From 3429769bc67c7a48b3c01b2452b32171b3450202 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 10 Sep 2010 01:58:10 +0000 Subject: ppp: potential NULL dereference in ppp_mp_explode() Smatch complains because we check whether "pch->chan" is NULL and then dereference it unconditionally on the next line. Partly the reason this bug was introduced is because code was too complicated. I've simplified it a little. Signed-off-by: Dan Carpenter Signed-off-by: David S. Miller --- drivers/net/ppp_generic.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c index 6695a51..736b917 100644 --- a/drivers/net/ppp_generic.c +++ b/drivers/net/ppp_generic.c @@ -1314,8 +1314,13 @@ static int ppp_mp_explode(struct ppp *ppp, struct sk_buff *skb) hdrlen = (ppp->flags & SC_MP_XSHORTSEQ)? MPHDRLEN_SSN: MPHDRLEN; i = 0; list_for_each_entry(pch, &ppp->channels, clist) { - navail += pch->avail = (pch->chan != NULL); - pch->speed = pch->chan->speed; + if (pch->chan) { + pch->avail = 1; + navail++; + pch->speed = pch->chan->speed; + } else { + pch->avail = 0; + } if (pch->avail) { if (skb_queue_empty(&pch->file.xq) || !pch->had_frag) { -- cgit v1.1 From ee05d6939ed17b55e9c2466af32c208e0d547eb8 Mon Sep 17 00:00:00 2001 From: "Michael S. Tsirkin" Date: Tue, 14 Sep 2010 15:15:52 +0200 Subject: vhost-net: fix range checking in mrg bufs case In mergeable buffer case, we use headcount, log_num and seg as indexes in same-size arrays, and we know that headcount <= seg and log_num equals either 0 or seg. Therefore, the right thing to do is range-check seg, not headcount as we do now: these will be different if guest chains s/g descriptors (this does not happen now, but we can not trust the guest). Long term, we should add BUG_ON checks to verify two other indexes are what we think they should be. Reported-by: Jason Wang Signed-off-by: Michael S. Tsirkin --- drivers/vhost/net.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/vhost/net.c b/drivers/vhost/net.c index 29e850a..7c80082 100644 --- a/drivers/vhost/net.c +++ b/drivers/vhost/net.c @@ -243,7 +243,7 @@ static int get_rx_bufs(struct vhost_virtqueue *vq, int r, nlogs = 0; while (datalen > 0) { - if (unlikely(headcount >= VHOST_NET_MAX_SG)) { + if (unlikely(seg >= VHOST_NET_MAX_SG)) { r = -ENOBUFS; goto err; } -- cgit v1.1 From ab12811c89e88f2e66746790b1fe4469ccb7bdd9 Mon Sep 17 00:00:00 2001 From: Andy Gospodarek Date: Fri, 10 Sep 2010 11:43:20 +0000 Subject: bonding: correctly process non-linear skbs It was recently brought to my attention that 802.3ad mode bonds would no longer form when using some network hardware after a driver update. After snooping around I realized that the particular hardware was using page-based skbs and found that skb->data did not contain a valid LACPDU as it was not stored there. That explained the inability to form an 802.3ad-based bond. For balance-alb mode bonds this was also an issue as ARPs would not be properly processed. This patch fixes the issue in my tests and should be applied to 2.6.36 and as far back as anyone cares to add it to stable. Thanks to Alexander Duyck and Jesse Brandeburg for the suggestions on this one. Signed-off-by: Andy Gospodarek CC: Alexander Duyck CC: Jesse Brandeburg CC: stable@kerne.org Signed-off-by: Jay Vosburgh Signed-off-by: David S. Miller --- drivers/net/bonding/bond_3ad.c | 3 +++ drivers/net/bonding/bond_alb.c | 3 +++ 2 files changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c index 822f586..0ddf4c6 100644 --- a/drivers/net/bonding/bond_3ad.c +++ b/drivers/net/bonding/bond_3ad.c @@ -2466,6 +2466,9 @@ int bond_3ad_lacpdu_recv(struct sk_buff *skb, struct net_device *dev, struct pac if (!