0 size (4Kb) */
+#define AT91SAM9260_SRAM1_BASE	0x00300000	/* Internal SRAM 1 base address */
+#define AT91SAM9260_SRAM1_SIZE	SZ_4K		/* Internal SRAM 1 size (4Kb) */
+
+#define AT91SAM9260_UHP_BASE	0x00500000	/* USB Host controller */
+
+#if 0
+/*
+ * PIO pin definitions (peripheral A/B multiplexing).
+ */
+
+// TODO: Add
+
+#endif
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91sam9260_matrix.h b/include/asm-arm/arch-at91/at91sam9260_matrix.h
new file mode 100644
index 0000000..573e97a
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91sam9260_matrix.h
@@ -0,0 +1,78 @@
+/*
+ * include/asm-arm/arch-at91/at91sam9260_matrix.h
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9260 datasheet revision B.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9260_MATRIX_H
+#define AT91SAM9260_MATRIX_H
+
+#define AT91_MATRIX_MCFG0	(AT91_MATRIX + 0x00)	/* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1	(AT91_MATRIX + 0x04)	/* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x04)	/* Master Configuration Register 5 */
+#define		AT91_MATRIX_ULBT		(7 << 0)	/* Undefined Length Burst Type */
+#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
+#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
+#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
+#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
+#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
+
+#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x40)	/* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x44)	/* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x48)	/* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x4C)	/* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x50)	/* Slave Configuration Register 4 */
+#define		AT91_MATRIX_SLOT_CYCLE		(0xff <<  0)	/* Maximum Number of Allowed Cycles for a Burst */
+#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
+#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
+#define		AT91_MATRIX_FIXED_DEFMSTR	(7    << 18)	/* Fixed Index of Default Master */
+#define		AT91_MATRIX_ARBT		(3    << 24)	/* Arbitration Type */
+#define			AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
+#define			AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
+
+#define AT91_MATRIX_PRAS0	(AT91_MATRIX + 0x80)	/* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRAS1	(AT91_MATRIX + 0x88)	/* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRAS2	(AT91_MATRIX + 0x90)	/* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRAS3	(AT91_MATRIX + 0x98)	/* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRAS4	(AT91_MATRIX + 0xA0)	/* Priority Register A for Slave 4 */
+#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
+#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
+#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
+#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
+#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
+#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
+
+#define AT91_MATRIX_MRCR	(AT91_MATRIX + 0x100)	/* Master Remap Control Register */
+#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+
+#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x11C)	/* EBI Chip Select Assignment Register */
+#define		AT91_MATRIX_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
+#define			AT91_MATRIX_CS1A_SMC		(0 << 1)
+#define			AT91_MATRIX_CS1A_SDRAMC		(1 << 1)
+#define		AT91_MATRIX_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
+#define			AT91_MATRIX_CS3A_SMC		(0 << 3)
+#define			AT91_MATRIX_CS3A_SMC_SMARTMEDIA	(1 << 3)
+#define		AT91_MATRIX_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
+#define			AT91_MATRIX_CS4A_SMC		(0 << 4)
+#define			AT91_MATRIX_CS4A_SMC_CF1	(1 << 4)
+#define		AT91_MATRIX_CS5A		(1 << 5 )	/* Chip Select 5 Assignment */
+#define			AT91_MATRIX_CS5A_SMC		(0 << 5)
+#define			AT91_MATRIX_CS5A_SMC_CF2	(1 << 5)
+#define		AT91_MATRIX_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
+#define		AT91_MATRIX_VDDIOMSEL		(1 << 16)	/* Memory voltage selection */
+#define			AT91_MATRIX_VDDIOMSEL_1_8V	(0 << 16)
+#define			AT91_MATRIX_VDDIOMSEL_3_3V	(1 << 16)
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91sam9261.h b/include/asm-arm/arch-at91/at91sam9261.h
new file mode 100644
index 0000000..01b58ff
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91sam9261.h
@@ -0,0 +1,292 @@
+/*
+ * include/asm-arm/arch-at91/at91sam9261.h
+ *
+ * Copyright (C) SAN People
+ *
+ * Common definitions.
+ * Based on AT91SAM9261 datasheet revision E. (Preliminary)
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9261_H
+#define AT91SAM9261_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS		1	/* System Peripherals */
+#define AT91SAM9261_ID_PIOA	2	/* Parallel IO Controller A */
+#define AT91SAM9261_ID_PIOB	3	/* Parallel IO Controller B */
+#define AT91SAM9261_ID_PIOC	4	/* Parallel IO Controller C */
+#define AT91SAM9261_ID_US0	6	/* USART 0 */
+#define AT91SAM9261_ID_US1	7	/* USART 1 */
+#define AT91SAM9261_ID_US2	8	/* USART 2 */
+#define AT91SAM9261_ID_MCI	9	/* Multimedia Card Interface */
+#define AT91SAM9261_ID_UDP	10	/* USB Device Port */
+#define AT91SAM9261_ID_TWI	11	/* Two-Wire Interface */
+#define AT91SAM9261_ID_SPI0	12	/* Serial Peripheral Interface 0 */
+#define AT91SAM9261_ID_SPI1	13	/* Serial Peripheral Interface 1 */
+#define AT91SAM9261_ID_SSC0	14	/* Serial Synchronous Controller 0 */
+#define AT91SAM9261_ID_SSC1	15	/* Serial Synchronous Controller 1 */
+#define AT91SAM9261_ID_SSC2	16	/* Serial Synchronous Controller 2 */
+#define AT91SAM9261_ID_TC0	17	/* Timer Counter 0 */
+#define AT91SAM9261_ID_TC1	18	/* Timer Counter 1 */
+#define AT91SAM9261_ID_TC2	19	/* Timer Counter 2 */
+#define AT91SAM9261_ID_UHP	20	/* USB Host port */
+#define AT91SAM9261_ID_LCDC	21	/* LDC Controller */
+#define AT91SAM9261_ID_IRQ0	29	/* Advanced Interrupt Controller (IRQ0) */
+#define AT91SAM9261_ID_IRQ1	30	/* Advanced Interrupt Controller (IRQ1) */
+#define AT91SAM9261_ID_IRQ2	31	/* Advanced Interrupt Controller (IRQ2) */
+
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9261_BASE_TCB0		0xfffa0000
+#define AT91SAM9261_BASE_TC0		0xfffa0000
+#define AT91SAM9261_BASE_TC1		0xfffa0040
+#define AT91SAM9261_BASE_TC2		0xfffa0080
+#define AT91SAM9261_BASE_UDP		0xfffa4000
+#define AT91SAM9261_BASE_MCI		0xfffa8000
+#define AT91SAM9261_BASE_TWI		0xfffac000
+#define AT91SAM9261_BASE_US0		0xfffb0000
+#define AT91SAM9261_BASE_US1		0xfffb4000
+#define AT91SAM9261_BASE_US2		0xfffb8000
+#define AT91SAM9261_BASE_SSC0		0xfffbc000
+#define AT91SAM9261_BASE_SSC1		0xfffc0000
+#define AT91SAM9261_BASE_SSC2		0xfffc4000
+#define AT91SAM9261_BASE_SPI0		0xfffc8000
+#define AT91SAM9261_BASE_SPI1		0xfffcc000
+#define AT91_BASE_SYS			0xffffea00
+
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_SDRAMC	(0xffffea00 - AT91_BASE_SYS)
+#define AT91_SMC	(0xffffec00 - AT91_BASE_SYS)
+#define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
+#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
+#define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOA	(0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOB	(0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOC	(0xfffff800 - AT91_BASE_SYS)
+#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
+#define AT91_GPBR	(0xfffffd50 - AT91_BASE_SYS)
+
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9261_SRAM_BASE	0x00300000	/* Internal SRAM base address */
+#define AT91SAM9261_SRAM_SIZE	0x00028000	/* Internal SRAM size (160Kb) */
+
+#define AT91SAM9261_ROM_BASE	0x00400000	/* Internal ROM base address */
+#define AT91SAM9261_ROM_SIZE	SZ_32K		/* Internal ROM size (32Kb) */
+
+#define AT91SAM9261_UHP_BASE	0x00500000	/* USB Host controller */
+#define AT91SAM9261_LCDC_BASE	0x00600000	/* LDC controller */
+
+
+#if 0
+/*
+ * PIO pin definitions (peripheral A/B multiplexing).
+ */
+#define AT91_PA0_SPI0_MISO	(1 <<  0)	/* A: SPI0 Master In Slave */
+#define AT91_PA0_MCDA0		(1 <<  0)	/* B: Multimedia Card A Data 0 */
+#define AT91_PA1_SPI0_MOSI	(1 <<  1)	/* A: SPI0 Master Out Slave */
+#define AT91_PA1_MCCDA		(1 <<  1)	/* B: Multimedia Card A Command */
+#define AT91_PA2_SPI0_SPCK	(1 <<  2)	/* A: SPI0 Serial Clock */
+#define AT91_PA2_MCCK		(1 <<  2)	/* B: Multimedia Card Clock */
+#define AT91_PA3_SPI0_NPCS0	(1 <<  3)	/* A: SPI0 Peripheral Chip Select 0 */
+#define AT91_PA4_SPI0_NPCS1	(1 <<  4)	/* A: SPI0 Peripheral Chip Select 1 */
+#define AT91_PA4_MCDA1		(1 <<  4)	/* B: Multimedia Card A Data 1 */
+#define AT91_PA5_SPI0_NPCS2	(1 <<  5)	/* A: SPI0 Peripheral Chip Select 2 */
+#define AT91_PA5_MCDA2		(1 <<  5)	/* B: Multimedia Card A Data 2 */
+#define AT91_PA6_SPI0_NPCS3	(1 <<  6)	/* A: SPI0 Peripheral Chip Select 3 */
+#define AT91_PA6_MCDA3		(1 <<  6)	/* B: Multimedia Card A Data 3 */
+#define AT91_PA7_TWD		(1 <<  7)	/* A: TWI Two-wire Serial Data */
+#define AT91_PA7_PCK0		(1 <<  7)	/* B: PMC Programmable clock Output 0 */
+#define AT91_PA8_TWCK		(1 <<  8)	/* A: TWI Two-wire Serial Clock */
+#define AT91_PA8_PCK1		(1 <<  8)	/* B: PMC Programmable clock Output 1 */
+#define AT91_PA9_DRXD		(1 <<  9)	/* A: DBGU Debug Receive Data */
+#define AT91_PA9_PCK2		(1 <<  9)	/* B: PMC Programmable clock Output 2 */
+#define AT91_PA10_DTXD		(1 << 10)	/* A: DBGU Debug Transmit Data */
+#define AT91_PA10_PCK3		(1 << 10)	/* B: PMC Programmable clock Output 3 */
+#define AT91_PA11_TSYNC		(1 << 11)	/* A: Trace Synchronization Signal */
+#define AT91_PA11_SCK1		(1 << 11)	/* B: USART1 Serial Clock */
+#define AT91_PA12_TCLK		(1 << 12)	/* A: Trace Clock */
+#define AT91_PA12_RTS1		(1 << 12)	/* B: USART1 Ready To Send */
+#define AT91_PA13_TPS0		(1 << 13)	/* A: Trace ARM Pipeline Status 0 */
+#define AT91_PA13_CTS1		(1 << 13)	/* B: USART1 Clear To Send */
+#define AT91_PA14_TPS1		(1 << 14)	/* A: Trace ARM Pipeline Status 1 */
+#define AT91_PA14_SCK2		(1 << 14)	/* B: USART2 Serial Clock */
+#define AT91_PA15_TPS2		(1 << 15)	/* A: Trace ARM Pipeline Status 2 */
+#define AT91_PA15_RTS2		(1 << 15)	/* B: USART2 Ready To Send */
+#define AT91_PA16_TPK0		(1 << 16)	/* A: Trace Packet Port 0 */
+#define AT91_PA16_CTS2		(1 << 16)	/* B: USART2 Clear To Send */
+#define AT91_PA17_TPK1		(1 << 17)	/* A: Trace Packet Port 1 */
+#define AT91_PA17_TF1		(1 << 17)	/* B: SSC1 Transmit Frame Sync */
+#define AT91_PA18_TPK2		(1 << 18)	/* A: Trace Packet Port 2 */
+#define AT91_PA18_TK1		(1 << 18)	/* B: SSC1 Transmit Clock */
+#define AT91_PA19_TPK3		(1 << 19)	/* A: Trace Packet Port 3 */
+#define AT91_PA19_TD1		(1 << 19)	/* B: SSC1 Transmit Data */
+#define AT91_PA20_TPK4		(1 << 20)	/* A: Trace Packet Port 4 */
+#define AT91_PA20_RD1		(1 << 20)	/* B: SSC1 Receive Data */
+#define AT91_PA21_TPK5		(1 << 21)	/* A: Trace Packet Port 5 */
+#define AT91_PA21_RK1		(1 << 21)	/* B: SSC1 Receive Clock */
+#define AT91_PA22_TPK6		(1 << 22)	/* A: Trace Packet Port 6 */
+#define AT91_PA22_RF1		(1 << 22)	/* B: SSC1 Receive Frame Sync */
+#define AT91_PA23_TPK7		(1 << 23)	/* A: Trace Packet Port 7 */
+#define AT91_PA23_RTS0		(1 << 23)	/* B: USART0 Ready To Send */
+#define AT91_PA24_TPK8		(1 << 24)	/* A: Trace Packet Port 8 */
+#define AT91_PA24_SPI1_NPCS1	(1 << 24)	/* B: SPI1 Peripheral Chip Select 1 */
+#define AT91_PA25_TPK9		(1 << 25)	/* A: Trace Packet Port 9 */
+#define AT91_PA25_SPI1_NPCS2	(1 << 25)	/* B: SPI1 Peripheral Chip Select 2 */
+#define AT91_PA26_TPK10		(1 << 26)	/* A: Trace Packet Port 10 */
+#define AT91_PA26_SPI1_NPCS3	(1 << 26)	/* B: SPI1 Peripheral Chip Select 3 */
+#define AT91_PA27_TPK11		(1 << 27)	/* A: Trace Packet Port 11 */
+#define AT91_PA27_SPI0_NPCS1	(1 << 27)	/* B: SPI0 Peripheral Chip Select 1 */
+#define AT91_PA28_TPK12		(1 << 28)	/* A: Trace Packet Port 12 */
+#define AT91_PA28_SPI0_NPCS2	(1 << 28)	/* B: SPI0 Peripheral Chip Select 2 */
+#define AT91_PA29_TPK13		(1 << 29)	/* A: Trace Packet Port 13 */
+#define AT91_PA29_SPI0_NPCS3	(1 << 29)	/* B: SPI0 Peripheral Chip Select 3 */
+#define AT91_PA30_TPK14		(1 << 30)	/* A: Trace Packet Port 14 */
+#define AT91_PA30_A23		(1 << 30)	/* B: Address Bus bit 23 */
+#define AT91_PA31_TPK15		(1 << 31)	/* A: Trace Packet Port 15 */
+#define AT91_PA31_A24		(1 << 31)	/* B: Address Bus bit 24 */
+
+#define AT91_PB0_LCDVSYNC	(1 <<  0)	/* A: LCD Vertical Synchronization */
+#define AT91_PB1_LCDHSYNC	(1 <<  1)	/* A: LCD Horizontal Synchronization */
+#define AT91_PB2_LCDDOTCK	(1 <<  2)	/* A: LCD Dot Clock */
+#define AT91_PB2_PCK0		(1 <<  2)	/* B: PMC Programmable clock Output 0 */
+#define AT91_PB3_LCDDEN		(1 <<  3)	/* A: LCD Data Enable */
+#define AT91_PB4_LCDCC		(1 <<  4)	/* A: LCD Contrast Control */
+#define AT91_PB4_LCDD2		(1 <<  4)	/* B: LCD Data Bus Bit 2 */
+#define AT91_PB5_LCDD0		(1 <<  5)	/* A: LCD Data Bus Bit 0 */
+#define AT91_PB5_LCDD3		(1 <<  5)	/* B: LCD Data Bus Bit 3 */
+#define AT91_PB6_LCDD1		(1 <<  6)	/* A: LCD Data Bus Bit 1 */
+#define AT91_PB6_LCDD4		(1 <<  6)	/* B: LCD Data Bus Bit 4 */
+#define AT91_PB7_LCDD2		(1 <<  7)	/* A: LCD Data Bus Bit 2 */
+#define AT91_PB7_LCDD5		(1 <<  7)	/* B: LCD Data Bus Bit 5 */
+#define AT91_PB8_LCDD3		(1 <<  8)	/* A: LCD Data Bus Bit 3 */
+#define AT91_PB8_LCDD6		(1 <<  8)	/* B: LCD Data Bus Bit 6 */
+#define AT91_PB9_LCDD4		(1 <<  9)	/* A: LCD Data Bus Bit 4 */
+#define AT91_PB9_LCDD7		(1 <<  9)	/* B: LCD Data Bus Bit 7 */
+#define AT91_PB10_LCDD5		(1 << 10)	/* A: LCD Data Bus Bit 5 */
+#define AT91_PB10_LCDD10	(1 << 10)	/* B: LCD Data Bus Bit 10 */
+#define AT91_PB11_LCDD6		(1 << 11)	/* A: LCD Data Bus Bit 6 */
+#define AT91_PB11_LCDD11	(1 << 11)	/* B: LCD Data Bus Bit 11 */
+#define AT91_PB12_LCDD7		(1 << 12)	/* A: LCD Data Bus Bit 7 */
+#define AT91_PB12_LCDD12	(1 << 12)	/* B: LCD Data Bus Bit 12 */
+#define AT91_PB13_LCDD8		(1 << 13)	/* A: LCD Data Bus Bit 8 */
+#define AT91_PB13_LCDD13	(1 << 13)	/* B: LCD Data Bus Bit 13 */
+#define AT91_PB14_LCDD9		(1 << 14)	/* A: LCD Data Bus Bit 9 */
+#define AT91_PB14_LCDD14	(1 << 14)	/* B: LCD Data Bus Bit 14 */
+#define AT91_PB15_LCDD10	(1 << 15)	/* A: LCD Data Bus Bit 10 */
+#define AT91_PB15_LCDD15	(1 << 15)	/* B: LCD Data Bus Bit 15 */
+#define AT91_PB16_LCDD11	(1 << 16)	/* A: LCD Data Bus Bit 11 */
+#define AT91_PB16_LCDD19	(1 << 16)	/* B: LCD Data Bus Bit 19 */
+#define AT91_PB17_LCDD12	(1 << 17)	/* A: LCD Data Bus Bit 12 */
+#define AT91_PB17_LCDD20	(1 << 17)	/* B: LCD Data Bus Bit 20 */
+#define AT91_PB18_LCDD13	(1 << 18)	/* A: LCD Data Bus Bit 13 */
+#define AT91_PB18_LCDD21	(1 << 18)	/* B: LCD Data Bus Bit 21 */
+#define AT91_PB19_LCDD14	(1 << 19)	/* A: LCD Data Bus Bit 14 */
+#define AT91_PB19_LCDD22	(1 << 19)	/* B: LCD Data Bus Bit 22 */
+#define AT91_PB20_LCDD15	(1 << 20)	/* A: LCD Data Bus Bit 15 */
+#define AT91_PB20_LCDD23	(1 << 20)	/* B: LCD Data Bus Bit 23 */
+#define AT91_PB21_TF0		(1 << 21)	/* A: SSC0 Transmit Frame Sync */
+#define AT91_PB21_LCDD16	(1 << 21)	/* B: LCD Data Bus Bit 16 */
+#define AT91_PB22_TK0		(1 << 22)	/* A: SSC0 Transmit Clock */
+#define AT91_PB22_LCDD17	(1 << 22)	/* B: LCD Data Bus Bit 17 */
+#define AT91_PB23_TD0		(1 << 23)	/* A: SSC0 Transmit Data */
+#define AT91_PB23_LCDD18	(1 << 23)	/* B: LCD Data Bus Bit 18 */
+#define AT91_PB24_RD0		(1 << 24)	/* A: SSC0 Receive Data */
+#define AT91_PB24_LCDD19	(1 << 24)	/* B: LCD Data Bus Bit 19 */
+#define AT91_PB25_RK0		(1 << 25)	/* A: SSC0 Receive Clock */
+#define AT91_PB25_LCDD20	(1 << 25)	/* B: LCD Data Bus Bit 20 */
+#define AT91_PB26_RF0		(1 << 26)	/* A: SSC0 Receive Frame Sync */
+#define AT91_PB26_LCDD21	(1 << 26)	/* B: LCD Data Bus Bit 21 */
+#define AT91_PB27_SPI1_NPCS1	(1 << 27)	/* A: SPI1 Peripheral Chip Select 1 */
+#define AT91_PB27_LCDD22	(1 << 27)	/* B: LCD Data Bus Bit 22 */
+#define AT91_PB28_SPI1_NPCS0	(1 << 28)	/* A: SPI1 Peripheral Chip Select 0 */
+#define AT91_PB28_LCDD23	(1 << 28)	/* B: LCD Data Bus Bit 23 */
+#define AT91_PB29_SPI1_SPCK	(1 << 29)	/* A: SPI1 Serial Clock */
+#define AT91_PB29_IRQ2		(1 << 29)	/* B: Interrupt input 2 */
+#define AT91_PB30_SPI1_MISO	(1 << 30)	/* A: SPI1 Master In Slave */
+#define AT91_PB30_IRQ1		(1 << 30)	/* B: Interrupt input 1 */
+#define AT91_PB31_SPI1_MOSI	(1 << 31)	/* A: SPI1 Master Out Slave */
+#define AT91_PB31_PCK2		(1 << 31)	/* B: PMC Programmable clock Output 2 */
+
+#define AT91_PC0_SMOE		(1 << 0)	/* A: SmartMedia Output Enable */
+#define AT91_PC0_NCS6		(1 << 0)	/* B: Chip Select 6 */
+#define AT91_PC1_SMWE		(1 << 1)	/* A: SmartMedia Write Enable */
+#define AT91_PC1_NCS7		(1 << 1)	/* B: Chip Select 7 */
+#define AT91_PC2_NWAIT		(1 << 2)	/* A: NWAIT */
+#define AT91_PC2_IRQ0		(1 << 2)	/* B: Interrupt input 0 */
+#define AT91_PC3_A25_CFRNW	(1 << 3)	/* A: Address Bus[25] / Compact Flash Read Not Write */
+#define AT91_PC4_NCS4_CFCS0	(1 << 4)	/* A: Chip Select 4 / CompactFlash Chip Select 0 */
+#define AT91_PC5_NCS5_CFCS1	(1 << 5)	/* A: Chip Select 5 / CompactFlash Chip Select 1 */
+#define AT91_PC6_CFCE1		(1 << 6)	/* A: CompactFlash Chip Enable 1 */
+#define AT91_PC7_CFCE2		(1 << 7)	/* A: CompactFlash Chip Enable 2 */
+#define AT91_PC8_TXD0		(1 << 8)	/* A: USART0 Transmit Data */
+#define AT91_PC8_PCK2		(1 << 8)	/* B: PMC Programmable clock Output 2 */
+#define AT91_PC9_RXD0		(1 << 9)	/* A: USART0 Receive Data */
+#define AT91_PC9_PCK3		(1 << 9)	/* B: PMC Programmable clock Output 3 */
+#define AT91_PC10_RTS0		(1 << 10)	/* A: USART0 Ready To Send */
+#define AT91_PC10_SCK0		(1 << 10)	/* B: USART0 Serial Clock */
+#define AT91_PC11_CTS0		(1 << 11)	/* A: USART0 Clear To Send */
+#define AT91_PC11_FIQ		(1 << 11)	/* B: AIC Fast Interrupt Input */
+#define AT91_PC12_TXD1		(1 << 12)	/* A: USART1 Transmit Data */
+#define AT91_PC12_NCS6		(1 << 12)	/* B: Chip Select 6 */
+#define AT91_PC13_RXD1		(1 << 13)	/* A: USART1 Receive Data */
+#define AT91_PC13_NCS7		(1 << 13)	/* B: Chip Select 7 */
+#define AT91_PC14_TXD2		(1 << 14)	/* A: USART2 Transmit Data */
+#define AT91_PC14_SPI1_NPCS2	(1 << 14)	/* B: SPI1 Peripheral Chip Select 2 */
+#define AT91_PC15_RXD2		(1 << 15)	/* A: USART2 Receive Data */
+#define AT91_PC15_SPI1_NPCS3	(1 << 15)	/* B: SPI1 Peripheral Chip Select 3 */
+#define AT91_PC16_D16		(1 << 16)	/* A: Data Bus [16] */
+#define AT91_PC16_TCLK0		(1 << 16)	/* B: Timer Counter 0 external clock input */
+#define AT91_PC17_D17		(1 << 17)	/* A: Data Bus [17] */
+#define AT91_PC17_TCLK1		(1 << 17)	/* B: Timer Counter 1 external clock input */
+#define AT91_PC18_D18		(1 << 18)	/* A: Data Bus [18] */
+#define AT91_PC18_TCLK2		(1 << 18)	/* B: Timer Counter 2 external clock input */
+#define AT91_PC19_D19		(1 << 19)	/* A: Data Bus [19] */
+#define AT91_PC19_TIOA0		(1 << 19)	/* B: Timer Counter 0 Multipurpose Timer I/O Pin A */
+#define AT91_PC20_D20		(1 << 20)	/* A: Data Bus [20] */
+#define AT91_PC20_TIOB0		(1 << 20)	/* B: Timer Counter 0 Multipurpose Timer I/O Pin B */
+#define AT91_PC21_D21		(1 << 21)	/* A: Data Bus [21] */
+#define AT91_PC21_TIOA1		(1 << 21)	/* B: Timer Counter 1 Multipurpose Timer I/O Pin A */
+#define AT91_PC22_D22		(1 << 22)	/* A: Data Bus [22] */
+#define AT91_PC22_TIOB1		(1 << 22)	/* B: Timer Counter 1 Multipurpose Timer I/O Pin B */
+#define AT91_PC23_D23		(1 << 23)	/* A: Data Bus [23] */
+#define AT91_PC23_TIOA2		(1 << 23)	/* B: Timer Counter 2 Multipurpose Timer I/O Pin A */
+#define AT91_PC24_D24		(1 << 24)	/* A: Data Bus [24] */
+#define AT91_PC24_TIOB2		(1 << 24)	/* B: Timer Counter 2 Multipurpose Timer I/O Pin B */
+#define AT91_PC25_D25		(1 << 25)	/* A: Data Bus [25] */
+#define AT91_PC25_TF2		(1 << 25)	/* B: SSC2 Transmit Frame Sync */
+#define AT91_PC26_D26		(1 << 26)	/* A: Data Bus [26] */
+#define AT91_PC26_TK2		(1 << 26)	/* B: SSC2 Transmit Clock */
+#define AT91_PC27_D27		(1 << 27)	/* A: Data Bus [27] */
+#define AT91_PC27_TD2		(1 << 27)	/* B: SSC2 Transmit Data */
+#define AT91_PC28_D28		(1 << 28)	/* A: Data Bus [28] */
+#define AT91_PC28_RD2		(1 << 28)	/* B: SSC2 Receive Data */
+#define AT91_PC29_D29		(1 << 29)	/* A: Data Bus [29] */
+#define AT91_PC29_RK2		(1 << 29)	/* B: SSC2 Receive Clock */
+#define AT91_PC30_D30		(1 << 30)	/* A: Data Bus [30] */
+#define AT91_PC30_RF2		(1 << 30)	/* B: SSC2 Receive Frame Sync */
+#define AT91_PC31_D31		(1 << 31)	/* A: Data Bus [31] */
+#define AT91_PC31_PCK1		(1 << 31)	/* B: PMC Programmable clock Output 1 */
+#endif
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91sam9261_matrix.h b/include/asm-arm/arch-at91/at91sam9261_matrix.h
new file mode 100644
index 0000000..6f07242
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91sam9261_matrix.h
@@ -0,0 +1,62 @@
+/*
+ * include/asm-arm/arch-at91/at91sam9261_matrix.h
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9261_MATRIX_H
+#define AT91SAM9261_MATRIX_H
+
+#define AT91_MATRIX_MCFG	(AT91_MATRIX + 0x00)	/* Master Configuration Register */
+#define		AT91_MATRIX_RCB0	(1 << 0)		/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define		AT91_MATRIX_RCB1	(1 << 1)		/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+
+#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x04)	/* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x08)	/* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x0C)	/* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x10)	/* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x14)	/* Slave Configuration Register 4 */
+#define		AT91_MATRIX_SLOT_CYCLE		(0xff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
+#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
+#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
+#define		AT91_MATRIX_FIXED_DEFMSTR	(7    << 18)	/* Fixed Index of Default Master */
+
+#define AT91_MATRIX_TCR		(AT91_MATRIX + 0x24)	/* TCM Configuration Register */
+#define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
+#define			AT91_MATRIX_ITCM_0		(0 << 0)
+#define			AT91_MATRIX_ITCM_16		(5 << 0)
+#define			AT91_MATRIX_ITCM_32		(6 << 0)
+#define			AT91_MATRIX_ITCM_64		(7 << 0)
+#define		AT91_MATRIX_DTCM_SIZE		(0xf << 4)	/* Size of DTCM enabled memory block */
+#define			AT91_MATRIX_DTCM_0		(0 << 4)
+#define			AT91_MATRIX_DTCM_16		(5 << 4)
+#define			AT91_MATRIX_DTCM_32		(6 << 4)
+#define			AT91_MATRIX_DTCM_64		(7 << 4)
+
+#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x30)	/* EBI Chip Select Assignment Register */
+#define		AT91_MATRIX_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
+#define			AT91_MATRIX_CS1A_SMC		(0 << 1)
+#define			AT91_MATRIX_CS1A_SDRAMC		(1 << 1)
+#define		AT91_MATRIX_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
+#define			AT91_MATRIX_CS3A_SMC		(0 << 3)
+#define			AT91_MATRIX_CS3A_SMC_SMARTMEDIA	(1 << 3)
+#define		AT91_MATRIX_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
+#define			AT91_MATRIX_CS4A_SMC		(0 << 4)
+#define			AT91_MATRIX_CS4A_SMC_CF1	(1 << 4)
+#define		AT91_MATRIX_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
+#define			AT91_MATRIX_CS5A_SMC		(0 << 5)
+#define			AT91_MATRIX_CS5A_SMC_CF2	(1 << 5)
+#define		AT91_MATRIX_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
+
+#define AT91_MATRIX_USBPUCR	(AT91_MATRIX + 0x34)	/* USB Pad Pull-Up Control Register */
+#define		AT91_MATRIX_USBPUCR_PUON	(1 << 30)	/* USB Device PAD Pull-up Enable */
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91sam926x_mc.h b/include/asm-arm/arch-at91/at91sam926x_mc.h
new file mode 100644
index 0000000..355eee6
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91sam926x_mc.h
@@ -0,0 +1,134 @@
+/*
+ * include/asm-arm/arch-at91/at91sam926x_mc.h
+ *
+ * Memory Controllers (SMC, SDRAMC) - System peripherals registers.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM926x_MC_H
+#define AT91SAM926x_MC_H
+
+/* SDRAM Controller (SDRAMC) registers */
+#define AT91_SDRAMC_MR		(AT91_SDRAMC + 0x00)	/* SDRAM Controller Mode Register */
+#define		AT91_SDRAMC_MODE	(0xf << 0)		/* Command Mode */
+#define			AT91_SDRAMC_MODE_NORMAL		0
+#define			AT91_SDRAMC_MODE_NOP		1
+#define			AT91_SDRAMC_MODE_PRECHARGE	2
+#define			AT91_SDRAMC_MODE_LMR		3
+#define			AT91_SDRAMC_MODE_REFRESH	4
+#define			AT91_SDRAMC_MODE_EXT_LMR	5
+#define			AT91_SDRAMC_MODE_DEEP		6
+
+#define AT91_SDRAMC_TR		(AT91_SDRAMC + 0x04)	/* SDRAM Controller Refresh Timer Register */
+#define		AT91_SDRAMC_COUNT	(0xfff << 0)		/* Refresh Timer Counter */
+
+#define AT91_SDRAMC_CR		(AT91_SDRAMC + 0x08)	/* SDRAM Controller Configuration Register */
+#define		AT91_SDRAMC_NC		(3 << 0)		/* Number of Column Bits */
+#define			AT91_SDRAMC_NC_8	(0 << 0)
+#define			AT91_SDRAMC_NC_9	(1 << 0)
+#define			AT91_SDRAMC_NC_10	(2 << 0)
+#define			AT91_SDRAMC_NC_11	(3 << 0)
+#define		AT91_SDRAMC_NR		(3 << 2)		/* Number of Row Bits */
+#define			AT91_SDRAMC_NR_11	(0 << 2)
+#define			AT91_SDRAMC_NR_12	(1 << 2)
+#define			AT91_SDRAMC_NR_13	(2 << 2)
+#define		AT91_SDRAMC_NB		(1 << 4)		/* Number of Banks */
+#define			AT91_SDRAMC_NB_2	(0 << 4)
+#define			AT91_SDRAMC_NB_4	(1 << 4)
+#define		AT91_SDRAMC_CAS		(3 << 5)		/* CAS Latency */
+#define			AT91_SDRAMC_CAS_1	(1 << 5)
+#define			AT91_SDRAMC_CAS_2	(2 << 5)
+#define			AT91_SDRAMC_CAS_3	(3 << 5)
+#define		AT91_SDRAMC_DBW		(1 << 7)		/* Data Bus Width */
+#define			AT91_SDRAMC_DBW_32	(0 << 7)
+#define			AT91_SDRAMC_DBW_16	(1 << 7)
+#define		AT91_SDRAMC_TWR		(0xf <<  8)		/* Write Recovery Delay */
+#define		AT91_SDRAMC_TRC		(0xf << 12)		/* Row Cycle Delay */
+#define		AT91_SDRAMC_TRP		(0xf << 16)		/* Row Precharge Delay */
+#define		AT91_SDRAMC_TRCD	(0xf << 20)		/* Row to Column Delay */
+#define		AT91_SDRAMC_TRAS	(0xf << 24)		/* Active to Precharge Delay */
+#define		AT91_SDRAMC_TXSR	(0xf << 28)		/* Exit Self Refresh to Active Delay */
+
+#define AT91_SDRAMC_LPR		(AT91_SDRAMC + 0x10)	/* SDRAM Controller Low Power Register */
+#define		AT91_SDRAMC_LPCB		(3 << 0)	/* Low-power Configurations */
+#define			AT91_SDRAMC_LPCB_DISABLE		0
+#define			AT91_SDRAMC_LPCB_SELF_REFRESH		1
+#define			AT91_SDRAMC_LPCB_POWER_DOWN		2
+#define			AT91_SDRAMC_LPCB_DEEP_POWER_DOWN	3
+#define		AT91_SDRAMC_PASR		(7 << 4)	/* Partial Array Self Refresh */
+#define		AT91_SDRAMC_TCSR		(3 << 8)	/* Temperature Compensated Self Refresh */
+#define		AT91_SDRAMC_DS			(3 << 10)	/* Drive Strenght */
+#define		AT91_SDRAMC_TIMEOUT		(3 << 12)	/* Time to define when Low Power Mode is enabled */
+#define			AT91_SDRAMC_TIMEOUT_0_CLK_CYCLES	(0 << 12)
+#define			AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES	(1 << 12)
+#define			AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES	(2 << 12)
+
+#define AT91_SDRAMC_IER		(AT91_SDRAMC + 0x14)	/* SDRAM Controller Interrupt Enable Register */
+#define AT91_SDRAMC_IDR		(AT91_SDRAMC + 0x18)	/* SDRAM Controller Interrupt Disable Register */
+#define AT91_SDRAMC_IMR		(AT91_SDRAMC + 0x1C)	/* SDRAM Controller Interrupt Mask Register */
+#define AT91_SDRAMC_ISR		(AT91_SDRAMC + 0x20)	/* SDRAM Controller Interrupt Status Register */
+#define		AT91_SDRAMC_RES		(1 << 0)		/* Refresh Error Status */
+
+#define AT91_SDRAMC_MDR		(AT91_SDRAMC + 0x24)	/* SDRAM Memory Device Register */
+#define		AT91_SDRAMC_MD		(3 << 0)		/* Memory Device Type */
+#define			AT91_SDRAMC_MD_SDRAM		0
+#define			AT91_SDRAMC_MD_LOW_POWER_SDRAM	1
+
+
+/* Static Memory Controller (SMC) registers */
+#define AT91_SMC_SETUP(n)	(AT91_SMC + 0x00 + ((n)*0x10))	/* Setup Register for CS n */
+#define		AT91_SMC_NWESETUP	(0x3f << 0)			/* NWE Setup Length */
+#define			AT91_SMC_NWESETUP_(x)	((x) << 0)
+#define		AT91_SMC_NCS_WRSETUP	(0x3f << 8)			/* NCS Setup Length in Write Access */
+#define			AT91_SMC_NCS_WRSETUP_(x)	((x) << 8)
+#define		AT91_SMC_NRDSETUP	(0x3f << 16)			/* NRD Setup Length */
+#define			AT91_SMC_NRDSETUP_(x)	((x) << 16)
+#define		AT91_SMC_NCS_RDSETUP	(0x3f << 24)			/* NCS Setup Length in Read Access */
+#define			AT91_SMC_NCS_RDSETUP_(x)	((x) << 24)
+
+#define AT91_SMC_PULSE(n)	(AT91_SMC + 0x04 + ((n)*0x10))	/* Pulse Register for CS n */
+#define		AT91_SMC_NWEPULSE	(0x7f <<  0)			/* NWE Pulse Length */
+#define			AT91_SMC_NWEPULSE_(x)	((x) << 0)
+#define		AT91_SMC_NCS_WRPULSE	(0x7f <<  8)			/* NCS Pulse Length in Write Access */
+#define			AT91_SMC_NCS_WRPULSE_(x)((x) << 8)
+#define		AT91_SMC_NRDPULSE	(0x7f << 16)			/* NRD Pulse Length */
+#define			AT91_SMC_NRDPULSE_(x)	((x) << 16)
+#define		AT91_SMC_NCS_RDPULSE	(0x7f << 24)			/* NCS Pulse Length in Read Access */
+#define			AT91_SMC_NCS_RDPULSE_(x)((x) << 24)
+
+#define AT91_SMC_CYCLE(n)	(AT91_SMC + 0x08 + ((n)*0x10))	/* Cycle Register for CS n */
+#define		AT91_SMC_NWECYCLE	(0x1ff << 0 )			/* Total Write Cycle Length */
+#define			AT91_SMC_NWECYCLE_(x)	((x) << 0)
+#define		AT91_SMC_NRDCYCLE	(0x1ff << 16)			/* Total Read Cycle Length */
+#define			AT91_SMC_NRDCYCLE_(x)	((x) << 16)
+
+#define AT91_SMC_MODE(n)	(AT91_SMC + 0x0c + ((n)*0x10))	/* Mode Register for CS n */
+#define		AT91_SMC_READMODE	(1 <<  0)			/* Read Mode */
+#define		AT91_SMC_WRITEMODE	(1 <<  1)			/* Write Mode */
+#define		AT91_SMC_EXNWMODE	(3 <<  4)			/* NWAIT Mode */
+#define			AT91_SMC_EXNWMODE_DISABLE	(0 << 4)
+#define			AT91_SMC_EXNWMODE_FROZEN	(2 << 4)
+#define			AT91_SMC_EXNWMODE_READY		(3 << 4)
+#define		AT91_SMC_BAT		(1 <<  8)			/* Byte Access Type */
+#define			AT91_SMC_BAT_SELECT		(0 << 8)
+#define			AT91_SMC_BAT_WRITE		(1 << 8)
+#define		AT91_SMC_DBW		(3 << 12)			/* Data Bus Width */
+#define			AT91_SMC_DBW_8			(0 << 12)
+#define			AT91_SMC_DBW_16			(1 << 12)
+#define			AT91_SMC_DBW_32			(2 << 12)
+#define		AT91_SMC_TDF		(0xf << 16)			/* Data Float Time. */
+#define			AT91_SMC_TDF_(x)		((x) << 16)
+#define		AT91_SMC_TDFMODE	(1 << 20)			/* TDF Optimization - Enabled */
+#define		AT91_SMC_PMEN		(1 << 24)			/* Page Mode Enabled */
+#define		AT91_SMC_PS		(3 << 28)			/* Page Size */
+#define			AT91_SMC_PS_4			(0 << 28)
+#define			AT91_SMC_PS_8			(1 << 28)
+#define			AT91_SMC_PS_16			(2 << 28)
+#define			AT91_SMC_PS_32			(3 << 28)
+
+#endif
diff --git a/include/asm-arm/arch-at91/board.h b/include/asm-arm/arch-at91/board.h
new file mode 100644
index 0000000..bf1afd0
--- /dev/null
+++ b/include/asm-arm/arch-at91/board.h
@@ -0,0 +1,121 @@
+/*
+ * include/asm-arm/arch-at91/board.h
+ *
+ *  Copyright (C) 2005 HP Labs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+/*
+ * These are data structures found in platform_device.dev.platform_data,
+ * and describing board-specific data needed by drivers.  For example,
+ * which pin is used for a given GPIO role.
+ *
+ * In 2.6, drivers should strongly avoid board-specific knowledge so
+ * that supporting new boards normally won't require driver patches.
+ * Most board-specific knowledge should be in arch/.../board-*.c files.
+ */
+
+#ifndef __ASM_ARCH_BOARD_H
+#define __ASM_ARCH_BOARD_H
+
+#include <linux/mtd/partitions.h>
+#include <linux/device.h>
+#include <linux/spi/spi.h>
+
+ /* USB Device */
+struct at91_udc_data {
+	u8	vbus_pin;		/* high == host powering us */
+	u8	pullup_pin;		/* high == D+ pulled up */
+};
+extern void __init at91_add_device_udc(struct at91_udc_data *data);
+
+ /* Compact Flash */
+struct at91_cf_data {
+	u8	irq_pin;		/* I/O IRQ */
+	u8	det_pin;		/* Card detect */
+	u8	vcc_pin;		/* power switching */
+	u8	rst_pin;		/* card reset */
+	u8	chipselect;		/* EBI Chip Select number */
+};
+extern void __init at91_add_device_cf(struct at91_cf_data *data);
+
+ /* MMC / SD */
+struct at91_mmc_data {
+	u8		det_pin;	/* card detect IRQ */
+	unsigned	slot_b:1;	/* uses Slot B */
+	unsigned	wire4:1;	/* (SD) supports DAT0..DAT3 */
+	u8		wp_pin;		/* (SD) writeprotect detect */
+	u8		vcc_pin;	/* power switching (high == on) */
+};
+extern void __init at91_add_device_mmc(struct at91_mmc_data *data);
+
+ /* Ethernet */
+struct at91_eth_data {
+	u8		phy_irq_pin;	/* PHY IRQ */
+	u8		is_rmii;	/* using RMII interface? */
+};
+extern void __init at91_add_device_eth(struct at91_eth_data *data);
+
+#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263)
+#define eth_platform_data	at91_eth_data
+#endif
+
+ /* USB Host */
+struct at91_usbh_data {
+	u8		ports;		/* number of ports on root hub */
+};
+extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
+
+ /* NAND / SmartMedia */
+struct at91_nand_data {
+	u8		enable_pin;	/* chip enable */
+	u8		det_pin;	/* card detect */
+	u8		rdy_pin;	/* ready/busy */
+	u8		ale;		/* address line number connected to ALE */
+	u8		cle;		/* address line number connected to CLE */
+	u8		bus_width_16;	/* buswidth is 16 bit */
+	struct mtd_partition* (*partition_info)(int, int*);
+};
+extern void __init at91_add_device_nand(struct at91_nand_data *data);
+
+ /* I2C*/
+extern void __init at91_add_device_i2c(void);
+
+ /* SPI */
+extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices);
+
+ /* Serial */
+struct at91_uart_config {
+	unsigned short	console_tty;	/* tty number of serial console */
+	unsigned short	nr_tty;		/* number of serial tty's */
+	short		tty_map[];	/* map UART to tty number */
+};
+extern struct platform_device *atmel_default_console_device;
+extern void __init at91_init_serial(struct at91_uart_config *config);
+
+struct atmel_uart_data {
+	short		use_dma_tx;	/* use transmit DMA? */
+	short		use_dma_rx;	/* use receive DMA? */
+	void __iomem	*regs;		/* virtual base address, if any */
+};
+extern void __init at91_add_device_serial(void);
+
+ /* LEDs */
+extern u8 at91_leds_cpu;
+extern u8 at91_leds_timer;
+extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
+
+#endif
diff --git a/include/asm-arm/arch-at91/cpu.h b/include/asm-arm/arch-at91/cpu.h
new file mode 100644
index 0000000..762eb41
--- /dev/null
+++ b/include/asm-arm/arch-at91/cpu.h
@@ -0,0 +1,49 @@
+/*
+ * include/asm-arm/arch-at91/cpu.h
+ *
+ *  Copyright (C) 2006 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_CPU_H
+#define __ASM_ARCH_CPU_H
+
+#include <asm/hardware.h>
+#include <asm/arch/at91_dbgu.h>
+
+
+#define ARCH_ID_AT91RM9200	0x09290780
+#define ARCH_ID_AT91SAM9260	0x019803a0
+#define ARCH_ID_AT91SAM9261	0x019703a0
+
+
+static inline unsigned long at91_cpu_identify(void)
+{
+	return (at91_sys_read(AT91_DBGU_CIDR) & ~AT91_CIDR_VERSION);
+}
+
+
+#ifdef CONFIG_ARCH_AT91RM9200
+#define cpu_is_at91rm9200()	(at91_cpu_identify() == ARCH_ID_AT91RM9200)
+#else
+#define cpu_is_at91rm9200()	(0)
+#endif
+
+#ifdef CONFIG_ARCH_AT91SAM9260
+#define cpu_is_at91sam9260()	(at91_cpu_identify() == ARCH_ID_AT91SAM9260)
+#else
+#define cpu_is_at91sam9260()	(0)
+#endif
+
+#ifdef CONFIG_ARCH_AT91SAM9261
+#define cpu_is_at91sam9261()	(at91_cpu_identify() == ARCH_ID_AT91SAM9261)
+#else
+#define cpu_is_at91sam9261()	(0)
+#endif
+
+#endif
diff --git a/include/asm-arm/arch-at91/debug-macro.S b/include/asm-arm/arch-at91/debug-macro.S
new file mode 100644
index 0000000..20721ef
--- /dev/null
+++ b/include/asm-arm/arch-at91/debug-macro.S
@@ -0,0 +1,39 @@
+/*
+ * include/asm-arm/arch-at91/debug-macro.S
+ *
+ *  Copyright (C) 2003-2005 SAN People
+ *
+ * Debugging macro include header
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#include <asm/hardware.h>
+#include <asm/arch/at91_dbgu.h>
+
+	.macro	addruart,rx
+	mrc	p15, 0, \rx, c1, c0
+	tst	\rx, #1				@ MMU enabled?
+	ldreq	\rx, =AT91_BASE_SYS		@ System peripherals (phys address)
+	ldrne	\rx, =AT91_VA_BASE_SYS		@ System peripherals (virt address)
+	.endm
+
+	.macro	senduart,rd,rx
+	strb	\rd, [\rx, #AT91_DBGU_THR]	@ Write to Transmitter Holding Register
+	.endm
+
+	.macro	waituart,rd,rx
+1001:	ldr	\rd, [\rx, #AT91_DBGU_SR]	@ Read Status Register
+	tst	\rd, #AT91_DBGU_TXRDY		@ DBGU_TXRDY = 1 when ready to transmit
+	beq	1001b
+	.endm
+
+	.macro	busyuart,rd,rx
+1001:	ldr	\rd, [\rx, #AT91_DBGU_SR]	@ Read Status Register
+	tst	\rd, #AT91_DBGU_TXEMPTY		@ DBGU_TXEMPTY = 1 when transmission complete
+	beq	1001b
+	.endm
+
diff --git a/include/asm-arm/arch-at91/dma.h b/include/asm-arm/arch-at91/dma.h
new file mode 100644
index 0000000..7745654
--- /dev/null
+++ b/include/asm-arm/arch-at91/dma.h
@@ -0,0 +1,19 @@
+/*
+ * include/asm-arm/arch-at91/dma.h
+ *
+ *  Copyright (C) 2003 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
diff --git a/include/asm-arm/arch-at91/entry-macro.S b/include/asm-arm/arch-at91/entry-macro.S
new file mode 100644
index 0000000..a6f3383
--- /dev/null
+++ b/include/asm-arm/arch-at91/entry-macro.S
@@ -0,0 +1,26 @@
+/*
+ * include/asm-arm/arch-at91/entry-macro.S
+ *
+ *  Copyright (C) 2003-2005 SAN People
+ *
+ * Low-level IRQ helper macros for AT91RM9200 platforms
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <asm/hardware.h>
+#include <asm/arch/at91_aic.h>
+
+	.macro	disable_fiq
+	.endm
+
+	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
+	ldr	\base, =(AT91_VA_BASE_SYS)		@ base virtual address of SYS peripherals
+	ldr	\irqnr, [\base, #AT91_AIC_IVR]		@ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
+	ldr	\irqstat, [\base, #AT91_AIC_ISR]	@ read interrupt source number
+	teq	\irqstat, #0				@ ISR is 0 when no current interrupt, or spurious interrupt
+	streq	\tmp, [\base, #AT91_AIC_EOICR]		@ not going to be handled further, then ACK it now.
+	.endm
+
diff --git a/include/asm-arm/arch-at91/gpio.h b/include/asm-arm/arch-at91/gpio.h
new file mode 100644
index 0000000..6d1a5eb
--- /dev/null
+++ b/include/asm-arm/arch-at91/gpio.h
@@ -0,0 +1,199 @@
+/*
+ * include/asm-arm/arch-at91/gpio.h
+ *
+ *  Copyright (C) 2005 HP Labs
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_AT91RM9200_GPIO_H
+#define __ASM_ARCH_AT91RM9200_GPIO_H
+
+#include <asm/irq.h>
+
+#define PIN_BASE		NR_AIC_IRQS
+
+#define MAX_GPIO_BANKS		4
+
+/* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */
+
+#define	AT91_PIN_PA0	(PIN_BASE + 0x00 + 0)
+#define	AT91_PIN_PA1	(PIN_BASE + 0x00 + 1)
+#define	AT91_PIN_PA2	(PIN_BASE + 0x00 + 2)
+#define	AT91_PIN_PA3	(PIN_BASE + 0x00 + 3)
+#define	AT91_PIN_PA4	(PIN_BASE + 0x00 + 4)
+
+#define	AT91_PIN_PA5	(PIN_BASE + 0x00 + 5)
+#define	AT91_PIN_PA6	(PIN_BASE + 0x00 + 6)
+#define	AT91_PIN_PA7	(PIN_BASE + 0x00 + 7)
+#define	AT91_PIN_PA8	(PIN_BASE + 0x00 + 8)
+#define	AT91_PIN_PA9	(PIN_BASE + 0x00 + 9)
+
+#define	AT91_PIN_PA10	(PIN_BASE + 0x00 + 10)
+#define	AT91_PIN_PA11	(PIN_BASE + 0x00 + 11)
+#define	AT91_PIN_PA12	(PIN_BASE + 0x00 + 12)
+#define	AT91_PIN_PA13	(PIN_BASE + 0x00 + 13)
+#define	AT91_PIN_PA14	(PIN_BASE + 0x00 + 14)
+
+#define	AT91_PIN_PA15	(PIN_BASE + 0x00 + 15)
+#define	AT91_PIN_PA16	(PIN_BASE + 0x00 + 16)
+#define	AT91_PIN_PA17	(PIN_BASE + 0x00 + 17)
+#define	AT91_PIN_PA18	(PIN_BASE + 0x00 + 18)
+#define	AT91_PIN_PA19	(PIN_BASE + 0x00 + 19)
+
+#define	AT91_PIN_PA20	(PIN_BASE + 0x00 + 20)
+#define	AT91_PIN_PA21	(PIN_BASE + 0x00 + 21)
+#define	AT91_PIN_PA22	(PIN_BASE + 0x00 + 22)
+#define	AT91_PIN_PA23	(PIN_BASE + 0x00 + 23)
+#define	AT91_PIN_PA24	(PIN_BASE + 0x00 + 24)
+
+#define	AT91_PIN_PA25	(PIN_BASE + 0x00 + 25)
+#define	AT91_PIN_PA26	(PIN_BASE + 0x00 + 26)
+#define	AT91_PIN_PA27	(PIN_BASE + 0x00 + 27)
+#define	AT91_PIN_PA28	(PIN_BASE + 0x00 + 28)
+#define	AT91_PIN_PA29	(PIN_BASE + 0x00 + 29)
+
+#define	AT91_PIN_PA30	(PIN_BASE + 0x00 + 30)
+#define	AT91_PIN_PA31	(PIN_BASE + 0x00 + 31)
+
+#define	AT91_PIN_PB0	(PIN_BASE + 0x20 + 0)
+#define	AT91_PIN_PB1	(PIN_BASE + 0x20 + 1)
+#define	AT91_PIN_PB2	(PIN_BASE + 0x20 + 2)
+#define	AT91_PIN_PB3	(PIN_BASE + 0x20 + 3)
+#define	AT91_PIN_PB4	(PIN_BASE + 0x20 + 4)
+
+#define	AT91_PIN_PB5	(PIN_BASE + 0x20 + 5)
+#define	AT91_PIN_PB6	(PIN_BASE + 0x20 + 6)
+#define	AT91_PIN_PB7	(PIN_BASE + 0x20 + 7)
+#define	AT91_PIN_PB8	(PIN_BASE + 0x20 + 8)
+#define	AT91_PIN_PB9	(PIN_BASE + 0x20 + 9)
+
+#define	AT91_PIN_PB10	(PIN_BASE + 0x20 + 10)
+#define	AT91_PIN_PB11	(PIN_BASE + 0x20 + 11)
+#define	AT91_PIN_PB12	(PIN_BASE + 0x20 + 12)
+#define	AT91_PIN_PB13	(PIN_BASE + 0x20 + 13)
+#define	AT91_PIN_PB14	(PIN_BASE + 0x20 + 14)
+
+#define	AT91_PIN_PB15	(PIN_BASE + 0x20 + 15)
+#define	AT91_PIN_PB16	(PIN_BASE + 0x20 + 16)
+#define	AT91_PIN_PB17	(PIN_BASE + 0x20 + 17)
+#define	AT91_PIN_PB18	(PIN_BASE + 0x20 + 18)
+#define	AT91_PIN_PB19	(PIN_BASE + 0x20 + 19)
+
+#define	AT91_PIN_PB20	(PIN_BASE + 0x20 + 20)
+#define	AT91_PIN_PB21	(PIN_BASE + 0x20 + 21)
+#define	AT91_PIN_PB22	(PIN_BASE + 0x20 + 22)
+#define	AT91_PIN_PB23	(PIN_BASE + 0x20 + 23)
+#define	AT91_PIN_PB24	(PIN_BASE + 0x20 + 24)
+
+#define	AT91_PIN_PB25	(PIN_BASE + 0x20 + 25)
+#define	AT91_PIN_PB26	(PIN_BASE + 0x20 + 26)
+#define	AT91_PIN_PB27	(PIN_BASE + 0x20 + 27)
+#define	AT91_PIN_PB28	(PIN_BASE + 0x20 + 28)
+#define	AT91_PIN_PB29	(PIN_BASE + 0x20 + 29)
+
+#define	AT91_PIN_PB30	(PIN_BASE + 0x20 + 30)
+#define	AT91_PIN_PB31	(PIN_BASE + 0x20 + 31)
+
+#define	AT91_PIN_PC0	(PIN_BASE + 0x40 + 0)
+#define	AT91_PIN_PC1	(PIN_BASE + 0x40 + 1)
+#define	AT91_PIN_PC2	(PIN_BASE + 0x40 + 2)
+#define	AT91_PIN_PC3	(PIN_BASE + 0x40 + 3)
+#define	AT91_PIN_PC4	(PIN_BASE + 0x40 + 4)
+
+#define	AT91_PIN_PC5	(PIN_BASE + 0x40 + 5)
+#define	AT91_PIN_PC6	(PIN_BASE + 0x40 + 6)
+#define	AT91_PIN_PC7	(PIN_BASE + 0x40 + 7)
+#define	AT91_PIN_PC8	(PIN_BASE + 0x40 + 8)
+#define	AT91_PIN_PC9	(PIN_BASE + 0x40 + 9)
+
+#define	AT91_PIN_PC10	(PIN_BASE + 0x40 + 10)
+#define	AT91_PIN_PC11	(PIN_BASE + 0x40 + 11)
+#define	AT91_PIN_PC12	(PIN_BASE + 0x40 + 12)
+#define	AT91_PIN_PC13	(PIN_BASE + 0x40 + 13)
+#define	AT91_PIN_PC14	(PIN_BASE + 0x40 + 14)
+
+#define	AT91_PIN_PC15	(PIN_BASE + 0x40 + 15)
+#define	AT91_PIN_PC16	(PIN_BASE + 0x40 + 16)
+#define	AT91_PIN_PC17	(PIN_BASE + 0x40 + 17)
+#define	AT91_PIN_PC18	(PIN_BASE + 0x40 + 18)
+#define	AT91_PIN_PC19	(PIN_BASE + 0x40 + 19)
+
+#define	AT91_PIN_PC20	(PIN_BASE + 0x40 + 20)
+#define	AT91_PIN_PC21	(PIN_BASE + 0x40 + 21)
+#define	AT91_PIN_PC22	(PIN_BASE + 0x40 + 22)
+#define	AT91_PIN_PC23	(PIN_BASE + 0x40 + 23)
+#define	AT91_PIN_PC24	(PIN_BASE + 0x40 + 24)
+
+#define	AT91_PIN_PC25	(PIN_BASE + 0x40 + 25)
+#define	AT91_PIN_PC26	(PIN_BASE + 0x40 + 26)
+#define	AT91_PIN_PC27	(PIN_BASE + 0x40 + 27)
+#define	AT91_PIN_PC28	(PIN_BASE + 0x40 + 28)
+#define	AT91_PIN_PC29	(PIN_BASE + 0x40 + 29)
+
+#define	AT91_PIN_PC30	(PIN_BASE + 0x40 + 30)
+#define	AT91_PIN_PC31	(PIN_BASE + 0x40 + 31)
+
+#define	AT91_PIN_PD0	(PIN_BASE + 0x60 + 0)
+#define	AT91_PIN_PD1	(PIN_BASE + 0x60 + 1)
+#define	AT91_PIN_PD2	(PIN_BASE + 0x60 + 2)
+#define	AT91_PIN_PD3	(PIN_BASE + 0x60 + 3)
+#define	AT91_PIN_PD4	(PIN_BASE + 0x60 + 4)
+
+#define	AT91_PIN_PD5	(PIN_BASE + 0x60 + 5)
+#define	AT91_PIN_PD6	(PIN_BASE + 0x60 + 6)
+#define	AT91_PIN_PD7	(PIN_BASE + 0x60 + 7)
+#define	AT91_PIN_PD8	(PIN_BASE + 0x60 + 8)
+#define	AT91_PIN_PD9	(PIN_BASE + 0x60 + 9)
+
+#define	AT91_PIN_PD10	(PIN_BASE + 0x60 + 10)
+#define	AT91_PIN_PD11	(PIN_BASE + 0x60 + 11)
+#define	AT91_PIN_PD12	(PIN_BASE + 0x60 + 12)
+#define	AT91_PIN_PD13	(PIN_BASE + 0x60 + 13)
+#define	AT91_PIN_PD14	(PIN_BASE + 0x60 + 14)
+
+#define	AT91_PIN_PD15	(PIN_BASE + 0x60 + 15)
+#define	AT91_PIN_PD16	(PIN_BASE + 0x60 + 16)
+#define	AT91_PIN_PD17	(PIN_BASE + 0x60 + 17)
+#define	AT91_PIN_PD18	(PIN_BASE + 0x60 + 18)
+#define	AT91_PIN_PD19	(PIN_BASE + 0x60 + 19)
+
+#define	AT91_PIN_PD20	(PIN_BASE + 0x60 + 20)
+#define	AT91_PIN_PD21	(PIN_BASE + 0x60 + 21)
+#define	AT91_PIN_PD22	(PIN_BASE + 0x60 + 22)
+#define	AT91_PIN_PD23	(PIN_BASE + 0x60 + 23)
+#define	AT91_PIN_PD24	(PIN_BASE + 0x60 + 24)
+
+#define	AT91_PIN_PD25	(PIN_BASE + 0x60 + 25)
+#define	AT91_PIN_PD26	(PIN_BASE + 0x60 + 26)
+#define	AT91_PIN_PD27	(PIN_BASE + 0x60 + 27)
+#define	AT91_PIN_PD28	(PIN_BASE + 0x60 + 28)
+#define	AT91_PIN_PD29	(PIN_BASE + 0x60 + 29)
+
+#define	AT91_PIN_PD30	(PIN_BASE + 0x60 + 30)
+#define	AT91_PIN_PD31	(PIN_BASE + 0x60 + 31)
+
+#ifndef __ASSEMBLY__
+/* setup setup routines, called from board init or driver probe() */
+extern int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup);
+extern int __init_or_module at91_set_B_periph(unsigned pin, int use_pullup);
+extern int __init_or_module at91_set_gpio_input(unsigned pin, int use_pullup);
+extern int __init_or_module at91_set_gpio_output(unsigned pin, int value);
+extern int __init_or_module at91_set_deglitch(unsigned pin, int is_on);
+extern int __init_or_module at91_set_multi_drive(unsigned pin, int is_on);
+
+/* callable at any time */
+extern int at91_set_gpio_value(unsigned pin, int value);
+extern int at91_get_gpio_value(unsigned pin);
+
+/* callable only from core power-management code */
+extern void at91_gpio_suspend(void);
+extern void at91_gpio_resume(void);
+#endif
+
+#endif
+
diff --git a/include/asm-arm/arch-at91/hardware.h b/include/asm-arm/arch-at91/hardware.h
new file mode 100644
index 0000000..ccb7c72
--- /dev/null
+++ b/include/asm-arm/arch-at91/hardware.h
@@ -0,0 +1,88 @@
+/*
+ * include/asm-arm/arch-at91/hardware.h
+ *
+ *  Copyright (C) 2003 SAN People
+ *  Copyright (C) 2003 ATMEL
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ */
+
+#ifndef __ASM_ARCH_HARDWARE_H
+#define __ASM_ARCH_HARDWARE_H
+
+#include <asm/sizes.h>
+
+#if defined(CONFIG_ARCH_AT91RM9200)
+#include <asm/arch/at91rm9200.h>
+#elif defined(CONFIG_ARCH_AT91SAM9260)
+#include <asm/arch/at91sam9260.h>
+#elif defined(CONFIG_ARCH_AT91SAM9261)
+#include <asm/arch/at91sam9261.h>
+#else
+#error "Unsupported AT91 processor"
+#endif
+
+
+/*
+ * Remap the peripherals from address 0xFFFA0000 .. 0xFFFFFFFF
+ * to 0xFEFA0000 .. 0xFF000000.  (384Kb)
+ */
+#define AT91_IO_PHYS_BASE	0xFFFA0000
+#define AT91_IO_SIZE		(0xFFFFFFFF - AT91_IO_PHYS_BASE + 1)
+#define AT91_IO_VIRT_BASE	(0xFF000000 - AT91_IO_SIZE)
+
+ /* Convert a physical IO address to virtual IO address */
+#define AT91_IO_P2V(x)	((x) - AT91_IO_PHYS_BASE + AT91_IO_VIRT_BASE)
+
+/*
+ * Virtual to Physical Address mapping for IO devices.
+ */
+#define AT91_VA_BASE_SYS	AT91_IO_P2V(AT91_BASE_SYS)
+#define AT91_VA_BASE_EMAC	AT91_IO_P2V(AT91RM9200_BASE_EMAC)
+
+ /* Internal SRAM is mapped below the IO devices */
+#define AT91_SRAM_MAX		SZ_1M
+#define AT91_VIRT_BASE		(AT91_IO_VIRT_BASE - AT91_SRAM_MAX)
+
+/* Serial ports */
+#define ATMEL_MAX_UART		7		/* 6 USART3's and one DBGU port (SAM9260) */
+
+/* External Memory Map */
+#define AT91_CHIPSELECT_0	0x10000000
+#define AT91_CHIPSELECT_1	0x20000000
+#define AT91_CHIPSELECT_2	0x30000000
+#define AT91_CHIPSELECT_3	0x40000000
+#define AT91_CHIPSELECT_4	0x50000000
+#define AT91_CHIPSELECT_5	0x60000000
+#define AT91_CHIPSELECT_6	0x70000000
+#define AT91_CHIPSELECT_7	0x80000000
+
+/* SDRAM */
+#define AT91_SDRAM_BASE		AT91_CHIPSELECT_1
+
+/* Clocks */
+#define AT91_SLOW_CLOCK		32768		/* slow clock */
+
+#ifndef __ASSEMBLY__
+#include <asm/io.h>
+
+static inline unsigned int at91_sys_read(unsigned int reg_offset)
+{
+	void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
+
+	return __raw_readl(addr + reg_offset);
+}
+
+static inline void at91_sys_write(unsigned int reg_offset, unsigned long value)
+{
+	void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
+
+	__raw_writel(value, addr + reg_offset);
+}
+#endif
+
+#endif
diff --git a/include/asm-arm/arch-at91/io.h b/include/asm-arm/arch-at91/io.h
new file mode 100644
index 0000000..401f327
--- /dev/null
+++ b/include/asm-arm/arch-at91/io.h
@@ -0,0 +1,32 @@
+/*
+ * include/asm-arm/arch-at91/io.h
+ *
+ *  Copyright (C) 2003 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_IO_H
+#define __ASM_ARCH_IO_H
+
+#include <asm/io.h>
+
+#define IO_SPACE_LIMIT		0xFFFFFFFF
+
+#define __io(a)			((void __iomem *)(a))
+#define __mem_pci(a)		(a)
+
+
+#endif
diff --git a/include/asm-arm/arch-at91/irqs.h b/include/asm-arm/arch-at91/irqs.h
new file mode 100644
index 0000000..f041c98
--- /dev/null
+++ b/include/asm-arm/arch-at91/irqs.h
@@ -0,0 +1,44 @@
+/*
+ * include/asm-arm/arch-at91/irqs.h
+ *
+ *  Copyright (C) 2004 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_IRQS_H
+#define __ASM_ARCH_IRQS_H
+
+#include <asm/arch/at91_aic.h>
+
+#define NR_AIC_IRQS 32
+
+
+/*
+ * Acknowledge interrupt with AIC after interrupt has been handled.
+ *   (by kernel/irq.c)
+ */
+#define irq_finish(irq) do { at91_sys_write(AT91_AIC_EOICR, 0); } while (0)
+
+
+/*
+ * IRQ interrupt symbols are the AT91xxx_ID_* symbols
+ * for IRQs handled directly through the AIC, or else the AT91_PIN_*
+ * symbols in gpio.h for ones handled indirectly as GPIOs.
+ * We make provision for 4 banks of GPIO.
+ */
+#define	NR_IRQS		(NR_AIC_IRQS + (4 * 32))
+
+#endif
diff --git a/include/asm-arm/arch-at91/memory.h b/include/asm-arm/arch-at91/memory.h
new file mode 100644
index 0000000..4835d67
--- /dev/null
+++ b/include/asm-arm/arch-at91/memory.h
@@ -0,0 +1,39 @@
+/*
+ * include/asm-arm/arch-at91/memory.h
+ *
+ *  Copyright (C) 2004 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_MEMORY_H
+#define __ASM_ARCH_MEMORY_H
+
+#include <asm/hardware.h>
+
+#define PHYS_OFFSET	(AT91_SDRAM_BASE)
+
+
+/*
+ * Virtual view <-> DMA view memory address translations
+ * virt_to_bus: Used to translate the virtual address to an
+ *              address suitable to be passed to set_dma_addr
+ * bus_to_virt: Used to convert an address for DMA operations
+ *              to an address that the kernel can use.
+ */
+#define __virt_to_bus(x) __virt_to_phys(x)
+#define __bus_to_virt(x) __phys_to_virt(x)
+
+#endif
diff --git a/include/asm-arm/arch-at91/system.h b/include/asm-arm/arch-at91/system.h
new file mode 100644
index 0000000..6bf8460
--- /dev/null
+++ b/include/asm-arm/arch-at91/system.h
@@ -0,0 +1,53 @@
+/*
+ * include/asm-arm/arch-at91/system.h
+ *
