From 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Sat, 16 Apr 2005 15:20:36 -0700 Subject: Linux-2.6.12-rc2 Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip! --- include/asm-arm26/a.out.h | 38 +++ include/asm-arm26/assembler.h | 106 ++++++++ include/asm-arm26/atomic.h | 93 +++++++ include/asm-arm26/bitops.h | 332 +++++++++++++++++++++++ include/asm-arm26/bug.h | 17 ++ include/asm-arm26/bugs.h | 15 ++ include/asm-arm26/byteorder.h | 24 ++ include/asm-arm26/cache.h | 11 + include/asm-arm26/cacheflush.h | 52 ++++ include/asm-arm26/checksum.h | 160 +++++++++++ include/asm-arm26/constants.h | 28 ++ include/asm-arm26/cputime.h | 6 + include/asm-arm26/current.h | 15 ++ include/asm-arm26/delay.h | 34 +++ include/asm-arm26/div64.h | 1 + include/asm-arm26/dma-mapping.h | 2 + include/asm-arm26/dma.h | 184 +++++++++++++ include/asm-arm26/ecard.h | 294 ++++++++++++++++++++ include/asm-arm26/elf.h | 77 ++++++ include/asm-arm26/errno.h | 6 + include/asm-arm26/fcntl.h | 87 ++++++ include/asm-arm26/fiq.h | 37 +++ include/asm-arm26/floppy.h | 141 ++++++++++ include/asm-arm26/fpstate.h | 29 ++ include/asm-arm26/hardirq.h | 41 +++ include/asm-arm26/hardware.h | 110 ++++++++ include/asm-arm26/hdreg.h | 1 + include/asm-arm26/ide.h | 34 +++ include/asm-arm26/io.h | 435 ++++++++++++++++++++++++++++++ include/asm-arm26/ioc.h | 72 +++++ include/asm-arm26/ioctl.h | 74 ++++++ include/asm-arm26/ioctls.h | 81 ++++++ include/asm-arm26/ipc.h | 1 + include/asm-arm26/ipcbuf.h | 29 ++ include/asm-arm26/irq.h | 52 ++++ include/asm-arm26/irqchip.h | 101 +++++++ include/asm-arm26/kmap_types.h | 12 + include/asm-arm26/leds.h | 51 ++++ include/asm-arm26/limits.h | 11 + include/asm-arm26/linkage.h | 7 + include/asm-arm26/local.h | 2 + include/asm-arm26/locks.h | 161 +++++++++++ include/asm-arm26/mach-types.h | 37 +++ include/asm-arm26/map.h | 24 ++ include/asm-arm26/mc146818rtc.h | 28 ++ include/asm-arm26/memory.h | 101 +++++++ include/asm-arm26/mman.h | 43 +++ include/asm-arm26/mmu.h | 9 + include/asm-arm26/mmu_context.h | 51 ++++ include/asm-arm26/module.h | 7 + include/asm-arm26/msgbuf.h | 31 +++ include/asm-arm26/namei.h | 25 ++ include/asm-arm26/oldlatches.h | 37 +++ include/asm-arm26/page.h | 115 ++++++++ include/asm-arm26/param.h | 33 +++ include/asm-arm26/parport.h | 18 ++ include/asm-arm26/pci.h | 6 + include/asm-arm26/percpu.h | 6 + include/asm-arm26/pgalloc.h | 70 +++++ include/asm-arm26/pgtable.h | 305 +++++++++++++++++++++ include/asm-arm26/poll.h | 25 ++ include/asm-arm26/posix_types.h | 80 ++++++ include/asm-arm26/proc-fns.h | 49 ++++ include/asm-arm26/processor.h | 113 ++++++++ include/asm-arm26/procinfo.h | 56 ++++ include/asm-arm26/ptrace.h | 104 ++++++++ include/asm-arm26/resource.h | 6 + include/asm-arm26/scatterlist.h | 26 ++ include/asm-arm26/sections.h | 2 + include/asm-arm26/segment.h | 11 + include/asm-arm26/semaphore-helper.h | 84 ++++++ include/asm-arm26/semaphore.h | 103 ++++++++ include/asm-arm26/sembuf.h | 25 ++ include/asm-arm26/serial.h | 63 +++++ include/asm-arm26/setup.h | 205 ++++++++++++++ include/asm-arm26/shmbuf.h | 42 +++ include/asm-arm26/shmparam.h | 15 ++ include/asm-arm26/sigcontext.h | 33 +++ include/asm-arm26/siginfo.h | 6 + include/asm-arm26/signal.h | 201 ++++++++++++++ include/asm-arm26/sizes.h | 52 ++++ include/asm-arm26/smp.h | 10 + include/asm-arm26/socket.h | 50 ++++ include/asm-arm26/sockios.h | 12 + include/asm-arm26/spinlock.h | 6 + include/asm-arm26/stat.h | 77 ++++++ include/asm-arm26/statfs.h | 8 + include/asm-arm26/string.h | 43 +++ include/asm-arm26/suspend.h | 4 + include/asm-arm26/sysirq.h | 61 +++++ include/asm-arm26/system.h | 252 ++++++++++++++++++ include/asm-arm26/termbits.h | 171 ++++++++++++ include/asm-arm26/termios.h | 108 ++++++++ include/asm-arm26/thread_info.h | 144 ++++++++++ include/asm-arm26/timex.h | 29 ++ include/asm-arm26/tlb.h | 78 ++++++ include/asm-arm26/tlbflush.h | 70 +++++ include/asm-arm26/topology.h | 6 + include/asm-arm26/types.h | 61 +++++ include/asm-arm26/uaccess-asm.h | 153 +++++++++++ include/asm-arm26/uaccess.h | 299 +++++++++++++++++++++ include/asm-arm26/ucontext.h | 12 + include/asm-arm26/unaligned.h | 118 +++++++++ include/asm-arm26/uncompress.h | 111 ++++++++ include/asm-arm26/unistd.h | 500 +++++++++++++++++++++++++++++++++++ include/asm-arm26/user.h | 84 ++++++ include/asm-arm26/xor.h | 141 ++++++++++ 107 files changed, 7919 insertions(+) create mode 100644 include/asm-arm26/a.out.h create mode 100644 include/asm-arm26/assembler.h create mode 100644 include/asm-arm26/atomic.h create mode 100644 include/asm-arm26/bitops.h create mode 100644 include/asm-arm26/bug.h create mode 100644 include/asm-arm26/bugs.h create mode 100644 include/asm-arm26/byteorder.h create mode 100644 include/asm-arm26/cache.h create mode 100644 include/asm-arm26/cacheflush.h create mode 100644 include/asm-arm26/checksum.h create mode 100644 include/asm-arm26/constants.h create mode 100644 include/asm-arm26/cputime.h create mode 100644 include/asm-arm26/current.h create mode 100644 include/asm-arm26/delay.h create mode 100644 include/asm-arm26/div64.h create mode 100644 include/asm-arm26/dma-mapping.h create mode 100644 include/asm-arm26/dma.h create mode 100644 include/asm-arm26/ecard.h create mode 100644 include/asm-arm26/elf.h create mode 100644 include/asm-arm26/errno.h create mode 100644 include/asm-arm26/fcntl.h create mode 100644 include/asm-arm26/fiq.h create mode 100644 include/asm-arm26/floppy.h create mode 100644 include/asm-arm26/fpstate.h create mode 100644 include/asm-arm26/hardirq.h create mode 100644 include/asm-arm26/hardware.h create mode 100644 include/asm-arm26/hdreg.h create mode 100644 include/asm-arm26/ide.h create mode 100644 include/asm-arm26/io.h create mode 100644 include/asm-arm26/ioc.h create mode 100644 include/asm-arm26/ioctl.h create mode 100644 include/asm-arm26/ioctls.h create mode 100644 include/asm-arm26/ipc.h create mode 100644 include/asm-arm26/ipcbuf.h create mode 100644 include/asm-arm26/irq.h create mode 100644 include/asm-arm26/irqchip.h create mode 100644 include/asm-arm26/kmap_types.h create mode 100644 include/asm-arm26/leds.h create mode 100644 include/asm-arm26/limits.h create mode 100644 include/asm-arm26/linkage.h create mode 100644 include/asm-arm26/local.h create mode 100644 include/asm-arm26/locks.h create mode 100644 include/asm-arm26/mach-types.h create mode 100644 include/asm-arm26/map.h create mode 100644 include/asm-arm26/mc146818rtc.h create mode 100644 include/asm-arm26/memory.h create mode 100644 include/asm-arm26/mman.h create mode 100644 include/asm-arm26/mmu.h create mode 100644 include/asm-arm26/mmu_context.h create mode 100644 include/asm-arm26/module.h create mode 100644 include/asm-arm26/msgbuf.h create mode 100644 include/asm-arm26/namei.h create mode 100644 include/asm-arm26/oldlatches.h create mode 100644 include/asm-arm26/page.h create mode 100644 include/asm-arm26/param.h create mode 100644 include/asm-arm26/parport.h create mode 100644 include/asm-arm26/pci.h create mode 100644 include/asm-arm26/percpu.h create mode 100644 include/asm-arm26/pgalloc.h create mode 100644 include/asm-arm26/pgtable.h create mode 100644 include/asm-arm26/poll.h create mode 100644 include/asm-arm26/posix_types.h create mode 100644 include/asm-arm26/proc-fns.h create mode 100644 include/asm-arm26/processor.h create mode 100644 include/asm-arm26/procinfo.h create mode 100644 include/asm-arm26/ptrace.h create mode 100644 include/asm-arm26/resource.h create mode 100644 include/asm-arm26/scatterlist.h create mode 100644 include/asm-arm26/sections.h create mode 100644 include/asm-arm26/segment.h create mode 100644 include/asm-arm26/semaphore-helper.h create mode 100644 include/asm-arm26/semaphore.h create mode 100644 include/asm-arm26/sembuf.h create mode 100644 include/asm-arm26/serial.h create mode 100644 include/asm-arm26/setup.h create mode 100644 include/asm-arm26/shmbuf.h create mode 100644 include/asm-arm26/shmparam.h create mode 100644 include/asm-arm26/sigcontext.h create mode 100644 include/asm-arm26/siginfo.h create mode 100644 include/asm-arm26/signal.h create mode 100644 include/asm-arm26/sizes.h create mode 100644 include/asm-arm26/smp.h create mode 100644 include/asm-arm26/socket.h create mode 100644 include/asm-arm26/sockios.h create mode 100644 include/asm-arm26/spinlock.h create mode 100644 include/asm-arm26/stat.h create mode 100644 include/asm-arm26/statfs.h create mode 100644 include/asm-arm26/string.h create mode 100644 include/asm-arm26/suspend.h create mode 100644 include/asm-arm26/sysirq.h create mode 100644 include/asm-arm26/system.h create mode 100644 include/asm-arm26/termbits.h create mode 100644 include/asm-arm26/termios.h create mode 100644 include/asm-arm26/thread_info.h create mode 100644 include/asm-arm26/timex.h create mode 100644 include/asm-arm26/tlb.h create mode 100644 include/asm-arm26/tlbflush.h create mode 100644 include/asm-arm26/topology.h create mode 100644 include/asm-arm26/types.h create mode 100644 include/asm-arm26/uaccess-asm.h create mode 100644 include/asm-arm26/uaccess.h create mode 100644 include/asm-arm26/ucontext.h create mode 100644 include/asm-arm26/unaligned.h create mode 100644 include/asm-arm26/uncompress.h create mode 100644 include/asm-arm26/unistd.h create mode 100644 include/asm-arm26/user.h create mode 100644 include/asm-arm26/xor.h (limited to 'include/asm-arm26') diff --git a/include/asm-arm26/a.out.h b/include/asm-arm26/a.out.h new file mode 100644 index 0000000..9b2702c --- /dev/null +++ b/include/asm-arm26/a.out.h @@ -0,0 +1,38 @@ +#ifndef __ARM_A_OUT_H__ +#define __ARM_A_OUT_H__ + +#include +#include + +struct exec +{ + __u32 a_info; /* Use macros N_MAGIC, etc for access */ + __u32 a_text; /* length of text, in bytes */ + __u32 a_data; /* length of data, in bytes */ + __u32 a_bss; /* length of uninitialized data area for file, in bytes */ + __u32 a_syms; /* length of symbol table data in file, in bytes */ + __u32 a_entry; /* start address */ + __u32 a_trsize; /* length of relocation info for text, in bytes */ + __u32 a_drsize; /* length of relocation info for data, in bytes */ +}; + +/* + * This is always the same + */ +#define N_TXTADDR(a) (0x00008000) + +#define N_TRSIZE(a) ((a).a_trsize) +#define N_DRSIZE(a) ((a).a_drsize) +#define N_SYMSIZE(a) ((a).a_syms) + +#define M_ARM 103 + +#ifdef __KERNEL__ +#define STACK_TOP TASK_SIZE +#endif + +#ifndef LIBRARY_START_TEXT +#define LIBRARY_START_TEXT (0x00c00000) +#endif + +#endif /* __A_OUT_GNU_H__ */ diff --git a/include/asm-arm26/assembler.h b/include/asm-arm26/assembler.h new file mode 100644 index 0000000..83f9aec --- /dev/null +++ b/include/asm-arm26/assembler.h @@ -0,0 +1,106 @@ +/* + * linux/asm/assembler.h + * + * This file contains arm architecture specific defines + * for the different processors. + * + * Do not include any C declarations in this file - it is included by + * assembler source. + */ +#ifndef __ASSEMBLY__ +#error "Only include this from assembly code" +#endif + +/* + * Endian independent macros for shifting bytes within registers. + */ +#define pull lsr +#define push lsl +#define byte(x) (x*8) + +#ifdef __STDC__ +#define LOADREGS(cond, base, reglist...)\ + ldm##cond base,reglist^ + +#define RETINSTR(instr, regs...)\ + instr##s regs +#else +#define LOADREGS(cond, base, reglist...)\ + ldm/**/cond base,reglist^ + +#define RETINSTR(instr, regs...)\ + instr/**/s regs +#endif + +#define MODENOP\ + mov r0, r0 + +#define MODE(savereg,tmpreg,mode) \ + mov savereg, pc; \ + bic tmpreg, savereg, $0x0c000003; \ + orr tmpreg, tmpreg, $mode; \ + teqp tmpreg, $0 + +#define RESTOREMODE(savereg) \ + teqp savereg, $0 + +#define SAVEIRQS(tmpreg) + +#define RESTOREIRQS(tmpreg) + +#define DISABLEIRQS(tmpreg)\ + teqp pc, $0x08000003 + +#define ENABLEIRQS(tmpreg)\ + teqp pc, $0x00000003 + +#define USERMODE(tmpreg)\ + teqp pc, $0x00000000;\ + mov r0, r0 + +#define SVCMODE(tmpreg)\ + teqp pc, $0x00000003;\ + mov r0, r0 + + +/* + * Save the current IRQ state and disable IRQs + * Note that this macro assumes FIQs are enabled, and + * that the processor is in SVC mode. + */ + .macro save_and_disable_irqs, oldcpsr, temp + mov \oldcpsr, pc + orr \temp, \oldcpsr, #0x08000000 + teqp \temp, #0 + .endm + +/* + * Restore interrupt state previously stored in + * a register + * ** Actually do nothing on Arc - hope that the caller uses a MOVS PC soon + * after! + */ + .macro restore_irqs, oldcpsr + @ This be restore_irqs + .endm + +/* + * These two are used to save LR/restore PC over a user-based access. + * The old 26-bit architecture requires that we save lr (R14) + */ + .macro save_lr + str lr, [sp, #-4]! + .endm + + .macro restore_pc + ldmfd sp!, {pc}^ + .endm + +#define USER(x...) \ +9999: x; \ + .section __ex_table,"a"; \ + .align 3; \ + .long 9999b,9001f; \ + .previous + + diff --git a/include/asm-arm26/atomic.h b/include/asm-arm26/atomic.h new file mode 100644 index 0000000..4a88235 --- /dev/null +++ b/include/asm-arm26/atomic.h @@ -0,0 +1,93 @@ +/* + * linux/include/asm-arm26/atomic.h + * + * Copyright (c) 1996 Russell King. + * Modified for arm26 by Ian Molton + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Changelog: + * 25-11-2004 IM Updated for 2.6.9 + * 27-06-1996 RMK Created + * 13-04-1997 RMK Made functions atomic! + * 07-12-1997 RMK Upgraded for v2.1. + * 26-08-1998 PJB Added #ifdef __KERNEL__ + * + * FIXME - its probably worth seeing what these compile into... + */ +#ifndef __ASM_ARM_ATOMIC_H +#define __ASM_ARM_ATOMIC_H + +#include + +#ifdef CONFIG_SMP +#error SMP is NOT supported +#endif + +typedef struct { volatile int counter; } atomic_t; + +#define ATOMIC_INIT(i) { (i) } + +#ifdef __KERNEL__ +#include + +#define atomic_read(v) ((v)->counter) +#define atomic_set(v,i) (((v)->counter) = (i)) + +static inline int atomic_add_return(int i, atomic_t *v) +{ + unsigned long flags; + int val; + + local_irq_save(flags); + val = v->counter; + v->counter = val += i; + local_irq_restore(flags); + + return val; +} + +static inline int atomic_sub_return(int i, atomic_t *v) +{ + unsigned long flags; + int val; + + local_irq_save(flags); + val = v->counter; + v->counter = val -= i; + local_irq_restore(flags); + + return val; +} + +static inline void atomic_clear_mask(unsigned long mask, unsigned long *addr) +{ + unsigned long flags; + + local_irq_save(flags); + *addr &= ~mask; + local_irq_restore(flags); +} + +#define atomic_add(i, v) (void) atomic_add_return(i, v) +#define atomic_inc(v) (void) atomic_add_return(1, v) +#define atomic_sub(i, v) (void) atomic_sub_return(i, v) +#define atomic_dec(v) (void) atomic_sub_return(1, v) + +#define atomic_inc_and_test(v) (atomic_add_return(1, v) == 0) +#define atomic_dec_and_test(v) (atomic_sub_return(1, v) == 0) +#define atomic_inc_return(v) (atomic_add_return(1, v)) +#define atomic_dec_return(v) (atomic_sub_return(1, v)) + +#define atomic_add_negative(i,v) (atomic_add_return(i, v) < 0) + +/* Atomic operations are already serializing on ARM26 */ +#define smp_mb__before_atomic_dec() barrier() +#define smp_mb__after_atomic_dec() barrier() +#define smp_mb__before_atomic_inc() barrier() +#define smp_mb__after_atomic_inc() barrier() + +#endif +#endif diff --git a/include/asm-arm26/bitops.h b/include/asm-arm26/bitops.h new file mode 100644 index 0000000..7d062fb --- /dev/null +++ b/include/asm-arm26/bitops.h @@ -0,0 +1,332 @@ +/* + * Copyright 1995, Russell King. + * + * Based on the arm32 version by RMK (and others). Their copyrights apply to + * Those parts. + * Modified for arm26 by Ian Molton on 25/11/04 + * + * bit 0 is the LSB of an "unsigned long" quantity. + * + * Please note that the code in this file should never be included + * from user space. Many of these are not implemented in assembler + * since they would be too costly. Also, they require privileged + * instructions (which are not available from user mode) to ensure + * that they are atomic. + */ + +#ifndef __ASM_ARM_BITOPS_H +#define __ASM_ARM_BITOPS_H + +#ifdef __KERNEL__ + +#include +#include + +#define smp_mb__before_clear_bit() do { } while (0) +#define smp_mb__after_clear_bit() do { } while (0) + +/* + * These functions are the basis of our bit ops. + * + * First, the atomic bitops. These use native endian. + */ +static inline void ____atomic_set_bit(unsigned int bit, volatile unsigned long *p) +{ + unsigned long flags; + unsigned long mask = 1UL << (bit & 31); + + p += bit >> 5; + + local_irq_save(flags); + *p |= mask; + local_irq_restore(flags); +} + +static inline void ____atomic_clear_bit(unsigned int bit, volatile unsigned long *p) +{ + unsigned long flags; + unsigned long mask = 1UL << (bit & 31); + + p += bit >> 5; + + local_irq_save(flags); + *p &= ~mask; + local_irq_restore(flags); +} + +static inline void ____atomic_change_bit(unsigned int bit, volatile unsigned long *p) +{ + unsigned long flags; + unsigned long mask = 1UL << (bit & 31); + + p += bit >> 5; + + local_irq_save(flags); + *p ^= mask; + local_irq_restore(flags); +} + +static inline int +____atomic_test_and_set_bit(unsigned int bit, volatile unsigned long *p) +{ + unsigned long flags; + unsigned int res; + unsigned long mask = 1UL << (bit & 31); + + p += bit >> 5; + + local_irq_save(flags); + res = *p; + *p = res | mask; + local_irq_restore(flags); + + return res & mask; +} + +static inline int +____atomic_test_and_clear_bit(unsigned int bit, volatile unsigned long *p) +{ + unsigned long flags; + unsigned int res; + unsigned long mask = 1UL << (bit & 31); + + p += bit >> 5; + + local_irq_save(flags); + res = *p; + *p = res & ~mask; + local_irq_restore(flags); + + return res & mask; +} + +static inline int +____atomic_test_and_change_bit(unsigned int bit, volatile unsigned long *p) +{ + unsigned long flags; + unsigned int res; + unsigned long mask = 1UL << (bit & 31); + + p += bit >> 5; + + local_irq_save(flags); + res = *p; + *p = res ^ mask; + local_irq_restore(flags); + + return res & mask; +} + +/* + * Now the non-atomic variants. We let the compiler handle all + * optimisations for these. These are all _native_ endian. + */ +static inline void __set_bit(int nr, volatile unsigned long *p) +{ + p[nr >> 5] |= (1UL << (nr & 31)); +} + +static inline void __clear_bit(int nr, volatile unsigned long *p) +{ + p[nr >> 5] &= ~(1UL << (nr & 31)); +} + +static inline void __change_bit(int nr, volatile unsigned long *p) +{ + p[nr >> 5] ^= (1UL << (nr & 31)); +} + +static inline int __test_and_set_bit(int nr, volatile unsigned long *p) +{ + unsigned long oldval, mask = 1UL << (nr & 31); + + p += nr >> 5; + + oldval = *p; + *p = oldval | mask; + return oldval & mask; +} + +static inline int __test_and_clear_bit(int nr, volatile unsigned long *p) +{ + unsigned long oldval, mask = 1UL << (nr & 31); + + p += nr >> 5; + + oldval = *p; + *p = oldval & ~mask; + return oldval & mask; +} + +static inline int __test_and_change_bit(int nr, volatile unsigned long *p) +{ + unsigned long oldval, mask = 1UL << (nr & 31); + + p += nr >> 5; + + oldval = *p; + *p = oldval ^ mask; + return oldval & mask; +} + +/* + * This routine doesn't need to be atomic. + */ +static inline int __test_bit(int nr, const volatile unsigned long * p) +{ + return (p[nr >> 5] >> (nr & 31)) & 1UL; +} + +/* + * Little endian assembly bitops. nr = 0 -> byte 0 bit 0. + */ +extern void _set_bit_le(int nr, volatile unsigned long * p); +extern void _clear_bit_le(int nr, volatile unsigned long * p); +extern void _change_bit_le(int nr, volatile unsigned long * p); +extern int _test_and_set_bit_le(int nr, volatile unsigned long * p); +extern int _test_and_clear_bit_le(int nr, volatile unsigned long * p); +extern int _test_and_change_bit_le(int nr, volatile unsigned long * p); +extern int _find_first_zero_bit_le(void * p, unsigned size); +extern int _find_next_zero_bit_le(void * p, int size, int offset); +extern int _find_first_bit_le(const unsigned long *p, unsigned size); +extern int _find_next_bit_le(const unsigned long *p, int size, int offset); + +/* + * The __* form of bitops are non-atomic and may be reordered. + */ +#define ATOMIC_BITOP_LE(name,nr,p) \ + (__builtin_constant_p(nr) ? \ + ____atomic_##name(nr, p) : \ + _##name##_le(nr,p)) + +#define NONATOMIC_BITOP(name,nr,p) \ + (____nonatomic_##name(nr, p)) + +/* + * These are the little endian, atomic definitions. + */ +#define set_bit(nr,p) ATOMIC_BITOP_LE(set_bit,nr,p) +#define clear_bit(nr,p) ATOMIC_BITOP_LE(clear_bit,nr,p) +#define change_bit(nr,p) ATOMIC_BITOP_LE(change_bit,nr,p) +#define test_and_set_bit(nr,p) ATOMIC_BITOP_LE(test_and_set_bit,nr,p) +#define test_and_clear_bit(nr,p) ATOMIC_BITOP_LE(test_and_clear_bit,nr,p) +#define test_and_change_bit(nr,p) ATOMIC_BITOP_LE(test_and_change_bit,nr,p) +#define test_bit(nr,p) __test_bit(nr,p) +#define find_first_zero_bit(p,sz) _find_first_zero_bit_le(p,sz) +#define find_next_zero_bit(p,sz,off) _find_next_zero_bit_le(p,sz,off) +#define find_first_bit(p,sz) _find_first_bit_le(p,sz) +#define find_next_bit(p,sz,off) _find_next_bit_le(p,sz,off) + +#define WORD_BITOFF_TO_LE(x) ((x)) + +/* + * ffz = Find First Zero in word. Undefined if no zero exists, + * so code should check against ~0UL first.. + */ +static inline unsigned long ffz(unsigned long word) +{ + int k; + + word = ~word; + k = 31; + if (word & 0x0000ffff) { k -= 16; word <<= 16; } + if (word & 0x00ff0000) { k -= 8; word <<= 8; } + if (word & 0x0f000000) { k -= 4; word <<= 4; } + if (word & 0x30000000) { k -= 2; word <<= 2; } + if (word & 0x40000000) { k -= 1; } + return k; +} + +/* + * ffz = Find First Zero in word. Undefined if no zero exists, + * so code should check against ~0UL first.. + */ +static inline unsigned long __ffs(unsigned long word) +{ + int k; + + k = 31; + if (word & 0x0000ffff) { k -= 16; word <<= 16; } + if (word & 0x00ff0000) { k -= 8; word <<= 8; } + if (word & 0x0f000000) { k -= 4; word <<= 4; } + if (word & 0x30000000) { k -= 2; word <<= 2; } + if (word & 0x40000000) { k -= 1; } + return k; +} + +/* + * fls: find last bit set. + */ + +#define fls(x) generic_fls(x) + +/* + * ffs: find first bit set. This is defined the same way as + * the libc and compiler builtin ffs routines, therefore + * differs in spirit from the above ffz (man ffs). + */ + +#define ffs(x) generic_ffs(x) + +/* + * Find first bit set in a 168-bit bitmap, where the first + * 128 bits are unlikely to be set. + */ +static inline int sched_find_first_bit(unsigned long *b) +{ + unsigned long v; + unsigned int off; + + for (off = 0; v = b[off], off < 4; off++) { + if (unlikely(v)) + break; + } + return __ffs(v) + off * 32; +} + +/* + * hweightN: returns the hamming weight (i.e. the number + * of bits set) of a N-bit word + */ + +#define hweight32(x) generic_hweight32(x) +#define hweight16(x) generic_hweight16(x) +#define hweight8(x) generic_hweight8(x) + +/* + * Ext2 is defined to use little-endian byte ordering. + * These do not need to be atomic. + */ +#define ext2_set_bit(nr,p) \ + __test_and_set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p)) +#define ext2_set_bit_atomic(lock,nr,p) \ + test_and_set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p)) +#define ext2_clear_bit(nr,p) \ + __test_and_clear_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p)) +#define ext2_clear_bit_atomic(lock,nr,p) \ + test_and_clear_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p)) +#define ext2_test_bit(nr,p) \ + __test_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p)) +#define ext2_find_first_zero_bit(p,sz) \ + _find_first_zero_bit_le(p,sz) +#define ext2_find_next_zero_bit(p,sz,off) \ + _find_next_zero_bit_le(p,sz,off) + +/* + * Minix is defined to use little-endian byte ordering. + * These do not need to be atomic. + */ +#define minix_set_bit(nr,p) \ + __set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p)) +#define minix_test_bit(nr,p) \ + __test_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p)) +#define minix_test_and_set_bit(nr,p) \ + __test_and_set_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p)) +#define minix_test_and_clear_bit(nr,p) \ + __test_and_clear_bit(WORD_BITOFF_TO_LE(nr), (unsigned long *)(p)) +#define minix_find_first_zero_bit(p,sz) \ + _find_first_zero_bit_le(p,sz) + +#endif /* __KERNEL__ */ + +#endif /* _ARM_BITOPS_H */ diff --git a/include/asm-arm26/bug.h b/include/asm-arm26/bug.h new file mode 100644 index 0000000..920b705 --- /dev/null +++ b/include/asm-arm26/bug.h @@ -0,0 +1,17 @@ +#ifndef _ASMARM_BUG_H +#define _ASMARM_BUG_H + +#include + +#ifdef CONFIG_DEBUG_BUGVERBOSE +extern volatile void __bug(const char *file, int line, void *data); +/* give file/line information */ +#define BUG() __bug(__FILE__, __LINE__, NULL) +#else +#define BUG() (*(int *)0 = 0) +#endif + +#define HAVE_ARCH_BUG +#include + +#endif diff --git a/include/asm-arm26/bugs.h b/include/asm-arm26/bugs.h new file mode 100644 index 0000000..e99ac2e --- /dev/null +++ b/include/asm-arm26/bugs.h @@ -0,0 +1,15 @@ +/* + * linux/include/asm-arm26/bugs.h + * + * Copyright (C) 1995 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_BUGS_H +#define __ASM_BUGS_H + +#define check_bugs() cpu_check_bugs() + +#endif diff --git a/include/asm-arm26/byteorder.h b/include/asm-arm26/byteorder.h new file mode 100644 index 0000000..0b4af9a --- /dev/null +++ b/include/asm-arm26/byteorder.h @@ -0,0 +1,24 @@ +/* + * linux/include/asm-arm/byteorder.h + * + * ARM Endian-ness. In little endian mode, the data bus is connected such + * that byte accesses appear as: + * 0 = d0...d7, 1 = d8...d15, 2 = d16...d23, 3 = d24...d31 + * and word accesses (data or instruction) appear as: + * d0...d31 + * + */ +#ifndef __ASM_ARM_BYTEORDER_H +#define __ASM_ARM_BYTEORDER_H + +#include + +#if !defined(__STRICT_ANSI__) || defined(__KERNEL__) +# define __BYTEORDER_HAS_U64__ +# define __SWAB_64_THRU_32__ +#endif + +#include + +#endif + diff --git a/include/asm-arm26/cache.h b/include/asm-arm26/cache.h new file mode 100644 index 0000000..f52ca1b --- /dev/null +++ b/include/asm-arm26/cache.h @@ -0,0 +1,11 @@ +/* + * linux/include/asm-arm26/cache.h + */ +#ifndef __ASMARM_CACHE_H +#define __ASMARM_CACHE_H + +#define L1_CACHE_BYTES 32 +#define L1_CACHE_ALIGN(x) (((x)+(L1_CACHE_BYTES-1))&~(L1_CACHE_BYTES-1)) +#define SMP_CACHE_BYTES L1_CACHE_BYTES + +#endif diff --git a/include/asm-arm26/cacheflush.h b/include/asm-arm26/cacheflush.h new file mode 100644 index 0000000..9c1b9c7 --- /dev/null +++ b/include/asm-arm26/cacheflush.h @@ -0,0 +1,52 @@ +/* + * linux/include/asm-arm/cacheflush.h + * + * Copyright (C) 2000-2002 Russell King + * Copyright (C) 2003 Ian Molton + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * ARM26 cache 'functions' + * + */ + +#ifndef _ASMARM_CACHEFLUSH_H +#define _ASMARM_CACHEFLUSH_H + +#if 1 //FIXME - BAD INCLUDES!!! +#include +#include +#endif + +#define flush_cache_all() do { } while (0) +#define flush_cache_mm(mm) do { } while (0) +#define flush_cache_range(vma,start,end) do { } while (0) +#define flush_cache_page(vma,vmaddr,pfn) do { } while (0) +#define flush_cache_vmap(start, end) do { } while (0) +#define flush_cache_vunmap(start, end) do { } while (0) + +#define invalidate_dcache_range(start,end) do { } while (0) +#define clean_dcache_range(start,end) do { } while (0) +#define flush_dcache_range(start,end) do { } while (0) +#define flush_dcache_page(page) do { } while (0) +#define flush_dcache_mmap_lock(mapping) do { } while (0) +#define flush_dcache_mmap_unlock(mapping) do { } while (0) +#define clean_dcache_entry(_s) do { } while (0) +#define clean_cache_entry(_start) do { } while (0) + +#define flush_icache_user_range(start,end, bob, fred) do { } while (0) +#define flush_icache_range(start,end) do { } while (0) +#define flush_icache_page(vma,page) do { } while (0) + +#define copy_to_user_page(vma, page, vaddr, dst, src, len) \ + memcpy(dst, src, len) +#define copy_from_user_page(vma, page, vaddr, dst, src, len) \ + memcpy(dst, src, len) + +/* DAG: ARM3 will flush cache on MEMC updates anyway? so don't bother */ +/* IM : Yes, it will, but only if setup to do so (we do this). */ +#define clean_cache_area(_start,_size) do { } while (0) + +#endif diff --git a/include/asm-arm26/checksum.h b/include/asm-arm26/checksum.h new file mode 100644 index 0000000..d4256d5 --- /dev/null +++ b/include/asm-arm26/checksum.h @@ -0,0 +1,160 @@ +/* + * linux/include/asm-arm/checksum.h + * + * IP checksum routines + * + * Copyright (C) Original authors of ../asm-i386/checksum.h + * Copyright (C) 1996-1999 Russell King + */ +#ifndef __ASM_ARM_CHECKSUM_H +#define __ASM_ARM_CHECKSUM_H + +#include + +/* + * computes the checksum of a memory block at buff, length len, + * and adds in "sum" (32-bit) + * + * returns a 32-bit number suitable for feeding into itself + * or csum_tcpudp_magic + * + * this function must be called with even lengths, except + * for the last fragment, which may be odd + * + * it's best to have buff aligned on a 32-bit boundary + */ +unsigned int csum_partial(const unsigned char * buff, int len, unsigned int sum); + +/* + * the same as csum_partial, but copies from src while it + * checksums, and handles user-space pointer exceptions correctly, when needed. + * + * here even more important to align src and dst on a 32-bit (or even + * better 64-bit) boundary + */ + +unsigned int +csum_partial_copy_nocheck(const char *src, char *dst, int len, int sum); + +unsigned int +csum_partial_copy_from_user(const char __user *src, char *dst, int len, int sum, int *err_ptr); + +/* + * This is the old (and unsafe) way of doing checksums, a