(dev->flags & IFF_MASTER)) goto out; + if (!pskb_may_pull(skb, sizeof(struct lacpdu))) + goto out; + read_lock(&bond->lock); slave = bond_get_slave_by_dev((struct bonding *)netdev_priv(dev), orig_dev); diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c index c746b33..26bb118 100644 --- a/drivers/net/bonding/bond_alb.c +++ b/drivers/net/bonding/bond_alb.c @@ -362,6 +362,9 @@ static int rlb_arp_recv(struct sk_buff *skb, struct net_device *bond_dev, struct goto out; } + if (!pskb_may_pull(skb, arp_hdr_len(bond_dev))) + goto out; + if (skb->len < sizeof(struct arp_pkt)) { pr_debug("Packet is too small to be an ARP\n"); goto out; -- cgit v1.1 From fddd91016d16277a32727ad272cf2edd3d309c90 Mon Sep 17 00:00:00 2001 From: Simon Guinot Date: Mon, 13 Sep 2010 22:12:01 +0000 Subject: phylib: fix PAL state machine restart on resume On resume, before starting the PAL state machine, check if the adjust_link() method is well supplied. If not, this would lead to a NULL pointer dereference in the phy_state_machine() function. This scenario can happen if the Ethernet driver call manually the PHY functions instead of using the PAL state machine. The mv643xx_eth driver is a such example. Signed-off-by: Simon Guinot Signed-off-by: David S. Miller --- drivers/net/phy/mdio_bus.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index 6a6b819..6c58da2 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -308,7 +308,7 @@ static int mdio_bus_suspend(struct device *dev) * may call phy routines that try to grab the same lock, and that may * lead to a deadlock. */ - if (phydev->attached_dev) + if (phydev->attached_dev && phydev->adjust_link) phy_stop_machine(phydev); if (!mdio_bus_phy_may_suspend(phydev)) @@ -331,7 +331,7 @@ static int mdio_bus_resume(struct device *dev) return ret; no_resume: - if (phydev->attached_dev) + if (phydev->attached_dev && phydev->adjust_link) phy_start_machine(phydev, NULL); return 0; -- cgit v1.1 From 84176b7b56704580e008e6cb820dd4ccf622a1fd Mon Sep 17 00:00:00 2001 From: Denis Kirjanov Date: Wed, 15 Sep 2010 00:58:46 +0000 Subject: 3c59x: Remove atomic context inside vortex_{set|get}_wol There is no need to use spinlocks in vortex_{set|get}_wol. This also fixes a bug: [ 254.214993] 3c59x 0000:00:0d.0: PME# enabled [ 254.215021] BUG: sleeping function called from invalid context at kernel/mutex.c:94 [ 254.215030] in_atomic(): 0, irqs_disabled(): 1, pid: 4875, name: ethtool [ 254.215042] Pid: 4875, comm: ethtool Tainted: G W 2.6.36-rc3+ #7 [ 254.215049] Call Trace: [ 254.215050] [] __might_sleep+0xb1/0xb6 [ 254.215050] [] mutex_lock+0x17/0x30 [ 254.215050] [] acpi_enable_wakeup_device_power+0x2b/0xb1 [ 254.215050] [] acpi_pm_device_sleep_wake+0x42/0x7f [ 254.215050] [] acpi_pci_sleep_wake+0x5d/0x63 [ 254.215050] [] platform_pci_sleep_wake+0x1d/0x20 [ 254.215050] [] __pci_enable_wake+0x90/0xd0 [ 254.215050] [] acpi_set_WOL+0x8e/0xf5 [3c59x] [ 254.215050] [] vortex_set_wol+0x4e/0x5e [3c59x] [ 254.215050] [] dev_ethtool+0x1cf/0xb61 [ 254.215050] [] ? debug_mutex_free_waiter+0x45/0x4a [ 254.215050] [] ? __mutex_lock_common+0x204/0x20e [ 254.215050] [] ? __mutex_lock_slowpath+0x12/0x15 [ 254.215050] [] ? mutex_lock+0x23/0x30 [ 254.215050] [] dev_ioctl+0x42c/0x533 [ 254.215050] [] ? _cond_resched+0x8/0x1c [ 254.215050] [] ? lock_page+0x1c/0x30 [ 254.215050] [] ? page_address+0x15/0x7c [ 254.215050] [] ? filemap_fault+0x187/0x2c4 [ 254.215050] [] sock_ioctl+0x1d4/0x1e0 [ 254.215050] [] ? sock_ioctl+0x0/0x1e0 [ 254.215050] [] vfs_ioctl+0x19/0x33 [ 254.215050] [] do_vfs_ioctl+0x424/0x46f [ 254.215050] [] ? selinux_file_ioctl+0x3c/0x40 [ 254.215050] [] sys_ioctl+0x40/0x5a [ 254.215050] [] sysenter_do_call+0x12/0x22 vortex_set_wol protected with a spinlock, but nested acpi_set_WOL acquires a mutex inside atomic context. Ethtool operations are already serialized by RTNL mutex, so it is safe to drop the locks. Signed-off-by: Denis Kirjanov Signed-off-by: David S. Miller --- drivers/net/3c59x.