+ *  Copyright (C) 2003 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_SYSTEM_H
+#define __ASM_ARCH_SYSTEM_H
+
+#include <asm/hardware.h>
+#include <asm/arch/at91_st.h>
+#include <asm/arch/at91_dbgu.h>
+
+static inline void arch_idle(void)
+{
+	/*
+	 * Disable the processor clock.  The processor will be automatically
+	 * re-enabled by an interrupt or by a reset.
+	 */
+//	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
+
+	/*
+	 * Set the processor (CP15) into 'Wait for Interrupt' mode.
+	 * Unlike disabling the processor clock via the PMC (above)
+	 *  this allows the processor to be woken via JTAG.
+	 */
+	cpu_do_idle();
+}
+
+void (*at91_arch_reset)(void);
+
+static inline void arch_reset(char mode)
+{
+	/* call the CPU-specific reset function */
+	if (at91_arch_reset)
+		(at91_arch_reset)();
+}
+
+#endif
diff --git a/include/asm-arm/arch-at91/timex.h b/include/asm-arm/arch-at91/timex.h
new file mode 100644
index 0000000..b24e364
--- /dev/null
+++ b/include/asm-arm/arch-at91/timex.h
@@ -0,0 +1,37 @@
+/*
+ * include/asm-arm/arch-at91/timex.h
+ *
+ *  Copyright (C) 2003 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_TIMEX_H
+#define __ASM_ARCH_TIMEX_H
+
+#include <asm/hardware.h>
+
+#if defined(CONFIG_ARCH_AT91RM9200)
+
+#define CLOCK_TICK_RATE		(AT91_SLOW_CLOCK)
+
+#elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9261)
+
+#define AT91SAM9_MASTER_CLOCK	99300000
+#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
+
+#endif
+
+#endif
diff --git a/include/asm-arm/arch-at91/uncompress.h b/include/asm-arm/arch-at91/uncompress.h
new file mode 100644
index 0000000..a193d28
--- /dev/null
+++ b/include/asm-arm/arch-at91/uncompress.h
@@ -0,0 +1,56 @@
+/*
+ * include/asm-arm/arch-at91/uncompress.h
+ *
+ *  Copyright (C) 2003 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_UNCOMPRESS_H
+#define __ASM_ARCH_UNCOMPRESS_H
+
+#include <asm/hardware.h>
+#include <asm/arch/at91_dbgu.h>
+
+/*
+ * The following code assumes the serial port has already been
+ * initialized by the bootloader.  If you didn't setup a port in
+ * your bootloader then nothing will appear (which might be desired).
+ *
+ * This does not append a newline
+ */
+static void putc(int c)
+{
+	void __iomem *sys = (void __iomem *) AT91_BASE_SYS;	/* physical address */
+
+	while (!(__raw_readl(sys + AT91_DBGU_SR) & AT91_DBGU_TXRDY))
+		barrier();
+	__raw_writel(c, sys + AT91_DBGU_THR);
+}
+
+static inline void flush(void)
+{
+	void __iomem *sys = (void __iomem *) AT91_BASE_SYS;	/* physical address */
+
+	/* wait for transmission to complete */
+	while (!(__raw_readl(sys + AT91_DBGU_SR) & AT91_DBGU_TXEMPTY))
+		barrier();
+}
+
+#define arch_decomp_setup()
+
+#define arch_decomp_wdog()
+
+#endif
diff --git a/include/asm-arm/arch-at91/vmalloc.h b/include/asm-arm/arch-at91/vmalloc.h
new file mode 100644
index 0000000..bb05e70
--- /dev/null
+++ b/include/asm-arm/arch-at91/vmalloc.h
@@ -0,0 +1,26 @@
+/*
+ * include/asm-arm/arch-at91/vmalloc.h
+ *
+ *  Copyright (C) 2003 SAN People
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ */
+
+#ifndef __ASM_ARCH_VMALLOC_H
+#define __ASM_ARCH_VMALLOC_H
+
+#define VMALLOC_END		(AT91_VIRT_BASE & PGDIR_MASK)
+
+#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91_aic.h b/include/asm-arm/arch-at91rm9200/at91_aic.h
deleted file mode 100644
index 267e698..0000000
--- a/include/asm-arm/arch-at91rm9200/at91_aic.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91_aic.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Advanced Interrupt Controller (AIC) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_AIC_H
-#define AT91_AIC_H
-
-#define AT91_AIC_SMR(n)		(AT91_AIC + ((n) * 4))	/* Source Mode Registers 0-31 */
-#define		AT91_AIC_PRIOR		(7 << 0)		/* Priority Level */
-#define		AT91_AIC_SRCTYPE	(3 << 5)		/* Interrupt Source Type */
-#define			AT91_AIC_SRCTYPE_LOW		(0 << 5)
-#define			AT91_AIC_SRCTYPE_FALLING	(1 << 5)
-#define			AT91_AIC_SRCTYPE_HIGH		(2 << 5)
-#define			AT91_AIC_SRCTYPE_RISING		(3 << 5)
-
-#define AT91_AIC_SVR(n)		(AT91_AIC + 0x80 + ((n) * 4))	/* Source Vector Registers 0-31 */
-#define AT91_AIC_IVR		(AT91_AIC + 0x100)	/* Interrupt Vector Register */
-#define AT91_AIC_FVR		(AT91_AIC + 0x104)	/* Fast Interrupt Vector Register */
-#define AT91_AIC_ISR		(AT91_AIC + 0x108)	/* Interrupt Status Register */
-#define		AT91_AIC_IRQID		(0x1f << 0)		/* Current Interrupt Identifier */
-
-#define AT91_AIC_IPR		(AT91_AIC + 0x10c)	/* Interrupt Pending Register */
-#define AT91_AIC_IMR		(AT91_AIC + 0x110)	/* Interrupt Mask Register */
-#define AT91_AIC_CISR		(AT91_AIC + 0x114)	/* Core Interrupt Status Register */
-#define		AT91_AIC_NFIQ		(1 << 0)		/* nFIQ Status */
-#define		AT91_AIC_NIRQ		(1 << 1)		/* nIRQ Status */
-
-#define AT91_AIC_IECR		(AT91_AIC + 0x120)	/* Interrupt Enable Command Register */
-#define AT91_AIC_IDCR		(AT91_AIC + 0x124)	/* Interrupt Disable Command Register */
-#define AT91_AIC_ICCR		(AT91_AIC + 0x128)	/* Interrupt Clear Command Register */
-#define AT91_AIC_ISCR		(AT91_AIC + 0x12c)	/* Interrupt Set Command Register */
-#define AT91_AIC_EOICR		(AT91_AIC + 0x130)	/* End of Interrupt Command Register */
-#define AT91_AIC_SPU		(AT91_AIC + 0x134)	/* Spurious Interrupt Vector Register */
-#define AT91_AIC_DCR		(AT91_AIC + 0x138)	/* Debug Control Register */
-#define		AT91_AIC_DCR_PROT	(1 << 0)		/* Protection Mode */
-#define		AT91_AIC_DCR_GMSK	(1 << 1)		/* General Mask */
-
-#define AT91_AIC_FFER		(AT91_AIC + 0x140)	/* Fast Forcing Enable Register [SAM9 only] */
-#define AT91_AIC_FFDR		(AT91_AIC + 0x144)	/* Fast Forcing Disable Register [SAM9 only] */
-#define AT91_AIC_FFSR		(AT91_AIC + 0x148)	/* Fast Forcing Status Register [SAM9 only] */
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91_dbgu.h b/include/asm-arm/arch-at91rm9200/at91_dbgu.h
deleted file mode 100644
index e4b8b27..0000000
--- a/include/asm-arm/arch-at91rm9200/at91_dbgu.h
+++ /dev/null
@@ -1,45 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91_dbgu.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Debug Unit (DBGU) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_DBGU_H
-#define AT91_DBGU_H
-
-#define AT91_DBGU_CR		(AT91_DBGU + 0x00)	/* Control Register */
-#define AT91_DBGU_MR		(AT91_DBGU + 0x04)	/* Mode Register */
-#define AT91_DBGU_IER		(AT91_DBGU + 0x08)	/* Interrupt Enable Register */
-#define		AT91_DBGU_TXRDY		(1 << 1)		/* Transmitter Ready */
-#define		AT91_DBGU_TXEMPTY	(1 << 9)		/* Transmitter Empty */
-#define AT91_DBGU_IDR		(AT91_DBGU + 0x0c)	/* Interrupt Disable Register */
-#define AT91_DBGU_IMR		(AT91_DBGU + 0x10)	/* Interrupt Mask Register */
-#define AT91_DBGU_SR		(AT91_DBGU + 0x14)	/* Status Register */
-#define AT91_DBGU_RHR		(AT91_DBGU + 0x18)	/* Receiver Holding Register */
-#define AT91_DBGU_THR		(AT91_DBGU + 0x1c)	/* Transmitter Holding Register */
-#define AT91_DBGU_BRGR		(AT91_DBGU + 0x20)	/* Baud Rate Generator Register */
-
-#define AT91_DBGU_CIDR		(AT91_DBGU + 0x40)	/* Chip ID Register */
-#define AT91_DBGU_EXID		(AT91_DBGU + 0x44)	/* Chip ID Extension Register */
-#define		AT91_CIDR_VERSION	(0x1f << 0)		/* Version of the Device */
-#define		AT91_CIDR_EPROC		(7    << 5)		/* Embedded Processor */
-#define		AT91_CIDR_NVPSIZ	(0xf  << 8)		/* Nonvolatile Program Memory Size */
-#define		AT91_CIDR_NVPSIZ2	(0xf  << 12)		/* Second Nonvolatile Program Memory Size */
-#define		AT91_CIDR_SRAMSIZ	(0xf  << 16)		/* Internal SRAM Size */
-#define		AT91_CIDR_ARCH		(0xff << 20)		/* Architecture Identifier */
-#define		AT91_CIDR_NVPTYP	(7    << 28)		/* Nonvolatile Program Memory Type */
-#define		AT91_CIDR_EXT		(1    << 31)		/* Extension Flag */
-
-#define AT91_DBGU_FNR		(AT91_DBGU + 0x48)	/* Force NTRST Register [SAM9 only] */
-#define		AT91_DBGU_FNTRST	(1 << 0)		/* Force NTRST */
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91_ecc.h b/include/asm-arm/arch-at91rm9200/at91_ecc.h
deleted file mode 100644
index 5c564ed..0000000
--- a/include/asm-arm/arch-at91rm9200/at91_ecc.h
+++ /dev/null
@@ -1,38 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91_ecc.h
- *
- * Error Corrected Code Controller (ECC) - System peripherals regsters.
- * Based on AT91SAM9260 datasheet revision B.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef AT91_ECC_H
-#define AT91_ECC_H
-
-#define AT91_ECC_CR		(AT91_ECC + 0x00)	/* Control register */
-#define		AT91_ECC_RST		(1 << 0)		/* Reset parity */
-
-#define AT91_ECC_MR		(AT91_ECC + 0x04)	/* Mode register */
-#define		AT91_ECC_PAGESIZE	(3 << 0)		/* Page Size */
-#define			AT91_ECC_PAGESIZE_528		(0)
-#define			AT91_ECC_PAGESIZE_1056		(1)
-#define			AT91_ECC_PAGESIZE_2112		(2)
-#define			AT91_ECC_PAGESIZE_4224		(3)
-
-#define AT91_ECC_SR		(AT91_ECC + 0x08)	/* Status register */
-#define		AT91_ECC_RECERR		(1 << 0)		/* Recoverable Error */
-#define		AT91_ECC_ECCERR		(1 << 1)		/* ECC Single Bit Error */
-#define		AT91_ECC_MULERR		(1 << 2)		/* Multiple Errors */
-
-#define AT91_ECC_PR		(AT91_ECC + 0x0c)	/* Parity register */
-#define		AT91_ECC_BITADDR	(0xf << 0)		/* Bit Error Address */
-#define		AT91_ECC_WORDADDR	(0xfff << 4)		/* Word Error Address */
-
-#define AT91_ECC_NPR		(AT91_ECC + 0x10)	/* NParity register */
-#define		AT91_ECC_NPARITY	(0xffff << 0)		/* NParity */
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91_lcdc.h b/include/asm-arm/arch-at91rm9200/at91_lcdc.h
deleted file mode 100644
index 9cbfcdd..0000000
--- a/include/asm-arm/arch-at91rm9200/at91_lcdc.h
+++ /dev/null
@@ -1,148 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91_lcdc.h
- *
- * LCD Controller (LCDC).
- * Based on AT91SAM9261 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_LCDC_H
-#define AT91_LCDC_H
-
-#define AT91_LCDC_DMABADDR1	0x00		/* DMA Base Address Register 1 */
-#define AT91_LCDC_DMABADDR2	0x04		/* DMA Base Address Register 2 */
-#define AT91_LCDC_DMAFRMPT1	0x08		/* DMA Frame Pointer Register 1 */
-#define AT91_LCDC_DMAFRMPT2	0x0c		/* DMA Frame Pointer Register 2 */
-#define AT91_LCDC_DMAFRMADD1	0x10		/* DMA Frame Address Register 1 */
-#define AT91_LCDC_DMAFRMADD2	0x14		/* DMA Frame Address Register 2 */
-
-#define AT91_LCDC_DMAFRMCFG	0x18		/* DMA Frame Configuration Register */
-#define		AT91_LCDC_FRSIZE	(0x7fffff <<  0)	/* Frame Size */
-#define		AT91_LCDC_BLENGTH	(0x7f     << 24)	/* Burst Length */
-
-#define AT91_LCDC_DMACON	0x1c		/* DMA Control Register */
-#define		AT91_LCDC_DMAEN		(0x1 << 0)	/* DMA Enable */
-#define		AT91_LCDC_DMARST	(0x1 << 1)	/* DMA Reset */
-#define		AT91_LCDC_DMABUSY	(0x1 << 2)	/* DMA Busy */
-
-#define AT91_LCDC_LCDCON1	0x0800		/* LCD Control Register 1 */
-#define		AT91_LCDC_BYPASS	(1     <<  0)	/* Bypass lcd_dotck divider */
-#define		AT91_LCDC_CLKVAL	(0x1ff << 12)	/* Clock Divider */
-#define		AT91_LCDC_LINCNT	(0x7ff << 21)	/* Line Counter */
-
-#define AT91_LCDC_LCDCON2	0x0804		/* LCD Control Register 2 */
-#define		AT91_LCDC_DISTYPE	(3 << 0)	/* Display Type */
-#define			AT91_LCDC_DISTYPE_STNMONO	(0 << 0)
-#define			AT91_LCDC_DISTYPE_STNCOLOR	(1 << 0)
-#define			AT91_LCDC_DISTYPE_TFT		(2 << 0)
-#define		AT91_LCDC_SCANMOD	(1 << 2)	/* Scan Mode */
-#define			AT91_LCDC_SCANMOD_SINGLE	(0 << 2)
-#define			AT91_LCDC_SCANMOD_DUAL		(1 << 2)
-#define		AT91_LCDC_IFWIDTH	(3 << 3)	/*Interface Width */
-#define			AT91_LCDC_IFWIDTH_4		(0 << 3)
-#define			AT91_LCDC_IFWIDTH_8		(1 << 3)
-#define			AT91_LCDC_IFWIDTH_16		(2 << 3)
-#define		AT91_LCDC_PIXELSIZE	(7 << 5)	/* Bits per pixel */
-#define			AT91_LCDC_PIXELSIZE_1		(0 << 5)
-#define			AT91_LCDC_PIXELSIZE_2		(1 << 5)
-#define			AT91_LCDC_PIXELSIZE_4		(2 << 5)
-#define			AT91_LCDC_PIXELSIZE_8		(3 << 5)
-#define			AT91_LCDC_PIXELSIZE_16		(4 << 5)
-#define			AT91_LCDC_PIXELSIZE_24		(5 << 5)
-#define		AT91_LCDC_INVVD		(1 << 8)	/* LCD Data polarity */
-#define			AT91_LCDC_INVVD_NORMAL		(0 << 8)
-#define			AT91_LCDC_INVVD_INVERTED	(1 << 8)
-#define		AT91_LCDC_INVFRAME	(1 << 9 )	/* LCD VSync polarity */
-#define			AT91_LCDC_INVFRAME_NORMAL	(0 << 9)
-#define			AT91_LCDC_INVFRAME_INVERTED	(1 << 9)
-#define		AT91_LCDC_INVLINE	(1 << 10)	/* LCD HSync polarity */
-#define			AT91_LCDC_INVLINE_NORMAL	(0 << 10)
-#define			AT91_LCDC_INVLINE_INVERTED	(1 << 10)
-#define		AT91_LCDC_INVCLK	(1 << 11)	/* LCD dotclk polarity */
-#define			AT91_LCDC_INVCLK_NORMAL		(0 << 11)
-#define			AT91_LCDC_INVCLK_INVERTED	(1 << 11)
-#define		AT91_LCDC_INVDVAL	(1 << 12)	/* LCD dval polarity */
-#define			AT91_LCDC_INVDVAL_NORMAL	(0 << 12)
-#define			AT91_LCDC_INVDVAL_INVERTED	(1 << 12)
-#define		AT91_LCDC_CLKMOD	(1 << 15)	/* LCD dotclk mode */
-#define			AT91_LCDC_CLKMOD_ACTIVEDISPLAY	(0 << 15)
-#define			AT91_LCDC_CLKMOD_ALWAYSACTIVE	(1 << 15)
-#define		AT91_LCDC_MEMOR		(1 << 31)	/* Memory Ordering Format */
-#define			AT91_LCDC_MEMOR_BIG		(0 << 31)
-#define			AT91_LCDC_MEMOR_LITTLE		(1 << 31)
-
-#define AT91_LCDC_TIM1		0x0808		/* LCD Timing Register 1 */
-#define		AT91_LCDC_VFP		(0xff <<  0)	/* Vertical Front Porch */
-#define		AT91_LCDC_VBP		(0xff <<  8)	/* Vertical Back Porch */
-#define		AT91_LCDC_VPW		(0x3f << 16)	/* Vertical Synchronization Pulse Width */
-#define		AT91_LCDC_VHDLY		(0xf  << 24)	/* Vertical to Horizontal Delay */
-
-#define AT91_LCDC_TIM2		0x080c		/* LCD Timing Register 2 */
-#define		AT91_LCDC_HBP		(0xff  <<  0)	/* Horizontal Back Porch */
-#define		AT91_LCDC_HPW		(0x3f  <<  8)	/* Horizontal Synchronization Pulse Width */
-#define		AT91_LCDC_HFP		(0x7ff << 21)	/* Horizontal Front Porch */
-
-#define AT91_LCDC_LCDFRMCFG	0x0810		/* LCD Frame Configuration Register */
-#define		AT91_LCDC_LINEVAL	(0x7ff <<  0)	/* Vertical Size of LCD Module */
-#define		AT91_LCDC_HOZVAL	(0x7ff << 21)	/* Horizontal Size of LCD Module */
-
-#define AT91_LCDC_FIFO		0x0814		/* LCD FIFO Register */
-#define		AT91_LCDC_FIFOTH	(0xffff)	/* FIFO Threshold */
-
-#define AT91_LCDC_DP1_2		0x081c		/* Dithering Pattern DP1_2 Register */
-#define AT91_LCDC_DP4_7		0x0820		/* Dithering Pattern DP4_7 Register */
-#define AT91_LCDC_DP3_5		0x0824		/* Dithering Pattern DP3_5 Register */
-#define AT91_LCDC_DP2_3		0x0828		/* Dithering Pattern DP2_3 Register */
-#define AT91_LCDC_DP5_7		0x082c		/* Dithering Pattern DP5_7 Register */
-#define AT91_LCDC_DP3_4		0x0830		/* Dithering Pattern DP3_4 Register */
-#define AT91_LCDC_DP4_5		0x0834		/* Dithering Pattern DP4_5 Register */
-#define AT91_LCDC_DP6_7		0x0838		/* Dithering Pattern DP6_7 Register */
-#define		AT91_LCDC_DP1_2_VAL	(0xff)
-#define		AT91_LCDC_DP4_7_VAL	(0xfffffff)
-#define		AT91_LCDC_DP3_5_VAL	(0xfffff)
-#define		AT91_LCDC_DP2_3_VAL	(0xfff)
-#define		AT91_LCDC_DP5_7_VAL	(0xfffffff)
-#define		AT91_LCDC_DP3_4_VAL	(0xffff)
-#define		AT91_LCDC_DP4_5_VAL	(0xfffff)
-#define		AT91_LCDC_DP6_7_VAL	(0xfffffff)
-
-#define AT91_LCDC_PWRCON	0x083c		/* Power Control Register */
-#define		AT91_LCDC_PWR		(1    <<  0)	/* LCD Module Power Control */
-#define		AT91_LCDC_GUARDT	(0x7f <<  1)	/* Delay in Frame Period */
-#define		AT91_LCDC_BUSY		(1    << 31)	/* LCD Busy */
-
-#define AT91_LCDC_CONTRAST_CTR	0x0840		/* Contrast Control Register */
-#define		AT91_LCDC_PS		(3 << 0)	/* Contrast Counter Prescaler */
-#define			AT91_LCDC_PS_DIV1		(0 << 0)
-#define			AT91_LCDC_PS_DIV2		(1 << 0)
-#define			AT91_LCDC_PS_DIV4		(2 << 0)
-#define			AT91_LCDC_PS_DIV8		(3 << 0)
-#define		AT91_LCDC_POL		(1 << 2)	/* Polarity of output Pulse */
-#define			AT91_LCDC_POL_NEGATIVE		(0 << 2)
-#define			AT91_LCDC_POL_POSITIVE		(1 << 2)
-#define		AT91_LCDC_ENA		(1 << 3)	/* PWM generator Control */
-#define			AT91_LCDC_ENA_PWMDISABLE	(0 << 3)
-#define			AT91_LCDC_ENA_PWMENABLE		(1 << 3)
-
-#define AT91_LCDC_CONTRAST_VAL	0x0844		/* Contrast Value Register */
-#define		AT91_LCDC_CVAL		(0xff)		/* PWM compare value */
-
-#define AT91_LCDC_IER		0x0848		/* Interrupt Enable Register */
-#define AT91_LCDC_IDR		0x084c		/* Interrupt Disable Register */
-#define AT91_LCDC_IMR		0x0850		/* Interrupt Mask Register */
-#define AT91_LCDC_ISR		0x0854		/* Interrupt Enable Register */
-#define AT91_LCDC_ICR		0x0858		/* Interrupt Clear Register */
-#define		AT91_LCDC_LNI		(1 << 0)	/* Line Interrupt */
-#define		AT91_LCDC_LSTLNI	(1 << 1)	/* Last Line Interrupt */
-#define		AT91_LCDC_EOFI		(1 << 2)	/* DMA End Of Frame Interrupt */
-#define		AT91_LCDC_UFLWI		(1 << 4)	/* FIFO Underflow Interrupt */
-#define		AT91_LCDC_OWRI		(1 << 5)	/* FIFO Overwrite Interrupt */
-#define		AT91_LCDC_MERI		(1 << 6)	/* DMA Memory Error Interrupt */
-
-#define AT91_LCDC_LUT_(n)	(0x0c00 + ((n)*4))	/* Palette Entry 0..255 */
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91_mci.h b/include/asm-arm/arch-at91rm9200/at91_mci.h
deleted file mode 100644
index 9a552cb..0000000
--- a/include/asm-arm/arch-at91rm9200/at91_mci.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91_mci.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * MultiMedia Card Interface (MCI) registers.
- * Based on AT91RM9200 datasheet revision F.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_MCI_H
-#define AT91_MCI_H
-
-#define AT91_MCI_CR		0x00		/* Control Register */
-#define		AT91_MCI_MCIEN		(1 <<  0)	/* Multi-Media Interface Enable */
-#define		AT91_MCI_MCIDIS		(1 <<  1)	/* Multi-Media Interface Disable */
-#define		AT91_MCI_PWSEN		(1 <<  2)	/* Power Save Mode Enable */
-#define		AT91_MCI_PWSDIS		(1 <<  3)	/* Power Save Mode Disable */
-#define		AT91_MCI_SWRST		(1 <<  7)	/* Software Reset */
-
-#define AT91_MCI_MR		0x04		/* Mode Register */
-#define		AT91_MCI_CLKDIV		(0xff  <<  0)	/* Clock Divider */
-#define		AT91_MCI_PWSDIV		(7     <<  8)	/* Power Saving Divider */
-#define		AT91_MCI_PDCPADV	(1     << 14)	/* PDC Padding Value */
-#define		AT91_MCI_PDCMODE	(1     << 15)	/* PDC-orientated Mode */
-#define		AT91_MCI_BLKLEN		(0xfff << 18)	/* Data Block Length */
-
-#define AT91_MCI_DTOR		0x08		/* Data Timeout Register */
-#define		AT91_MCI_DTOCYC		(0xf << 0)	/* Data Timeout Cycle Number */
-#define		AT91_MCI_DTOMUL		(7   << 4)	/* Data Timeout Multiplier */
-#define		AT91_MCI_DTOMUL_1		(0 <<  4)
-#define		AT91_MCI_DTOMUL_16		(1 <<  4)
-#define		AT91_MCI_DTOMUL_128		(2 <<  4)
-#define		AT91_MCI_DTOMUL_256		(3 <<  4)
-#define		AT91_MCI_DTOMUL_1K		(4 <<  4)
-#define		AT91_MCI_DTOMUL_4K		(5 <<  4)
-#define		AT91_MCI_DTOMUL_64K		(6 <<  4)
-#define		AT91_MCI_DTOMUL_1M		(7 <<  4)
-
-#define AT91_MCI_SDCR		0x0c		/* SD Card Register */
-#define		AT91_MCI_SDCSEL		(3 << 0)	/* SD Card Selector */
-#define		AT91_MCI_SDCBUS		(1 << 7)	/* 1-bit or 4-bit bus */
-
-#define AT91_MCI_ARGR		0x10		/* Argument Register */
-
-#define AT91_MCI_CMDR		0x14		/* Command Register */
-#define		AT91_MCI_CMDNB		(0x3f << 0)	/* Command Number */
-#define		AT91_MCI_RSPTYP		(3    << 6)	/* Response Type */
-#define			AT91_MCI_RSPTYP_NONE	(0 <<  6)
-#define			AT91_MCI_RSPTYP_48	(1 <<  6)
-#define			AT91_MCI_RSPTYP_136	(2 <<  6)
-#define		AT91_MCI_SPCMD		(7    << 8)	/* Special Command */
-#define			AT91_MCI_SPCMD_NONE	(0 <<  8)
-#define			AT91_MCI_SPCMD_INIT	(1 <<  8)
-#define			AT91_MCI_SPCMD_SYNC	(2 <<  8)
-#define			AT91_MCI_SPCMD_ICMD	(4 <<  8)
-#define			AT91_MCI_SPCMD_IRESP	(5 <<  8)
-#define		AT91_MCI_OPDCMD		(1 << 11)	/* Open Drain Command */
-#define		AT91_MCI_MAXLAT		(1 << 12)	/* Max Latency for Command to Response */
-#define		AT91_MCI_TRCMD		(3 << 16)	/* Transfer Command */
-#define			AT91_MCI_TRCMD_NONE	(0 << 16)
-#define			AT91_MCI_TRCMD_START	(1 << 16)
-#define			AT91_MCI_TRCMD_STOP	(2 << 16)
-#define		AT91_MCI_TRDIR		(1 << 18)	/* Transfer Direction */
-#define		AT91_MCI_TRTYP		(3 << 19)	/* Transfer Type */
-#define			AT91_MCI_TRTYP_BLOCK	(0 << 19)
-#define			AT91_MCI_TRTYP_MULTIPLE	(1 << 19)
-#define			AT91_MCI_TRTYP_STREAM	(2 << 19)
-
-#define AT91_MCI_RSPR(n)	(0x20 + ((n) * 4))	/* Response Registers 0-3 */
-#define AT91_MCR_RDR		0x30		/* Receive Data Register */
-#define AT91_MCR_TDR		0x34		/* Transmit Data Register */
-
-#define AT91_MCI_SR		0x40		/* Status Register */
-#define		AT91_MCI_CMDRDY		(1 <<  0)	/* Command Ready */
-#define		AT91_MCI_RXRDY		(1 <<  1)	/* Receiver Ready */
-#define		AT91_MCI_TXRDY		(1 <<  2)	/* Transmit Ready */
-#define		AT91_MCI_BLKE		(1 <<  3)	/* Data Block Ended */
-#define		AT91_MCI_DTIP		(1 <<  4)	/* Data Transfer in Progress */
-#define		AT91_MCI_NOTBUSY	(1 <<  5)	/* Data Not Busy */
-#define		AT91_MCI_ENDRX		(1 <<  6)	/* End of RX Buffer */
-#define		AT91_MCI_ENDTX		(1 <<  7)	/* End fo TX Buffer */
-#define		AT91_MCI_SDIOIRQA	(1 <<  8)	/* SDIO Interrupt for Slot A */
-#define		At91_MCI_SDIOIRQB	(1 <<  9)	/* SDIO Interrupt for Slot B [AT91RM9200 only] */
-#define		AT91_MCI_RXBUFF		(1 << 14)	/* RX Buffer Full */
-#define		AT91_MCI_TXBUFE		(1 << 15)	/* TX Buffer Empty */
-#define		AT91_MCI_RINDE		(1 << 16)	/* Response Index Error */
-#define		AT91_MCI_RDIRE		(1 << 17)	/* Response Direction Error */
-#define		AT91_MCI_RCRCE		(1 << 18)	/* Response CRC Error */
-#define		AT91_MCI_RENDE		(1 << 19)	/* Response End Bit Error */
-#define		AT91_MCI_RTOE		(1 << 20)	/* Reponse Time-out Error */
-#define		AT91_MCI_DCRCE		(1 << 21)	/* Data CRC Error */
-#define		AT91_MCI_DTOE		(1 << 22)	/* Data Time-out Error */
-#define		AT91_MCI_OVRE		(1 << 30)	/* Overrun */
-#define		AT91_MCI_UNRE		(1 << 31)	/* Underrun */
-
-#define AT91_MCI_IER		0x44		/* Interrupt Enable Register */
-#define AT91_MCI_IDR		0x48		/* Interrupt Disable Register */
-#define AT91_MCI_IMR		0x4c		/* Interrupt Mask Register */
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91_pdc.h b/include/asm-arm/arch-at91rm9200/at91_pdc.h
deleted file mode 100644
index 79d6e02..0000000
--- a/include/asm-arm/arch-at91rm9200/at91_pdc.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91_pdc.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Peripheral Data Controller (PDC) registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_PDC_H
-#define AT91_PDC_H
-
-#define AT91_PDC_RPR		0x100	/* Receive Pointer Register */
-#define AT91_PDC_RCR		0x104	/* Receive Counter Register */
-#define AT91_PDC_TPR		0x108	/* Transmit Pointer Register */
-#define AT91_PDC_TCR		0x10c	/* Transmit Counter Register */
-#define AT91_PDC_RNPR		0x110	/* Receive Next Pointer Register */
-#define AT91_PDC_RNCR		0x114	/* Receive Next Counter Register */
-#define AT91_PDC_TNPR		0x118	/* Transmit Next Pointer Register */
-#define AT91_PDC_TNCR		0x11c	/* Transmit Next Counter Register */
-
-#define AT91_PDC_PTCR		0x120	/* Transfer Control Register */
-#define		AT91_PDC_RXTEN		(1 << 0)	/* Receiver Transfer Enable */
-#define		AT91_PDC_RXTDIS		(1 << 1)	/* Receiver Transfer Disable */
-#define		AT91_PDC_TXTEN		(1 << 8)	/* Transmitter Transfer Enable */
-#define		AT91_PDC_TXTDIS		(1 << 9)	/* Transmitter Transfer Disable */
-
-#define AT91_PDC_PTSR		0x124	/* Transfer Status Register */
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91_pio.h b/include/asm-arm/arch-at91rm9200/at91_pio.h
deleted file mode 100644
index 680eaa1..0000000
--- a/include/asm-arm/arch-at91rm9200/at91_pio.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91_pio.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Parallel I/O Controller (PIO) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_PIO_H
-#define AT91_PIO_H
-
-#define PIO_PER		0x00	/* Enable Register */
-#define PIO_PDR		0x04	/* Disable Register */
-#define PIO_PSR		0x08	/* Status Register */
-#define PIO_OER		0x10	/* Output Enable Register */
-#define PIO_ODR		0x14	/* Output Disable Register */
-#define PIO_OSR		0x18	/* Output Status Register */
-#define PIO_IFER	0x20	/* Glitch Input Filter Enable */
-#define PIO_IFDR	0x24	/* Glitch Input Filter Disable */
-#define PIO_IFSR	0x28	/* Glitch Input Filter Status */
-#define PIO_SODR	0x30	/* Set Output Data Register */
-#define PIO_CODR	0x34	/* Clear Output Data Register */
-#define PIO_ODSR	0x38	/* Output Data Status Register */
-#define PIO_PDSR	0x3c	/* Pin Data Status Register */
-#define PIO_IER		0x40	/* Interrupt Enable Register */
-#define PIO_IDR		0x44	/* Interrupt Disable Register */
-#define PIO_IMR		0x48	/* Interrupt Mask Register */
-#define PIO_ISR		0x4c	/* Interrupt Status Register */
-#define PIO_MDER	0x50	/* Multi-driver Enable Register */
-#define PIO_MDDR	0x54	/* Multi-driver Disable Register */
-#define PIO_MDSR	0x58	/* Multi-driver Status Register */
-#define PIO_PUDR	0x60	/* Pull-up Disable Register */
-#define PIO_PUER	0x64	/* Pull-up Enable Register */
-#define PIO_PUSR	0x68	/* Pull-up Status Register */
-#define PIO_ASR		0x70	/* Peripheral A Select Register */
-#define PIO_BSR		0x74	/* Peripheral B Select Register */
-#define PIO_ABSR	0x78	/* AB Status Register */
-#define PIO_OWER	0xa0	/* Output Write Enable Register */
-#define PIO_OWDR	0xa4	/* Output Write Disable Register */
-#define PIO_OWSR	0xa8	/* Output Write Status Register */
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91_pit.h b/include/asm-arm/arch-at91rm9200/at91_pit.h
deleted file mode 100644
index 4a30d009..0000000
--- a/include/asm-arm/arch-at91rm9200/at91_pit.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91_pit.h
- *
- * Periodic Interval Timer (PIT) - System peripherals regsters.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_PIT_H
-#define AT91_PIT_H
-
-#define AT91_PIT_MR		(AT91_PIT + 0x00)	/* Mode Register */
-#define		AT91_PIT_PITIEN		(1 << 25)		/* Timer Interrupt Enable */
-#define		AT91_PIT_PITEN		(1 << 24)		/* Timer Enabled */
-#define		AT91_PIT_PIV		(0xfffff)		/* Periodic Interval Value */
-
-#define AT91_PIT_SR		(AT91_PIT + 0x04)	/* Status Register */
-#define		AT91_PIT_PITS		(1 << 0)		/* Timer Status */
-
-#define AT91_PIT_PIVR		(AT91_PIT + 0x08)	/* Periodic Interval Value Register */
-#define AT91_PIT_PIIR		(AT91_PIT + 0x0c)	/* Periodic Interval Image Register */
-#define		AT91_PIT_PICNT		(0xfff << 20)		/* Interval Counter */
-#define		AT91_PIT_CPIV		(0xfffff)		/* Inverval Value */
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91_pmc.h b/include/asm-arm/arch-at91rm9200/at91_pmc.h
deleted file mode 100644
index c3b489d..0000000
--- a/include/asm-arm/arch-at91rm9200/at91_pmc.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91_pmc.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Power Management Controller (PMC) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_PMC_H
-#define AT91_PMC_H
-
-#define	AT91_PMC_SCER		(AT91_PMC + 0x00)	/* System Clock Enable Register */
-#define	AT91_PMC_SCDR		(AT91_PMC + 0x04)	/* System Clock Disable Register */
-
-#define	AT91_PMC_SCSR		(AT91_PMC + 0x08)	/* System Clock Status Register */
-#define		AT91_PMC_PCK		(1 <<  0)		/* Processor Clock */
-#define		AT91RM9200_PMC_UDP	(1 <<  1)		/* USB Devcice Port Clock [AT91RM9200 only] */
-#define		AT91RM9200_PMC_MCKUDP	(1 <<  2)		/* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
-#define		AT91RM9200_PMC_UHP	(1 <<  4)		/* USB Host Port Clock [AT91RM9200 only] */
-#define		AT91SAM926x_PMC_UHP	(1 <<  6)		/* USB Host Port Clock [AT91SAM926x only] */
-#define		AT91SAM926x_PMC_UDP	(1 <<  7)		/* USB Devcice Port Clock [AT91SAM926x only] */
-#define		AT91_PMC_PCK0		(1 <<  8)		/* Programmable Clock 0 */
-#define		AT91_PMC_PCK1		(1 <<  9)		/* Programmable Clock 1 */
-#define		AT91_PMC_PCK2		(1 << 10)		/* Programmable Clock 2 */
-#define		AT91_PMC_PCK3		(1 << 11)		/* Programmable Clock 3 */
-#define		AT91_PMC_HCK0		(1 << 16)		/* AHB Clock (USB host) [AT91SAM9261 only] */
-#define		AT91_PMC_HCK1		(1 << 17)		/* AHB Clock (LCD) [AT91SAM9261 only] */
-
-#define	AT91_PMC_PCER		(AT91_PMC + 0x10)	/* Peripheral Clock Enable Register */
-#define	AT91_PMC_PCDR		(AT91_PMC + 0x14)	/* Peripheral Clock Disable Register */
-#define	AT91_PMC_PCSR		(AT91_PMC + 0x18)	/* Peripheral Clock Status Register */
-
-#define	AT91_CKGR_MOR		(AT91_PMC + 0x20)	/* Main Oscillator Register */
-#define		AT91_PMC_MOSCEN		(1    << 0)		/* Main Oscillator Enable */
-#define		AT91_PMC_OSCBYPASS	(1    << 1)		/* Oscillator Bypass [AT91SAM926x only] */
-#define		AT91_PMC_OSCOUNT	(0xff << 8)		/* Main Oscillator Start-up Time */
-
-#define	AT91_CKGR_MCFR		(AT91_PMC + 0x24)	/* Main Clock Frequency Register */
-#define		AT91_PMC_MAINF		(0xffff <<  0)		/* Main Clock Frequency */
-#define		AT91_PMC_MAINRDY	(1	<< 16)		/* Main Clock Ready */
-
-#define	AT91_CKGR_PLLAR		(AT91_PMC + 0x28)	/* PLL A Register */
-#define	AT91_CKGR_PLLBR		(AT91_PMC + 0x2c)	/* PLL B Register */
-#define		AT91_PMC_DIV		(0xff  <<  0)		/* Divider */
-#define		AT91_PMC_PLLCOUNT	(0x3f  <<  8)		/* PLL Counter */
-#define		AT91_PMC_OUT		(3     << 14)		/* PLL Clock Frequency Range */
-#define		AT91_PMC_MUL		(0x7ff << 16)		/* PLL Multiplier */
-#define		AT91_PMC_USB96M		(1     << 28)		/* Divider by 2 Enable (PLLB only) */
-
-#define	AT91_PMC_MCKR		(AT91_PMC + 0x30)	/* Master Clock Register */
-#define		AT91_PMC_CSS		(3 <<  0)		/* Master Clock Selection */
-#define			AT91_PMC_CSS_SLOW		(0 << 0)
-#define			AT91_PMC_CSS_MAIN		(1 << 0)
-#define			AT91_PMC_CSS_PLLA		(2 << 0)
-#define			AT91_PMC_CSS_PLLB		(3 << 0)
-#define		AT91_PMC_PRES		(7 <<  2)		/* Master Clock Prescaler */
-#define			AT91_PMC_PRES_1			(0 << 2)
-#define			AT91_PMC_PRES_2			(1 << 2)
-#define			AT91_PMC_PRES_4			(2 << 2)
-#define			AT91_PMC_PRES_8			(3 << 2)
-#define			AT91_PMC_PRES_16		(4 << 2)
-#define			AT91_PMC_PRES_32		(5 << 2)
-#define			AT91_PMC_PRES_64		(6 << 2)
-#define		AT91_PMC_MDIV		(3 <<  8)		/* Master Clock Division */
-#define			AT91_PMC_MDIV_1			(0 << 8)
-#define			AT91_PMC_MDIV_2			(1 << 8)
-#define			AT91_PMC_MDIV_3			(2 << 8)
-#define			AT91_PMC_MDIV_4			(3 << 8)
-
-#define	AT91_PMC_PCKR(n)	(AT91_PMC + 0x40 + ((n) * 4))	/* Programmable Clock 0-3 Registers */
-
-#define	AT91_PMC_IER		(AT91_PMC + 0x60)	/* Interrupt Enable Register */
-#define	AT91_PMC_IDR		(AT91_PMC + 0x64)	/* Interrupt Disable Register */
-#define	AT91_PMC_SR		(AT91_PMC + 0x68)	/* Status Register */
-#define		AT91_PMC_MOSCS		(1 <<  0)		/* MOSCS Flag */
-#define		AT91_PMC_LOCKA		(1 <<  1)		/* PLLA Lock */
-#define		AT91_PMC_LOCKB		(1 <<  2)		/* PLLB Lock */
-#define		AT91_PMC_MCKRDY		(1 <<  3)		/* Master Clock */
-#define		AT91_PMC_PCK0RDY	(1 <<  8)		/* Programmable Clock 0 */
-#define		AT91_PMC_PCK1RDY	(1 <<  9)		/* Programmable Clock 1 */
-#define		AT91_PMC_PCK2RDY	(1 << 10)		/* Programmable Clock 2 */
-#define		AT91_PMC_PCK3RDY	(1 << 11)		/* Programmable Clock 3 */
-#define	AT91_PMC_IMR		(AT91_PMC + 0x6c)	/* Interrupt Mask Register */
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91_rstc.h b/include/asm-arm/arch-at91rm9200/at91_rstc.h
deleted file mode 100644
index 237d3c4..0000000
--- a/include/asm-arm/arch-at91rm9200/at91_rstc.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91_rstc.h
- *
- * Reset Controller (RSTC) - System peripherals regsters.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_RSTC_H
-#define AT91_RSTC_H
-
-#define AT91_RSTC_CR		(AT91_RSTC + 0x00)	/* Reset Controller Control Register */
-#define		AT91_RSTC_PROCRST	(1 << 0)		/* Processor Reset */
-#define		AT91_RSTC_PERRST	(1 << 2)		/* Peripheral Reset */
-#define		AT91_RSTC_EXTRST	(1 << 3)		/* External Reset */
-#define		AT91_RSTC_KEY		(0xff << 24)		/* KEY Password */
-
-#define AT91_RSTC_SR		(AT91_RSTC + 0x04)	/* Reset Controller Status Register */
-#define		AT91_RSTC_URSTS		(1 << 0)		/* User Reset Status */
-#define		AT91_RSTC_RSTTYP	(7 << 8)		/* Reset Type */
-#define			AT91_RSTC_RSTTYP_GENERAL	(0 << 8)
-#define			AT91_RSTC_RSTTYP_WAKEUP		(1 << 8)
-#define			AT91_RSTC_RSTTYP_WATCHDOG	(2 << 8)
-#define			AT91_RSTC_RSTTYP_SOFTWARE	(3 << 8)
-#define			AT91_RSTC_RSTTYP_USER	(4 << 8)
-#define		AT91_RSTC_NRSTL		(1 << 16)		/* NRST Pin Level */
-#define		AT91_RSTC_SRCMP		(1 << 17)		/* Software Reset Command in Progress */
-
-#define AT91_RSTC_MR		(AT91_RSTC + 0x08)	/* Reset Controller Mode Register */
-#define		AT91_RSTC_URSTEN	(1 << 0)		/* User Reset Enable */
-#define		AT91_RSTC_URSTIEN	(1 << 4)		/* User Reset Interrupt Enable */
-#define		AT91_RSTC_ERSTL		(0xf << 8)		/* External Reset Length */
-#define		AT91_RSTC_KEY		(0xff << 24)		/* KEY Password */
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91_rtc.h b/include/asm-arm/arch-at91rm9200/at91_rtc.h
deleted file mode 100644
index 095fe08..0000000
--- a/include/asm-arm/arch-at91rm9200/at91_rtc.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91_rtc.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Real Time Clock (RTC) - System peripheral registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_RTC_H
-#define AT91_RTC_H
-
-#define	AT91_RTC_CR		(AT91_RTC + 0x00)	/* Control Register */
-#define		AT91_RTC_UPDTIM		(1 <<  0)		/* Update Request Time Register */
-#define		AT91_RTC_UPDCAL		(1 <<  1)		/* Update Request Calendar Register */
-#define		AT91_RTC_TIMEVSEL	(3 <<  8)		/* Time Event Selection */
-#define			AT91_RTC_TIMEVSEL_MINUTE	(0 << 8)
-#define			AT91_RTC_TIMEVSEL_HOUR		(1 << 8)
-#define			AT91_RTC_TIMEVSEL_DAY24		(2 << 8)
-#define			AT91_RTC_TIMEVSEL_DAY12		(3 << 8)
-#define		AT91_RTC_CALEVSEL	(3 << 16)		/* Calendar Event Selection */
-#define			AT91_RTC_CALEVSEL_WEEK		(0 << 16)
-#define			AT91_RTC_CALEVSEL_MONTH		(1 << 16)
-#define			AT91_RTC_CALEVSEL_YEAR		(2 << 16)
-
-#define	AT91_RTC_MR		(AT91_RTC + 0x04)	/* Mode Register */
-#define			AT91_RTC_HRMOD		(1 <<  0)		/* 12/24 Hour Mode */
-
-#define	AT91_RTC_TIMR		(AT91_RTC + 0x08)	/* Time Register */
-#define		AT91_RTC_SEC		(0x7f <<  0)		/* Current Second */
-#define		AT91_RTC_MIN		(0x7f <<  8)		/* Current Minute */
-#define		AT91_RTC_HOUR		(0x3f << 16)		/* Current Hour */
-#define		AT91_RTC_AMPM		(1    << 22)		/* Ante Meridiem Post Meridiem Indicator */
-
-#define	AT91_RTC_CALR		(AT91_RTC + 0x0c)	/* Calendar Register */
-#define		AT91_RTC_CENT		(0x7f <<  0)		/* Current Century */
-#define		AT91_RTC_YEAR		(0xff <<  8)		/* Current Year */
-#define		AT91_RTC_MONTH		(0x1f << 16)		/* Current Month */
-#define		AT91_RTC_DAY		(7    << 21)		/* Current Day */
-#define		AT91_RTC_DATE		(0x3f << 24)		/* Current Date */
-
-#define	AT91_RTC_TIMALR		(AT91_RTC + 0x10)	/* Time Alarm Register */
-#define		AT91_RTC_SECEN		(1 <<  7)		/* Second Alarm Enable */
-#define		AT91_RTC_MINEN		(1 << 15)		/* Minute Alarm Enable */
-#define		AT91_RTC_HOUREN		(1 << 23)		/* Hour Alarm Enable */
-
-#define	AT91_RTC_CALALR		(AT91_RTC + 0x14)	/* Calendar Alarm Register */
-#define		AT91_RTC_MTHEN		(1 << 23)		/* Month Alarm Enable */
-#define		AT91_RTC_DATEEN		(1 << 31)		/* Date Alarm Enable */
-
-#define	AT91_RTC_SR		(AT91_RTC + 0x18)	/* Status Register */
-#define		AT91_RTC_ACKUPD		(1 <<  0)		/* Acknowledge for Update */
-#define		AT91_RTC_ALARM		(1 <<  1)		/* Alarm Flag */
-#define		AT91_RTC_SECEV		(1 <<  2)		/* Second Event */
-#define		AT91_RTC_TIMEV		(1 <<  3)		/* Time Event */
-#define		AT91_RTC_CALEV		(1 <<  4)		/* Calendar Event */
-
-#define	AT91_RTC_SCCR		(AT91_RTC + 0x1c)	/* Status Clear Command Register */
-#define	AT91_RTC_IER		(AT91_RTC + 0x20)	/* Interrupt Enable Register */
-#define	AT91_RTC_IDR		(AT91_RTC + 0x24)	/* Interrupt Disable Register */
-#define	AT91_RTC_IMR		(AT91_RTC + 0x28)	/* Interrupt Mask Register */
-
-#define	AT91_RTC_VER		(AT91_RTC + 0x2c)	/* Valid Entry Register */
-#define		AT91_RTC_NVTIM		(1 <<  0)		/* Non valid Time */
-#define		AT91_RTC_NVCAL		(1 <<  1)		/* Non valid Calendar */
-#define		AT91_RTC_NVTIMALR	(1 <<  2)		/* Non valid Time Alarm */
-#define		AT91_RTC_NVCALALR	(1 <<  3)		/* Non valid Calendar Alarm */
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91_rtt.h b/include/asm-arm/arch-at91rm9200/at91_rtt.h
deleted file mode 100644
index c6751ba..0000000
--- a/include/asm-arm/arch-at91rm9200/at91_rtt.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91_rtt.h
- *
- * Real-time Timer (RTT) - System peripherals regsters.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_RTT_H
-#define AT91_RTT_H
-
-#define AT91_RTT_MR		(AT91_RTT + 0x00)	/* Real-time Mode Register */
-#define		AT91_RTT_RTPRES		(0xffff << 0)		/* Real-time Timer Prescaler Value */
-#define		AT91_RTT_ALMIEN		(1 << 16)		/* Alarm Interrupt Enable */
-#define		AT91_RTT_RTTINCIEN	(1 << 17)		/* Real Time Timer Increment Interrupt Enable */
-#define		AT91_RTT_RTTRST		(1 << 18)		/* Real Time Timer Restart */
-
-#define AT91_RTT_AR		(AT91_RTT + 0x04)	/* Real-time Alarm Register */
-#define		AT91_RTT_ALMV		(0xffffffff)		/* Alarm Value */
-
-#define AT91_RTT_VR		(AT91_RTT + 0x08)	/* Real-time Value Register */
-#define		AT91_RTT_CRTV		(0xffffffff)		/* Current Real-time Value */
-
-#define AT91_RTT_SR		(AT91_RTT + 0x0c)	/* Real-time Status Register */
-#define		AT91_RTT_ALMS		(1 << 0)		/* Real-time Alarm Status */
-#define		AT91_RTT_RTTINC		(1 << 1)		/* Real-time Timer Increment */
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91_shdwc.h b/include/asm-arm/arch-at91rm9200/at91_shdwc.h
deleted file mode 100644
index 0439250..0000000
--- a/include/asm-arm/arch-at91rm9200/at91_shdwc.h
+++ /dev/null
@@ -1,33 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91_shdwc.h
- *
- * Shutdown Controller (SHDWC) - System peripherals regsters.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_SHDWC_H
-#define AT91_SHDWC_H
-
-#define AT91_SHDW_CR		(AT91_SHDWC + 0x00)	/* Shut Down Control Register */
-#define		AT91_SHDW_SHDW		(1    << 0)		/* Processor Reset */
-#define		AT91_SHDW_KEY		(0xff << 24)		/* KEY Password */
-
-#define AT91_SHDW_MR		(AT91_SHDWC + 0x04)	/* Shut Down Mode Register */
-#define		AT91_SHDW_WKMODE0	(3 << 0)		/* Wake-up 0 Mode Selection */
-#define			AT91_SHDW_WKMODE0_NONE		0
-#define			AT91_SHDW_WKMODE0_HIGH		1
-#define			AT91_SHDW_WKMODE0_LOW		2
-#define			AT91_SHDW_WKMODE0_ANYLEVEL	3
-#define		AT91_SHDW_CPTWK0	(0xf << 4)		/* Counter On Wake Up 0 */
-#define		AT91_SHDW_RTTWKEN	(1   << 16)		/* Real Time Timer Wake-up Enable */
-
-#define AT91_SHDW_SR		(AT91_SHDWC + 0x08)	/* Shut Down Status Register */
-#define		AT91_SHDW_WAKEUP0	(1 <<  0)		/* Wake-up 0 Status */
-#define		AT91_SHDW_RTTWK		(1 << 16)		/* Real-time Timer Wake-up */
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91_spi.h b/include/asm-arm/arch-at91rm9200/at91_spi.h
deleted file mode 100644
index bec48ca..0000000
--- a/include/asm-arm/arch-at91rm9200/at91_spi.h
+++ /dev/null
@@ -1,81 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91_spi.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Serial Peripheral Interface (SPI) registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_SPI_H
-#define AT91_SPI_H
-
-#define AT91_SPI_CR			0x00		/* Control Register */
-#define		AT91_SPI_SPIEN		(1 <<  0)		/* SPI Enable */
-#define		AT91_SPI_SPIDIS		(1 <<  1)		/* SPI Disable */
-#define		AT91_SPI_SWRST		(1 <<  7)		/* SPI Software Reset */
-#define		AT91_SPI_LASTXFER	(1 << 24)		/* Last Transfer [SAM9261 only] */
-
-#define AT91_SPI_MR			0x04		/* Mode Register */
-#define		AT91_SPI_MSTR		(1    <<  0)		/* Master/Slave Mode */
-#define		AT91_SPI_PS		(1    <<  1)		/* Peripheral Select */
-#define			AT91_SPI_PS_FIXED	(0 << 1)
-#define			AT91_SPI_PS_VARIABLE	(1 << 1)
-#define		AT91_SPI_PCSDEC		(1    <<  2)		/* Chip Select Decode */
-#define		AT91_SPI_DIV32		(1    <<  3)		/* Clock Selection [AT91RM9200 only] */
-#define		AT91_SPI_MODFDIS	(1    <<  4)		/* Mode Fault Detection */
-#define		AT91_SPI_LLB		(1    <<  7)		/* Local Loopback Enable */
-#define		AT91_SPI_PCS		(0xf  << 16)		/* Peripheral Chip Select */
-#define		AT91_SPI_DLYBCS		(0xff << 24)		/* Delay Between Chip Selects */
-
-#define AT91_SPI_RDR		0x08			/* Receive Data Register */
-#define		AT91_SPI_RD		(0xffff <<  0)		/* Receive Data */
-#define		AT91_SPI_PCS		(0xf	<< 16)		/* Peripheral Chip Select */
-
-#define AT91_SPI_TDR		0x0c			/* Transmit Data Register */
-#define		AT91_SPI_TD		(0xffff <<  0)		/* Transmit Data */
-#define		AT91_SPI_PCS		(0xf	<< 16)		/* Peripheral Chip Select */
-#define		AT91_SPI_LASTXFER	(1	<< 24)		/* Last Transfer [SAM9261 only] */
-
-#define AT91_SPI_SR		0x10			/* Status Register */
-#define		AT91_SPI_RDRF		(1 <<  0)		/* Receive Data Register Full */
-#define		AT91_SPI_TDRE		(1 <<  1)		/* Transmit Data Register Full */
-#define		AT91_SPI_MODF		(1 <<  2)		/* Mode Fault Error */
-#define		AT91_SPI_OVRES		(1 <<  3)		/* Overrun Error Status */
-#define		AT91_SPI_ENDRX		(1 <<  4)		/* End of RX buffer */
-#define		AT91_SPI_ENDTX		(1 <<  5)		/* End of TX buffer */
-#define		AT91_SPI_RXBUFF		(1 <<  6)		/* RX Buffer Full */
-#define		AT91_SPI_TXBUFE		(1 <<  7)		/* TX Buffer Empty */
-#define		AT91_SPI_NSSR		(1 <<  8)		/* NSS Rising [SAM9261 only] */
-#define		AT91_SPI_TXEMPTY	(1 <<  9)		/* Transmission Register Empty [SAM9261 only] */
-#define		AT91_SPI_SPIENS		(1 << 16)		/* SPI Enable Status */
-
-#define AT91_SPI_IER		0x14			/* Interrupt Enable Register */
-#define AT91_SPI_IDR		0x18			/* Interrupt Disable Register */
-#define AT91_SPI_IMR		0x1c			/* Interrupt Mask Register */
-
-#define AT91_SPI_CSR(n)		(0x30 + ((n) * 4))	/* Chip Select Registers 0-3 */
-#define		AT91_SPI_CPOL		(1    <<  0)		/* Clock Polarity */
-#define		AT91_SPI_NCPHA		(1    <<  1)		/* Clock Phase */
-#define		AT91_SPI_CSAAT		(1    <<  3)		/* Chip Select Active After Transfer [SAM9261 only] */
-#define		AT91_SPI_BITS		(0xf  <<  4)		/* Bits Per Transfer */
-#define			AT91_SPI_BITS_8		(0 << 4)
-#define			AT91_SPI_BITS_9		(1 << 4)
-#define			AT91_SPI_BITS_10	(2 << 4)
-#define			AT91_SPI_BITS_11	(3 << 4)
-#define			AT91_SPI_BITS_12	(4 << 4)
-#define			AT91_SPI_BITS_13	(5 << 4)
-#define			AT91_SPI_BITS_14	(6 << 4)
-#define			AT91_SPI_BITS_15	(7 << 4)
-#define			AT91_SPI_BITS_16	(8 << 4)
-#define		AT91_SPI_SCBR		(0xff <<  8)		/* Serial Clock Baud Rate */
-#define		AT91_SPI_DLYBS		(0xff << 16)		/* Delay before SPCK */
-#define		AT91_SPI_DLYBCT		(0xff << 24)		/* Delay between Consecutive Transfers */
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91_ssc.h b/include/asm-arm/arch-at91rm9200/at91_ssc.h
deleted file mode 100644
index 694bcaa..0000000
--- a/include/asm-arm/arch-at91rm9200/at91_ssc.h
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91_ssc.h
- *
- * Copyright (C) SAN People
- *
- * Serial Synchronous Controller (SSC) registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_SSC_H
-#define AT91_SSC_H
-
-#define AT91_SSC_CR		0x00	/* Control Register */
-#define		AT91_SSC_RXEN		(1 <<  0)	/* Receive Enable */
-#define		AT91_SSC_RXDIS		(1 <<  1)	/* Receive Disable */
-#define		AT91_SSC_TXEN		(1 <<  8)	/* Transmit Enable */
-#define		AT91_SSC_TXDIS		(1 <<  9)	/* Transmit Disable */
-#define		AT91_SSC_SWRST		(1 << 15)	/* Software Reset */
-
-#define AT91_SSC_CMR		0x04	/* Clock Mode Register */
-#define		AT91_SSC_CMR_DIV	(0xfff << 0)	/* Clock Divider */
-
-#define AT91_SSC_RCMR		0x10	/* Receive Clock Mode Register */
-#define		AT91_SSC_CKS		(3    <<  0)	/* Clock Selection */
-#define			AT91_SSC_CKS_DIV		(0 << 0)
-#define			AT91_SSC_CKS_CLOCK		(1 << 0)
-#define			AT91_SSC_CKS_PIN		(2 << 0)
-#define		AT91_SSC_CKO		(7    <<  2)	/* Clock Output Mode Selection */
-#define			AT91_SSC_CKO_NONE		(0 << 2)
-#define			AT91_SSC_CKO_CONTINUOUS		(1 << 2)
-#define		AT91_SSC_CKI		(1    <<  5)	/* Clock Inversion */
-#define			AT91_SSC_CKI_FALLING		(0 << 5)
-#define			AT91_SSC_CK_RISING		(1 << 5)
-#define		AT91_SSC_CKG		(1    <<  6)	/* Receive Clock Gating Selection [AT91SAM9261 only] */
-#define			AT91_SSC_CKG_NONE		(0 << 6)
-#define			AT91_SSC_CKG_RFLOW		(1 << 6)
-#define			AT91_SSC_CKG_RFHIGH		(2 << 6)
-#define		AT91_SSC_START		(0xf  <<  8)	/* Start Selection */
-#define			AT91_SSC_START_CONTINUOUS	(0 << 8)
-#define			AT91_SSC_START_TX_RX		(1 << 8)
-#define			AT91_SSC_START_LOW_RF		(2 << 8)
-#define			AT91_SSC_START_HIGH_RF		(3 << 8)
-#define			AT91_SSC_START_FALLING_RF	(4 << 8)
-#define			AT91_SSC_START_RISING_RF	(5 << 8)
-#define			AT91_SSC_START_LEVEL_RF		(6 << 8)
-#define			AT91_SSC_START_EDGE_RF		(7 << 8)
-#define		AT91_SSC_STOP		(1    << 12)	/* Receive Stop Selection [AT91SAM9261 only] */
-#define		AT91_SSC_STTDLY		(0xff << 16)	/* Start Delay */
-#define		AT91_SSC_PERIOD		(0xff << 24)	/* Period Divider Selection */
-
-#define AT91_SSC_RFMR		0x14	/* Receive Frame Mode Register */
-#define		AT91_SSC_DATALEN	(0x1f <<  0)	/* Data Length */
-#define		AT91_SSC_LOOP		(1    <<  5)	/* Loop Mode */
-#define		AT91_SSC_MSBF		(1    <<  7)	/* Most Significant Bit First */
-#define		AT91_SSC_DATNB		(0xf  <<  8)	/* Data Number per Frame */
-#define		AT91_SSC_FSLEN		(0xf  << 16)	/* Frame Sync Length */
-#define		AT91_SSC_FSOS		(7    << 20)	/* Frame Sync Output Selection */
-#define			AT91_SSC_FSOS_NONE		(0 << 20)
-#define			AT91_SSC_FSOS_NEGATIVE		(1 << 20)
-#define			AT91_SSC_FSOS_POSITIVE		(2 << 20)
-#define			AT91_SSC_FSOS_LOW		(3 << 20)
-#define			AT91_SSC_FSOS_HIGH		(4 << 20)
-#define			AT91_SSC_FSOS_TOGGLE		(5 << 20)
-#define		AT91_SSC_FSEDGE		(1    << 24)	/* Frame Sync Edge Detection */
-#define			AT91_SSC_FSEDGE_POSITIVE	(0 << 24)
-#define			AT91_SSC_FSEDGE_NEGATIVE	(1 << 24)
-
-#define AT91_SSC_TCMR		0x18	/* Transmit Clock Mode Register */
-#define AT91_SSC_TFMR		0x1c	/* Transmit Fram Mode Register */
-#define		AT91_SSC_DATDEF		(1 <<  5)	/* Data Default Value */
-#define		AT91_SSC_FSDEN		(1 << 23)	/* Frame Sync Data Enable */
-
-#define AT91_SSC_RHR		0x20	/* Receive Holding Register */
-#define AT91_SSC_THR		0x24	/* Transmit Holding Register */
-#define AT91_SSC_RSHR		0x30	/* Receive Sync Holding Register */
-#define AT91_SSC_TSHR		0x34	/* Transmit Sync Holding Register */
-
-#define AT91_SSC_RC0R		0x38	/* Receive Compare 0 Register [AT91SAM9261 only] */
-#define AT91_SSC_RC1R		0x3c	/* Receive Compare 1 Register [AT91SAM9261 only] */
-
-#define AT91_SSC_SR		0x40	/* Status Register */
-#define		AT91_SSC_TXRDY		(1 <<  0)	/* Transmit Ready */
-#define		AT91_SSC_TXEMPTY	(1 <<  1)	/* Transmit Empty */
-#define		AT91_SSC_ENDTX		(1 <<  2)	/* End of Transmission */
-#define		AT91_SSC_TXBUFE		(1 <<  3)	/* Transmit Buffer Empty */
-#define		AT91_SSC_RXRDY		(1 <<  4)	/* Receive Ready */
-#define		AT91_SSC_OVRUN		(1 <<  5)	/* Receive Overrun */
-#define		AT91_SSC_ENDRX		(1 <<  6)	/* End of Reception */
-#define		AT91_SSC_RXBUFF		(1 <<  7)	/* Receive Buffer Full */
-#define		AT91_SSC_CP0		(1 <<  8)	/* Compare 0 [AT91SAM9261 only] */
-#define		AT91_SSC_CP1		(1 <<  9)	/* Compare 1 [AT91SAM9261 only] */
-#define		AT91_SSC_TXSYN		(1 << 10)	/* Transmit Sync */
-#define		AT91_SSC_RXSYN		(1 << 11)	/* Receive Sync */
-#define		AT91_SSC_TXENA		(1 << 16)	/* Transmit Enable */
-#define		AT91_SSC_RXENA		(1 << 17)	/* Receive Enable */
-
-#define AT91_SSC_IER		0x44	/* Interrupt Enable Register */
-#define AT91_SSC_IDR		0x48	/* Interrupt Disable Register */
-#define AT91_SSC_IMR		0x4c	/* Interrupt Mask Register */
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91_st.h b/include/asm-arm/arch-at91rm9200/at91_st.h
deleted file mode 100644
index 2432ddf..0000000
--- a/include/asm-arm/arch-at91rm9200/at91_st.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91_st.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * System Timer (ST) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_ST_H
-#define AT91_ST_H
-
-#define	AT91_ST_CR		(AT91_ST + 0x00)	/* Control Register */
-#define 	AT91_ST_WDRST		(1 << 0)		/* Watchdog Timer Restart */
-
-#define	AT91_ST_PIMR		(AT91_ST + 0x04)	/* Period Interval Mode Register */
-#define		AT91_ST_PIV		(0xffff <<  0)		/* Period Interval Value */
-
-#define	AT91_ST_WDMR		(AT91_ST + 0x08)	/* Watchdog Mode Register */
-#define		AT91_ST_WDV		(0xffff <<  0)		/* Watchdog Counter Value */
-#define		AT91_ST_RSTEN		(1	<< 16)		/* Reset Enable */
-#define		AT91_ST_EXTEN		(1	<< 17)		/* External Signal Assertion Enable */
-
-#define	AT91_ST_RTMR		(AT91_ST + 0x0c)	/* Real-time Mode Register */
-#define		AT91_ST_RTPRES		(0xffff <<  0)		/* Real-time Prescalar Value */
-
-#define	AT91_ST_SR		(AT91_ST + 0x10)	/* Status Register */
-#define		AT91_ST_PITS		(1 << 0)		/* Period Interval Timer Status */
-#define		AT91_ST_WDOVF		(1 << 1) 		/* Watchdog Overflow */
-#define		AT91_ST_RTTINC		(1 << 2) 		/* Real-time Timer Increment */
-#define		AT91_ST_ALMS		(1 << 3) 		/* Alarm Status */
-
-#define	AT91_ST_IER		(AT91_ST + 0x14)	/* Interrupt Enable Register */
-#define	AT91_ST_IDR		(AT91_ST + 0x18)	/* Interrupt Disable Register */
-#define	AT91_ST_IMR		(AT91_ST + 0x1c)	/* Interrupt Mask Register */
-
-#define	AT91_ST_RTAR		(AT91_ST + 0x20)	/* Real-time Alarm Register */
-#define		AT91_ST_ALMV		(0xfffff << 0)		/* Alarm Value */
-
-#define	AT91_ST_CRTR		(AT91_ST + 0x24)	/* Current Real-time Register */
-#define		AT91_ST_CRTV		(0xfffff << 0)		/* Current Real-Time Value */
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91_tc.h b/include/asm-arm/arch-at91rm9200/at91_tc.h
deleted file mode 100644
index 8d06eb0..0000000
--- a/include/asm-arm/arch-at91rm9200/at91_tc.h
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91_tc.h
- *
- * Copyright (C) SAN People
- *
- * Timer/Counter Unit (TC) registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_TC_H
-#define AT91_TC_H
-
-#define AT91_TC_BCR		0xc0		/* TC Block Control Register */
-#define		AT91_TC_SYNC		(1 << 0)	/* Synchro Command */
-
-#define AT91_TC_BMR		0xc4		/* TC Block Mode Register */
-#define		AT91_TC_TC0XC0S		(3 << 0)	/* External Clock Signal 0 Selection */
-#define			AT91_TC_TC0XC0S_TCLK0		(0 << 0)