warning message will + * be printed if it is used and an exception occurs. + * + * this functions should go away after some time. + */ +#define csum_partial_copy(src,dst,len,sum) csum_partial_copy_nocheck(src,dst,len,sum) + +/* + * This is a version of ip_compute_csum() optimized for IP headers, + * which always checksum on 4 octet boundaries. + */ +static inline unsigned short +ip_fast_csum(unsigned char * iph, unsigned int ihl) +{ + unsigned int sum, tmp1; + + __asm__ __volatile__( + "ldr %0, [%1], #4 @ ip_fast_csum \n\ + ldr %3, [%1], #4 \n\ + sub %2, %2, #5 \n\ + adds %0, %0, %3 \n\ + ldr %3, [%1], #4 \n\ + adcs %0, %0, %3 \n\ + ldr %3, [%1], #4 \n\ +1: adcs %0, %0, %3 \n\ + ldr %3, [%1], #4 \n\ + tst %2, #15 @ do this carefully \n\ + subne %2, %2, #1 @ without destroying \n\ + bne 1b @ the carry flag \n\ + adcs %0, %0, %3 \n\ + adc %0, %0, #0 \n\ + adds %0, %0, %0, lsl #16 \n\ + addcs %0, %0, #0x10000 \n\ + mvn %0, %0 \n\ + mov %0, %0, lsr #16" + : "=r" (sum), "=r" (iph), "=r" (ihl), "=r" (tmp1) + : "1" (iph), "2" (ihl) + : "cc"); + return sum; +} + +/* + * Fold a partial checksum without adding pseudo headers + */ +static inline unsigned int +csum_fold(unsigned int sum) +{ + __asm__( + "adds %0, %1, %1, lsl #16 @ csum_fold \n\ + addcs %0, %0, #0x10000" + : "=r" (sum) + : "r" (sum) + : "cc"); + return (~sum) >> 16; +} + +static inline unsigned int +csum_tcpudp_nofold(unsigned long saddr, unsigned long daddr, unsigned short len, + unsigned int proto, unsigned int sum) +{ + __asm__( + "adds %0, %1, %2 @ csum_tcpudp_nofold \n\ + adcs %0, %0, %3 \n\ + adcs %0, %0, %4 \n\ + adcs %0, %0, %5 \n\ + adc %0, %0, #0" + : "=&r"(sum) + : "r" (sum), "r" (daddr), "r" (saddr), "r" (ntohs(len)), "Ir" (ntohs(proto)) + : "cc"); + return sum; +} +/* + * computes the checksum of the TCP/UDP pseudo-header + * returns a 16-bit checksum, already complemented + */ +static inline unsigned short int +csum_tcpudp_magic(unsigned long saddr, unsigned long daddr, unsigned short len, + unsigned int proto, unsigned int sum) +{ + __asm__( + "adds %0, %1, %2 @ csum_tcpudp_magic \n\ + adcs %0, %0, %3 \n\ + adcs %0, %0, %4 \n\ + adcs %0, %0, %5 \n\ + adc %0, %0, #0 \n\ + adds %0, %0, %0, lsl #16 \n\ + addcs %0, %0, #0x10000 \n\ + mvn %0, %0" + : "=&r"(sum) + : "r" (sum), "r" (daddr), "r" (saddr), "r" (ntohs(len)), "Ir" (ntohs(proto)) + : "cc"); + return sum >> 16; +} + + +/* + * this routine is used for miscellaneous IP-like checksums, mainly + * in icmp.c + */ +static inline unsigned short +ip_compute_csum(unsigned char * buff, int len) +{ + return csum_fold(csum_partial(buff, len, 0)); +} + +#define _HAVE_ARCH_IPV6_CSUM +extern unsigned long +__csum_ipv6_magic(struct in6_addr *saddr, struct in6_addr *daddr, __u32 len, + __u32 proto, unsigned int sum); + +static inline unsigned short int +csum_ipv6_magic(struct in6_addr *saddr, struct in6_addr *daddr, __u32 len, + unsigned short proto, unsigned int sum) +{ + return csum_fold(__csum_ipv6_magic(saddr, daddr, htonl(len), + htonl(proto), sum)); +} +#endif diff --git a/include/asm-arm26/constants.h b/include/asm-arm26/constants.h new file mode 100644 index 0000000..0d0b144 --- /dev/null +++ b/include/asm-arm26/constants.h @@ -0,0 +1,28 @@ +#ifndef __ASM_OFFSETS_H__ +#define __ASM_OFFSETS_H__ +/* + * DO NOT MODIFY. + * + * This file was generated by arch/arm26/Makefile + * + */ + +#define TSK_ACTIVE_MM 96 /* offsetof(struct task_struct, active_mm) */ + +#define VMA_VM_MM 0 /* offsetof(struct vm_area_struct, vm_mm) */ +#define VMA_VM_FLAGS 20 /* offsetof(struct vm_area_struct, vm_flags) */ + +#define VM_EXEC 4 /* VM_EXEC */ + + +#define PAGE_PRESENT 1 /* L_PTE_PRESENT */ +#define PAGE_READONLY 95 /* PAGE_READONLY */ +#define PAGE_NOT_USER 3 /* PAGE_NONE */ +#define PAGE_OLD 3 /* PAGE_NONE */ +#define PAGE_CLEAN 128 /* L_PTE_DIRTY */ + +#define PAGE_SZ 32768 /* PAGE_SIZE */ + +#define SYS_ERROR0 10420224 /* 0x9f0000 */ + +#endif diff --git a/include/asm-arm26/cputime.h b/include/asm-arm26/cputime.h new file mode 100644 index 0000000..d2783a9 --- /dev/null +++ b/include/asm-arm26/cputime.h @@ -0,0 +1,6 @@ +#ifndef __ARM26_CPUTIME_H +#define __ARM26_CPUTIME_H + +#include + +#endif /* __ARM26_CPUTIME_H */ diff --git a/include/asm-arm26/current.h b/include/asm-arm26/current.h new file mode 100644 index 0000000..75d21e2 --- /dev/null +++ b/include/asm-arm26/current.h @@ -0,0 +1,15 @@ +#ifndef _ASMARM_CURRENT_H +#define _ASMARM_CURRENT_H + +#include + +static inline struct task_struct *get_current(void) __attribute_const__; + +static inline struct task_struct *get_current(void) +{ + return current_thread_info()->task; +} + +#define current (get_current()) + +#endif /* _ASMARM_CURRENT_H */ diff --git a/include/asm-arm26/delay.h b/include/asm-arm26/delay.h new file mode 100644 index 0000000..40fbf7b --- /dev/null +++ b/include/asm-arm26/delay.h @@ -0,0 +1,34 @@ +#ifndef __ASM_ARM_DELAY_H +#define __ASM_ARM_DELAY_H + +/* + * Copyright (C) 1995 Russell King + * + * Delay routines, using a pre-computed "loops_per_second" value. + */ + +extern void __delay(int loops); + +/* + * division by multiplication: you don't have to worry about + * loss of precision. + * + * Use only for very small delays ( < 1 msec). Should probably use a + * lookup table, really, as the multiplications take much too long with + * short delays. This is a "reasonable" implementation, though (and the + * first constant multiplications gets optimized away if the delay is + * a constant) + * + * FIXME - lets improve it then... + */ +extern void udelay(unsigned long usecs); + +static inline unsigned long muldiv(unsigned long a, unsigned long b, unsigned long c) +{ + return a * b / c; +} + + + +#endif /* defined(_ARM_DELAY_H) */ + diff --git a/include/asm-arm26/div64.h b/include/asm-arm26/div64.h new file mode 100644 index 0000000..6cd978c --- /dev/null +++ b/include/asm-arm26/div64.h @@ -0,0 +1 @@ +#include diff --git a/include/asm-arm26/dma-mapping.h b/include/asm-arm26/dma-mapping.h new file mode 100644 index 0000000..a95eae0 --- /dev/null +++ b/include/asm-arm26/dma-mapping.h @@ -0,0 +1,2 @@ +#include + diff --git a/include/asm-arm26/dma.h b/include/asm-arm26/dma.h new file mode 100644 index 0000000..995e223 --- /dev/null +++ b/include/asm-arm26/dma.h @@ -0,0 +1,184 @@ +#ifndef __ASM_ARM_DMA_H +#define __ASM_ARM_DMA_H + +typedef unsigned int dmach_t; + +#include +#include +#include +#include +#include + +// FIXME - do we really need this? arm26 cant do 'proper' DMA + +typedef struct dma_struct dma_t; +typedef unsigned int dmamode_t; + +struct dma_ops { + int (*request)(dmach_t, dma_t *); /* optional */ + void (*free)(dmach_t, dma_t *); /* optional */ + void (*enable)(dmach_t, dma_t *); /* mandatory */ + void (*disable)(dmach_t, dma_t *); /* mandatory */ + int (*residue)(dmach_t, dma_t *); /* optional */ + int (*setspeed)(dmach_t, dma_t *, int); /* optional */ + char *type; +}; + +struct dma_struct { + struct scatterlist buf; /* single DMA */ + int sgcount; /* number of DMA SG */ + struct scatterlist *sg; /* DMA Scatter-Gather List */ + + unsigned int active:1; /* Transfer active */ + unsigned int invalid:1; /* Address/Count changed */ + unsigned int using_sg:1; /* using scatter list? */ + dmamode_t dma_mode; /* DMA mode */ + int speed; /* DMA speed */ + + unsigned int lock; /* Device is allocated */ + const char *device_id; /* Device name */ + + unsigned int dma_base; /* Controller base address */ + int dma_irq; /* Controller IRQ */ + int state; /* Controller state */ + struct scatterlist cur_sg; /* Current controller buffer */ + + struct dma_ops *d_ops; +}; + +/* Prototype: void arch_dma_init(dma) + * Purpose : Initialise architecture specific DMA + * Params : dma - pointer to array of DMA structures + */ +extern void arch_dma_init(dma_t *dma); + +extern void isa_init_dma(dma_t *dma); + + +#define MAX_DMA_ADDRESS 0x03000000 +#define MAX_DMA_CHANNELS 3 + +/* ARC */ +#define DMA_VIRTUAL_FLOPPY0 0 +#define DMA_VIRTUAL_FLOPPY1 1 +#define DMA_VIRTUAL_SOUND 2 + +/* A5K */ +#define DMA_FLOPPY 0 + +/* + * DMA modes + */ +#define DMA_MODE_MASK 3 + +#define DMA_MODE_READ 0 +#define DMA_MODE_WRITE 1 +#define DMA_MODE_CASCADE 2 +#define DMA_AUTOINIT 4 + +extern spinlock_t dma_spin_lock; + +static inline unsigned long claim_dma_lock(void) +{ + unsigned long flags; + spin_lock_irqsave(&dma_spin_lock, flags); + return flags; +} + +static inline void release_dma_lock(unsigned long flags) +{ + spin_unlock_irqrestore(&dma_spin_lock, flags); +} + +/* Clear the 'DMA Pointer Flip Flop'. + * Write 0 for LSB/MSB, 1 for MSB/LSB access. + */ +#define clear_dma_ff(channel) + +/* Set only the page register bits of the transfer address. + * + * NOTE: This is an architecture specific function, and should + * be hidden from the drivers + */ +extern void set_dma_page(dmach_t channel, char pagenr); + +/* Request a DMA channel + * + * Some architectures may need to do allocate an interrupt + */ +extern int request_dma(dmach_t channel, const char * device_id); + +/* Free a DMA channel + * + * Some architectures may need to do free an interrupt + */ +extern void free_dma(dmach_t channel); + +/* Enable DMA for this channel + * + * On some architectures, this may have other side effects like + * enabling an interrupt and setting the DMA registers. + */ +extern void enable_dma(dmach_t channel); + +/* Disable DMA for this channel + * + * On some architectures, this may have other side effects like + * disabling an interrupt or whatever. + */ +extern void disable_dma(dmach_t channel); + +/* Test whether the specified channel has an active DMA transfer + */ +extern int dma_channel_active(dmach_t channel); + +/* Set the DMA scatter gather list for this channel + * + * This should not be called if a DMA channel is enabled, + * especially since some DMA architectures don't update the + * DMA address immediately, but defer it to the enable_dma(). + */ +extern void set_dma_sg(dmach_t channel, struct scatterlist *sg, int nr_sg); + +/* Set the DMA address for this channel + * + * This should not be called if a DMA channel is enabled, + * especially since some DMA architectures don't update the + * DMA address immediately, but defer it to the enable_dma(). + */ +extern void set_dma_addr(dmach_t channel, unsigned long physaddr); + +/* Set the DMA byte count for this channel + * + * This should not be called if a DMA channel is enabled, + * especially since some DMA architectures don't update the + * DMA count immediately, but defer it to the enable_dma(). + */ +extern void set_dma_count(dmach_t channel, unsigned long count); + +/* Set the transfer direction for this channel + * + * This should not be called if a DMA channel is enabled, + * especially since some DMA architectures don't update the + * DMA transfer direction immediately, but defer it to the + * enable_dma(). + */ +extern void set_dma_mode(dmach_t channel, dmamode_t mode); + +/* Set the transfer speed for this channel + */ +extern void set_dma_speed(dmach_t channel, int cycle_ns); + +/* Get DMA residue count. After a DMA transfer, this + * should return zero. Reading this while a DMA transfer is + * still in progress will return unpredictable results. + * If called before the channel has been used, it may return 1. + * Otherwise, it returns the number of _bytes_ left to transfer. + */ +extern int get_dma_residue(dmach_t channel); + +#ifndef NO_DMA +#define NO_DMA 255 +#endif + +#endif /* _ARM_DMA_H */ diff --git a/include/asm-arm26/ecard.h b/include/asm-arm26/ecard.h new file mode 100644 index 0000000..6669193 --- /dev/null +++ b/include/asm-arm26/ecard.h @@ -0,0 +1,294 @@ +/* + * linux/include/asm-arm26/ecard.h + * + * definitions for expansion cards + * + * This is a new system as from Linux 1.2.3 + * + * Changelog: + * 11-12-1996 RMK Further minor improvements + * 12-09-1997 RMK Added interrupt enable/disable for card level + * 18-05-2003 IM Adjusted for ARM26 + * + * Reference: Acorns Risc OS 3 Programmers Reference Manuals. + */ + +#ifndef __ASM_ECARD_H +#define __ASM_ECARD_H + +/* + * Currently understood cards (but not necessarily + * supported): + * Manufacturer Product ID + */ +#define MANU_ACORN 0x0000 +#define PROD_ACORN_SCSI 0x0002 +#define PROD_ACORN_ETHER1 0x0003 +#define PROD_ACORN_MFM 0x000b + +#define MANU_CCONCEPTS 0x0009 +#define PROD_CCONCEPTS_COLOURCARD 0x0050 + +#define MANU_ANT2 0x0011 +#define PROD_ANT_ETHER3 0x00a4 + +#define MANU_ATOMWIDE 0x0017 +#define PROD_ATOMWIDE_3PSERIAL 0x0090 + +#define MANU_IRLAM_INSTRUMENTS 0x001f +#define MANU_IRLAM_INSTRUMENTS_ETHERN 0x5678 + +#define MANU_OAK 0x0021 +#define PROD_OAK_SCSI 0x0058 + +#define MANU_MORLEY 0x002b +#define PROD_MORLEY_SCSI_UNCACHED 0x0067 + +#define MANU_CUMANA 0x003a +#define PROD_CUMANA_SCSI_2 0x003a +#define PROD_CUMANA_SCSI_1 0x00a0 + +#define MANU_ICS 0x003c +#define PROD_ICS_IDE 0x00ae + +#define MANU_ICS2 0x003d +#define PROD_ICS2_IDE 0x00ae + +#define MANU_SERPORT 0x003f +#define PROD_SERPORT_DSPORT 0x00b9 + +#define MANU_ARXE 0x0041 +#define PROD_ARXE_SCSI 0x00be + +#define MANU_I3 0x0046 +#define PROD_I3_ETHERLAN500 0x00d4 +#define PROD_I3_ETHERLAN600 0x00ec +#define PROD_I3_ETHERLAN600A 0x011e + +#define MANU_ANT 0x0053 +#define PROD_ANT_ETHERM 0x00d8 +#define PROD_ANT_ETHERB 0x00e4 + +#define MANU_ALSYSTEMS 0x005b +#define PROD_ALSYS_SCSIATAPI 0x0107 + +#define MANU_MCS 0x0063 +#define PROD_MCS_CONNECT32 0x0125 + +#define MANU_EESOX 0x0064 +#define PROD_EESOX_SCSI2 0x008c + +#define MANU_YELLOWSTONE 0x0096 +#define PROD_YELLOWSTONE_RAPIDE32 0x0120 + +#define MANU_SIMTEC 0x005f +#define PROD_SIMTEC_IDE8 0x0130 +#define PROD_SIMTEC_IDE16 0x0131 + + +#ifdef ECARD_C +#define CONST +#else +#define CONST const +#endif + +#define MAX_ECARDS 4 + +typedef enum { /* Cards address space */ + ECARD_IOC, + ECARD_MEMC, + ECARD_EASI +} card_type_t; + +typedef enum { /* Speed for ECARD_IOC space */ + ECARD_SLOW = 0, + ECARD_MEDIUM = 1, + ECARD_FAST = 2, + ECARD_SYNC = 3 +} card_speed_t; + +struct ecard_id { /* Card ID structure */ + unsigned short manufacturer; + unsigned short product; + void *data; +}; + +struct in_ecid { /* Packed card ID information */ + unsigned short product; /* Product code */ + unsigned short manufacturer; /* Manufacturer code */ + unsigned char id:4; /* Simple ID */ + unsigned char cd:1; /* Chunk dir present */ + unsigned char is:1; /* Interrupt status pointers */ + unsigned char w:2; /* Width */ + unsigned char country; /* Country */ + unsigned char irqmask; /* IRQ mask */ + unsigned char fiqmask; /* FIQ mask */ + unsigned long irqoff; /* IRQ offset */ + unsigned long fiqoff; /* FIQ offset */ +}; + +typedef struct expansion_card ecard_t; +typedef unsigned long *loader_t; + +typedef struct { /* Card handler routines */ + void (*irqenable)(ecard_t *ec, int irqnr); + void (*irqdisable)(ecard_t *ec, int irqnr); + int (*irqpending)(ecard_t *ec); + void (*fiqenable)(ecard_t *ec, int fiqnr); + void (*fiqdisable)(ecard_t *ec, int fiqnr); + int (*fiqpending)(ecard_t *ec); +} expansioncard_ops_t; + +#define ECARD_NUM_RESOURCES (6) + +#define ECARD_RES_IOCSLOW (0) +#define ECARD_RES_IOCMEDIUM (1) +#define ECARD_RES_IOCFAST (2) +#define ECARD_RES_IOCSYNC (3) +#define ECARD_RES_MEMC (4) +#define ECARD_RES_EASI (5) + +#define ecard_resource_start(ec,nr) ((ec)->resource[nr].start) +#define ecard_resource_end(ec,nr) ((ec)->resource[nr].end) +#define ecard_resource_len(ec,nr) ((ec)->resource[nr].end - \ + (ec)->resource[nr].start + 1) + +/* + * This contains all the info needed on an expansion card + */ +struct expansion_card { + struct expansion_card *next; + + struct device dev; + struct resource resource[ECARD_NUM_RESOURCES]; + + /* Public data */ + volatile unsigned char *irqaddr; /* address of IRQ register */ + volatile unsigned char *fiqaddr; /* address of FIQ register */ + unsigned char irqmask; /* IRQ mask */ + unsigned char fiqmask; /* FIQ mask */ + unsigned char claimed; /* Card claimed? */ + + void *irq_data; /* Data for use for IRQ by card */ + void *fiq_data; /* Data for use for FIQ by card */ + const expansioncard_ops_t *ops; /* Enable/Disable Ops for card */ + + CONST unsigned int slot_no; /* Slot number */ + CONST unsigned int dma; /* DMA number (for request_dma) */ + CONST unsigned int irq; /* IRQ number (for request_irq) */ + CONST unsigned int fiq; /* FIQ number (for request_irq) */ + CONST card_type_t type; /* Type of card */ + CONST struct in_ecid cid; /* Card Identification */ + + /* Private internal data */ + const char *card_desc; /* Card description */ + CONST unsigned int podaddr; /* Base Linux address for card */ + CONST loader_t loader; /* loader program */ + u64 dma_mask; +}; + +struct in_chunk_dir { + unsigned int start_offset; + union { + unsigned char string[256]; + unsigned char data[1]; + } d; +}; + +/* + * ecard_claim: claim an expansion card entry + * FIXME - are these atomic / called with interrupts off ? + */ +#define ecard_claim(ec) ((ec)->claimed = 1) + +/* + * ecard_release: release an expansion card entry + */ +#define ecard_release(ec) ((ec)->claimed = 0) + +/* + * Read a chunk from an expansion card + * cd : where to put read data + * ec : expansion card info struct + * id : id number to find + * num: (n+1)'th id to find. + */ +extern int ecard_readchunk (struct in_chunk_dir *cd, struct expansion_card *ec, int id, int num); + +/* + * Obtain the address of a card + */ +extern unsigned int ecard_address (struct expansion_card *ec, card_type_t card_type, card_speed_t speed); + +#ifdef ECARD_C +/* Definitions internal to ecard.c - for it's use only!! + * + * External expansion card header as read from the card + */ +struct ex_ecid { + unsigned char r_irq:1; + unsigned char r_zero:1; + unsigned char r_fiq:1; + unsigned char r_id:4; + unsigned char r_a:1; + + unsigned char r_cd:1; + unsigned char r_is:1; + unsigned char r_w:2; + unsigned char r_r1:4; + + unsigned char r_r2:8; + + unsigned char r_prod[2]; + + unsigned char r_manu[2]; + + unsigned char r_country; + + unsigned char r_irqmask; + unsigned char r_irqoff[3]; + + unsigned char r_fiqmask; + unsigned char r_fiqoff[3]; +}; + +/* + * Chunk directory entry as read from the card + */ +struct ex_chunk_dir { + unsigned char r_id; + unsigned char r_len[3]; + unsigned long r_start; + union { + char string[256]; + char data[1]; + } d; +#define c_id(x) ((x)->r_id) +#define c_len(x) ((x)->r_len[0]|((x)->r_len[1]<<8)|((x)->r_len[2]<<16)) +#define c_start(x) ((x)->r_start) +}; + +#endif + +extern struct bus_type ecard_bus_type; + +#define ECARD_DEV(_d) container_of((_d), struct expansion_card, dev) + +struct ecard_driver { + int (*probe)(struct expansion_card *, const struct ecard_id *id); + void (*remove)(struct expansion_card *); + void (*shutdown)(struct expansion_card *); + const struct ecard_id *id_table; + unsigned int id; + struct device_driver drv; +}; + +#define ECARD_DRV(_d) container_of((_d), struct ecard_driver, drv) + +#define ecard_set_drvdata(ec,data) dev_set_drvdata(&(ec)->dev, (data)) +#define ecard_get_drvdata(ec) dev_get_drvdata(&(ec)->dev) + +int ecard_register_driver(struct ecard_driver *); +void ecard_remove_driver(struct ecard_driver *); + +#endif diff --git a/include/asm-arm26/elf.h b/include/asm-arm26/elf.h new file mode 100644 index 0000000..8b14947 --- /dev/null +++ b/include/asm-arm26/elf.h @@ -0,0 +1,77 @@ +#ifndef __ASMARM_ELF_H +#define __ASMARM_ELF_H + +/* + * ELF register definitions.. + */ + +#include +#include + +//FIXME - is it always 32K ? + +#define ELF_EXEC_PAGESIZE 32768 +#define SET_PERSONALITY(ex,ibcs2) set_personality(PER_LINUX) + +typedef unsigned long elf_greg_t; +typedef unsigned long elf_freg_t[3]; + +#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t)) +typedef elf_greg_t elf_gregset_t[ELF_NGREG]; + +typedef struct { void *null; } elf_fpregset_t; + +/* + * This is used to ensure we don't load something for the wrong architecture. + * We can only execute 26-bit code. + */ + +#define EM_ARM 40 +#define EF_ARM_APCS26 0x08 + +//#define elf_check_arch(x) ( ((x)->e_machine == EM_ARM) && ((x)->e_flags & EF_ARM_APCS26) ) FIXME!!!!! - this looks OK, but the flags seem to be wrong. +#define elf_check_arch(x) (1) + +/* + * These are used to set parameters in the core dumps. + */ +#define ELF_CLASS ELFCLASS32 +#define ELF_DATA ELFDATA2LSB; +#define ELF_ARCH EM_ARM + +#define USE_ELF_CORE_DUMP + +/* This is the location that an ET_DYN program is loaded if exec'ed. Typical + use of this is to invoke "./ld.so someprog" to test out a new version of + the loader. We need to make sure that it is out of the way of the program + that it will "exec", and that there is sufficient room for the brk. */ + +#define ELF_ET_DYN_BASE (2 * TASK_SIZE / 3) + +/* When the program starts, a1 contains a pointer to a function to be + registered with atexit, as per the SVR4 ABI. A value of 0 means we + have no such handler. */ +#define ELF_PLAT_INIT(_r, load_addr) (_r)->ARM_r0 = 0 + +/* This yields a mask that user programs can use to figure out what + instruction set this cpu supports. */ + +extern unsigned int elf_hwcap; +#define ELF_HWCAP (elf_hwcap) + +/* This yields a string that ld.so will use to load implementation + specific libraries for optimization. This is more specific in + intent than poking at uname or /proc/cpuinfo. */ + +/* For now we just provide a fairly general string that describes the + processor family. This could be made more specific later if someone + implemented optimisations that require it. 26-bit CPUs give you + "v1l" for ARM2 (no SWP) and "v2l" for anything else (ARM1 isn't + supported). + */ + +#define ELF_PLATFORM_SIZE 8 +extern char elf_platform[]; +#define ELF_PLATFORM (elf_platform) + +#endif diff --git a/include/asm-arm26/errno.h b/include/asm-arm26/errno.h new file mode 100644 index 0000000..6e60f06 --- /dev/null +++ b/include/asm-arm26/errno.h @@ -0,0 +1,6 @@ +#ifndef _ARM_ERRNO_H +#define _ARM_ERRNO_H + +#include + +#endif diff --git a/include/asm-arm26/fcntl.h b/include/asm-arm26/fcntl.h new file mode 100644 index 0000000..485b6bd --- /dev/null +++ b/include/asm-arm26/fcntl.h @@ -0,0 +1,87 @@ +#ifndef _ARM_FCNTL_H +#define _ARM_FCNTL_H + +/* open/fcntl - O_SYNC is only implemented on blocks devices and on files + located on an ext2 file system */ +#define O_ACCMODE 0003 +#define O_RDONLY 00 +#define O_WRONLY 01 +#define O_RDWR 02 +#define O_CREAT 0100 /* not fcntl */ +#define O_EXCL 0200 /* not fcntl */ +#define O_NOCTTY 0400 /* not fcntl */ +#define O_TRUNC 01000 /* not fcntl */ +#define O_APPEND 02000 +#define O_NONBLOCK 04000 +#define O_NDELAY O_NONBLOCK +#define O_SYNC 010000 +#define FASYNC 020000 /* fcntl, for BSD compatibility */ +#define O_DIRECTORY 040000 /* must be a directory */ +#define O_NOFOLLOW 0100000 /* don't follow links */ +#define O_DIRECT 0200000 /* direct disk access hint - currently ignored */ +#define O_LARGEFILE 0400000 +#define O_NOATIME 01000000 + +#define F_DUPFD 0 /* dup */ +#define F_GETFD 1 /* get close_on_exec */ +#define F_SETFD 2 /* set/clear close_on_exec */ +#define F_GETFL 3 /* get file->f_flags */ +#define F_SETFL 4 /* set file->f_flags */ +#define F_GETLK 5 +#define F_SETLK 6 +#define F_SETLKW 7 + +#define F_SETOWN 8 /* for sockets. */ +#define F_GETOWN 9 /* for sockets. */ +#define F_SETSIG 10 /* for sockets. */ +#define F_GETSIG 11 /* for sockets. */ + +#define F_GETLK64 12 /* using 'struct flock64' */ +#define F_SETLK64 13 +#define F_SETLKW64 14 + +/* for F_[GET|SET]FL */ +#define FD_CLOEXEC 1 /* actually anything with low bit set goes */ + +/* for posix fcntl() and lockf() */ +#define F_RDLCK 0 +#define F_WRLCK 1 +#define F_UNLCK 2 + +/* for old implementation of bsd flock () */ +#define F_EXLCK 4 /* or 3 */ +#define F_SHLCK 8 /* or 4 */ + +/* for leases */ +#define F_INPROGRESS 16 + +/* operations for bsd flock(), also used by the kernel implementation */ +#define LOCK_SH 1 /* shared lock */ +#define LOCK_EX 2 /* exclusive lock */ +#define LOCK_NB 4 /* or'd with one of the above to prevent + blocking */ +#define LOCK_UN 8 /* remove lock */ + +#define LOCK_MAND 32 /* This is a mandatory flock */ +#define LOCK_READ 64 /* ... Which allows concurrent read operations */ +#define LOCK_WRITE 128 /* ... Which allows concurrent write operations */ +#define LOCK_RW 192 /* ... Which allows concurrent read & write ops */ + +struct flock { + short l_type; + short l_whence; + off_t l_start; + off_t l_len; + pid_t l_pid; +}; + +struct flock64 { + short l_type; + short l_whence; + loff_t l_start; + loff_t l_len; + pid_t l_pid; +}; + +#define F_LINUX_SPECIFIC_BASE 1024 +#endif diff --git a/include/asm-arm26/fiq.h b/include/asm-arm26/fiq.h new file mode 100644 index 0000000..a3bad09 --- /dev/null +++ b/include/asm-arm26/fiq.h @@ -0,0 +1,37 @@ +/* + * linux/include/asm-arm/fiq.h + * + * Support for FIQ on ARM architectures. + * Written by Philip Blundell , 1998 + * Re-written by Russell King + */ + +#ifndef __ASM_FIQ_H +#define __ASM_FIQ_H + +#include + +struct fiq_handler { + struct fiq_handler *next; + /* Name + */ + const char *name; + /* Called to ask driver to relinquish/ + * reacquire FIQ + * return zero to accept, or - + */ + int (*fiq_op)(void *, int relinquish); + /* data for the relinquish/reacquire functions + */ + void *dev_id; +}; + +extern int claim_fiq(struct fiq_handler *f); +extern void release_fiq(struct fiq_handler *f); +extern void set_fiq_handler(void *start, unsigned int length); +extern void set_fiq_regs(struct pt_regs *regs); +extern void get_fiq_regs(struct pt_regs *regs); +extern void enable_fiq(int fiq); +extern void disable_fiq(int fiq); + +#endif diff --git a/include/asm-arm26/floppy.h b/include/asm-arm26/floppy.h new file mode 100644 index 0000000..9e090ad --- /dev/null +++ b/include/asm-arm26/floppy.h @@ -0,0 +1,141 @@ +/* + * linux/include/asm-arm/floppy.h + * + * Copyright (C) 1996-2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Note that we don't touch FLOPPY_DMA nor FLOPPY_IRQ here + */ +#ifndef __ASM_ARM_FLOPPY_H +#define __ASM_ARM_FLOPPY_H + +#define fd_outb(val,port) \ + do { \ + if ((port) == FD_DOR) \ + fd_setdor((val)); \ + else \ + outb((val),(port)); \ + } while(0) + +#define fd_inb(port) inb((port)) +#define fd_request_irq() request_irq(IRQ_FLOPPYDISK,floppy_interrupt,\ + SA_INTERRUPT|SA_SAMPLE_RANDOM,"floppy",NULL) +#define fd_free_irq() free_irq(IRQ_FLOPPYDISK,NULL) +#define fd_disable_irq() disable_irq(IRQ_FLOPPYDISK) +#define fd_enable_irq() enable_irq(IRQ_FLOPPYDISK) + +#define fd_request_dma() request_dma(DMA_FLOPPY,"floppy") +#define fd_free_dma() free_dma(DMA_FLOPPY) +#define fd_disable_dma() disable_dma(DMA_FLOPPY) +#define fd_enable_dma() enable_dma(DMA_FLOPPY) +#define fd_clear_dma_ff() clear_dma_ff(DMA_FLOPPY) +#define fd_set_dma_mode(mode) set_dma_mode(DMA_FLOPPY, (mode)) +#define fd_set_dma_addr(addr) set_dma_addr(DMA_FLOPPY, virt_to_bus((addr))) +#define fd_set_dma_count(len) set_dma_count(DMA_FLOPPY, (len)) +#define fd_cacheflush(addr,sz) + +/* need to clean up dma.h */ +#define DMA_FLOPPYDISK DMA_FLOPPY + +/* Floppy_selects is the list of DOR's to select drive fd + * + * On initialisation, the floppy list is scanned, and the drives allocated + * in the order that they are found. This is done by seeking the drive + * to a non-zero track, and then restoring it to track 0. If an error occurs, + * then there is no floppy drive present. [to be put back in again] + */ +static unsigned char floppy_selects[2][4] = +{ + { 0x10, 0x21, 0x23, 0x33 }, + { 0x10, 0x21, 0x23, 0x33 } +}; + +#define fd_setdor(dor) \ +do { \ + int new_dor = (dor); \ + if (new_dor & 0xf0) \ + new_dor = (new_dor & 0x0c) | floppy_selects[fdc][new_dor & 3]; \ + else \ + new_dor &= 0x0c; \ + outb(new_dor, FD_DOR); \ +} while (0) + +/* + * Someday, we'll automatically detect which drives are present... + */ +static inline void fd_scandrives (void) +{ +#if 0 + int floppy, drive_count; + + fd_disable_irq(); + raw_cmd = &default_raw_cmd; + raw_cmd->flags = FD_RAW_SPIN | FD_RAW_NEED_SEEK; + raw_cmd->track = 0; + raw_cmd->rate = ?; + drive_count = 0; + for (floppy = 0; floppy < 4; floppy ++) { + current_drive = drive_count; + /* + * Turn on floppy motor + */ + if (start_motor(redo_fd_request)) + continue; + /* + * Set up FDC + */ + fdc_specify(); + /* + * Tell FDC to recalibrate + */ + output_byte(FD_RECALIBRATE); + LAST_OUT(UNIT(floppy)); + /* wait for command to complete */ + if (!successful) { + int i; + for (i = drive_count; i < 3; i--) + floppy_selects[fdc][i] = floppy_selects[fdc][i + 1]; + floppy_selects[fdc][3] = 0; + floppy -= 1; + } else + drive_count++; + } +#else + floppy_selects[0][0] = 0x10; + floppy_selects[0][1] = 0x21; + floppy_selects[0][2] = 0x23; + floppy_selects[0][3] = 0x33; +#endif +} + +#define FDC1 (0x3f0) + +#define FLOPPY0_TYPE 4 +#define FLOPPY1_TYPE 4 + +#define N_FDC 1 +#define N_DRIVE 4 + +#define FLOPPY_MOTOR_MASK 0xf0 + +#define CROSS_64KB(a,s) (0) + +/* + * This allows people to reverse the order of + * fd0 and fd1, in case their hardware is + * strangely connected (as some RiscPCs + * and A5000s seem to be). + */ +static void driveswap(int *ints, int dummy, int dummy2) +{ + floppy_selects[0][0] ^= floppy_selects[0][1]; + floppy_selects[0][1] ^= floppy_selects[0][0]; + floppy_selects[0][0] ^= floppy_selects[0][1]; +} + +#define EXTRA_FLOPPY_PARAMS ,{ "driveswap", &driveswap, NULL, 0, 0 } + +#endif diff --git a/include/asm-arm26/fpstate.h b/include/asm-arm26/fpstate.h new file mode 100644 index 0000000..785749b --- /dev/null +++ b/include/asm-arm26/fpstate.h @@ -0,0 +1,29 @@ +/* + * linux/include/asm-arm/fpstate.h + * + * Copyright (C) 1995 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARM_FPSTATE_H +#define __ASM_ARM_FPSTATE_H + +#define FP_SIZE 35 + +struct fp_hard_struct { + unsigned int save[FP_SIZE]; /* as yet undefined */ +}; + +struct fp_soft_struct { + unsigned int save[FP_SIZE]; /* undefined information */ +}; + +union fp_state { + struct fp_hard_struct hard; + struct fp_soft_struct soft; +}; + +#endif diff --git a/include/asm-arm26/hardirq.h b/include/asm-arm26/hardirq.h new file mode 100644 index 0000000..791ee1d --- /dev/null +++ b/include/asm-arm26/hardirq.h @@ -0,0 +1,41 @@ +#ifndef __ASM_HARDIRQ_H +#define __ASM_HARDIRQ_H + +#include +#include +#include + +typedef struct { + unsigned int __softirq_pending; +} ____cacheline_aligned irq_cpustat_t; + +#include /* Standard mappings for irq_cpustat_t above */ + +#define HARDIRQ_BITS 8 + +/* + * The hardirq mask has to be large enough to have space + * for potentially all IRQ sources in the system nesting + * on a single CPU: + */ +#if (1 << HARDIRQ_BITS) < NR_IRQS +# error HARDIRQ_BITS is too low! +#endif + +#define irq_enter() (preempt_count() += HARDIRQ_OFFSET) + +#ifndef CONFIG_SMP + +extern asmlinkage void __do_softirq(void); + +#define irq_exit() \ + do { \ + preempt_count() -= IRQ_EXIT_OFFSET; \ + if (!in_interrupt() && local_softirq_pending()) \ + __do_softirq(); \ + preempt_enable_no_resched(); \ + } while (0) +#endif + + +#endif /* __ASM_HARDIRQ_H */ diff --git a/include/asm-arm26/hardware.h b/include/asm-arm26/hardware.h new file mode 100644 index 0000000..82fc55e --- /dev/null +++ b/include/asm-arm26/hardware.h @@ -0,0 +1,110 @@ +/* + * linux/include/asm-arm/arch-arc/hardware.h + * + * Copyright (C) 1996-1999 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This file contains the hardware definitions of the + * Acorn Archimedes/A5000 machines. + * + * Modifications: + * 04-04-1998 PJB/RMK Merged arc and a5k versions + */ +#ifndef __ASM_HARDWARE_H +#define __ASM_HARDWARE_H + +#include + + +/* + * What hardware must be present - these can be tested by the kernel + * source. + */ +#define HAS_IOC +#define HAS_MEMC +#define HAS_VIDC + +#define VDMA_ALIGNMENT PAGE_SIZE +#define VDMA_XFERSIZE 16 +#define VDMA_INIT 0 +#define VDMA_START 1 +#define VDMA_END 2 + +#ifndef __ASSEMBLY__ +extern void memc_write(unsigned int reg, unsigned long val); + +#define video_set_dma(start,end,offset) \ +do { \ + memc_write (VDMA_START, (start >> 2)); \ + memc_write (VDMA_END, (end - VDMA_XFERSIZE) >> 2); \ + memc_write (VDMA_INIT, (offset >> 2)); \ +} while (0) +#endif + + +/* Hardware addresses of major areas. + * *_START is the physical address + * *_SIZE is the size of the region + * *_BASE is the virtual address + */ +#define IO_START 0x03000000 +#define IO_SIZE 0x01000000 +#define IO_BASE 0x03000000 + +/* + * Screen mapping information + */ +#define SCREEN_START 0x02000000 +#define SCREEN_END 0x02078000 +#define SCREEN_SIZE 0x00078000 +#define SCREEN_BASE 0x02000000 + + +#define EXPMASK_BASE 0x03360000 +#define IOEB_BASE 0x03350000 +#define VIDC_BASE 0x03400000 +#define LATCHA_BASE 0x03250040 +#define LATCHB_BASE 0x03250018 +#define IOC_BASE 0x03200000 +#define FLOPPYDMA_BASE 0x0302a000 +#define PCIO_BASE 0x03010000 + +// FIXME - are the below correct? +#define PODSLOT_IOC0_BASE 0x03240000 +#define PODSLOT_IOC_SIZE (1 << 14) +#define PODSLOT_MEMC_BASE 0x03000000 +#define PODSLOT_MEMC_SIZE (1 << 14) + +#define vidc_writel(val) __raw_writel(val, VIDC_BASE) + +#ifndef __ASSEMBLY__ + +/* + * for use with inb/outb + */ +#define IOEB_VID_CTL (IOEB_BASE + 0x48) +#define IOEB_PRESENT (IOEB_BASE + 0x50) +#define IOEB_PSCLR (IOEB_BASE + 0x58) +#define IOEB_MONTYPE (IOEB_BASE + 0x70) + +//FIXME - These adresses are weird - ISTR some weirdo address shifting stuff was going on here... +#define IO_EC_IOC_BASE 0x80090000 +#define IO_EC_MEMC_BASE 0x80000000 + +#ifdef CONFIG_ARCH_ARC +/* A680 hardware */ +#define WD1973_BASE 0x03290000 +#define WD1973_LATCH 0x03350000 +#define Z8530_BASE 0x032b0008 +#define SCSI_BASE 0x03100000 +#endif + +#endif + +#define EXPMASK_STATUS (EXPMASK_BASE + 0x00) +#define EXPMASK_ENABLE (EXPMASK_BASE + 0x04) + +#endif diff --git a/include/asm-arm26/hdreg.h b/include/asm-arm26/hdreg.h new file mode 100644 index 0000000..7f7fd1a --- /dev/null +++ b/include/asm-arm26/hdreg.h @@ -0,0 +1 @@ +#include diff --git a/include/asm-arm26/ide.h b/include/asm-arm26/ide.h new file mode 100644 index 0000000..db804d7 --- /dev/null +++ b/include/asm-arm26/ide.h @@ -0,0 +1,34 @@ +/* + * linux/include/asm-arm/ide.h + * + * Copyright (C) 1994-1996 Linus Torvalds & authors + */ + +/* + * This file contains the i386 architecture specific IDE code. + */ + +#ifndef __ASMARM_IDE_H +#define __ASMARM_IDE_H + +#ifdef __KERNEL__ + +#ifndef MAX_HWIFS +#define MAX_HWIFS 4 +#endif + +#include +#include + +/* JMA 18.05.03 these will never be needed, but the kernel needs them to compile */ +#define __ide_mm_insw(port,addr,len) readsw(port,addr,len) +#define __ide_mm_insl(port,addr,len) readsl(port,addr,len) +#define __ide_mm_outsw(port,addr,len) writesw(port,addr,len) +#define __ide_mm_outsl(port,addr,len) writesl(port,addr,len) + +#define IDE_ARCH_OBSOLETE_INIT +#define ide_default_io_ctl(base) (0) + +#endif /* __KERNEL__ */ + +#endif /* __ASMARM_IDE_H */ diff --git a/include/asm-arm26/io.h b/include/asm-arm26/io.h new file mode 100644 index 0000000..02f94d8 --- /dev/null +++ b/include/asm-arm26/io.h @@ -0,0 +1,435 @@ +/* + * linux/include/asm-arm/io.h + * + * Copyright (C) 1996-2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Modifications: + * 16-Sep-1996 RMK Inlined the inx/outx functions & optimised for both + * constant addresses and variable addresses. + * 04-Dec-1997 RMK Moved a lot of this stuff to the new architecture + * specific IO header files. + * 27-Mar-1999 PJB Second parameter of memcpy_toio is const.. + * 04-Apr-1999 PJB Added check_signature. + * 12-Dec-1999 RMK More cleanups + * 18-Jun-2000 RMK Removed virt_to_* and friends definitions + */ +#ifndef __ASM_ARM_IO_H +#define __ASM_ARM_IO_H + +#ifdef __KERNEL__ + +#include +#include +#include +#include +#include + +/* + * Generic IO read/write. These perform native-endian accesses. Note + * that some architectures will want to re-define __raw_{read,write}w. + */ +extern void __raw_writesb(unsigned int addr, const void *data, int bytelen); +extern void __raw_writesw(unsigned int addr, const void *data, int wordlen); +extern void __raw_writesl(unsigned int addr, const void *data, int longlen); + +extern void __raw_readsb(unsigned int addr, void *data, int bytelen); +extern void __raw_readsw(unsigned int addr, void *data, int wordlen); +extern void __raw_readsl(unsigned int addr, void *data, int longlen); + +#define __raw_writeb(v,a) (*(volatile unsigned char *)(a) = (v)) +#define __raw_writew(v,a) (*(volatile unsigned short *)(a) = (v)) +#define __raw_writel(v,a) (*(volatile unsigned int *)(a) = (v)) + +#define __raw_readb(a) (*(volatile unsigned char *)(a)) +#define __raw_readw(a) (*(volatile unsigned short *)(a)) +#define __raw_readl(a) (*(volatile unsigned int *)(a)) + + +/* + * Bad read/write accesses... + */ +extern void __readwrite_bug(const char *fn); + +/* + * Now, pick up the machine-defined IO definitions + */ + +#define IO_SPACE_LIMIT 0xffffffff + +/* + * GCC is totally crap at loading/storing data. We try to persuade it + * to do the right thing by using these whereever possible instead of + * the above. + */ +#define __arch_base_getb(b,o) \ + ({ \ + unsigned int v, r = (b); \ + __asm__ __volatile__( \ + "ldrb %0, [%1, %2]" \ + : "=r" (v) \ + : "r" (r), "Ir" (o)); \ + v; \ + }) + +#define __arch_base_getl(b,o) \ + ({ \ + unsigned int v, r = (b); \ + __asm__ __volatile__( \ + "ldr %0, [%1, %2]" \ + : "=r" (v) \ + : "r" (r), "Ir" (o)); \ + v; \ + }) + +#define __arch_base_putb(v,b,o) \ + ({ \ + unsigned int r = (b); \ + __asm__ __volatile__( \ + "strb %0, [%1, %2]" \ + : \ + : "r" (v), "r" (r), "Ir" (o)); \ + }) + +#define __arch_base_putl(v,b,o) \ + ({ \ + unsigned int r = (b); \ + __asm__ __volatile__( \ + "str %0, [%1, %2]" \ + : \ + : "r" (v), "r" (r), "Ir" (o)); \ + }) + +/* + * We use two different types of addressing - PC style addresses, and ARM + * addresses. PC style accesses the PC hardware with the normal PC IO + * addresses, eg 0x3f8 for serial#1. ARM addresses are 0x80000000+ + * and are translated to the start of IO. Note that all addresses are + * shifted left! + */ +#define __PORT_PCIO(x) (!((x) & 0x80000000)) + +/* + * Dynamic IO functions - let the compiler + * optimize the expressions + */ +static inline void __outb (unsigned int value, unsigned int port) +{ + unsigned long temp; + __asm__ __volatile__( + "tst %2, #0x80000000\n\t" + "mov %0, %4\n\t" + "addeq %0, %0, %3\n\t" + "strb %1, [%0, %2, lsl #2] @ outb" + : "=&r" (temp) + : "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE) + : "cc"); +} + +static inline void __outw (unsigned int value, unsigned int port) +{ + unsigned long temp; + __asm__ __volatile__( + "tst %2, #0x80000000\n\t" + "mov %0, %4\n\t" + "addeq %0, %0, %3\n\t" + "str %1, [%0, %2, lsl #2] @ outw" + : "=&r" (temp) + : "r" (value|value<<16), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE) + : "cc"); +} + +static inline void __outl (unsigned int value, unsigned int port) +{ + unsigned long temp; + __asm__ __volatile__( + "tst %2, #0x80000000\n\t" + "mov %0, %4\n\t" + "addeq %0, %0, %3\n\t" + "str %1, [%0, %2, lsl #2] @ outl" + : "=&r" (temp) + : "r" (value), "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE) + : "cc"); +} + +#define DECLARE_DYN_IN(sz,fnsuffix,instr) \ +static inline unsigned sz __in##fnsuffix (unsigned int port) \ +{ \ + unsigned long temp, value; \ + __asm__ __volatile__( \ + "tst %2, #0x80000000\n\t" \ + "mov %0, %4\n\t" \ + "addeq %0, %0, %3\n\t" \ + "ldr" instr " %1, [%0, %2, lsl #2] @ in" #fnsuffix \ + : "=&r" (temp), "=r" (value) \ + : "r" (port), "Ir" (PCIO_BASE - IO_BASE), "Ir" (IO_BASE) \ + : "cc"); \ + return (unsigned sz)value; \ +} + +static inline unsigned int __ioaddr (unsigned int port) \ +{ \ + if (__PORT_PCIO(port)) \ + return (unsigned int)(PCIO_BASE + (port << 2)); \ + else \ + return (unsigned int)(IO_BASE + (port << 2)); \ +} + +#define DECLARE_IO(sz,fnsuffix,instr) \ + DECLARE_DYN_IN(sz,fnsuffix,instr) + +DECLARE_IO(char,b,"b") +DECLARE_IO(short,w,"") +DECLARE_IO(int,l,"") + +#undef DECLARE_IO +#undef DECLARE_DYN_IN + +/* + * Constant address IO functions + * + * These have to be macros for the 'J' constraint to work - + * +/-4096 immediate operand. + */ +#define __outbc(value,port) \ +({ \ + if (__PORT_PCIO((port))) \ + __asm__ __volatile__( \ + "strb %0, [%1, %2] @ outbc" \ + : : "r" (value), "r" (PCIO_BASE), "Jr" ((port) << 2)); \ + else \ + __asm__ __volatile__( \ + "strb %0, [%1, %2] @ outbc" \ + : : "r" (value), "r" (IO_BASE), "r" ((port) << 2)); \ +}) + +#define __inbc(port) \ +({ \ + unsigned char result; \ + if (__PORT_PCIO((port))) \ + __asm__ __volatile__( \ + "ldrb %0, [%1, %2] @ inbc" \ + : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2)); \ + else \ + __asm__ __volatile__( \ + "ldrb %0, [%1, %2] @ inbc" \ + : "=r" (result) : "r" (IO_BASE), "r" ((port) << 2)); \ + result; \ +}) + +#define __outwc(value,port) \ +({ \ + unsigned long v = value; \ + if (__PORT_PCIO((port))) \ + __asm__ __volatile__( \ + "str %0, [%1, %2] @ outwc" \ + : : "r" (v|v<<16), "r" (PCIO_BASE), "Jr" ((port) << 2)); \ + else \ + __asm__ __volatile__( \ + "str %0, [%1, %2] @ outwc" \ + : : "r" (v|v<<16), "r" (IO_BASE), "r" ((port) << 2)); \ +}) + +#define __inwc(port) \ +({ \ + unsigned short result; \ + if (__PORT_PCIO((port))) \ + __asm__ __volatile__( \ + "ldr %0, [%1, %2] @ inwc" \ + : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2)); \ + else \ + __asm__ __volatile__( \ + "ldr %0, [%1, %2] @ inwc" \ + : "=r" (result) : "r" (IO_BASE), "r" ((port) << 2)); \ + result & 0xffff; \ +}) + +#define __outlc(value,port) \ +({ \ + unsigned long v = value; \ + if (__PORT_PCIO((port))) \ + __asm__ __volatile__( \ + "str %0, [%1, %2] @ outlc" \ + : : "r" (v), "r" (PCIO_BASE), "Jr" ((port) << 2)); \ + else \ + __asm__ __volatile__( \ + "str %0, [%1, %2] @ outlc" \ + : : "r" (v), "r" (IO_BASE), "r" ((port) << 2)); \ +}) + +#define __inlc(port) \ +({ \ + unsigned long result; \ + if (__PORT_PCIO((port))) \ + __asm__ __volatile__( \ + "ldr %0, [%1, %2] @ inlc" \ + : "=r" (result) : "r" (PCIO_BASE), "Jr" ((port) << 2)); \ + else \ + __asm__ __volatile__( \ + "ldr %0, [%1, %2] @ inlc" \ + : "=r" (result) : "r" (IO_BASE), "r" ((port) << 2)); \ + result; \ +}) + +#define __ioaddrc(port) \ +({ \ + unsigned long addr; \ + if (__PORT_PCIO((port))) \ + addr = PCIO_BASE + ((port) << 2); \ + else \ + addr = IO_BASE + ((port) << 2); \ + addr; \ +}) + +#define inb(p) (__builtin_constant_p((p)) ? __inbc(p) : __inb(p)) +#define inw(p) (__builtin_constant_p((p)) ? __inwc(p) : __inw(p)) +#define inl(p) (__builtin_constant_p((p)) ? __inlc(p) : __inl(p)) +#define outb(v,p) (__builtin_constant_p((p)) ? __outbc(v,p) : __outb(v,p)) +#define outw(v,p) (__builtin_constant_p((p)) ? __outwc(v,p) : __outw(v,p)) +#define outl(v,p) (__builtin_constant_p((p)) ? __outlc(v,p) : __outl(v,p)) +#define __ioaddr(p) (__builtin_constant_p((p)) ? __ioaddr(p) : __ioaddrc(p)) + +/* JMA 18.02.03 added sb,sl from arm/io.h, changing io to ioaddr */ + +#define outsb(p,d,l) __raw_writesb(__ioaddr(p),d,l) +#define outsw(p,d,l) __raw_writesw(__ioaddr(p),d,l) +#define outsl(p,d,l) __raw_writesl(__ioaddr(p),d,l) + +#define insb(p,d,l) __raw_readsb(__ioaddr(p),d,l) +#define insw(p,d,l) __raw_readsw(__ioaddr(p),d,l) +#define insl(p,d,l) __raw_readsl(__ioaddr(p),d,l) + +#define insw(p,d,l) __raw_readsw(__ioaddr(p),d,l) +#define outsw(p,d,l) __raw_writesw(__ioaddr(p),d,l) + +#define readb(c) (__readwrite_bug("readb"),0) +#define readw(c) (__readwrite_bug("readw"),0) +#define readl(c) (__readwrite_bug("readl"),0) +#define readb_relaxed(addr) readb(addr) +#define readw_relaxed(addr) readw(addr) +#define readl_relaxed(addr) readl(addr) +#define writeb(v,c) __readwrite_bug("writeb") +#define writew(v,c) __readwrite_bug("writew") +#define writel(v,c) __readwrite_bug("writel") + +#define readsw(p,d,l) (__readwrite_bug("readsw"),0) +#define readsl(p,d,l) (__readwrite_bug("readsl"),0) +#define writesw(p,d,l) __readwrite_bug("writesw") +#define writesl(p,d,l) __readwrite_bug("writesl") + +#define mmiowb() + +/* the following macro is depreciated */ +#define ioaddr(port) __ioaddr((port)) + +/* + * No ioremap support here. + */ +#define __arch_ioremap(c,s,f,a) ((void *)(c)) +#define __arch_iounmap(c) do { } while (0) + + +#if defined(__arch_putb) || defined(__arch_putw) || defined(__arch_putl) || \ + defined(__arch_getb) || defined(__arch_getw) || defined(__arch_getl) +#warning machine class uses old __arch_putw or __arch_getw +#endif + +/* + * IO port access primitives + * ------------------------- + * + * The ARM doesn't have special IO access instructions; all IO is memory + * mapped. Note that these are defined to perform little endian accesses + * only. Their primary purpose is to access PCI and ISA peripherals. + * + * Note that for a big endian machine, this implies that the following + * big endian mode connectivity is in place, as described by numerious + * ARM documents: + * + * PCI: D0-D7 D8-D15 D16-D23 D24-D31 + * ARM: D24-D31 D16-D23 D8-D15 D0-D7 + * + * The machine specific io.h include defines __io to translate an "IO" + * address to a memory address. + * + * Note that we prevent GCC re-ordering or caching values in expressions + * by introducing sequence points into the in*() definitions. Note that + * __raw_* do not guarantee this behaviour. + */ +/* +#define outsb(p,d,l) __raw_writesb(__io(p),d,l) +#define outsw(p,d,l) __raw_writesw(__io(p),d,l) + +#define insb(p,d,l) __raw_readsb(__io(p),d,l) +#define insw(p,d,l) __raw_readsw(__io(p),d,l) +*/ +#define outb_p(val,port) outb((val),(port)) +#define outw_p(val,port) outw((val),(port)) +#define inb_p(port) inb((port)) +#define inw_p(port) inw((port)) +#define inl_p(port) inl((port)) + +#define outsb_p(port,from,len) outsb(port,from,len) +#define outsw_p(port,from,len) outsw(port,from,len) +#define insb_p(port,to,len) insb(port,to,len) +#define insw_p(port,to,len) insw(port,to,len) + +/* + * String version of IO memory access ops: + */ +extern void _memcpy_fromio(void *, unsigned long, size_t); +extern void _memcpy_toio(unsigned long, const void *, size_t); +extern void _memset_io(unsigned long, int, size_t); + +/* + * ioremap and friends. + * + * ioremap takes a PCI memory address, as specified in + * Documentation/IO-mapping.txt. + */ +extern void * __ioremap(unsigned long, size_t, unsigned long, unsigned long); +extern void __iounmap(void *addr); + +#ifndef __arch_ioremap +#define ioremap(cookie,size) __ioremap(cookie,size,0,1) +#define ioremap_nocache(cookie,size) __ioremap(cookie,size,0,1) +#define iounmap(cookie) __iounmap(cookie) +#else +#define ioremap(cookie,size) __arch_ioremap((cookie),(size),0,1) +#define ioremap_nocache(cookie,size) __arch_ioremap((cookie),(size),0,1) +#define iounmap(cookie) __arch_iounmap(cookie) +#endif + +/* + * DMA-consistent mapping functions. These allocate/free a region of + * uncached, unwrite-buffered mapped memory space for use with DMA + * devices. This is the "generic" version. The PCI specific version + * is in pci.h + */ +extern void *consistent_alloc(int gfp, size_t size, dma_addr_t *handle); +extern void consistent_free(void *vaddr, size_t size, dma_addr_t handle); +extern void consistent_sync(void *vaddr, size_t size, int rw); + +/* + * can the hardware map this into one segment or not, given no other + * constraints. + */ +#define BIOVEC_MERGEABLE(vec1, vec2) \ + ((bvec_to_phys((vec1)) + (vec1)->bv_len) == bvec_to_phys((vec2))) + +/* + * Convert a physical pointer to a virtual kernel pointer for /dev/mem + * access + */ +#define xlate_dev_mem_ptr(p) __va(p) + +/* + * Convert a virtual cached pointer to an uncached pointer + */ +#define xlate_dev_kmem_ptr(p) p + +#endif /* __KERNEL__ */ +#endif /* __ASM_ARM_IO_H */ diff --git a/include/asm-arm26/ioc.h b/include/asm-arm26/ioc.h new file mode 100644 index 0000000..b3b46ef --- /dev/null +++ b/include/asm-arm26/ioc.h @@ -0,0 +1,72 @@ +/* + * linux/include/asm-arm/hardware/ioc.h + * + * Copyright (C) Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Use these macros to read/write the IOC. All it does is perform the actual + * read/write. + */ +#ifndef __ASMARM_HARDWARE_IOC_H +#define __ASMARM_HARDWARE_IOC_H + +#ifndef __ASSEMBLY__ + +/* + * We use __raw_base variants here so that we give the compiler the + * chance to keep IOC_BASE in a register. + */ +#define ioc_readb(off) __raw_readb(IOC_BASE + (off)) +#define ioc_writeb(val,off) __raw_writeb(val, IOC_BASE + (off)) + +#endif + +#define IOC_CONTROL (0x00) +#define IOC_KARTTX (0x04) +#define IOC_KARTRX (0x04) + +#define IOC_IRQSTATA (0x10) +#define IOC_IRQREQA (0x14) +#define IOC_IRQCLRA (0x14) +#define IOC_IRQMASKA (0x18) + +#define IOC_IRQSTATB (0x20) +#define IOC_IRQREQB (0x24) +#define IOC_IRQMASKB (0x28) + +#define IOC_FIQSTAT (0x30) +#define IOC_FIQREQ (0x34) +#define IOC_FIQMASK (0x38) + +#define IOC_T0CNTL (0x40) +#define IOC_T0LTCHL (0x40) +#define IOC_T0CNTH (0x44) +#define IOC_T0LTCHH (0x44) +#define IOC_T0GO (0x48) +#define IOC_T0LATCH (0x4c) + +#define IOC_T1CNTL (0x50) +#define IOC_T1LTCHL (0x50) +#define IOC_T1CNTH (0x54) +#define IOC_T1LTCHH (0x54) +#define IOC_T1GO (0x58) +#define IOC_T1LATCH (0x5c) + +#define IOC_T2CNTL (0x60) +#define IOC_T2LTCHL (0x60) +#define IOC_T2CNTH (0x64) +#define IOC_T2LTCHH (0x64) +#define IOC_T2GO (0x68) +#define IOC_T2LATCH (0x6c) + +#define IOC_T3CNTL (0x70) +#define IOC_T3LTCHL (0x70) +#define IOC_T3CNTH (0x74) +#define IOC_T3LTCHH (0x74) +#define IOC_T3GO (0x78) +#define IOC_T3LATCH (0x7c) + +#endif diff --git a/include/asm-arm26/ioctl.h b/include/asm-arm26/ioctl.h new file mode 100644 index 0000000..2cbb7d0 --- /dev/null +++ b/include/asm-arm26/ioctl.h @@ -0,0 +1,74 @@ +/* + * linux/ioctl.h for Linux by H.H. Bergman. + */ + +#ifndef _ASMARM_IOCTL_H +#define _ASMARM_IOCTL_H + +/* ioctl command encoding: 32 bits total, command in lower 16 bits, + * size of the parameter structure in the lower 14 bits of the + * upper 16 bits. + * Encoding the size of the parameter structure in the ioctl request + * is useful for catching programs compiled with old versions + * and to avoid overwriting user space outside the user buffer area. + * The highest 2 bits are reserved for indicating the ``access mode''. + * NOTE: This limits the max parameter size to 16kB -1 ! + */ + +/* + * The following is for compatibility across the various Linux + * platforms. The i386 ioctl numbering scheme doesn't really enforce + * a type field. De facto, however, the top 8 bits of the lower 16 + * bits are indeed used as a type field, so we might just as well make + * this explicit here. Please be sure to use the decoding macros + * below from now on. + */ +#define _IOC_NRBITS 8 +#define _IOC_TYPEBITS 8 +#define _IOC_SIZEBITS 14 +#define _IOC_DIRBITS 2 + +#define _IOC_NRMASK ((1 << _IOC_NRBITS)-1) +#define _IOC_TYPEMASK ((1 << _IOC_TYPEBITS)-1) +#define _IOC_SIZEMASK ((1 << _IOC_SIZEBITS)-1) +#define _IOC_DIRMASK ((1 << _IOC_DIRBITS)-1) + +#define _IOC_NRSHIFT 0 +#define _IOC_TYPESHIFT (_IOC_NRSHIFT+_IOC_NRBITS) +#define _IOC_SIZESHIFT (_IOC_TYPESHIFT+_IOC_TYPEBITS) +#define _IOC_DIRSHIFT (_IOC_SIZESHIFT+_IOC_SIZEBITS) + +/* + * Direction bits. + */ +#define _IOC_NONE 0U +#define _IOC_WRITE 1U +#define _IOC_READ 2U + +#define _IOC(dir,type,nr,size) \ + (((dir) << _IOC_DIRSHIFT) | \ + ((type) << _IOC_TYPESHIFT) | \ + ((nr) << _IOC_NRSHIFT) | \ + ((size) << _IOC_SIZESHIFT)) + +/* used to create numbers */ +#define _IO(type,nr) _IOC(_IOC_NONE,(type),(nr),0) +#define _IOR(type,nr,size) _IOC(_IOC_READ,(type),(nr),sizeof(size)) +#define _IOW(type,nr,size) _IOC(_IOC_WRITE,(type),(nr),sizeof(size)) +#define _IOWR(type,nr,size) _IOC(_IOC_READ|_IOC_WRITE,(type),(nr),sizeof(size)) + +/* used to decode ioctl numbers.. */ +#define _IOC_DIR(nr) (((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK) +#define _IOC_TYPE(nr) (((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK) +#define _IOC_NR(nr) (((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK) +#define _IOC_SIZE(nr) (((nr) >> _IOC_SIZESHIFT) & _IOC_SIZEMASK) + +/* ...and for the drivers/sound files... */ + +#define IOC_IN (_IOC_WRITE << _IOC_DIRSHIFT) +#define IOC_OUT (_IOC_READ << _IOC_DIRSHIFT) +#define IOC_INOUT ((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT) +#define IOCSIZE_MASK (_IOC_SIZEMASK << _IOC_SIZESHIFT) +#define IOCSIZE_SHIFT (_IOC_SIZESHIFT) + +#endif /* _ASMARM_IOCTL_H */ diff --git a/include/asm-arm26/ioctls.h b/include/asm-arm26/ioctls.h new file mode 100644 index 0000000..ba9c7d8 --- /dev/null +++ b/include/asm-arm26/ioctls.h @@ -0,0 +1,81 @@ +#ifndef __ASM_ARM_IOCTLS_H +#define __ASM_ARM_IOCTLS_H + +#include + +/* 0x54 is just a magic number to make these relatively unique ('T') */ + +#define TCGETS 0x5401 +#define TCSETS 0x5402 +#define TCSETSW 0x5403 +#define TCSETSF 0x5404 +#define TCGETA 0x5405 +#define TCSETA 0x5406 +#define TCSETAW 0x5407 +#define TCSETAF 0x5408 +#define TCSBRK 0x5409 +#define TCXONC 0x540A +#define TCFLSH 0x540B +#define TIOCEXCL 0x540C +#define TIOCNXCL 0x540D +#define TIOCSCTTY 0x540E +#define TIOCGPGRP 0x540F +#define TIOCSPGRP 0x5410 +#define TIOCOUTQ 0x5411 +#define TIOCSTI 0x5412 +#define TIOCGWINSZ 0x5413 +#define TIOCSWINSZ 0x5414 +#define TIOCMGET 0x5415 +#define TIOCMBIS 0x5416 +#define TIOCMBIC 0x5417 +#define TIOCMSET 0x5418 +#define TIOCGSOFTCAR 0x5419 +#define TIOCSSOFTCAR 0x541A +#define FIONREAD 0x541B +#define TIOCINQ FIONREAD +#define TIOCLINUX 0x541C +#define TIOCCONS 0x541D +#define TIOCGSERIAL 0x541E +#define TIOCSSERIAL 0x541F +#define TIOCPKT 0x5420 +#define FIONBIO 0x5421 +#define TIOCNOTTY 0x5422 +#define TIOCSETD 0x5423 +#define TIOCGETD 0x5424 +#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */ +#define TIOCTTYGSTRUCT 0x5426 /* For debugging only */ +#define TIOCSBRK 0x5427 /* BSD compatibility */ +#define TIOCCBRK 0x5428 /* BSD compatibility */ +#define TIOCGSID 0x5429 /* Return the session ID of FD */ +#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ +#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ + +#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */ +#define FIOCLEX 0x5451 +#define FIOASYNC 0x5452 +#define TIOCSERCONFIG 0x5453 +#define TIOCSERGWILD 0x5454 +#define TIOCSERSWILD 0x5455 +#define TIOCGLCKTRMIOS 0x5456 +#define TIOCSLCKTRMIOS 0x5457 +#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ +#define TIOCSERGETLSR 0x5459 /* Get line status register */ +#define TIOCSERGETMULTI 0x545A /* Get multiport config */ +#define TIOCSERSETMULTI 0x545B /* Set multiport config */ + +#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ +#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ +#define FIOQSIZE 0x545E + +/* Used for packet mode */ +#define TIOCPKT_DATA 0 +#define TIOCPKT_FLUSHREAD 1 +#define TIOCPKT_FLUSHWRITE 2 +#define TIOCPKT_STOP 4 +#define TIOCPKT_START 8 +#define TIOCPKT_NOSTOP 16 +#define TIOCPKT_DOSTOP 32 + +#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ + +#endif diff --git a/include/asm-arm26/ipc.h b/include/asm-arm26/ipc.h new file mode 100644 index 0000000..a46e3d9 --- /dev/null +++ b/include/asm-arm26/ipc.h @@ -0,0 +1 @@ +#include diff --git a/include/asm-arm26/ipcbuf.h b/include/asm-arm26/ipcbuf.h new file mode 100644 index 0000000..9768397 --- /dev/null +++ b/include/asm-arm26/ipcbuf.h @@ -0,0 +1,29 @@ +#ifndef __ASMARM_IPCBUF_H +#define __ASMARM_IPCBUF_H + +/* + * The ipc64_perm structure for arm architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 32-bit mode_t and seq + * - 2 miscellaneous 32-bit values + */ + +struct ipc64_perm +{ + __kernel_key_t key; + __kernel_uid32_t uid; + __kernel_gid32_t gid; + __kernel_uid32_t cuid; + __kernel_gid32_t cgid; + __kernel_mode_t mode; + unsigned short __pad1; + unsigned short seq; + unsigned short __pad2; + unsigned long __unused1; + unsigned long __unused2; +}; + +#endif /* __ASMARM_IPCBUF_H */ diff --git a/include/asm-arm26/irq.h b/include/asm-arm26/irq.h new file mode 100644 index 0000000..06bd5a5 --- /dev/null +++ b/include/asm-arm26/irq.h @@ -0,0 +1,52 @@ +#ifndef __ASM_ARM_IRQ_H +#define __ASM_ARM_IRQ_H + +#include + +#ifndef NR_IRQS +#define NR_IRQS 128 +#endif + + +/* JMA 18.05.02 Copied off arch/arm/irq.h */ +#ifndef irq_canonicalize +#define irq_canonicalize(i) (i) +#endif + + +/* + * Use this value to indicate lack of interrupt + * capability + */ +#ifndef NO_IRQ +#define NO_IRQ ((unsigned int)(-1)) +#endif + +struct irqaction; + +#define disable_irq_nosync(i) disable_irq(i) + +extern void disable_irq(unsigned int); +extern void enable_irq(unsigned int); + +#define __IRQT_FALEDGE (1 << 0) +#define __IRQT_RISEDGE (1 << 1) +#define __IRQT_LOWLVL (1 << 2) +#define __IRQT_HIGHLVL (1 << 3) + +#define IRQT_NOEDGE (0) +#define IRQT_RISING (__IRQT_RISEDGE) +#define IRQT_FALLING (__IRQT_FALEDGE) +#define IRQT_BOTHEDGE (__IRQT_RISEDGE|__IRQT_FALEDGE) +#define IRQT_LOW (__IRQT_LOWLVL) +#define IRQT_HIGH (__IRQT_HIGHLVL) +#define IRQT_PROBE (1 << 4) + +int set_irq_type(unsigned int irq, unsigned int type); + +int setup_irq(unsigned int, struct irqaction *); +struct pt_regs; +int handle_IRQ_event(unsigned int, struct pt_regs *, struct irqaction *); + +#endif + diff --git a/include/asm-arm26/irqchip.h b/include/asm-arm26/irqchip.h new file mode 100644 index 0000000..6a007a9 --- /dev/null +++ b/include/asm-arm26/irqchip.h @@ -0,0 +1,101 @@ +/* + * linux/include/asm-arm/mach/irq.h + * + * Copyright (C) 1995-2000 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_ARM_MACH_IRQ_H +#define __ASM_ARM_MACH_IRQ_H + +struct irqdesc; +struct pt_regs; +struct seq_file; + +typedef void (*irq_handler_t)(unsigned int, struct irqdesc *, struct pt_regs *); +typedef void (*irq_control_t)(unsigned int); + +struct irqchip { + /* + * Acknowledge the IRQ. + * If this is a level-based IRQ, then it is expected to mask the IRQ + * as well. + */ + void (*ack)(unsigned int); + /* + * Mask the IRQ in hardware. + */ + void (*mask)(unsigned int); + /* + * Unmask the IRQ in hardware. + */ + void (*unmask)(unsigned int); + /* + * Re-run the IRQ + */ + void (*rerun)(unsigned int); + /* + * Set the type of the IRQ. + */ + int (*type)(unsigned int, unsigned int); +}; + +struct irqdesc { + irq_handler_t handle; + struct irqchip *chip; + struct irqaction *action; + + unsigned int enabled : 1; /* IRQ is currently enabled */ + unsigned int triggered: 1; /* IRQ has occurred */ + unsigned int running : 1; /* IRQ is running */ + unsigned int pending : 1; /* IRQ is pending */ + unsigned int probing : 1; /* IRQ in use for a probe */ + unsigned int probe_ok : 1; /* IRQ can be used for probe */ + unsigned int valid : 1; /* IRQ claimable */ + unsigned int noautoenable : 1; /* don't automatically enable IRQ */ + unsigned int unused :23; + unsigned int depth; /* disable depth */ + + /* + * IRQ lock detection + */ + unsigned int lck_cnt; + unsigned int lck_pc; + unsigned int lck_jif; +}; + +extern struct irqdesc irq_desc[]; + +/* + * This is internal. Do not use it. + */ +extern void (*init_arch_irq)(void); +extern void init_FIQ(void); +extern int show_fiq_list(struct seq_file *, void *); +void __set_irq_handler(unsigned int irq, irq_handler_t, int); + +/* + * External