-#define			AT91_TC_TC0XC0S_NONE		(1 << 0)
-#define			AT91_TC_TC0XC0S_TIOA1		(2 << 0)
-#define			AT91_TC_TC0XC0S_TIOA2		(3 << 0)
-#define		AT91_TC_TC1XC1S		(3 << 2)	/* External Clock Signal 1 Selection */
-#define			AT91_TC_TC1XC1S_TCLK1		(0 << 2)
-#define			AT91_TC_TC1XC1S_NONE		(1 << 2)
-#define			AT91_TC_TC1XC1S_TIOA0		(2 << 2)
-#define			AT91_TC_TC1XC1S_TIOA2		(3 << 2)
-#define		AT91_TC_TC2XC2S		(3 << 4)	/* External Clock Signal 2 Selection */
-#define			AT91_TC_TC2XC2S_TCLK2		(0 << 4)
-#define			AT91_TC_TC2XC2S_NONE		(1 << 4)
-#define			AT91_TC_TC2XC2S_TIOA0		(2 << 4)
-#define			AT91_TC_TC2XC2S_TIOA1		(3 << 4)
-
-
-#define AT91_TC_CCR		0x00		/* Channel Control Register */
-#define		AT91_TC_CLKEN		(1 << 0)	/* Counter Clock Enable Command */
-#define		AT91_TC_CLKDIS		(1 << 1)	/* Counter CLock Disable Command */
-#define		AT91_TC_SWTRG		(1 << 2)	/* Software Trigger Command */
-
-#define AT91_TC_CMR		0x04		/* Channel Mode Register */
-#define		AT91_TC_TCCLKS		(7 << 0)	/* Capture/Waveform Mode: Clock Selection */
-#define			AT91_TC_TIMER_CLOCK1		(0 << 0)
-#define			AT91_TC_TIMER_CLOCK2		(1 << 0)
-#define			AT91_TC_TIMER_CLOCK3		(2 << 0)
-#define			AT91_TC_TIMER_CLOCK4		(3 << 0)
-#define			AT91_TC_TIMER_CLOCK5		(4 << 0)
-#define			AT91_TC_XC0			(5 << 0)
-#define			AT91_TC_XC1			(6 << 0)
-#define			AT91_TC_XC2			(7 << 0)
-#define		AT91_TC_CLKI		(1 << 3)	/* Capture/Waveform Mode: Clock Invert */
-#define		AT91_TC_BURST		(3 << 4)	/* Capture/Waveform Mode: Burst Signal Selection */
-#define		AT91_TC_LDBSTOP		(1 << 6)	/* Capture Mode: Counter Clock Stopped with TB Loading */
-#define		AT91_TC_LDBDIS		(1 << 7)	/* Capture Mode: Counter Clock Disable with RB Loading */
-#define		AT91_TC_ETRGEDG		(3 << 8)	/* Capture Mode: External Trigger Edge Selection */
-#define		AT91_TC_ABETRG		(1 << 10)	/* Capture Mode: TIOA or TIOB External Trigger Selection */
-#define		AT91_TC_CPCTRG		(1 << 14)	/* Capture Mode: RC Compare Trigger Enable */
-#define		AT91_TC_WAVE		(1 << 15)	/* Capture/Waveform mode */
-#define		AT91_TC_LDRA		(3 << 16)	/* Capture Mode: RA Loading Selection */
-#define		AT91_TC_LDRB		(3 << 18)	/* Capture Mode: RB Loading Selection */
-
-#define		AT91_TC_CPCSTOP		(1 <<  6)	/* Waveform Mode: Counter Clock Stopped with RC Compare */
-#define		AT91_TC_CPCDIS		(1 <<  7)	/* Waveform Mode: Counter Clock Disable with RC Compare */
-#define		AT91_TC_EEVTEDG		(3 <<  8)	/* Waveform Mode: External Event Edge Selection */
-#define			AT91_TC_EEVTEDG_NONE		(0 << 8)
-#define			AT91_TC_EEVTEDG_RISING		(1 << 8)
-#define			AT91_TC_EEVTEDG_FALLING		(2 << 8)
-#define			AT91_TC_EEVTEDG_BOTH		(3 << 8)
-#define		AT91_TC_EEVT		(3 << 10)	/* Waveform Mode: External Event Selection */
-#define			AT91_TC_EEVT_TIOB		(0 << 10)
-#define			AT91_TC_EEVT_XC0		(1 << 10)
-#define			AT91_TC_EEVT_XC1		(2 << 10)
-#define			AT91_TC_EEVT_XC2		(3 << 10)
-#define		AT91_TC_ENETRG		(1 << 12)	/* Waveform Mode: External Event Trigger Enable */
-#define		AT91_TC_WAVESEL		(3 << 13)	/* Waveform Mode: Waveform Selection */
-#define			AT91_TC_WAVESEL_UP		(0 << 13)
-#define			AT91_TC_WAVESEL_UP_AUTO		(2 << 13)
-#define			AT91_TC_WAVESEL_UPDOWN		(1 << 13)
-#define			AT91_TC_WAVESEL_UPDOWN_AUTO	(3 << 13)
-#define		AT91_TC_ACPA		(3 << 16)	/* Waveform Mode: RA Compare Effect on TIOA */
-#define			AT91_TC_ACPA_NONE		(0 << 16)
-#define			AT91_TC_ACPA_SET		(1 << 16)
-#define			AT91_TC_ACPA_CLEAR		(2 << 16)
-#define			AT91_TC_ACPA_TOGGLE		(3 << 16)
-#define		AT91_TC_ACPC		(3 << 18)	/* Waveform Mode: RC Compre Effect on TIOA */
-#define			AT91_TC_ACPC_NONE		(0 << 18)
-#define			AT91_TC_ACPC_SET		(1 << 18)
-#define			AT91_TC_ACPC_CLEAR		(2 << 18)
-#define			AT91_TC_ACPC_TOGGLE		(3 << 18)
-#define		AT91_TC_AEEVT		(3 << 20)	/* Waveform Mode: External Event Effect on TIOA */
-#define			AT91_TC_AEEVT_NONE		(0 << 20)
-#define			AT91_TC_AEEVT_SET		(1 << 20)
-#define			AT91_TC_AEEVT_CLEAR		(2 << 20)
-#define			AT91_TC_AEEVT_TOGGLE		(3 << 20)
-#define		AT91_TC_ASWTRG		(3 << 22)	/* Waveform Mode: Software Trigger Effect on TIOA */
-#define			AT91_TC_ASWTRG_NONE		(0 << 22)
-#define			AT91_TC_ASWTRG_SET		(1 << 22)
-#define			AT91_TC_ASWTRG_CLEAR		(2 << 22)
-#define			AT91_TC_ASWTRG_TOGGLE		(3 << 22)
-#define		AT91_TC_BCPB		(3 << 24)	/* Waveform Mode: RB Compare Effect on TIOB */
-#define			AT91_TC_BCPB_NONE		(0 << 24)
-#define			AT91_TC_BCPB_SET		(1 << 24)
-#define			AT91_TC_BCPB_CLEAR		(2 << 24)
-#define			AT91_TC_BCPB_TOGGLE		(3 << 24)
-#define		AT91_TC_BCPC		(3 << 26)	/* Waveform Mode: RC Compare Effect on TIOB */
-#define			AT91_TC_BCPC_NONE		(0 << 26)
-#define			AT91_TC_BCPC_SET		(1 << 26)
-#define			AT91_TC_BCPC_CLEAR		(2 << 26)
-#define			AT91_TC_BCPC_TOGGLE		(3 << 26)
-#define		AT91_TC_BEEVT		(3 << 28)	/* Waveform Mode: External Event Effect on TIOB */
-#define			AT91_TC_BEEVT_NONE		(0 << 28)
-#define			AT91_TC_BEEVT_SET		(1 << 28)
-#define			AT91_TC_BEEVT_CLEAR		(2 << 28)
-#define			AT91_TC_BEEVT_TOGGLE		(3 << 28)
-#define		AT91_TC_BSWTRG		(3 << 30)	/* Waveform Mode: Software Trigger Effect on TIOB */
-#define			AT91_TC_BSWTRG_NONE		(0 << 30)
-#define			AT91_TC_BSWTRG_SET		(1 << 30)
-#define			AT91_TC_BSWTRG_CLEAR		(2 << 30)
-#define			AT91_TC_BSWTRG_TOGGLE		(3 << 30)
-
-#define AT91_TC_CV		0x10		/* Counter Value */
-#define AT91_TC_RA		0x14		/* Register A */
-#define AT91_TC_RB		0x18		/* Register B */
-#define AT91_TC_RC		0x1c		/* Register C */
-
-#define AT91_TC_SR		0x20		/* Status Register */
-#define		AT91_TC_COVFS		(1 <<  0)	/* Counter Overflow Status */
-#define		AT91_TC_LOVRS		(1 <<  1)	/* Load Overrun Status */
-#define		AT91_TC_CPAS		(1 <<  2)	/* RA Compare Status */
-#define		AT91_TC_CPBS		(1 <<  3)	/* RB Compare Status */
-#define		AT91_TC_CPCS		(1 <<  4)	/* RC Compare Status */
-#define		AT91_TC_LDRAS		(1 <<  5)	/* RA Loading Status */
-#define		AT91_TC_LDRBS		(1 <<  6)	/* RB Loading Status */
-#define		AT91_TC_ETRGS		(1 <<  7)	/* External Trigger Status */
-#define		AT91_TC_CLKSTA		(1 << 16)	/* Clock Enabling Status */
-#define		AT91_TC_MTIOA		(1 << 17)	/* TIOA Mirror */
-#define		AT91_TC_MTIOB		(1 << 18)	/* TIOB Mirror */
-
-#define AT91_TC_IER		0x24		/* Interrupt Enable Register */
-#define AT91_TC_IDR		0x28		/* Interrupt Disable Register */
-#define AT91_TC_IMR		0x2c		/* Interrupt Mask Register */
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91_twi.h b/include/asm-arm/arch-at91rm9200/at91_twi.h
deleted file mode 100644
index cda914f..0000000
--- a/include/asm-arm/arch-at91rm9200/at91_twi.h
+++ /dev/null
@@ -1,57 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91_twi.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Two-wire Interface (TWI) registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_TWI_H
-#define AT91_TWI_H
-
-#define	AT91_TWI_CR		0x00		/* Control Register */
-#define		AT91_TWI_START		(1 <<  0)	/* Send a Start Condition */
-#define		AT91_TWI_STOP		(1 <<  1)	/* Send a Stop Condition */
-#define		AT91_TWI_MSEN		(1 <<  2)	/* Master Transfer Enable */
-#define		AT91_TWI_MSDIS		(1 <<  3)	/* Master Transfer Disable */
-#define		AT91_TWI_SWRST		(1 <<  7)	/* Software Reset */
-
-#define	AT91_TWI_MMR		0x04		/* Master Mode Register */
-#define		AT91_TWI_IADRSZ		(3    <<  8)	/* Internal Device Address Size */
-#define			AT91_TWI_IADRSZ_NO		(0 << 8)
-#define			AT91_TWI_IADRSZ_1		(1 << 8)
-#define			AT91_TWI_IADRSZ_2		(2 << 8)
-#define			AT91_TWI_IADRSZ_3		(3 << 8)
-#define		AT91_TWI_MREAD		(1    << 12)	/* Master Read Direction */
-#define		AT91_TWI_DADR		(0x7f << 16)	/* Device Address */
-
-#define	AT91_TWI_IADR		0x0c		/* Internal Address Register */
-
-#define	AT91_TWI_CWGR		0x10		/* Clock Waveform Generator Register */
-#define		AT91_TWI_CLDIV		(0xff <<  0)	/* Clock Low Divisor */
-#define		AT91_TWI_CHDIV		(0xff <<  8)	/* Clock High Divisor */
-#define		AT91_TWI_CKDIV		(7    << 16)	/* Clock Divider */
-
-#define	AT91_TWI_SR		0x20		/* Status Register */
-#define		AT91_TWI_TXCOMP		(1 <<  0)	/* Transmission Complete */
-#define		AT91_TWI_RXRDY		(1 <<  1)	/* Receive Holding Register Ready */
-#define		AT91_TWI_TXRDY		(1 <<  2)	/* Transmit Holding Register Ready */
-#define		AT91_TWI_OVRE		(1 <<  6)	/* Overrun Error [AT91RM9200 only] */
-#define		AT91_TWI_UNRE		(1 <<  7)	/* Underrun Error [AT91RM9200 only] */
-#define		AT91_TWI_NACK		(1 <<  8)	/* Not Acknowledged */
-
-#define	AT91_TWI_IER		0x24		/* Interrupt Enable Register */
-#define	AT91_TWI_IDR		0x28		/* Interrupt Disable Register */
-#define	AT91_TWI_IMR		0x2c		/* Interrupt Mask Register */
-#define	AT91_TWI_RHR		0x30		/* Receive Holding Register */
-#define	AT91_TWI_THR		0x34		/* Transmit Holding Register */
-
-#endif
-
diff --git a/include/asm-arm/arch-at91rm9200/at91_wdt.h b/include/asm-arm/arch-at91rm9200/at91_wdt.h
deleted file mode 100644
index ac63e77..0000000
--- a/include/asm-arm/arch-at91rm9200/at91_wdt.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91_wdt.h
- *
- * Watchdog Timer (WDT) - System peripherals regsters.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_WDT_H
-#define AT91_WDT_H
-
-#define AT91_WDT_CR		(AT91_WDT + 0x00)	/* Watchdog Control Register */
-#define		AT91_WDT_WDRSTT		(1    << 0)		/* Restart */
-#define		AT91_WDT_KEY		(0xff << 24)		/* KEY Password */
-
-#define AT91_WDT_MR		(AT91_WDT + 0x04)	/* Watchdog Mode Register */
-#define		AT91_WDT_WDV		(0xfff << 0)		/* Counter Value */
-#define		AT91_WDT_WDFIEN		(1     << 12)		/* Fault Interrupt Enable */
-#define		AT91_WDT_WDRSTEN	(1     << 13)		/* Reset Processor */
-#define		AT91_WDT_WDRPROC	(1     << 14)		/* Timer Restart */
-#define		AT91_WDT_WDDIS		(1     << 15)		/* Watchdog Disable */
-#define		AT91_WDT_WDD		(0xfff << 16)		/* Delta Value */
-#define		AT91_WDT_WDDBGHLT	(1     << 28)		/* Debug Halt */
-#define		AT91_WDT_WDIDLEHLT	(1     << 29)		/* Idle Halt */
-
-#define AT91_WDT_SR		(AT91_WDT + 0x08)	/* Watchdog Status Register */
-#define		AT91_WDT_WDUNF		(1 << 0)		/* Watchdog Underflow */
-#define		AT91_WDT_WDERR		(1 << 1)		/* Watchdog Error */
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200.h b/include/asm-arm/arch-at91rm9200/at91rm9200.h
deleted file mode 100644
index c569b6a..0000000
--- a/include/asm-arm/arch-at91rm9200/at91rm9200.h
+++ /dev/null
@@ -1,291 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91rm9200.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Common definitions.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91RM9200_H
-#define AT91RM9200_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS		1	/* System Peripheral */
-#define AT91RM9200_ID_PIOA	2	/* Parallel IO Controller A */
-#define AT91RM9200_ID_PIOB	3	/* Parallel IO Controller B */
-#define AT91RM9200_ID_PIOC	4	/* Parallel IO Controller C */
-#define AT91RM9200_ID_PIOD	5	/* Parallel IO Controller D */
-#define AT91RM9200_ID_US0	6	/* USART 0 */
-#define AT91RM9200_ID_US1	7	/* USART 1 */
-#define AT91RM9200_ID_US2	8	/* USART 2 */
-#define AT91RM9200_ID_US3	9	/* USART 3 */
-#define AT91RM9200_ID_MCI	10	/* Multimedia Card Interface */
-#define AT91RM9200_ID_UDP	11	/* USB Device Port */
-#define AT91RM9200_ID_TWI	12	/* Two-Wire Interface */
-#define AT91RM9200_ID_SPI	13	/* Serial Peripheral Interface */
-#define AT91RM9200_ID_SSC0	14	/* Serial Synchronous Controller 0 */
-#define AT91RM9200_ID_SSC1	15	/* Serial Synchronous Controller 1 */
-#define AT91RM9200_ID_SSC2	16	/* Serial Synchronous Controller 2 */
-#define AT91RM9200_ID_TC0	17	/* Timer Counter 0 */
-#define AT91RM9200_ID_TC1	18	/* Timer Counter 1 */
-#define AT91RM9200_ID_TC2	19	/* Timer Counter 2 */
-#define AT91RM9200_ID_TC3	20	/* Timer Counter 3 */
-#define AT91RM9200_ID_TC4	21	/* Timer Counter 4 */
-#define AT91RM9200_ID_TC5	22	/* Timer Counter 5 */
-#define AT91RM9200_ID_UHP	23	/* USB Host port */
-#define AT91RM9200_ID_EMAC	24	/* Ethernet MAC */
-#define AT91RM9200_ID_IRQ0	25	/* Advanced Interrupt Controller (IRQ0) */
-#define AT91RM9200_ID_IRQ1	26	/* Advanced Interrupt Controller (IRQ1) */
-#define AT91RM9200_ID_IRQ2	27	/* Advanced Interrupt Controller (IRQ2) */
-#define AT91RM9200_ID_IRQ3	28	/* Advanced Interrupt Controller (IRQ3) */
-#define AT91RM9200_ID_IRQ4	29	/* Advanced Interrupt Controller (IRQ4) */
-#define AT91RM9200_ID_IRQ5	30	/* Advanced Interrupt Controller (IRQ5) */
-#define AT91RM9200_ID_IRQ6	31	/* Advanced Interrupt Controller (IRQ6) */
-
-
-/*
- * Peripheral physical base addresses.
- */
-#define AT91RM9200_BASE_TCB0	0xfffa0000
-#define AT91RM9200_BASE_TC0	0xfffa0000
-#define AT91RM9200_BASE_TC1	0xfffa0040
-#define AT91RM9200_BASE_TC2	0xfffa0080
-#define AT91RM9200_BASE_TCB1	0xfffa4000
-#define AT91RM9200_BASE_TC3	0xfffa4000
-#define AT91RM9200_BASE_TC4	0xfffa4040
-#define AT91RM9200_BASE_TC5	0xfffa4080
-#define AT91RM9200_BASE_UDP	0xfffb0000
-#define AT91RM9200_BASE_MCI	0xfffb4000
-#define AT91RM9200_BASE_TWI	0xfffb8000
-#define AT91RM9200_BASE_EMAC	0xfffbc000
-#define AT91RM9200_BASE_US0	0xfffc0000
-#define AT91RM9200_BASE_US1	0xfffc4000
-#define AT91RM9200_BASE_US2	0xfffc8000
-#define AT91RM9200_BASE_US3	0xfffcc000
-#define AT91RM9200_BASE_SSC0	0xfffd0000
-#define AT91RM9200_BASE_SSC1	0xfffd4000
-#define AT91RM9200_BASE_SSC2	0xfffd8000
-#define AT91RM9200_BASE_SPI	0xfffe0000
-#define AT91_BASE_SYS		0xfffff000
-
-
-/*
- * System Peripherals (offset from AT91_BASE_SYS)
- */
-#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)	/* Advanced Interrupt Controller */
-#define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)	/* Debug Unit */
-#define AT91_PIOA	(0xfffff400 - AT91_BASE_SYS)	/* PIO Controller A */
-#define AT91_PIOB	(0xfffff600 - AT91_BASE_SYS)	/* PIO Controller B */
-#define AT91_PIOC	(0xfffff800 - AT91_BASE_SYS)	/* PIO Controller C */
-#define AT91_PIOD	(0xfffffa00 - AT91_BASE_SYS)	/* PIO Controller D */
-#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)	/* Power Management Controller */
-#define AT91_ST		(0xfffffd00 - AT91_BASE_SYS)	/* System Timer */
-#define AT91_RTC	(0xfffffe00 - AT91_BASE_SYS)	/* Real-Time Clock */
-#define AT91_MC		(0xffffff00 - AT91_BASE_SYS)	/* Memory Controllers */
-
-#define AT91_MATRIX	0	/* not supported */
-
-/*
- * Internal Memory.
- */
-#define AT91RM9200_ROM_BASE	0x00100000	/* Internal ROM base address */
-#define AT91RM9200_ROM_SIZE	SZ_128K		/* Internal ROM size (128Kb) */
-
-#define AT91RM9200_SRAM_BASE	0x00200000	/* Internal SRAM base address */
-#define AT91RM9200_SRAM_SIZE	SZ_16K		/* Internal SRAM size (16Kb) */
-
-#define AT91RM9200_UHP_BASE	0x00300000	/* USB Host controller */
-
-
-#if 0
-/*
- * PIO pin definitions (peripheral A/B multiplexing).
- */
-#define AT91_PA0_MISO		(1 <<  0)	/* A: SPI Master-In Slave-Out */
-#define AT91_PA0_PCK3		(1 <<  0)	/* B: PMC Programmable Clock Output 3 */
-#define AT91_PA1_MOSI		(1 <<  1)	/* A: SPI Master-Out Slave-In */
-#define AT91_PA1_PCK0		(1 <<  1)	/* B: PMC Programmable Clock Output 0 */
-#define AT91_PA2_SPCK		(1 <<  2)	/* A: SPI Serial Clock */
-#define AT91_PA2_IRQ4		(1 <<  2)	/* B: External Interrupt 4 */
-#define AT91_PA3_NPCS0		(1 <<  3)	/* A: SPI Peripheral Chip Select 0 */
-#define AT91_PA3_IRQ5		(1 <<  3)	/* B: External Interrupt 5 */
-#define AT91_PA4_NPCS1		(1 <<  4)	/* A: SPI Peripheral Chip Select 1 */
-#define AT91_PA4_PCK1		(1 <<  4)	/* B: PMC Programmable Clock Output 1 */
-#define AT91_PA5_NPCS2		(1 <<  5)	/* A: SPI Peripheral Chip Select 2 */
-#define AT91_PA5_TXD3		(1 <<  5)	/* B: USART Transmit Data 3 */
-#define AT91_PA6_NPCS3		(1 <<  6)	/* A: SPI Peripheral Chip Select 3 */
-#define AT91_PA6_RXD3		(1 <<  6)	/* B: USART Receive Data 3 */
-#define AT91_PA7_ETXCK_EREFCK	(1 <<  7)	/* A: Ethernet Reference Clock / Transmit Clock */
-#define AT91_PA7_PCK2		(1 <<  7)	/* B: PMC Programmable Clock Output 2 */
-#define AT91_PA8_ETXEN		(1 <<  8)	/* A: Ethernet Transmit Enable */
-#define AT91_PA8_MCCDB		(1 <<  8)	/* B: MMC Multimedia Card B Command */
-#define AT91_PA9_ETX0		(1 <<  9)	/* A: Ethernet Transmit Data 0 */
-#define AT91_PA9_MCDB0		(1 <<  9)	/* B: MMC Multimedia Card B Data 0 */
-#define AT91_PA10_ETX1		(1 << 10)	/* A: Ethernet Transmit Data 1 */
-#define AT91_PA10_MCDB1		(1 << 10)	/* B: MMC Multimedia Card B Data 1 */
-#define AT91_PA11_ECRS_ECRSDV	(1 << 11)	/* A: Ethernet Carrier Sense / Data Valid */
-#define AT91_PA11_MCDB2		(1 << 11)	/* B: MMC Multimedia Card B Data 2 */
-#define AT91_PA12_ERX0		(1 << 12)	/* A: Ethernet Receive Data 0 */
-#define AT91_PA12_MCDB3		(1 << 12)	/* B: MMC Multimedia Card B Data 3 */
-#define AT91_PA13_ERX1		(1 << 13)	/* A: Ethernet Receive Data 1 */
-#define AT91_PA13_TCLK0		(1 << 13)	/* B: TC External Clock Input 0 */
-#define AT91_PA14_ERXER		(1 << 14)	/* A: Ethernet Receive Error */
-#define AT91_PA14_TCLK1		(1 << 14)	/* B: TC External Clock Input 1 */
-#define AT91_PA15_EMDC		(1 << 15)	/* A: Ethernet Management Data Clock */
-#define AT91_PA15_TCLK2		(1 << 15)	/* B: TC External Clock Input 2 */
-#define AT91_PA16_EMDIO		(1 << 16)	/* A: Ethernet Management Data I/O */
-#define AT91_PA16_IRQ6		(1 << 16)	/* B: External Interrupt 6 */
-#define AT91_PA17_TXD0		(1 << 17)	/* A: USART Transmit Data 0 */
-#define AT91_PA17_TIOA0		(1 << 17)	/* B: TC I/O Line A 0 */
-#define AT91_PA18_RXD0		(1 << 18)	/* A: USART Receive Data 0 */
-#define AT91_PA18_TIOB0		(1 << 18)	/* B: TC I/O Line B 0 */
-#define AT91_PA19_SCK0		(1 << 19)	/* A: USART Serial Clock 0 */
-#define AT91_PA19_TIOA1		(1 << 19)	/* B: TC I/O Line A 1 */
-#define AT91_PA20_CTS0		(1 << 20)	/* A: USART Clear To Send 0 */
-#define AT91_PA20_TIOB1		(1 << 20)	/* B: TC I/O Line B 1 */
-#define AT91_PA21_RTS0		(1 << 21)	/* A: USART Ready To Send 0 */
-#define AT91_PA21_TIOA2		(1 << 21)	/* B: TC I/O Line A 2 */
-#define AT91_PA22_RXD2		(1 << 22)	/* A: USART Receive Data 2 */
-#define AT91_PA22_TIOB2		(1 << 22)	/* B: TC I/O Line B 2 */
-#define AT91_PA23_TXD2		(1 << 23)	/* A: USART Transmit Data 2 */
-#define AT91_PA23_IRQ3		(1 << 23)	/* B: External Interrupt 3 */
-#define AT91_PA24_SCK2		(1 << 24)	/* A: USART Serial Clock 2 */
-#define AT91_PA24_PCK1		(1 << 24)	/* B: PMC Programmable Clock Output 1 */
-#define AT91_PA25_TWD		(1 << 25)	/* A: TWI Two-wire Serial Data */
-#define AT91_PA25_IRQ2		(1 << 25)	/* B: External Interrupt 2 */
-#define AT91_PA26_TWCK		(1 << 26)	/* A: TWI Two-wire Serial Clock */
-#define AT91_PA26_IRQ1		(1 << 26)	/* B: External Interrupt 1 */
-#define AT91_PA27_MCCK		(1 << 27)	/* A: MMC Multimedia Card Clock */
-#define AT91_PA27_TCLK3		(1 << 27)	/* B: TC External Clock Input 3 */
-#define AT91_PA28_MCCDA		(1 << 28)	/* A: MMC Multimedia Card A Command */
-#define AT91_PA28_TCLK4		(1 << 28)	/* B: TC External Clock Input 4 */
-#define AT91_PA29_MCDA0		(1 << 29)	/* A: MMC Multimedia Card A Data 0 */
-#define AT91_PA29_TCLK5		(1 << 29)	/* B: TC External Clock Input 5 */
-#define AT91_PA30_DRXD		(1 << 30)	/* A: DBGU Receive Data */
-#define AT91_PA30_CTS2		(1 << 30)	/* B: USART Clear To Send 2 */
-#define AT91_PA31_DTXD		(1 << 31)	/* A: DBGU Transmit Data */
-#define AT91_PA31_RTS2		(1 << 31)	/* B: USART Ready To Send 2 */
-
-#define AT91_PB0_TF0		(1 <<  0)	/* A: SSC Transmit Frame Sync 0 */
-#define AT91_PB0_RTS3		(1 <<  0)	/* B: USART Ready To Send 3 */
-#define AT91_PB1_TK0		(1 <<  1)	/* A: SSC Transmit Clock 0 */
-#define AT91_PB1_CTS3		(1 <<  1)	/* B: USART Clear To Send 3 */
-#define AT91_PB2_TD0		(1 <<  2)	/* A: SSC Transmit Data 0 */
-#define AT91_PB2_SCK3		(1 <<  2)	/* B: USART Serial Clock 3 */
-#define AT91_PB3_RD0		(1 <<  3)	/* A: SSC Receive Data 0 */
-#define AT91_PB3_MCDA1		(1 <<  3)	/* B: MMC Multimedia Card A Data 1 */
-#define AT91_PB4_RK0		(1 <<  4)	/* A: SSC Receive Clock 0 */
-#define AT91_PB4_MCDA2		(1 <<  4)	/* B: MMC Multimedia Card A Data 2 */
-#define AT91_PB5_RF0		(1 <<  5)	/* A: SSC Receive Frame Sync 0 */
-#define AT91_PB5_MCDA3		(1 <<  5)	/* B: MMC Multimedia Card A Data 3 */
-#define AT91_PB6_TF1		(1 <<  6)	/* A: SSC Transmit Frame Sync 1 */
-#define AT91_PB6_TIOA3		(1 <<  6)	/* B: TC I/O Line A 3 */
-#define AT91_PB7_TK1		(1 <<  7)	/* A: SSC Transmit Clock 1 */
-#define AT91_PB7_TIOB3		(1 <<  7)	/* B: TC I/O Line B 3 */
-#define AT91_PB8_TD1		(1 <<  8)	/* A: SSC Transmit Data 1 */
-#define AT91_PB8_TIOA4		(1 <<  8)	/* B: TC I/O Line A 4 */
-#define AT91_PB9_RD1		(1 <<  9)	/* A: SSC Receive Data 1 */
-#define AT91_PB9_TIOB4		(1 <<  9)	/* B: TC I/O Line B 4 */
-#define AT91_PB10_RK1		(1 << 10)	/* A: SSC Receive Clock 1 */
-#define AT91_PB10_TIOA5		(1 << 10)	/* B: TC I/O Line A 5 */
-#define AT91_PB11_RF1		(1 << 11)	/* A: SSC Receive Frame Sync 1 */
-#define AT91_PB11_TIOB5		(1 << 11)	/* B: TC I/O Line B 5 */
-#define AT91_PB12_TF2		(1 << 12)	/* A: SSC Transmit Frame Sync 2 */
-#define AT91_PB12_ETX2		(1 << 12)	/* B: Ethernet Transmit Data 2 */
-#define AT91_PB13_TK2		(1 << 13)	/* A: SSC Transmit Clock 3 */
-#define AT91_PB13_ETX3		(1 << 13)	/* B: Ethernet Transmit Data 3 */
-#define AT91_PB14_TD2		(1 << 14)	/* A: SSC Transmit Data 2 */
-#define AT91_PB14_ETXER		(1 << 14)	/* B: Ethernet Transmit Coding Error */
-#define AT91_PB15_RD2		(1 << 15)	/* A: SSC Receive Data 2 */
-#define AT91_PB15_ERX2		(1 << 15)	/* B: Ethernet Receive Data 2 */
-#define AT91_PB16_RK2		(1 << 16)	/* A: SSC Receive Clock 2 */
-#define AT91_PB16_ERX3		(1 << 16)	/* B: Ethernet Receive Data 3 */
-#define AT91_PB17_RF2		(1 << 17)	/* A: SSC Receive Frame Sync 2 */
-#define AT91_PB17_ERXDV		(1 << 17)	/* B: Ethernet Receive Data Valid */
-#define AT91_PB18_RI1		(1 << 18)	/* A: USART Ring Indicator 1 */
-#define AT91_PB18_ECOL		(1 << 18)	/* B: Ethernet Collision Detected */
-#define AT91_PB19_DTR1		(1 << 19)	/* A: USART Data Terminal Ready 1 */
-#define AT91_PB19_ERXCK		(1 << 19)	/* B: Ethernet Receive Clock */
-#define AT91_PB20_TXD1		(1 << 20)	/* A: USART Transmit Data 1 */
-#define AT91_PB21_RXD1		(1 << 21)	/* A: USART Receive Data 1 */
-#define AT91_PB22_SCK1		(1 << 22)	/* A: USART Serial Clock 1 */
-#define AT91_PB23_DCD1		(1 << 23)	/* A: USART Data Carrier Detect 1 */
-#define AT91_PB24_CTS1		(1 << 24)	/* A: USART Clear To Send 1 */
-#define AT91_PB25_DSR1		(1 << 25)	/* A: USART Data Set Ready 1 */
-#define AT91_PB25_EF100		(1 << 25)	/* B: Ethernet Force 100 Mbit */
-#define AT91_PB26_RTS1		(1 << 26)	/* A: USART Ready To Send 1 */
-#define AT91_PB27_PCK0		(1 << 27)	/* B: PMC Programmable Clock Output 0 */
-#define AT91_PB28_FIQ		(1 << 28)	/* A: Fast Interrupt */
-#define AT91_PB29_IRQ0		(1 << 29)	/* A: External Interrupt 0 */
-
-#define AT91_PC0_BFCK		(1 <<  0)	/* A: Burst Flash Clock */
-#define AT91_PC1_BFRDY_SMOE	(1 <<  1)	/* A: Burst Flash Ready / SmartMedia Output Enable */
-#define AT91_PC2_BFAVD		(1 <<  2)	/* A: Burst Flash Address Valid */
-#define AT91_PC3_BFBAA_SMWE	(1 <<  3)	/* A: Burst Flash Address Advance / SmartMedia Write Enable */
-#define AT91_PC4_BFOE		(1 <<  4)	/* A: Burst Flash Output Enable */
-#define AT91_PC5_BFWE		(1 <<  5)	/* A: Burst Flash Write Enable */
-#define AT91_PC6_NWAIT		(1 <<  6)	/* A: SMC Wait Signal */
-#define AT91_PC7_A23		(1 <<  7)	/* A: Address Bus 23 */
-#define AT91_PC8_A24		(1 <<  8)	/* A: Address Bus 24 */
-#define AT91_PC9_A25_CFRNW	(1 <<  9)	/* A: Address Bus 25 / Compact Flash Read Not Write */
-#define AT91_PC10_NCS4_CFCS	(1 << 10)	/* A: SMC Chip Select 4 / Compact Flash Chip Select */
-#define AT91_PC11_NCS5_CFCE1	(1 << 11)	/* A: SMC Chip Select 5 / Compact Flash Chip Enable 1 */
-#define AT91_PC12_NCS6_CFCE2	(1 << 12)	/* A: SMC Chip Select 6 / Compact Flash Chip Enable 2 */
-#define AT91_PC13_NCS7		(1 << 13)	/* A: Chip Select 7 */
-
-#define AT91_PD0_ETX0		(1 <<  0)	/* A: Ethernet Transmit Data 0 */
-#define AT91_PD1_ETX1		(1 <<  1)	/* A: Ethernet Transmit Data 1 */
-#define AT91_PD2_ETX2		(1 <<  2)	/* A: Ethernet Transmit Data 2 */
-#define AT91_PD3_ETX3		(1 <<  3)	/* A: Ethernet Transmit Data 3 */
-#define AT91_PD4_ETXEN		(1 <<  4)	/* A: Ethernet Transmit Enable */
-#define AT91_PD5_ETXER		(1 <<  5)	/* A: Ethernet Transmit Coding Error */
-#define AT91_PD6_DTXD		(1 <<  6)	/* A: DBGU Transmit Data */
-#define AT91_PD7_PCK0		(1 <<  7)	/* A: PMC Programmable Clock Output 0 */
-#define AT91_PD7_TSYNC		(1 <<  7)	/* B: ETM Trace Synchronization Signal */
-#define AT91_PD8_PCK1		(1 <<  8)	/* A: PMC Programmable Clock Output 1 */
-#define AT91_PD8_TCLK		(1 <<  8)	/* B: ETM Trace Clock */
-#define AT91_PD9_PCK2		(1 <<  9)	/* A: PMC Programmable Clock Output 2 */
-#define AT91_PD9_TPS0		(1 <<  9)	/* B: ETM Trace ARM Pipeline Status 0 */
-#define AT91_PD10_PCK3		(1 << 10)	/* A: PMC Programmable Clock Output 3 */
-#define AT91_PD10_TPS1		(1 << 10)	/* B: ETM Trace ARM Pipeline Status 1 */
-#define AT91_PD11_TPS2		(1 << 11)	/* B: ETM Trace ARM Pipeline Status 2 */
-#define AT91_PD12_TPK0		(1 << 12)	/* B: ETM Trace Packet Port 0 */
-#define AT91_PD13_TPK1		(1 << 13)	/* B: ETM Trace Packet Port 1 */
-#define AT91_PD14_TPK2		(1 << 14)	/* B: ETM Trace Packet Port 2 */
-#define AT91_PD15_TD0		(1 << 15)	/* A: SSC Transmit Data 0 */
-#define AT91_PD15_TPK3		(1 << 15)	/* B: ETM Trace Packet Port 3 */
-#define AT91_PD16_TD1		(1 << 16)	/* A: SSC Transmit Data 1 */
-#define AT91_PD16_TPK4		(1 << 16)	/* B: ETM Trace Packet Port 4 */
-#define AT91_PD17_TD2		(1 << 17)	/* A: SSC Transmit Data 2 */
-#define AT91_PD17_TPK5		(1 << 17)	/* B: ETM Trace Packet Port 5 */
-#define AT91_PD18_NPCS1		(1 << 18)	/* A: SPI Peripheral Chip Select 1 */
-#define AT91_PD18_TPK6		(1 << 18)	/* B: ETM Trace Packet Port 6 */
-#define AT91_PD19_NPCS2		(1 << 19)	/* A: SPI Peripheral Chip Select 2 */
-#define AT91_PD19_TPK7		(1 << 19)	/* B: ETM Trace Packet Port 7 */
-#define AT91_PD20_NPCS3		(1 << 20)	/* A: SPI Peripheral Chip Select 3 */
-#define AT91_PD20_TPK8		(1 << 20)	/* B: ETM Trace Packet Port 8 */
-#define AT91_PD21_RTS0		(1 << 21)	/* A: USART Ready To Send 0 */
-#define AT91_PD21_TPK9		(1 << 21)	/* B: ETM Trace Packet Port 9 */
-#define AT91_PD22_RTS1		(1 << 22)	/* A: USART Ready To Send 1 */
-#define AT91_PD22_TPK10		(1 << 22)	/* B: ETM Trace Packet Port 10 */
-#define AT91_PD23_RTS2		(1 << 23)	/* A: USART Ready To Send 2 */
-#define AT91_PD23_TPK11		(1 << 23)	/* B: ETM Trace Packet Port 11 */
-#define AT91_PD24_RTS3		(1 << 24)	/* A: USART Ready To Send 3 */
-#define AT91_PD24_TPK12		(1 << 24)	/* B: ETM Trace Packet Port 12 */
-#define AT91_PD25_DTR1		(1 << 25)	/* A: USART Data Terminal Ready 1 */
-#define AT91_PD25_TPK13		(1 << 25)	/* B: ETM Trace Packet Port 13 */
-#define AT91_PD26_TPK14		(1 << 26)	/* B: ETM Trace Packet Port 14 */
-#define AT91_PD27_TPK15		(1 << 27)	/* B: ETM Trace Packet Port 15 */
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_emac.h b/include/asm-arm/arch-at91rm9200/at91rm9200_emac.h
deleted file mode 100644
index fbc091e..0000000
--- a/include/asm-arm/arch-at91rm9200/at91rm9200_emac.h
+++ /dev/null
@@ -1,138 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91rm9200_emac.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Ethernet MAC registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91RM9200_EMAC_H
-#define AT91RM9200_EMAC_H
-
-#define	AT91_EMAC_CTL		0x00	/* Control Register */
-#define		AT91_EMAC_LB		(1 <<  0)	/* Loopback */
-#define		AT91_EMAC_LBL		(1 <<  1)	/* Loopback Local */
-#define		AT91_EMAC_RE		(1 <<  2)	/* Receive Enable */
-#define		AT91_EMAC_TE		(1 <<  3)	/* Transmit Enable */
-#define		AT91_EMAC_MPE		(1 <<  4)	/* Management Port Enable */
-#define		AT91_EMAC_CSR		(1 <<  5)	/* Clear Statistics Registers */
-#define		AT91_EMAC_INCSTAT	(1 <<  6)	/* Increment Statistics Registers */
-#define		AT91_EMAC_WES		(1 <<  7)	/* Write Enable for Statistics Registers */
-#define		AT91_EMAC_BP		(1 <<  8)	/* Back Pressure */
-
-#define	AT91_EMAC_CFG		0x04	/* Configuration Register */
-#define		AT91_EMAC_SPD		(1 <<  0)	/* Speed */
-#define		AT91_EMAC_FD		(1 <<  1)	/* Full Duplex */
-#define		AT91_EMAC_BR		(1 <<  2)	/* Bit Rate */
-#define		AT91_EMAC_CAF		(1 <<  4)	/* Copy All Frames */
-#define		AT91_EMAC_NBC		(1 <<  5)	/* No Broadcast */
-#define		AT91_EMAC_MTI		(1 <<  6)	/* Multicast Hash Enable */
-#define		AT91_EMAC_UNI		(1 <<  7)	/* Unicast Hash Enable */
-#define		AT91_EMAC_BIG		(1 <<  8)	/* Receive 1522 Bytes */
-#define		AT91_EMAC_EAE		(1 <<  9)	/* External Address Match Enable */
-#define		AT91_EMAC_CLK		(3 << 10)	/* MDC Clock Divisor */
-#define		AT91_EMAC_CLK_DIV8		(0 << 10)
-#define		AT91_EMAC_CLK_DIV16		(1 << 10)
-#define		AT91_EMAC_CLK_DIV32		(2 << 10)
-#define		AT91_EMAC_CLK_DIV64		(3 << 10)
-#define		AT91_EMAC_RTY		(1 << 12)	/* Retry Test */
-#define		AT91_EMAC_RMII		(1 << 13)	/* Reduce MII (RMII) */
-
-#define	AT91_EMAC_SR		0x08	/* Status Register */
-#define		AT91_EMAC_SR_LINK	(1 <<  0)	/* Link */
-#define		AT91_EMAC_SR_MDIO	(1 <<  1)	/* MDIO pin */
-#define		AT91_EMAC_SR_IDLE	(1 <<  2)	/* PHY idle */
-
-#define	AT91_EMAC_TAR		0x0c	/* Transmit Address Register */
-
-#define	AT91_EMAC_TCR		0x10	/* Transmit Control Register */
-#define		AT91_EMAC_LEN		(0x7ff << 0)	/* Transmit Frame Length */
-#define		AT91_EMAC_NCRC		(1     << 15)	/* No CRC */
-
-#define	AT91_EMAC_TSR		0x14	/* Transmit Status Register */
-#define		AT91_EMAC_TSR_OVR	(1 <<  0)	/* Transmit Buffer Overrun */
-#define		AT91_EMAC_TSR_COL	(1 <<  1)	/* Collision Occurred */
-#define		AT91_EMAC_TSR_RLE	(1 <<  2)	/* Retry Limit Exceeded */
-#define		AT91_EMAC_TSR_IDLE	(1 <<  3)	/* Transmitter Idle */
-#define		AT91_EMAC_TSR_BNQ	(1 <<  4)	/* Transmit Buffer not Queued */
-#define		AT91_EMAC_TSR_COMP	(1 <<  5)	/* Transmit Complete */
-#define		AT91_EMAC_TSR_UND	(1 <<  6)	/* Transmit Underrun */
-
-#define	AT91_EMAC_RBQP		0x18	/* Receive Buffer Queue Pointer */
-
-#define	AT91_EMAC_RSR		0x20	/* Receive Status Register */
-#define		AT91_EMAC_RSR_BNA	(1 <<  0)	/* Buffer Not Available */
-#define		AT91_EMAC_RSR_REC	(1 <<  1)	/* Frame Received */
-#define		AT91_EMAC_RSR_OVR	(1 <<  2)	/* RX Overrun */
-
-#define	AT91_EMAC_ISR		0x24	/* Interrupt Status Register */
-#define		AT91_EMAC_DONE		(1 <<  0)	/* Management Done */
-#define		AT91_EMAC_RCOM		(1 <<  1)	/* Receive Complete */
-#define		AT91_EMAC_RBNA		(1 <<  2)	/* Receive Buffer Not Available */
-#define		AT91_EMAC_TOVR		(1 <<  3)	/* Transmit Buffer Overrun */
-#define		AT91_EMAC_TUND		(1 <<  4)	/* Transmit Buffer Underrun */
-#define		AT91_EMAC_RTRY		(1 <<  5)	/* Retry Limit */
-#define		AT91_EMAC_TBRE		(1 <<  6)	/* Transmit Buffer Register Empty */
-#define		AT91_EMAC_TCOM		(1 <<  7)	/* Transmit Complete */
-#define		AT91_EMAC_TIDLE		(1 <<  8)	/* Transmit Idle */
-#define		AT91_EMAC_LINK		(1 <<  9)	/* Link */
-#define		AT91_EMAC_ROVR		(1 << 10)	/* RX Overrun */
-#define		AT91_EMAC_ABT		(1 << 11)	/* Abort */
-
-#define	AT91_EMAC_IER		0x28	/* Interrupt Enable Register */
-#define	AT91_EMAC_IDR		0x2c	/* Interrupt Disable Register */
-#define	AT91_EMAC_IMR		0x30	/* Interrupt Mask Register */
-
-#define	AT91_EMAC_MAN		0x34	/* PHY Maintenance Register */
-#define		AT91_EMAC_DATA		(0xffff << 0)	/* MDIO Data */
-#define		AT91_EMAC_REGA		(0x1f	<< 18)	/* MDIO Register */
-#define		AT91_EMAC_PHYA		(0x1f	<< 23)	/* MDIO PHY Address */
-#define		AT91_EMAC_RW		(3	<< 28)	/* Read/Write operation */
-#define			AT91_EMAC_RW_W		(1 << 28)
-#define			AT91_EMAC_RW_R		(2 << 28)
-#define		AT91_EMAC_MAN_802_3	0x40020000	/* IEEE 802.3 value */
-
-/*
- * Statistics Registers.
- */
-#define AT91_EMAC_FRA		0x40	/* Frames Transmitted OK */
-#define AT91_EMAC_SCOL		0x44	/* Single Collision Frame */
-#define AT91_EMAC_MCOL		0x48	/* Multiple Collision Frame */
-#define AT91_EMAC_OK		0x4c	/* Frames Received OK */
-#define AT91_EMAC_SEQE		0x50	/* Frame Check Sequence Error */
-#define AT91_EMAC_ALE		0x54	/* Alignmemt Error */
-#define AT91_EMAC_DTE		0x58	/* Deffered Transmission Frame */
-#define AT91_EMAC_LCOL		0x5c	/* Late Collision */
-#define AT91_EMAC_ECOL		0x60	/* Excessive Collision */
-#define AT91_EMAC_TUE		0x64	/* Transmit Underrun Error */
-#define AT91_EMAC_CSE		0x68	/* Carrier Sense Error */
-#define AT91_EMAC_DRFC		0x6c	/* Discard RX Frame */
-#define AT91_EMAC_ROV		0x70	/* Receive Overrun */
-#define AT91_EMAC_CDE		0x74	/* Code Error */
-#define AT91_EMAC_ELR		0x78	/* Excessive Length Error */
-#define AT91_EMAC_RJB		0x7c	/* Receive Jabber */
-#define AT91_EMAC_USF		0x80	/* Undersize Frame */
-#define AT91_EMAC_SQEE		0x84	/* SQE Test Error */
-
-/*
- * Address Registers.
- */
-#define AT91_EMAC_HSL		0x90	/* Hash Address Low [31:0] */
-#define AT91_EMAC_HSH		0x94	/* Hash Address High [63:32] */
-#define AT91_EMAC_SA1L		0x98	/* Specific Address 1 Low, bytes 0-3 */
-#define AT91_EMAC_SA1H		0x9c	/* Specific Address 1 High, bytes 4-5 */
-#define AT91_EMAC_SA2L		0xa0	/* Specific Address 2 Low, bytes 0-3 */
-#define AT91_EMAC_SA2H		0xa4	/* Specific Address 2 High, bytes 4-5 */
-#define AT91_EMAC_SA3L		0xa8	/* Specific Address 3 Low, bytes 0-3 */
-#define AT91_EMAC_SA3H		0xac	/* Specific Address 3 High, bytes 4-5 */
-#define AT91_EMAC_SA4L		0xb0	/* Specific Address 4 Low, bytes 0-3 */
-#define AT91_EMAC_SA4H		0xb4	/* Specific Address 4 High, bytes 4-5 */
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91rm9200_mc.h b/include/asm-arm/arch-at91rm9200/at91rm9200_mc.h
deleted file mode 100644
index 0c0d814..0000000
--- a/include/asm-arm/arch-at91rm9200/at91rm9200_mc.h
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91rm9200_mc.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Memory Controllers (MC, EBI, SMC, SDRAMC, BFC) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91RM9200_MC_H
-#define AT91RM9200_MC_H
-
-/* Memory Controller */
-#define AT91_MC_RCR		(AT91_MC + 0x00)	/* MC Remap Control Register */
-#define		AT91_MC_RCB		(1 <<  0)		/* Remap Command Bit */
-
-#define AT91_MC_ASR		(AT91_MC + 0x04)	/* MC Abort Status Register */
-#define		AT91_MC_UNADD		(1 <<  0)		/* Undefined Address Abort Status */
-#define		AT91_MC_MISADD		(1 <<  1)		/* Misaligned Address Abort Status */
-#define		AT91_MC_ABTSZ		(3 <<  8)		/* Abort Size Status */
-#define			AT91_MC_ABTSZ_BYTE		(0 << 8)
-#define			AT91_MC_ABTSZ_HALFWORD		(1 << 8)
-#define			AT91_MC_ABTSZ_WORD		(2 << 8)
-#define		AT91_MC_ABTTYP		(3 << 10)		/* Abort Type Status */
-#define			AT91_MC_ABTTYP_DATAREAD		(0 << 10)
-#define			AT91_MC_ABTTYP_DATAWRITE	(1 << 10)
-#define			AT91_MC_ABTTYP_FETCH		(2 << 10)
-#define		AT91_MC_MST0		(1 << 16)		/* ARM920T Abort Source */
-#define		AT91_MC_MST1		(1 << 17)		/* PDC Abort Source */
-#define		AT91_MC_MST2		(1 << 18)		/* UHP Abort Source */
-#define		AT91_MC_MST3		(1 << 19)		/* EMAC Abort Source */
-#define		AT91_MC_SVMST0		(1 << 24)		/* Saved ARM920T Abort Source */
-#define		AT91_MC_SVMST1		(1 << 25)		/* Saved PDC Abort Source */
-#define		AT91_MC_SVMST2		(1 << 26)		/* Saved UHP Abort Source */
-#define		AT91_MC_SVMST3		(1 << 27)		/* Saved EMAC Abort Source */
-
-#define AT91_MC_AASR		(AT91_MC + 0x08)	/* MC Abort Address Status Register */
-
-#define AT91_MC_MPR		(AT91_MC + 0x0c)	/* MC Master Priority Register */
-#define		AT91_MPR_MSTP0		(7 <<  0)		/* ARM920T Priority */
-#define		AT91_MPR_MSTP1		(7 <<  4)		/* PDC Priority */
-#define		AT91_MPR_MSTP2		(7 <<  8)		/* UHP Priority */
-#define		AT91_MPR_MSTP3		(7 << 12)		/* EMAC Priority */
-
-/* External Bus Interface (EBI) registers */
-#define AT91_EBI_CSA		(AT91_MC + 0x60)	/* Chip Select Assignment Register */
-#define		AT91_EBI_CS0A		(1 << 0)		/* Chip Select 0 Assignment */
-#define			AT91_EBI_CS0A_SMC		(0 << 0)
-#define			AT91_EBI_CS0A_BFC		(1 << 0)
-#define		AT91_EBI_CS1A		(1 << 1)		/* Chip Select 1 Assignment */
-#define			AT91_EBI_CS1A_SMC		(0 << 1)
-#define			AT91_EBI_CS1A_SDRAMC		(1 << 1)
-#define		AT91_EBI_CS3A		(1 << 3)		/* Chip Select 2 Assignment */
-#define			AT91_EBI_CS3A_SMC		(0 << 3)
-#define			AT91_EBI_CS3A_SMC_SMARTMEDIA	(1 << 3)
-#define		AT91_EBI_CS4A		(1 << 4)		/* Chip Select 3 Assignment */
-#define			AT91_EBI_CS4A_SMC		(0 << 4)
-#define			AT91_EBI_CS4A_SMC_COMPACTFLASH	(1 << 4)
-#define AT91_EBI_CFGR		(AT91_MC + 0x64)	/* Configuration Register */
-#define		AT91_EBI_DBPUC		(1 << 0)		/* Data Bus Pull-Up Configuration */
-
-/* Static Memory Controller (SMC) registers */
-#define	AT91_SMC_CSR(n)		(AT91_MC + 0x70 + ((n) * 4))/* SMC Chip Select Register */
-#define		AT91_SMC_NWS		(0x7f <<  0)		/* Number of Wait States */
-#define			AT91_SMC_NWS_(x)	((x) << 0)
-#define		AT91_SMC_WSEN		(1    <<  7)		/* Wait State Enable */
-#define		AT91_SMC_TDF		(0xf  <<  8)		/* Data Float Time */
-#define			AT91_SMC_TDF_(x)	((x) << 8)
-#define		AT91_SMC_BAT		(1    << 12)		/* Byte Access Type */
-#define		AT91_SMC_DBW		(3    << 13)		/* Data Bus Width */
-#define			AT91_SMC_DBW_16		(1 << 13)
-#define			AT91_SMC_DBW_8		(2 << 13)
-#define		AT91_SMC_DPR		(1 << 15)		/* Data Read Protocol */
-#define		AT91_SMC_ACSS		(3 << 16)		/* Address to Chip Select Setup */
-#define			AT91_SMC_ACSS_STD	(0 << 16)
-#define			AT91_SMC_ACSS_1		(1 << 16)
-#define			AT91_SMC_ACSS_2		(2 << 16)
-#define			AT91_SMC_ACSS_3		(3 << 16)
-#define		AT91_SMC_RWSETUP	(7 << 24)		/* Read & Write Signal Time Setup */
-#define			AT91_SMC_RWSETUP_(x)	((x) << 24)
-#define		AT91_SMC_RWHOLD		(7 << 28)		/* Read & Write Signal Hold Time */
-#define			AT91_SMC_RWHOLD_(x)	((x) << 28)
-
-/* SDRAM Controller registers */
-#define AT91_SDRAMC_MR		(AT91_MC + 0x90)	/* Mode Register */
-#define		AT91_SDRAMC_MODE	(0xf << 0)		/* Command Mode */
-#define			AT91_SDRAMC_MODE_NORMAL		(0 << 0)
-#define			AT91_SDRAMC_MODE_NOP		(1 << 0)
-#define			AT91_SDRAMC_MODE_PRECHARGE	(2 << 0)
-#define			AT91_SDRAMC_MODE_LMR		(3 << 0)
-#define			AT91_SDRAMC_MODE_REFRESH	(4 << 0)
-#define		AT91_SDRAMC_DBW		(1   << 4)		/* Data Bus Width */
-#define			AT91_SDRAMC_DBW_32	(0 << 4)
-#define			AT91_SDRAMC_DBW_16	(1 << 4)
-
-#define AT91_SDRAMC_TR		(AT91_MC + 0x94)	/* Refresh Timer Register */
-#define		AT91_SDRAMC_COUNT	(0xfff << 0)		/* Refresh Timer Count */
-
-#define AT91_SDRAMC_CR		(AT91_MC + 0x98)	/* Configuration Register */
-#define		AT91_SDRAMC_NC		(3   <<  0)		/* Number of Column Bits */
-#define			AT91_SDRAMC_NC_8	(0 << 0)
-#define			AT91_SDRAMC_NC_9	(1 << 0)
-#define			AT91_SDRAMC_NC_10	(2 << 0)
-#define			AT91_SDRAMC_NC_11	(3 << 0)
-#define		AT91_SDRAMC_NR		(3   <<  2)		/* Number of Row Bits */
-#define			AT91_SDRAMC_NR_11	(0 << 2)
-#define			AT91_SDRAMC_NR_12	(1 << 2)
-#define			AT91_SDRAMC_NR_13	(2 << 2)
-#define		AT91_SDRAMC_NB		(1   <<  4)		/* Number of Banks */
-#define			AT91_SDRAMC_NB_2	(0 << 4)
-#define			AT91_SDRAMC_NB_4	(1 << 4)
-#define		AT91_SDRAMC_CAS		(3   <<  5)		/* CAS Latency */
-#define			AT91_SDRAMC_CAS_2	(2 << 5)
-#define		AT91_SDRAMC_TWR		(0xf <<  7)		/* Write Recovery Delay */
-#define		AT91_SDRAMC_TRC		(0xf << 11)		/* Row Cycle Delay */
-#define		AT91_SDRAMC_TRP		(0xf << 15)		/* Row Precharge Delay */
-#define		AT91_SDRAMC_TRCD	(0xf << 19)		/* Row to Column Delay */
-#define		AT91_SDRAMC_TRAS	(0xf << 23)		/* Active to Precharge Delay */
-#define		AT91_SDRAMC_TXSR	(0xf << 27)		/* Exit Self Refresh to Active Delay */
-
-#define AT91_SDRAMC_SRR		(AT91_MC + 0x9c)	/* Self Refresh Register */
-#define AT91_SDRAMC_LPR		(AT91_MC + 0xa0)	/* Low Power Register */
-#define AT91_SDRAMC_IER		(AT91_MC + 0xa4)	/* Interrupt Enable Register */
-#define AT91_SDRAMC_IDR		(AT91_MC + 0xa8)	/* Interrupt Disable Register */
-#define AT91_SDRAMC_IMR		(AT91_MC + 0xac)	/* Interrupt Mask Register */
-#define AT91_SDRAMC_ISR		(AT91_MC + 0xb0)	/* Interrupt Status Register */
-
-/* Burst Flash Controller register */
-#define AT91_BFC_MR		(AT91_MC + 0xc0)	/* Mode Register */
-#define		AT91_BFC_BFCOM		(3   <<  0)		/* Burst Flash Controller Operating Mode */
-#define			AT91_BFC_BFCOM_DISABLED	(0 << 0)
-#define			AT91_BFC_BFCOM_ASYNC	(1 << 0)
-#define			AT91_BFC_BFCOM_BURST	(2 << 0)
-#define		AT91_BFC_BFCC		(3   <<  2)		/* Burst Flash Controller Clock */
-#define			AT91_BFC_BFCC_MCK	(1 << 2)
-#define			AT91_BFC_BFCC_DIV2	(2 << 2)
-#define			AT91_BFC_BFCC_DIV4	(3 << 2)
-#define		AT91_BFC_AVL		(0xf <<  4)		/* Address Valid Latency */
-#define		AT91_BFC_PAGES		(7   <<  8)		/* Page Size */
-#define			AT91_BFC_PAGES_NO_PAGE	(0 << 8)
-#define			AT91_BFC_PAGES_16	(1 << 8)
-#define			AT91_BFC_PAGES_32	(2 << 8)
-#define			AT91_BFC_PAGES_64	(3 << 8)
-#define			AT91_BFC_PAGES_128	(4 << 8)
-#define			AT91_BFC_PAGES_256	(5 << 8)
-#define			AT91_BFC_PAGES_512	(6 << 8)
-#define			AT91_BFC_PAGES_1024	(7 << 8)
-#define		AT91_BFC_OEL		(3   << 12)		/* Output Enable Latency */
-#define		AT91_BFC_BAAEN		(1   << 16)		/* Burst Address Advance Enable */
-#define		AT91_BFC_BFOEH		(1   << 17)		/* Burst Flash Output Enable Handling */
-#define		AT91_BFC_MUXEN		(1   << 18)		/* Multiplexed Bus Enable */
-#define		AT91_BFC_RDYEN		(1   << 19)		/* Ready Enable Mode */
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91sam9260.h b/include/asm-arm/arch-at91rm9200/at91sam9260.h
deleted file mode 100644
index 46f4dd6..0000000
--- a/include/asm-arm/arch-at91rm9200/at91sam9260.h
+++ /dev/null
@@ -1,125 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91sam9260.h
- *
- * (C) 2006 Andrew Victor
- *
- * Common definitions.
- * Based on AT91SAM9260 datasheet revision A (Preliminary).
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9260_H
-#define AT91SAM9260_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS		1	/* System Peripherals */
-#define AT91SAM9260_ID_PIOA	2	/* Parallel IO Controller A */
-#define AT91SAM9260_ID_PIOB	3	/* Parallel IO Controller B */
-#define AT91SAM9260_ID_PIOC	4	/* Parallel IO Controller C */
-#define AT91SAM9260_ID_ADC	5	/* Analog-to-Digital Converter */
-#define AT91SAM9260_ID_US0	6	/* USART 0 */
-#define AT91SAM9260_ID_US1	7	/* USART 1 */
-#define AT91SAM9260_ID_US2	8	/* USART 2 */
-#define AT91SAM9260_ID_MCI	9	/* Multimedia Card Interface */
-#define AT91SAM9260_ID_UDP	10	/* USB Device Port */
-#define AT91SAM9260_ID_TWI	11	/* Two-Wire Interface */
-#define AT91SAM9260_ID_SPI0	12	/* Serial Peripheral Interface 0 */
-#define AT91SAM9260_ID_SPI1	13	/* Serial Peripheral Interface 1 */
-#define AT91SAM9260_ID_SSC	14	/* Serial Synchronous Controller */
-#define AT91SAM9260_ID_TC0	17	/* Timer Counter 0 */
-#define AT91SAM9260_ID_TC1	18	/* Timer Counter 1 */
-#define AT91SAM9260_ID_TC2	19	/* Timer Counter 2 */
-#define AT91SAM9260_ID_UHP	20	/* USB Host port */
-#define AT91SAM9260_ID_EMAC	21	/* Ethernet */
-#define AT91SAM9260_ID_ISI	22	/* Image Sensor Interface */
-#define AT91SAM9260_ID_US3	23	/* USART 3 */
-#define AT91SAM9260_ID_US4	24	/* USART 4 */
-#define AT91SAM9260_ID_US5	25	/* USART 5 */
-#define AT91SAM9260_ID_TC3	26	/* Timer Counter 3 */
-#define AT91SAM9260_ID_TC4	27	/* Timer Counter 4 */
-#define AT91SAM9260_ID_TC5	28	/* Timer Counter 5 */
-#define AT91SAM9260_ID_IRQ0	29	/* Advanced Interrupt Controller (IRQ0) */
-#define AT91SAM9260_ID_IRQ1	30	/* Advanced Interrupt Controller (IRQ1) */
-#define AT91SAM9260_ID_IRQ2	31	/* Advanced Interrupt Controller (IRQ2) */
-
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91SAM9260_BASE_TCB0		0xfffa0000
-#define AT91SAM9260_BASE_TC0		0xfffa0000
-#define AT91SAM9260_BASE_TC1		0xfffa0040
-#define AT91SAM9260_BASE_TC2		0xfffa0080
-#define AT91SAM9260_BASE_UDP		0xfffa4000
-#define AT91SAM9260_BASE_MCI		0xfffa8000
-#define AT91SAM9260_BASE_TWI		0xfffac000
-#define AT91SAM9260_BASE_US0		0xfffb0000
-#define AT91SAM9260_BASE_US1		0xfffb4000
-#define AT91SAM9260_BASE_US2		0xfffb8000
-#define AT91SAM9260_BASE_SSC		0xfffbc000
-#define AT91SAM9260_BASE_ISI		0xfffc0000
-#define AT91SAM9260_BASE_EMAC		0xfffc4000
-#define AT91SAM9260_BASE_SPI0		0xfffc8000
-#define AT91SAM9260_BASE_SPI1		0xfffcc000
-#define AT91SAM9260_BASE_US3		0xfffd0000
-#define AT91SAM9260_BASE_US4		0xfffd4000
-#define AT91SAM9260_BASE_US5		0xfffd8000
-#define AT91SAM9260_BASE_TCB1		0xfffdc000
-#define AT91SAM9260_BASE_TC3		0xfffdc000
-#define AT91SAM9260_BASE_TC4		0xfffdc040
-#define AT91SAM9260_BASE_TC5		0xfffdc080
-#define AT91SAM9260_BASE_ADC		0xfffe0000
-#define AT91_BASE_SYS			0xffffe800
-
-/*
- * System Peripherals (offset from AT91_BASE_SYS)
- */
-#define AT91_ECC	(0xffffe800 - AT91_BASE_SYS)
-#define AT91_SDRAMC	(0xffffea00 - AT91_BASE_SYS)
-#define AT91_SMC	(0xffffec00 - AT91_BASE_SYS)
-#define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
-#define AT91_CCFG	(0xffffef10 - AT91_BASE_SYS)
-#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
-#define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)
-#define AT91_PIOA	(0xfffff400 - AT91_BASE_SYS)
-#define AT91_PIOB	(0xfffff600 - AT91_BASE_SYS)
-#define AT91_PIOC	(0xfffff800 - AT91_BASE_SYS)
-#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
-#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
-#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
-#define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
-#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
-#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
-#define AT91_GPBR	(0xfffffd50 - AT91_BASE_SYS)
-
-
-/*
- * Internal Memory.
- */
-#define AT91SAM9260_ROM_BASE	0x00100000	/* Internal ROM base address */
-#define AT91SAM9260_ROM_SIZE	SZ_32K		/* Internal ROM size (32Kb) */
-
-#define AT91SAM9260_SRAM0_BASE	0x00200000	/* Internal SRAM 0 base address */
-#define AT91SAM9260_SRAM0_SIZE	SZ_4K		/* Internal SRAM 0 size (4Kb) */
-#define AT91SAM9260_SRAM1_BASE	0x00300000	/* Internal SRAM 1 base address */
-#define AT91SAM9260_SRAM1_SIZE	SZ_4K		/* Internal SRAM 1 size (4Kb) */
-
-#define AT91SAM9260_UHP_BASE	0x00500000	/* USB Host controller */
-
-#if 0
-/*
- * PIO pin definitions (peripheral A/B multiplexing).
- */
-
-// TODO: Add
-
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h b/include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h
deleted file mode 100644
index 78f6b49..0000000
--- a/include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91sam9260_matrix.h
- *
- * Memory Controllers (MATRIX, EBI) - System peripherals registers.
- * Based on AT91SAM9260 datasheet revision B.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9260_MATRIX_H
-#define AT91SAM9260_MATRIX_H
-
-#define AT91_MATRIX_MCFG0	(AT91_MATRIX + 0x00)	/* Master Configuration Register 0 */
-#define AT91_MATRIX_MCFG1	(AT91_MATRIX + 0x04)	/* Master Configuration Register 1 */
-#define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
-#define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
-#define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x04)	/* Master Configuration Register 5 */
-#define		AT91_MATRIX_ULBT		(7 << 0)	/* Undefined Length Burst Type */
-#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
-#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
-#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
-#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
-#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
-
-#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x40)	/* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x44)	/* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x48)	/* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x4C)	/* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x50)	/* Slave Configuration Register 4 */
-#define		AT91_MATRIX_SLOT_CYCLE		(0xff <<  0)	/* Maximum Number of Allowed Cycles for a Burst */
-#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
-#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
-#define		AT91_MATRIX_FIXED_DEFMSTR	(7    << 18)	/* Fixed Index of Default Master */
-#define		AT91_MATRIX_ARBT		(3    << 24)	/* Arbitration Type */
-#define			AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
-#define			AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
-
-#define AT91_MATRIX_PRAS0	(AT91_MATRIX + 0x80)	/* Priority Register A for Slave 0 */
-#define AT91_MATRIX_PRAS1	(AT91_MATRIX + 0x88)	/* Priority Register A for Slave 1 */
-#define AT91_MATRIX_PRAS2	(AT91_MATRIX + 0x90)	/* Priority Register A for Slave 2 */
-#define AT91_MATRIX_PRAS3	(AT91_MATRIX + 0x98)	/* Priority Register A for Slave 3 */
-#define AT91_MATRIX_PRAS4	(AT91_MATRIX + 0xA0)	/* Priority Register A for Slave 4 */
-#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
-#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
-#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
-#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
-#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
-#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
-
-#define AT91_MATRIX_MRCR	(AT91_MATRIX + 0x100)	/* Master Remap Control Register */
-#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-
-#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x11C)	/* EBI Chip Select Assignment Register */
-#define		AT91_MATRIX_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
-#define			AT91_MATRIX_CS1A_SMC		(0 << 1)
-#define			AT91_MATRIX_CS1A_SDRAMC		(1 << 1)
-#define		AT91_MATRIX_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
-#define			AT91_MATRIX_CS3A_SMC		(0 << 3)
-#define			AT91_MATRIX_CS3A_SMC_SMARTMEDIA	(1 << 3)
-#define		AT91_MATRIX_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
-#define			AT91_MATRIX_CS4A_SMC		(0 << 4)
-#define			AT91_MATRIX_CS4A_SMC_CF1	(1 << 4)
-#define		AT91_MATRIX_CS5A		(1 << 5 )	/* Chip Select 5 Assignment */
-#define			AT91_MATRIX_CS5A_SMC		(0 << 5)
-#define			AT91_MATRIX_CS5A_SMC_CF2	(1 << 5)
-#define		AT91_MATRIX_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
-#define		AT91_MATRIX_VDDIOMSEL		(1 << 16)	/* Memory voltage selection */
-#define			AT91_MATRIX_VDDIOMSEL_1_8V	(0 << 16)
-#define			AT91_MATRIX_VDDIOMSEL_3_3V	(1 << 16)
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91sam9261.h b/include/asm-arm/arch-at91rm9200/at91sam9261.h
deleted file mode 100644
index 8d39672..0000000
--- a/include/asm-arm/arch-at91rm9200/at91sam9261.h
+++ /dev/null
@@ -1,292 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91sam9261.h
- *
- * Copyright (C) SAN People
- *
- * Common definitions.
- * Based on AT91SAM9261 datasheet revision E. (Preliminary)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9261_H
-#define AT91SAM9261_H
-
-/*
- * Peripheral identifiers/interrupts.
- */
-#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
-#define AT91_ID_SYS		1	/* System Peripherals */
-#define AT91SAM9261_ID_PIOA	2	/* Parallel IO Controller A */
-#define AT91SAM9261_ID_PIOB	3	/* Parallel IO Controller B */
-#define AT91SAM9261_ID_PIOC	4	/* Parallel IO Controller C */
-#define AT91SAM9261_ID_US0	6	/* USART 0 */
-#define AT91SAM9261_ID_US1	7	/* USART 1 */
-#define AT91SAM9261_ID_US2	8	/* USART 2 */
-#define AT91SAM9261_ID_MCI	9	/* Multimedia Card Interface */
-#define AT91SAM9261_ID_UDP	10	/* USB Device Port */
-#define AT91SAM9261_ID_TWI	11	/* Two-Wire Interface */
-#define AT91SAM9261_ID_SPI0	12	/* Serial Peripheral Interface 0 */
-#define AT91SAM9261_ID_SPI1	13	/* Serial Peripheral Interface 1 */
-#define AT91SAM9261_ID_SSC0	14	/* Serial Synchronous Controller 0 */
-#define AT91SAM9261_ID_SSC1	15	/* Serial Synchronous Controller 1 */
-#define AT91SAM9261_ID_SSC2	16	/* Serial Synchronous Controller 2 */
-#define AT91SAM9261_ID_TC0	17	/* Timer Counter 0 */
-#define AT91SAM9261_ID_TC1	18	/* Timer Counter 1 */
-#define AT91SAM9261_ID_TC2	19	/* Timer Counter 2 */
-#define AT91SAM9261_ID_UHP	20	/* USB Host port */
-#define AT91SAM9261_ID_LCDC	21	/* LDC Controller */
-#define AT91SAM9261_ID_IRQ0	29	/* Advanced Interrupt Controller (IRQ0) */
-#define AT91SAM9261_ID_IRQ1	30	/* Advanced Interrupt Controller (IRQ1) */
-#define AT91SAM9261_ID_IRQ2	31	/* Advanced Interrupt Controller (IRQ2) */
-
-
-/*
- * User Peripheral physical base addresses.
- */
-#define AT91SAM9261_BASE_TCB0		0xfffa0000
-#define AT91SAM9261_BASE_TC0		0xfffa0000
-#define AT91SAM9261_BASE_TC1		0xfffa0040
-#define AT91SAM9261_BASE_TC2		0xfffa0080
-#define AT91SAM9261_BASE_UDP		0xfffa4000
-#define AT91SAM9261_BASE_MCI		0xfffa8000
-#define AT91SAM9261_BASE_TWI		0xfffac000
-#define AT91SAM9261_BASE_US0		0xfffb0000
-#define AT91SAM9261_BASE_US1		0xfffb4000
-#define AT91SAM9261_BASE_US2		0xfffb8000
-#define AT91SAM9261_BASE_SSC0		0xfffbc000
-#define AT91SAM9261_BASE_SSC1		0xfffc0000
-#define AT91SAM9261_BASE_SSC2		0xfffc4000
-#define AT91SAM9261_BASE_SPI0		0xfffc8000
-#define AT91SAM9261_BASE_SPI1		0xfffcc000
-#define AT91_BASE_SYS			0xffffea00
-
-
-/*
- * System Peripherals (offset from AT91_BASE_SYS)
- */
-#define AT91_SDRAMC	(0xffffea00 - AT91_BASE_SYS)
-#define AT91_SMC	(0xffffec00 - AT91_BASE_SYS)
-#define AT91_MATRIX	(0xffffee00 - AT91_BASE_SYS)
-#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
-#define AT91_DBGU	(0xfffff200 - AT91_BASE_SYS)
-#define AT91_PIOA	(0xfffff400 - AT91_BASE_SYS)
-#define AT91_PIOB	(0xfffff600 - AT91_BASE_SYS)
-#define AT91_PIOC	(0xfffff800 - AT91_BASE_SYS)
-#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
-#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
-#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
-#define AT91_RTT	(0xfffffd20 - AT91_BASE_SYS)
-#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
-#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
-#define AT91_GPBR	(0xfffffd50 - AT91_BASE_SYS)
-
-
-/*
- * Internal Memory.
- */
-#define AT91SAM9261_SRAM_BASE	0x00300000	/* Internal SRAM base address */
-#define AT91SAM9261_SRAM_SIZE	0x00028000	/* Internal SRAM size (160Kb) */
-
-#define AT91SAM9261_ROM_BASE	0x00400000	/* Internal ROM base address */
-#define AT91SAM9261_ROM_SIZE	SZ_32K		/* Internal ROM size (32Kb) */
-
-#define AT91SAM9261_UHP_BASE	0x00500000	/* USB Host controller */
-#define AT91SAM9261_LCDC_BASE	0x00600000	/* LDC controller */
-
-
-#if 0
-/*
- * PIO pin definitions (peripheral A/B multiplexing).
- */
-#define AT91_PA0_SPI0_MISO	(1 <<  0)	/* A: SPI0 Master In Slave */
-#define AT91_PA0_MCDA0		(1 <<  0)	/* B: Multimedia Card A Data 0 */
-#define AT91_PA1_SPI0_MOSI	(1 <<  1)	/* A: SPI0 Master Out Slave */
-#define AT91_PA1_MCCDA		(1 <<  1)	/* B: Multimedia Card A Command */
-#define AT91_PA2_SPI0_SPCK	(1 <<  2)	/* A: SPI0 Serial Clock */
-#define AT91_PA2_MCCK		(1 <<  2)	/* B: Multimedia Card Clock */
-#define AT91_PA3_SPI0_NPCS0	(1 <<  3)	/* A: SPI0 Peripheral Chip Select 0 */
-#define AT91_PA4_SPI0_NPCS1	(1 <<  4)	/* A: SPI0 Peripheral Chip Select 1 */
-#define AT91_PA4_MCDA1		(1 <<  4)	/* B: Multimedia Card A Data 1 */
-#define AT91_PA5_SPI0_NPCS2	(1 <<  5)	/* A: SPI0 Peripheral Chip Select 2 */
-#define AT91_PA5_MCDA2		(1 <<  5)	/* B: Multimedia Card A Data 2 */
-#define AT91_PA6_SPI0_NPCS3	(1 <<  6)	/* A: SPI0 Peripheral Chip Select 3 */
-#define AT91_PA6_MCDA3		(1 <<  6)	/* B: Multimedia Card A Data 3 */
-#define AT91_PA7_TWD		(1 <<  7)	/* A: TWI Two-wire Serial Data */
-#define AT91_PA7_PCK0		(1 <<  7)	/* B: PMC Programmable clock Output 0 */
-#define AT91_PA8_TWCK		(1 <<  8)	/* A: TWI Two-wire Serial Clock */
-#define AT91_PA8_PCK1		(1 <<  8)	/* B: PMC Programmable clock Output 1 */
-#define AT91_PA9_DRXD		(1 <<  9)	/* A: DBGU Debug Receive Data */
-#define AT91_PA9_PCK2		(1 <<  9)	/* B: PMC Programmable clock Output 2 */
-#define AT91_PA10_DTXD		(1 << 10)	/* A: DBGU Debug Transmit Data */
-#define AT91_PA10_PCK3		(1 << 10)	/* B: PMC Programmable clock Output 3 */
-#define AT91_PA11_TSYNC		(1 << 11)	/* A: Trace Synchronization Signal */
-#define AT91_PA11_SCK1		(1 << 11)	/* B: USART1 Serial Clock */
-#define AT91_PA12_TCLK		(1 << 12)	/* A: Trace Clock */
-#define AT91_PA12_RTS1		(1 << 12)	/* B: USART1 Ready To Send */
-#define AT91_PA13_TPS0		(1 << 13)	/* A: Trace ARM Pipeline Status 0 */
-#define AT91_PA13_CTS1		(1 << 13)	/* B: USART1 Clear To Send */
-#define AT91_PA14_TPS1		(1 << 14)	/* A: Trace ARM Pipeline Status 1 */
-#define AT91_PA14_SCK2		(1 << 14)	/* B: USART2 Serial Clock */
-#define AT91_PA15_TPS2		(1 << 15)	/* A: Trace ARM Pipeline Status 2 */
-#define AT91_PA15_RTS2		(1 << 15)	/* B: USART2 Ready To Send */
-#define AT91_PA16_TPK0		(1 << 16)	/* A: Trace Packet Port 0 */
-#define AT91_PA16_CTS2		(1 << 16)	/* B: USART2 Clear To Send */
-#define AT91_PA17_TPK1		(1 << 17)	/* A: Trace Packet Port 1 */
-#define AT91_PA17_TF1		(1 << 17)	/* B: SSC1 Transmit Frame Sync */
-#define AT91_PA18_TPK2		(1 << 18)	/* A: Trace Packet Port 2 */
-#define AT91_PA18_TK1		(1 << 18)	/* B: SSC1 Transmit Clock */
-#define AT91_PA19_TPK3		(1 << 19)	/* A: Trace Packet Port 3 */
-#define AT91_PA19_TD1		(1 << 19)	/* B: SSC1 Transmit Data */
-#define AT91_PA20_TPK4		(1 << 20)	/* A: Trace Packet Port 4 */
-#define AT91_PA20_RD1		(1 << 20)	/* B: SSC1 Receive Data */
-#define AT91_PA21_TPK5		(1 << 21)	/* A: Trace Packet Port 5 */
-#define AT91_PA21_RK1		(1 << 21)	/* B: SSC1 Receive Clock */
-#define AT91_PA22_TPK6		(1 << 22)	/* A: Trace Packet Port 6 */
-#define AT91_PA22_RF1		(1 << 22)	/* B: SSC1 Receive Frame Sync */
-#define AT91_PA23_TPK7		(1 << 23)	/* A: Trace Packet Port 7 */
-#define AT91_PA23_RTS0		(1 << 23)	/* B: USART0 Ready To Send */
-#define AT91_PA24_TPK8		(1 << 24)	/* A: Trace Packet Port 8 */
-#define AT91_PA24_SPI1_NPCS1	(1 << 24)	/* B: SPI1 Peripheral Chip Select 1 */
-#define AT91_PA25_TPK9		(1 << 25)	/* A: Trace Packet Port 9 */
-#define AT91_PA25_SPI1_NPCS2	(1 << 25)	/* B: SPI1 Peripheral Chip Select 2 */
-#define AT91_PA26_TPK10		(1 << 26)	/* A: Trace Packet Port 10 */
-#define AT91_PA26_SPI1_NPCS3	(1 << 26)	/* B: SPI1 Peripheral Chip Select 3 */
-#define AT91_PA27_TPK11		(1 << 27)	/* A: Trace Packet Port 11 */
-#define AT91_PA27_SPI0_NPCS1	(1 << 27)	/* B: SPI0 Peripheral Chip Select 1 */
-#define AT91_PA28_TPK12		(1 << 28)	/* A: Trace Packet Port 12 */
-#define AT91_PA28_SPI0_NPCS2	(1 << 28)	/* B: SPI0 Peripheral Chip Select 2 */
-#define AT91_PA29_TPK13		(1 << 29)	/* A: Trace Packet Port 13 */
-#define AT91_PA29_SPI0_NPCS3	(1 << 29)	/* B: SPI0 Peripheral Chip Select 3 */
-#define AT91_PA30_TPK14		(1 << 30)	/* A: Trace Packet Port 14 */
-#define AT91_PA30_A23		(1 << 30)	/* B: Address Bus bit 23 */
-#define AT91_PA31_TPK15		(1 << 31)	/* A: Trace Packet Port 15 */
-#define AT91_PA31_A24		(1 << 31)	/* B: Address Bus bit 24 */
-
-#define AT91_PB0_LCDVSYNC	(1 <<  0)	/* A: LCD Vertical Synchronization */
-#define AT91_PB1_LCDHSYNC	(1 <<  1)	/* A: LCD Horizontal Synchronization */
-#define AT91_PB2_LCDDOTCK	(1 <<  2)	/* A: LCD Dot Clock */
-#define AT91_PB2_PCK0		(1 <<  2)	/* B: PMC Programmable clock Output 0 */
-#define AT91_PB3_LCDDEN		(1 <<  3)	/* A: LCD Data Enable */
-#define AT91_PB4_LCDCC		(1 <<  4)	/* A: LCD Contrast Control */
-#define AT91_PB4_LCDD2		(1 <<  4)	/* B: LCD Data Bus Bit 2 */
-#define AT91_PB5_LCDD0		(1 <<  5)	/* A: LCD Data Bus Bit 0 */
-#define AT91_PB5_LCDD3		(1 <<  5)	/* B: LCD Data Bus Bit 3 */
-#define AT91_PB6_LCDD1		(1 <<  6)	/* A: LCD Data Bus Bit 1 */
-#define AT91_PB6_LCDD4		(1 <<  6)	/* B: LCD Data Bus Bit 4 */
-#define AT91_PB7_LCDD2		(1 <<  7)	/* A: LCD Data Bus Bit 2 */
-#define AT91_PB7_LCDD5		(1 <<  7)	/* B: LCD Data Bus Bit 5 */
-#define AT91_PB8_LCDD3		(1 <<  8)	/* A: LCD Data Bus Bit 3 */
-#define AT91_PB8_LCDD6		(1 <<  8)	/* B: LCD Data Bus Bit 6 */
-#define AT91_PB9_LCDD4		(1 <<  9)	/* A: LCD Data Bus Bit 4 */
-#define AT91_PB9_LCDD7		(1 <<  9)	/* B: LCD Data Bus Bit 7 */
-#define AT91_PB10_LCDD5		(1 << 10)	/* A: LCD Data Bus Bit 5 */
-#define AT91_PB10_LCDD10	(1 << 10)	/* B: LCD Data Bus Bit 10 */
-#define AT91_PB11_LCDD6		(1 << 11)	/* A: LCD Data Bus Bit 6 */
-#define AT91_PB11_LCDD11	(1 << 11)	/* B: LCD Data Bus Bit 11 */
-#define AT91_PB12_LCDD7		(1 << 12)	/* A: LCD Data Bus Bit 7 */
-#define AT91_PB12_LCDD12	(1 << 12)	/* B: LCD Data Bus Bit 12 */
-#define AT91_PB13_LCDD8		(1 << 13)	/* A: LCD Data Bus Bit 8 */
-#define AT91_PB13_LCDD13	(1 << 13)	/* B: LCD Data Bus Bit 13 */
-#define AT91_PB14_LCDD9		(1 << 14)	/* A: LCD Data Bus Bit 9 */
-#define AT91_PB14_LCDD14	(1 << 14)	/* B: LCD Data Bus Bit 14 */
-#define AT91_PB15_LCDD10	(1 << 15)	/* A: LCD Data Bus Bit 10 */
-#define AT91_PB15_LCDD15	(1 << 15)	/* B: LCD Data Bus Bit 15 */
-#define AT91_PB16_LCDD11	(1 << 16)	/* A: LCD Data Bus Bit 11 */
-#define AT91_PB16_LCDD19	(1 << 16)	/* B: LCD Data Bus Bit 19 */
-#define AT91_PB17_LCDD12	(1 << 17)	/* A: LCD Data Bus Bit 12 */
-#define AT91_PB17_LCDD20	(1 << 17)	/* B: LCD Data Bus Bit 20 */
-#define AT91_PB18_LCDD13	(1 << 18)	/* A: LCD Data Bus Bit 13 */
-#define AT91_PB18_LCDD21	(1 << 18)	/* B: LCD Data Bus Bit 21 */
-#define AT91_PB19_LCDD14	(1 << 19)	/* A: LCD Data Bus Bit 14 */
-#define AT91_PB19_LCDD22	(1 << 19)	/* B: LCD Data Bus Bit 22 */
-#define AT91_PB20_LCDD15	(1 << 20)	/* A: LCD Data Bus Bit 15 */
-#define AT91_PB20_LCDD23	(1 << 20)	/* B: LCD Data Bus Bit 23 */
-#define AT91_PB21_TF0		(1 << 21)	/* A: SSC0 Transmit Frame Sync */
-#define AT91_PB21_LCDD16	(1 << 21)	/* B: LCD Data Bus Bit 16 */
-#define AT91_PB22_TK0		(1 << 22)	/* A: SSC0 Transmit Clock */
-#define AT91_PB22_LCDD17	(1 << 22)	/* B: LCD Data Bus Bit 17 */
-#define AT91_PB23_TD0		(1 << 23)	/* A: SSC0 Transmit Data */
-#define AT91_PB23_LCDD18	(1 << 23)	/* B: LCD Data Bus Bit 18 */
-#define AT91_PB24_RD0		(1 << 24)	/* A: SSC0 Receive Data */
-#define AT91_PB24_LCDD19	(1 << 24)	/* B: LCD Data Bus Bit 19 */
-#define AT91_PB25_RK0		(1 << 25)	/* A: SSC0 Receive Clock */
-#define AT91_PB25_LCDD20	(1 << 25)	/* B: LCD Data Bus Bit 20 */
-#define AT91_PB26_RF0		(1 << 26)	/* A: SSC0 Receive Frame Sync */
-#define AT91_PB26_LCDD21	(1 << 26)	/* B: LCD Data Bus Bit 21 */
-#define AT91_PB27_SPI1_NPCS1	(1 << 27)	/* A: SPI1 Peripheral Chip Select 1 */
-#define AT91_PB27_LCDD22	(1 << 27)	/* B: LCD Data Bus Bit 22 */
-#define AT91_PB28_SPI1_NPCS0	(1 << 28)	/* A: SPI1 Peripheral Chip Select 0 */
-#define AT91_PB28_LCDD23	(1 << 28)	/* B: LCD Data Bus Bit 23 */
-#define AT91_PB29_SPI1_SPCK	(1 << 29)	/* A: SPI1 Serial Clock */
-#define AT91_PB29_IRQ2		(1 << 29)	/* B: Interrupt input 2 */
-#define AT91_PB30_SPI1_MISO	(1 << 30)	/* A: SPI1 Master In Slave */
-#define AT91_PB30_IRQ1		(1 << 30)	/* B: Interrupt input 1 */
-#define AT91_PB31_SPI1_MOSI	(1 << 31)	/* A: SPI1 Master Out Slave */
-#define AT91_PB31_PCK2		(1 << 31)	/* B: PMC Programmable clock Output 2 */
-
-#define AT91_PC0_SMOE		(1 << 0)	/* A: SmartMedia Output Enable */
-#define AT91_PC0_NCS6		(1 << 0)	/* B: Chip Select 6 */
-#define AT91_PC1_SMWE		(1 << 1)	/* A: SmartMedia Write Enable */
-#define AT91_PC1_NCS7		(1 << 1)	/* B: Chip Select 7 */
-#define AT91_PC2_NWAIT		(1 << 2)	/* A: NWAIT */
-#define AT91_PC2_IRQ0		(1 << 2)	/* B: Interrupt input 0 */
-#define AT91_PC3_A25_CFRNW	(1 << 3)	/* A: Address Bus[25] / Compact Flash Read Not Write */
-#define AT91_PC4_NCS4_CFCS0	(1 << 4)	/* A: Chip Select 4 / CompactFlash Chip Select 0 */
-#define AT91_PC5_NCS5_CFCS1	(1 << 5)	/* A: Chip Select 5 / CompactFlash Chip Select 1 */
-#define AT91_PC6_CFCE1		(1 << 6)	/* A: CompactFlash Chip Enable 1 */
-#define AT91_PC7_CFCE2		(1 << 7)	/* A: CompactFlash Chip Enable 2 */
-#define AT91_PC8_TXD0		(1 << 8)	/* A: USART0 Transmit Data */
-#define AT91_PC8_PCK2		(1 << 8)	/* B: PMC Programmable clock Output 2 */
-#define AT91_PC9_RXD0		(1 << 9)	/* A: USART0 Receive Data */
-#define AT91_PC9_PCK3		(1 << 9)	/* B: PMC Programmable clock Output 3 */
-#define AT91_PC10_RTS0		(1 << 10)	/* A: USART0 Ready To Send */
-#define AT91_PC10_SCK0		(1 << 10)	/* B: USART0 Serial Clock */
-#define AT91_PC11_CTS0		(1 << 11)	/* A: USART0 Clear To Send */
-#define AT91_PC11_FIQ		(1 << 11)	/* B: AIC Fast Interrupt Input */
-#define AT91_PC12_TXD1		(1 << 12)	/* A: USART1 Transmit Data */
-#define AT91_PC12_NCS6		(1 << 12)	/* B: Chip Select 6 */
-#define AT91_PC13_RXD1		(1 << 13)	/* A: USART1 Receive Data */
-#define AT91_PC13_NCS7		(1 << 13)	/* B: Chip Select 7 */
-#define AT91_PC14_TXD2		(1 << 14)	/* A: USART2 Transmit Data */
-#define AT91_PC14_SPI1_NPCS2	(1 << 14)	/* B: SPI1 Peripheral Chip Select 2 */
-#define AT91_PC15_RXD2		(1 << 15)	/* A: USART2 Receive Data */
-#define AT91_PC15_SPI1_NPCS3	(1 << 15)	/* B: SPI1 Peripheral Chip Select 3 */
-#define AT91_PC16_D16		(1 << 16)	/* A: Data Bus [16] */
-#define AT91_PC16_TCLK0		(1 << 16)	/* B: Timer Counter 0 external clock input */
-#define AT91_PC17_D17		(1 << 17)	/* A: Data Bus [17] */
-#define AT91_PC17_TCLK1		(1 << 17)	/* B: Timer Counter 1 external clock input */
-#define AT91_PC18_D18		(1 << 18)	/* A: Data Bus [18] */
-#define AT91_PC18_TCLK2		(1 << 18)	/* B: Timer Counter 2 external clock input */
-#define AT91_PC19_D19		(1 << 19)	/* A: Data Bus [19] */
-#define AT91_PC19_TIOA0		(1 << 19)	/* B: Timer Counter 0 Multipurpose Timer I/O Pin A */
-#define AT91_PC20_D20		(1 << 20)	/* A: Data Bus [20] */
-#define AT91_PC20_TIOB0		(1 << 20)	/* B: Timer Counter 0 Multipurpose Timer I/O Pin B */
-#define AT91_PC21_D21		(1 << 21)	/* A: Data Bus [21] */
-#define AT91_PC21_TIOA1		(1 << 21)	/* B: Timer Counter 1 Multipurpose Timer I/O Pin A */
-#define AT91_PC22_D22		(1 << 22)	/* A: Data Bus [22] */
-#define AT91_PC22_TIOB1		(1 << 22)	/* B: Timer Counter 1 Multipurpose Timer I/O Pin B */
-#define AT91_PC23_D23		(1 << 23)	/* A: Data Bus [23] */
-#define AT91_PC23_TIOA2		(1 << 23)	/* B: Timer Counter 2 Multipurpose Timer I/O Pin A */
-#define AT91_PC24_D24		(1 << 24)	/* A: Data Bus [24] */
-#define AT91_PC24_TIOB2		(1 << 24)	/* B: Timer Counter 2 Multipurpose Timer I/O Pin B */
-#define AT91_PC25_D25		(1 << 25)	/* A: Data Bus [25] */
-#define AT91_PC25_TF2		(1 << 25)	/* B: SSC2 Transmit Frame Sync */
-#define AT91_PC26_D26		(1 << 26)	/* A: Data Bus [26] */
-#define AT91_PC26_TK2		(1 << 26)	/* B: SSC2 Transmit Clock */
-#define AT91_PC27_D27		(1 << 27)	/* A: Data Bus [27] */
-#define AT91_PC27_TD2		(1 << 27)	/* B: SSC2 Transmit Data */
-#define AT91_PC28_D28		(1 << 28)	/* A: Data Bus [28] */
-#define AT91_PC28_RD2		(1 << 28)	/* B: SSC2 Receive Data */
-#define AT91_PC29_D29		(1 << 29)	/* A: Data Bus [29] */
-#define AT91_PC29_RK2		(1 << 29)	/* B: SSC2 Receive Clock */
-#define AT91_PC30_D30		(1 << 30)	/* A: Data Bus [30] */
-#define AT91_PC30_RF2		(1 << 30)	/* B: SSC2 Receive Frame Sync */
-#define AT91_PC31_D31		(1 << 31)	/* A: Data Bus [31] */
-#define AT91_PC31_PCK1		(1 << 31)	/* B: PMC Programmable clock Output 1 */
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h b/include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h
deleted file mode 100644
index ec88efa..0000000
--- a/include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h
+++ /dev/null
@@ -1,62 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91sam9261_matrix.h
- *
- * Memory Controllers (MATRIX, EBI) - System peripherals registers.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9261_MATRIX_H
-#define AT91SAM9261_MATRIX_H
-
-#define AT91_MATRIX_MCFG	(AT91_MATRIX + 0x00)	/* Master Configuration Register */
-#define		AT91_MATRIX_RCB0	(1 << 0)		/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
-#define		AT91_MATRIX_RCB1	(1 << 1)		/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
-
-#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x04)	/* Slave Configuration Register 0 */
-#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x08)	/* Slave Configuration Register 1 */
-#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x0C)	/* Slave Configuration Register 2 */
-#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x10)	/* Slave Configuration Register 3 */
-#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x14)	/* Slave Configuration Register 4 */
-#define		AT91_MATRIX_SLOT_CYCLE		(0xff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
-#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
-#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
-#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
-#define		AT91_MATRIX_FIXED_DEFMSTR	(7    << 18)	/* Fixed Index of Default Master */
-
-#define AT91_MATRIX_TCR		(AT91_MATRIX + 0x24)	/* TCM Configuration Register */
-#define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
-#define			AT91_MATRIX_ITCM_0		(0 << 0)
-#define			AT91_MATRIX_ITCM_16		(5 << 0)
-#define			AT91_MATRIX_ITCM_32		(6 << 0)
-#define			AT91_MATRIX_ITCM_64		(7 << 0)
-#define		AT91_MATRIX_DTCM_SIZE		(0xf << 4)	/* Size of DTCM enabled memory block */
-#define			AT91_MATRIX_DTCM_0		(0 << 4)
-#define			AT91_MATRIX_DTCM_16		(5 << 4)
-#define			AT91_MATRIX_DTCM_32		(6 << 4)
-#define			AT91_MATRIX_DTCM_64		(7 << 4)
-
-#define AT91_MATRIX_EBICSA	(AT91_MATRIX + 0x30)	/* EBI Chip Select Assignment Register */
-#define		AT91_MATRIX_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
-#define			AT91_MATRIX_CS1A_SMC		(0 << 1)
-#define			AT91_MATRIX_CS1A_SDRAMC		(1 << 1)
-#define		AT91_MATRIX_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
-#define			AT91_MATRIX_CS3A_SMC		(0 << 3)
-#define			AT91_MATRIX_CS3A_SMC_SMARTMEDIA	(1 << 3)
-#define		AT91_MATRIX_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
-#define			AT91_MATRIX_CS4A_SMC		(0 << 4)
-#define			AT91_MATRIX_CS4A_SMC_CF1	(1 << 4)
-#define		AT91_MATRIX_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
-#define			AT91_MATRIX_CS5A_SMC		(0 << 5)
-#define			AT91_MATRIX_CS5A_SMC_CF2	(1 << 5)
-#define		AT91_MATRIX_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
-
-#define AT91_MATRIX_USBPUCR	(AT91_MATRIX + 0x34)	/* USB Pad Pull-Up Control Register */
-#define		AT91_MATRIX_USBPUCR_PUON	(1 << 30)	/* USB Device PAD Pull-up Enable */
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h b/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h
deleted file mode 100644
index 972e753..0000000
--- a/include/asm-arm/arch-at91rm9200/at91sam926x_mc.h
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/at91sam926x_mc.h
- *
- * Memory Controllers (SMC, SDRAMC) - System peripherals registers.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM926x_MC_H
-#define AT91SAM926x_MC_H
-
-/* SDRAM Controller (SDRAMC) registers */
-#define AT91_SDRAMC_MR		(AT91_SDRAMC + 0x00)	/* SDRAM Controller Mode Register */
-#define		AT91_SDRAMC_MODE	(0xf << 0)		/* Command Mode */
-#define			AT91_SDRAMC_MODE_NORMAL		0
-#define			AT91_SDRAMC_MODE_NOP		1
-#define			AT91_SDRAMC_MODE_PRECHARGE	2
-#define			AT91_SDRAMC_MODE_LMR		3
-#define			AT91_SDRAMC_MODE_REFRESH	4
-#define			AT91_SDRAMC_MODE_EXT_LMR	5
-#define			AT91_SDRAMC_MODE_DEEP		6
-
-#define AT91_SDRAMC_TR		(AT91_SDRAMC + 0x04)	/* SDRAM Controller Refresh Timer Register */
-#define		AT91_SDRAMC_COUNT	(0xfff << 0)		/* Refresh Timer Counter */
-
-#define AT91_SDRAMC_CR		(AT91_SDRAMC + 0x08)	/* SDRAM Controller Configuration Register */
-#define		AT91_SDRAMC_NC		(3 << 0)		/* Number of Column Bits */
-#define			AT91_SDRAMC_NC_8	(0 << 0)
-#define			AT91_SDRAMC_NC_9	(1 << 0)
-#define			AT91_SDRAMC_NC_10	(2 << 0)
-#define			AT91_SDRAMC_NC_11	(3 << 0)
-#define		AT91_SDRAMC_NR		(3 << 2)		/* Number of Row Bits */
-#define			AT91_SDRAMC_NR_11	(0 << 2)
-#define			AT91_SDRAMC_NR_12	(1 << 2)
-#define			AT91_SDRAMC_NR_13	(2 << 2)
-#define		AT91_SDRAMC_NB		(1 << 4)		/* Number of Banks */
-#define			AT91_SDRAMC_NB_2	(0 << 4)
-#define			AT91_SDRAMC_NB_4	(1 << 4)
-#define		AT91_SDRAMC_CAS		(3 << 5)		/* CAS Latency */
-#define			AT91_SDRAMC_CAS_1	(1 << 5)
-#define			AT91_SDRAMC_CAS_2	(2 << 5)
-#define			AT91_SDRAMC_CAS_3	(3 << 5)
-#define		AT91_SDRAMC_DBW		(1 << 7)		/* Data Bus Width */
-#define			AT91_SDRAMC_DBW_32	(0 << 7)
-#define			AT91_SDRAMC_DBW_16	(1 << 7)
-#define		AT91_SDRAMC_TWR		(0xf <<  8)		/* Write Recovery Delay */
-#define		AT91_SDRAMC_TRC		(0xf << 12)		/* Row Cycle Delay */
-#define		AT91_SDRAMC_TRP		(0xf << 16)		/* Row Precharge Delay */
-#define		AT91_SDRAMC_TRCD	(0xf << 20)		/* Row to Column Delay */
-#define		AT91_SDRAMC_TRAS	(0xf << 24)		/* Active to Precharge Delay */
-#define		AT91_SDRAMC_TXSR	(0xf << 28)		/* Exit Self Refresh to Active Delay */
-
-#define AT91_SDRAMC_LPR		(AT91_SDRAMC + 0x10)	/* SDRAM Controller Low Power Register */
-#define		AT91_SDRAMC_LPCB		(3 << 0)	/* Low-power Configurations */
-#define			AT91_SDRAMC_LPCB_DISABLE		0
-#define			AT91_SDRAMC_LPCB_SELF_REFRESH		1
-#define			AT91_SDRAMC_LPCB_POWER_DOWN		2
-#define			AT91_SDRAMC_LPCB_DEEP_POWER_DOWN	3
-#define		AT91_SDRAMC_PASR		(7 << 4)	/* Partial Array Self Refresh */
-#define		AT91_SDRAMC_TCSR		(3 << 8)	/* Temperature Compensated Self Refresh */
-#define		AT91_SDRAMC_DS			(3 << 10)	/* Drive Strenght */
-#define		AT91_SDRAMC_TIMEOUT		(3 << 12)	/* Time to define when Low Power Mode is enabled */
-#define			AT91_SDRAMC_TIMEOUT_0_CLK_CYCLES	(0 << 12)
-#define			AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES	(1 << 12)
-#define			AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES	(2 << 12)
-
-#define AT91_SDRAMC_IER		(AT91_SDRAMC + 0x14)	/* SDRAM Controller Interrupt Enable Register */
-#define AT91_SDRAMC_IDR		(AT91_SDRAMC + 0x18)	/* SDRAM Controller Interrupt Disable Register */
-#define AT91_SDRAMC_IMR		(AT91_SDRAMC + 0x1C)	/* SDRAM Controller Interrupt Mask Register */
-#define AT91_SDRAMC_ISR		(AT91_SDRAMC + 0x20)	/* SDRAM Controller Interrupt Status Register */
-#define		AT91_SDRAMC_RES		(1 << 0)		/* Refresh Error Status */
-
-#define AT91_SDRAMC_MDR		(AT91_SDRAMC + 0x24)	/* SDRAM Memory Device Register */
-#define		AT91_SDRAMC_MD		(3 << 0)		/* Memory Device Type */
-#define			AT91_SDRAMC_MD_SDRAM		0
-#define			AT91_SDRAMC_MD_LOW_POWER_SDRAM	1
-
-
-/* Static Memory Controller (SMC) registers */
-#define AT91_SMC_SETUP(n)	(AT91_SMC + 0x00 + ((n)*0x10))	/* Setup Register for CS n */
-#define		AT91_SMC_NWESETUP	(0x3f << 0)			/* NWE Setup Length */
-#define			AT91_SMC_NWESETUP_(x)	((x) << 0)
-#define		AT91_SMC_NCS_WRSETUP	(0x3f << 8)			/* NCS Setup Length in Write Access */
-#define			AT91_SMC_NCS_WRSETUP_(x)	((x) << 8)
-#define		AT91_SMC_NRDSETUP	(0x3f << 16)			/* NRD Setup Length */
-#define			AT91_SMC_NRDSETUP_(x)	((x) << 16)
-#define		AT91_SMC_NCS_RDSETUP	(0x3f << 24)			/* NCS Setup Length in Read Access */
-#define			AT91_SMC_NCS_RDSETUP_(x)	((x) << 24)
-
-#define AT91_SMC_PULSE(n)	(AT91_SMC + 0x04 + ((n)*0x10))	/* Pulse Register for CS n */
-#define		AT91_SMC_NWEPULSE	(0x7f <<  0)			/* NWE Pulse Length */
-#define			AT91_SMC_NWEPULSE_(x)	((x) << 0)
-#define		AT91_SMC_NCS_WRPULSE	(0x7f <<  8)			/* NCS Pulse Length in Write Access */
-#define			AT91_SMC_NCS_WRPULSE_(x)((x) << 8)
-#define		AT91_SMC_NRDPULSE	(0x7f << 16)			/* NRD Pulse Length */
-#define			AT91_SMC_NRDPULSE_(x)	((x) << 16)
-#define		AT91_SMC_NCS_RDPULSE	(0x7f << 24)			/* NCS Pulse Length in Read Access */
-#define			AT91_SMC_NCS_RDPULSE_(x)((x) << 24)
-
-#define AT91_SMC_CYCLE(n)	(AT91_SMC + 0x08 + ((n)*0x10))	/* Cycle Register for CS n */
-#define		AT91_SMC_NWECYCLE	(0x1ff << 0 )			/* Total Write Cycle Length */
-#define			AT91_SMC_NWECYCLE_(x)	((x) << 0)
-#define		AT91_SMC_NRDCYCLE	(0x1ff << 16)			/* Total Read Cycle Length */
-#define			AT91_SMC_NRDCYCLE_(x)	((x) << 16)
-
-#define AT91_SMC_MODE(n)	(AT91_SMC + 0x0c + ((n)*0x10))	/* Mode Register for CS n */
-#define		AT91_SMC_READMODE	(1 <<  0)			/* Read Mode */
-#define		AT91_SMC_WRITEMODE	(1 <<  1)			/* Write Mode */
-#define		AT91_SMC_EXNWMODE	(3 <<  4)			/* NWAIT Mode */
-#define			AT91_SMC_EXNWMODE_DISABLE	(0 << 4)
-#define			AT91_SMC_EXNWMODE_FROZEN	(2 << 4)
-#define			AT91_SMC_EXNWMODE_READY		(3 << 4)
-#define		AT91_SMC_BAT		(1 <<  8)			/* Byte Access Type */
-#define			AT91_SMC_BAT_SELECT		(0 << 8)
-#define			AT91_SMC_BAT_WRITE		(1 << 8)
-#define		AT91_SMC_DBW		(3 << 12)			/* Data Bus Width */
-#define			AT91_SMC_DBW_8			(0 << 12)
-#define			AT91_SMC_DBW_16			(1 << 12)
-#define			AT91_SMC_DBW_32			(2 << 12)
-#define		AT91_SMC_TDF		(0xf << 16)			/* Data Float Time. */
-#define			AT91_SMC_TDF_(x)		((x) << 16)
-#define		AT91_SMC_TDFMODE	(1 << 20)			/* TDF Optimization - Enabled */
-#define		AT91_SMC_PMEN		(1 << 24)			/* Page Mode Enabled */
-#define		AT91_SMC_PS		(3 << 28)			/* Page Size */
-#define			AT91_SMC_PS_4			(0 << 28)
-#define			AT91_SMC_PS_8			(1 << 28)
-#define			AT91_SMC_PS_16			(2 << 28)
-#define			AT91_SMC_PS_32			(3 << 28)
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/board.h b/include/asm-arm/arch-at91rm9200/board.h
deleted file mode 100644
index f3a974b..0000000
--- a/include/asm-arm/arch-at91rm9200/board.h
+++ /dev/null
@@ -1,121 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/board.h
- *
- *  Copyright (C) 2005 HP Labs
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-/*
- * These are data structures found in platform_device.dev.platform_data,
- * and describing board-specific data needed by drivers.  For example,
- * which pin is used for a given GPIO role.
- *
- * In 2.6, drivers should strongly avoid board-specific knowledge so
- * that supporting new boards normally won't require driver patches.
- * Most board-specific knowledge should be in arch/.../board-*.c files.
- */
-
-#ifndef __ASM_ARCH_BOARD_H
-#define __ASM_ARCH_BOARD_H
-
-#include <linux/mtd/partitions.h>
-#include <linux/device.h>
-#include <linux/spi/spi.h>
-
- /* USB Device */
-struct at91_udc_data {
-	u8	vbus_pin;		/* high == host powering us */
-	u8	pullup_pin;		/* high == D+ pulled up */
-};
-extern void __init at91_add_device_udc(struct at91_udc_data *data);
-
- /* Compact Flash */
-struct at91_cf_data {
-	u8	irq_pin;		/* I/O IRQ */
-	u8	det_pin;		/* Card detect */
-	u8	vcc_pin;		/* power switching */
-	u8	rst_pin;		/* card reset */
-	u8	chipselect;		/* EBI Chip Select number */
-};
-extern void __init at91_add_device_cf(struct at91_cf_data *data);
-
- /* MMC / SD */
-struct at91_mmc_data {
-	u8		det_pin;	/* card detect IRQ */
-	unsigned	slot_b:1;	/* uses Slot B */
-	unsigned	wire4:1;	/* (SD) supports DAT0..DAT3 */
-	u8		wp_pin;		/* (SD) writeprotect detect */
-	u8		vcc_pin;	/* power switching (high == on) */
-};
-extern void __init at91_add_device_mmc(struct at91_mmc_data *data);
-
- /* Ethernet */
-struct at91_eth_data {
-	u8		phy_irq_pin;	/* PHY IRQ */
-	u8		is_rmii;	/* using RMII interface? */
-};
-extern void __init at91_add_device_eth(struct at91_eth_data *data);
-
-#if defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9263)
-#define eth_platform_data	at91_eth_data
-#endif
-
- /* USB Host */
-struct at91_usbh_data {
-	u8		ports;		/* number of ports on root hub */
-};
-extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
-
- /* NAND / SmartMedia */
-struct at91_nand_data {
-	u8		enable_pin;	/* chip enable */
-	u8		det_pin;	/* card detect */
-	u8		rdy_pin;	/* ready/busy */
-	u8		ale;		/* address line number connected to ALE */
-	u8		cle;		/* address line number connected to CLE */
-	u8		bus_width_16;	/* buswidth is 16 bit */
-	struct mtd_partition* (*partition_info)(int, int*);
-};
-extern void __init at91_add_device_nand(struct at91_nand_data *data);
-
- /* I2C*/
-extern void __init at91_add_device_i2c(void);
-
- /* SPI */
-extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices);
-
- /* Serial */
-struct at91_uart_config {
-	unsigned short	console_tty;	/* tty number of serial console */
-	unsigned short	nr_tty;		/* number of serial tty's */
-	short		tty_map[];	/* map UART to tty number */
-};
-extern struct platform_device *atmel_default_console_device;
-extern void __init at91_init_serial(struct at91_uart_config *config);
-
-struct atmel_uart_data {
-	short		use_dma_tx;	/* use transmit DMA? */
-	short		use_dma_rx;	/* use receive DMA? */
-	void __iomem	*regs;		/* virtual base address, if any */
-};
-extern void __init at91_add_device_serial(void);
-
- /* LEDs */
-extern u8 at91_leds_cpu;
-extern u8 at91_leds_timer;
-extern void __init at91_init_leds(u8 cpu_led, u8 timer_led);
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/cpu.h b/include/asm-arm/arch-at91rm9200/cpu.h
deleted file mode 100644
index 6f8d09b..0000000
--- a/include/asm-arm/arch-at91rm9200/cpu.h
+++ /dev/null
@@ -1,49 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/cpu.h
- *
- *  Copyright (C) 2006 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_CPU_H
-#define __ASM_ARCH_CPU_H
-
-#include <asm/hardware.h>
-#include <asm/arch/at91_dbgu.h>
-
-
-#define ARCH_ID_AT91RM9200	0x09290780
-#define ARCH_ID_AT91SAM9260	0x019803a0
-#define ARCH_ID_AT91SAM9261	0x019703a0
-
-
-static inline unsigned long at91_cpu_identify(void)
-{
-	return (at91_sys_read(AT91_DBGU_CIDR) & ~AT91_CIDR_VERSION);
-}
-
-
-#ifdef CONFIG_ARCH_AT91RM9200
-#define cpu_is_at91rm9200()	(at91_cpu_identify() == ARCH_ID_AT91RM9200)
-#else
-#define cpu_is_at91rm9200()	(0)
-#endif
-
-#ifdef CONFIG_ARCH_AT91SAM9260
-#define cpu_is_at91sam9260()	(at91_cpu_identify() == ARCH_ID_AT91SAM9260)
-#else
-#define cpu_is_at91sam9260()	(0)
-#endif
-
-#ifdef CONFIG_ARCH_AT91SAM9261
-#define cpu_is_at91sam9261()	(at91_cpu_identify() == ARCH_ID_AT91SAM9261)
-#else
-#define cpu_is_at91sam9261()	(0)
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/debug-macro.S b/include/asm-arm/arch-at91rm9200/debug-macro.S
deleted file mode 100644
index 85cdadf..0000000
--- a/include/asm-arm/arch-at91rm9200/debug-macro.S
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/debug-macro.S
- *
- *  Copyright (C) 2003-2005 SAN People
- *
- * Debugging macro include header
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-
-#include <asm/hardware.h>
-#include <asm/arch/at91_dbgu.h>
-
-	.macro	addruart,rx
-	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1				@ MMU enabled?
-	ldreq	\rx, =AT91_BASE_SYS		@ System peripherals (phys address)
-	ldrne	\rx, =AT91_VA_BASE_SYS		@ System peripherals (virt address)
-	.endm
-
-	.macro	senduart,rd,rx
-	strb	\rd, [\rx, #AT91_DBGU_THR]	@ Write to Transmitter Holding Register
-	.endm
-
-	.macro	waituart,rd,rx
-1001:	ldr	\rd, [\rx, #AT91_DBGU_SR]	@ Read Status Register
-	tst	\rd, #AT91_DBGU_TXRDY		@ DBGU_TXRDY = 1 when ready to transmit
-	beq	1001b
-	.endm
-
-	.macro	busyuart,rd,rx
-1001:	ldr	\rd, [\rx, #AT91_DBGU_SR]	@ Read Status Register
-	tst	\rd, #AT91_DBGU_TXEMPTY		@ DBGU_TXEMPTY = 1 when transmission complete
-	beq	1001b
-	.endm
-
diff --git a/include/asm-arm/arch-at91rm9200/dma.h b/include/asm-arm/arch-at91rm9200/dma.h
deleted file mode 100644
index 22c1dfd..0000000
--- a/include/asm-arm/arch-at91rm9200/dma.h
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/dma.h
- *
- *  Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
diff --git a/include/asm-arm/arch-at91rm9200/entry-macro.S b/include/asm-arm/arch-at91rm9200/entry-macro.S
deleted file mode 100644
index 57248a7..0000000
--- a/include/asm-arm/arch-at91rm9200/entry-macro.S
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/entry-macro.S
- *
- *  Copyright (C) 2003-2005 SAN People
- *
- * Low-level IRQ helper macros for AT91RM9200 platforms
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <asm/hardware.h>
-#include <asm/arch/at91_aic.h>
-
-	.macro	disable_fiq
-	.endm
-
-	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-	ldr	\base, =(AT91_VA_BASE_SYS)		@ base virtual address of SYS peripherals
-	ldr	\irqnr, [\base, #AT91_AIC_IVR]		@ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
-	ldr	\irqstat, [\base, #AT91_AIC_ISR]	@ read interrupt source number
-	teq	\irqstat, #0				@ ISR is 0 when no current interrupt, or spurious interrupt
-	streq	\tmp, [\base, #AT91_AIC_EOICR]		@ not going to be handled further, then ACK it now.
-	.endm
-
diff --git a/include/asm-arm/arch-at91rm9200/gpio.h b/include/asm-arm/arch-at91rm9200/gpio.h
deleted file mode 100644
index a011d27..0000000
--- a/include/asm-arm/arch-at91rm9200/gpio.h
+++ /dev/null
@@ -1,199 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/gpio.h
- *
- *  Copyright (C) 2005 HP Labs
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_AT91RM9200_GPIO_H
-#define __ASM_ARCH_AT91RM9200_GPIO_H
-
-#include <asm/irq.h>
-
-#define PIN_BASE		NR_AIC_IRQS
-
-#define MAX_GPIO_BANKS		4
-
-/* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */
-
-#define	AT91_PIN_PA0	(PIN_BASE + 0x00 + 0)
-#define	AT91_PIN_PA1	(PIN_BASE + 0x00 + 1)
-#define	AT91_PIN_PA2	(PIN_BASE + 0x00 + 2)
-#define	AT91_PIN_PA3	(PIN_BASE + 0x00 + 3)
-#define	AT91_PIN_PA4	(PIN_BASE + 0x00 + 4)
-
-#define	AT91_PIN_PA5	(PIN_BASE + 0x00 + 5)
-#define	AT91_PIN_PA6	(PIN_BASE + 0x00 + 6)
-#define	AT91_PIN_PA7	(PIN_BASE + 0x00 + 7)
-#define	AT91_PIN_PA8	(PIN_BASE + 0x00 + 8)
-#define	AT91_PIN_PA9	(PIN_BASE + 0x00 + 9)
-
-#define	AT91_PIN_PA10	(PIN_BASE + 0x00 + 10)
-#define	AT91_PIN_PA11	(PIN_BASE + 0x00 + 11)
-#define	AT91_PIN_PA12	(PIN_BASE + 0x00 + 12)
-#define	AT91_PIN_PA13	(PIN_BASE + 0x00 + 13)
-#define	AT91_PIN_PA14	(PIN_BASE + 0x00 + 14)
-
-#define	AT91_PIN_PA15	(PIN_BASE + 0x00 + 15)
-#define	AT91_PIN_PA16	(PIN_BASE + 0x00 + 16)
-#define	AT91_PIN_PA17	(PIN_BASE + 0x00 + 17)
-#define	AT91_PIN_PA18	(PIN_BASE + 0x00 + 18)
-#define	AT91_PIN_PA19	(PIN_BASE + 0x00 + 19)
-
-#define	AT91_PIN_PA20	(PIN_BASE + 0x00 + 20)
-#define	AT91_PIN_PA21	(PIN_BASE + 0x00 + 21)
-#define	AT91_PIN_PA22	(PIN_BASE + 0x00 + 22)
-#define	AT91_PIN_PA23	(PIN_BASE + 0x00 + 23)
-#define	AT91_PIN_PA24	(PIN_BASE + 0x00 + 24)
-
-#define	AT91_PIN_PA25	(PIN_BASE + 0x00 + 25)
-#define	AT91_PIN_PA26	(PIN_BASE + 0x00 + 26)
-#define	AT91_PIN_PA27	(PIN_BASE + 0x00 + 27)
-#define	AT91_PIN_PA28	(PIN_BASE + 0x00 + 28)
-#define	AT91_PIN_PA29	(PIN_BASE + 0x00 + 29)
-
-#define	AT91_PIN_PA30	(PIN_BASE + 0x00 + 30)
-#define	AT91_PIN_PA31	(PIN_BASE + 0x00 + 31)
-
-#define	AT91_PIN_PB0	(PIN_BASE + 0x20 + 0)
-#define	AT91_PIN_PB1	(PIN_BASE + 0x20 + 1)
-#define	AT91_PIN_PB2	(PIN_BASE + 0x20 + 2)
-#define	AT91_PIN_PB3	(PIN_BASE + 0x20 + 3)
-#define	AT91_PIN_PB4	(PIN_BASE + 0x20 + 4)
-
-#define	AT91_PIN_PB5	(PIN_BASE + 0x20 + 5)
-#define	AT91_PIN_PB6	(PIN_BASE + 0x20 + 6)
-#define	AT91_PIN_PB7	(PIN_BASE + 0x20 + 7)
-#define	AT91_PIN_PB8	(PIN_BASE + 0x20 + 8)
-#define	AT91_PIN_PB9	(PIN_BASE + 0x20 + 9)
-
-#define	AT91_PIN_PB10	(PIN_BASE + 0x20 + 10)
-#define	AT91_PIN_PB11	(PIN_BASE + 0x20 + 11)
-#define	AT91_PIN_PB12	(PIN_BASE + 0x20 + 12)
-#define	AT91_PIN_PB13	(PIN_BASE + 0x20 + 13)
-#define	AT91_PIN_PB14	(PIN_BASE + 0x20 + 14)
-
-#define	AT91_PIN_PB15	(PIN_BASE + 0x20 + 15)
-#define	AT91_PIN_PB16	(PIN_BASE + 0x20 + 16)
-#define	AT91_PIN_PB17	(PIN_BASE + 0x20 + 17)
-#define	AT91_PIN_PB18	(PIN_BASE + 0x20 + 18)
-#define	AT91_PIN_PB19	(PIN_BASE + 0x20 + 19)
-
-#define	AT91_PIN_PB20	(PIN_BASE + 0x20 + 20)
-#define	AT91_PIN_PB21	(PIN_BASE + 0x20 + 21)
-#define	AT91_PIN_PB22	(PIN_BASE + 0x20 + 22)
-#define	AT91_PIN_PB23	(PIN_BASE + 0x20 + 23)
-#define	AT91_PIN_PB24	(PIN_BASE + 0x20 + 24)
-
-#define	AT91_PIN_PB25	(PIN_BASE + 0x20 + 25)
-#define	AT91_PIN_PB26	(PIN_BASE + 0x20 + 26)
-#define	AT91_PIN_PB27	(PIN_BASE + 0x20 + 27)
-#define	AT91_PIN_PB28	(PIN_BASE + 0x20 + 28)
-#define	AT91_PIN_PB29	(PIN_BASE + 0x20 + 29)
-
-#define	AT91_PIN_PB30	(PIN_BASE + 0x20 + 30)
-#define	AT91_PIN_PB31	(PIN_BASE + 0x20 + 31)
-
-#define	AT91_PIN_PC0	(PIN_BASE + 0x40 + 0)
-#define	AT91_PIN_PC1	(PIN_BASE + 0x40 + 1)
-#define	AT91_PIN_PC2	(PIN_BASE + 0x40 + 2)
-#define	AT91_PIN_PC3	(PIN_BASE + 0x40 + 3)
-#define	AT91_PIN_PC4	(PIN_BASE + 0x40 + 4)
-
-#define	AT91_PIN_PC5	(PIN_BASE + 0x40 + 5)
-#define	AT91_PIN_PC6	(PIN_BASE + 0x40 + 6)
-#define	AT91_PIN_PC7	(PIN_BASE + 0x40 + 7)
-#define	AT91_PIN_PC8	(PIN_BASE + 0x40 + 8)
-#define	AT91_PIN_PC9	(PIN_BASE + 0x40 + 9)
-
-#define	AT91_PIN_PC10	(PIN_BASE + 0x40 + 10)
-#define	AT91_PIN_PC11	(PIN_BASE + 0x40 + 11)
-#define	AT91_PIN_PC12	(PIN_BASE + 0x40 + 12)
-#define	AT91_PIN_PC13	(PIN_BASE + 0x40 + 13)
-#define	AT91_PIN_PC14	(PIN_BASE + 0x40 + 14)
-
-#define	AT91_PIN_PC15	(PIN_BASE + 0x40 + 15)
-#define	AT91_PIN_PC16	(PIN_BASE + 0x40 + 16)
-#define	AT91_PIN_PC17	(PIN_BASE + 0x40 + 17)
-#define	AT91_PIN_PC18	(PIN_BASE + 0x40 + 18)
-#define	AT91_PIN_PC19	(PIN_BASE + 0x40 + 19)
-
-#define	AT91_PIN_PC20	(PIN_BASE + 0x40 + 20)
-#define	AT91_PIN_PC21	(PIN_BASE + 0x40 + 21)
-#define	AT91_PIN_PC22	(PIN_BASE + 0x40 + 22)
-#define	AT91_PIN_PC23	(PIN_BASE + 0x40 + 23)
-#define	AT91_PIN_PC24	(PIN_BASE + 0x40 + 24)
-
-#define	AT91_PIN_PC25	(PIN_BASE + 0x40 + 25)
-#define	AT91_PIN_PC26	(PIN_BASE + 0x40 + 26)
-#define	AT91_PIN_PC27	(PIN_BASE + 0x40 + 27)
-#define	AT91_PIN_PC28	(PIN_BASE + 0x40 + 28)
-#define	AT91_PIN_PC29	(PIN_BASE + 0x40 + 29)
-
-#define	AT91_PIN_PC30	(PIN_BASE + 0x40 + 30)
-#define	AT91_PIN_PC31	(PIN_BASE + 0x40 + 31)
-
-#define	AT91_PIN_PD0	(PIN_BASE + 0x60 + 0)
-#define	AT91_PIN_PD1	(PIN_BASE + 0x60 + 1)
-#define	AT91_PIN_PD2	(PIN_BASE + 0x60 + 2)
-#define	AT91_PIN_PD3	(PIN_BASE + 0x60 + 3)
-#define	AT91_PIN_PD4	(PIN_BASE + 0x60 + 4)
-
-#define	AT91_PIN_PD5	(PIN_BASE + 0x60 + 5)
-#define	AT91_PIN_PD6	(PIN_BASE + 0x60 + 6)
-#define	AT91_PIN_PD7	(PIN_BASE + 0x60 + 7)
-#define	AT91_PIN_PD8	(PIN_BASE + 0x60 + 8)
-#define	AT91_PIN_PD9	(PIN_BASE + 0x60 + 9)
-
-#define	AT91_PIN_PD10	(PIN_BASE + 0x60 + 10)
-#define	AT91_PIN_PD11	(PIN_BASE + 0x60 + 11)
-#define	AT91_PIN_PD12	(PIN_BASE + 0x60 + 12)
-#define	AT91_PIN_PD13	(PIN_BASE + 0x60 + 13)
-#define	AT91_PIN_PD14	(PIN_BASE + 0x60 + 14)
-
-#define	AT91_PIN_PD15	(PIN_BASE + 0x60 + 15)
-#define	AT91_PIN_PD16	(PIN_BASE + 0x60 + 16)
-#define	AT91_PIN_PD17	(PIN_BASE + 0x60 + 17)
-#define	AT91_PIN_PD18	(PIN_BASE + 0x60 + 18)
-#define	AT91_PIN_PD19	(PIN_BASE + 0x60 + 19)
-
-#define	AT91_PIN_PD20	(PIN_BASE + 0x60 + 20)
-#define	AT91_PIN_PD21	(PIN_BASE + 0x60 + 21)
-#define	AT91_PIN_PD22	(PIN_BASE + 0x60 + 22)
-#define	AT91_PIN_PD23	(PIN_BASE + 0x60 + 23)
-#define	AT91_PIN_PD24	(PIN_BASE + 0x60 + 24)
-
-#define	AT91_PIN_PD25	(PIN_BASE + 0x60 + 25)
-#define	AT91_PIN_PD26	(PIN_BASE + 0x60 + 26)
-#define	AT91_PIN_PD27	(PIN_BASE + 0x60 + 27)
-#define	AT91_PIN_PD28	(PIN_BASE + 0x60 + 28)
-#define	AT91_PIN_PD29	(PIN_BASE + 0x60 + 29)
-
-#define	AT91_PIN_PD30	(PIN_BASE + 0x60 + 30)
-#define	AT91_PIN_PD31	(PIN_BASE + 0x60 + 31)
-
-#ifndef __ASSEMBLY__
-/* setup setup routines, called from board init or driver probe() */
-extern int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup);
-extern int __init_or_module at91_set_B_periph(unsigned pin, int use_pullup);
-extern int __init_or_module at91_set_gpio_input(unsigned pin, int use_pullup);
-extern int __init_or_module at91_set_gpio_output(unsigned pin, int value);
-extern int __init_or_module at91_set_deglitch(unsigned pin, int is_on);
-extern int __init_or_module at91_set_multi_drive(unsigned pin, int is_on);
-
-/* callable at any time */
-extern int at91_set_gpio_value(unsigned pin, int value);
-extern int at91_get_gpio_value(unsigned pin);
-
-/* callable only from core power-management code */
-extern void at91_gpio_suspend(void);
-extern void at91_gpio_resume(void);
-#endif
-
-#endif
-
diff --git a/include/asm-arm/arch-at91rm9200/hardware.h b/include/asm-arm/arch-at91rm9200/hardware.h
deleted file mode 100644
index 9ea5bfe..0000000
--- a/include/asm-arm/arch-at91rm9200/hardware.h
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/hardware.h
- *
- *  Copyright (C) 2003 SAN People
- *  Copyright (C) 2003 ATMEL
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <asm/sizes.h>
-
-#if defined(CONFIG_ARCH_AT91RM9200)
-#include <asm/arch/at91rm9200.h>
-#elif defined(CONFIG_ARCH_AT91SAM9260)
-#include <asm/arch/at91sam9260.h>
-#elif defined(CONFIG_ARCH_AT91SAM9261)
-#include <asm/arch/at91sam9261.h>
-#else
-#error "Unsupported AT91 processor"
-#endif
-
-
-/*
- * Remap the peripherals from address 0xFFFA0000 .. 0xFFFFFFFF
- * to 0xFEFA0000 .. 0xFF000000.  (384Kb)
- */
-#define AT91_IO_PHYS_BASE	0xFFFA0000
-#define AT91_IO_SIZE		(0xFFFFFFFF - AT91_IO_PHYS_BASE + 1)
-#define AT91_IO_VIRT_BASE	(0xFF000000 - AT91_IO_SIZE)
-
- /* Convert a physical IO address to virtual IO address */
-#define AT91_IO_P2V(x)	((x) - AT91_IO_PHYS_BASE + AT91_IO_VIRT_BASE)
-
-/*
- * Virtual to Physical Address mapping for IO devices.
- */
-#define AT91_VA_BASE_SYS	AT91_IO_P2V(AT91_BASE_SYS)
-#define AT91_VA_BASE_EMAC	AT91_IO_P2V(AT91RM9200_BASE_EMAC)
-
- /* Internal SRAM is mapped below the IO devices */
-#define AT91_SRAM_MAX		SZ_1M
-#define AT91_VIRT_BASE		(AT91_IO_VIRT_BASE - AT91_SRAM_MAX)
-
-/* Serial ports */
-#define ATMEL_MAX_UART		7		/* 6 USART3's and one DBGU port (SAM9260) */
-
-/* External Memory Map */
-#define AT91_CHIPSELECT_0	0x10000000
-#define AT91_CHIPSELECT_1	0x20000000
-#define AT91_CHIPSELECT_2	0x30000000
-#define AT91_CHIPSELECT_3	0x40000000
-#define AT91_CHIPSELECT_4	0x50000000
-#define AT91_CHIPSELECT_5	0x60000000
-#define AT91_CHIPSELECT_6	0x70000000
-#define AT91_CHIPSELECT_7	0x80000000
-
-/* SDRAM */
-#define AT91_SDRAM_BASE		AT91_CHIPSELECT_1
-
-/* Clocks */
-#define AT91_SLOW_CLOCK		32768		/* slow clock */
-
-#ifndef __ASSEMBLY__
-#include <asm/io.h>
-
-static inline unsigned int at91_sys_read(unsigned int reg_offset)
-{
-	void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
-
-	return __raw_readl(addr + reg_offset);
-}
-
-static inline void at91_sys_write(unsigned int reg_offset, unsigned long value)
-{
-	void __iomem *addr = (void __iomem *)AT91_VA_BASE_SYS;
-
-	__raw_writel(value, addr + reg_offset);
-}
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/io.h b/include/asm-arm/arch-at91rm9200/io.h
deleted file mode 100644
index 88fd1be..0000000
--- a/include/asm-arm/arch-at91rm9200/io.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/io.h
- *
- *  Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_IO_H
-#define __ASM_ARCH_IO_H
-
-#include <asm/io.h>
-
-#define IO_SPACE_LIMIT		0xFFFFFFFF
-
-#define __io(a)			((void __iomem *)(a))
-#define __mem_pci(a)		(a)
-
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/irqs.h b/include/asm-arm/arch-at91rm9200/irqs.h
deleted file mode 100644
index c0679ea..0000000
--- a/include/asm-arm/arch-at91rm9200/irqs.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/irqs.h
- *
- *  Copyright (C) 2004 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#include <asm/arch/at91_aic.h>
-
-#define NR_AIC_IRQS 32
-
-
-/*
- * Acknowledge interrupt with AIC after interrupt has been handled.
- *   (by kernel/irq.c)
- */
-#define irq_finish(irq) do { at91_sys_write(AT91_AIC_EOICR, 0); } while (0)
-
-
-/*
- * IRQ interrupt symbols are the AT91xxx_ID_* symbols
- * for IRQs handled directly through the AIC, or else the AT91_PIN_*
- * symbols in gpio.h for ones handled indirectly as GPIOs.
- * We make provision for 4 banks of GPIO.
- */
-#define	NR_IRQS		(NR_AIC_IRQS + (4 * 32))
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/memory.h b/include/asm-arm/arch-at91rm9200/memory.h
deleted file mode 100644
index f985069..0000000
--- a/include/asm-arm/arch-at91rm9200/memory.h
+++ /dev/null
@@ -1,39 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/memory.h
- *
- *  Copyright (C) 2004 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_MEMORY_H
-#define __ASM_ARCH_MEMORY_H
-
-#include <asm/hardware.h>
-
-#define PHYS_OFFSET	(AT91_SDRAM_BASE)
-
-
-/*
- * Virtual view <-> DMA view memory address translations
- * virt_to_bus: Used to translate the virtual address to an
- *              address suitable to be passed to set_dma_addr
- * bus_to_virt: Used to convert an address for DMA operations
- *              to an address that the kernel can use.
- */
-#define __virt_to_bus(x) __virt_to_phys(x)
-#define __bus_to_virt(x) __phys_to_virt(x)
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/system.h b/include/asm-arm/arch-at91rm9200/system.h
deleted file mode 100644
index 9c67130..0000000
--- a/include/asm-arm/arch-at91rm9200/system.h
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/system.h
- *
- *  Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_SYSTEM_H
-#define __ASM_ARCH_SYSTEM_H
-
-#include <asm/hardware.h>
-#include <asm/arch/at91_st.h>
-#include <asm/arch/at91_dbgu.h>
-
-static inline void arch_idle(void)
-{
-	/*
-	 * Disable the processor clock.  The processor will be automatically
-	 * re-enabled by an interrupt or by a reset.
-	 */
-//	at91_sys_write(AT91_PMC_SCDR, AT91_PMC_PCK);
-
-	/*
-	 * Set the processor (CP15) into 'Wait for Interrupt' mode.
-	 * Unlike disabling the processor clock via the PMC (above)
-	 *  this allows the processor to be woken via JTAG.
-	 */
-	cpu_do_idle();
-}
-
-void (*at91_arch_reset)(void);
-
-static inline void arch_reset(char mode)
-{
-	/* call the CPU-specific reset function */
-	if (at91_arch_reset)
-		(at91_arch_reset)();
-}
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/timex.h b/include/asm-arm/arch-at91rm9200/timex.h
deleted file mode 100644
index faeca45..0000000
--- a/include/asm-arm/arch-at91rm9200/timex.h
+++ /dev/null
@@ -1,37 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/timex.h
- *
- *  Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-#include <asm/hardware.h>
-
-#if defined(CONFIG_ARCH_AT91RM9200)
-
-#define CLOCK_TICK_RATE		(AT91_SLOW_CLOCK)
-
-#elif defined(CONFIG_ARCH_AT91SAM9260) || defined(CONFIG_ARCH_AT91SAM9261)
-
-#define AT91SAM9_MASTER_CLOCK	99300000
-#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
-
-#endif
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/uncompress.h b/include/asm-arm/arch-at91rm9200/uncompress.h
deleted file mode 100644
index 34b4b93f..0000000
--- a/include/asm-arm/arch-at91rm9200/uncompress.h
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/uncompress.h
- *
- *  Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#include <asm/hardware.h>
-#include <asm/arch/at91_dbgu.h>
-
-/*
- * The following code assumes the serial port has already been
- * initialized by the bootloader.  If you didn't setup a port in
- * your bootloader then nothing will appear (which might be desired).
- *
- * This does not append a newline
- */
-static void putc(int c)
-{
-	void __iomem *sys = (void __iomem *) AT91_BASE_SYS;	/* physical address */
-
-	while (!(__raw_readl(sys + AT91_DBGU_SR) & AT91_DBGU_TXRDY))
-		barrier();
-	__raw_writel(c, sys + AT91_DBGU_THR);
-}
-
-static inline void flush(void)
-{
-	void __iomem *sys = (void __iomem *) AT91_BASE_SYS;	/* physical address */
-
-	/* wait for transmission to complete */
-	while (!(__raw_readl(sys + AT91_DBGU_SR) & AT91_DBGU_TXEMPTY))
-		barrier();
-}
-
-#define arch_decomp_setup()
-
-#define arch_decomp_wdog()
-
-#endif
diff --git a/include/asm-arm/arch-at91rm9200/vmalloc.h b/include/asm-arm/arch-at91rm9200/vmalloc.h
deleted file mode 100644
index 0a23b8c..0000000
--- a/include/asm-arm/arch-at91rm9200/vmalloc.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/*
- * include/asm-arm/arch-at91rm9200/vmalloc.h
- *
- *  Copyright (C) 2003 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-
-#ifndef __ASM_ARCH_VMALLOC_H
-#define __ASM_ARCH_VMALLOC_H
-
-#define VMALLOC_END		(AT91_VIRT_BASE & PGDIR_MASK)
-
-#endif
-- 
cgit v1.1