stuff. + */ +#define set_irq_handler(irq,handler) __set_irq_handler(irq,handler,0) +#define set_irq_chained_handler(irq,handler) __set_irq_handler(irq,handler,1) + +void set_irq_chip(unsigned int irq, struct irqchip *); +void set_irq_flags(unsigned int irq, unsigned int flags); + +#define IRQF_VALID (1 << 0) +#define IRQF_PROBE (1 << 1) +#define IRQF_NOAUTOEN (1 << 2) + +/* + * Built-in IRQ handlers. + */ +void do_level_IRQ(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs); +void do_edge_IRQ(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs); +void do_simple_IRQ(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs); +void do_bad_IRQ(unsigned int irq, struct irqdesc *desc, struct pt_regs *regs); +void dummy_mask_unmask_irq(unsigned int irq); + +#endif diff --git a/include/asm-arm26/kmap_types.h b/include/asm-arm26/kmap_types.h new file mode 100644 index 0000000..d5da712 --- /dev/null +++ b/include/asm-arm26/kmap_types.h @@ -0,0 +1,12 @@ +#ifndef __ARM_KMAP_TYPES_H +#define __ARM_KMAP_TYPES_H + +/* + * This is the "bare minimum". AIO seems to require this. + */ +enum km_type { + KM_IRQ0, + KM_USER1 +}; + +#endif diff --git a/include/asm-arm26/leds.h b/include/asm-arm26/leds.h new file mode 100644 index 0000000..88ce412 --- /dev/null +++ b/include/asm-arm26/leds.h @@ -0,0 +1,51 @@ +/* + * linux/include/asm-arm/leds.h + * + * Copyright (C) 1998 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Event-driven interface for LEDs on machines + * Added led_start and led_stop- Alex Holden, 28th Dec 1998. + */ +#ifndef ASM_ARM_LEDS_H +#define ASM_ARM_LEDS_H + +#include + +typedef enum { + led_idle_start, + led_idle_end, + led_timer, + led_start, + led_stop, + led_claim, /* override idle & timer leds */ + led_release, /* restore idle & timer leds */ + led_start_timer_mode, + led_stop_timer_mode, + led_green_on, + led_green_off, + led_amber_on, + led_amber_off, + led_red_on, + led_red_off, + led_blue_on, + led_blue_off, + /* + * I want this between led_timer and led_start, but + * someone has decided to export this to user space + */ + led_halted +} led_event_t; + +/* Use this routine to handle LEDs */ + +#ifdef CONFIG_LEDS +extern void (*leds_event)(led_event_t); +#else +#define leds_event(e) +#endif + +#endif diff --git a/include/asm-arm26/limits.h b/include/asm-arm26/limits.h new file mode 100644 index 0000000..08d8c66 --- /dev/null +++ b/include/asm-arm26/limits.h @@ -0,0 +1,11 @@ +#ifndef __ASM_PIPE_H +#define __ASM_PIPE_H + +#ifndef PAGE_SIZE +#include +#endif + +#define PIPE_BUF PAGE_SIZE + +#endif + diff --git a/include/asm-arm26/linkage.h b/include/asm-arm26/linkage.h new file mode 100644 index 0000000..dbe4b4e --- /dev/null +++ b/include/asm-arm26/linkage.h @@ -0,0 +1,7 @@ +#ifndef __ASM_LINKAGE_H +#define __ASM_LINKAGE_H + +#define __ALIGN .align 0 +#define __ALIGN_STR ".align 0" + +#endif diff --git a/include/asm-arm26/local.h b/include/asm-arm26/local.h new file mode 100644 index 0000000..6759e91 --- /dev/null +++ b/include/asm-arm26/local.h @@ -0,0 +1,2 @@ +//FIXME - nicked from arm32 - check it is correct... +#include diff --git a/include/asm-arm26/locks.h b/include/asm-arm26/locks.h new file mode 100644 index 0000000..81b3bda --- /dev/null +++ b/include/asm-arm26/locks.h @@ -0,0 +1,161 @@ +/* + * linux/include/asm-arm/proc-armo/locks.h + * + * Copyright (C) 2000 Russell King + * Fixes for 26 bit machines, (C) 2000 Dave Gilbert + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Interrupt safe locking assembler. + */ +#ifndef __ASM_PROC_LOCKS_H +#define __ASM_PROC_LOCKS_H + +/* Decrements by 1, fails if value < 0 */ +#define __down_op(ptr,fail) \ + ({ \ + __asm__ __volatile__ ( \ + "@ atomic down operation\n" \ +" mov ip, pc\n" \ +" orr lr, ip, #0x08000000\n" \ +" teqp lr, #0\n" \ +" ldr lr, [%0]\n" \ +" and ip, ip, #0x0c000003\n" \ +" subs lr, lr, #1\n" \ +" str lr, [%0]\n" \ +" orrmi ip, ip, #0x80000000 @ set N\n" \ +" teqp ip, #0\n" \ +" movmi ip, %0\n" \ +" blmi " #fail \ + : \ + : "r" (ptr) \ + : "ip", "lr", "cc"); \ + }) + +#define __down_op_ret(ptr,fail) \ + ({ \ + unsigned int result; \ + __asm__ __volatile__ ( \ +" @ down_op_ret\n" \ +" mov ip, pc\n" \ +" orr lr, ip, #0x08000000\n" \ +" teqp lr, #0\n" \ +" ldr lr, [%1]\n" \ +" and ip, ip, #0x0c000003\n" \ +" subs lr, lr, #1\n" \ +" str lr, [%1]\n" \ +" orrmi ip, ip, #0x80000000 @ set N\n" \ +" teqp ip, #0\n" \ +" movmi ip, %1\n" \ +" movpl ip, #0\n" \ +" blmi " #fail "\n" \ +" mov %0, ip" \ + : "=&r" (result) \ + : "r" (ptr) \ + : "ip", "lr", "cc"); \ + result; \ + }) + +#define __up_op(ptr,wake) \ + ({ \ + __asm__ __volatile__ ( \ + "@ up_op\n" \ +" mov ip, pc\n" \ +" orr lr, ip, #0x08000000\n" \ +" teqp lr, #0\n" \ +" ldr lr, [%0]\n" \ +" and ip, ip, #0x0c000003\n" \ +" adds lr, lr, #1\n" \ +" str lr, [%0]\n" \ +" orrle ip, ip, #0x80000000 @ set N - should this be mi ??? DAG ! \n" \ +" teqp ip, #0\n" \ +" movmi ip, %0\n" \ +" blmi " #wake \ + : \ + : "r" (ptr) \ + : "ip", "lr", "cc"); \ + }) + +/* + * The value 0x01000000 supports up to 128 processors and + * lots of processes. BIAS must be chosen such that sub'ing + * BIAS once per CPU will result in the long remaining + * negative. + */ +#define RW_LOCK_BIAS 0x01000000 +#define RW_LOCK_BIAS_STR "0x01000000" + +/* Decrements by RW_LOCK_BIAS rather than 1, fails if value != 0 */ +#define __down_op_write(ptr,fail) \ + ({ \ + __asm__ __volatile__( \ + "@ down_op_write\n" \ +" mov ip, pc\n" \ +" orr lr, ip, #0x08000000\n" \ +" teqp lr, #0\n" \ +" and ip, ip, #0x0c000003\n" \ +\ +" ldr lr, [%0]\n" \ +" subs lr, lr, %1\n" \ +" str lr, [%0]\n" \ +\ +" orreq ip, ip, #0x40000000 @ set Z \n"\ +" teqp ip, #0\n" \ +" movne ip, %0\n" \ +" blne " #fail \ + : \ + : "r" (ptr), "I" (RW_LOCK_BIAS) \ + : "ip", "lr", "cc"); \ + }) + +/* Increments by RW_LOCK_BIAS, wakes if value >= 0 */ +#define __up_op_write(ptr,wake) \ + ({ \ + __asm__ __volatile__( \ + "@ up_op_read\n" \ +" mov ip, pc\n" \ +" orr lr, ip, #0x08000000\n" \ +" teqp lr, #0\n" \ +\ +" ldr lr, [%0]\n" \ +" and ip, ip, #0x0c000003\n" \ +" adds lr, lr, %1\n" \ +" str lr, [%0]\n" \ +\ +" orrcs ip, ip, #0x20000000 @ set C\n" \ +" teqp ip, #0\n" \ +" movcs ip, %0\n" \ +" blcs " #wake \ + : \ + : "r" (ptr), "I" (RW_LOCK_BIAS) \ + : "ip", "lr", "cc"); \ + }) + +#define __down_op_read(ptr,fail) \ + __down_op(ptr, fail) + +#define __up_op_read(ptr,wake) \ + ({ \ + __asm__ __volatile__( \ + "@ up_op_read\n" \ +" mov ip, pc\n" \ +" orr lr, ip, #0x08000000\n" \ +" teqp lr, #0\n" \ +\ +" ldr lr, [%0]\n" \ +" and ip, ip, #0x0c000003\n" \ +" adds lr, lr, %1\n" \ +" str lr, [%0]\n" \ +\ +" orreq ip, ip, #0x40000000 @ Set Z \n" \ +" teqp ip, #0\n" \ +" moveq ip, %0\n" \ +" bleq " #wake \ + : \ + : "r" (ptr), "I" (1) \ + : "ip", "lr", "cc"); \ + }) + +#endif diff --git a/include/asm-arm26/mach-types.h b/include/asm-arm26/mach-types.h new file mode 100644 index 0000000..b34045b --- /dev/null +++ b/include/asm-arm26/mach-types.h @@ -0,0 +1,37 @@ +/* + * Unlike ARM32 this is NOT automatically generated. DONT delete it + * Instead, consider FIXME-ing it so its auto-detected. + */ + +#ifndef __ASM_ARM_MACH_TYPE_H +#define __ASM_ARM_MACH_TYPE_H + +#include + +#ifndef __ASSEMBLY__ +extern unsigned int __machine_arch_type; +#endif + +#define MACH_TYPE_ARCHIMEDES 10 +#define MACH_TYPE_A5K 11 + +#ifdef CONFIG_ARCH_ARC +# define machine_arch_type MACH_TYPE_ARCHIMEDES +# define machine_is_archimedes() (machine_arch_type == MACH_TYPE_ARCHIMEDES) +#else +# define machine_is_archimedes() (0) +#endif + +#ifdef CONFIG_ARCH_A5K +# define machine_arch_type MACH_TYPE_A5K +# define machine_is_a5k() (machine_arch_type == MACH_TYPE_A5K) +#else +# define machine_is_a5k() (0) +#endif + +#ifndef machine_arch_type +#error Unknown machine type +#define machine_arch_type __machine_arch_type +#endif + +#endif diff --git a/include/asm-arm26/map.h b/include/asm-arm26/map.h new file mode 100644 index 0000000..6e12a7f --- /dev/null +++ b/include/asm-arm26/map.h @@ -0,0 +1,24 @@ +/* + * linux/include/asm-arm/map.h + * + * Copyright (C) 1999-2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Page table mapping constructs and function prototypes + */ +struct map_desc { + unsigned long virtual; + unsigned long physical; + unsigned long length; + unsigned int type; +}; + +struct meminfo; + +extern void create_memmap_holes(struct meminfo *); +extern void memtable_init(struct meminfo *); +extern void iotable_init(struct map_desc *); +extern void setup_io_desc(void); diff --git a/include/asm-arm26/mc146818rtc.h b/include/asm-arm26/mc146818rtc.h new file mode 100644 index 0000000..a234130 --- /dev/null +++ b/include/asm-arm26/mc146818rtc.h @@ -0,0 +1,28 @@ +/* + * Machine dependent access functions for RTC registers. + */ +#ifndef _ASM_MC146818RTC_H +#define _ASM_MC146818RTC_H + +#include +#include + +#ifndef RTC_PORT +#define RTC_PORT(x) (0x70 + (x)) +#define RTC_ALWAYS_BCD 1 /* RTC operates in binary mode */ +#endif + +/* + * The yet supported machines all access the RTC index register via + * an ISA port access but the way to access the date register differs ... + */ +#define CMOS_READ(addr) ({ \ +outb_p((addr),RTC_PORT(0)); \ +inb_p(RTC_PORT(1)); \ +}) +#define CMOS_WRITE(val, addr) ({ \ +outb_p((addr),RTC_PORT(0)); \ +outb_p((val),RTC_PORT(1)); \ +}) + +#endif /* _ASM_MC146818RTC_H */ diff --git a/include/asm-arm26/memory.h b/include/asm-arm26/memory.h new file mode 100644 index 0000000..20d7861 --- /dev/null +++ b/include/asm-arm26/memory.h @@ -0,0 +1,101 @@ +/* + * linux/include/asm-arm26/memory.h + * + * Copyright (C) 2000-2002 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Note: this file should not be included by non-asm/.h files + */ +#ifndef __ASM_ARM_MEMORY_H +#define __ASM_ARM_MEMORY_H + +/* + * User space: 26MB + */ +#define TASK_SIZE (0x01a00000UL) + +/* + * This decides where the kernel will search for a free chunk of vm + * space during mmap's. + */ +#define TASK_UNMAPPED_BASE (TASK_SIZE / 3) + +/* + * Page offset: 32MB + */ +#define PAGE_OFFSET (0x02000000UL) +#define PHYS_OFFSET (0x02000000UL) + +#define PHYS_TO_NID(addr) (0) + +/* + * PFNs are used to describe any physical page; this means + * PFN 0 == physical address 0. + * + * This is the PFN of the first RAM page in the kernel + * direct-mapped view. We assume this is the first page + * of RAM in the mem_map as well. + */ +#define PHYS_PFN_OFFSET (PHYS_OFFSET >> PAGE_SHIFT) + +/* + * These are *only* valid on the kernel direct mapped RAM memory. + */ +static inline unsigned long virt_to_phys(void *x) +{ + return (unsigned long)x; +} + +static inline void *phys_to_virt(unsigned long x) +{ + return (void *)((unsigned long)x); +} + +#define __pa(x) (unsigned long)(x) +#define __va(x) ((void *)(unsigned long)(x)) + +/* + * Virtual <-> DMA view memory address translations + * Again, these are *only* valid on the kernel direct mapped RAM + * memory. Use of these is *depreciated*. + */ +#define virt_to_bus(x) ((unsigned long)(x)) +#define bus_to_virt(x) ((void *)((unsigned long)(x))) + +/* + * Conversion between a struct page and a physical address. + * + * Note: when converting an unknown physical address to a + * struct page, the resulting pointer must be validated + * using VALID_PAGE(). It must return an invalid struct page + * for any physical address not corresponding to a system + * RAM address. + * + * page_to_pfn(page) convert a struct page * to a PFN number + * pfn_to_page(pfn) convert a _valid_ PFN number to struct page * + * pfn_valid(pfn) indicates whether a PFN number is valid + * + * virt_to_page(k) convert a _valid_ virtual address to struct page * + * virt_addr_valid(k) indicates whether a virtual address is valid + */ +#define page_to_pfn(page) (((page) - mem_map) + PHYS_PFN_OFFSET) +#define pfn_to_page(pfn) ((mem_map + (pfn)) - PHYS_PFN_OFFSET) +#define pfn_valid(pfn) ((pfn) >= PHYS_PFN_OFFSET && (pfn) < (PHYS_PFN_OFFSET + max_mapnr)) + +#define virt_to_page(kaddr) (pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)) +#define virt_addr_valid(kaddr) ((int)(kaddr) >= PAGE_OFFSET && (int)(kaddr) < (unsigned long)high_memory) + +/* + * For BIO. "will die". Kill me when bio_to_phys() and bvec_to_phys() die. + */ +#define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT) + +/* + * We should really eliminate virt_to_bus() here - it's depreciated. + */ +#define page_to_bus(page) (page_address(page)) + +#endif diff --git a/include/asm-arm26/mman.h b/include/asm-arm26/mman.h new file mode 100644 index 0000000..cc27b82 --- /dev/null +++ b/include/asm-arm26/mman.h @@ -0,0 +1,43 @@ +#ifndef __ARM_MMAN_H__ +#define __ARM_MMAN_H__ + +#define PROT_READ 0x1 /* page can be read */ +#define PROT_WRITE 0x2 /* page can be written */ +#define PROT_EXEC 0x4 /* page can be executed */ +#define PROT_SEM 0x8 /* page may be used for atomic ops */ +#define PROT_NONE 0x0 /* page can not be accessed */ +#define PROT_GROWSDOWN 0x01000000 /* mprotect flag: extend change to start of growsdown vma */ +#define PROT_GROWSUP 0x02000000 /* mprotect flag: extend change to end of growsup vma */ + +#define MAP_SHARED 0x01 /* Share changes */ +#define MAP_PRIVATE 0x02 /* Changes are private */ +#define MAP_TYPE 0x0f /* Mask for type of mapping */ +#define MAP_FIXED 0x10 /* Interpret addr exactly */ +#define MAP_ANONYMOUS 0x20 /* don't use a file */ + +#define MAP_GROWSDOWN 0x0100 /* stack-like segment */ +#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ +#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ +#define MAP_LOCKED 0x2000 /* pages are locked */ +#define MAP_NORESERVE 0x4000 /* don't check for reservations */ +#define MAP_POPULATE 0x8000 /* populate (prefault) page tables */ +#define MAP_NONBLOCK 0x10000 /* do not block on IO */ + +#define MS_ASYNC 1 /* sync memory asynchronously */ +#define MS_INVALIDATE 2 /* invalidate the caches */ +#define MS_SYNC 4 /* synchronous memory sync */ + +#define MCL_CURRENT 1 /* lock all current mappings */ +#define MCL_FUTURE 2 /* lock all future mappings */ + +#define MADV_NORMAL 0x0 /* default page-in behavior */ +#define MADV_RANDOM 0x1 /* page-in minimum required */ +#define MADV_SEQUENTIAL 0x2 /* read-ahead aggressively */ +#define MADV_WILLNEED 0x3 /* pre-fault pages */ +#define MADV_DONTNEED 0x4 /* discard these pages */ + +/* compatibility flags */ +#define MAP_ANON MAP_ANONYMOUS +#define MAP_FILE 0 + +#endif /* __ARM_MMAN_H__ */ diff --git a/include/asm-arm26/mmu.h b/include/asm-arm26/mmu.h new file mode 100644 index 0000000..9b8d3d7 --- /dev/null +++ b/include/asm-arm26/mmu.h @@ -0,0 +1,9 @@ +#ifndef __ARM_MMU_H +#define __ARM_MMU_H + +/* + * The ARM doesn't have a mmu context + */ +typedef struct { } mm_context_t; + +#endif diff --git a/include/asm-arm26/mmu_context.h b/include/asm-arm26/mmu_context.h new file mode 100644 index 0000000..1a929bf --- /dev/null +++ b/include/asm-arm26/mmu_context.h @@ -0,0 +1,51 @@ +/* + * linux/include/asm-arm/mmu_context.h + * + * Copyright (C) 1996 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Changelog: + * 27-06-1996 RMK Created + */ +#ifndef __ASM_ARM_MMU_CONTEXT_H +#define __ASM_ARM_MMU_CONTEXT_H + +#define init_new_context(tsk,mm) 0 +#define destroy_context(mm) do { } while(0) + +/* + * This is called when "tsk" is about to enter lazy TLB mode. + * + * mm: describes the currently active mm context + * tsk: task which is entering lazy tlb + * cpu: cpu number which is entering lazy tlb + * + * tsk->mm will be NULL + */ +static inline void +enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) +{ +} + +/* + * This is the actual mm switch as far as the scheduler + * is concerned. No registers are touched. + */ +static inline void +switch_mm(struct mm_struct *prev, struct mm_struct *next, + struct task_struct *tsk) +{ + cpu_switch_mm(next->pgd, next); +} + +#define deactivate_mm(tsk,mm) do { } while (0) + +static inline void activate_mm(struct mm_struct *prev, struct mm_struct *next) +{ + cpu_switch_mm(next->pgd, next); +} + +#endif diff --git a/include/asm-arm26/module.h b/include/asm-arm26/module.h new file mode 100644 index 0000000..1157f17 --- /dev/null +++ b/include/asm-arm26/module.h @@ -0,0 +1,7 @@ +#ifndef _ASM_ARM_MODULE_H +#define _ASM_ARM_MODULE_H +/* + * This file contains the arm architecture specific module code. + */ + +#endif /* _ASM_ARM_MODULE_H */ diff --git a/include/asm-arm26/msgbuf.h b/include/asm-arm26/msgbuf.h new file mode 100644 index 0000000..33b35b9 --- /dev/null +++ b/include/asm-arm26/msgbuf.h @@ -0,0 +1,31 @@ +#ifndef _ASMARM_MSGBUF_H +#define _ASMARM_MSGBUF_H + +/* + * The msqid64_ds structure for arm architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct msqid64_ds { + struct ipc64_perm msg_perm; + __kernel_time_t msg_stime; /* last msgsnd time */ + unsigned long __unused1; + __kernel_time_t msg_rtime; /* last msgrcv time */ + unsigned long __unused2; + __kernel_time_t msg_ctime; /* last change time */ + unsigned long __unused3; + unsigned long msg_cbytes; /* current number of bytes on queue */ + unsigned long msg_qnum; /* number of messages in queue */ + unsigned long msg_qbytes; /* max number of bytes on queue */ + __kernel_pid_t msg_lspid; /* pid of last msgsnd */ + __kernel_pid_t msg_lrpid; /* last receive pid */ + unsigned long __unused4; + unsigned long __unused5; +}; + +#endif /* _ASMARM_MSGBUF_H */ diff --git a/include/asm-arm26/namei.h b/include/asm-arm26/namei.h new file mode 100644 index 0000000..a402d3b --- /dev/null +++ b/include/asm-arm26/namei.h @@ -0,0 +1,25 @@ +/* + * linux/include/asm-arm/namei.h + * + * Routines to handle famous /usr/gnemul + * Derived from the Sparc version of this file + * + * Included from linux/fs/namei.c + */ + +#ifndef __ASMARM_NAMEI_H +#define __ASMARM_NAMEI_H + +#define ARM_BSD_EMUL "usr/gnemul/bsd/" + +static inline char *__emul_prefix(void) +{ + switch (current->personality) { + case PER_BSD: + return ARM_BSD_EMUL; + default: + return NULL; + } +} + +#endif /* __ASMARM_NAMEI_H */ diff --git a/include/asm-arm26/oldlatches.h b/include/asm-arm26/oldlatches.h new file mode 100644 index 0000000..bc87089 --- /dev/null +++ b/include/asm-arm26/oldlatches.h @@ -0,0 +1,37 @@ +/* + * linux/include/asm-arm/arch-arc/oldlatches.h + * + * Copyright (C) 1996 Russell King, Dave Gilbert + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Modifications: + * 04-04-1998 PJB/RMK Merged arc and a5k versions + */ +#ifndef _ASM_ARCH_OLDLATCH_H +#define _ASM_ARCH_OLDLATCH_H + +#define LATCHA_FDSEL0 (1<<0) +#define LATCHA_FDSEL1 (1<<1) +#define LATCHA_FDSEL2 (1<<2) +#define LATCHA_FDSEL3 (1<<3) +#define LATCHA_FDSELALL (0xf) +#define LATCHA_SIDESEL (1<<4) +#define LATCHA_MOTOR (1<<5) +#define LATCHA_INUSE (1<<6) +#define LATCHA_CHANGERST (1<<7) + +#define LATCHB_FDCDENSITY (1<<1) +#define LATCHB_FDCRESET (1<<3) +#define LATCHB_PRINTSTROBE (1<<4) + +/* newval=(oldval & mask)|newdata */ +void oldlatch_bupdate(unsigned char mask,unsigned char newdata); + +/* newval=(oldval & mask)|newdata */ +void oldlatch_aupdate(unsigned char mask,unsigned char newdata); + +#endif + diff --git a/include/asm-arm26/page.h b/include/asm-arm26/page.h new file mode 100644 index 0000000..c334079 --- /dev/null +++ b/include/asm-arm26/page.h @@ -0,0 +1,115 @@ +#ifndef _ASMARM_PAGE_H +#define _ASMARM_PAGE_H + +#include + +#ifdef __KERNEL__ +#ifndef __ASSEMBLY__ + +extern void __clear_user_page(void *p, unsigned long user); +extern void __copy_user_page(void *to, const void *from, unsigned long user); +extern void copy_page(void *to, const void *from); + +//FIXME these may be wrong on ARM26 +#define clear_user_page(addr,vaddr,pg) \ + do { \ + preempt_disable(); \ + __clear_user_page(addr, vaddr); \ + preempt_enable(); \ + } while (0) + +#define copy_user_page(to,from,vaddr,pg) \ + do { \ + preempt_disable(); \ + __copy_user_page(to, from, vaddr); \ + preempt_enable(); \ + } while (0) + +#define clear_page(page) memzero((void *)(page), PAGE_SIZE) +#define copy_page(to, from) __copy_user_page(to, from, 0); + +#undef STRICT_MM_TYPECHECKS + +#ifdef STRICT_MM_TYPECHECKS +/* + * These are used to make use of C type-checking.. + */ +typedef struct { unsigned long pgd; } pgd_t; +typedef struct { unsigned long pte; } pte_t; +typedef struct { unsigned long pmd; } pmd_t; +typedef struct { unsigned long pgprot; } pgprot_t; + +#define pgd_val(x) ((x).pgd) +#define pte_val(x) ((x).pte) +#define pmd_val(x) ((x).pmd) +#define pgprot_val(x) ((x).pgprot) + +#define __pte(x) ((pte_t) { (x) } ) +#define __pmd(x) ((pmd_t) { (x) } ) +#define __pgprot(x) ((pgprot_t) { (x) } ) + +#else +/* + * .. while these make it easier on the compiler + */ +typedef unsigned long pgd_t; +typedef unsigned long pte_t; +typedef unsigned long pmd_t; +typedef unsigned long pgprot_t; + +//FIXME - should these cast to unsigned long? +#define pgd_val(x) (x) +#define pte_val(x) (x) +#define pmd_val(x) (x) +#define pgprot_val(x) (x) + +#define __pte(x) (x) +#define __pmd(x) (x) +#define __pgprot(x) (x) + +#endif /* STRICT_MM_TYPECHECKS */ +#endif /* !__ASSEMBLY__ */ +#endif /* __KERNEL__ */ + +/* PAGE_SHIFT determines the page size. This is configurable. */ +#if defined(CONFIG_PAGESIZE_16) +#define PAGE_SHIFT 14 /* 16K */ +#else /* default */ +#define PAGE_SHIFT 15 /* 32K */ +#endif + +#define EXEC_PAGESIZE 32768 + +#define PAGE_SIZE (1UL << PAGE_SHIFT) +#define PAGE_MASK (~(PAGE_SIZE-1)) + +/* to align the pointer to the (next) page boundary */ +#define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) + +#ifdef __KERNEL__ +#ifndef __ASSEMBLY__ + +/* Pure 2^n version of get_order */ +static inline int get_order(unsigned long size) +{ + int order; + + size = (size-1) >> (PAGE_SHIFT-1); + order = -1; + do { + size >>= 1; + order++; + } while (size); + return order; +} + +#include + +#endif /* !__ASSEMBLY__ */ + +#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \ + VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC) + +#endif /* __KERNEL__ */ + +#endif diff --git a/include/asm-arm26/param.h b/include/asm-arm26/param.h new file mode 100644 index 0000000..6b1e52d --- /dev/null +++ b/include/asm-arm26/param.h @@ -0,0 +1,33 @@ +/* + * linux/include/asm-arm/param.h + * + * Copyright (C) 1995-1999 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_PARAM_H +#define __ASM_PARAM_H + +#ifndef __KERNEL_HZ +#define __KERNEL_HZ 100 +#endif + +#ifdef __KERNEL__ +# define HZ __KERNEL_HZ /* Internal kernel timer frequency */ +# define USER_HZ 100 /* User interfaces are in "ticks" */ +# define CLOCKS_PER_SEC (USER_HZ) /* like times() */ +#else +# define HZ 100 +#endif + +#ifndef NOGROUP +#define NOGROUP (-1) +#endif + +/* max length of hostname */ +#define MAXHOSTNAMELEN 64 + +#endif + diff --git a/include/asm-arm26/parport.h b/include/asm-arm26/parport.h new file mode 100644 index 0000000..f2f90c7 --- /dev/null +++ b/include/asm-arm26/parport.h @@ -0,0 +1,18 @@ +/* + * linux/include/asm-arm/parport.h: ARM-specific parport initialisation + * + * Copyright (C) 1999, 2000 Tim Waugh + * + * This file should only be included by drivers/parport/parport_pc.c. + */ + +#ifndef __ASMARM_PARPORT_H +#define __ASMARM_PARPORT_H + +static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma); +static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma) +{ + return parport_pc_find_isa_ports (autoirq, autodma); +} + +#endif /* !(_ASMARM_PARPORT_H) */ diff --git a/include/asm-arm26/pci.h b/include/asm-arm26/pci.h new file mode 100644 index 0000000..6ac67ed --- /dev/null +++ b/include/asm-arm26/pci.h @@ -0,0 +1,6 @@ +/* Should not be needed. IDE stupidity */ +/* JMA 18.05.03 - is kinda needed, if only to tell it we don't have a PCI bus */ + +#define PCI_DMA_BUS_IS_PHYS 0 +#define pcibios_scan_all_fns(a, b) 0 + diff --git a/include/asm-arm26/percpu.h b/include/asm-arm26/percpu.h new file mode 100644 index 0000000..b4e32d8 --- /dev/null +++ b/include/asm-arm26/percpu.h @@ -0,0 +1,6 @@ +#ifndef __ARM_PERCPU +#define __ARM_PERCPU + +#include + +#endif diff --git a/include/asm-arm26/pgalloc.h b/include/asm-arm26/pgalloc.h new file mode 100644 index 0000000..6437167 --- /dev/null +++ b/include/asm-arm26/pgalloc.h @@ -0,0 +1,70 @@ +/* + * linux/include/asm-arm/pgalloc.h + * + * Copyright (C) 2000-2001 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _ASMARM_PGALLOC_H +#define _ASMARM_PGALLOC_H + +#include +#include +#include +#include + +extern kmem_cache_t *pte_cache; + +static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr){ + return kmem_cache_alloc(pte_cache, GFP_KERNEL); +} + +static inline void pte_free_kernel(pte_t *pte){ + if (pte) + kmem_cache_free(pte_cache, pte); +} + +/* + * Populate the pmdp entry with a pointer to the pte. This pmd is part + * of the mm address space. + * + * If 'mm' is the init tasks mm, then we are doing a vmalloc, and we + * need to set stuff up correctly for it. + */ +static inline void +pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmdp, pte_t *ptep) +{ +//FIXME - is this doing the right thing? + set_pmd(pmdp, (unsigned long)ptep | 1/*FIXME _PMD_PRESENT*/); +} + +/* + * FIXME - We use the old 2.5.5-rmk1 hack for this. + * This is not truly correct, but should be functional. + */ +#define pte_alloc_one(mm,addr) ((struct page *)pte_alloc_one_kernel(mm,addr)) +#define pte_free(pte) pte_free_kernel((pte_t *)pte) +#define pmd_populate(mm,pmdp,ptep) pmd_populate_kernel(mm,pmdp,(pte_t *)ptep) + +/* + * Since we have only two-level page tables, these are trivial + * + * trick __pmd_alloc into optimising away. The actual value is irrelevant though as it + * is thrown away. It just cant be zero. -IM + */ + +#define pmd_alloc_one(mm,addr) ({ BUG(); ((pmd_t *)2); }) +#define pmd_free(pmd) do { } while (0) +#define pgd_populate(mm,pmd,pte) BUG() + +extern pgd_t *get_pgd_slow(struct mm_struct *mm); +extern void free_pgd_slow(pgd_t *pgd); + +#define pgd_alloc(mm) get_pgd_slow(mm) +#define pgd_free(pgd) free_pgd_slow(pgd) + +#define check_pgt_cache() do { } while (0) + +#endif diff --git a/include/asm-arm26/pgtable.h b/include/asm-arm26/pgtable.h new file mode 100644 index 0000000..af0b890 --- /dev/null +++ b/include/asm-arm26/pgtable.h @@ -0,0 +1,305 @@ +/* + * linux/include/asm-arm26/pgtable.h + * + * Copyright (C) 2000-2002 Russell King + * Copyright (C) 2003 Ian Molton + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef _ASMARM_PGTABLE_H +#define _ASMARM_PGTABLE_H + +#include + +#include +#include + +/* + * The table below defines the page protection levels that we insert into our + * Linux page table version. These get translated into the best that the + * architecture can perform. Note that on most ARM hardware: + * 1) We cannot do execute protection + * 2) If we could do execute protection, then read is implied + * 3) write implies read permissions + */ +#define __P000 PAGE_NONE +#define __P001 PAGE_READONLY +#define __P010 PAGE_COPY +#define __P011 PAGE_COPY +#define __P100 PAGE_READONLY +#define __P101 PAGE_READONLY +#define __P110 PAGE_COPY +#define __P111 PAGE_COPY + +#define __S000 PAGE_NONE +#define __S001 PAGE_READONLY +#define __S010 PAGE_SHARED +#define __S011 PAGE_SHARED +#define __S100 PAGE_READONLY +#define __S101 PAGE_READONLY +#define __S110 PAGE_SHARED +#define __S111 PAGE_SHARED + +/* + * PMD_SHIFT determines the size of the area a second-level page table can map + * PGDIR_SHIFT determines what a third-level page table entry can map + */ +#define PGD_SHIFT 25 +#define PMD_SHIFT 20 + +#define PGD_SIZE (1UL << PGD_SHIFT) +#define PGD_MASK (~(PGD_SIZE-1)) +#define PMD_SIZE (1UL << PMD_SHIFT) +#define PMD_MASK (~(PMD_SIZE-1)) + +/* The kernel likes to use these names for the above (ick) */ +#define PGDIR_SIZE PGD_SIZE +#define PGDIR_MASK PGD_MASK + +#define PTRS_PER_PGD 32 +#define PTRS_PER_PMD 1 +#define PTRS_PER_PTE 32 + +#define FIRST_USER_PGD_NR 1 +#define USER_PTRS_PER_PGD ((TASK_SIZE/PGD_SIZE) - FIRST_USER_PGD_NR) + +// FIXME - WTF? +#define LIBRARY_TEXT_START 0x0c000000 + + + +#ifndef __ASSEMBLY__ +extern void __pte_error(const char *file, int line, unsigned long val); +extern void __pmd_error(const char *file, int line, unsigned long val); +extern void __pgd_error(const char *file, int line, unsigned long val); + +#define pte_ERROR(pte) __pte_error(__FILE__, __LINE__, pte_val(pte)) +#define pmd_ERROR(pmd) __pmd_error(__FILE__, __LINE__, pmd_val(pmd)) +#define pgd_ERROR(pgd) __pgd_error(__FILE__, __LINE__, pgd_val(pgd)) + +/* + * ZERO_PAGE is a global shared page that is always zero: used + * for zero-mapped memory areas etc.. + */ +extern struct page *empty_zero_page; +#define ZERO_PAGE(vaddr) (empty_zero_page) + +#define pte_pfn(pte) (pte_val(pte) >> PAGE_SHIFT) +#define pte_page(pte) (pfn_to_page(pte_pfn(pte))) +#define pfn_pte(pfn,prot) (__pte(((pfn) << PAGE_SHIFT) | pgprot_val(prot))) +#define pages_to_mb(x) ((x) >> (20 - PAGE_SHIFT)) +#define mk_pte(page,prot) pfn_pte(page_to_pfn(page),prot) +#define page_pte_prot(page,prot) mk_pte(page, prot) +#define page_pte(page) mk_pte(page, __pgprot(0)) + +/* + * Terminology: PGD = Page Directory, PMD = Page Middle Directory, + * PTE = Page Table Entry + * + * on arm26 we have no 2nd level page table. we simulate this by removing the + * PMD. + * + * pgd_none is 0 to prevernt pmd_alloc() calling __pmd_alloc(). This causes it + * to return pmd_offset(pgd,addr) which is a pointer to the pgd (IOW, a no-op). + * + * however, to work this way, whilst we are allocating 32 pgds, containing 32 + * PTEs, the actual work is done on the PMDs, thus: + * + * instead of mm->pgd->pmd->pte + * we have mm->pgdpmd->pte + * + * IOW, think of PGD operations and PMD ones as being the same thing, just + * that PGD stuff deals with the mm_struct side of things, wheras PMD stuff + * deals with the pte side of things. + * + * additionally, we store some bits in the PGD and PTE pointers: + * PGDs: + * o The lowest (1) bit of the PGD is to determine if it is present or swap. + * o The 2nd bit of the PGD is unused and must be zero. + * o The top 6 bits of the PGD must be zero. + * PTEs: + * o The lower 5 bits of a pte are flags. bit 1 is the 'present' flag. The + * others determine the pages attributes. + * + * the pgd_val, pmd_val, and pte_val macros seem to be private to our code. + * They get the RAW value of the PGD/PMD/PTE entry, including our flags + * encoded into the pointers. + * + * The pgd_offset, pmd_offset, and pte_offset macros are used by the kernel, + * so they shouldnt have our flags attached. + * + * If you understood that, feel free to explain it to me... + * + */ + +#define _PMD_PRESENT (0x01) + +/* These definitions allow us to optimise out stuff like pmd_alloc() */ +#define pgd_none(pgd) (0) +#define pgd_bad(pgd) (0) +#define pgd_present(pgd) (1) +#define pgd_clear(pgdp) do { } while (0) + +/* Whilst these handle our actual 'page directory' (the agglomeration of pgd and pmd) + */ +#define pmd_none(pmd) (!pmd_val(pmd)) +#define pmd_bad(pmd) ((pmd_val(pmd) & 0xfc000002)) +#define pmd_present(pmd) (pmd_val(pmd) & _PMD_PRESENT) +#define set_pmd(pmd_ptr, pmd) ((*(pmd_ptr)) = (pmd)) +#define pmd_clear(pmdp) set_pmd(pmdp, __pmd(0)) + +/* and these handle our pte tables */ +#define pte_none(pte) (!pte_val(pte)) +#define pte_present(pte) (pte_val(pte) & _PAGE_PRESENT) +#define set_pte(pte_ptr, pte) ((*(pte_ptr)) = (pte)) +#define set_pte_at(mm,addr,ptep,pteval) set_pte(ptep,pteval) +#define pte_clear(mm,addr,ptep) set_pte_at((mm),(addr),(ptep), __pte(0)) + +/* macros to ease the getting of pointers to stuff... */ +#define pgd_offset(mm, addr) ((pgd_t *)(mm)->pgd + __pgd_index(addr)) +#define pmd_offset(pgd, addr) ((pmd_t *)(pgd)) +#define pte_offset(pmd, addr) ((pte_t *)pmd_page(*(pmd)) + __pte_index(addr)) + +/* there is no __pmd_index as we dont use pmds */ +#define __pgd_index(addr) ((addr) >> PGD_SHIFT) +#define __pte_index(addr) (((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)) + + +/* Keep the kernel happy */ +#define pgd_index(addr) __pgd_index(addr) +#define pgd_offset_k(addr) (pgd_offset(&init_mm, addr)) + +/* + * The vmalloc() routines leaves a hole of 4kB between each vmalloced + * area for the same reason. ;) FIXME: surely 1 page not 4k ? + */ +#define VMALLOC_START 0x01a00000 +#define VMALLOC_END 0x01c00000 + +/* Is pmd_page supposed to return a pointer to a page in some arches? ours seems to + * return a pointer to memory (no special alignment) + */ +#define pmd_page(pmd) ((struct page *)(pmd_val((pmd)) & ~_PMD_PRESENT)) +#define pmd_page_kernel(pmd) ((pte_t *)(pmd_val((pmd)) & ~_PMD_PRESENT)) + +#define pte_offset_kernel(dir,addr) (pmd_page_kernel(*(dir)) + __pte_index(addr)) + +#define pte_offset_map(dir,addr) (pmd_page_kernel(*(dir)) + __pte_index(addr)) +#define pte_offset_map_nested(dir,addr) (pmd_page_kernel(*(dir)) + __pte_index(addr)) +#define pte_unmap(pte) do { } while (0) +#define pte_unmap_nested(pte) do { } while (0) + + +#define _PAGE_PRESENT 0x01 +#define _PAGE_READONLY 0x02 +#define _PAGE_NOT_USER 0x04 +#define _PAGE_OLD 0x08 +#define _PAGE_CLEAN 0x10 + +// an old page has never been read. +// a clean page has never been written. + +/* -- present -- -- !dirty -- --- !write --- ---- !user --- */ +#define PAGE_NONE __pgprot(_PAGE_PRESENT | _PAGE_CLEAN | _PAGE_READONLY | _PAGE_NOT_USER) +#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_CLEAN ) +#define PAGE_COPY __pgprot(_PAGE_PRESENT | _PAGE_CLEAN | _PAGE_READONLY ) +#define PAGE_READONLY __pgprot(_PAGE_PRESENT | _PAGE_CLEAN | _PAGE_READONLY ) +#define PAGE_KERNEL __pgprot(_PAGE_PRESENT | _PAGE_NOT_USER) + +#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_OLD | _PAGE_CLEAN) + +/* + * The following only work if pte_present() is true. + * Undefined behaviour if not.. + */ +#define pte_read(pte) (!