From d0760b3bc8ff9b34e3e2e166e2102548a24751b4 Mon Sep 17 00:00:00 2001
From: Andrew Victor <andrew@sanpeople.com>
Date: Thu, 8 Feb 2007 09:00:39 +0100
Subject: [ARM] 4143/1: AT91: Prepare for AT91SAM9263 support

The Atmel AT91SAM9263 processor includes many more integrated
peripherals than Atmel's previous ARM9-based AT91 processors, so this
has necessitated a few changes to the core AT91 support.

These changes are:
      * The system peripheral I/O region we remap has increased from
        0xFFFA0000..0xFFFFFFFF to 0xFFF78000..0xFFFFFFFF.
      * The increased I/O region forces changes to entry-macro.S and
        debug-macro.S due to ARM's limited immediate offset addressing
        modes.
      * Maximum number of GPIO banks increases to 5.
      * 2 MMC controllers so the board-setup code needs to specify which
        controller it wishes to use when calling at91_add_device_mmc().

Original patch from Nicolas Ferre.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/arch-at91/at91sam9260_matrix.h |  2 +-
 include/asm-arm/arch-at91/board.h              |  3 +-
 include/asm-arm/arch-at91/debug-macro.S        | 16 +++----
 include/asm-arm/arch-at91/entry-macro.S        | 10 ++---
 include/asm-arm/arch-at91/gpio.h               | 59 +++++++++++++++-----------
 include/asm-arm/arch-at91/hardware.h           |  8 ++--
 include/asm-arm/arch-at91/irqs.h               |  4 +-
 7 files changed, 56 insertions(+), 46 deletions(-)

(limited to 'include/asm-arm')

diff --git a/include/asm-arm/arch-at91/at91sam9260_matrix.h b/include/asm-arm/arch-at91/at91sam9260_matrix.h
index 573e97a..aacb1e9 100644
--- a/include/asm-arm/arch-at91/at91sam9260_matrix.h
+++ b/include/asm-arm/arch-at91/at91sam9260_matrix.h
@@ -18,7 +18,7 @@
 #define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
 #define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
 #define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
-#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x04)	/* Master Configuration Register 5 */
+#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x14)	/* Master Configuration Register 5 */
 #define		AT91_MATRIX_ULBT		(7 << 0)	/* Undefined Length Burst Type */
 #define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
 #define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
diff --git a/include/asm-arm/arch-at91/board.h b/include/asm-arm/arch-at91/board.h
index bf1afd0..7b9903c 100644
--- a/include/asm-arm/arch-at91/board.h
+++ b/include/asm-arm/arch-at91/board.h
@@ -60,7 +60,7 @@ struct at91_mmc_data {
 	u8		wp_pin;		/* (SD) writeprotect detect */
 	u8		vcc_pin;	/* power switching (high == on) */
 };
-extern void __init at91_add_device_mmc(struct at91_mmc_data *data);
+extern void __init at91_add_device_mmc(short mmc_id, struct at91_mmc_data *data);
 
  /* Ethernet */
 struct at91_eth_data {
@@ -76,6 +76,7 @@ extern void __init at91_add_device_eth(struct at91_eth_data *data);
  /* USB Host */
 struct at91_usbh_data {
 	u8		ports;		/* number of ports on root hub */
+	u8		vbus_pin[];	/* port power-control pin */
 };
 extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
 
diff --git a/include/asm-arm/arch-at91/debug-macro.S b/include/asm-arm/arch-at91/debug-macro.S
index 20721ef..13e9f5e 100644
--- a/include/asm-arm/arch-at91/debug-macro.S
+++ b/include/asm-arm/arch-at91/debug-macro.S
@@ -16,24 +16,24 @@
 
 	.macro	addruart,rx
 	mrc	p15, 0, \rx, c1, c0
-	tst	\rx, #1				@ MMU enabled?
-	ldreq	\rx, =AT91_BASE_SYS		@ System peripherals (phys address)
-	ldrne	\rx, =AT91_VA_BASE_SYS		@ System peripherals (virt address)
+	tst	\rx, #1						@ MMU enabled?
+	ldreq	\rx, =(AT91_BASE_SYS + AT91_DBGU)		@ System peripherals (phys address)
+	ldrne	\rx, =(AT91_VA_BASE_SYS	+ AT91_DBGU)		@ System peripherals (virt address)
 	.endm
 
 	.macro	senduart,rd,rx
-	strb	\rd, [\rx, #AT91_DBGU_THR]	@ Write to Transmitter Holding Register
+	strb	\rd, [\rx, #(AT91_DBGU_THR - AT91_DBGU)]	@ Write to Transmitter Holding Register
 	.endm
 
 	.macro	waituart,rd,rx
-1001:	ldr	\rd, [\rx, #AT91_DBGU_SR]	@ Read Status Register
-	tst	\rd, #AT91_DBGU_TXRDY		@ DBGU_TXRDY = 1 when ready to transmit
+1001:	ldr	\rd, [\rx, #(AT91_DBGU_SR - AT91_DBGU)]		@ Read Status Register
+	tst	\rd, #AT91_DBGU_TXRDY				@ DBGU_TXRDY = 1 when ready to transmit
 	beq	1001b
 	.endm
 
 	.macro	busyuart,rd,rx
-1001:	ldr	\rd, [\rx, #AT91_DBGU_SR]	@ Read Status Register
-	tst	\rd, #AT91_DBGU_TXEMPTY		@ DBGU_TXEMPTY = 1 when transmission complete
+1001:	ldr	\rd, [\rx, #(AT91_DBGU_SR - AT91_DBGU)]		@ Read Status Register
+	tst	\rd, #AT91_DBGU_TXEMPTY				@ DBGU_TXEMPTY = 1 when transmission complete
 	beq	1001b
 	.endm
 
diff --git a/include/asm-arm/arch-at91/entry-macro.S b/include/asm-arm/arch-at91/entry-macro.S
index a6f3383..76c8ccc 100644
--- a/include/asm-arm/arch-at91/entry-macro.S
+++ b/include/asm-arm/arch-at91/entry-macro.S
@@ -17,10 +17,10 @@
 	.endm
 
 	.macro	get_irqnr_and_base, irqnr, irqstat, base, tmp
-	ldr	\base, =(AT91_VA_BASE_SYS)		@ base virtual address of SYS peripherals
-	ldr	\irqnr, [\base, #AT91_AIC_IVR]		@ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
-	ldr	\irqstat, [\base, #AT91_AIC_ISR]	@ read interrupt source number
-	teq	\irqstat, #0				@ ISR is 0 when no current interrupt, or spurious interrupt
-	streq	\tmp, [\base, #AT91_AIC_EOICR]		@ not going to be handled further, then ACK it now.
+	ldr	\base, =(AT91_VA_BASE_SYS + AT91_AIC)		@ base virtual address of AIC peripheral
+	ldr	\irqnr, [\base, #(AT91_AIC_IVR - AT91_AIC)]	@ read IRQ vector register: de-asserts nIRQ to processor (and clears interrupt)
+	ldr	\irqstat, [\base, #(AT91_AIC_ISR - AT91_AIC)]	@ read interrupt source number
+	teq	\irqstat, #0					@ ISR is 0 when no current interrupt, or spurious interrupt
+	streq	\tmp, [\base, #(AT91_AIC_EOICR - AT91_AIC)]	@ not going to be handled further, then ACK it now.
 	.endm
 
diff --git a/include/asm-arm/arch-at91/gpio.h b/include/asm-arm/arch-at91/gpio.h
index 6d1a5eb..256f9b2 100644
--- a/include/asm-arm/arch-at91/gpio.h
+++ b/include/asm-arm/arch-at91/gpio.h
@@ -17,7 +17,7 @@
 
 #define PIN_BASE		NR_AIC_IRQS
 
-#define MAX_GPIO_BANKS		4
+#define MAX_GPIO_BANKS		5
 
 /* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */
 
@@ -26,37 +26,31 @@
 #define	AT91_PIN_PA2	(PIN_BASE + 0x00 + 2)
 #define	AT91_PIN_PA3	(PIN_BASE + 0x00 + 3)
 #define	AT91_PIN_PA4	(PIN_BASE + 0x00 + 4)
-
 #define	AT91_PIN_PA5	(PIN_BASE + 0x00 + 5)
 #define	AT91_PIN_PA6	(PIN_BASE + 0x00 + 6)
 #define	AT91_PIN_PA7	(PIN_BASE + 0x00 + 7)
 #define	AT91_PIN_PA8	(PIN_BASE + 0x00 + 8)
 #define	AT91_PIN_PA9	(PIN_BASE + 0x00 + 9)
-
 #define	AT91_PIN_PA10	(PIN_BASE + 0x00 + 10)
 #define	AT91_PIN_PA11	(PIN_BASE + 0x00 + 11)
 #define	AT91_PIN_PA12	(PIN_BASE + 0x00 + 12)
 #define	AT91_PIN_PA13	(PIN_BASE + 0x00 + 13)
 #define	AT91_PIN_PA14	(PIN_BASE + 0x00 + 14)
-
 #define	AT91_PIN_PA15	(PIN_BASE + 0x00 + 15)
 #define	AT91_PIN_PA16	(PIN_BASE + 0x00 + 16)
 #define	AT91_PIN_PA17	(PIN_BASE + 0x00 + 17)
 #define	AT91_PIN_PA18	(PIN_BASE + 0x00 + 18)
 #define	AT91_PIN_PA19	(PIN_BASE + 0x00 + 19)
-
 #define	AT91_PIN_PA20	(PIN_BASE + 0x00 + 20)
 #define	AT91_PIN_PA21	(PIN_BASE + 0x00 + 21)
 #define	AT91_PIN_PA22	(PIN_BASE + 0x00 + 22)
 #define	AT91_PIN_PA23	(PIN_BASE + 0x00 + 23)
 #define	AT91_PIN_PA24	(PIN_BASE + 0x00 + 24)
-
 #define	AT91_PIN_PA25	(PIN_BASE + 0x00 + 25)
 #define	AT91_PIN_PA26	(PIN_BASE + 0x00 + 26)
 #define	AT91_PIN_PA27	(PIN_BASE + 0x00 + 27)
 #define	AT91_PIN_PA28	(PIN_BASE + 0x00 + 28)
 #define	AT91_PIN_PA29	(PIN_BASE + 0x00 + 29)
-
 #define	AT91_PIN_PA30	(PIN_BASE + 0x00 + 30)
 #define	AT91_PIN_PA31	(PIN_BASE + 0x00 + 31)
 
@@ -65,37 +59,31 @@
 #define	AT91_PIN_PB2	(PIN_BASE + 0x20 + 2)
 #define	AT91_PIN_PB3	(PIN_BASE + 0x20 + 3)
 #define	AT91_PIN_PB4	(PIN_BASE + 0x20 + 4)
-
 #define	AT91_PIN_PB5	(PIN_BASE + 0x20 + 5)
 #define	AT91_PIN_PB6	(PIN_BASE + 0x20 + 6)
 #define	AT91_PIN_PB7	(PIN_BASE + 0x20 + 7)
 #define	AT91_PIN_PB8	(PIN_BASE + 0x20 + 8)
 #define	AT91_PIN_PB9	(PIN_BASE + 0x20 + 9)
-
 #define	AT91_PIN_PB10	(PIN_BASE + 0x20 + 10)
 #define	AT91_PIN_PB11	(PIN_BASE + 0x20 + 11)
 #define	AT91_PIN_PB12	(PIN_BASE + 0x20 + 12)
 #define	AT91_PIN_PB13	(PIN_BASE + 0x20 + 13)
 #define	AT91_PIN_PB14	(PIN_BASE + 0x20 + 14)
-
 #define	AT91_PIN_PB15	(PIN_BASE + 0x20 + 15)
 #define	AT91_PIN_PB16	(PIN_BASE + 0x20 + 16)
 #define	AT91_PIN_PB17	(PIN_BASE + 0x20 + 17)
 #define	AT91_PIN_PB18	(PIN_BASE + 0x20 + 18)
 #define	AT91_PIN_PB19	(PIN_BASE + 0x20 + 19)
-
 #define	AT91_PIN_PB20	(PIN_BASE + 0x20 + 20)
 #define	AT91_PIN_PB21	(PIN_BASE + 0x20 + 21)
 #define	AT91_PIN_PB22	(PIN_BASE + 0x20 + 22)
 #define	AT91_PIN_PB23	(PIN_BASE + 0x20 + 23)
 #define	AT91_PIN_PB24	(PIN_BASE + 0x20 + 24)
-
 #define	AT91_PIN_PB25	(PIN_BASE + 0x20 + 25)
 #define	AT91_PIN_PB26	(PIN_BASE + 0x20 + 26)
 #define	AT91_PIN_PB27	(PIN_BASE + 0x20 + 27)
 #define	AT91_PIN_PB28	(PIN_BASE + 0x20 + 28)
 #define	AT91_PIN_PB29	(PIN_BASE + 0x20 + 29)
-
 #define	AT91_PIN_PB30	(PIN_BASE + 0x20 + 30)
 #define	AT91_PIN_PB31	(PIN_BASE + 0x20 + 31)
 
@@ -104,37 +92,31 @@
 #define	AT91_PIN_PC2	(PIN_BASE + 0x40 + 2)
 #define	AT91_PIN_PC3	(PIN_BASE + 0x40 + 3)
 #define	AT91_PIN_PC4	(PIN_BASE + 0x40 + 4)
-
 #define	AT91_PIN_PC5	(PIN_BASE + 0x40 + 5)
 #define	AT91_PIN_PC6	(PIN_BASE + 0x40 + 6)
 #define	AT91_PIN_PC7	(PIN_BASE + 0x40 + 7)
 #define	AT91_PIN_PC8	(PIN_BASE + 0x40 + 8)
 #define	AT91_PIN_PC9	(PIN_BASE + 0x40 + 9)
-
 #define	AT91_PIN_PC10	(PIN_BASE + 0x40 + 10)
 #define	AT91_PIN_PC11	(PIN_BASE + 0x40 + 11)
 #define	AT91_PIN_PC12	(PIN_BASE + 0x40 + 12)
 #define	AT91_PIN_PC13	(PIN_BASE + 0x40 + 13)
 #define	AT91_PIN_PC14	(PIN_BASE + 0x40 + 14)
-
 #define	AT91_PIN_PC15	(PIN_BASE + 0x40 + 15)
 #define	AT91_PIN_PC16	(PIN_BASE + 0x40 + 16)
 #define	AT91_PIN_PC17	(PIN_BASE + 0x40 + 17)
 #define	AT91_PIN_PC18	(PIN_BASE + 0x40 + 18)
 #define	AT91_PIN_PC19	(PIN_BASE + 0x40 + 19)
-
 #define	AT91_PIN_PC20	(PIN_BASE + 0x40 + 20)
 #define	AT91_PIN_PC21	(PIN_BASE + 0x40 + 21)
 #define	AT91_PIN_PC22	(PIN_BASE + 0x40 + 22)
 #define	AT91_PIN_PC23	(PIN_BASE + 0x40 + 23)
 #define	AT91_PIN_PC24	(PIN_BASE + 0x40 + 24)
-
 #define	AT91_PIN_PC25	(PIN_BASE + 0x40 + 25)
 #define	AT91_PIN_PC26	(PIN_BASE + 0x40 + 26)
 #define	AT91_PIN_PC27	(PIN_BASE + 0x40 + 27)
 #define	AT91_PIN_PC28	(PIN_BASE + 0x40 + 28)
 #define	AT91_PIN_PC29	(PIN_BASE + 0x40 + 29)
-
 #define	AT91_PIN_PC30	(PIN_BASE + 0x40 + 30)
 #define	AT91_PIN_PC31	(PIN_BASE + 0x40 + 31)
 
@@ -143,40 +125,67 @@
 #define	AT91_PIN_PD2	(PIN_BASE + 0x60 + 2)
 #define	AT91_PIN_PD3	(PIN_BASE + 0x60 + 3)
 #define	AT91_PIN_PD4	(PIN_BASE + 0x60 + 4)
-
 #define	AT91_PIN_PD5	(PIN_BASE + 0x60 + 5)
 #define	AT91_PIN_PD6	(PIN_BASE + 0x60 + 6)
 #define	AT91_PIN_PD7	(PIN_BASE + 0x60 + 7)
 #define	AT91_PIN_PD8	(PIN_BASE + 0x60 + 8)
 #define	AT91_PIN_PD9	(PIN_BASE + 0x60 + 9)
-
 #define	AT91_PIN_PD10	(PIN_BASE + 0x60 + 10)
 #define	AT91_PIN_PD11	(PIN_BASE + 0x60 + 11)
 #define	AT91_PIN_PD12	(PIN_BASE + 0x60 + 12)
 #define	AT91_PIN_PD13	(PIN_BASE + 0x60 + 13)
 #define	AT91_PIN_PD14	(PIN_BASE + 0x60 + 14)
-
 #define	AT91_PIN_PD15	(PIN_BASE + 0x60 + 15)
 #define	AT91_PIN_PD16	(PIN_BASE + 0x60 + 16)
 #define	AT91_PIN_PD17	(PIN_BASE + 0x60 + 17)
 #define	AT91_PIN_PD18	(PIN_BASE + 0x60 + 18)
 #define	AT91_PIN_PD19	(PIN_BASE + 0x60 + 19)
-
 #define	AT91_PIN_PD20	(PIN_BASE + 0x60 + 20)
 #define	AT91_PIN_PD21	(PIN_BASE + 0x60 + 21)
 #define	AT91_PIN_PD22	(PIN_BASE + 0x60 + 22)
 #define	AT91_PIN_PD23	(PIN_BASE + 0x60 + 23)
 #define	AT91_PIN_PD24	(PIN_BASE + 0x60 + 24)
-
 #define	AT91_PIN_PD25	(PIN_BASE + 0x60 + 25)
 #define	AT91_PIN_PD26	(PIN_BASE + 0x60 + 26)
 #define	AT91_PIN_PD27	(PIN_BASE + 0x60 + 27)
 #define	AT91_PIN_PD28	(PIN_BASE + 0x60 + 28)
 #define	AT91_PIN_PD29	(PIN_BASE + 0x60 + 29)
-
 #define	AT91_PIN_PD30	(PIN_BASE + 0x60 + 30)
 #define	AT91_PIN_PD31	(PIN_BASE + 0x60 + 31)
 
+#define	AT91_PIN_PE0	(PIN_BASE + 0x80 + 0)
+#define	AT91_PIN_PE1	(PIN_BASE + 0x80 + 1)
+#define	AT91_PIN_PE2	(PIN_BASE + 0x80 + 2)
+#define	AT91_PIN_PE3	(PIN_BASE + 0x80 + 3)
+#define	AT91_PIN_PE4	(PIN_BASE + 0x80 + 4)
+#define	AT91_PIN_PE5	(PIN_BASE + 0x80 + 5)
+#define	AT91_PIN_PE6	(PIN_BASE + 0x80 + 6)
+#define	AT91_PIN_PE7	(PIN_BASE + 0x80 + 7)
+#define	AT91_PIN_PE8	(PIN_BASE + 0x80 + 8)
+#define	AT91_PIN_PE9	(PIN_BASE + 0x80 + 9)
+#define	AT91_PIN_PE10	(PIN_BASE + 0x80 + 10)
+#define	AT91_PIN_PE11	(PIN_BASE + 0x80 + 11)
+#define	AT91_PIN_PE12	(PIN_BASE + 0x80 + 12)
+#define	AT91_PIN_PE13	(PIN_BASE + 0x80 + 13)
+#define	AT91_PIN_PE14	(PIN_BASE + 0x80 + 14)
+#define	AT91_PIN_PE15	(PIN_BASE + 0x80 + 15)
+#define	AT91_PIN_PE16	(PIN_BASE + 0x80 + 16)
+#define	AT91_PIN_PE17	(PIN_BASE + 0x80 + 17)
+#define	AT91_PIN_PE18	(PIN_BASE + 0x80 + 18)
+#define	AT91_PIN_PE19	(PIN_BASE + 0x80 + 19)
+#define	AT91_PIN_PE20	(PIN_BASE + 0x80 + 20)
+#define	AT91_PIN_PE21	(PIN_BASE + 0x80 + 21)
+#define	AT91_PIN_PE22	(PIN_BASE + 0x80 + 22)
+#define	AT91_PIN_PE23	(PIN_BASE + 0x80 + 23)
+#define	AT91_PIN_PE24	(PIN_BASE + 0x80 + 24)
+#define	AT91_PIN_PE25	(PIN_BASE + 0x80 + 25)
+#define	AT91_PIN_PE26	(PIN_BASE + 0x80 + 26)
+#define	AT91_PIN_PE27	(PIN_BASE + 0x80 + 27)
+#define	AT91_PIN_PE28	(PIN_BASE + 0x80 + 28)
+#define	AT91_PIN_PE29	(PIN_BASE + 0x80 + 29)
+#define	AT91_PIN_PE30	(PIN_BASE + 0x80 + 30)
+#define	AT91_PIN_PE31	(PIN_BASE + 0x80 + 31)
+
 #ifndef __ASSEMBLY__
 /* setup setup routines, called from board init or driver probe() */
 extern int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup);
diff --git a/include/asm-arm/arch-at91/hardware.h b/include/asm-arm/arch-at91/hardware.h
index ccb7c72..1637fc4 100644
--- a/include/asm-arm/arch-at91/hardware.h
+++ b/include/asm-arm/arch-at91/hardware.h
@@ -28,15 +28,15 @@
 
 
 /*
- * Remap the peripherals from address 0xFFFA0000 .. 0xFFFFFFFF
- * to 0xFEFA0000 .. 0xFF000000.  (384Kb)
+ * Remap the peripherals from address 0xFFF78000 .. 0xFFFFFFFF
+ * to 0xFEF78000 .. 0xFF000000.  (5444Kb)
  */
-#define AT91_IO_PHYS_BASE	0xFFFA0000
+#define AT91_IO_PHYS_BASE	0xFFF78000
 #define AT91_IO_SIZE		(0xFFFFFFFF - AT91_IO_PHYS_BASE + 1)
 #define AT91_IO_VIRT_BASE	(0xFF000000 - AT91_IO_SIZE)
 
  /* Convert a physical IO address to virtual IO address */
-#define AT91_IO_P2V(x)	((x) - AT91_IO_PHYS_BASE + AT91_IO_VIRT_BASE)
+#define AT91_IO_P2V(x)		((x) - AT91_IO_PHYS_BASE + AT91_IO_VIRT_BASE)
 
 /*
  * Virtual to Physical Address mapping for IO devices.
diff --git a/include/asm-arm/arch-at91/irqs.h b/include/asm-arm/arch-at91/irqs.h
index f041c98..1ffa3bb 100644
--- a/include/asm-arm/arch-at91/irqs.h
+++ b/include/asm-arm/arch-at91/irqs.h
@@ -37,8 +37,8 @@
  * IRQ interrupt symbols are the AT91xxx_ID_* symbols
  * for IRQs handled directly through the AIC, or else the AT91_PIN_*
  * symbols in gpio.h for ones handled indirectly as GPIOs.
- * We make provision for 4 banks of GPIO.
+ * We make provision for 5 banks of GPIO.
  */
-#define	NR_IRQS		(NR_AIC_IRQS + (4 * 32))
+#define	NR_IRQS		(NR_AIC_IRQS + (5 * 32))
 
 #endif
-- 
cgit v1.1


From b2c6561605da4802886cafe96432b8e2968e9edc Mon Sep 17 00:00:00 2001
From: Andrew Victor <andrew@sanpeople.com>
Date: Thu, 8 Feb 2007 09:42:40 +0100
Subject: [ARM] 4145/2: AT91: Add support for AT91SAM9263 processor

Add support for the Atmel AT91SAM9263 processor.  It is similar to the
AT91SAM9260 but with more integrated peripherals, 5 GPIO banks, etc.

Original patch from Nicolas Ferre.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/arch-at91/at91sam9263.h        | 131 +++++++++++++++++++++++++
 include/asm-arm/arch-at91/at91sam9263_matrix.h | 129 ++++++++++++++++++++++++
 include/asm-arm/arch-at91/at91sam926x_mc.h     |   7 ++
 include/asm-arm/arch-at91/cpu.h                |   7 ++
 include/asm-arm/arch-at91/hardware.h           |   2 +
 include/asm-arm/arch-at91/timex.h              |   5 +
 6 files changed, 281 insertions(+)
 create mode 100644 include/asm-arm/arch-at91/at91sam9263.h
 create mode 100644 include/asm-arm/arch-at91/at91sam9263_matrix.h

(limited to 'include/asm-arm')

diff --git a/include/asm-arm/arch-at91/at91sam9263.h b/include/asm-arm/arch-at91/at91sam9263.h
new file mode 100644
index 0000000..f4af68a
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91sam9263.h
@@ -0,0 +1,131 @@
+/*
+ * include/asm-arm/arch-at91/at91sam9263.h
+ *
+ * (C) 2007 Atmel Corporation.
+ *
+ * Common definitions.
+ * Based on AT91SAM9263 datasheet revision B (Preliminary).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9263_H
+#define AT91SAM9263_H
+
+/*
+ * Peripheral identifiers/interrupts.
+ */
+#define AT91_ID_FIQ		0	/* Advanced Interrupt Controller (FIQ) */
+#define AT91_ID_SYS		1	/* System Peripherals */
+#define AT91SAM9263_ID_PIOA	2	/* Parallel IO Controller A */
+#define AT91SAM9263_ID_PIOB	3	/* Parallel IO Controller B */
+#define AT91SAM9263_ID_PIOCDE	4	/* Parallel IO Controller C, D and E */
+#define AT91SAM9263_ID_US0	7	/* USART 0 */
+#define AT91SAM9263_ID_US1	8	/* USART 1 */
+#define AT91SAM9263_ID_US2	9	/* USART 2 */
+#define AT91SAM9263_ID_MCI0	10	/* Multimedia Card Interface 0 */
+#define AT91SAM9263_ID_MCI1	11	/* Multimedia Card Interface 1 */
+#define AT91SAM9263_ID_CAN	12	/* CAN */
+#define AT91SAM9263_ID_TWI	13	/* Two-Wire Interface */
+#define AT91SAM9263_ID_SPI0	14	/* Serial Peripheral Interface 0 */
+#define AT91SAM9263_ID_SPI1	15	/* Serial Peripheral Interface 1 */
+#define AT91SAM9263_ID_SSC0	16	/* Serial Synchronous Controller 0 */
+#define AT91SAM9263_ID_SSC1	17	/* Serial Synchronous Controller 1 */
+#define AT91SAM9263_ID_AC97C	18	/* AC97 Controller */
+#define AT91SAM9263_ID_TCB	19	/* Timer Counter 0, 1 and 2 */
+#define AT91SAM9263_ID_PWMC	20	/* Pulse Width Modulation Controller */
+#define AT91SAM9263_ID_EMAC	21	/* Ethernet */
+#define AT91SAM9263_ID_2DGE	23	/* 2D Graphic Engine */
+#define AT91SAM9263_ID_UDP	24	/* USB Device Port */
+#define AT91SAM9263_ID_ISI	25	/* Image Sensor Interface */
+#define AT91SAM9263_ID_LCDC	26	/* LCD Controller */
+#define AT91SAM9263_ID_DMA	27	/* DMA Controller */
+#define AT91SAM9263_ID_UHP	29	/* USB Host port */
+#define AT91SAM9263_ID_IRQ0	30	/* Advanced Interrupt Controller (IRQ0) */
+#define AT91SAM9263_ID_IRQ1	31	/* Advanced Interrupt Controller (IRQ1) */
+
+
+/*
+ * User Peripheral physical base addresses.
+ */
+#define AT91SAM9263_BASE_UDP		0xfff78000
+#define AT91SAM9263_BASE_TCB0		0xfff7c000
+#define AT91SAM9263_BASE_TC0		0xfff7c000
+#define AT91SAM9263_BASE_TC1		0xfff7c040
+#define AT91SAM9263_BASE_TC2		0xfff7c080
+#define AT91SAM9263_BASE_MCI0		0xfff80000
+#define AT91SAM9263_BASE_MCI1		0xfff84000
+#define AT91SAM9263_BASE_TWI		0xfff88000
+#define AT91SAM9263_BASE_US0		0xfff8c000
+#define AT91SAM9263_BASE_US1		0xfff90000
+#define AT91SAM9263_BASE_US2		0xfff94000
+#define AT91SAM9263_BASE_SSC0		0xfff98000
+#define AT91SAM9263_BASE_SSC1		0xfff9c000
+#define AT91SAM9263_BASE_AC97C		0xfffa0000
+#define AT91SAM9263_BASE_SPI0		0xfffa4000
+#define AT91SAM9263_BASE_SPI1		0xfffa8000
+#define AT91SAM9263_BASE_CAN		0xfffac000
+#define AT91SAM9263_BASE_PWMC		0xfffb8000
+#define AT91SAM9263_BASE_EMAC		0xfffbc000
+#define AT91SAM9263_BASE_ISI		0xfffc4000
+#define AT91SAM9263_BASE_2DGE		0xfffc8000
+#define AT91_BASE_SYS			0xffffe000
+
+/*
+ * System Peripherals (offset from AT91_BASE_SYS)
+ */
+#define AT91_ECC0	(0xffffe000 - AT91_BASE_SYS)
+#define AT91_SDRAMC0	(0xffffe200 - AT91_BASE_SYS)
+#define AT91_SMC0	(0xffffe400 - AT91_BASE_SYS)
+#define AT91_ECC1	(0xffffe600 - AT91_BASE_SYS)
+#define AT91_SDRAMC1	(0xffffe800 - AT91_BASE_SYS)
+#define AT91_SMC1	(0xffffea00 - AT91_BASE_SYS)
+#define AT91_MATRIX	(0xffffec00 - AT91_BASE_SYS)
+#define AT91_CCFG	(0xffffed10 - AT91_BASE_SYS)
+#define AT91_DBGU	(0xffffee00 - AT91_BASE_SYS)
+#define AT91_AIC	(0xfffff000 - AT91_BASE_SYS)
+#define AT91_PIOA	(0xfffff200 - AT91_BASE_SYS)
+#define AT91_PIOB	(0xfffff400 - AT91_BASE_SYS)
+#define AT91_PIOC	(0xfffff600 - AT91_BASE_SYS)
+#define AT91_PIOD	(0xfffff800 - AT91_BASE_SYS)
+#define AT91_PIOE	(0xfffffa00 - AT91_BASE_SYS)
+#define AT91_PMC	(0xfffffc00 - AT91_BASE_SYS)
+#define AT91_RSTC	(0xfffffd00 - AT91_BASE_SYS)
+#define AT91_SHDWC	(0xfffffd10 - AT91_BASE_SYS)
+#define AT91_RTT0	(0xfffffd20 - AT91_BASE_SYS)
+#define AT91_PIT	(0xfffffd30 - AT91_BASE_SYS)
+#define AT91_WDT	(0xfffffd40 - AT91_BASE_SYS)
+#define AT91_RTT1	(0xfffffd50 - AT91_BASE_SYS)
+#define AT91_GPBR	(0xfffffd60 - AT91_BASE_SYS)
+
+#define AT91_SMC	AT91_SMC0
+
+/*
+ * Internal Memory.
+ */
+#define AT91SAM9263_SRAM0_BASE	0x00300000	/* Internal SRAM 0 base address */
+#define AT91SAM9263_SRAM0_SIZE	(80 * SZ_1K)	/* Internal SRAM 0 size (80Kb) */
+
+#define AT91SAM9263_ROM_BASE	0x00400000	/* Internal ROM base address */
+#define AT91SAM9263_ROM_SIZE	SZ_128K		/* Internal ROM size (128Kb) */
+
+#define AT91SAM9263_SRAM1_BASE	0x00500000	/* Internal SRAM 1 base address */
+#define AT91SAM9263_SRAM1_SIZE	SZ_16K		/* Internal SRAM 1 size (16Kb) */
+
+#define AT91SAM9263_LCDC_BASE	0x00700000	/* LCD Controller */
+#define AT91SAM9263_DMAC_BASE	0x00800000	/* DMA Controller */
+#define AT91SAM9263_UHP_BASE	0x00a00000	/* USB Host controller */
+
+#if 0
+/*
+ * PIO pin definitions (peripheral A/B multiplexing).
+ */
+
+// TODO: Add
+
+#endif
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91sam9263_matrix.h b/include/asm-arm/arch-at91/at91sam9263_matrix.h
new file mode 100644
index 0000000..6fc6e4b
--- /dev/null
+++ b/include/asm-arm/arch-at91/at91sam9263_matrix.h
@@ -0,0 +1,129 @@
+/*
+ * include/asm-arm/arch-at91/at91sam9263_matrix.h
+ *
+ *  Copyright (C) 2006 Atmel Corporation.
+ *
+ * Memory Controllers (MATRIX, EBI) - System peripherals registers.
+ * Based on AT91SAM9263 datasheet revision B (Preliminary).
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9263_MATRIX_H
+#define AT91SAM9263_MATRIX_H
+
+#define AT91_MATRIX_MCFG0	(AT91_MATRIX + 0x00)	/* Master Configuration Register 0 */
+#define AT91_MATRIX_MCFG1	(AT91_MATRIX + 0x04)	/* Master Configuration Register 1 */
+#define AT91_MATRIX_MCFG2	(AT91_MATRIX + 0x08)	/* Master Configuration Register 2 */
+#define AT91_MATRIX_MCFG3	(AT91_MATRIX + 0x0C)	/* Master Configuration Register 3 */
+#define AT91_MATRIX_MCFG4	(AT91_MATRIX + 0x10)	/* Master Configuration Register 4 */
+#define AT91_MATRIX_MCFG5	(AT91_MATRIX + 0x14)	/* Master Configuration Register 5 */
+#define AT91_MATRIX_MCFG6	(AT91_MATRIX + 0x18)	/* Master Configuration Register 6 */
+#define AT91_MATRIX_MCFG7	(AT91_MATRIX + 0x1C)	/* Master Configuration Register 7 */
+#define AT91_MATRIX_MCFG8	(AT91_MATRIX + 0x20)	/* Master Configuration Register 8 */
+#define		AT91_MATRIX_ULBT	(7 << 0)	/* Undefined Length Burst Type */
+#define			AT91_MATRIX_ULBT_INFINITE	(0 << 0)
+#define			AT91_MATRIX_ULBT_SINGLE		(1 << 0)
+#define			AT91_MATRIX_ULBT_FOUR		(2 << 0)
+#define			AT91_MATRIX_ULBT_EIGHT		(3 << 0)
+#define			AT91_MATRIX_ULBT_SIXTEEN	(4 << 0)
+
+#define AT91_MATRIX_SCFG0	(AT91_MATRIX + 0x40)	/* Slave Configuration Register 0 */
+#define AT91_MATRIX_SCFG1	(AT91_MATRIX + 0x44)	/* Slave Configuration Register 1 */
+#define AT91_MATRIX_SCFG2	(AT91_MATRIX + 0x48)	/* Slave Configuration Register 2 */
+#define AT91_MATRIX_SCFG3	(AT91_MATRIX + 0x4C)	/* Slave Configuration Register 3 */
+#define AT91_MATRIX_SCFG4	(AT91_MATRIX + 0x50)	/* Slave Configuration Register 4 */
+#define AT91_MATRIX_SCFG5	(AT91_MATRIX + 0x54)	/* Slave Configuration Register 5 */
+#define AT91_MATRIX_SCFG6	(AT91_MATRIX + 0x58)	/* Slave Configuration Register 6 */
+#define AT91_MATRIX_SCFG7	(AT91_MATRIX + 0x5C)	/* Slave Configuration Register 7 */
+#define		AT91_MATRIX_SLOT_CYCLE		(0xff << 0)	/* Maximum Number of Allowed Cycles for a Burst */
+#define		AT91_MATRIX_DEFMSTR_TYPE	(3    << 16)	/* Default Master Type */
+#define			AT91_MATRIX_DEFMSTR_TYPE_NONE	(0 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_LAST	(1 << 16)
+#define			AT91_MATRIX_DEFMSTR_TYPE_FIXED	(2 << 16)
+#define		AT91_MATRIX_FIXED_DEFMSTR	(7    << 18)	/* Fixed Index of Default Master */
+#define		AT91_MATRIX_ARBT		(3    << 24)	/* Arbitration Type */
+#define			AT91_MATRIX_ARBT_ROUND_ROBIN	(0 << 24)
+#define			AT91_MATRIX_ARBT_FIXED_PRIORITY	(1 << 24)
+
+#define AT91_MATRIX_PRAS0	(AT91_MATRIX + 0x80)	/* Priority Register A for Slave 0 */
+#define AT91_MATRIX_PRBS0	(AT91_MATRIX + 0x84)	/* Priority Register B for Slave 0 */
+#define AT91_MATRIX_PRAS1	(AT91_MATRIX + 0x88)	/* Priority Register A for Slave 1 */
+#define AT91_MATRIX_PRBS1	(AT91_MATRIX + 0x8C)	/* Priority Register B for Slave 1 */
+#define AT91_MATRIX_PRAS2	(AT91_MATRIX + 0x90)	/* Priority Register A for Slave 2 */
+#define AT91_MATRIX_PRBS2	(AT91_MATRIX + 0x94)	/* Priority Register B for Slave 2 */
+#define AT91_MATRIX_PRAS3	(AT91_MATRIX + 0x98)	/* Priority Register A for Slave 3 */
+#define AT91_MATRIX_PRBS3	(AT91_MATRIX + 0x9C)	/* Priority Register B for Slave 3 */
+#define AT91_MATRIX_PRAS4	(AT91_MATRIX + 0xA0)	/* Priority Register A for Slave 4 */
+#define AT91_MATRIX_PRBS4	(AT91_MATRIX + 0xA4)	/* Priority Register B for Slave 4 */
+#define AT91_MATRIX_PRAS5	(AT91_MATRIX + 0xA8)	/* Priority Register A for Slave 5 */
+#define AT91_MATRIX_PRBS5	(AT91_MATRIX + 0xAC)	/* Priority Register B for Slave 5 */
+#define AT91_MATRIX_PRAS6	(AT91_MATRIX + 0xB0)	/* Priority Register A for Slave 6 */
+#define AT91_MATRIX_PRBS6	(AT91_MATRIX + 0xB4)	/* Priority Register B for Slave 6 */
+#define AT91_MATRIX_PRAS7	(AT91_MATRIX + 0xB8)	/* Priority Register A for Slave 7 */
+#define AT91_MATRIX_PRBS7	(AT91_MATRIX + 0xBC)	/* Priority Register B for Slave 7 */
+#define		AT91_MATRIX_M0PR		(3 << 0)	/* Master 0 Priority */
+#define		AT91_MATRIX_M1PR		(3 << 4)	/* Master 1 Priority */
+#define		AT91_MATRIX_M2PR		(3 << 8)	/* Master 2 Priority */
+#define		AT91_MATRIX_M3PR		(3 << 12)	/* Master 3 Priority */
+#define		AT91_MATRIX_M4PR		(3 << 16)	/* Master 4 Priority */
+#define		AT91_MATRIX_M5PR		(3 << 20)	/* Master 5 Priority */
+#define		AT91_MATRIX_M6PR		(3 << 24)	/* Master 6 Priority */
+#define		AT91_MATRIX_M7PR		(3 << 28)	/* Master 7 Priority */
+#define		AT91_MATRIX_M8PR		(3 << 0)	/* Master 8 Priority (in Register B) */
+
+#define AT91_MATRIX_MRCR	(AT91_MATRIX + 0x100)	/* Master Remap Control Register */
+#define		AT91_MATRIX_RCB0		(1 << 0)	/* Remap Command for AHB Master 0 (ARM926EJ-S Instruction Master) */
+#define		AT91_MATRIX_RCB1		(1 << 1)	/* Remap Command for AHB Master 1 (ARM926EJ-S Data Master) */
+#define		AT91_MATRIX_RCB2		(1 << 2)
+#define		AT91_MATRIX_RCB3		(1 << 3)
+#define		AT91_MATRIX_RCB4		(1 << 4)
+#define		AT91_MATRIX_RCB5		(1 << 5)
+#define		AT91_MATRIX_RCB6		(1 << 6)
+#define		AT91_MATRIX_RCB7		(1 << 7)
+#define		AT91_MATRIX_RCB8		(1 << 8)
+
+#define AT91_MATRIX_TCMR	(AT91_MATRIX + 0x114)	/* TCM Configuration Register */
+#define		AT91_MATRIX_ITCM_SIZE		(0xf << 0)	/* Size of ITCM enabled memory block */
+#define			AT91_MATRIX_ITCM_0		(0 << 0)
+#define			AT91_MATRIX_ITCM_16		(5 << 0)
+#define			AT91_MATRIX_ITCM_32		(6 << 0)
+#define		AT91_MATRIX_DTCM_SIZE		(0xf << 4)	/* Size of DTCM enabled memory block */
+#define			AT91_MATRIX_DTCM_0		(0 << 4)
+#define			AT91_MATRIX_DTCM_16		(5 << 4)
+#define			AT91_MATRIX_DTCM_32		(6 << 4)
+
+#define AT91_MATRIX_EBI0CSA	(AT91_MATRIX + 0x120)	/* EBI0 Chip Select Assignment Register */
+#define		AT91_MATRIX_EBI0_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
+#define			AT91_MATRIX_EBI0_CS1A_SMC		(0 << 1)
+#define			AT91_MATRIX_EBI0_CS1A_SDRAMC		(1 << 1)
+#define		AT91_MATRIX_EBI0_CS3A		(1 << 3)	/* Chip Select 3 Assignment */
+#define			AT91_MATRIX_EBI0_CS3A_SMC		(0 << 3)
+#define			AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA	(1 << 3)
+#define		AT91_MATRIX_EBI0_CS4A		(1 << 4)	/* Chip Select 4 Assignment */
+#define			AT91_MATRIX_EBI0_CS4A_SMC		(0 << 4)
+#define			AT91_MATRIX_EBI0_CS4A_SMC_CF1		(1 << 4)
+#define		AT91_MATRIX_EBI0_CS5A		(1 << 5)	/* Chip Select 5 Assignment */
+#define			AT91_MATRIX_EBI0_CS5A_SMC		(0 << 5)
+#define			AT91_MATRIX_EBI0_CS5A_SMC_CF2		(1 << 5)
+#define		AT91_MATRIX_EBI0_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
+#define		AT91_MATRIX_EBI0_VDDIOMSEL	(1 << 16)	/* Memory voltage selection */
+#define			AT91_MATRIX_EBI0_VDDIOMSEL_1_8V		(0 << 16)
+#define			AT91_MATRIX_EBI0_VDDIOMSEL_3_3V		(1 << 16)
+
+#define AT91_MATRIX_EBI1CSA	(AT91_MATRIX + 0x124)	/* EBI1 Chip Select Assignment Register */
+#define		AT91_MATRIX_EBI1_CS1A		(1 << 1)	/* Chip Select 1 Assignment */
+#define			AT91_MATRIX_EBI1_CS1A_SMC		(0 << 1)
+#define			AT91_MATRIX_EBI1_CS1A_SDRAMC		(1 << 1)
+#define		AT91_MATRIX_EBI1_CS2A		(1 << 3)	/* Chip Select 3 Assignment */
+#define			AT91_MATRIX_EBI1_CS2A_SMC		(0 << 3)
+#define			AT91_MATRIX_EBI1_CS2A_SMC_SMARTMEDIA	(1 << 3)
+#define		AT91_MATRIX_EBI1_DBPUC		(1 << 8)	/* Data Bus Pull-up Configuration */
+#define		AT91_MATRIX_EBI1_VDDIOMSEL	(1 << 16)	/* Memory voltage selection */
+#define			AT91_MATRIX_EBI1_VDDIOMSEL_1_8V		(0 << 16)
+#define			AT91_MATRIX_EBI1_VDDIOMSEL_3_3V		(1 << 16)
+
+#endif
diff --git a/include/asm-arm/arch-at91/at91sam926x_mc.h b/include/asm-arm/arch-at91/at91sam926x_mc.h
index 355eee6..d82631c 100644
--- a/include/asm-arm/arch-at91/at91sam926x_mc.h
+++ b/include/asm-arm/arch-at91/at91sam926x_mc.h
@@ -131,4 +131,11 @@
 #define			AT91_SMC_PS_16			(2 << 28)
 #define			AT91_SMC_PS_32			(3 << 28)
 
+#if defined(AT91_SMC1)		/* The AT91SAM9263 has 2 Static Memory contollers */
+#define AT91_SMC1_SETUP(n)	(AT91_SMC1 + 0x00 + ((n)*0x10))	/* Setup Register for CS n */
+#define AT91_SMC1_PULSE(n)	(AT91_SMC1 + 0x04 + ((n)*0x10))	/* Pulse Register for CS n */
+#define AT91_SMC1_CYCLE(n)	(AT91_SMC1 + 0x08 + ((n)*0x10))	/* Cycle Register for CS n */
+#define AT91_SMC1_MODE(n)	(AT91_SMC1 + 0x0c + ((n)*0x10))	/* Mode Register for CS n */
+#endif
+
 #endif
diff --git a/include/asm-arm/arch-at91/cpu.h b/include/asm-arm/arch-at91/cpu.h
index 762eb41..9efde0d 100644
--- a/include/asm-arm/arch-at91/cpu.h
+++ b/include/asm-arm/arch-at91/cpu.h
@@ -20,6 +20,7 @@
 #define ARCH_ID_AT91RM9200	0x09290780
 #define ARCH_ID_AT91SAM9260	0x019803a0
 #define ARCH_ID_AT91SAM9261	0x019703a0
+#define ARCH_ID_AT91SAM9263	0x019607a0
 
 
 static inline unsigned long at91_cpu_identify(void)
@@ -46,4 +47,10 @@ static inline unsigned long at91_cpu_identify(void)
 #define cpu_is_at91sam9261()	(0)
 #endif
 
+#ifdef CONFIG_ARCH_AT91SAM9263
+#define cpu_is_at91sam9263()	(at91_cpu_identify() == ARCH_ID_AT91SAM9263)
+#else
+#define cpu_is_at91sam9263()	(0)
+#endif
+
 #endif
diff --git a/include/asm-arm/arch-at91/hardware.h b/include/asm-arm/arch-at91/hardware.h
index 1637fc4..eaaf1c1 100644
--- a/include/asm-arm/arch-at91/hardware.h
+++ b/include/asm-arm/arch-at91/hardware.h
@@ -22,6 +22,8 @@
 #include <asm/arch/at91sam9260.h>
 #elif defined(CONFIG_ARCH_AT91SAM9261)
 #include <asm/arch/at91sam9261.h>
+#elif defined(CONFIG_ARCH_AT91SAM9263)
+#include <asm/arch/at91sam9263.h>
 #else
 #error "Unsupported AT91 processor"
 #endif
diff --git a/include/asm-arm/arch-at91/timex.h b/include/asm-arm/arch-at91/timex.h
index b24e364..f41636d 100644
--- a/include/asm-arm/arch-at91/timex.h
+++ b/include/asm-arm/arch-at91/timex.h
@@ -32,6 +32,11 @@
 #define AT91SAM9_MASTER_CLOCK	99300000
 #define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
 
+#elif defined(CONFIG_ARCH_AT91SAM9263)
+
+#define AT91SAM9_MASTER_CLOCK	99959500
+#define CLOCK_TICK_RATE		(AT91SAM9_MASTER_CLOCK/16)
+
 #endif
 
 #endif
-- 
cgit v1.1


From 32f3f49910c7e228839c1cd144dbed8da342703b Mon Sep 17 00:00:00 2001
From: Milan Svoboda <msvoboda@ra.rockwell.com>
Date: Wed, 7 Feb 2007 08:43:35 +0100
Subject: [ARM] 4141/1: consolidate functions that handles gpio in pxa2xx_udc

This patch renames pxa_gpio_set/get functions defined in drivers/usb/gadget/pxa2xx_udc.h to udc_gpio_set/get.

These functions are moved from drivers/usb/gadget/pxa2xx_udc.h to include/asm-arm/arch-pxa2xx/udc.h

Creates new functions: udc_gpio_to_irq, udc_gpio_init_vbus, udc_gpio_init_pullup in include/asm-arm/arch-pxa2xx/udc.h. These functions are used in drivers/usb/gadget/pxa2xx_udc.c instead of direct low-level (pxa2xx only) functions.

Creates all these udc_gpio_* functions in include/asm-arm/arch-ixp4xx/udc.h. This implementation has no real code because ixp4xx doesn't use vbus - only vbus uses all these gpio functions (and because ixp4xx misses any function which converts number of gpio pin into it's irq).

This is next step to make pxa2xx_udc fully work on ixp4xx platform.

Signed-off-by: Milan Svoboda <msvoboda@ra.rockwell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/arch-ixp4xx/udc.h | 22 ++++++++++++++++++++++
 include/asm-arm/arch-pxa/udc.h    | 30 ++++++++++++++++++++++++++++++
 2 files changed, 52 insertions(+)

(limited to 'include/asm-arm')

diff --git a/include/asm-arm/arch-ixp4xx/udc.h b/include/asm-arm/arch-ixp4xx/udc.h
index dbdec36f..79b850a 100644
--- a/include/asm-arm/arch-ixp4xx/udc.h
+++ b/include/asm-arm/arch-ixp4xx/udc.h
@@ -6,3 +6,25 @@
 
 extern void ixp4xx_set_udc_info(struct pxa2xx_udc_mach_info *info);
 
+static inline int udc_gpio_to_irq(unsigned gpio)
+{
+	return 0;
+}
+
+static inline void udc_gpio_init_vbus(unsigned gpio)
+{
+}
+
+static inline void udc_gpio_init_pullup(unsigned gpio)
+{
+}
+
+static inline int udc_gpio_get(unsigned gpio)
+{
+	return 0;
+}
+
+static inline void udc_gpio_set(unsigned gpio, int is_on)
+{
+}
+
diff --git a/include/asm-arm/arch-pxa/udc.h b/include/asm-arm/arch-pxa/udc.h
index 646480d..8bc6f9c 100644
--- a/include/asm-arm/arch-pxa/udc.h
+++ b/include/asm-arm/arch-pxa/udc.h
@@ -9,3 +9,33 @@
 
 extern void pxa_set_udc_info(struct pxa2xx_udc_mach_info *info);
 
+static inline int udc_gpio_to_irq(unsigned gpio)
+{
+	return IRQ_GPIO(gpio & GPIO_MD_MASK_NR);
+}
+
+static inline void udc_gpio_init_vbus(unsigned gpio)
+{
+	pxa_gpio_mode((gpio & GPIO_MD_MASK_NR) | GPIO_IN);
+}
+
+static inline void udc_gpio_init_pullup(unsigned gpio)
+{
+	pxa_gpio_mode((gpio & GPIO_MD_MASK_NR) | GPIO_OUT | GPIO_DFLT_LOW);
+}
+
+static inline int udc_gpio_get(unsigned gpio)
+{
+	return (GPLR(gpio) & GPIO_bit(gpio)) != 0;
+}
+
+static inline void udc_gpio_set(unsigned gpio, int is_on)
+{
+	int mask = GPIO_bit(gpio);
+
+	if (is_on)
+		GPSR(gpio) = mask;
+	else
+		GPCR(gpio) = mask;
+}
+
-- 
cgit v1.1


From 93a3ddc201c501146c896d598deb61f3abbe4ab0 Mon Sep 17 00:00:00 2001
From: Andrew Victor <andrew@sanpeople.com>
Date: Thu, 8 Feb 2007 11:31:22 +0100
Subject: [ARM] 4151/1: AT91 / AVR32: Move at91_pdc.h to linux/atmel_pdc.h

The Atmel AT91 and AVR32 processor architectures share many of the same
peripherals.  The PDC (Peripheral Data Controller) registers are also
implemented within in a number of the on-chip peripherals (eg, USART,
MMC, SPI, SSC, etc).