(pte_val(pte) & _PAGE_NOT_USER)) +#define pte_write(pte) (!(pte_val(pte) & _PAGE_READONLY)) +#define pte_exec(pte) (!(pte_val(pte) & _PAGE_NOT_USER)) +#define pte_dirty(pte) (!(pte_val(pte) & _PAGE_CLEAN)) +#define pte_young(pte) (!(pte_val(pte) & _PAGE_OLD)) +//ONLY when !pte_present() I think. nicked from arm32 (FIXME!) +#define pte_file(pte) (!(pte_val(pte) & _PAGE_OLD)) + +#define PTE_BIT_FUNC(fn,op) \ +static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; } + +PTE_BIT_FUNC(wrprotect, |= _PAGE_READONLY); +PTE_BIT_FUNC(mkwrite, &= ~_PAGE_READONLY); +PTE_BIT_FUNC(exprotect, |= _PAGE_NOT_USER); +PTE_BIT_FUNC(mkexec, &= ~_PAGE_NOT_USER); +PTE_BIT_FUNC(mkclean, |= _PAGE_CLEAN); +PTE_BIT_FUNC(mkdirty, &= ~_PAGE_CLEAN); +PTE_BIT_FUNC(mkold, |= _PAGE_OLD); +PTE_BIT_FUNC(mkyoung, &= ~_PAGE_OLD); + +/* + * We don't store cache state bits in the page table here. FIXME - or do we? + */ +#define pgprot_noncached(prot) (prot) +#define pgprot_writecombine(prot) (prot) //FIXME - is a no-op? + +extern void pgtable_cache_init(void); + +//FIXME - nicked from arm32 and brutally hacked. probably wrong. +#define pte_to_pgoff(x) (pte_val(x) >> 2) +#define pgoff_to_pte(x) __pte(((x) << 2) & ~_PAGE_OLD) + +//FIXME - next line borrowed from arm32. is it right? +#define PTE_FILE_MAX_BITS 30 + + +static inline pte_t pte_modify(pte_t pte, pgprot_t newprot) +{ + pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot); + return pte; +} + +extern pgd_t swapper_pg_dir[PTRS_PER_PGD]; + +/* Encode and decode a swap entry. + * + * We support up to 32GB of swap on 4k machines + */ +#define __swp_type(x) (((x).val >> 2) & 0x7f) +#define __swp_offset(x) ((x).val >> 9) +#define __swp_entry(type,offset) ((swp_entry_t) { ((type) << 2) | ((offset) << 9) }) +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) +#define __swp_entry_to_pte(swp) ((pte_t) { (swp).val }) + +/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */ +/* FIXME: this is not correct */ +#define kern_addr_valid(addr) (1) + +/* + * Conversion functions: convert a page and protection to a page entry, + * and a page entry and page directory to the page they refer to. + */ +static inline pte_t mk_pte_phys(unsigned long physpage, pgprot_t pgprot) +{ + pte_t pte; + pte_val(pte) = physpage | pgprot_val(pgprot); + return pte; +} + + +#include + +/* + * remap a physical address `phys' of size `size' with page protection `prot' + * into virtual address `from' + */ +#define io_remap_page_range(vma,from,phys,size,prot) \ + remap_pfn_range(vma, from, (phys) >> PAGE_SHIFT, size, prot) + +#define io_remap_pfn_range(vma,from,pfn,size,prot) \ + remap_pfn_range(vma, from, pfn, size, prot) + +#define MK_IOSPACE_PFN(space, pfn) (pfn) +#define GET_IOSPACE(pfn) 0 +#define GET_PFN(pfn) (pfn) + +#endif /* !__ASSEMBLY__ */ + +#endif /* _ASMARM_PGTABLE_H */ diff --git a/include/asm-arm26/poll.h b/include/asm-arm26/poll.h new file mode 100644 index 0000000..fdfdab0 --- /dev/null +++ b/include/asm-arm26/poll.h @@ -0,0 +1,25 @@ +#ifndef __ASMARM_POLL_H +#define __ASMARM_POLL_H + +/* These are specified by iBCS2 */ +#define POLLIN 0x0001 +#define POLLPRI 0x0002 +#define POLLOUT 0x0004 +#define POLLERR 0x0008 +#define POLLHUP 0x0010 +#define POLLNVAL 0x0020 + +/* The rest seem to be more-or-less nonstandard. Check them! */ +#define POLLRDNORM 0x0040 +#define POLLRDBAND 0x0080 +#define POLLWRNORM 0x0100 +#define POLLWRBAND 0x0200 +#define POLLMSG 0x0400 + +struct pollfd { + int fd; + short events; + short revents; +}; + +#endif diff --git a/include/asm-arm26/posix_types.h b/include/asm-arm26/posix_types.h new file mode 100644 index 0000000..b88344a --- /dev/null +++ b/include/asm-arm26/posix_types.h @@ -0,0 +1,80 @@ +/* + * linux/include/asm-arm/posix_types.h + * + * Copyright (C) 1996-1998 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Changelog: + * 27-06-1996 RMK Created + */ +#ifndef __ARCH_ARM_POSIX_TYPES_H +#define __ARCH_ARM_POSIX_TYPES_H + +/* + * This file is generally used by user-level software, so you need to + * be a little careful about namespace pollution etc. Also, we cannot + * assume GCC is being used. + */ + +typedef unsigned long __kernel_ino_t; +typedef unsigned short __kernel_mode_t; +typedef unsigned short __kernel_nlink_t; +typedef long __kernel_off_t; +typedef int __kernel_pid_t; +typedef unsigned short __kernel_ipc_pid_t; +typedef unsigned short __kernel_uid_t; +typedef unsigned short __kernel_gid_t; +typedef unsigned int __kernel_size_t; +typedef int __kernel_ssize_t; +typedef int __kernel_ptrdiff_t; +typedef long __kernel_time_t; +typedef long __kernel_suseconds_t; +typedef long __kernel_clock_t; +typedef int __kernel_timer_t; +typedef int __kernel_clockid_t; +typedef int __kernel_daddr_t; +typedef char * __kernel_caddr_t; +typedef unsigned short __kernel_uid16_t; +typedef unsigned short __kernel_gid16_t; +typedef unsigned int __kernel_uid32_t; +typedef unsigned int __kernel_gid32_t; + +typedef unsigned short __kernel_old_uid_t; +typedef unsigned short __kernel_old_gid_t; + +#ifdef __GNUC__ +typedef long long __kernel_loff_t; +#endif + +typedef struct { +#if defined(__KERNEL__) || defined(__USE_ALL) + int val[2]; +#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */ + int __val[2]; +#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */ +} __kernel_fsid_t; + +#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) + +#undef __FD_SET +#define __FD_SET(fd, fdsetp) \ + (((fd_set *)(fdsetp))->fds_bits[(fd) >> 5] |= (1<<((fd) & 31))) + +#undef __FD_CLR +#define __FD_CLR(fd, fdsetp) \ + (((fd_set *)(fdsetp))->fds_bits[(fd) >> 5] &= ~(1<<((fd) & 31))) + +#undef __FD_ISSET +#define __FD_ISSET(fd, fdsetp) \ + ((((fd_set *)(fdsetp))->fds_bits[(fd) >> 5] & (1<<((fd) & 31))) != 0) + +#undef __FD_ZERO +#define __FD_ZERO(fdsetp) \ + (memset ((fdsetp), 0, sizeof (*(fd_set *)(fdsetp)))) + +#endif + +#endif diff --git a/include/asm-arm26/proc-fns.h b/include/asm-arm26/proc-fns.h new file mode 100644 index 0000000..a831004 --- /dev/null +++ b/include/asm-arm26/proc-fns.h @@ -0,0 +1,49 @@ +/* + * linux/include/asm-arm26/proc-fns.h + * + * Copyright (C) 2000 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASSEMBLY__ + +#include + +/* + * Don't change this structure - ASM code + * relies on it. + */ +extern struct processor { + /* check for any bugs */ + void (*_check_bugs)(void); + /* Set up any processor specifics */ + void (*_proc_init)(void); + /* Disable any processor specifics */ + void (*_proc_fin)(void); + /* set the MEMC hardware mappings */ + void (*_set_pgd)(pgd_t *pgd); + /* XCHG */ + unsigned long (*_xchg_1)(unsigned long x, volatile void *ptr); + unsigned long (*_xchg_4)(unsigned long x, volatile void *ptr); +} processor; + +extern const struct processor arm2_processor_functions; +extern const struct processor arm250_processor_functions; +extern const struct processor arm3_processor_functions; + +#define cpu_check_bugs() processor._check_bugs() +#define cpu_proc_init() processor._proc_init() +#define cpu_proc_fin() processor._proc_fin() +#define cpu_do_idle() do { } while (0) +#define cpu_switch_mm(pgd,mm) processor._set_pgd(pgd) +#define cpu_xchg_1(x,ptr) processor._xchg_1(x,ptr) +#define cpu_xchg_4(x,ptr) processor._xchg_4(x,ptr) + + +//FIXME - these shouldnt be in proc-fn.h +extern void cpu_memc_update_all(pgd_t *pgd); +extern void cpu_memc_update_entry(pgd_t *pgd, unsigned long phys_pte, unsigned long log_addr); + +#endif diff --git a/include/asm-arm26/processor.h b/include/asm-arm26/processor.h new file mode 100644 index 0000000..1d2d5f7 --- /dev/null +++ b/include/asm-arm26/processor.h @@ -0,0 +1,113 @@ +/* + * linux/include/asm-arm26/processor.h + * + * Copyright (C) 1995 Russell King + * Copyright (C) 2003 Ian Molton + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARM_PROCESSOR_H +#define __ASM_ARM_PROCESSOR_H + +/* + * Default implementation of macro that returns current + * instruction pointer ("program counter"). + */ +#define current_text_addr() ({ __label__ _l; _l: &&_l;}) + +#ifdef __KERNEL__ + +#include +#include +#include + +#define KERNEL_STACK_SIZE 4096 + +typedef struct { + void (*put_byte)(void); /* Special calling convention */ + void (*get_byte)(void); /* Special calling convention */ + void (*put_half)(void); /* Special calling convention */ + void (*get_half)(void); /* Special calling convention */ + void (*put_word)(void); /* Special calling convention */ + void (*get_word)(void); /* Special calling convention */ + void (*put_dword)(void); /* Special calling convention */ + unsigned long (*copy_from_user)(void *to, const void *from, unsigned long sz); + unsigned long (*copy_to_user)(void *to, const void *from, unsigned long sz); + unsigned long (*clear_user)(void *addr, unsigned long sz); + unsigned long (*strncpy_from_user)(char *to, const char *from, unsigned long sz); + unsigned long (*strnlen_user)(const char *s, long n); +} uaccess_t; + +extern uaccess_t uaccess_user, uaccess_kernel; + +#define EXTRA_THREAD_STRUCT \ + uaccess_t *uaccess; /* User access functions*/ + +#define EXTRA_THREAD_STRUCT_INIT \ + .uaccess = &uaccess_kernel, + +// FIXME?!! + +#define start_thread(regs,pc,sp) \ +({ \ + unsigned long *stack = (unsigned long *)sp; \ + set_fs(USER_DS); \ + memzero(regs->uregs, sizeof (regs->uregs)); \ + regs->ARM_pc = pc | ~0xfc000003; /* pc */ \ + regs->ARM_sp = sp; /* sp */ \ + regs->ARM_r2 = stack[2]; /* r2 (envp) */ \ + regs->ARM_r1 = stack[1]; /* r1 (argv) */ \ + regs->ARM_r0 = stack[0]; /* r0 (argc) */ \ +}) + +#define KSTK_EIP(tsk) (((unsigned long *)(4096+(unsigned long)(tsk)))[1020]) +#define KSTK_ESP(tsk) (((unsigned long *)(4096+(unsigned long)(tsk)))[1018]) + +struct debug_entry { + u32 address; + u32 insn; +}; + +struct debug_info { + int nsaved; + struct debug_entry bp[2]; +}; + +struct thread_struct { + /* fault info */ + unsigned long address; + unsigned long trap_no; + unsigned long error_code; + /* debugging */ + struct debug_info debug; + EXTRA_THREAD_STRUCT +}; + +#define INIT_THREAD { \ +EXTRA_THREAD_STRUCT_INIT \ +} + +/* Forward declaration, a strange C thing */ +struct task_struct; + +/* Free all resources held by a thread. */ +extern void release_thread(struct task_struct *); + +unsigned long get_wchan(struct task_struct *p); + +#define cpu_relax() barrier() + +/* Prepare to copy thread state - unlazy all lazy status */ +#define prepare_to_copy(tsk) do { } while (0) + +/* + * Create a new kernel thread + */ +extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags); + +#endif + +#endif /* __ASM_ARM_PROCESSOR_H */ diff --git a/include/asm-arm26/procinfo.h b/include/asm-arm26/procinfo.h new file mode 100644 index 0000000..b28624d --- /dev/null +++ b/include/asm-arm26/procinfo.h @@ -0,0 +1,56 @@ +/* + * linux/include/asm-arm/procinfo.h + * + * Copyright (C) 1996-1999 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_PROCINFO_H +#define __ASM_PROCINFO_H + +#ifndef __ASSEMBLY__ + +//struct processor; +//struct cpu_user_fns; + +struct proc_info_item { + const char *manufacturer; + const char *cpu_name; +}; + +/* + * Note! struct processor is always defined if we're + * using MULTI_CPU, otherwise this entry is unused, + * but still exists. + * + * NOTE! The following structure is defined by assembly + * language, NOT C code. For more information, check: + * arch/arm/mm/proc-*.S and arch/arm/kernel/head-armv.S + */ +struct proc_info_list { + unsigned int cpu_val; + unsigned int cpu_mask; + const char *arch_name; + const char *elf_name; + unsigned int elf_hwcap; + struct proc_info_item *info; + struct processor *proc; +}; + +#endif /* __ASSEMBLY__ */ + +#define PROC_INFO_SZ 48 + +#define HWCAP_SWP 1 +#define HWCAP_HALF 2 +#define HWCAP_THUMB 4 +#define HWCAP_26BIT 8 /* Play it safe */ +#define HWCAP_FAST_MULT 16 +#define HWCAP_FPA 32 +#define HWCAP_VFP 64 +#define HWCAP_EDSP 128 +#define HWCAP_JAVA 256 + +#endif diff --git a/include/asm-arm26/ptrace.h b/include/asm-arm26/ptrace.h new file mode 100644 index 0000000..6a46b5a --- /dev/null +++ b/include/asm-arm26/ptrace.h @@ -0,0 +1,104 @@ +#ifndef __ASM_ARM_PTRACE_H +#define __ASM_ARM_PTRACE_H + +#define PTRACE_GETREGS 12 +#define PTRACE_SETREGS 13 +#define PTRACE_GETFPREGS 14 +#define PTRACE_SETFPREGS 15 +#define PTRACE_OLDSETOPTIONS 21 + +/* options set using PTRACE_SETOPTIONS */ +#define PTRACE_O_TRACESYSGOOD 0x00000001 + +#define MODE_USR26 0x00000000 +#define MODE_FIQ26 0x00000001 +#define MODE_IRQ26 0x00000002 +#define MODE_SVC26 0x00000003 +#define MODE_MASK 0x00000003 + +#define PSR_F_BIT 0x04000000 +#define PSR_I_BIT 0x08000000 +#define PSR_V_BIT 0x10000000 +#define PSR_C_BIT 0x20000000 +#define PSR_Z_BIT 0x40000000 +#define PSR_N_BIT 0x80000000 + +#define PCMASK 0xfc000003 + + +#ifndef __ASSEMBLY__ + +#define pc_pointer(v) ((v) & ~PCMASK) /* convert v to pc type address */ +#define instruction_pointer(regs) (pc_pointer((regs)->ARM_pc)) /* get pc */ +#define profile_pc(regs) instruction_pointer(regs) + +/* this struct defines the way the registers are stored on the + stack during a system call. */ + +struct pt_regs { + long uregs[17]; +}; + +#define ARM_pc uregs[15] +#define ARM_lr uregs[14] +#define ARM_sp uregs[13] +#define ARM_ip uregs[12] +#define ARM_fp uregs[11] +#define ARM_r10 uregs[10] +#define ARM_r9 uregs[9] +#define ARM_r8 uregs[8] +#define ARM_r7 uregs[7] +#define ARM_r6 uregs[6] +#define ARM_r5 uregs[5] +#define ARM_r4 uregs[4] +#define ARM_r3 uregs[3] +#define ARM_r2 uregs[2] +#define ARM_r1 uregs[1] +#define ARM_r0 uregs[0] +#define ARM_ORIG_r0 uregs[16] + +#ifdef __KERNEL__ + +#define processor_mode(regs) \ + ((regs)->ARM_pc & MODE_MASK) + +#define user_mode(regs) \ + (processor_mode(regs) == MODE_USR26) + +#define interrupts_enabled(regs) \ + (!((regs)->ARM_pc & PSR_I_BIT)) + +#define fast_interrupts_enabled(regs) \ + (!((regs)->ARM_pc & PSR_F_BIT)) + +#define condition_codes(regs) \ + ((regs)->ARM_pc & (PSR_V_BIT|PSR_C_BIT|PSR_Z_BIT|PSR_N_BIT)) + +/* Are the current registers suitable for user mode? + * (used to maintain security in signal handlers) + */ +static inline int valid_user_regs(struct pt_regs *regs) +{ + if (user_mode(regs) && + (regs->ARM_pc & (PSR_F_BIT | PSR_I_BIT)) == 0) + return 1; + + /* + * force it to be something sensible + */ + regs->ARM_pc &= ~(MODE_MASK | PSR_F_BIT | PSR_I_BIT); + + return 0; +} + +extern void show_regs(struct pt_regs *); + +#define predicate(x) (x & 0xf0000000) +#define PREDICATE_ALWAYS 0xe0000000 + +#endif /* __KERNEL__ */ + +#endif /* __ASSEMBLY__ */ + +#endif + diff --git a/include/asm-arm26/resource.h b/include/asm-arm26/resource.h new file mode 100644 index 0000000..734b581 --- /dev/null +++ b/include/asm-arm26/resource.h @@ -0,0 +1,6 @@ +#ifndef _ARM_RESOURCE_H +#define _ARM_RESOURCE_H + +#include + +#endif diff --git a/include/asm-arm26/scatterlist.h b/include/asm-arm26/scatterlist.h new file mode 100644 index 0000000..d9c056c --- /dev/null +++ b/include/asm-arm26/scatterlist.h @@ -0,0 +1,26 @@ +#ifndef _ASMARM_SCATTERLIST_H +#define _ASMARM_SCATTERLIST_H + +#include + +struct scatterlist { + struct page *page; /* buffer page */ + unsigned int offset; /* buffer offset */ + dma_addr_t dma_address; /* dma address */ + unsigned int length; /* length */ + char *__address; /* for set_dma_addr */ +}; + +/* + * These macros should be used after a pci_map_sg call has been done + * to get bus addresses of each of the SG entries and their lengths. + * You should only work with the number of sg entries pci_map_sg + * returns, or alternatively stop on the first sg_dma_len(sg) which + * is 0. + */ +#define sg_dma_address(sg) ((sg)->dma_address) +#define sg_dma_len(sg) ((sg)->length) + +#define ISA_DMA_THRESHOLD (0xffffffff) + +#endif /* _ASMARM_SCATTERLIST_H */ diff --git a/include/asm-arm26/sections.h b/include/asm-arm26/sections.h new file mode 100644 index 0000000..10b6370 --- /dev/null +++ b/include/asm-arm26/sections.h @@ -0,0 +1,2 @@ +//FIXME - nicked from arm32 - check its correct. +#include diff --git a/include/asm-arm26/segment.h b/include/asm-arm26/segment.h new file mode 100644 index 0000000..9e24c21 --- /dev/null +++ b/include/asm-arm26/segment.h @@ -0,0 +1,11 @@ +#ifndef __ASM_ARM_SEGMENT_H +#define __ASM_ARM_SEGMENT_H + +#define __KERNEL_CS 0x0 +#define __KERNEL_DS 0x0 + +#define __USER_CS 0x1 +#define __USER_DS 0x1 + +#endif /* __ASM_ARM_SEGMENT_H */ + diff --git a/include/asm-arm26/semaphore-helper.h b/include/asm-arm26/semaphore-helper.h new file mode 100644 index 0000000..1d7f198 --- /dev/null +++ b/include/asm-arm26/semaphore-helper.h @@ -0,0 +1,84 @@ +#ifndef ASMARM_SEMAPHORE_HELPER_H +#define ASMARM_SEMAPHORE_HELPER_H + +/* + * These two _must_ execute atomically wrt each other. + */ +static inline void wake_one_more(struct semaphore * sem) +{ + unsigned long flags; + + spin_lock_irqsave(&semaphore_wake_lock, flags); + if (atomic_read(&sem->count) <= 0) + sem->waking++; + spin_unlock_irqrestore(&semaphore_wake_lock, flags); +} + +static inline int waking_non_zero(struct semaphore *sem) +{ + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&semaphore_wake_lock, flags); + if (sem->waking > 0) { + sem->waking--; + ret = 1; + } + spin_unlock_irqrestore(&semaphore_wake_lock, flags); + return ret; +} + +/* + * waking non zero interruptible + * 1 got the lock + * 0 go to sleep + * -EINTR interrupted + * + * We must undo the sem->count down_interruptible() increment while we are + * protected by the spinlock in order to make this atomic_inc() with the + * atomic_read() in wake_one_more(), otherwise we can race. -arca + */ +static inline int waking_non_zero_interruptible(struct semaphore *sem, + struct task_struct *tsk) +{ + unsigned long flags; + int ret = 0; + + spin_lock_irqsave(&semaphore_wake_lock, flags); + if (sem->waking > 0) { + sem->waking--; + ret = 1; + } else if (signal_pending(tsk)) { + atomic_inc(&sem->count); + ret = -EINTR; + } + spin_unlock_irqrestore(&semaphore_wake_lock, flags); + return ret; +} + +/* + * waking_non_zero_try_lock: + * 1 failed to lock + * 0 got the lock + * + * We must undo the sem->count down_interruptible() increment while we are + * protected by the spinlock in order to make this atomic_inc() with the + * atomic_read() in wake_one_more(), otherwise we can race. -arca + */ +static inline int waking_non_zero_trylock(struct semaphore *sem) +{ + unsigned long flags; + int ret = 1; + + spin_lock_irqsave(&semaphore_wake_lock, flags); + if (sem->waking <= 0) + atomic_inc(&sem->count); + else { + sem->waking--; + ret = 0; + } + spin_unlock_irqrestore(&semaphore_wake_lock, flags); + return ret; +} + +#endif diff --git a/include/asm-arm26/semaphore.h b/include/asm-arm26/semaphore.h new file mode 100644 index 0000000..c1b6a1e --- /dev/null +++ b/include/asm-arm26/semaphore.h @@ -0,0 +1,103 @@ +/* + * linux/include/asm-arm/semaphore.h + */ +#ifndef __ASM_ARM_SEMAPHORE_H +#define __ASM_ARM_SEMAPHORE_H + +#include +#include +#include +#include + +#include +#include + +struct semaphore { + atomic_t count; + int sleepers; + wait_queue_head_t wait; +}; + +#define __SEMAPHORE_INIT(name, n) \ +{ \ + .count = ATOMIC_INIT(n), \ + .sleepers = 0, \ + .wait = __WAIT_QUEUE_HEAD_INITIALIZER((name).wait), \ +} + +#define __MUTEX_INITIALIZER(name) \ + __SEMAPHORE_INIT(name,1) + +#define __DECLARE_SEMAPHORE_GENERIC(name,count) \ + struct semaphore name = __SEMAPHORE_INIT(name,count) + +#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC(name,1) +#define DECLARE_MUTEX_LOCKED(name) __DECLARE_SEMAPHORE_GENERIC(name,0) + +static inline void sema_init(struct semaphore *sem, int val) +{ + atomic_set(&sem->count, val); + sem->sleepers = 0; + init_waitqueue_head(&sem->wait); +} + +static inline void init_MUTEX(struct semaphore *sem) +{ + sema_init(sem, 1); +} + +static inline void init_MUTEX_LOCKED(struct semaphore *sem) +{ + sema_init(sem, 0); +} + +/* + * special register calling convention + */ +asmlinkage void __down_failed(void); +asmlinkage int __down_interruptible_failed(void); +asmlinkage int __down_trylock_failed(void); +asmlinkage void __up_wakeup(void); + +extern void __down(struct semaphore * sem); +extern int __down_interruptible(struct semaphore * sem); +extern int __down_trylock(struct semaphore * sem); +extern void __up(struct semaphore * sem); + +/* + * This is ugly, but we want the default case to fall through. + * "__down" is the actual routine that waits... + */ +static inline void down(struct semaphore * sem) +{ + might_sleep(); + __down_op(sem, __down_failed); +} + +/* + * This is ugly, but we want the default case to fall through. + * "__down_interruptible" is the actual routine that waits... + */ +static inline int down_interruptible (struct semaphore * sem) +{ + might_sleep(); + return __down_op_ret(sem, __down_interruptible_failed); +} + +static inline int down_trylock(struct semaphore *sem) +{ + return __down_op_ret(sem, __down_trylock_failed); +} + +/* + * Note! This is subtle. We jump to wake people up only if + * the semaphore was negative (== somebody was waiting on it). + * The default case (no contention) will result in NO + * jumps for both down() and up(). + */ +static inline void up(struct semaphore * sem) +{ + __up_op(sem, __up_wakeup); +} + +#endif diff --git a/include/asm-arm26/sembuf.h b/include/asm-arm26/sembuf.h new file mode 100644 index 0000000..1c02839 --- /dev/null +++ b/include/asm-arm26/sembuf.h @@ -0,0 +1,25 @@ +#ifndef _ASMARM_SEMBUF_H +#define _ASMARM_SEMBUF_H + +/* + * The semid64_ds structure for arm architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct semid64_ds { + struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ + __kernel_time_t sem_otime; /* last semop time */ + unsigned long __unused1; + __kernel_time_t sem_ctime; /* last change time */ + unsigned long __unused2; + unsigned long sem_nsems; /* no. of semaphores in array */ + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* _ASMARM_SEMBUF_H */ diff --git a/include/asm-arm26/serial.h b/include/asm-arm26/serial.h new file mode 100644 index 0000000..21e1df3 --- /dev/null +++ b/include/asm-arm26/serial.h @@ -0,0 +1,63 @@ +/* + * linux/include/asm-arm/serial.h + * + * Copyright (C) 1996 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Changelog: + * 15-10-1996 RMK Created + */ + +#ifndef __ASM_SERIAL_H +#define __ASM_SERIAL_H + +#include + +/* + * This assumes you have a 1.8432 MHz clock for your UART. + * + * It'd be nice if someone built a serial card with a 24.576 MHz + * clock, since the 16550A is capable of handling a top speed of 1.5 + * megabits/second; but this requires the faster clock. + */ +#define BASE_BAUD (1843200 / 16) + +#define STD_COM_FLAGS (ASYNC_BOOT_AUTOCONF | ASYNC_SKIP_TEST) + +#if defined(CONFIG_ARCH_A5K) + /* UART CLK PORT IRQ FLAGS */ + +#define STD_SERIAL_PORT_DEFNS \ + { 0, BASE_BAUD, 0x3F8, 10, STD_COM_FLAGS }, /* ttyS0 */ \ + { 0, BASE_BAUD, 0x2F8, 10, STD_COM_FLAGS }, /* ttyS1 */ + +#else + +#define STD_SERIAL_PORT_DEFNS \ + { 0, BASE_BAUD, 0 , 0, STD_COM_FLAGS }, /* ttyS0 */ \ + { 0, BASE_BAUD, 0 , 0, STD_COM_FLAGS }, /* ttyS1 */ + +#endif + +#define EXTRA_SERIAL_PORT_DEFNS \ + { 0, BASE_BAUD, 0 , 0, STD_COM_FLAGS }, /* ttyS2 */ \ + { 0, BASE_BAUD, 0 , 0, STD_COM_FLAGS }, /* ttyS3 */ \ + { 0, BASE_BAUD, 0 , 0, STD_COM_FLAGS }, /* ttyS4 */ \ + { 0, BASE_BAUD, 0 , 0, STD_COM_FLAGS }, /* ttyS5 */ \ + { 0, BASE_BAUD, 0 , 0, STD_COM_FLAGS }, /* ttyS6 */ \ + { 0, BASE_BAUD, 0 , 0, STD_COM_FLAGS }, /* ttyS7 */ \ + { 0, BASE_BAUD, 0 , 0, STD_COM_FLAGS }, /* ttyS8 */ \ + { 0, BASE_BAUD, 0 , 0, STD_COM_FLAGS }, /* ttyS9 */ \ + { 0, BASE_BAUD, 0 , 0, STD_COM_FLAGS }, /* ttyS10 */ \ + { 0, BASE_BAUD, 0 , 0, STD_COM_FLAGS }, /* ttyS11 */ \ + { 0, BASE_BAUD, 0 , 0, STD_COM_FLAGS }, /* ttyS12 */ \ + { 0, BASE_BAUD, 0 , 0, STD_COM_FLAGS }, /* ttyS13 */ + +#define SERIAL_PORT_DFNS \ + STD_SERIAL_PORT_DEFNS \ + EXTRA_SERIAL_PORT_DEFNS + +#endif diff --git a/include/asm-arm26/setup.h b/include/asm-arm26/setup.h new file mode 100644 index 0000000..6348931 --- /dev/null +++ b/include/asm-arm26/setup.h @@ -0,0 +1,205 @@ +/* + * linux/include/asm/setup.h + * + * Copyright (C) 1997-1999 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Structure passed to kernel to tell it about the + * hardware it's running on. See Documentation/arm/Setup + * for more info. + */ +#ifndef __ASMARM_SETUP_H +#define __ASMARM_SETUP_H + +#define COMMAND_LINE_SIZE 1024 + +/* The list ends with an ATAG_NONE node. */ +#define ATAG_NONE 0x00000000 + +struct tag_header { + u32 size; + u32 tag; +}; + +/* The list must start with an ATAG_CORE node */ +#define ATAG_CORE 0x54410001 + +struct tag_core { + u32 flags; /* bit 0 = read-only */ + u32 pagesize; + u32 rootdev; +}; + +/* it is allowed to have multiple ATAG_MEM nodes */ +#define ATAG_MEM 0x54410002 + +struct tag_mem32 { + u32 size; + u32 start; /* physical start address */ +}; + +/* VGA text type displays */ +#define ATAG_VIDEOTEXT 0x54410003 + +struct tag_videotext { + u8 x; + u8 y; + u16 video_page; + u8 video_mode; + u8 video_cols; + u16 video_ega_bx; + u8 video_lines; + u8 video_isvga; + u16 video_points; +}; + +/* describes how the ramdisk will be used in kernel */ +#define ATAG_RAMDISK 0x54410004 + +struct tag_ramdisk { + u32 flags; /* bit 0 = load, bit 1 = prompt */ + u32 size; /* decompressed ramdisk size in _kilo_ bytes */ + u32 start; /* starting block of floppy-based RAM disk image */ +}; + +/* describes where the compressed ramdisk image