In a attempt not to duplicate the register definitions in each
peripheral, or in each architecture, the at91_pdc.h header in
asm-arm/arch-at91 and asm-avr32/arch-at32ap has been replaced with
linux/atmel_pdc.h.

The definitions have also been renamed from AT91_PDC_* to ATMEL_PDC_*,
and the drivers updated accordingly.

Original patch from Nicolas Ferre.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Acked-by: Haavard Skinnemoen <hskinnemoen@atmel.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/arch-at91/at91_pdc.h | 36 ------------------------------------
 1 file changed, 36 deletions(-)
 delete mode 100644 include/asm-arm/arch-at91/at91_pdc.h

(limited to 'include/asm-arm')

diff --git a/include/asm-arm/arch-at91/at91_pdc.h b/include/asm-arm/arch-at91/at91_pdc.h
deleted file mode 100644
index a54adf5..0000000
--- a/include/asm-arm/arch-at91/at91_pdc.h
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * include/asm-arm/arch-at91/at91_pdc.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Peripheral Data Controller (PDC) registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_PDC_H
-#define AT91_PDC_H
-
-#define AT91_PDC_RPR		0x100	/* Receive Pointer Register */
-#define AT91_PDC_RCR		0x104	/* Receive Counter Register */
-#define AT91_PDC_TPR		0x108	/* Transmit Pointer Register */
-#define AT91_PDC_TCR		0x10c	/* Transmit Counter Register */
-#define AT91_PDC_RNPR		0x110	/* Receive Next Pointer Register */
-#define AT91_PDC_RNCR		0x114	/* Receive Next Counter Register */
-#define AT91_PDC_TNPR		0x118	/* Transmit Next Pointer Register */
-#define AT91_PDC_TNCR		0x11c	/* Transmit Next Counter Register */
-
-#define AT91_PDC_PTCR		0x120	/* Transfer Control Register */
-#define		AT91_PDC_RXTEN		(1 << 0)	/* Receiver Transfer Enable */
-#define		AT91_PDC_RXTDIS		(1 << 1)	/* Receiver Transfer Disable */
-#define		AT91_PDC_TXTEN		(1 << 8)	/* Transmitter Transfer Enable */
-#define		AT91_PDC_TXTDIS		(1 << 9)	/* Transmitter Transfer Disable */
-
-#define AT91_PDC_PTSR		0x124	/* Transfer Status Register */
-
-#endif
-- 
cgit v1.1


From 108d093fdd75643dfc8c327f38125f4da76771e7 Mon Sep 17 00:00:00 2001
From: Liam Girdwood <Liam.Girdwood@wolfsonmicro.com>
Date: Thu, 8 Feb 2007 16:23:29 +0100
Subject: [ARM] 4152/1: Add PXA SSP audio register defs and fixups

This patchs adds some missing register bit defs for the PXA SSP ports audio registers and fixes up some other broken bit definitions as noticed by Russell.

Signed-off-by: Liam Girdwood <liam.girdwood@wolfsonmicro.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/arch-pxa/pxa-regs.h | 19 +++++++++++--------
 1 file changed, 11 insertions(+), 8 deletions(-)

(limited to 'include/asm-arm')

diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h
index e24f6b6..20576d10 100644
--- a/include/asm-arm/arch-pxa/pxa-regs.h
+++ b/include/asm-arm/arch-pxa/pxa-regs.h
@@ -474,8 +474,8 @@
 #define SADIV		__REG(0x40400060)  /* Audio Clock Divider Register. */
 #define SADR		__REG(0x40400080)  /* Serial Audio Data Register (TX and RX FIFO access Register). */
 
-#define SACR0_RFTH(x)	(x << 12)	/* Rx FIFO Interrupt or DMA Trigger Threshold */
-#define SACR0_TFTH(x)	(x << 8)	/* Tx FIFO Interrupt or DMA Trigger Threshold */
+#define SACR0_RFTH(x)	((x) << 12)	/* Rx FIFO Interrupt or DMA Trigger Threshold */
+#define SACR0_TFTH(x)	((x) << 8)	/* Tx FIFO Interrupt or DMA Trigger Threshold */
 #define SACR0_STRF	(1 << 5)	/* FIFO Select for EFWR Special Function */
 #define SACR0_EFWR	(1 << 4)	/* Enable EFWR Function  */
 #define SACR0_RST	(1 << 3)	/* FIFO, i2s Register Reset */
@@ -1682,15 +1682,18 @@
 #define SSSR_PINT		(1 << 18)	/* Peripheral Trailing Byte Interrupt */
 
 #define SSPSP_FSRT		(1 << 25)	/* Frame Sync Relative Timing */
-#define SSPSP_DMYSTOP(x)	(x << 23)	/* Dummy Stop */
-#define SSPSP_SFRMWDTH(x)	(x << 16)	/* Serial Frame Width */
-#define SSPSP_SFRMDLY(x)	(x << 9)	/* Serial Frame Delay */
-#define SSPSP_DMYSTRT(x)	(x << 7)	/* Dummy Start */
-#define SSPSP_STRTDLY(x)	(x << 4)	/* Start Delay */
+#define SSPSP_DMYSTOP(x)	((x) << 23)	/* Dummy Stop */
+#define SSPSP_SFRMWDTH(x)	((x) << 16)	/* Serial Frame Width */
+#define SSPSP_SFRMDLY(x)	((x) << 9)	/* Serial Frame Delay */
+#define SSPSP_DMYSTRT(x)	((x) << 7)	/* Dummy Start */
+#define SSPSP_STRTDLY(x)	((x) << 4)	/* Start Delay */
 #define SSPSP_ETDS			(1 << 3)	/* End of Transfer data State */
 #define SSPSP_SFRMP			(1 << 2)	/* Serial Frame Polarity */
-#define SSPSP_SCMODE(x)		(x << 0)	/* Serial Bit Rate Clock Mode */
+#define SSPSP_SCMODE(x)		((x) << 0)	/* Serial Bit Rate Clock Mode */
 
+#define SSACD_SCDB		(1 << 3)	/* SSPSYSCLK Divider Bypass */
+#define SSACD_ACPS(x)		((x) << 4)	/* Audio clock PLL select */
+#define SSACD_ACDS(x)		((x) << 0)	/* Audio clock divider select */
 
 #define SSCR0_P1	__REG(0x41000000)  /* SSP Port 1 Control Register 0 */
 #define SSCR1_P1	__REG(0x41000004)  /* SSP Port 1 Control Register 1 */
-- 
cgit v1.1


From 382266ad5ad4119ec12df889afa5062a0a0cd6ae Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Mon, 5 Feb 2007 14:48:19 +0100
Subject: [ARM] 4135/1: Add support for the L210/L220 cache controllers

This patch adds the support for the L210/L220 (outer) cache
controller. The cache range operations are done by index/way since L2
cache controller only accepts physical addresses.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/hardware/cache-l2x0.h | 56 +++++++++++++++++++++++++++++++++++
 1 file changed, 56 insertions(+)
 create mode 100644 include/asm-arm/hardware/cache-l2x0.h

(limited to 'include/asm-arm')

diff --git a/include/asm-arm/hardware/cache-l2x0.h b/include/asm-arm/hardware/cache-l2x0.h
new file mode 100644
index 0000000..54029a7
--- /dev/null
+++ b/include/asm-arm/hardware/cache-l2x0.h
@@ -0,0 +1,56 @@
+/*
+ * include/asm-arm/hardware/cache-l2x0.h
+ *
+ * Copyright (C) 2007 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifndef __ASM_ARM_HARDWARE_L2X0_H
+#define __ASM_ARM_HARDWARE_L2X0_H
+
+#define L2X0_CACHE_ID			0x000
+#define L2X0_CACHE_TYPE			0x004
+#define L2X0_CTRL			0x100
+#define L2X0_AUX_CTRL			0x104
+#define L2X0_EVENT_CNT_CTRL		0x200
+#define L2X0_EVENT_CNT1_CFG		0x204
+#define L2X0_EVENT_CNT0_CFG		0x208
+#define L2X0_EVENT_CNT1_VAL		0x20C
+#define L2X0_EVENT_CNT0_VAL		0x210
+#define L2X0_INTR_MASK			0x214
+#define L2X0_MASKED_INTR_STAT		0x218
+#define L2X0_RAW_INTR_STAT		0x21C
+#define L2X0_INTR_CLEAR			0x220
+#define L2X0_CACHE_SYNC			0x730
+#define L2X0_INV_LINE_PA		0x770
+#define L2X0_INV_WAY			0x77C
+#define L2X0_CLEAN_LINE_PA		0x7B0
+#define L2X0_CLEAN_LINE_IDX		0x7B8
+#define L2X0_CLEAN_WAY			0x7BC
+#define L2X0_CLEAN_INV_LINE_PA		0x7F0
+#define L2X0_CLEAN_INV_LINE_IDX		0x7F8
+#define L2X0_CLEAN_INV_WAY		0x7FC
+#define L2X0_LOCKDOWN_WAY_D		0x900
+#define L2X0_LOCKDOWN_WAY_I		0x904
+#define L2X0_TEST_OPERATION		0xF00
+#define L2X0_LINE_DATA			0xF10
+#define L2X0_LINE_TAG			0xF30
+#define L2X0_DEBUG_CTRL			0xF40
+
+#ifndef __ASSEMBLY__
+extern void __init l2x0_init(void __iomem *base, __u32 aux_val, __u32 aux_mask);
+#endif
+
+#endif
-- 
cgit v1.1


From a21765a70ec06be175d3997320a83fa66fcc8955 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Sun, 11 Feb 2007 18:31:01 +0100
Subject: [ARM] 4157/2: S3C24XX: move arch/arch/mach-s3c2410 into cpu
 components

The following patch and script moves the arch/arm/mach-s3c2410
directory into arch/arm/plat-s3c24xx for the generic core code
and inti arch/arm/mach-s3c{cpu} for the cpu/machine support files

Include directory include/asm-arm/plat-s3c24xx is added for the
core include files.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/plat-s3c24xx/clock.h       |  63 +++++++++++++++++
 include/asm-arm/plat-s3c24xx/common-smdk.h |  15 ++++
 include/asm-arm/plat-s3c24xx/cpu.h         |  69 +++++++++++++++++++
 include/asm-arm/plat-s3c24xx/devs.h        |  51 ++++++++++++++
 include/asm-arm/plat-s3c24xx/dma.h         |  45 ++++++++++++
 include/asm-arm/plat-s3c24xx/irq.h         | 107 +++++++++++++++++++++++++++++
 include/asm-arm/plat-s3c24xx/pm.h          |  73 ++++++++++++++++++++
 include/asm-arm/plat-s3c24xx/s3c2400.h     |  31 +++++++++
 include/asm-arm/plat-s3c24xx/s3c2410.h     |  31 +++++++++
 include/asm-arm/plat-s3c24xx/s3c2412.h     |  29 ++++++++
 include/asm-arm/plat-s3c24xx/s3c2440.h     |  17 +++++
 include/asm-arm/plat-s3c24xx/s3c2442.h     |  17 +++++
 12 files changed, 548 insertions(+)
 create mode 100644 include/asm-arm/plat-s3c24xx/clock.h
 create mode 100644 include/asm-arm/plat-s3c24xx/common-smdk.h
 create mode 100644 include/asm-arm/plat-s3c24xx/cpu.h
 create mode 100644 include/asm-arm/plat-s3c24xx/devs.h
 create mode 100644 include/asm-arm/plat-s3c24xx/dma.h
 create mode 100644 include/asm-arm/plat-s3c24xx/irq.h
 create mode 100644 include/asm-arm/plat-s3c24xx/pm.h
 create mode 100644 include/asm-arm/plat-s3c24xx/s3c2400.h
 create mode 100644 include/asm-arm/plat-s3c24xx/s3c2410.h
 create mode 100644 include/asm-arm/plat-s3c24xx/s3c2412.h
 create mode 100644 include/asm-arm/plat-s3c24xx/s3c2440.h
 create mode 100644 include/asm-arm/plat-s3c24xx/s3c2442.h

(limited to 'include/asm-arm')

diff --git a/include/asm-arm/plat-s3c24xx/clock.h b/include/asm-arm/plat-s3c24xx/clock.h
new file mode 100644
index 0000000..f6135db
--- /dev/null
+++ b/include/asm-arm/plat-s3c24xx/clock.h
@@ -0,0 +1,63 @@
+/* linux/include/asm-arm/plat-s3c24xx/clock.h
+ * linux/arch/arm/mach-s3c2410/clock.h
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ *	http://www.simtec.co.uk/products/SWLINUX/
+ *	Written by Ben Dooks, <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+struct clk {
+	struct list_head      list;
+	struct module        *owner;
+	struct clk           *parent;
+	const char           *name;
+	int		      id;
+	int		      usage;
+	unsigned long         rate;
+	unsigned long         ctrlbit;
+
+	int		    (*enable)(struct clk *, int enable);
+	int		    (*set_rate)(struct clk *c, unsigned long rate);
+	unsigned long	    (*get_rate)(struct clk *c);
+	unsigned long	    (*round_rate)(struct clk *c, unsigned long rate);
+	int		    (*set_parent)(struct clk *c, struct clk *parent);
+};
+
+/* other clocks which may be registered by board support */
+
+extern struct clk s3c24xx_dclk0;
+extern struct clk s3c24xx_dclk1;
+extern struct clk s3c24xx_clkout0;
+extern struct clk s3c24xx_clkout1;
+extern struct clk s3c24xx_uclk;
+
+extern struct clk clk_usb_bus;
+
+/* core clock support */
+
+extern struct clk clk_f;
+extern struct clk clk_h;
+extern struct clk clk_p;
+extern struct clk clk_mpll;
+extern struct clk clk_upll;
+extern struct clk clk_xtal;
+
+/* exports for arch/arm/mach-s3c2410
+ *
+ * Please DO NOT use these outside of arch/arm/mach-s3c2410
+*/
+
+extern struct mutex clocks_mutex;
+
+extern int s3c2410_clkcon_enable(struct clk *clk, int enable);
+
+extern int s3c24xx_register_clock(struct clk *clk);
+
+extern int s3c24xx_setup_clocks(unsigned long xtal,
+				unsigned long fclk,
+				unsigned long hclk,
+				unsigned long pclk);
diff --git a/include/asm-arm/plat-s3c24xx/common-smdk.h b/include/asm-arm/plat-s3c24xx/common-smdk.h
new file mode 100644
index 0000000..58d9094
--- /dev/null
+++ b/include/asm-arm/plat-s3c24xx/common-smdk.h
@@ -0,0 +1,15 @@
+/* linux/include/asm-arm/plat-s3c24xx/common-smdk.h
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Common code for SMDK2410 and SMDK2440 boards
+ *
+ * http://www.fluff.org/ben/smdk2440/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern void smdk_machine_init(void);
diff --git a/include/asm-arm/plat-s3c24xx/cpu.h b/include/asm-arm/plat-s3c24xx/cpu.h
new file mode 100644
index 0000000..8181b22
--- /dev/null
+++ b/include/asm-arm/plat-s3c24xx/cpu.h
@@ -0,0 +1,69 @@
+/* linux/include/asm-arm/plat-s3c24xx/cpu.h
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for S3C24XX CPU support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* todo - fix when rmk changes iodescs to use `void __iomem *` */
+
+#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
+
+#ifndef MHZ
+#define MHZ (1000*1000)
+#endif
+
+#define print_mhz(m) ((m) / MHZ), ((m / 1000) % 1000)
+
+/* forward declaration */
+struct s3c24xx_uart_resources;
+struct platform_device;
+struct s3c2410_uartcfg;
+struct map_desc;
+
+/* core initialisation functions */
+
+extern void s3c24xx_init_irq(void);
+
+extern void s3c24xx_init_io(struct map_desc *mach_desc, int size);
+
+extern void s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+extern void s3c24xx_init_clocks(int xtal);
+
+extern void s3c24xx_init_uartdevs(char *name,
+				  struct s3c24xx_uart_resources *res,
+				  struct s3c2410_uartcfg *cfg, int no);
+
+/* the board structure is used at first initialsation time
+ * to get info such as the devices to register for this
+ * board. This is done because platfrom_add_devices() cannot
+ * be called from the map_io entry.
+*/
+
+struct s3c24xx_board {
+	struct platform_device  **devices;
+	unsigned int              devices_count;
+
+	struct clk		**clocks;
+	unsigned int		  clocks_count;
+};
+
+extern void s3c24xx_set_board(struct s3c24xx_board *board);
+
+/* timer for 2410/2440 */
+
+struct sys_timer;
+extern struct sys_timer s3c24xx_timer;
+
+/* system device classes */
+
+extern struct sysdev_class s3c2410_sysclass;
+extern struct sysdev_class s3c2412_sysclass;
+extern struct sysdev_class s3c2440_sysclass;
+extern struct sysdev_class s3c2442_sysclass;
diff --git a/include/asm-arm/plat-s3c24xx/devs.h b/include/asm-arm/plat-s3c24xx/devs.h
new file mode 100644
index 0000000..dddf485
--- /dev/null
+++ b/include/asm-arm/plat-s3c24xx/devs.h
@@ -0,0 +1,51 @@
+/* linux/include/asm-arm/plat-s3c24xx/devs.h
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for s3c2410 standard platform devices
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+#include <linux/platform_device.h>
+
+struct s3c24xx_uart_resources {
+	struct resource		*resources;
+	unsigned long		 nr_resources;
+};
+
+extern struct s3c24xx_uart_resources s3c2410_uart_resources[];
+
+extern struct platform_device *s3c24xx_uart_devs[];
+extern struct platform_device *s3c24xx_uart_src[];
+
+extern struct platform_device s3c_device_usb;
+extern struct platform_device s3c_device_lcd;
+extern struct platform_device s3c_device_wdt;
+extern struct platform_device s3c_device_i2c;
+extern struct platform_device s3c_device_iis;
+extern struct platform_device s3c_device_rtc;
+extern struct platform_device s3c_device_adc;
+extern struct platform_device s3c_device_sdi;
+
+extern struct platform_device s3c_device_spi0;
+extern struct platform_device s3c_device_spi1;
+
+extern struct platform_device s3c_device_nand;
+
+extern struct platform_device s3c_device_timer0;
+extern struct platform_device s3c_device_timer1;
+extern struct platform_device s3c_device_timer2;
+extern struct platform_device s3c_device_timer3;
+
+extern struct platform_device s3c_device_usbgadget;
+
+/* s3c2440 specific devices */
+
+#ifdef CONFIG_CPU_S3C2440
+
+extern struct platform_device s3c_device_camif;
+
+#endif
diff --git a/include/asm-arm/plat-s3c24xx/dma.h b/include/asm-arm/plat-s3c24xx/dma.h
new file mode 100644
index 0000000..421b567
--- /dev/null
+++ b/include/asm-arm/plat-s3c24xx/dma.h
@@ -0,0 +1,45 @@
+/* linux/include/asm-arm/plat-s3c24xx/dma.h
+ *
+ * Copyright (C) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Samsung S3C24XX DMA support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+extern struct sysdev_class dma_sysclass;
+extern struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];
+
+#define DMA_CH_VALID		(1<<31)
+
+struct s3c24xx_dma_addr {
+	unsigned long		from;
+	unsigned long		to;
+};
+
+/* struct s3c24xx_dma_map
+ *
+ * this holds the mapping information for the channel selected
+ * to be connected to the specified device
+*/
+
+struct s3c24xx_dma_map {
+	const char		*name;
+	struct s3c24xx_dma_addr  hw_addr;
+
+	unsigned long		 channels[S3C2410_DMA_CHANNELS];
+};
+
+struct s3c24xx_dma_selection {
+	struct s3c24xx_dma_map	*map;
+	unsigned long		 map_size;
+	unsigned long		 dcon_mask;
+
+	void	(*select)(struct s3c2410_dma_chan *chan,
+			  struct s3c24xx_dma_map *map);
+};
+
+extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel);
diff --git a/include/asm-arm/plat-s3c24xx/irq.h b/include/asm-arm/plat-s3c24xx/irq.h
new file mode 100644
index 0000000..8af6d95
--- /dev/null
+++ b/include/asm-arm/plat-s3c24xx/irq.h
@@ -0,0 +1,107 @@
+/* linux/include/asm-arm/plat-s3c24xx/irq.h
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for S3C24XX CPU IRQ support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#define irqdbf(x...)
+#define irqdbf2(x...)
+
+#define EXTINT_OFF (IRQ_EINT4 - 4)
+
+extern struct irq_chip s3c_irq_level_chip;
+
+static inline void
+s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit,
+		int subcheck)
+{
+	unsigned long mask;
+	unsigned long submask;
+
+	submask = __raw_readl(S3C2410_INTSUBMSK);
+	mask = __raw_readl(S3C2410_INTMSK);
+
+	submask |= (1UL << (irqno - IRQ_S3CUART_RX0));
+
+	/* check to see if we need to mask the parent IRQ */
+
+	if ((submask  & subcheck) == subcheck) {
+		__raw_writel(mask | parentbit, S3C2410_INTMSK);
+	}
+
+	/* write back masks */
+	__raw_writel(submask, S3C2410_INTSUBMSK);
+
+}
+
+static inline void
+s3c_irqsub_unmask(unsigned int irqno, unsigned int parentbit)
+{
+	unsigned long mask;
+	unsigned long submask;
+
+	submask = __raw_readl(S3C2410_INTSUBMSK);
+	mask = __raw_readl(S3C2410_INTMSK);
+
+	submask &= ~(1UL << (irqno - IRQ_S3CUART_RX0));
+	mask &= ~parentbit;
+
+	/* write back masks */
+	__raw_writel(submask, S3C2410_INTSUBMSK);
+	__raw_writel(mask, S3C2410_INTMSK);
+}
+
+
+static inline void
+s3c_irqsub_maskack(unsigned int irqno, unsigned int parentmask, unsigned int group)
+{
+	unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0);
+
+	s3c_irqsub_mask(irqno, parentmask, group);
+
+	__raw_writel(bit, S3C2410_SUBSRCPND);
+
+	/* only ack parent if we've got all the irqs (seems we must
+	 * ack, all and hope that the irq system retriggers ok when
+	 * the interrupt goes off again)
+	 */
+
+	if (1) {
+		__raw_writel(parentmask, S3C2410_SRCPND);
+		__raw_writel(parentmask, S3C2410_INTPND);
+	}
+}
+
+static inline void
+s3c_irqsub_ack(unsigned int irqno, unsigned int parentmask, unsigned int group)
+{
+	unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0);
+
+	__raw_writel(bit, S3C2410_SUBSRCPND);
+
+	/* only ack parent if we've got all the irqs (seems we must
+	 * ack, all and hope that the irq system retriggers ok when
+	 * the interrupt goes off again)
+	 */
+
+	if (1) {
+		__raw_writel(parentmask, S3C2410_SRCPND);
+		__raw_writel(parentmask, S3C2410_INTPND);
+	}
+}
+
+/* exported for use in arch/arm/mach-s3c2410 */
+
+#ifdef CONFIG_PM
+extern int s3c_irq_wake(unsigned int irqno, unsigned int state);
+#else
+#define s3c_irq_wake NULL
+#endif
+
+extern int s3c_irqext_type(unsigned int irq, unsigned int type);
diff --git a/include/asm-arm/plat-s3c24xx/pm.h b/include/asm-arm/plat-s3c24xx/pm.h
new file mode 100644
index 0000000..cc62366
--- /dev/null
+++ b/include/asm-arm/plat-s3c24xx/pm.h
@@ -0,0 +1,73 @@
+/* linux/include/asm-arm/plat-s3c24xx/pm.h
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ *	Written by Ben Dooks, <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+/* s3c2410_pm_init
+ *
+ * called from board at initialisation time to setup the power
+ * management
+*/
+
+#ifdef CONFIG_PM
+
+extern __init int s3c2410_pm_init(void);
+
+#else
+
+static inline int s3c2410_pm_init(void)
+{
+	return 0;
+}
+#endif
+
+/* configuration for the IRQ mask over sleep */
+extern unsigned long s3c_irqwake_intmask;
+extern unsigned long s3c_irqwake_eintmask;
+
+/* IRQ masks for IRQs allowed to go to sleep (see irq.c) */
+extern unsigned long s3c_irqwake_intallow;
+extern unsigned long s3c_irqwake_eintallow;
+
+/* per-cpu sleep functions */
+
+extern void (*pm_cpu_prep)(void);
+extern void (*pm_cpu_sleep)(void);
+
+/* Flags for PM Control */
+
+extern unsigned long s3c_pm_flags;
+
+/* from sleep.S */
+
+extern int  s3c2410_cpu_save(unsigned long *saveblk);
+extern void s3c2410_cpu_suspend(void);
+extern void s3c2410_cpu_resume(void);
+
+extern unsigned long s3c2410_sleep_save_phys;
+
+/* sleep save info */
+
+struct sleep_save {
+	void __iomem	*reg;
+	unsigned long	val;
+};
+
+#define SAVE_ITEM(x) \
+	{ .reg = (x) }
+
+extern void s3c2410_pm_do_save(struct sleep_save *ptr, int count);
+extern void s3c2410_pm_do_restore(struct sleep_save *ptr, int count);
+
+#ifdef CONFIG_PM
+extern int s3c24xx_irq_suspend(struct sys_device *dev, pm_message_t state);
+extern int s3c24xx_irq_resume(struct sys_device *dev);
+#else
+#define s3c24xx_irq_suspend NULL
+#define s3c24xx_irq_resume  NULL
+#endif
diff --git a/include/asm-arm/plat-s3c24xx/s3c2400.h b/include/asm-arm/plat-s3c24xx/s3c2400.h
new file mode 100644
index 0000000..3a5a168
--- /dev/null
+++ b/include/asm-arm/plat-s3c24xx/s3c2400.h
@@ -0,0 +1,31 @@
+/* linux/include/asm-arm/plat-s3c24xx/s3c2400.h
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for S3C2400 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Modifications:
+ *     09-Fev-2006 LCVR  First version, based on s3c2410.h
+*/
+
+#ifdef CONFIG_CPU_S3C2400
+
+extern  int s3c2400_init(void);
+
+extern void s3c2400_map_io(struct map_desc *mach_desc, int size);
+
+extern void s3c2400_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+extern void s3c2400_init_clocks(int xtal);
+
+#else
+#define s3c2400_init_clocks NULL
+#define s3c2400_init_uarts NULL
+#define s3c2400_map_io NULL
+#define s3c2400_init NULL
+#endif
diff --git a/include/asm-arm/plat-s3c24xx/s3c2410.h b/include/asm-arm/plat-s3c24xx/s3c2410.h
new file mode 100644
index 0000000..36de0b8
--- /dev/null
+++ b/include/asm-arm/plat-s3c24xx/s3c2410.h
@@ -0,0 +1,31 @@
+/* linux/include/asm-arm/plat-s3c24xx/s3c2410.h
+ *
+ * Copyright (c) 2004 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for s3c2410 machine directory
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#ifdef CONFIG_CPU_S3C2410
+
+extern  int s3c2410_init(void);
+
+extern void s3c2410_map_io(struct map_desc *mach_desc, int size);
+
+extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+extern void s3c2410_init_clocks(int xtal);
+
+extern  int s3c2410_baseclk_add(void);
+
+#else
+#define s3c2410_init_clocks NULL
+#define s3c2410_init_uarts NULL
+#define s3c2410_map_io NULL
+#define s3c2410_init NULL
+#endif
diff --git a/include/asm-arm/plat-s3c24xx/s3c2412.h b/include/asm-arm/plat-s3c24xx/s3c2412.h
new file mode 100644
index 0000000..3ec9768
--- /dev/null
+++ b/include/asm-arm/plat-s3c24xx/s3c2412.h
@@ -0,0 +1,29 @@
+/* linux/include/asm-arm/plat-s3c24xx/s3c2412.h
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for s3c2412 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifdef CONFIG_CPU_S3C2412
+
+extern  int s3c2412_init(void);
+
+extern void s3c2412_map_io(struct map_desc *mach_desc, int size);
+
+extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+extern void s3c2412_init_clocks(int xtal);
+
+extern  int s3c2412_baseclk_add(void);
+#else
+#define s3c2412_init_clocks NULL
+#define s3c2412_init_uarts NULL
+#define s3c2412_map_io NULL
+#define s3c2412_init NULL
+#endif
diff --git a/include/asm-arm/plat-s3c24xx/s3c2440.h b/include/asm-arm/plat-s3c24xx/s3c2440.h
new file mode 100644
index 0000000..107853b
--- /dev/null
+++ b/include/asm-arm/plat-s3c24xx/s3c2440.h
@@ -0,0 +1,17 @@
+/* linux/include/asm-arm/plat-s3c24xx/s3c2440.h
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for s3c2440 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifdef CONFIG_CPU_S3C2440
+extern  int s3c2440_init(void);
+#else
+#define s3c2440_init NULL
+#endif
diff --git a/include/asm-arm/plat-s3c24xx/s3c2442.h b/include/asm-arm/plat-s3c24xx/s3c2442.h
new file mode 100644
index 0000000..451a23a
--- /dev/null
+++ b/include/asm-arm/plat-s3c24xx/s3c2442.h
@@ -0,0 +1,17 @@
+/* linux/include/asm-arm/plat-s3c24xx/s3c2442.h
+ *
+ * Copyright (c) 2006 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for s3c2442 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifdef CONFIG_CPU_S3C2442
+extern  int s3c2442_init(void);
+#else
+#define s3c2442_init NULL
+#endif
-- 
cgit v1.1


From b05f87172f904b28bd5ac058ebfb4e216b843efe Mon Sep 17 00:00:00 2001
From: Matt Reimer <mreimer@vpop.net>
Date: Mon, 12 Feb 2007 20:42:52 +0100
Subject: [ARM] 4168/1: S3C24XX: use defines instead of numbers

Use defines instead of numbers.

Signed-off-by: Matt Reimer <mreimer@vpop.net>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/arch-s3c2410/system.h | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

(limited to 'include/asm-arm')

diff --git a/include/asm-arm/arch-s3c2410/system.h b/include/asm-arm/arch-s3c2410/system.h
index ecf250d..41aeb73 100644
--- a/include/asm-arm/arch-s3c2410/system.h
+++ b/include/asm-arm/arch-s3c2410/system.h
@@ -23,7 +23,6 @@ void (*s3c24xx_idle)(void);
 
 void s3c24xx_default_idle(void)
 {
-	void __iomem *reg = S3C2410_CLKCON;
 	unsigned long tmp;
 	int i;
 
@@ -33,16 +32,18 @@ void s3c24xx_default_idle(void)
 
 	/* Warning: going into idle state upsets jtag scanning */
 
-	__raw_writel(__raw_readl(reg) | (1<<2), reg);
+	__raw_writel(__raw_readl(S3C2410_CLKCON) | S3C2410_CLKCON_IDLE,
+		     S3C2410_CLKCON);
 
 	/* the samsung port seems to do a loop and then unset idle.. */
 	for (i = 0; i < 50; i++) {
-		tmp += __raw_readl(reg); /* ensure loop not optimised out */
+		tmp += __raw_readl(S3C2410_CLKCON); /* ensure loop not optimised out */
 	}
 
 	/* this bit is not cleared on re-start... */
 
-	__raw_writel(__raw_readl(reg) & ~(1<<2), reg);
+	__raw_writel(__raw_readl(S3C2410_CLKCON) & ~S3C2410_CLKCON_IDLE,
+		     S3C2410_CLKCON);
 }
 
 static void arch_idle(void)
-- 
cgit v1.1


From 0dcfc328ccd1d475f10a33c0ccf10bda869d4a83 Mon Sep 17 00:00:00 2001
From: Arnaud Patard <arnaud.patard@rtp-net.org>
Date: Tue, 13 Feb 2007 00:18:33 +0100
Subject: [ARM] 4173/1: S3C24XX usb device platform datas

This patch is adding the functions and structures used for handling the
S3C24XX udc driver platform datas.

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/arch-s3c2410/udc.h | 34 ++++++++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)
 create mode 100644 include/asm-arm/arch-s3c2410/udc.h

(limited to 'include/asm-arm')

diff --git a/include/asm-arm/arch-s3c2410/udc.h b/include/asm-arm/arch-s3c2410/udc.h
new file mode 100644
index 0000000..2529eff
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/udc.h
@@ -0,0 +1,34 @@
+/* linux/include/asm/arch-s3c2410/udc.h
+ *
+ * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *
+ *  Changelog:
+ *	14-Mar-2005	RTP	Created file
+ *	02-Aug-2005	RTP	File rename
+ *	07-Sep-2005	BJD	Minor cleanups, changed cmd to enum
+*/
+
+#ifndef __ASM_ARM_ARCH_UDC_H
+#define __ASM_ARM_ARCH_UDC_H
+
+enum s3c2410_udc_cmd_e {
+	S3C2410_UDC_P_ENABLE	= 1,	/* Pull-up enable        */
+	S3C2410_UDC_P_DISABLE	= 2,	/* Pull-up disable       */
+	S3C2410_UDC_P_RESET	= 3,	/* UDC reset, in case of */
+};
+
+struct s3c2410_udc_mach_info {
+	void	(*udc_command)(enum s3c2410_udc_cmd_e);
+	unsigned int vbus_pin;
+	unsigned char vbus_pin_inverted;
+};
+
+extern void __init s3c24xx_udc_set_platdata(struct s3c2410_udc_mach_info *);
+
+#endif /* __ASM_ARM_ARCH_UDC_H */
-- 
cgit v1.1


From 0c6022d453ecebdace0ce15434c7108e158149ca Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Tue, 13 Feb 2007 13:02:52 +0100
Subject: [ARM] 4177/1: S3C24XX: Add DMA channel allocation order

Allow the CPU code, and any board specific initialisation
code to change the allocation order of the DMA channels,
or stop a peripheral allocating any DMA at-all.

This is due to the scarce mapping of DMA channels on
some earlier S3C24XX cpus, where the selection changes
depending on the channel in use.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/plat-s3c24xx/dma.h | 25 +++++++++++++++++++++++++
 1 file changed, 25 insertions(+)

(limited to 'include/asm-arm')

diff --git a/include/asm-arm/plat-s3c24xx/dma.h b/include/asm-arm/plat-s3c24xx/dma.h
index 421b567..15e140c 100644
--- a/include/asm-arm/plat-s3c24xx/dma.h
+++ b/include/asm-arm/plat-s3c24xx/dma.h
@@ -14,6 +14,7 @@ extern struct sysdev_class dma_sysclass;
 extern struct s3c2410_dma_chan s3c2410_chans[S3C2410_DMA_CHANNELS];
 
 #define DMA_CH_VALID		(1<<31)
+#define DMA_CH_NEVER		(1<<30)
 
 struct s3c24xx_dma_addr {
 	unsigned long		from;
@@ -43,3 +44,27 @@ struct s3c24xx_dma_selection {
 };
 
 extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel);
+
+/* struct s3c24xx_dma_order_ch
+ *
+ * channel map for one of the `enum dma_ch` dma channels. the list
+ * entry contains a set of low-level channel numbers, orred with
+ * DMA_CH_VALID, which are checked in the order in the array.
+*/
+
+struct s3c24xx_dma_order_ch {
+	unsigned int	list[S3C2410_DMA_CHANNELS];	/* list of channels */
+	unsigned int	flags;				/* flags */
+};
+
+/* struct s3c24xx_dma_order
+ *
+ * information provided by either the core or the board to give the
+ * dma system a hint on how to allocate channels
+*/
+
+struct s3c24xx_dma_order {
+	struct s3c24xx_dma_order_ch	channels[DMACH_MAX];
+};
+
+extern int s3c24xx_dma_order_set(struct s3c24xx_dma_order *map);
-- 
cgit v1.1


From b3a1bde4db9889feb116330bff21214811c940e4 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Wed, 14 Feb 2007 19:14:56 +0100
Subject: [ARM] 4108/2:  Allow multiple GIC interrupt controllers in a system

The current implementation only assumes one GIC to be present in the
system. However, there are platforms with more than one cascaded interrupt
controllers (RealView/EB MPCore for example).

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/hardware/gic.h | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

(limited to 'include/asm-arm')

diff --git a/include/asm-arm/hardware/gic.h b/include/asm-arm/hardware/gic.h
index 3fa5eb7..966e428 100644
--- a/include/asm-arm/hardware/gic.h
+++ b/include/asm-arm/hardware/gic.h
@@ -33,8 +33,9 @@
 #define GIC_DIST_SOFTINT		0xf00
 
 #ifndef __ASSEMBLY__
-void gic_dist_init(void __iomem *base);
-void gic_cpu_init(void __iomem *base);
+void gic_dist_init(unsigned int gic_nr, void __iomem *base, unsigned int irq_start);
+void gic_cpu_init(unsigned int gic_nr, void __iomem *base);
+void gic_cascade_irq(unsigned int gic_nr, unsigned int irq);
 void gic_raise_softirq(cpumask_t cpumask, unsigned int irq);
 #endif
 
-- 
cgit v1.1


From 3edf22ab34e1fdffc8c0c7c7b7da4d0aebdba118 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Wed, 14 Feb 2007 19:18:09 +0100
Subject: [ARM] 4190/2:  Add the secondary GIC support for the RealView/EB 
 MPCore platform

This patch adds the registration of the secondary GIC on the
baseboard, together with the IRQ chaining setup.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/arch-realview/irqs.h     | 5 ++++-
 include/asm-arm/arch-realview/platform.h | 6 ++++++
 2 files changed, 10 insertions(+), 1 deletion(-)

(limited to 'include/asm-arm')

diff --git a/include/asm-arm/arch-realview/irqs.h b/include/asm-arm/arch-realview/irqs.h
index 76b498e..5a5db56 100644
--- a/include/asm-arm/arch-realview/irqs.h
+++ b/include/asm-arm/arch-realview/irqs.h
@@ -78,6 +78,9 @@
 #define IRQ_PMU_SCU6		(IRQ_GIC_START + INT_PMU_SCU6)
 #define IRQ_PMU_SCU7		(IRQ_GIC_START + INT_PMU_SCU7)
 
+#define IRQ_EB_IRQ1		(IRQ_GIC_START + INT_EB_IRQ1)
+#define IRQ_EB_IRQ2		(IRQ_GIC_START + INT_EB_IRQ2)
+
 #define IRQMASK_WDOGINT		INTMASK_WDOGINT
 #define IRQMASK_SOFTINT		INTMASK_SOFTINT
 #define IRQMASK_COMMRx 		INTMASK_COMMRx
@@ -115,4 +118,4 @@
 #define IRQMASK_ETH		INTMASK_ETH
 #define IRQMASK_USB		INTMASK_USB
 
-#define NR_IRQS			(IRQ_GIC_START + 64)
+#define NR_IRQS			(IRQ_GIC_START + 96)
diff --git a/include/asm-arm/arch-realview/platform.h b/include/asm-arm/arch-realview/platform.h
index 18d7c18..bf52ca7 100644
--- a/include/asm-arm/arch-realview/platform.h
+++ b/include/asm-arm/arch-realview/platform.h
@@ -212,6 +212,8 @@
 #define REALVIEW_TWD_BASE		0x10100700
 #define REALVIEW_TWD_SIZE		0x00000100
 #define REALVIEW_GIC_DIST_BASE		0x10101000	/* Generic interrupt controller distributor */
+#define REALVIEW_GIC1_CPU_BASE        0x10040000	/* Generic interrupt controller CPU interface */
+#define REALVIEW_GIC1_DIST_BASE       0x10041000	/* Generic interrupt controller distributor */
 #endif
 #define REALVIEW_SMC_BASE             0x10080000	/* SMC */
 	/* Reserved 0x10090000 - 0x100EFFFF */
@@ -306,7 +308,11 @@
 #define INT_USB				29	/* USB controller */
 #define INT_TSPENINT			30	/* Touchscreen pen */
 #define INT_TSKPADINT			31	/* Touchscreen keypad */
+
 #else
+
+#define MAX_GIC_NR			2
+
 #define INT_AACI			0
 #define INT_TIMERINT0_1			1
 #define INT_TIMERINT2_3			2
-- 
cgit v1.1


From 4b17244c133689ad0cbdca37ce3e15068f120428 Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Wed, 14 Feb 2007 19:20:28 +0100
Subject: [ARM] 4109/2:  Add support for the RealView/EB MPCore revC platform

The kernel originally supported revB only. This patch enables revC by
default and adds a config option for building the kernel for the revB
platform. Since the SCU base address was hard-coded in the proc-v6.S
file (and only valid for RealView/EB revB), this patch also adds a
more generic support for defining the SCU information.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/arch-realview/hardware.h |  2 +-
 include/asm-arm/arch-realview/platform.h | 10 ++++++++++
 include/asm-arm/arch-realview/scu.h      |  8 ++++++++
 include/asm-arm/hardware/arm_scu.h       |  2 ++
 4 files changed, 21 insertions(+), 1 deletion(-)
 create mode 100644 include/asm-arm/arch-realview/scu.h

(limited to 'include/asm-arm')

diff --git a/include/asm-arm/arch-realview/hardware.h b/include/asm-arm/arch-realview/hardware.h
index 9ca76dc..aa78fe0 100644
--- a/include/asm-arm/arch-realview/hardware.h
+++ b/include/asm-arm/arch-realview/hardware.h
@@ -26,7 +26,7 @@
 #include <asm/arch/platform.h>
 
 /* macro to get at IO space when running virtually */
-#define IO_ADDRESS(x)		(((x) & 0x0fffffff) + (((x) >> 4) & 0x0f000000) + 0xf0000000)
+#define IO_ADDRESS(x)		((((x) & 0x0effffff) | (((x) >> 4) & 0x0f000000)) + 0xf0000000)
 #define __io_address(n)		__io(IO_ADDRESS(n))
 
 #endif
diff --git a/include/asm-arm/arch-realview/platform.h b/include/asm-arm/arch-realview/platform.h
index bf52ca7..87acd9c 100644
--- a/include/asm-arm/arch-realview/platform.h
+++ b/include/asm-arm/arch-realview/platform.h
@@ -207,11 +207,21 @@
 #define REALVIEW_GIC_CPU_BASE         0x10040000	/* Generic interrupt controller CPU interface */
 #define REALVIEW_GIC_DIST_BASE        0x10041000	/* Generic interrupt controller distributor */
 #else
+#ifdef CONFIG_REALVIEW_MPCORE_REVB
 #define REALVIEW_MPCORE_SCU_BASE	0x10100000	/*  SCU registers */
 #define REALVIEW_GIC_CPU_BASE		0x10100100	/* Generic interrupt controller CPU interface */
 #define REALVIEW_TWD_BASE		0x10100700
 #define REALVIEW_TWD_SIZE		0x00000100
 #define REALVIEW_GIC_DIST_BASE		0x10101000	/* Generic interrupt controller distributor */
+#define REALVIEW_MPCORE_SYS_PLD_CTRL1 0xD8		/*  Register offset for MPCore sysctl */
+#else
+#define REALVIEW_MPCORE_SCU_BASE      0x1F000000	/*  SCU registers */
+#define REALVIEW_GIC_CPU_BASE         0x1F000100	/* Generic interrupt controller CPU interface */
+#define REALVIEW_TWD_BASE             0x1F000700
+#define REALVIEW_TWD_SIZE             0x00000100
+#define REALVIEW_GIC_DIST_BASE        0x1F001000	/* Generic interrupt controller distributor */
+#define REALVIEW_MPCORE_SYS_PLD_CTRL1 0x74		/*  Register offset for MPCore sysctl */
+#endif
 #define REALVIEW_GIC1_CPU_BASE        0x10040000	/* Generic interrupt controller CPU interface */
 #define REALVIEW_GIC1_DIST_BASE       0x10041000	/* Generic interrupt controller distributor */
 #endif
diff --git a/include/asm-arm/arch-realview/scu.h b/include/asm-arm/arch-realview/scu.h
new file mode 100644
index 0000000..cc29364
--- /dev/null
+++ b/include/asm-arm/arch-realview/scu.h
@@ -0,0 +1,8 @@
+#ifndef __ASMARM_ARCH_SCU_H
+#define __ASMARM_ARCH_SCU_H
+
+#include <asm/arch/platform.h>
+
+#define SCU_BASE	REALVIEW_MPCORE_SCU_BASE
+
+#endif
diff --git a/include/asm-arm/hardware/arm_scu.h b/include/asm-arm/hardware/arm_scu.h
index 9903f60..7d28eb5 100644
--- a/include/asm-arm/hardware/arm_scu.h
+++ b/include/asm-arm/hardware/arm_scu.h
@@ -1,6 +1,8 @@
 #ifndef ASMARM_HARDWARE_ARM_SCU_H
 #define ASMARM_HARDWARE_ARM_SCU_H
 
+#include <asm/arch/scu.h>
+
 /*
  * SCU registers
  */
-- 
cgit v1.1


From 7770bddb27ea84519486d8bb5d35d36d580c451b Mon Sep 17 00:00:00 2001
From: Catalin Marinas <catalin.marinas@arm.com>
Date: Mon, 5 Feb 2007 14:48:24 +0100
Subject: [ARM] 4130/1: Add L220 support to RealView/EB

This patch enables the L220 on the RealView/EB MPCore platform.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/arch-realview/platform.h | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'include/asm-arm')

diff --git a/include/asm-arm/arch-realview/platform.h b/include/asm-arm/arch-realview/platform.h
index 87acd9c..6e0eab9 100644
--- a/include/asm-arm/arch-realview/platform.h
+++ b/include/asm-arm/arch-realview/platform.h
@@ -213,6 +213,7 @@
 #define REALVIEW_TWD_BASE		0x10100700
 #define REALVIEW_TWD_SIZE		0x00000100
 #define REALVIEW_GIC_DIST_BASE		0x10101000	/* Generic interrupt controller distributor */
+#define REALVIEW_MPCORE_L220_BASE	0x10102000	/* L220 registers */
 #define REALVIEW_MPCORE_SYS_PLD_CTRL1 0xD8		/*  Register offset for MPCore sysctl */
 #else
 #define REALVIEW_MPCORE_SCU_BASE      0x1F000000	/*  SCU registers */
@@ -220,6 +221,7 @@
 #define REALVIEW_TWD_BASE             0x1F000700
 #define REALVIEW_TWD_SIZE             0x00000100
 #define REALVIEW_GIC_DIST_BASE        0x1F001000	/* Generic interrupt controller distributor */
+#define REALVIEW_MPCORE_L220_BASE     0x1F002000	/* L220 registers */
 #define REALVIEW_MPCORE_SYS_PLD_CTRL1 0x74		/*  Register offset for MPCore sysctl */
 #endif
 #define REALVIEW_GIC1_CPU_BASE        0x10040000	/* Generic interrupt controller CPU interface */
-- 
cgit v1.1


From e9390ef845a5fdb0506d6d37b1461c48394c47b3 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Thu, 15 Feb 2007 12:50:03 +0100
Subject: [ARM] 4193/1: S3C2443: clock register definitions

Clock register definitions for the S3C2443

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h | 192 ++++++++++++++++++++++
 1 file changed, 192 insertions(+)
 create mode 100644 include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h

(limited to 'include/asm-arm')

diff --git a/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h b/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h
new file mode 100644
index 0000000..e696554
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h
@@ -0,0 +1,192 @@
+/* linux/include/asm-arm/arch-s3c2410/regs-clock.h
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2443 clock register definitions
+*/
+
+#ifndef __ASM_ARM_REGS_S3C2443_CLOCK
+#define __ASM_ARM_REGS_S3C2443_CLOCK
+
+#define S3C2443_CLKREG(x)		((x) + S3C24XX_VA_CLKPWR)
+
+#define S3C2443_PLLCON_MDIVSHIFT	16
+#define S3C2443_PLLCON_PDIVSHIFT	8
+#define S3C2443_PLLCON_SDIVSHIFT	0
+#define S3C2443_PLLCON_MDIVMASK		((1<<(1+(23-16)))-1)
+#define S3C2443_PLLCON_PDIVMASK		((1<<(1+(9-8)))-1)
+#define S3C2443_PLLCON_SDIVMASK		(3)
+
+#define S3C2443_MPLLCON			S3C2443_CLKREG(0x10)
+#define S3C2443_EPLLCON			S3C2443_CLKREG(0x18)
+#define S3C2443_CLKSRC			S3C2443_CLKREG(0x20)
+#define S3C2443_CLKDIV0			S3C2443_CLKREG(0x24)
+#define S3C2443_CLKDIV1			S3C2443_CLKREG(0x28)
+#define S3C2443_HCLKCON			S3C2443_CLKREG(0x30)
+#define S3C2443_PCLKCON			S3C2443_CLKREG(0x34)
+#define S3C2443_SCLKCON			S3C2443_CLKREG(0x38)
+#define S3C2443_PWRMODE			S3C2443_CLKREG(0x40)
+#define S3C2443_SWRST			S3C2443_CLKREG(0x44)
+#define S3C2443_BUSPRI0			S3C2443_CLKREG(0x50)
+#define S3C2443_SYSID			S3C2443_CLKREG(0x5C)
+#define S3C2443_PWRCFG			S3C2443_CLKREG(0x60)
+#define S3C2443_RSTCON			S3C2443_CLKREG(0x64)
+
+#define S3C2443_PLLCON_OFF		(1<<24)
+
+#define S3C2443_CLKSRC_I2S_EXT		(1<<14)
+#define S3C2443_CLKSRC_I2S_EPLLDIV	(0<<14)
+#define S3C2443_CLKSRC_I2S_EPLLREF	(2<<14)
+#define S3C2443_CLKSRC_I2S_EPLLREF3	(3<<14)
+#define S3C2443_CLKSRC_I2S_MASK		(3<<14)
+
+#define S3C2443_CLKSRC_EPLLREF_XTAL	(2<<8)
+#define S3C2443_CLKSRC_EPLLREF_EXTCLK	(3<<8)
+#define S3C2443_CLKSRC_EPLLREF_MPLLREF	(0<<8)
+#define S3C2443_CLKSRC_EPLLREF_MPLLREF2	(1<<8)
+#define S3C2443_CLKSRC_EPLLREF_MASK	(3<<8)
+
+#define S3C2443_CLKSRC_ESYSCLK_EPLL	(1<<6)
+#define S3C2443_CLKSRC_MSYSCLK_MPLL	(1<<4)
+#define S3C2443_CLKSRC_EXTCLK_DIV	(1<<3)
+
+#define S3C2443_CLKDIV0_DVS		(1<<13)
+#define S3C2443_CLKDIV0_HALF_HCLK	(1<<3)
+#define S3C2443_CLKDIV0_HALF_PCLK	(1<<2)
+
+#define S3C2443_CLKDIV0_HCLKDIV_MASK	(3<<0)
+
+#define S3C2443_CLKDIV0_EXTDIV_MASK	(3<<6)
+#define S3C2443_CLKDIV0_EXTDIV_SHIFT	(6)
+
+#define S3C2443_CLKDIV0_PREDIV_MASK	(3<<4)
+#define S3C2443_CLKDIV0_PREDIV_SHIFT	(4)
+
+#define S3C2443_CLKDIV0_ARMDIV_MASK	(15<<9)
+#define S3C2443_CLKDIV0_ARMDIV_SHIFT	(9)
+#define S3C2443_CLKDIV0_ARMDIV_1	(0<<9)
+#define S3C2443_CLKDIV0_ARMDIV_2	(8<<9)
+#define S3C2443_CLKDIV0_ARMDIV_3	(2<<9)
+#define S3C2443_CLKDIV0_ARMDIV_4	(9<<9)
+#define S3C2443_CLKDIV0_ARMDIV_6	(10<<9)
+#define S3C2443_CLKDIV0_ARMDIV_8	(11<<9)
+#define S3C2443_CLKDIV0_ARMDIV_12	(13<<9)
+#define S3C2443_CLKDIV0_ARMDIV_16	(15<<9)
+
+/* S3C2443_CLKDIV1 */
+
+#define S3C2443_CLKDIV1_CAMDIV_MASK	(15<<26)
+#define S3C2443_CLKDIV1_CAMDIV_SHIFT	(26)
+
+#define S3C2443_CLKDIV1_HSSPIDIV_MASK	(3<<24)
+#define S3C2443_CLKDIV1_HSSPIDIV_SHIFT	(24)
+
+#define S3C2443_CLKDIV1_DISPDIV_MASK	(0xff<<16)
+#define S3C2443_CLKDIV1_DISPDIV_SHIFT	(16)
+
+#define S3C2443_CLKDIV1_I2SDIV_MASK	(15<<12)
+#define S3C2443_CLKDIV1_I2SDIV_SHIFT	(12)
+
+#define S3C2443_CLKDIV1_UARTDIV_MASK	(15<<8)
+#define S3C2443_CLKDIV1_UARTDIV_SHIFT	(8)
+
+#define S3C2443_CLKDIV1_HSMMCDIV_MASK	(3<<6)
+#define S3C2443_CLKDIV1_HSMMCDIV_SHIFT	(6)
+
+#define S3C2443_CLKDIV1_USBHOSTDIV_MASK	(3<<4)
+#define S3C2443_CLKDIV1_USBHOSTDIV_SHIFT (4)
+
+#define S3C2443_CLKCON_NAND
+
+#define S3C2443_HCLKCON_DMA0		(1<<0)
+#define S3C2443_HCLKCON_DMA1		(1<<1)
+#define S3C2443_HCLKCON_DMA2		(1<<2)
+#define S3C2443_HCLKCON_DMA3		(1<<3)
+#define S3C2443_HCLKCON_DMA4		(1<<4)
+#define S3C2443_HCLKCON_DMA5		(1<<5)
+#define S3C2443_HCLKCON_CAMIF		(1<<8)
+#define S3C2443_HCLKCON_DISP		(1<<9)
+#define S3C2443_HCLKCON_LCDC		(1<<10)
+#define S3C2443_HCLKCON_USBH		(1<<11)
+#define S3C2443_HCLKCON_USBD		(1<<12)
+#define S3C2443_HCLKCON_HSMMC		(1<<16)
+#define S3C2443_HCLKCON_CFC		(1<<17)
+#define S3C2443_HCLKCON_SSMC		(1<<18)
+#define S3C2443_HCLKCON_DRAMC		(1<<19)
+
+#define S3C2443_PCLKCON_UART0		(1<<0)
+#define S3C2443_PCLKCON_UART1		(1<<1)
+#define S3C2443_PCLKCON_UART2		(1<<2)
+#define S3C2443_PCLKCON_UART3		(1<<3)
+#define S3C2443_PCLKCON_IIC		(1<<4)
+#define S3C2443_PCLKCON_SDI		(1<<5)
+#define S3C2443_PCLKCON_ADC		(1<<7)
+#define S3C2443_PCLKCON_IIS		(1<<9)
+#define S3C2443_PCLKCON_PWMT		(1<<10)
+#define S3C2443_PCLKCON_WDT		(1<<11)
+#define S3C2443_PCLKCON_RTC		(1<<12)
+#define S3C2443_PCLKCON_GPIO		(1<<13)
+#define S3C2443_PCLKCON_SPI0		(1<<14)
+#define S3C2443_PCLKCON_SPI1		(1<<15)
+
+#define S3C2443_SCLKCON_DDRCLK		(1<<16)
+#define S3C2443_SCLKCON_SSMCCLK		(1<<15)
+#define S3C2443_SCLKCON_HSSPICLK	(1<<14)
+#define S3C2443_SCLKCON_HSMMCCLK_EXT	(1<<13)
+#define S3C2443_SCLKCON_HSMMCCLK_EPLL	(1<<12)
+#define S3C2443_SCLKCON_CAMCLK		(1<<11)
+#define S3C2443_SCLKCON_DISPCLK		(1<<10)
+#define S3C2443_SCLKCON_I2SCLK		(1<<9)
+#define S3C2443_SCLKCON_UARTCLK		(1<<8)
+#define S3C2443_SCLKCON_USBHOST		(1<<1)
+
+#include <asm/div64.h>
+
+static inline unsigned int
+s3c2443_get_mpll(unsigned int pllval, unsigned int baseclk)
+{
+	unsigned int mdiv, pdiv, sdiv;
+	uint64_t fvco;
+
+	mdiv = pllval >> S3C2443_PLLCON_MDIVSHIFT;
+	pdiv = pllval >> S3C2443_PLLCON_PDIVSHIFT;
+	sdiv = pllval >> S3C2443_PLLCON_SDIVSHIFT;
+
+	mdiv &= S3C2443_PLLCON_MDIVMASK;
+	pdiv &= S3C2443_PLLCON_PDIVMASK;
+	sdiv &= S3C2443_PLLCON_SDIVMASK;
+
+	fvco = (uint64_t)baseclk * (2 * (mdiv + 8));
+	do_div(fvco, pdiv << sdiv);
+
+	return (unsigned int)fvco;
+}
+
+static inline unsigned int
+s3c2443_get_epll(unsigned int pllval, unsigned int baseclk)
+{
+	unsigned int mdiv, pdiv, sdiv;
+	uint64_t fvco;
+
+	mdiv = pllval >> S3C2443_PLLCON_MDIVSHIFT;
+	pdiv = pllval >> S3C2443_PLLCON_PDIVSHIFT;
+	sdiv = pllval >> S3C2443_PLLCON_SDIVSHIFT;
+
+	mdiv &= S3C2443_PLLCON_MDIVMASK;
+	pdiv &= S3C2443_PLLCON_PDIVMASK;
+	sdiv &= S3C2443_PLLCON_SDIVMASK;
+
+	fvco = (uint64_t)baseclk * (mdiv + 8);
+	do_div(fvco, (pdiv + 2) << sdiv);
+
+	return (unsigned int)fvco;
+}
+
+#endif /*  __ASM_ARM_REGS_S3C2443_CLOCK */
+
-- 
cgit v1.1


From 6619d58a6569092ab6829ae1cdde78418999649d Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Thu, 15 Feb 2007 12:52:01 +0100
Subject: [ARM] 4194/1: S3C2443: include/asm-arm/arch-s3c2410/regs-gpio.h
 updates

Updates for regs-gpio.h for S3C2443

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/arch-s3c2410/regs-gpio.h | 32 +++++++++++++++++++++++++++++---
 1 file changed, 29 insertions(+), 3 deletions(-)

(limited to 'include/asm-arm')

diff --git a/include/asm-arm/arch-s3c2410/regs-gpio.h b/include/asm-arm/arch-s3c2410/regs-gpio.h
index eae9169..dea578b 100644
--- a/include/asm-arm/arch-s3c2410/regs-gpio.h
+++ b/include/asm-arm/arch-s3c2410/regs-gpio.h
@@ -201,7 +201,7 @@
 #define S3C2400_GPBDAT	   S3C2410_GPIOREG(0x0C)
 #define S3C2400_GPBUP	   S3C2410_GPIOREG(0x10)
 
-/* no i/o pin in port b can have value 3! */
+/* no i/o pin in port b can have value 3 (unless it is a s3c2443) ! */
 
 #define S3C2410_GPB0         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 0)
 #define S3C2410_GPB0_INP     (0x00 << 0)
@@ -242,6 +242,7 @@
 #define S3C2410_GPB5_INP     (0x00 << 10)
 #define S3C2410_GPB5_OUTP    (0x01 << 10)
 #define S3C2410_GPB5_nXBACK  (0x02 << 10)
+#define S3C2443_GPB5_XBACK   (0x03 << 10)
 #define S3C2400_GPB5_DATA21  (0x02 << 10)
 #define S3C2400_GPB5_nCTS1   (0x03 << 10)
 
@@ -249,6 +250,7 @@
 #define S3C2410_GPB6_INP     (0x00 << 12)
 #define S3C2410_GPB6_OUTP    (0x01 << 12)
 #define S3C2410_GPB6_nXBREQ  (0x02 << 12)
+#define S3C2443_GPB6_XBREQ   (0x03 << 12)
 #define S3C2400_GPB6_DATA22  (0x02 << 12)
 #define S3C2400_GPB6_nRTS1   (0x03 << 12)
 
@@ -256,6 +258,7 @@
 #define S3C2410_GPB7_INP     (0x00 << 14)
 #define S3C2410_GPB7_OUTP    (0x01 << 14)
 #define S3C2410_GPB7_nXDACK1 (0x02 << 14)
+#define S3C2443_GPB7_XDACK1  (0x03 << 14)
 #define S3C2400_GPB7_DATA23  (0x02 << 14)
 
 #define S3C2410_GPB8         S3C2410_GPIONO(S3C2410_GPIO_BANKB, 8)
@@ -268,6 +271,7 @@
 #define S3C2410_GPB9_INP     (0x00 << 18)
 #define S3C2410_GPB9_OUTP    (0x01 << 18)
 #define S3C2410_GPB9_nXDACK0 (0x02 << 18)
+#define S3C2443_GPB9_XDACK0  (0x03 << 18)
 #define S3C2400_GPB9_DATA25  (0x02 << 18)
 #define S3C2400_GPB9_I2SSDI  (0x03 << 18)
 
@@ -275,6 +279,7 @@
 #define S3C2410_GPB10_INP    (0x00 << 20)
 #define S3C2410_GPB10_OUTP   (0x01 << 20)
 #define S3C2410_GPB10_nXDRE0 (0x02 << 20)
+#define S3C2443_GPB10_XDREQ0 (0x03 << 20)
 #define S3C2400_GPB10_DATA26 (0x02 << 20)
 #define S3C2400_GPB10_nSS    (0x03 << 20)
 
@@ -556,6 +561,7 @@
 #define S3C2410_GPE0_INP       (0x00 << 0)
 #define S3C2410_GPE0_OUTP      (0x01 << 0)
 #define S3C2410_GPE0_I2SLRCK   (0x02 << 0)
+#define S3C2443_GPE0_AC_nRESET (0x03 << 0)
 #define S3C2400_GPE0_EINT0     (0x02 << 0)
 #define S3C2410_GPE0_MASK      (0x03 << 0)
 
@@ -563,6 +569,7 @@
 #define S3C2410_GPE1_INP       (0x00 << 2)
 #define S3C2410_GPE1_OUTP      (0x01 << 2)
 #define S3C2410_GPE1_I2SSCLK   (0x02 << 2)
+#define S3C2443_GPE1_AC_SYNC   (0x03 << 2)
 #define S3C2400_GPE1_EINT1     (0x02 << 2)
 #define S3C2400_GPE1_nSS       (0x03 << 2)
 #define S3C2410_GPE1_MASK      (0x03 << 2)
@@ -571,6 +578,7 @@
 #define S3C2410_GPE2_INP       (0x00 << 4)
 #define S3C2410_GPE2_OUTP      (0x01 << 4)
 #define S3C2410_GPE2_CDCLK     (0x02 << 4)
+#define S3C2443_GPE2_AC_BITCLK (0x03 << 4)
 #define S3C2400_GPE2_EINT2     (0x02 << 4)
 #define S3C2400_GPE2_I2SSDI    (0x03 << 4)
 
@@ -578,6 +586,7 @@
 #define S3C2410_GPE3_INP       (0x00 << 6)
 #define S3C2410_GPE3_OUTP      (0x01 << 6)
 #define S3C2410_GPE3_I2SSDI    (0x02 << 6)
+#define S3C2443_GPE3_AC_SDI    (0x03 << 6)
 #define S3C2400_GPE3_EINT3     (0x02 << 6)
 #define S3C2400_GPE3_nCTS1     (0x03 << 6)
 #define S3C2410_GPE3_nSS0      (0x03 << 6)
@@ -587,6 +596,7 @@
 #define S3C2410_GPE4_INP       (0x00 << 8)
 #define S3C2410_GPE4_OUTP      (0x01 << 8)
 #define S3C2410_GPE4_I2SSDO    (0x02 << 8)
+#define S3C2443_GPE4_AC_SDO    (0x03 << 8)
 #define S3C2400_GPE4_EINT4     (0x02 << 8)
 #define S3C2400_GPE4_nRTS1     (0x03 << 8)
 #define S3C2410_GPE4_I2SSDI    (0x03 << 8)
@@ -596,6 +606,7 @@
 #define S3C2410_GPE5_INP       (0x00 << 10)
 #define S3C2410_GPE5_OUTP      (0x01 << 10)
 #define S3C2410_GPE5_SDCLK     (0x02 << 10)
+#define S3C2443_GPE5_SD1_CLK   (0x02 << 10)
 #define S3C2400_GPE5_EINT5     (0x02 << 10)
 #define S3C2400_GPE5_TCLK1     (0x03 << 10)
 
@@ -603,24 +614,32 @@
 #define S3C2410_GPE6_INP       (0x00 << 12)
 #define S3C2410_GPE6_OUTP      (0x01 << 12)
 #define S3C2410_GPE6_SDCMD     (0x02 << 12)
+#define S3C2443_GPE6_SD1_CMD   (0x02 << 12)
+#define S3C2443_GPE6_AC_BITCLK (0x03 << 12)
 #define S3C2400_GPE6_EINT6     (0x02 << 12)
 
 #define S3C2410_GPE7           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 7)
 #define S3C2410_GPE7_INP       (0x00 << 14)
 #define S3C2410_GPE7_OUTP      (0x01 << 14)
 #define S3C2410_GPE7_SDDAT0    (0x02 << 14)
+#define S3C2443_GPE5_SD1_DAT0  (0x02 << 14)
+#define S3C2443_GPE7_AC_SDI    (0x03 << 14)
 #define S3C2400_GPE7_EINT7     (0x02 << 14)
 
 #define S3C2410_GPE8           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 8)
 #define S3C2410_GPE8_INP       (0x00 << 16)
 #define S3C2410_GPE8_OUTP      (0x01 << 16)
 #define S3C2410_GPE8_SDDAT1    (0x02 << 16)
+#define S3C2443_GPE8_SD1_DAT1  (0x02 << 16)
+#define S3C2443_GPE8_AC_SDO    (0x03 << 16)
 #define S3C2400_GPE8_nXDACK0   (0x02 << 16)
 
 #define S3C2410_GPE9           S3C2410_GPIONO(S3C2410_GPIO_BANKE, 9)
 #define S3C2410_GPE9_INP       (0x00 << 18)
 #define S3C2410_GPE9_OUTP      (0x01 << 18)
 #define S3C2410_GPE9_SDDAT2    (0x02 << 18)
+#define S3C2443_GPE9_SD1_DAT2  (0x02 << 18)
+#define S3C2443_GPE9_AC_SYNC   (0x03 << 18)
 #define S3C2400_GPE9_nXDACK1   (0x02 << 18)
 #define S3C2400_GPE9_nXBACK    (0x03 << 18)
 
@@ -628,6 +647,8 @@
 #define S3C2410_GPE10_INP      (0x00 << 20)
 #define S3C2410_GPE10_OUTP     (0x01 << 20)
 #define S3C2410_GPE10_SDDAT3   (0x02 << 20)
+#define S3C2443_GPE10_SD1_DAT3 (0x02 << 20)
+#define S3C2443_GPE10_AC_nRESET (0x03 << 20)
 #define S3C2400_GPE10_nXDREQ0  (0x02 << 20)
 
 #define S3C2410_GPE11          S3C2410_GPIONO(S3C2410_GPIO_BANKE, 11)
@@ -796,6 +817,7 @@
 #define S3C2400_GPG4_MMCCLK   (0x02 << 8)
 #define S3C2400_GPG4_I2SSDI   (0x03 << 8)
 #define S3C2410_GPG4_LCDPWREN (0x03 << 8)
+#define S3C2443_GPG4_LCDPWRDN (0x03 << 8)
 
 #define S3C2410_GPG5          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 5)
 #define S3C2410_GPG5_INP      (0x00 << 10)
@@ -803,7 +825,7 @@
 #define S3C2410_GPG5_EINT13   (0x02 << 10)
 #define S3C2400_GPG5_MMCCMD   (0x02 << 10)
 #define S3C2400_GPG5_IICSDA   (0x03 << 10)
-#define S3C2410_GPG5_SPIMISO1 (0x03 << 10)
+#define S3C2410_GPG5_SPIMISO1 (0x03 << 10)	/* not s3c2443 */
 
 #define S3C2410_GPG6          S3C2410_GPIONO(S3C2410_GPIO_BANKG, 6)
 #define S3C2410_GPG6_INP      (0x00 << 12)
@@ -845,6 +867,7 @@
 #define S3C2410_GPG11_OUTP    (0x01 << 22)
 #define S3C2410_GPG11_EINT19  (0x02 << 22)
 #define S3C2410_GPG11_TCLK1   (0x03 << 22)
+#define S3C2443_GPG11_CF_nIREQ (0x03 << 22)
 
 #define S3C2410_GPG12         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 12)
 #define S3C2410_GPG12_INP     (0x00 << 24)
@@ -852,25 +875,28 @@
 #define S3C2410_GPG12_EINT20  (0x02 << 24)
 #define S3C2410_GPG12_XMON    (0x03 << 24)
 #define S3C2442_GPG12_nSPICS0 (0x03 << 24)
+#define S3C2443_GPG12_nINPACK (0x03 << 24)
 
 #define S3C2410_GPG13         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 13)
 #define S3C2410_GPG13_INP     (0x00 << 26)
 #define S3C2410_GPG13_OUTP    (0x01 << 26)
 #define S3C2410_GPG13_EINT21  (0x02 << 26)
 #define S3C2410_GPG13_nXPON   (0x03 << 26)
+#define S3C2443_GPG13_CF_nREG (0x03 << 26)
 
 #define S3C2410_GPG14         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 14)
 #define S3C2410_GPG14_INP     (0x00 << 28)
 #define S3C2410_GPG14_OUTP    (0x01 << 28)
 #define S3C2410_GPG14_EINT22  (0x02 << 28)
 #define S3C2410_GPG14_YMON    (0x03 << 28)
+#define S3C2443_GPG14_CF_RESET (0x03 << 28)
 
 #define S3C2410_GPG15         S3C2410_GPIONO(S3C2410_GPIO_BANKG, 15)
 #define S3C2410_GPG15_INP     (0x00 << 30)
 #define S3C2410_GPG15_OUTP    (0x01 << 30)
 #define S3C2410_GPG15_EINT23  (0x02 << 30)
 #define S3C2410_GPG15_nYPON   (0x03 << 30)
-
+#define S3C2443_GPG15_CF_PWR  (0x03 << 30)
 
 #define S3C2410_GPG_PUPDIS(x)  (1<<(x))
 
-- 
cgit v1.1


From 092651c5a988ffca98ee26bbb42688fbfd448718 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Thu, 15 Feb 2007 12:57:20 +0100
Subject: [ARM] 4195/1: S3C2443: include/asm-arm/arch-s3c2410/regs-serial.h
 updates

Updates for regs-serial.h for S3C2443

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/arch-s3c2410/regs-serial.h | 13 ++++++++++++-
 1 file changed, 12 insertions(+), 1 deletion(-)

(limited to 'include/asm-arm')

diff --git a/include/asm-arm/arch-s3c2410/regs-serial.h b/include/asm-arm/arch-s3c2410/regs-serial.h
index 46f5240..8946702 100644
--- a/include/asm-arm/arch-s3c2410/regs-serial.h
+++ b/include/asm-arm/arch-s3c2410/regs-serial.h
@@ -35,10 +35,12 @@
 #define S3C24XX_VA_UART0      (S3C24XX_VA_UART)
 #define S3C24XX_VA_UART1      (S3C24XX_VA_UART + 0x4000 )
 #define S3C24XX_VA_UART2      (S3C24XX_VA_UART + 0x8000 )
+#define S3C24XX_VA_UART3      (S3C24XX_VA_UART + 0xC000 )
 
 #define S3C2410_PA_UART0      (S3C24XX_PA_UART)
 #define S3C2410_PA_UART1      (S3C24XX_PA_UART + 0x4000 )
 #define S3C2410_PA_UART2      (S3C24XX_PA_UART + 0x8000 )
+#define S3C2443_PA_UART3      (S3C24XX_PA_UART + 0xC000 )
 
 #define S3C2410_URXH	  (0x24)
 #define S3C2410_UTXH	  (0x20)
@@ -73,6 +75,8 @@
 #define S3C2440_UCON_UCLK	  (1<<10)
 #define S3C2440_UCON_PCLK2	  (2<<10)
 #define S3C2440_UCON_FCLK	  (3<<10)
+#define S3C2443_UCON_EPLL	  (3<<10)
+
 #define S3C2440_UCON2_FCLK_EN	  (1<<15)
 #define S3C2440_UCON0_DIVMASK	  (15 << 12)
 #define S3C2440_UCON1_DIVMASK	  (15 << 12)
@@ -93,6 +97,8 @@
 #define S3C2410_UCON_TXIRQMODE	  (1<<2)
 #define S3C2410_UCON_RXIRQMODE	  (1<<0)
 #define S3C2410_UCON_RXFIFO_TOI	  (1<<7)
+#define S3C2443_UCON_RXERR_IRQEN  (1<<6)
+#define S3C2443_UCON_LOOPBACK	  (1<<5)
 
 #define S3C2410_UCON_DEFAULT	  (S3C2410_UCON_TXILEVEL  | \
 				   S3C2410_UCON_RXILEVEL  | \
@@ -127,7 +133,7 @@
 #define	S3C2410_UMCOM_AFC	  (1<<4)
 #define	S3C2410_UMCOM_RTS_LOW	  (1<<0)
 
-#define S3C2412_UMCON_AFC_63	(0<<5)
+#define S3C2412_UMCON_AFC_63	(0<<5)		/* same as s3c2443 */
 #define S3C2412_UMCON_AFC_56	(1<<5)
 #define S3C2412_UMCON_AFC_48	(2<<5)
 #define S3C2412_UMCON_AFC_40	(3<<5)
@@ -143,6 +149,7 @@
 #define S3C2410_UFSTAT_RXMASK	  (15<<0)
 #define S3C2410_UFSTAT_RXSHIFT	  (0)
 
+/* UFSTAT S3C2443 same as S3C2440 */
 #define S3C2440_UFSTAT_TXFULL	  (1<<14)
 #define S3C2440_UFSTAT_RXFULL	  (1<<6)
 #define S3C2440_UFSTAT_TXSHIFT	  (8)
@@ -157,6 +164,8 @@
 #define S3C2410_UERSTAT_OVERRUN	  (1<<0)
 #define S3C2410_UERSTAT_FRAME	  (1<<2)
 #define S3C2410_UERSTAT_BREAK	  (1<<3)
+#define S3C2443_UERSTAT_PARITY	  (1<<1)
+
 #define S3C2410_UERSTAT_ANY	  (S3C2410_UERSTAT_OVERRUN | \
 				   S3C2410_UERSTAT_FRAME | \
 				   S3C2410_UERSTAT_BREAK)
@@ -164,6 +173,8 @@
 #define S3C2410_UMSTAT_CTS	  (1<<0)
 #define S3C2410_UMSTAT_DeltaCTS	  (1<<2)
 
+#define S3C2443_DIVSLOT		  (0x2C)
+
 #ifndef __ASSEMBLY__
 
 /* struct s3c24xx_uart_clksrc
-- 
cgit v1.1


From e9316f9be6bc7cf949a89df6162e25e7fbb867be Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Thu, 15 Feb 2007 16:28:11 +0100
Subject: [ARM] 4196/1: S3C24XX: add S3C2410_IRQSUB() to define IRQ for
 sub-sources

Add a define of S3C2410_IRQSUB() to define all
the sources from the IRQSUB register, to make it
easier to work out the datasheet=>irq mappings

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/arch-s3c2410/irqs.h | 33 ++++++++++++++++++---------------
 1 file changed, 18 insertions(+), 15 deletions(-)

(limited to 'include/asm-arm')

diff --git a/include/asm-arm/arch-s3c2410/irqs.h b/include/asm-arm/arch-s3c2410/irqs.h
index 4b7cff4..f28e2d5 100644
--- a/include/asm-arm/arch-s3c2410/irqs.h
+++ b/include/asm-arm/arch-s3c2410/irqs.h
@@ -94,27 +94,30 @@
  * these need to be ordered in number of appearance in the
  * SUBSRC mask register
 */
-#define IRQ_S3CUART_RX0  S3C2410_IRQ(54)   /* 70 */
-#define IRQ_S3CUART_TX0  S3C2410_IRQ(55)   /* 71 */
-#define IRQ_S3CUART_ERR0 S3C2410_IRQ(56)
 
-#define IRQ_S3CUART_RX1  S3C2410_IRQ(57)
-#define IRQ_S3CUART_TX1  S3C2410_IRQ(58)
-#define IRQ_S3CUART_ERR1 S3C2410_IRQ(59)
+#define S3C2410_IRQSUB(x)	S3C2410_IRQ((x)+54)
 
-#define IRQ_S3CUART_RX2  S3C2410_IRQ(60)
-#define IRQ_S3CUART_TX2  S3C2410_IRQ(61)
-#define IRQ_S3CUART_ERR2 S3C2410_IRQ(62)
+#define IRQ_S3CUART_RX0		S3C2410_IRQSUB(0)	/* 70 */
+#define IRQ_S3CUART_TX0		S3C2410_IRQSUB(1)
+#define IRQ_S3CUART_ERR0	S3C2410_IRQSUB(2)
 
-#define IRQ_TC		 S3C2410_IRQ(63)
-#define IRQ_ADC		 S3C2410_IRQ(64)
+#define IRQ_S3CUART_RX1		S3C2410_IRQSUB(3)	/* 73 */
+#define IRQ_S3CUART_TX1		S3C2410_IRQSUB(4)
+#define IRQ_S3CUART_ERR1	S3C2410_IRQSUB(5)
+
+#define IRQ_S3CUART_RX2		S3C2410_IRQSUB(6)	/* 76 */
+#define IRQ_S3CUART_TX2		S3C2410_IRQSUB(7)
+#define IRQ_S3CUART_ERR2	S3C2410_IRQSUB(8)
+
+#define IRQ_TC			S3C2410_IRQSUB(9)
+#define IRQ_ADC			S3C2410_IRQSUB(10)
 
 /* extra irqs for s3c2440 */
 
-#define IRQ_S3C2440_CAM_C	S3C2410_IRQ(65)
-#define IRQ_S3C2440_CAM_P	S3C2410_IRQ(66)
-#define IRQ_S3C2440_WDT		S3C2410_IRQ(67)
-#define IRQ_S3C2440_AC97	S3C2410_IRQ(68)
+#define IRQ_S3C2440_CAM_C	S3C2410_IRQSUB(11)
+#define IRQ_S3C2440_CAM_P	S3C2410_IRQSUB(12)
+#define IRQ_S3C2440_WDT		S3C2410_IRQSUB(13)
+#define IRQ_S3C2440_AC97	S3C2410_IRQSUB(14)
 
 #define NR_IRQS (IRQ_S3C2440_AC97+1)
 
-- 
cgit v1.1


From f7eee89b2a4b4c233acde621005a814da0eb46d6 Mon Sep 17 00:00:00 2001
From: Andrew Victor <andrew@sanpeople.com>
Date: Thu, 15 Feb 2007 08:17:38 +0100
Subject: [ARM] 4192/1: AT91: Support for AT91SAM9XE processors.

Add support for the Atmel AT91SAM9XE range of processors.  These are
basically AT91SAM9260's with different amounts of internal SRAM and
Flash.

We make use of the existing AT91SAM9260 support, but just perform
run-time detection of the size of the internal SRAM.

Original patch from Nicolas Ferre.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/arch-at91/at91_dbgu.h   | 14 ++++++++++++++
 include/asm-arm/arch-at91/at91sam9260.h |  4 ++++
 include/asm-arm/arch-at91/cpu.h         | 17 ++++++++++++++++-
 3 files changed, 34 insertions(+), 1 deletion(-)

(limited to 'include/asm-arm')

diff --git a/include/asm-arm/arch-at91/at91_dbgu.h b/include/asm-arm/arch-at91/at91_dbgu.h
index 1002a80..b0369e1 100644
--- a/include/asm-arm/arch-at91/at91_dbgu.h
+++ b/include/asm-arm/arch-at91/at91_dbgu.h
@@ -35,6 +35,20 @@
 #define		AT91_CIDR_NVPSIZ	(0xf  << 8)		/* Nonvolatile Program Memory Size */
 #define		AT91_CIDR_NVPSIZ2	(0xf  << 12)		/* Second Nonvolatile Program Memory Size */
 #define		AT91_CIDR_SRAMSIZ	(0xf  << 16)		/* Internal SRAM Size */
+#define			AT91_CIDR_SRAMSIZ_1K	(1 << 16)
+#define			AT91_CIDR_SRAMSIZ_2K	(2 << 16)
+#define			AT91_CIDR_SRAMSIZ_112K	(4 << 16)
+#define			AT91_CIDR_SRAMSIZ_4K	(5 << 16)
+#define			AT91_CIDR_SRAMSIZ_80K	(6 << 16)
+#define			AT91_CIDR_SRAMSIZ_160K	(7 << 16)
+#define			AT91_CIDR_SRAMSIZ_8K	(8 << 16)
+#define			AT91_CIDR_SRAMSIZ_16K	(9 << 16)
+#define			AT91_CIDR_SRAMSIZ_32K	(10 << 16)
+#define			AT91_CIDR_SRAMSIZ_64K	(11 << 16)
+#define			AT91_CIDR_SRAMSIZ_128K	(12 << 16)
+#define			AT91_CIDR_SRAMSIZ_256K	(13 << 16)
+#define			AT91_CIDR_SRAMSIZ_96K	(14 << 16)
+#define			AT91_CIDR_SRAMSIZ_512K	(15 << 16)
 #define		AT91_CIDR_ARCH		(0xff << 20)		/* Architecture Identifier */
 #define		AT91_CIDR_NVPTYP	(7    << 28)		/* Nonvolatile Program Memory Type */
 #define		AT91_CIDR_EXT		(1    << 31)		/* Extension Flag */
diff --git a/include/asm-arm/arch-at91/at91sam9260.h b/include/asm-arm/arch-at91/at91sam9260.h
index 73d93ae..2cadebc 100644
--- a/include/asm-arm/arch-at91/at91sam9260.h
+++ b/include/asm-arm/arch-at91/at91sam9260.h
@@ -113,6 +113,10 @@
 
 #define AT91SAM9260_UHP_BASE	0x00500000	/* USB Host controller */
 
+#define AT91SAM9XE_FLASH_BASE	0x00200000	/* Internal FLASH base address */
+#define AT91SAM9XE_SRAM_BASE	0x00300000	/* Internal SRAM base address */
+
+
 #if 0
 /*
  * PIO pin definitions (peripheral A/B multiplexing).
diff --git a/include/asm-arm/arch-at91/cpu.h b/include/asm-arm/arch-at91/cpu.h
index 9efde0d..d464ca5 100644
--- a/include/asm-arm/arch-at91/cpu.h
+++ b/include/asm-arm/arch-at91/cpu.h
@@ -22,6 +22,9 @@
 #define ARCH_ID_AT91SAM9261	0x019703a0
 #define ARCH_ID_AT91SAM9263	0x019607a0
 
+#define ARCH_ID_AT91SAM9XE128	0x329973a0
+#define ARCH_ID_AT91SAM9XE256	0x329a93a0
+#define ARCH_ID_AT91SAM9XE512	0x329aa3a0
 
 static inline unsigned long at91_cpu_identify(void)
 {
@@ -29,6 +32,16 @@ static inline unsigned long at91_cpu_identify(void)
 }
 
 
+#define ARCH_FAMILY_AT91X92	0x09200000
+#define ARCH_FAMILY_AT91SAM9	0x01900000
+#define ARCH_FAMILY_AT91SAM9XE	0x02900000
+
+static inline unsigned long at91_arch_identify(void)
+{
+	return (at91_sys_read(AT91_DBGU_CIDR) & AT91_CIDR_ARCH);
+}
+
+
 #ifdef CONFIG_ARCH_AT91RM9200
 #define cpu_is_at91rm9200()	(at91_cpu_identify() == ARCH_ID_AT91RM9200)
 #else
@@ -36,8 +49,10 @@ static inline unsigned long at91_cpu_identify(void)
 #endif
 
 #ifdef CONFIG_ARCH_AT91SAM9260
-#define cpu_is_at91sam9260()	(at91_cpu_identify() == ARCH_ID_AT91SAM9260)
+#define cpu_is_at91sam9xe()	(at91_arch_identify() == ARCH_FAMILY_AT91SAM9XE)
+#define cpu_is_at91sam9260()	((at91_cpu_identify() == ARCH_ID_AT91SAM9260) || cpu_is_at91sam9xe())
 #else
+#define cpu_is_at91sam9xe()	(0)
 #define cpu_is_at91sam9260()	(0)
 #endif
 
-- 
cgit v1.1


From 17908ed715e63a02484838b5456fb3fdbd1dfed6 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Thu, 15 Feb 2007 16:35:51 +0100
Subject: [ARM] 4197/1: S3C2443: IRQ number updates

Update IRQ numbers for S3C2443

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/arch-s3c2410/irqs.h | 43 +++++++++++++++++++++++++++++++------
 1 file changed, 37 insertions(+), 6 deletions(-)

(limited to 'include/asm-arm')

diff --git a/include/asm-arm/arch-s3c2410/irqs.h b/include/asm-arm/arch-s3c2410/irqs.h
index f28e2d5..c79cb18 100644
--- a/include/asm-arm/arch-s3c2410/irqs.h
+++ b/include/asm-arm/arch-s3c2410/irqs.h
@@ -34,10 +34,10 @@
 #define IRQ_EINT4t7    S3C2410_IRQ(4)	    /* 20 */
 #define IRQ_EINT8t23   S3C2410_IRQ(5)
 #define IRQ_RESERVED6  S3C2410_IRQ(6)	    /* for s3c2410 */
-#define IRQ_CAM        S3C2410_IRQ(6)	    /* for s3c2440 */
+#define IRQ_CAM        S3C2410_IRQ(6)	    /* for s3c2440,s3c2443 */
 #define IRQ_BATT_FLT   S3C2410_IRQ(7)
 #define IRQ_TICK       S3C2410_IRQ(8)	    /* 24 */
-#define IRQ_WDT	       S3C2410_IRQ(9)
+#define IRQ_WDT	       S3C2410_IRQ(9)	    /* WDT/AC97 for s3c2443 */
 #define IRQ_TIMER0     S3C2410_IRQ(10)
 #define IRQ_TIMER1     S3C2410_IRQ(11)
 #define IRQ_TIMER2     S3C2410_IRQ(12)
@@ -45,7 +45,7 @@
 #define IRQ_TIMER4     S3C2410_IRQ(14)
 #define IRQ_UART2      S3C2410_IRQ(15)
 #define IRQ_LCD	       S3C2410_IRQ(16)	    /* 32 */
-#define IRQ_DMA0       S3C2410_IRQ(17)
+#define IRQ_DMA0       S3C2410_IRQ(17)	    /* IRQ_DMA for s3c2443 */
 #define IRQ_DMA1       S3C2410_IRQ(18)
 #define IRQ_DMA2       S3C2410_IRQ(19)
 #define IRQ_DMA3       S3C2410_IRQ(20)
@@ -114,12 +114,43 @@
 
 /* extra irqs for s3c2440 */
 
-#define IRQ_S3C2440_CAM_C	S3C2410_IRQSUB(11)
-#define IRQ_S3C2440_CAM_P	S3C2410_IRQSUB(12)
+#define IRQ_S3C2440_CAM_C	S3C2410_IRQSUB(11)	/* S3C2443 too */
+#define IRQ_S3C2440_CAM_P	S3C2410_IRQSUB(12)	/* S3C2443 too */
 #define IRQ_S3C2440_WDT		S3C2410_IRQSUB(13)
 #define IRQ_S3C2440_AC97	S3C2410_IRQSUB(14)
 
+/* irqs for s3c2443 */
+
+#define IRQ_S3C2443_DMA		S3C2410_IRQ(17)		/* IRQ_DMA1 */
+#define IRQ_S3C2443_UART3	S3C2410_IRQ(18)		/* IRQ_DMA2 */
+#define IRQ_S3C2443_CFCON	S3C2410_IRQ(19)		/* IRQ_DMA3 */
+#define IRQ_S3C2443_SDI1	S3C2410_IRQ(20)		/* IRQ_SDI */
+#define IRQ_S3C2443_NAND	S3C2410_IRQ(24)		/* reserved */
+
+#define IRQ_S3C2443_LCD1	S3C2410_IRQSUB(14)
+#define IRQ_S3C2443_LCD2	S3C2410_IRQSUB(15)
+#define IRQ_S3C2443_LCD3	S3C2410_IRQSUB(16)
+#define IRQ_S3C2443_LCD4	S3C2410_IRQSUB(17)
+
+#define IRQ_S3C2443_DMA0	S3C2410_IRQSUB(18)
+#define IRQ_S3C2443_DMA1	S3C2410_IRQSUB(19)
+#define IRQ_S3C2443_DMA2	S3C2410_IRQSUB(20)
+#define IRQ_S3C2443_DMA3	S3C2410_IRQSUB(21)
+#define IRQ_S3C2443_DMA4	S3C2410_IRQSUB(22)
+#define IRQ_S3C2443_DMA5	S3C2410_IRQSUB(23)
+
+/* UART3 */
+#define IRQ_S3C2443_RX3		S3C2410_IRQSUB(24)
+#define IRQ_S3C2443_TX3		S3C2410_IRQSUB(25)
+#define IRQ_S3C2443_ERR3	S3C2410_IRQSUB(26)
+
+#define IRQ_S3C2443_WDT		S3C2410_IRQSUB(27)
+#define IRQ_S3C2443_AC97	S3C2410_IRQSUB(28)
+
+#ifdef CONFIG_CPU_S3C2443
+#define NR_IRQS (IRQ_S3C2443_AC97+1)
+#else
 #define NR_IRQS (IRQ_S3C2440_AC97+1)
-
+#endif
 
 #endif /* __ASM_ARCH_IRQ_H */
-- 
cgit v1.1


From e4d06e39530559513c7e335ef7ca4675f8146220 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Fri, 16 Feb 2007 12:12:31 +0100
Subject: [ARM] 4198/2: S3C2443: arch/arm/mach-s3c2443 and related support

Add arch/arm/mach-s3c2443 for support of the Samsung S3C2443 SoC

This patch adds the core CPU support, clock framework, times
and initial IRQ support, as well as adding the directory into
the build tree.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/plat-s3c24xx/cpu.h     |  1 +
 include/asm-arm/plat-s3c24xx/s3c2443.h | 32 ++++++++++++++++++++++++++++++++
 2 files changed, 33 insertions(+)
 create mode 100644 include/asm-arm/plat-s3c24xx/s3c2443.h

(limited to 'include/asm-arm')

diff --git a/include/asm-arm/plat-s3c24xx/cpu.h b/include/asm-arm/plat-s3c24xx/cpu.h
index 8181b22..15dd188 100644
--- a/include/asm-arm/plat-s3c24xx/cpu.h
+++ b/include/asm-arm/plat-s3c24xx/cpu.h
@@ -67,3 +67,4 @@ extern struct sysdev_class s3c2410_sysclass;
 extern struct sysdev_class s3c2412_sysclass;
 extern struct sysdev_class s3c2440_sysclass;
 extern struct sysdev_class s3c2442_sysclass;
+extern struct sysdev_class s3c2443_sysclass;
diff --git a/include/asm-arm/plat-s3c24xx/s3c2443.h b/include/asm-arm/plat-s3c24xx/s3c2443.h
new file mode 100644
index 0000000..11d83b5
--- /dev/null
+++ b/include/asm-arm/plat-s3c24xx/s3c2443.h
@@ -0,0 +1,32 @@
+/* linux/include/asm-arm/plat-s3c24xx/s3c2443.h
+ *
+ * Copyright (c) 2004-2005 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *
+ * Header file for s3c2443 cpu support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#ifdef CONFIG_CPU_S3C2443
+
+struct s3c2410_uartcfg;
+
+extern  int s3c2443_init(void);
+
+extern void s3c2443_map_io(struct map_desc *mach_desc, int size);
+
+extern void s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no);
+
+extern void s3c2443_init_clocks(int xtal);
+
+extern  int s3c2443_baseclk_add(void);
+
+#else
+#define s3c2443_init_clocks NULL
+#define s3c2443_init_uarts NULL
+#define s3c2443_map_io NULL
+#define s3c2443_init NULL
+#endif
-- 
cgit v1.1


From d4156d52c7464e8f25a286e1c2975e91bdbc35d6 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Thu, 15 Feb 2007 22:52:15 +0100
Subject: [ARM] 4204/1: S3C24XX: add hook to specify cpu reset

Add hook code to specify cpu specific reset call

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/arch-s3c2410/reset.h  | 22 ++++++++++++++++++++++
 include/asm-arm/arch-s3c2410/system.h |  6 +++++-
 2 files changed, 27 insertions(+), 1 deletion(-)
 create mode 100644 include/asm-arm/arch-s3c2410/reset.h

(limited to 'include/asm-arm')

diff --git a/include/asm-arm/arch-s3c2410/reset.h b/include/asm-arm/arch-s3c2410/reset.h
new file mode 100644
index 0000000..4f866cd
--- /dev/null
+++ b/include/asm-arm/arch-s3c2410/reset.h
@@ -0,0 +1,22 @@
+/* linux/include/asm-arm/arch-s3c2410/reset.h
+ *
+ * Copyright (c) 2007 Simtec Electronics
+ *	Ben Dooks <ben@simtec.co.uk>
+ *	http://armlinux.simtec.co.uk/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * S3C2410 CPU reset controls
+*/
+
+#ifndef __ASM_ARCH_RESET_H
+#define __ASM_ARCH_RESET_H __FILE__
+
+/* This allows the over-ride of the default reset code
+*/
+
+extern void (*s3c24xx_reset_hook)(void);
+
+#endif /* __ASM_ARCH_RESET_H */
diff --git a/include/asm-arm/arch-s3c2410/system.h b/include/asm-arm/arch-s3c2410/system.h
index 41aeb73..1c74ef1 100644
--- a/include/asm-arm/arch-s3c2410/system.h
+++ b/include/asm-arm/arch-s3c2410/system.h
@@ -15,11 +15,13 @@
 
 #include <asm/arch/map.h>
 #include <asm/arch/idle.h>
+#include <asm/arch/reset.h>
 
 #include <asm/arch/regs-watchdog.h>
 #include <asm/arch/regs-clock.h>
 
 void (*s3c24xx_idle)(void);
+void (*s3c24xx_reset_hook)(void);
 
 void s3c24xx_default_idle(void)
 {
@@ -54,7 +56,6 @@ static void arch_idle(void)
 		s3c24xx_default_idle();
 }
 
-
 static void
 arch_reset(char mode)
 {
@@ -62,6 +63,9 @@ arch_reset(char mode)
 		cpu_reset(0);
 	}
 
+	if (s3c24xx_reset_hook)
+		s3c24xx_reset_hook();
+
 	printk("arch_reset: attempting watchdog reset\n");
 
 	__raw_writel(0, S3C2410_WTCON);	  /* disable watchdog, to be safe  */
-- 
cgit v1.1


From b4f14eb86cda9324a2ffbdf534385d012967acd8 Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Thu, 15 Feb 2007 22:53:52 +0100
Subject: [ARM] 4205/1: S3C2443: Add cpu specific reset hook

Hook in a cpu specific reset function for the S3C2443

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'include/asm-arm')

diff --git a/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h b/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h
index e696554..ff0536d 100644
--- a/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h
+++ b/include/asm-arm/arch-s3c2410/regs-s3c2443-clock.h
@@ -38,6 +38,8 @@
 #define S3C2443_PWRCFG			S3C2443_CLKREG(0x60)
 #define S3C2443_RSTCON			S3C2443_CLKREG(0x64)
 
+#define S3C2443_SWRST_RESET		(0x533c2443)
+
 #define S3C2443_PLLCON_OFF		(1<<24)
 
 #define S3C2443_CLKSRC_I2S_EXT		(1<<14)
-- 
cgit v1.1


From dd1d2f4439af3bc80c047a13a8a2be60df1953cd Mon Sep 17 00:00:00 2001
From: Jan Altenberg <jan@linutronix.de>
Date: Fri, 16 Feb 2007 01:37:10 -0800
Subject: [ARM] at91: correct value for AT91_RSTC_KEY

- Remove a duplicated define for AT91_RSTC_KEY
- Set AT91_RSTC_KEY to the correct value
- Replace the hardcoded keys in at91sam9620.c and at91sam9261.c
  by AT91_RSTC_KEY

Signed-off-by: Jan Altenberg <jan@linutronix.de>
Acked-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/arch-at91/at91_rstc.h | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

(limited to 'include/asm-arm')

diff --git a/include/asm-arm/arch-at91/at91_rstc.h b/include/asm-arm/arch-at91/at91_rstc.h
index 0b7afbc..fb8d161 100644
--- a/include/asm-arm/arch-at91/at91_rstc.h
+++ b/include/asm-arm/arch-at91/at91_rstc.h
@@ -17,7 +17,7 @@
 #define		AT91_RSTC_PROCRST	(1 << 0)		/* Processor Reset */
 #define		AT91_RSTC_PERRST	(1 << 2)		/* Peripheral Reset */
 #define		AT91_RSTC_EXTRST	(1 << 3)		/* External Reset */
-#define		AT91_RSTC_KEY		(0xff << 24)		/* KEY Password */
+#define		AT91_RSTC_KEY		(0xa5 << 24)		/* KEY Password */
 
 #define AT91_RSTC_SR		(AT91_RSTC + 0x04)	/* Reset Controller Status Register */
 #define		AT91_RSTC_URSTS		(1 << 0)		/* User Reset Status */
@@ -34,6 +34,5 @@
 #define		AT91_RSTC_URSTEN	(1 << 0)		/* User Reset Enable */
 #define		AT91_RSTC_URSTIEN	(1 << 4)		/* User Reset Interrupt Enable */
 #define		AT91_RSTC_ERSTL		(0xf << 8)		/* External Reset Length */
-#define		AT91_RSTC_KEY		(0xff << 24)		/* KEY Password */
 
 #endif
-- 
cgit v1.1


From a7eec7b332e83ee63f7db08cc54bf3b4663eed67 Mon Sep 17 00:00:00 2001
From: Arnaud Patard <arnaud.patard@rtp-net.org>
Date: Fri, 16 Feb 2007 22:19:48 +0100
Subject: [ARM] 4213/1: S3C2410 - Update definition of ADCTSC_XY_PST

Update S3C2410_ADCTSC_XY_PST macro to allow setting the ADCTSC_XY_PST
bits.

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/arch-s3c2410/regs-adc.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'include/asm-arm')

diff --git a/include/asm-arm/arch-s3c2410/regs-adc.h b/include/asm-arm/arch-s3c2410/regs-adc.h
index 3196a28..c7f2319 100644
--- a/include/asm-arm/arch-s3c2410/regs-adc.h
+++ b/include/asm-arm/arch-s3c2410/regs-adc.h
@@ -41,7 +41,7 @@
 #define S3C2410_ADCTSC_XP_SEN		(1<<4)
 #define S3C2410_ADCTSC_PULL_UP_DISABLE	(1<<3)
 #define S3C2410_ADCTSC_AUTO_PST		(1<<2)
-#define S3C2410_ADCTSC_XY_PST		(0x3<<0)
+#define S3C2410_ADCTSC_XY_PST(x)	(((x)&0x3)<<0)
 
 /* ADCDAT0 Bits */
 #define S3C2410_ADCDAT0_UPDOWN		(1<<15)
-- 
cgit v1.1


From 52c477a34bd26f246485b04c75f700a0c2a52580 Mon Sep 17 00:00:00 2001
From: Arnaud Patard <arnaud.patard@rtp-net.org>
Date: Fri, 16 Feb 2007 23:50:32 +0100
Subject: [ARM] 4215/1: s3c2410 usb device:  per-platform vbus_draw

Introduce a platform_device (machine) specific callback function
which gets called when the amount of power we can draw from Vbus
has changed.

Signed-off-by: Harald Welte <laforge@openmoko.org>
Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Acked-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/arch-s3c2410/udc.h | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'include/asm-arm')

diff --git a/include/asm-arm/arch-s3c2410/udc.h b/include/asm-arm/arch-s3c2410/udc.h
index 2529eff..e59ec33 100644
--- a/include/asm-arm/arch-s3c2410/udc.h
+++ b/include/asm-arm/arch-s3c2410/udc.h
@@ -12,6 +12,7 @@
  *	14-Mar-2005	RTP	Created file
  *	02-Aug-2005	RTP	File rename
  *	07-Sep-2005	BJD	Minor cleanups, changed cmd to enum
+ *	18-Jan-2007	HMW	Add per-platform vbus_draw function
 */
 
 #ifndef __ASM_ARM_ARCH_UDC_H
@@ -25,6 +26,7 @@ enum s3c2410_udc_cmd_e {
 
 struct s3c2410_udc_mach_info {
 	void	(*udc_command)(enum s3c2410_udc_cmd_e);
+ 	void	(*vbus_draw)(unsigned int ma);
 	unsigned int vbus_pin;
 	unsigned char vbus_pin_inverted;
 };
-- 
cgit v1.1


From 15e4db7b8054ac171de946b9511655446dd29b8f Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Sat, 17 Feb 2007 15:05:17 +0100
Subject: [ARM] 4219/1: S3C2443: DMA source definitions

Defines for the S3C2443 DMA source selection,
and update the maximum channels to 6 if the S3C2443
is selected.

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/arch-s3c2410/dma.h | 36 +++++++++++++++++++++++++++++++++++-
 1 file changed, 35 insertions(+), 1 deletion(-)

(limited to 'include/asm-arm')

diff --git a/include/asm-arm/arch-s3c2410/dma.h b/include/asm-arm/arch-s3c2410/dma.h
index 58ffa7b..c6e8d8f 100644
--- a/include/asm-arm/arch-s3c2410/dma.h
+++ b/include/asm-arm/arch-s3c2410/dma.h
@@ -51,13 +51,19 @@ enum dma_ch {
 	DMACH_UART0_SRC2,	/* s3c2412 second uart sources */
 	DMACH_UART1_SRC2,
 	DMACH_UART2_SRC2,
+	DMACH_UART3,		/* s3c2443 has extra uart */
+	DMACH_UART3_SRC2,
 	DMACH_MAX,		/* the end entry */
 };
 
 #define DMACH_LOW_LEVEL	(1<<28)	/* use this to specifiy hardware ch no */
 
 /* we have 4 dma channels */
-#define S3C2410_DMA_CHANNELS        (4)
+#ifndef CONFIG_CPU_S3C2443
+#define S3C2410_DMA_CHANNELS		(4)
+#else
+#define S3C2410_DMA_CHANNELS		(6)
+#endif
 
 /* types */
 
@@ -321,6 +327,7 @@ extern int s3c2410_dma_set_buffdone_fn(dmach_t, s3c2410_dma_cbfn_t rtn);
 #define S3C2410_DMA_DCDST       (0x1C)
 #define S3C2410_DMA_DMASKTRIG   (0x20)
 #define S3C2412_DMA_DMAREQSEL	(0x24)
+#define S3C2443_DMA_DMAREQSEL	(0x24)
 
 #define S3C2410_DISRCC_INC	(1<<0)
 #define S3C2410_DISRCC_APB	(1<<1)
@@ -415,4 +422,31 @@ extern int s3c2410_dma_set_buffdone_fn(dmach_t, s3c2410_dma_cbfn_t rtn);
 #define S3C2412_DMAREQSEL_UART2_1	S3C2412_DMAREQSEL_SRC(24)
 
 #endif
+
+#define S3C2443_DMAREQSEL_SRC(x)	((x)<<1)
+
+#define S3C2443_DMAREQSEL_HW		(1)
+
+#define S3C2443_DMAREQSEL_SPI0TX	S3C2443_DMAREQSEL_SRC(0)
+#define S3C2443_DMAREQSEL_SPI0RX	S3C2443_DMAREQSEL_SRC(1)
+#define S3C2443_DMAREQSEL_SPI1TX	S3C2443_DMAREQSEL_SRC(2)
+#define S3C2443_DMAREQSEL_SPI1RX	S3C2443_DMAREQSEL_SRC(3)
+#define S3C2443_DMAREQSEL_I2STX		S3C2443_DMAREQSEL_SRC(4)
+#define S3C2443_DMAREQSEL_I2SRX		S3C2443_DMAREQSEL_SRC(5)
+#define S3C2443_DMAREQSEL_TIMER		S3C2443_DMAREQSEL_SRC(9)
+#define S3C2443_DMAREQSEL_SDI		S3C2443_DMAREQSEL_SRC(10)
+#define S3C2443_DMAREQSEL_XDREQ0	S3C2443_DMAREQSEL_SRC(17)
+#define S3C2443_DMAREQSEL_XDREQ1	S3C2443_DMAREQSEL_SRC(18)
+#define S3C2443_DMAREQSEL_UART0_0	S3C2443_DMAREQSEL_SRC(19)
+#define S3C2443_DMAREQSEL_UART0_1	S3C2443_DMAREQSEL_SRC(20)
+#define S3C2443_DMAREQSEL_UART1_0	S3C2443_DMAREQSEL_SRC(21)
+#define S3C2443_DMAREQSEL_UART1_1	S3C2443_DMAREQSEL_SRC(22)
+#define S3C2443_DMAREQSEL_UART2_0	S3C2443_DMAREQSEL_SRC(23)
+#define S3C2443_DMAREQSEL_UART2_1	S3C2443_DMAREQSEL_SRC(24)
+#define S3C2443_DMAREQSEL_UART3_0	S3C2443_DMAREQSEL_SRC(25)
+#define S3C2443_DMAREQSEL_UART3_1	S3C2443_DMAREQSEL_SRC(26)
+#define S3C2443_DMAREQSEL_PCMOUT	S3C2443_DMAREQSEL_SRC(27)
+#define S3C2443_DMAREQSEL_PCMIN 	S3C2443_DMAREQSEL_SRC(28)
+#define S3C2443_DMAREQSEL_MICIN		S3C2443_DMAREQSEL_SRC(29)
+
 #endif /* __ASM_ARCH_DMA_H */
-- 
cgit v1.1


From 48adbcf33b6087727a2db0b517c994a7ecfbeb0c Mon Sep 17 00:00:00 2001
From: Ben Dooks <ben-linux@fluff.org>
Date: Sat, 17 Feb 2007 15:37:14 +0100
Subject: [ARM] 4220/1: S3C24XX: DMA system initialised from sysdev

This patch gets the DMA system for the S3C24XX
ready for the S3C2443, which requires 6 dma channels
at a different stride, and different base IRQ.

The DMA system is now initialised from the same
drivers which apply the DMA mappings, as well
as removing the DMA sysdev intialisation out of
the main init code (which is now being called
from a sysdev probe, so cannot add a new sysdev)

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
---
 include/asm-arm/plat-s3c24xx/dma.h | 7 +++++++
 1 file changed, 7 insertions(+)

(limited to 'include/asm-arm')

diff --git a/include/asm-arm/plat-s3c24xx/dma.h b/include/asm-arm/plat-s3c24xx/dma.h
index 15e140c..2c59406 100644
--- a/include/asm-arm/plat-s3c24xx/dma.h
+++ b/include/asm-arm/plat-s3c24xx/dma.h
@@ -68,3 +68,10 @@ struct s3c24xx_dma_order {
 };
 
 extern int s3c24xx_dma_order_set(struct s3c24xx_dma_order *map);
+
+/* DMA init code, called from the cpu support code */
+
+extern int s3c2410_dma_init(void);
+
+extern int s3c24xx_dma_init(unsigned int channels, unsigned int irq,
+			    unsigned int stride);
-- 
cgit v1.1