lives */ +/* + * this one accidentally used virtual addresses - as such, + * its depreciated. + */ +#define ATAG_INITRD 0x54410005 + +/* describes where the compressed ramdisk image lives */ +#define ATAG_INITRD2 0x54420005 + +struct tag_initrd { + u32 start; /* physical start address */ + u32 size; /* size of compressed ramdisk image in bytes */ +}; + +/* board serial number. "64 bits should be enough for everybody" */ +#define ATAG_SERIAL 0x54410006 + +struct tag_serialnr { + u32 low; + u32 high; +}; + +/* board revision */ +#define ATAG_REVISION 0x54410007 + +struct tag_revision { + u32 rev; +}; + +/* initial values for vesafb-type framebuffers. see struct screen_info + * in include/linux/tty.h + */ +#define ATAG_VIDEOLFB 0x54410008 + +struct tag_videolfb { + u16 lfb_width; + u16 lfb_height; + u16 lfb_depth; + u16 lfb_linelength; + u32 lfb_base; + u32 lfb_size; + u8 red_size; + u8 red_pos; + u8 green_size; + u8 green_pos; + u8 blue_size; + u8 blue_pos; + u8 rsvd_size; + u8 rsvd_pos; +}; + +/* command line: \0 terminated string */ +#define ATAG_CMDLINE 0x54410009 + +struct tag_cmdline { + char cmdline[1]; /* this is the minimum size */ +}; + +/* acorn RiscPC specific information */ +#define ATAG_ACORN 0x41000101 + +struct tag_acorn { + u32 memc_control_reg; + u32 vram_pages; + u8 sounddefault; + u8 adfsdrives; +}; + +/* footbridge memory clock, see arch/arm/mach-footbridge/arch.c */ +#define ATAG_MEMCLK 0x41000402 + +struct tag_memclk { + u32 fmemclk; +}; + +struct tag { + struct tag_header hdr; + union { + struct tag_core core; + struct tag_mem32 mem; + struct tag_videotext videotext; + struct tag_ramdisk ramdisk; + struct tag_initrd initrd; + struct tag_serialnr serialnr; + struct tag_revision revision; + struct tag_videolfb videolfb; + struct tag_cmdline cmdline; + + /* + * Acorn specific + */ + struct tag_acorn acorn; + + /* + * DC21285 specific + */ + struct tag_memclk memclk; + } u; +}; + +struct tagtable { + u32 tag; + int (*parse)(const struct tag *); +}; + +#define __tag __attribute_used__ __attribute__((__section__(".taglist"))) +#define __tagtable(tag, fn) \ +static struct tagtable __tagtable_##fn __tag = { tag, fn } + +#define tag_member_present(tag,member) \ + ((unsigned long)(&((struct tag *)0L)->member + 1) \ + <= (tag)->hdr.size * 4) + +#define tag_next(t) ((struct tag *)((u32 *)(t) + (t)->hdr.size)) +#define tag_size(type) ((sizeof(struct tag_header) + sizeof(struct type)) >> 2) + +#define for_each_tag(t,base) \ + for (t = base; t->hdr.size; t = tag_next(t)) + +/* + * Memory map description + */ +#define NR_BANKS 8 + +struct meminfo { + int nr_banks; + unsigned long end; + struct { + unsigned long start; + unsigned long size; + int node; + } bank[NR_BANKS]; +}; + +extern struct meminfo meminfo; + +#endif diff --git a/include/asm-arm26/shmbuf.h b/include/asm-arm26/shmbuf.h new file mode 100644 index 0000000..2e5c67b --- /dev/null +++ b/include/asm-arm26/shmbuf.h @@ -0,0 +1,42 @@ +#ifndef _ASMARM_SHMBUF_H +#define _ASMARM_SHMBUF_H + +/* + * The shmid64_ds structure for arm architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct shmid64_ds { + struct ipc64_perm shm_perm; /* operation perms */ + size_t shm_segsz; /* size of segment (bytes) */ + __kernel_time_t shm_atime; /* last attach time */ + unsigned long __unused1; + __kernel_time_t shm_dtime; /* last detach time */ + unsigned long __unused2; + __kernel_time_t shm_ctime; /* last change time */ + unsigned long __unused3; + __kernel_pid_t shm_cpid; /* pid of creator */ + __kernel_pid_t shm_lpid; /* pid of last operator */ + unsigned long shm_nattch; /* no. of current attaches */ + unsigned long __unused4; + unsigned long __unused5; +}; + +struct shminfo64 { + unsigned long shmmax; + unsigned long shmmin; + unsigned long shmmni; + unsigned long shmseg; + unsigned long shmall; + unsigned long __unused1; + unsigned long __unused2; + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* _ASMARM_SHMBUF_H */ diff --git a/include/asm-arm26/shmparam.h b/include/asm-arm26/shmparam.h new file mode 100644 index 0000000..d374868 --- /dev/null +++ b/include/asm-arm26/shmparam.h @@ -0,0 +1,15 @@ +#ifndef _ASMARM_SHMPARAM_H +#define _ASMARM_SHMPARAM_H + +#ifndef SHMMAX +#define SHMMAX 0x003fa000 +#endif + +/* + * This should be the size of the virtually indexed cache/ways, + * or page size, whichever is greater since the cache aliases + * every size/ways bytes. + */ +#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */ + +#endif /* _ASMARM_SHMPARAM_H */ diff --git a/include/asm-arm26/sigcontext.h b/include/asm-arm26/sigcontext.h new file mode 100644 index 0000000..013ad20 --- /dev/null +++ b/include/asm-arm26/sigcontext.h @@ -0,0 +1,33 @@ +#ifndef _ASMARM_SIGCONTEXT_H +#define _ASMARM_SIGCONTEXT_H + +/* + * Signal context structure - contains all info to do with the state + * before the signal handler was invoked. Note: only add new entries + * to the end of the structure. + */ +struct sigcontext { + unsigned long trap_no; + unsigned long error_code; + unsigned long oldmask; + unsigned long arm_r0; + unsigned long arm_r1; + unsigned long arm_r2; + unsigned long arm_r3; + unsigned long arm_r4; + unsigned long arm_r5; + unsigned long arm_r6; + unsigned long arm_r7; + unsigned long arm_r8; + unsigned long arm_r9; + unsigned long arm_r10; + unsigned long arm_fp; + unsigned long arm_ip; + unsigned long arm_sp; + unsigned long arm_lr; + unsigned long arm_pc; + unsigned long fault_address; +}; + + +#endif diff --git a/include/asm-arm26/siginfo.h b/include/asm-arm26/siginfo.h new file mode 100644 index 0000000..5e21852 --- /dev/null +++ b/include/asm-arm26/siginfo.h @@ -0,0 +1,6 @@ +#ifndef _ASMARM_SIGINFO_H +#define _ASMARM_SIGINFO_H + +#include + +#endif diff --git a/include/asm-arm26/signal.h b/include/asm-arm26/signal.h new file mode 100644 index 0000000..6f62e51 --- /dev/null +++ b/include/asm-arm26/signal.h @@ -0,0 +1,201 @@ +#ifndef _ASMARM_SIGNAL_H +#define _ASMARM_SIGNAL_H + +#include + +/* Avoid too many header ordering problems. */ +struct siginfo; + +#ifdef __KERNEL__ +/* Most things should be clean enough to redefine this at will, if care + is taken to make libc match. */ + +#define _NSIG 64 +#define _NSIG_BPW 32 +#define _NSIG_WORDS (_NSIG / _NSIG_BPW) + +typedef unsigned long old_sigset_t; /* at least 32 bits */ + +typedef struct { + unsigned long sig[_NSIG_WORDS]; +} sigset_t; + +#else +/* Here we must cater to libcs that poke about in kernel headers. */ + +#define NSIG 32 +typedef unsigned long sigset_t; + +#endif /* __KERNEL__ */ + +#define SIGHUP 1 +#define SIGINT 2 +#define SIGQUIT 3 +#define SIGILL 4 +#define SIGTRAP 5 +#define SIGABRT 6 +#define SIGIOT 6 +#define SIGBUS 7 +#define SIGFPE 8 +#define SIGKILL 9 +#define SIGUSR1 10 +#define SIGSEGV 11 +#define SIGUSR2 12 +#define SIGPIPE 13 +#define SIGALRM 14 +#define SIGTERM 15 +#define SIGSTKFLT 16 +#define SIGCHLD 17 +#define SIGCONT 18 +#define SIGSTOP 19 +#define SIGTSTP 20 +#define SIGTTIN 21 +#define SIGTTOU 22 +#define SIGURG 23 +#define SIGXCPU 24 +#define SIGXFSZ 25 +#define SIGVTALRM 26 +#define SIGPROF 27 +#define SIGWINCH 28 +#define SIGIO 29 +#define SIGPOLL SIGIO +/* +#define SIGLOST 29 +*/ +#define SIGPWR 30 +#define SIGSYS 31 +#define SIGUNUSED 31 + +/* These should not be considered constants from userland. */ +#define SIGRTMIN 32 +#define SIGRTMAX _NSIG + +#define SIGSWI 32 + +/* + * SA_FLAGS values: + * + * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. + * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. + * SA_SIGINFO deliver the signal with SIGINFO structs + * SA_THIRTYTWO delivers the signal in 32-bit mode, even if the task + * is running in 26-bit. + * SA_ONSTACK allows alternate signal stacks (see sigaltstack(2)). + * SA_RESTART flag to get restarting signals (which were the default long ago) + * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the + * SA_NODEFER prevents the current signal from being masked in the handler. + * SA_RESETHAND clears the handler when the signal is delivered. + * + * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single + * Unix names RESETHAND and NODEFER respectively. + */ +#define SA_NOCLDSTOP 0x00000001 +#define SA_NOCLDWAIT 0x00000002 /* not supported yet */ +#define SA_SIGINFO 0x00000004 +#define SA_THIRTYTWO 0x02000000 +#define SA_RESTORER 0x04000000 +#define SA_ONSTACK 0x08000000 +#define SA_RESTART 0x10000000 +#define SA_NODEFER 0x40000000 +#define SA_RESETHAND 0x80000000 + +#define SA_NOMASK SA_NODEFER +#define SA_ONESHOT SA_RESETHAND +#define SA_INTERRUPT 0x20000000 /* dummy -- ignored */ + + +/* + * sigaltstack controls + */ +#define SS_ONSTACK 1 +#define SS_DISABLE 2 + +#define MINSIGSTKSZ 2048 +#define SIGSTKSZ 8192 + +#ifdef __KERNEL__ + +/* + * These values of sa_flags are used only by the kernel as part of the + * irq handling routines. + * + * SA_INTERRUPT is also used by the irq handling routines. + * SA_SHIRQ is for shared interrupt support on PCI and EISA. + */ +#define SA_PROBE 0x80000000 +#define SA_SAMPLE_RANDOM 0x10000000 +#define SA_IRQNOMASK 0x08000000 +#define SA_SHIRQ 0x04000000 +#endif + +#define SIG_BLOCK 0 /* for blocking signals */ +#define SIG_UNBLOCK 1 /* for unblocking signals */ +#define SIG_SETMASK 2 /* for setting the signal mask */ + +/* Type of a signal handler. */ +typedef void (*__sighandler_t)(int); + +#define SIG_DFL ((__sighandler_t)0) /* default signal handling */ +#define SIG_IGN ((__sighandler_t)1) /* ignore signal */ +#define SIG_ERR ((__sighandler_t)-1) /* error return from signal */ + +#ifdef __KERNEL__ +struct old_sigaction { + __sighandler_t sa_handler; + old_sigset_t sa_mask; + unsigned long sa_flags; + void (*sa_restorer)(void); +}; + +struct sigaction { + __sighandler_t sa_handler; + unsigned long sa_flags; + void (*sa_restorer)(void); + sigset_t sa_mask; /* mask last for extensibility */ +}; + +struct k_sigaction { + struct sigaction sa; +}; + +#else +/* Here we must cater to libcs that poke about in kernel headers. */ + +struct sigaction { + union { + __sighandler_t _sa_handler; + void (*_sa_sigaction)(int, struct siginfo *, void *); + } _u; + sigset_t sa_mask; + unsigned long sa_flags; + void (*sa_restorer)(void); +}; + +#define sa_handler _u._sa_handler +#define sa_sigaction _u._sa_sigaction + +#endif /* __KERNEL__ */ + +typedef struct sigaltstack { + void *ss_sp; + int ss_flags; + size_t ss_size; +} stack_t; + +#ifdef __KERNEL__ +#include + +#define sigmask(sig) (1UL << ((sig) - 1)) +//FIXME!!! +//#define HAVE_ARCH_GET_SIGNAL_TO_DELIVER + +#endif + + +#ifdef __KERNEL__ +#include +#define ptrace_signal_deliver(regs, cookie) do { } while (0) +#endif + + +#endif diff --git a/include/asm-arm26/sizes.h b/include/asm-arm26/sizes.h new file mode 100644 index 0000000..f8d92ca --- /dev/null +++ b/include/asm-arm26/sizes.h @@ -0,0 +1,52 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ +/* DO NOT EDIT!! - this file automatically generated + * from .s file by awk -f s2h.awk + */ +/* Size defintions + * Copyright (C) ARM Limited 1998. All rights reserved. + */ + +#ifndef __sizes_h +#define __sizes_h 1 + +/* handy sizes */ +#define SZ_1K 0x00000400 +#define SZ_4K 0x00001000 +#define SZ_8K 0x00002000 +#define SZ_16K 0x00004000 +#define SZ_64K 0x00010000 +#define SZ_128K 0x00020000 +#define SZ_256K 0x00040000 +#define SZ_512K 0x00080000 + +#define SZ_1M 0x00100000 +#define SZ_2M 0x00200000 +#define SZ_4M 0x00400000 +#define SZ_8M 0x00800000 +#define SZ_16M 0x01000000 +#define SZ_32M 0x02000000 +#define SZ_64M 0x04000000 +#define SZ_128M 0x08000000 +#define SZ_256M 0x10000000 +#define SZ_512M 0x20000000 + +#define SZ_1G 0x40000000 +#define SZ_2G 0x80000000 + +#endif + +/* END */ diff --git a/include/asm-arm26/smp.h b/include/asm-arm26/smp.h new file mode 100644 index 0000000..5ca7716 --- /dev/null +++ b/include/asm-arm26/smp.h @@ -0,0 +1,10 @@ +#ifndef __ASM_SMP_H +#define __ASM_SMP_H + +#include + +#ifdef CONFIG_SMP +#error SMP not supported +#endif + +#endif diff --git a/include/asm-arm26/socket.h b/include/asm-arm26/socket.h new file mode 100644 index 0000000..46d2058 --- /dev/null +++ b/include/asm-arm26/socket.h @@ -0,0 +1,50 @@ +#ifndef _ASMARM_SOCKET_H +#define _ASMARM_SOCKET_H + +#include + +/* For setsockopt(2) */ +#define SOL_SOCKET 1 + +#define SO_DEBUG 1 +#define SO_REUSEADDR 2 +#define SO_TYPE 3 +#define SO_ERROR 4 +#define SO_DONTROUTE 5 +#define SO_BROADCAST 6 +#define SO_SNDBUF 7 +#define SO_RCVBUF 8 +#define SO_KEEPALIVE 9 +#define SO_OOBINLINE 10 +#define SO_NO_CHECK 11 +#define SO_PRIORITY 12 +#define SO_LINGER 13 +#define SO_BSDCOMPAT 14 +/* To add :#define SO_REUSEPORT 15 */ +#define SO_PASSCRED 16 +#define SO_PEERCRED 17 +#define SO_RCVLOWAT 18 +#define SO_SNDLOWAT 19 +#define SO_RCVTIMEO 20 +#define SO_SNDTIMEO 21 + +/* Security levels - as per NRL IPv6 - don't actually do anything */ +#define SO_SECURITY_AUTHENTICATION 22 +#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 +#define SO_SECURITY_ENCRYPTION_NETWORK 24 + +#define SO_BINDTODEVICE 25 + +/* Socket filtering */ +#define SO_ATTACH_FILTER 26 +#define SO_DETACH_FILTER 27 + +#define SO_PEERNAME 28 +#define SO_TIMESTAMP 29 +#define SCM_TIMESTAMP SO_TIMESTAMP + +#define SO_ACCEPTCONN 30 + +#define SO_PEERSEC 31 + +#endif /* _ASM_SOCKET_H */ diff --git a/include/asm-arm26/sockios.h b/include/asm-arm26/sockios.h new file mode 100644 index 0000000..77c3408 --- /dev/null +++ b/include/asm-arm26/sockios.h @@ -0,0 +1,12 @@ +#ifndef __ARCH_ARM_SOCKIOS_H +#define __ARCH_ARM_SOCKIOS_H + +/* Socket-level I/O control calls. */ +#define FIOSETOWN 0x8901 +#define SIOCSPGRP 0x8902 +#define FIOGETOWN 0x8903 +#define SIOCGPGRP 0x8904 +#define SIOCATMARK 0x8905 +#define SIOCGSTAMP 0x8906 /* Get stamp */ + +#endif diff --git a/include/asm-arm26/spinlock.h b/include/asm-arm26/spinlock.h new file mode 100644 index 0000000..e92e81d --- /dev/null +++ b/include/asm-arm26/spinlock.h @@ -0,0 +1,6 @@ +#ifndef __ASM_SPINLOCK_H +#define __ASM_SPINLOCK_H + +#error ARM architecture does not support SMP spin locks + +#endif /* __ASM_SPINLOCK_H */ diff --git a/include/asm-arm26/stat.h b/include/asm-arm26/stat.h new file mode 100644 index 0000000..e4abc4f --- /dev/null +++ b/include/asm-arm26/stat.h @@ -0,0 +1,77 @@ +#ifndef _ASMARM_STAT_H +#define _ASMARM_STAT_H + +struct __old_kernel_stat { + unsigned short st_dev; + unsigned short st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned short st_rdev; + unsigned long st_size; + unsigned long st_atime; + unsigned long st_mtime; + unsigned long st_ctime; +}; + +struct stat { + unsigned short st_dev; + unsigned short __pad1; + unsigned long st_ino; + unsigned short st_mode; + unsigned short st_nlink; + unsigned short st_uid; + unsigned short st_gid; + unsigned short st_rdev; + unsigned short __pad2; + unsigned long st_size; + unsigned long st_blksize; + unsigned long st_blocks; + unsigned long st_atime; + unsigned long st_atime_nsec; + unsigned long st_mtime; + unsigned long st_mtime_nsec; + unsigned long st_ctime; + unsigned long st_ctime_nsec; + unsigned long __unused4; + unsigned long __unused5; +}; + +/* This matches struct stat64 in glibc2.1, hence the absolutely + * insane amounts of padding around dev_t's. + */ +struct stat64 { + unsigned long long st_dev; + unsigned char __pad0[4]; + +#define STAT64_HAS_BROKEN_ST_INO 1 + unsigned long __st_ino; + unsigned int st_mode; + unsigned int st_nlink; + + unsigned long st_uid; + unsigned long st_gid; + + unsigned long long st_rdev; + unsigned char __pad3[4]; + + long long st_size; + unsigned long st_blksize; + + unsigned long st_blocks; /* Number 512-byte blocks allocated. */ + unsigned long __pad4; /* Future possible st_blocks hi bits */ + + unsigned long st_atime; + unsigned long st_atime_nsec; + + unsigned long st_mtime; + unsigned long st_mtime_nsec; + + unsigned long st_ctime; + unsigned long st_ctime_nsec; + + unsigned long long st_ino; +}; + +#endif diff --git a/include/asm-arm26/statfs.h b/include/asm-arm26/statfs.h new file mode 100644 index 0000000..776dbc8 --- /dev/null +++ b/include/asm-arm26/statfs.h @@ -0,0 +1,8 @@ +#ifndef _ASMARM_STATFS_H +#define _ASMARM_STATFS_H + +//FIXME - this may not be appropriate for arm26. check it out. + +#include + +#endif diff --git a/include/asm-arm26/string.h b/include/asm-arm26/string.h new file mode 100644 index 0000000..2a8ab16 --- /dev/null +++ b/include/asm-arm26/string.h @@ -0,0 +1,43 @@ +#ifndef __ASM_ARM_STRING_H +#define __ASM_ARM_STRING_H + +/* + * We don't do inline string functions, since the + * optimised inline asm versions are not small. + */ + +#define __HAVE_ARCH_STRRCHR +extern char * strrchr(const char * s, int c); + +#define __HAVE_ARCH_STRCHR +extern char * strchr(const char * s, int c); + +#define __HAVE_ARCH_MEMCPY +extern void * memcpy(void *, const void *, __kernel_size_t); + +#define __HAVE_ARCH_MEMMOVE +extern void * memmove(void *, const void *, __kernel_size_t); + +#define __HAVE_ARCH_MEMCHR +extern void * memchr(const void *, int, __kernel_size_t); + +#define __HAVE_ARCH_MEMZERO +#define __HAVE_ARCH_MEMSET +extern void * memset(void *, int, __kernel_size_t); + +extern void __memzero(void *ptr, __kernel_size_t n); + +#define memset(p,v,n) \ + ({ \ + if ((n) != 0) { \ + if (__builtin_constant_p((v)) && (v) == 0) \ + __memzero((p),(n)); \ + else \ + memset((p),(v),(n)); \ + } \ + (p); \ + }) + +#define memzero(p,n) ({ if ((n) != 0) __memzero((p),(n)); (p); }) + +#endif diff --git a/include/asm-arm26/suspend.h b/include/asm-arm26/suspend.h new file mode 100644 index 0000000..5e4c1cc --- /dev/null +++ b/include/asm-arm26/suspend.h @@ -0,0 +1,4 @@ +#ifdef _ASMARM_SUSPEND_H +#define _ASMARM_SUSPEND_H + +#endif diff --git a/include/asm-arm26/sysirq.h b/include/asm-arm26/sysirq.h new file mode 100644 index 0000000..cad250c --- /dev/null +++ b/include/asm-arm26/sysirq.h @@ -0,0 +1,61 @@ +/* + * linux/include/asm-arm/arch-arc/irqs.h + * + * Copyright (C) 1996 Russell King, Dave Gilbert + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Modifications: + * 04-04-1998 PJB Merged arc and a5k versions + */ + +#include + +#if defined(CONFIG_ARCH_A5K) +#define IRQ_PRINTER 0 +#define IRQ_BATLOW 1 +#define IRQ_FLOPPYINDEX 2 +#define IRQ_FLOPPYDISK 12 +#elif defined(CONFIG_ARCH_ARC) +#define IRQ_PRINTERBUSY 0 +#define IRQ_SERIALRING 1 +#define IRQ_PRINTERACK 2 +#define IRQ_FLOPPYCHANGED 12 +#endif + +#define IRQ_VSYNCPULSE 3 +#define IRQ_POWERON 4 +#define IRQ_TIMER0 5 +#define IRQ_TIMER1 6 +#define IRQ_IMMEDIATE 7 +#define IRQ_EXPCARDFIQ 8 +#define IRQ_SOUNDCHANGE 9 +#define IRQ_SERIALPORT 10 +#define IRQ_HARDDISK 11 +#define IRQ_EXPANSIONCARD 13 +#define IRQ_KEYBOARDTX 14 +#define IRQ_KEYBOARDRX 15 + +#if defined(CONFIG_ARCH_A5K) +#define FIQ_SERIALPORT 4 +#elif defined(CONFIG_ARCH_ARC) +#define FIQ_FLOPPYIRQ 1 +#define FIQ_FD1772 FIQ_FLOPPYIRQ +#endif + +#define FIQ_FLOPPYDATA 0 +#define FIQ_ECONET 2 +#define FIQ_EXPANSIONCARD 6 +#define FIQ_FORCE 7 + +#define IRQ_TIMER IRQ_TIMER0 + +/* + * This is the offset of the FIQ "IRQ" numbers + */ +#define FIQ_START 64 + +#define irq_cannonicalize(i) (i) + diff --git a/include/asm-arm26/system.h b/include/asm-arm26/system.h new file mode 100644 index 0000000..f23fac1 --- /dev/null +++ b/include/asm-arm26/system.h @@ -0,0 +1,252 @@ +#ifndef __ASM_ARM_SYSTEM_H +#define __ASM_ARM_SYSTEM_H + +#ifdef __KERNEL__ + +#include + +/* + * This is used to ensure the compiler did actually allocate the register we + * asked it for some inline assembly sequences. Apparently we can't trust + * the compiler from one version to another so a bit of paranoia won't hurt. + * This string is meant to be concatenated with the inline asm string and + * will cause compilation to stop on mismatch. (From ARM32 - may come in handy) + */ +#define __asmeq(x, y) ".ifnc " x "," y " ; .err ; .endif\n\t" + +#ifndef __ASSEMBLY__ + +#include + +struct thread_info; +struct task_struct; + +#if 0 +/* information about the system we're running on */ +extern unsigned int system_rev; +extern unsigned int system_serial_low; +extern unsigned int system_serial_high; +extern unsigned int mem_fclk_21285; + +FIXME - sort this +/* + * We need to turn the caches off before calling the reset vector - RiscOS + * messes up if we don't + */ +#define proc_hard_reset() cpu_proc_fin() + +#endif + +struct pt_regs; + +void die(const char *msg, struct pt_regs *regs, int err) + __attribute__((noreturn)); + +void die_if_kernel(const char *str, struct pt_regs *regs, int err); + +void hook_fault_code(int nr, int (*fn)(unsigned long, unsigned int, + struct pt_regs *), + int sig, const char *name); + +#include + +#define xchg(ptr,x) \ + ((__typeof__(*(ptr)))__xchg((unsigned long)(x),(ptr),sizeof(*(ptr)))) + +#define tas(ptr) (xchg((ptr),1)) + +extern asmlinkage void __backtrace(void); + +#define set_cr(x) \ + __asm__ __volatile__( \ + "mcr p15, 0, %0, c1, c0, 0 @ set CR" \ + : : "r" (x) : "cc") + +#define get_cr() \ + ({ \ + unsigned int __val; \ + __asm__ __volatile__( \ + "mrc p15, 0, %0, c1, c0, 0 @ get CR" \ + : "=r" (__val) : : "cc"); \ + __val; \ + }) + +extern unsigned long cr_no_alignment; /* defined in entry-armv.S */ +extern unsigned long cr_alignment; /* defined in entry-armv.S */ + +#define UDBG_UNDEFINED (1 << 0) +#define UDBG_SYSCALL (1 << 1) +#define UDBG_BADABORT (1 << 2) +#define UDBG_SEGV (1 << 3) +#define UDBG_BUS (1 << 4) + +extern unsigned int user_debug; + +#define vectors_base() (0) + +#define mb() __asm__ __volatile__ ("" : : : "memory") +#define rmb() mb() +#define wmb() mb() +#define nop() __asm__ __volatile__("mov\tr0,r0\t@ nop\n\t"); + +#define read_barrier_depends() do { } while(0) +#define set_mb(var, value) do { var = value; mb(); } while (0) +#define set_wmb(var, value) do { var = value; wmb(); } while (0) + +/* + * We assume knowledge of how + * spin_unlock_irq() and friends are implemented. This avoids + * us needlessly decrementing and incrementing the preempt count. + */ +#define prepare_arch_switch(rq,next) local_irq_enable() +#define finish_arch_switch(rq,prev) spin_unlock(&(rq)->lock) +#define task_running(rq,p) ((rq)->curr == (p)) + +/* + * switch_to(prev, next) should switch from task `prev' to `next' + * `prev' will never be the same as `next'. schedule() itself + * contains the memory barrier to tell GCC not to cache `current'. + */ +extern struct task_struct *__switch_to(struct task_struct *, struct thread_info *, struct thread_info *); + +#define switch_to(prev,next,last) \ +do { \ + last = __switch_to(prev,prev->thread_info,next->thread_info); \ +} while (0) + +/* + * Save the current interrupt enable state & disable IRQs + */ +#define local_irq_save(x) \ + do { \ + unsigned long temp; \ + __asm__ __volatile__( \ +" mov %0, pc @ save_flags_cli\n" \ +" orr %1, %0, #0x08000000\n" \ +" and %0, %0, #0x0c000000\n" \ +" teqp %1, #0\n" \ + : "=r" (x), "=r" (temp) \ + : \ + : "memory"); \ + } while (0) + +/* + * Enable IRQs (sti) + */ +#define local_irq_enable() \ + do { \ + unsigned long temp; \ + __asm__ __volatile__( \ +" mov %0, pc @ sti\n" \ +" bic %0, %0, #0x08000000\n" \ +" teqp %0, #0\n" \ + : "=r" (temp) \ + : \ + : "memory"); \ + } while(0) + +/* + * Disable IRQs (cli) + */ +#define local_irq_disable() \ + do { \ + unsigned long temp; \ + __asm__ __volatile__( \ +" mov %0, pc @ cli\n" \ +" orr %0, %0, #0x08000000\n" \ +" teqp %0, #0\n" \ + : "=r" (temp) \ + : \ + : "memory"); \ + } while(0) + +/* Enable FIQs (stf) */ + +#define __stf() do { \ + unsigned long temp; \ + __asm__ __volatile__( \ +" mov %0, pc @ stf\n" \ +" bic %0, %0, #0x04000000\n" \ +" teqp %0, #0\n" \ + : "=r" (temp)); \ + } while(0) + +/* Disable FIQs (clf) */ + +#define __clf() do { \ + unsigned long temp; \ + __asm__ __volatile__( \ +" mov %0, pc @ clf\n" \ +" orr %0, %0, #0x04000000\n" \ +" teqp %0, #0\n" \ + : "=r" (temp)); \ + } while(0) + + +/* + * Save the current interrupt enable state. + */ +#define local_save_flags(x) \ + do { \ + __asm__ __volatile__( \ +" mov %0, pc @ save_flags\n" \ +" and %0, %0, #0x0c000000\n" \ + : "=r" (x)); \ + } while (0) + + +/* + * restore saved IRQ & FIQ state + */ +#define local_irq_restore(x) \ + do { \ + unsigned long temp; \ + __asm__ __volatile__( \ +" mov %0, pc @ restore_flags\n" \ +" bic %0, %0, #0x0c000000\n" \ +" orr %0, %0, %1\n" \ +" teqp %0, #0\n" \ + : "=&r" (temp) \ + : "r" (x) \ + : "memory"); \ + } while (0) + + +#ifdef CONFIG_SMP +#error SMP not supported +#endif + +#define smp_mb() barrier() +#define smp_rmb() barrier() +#define smp_wmb() barrier() +#define smp_read_barrier_depends() do { } while(0) + +#define clf() __clf() +#define stf() __stf() + +#define irqs_disabled() \ +({ \ + unsigned long flags; \ + local_save_flags(flags); \ + flags & PSR_I_BIT; \ +}) + +static inline unsigned long __xchg(unsigned long x, volatile void *ptr, int size) +{ + extern void __bad_xchg(volatile void *, int); + + switch (size) { + case 1: return cpu_xchg_1(x, ptr); + case 4: return cpu_xchg_4(x, ptr); + default: __bad_xchg(ptr, size); + } + return 0; +} + +#endif /* __ASSEMBLY__ */ + +#define arch_align_stack(x) (x) + +#endif /* __KERNEL__ */ + +#endif diff --git a/include/asm-arm26/termbits.h b/include/asm-arm26/termbits.h new file mode 100644 index 0000000..bbc6e1d --- /dev/null +++ b/include/asm-arm26/termbits.h @@ -0,0 +1,171 @@ +#ifndef __ASM_ARM_TERMBITS_H +#define __ASM_ARM_TERMBITS_H + +typedef unsigned char cc_t; +typedef unsigned int speed_t; +typedef unsigned int tcflag_t; + +#define NCCS 19 +struct termios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ +}; + +/* c_cc characters */ +#define VINTR 0 +#define VQUIT 1 +#define VERASE 2 +#define VKILL 3 +#define VEOF 4 +#define VTIME 5 +#define VMIN 6 +#define VSWTC 7 +#define VSTART 8 +#define VSTOP 9 +#define VSUSP 10 +#define VEOL 11 +#define VREPRINT 12 +#define VDISCARD 13 +#define VWERASE 14 +#define VLNEXT 15 +#define VEOL2 16 + +/* c_iflag bits */ +#define IGNBRK 0000001 +#define BRKINT 0000002 +#define IGNPAR 0000004 +#define PARMRK 0000010 +#define INPCK 0000020 +#define ISTRIP 0000040 +#define INLCR 0000100 +#define IGNCR 0000200 +#define ICRNL 0000400 +#define IUCLC 0001000 +#define IXON 0002000 +#define IXANY 0004000 +#define IXOFF 0010000 +#define IMAXBEL 0020000 +#define IUTF8 0040000 + +/* c_oflag bits */ +#define OPOST 0000001 +#define OLCUC 0000002 +#define ONLCR 0000004 +#define OCRNL 0000010 +#define ONOCR 0000020 +#define ONLRET 0000040 +#define OFILL 0000100 +#define OFDEL 0000200 +#define NLDLY 0000400 +#define NL0 0000000 +#define NL1 0000400 +#define CRDLY 0003000 +#define CR0 0000000 +#define CR1 0001000 +#define CR2 0002000 +#define CR3 0003000 +#define TABDLY 0014000 +#define TAB0 0000000 +#define TAB1 0004000 +#define TAB2 0010000 +#define TAB3 0014000 +#define XTABS 0014000 +#define BSDLY 0020000 +#define BS0 0000000 +#define BS1 0020000 +#define VTDLY 0040000 +#define VT0 0000000 +#define VT1 0040000 +#define FFDLY 0100000 +#define FF0 0000000 +#define FF1 0100000 + +/* c_cflag bit meaning */ +#define CBAUD 0010017 +#define B0 0000000 /* hang up */ +#define B50 0000001 +#define B75 0000002 +#define B110 0000003 +#define B134 0000004 +#define B150 0000005 +#define B200 0000006 +#define B300 0000007 +#define B600 0000010 +#define B1200 0000011 +#define B1800 0000012 +#define B2400 0000013 +#define B4800 0000014 +#define B9600 0000015 +#define B19200 0000016 +#define B38400 0000017 +#define EXTA B19200 +#define EXTB B38400 +#define CSIZE 0000060 +#define CS5 0000000 +#define CS6 0000020 +#define CS7 0000040 +#define CS8 0000060 +#define CSTOPB 0000100 +#define CREAD 0000200 +#define PARENB 0000400 +#define PARODD 0001000 +#define HUPCL 0002000 +#define CLOCAL 0004000 +#define CBAUDEX 0010000 +#define B57600 0010001 +#define B115200 0010002 +#define B230400 0010003 +#define B460800 0010004 +#define B500000 0010005 +#define B576000 0010006 +#define B921600 0010007 +#define B1000000 0010010 +#define B1152000 0010011 +#define B1500000 0010012 +#define B2000000 0010013 +#define B2500000 0010014 +#define B3000000 0010015 +#define B3500000 0010016 +#define B4000000 0010017 +#define CIBAUD 002003600000 /* input baud rate (not used) */ +#define CMSPAR 010000000000 /* mark or space (stick) parity */ +#define CRTSCTS 020000000000 /* flow control */ + +/* c_lflag bits */ +#define ISIG 0000001 +#define ICANON 0000002 +#define XCASE 0000004 +#define ECHO 0000010 +#define ECHOE 0000020 +#define ECHOK 0000040 +#define ECHONL 0000100 +#define NOFLSH 0000200 +#define TOSTOP 0000400 +#define ECHOCTL 0001000 +#define ECHOPRT 0002000 +#define ECHOKE 0004000 +#define FLUSHO 0010000 +#define PENDIN 0040000 +#define IEXTEN 0100000 + +/* tcflow() and TCXONC use these */ +#define TCOOFF 0 +#define TCOON 1 +#define TCIOFF 2 +#define TCION 3 + +/* tcflush() and TCFLSH use these */ +#define TCIFLUSH 0 +#define TCOFLUSH 1 +#define TCIOFLUSH 2 + +/* tcsetattr uses these */ +#define TCSANOW 0 +#define TCSADRAIN 1 +#define TCSAFLUSH 2 + +#endif /* __ASM_ARM_TERMBITS_H */ diff --git a/include/asm-arm26/termios.h b/include/asm-arm26/termios.h new file mode 100644 index 0000000..7b8f5e8 --- /dev/null +++ b/include/asm-arm26/termios.h @@ -0,0 +1,108 @@ +#ifndef __ASM_ARM_TERMIOS_H +#define __ASM_ARM_TERMIOS_H + +#include +#include + +struct winsize { + unsigned short ws_row; + unsigned short ws_col; + unsigned short ws_xpixel; + unsigned short ws_ypixel; +}; + +#define NCC 8 +struct termio { + unsigned short c_iflag; /* input mode flags */ + unsigned short c_oflag; /* output mode flags */ + unsigned short c_cflag; /* control mode flags */ + unsigned short c_lflag; /* local mode flags */ + unsigned char c_line; /* line discipline */ + unsigned char c_cc[NCC]; /* control characters */ +}; + +#ifdef __KERNEL__ +/* intr=^C quit=^| erase=del kill=^U + eof=^D vtime=\0 vmin=\1 sxtc=\0 + start=^Q stop=^S susp=^Z eol=\0 + reprint=^R discard=^U werase=^W lnext=^V + eol2=\0 +*/ +#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" +#endif + +/* modem lines */ +#define TIOCM_LE 0x001 +#define TIOCM_DTR 0x002 +#define TIOCM_RTS 0x004 +#define TIOCM_ST 0x008 +#define TIOCM_SR 0x010 +#define TIOCM_CTS 0x020 +#define TIOCM_CAR 0x040 +#define TIOCM_RNG 0x080 +#define TIOCM_DSR 0x100 +#define TIOCM_CD TIOCM_CAR +#define TIOCM_RI TIOCM_RNG +#define TIOCM_OUT1 0x2000 +#define TIOCM_OUT2 0x4000 +#define TIOCM_LOOP 0x8000 + +/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ + +/* line disciplines */ +#define N_TTY 0 +#define N_SLIP 1 +#define N_MOUSE 2 +#define N_PPP 3 +#define N_STRIP 4 +#define N_AX25 5 +#define N_X25 6 /* X.25 async */ +#define N_6PACK 7 +#define N_MASC 8 /* Reserved for Mobitex module */ +#define N_R3964 9 /* Reserved for Simatic R3964 module */ +#define N_PROFIBUS_FDL 10 /* Reserved for Profibus */ +#define N_IRDA 11 /* Linux IrDa - http://irda.sourceforge.net/ */ +#define N_SMSBLOCK 12 /* SMS block mode - for talking to GSM data cards about SMS messages */ +#define N_HDLC 13 /* synchronous HDLC */ +#define N_SYNC_PPP 14 +#define N_HCI 15 /* Bluetooth HCI UART */ + +#ifdef __KERNEL__ + +/* + * Translate a "termio" structure into a "termios". Ugh. + */ +#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \ + unsigned short __tmp; \ + get_user(__tmp,&(termio)->x); \ + *(unsigned short *) &(termios)->x = __tmp; \ +} + +#define user_termio_to_kernel_termios(termios, termio) \ +({ \ + SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \ + SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \ + SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \ + SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \ + copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ +}) + +/* + * Translate a "termios" structure into a "termio". Ugh. + */ +#define kernel_termios_to_user_termio(termio, termios) \ +({ \ + put_user((termios)->c_iflag, &(termio)->c_iflag); \ + put_user((termios)->c_oflag, &(termio)->c_oflag); \ + put_user((termios)->c_cflag, &(termio)->c_cflag); \ + put_user((termios)->c_lflag, &(termio)->c_lflag); \ + put_user((termios)->c_line, &(termio)->c_line); \ + copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ +}) + +#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios)) +#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios)) + +#endif /* __KERNEL__ */ + +#endif /* __ASM_ARM_TERMIOS_H */ diff --git a/include/asm-arm26/thread_info.h b/include/asm-arm26/thread_info.h new file mode 100644 index 0000000..50f41b5 --- /dev/null +++ b/include/asm-arm26/thread_info.h @@ -0,0 +1,144 @@ +/* + * linux/include/asm-arm26/thread_info.h + * + * Copyright (C) 2002 Russell King. + * Copyright (C) 2003 Ian Molton. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#ifndef __ASM_ARM_THREAD_INFO_H +#define __ASM_ARM_THREAD_INFO_H + +#ifdef __KERNEL__ + +#ifndef __ASSEMBLY__ + +struct task_struct; +struct exec_domain; + +#include +#include +#include +#include + +typedef unsigned long mm_segment_t; + +struct cpu_context_save { + __u32 r4; + __u32 r5; + __u32 r6; + __u32 r7; + __u32 r8; + __u32 r9; + __u32 sl; + __u32 fp; + __u32 sp; + __u32 pc; +}; + +/* + * low level task data that entry.S needs immediate access to. + * We assume cpu_context follows immedately after cpu_domain. + */ +struct thread_info { + unsigned long flags; /* low level flags */ + __s32 preempt_count; /* 0 => preemptable, <0 => bug */ + mm_segment_t addr_limit; /* address limit */ + struct task_struct *task; /* main task structure */ + struct exec_domain *exec_domain; /* execution domain */ + __u32 cpu; /* cpu */ + struct cpu_context_save cpu_context; /* cpu context */ + struct restart_block restart_block; + union fp_state fpstate; +}; + +#define INIT_THREAD_INFO(tsk) \ +{ \ + .task &tsk, \ + .exec_domain &default_exec_domain, \ + .flags 0, \ + .preempt_count 0, \ + .addr_limit KERNEL_DS, \ + .restart_block = { \ + .fn = do_no_restart_syscall, \ + }, \ +} + +#define init_thread_info (init_thread_union.thread_info) +#define init_stack (init_thread_union.stack) + +/* + * how to get the thread information struct from C + */ +static inline struct thread_info *current_thread_info(void) __attribute_const__; + +static inline struct thread_info *current_thread_info(void) +{ + register unsigned long sp asm ("sp"); + return (struct thread_info *)(sp & ~0x1fff); +} + +/* FIXME - PAGE_SIZE < 32K */ +#define THREAD_SIZE (8*32768) // FIXME - this needs attention (see kernel/fork.c which gets a nice div by zero if this is lower than 8*32768 +#define __get_user_regs(x) (((struct pt_regs *)((unsigned long)(x) + THREAD_SIZE - 8)) - 1) + +extern struct thread_info *alloc_thread_info(struct task_struct *task); +extern void free_thread_info(struct thread_info *); + +#define get_thread_info(ti) get_task_struct((ti)->task) +#define put_thread_info(ti) put_task_struct((ti)->task) + +#define thread_saved_pc(tsk) \ + ((unsigned long)(pc_pointer((tsk)->thread_info->cpu_context.pc))) +#define thread_saved_fp(tsk) \ + ((unsigned long)((tsk)->thread_info->cpu_context.fp)) + +#else /* !__ASSEMBLY__ */ + +#define TI_FLAGS 0 +#define TI_PREEMPT 4 +#define TI_ADDR_LIMIT 8 +#define TI_TASK 12 +#define TI_EXEC_DOMAIN 16 +#define TI_CPU 20 +#define TI_CPU_SAVE 24 +#define TI_RESTART_BLOCK 28 +#define TI_FPSTATE 68 + +#endif + +#define PREEMPT_ACTIVE 0x04000000 + +/* + * thread information flags: + * TIF_SYSCALL_TRACE - syscall trace active + * TIF_NOTIFY_RESUME - resumption notification requested + * TIF_SIGPENDING - signal pending + * TIF_NEED_RESCHED - rescheduling necessary + * TIF_USEDFPU - FPU was used by this task this quantum (SMP) + * TIF_POLLING_NRFLAG - true if poll_idle() is polling TIF_NEED_RESCHED + */ +#define TIF_NOTIFY_RESUME 0 +#define TIF_SIGPENDING 1 +#define TIF_NEED_RESCHED 2 +#define TIF_SYSCALL_TRACE 8 +#define TIF_USED_FPU 16 +#define TIF_POLLING_NRFLAG 17 +#define TIF_MEMDIE 18 + +#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME) +#define _TIF_SIGPENDING (1 << TIF_SIGPENDING) +#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED) +#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) +#define _TIF_USED_FPU (1 << TIF_USED_FPU) +#define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG) + +/* + * Change these and you break ASM code in entry-common.S + */ +#define _TIF_WORK_MASK 0x000000ff + +#endif /* __KERNEL__ */ +#endif /* __ASM_ARM_THREAD_INFO_H */ diff --git a/include/asm-arm26/timex.h b/include/asm-arm26/timex.h new file mode 100644 index 0000000..68322fb --- /dev/null +++ b/include/asm-arm26/timex.h @@ -0,0 +1,29 @@ +/* + * linux/include/asm-arm/timex.h + * + * Copyright (C) 1997,1998 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Architecture Specific TIME specifications + */ +#ifndef _ASMARM_TIMEX_H +#define _ASMARM_TIMEX_H + +/* + * On the RiscPC, the clock ticks at 2MHz. + */ +#define CLOCK_TICK_RATE 2000000 + +/* IS THAT RIGHT ON A5000? FIXME */ + +typedef unsigned long cycles_t; + +static inline cycles_t get_cycles (void) +{ + return 0; +} + +#endif diff --git a/include/asm-arm26/tlb.h b/include/asm-arm26/tlb.h new file mode 100644 index 0000000..1316352 --- /dev/null +++ b/include/asm-arm26/tlb.h @@ -0,0 +1,78 @@ +#ifndef __ASMARM_TLB_H +#define __ASMARM_TLB_H + +#include +#include + +/* + * TLB handling. This allows us to remove pages from the page + * tables, and efficiently handle the TLB issues. + */ +struct mmu_gather { + struct mm_struct *mm; + unsigned int freed; + unsigned int fullmm; + + unsigned int flushes; + unsigned int avoided_flushes; +}; + +extern struct mmu_gather mmu_gathers[NR_CPUS]; + +static inline struct mmu_gather * +tlb_gather_mmu(struct mm_struct *mm, unsigned int full_mm_flush) +{ + int cpu = smp_processor_id(); + struct mmu_gather *tlb = &mmu_gathers[cpu]; + + tlb->mm = mm; + tlb->freed = 0; + tlb->fullmm = full_mm_flush; + + return tlb; +} + +static inline void +tlb_finish_mmu(struct mmu_gather *tlb, unsigned long start, unsigned long end) +{ + struct mm_struct *mm = tlb->mm; + unsigned long freed = tlb->freed; + int rss = get_mm_counter(mm, rss); + + if (rss < freed) + freed = rss; + add_mm_counter(mm, rss, -freed); + + if (freed) { + flush_tlb_mm(mm); + tlb->flushes++; + } else { + tlb->avoided_flushes++; + } + + /* keep the page table cache within bounds */ + check_pgt_cache(); +} + + +static inline unsigned int +tlb_is_full_mm(struct mmu_gather *tlb) +{ + return tlb->fullmm; +} + +#define tlb_remove_tlb_entry(tlb,ptep,address) do { } while (0) +//#define tlb_start_vma(tlb,vma) do { } while (0) +//FIXME - ARM32 uses this now that things changed in the kernel. seems like it may be pointless on arm26, however to get things compiling... +#define tlb_start_vma(tlb,vma) \ + do { \ + if (!tlb->fullmm) \ + flush_cache_range(vma, vma->vm_start, vma->vm_end); \ + } while (0) +#define tlb_end_vma(tlb,vma) do { } while (0) + +#define tlb_remove_page(tlb,page) free_page_and_swap_cache(page) +#define pte_free_tlb(tlb,ptep) pte_free(ptep) +#define pmd_free_tlb(tlb,pmdp) pmd_free(pmdp) + +#endif diff --git a/include/asm-arm26/tlbflush.h b/include/asm-arm26/tlbflush.h new file mode 100644 index 0000000..f79c1cb --- /dev/null +++ b/include/asm-arm26/tlbflush.h @@ -0,0 +1,70 @@ +#ifndef __ASMARM_TLBFLUSH_H +#define __ASMARM_TLBFLUSH_H + +/* + * TLB flushing: + * + * - flush_tlb_all() flushes all processes TLBs + * - flush_tlb_mm(mm) flushes the specified mm context TLB's + * - flush_tlb_page(vma, vmaddr) flushes one page + * - flush_tlb_range(vma, start, end) flushes a range of pages + */ + +#define flush_tlb_all() memc_update_all() +#define flush_tlb_mm(mm) memc_update_mm(mm) +#define flush_tlb_page(vma, vmaddr) do { printk("flush_tlb_page\n");} while (0) // IS THIS RIGHT? +#define flush_tlb_range(vma,start,end) \ + do { memc_update_mm(vma->vm_mm); (void)(start); (void)(end); } while (0) +#define flush_tlb_pgtables(mm,start,end) do { printk("flush_tlb_pgtables\n");} while (0) +#define flush_tlb_kernel_range(s,e) do { printk("flush_tlb_range\n");} while (0) + +/* + * The following handle the weird MEMC chip + */ +static inline void memc_update_all(void) +{ + struct task_struct *p; + cpu_memc_update_all(init_mm.pgd); + for_each_process(p) { + if (!p->mm) + continue; + cpu_memc_update_all(p->mm->pgd); + } + processor._set_pgd(current->active_mm->pgd); +} + +static inline void memc_update_mm(struct mm_struct *mm) +{ + cpu_memc_update_all(mm->pgd); + + if (mm == current->active_mm) + processor._set_pgd(mm->pgd); +} + +static inline void +memc_clear(struct mm_struct *mm, struct page *page) +{ + cpu_memc_update_entry(mm->pgd, (unsigned long) page_address(page), 0); + + if (mm == current->active_mm) + processor._set_pgd(mm->pgd); +} + +static inline void +memc_update_addr(struct mm_struct *mm, pte_t pte, unsigned long vaddr) +{ + cpu_memc_update_entry(mm->pgd, pte_val(pte), vaddr); + + if (mm == current->active_mm) + processor._set_pgd(mm->pgd); +} + +static inline void +update_mmu_cache(struct vm_area_struct *vma, unsigned long addr, pte_t pte) +{ + struct mm_struct *mm = vma->vm_mm; +printk("update_mmu_cache\n"); + memc_update_addr(mm, pte, addr); +} + +#endif diff --git a/include/asm-arm26/topology.h b/include/asm-arm26/topology.h new file mode 100644 index 0000000..accbd7c --- /dev/null +++ b/include/asm-arm26/topology.h @@ -0,0 +1,6 @@ +#ifndef _ASM_ARM_TOPOLOGY_H +#define _ASM_ARM_TOPOLOGY_H + +#include + +#endif /* _ASM_ARM_TOPOLOGY_H */ diff --git a/include/asm-arm26/types.h b/include/asm-arm26/types.h new file mode 100644 index 0000000..56cbe57 --- /dev/null +++ b/include/asm-arm26/types.h @@ -0,0 +1,61 @@ +#ifndef __ASM_ARM_TYPES_H +#define __ASM_ARM_TYPES_H + +#ifndef __ASSEMBLY__ + +typedef unsigned short umode_t; + +/* + * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the + * header files exported to user space + */ + +typedef __signed__ char __s8; +typedef unsigned char __u8; + +typedef __signed__ short __s16; +typedef unsigned short __u16; + +typedef __signed__ int __s32; +typedef unsigned int __u32; + +#if defined(__GNUC__) && !defined(__STRICT_ANSI__) +typedef __signed__ long long __s64; +typedef unsigned long long __u64; +#endif + +#endif /* __ASSEMBLY__ */ + +/* + * These aren't exported outside the kernel to avoid name space clashes + */ +#ifdef __KERNEL__ + +#define BITS_PER_LONG 32 + +#ifndef __ASSEMBLY__ + +typedef signed char s8; +typedef unsigned char u8; + +typedef signed short s16; +typedef unsigned short u16; + +typedef signed int s32; +typedef unsigned int u32; + +typedef signed long long s64; +typedef unsigned long long u64; + +/* Dma addresses are 32-bits wide. */ + +typedef u32 dma_addr_t; +typedef u32 dma64_addr_t; + +typedef unsigned int kmem_bufctl_t; + +#endif /* __ASSEMBLY__ */ + +#endif /* __KERNEL__ */ + +#endif diff --git a/include/asm-arm26/uaccess-asm.h b/include/asm-arm26/uaccess-asm.h new file mode 100644 index 0000000..19f798e --- /dev/null +++ b/include/asm-arm26/uaccess-asm.h @@ -0,0 +1,153 @@ +/* + * linux/include/asm-arm/proc-armo/uaccess.h + * + * Copyright (C) 1996 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * The fs functions are implemented on the ARM2 and ARM3 architectures + * manually. + * Use *_user functions to access user memory with faulting behaving + * as though the user is accessing the memory. + * Use set_fs(get_ds()) and then the *_user functions to allow them to + * access kernel memory. + */ + +/* + * These are the values used to represent the user `fs' and the kernel `ds' + * FIXME - the KERNEL_DS should end at 0x03000000 but we want to access ROM at + * 0x03400000. ideally we want to forbid access to the IO space inbetween. + */ +#define KERNEL_DS 0x03FFFFFF +#define USER_DS 0x02000000 + +extern uaccess_t uaccess_user, uaccess_kernel; + +static inline void set_fs (mm_segment_t fs) +{ + current_thread_info()->addr_limit = fs; + current->thread.uaccess = (fs == USER_DS ? &uaccess_user : &uaccess_kernel); +} + +#define __range_ok(addr,size) ({ \ + unsigned long flag, sum; \ + __asm__ __volatile__("subs %1, %0, %3; cmpcs %1, %2; movcs %0, #0" \ + : "=&r" (flag), "=&r" (sum) \ + : "r" (addr), "Ir" (size), "0" (current_thread_info()->addr_limit) \ + : "cc"); \ + flag; }) + +#define __addr_ok(addr) ({ \ + unsigned long flag; \ + __asm__ __volatile__("cmp %2, %0; movlo %0, #0" \ + : "=&r" (flag) \ + : "0" (current_thread_info()->addr_limit), "r" (addr) \ + : "cc"); \ + (flag == 0); }) + +#define __put_user_asm_byte(x,addr,err) \ + __asm__ __volatile__( \ + " mov r0, %1\n" \ + " mov r1, %2\n" \ + " mov r2, %0\n" \ + " mov lr, pc\n" \ + " mov pc, %3\n" \ + " mov %0, r2\n" \ + : "=r" (err) \ + : "r" (x), "r" (addr), "r" (current->thread.uaccess->put_byte), \ + "0" (err) \ + : "r0", "r1", "r2", "lr") + +#define __put_user_asm_half(x,addr,err) \ + __asm__ __volatile__( \ + " mov r0, %1\n" \ + " mov r1, %2\n" \ + " mov r2, %0\n" \ + " mov lr, pc\n" \ + " mov pc, %3\n" \ + " mov %0, r2\n" \ + : "=r" (err) \ + : "r" (x), "r" (addr), "r" (current->thread.uaccess->put_half), \ + "0" (err) \ + : "r0", "r1", "r2", "lr") + +#define __put_user_asm_word(x,addr,err) \ + __asm__ __volatile__( \ + " mov r0, %1\n" \ + " mov r1, %2\n" \ + " mov r2, %0\n" \ + " mov lr, pc\n" \ + " mov pc, %3\n" \ + " mov %0, r2\n" \ + : "=r" (err) \ + : "r" (x), "r" (addr), "r" (current->thread.uaccess->put_word), \ + "0" (err) \ + : "r0", "r1", "r2", "lr") + +#define __put_user_asm_dword(x,addr,err) \ + __asm__ __volatile__( \ + " mov r0, %1\n" \ + " mov r1, %2\n" \ + " mov r2, %0\n" \ + " mov lr, pc\n" \ + " mov pc, %3\n" \ + " mov %0, r2\n" \ + : "=r" (err) \ + : "r" (x), "r" (addr), "r" (current->thread.uaccess->put_dword), \ + "0" (err) \ + : "r0", "r1", "r2", "lr") + +#define __get_user_asm_byte(x,addr,err) \ + __asm__ __volatile__( \ + " mov r0, %2\n" \ + " mov r1, %0\n" \ + " mov lr, pc\n" \ + " mov pc, %3\n" \ + " mov %0, r1\n" \ + " mov %1, r0\n" \ + : "=r" (err), "=r" (x) \ + : "r" (addr), "r" (current->thread.uaccess->get_byte), "0" (err) \ + : "r0", "r1", "r2", "lr") + +#define __get_user_asm_half(x,addr,err) \ + __asm__ __volatile__( \ + " mov r0, %2\n" \ + " mov r1, %0\n" \ + " mov lr, pc\n" \ + " mov pc, %3\n" \ + " mov %0, r1\n" \ + " mov %1, r0\n" \ + : "=r" (err), "=r" (x) \ + : "r" (addr), "r" (current->thread.uaccess->get_half), "0" (err) \ + : "r0", "r1", "r2", "lr") + +#define __get_user_asm_word(x,addr,err) \ + __asm__ __volatile__( \ + " mov r0, %2\n" \ + " mov r1, %0\n" \ + " mov lr, pc\n" \ + " mov pc, %3\n" \ + " mov %0, r1\n" \ + " mov %1, r0\n" \ + : "=r" (err), "=r" (x) \ + : "r" (addr), "r" (current->thread.uaccess->get_word), "0" (err) \ + : "r0", "r1", "r2", "lr") + +#define __do_copy_from_user(to,from,n) \ + (n) = current->thread.uaccess->copy_from_user((to),(from),(n)) + +#define __do_copy_to_user(to,from,n) \ + (n) = current->thread.uaccess->copy_to_user((to),(from),(n)) + +#define __do_clear_user(addr,sz) \ + (sz) = current->thread.uaccess->clear_user((addr),(sz)) + +#define __do_strncpy_from_user(dst,src,count,res) \ + (res) = current->thread.uaccess->strncpy_from_user(dst,src,count) + +#define __do_strnlen_user(s,n,res) \ + (res) = current->thread.uaccess->strnlen_user(s,n) diff --git a/include/asm-arm26/uaccess.h b/include/asm-arm26/uaccess.h new file mode 100644 index 0000000..ab9ce38 --- /dev/null +++ b/include/asm-arm26/uaccess.h @@ -0,0 +1,299 @@ +#ifndef _ASMARM_UACCESS_H +#define _ASMARM_UACCESS_H + +/* + * User space memory access functions + */ +#include +#include + +#define VERIFY_READ 0 +#define VERIFY_WRITE 1 + +/* + * The exception table consists of pairs of addresses: the first is the + * address of an instruction that is allowed to fault, and the second is + * the address at which the program should continue. No registers are + * modified, so it is entirely up to the continuation code to figure out + * what to do. + * + * All the routines below use bits of fixup code that are out of line + * with the main instruction path. This means when everything is well, + * we don't even have to jump over them. Further, they do not intrude + * on our cache or tlb entries. + */ + +struct exception_table_entry +{ + unsigned long insn, fixup; +}; + +/* Returns 0 if exception not found and fixup otherwise. */ +extern unsigned long search_exception_table(unsigned long); +extern int fixup_exception(struct pt_regs *regs); + +#define get_ds() (KERNEL_DS) +#define get_fs() (current_thread_info()->addr_limit) +#define segment_eq(a,b) ((a) == (b)) + +#include + +#define access_ok(type,addr,size) (__range_ok(addr,size) == 0) + +/* this function will go away soon - use access_ok() instead */ +static inline int __deprecated verify_area(int type, const void * addr, unsigned long size) +{ + return access_ok(type, addr, size) ? 0 : -EFAULT; +} + +/* + * Single-value transfer routines. They automatically use the right + * size if we just have the right pointer type. Note that the functions + * which read from user space (*get_*) need to take care not to leak + * kernel data even if the calling code is buggy and fails to check + * the return value. This means zeroing out the destination variable + * or buffer on error. Normally this is done out of line by the + * fixup code, but there are a few places where it intrudes on the + * main code path. When we only write to user space, there is no + * problem. + * + * The "__xxx" versions of the user access functions do not verify the + * address space - it must have been done previously with a separate + * "access_ok()" call. + * + * The "xxx_error" versions set the third argument to EFAULT if an + * error occurs, and leave it unchanged on success. Note that these + * versions are void (ie, don't return a value as such). + */ + +extern int __get_user_1(void *); +extern int __get_user_2(void *); +extern int __get_user_4(void *); +extern int __get_user_8(void *); +extern int __get_user_bad(void); + +#define __get_user_x(__r1,__p,__e,__s,__i...) \ + __asm__ __volatile__ ("bl __get_user_" #__s \ + : "=&r" (__e), "=r" (__r1) \ + : "0" (__p) \ + : __i) + +#define get_user(x,p) \ + ({ \ + const register typeof(*(p)) *__p asm("r0") = (p); \ + register typeof(*(p)) __r1 asm("r1"); \ + register int __e asm("r0"); \ + switch (sizeof(*(p))) { \ + case 1: \ + __get_user_x(__r1, __p, __e, 1, "lr"); \ + break; \ + case 2: \ + __get_user_x(__r1, __p, __e, 2, "r2", "lr"); \ + break; \ + case 4: \ + __get_user_x(__r1, __p, __e, 4, "lr"); \ + break; \ + case 8: \ + __get_user_x(__r1, __p, __e, 8, "lr"); \ + break; \ + default: __e = __get_user_bad(); break; \ + } \ + x = __r1; \ + __e; \ + }) + + +#define __get_user(x,ptr) \ +({ \ + long __gu_err = 0; \ + __get_user_err((x),(ptr),__gu_err); \ + __gu_err; \ +}) + +#define __get_user_error(x,ptr,err) \ +({ \ + __get_user_err((x),(ptr),err); \ + (void) 0; \ +}) + +#define __get_user_err(x,ptr,err) \ +do { \ + unsigned long __gu_addr = (unsigned long)(ptr); \ + unsigned long __gu_val; \ + switch (sizeof(*(ptr))) { \ + case 1: __get_user_asm_byte(__gu_val,__gu_addr,err); break; \ + case 2: __get_user_asm_half(__gu_val,__gu_addr,err); break; \ + case 4: __get_user_asm_word(__gu_val,__gu_addr,err); break; \ + default: (__gu_val) = __get_user_bad(); \ + } \ + (x) = (__typeof__(*(ptr)))__gu_val; \ +} while (0) + +extern int __put_user_1(void *, unsigned int); +extern int __put_user_2(void *, unsigned int); +extern int __put_user_4(void *, unsigned int); +extern int __put_user_8(void *, unsigned long long); +extern int __put_user_bad(void); + +#define __put_user_x(__r1,__p,__e,__s) \ + __asm__ __volatile__ ( \ + __asmeq("%0", "r0") __asmeq("%2", "r1") \ + "bl __put_user_" #__s \ + : "=&r" (__e) \ + : "0" (__p), "r" (__r1) \ + : "ip", "lr", "cc") + +#define put_user(x,p) \ + ({ \ + const register typeof(*(p)) __r1 asm("r1") = (x); \ + const register typeof(*(p)) *__p asm("r0") = (p); \ + register int __e asm("r0"); \ + switch (sizeof(*(__p))) { \ + case 1: \ + __put_user_x(__r1, __p, __e, 1); \ + break; \ + case 2: \ + __put_user_x(__r1, __p, __e, 2); \ + break; \ + case 4: \ + __put_user_x(__r1, __p, __e, 4); \ + break; \ + case 8: \ + __put_user_x(__r1, __p, __e, 8); \ + break; \ + default: __e = __put_user_bad(); break; \ + } \ + __e; \ + }) + +#if 0 +/********************* OLD METHOD *******************/ +#define __put_user_x(__r1,__p,__e,__s,__i...) \ + __asm__ __volatile__ ("bl __put_user_" #__s \ + : "=&r" (__e) \ + : "0" (__p), "r" (__r1) \ + : __i) + +#define put_user(x,p) \ + ({ \ + const register typeof(*(p)) __r1 asm("r1") = (x); \ + const register typeof(*(p)) *__p asm("r0") = (p); \ + register int __e asm("r0"); \ + switch (sizeof(*(p))) { \ + case 1: \ + __put_user_x(__r1, __p, __e, 1, "r2", "lr"); \ + break; \ + case 2: \ + __put_user_x(__r1, __p, __e, 2, "r2", "lr"); \ + break; \ + case 4: \ + __put_user_x(__r1, __p, __e, 4, "r2", "lr"); \ + break; \ + case 8: \ + __put_user_x(__r1, __p, __e, 8, "r2", "ip", "lr"); \ + break; \ + default: __e = __put_user_bad(); break; \ + } \ + __e; \ + }) +/*************************************************/ +#endif + +#define __put_user(x,ptr) \ +({ \ + long __pu_err = 0; \ + __put_user_err((x),(ptr),__pu_err); \ + __pu_err; \ +}) + +#define __put_user_error(x,ptr,err) \ +({ \ + __put_user_err((x),(ptr),err); \ + (void) 0; \ +}) + +#define __put_user_err(x,ptr,err) \ +do { \ + unsigned long __pu_addr = (unsigned long)(ptr); \ + __typeof__(*(ptr)) __pu_val = (x); \ + switch (sizeof(*(ptr))) { \ + case 1: __put_user_asm_byte(__pu_val,__pu_addr,err); break; \ + case 2: __put_user_asm_half(__pu_val,__pu_addr,err); break; \ + case 4: __put_user_asm_word(__pu_val,__pu_addr,err); break; \ + case 8: __put_user_asm_dword(__pu_val,__pu_addr,err); break; \ + default: __put_user_bad(); \ + } \ +} while (0) + +static __inline__ unsigned long copy_from_user(void *to, const void *from, unsigned long n) +{ + if (access_ok(VERIFY_READ, from, n)) + __do_copy_from_user(to, from, n); + else /* security hole - plug it */ + memzero(to, n); + return n; +} + +static __inline__ unsigned long __copy_from_user(void *to, const void *from, unsigned long n) +{ + __do_copy_from_user(to, from, n); + return n; +} + +static __inline__ unsigned long copy_to_user(void *to, const void *from, unsigned long n) +{ + if (access_ok(VERIFY_WRITE, to, n)) + __do_copy_to_user(to, from, n); + return n; +} + +static __inline__ unsigned long __copy_to_user(void *to, const void *from, unsigned long n) +{ + __do_copy_to_user(to, from, n); + return n; +} + +#define __copy_to_user_inatomic __copy_to_user +#define __copy_from_user_inatomic __copy_from_user + +static __inline__ unsigned long clear_user (void *to, unsigned long n) +{ + if (access_ok(VERIFY_WRITE, to, n)) + __do_clear_user(to, n); + return n; +} + +static __inline__ unsigned long __clear_user (void *to, unsigned long n) +{ + __do_clear_user(to, n); + return n; +} + +static __inline__ long strncpy_from_user (char *dst, const char *src, long count) +{ + long res = -EFAULT; + if (access_ok(VERIFY_READ, src, 1)) + __do_strncpy_from_user(dst, src, count, res); + return res; +} + +static __inline__ long __strncpy_from_user (char *dst, const char *src, long count) +{ + long res; + __do_strncpy_from_user(dst, src, count, res); + return res; +} + +#define strlen_user(s) strnlen_user(s, ~0UL >> 1) + +static inline long strnlen_user(const char *s, long n) +{ + unsigned long res = 0; + + if (__addr_ok(s)) + __do_strnlen_user(s, n, res); + + return res; +} + +#endif /* _ASMARM_UACCESS_H */ diff --git a/include/asm-arm26/ucontext.h b/include/asm-arm26/ucontext.h new file mode 100644 index 0000000..f853130 --- /dev/null +++ b/include/asm-arm26/ucontext.h @@ -0,0 +1,12 @@ +#ifndef _ASMARM_UCONTEXT_H +#define _ASMARM_UCONTEXT_H + +struct ucontext { + unsigned long uc_flags; + struct ucontext *uc_link; + stack_t uc_stack; + struct sigcontext uc_mcontext; + sigset_t uc_sigmask; /* mask last for extensibility */ +}; + +#endif /* !_ASMARM_UCONTEXT_H */ diff --git a/include/asm-arm26/unaligned.h b/include/asm-arm26/unaligned.h new file mode 100644 index 0000000..d992782 --- /dev/null +++ b/include/asm-arm26/unaligned.h @@ -0,0 +1,118 @@ +#ifndef __ASM_ARM_UNALIGNED_H +#define __ASM_ARM_UNALIGNED_H + +#include + +extern int __bug_unaligned_x(void *ptr); + +/* + * What is the most efficient way of loading/storing an unaligned value? + * + * That is the subject of this file. Efficiency here is defined as + * minimum code size with minimum register usage for the common cases. + * It is currently not believed that long longs are common, so we + * trade efficiency for the chars, shorts and longs against the long + * longs. + * + * Current stats with gcc 2.7.2.2 for these functions: + * + * ptrsize get: code regs put: code regs + * 1 1 1 1 2 + * 2 3 2 3 2 + * 4 7 3 7 3 + * 8 20 6 16 6 + * + * gcc 2.95.1 seems to code differently: + * + * ptrsize get: code regs put: code regs + * 1 1 1 1 2 + * 2 3 2 3 2 + * 4 7 4 7 4 + * 8 19 8 15 6 + * + * which may or may not be more efficient (depending upon whether + * you can afford the extra registers). Hopefully the gcc 2.95 + * is inteligent enough to decide if it is better to use the + * extra register, but evidence so far seems to suggest otherwise. + * + * Unfortunately, gcc is not able to optimise the high word + * out of long long >> 32, or the low word from long long << 32 + */ + +#define __get_unaligned_2_le(__p) \ + (__p[0] | __p[1] << 8) + +#define __get_unaligned_4_le(__p) \ + (__p[0] | __p[1] << 8 | __p[2] << 16 | __p[3] << 24) + +#define __get_unaligned_le(ptr) \ + ({ \ + __typeof__(*(ptr)) __v; \ + __u8 *__p = (__u8 *)(ptr); \ + switch (sizeof(*(ptr))) { \ + case 1: __v = *(ptr); break; \ + case 2: __v = __get_unaligned_2_le(__p); break; \ + case 4: __v = __get_unaligned_4_le(__p); break; \ + case 8: { \ + unsigned int __v1, __v2; \ + __v2 = __get_unaligned_4_le((__p+4)); \ + __v1 = __get_unaligned_4_le(__p); \ + __v = ((unsigned long long)__v2 << 32 | __v1); \ + } \ + break; \ + default: __v = __bug_unaligned_x(__p); break; \ + } \ + __v; \ + }) + +static inline void __put_unaligned_2_le(__u32 __v, register __u8 *__p) +{ + *__p++ = __v; + *__p++ = __v >> 8; +} + +static inline void __put_unaligned_4_le(__u32 __v, register __u8 *__p) +{ + __put_unaligned_2_le(__v >> 16, __p + 2); + __put_unaligned_2_le(__v, __p); +} + +static inline void __put_unaligned_8_le(const unsigned long long __v, register __u8 *__p) +{ + /* + * tradeoff: 8 bytes of stack for all unaligned puts (2 + * instructions), or an extra register in the long long + * case - go for the extra register. + */ + __put_unaligned_4_le(__v >> 32, __p+4); + __put_unaligned_4_le(__v, __p); +} + +/* + * Try to store an unaligned value as efficiently as possible. + */ +#define __put_unaligned_le(val,ptr) \ + ({ \ + switch (sizeof(*(ptr))) { \ + case 1: \ + *(ptr) = (val); \ + break; \ + case 2: __put_unaligned_2_le((val),(__u8 *)(ptr)); \ + break; \ + case 4: __put_unaligned_4_le((val),(__u8 *)(ptr)); \ + break; \ + case 8: __put_unaligned_8_le((val),(__u8 *)(ptr)); \ + break; \ + default: __bug_unaligned_x(ptr); \ + break; \ + } \ + (void) 0; \ + }) + +/* + * Select endianness + */ +#define get_unaligned __get_unaligned_le +#define put_unaligned __put_unaligned_le + +#endif diff --git a/include/asm-arm26/uncompress.h b/include/asm-arm26/uncompress.h new file mode 100644 index 0000000..df2cba8 --- /dev/null +++ b/include/asm-arm26/uncompress.h @@ -0,0 +1,111 @@ +/* + * linux/include/asm-arm/arch-arc/uncompress.h + * + * Copyright (C) 1996 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#define VIDMEM ((char *)0x02000000) + +int video_num_columns, video_num_lines, video_size_row; +int white, bytes_per_char_h; +extern unsigned long con_charconvtable[256]; + +struct param_struct { + unsigned long page_size; + unsigned long nr_pages; + unsigned long ramdisk_size; + unsigned long mountrootrdonly; + unsigned long rootdev; + unsigned long video_num_cols; + unsigned long video_num_rows; + unsigned long video_x; + unsigned long video_y; + unsigned long memc_control_reg; + unsigned char sounddefault; + unsigned char adfsdrives; + unsigned char bytes_per_char_h; + unsigned char bytes_per_char_v; + unsigned long unused[256/4-11]; +}; + +static struct param_struct *params = (struct param_struct *)0x0207c000; + +/* + * This does not append a newline + */ +static void puts(const char *s) +{ + extern void ll_write_char(char *, unsigned long); + int x,y; + unsigned char c; + char *ptr; + + x = params->video_x; + y = params->video_y; + + while ( ( c = *(unsigned char *)s++ ) != '\0' ) { + if ( c == '\n' ) { + x = 0; + if ( ++y >= video_num_lines ) { + y--; + } + } else { + ptr = VIDMEM + ((y*video_num_columns*params->bytes_per_char_v+x)*bytes_per_char_h); + ll_write_char(ptr, c|(white<<16)); + if ( ++x >= video_num_columns ) { + x = 0; + if ( ++y >= video_num_lines ) { + y--; + } + } + } + } + + params->video_x = x; + params->video_y = y; +} + +static void error(char *x); + +/* + * Setup for decompression + */ +static void arch_decomp_setup(void) +{ + int i; + + video_num_lines = params->video_num_rows; + video_num_columns = params->video_num_cols; + bytes_per_char_h = params->bytes_per_char_h; + video_size_row = video_num_columns * bytes_per_char_h; + if (bytes_per_char_h == 4) + for (i = 0; i < 256; i++) + con_charconvtable[i] = + (i & 128 ? 1 << 0 : 0) | + (i & 64 ? 1 << 4 : 0) | + (i & 32 ? 1 << 8 : 0) | + (i & 16 ? 1 << 12 : 0) | + (i & 8 ? 1 << 16 : 0) | + (i & 4 ? 1 << 20 : 0) | + (i & 2 ? 1 << 24 : 0) | + (i & 1 ? 1 << 28 : 0); + else + for (i = 0; i < 16; i++) + con_charconvtable[i] = + (i & 8 ? 1 << 0 : 0) | + (i & 4 ? 1 << 8 : 0) | + (i & 2 ? 1 << 16 : 0) | + (i & 1 ? 1 << 24 : 0); + + white = bytes_per_char_h == 8 ? 0xfc : 7; + + if (params->nr_pages * params->page_size < 4096*1024) error("<4M of mem\n"); +} + +/* + * nothing to do + */ +#define arch_decomp_wdog() diff --git a/include/asm-arm26/unistd.h b/include/asm-arm26/unistd.h new file mode 100644 index 0000000..dfa0b0c --- /dev/null +++ b/include/asm-arm26/unistd.h @@ -0,0 +1,500 @@ +/* + * linux/include/asm-arm/unistd.h + * + * Copyright (C) 2001-2003 Russell King + * Modified 25/11/04 Ian Molton for arm26. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Please forward _all_ changes to this file to spyro@f2s.com + * no matter what the change is. Thanks! + */ +#ifndef __ASM_ARM_UNISTD_H +#define __ASM_ARM_UNISTD_H + +#include + +#define __NR_SYSCALL_BASE 0x900000 + +/* + * This file contains the system call numbers. + */ + +#define __NR_restart_syscall (__NR_SYSCALL_BASE+ 0) +#define __NR_exit (__NR_SYSCALL_BASE+ 1) +#define __NR_fork (__NR_SYSCALL_BASE+ 2) +#define __NR_read (__NR_SYSCALL_BASE+ 3) +#define __NR_write (__NR_SYSCALL_BASE+ 4) +#define __NR_open (__NR_SYSCALL_BASE+ 5) +#define __NR_close (__NR_SYSCALL_BASE+ 6) + /* 7 was sys_waitpid */ +#define __NR_creat (__NR_SYSCALL_BASE+ 8) +#define __NR_link (__NR_SYSCALL_BASE+ 9) +#define __NR_unlink (__NR_SYSCALL_BASE+ 10) +#define __NR_execve (__NR_SYSCALL_BASE+ 11) +#define __NR_chdir (__NR_SYSCALL_BASE+ 12) +#define __NR_time (__NR_SYSCALL_BASE+ 13) +#define __NR_mknod (__NR_SYSCALL_BASE+ 14) +#define __NR_chmod (__NR_SYSCALL_BASE+ 15) +#define __NR_lchown (__NR_SYSCALL_BASE+ 16) + /* 17 was sys_break */ + /* 18 was sys_stat */ +#define __NR_lseek (__NR_SYSCALL_BASE+ 19) +#define __NR_getpid (__NR_SYSCALL_BASE+ 20) +#define __NR_mount (__NR_SYSCALL_BASE+ 21) +#define __NR_umount (__NR_SYSCALL_BASE+ 22) +#define __NR_setuid (__NR_SYSCALL_BASE+ 23) +#define __NR_getuid (__NR_SYSCALL_BASE+ 24) +#define __NR_stime (__NR_SYSCALL_BASE+ 25) +#define __NR_ptrace (__NR_SYSCALL_BASE+ 26) +#define __NR_alarm (__NR_SYSCALL_BASE+ 27) + /* 28 was sys_fstat */ +#define __NR_pause (__NR_SYSCALL_BASE+ 29) +#define __NR_utime (__NR_SYSCALL_BASE+ 30) + /* 31 was sys_stty */ + /* 32 was sys_gtty */ +#define __NR_access (__NR_SYSCALL_BASE+ 33) +#define __NR_nice (__NR_SYSCALL_BASE+ 34) + /* 35 was sys_ftime */ +#define __NR_sync (__NR_SYSCALL_BASE+ 36) +#define __NR_kill (__NR_SYSCALL_BASE+ 37) +#define __NR_rename (__NR_SYSCALL_BASE+ 38) +#define __NR_mkdir (__NR_SYSCALL_BASE+ 39) +#define __NR_rmdir (__NR_SYSCALL_BASE+ 40) +#define __NR_dup (__NR_SYSCALL_BASE+ 41) +#define __NR_pipe (__NR_SYSCALL_BASE+ 42) +#define __NR_times (__NR_SYSCALL_BASE+ 43) + /* 44 was sys_prof */ +#define __NR_brk (__NR_SYSCALL_BASE+ 45) +#define __NR_setgid (__NR_SYSCALL_BASE+ 46) +#define __NR_getgid (__NR_SYSCALL_BASE+ 47) + /* 48 was sys_signal */ +#define __NR_geteuid (__NR_SYSCALL_BASE+ 49) +#define __NR_getegid (__NR_SYSCALL_BASE+ 50) +#define __NR_acct (__NR_SYSCALL_BASE+ 51) +#define __NR_umount2 (__NR_SYSCALL_BASE+ 52) + /* 53 was sys_lock */ +#define __NR_ioctl (__NR_SYSCALL_BASE+ 54) +#define __NR_fcntl (__NR_SYSCALL_BASE+ 55) + /* 56 was sys_mpx */ +#define __NR_setpgid (__NR_SYSCALL_BASE+ 57) + /* 58 was sys_ulimit */ + /* 59 was sys_olduname */ +#define __NR_umask (__NR_SYSCALL_BASE+ 60) +#define __NR_chroot (__NR_SYSCALL_BASE+ 61) +#define __NR_ustat (__NR_SYSCALL_BASE+ 62) +#define __NR_dup2 (__NR_SYSCALL_BASE+ 63) +#define __NR_getppid (__NR_SYSCALL_BASE+ 64) +#define __NR_getpgrp (__NR_SYSCALL_BASE+ 65) +#define __NR_setsid (__NR_SYSCALL_BASE+ 66) +#define __NR_sigaction (__NR_SYSCALL_BASE+ 67) + /* 68 was sys_sgetmask */ + /* 69 was sys_ssetmask */ +#define __NR_setreuid (__NR_SYSCALL_BASE+ 70) +#define __NR_setregid (__NR_SYSCALL_BASE+ 71) +#define __NR_sigsuspend (__NR_SYSCALL_BASE+ 72) +#define __NR_sigpending (__NR_SYSCALL_BASE+ 73) +#define __NR_sethostname (__NR_SYSCALL_BASE+ 74) +#define __NR_setrlimit (__NR_SYSCALL_BASE+ 75) +#define __NR_getrlimit (__NR_SYSCALL_BASE+ 76) /* Back compat 2GB limited rlimit */ +#define __NR_getrusage (__NR_SYSCALL_BASE+ 77) +#define __NR_gettimeofday (__NR_SYSCALL_BASE+ 78) +#define __NR_settimeofday (__NR_SYSCALL_BASE+ 79) +#define __NR_getgroups (__NR_SYSCALL_BASE+ 80) +#define __NR_setgroups (__NR_SYSCALL_BASE+ 81) +#define __NR_select (__NR_SYSCALL_BASE+ 82) +#define __NR_symlink (__NR_SYSCALL_BASE+ 83) + /* 84 was sys_lstat */ +#define __NR_readlink (__NR_SYSCALL_BASE+ 85) +#define __NR_uselib (__NR_SYSCALL_BASE+ 86) +#define __NR_swapon (__NR_SYSCALL_BASE+ 87) +#define __NR_reboot (__NR_SYSCALL_BASE+ 88) +#define __NR_readdir (__NR_SYSCALL_BASE+ 89) +#define __NR_mmap (__NR_SYSCALL_BASE+ 90) +#define __NR_munmap (__NR_SYSCALL_BASE+ 91) +#define __NR_truncate (__NR_SYSCALL_BASE+ 92) +#define __NR_ftruncate (__NR_SYSCALL_BASE+ 93) +#define __NR_fchmod (__NR_SYSCALL_BASE+ 94) +#define __NR_fchown (__NR_SYSCALL_BASE+ 95) +#define __NR_getpriority (__NR_SYSCALL_BASE+ 96) +#define __NR_setpriority (__NR_SYSCALL_BASE+ 97) + /* 98 was sys_profil */ +#define __NR_statfs (__NR_SYSCALL_BASE+ 99) +#define __NR_fstatfs (__NR_SYSCALL_BASE+100) + /* 101 was sys_ioperm */ +#define __NR_socketcall (__NR_SYSCALL_BASE+102) +#define __NR_syslog (__NR_SYSCALL_BASE+103) +#define __NR_setitimer (__NR_SYSCALL_BASE+104) +#define __NR_getitimer (__NR_SYSCALL_BASE+105) +#define __NR_stat (__NR_SYSCALL_BASE+106) +#define __NR_lstat (__NR_SYSCALL_BASE+107) +#define __NR_fstat (__NR_SYSCALL_BASE+108) + /* 109 was sys_uname */ + /* 110 was sys_iopl */ +#define __NR_vhangup (__NR_SYSCALL_BASE+111) + /* 112 was sys_idle */ +#define __NR_syscall (__NR_SYSCALL_BASE+113) /* syscall to call a syscall! */ +#define __NR_wait4 (__NR_SYSCALL_BASE+114) +#define __NR_swapoff (__NR_SYSCALL_BASE+115) +#define __NR_sysinfo (__NR_SYSCALL_BASE+116) +#define __NR_ipc (__NR_SYSCALL_BASE+117) +#define __NR_fsync (__NR_SYSCALL_BASE+118) +#define __NR_sigreturn (__NR_SYSCALL_BASE+119) +#define __NR_clone (__NR_SYSCALL_BASE+120) +#define __NR_setdomainname (__NR_SYSCALL_BASE+121) +#define __NR_uname (__NR_SYSCALL_BASE+122) + /* 123 was sys_modify_ldt */ +#define __NR_adjtimex (__NR_SYSCALL_BASE+124) +#define __NR_mprotect (__NR_SYSCALL_BASE+125) +#define __NR_sigprocmask (__NR_SYSCALL_BASE+126) + /* 127 was sys_create_module */ +#define __NR_init_module (__NR_SYSCALL_BASE+128) +#define __NR_delete_module (__NR_SYSCALL_BASE+129) + /* 130 was sys_get_kernel_syms */ +#define __NR_quotactl (__NR_SYSCALL_BASE+131) +#define __NR_getpgid (__NR_SYSCALL_BASE+132) +#define __NR_fchdir (__NR_SYSCALL_BASE+133) +#define __NR_bdflush (__NR_SYSCALL_BASE+134) +#define __NR_sysfs (__NR_SYSCALL_BASE+135) +#define __NR_personality (__NR_SYSCALL_BASE+136) + /* 137 was sys_afs_syscall */ +#define __NR_setfsuid (__NR_SYSCALL_BASE+138) +#define __NR_setfsgid (__NR_SYSCALL_BASE+139) +#define __NR__llseek (__NR_SYSCALL_BASE+140) +#define __NR_getdents (__NR_SYSCALL_BASE+141) +#define __NR__newselect (__NR_SYSCALL_BASE+142) +#define __NR_flock (__NR_SYSCALL_BASE+143) +#define __NR_msync (__NR_SYSCALL_BASE+144) +#define __NR_readv (__NR_SYSCALL_BASE+145) +#define __NR_writev (__NR_SYSCALL_BASE+146) +#define __NR_getsid (__NR_SYSCALL_BASE+147) +#define __NR_fdatasync (__NR_SYSCALL_BASE+148) +#define __NR__sysctl (__NR_SYSCALL_BASE+149) +#define __NR_mlock (__NR_SYSCALL_BASE+150) +#define __NR_munlock (__NR_SYSCALL_BASE+151) +#define __NR_mlockall (__NR_SYSCALL_BASE+152) +#define __NR_munlockall (__NR_SYSCALL_BASE+153) +#define __NR_sched_setparam (__NR_SYSCALL_BASE+154) +#define __NR_sched_getparam (__NR_SYSCALL_BASE+155) +#define __NR_sched_setscheduler (__NR_SYSCALL_BASE+156) +#define __NR_sched_getscheduler (__NR_SYSCALL_BASE+157) +#define __NR_sched_yield (__NR_SYSCALL_BASE+158) +#define __NR_sched_get_priority_max (__NR_SYSCALL_BASE+159) +#define __NR_sched_get_priority_min (__NR_SYSCALL_BASE+160) +#define __NR_sched_rr_get_interval (__NR_SYSCALL_BASE+161) +#define __NR_nanosleep (__NR_SYSCALL_BASE+162) +#define __NR_mremap (__NR_SYSCALL_BASE+163) +#define __NR_setresuid (__NR_SYSCALL_BASE+164) +#define __NR_getresuid (__NR_SYSCALL_BASE+165) + /* 166 was sys_vm86 */ + /* 167 was sys_query_module */ +#define __NR_poll (__NR_SYSCALL_BASE+168) +#define __NR_nfsservctl (__NR_SYSCALL_BASE+169) +#define __NR_setresgid (__NR_SYSCALL_BASE+170) +#define __NR_getresgid (__NR_SYSCALL_BASE+171) +#define __NR_prctl (__NR_SYSCALL_BASE+172) +#define __NR_rt_sigreturn (__NR_SYSCALL_BASE+173) +#define __NR_rt_sigaction (__NR_SYSCALL_BASE+174) +#define __NR_rt_sigprocmask (__NR_SYSCALL_BASE+175) +#define __NR_rt_sigpending (__NR_SYSCALL_BASE+176) +#define __NR_rt_sigtimedwait (__NR_SYSCALL_BASE+177) +#define __NR_rt_sigqueueinfo (__NR_SYSCALL_BASE+178) +#define __NR_rt_sigsuspend (__NR_SYSCALL_BASE+179) +#define __NR_pread64 (__NR_SYSCALL_BASE+180) +#define __NR_pwrite64 (__NR_SYSCALL_BASE+181) +#define __NR_chown (__NR_SYSCALL_BASE+182) +#define __NR_getcwd (__NR_SYSCALL_BASE+183) +#define __NR_capget (__NR_SYSCALL_BASE+184) +#define __NR_capset (__NR_SYSCALL_BASE+185) +#define __NR_sigaltstack (__NR_SYSCALL_BASE+186) +#define __NR_sendfile (__NR_SYSCALL_BASE+187) + /* 188 reserved */ + /* 189 reserved */ +#define __NR_vfork (__NR_SYSCALL_BASE+190) +#define __NR_ugetrlimit (__NR_SYSCALL_BASE+191) /* SuS compliant getrlimit */ +#define __NR_mmap2 (__NR_SYSCALL_BASE+192) +#define __NR_truncate64 (__NR_SYSCALL_BASE+193) +#define __NR_ftruncate64 (__NR_SYSCALL_BASE+194) +#define __NR_stat64 (__NR_SYSCALL_BASE+195) +#define __NR_lstat64 (__NR_SYSCALL_BASE+196) +#define __NR_fstat64 (__NR_SYSCALL_BASE+197) +#define __NR_lchown32 (__NR_SYSCALL_BASE+198) +#define __NR_getuid32 (__NR_SYSCALL_BASE+199) +#define __NR_getgid32 (__NR_SYSCALL_BASE+200) +#define __NR_geteuid32 (__NR_SYSCALL_BASE+201) +#define __NR_getegid32 (__NR_SYSCALL_BASE+202) +#define __NR_setreuid32 (__NR_SYSCALL_BASE+203) +#define __NR_setregid32 (__NR_SYSCALL_BASE+204) +#define __NR_getgroups32 (__NR_SYSCALL_BASE+205) +#define __NR_setgroups32 (__NR_SYSCALL_BASE+206) +#define __NR_fchown32 (__NR_SYSCALL_BASE+207) +#define __NR_setresuid32 (__NR_SYSCALL_BASE+208) +#define __NR_getresuid32 (__NR_SYSCALL_BASE+209) +#define __NR_setresgid32 (__NR_SYSCALL_BASE+210) +#define __NR_getresgid32 (__NR_SYSCALL_BASE+211) +#define __NR_chown32 (__NR_SYSCALL_BASE+212) +#define __NR_setuid32 (__NR_SYSCALL_BASE+213) +#define __NR_setgid32 (__NR_SYSCALL_BASE+214) +#define __NR_setfsuid32 (__NR_SYSCALL_BASE+215) +#define __NR_setfsgid32 (__NR_SYSCALL_BASE+216) +#define __NR_getdents64 (__NR_SYSCALL_BASE+217) +#define __NR_pivot_root (__NR_SYSCALL_BASE+218) +#define __NR_mincore (__NR_SYSCALL_BASE+219) +#define __NR_madvise (__NR_SYSCALL_BASE+220) +#define __NR_fcntl64 (__NR_SYSCALL_BASE+221) + /* 222 for tux */ + /* 223 is unused */ +#define __NR_gettid (__NR_SYSCALL_BASE+224) +#define __NR_readahead (__NR_SYSCALL_BASE+225) +#define __NR_setxattr (__NR_SYSCALL_BASE+226) +#define __NR_lsetxattr (__NR_SYSCALL_BASE+227) +#define __NR_fsetxattr (__NR_SYSCALL_BASE+228) +#define __NR_getxattr (__NR_SYSCALL_BASE+229) +#define __NR_lgetxattr (__NR_SYSCALL_BASE+230) +#define __NR_fgetxattr (__NR_SYSCALL_BASE+231) +#define __NR_listxattr (__NR_SYSCALL_BASE+232) +#define __NR_llistxattr (__NR_SYSCALL_BASE+233) +#define __NR_flistxattr (__NR_SYSCALL_BASE+234) +#define __NR_removexattr (__NR_SYSCALL_BASE+235) +#define __NR_lremovexattr (__NR_SYSCALL_BASE+236) +#define __NR_fremovexattr (__NR_SYSCALL_BASE+237) +#define __NR_tkill (__NR_SYSCALL_BASE+238) +#define __NR_sendfile64 (__NR_SYSCALL_BASE+239) +#define __NR_futex (__NR_SYSCALL_BASE+240) +#define __NR_sched_setaffinity (__NR_SYSCALL_BASE+241) +#define __NR_sched_getaffinity (__NR_SYSCALL_BASE+242) +#define __NR_io_setup (__NR_SYSCALL_BASE+243) +#define __NR_io_destroy (__NR_SYSCALL_BASE+244) +#define __NR_io_getevents (__NR_SYSCALL_BASE+245) +#define __NR_io_submit (__NR_SYSCALL_BASE+246) +#define __NR_io_cancel (__NR_SYSCALL_BASE+247) +#define __NR_exit_group (__NR_SYSCALL_BASE+248) +#define __NR_lookup_dcookie (__NR_SYSCALL_BASE+249) +#define __NR_epoll_create (__NR_SYSCALL_BASE+250) +#define __NR_epoll_ctl (__NR_SYSCALL_BASE+251) +#define __NR_epoll_wait (__NR_SYSCALL_BASE+252) +#define __NR_remap_file_pages (__NR_SYSCALL_BASE+253) + /* 254 for set_thread_area */ + /* 255 for get_thread_area */ + /* 256 for set_tid_address */ +#define __NR_timer_create (__NR_SYSCALL_BASE+257) +#define __NR_timer_settime (__NR_SYSCALL_BASE+258) +#define __NR_timer_gettime (__NR_SYSCALL_BASE+259) +#define __NR_timer_getoverrun (__NR_SYSCALL_BASE+260) +#define __NR_timer_delete (__NR_SYSCALL_BASE+261) +#define __NR_clock_settime (__NR_SYSCALL_BASE+262) +#define __NR_clock_gettime (__NR_SYSCALL_BASE+263) +#define __NR_clock_getres (__NR_SYSCALL_BASE+264) +#define __NR_clock_nanosleep (__NR_SYSCALL_BASE+265) +#define __NR_statfs64 (__NR_SYSCALL_BASE+266) +#define __NR_fstatfs64 (__NR_SYSCALL_BASE+267) +#define __NR_tgkill (__NR_SYSCALL_BASE+268) +#define __NR_utimes (__NR_SYSCALL_BASE+269) +#define __NR_fadvise64_64 (__NR_SYSCALL_BASE+270) +#define __NR_pciconfig_iobase (__NR_SYSCALL_BASE+271) +#define __NR_pciconfig_read (__NR_SYSCALL_BASE+272) +#define __NR_pciconfig_write (__NR_SYSCALL_BASE+273) +#define __NR_mq_open (__NR_SYSCALL_BASE+274) +#define __NR_mq_unlink (__NR_SYSCALL_BASE+275) +#define __NR_mq_timedsend (__NR_SYSCALL_BASE+276) +#define __NR_mq_timedreceive (__NR_SYSCALL_BASE+277) +#define __NR_mq_notify (__NR_SYSCALL_BASE+278) +#define __NR_mq_getsetattr (__NR_SYSCALL_BASE+279) +#define __NR_waitid (__NR_SYSCALL_BASE+280) + +/* + * The following SWIs are ARM private. FIXME - make appropriate for arm26 + */ +#define __ARM_NR_BASE (__NR_SYSCALL_BASE+0x0f0000) +#define __ARM_NR_breakpoint (__ARM_NR_BASE+1) +#define __ARM_NR_cacheflush (__ARM_NR_BASE+2) +#define __ARM_NR_usr26 (__ARM_NR_BASE+3) + +#define __sys2(x) #x +#define __sys1(x) __sys2(x) + +#ifndef __syscall +#define __syscall(name) "swi\t" __sys1(__NR_##name) "" +#endif + +#define __syscall_return(type, res) \ +do { \ + if ((unsigned long)(res) >= (unsigned long)(-125)) { \ + errno = -(res); \ + res = -1; \ + } \ + return (type) (res); \ +} while (0) + +#define _syscall0(type,name) \ +type name(void) { \ + register long __res_r0 __asm__("r0"); \ + long __res; \ + __asm__ __volatile__ ( \ + __syscall(name) \ + : "=r" (__res_r0) \ + : \ + : "lr"); \ + __res = __res_r0; \ + __syscall_return(type,__res); \ +} + +#define _syscall1(type,name,type1,arg1) \ +type name(type1 arg1) { \ + register long __r0 __asm__("r0") = (long)arg1; \ + register long __res_r0 __asm__("r0"); \ + long __res; \ + __asm__ __volatile__ ( \ + __syscall(name) \ + : "=r" (__res_r0) \ + : "r" (__r0) \ + : "lr"); \ + __res = __res_r0; \ + __syscall_return(type,__res); \ +} + +#define _syscall2(type,name,type1,arg1,type2,arg2) \ +type name(type1 arg1,type2 arg2) { \ + register long __r0 __asm__("r0") = (long)arg1; \ + register long __r1 __asm__("r1") = (long)arg2; \ + register long __res_r0 __asm__("r0"); \ + long __res; \ + __asm__ __volatile__ ( \ + __syscall(name) \ + : "=r" (__res_r0) \ + : "r" (__r0),"r" (__r1) \ + : "lr"); \ + __res = __res_r0; \ + __syscall_return(type,__res); \ +} + + +#define _syscall3(type,name,type1,arg1,type2,arg2,type3,arg3) \ +type name(type1 arg1,type2 arg2,type3 arg3) { \ + register long __r0 __asm__("r0") = (long)arg1; \ + register long __r1 __asm__("r1") = (long)arg2; \ + register long __r2 __asm__("r2") = (long)arg3; \ + register long __res_r0 __asm__("r0"); \ + long __res; \ + __asm__ __volatile__ ( \ + __syscall(name) \ + : "=r" (__res_r0) \ + : "r" (__r0),"r" (__r1),"r" (__r2) \ + : "lr"); \ + __res = __res_r0; \ + __syscall_return(type,__res); \ +} + + +#define _syscall4(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4)\ +type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4) { \ + register long __r0 __asm__("r0") = (long)arg1; \ + register long __r1 __asm__("r1") = (long)arg2; \ + register long __r2 __asm__("r2") = (long)arg3; \ + register long __r3 __asm__("r3") = (long)arg4; \ + register long __res_r0 __asm__("r0"); \ + long __res; \ + __asm__ __volatile__ ( \ + __syscall(name) \ + : "=r" (__res_r0) \ + : "r" (__r0),"r" (__r1),"r" (__r2),"r" (__r3) \ + : "lr"); \ + __res = __res_r0; \ + __syscall_return(type,__res); \ +} + + +#define _syscall5(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4,type5,arg5) \ +type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4, type5 arg5) { \ + register long __r0 __asm__("r0") = (long)arg1; \ + register long __r1 __asm__("r1") = (long)arg2; \ + register long __r2 __asm__("r2") = (long)arg3; \ + register long __r3 __asm__("r3") = (long)arg4; \ + register long __r4 __asm__("r4") = (long)arg5; \ + register long __res_r0 __asm__("r0"); \ + long __res; \ + __asm__ __volatile__ ( \ + __syscall(name) \ + : "=r" (__res_r0) \ + : "r" (__r0),"r" (__r1),"r" (__r2),"r" (__r3),"r" (__r4) \ + : "lr"); \ + __res = __res_r0; \ + __syscall_return(type,__res); \ +} + +#define _syscall6(type,name,type1,arg1,type2,arg2,type3,arg3,type4,arg4,type5,arg5,type6,arg6) \ +type name(type1 arg1, type2 arg2, type3 arg3, type4 arg4, type5 arg5, type6 arg6) { \ + register long __r0 __asm__("r0") = (long)arg1; \ + register long __r1 __asm__("r1") = (long)arg2; \ + register long __r2 __asm__("r2") = (long)arg3; \ + register long __r3 __asm__("r3") = (long)arg4; \ + register long __r4 __asm__("r4") = (long)arg5; \ + register long __r5 __asm__("r5") = (long)arg6; \ + register long __res_r0 __asm__("r0"); \ + long __res; \ + __asm__ __volatile__ ( \ + __syscall(name) \ + : "=r" (__res_r0) \ + : "r" (__r0),"r" (__r1),"r" (__r2),"r" (__r3), "r" (__r4),"r" (__r5) \ + : "lr"); \ + __res = __res_r0; \ + __syscall_return(type,__res); \ +} + +#ifdef __KERNEL__ +#define __ARCH_WANT_IPC_PARSE_VERSION +#define __ARCH_WANT_OLD_READDIR +#define __ARCH_WANT_STAT64 +#define __ARCH_WANT_SYS_ALARM +#define __ARCH_WANT_SYS_GETHOSTNAME +#define __ARCH_WANT_SYS_PAUSE +#define __ARCH_WANT_SYS_TIME +#define __ARCH_WANT_SYS_UTIME +#define __ARCH_WANT_SYS_SOCKETCALL +#define __ARCH_WANT_SYS_FADVISE64 +#define __ARCH_WANT_SYS_GETPGRP +#define __ARCH_WANT_SYS_LLSEEK +#define __ARCH_WANT_SYS_NICE +#define __ARCH_WANT_SYS_OLD_GETRLIMIT +#define __ARCH_WANT_SYS_OLDUMOUNT +#define __ARCH_WANT_SYS_SIGPENDING +#define __ARCH_WANT_SYS_SIGPROCMASK +#define __ARCH_WANT_SYS_RT_SIGACTION +#endif + +#ifdef __KERNEL_SYSCALLS__ + +#include +#include +#include + +extern long execve(const char *file, char **argv, char **envp); + +struct pt_regs; +asmlinkage int sys_execve(char *filenamei, char **argv, char **envp, + struct pt_regs *regs); +asmlinkage int sys_clone(unsigned long clone_flags, unsigned long newsp, + struct pt_regs *regs); +asmlinkage int sys_fork(struct pt_regs *regs); +asmlinkage int sys_vfork(struct pt_regs *regs); +asmlinkage int sys_pipe(unsigned long *fildes); +asmlinkage int sys_ptrace(long request, long pid, long addr, long data); +struct sigaction; +asmlinkage long sys_rt_sigaction(int sig, + const struct sigaction __user *act, + struct sigaction __user *oact, + size_t sigsetsize); + +#endif + +/* + * "Conditional" syscalls + * + * What we want is __attribute__((weak,alias("sys_ni_syscall"))), + * but it doesn't work on all toolchains, so we just do it by hand + */ +#define cond_syscall(x) asm(".weak\t" #x "\n\t.set\t" #x ",sys_ni_syscall") + +#endif /* __ASM_ARM_UNISTD_H */ diff --git a/include/asm-arm26/user.h b/include/asm-arm26/user.h new file mode 100644 index 0000000..3e8b0f8 --- /dev/null +++ b/include/asm-arm26/user.h @@ -0,0 +1,84 @@ +#ifndef _ARM_USER_H +#define _ARM_USER_H + +#include +#include +/* Core file format: The core file is written in such a way that gdb + can understand it and provide useful information to the user (under + linux we use the 'trad-core' bfd). There are quite a number of + obstacles to being able to view the contents of the floating point + registers, and until these are solved you will not be able to view the + contents of them. Actually, you can read in the core file and look at + the contents of the user struct to find out what the floating point + registers contain. + The actual file contents are as follows: + UPAGE: 1 page consisting of a user struct that tells gdb what is present + in the file. Directly after this is a copy of the task_struct, which + is currently not used by gdb, but it may come in useful at some point. + All of the registers are stored as part of the upage. The upage should + always be only one page. + DATA: The data area is stored. We use current->end_text to + current->brk to pick up all of the user variables, plus any memory + that may have been malloced. No attempt is made to determine if a page + is demand-zero or if a page is totally unused, we just cover the entire + range. All of the addresses are rounded in such a way that an integral + number of pages is written. + STACK: We need the stack information in order to get a meaningful + backtrace. We need to write the data from (esp) to + current->start_stack, so we round each of these off in order to be able + to write an integer number of pages. + The minimum core file size is 3 pages, or 12288 bytes. +*/ + +struct user_fp { + struct fp_reg { + unsigned int sign1:1; + unsigned int unused:15; + unsigned int sign2:1; + unsigned int exponent:14; + unsigned int j:1; + unsigned int mantissa1:31; + unsigned int mantissa0:32; + } fpregs[8]; + unsigned int fpsr:32; + unsigned int fpcr:32; + unsigned char ftype[8]; + unsigned int init_flag; +}; + +/* When the kernel dumps core, it starts by dumping the user struct - + this will be used by gdb to figure out where the data and stack segments + are within the file, and what virtual addresses to use. */ +struct user{ +/* We start with the registers, to mimic the way that "memory" is returned + from the ptrace(3,...) function. */ + struct pt_regs regs; /* Where the registers are actually stored */ +/* ptrace does not yet supply these. Someday.... */ + int u_fpvalid; /* True if math co-processor being used. */ + /* for this mess. Not yet used. */ +/* The rest of this junk is to help gdb figure out what goes where */ + unsigned long int u_tsize; /* Text segment size (pages). */ + unsigned long int u_dsize; /* Data segment size (pages). */ + unsigned long int u_ssize; /* Stack segment size (pages). */ + unsigned long start_code; /* Starting virtual address of text. */ + unsigned long start_stack; /* Starting virtual address of stack area. + This is actually the bottom of the stack, + the top of the stack is always found in the + esp register. */ + long int signal; /* Signal that caused the core dump. */ + int reserved; /* No longer used */ + struct pt_regs * u_ar0; /* Used by gdb to help find the values for */ + /* the registers. */ + unsigned long magic; /* To uniquely identify a core file */ + char u_comm[32]; /* User command that was responsible */ + int u_debugreg[8]; + struct user_fp u_fp; /* FP state */ + struct user_fp_struct * u_fp0;/* Used by gdb to help find the values for */ + /* the FP registers. */ +}; +#define NBPG PAGE_SIZE +#define UPAGES 1 +#define HOST_TEXT_START_ADDR (u.start_code) +#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG) + +#endif /* _ARM_USER_H */ diff --git a/include/asm-arm26/xor.h b/include/asm-arm26/xor.h new file mode 100644 index 0000000..e7c4cf5 --- /dev/null +++ b/include/asm-arm26/xor.h @@ -0,0 +1,141 @@ +/* + * linux/include/asm-arm/xor.h + * + * Copyright (C) 2001 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include + +#define __XOR(a1, a2) a1 ^= a2 + +#define GET_BLOCK_2(dst) \ + __asm__("ldmia %0, {%1, %2}" \ + : "=r" (dst), "=r" (a1), "=r" (a2) \ + : "0" (dst)) + +#define GET_BLOCK_4(dst) \ + __asm__("ldmia %0, {%1, %2, %3, %4}" \ + : "=r" (dst), "=r" (a1), "=r" (a2), "=r" (a3), "=r" (a4) \ + : "0" (dst)) + +#define XOR_BLOCK_2(src) \ + __asm__("ldmia %0!, {%1, %2}" \ + : "=r" (src), "=r" (b1), "=r" (b2) \ + : "0" (src)); \ + __XOR(a1, b1); __XOR(a2, b2); + +#define XOR_BLOCK_4(src) \ + __asm__("ldmia %0!, {%1, %2, %3, %4}" \ + : "=r" (src), "=r" (b1), "=r" (b2), "=r" (b3), "=r" (b4) \ + : "0" (src)); \ + __XOR(a1, b1); __XOR(a2, b2); __XOR(a3, b3); __XOR(a4, b4) + +#define PUT_BLOCK_2(dst) \ + __asm__ __volatile__("stmia %0!, {%2, %3}" \ + : "=r" (dst) \ + : "0" (dst), "r" (a1), "r" (a2)) + +#define PUT_BLOCK_4(dst) \ + __asm__ __volatile__("stmia %0!, {%2, %3, %4, %5}" \ + : "=r" (dst) \ + : "0" (dst), "r" (a1), "r" (a2), "r" (a3), "r" (a4)) + +static void +xor_arm4regs_2(unsigned long bytes, unsigned long *p1, unsigned long *p2) +{ + unsigned int lines = bytes / sizeof(unsigned long) / 4; + register unsigned int a1 __asm__("r4"); + register unsigned int a2 __asm__("r5"); + register unsigned int a3 __asm__("r6"); + register unsigned int a4 __asm__("r7"); + register unsigned int b1 __asm__("r8"); + register unsigned int b2 __asm__("r9"); + register unsigned int b3 __asm__("ip"); + register unsigned int b4 __asm__("lr"); + + do { + GET_BLOCK_4(p1); + XOR_BLOCK_4(p2); + PUT_BLOCK_4(p1); + } while (--lines); +} + +static void +xor_arm4regs_3(unsigned long bytes, unsigned long *p1, unsigned long *p2, + unsigned long *p3) +{ + unsigned int lines = bytes / sizeof(unsigned long) / 4; + register unsigned int a1 __asm__("r4"); + register unsigned int a2 __asm__("r5"); + register unsigned int a3 __asm__("r6"); + register unsigned int a4 __asm__("r7"); + register unsigned int b1 __asm__("r8"); + register unsigned int b2 __asm__("r9"); + register unsigned int b3 __asm__("ip"); + register unsigned int b4 __asm__("lr"); + + do { + GET_BLOCK_4(p1); + XOR_BLOCK_4(p2); + XOR_BLOCK_4(p3); + PUT_BLOCK_4(p1); + } while (--lines); +} + +static void +xor_arm4regs_4(unsigned long bytes, unsigned long *p1, unsigned long *p2, + unsigned long *p3, unsigned long *p4) +{ + unsigned int lines = bytes / sizeof(unsigned long) / 2; + register unsigned int a1 __asm__("r8"); + register unsigned int a2 __asm__("r9"); + register unsigned int b1 __asm__("ip"); + register unsigned int b2 __asm__("lr"); + + do { + GET_BLOCK_2(p1); + XOR_BLOCK_2(p2); + XOR_BLOCK_2(p3); + XOR_BLOCK_2(p4); + PUT_BLOCK_2(p1); + } while (--lines); +} + +static void +xor_arm4regs_5(unsigned long bytes, unsigned long *p1, unsigned long *p2, + unsigned long *p3, unsigned long *p4, unsigned long *p5) +{ + unsigned int lines = bytes / sizeof(unsigned long) / 2; + register unsigned int a1 __asm__("r8"); + register unsigned int a2 __asm__("r9"); + register unsigned int b1 __asm__("ip"); + register unsigned int b2 __asm__("lr"); + + do { + GET_BLOCK_2(p1); + XOR_BLOCK_2(p2); + XOR_BLOCK_2(p3); + XOR_BLOCK_2(p4); + XOR_BLOCK_2(p5); + PUT_BLOCK_2(p1); + } while (--lines); +} + +static struct xor_block_template xor_block_arm4regs = { + .name = "arm4regs", + .do_2 = xor_arm4regs_2, + .do_3 = xor_arm4regs_3, + .do_4 = xor_arm4regs_4, + .do_5 = xor_arm4regs_5, +}; + +#undef XOR_TRY_TEMPLATES +#define XOR_TRY_TEMPLATES \ + do { \ + xor_speed(&xor_block_arm4regs); \ + xor_speed(&xor_block_8regs); \ + xor_speed(&xor_block_32regs); \ + } while (0) -- cgit v1.1