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c index 85671ad..fa42103 100644 --- a/drivers/net/3c59x.c +++ b/drivers/net/3c59x.c @@ -635,6 +635,9 @@ struct vortex_private { must_free_region:1, /* Flag: if zero, Cardbus owns the I/O region */ large_frames:1, /* accept large frames */ handling_irq:1; /* private in_irq indicator */ + /* {get|set}_wol operations are already serialized by rtnl. + * no additional locking is required for the enable_wol and acpi_set_WOL() + */ int drv_flags; u16 status_enable; u16 intr_enable; @@ -2939,13 +2942,11 @@ static void vortex_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol) { struct vortex_private *vp = netdev_priv(dev); - spin_lock_irq(&vp->lock); wol->supported = WAKE_MAGIC; wol->wolopts = 0; if (vp->enable_wol) wol->wolopts |= WAKE_MAGIC; - spin_unlock_irq(&vp->lock); } static int vortex_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) @@ -2954,13 +2955,11 @@ static int vortex_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol) if (wol->wolopts & ~WAKE_MAGIC) return -EINVAL; - spin_lock_irq(&vp->lock); if (wol->wolopts & WAKE_MAGIC) vp->enable_wol = 1; else vp->enable_wol = 0; acpi_set_WOL(dev); - spin_unlock_irq(&vp->lock); return 0; } -- cgit v1.1 From 801e147cde02f04b5c2f42764cd43a89fc7400a2 Mon Sep 17 00:00:00 2001 From: Matthew Garrett Date: Tue, 14 Sep 2010 11:57:11 +0000 Subject: r8169: Handle rxfifo errors on 8168 chips The Thinkpad X100e seems to have some odd behaviour when the display is powered off - the onboard r8169 starts generating rxfifo overflow errors. The root cause of this has not yet been identified and may well be a hardware design bug on the platform, but r8169 should be more resiliant to this. This patch enables the rxfifo interrupt on 8168 devices and removes the MAC version check in the interrupt handler, and the machine no longer crashes when under network load while the screen turns off. Signed-off-by: Matthew Garrett Acked-by: Francois Romieu Signed-off-by: David S. Miller --- drivers/net/r8169.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index 078bbf4..a0da4a1 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -2934,7 +2934,7 @@ static const struct rtl_cfg_info { .hw_start = rtl_hw_start_8168, .region = 2, .align = 8, - .intr_event = SYSErr | LinkChg | RxOverflow | + .intr_event = SYSErr | RxFIFOOver | LinkChg | RxOverflow | TxErr | TxOK | RxOK | RxErr, .napi_event = TxErr | TxOK | RxOK | RxOverflow, .features = RTL_FEATURE_GMII | RTL_FEATURE_MSI, @@ -4625,8 +4625,7 @@ static irqreturn_t rtl8169_interrupt(int irq, void *dev_instance) } /* Work around for rx fifo overflow */ - if (unlikely(status & RxFIFOOver) && - (tp->mac_version == RTL_GIGA_MAC_VER_11)) { + if (unlikely(status & RxFIFOOver)) { netif_stop_queue(dev); rtl8169_tx_timeout(dev); break; -- cgit v1.1 From 7011e660938fc44ed86319c18a5954e95a82ab3e Mon Sep 17 00:00:00 2001 From: Dan Rosenberg Date: Wed, 15 Sep 2010 11:43:28 +0000 Subject: drivers/net/usb/hso.c: prevent reading uninitialized memory Fixed formatting (tabs and line breaks). The TIOCGICOUNT device ioctl allows unprivileged users to read uninitialized stack memory, because the "reserved" member of the serial_icounter_struct struct declared on the stack in hso_get_count() is not altered or zeroed before being copied back to the user. This patch takes care of it. Signed-off-by: Dan Rosenberg Signed-off-by: David S. Miller --- drivers/net/usb/hso.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c index 6efca66..1cd752f 100644 --- a/drivers/net/usb/hso.c +++ b/drivers/net/usb/hso.c @@ -1652,6 +1652,8 @@ static int hso_get_count(struct hso_serial *serial, struct uart_icount cnow; struct hso_tiocmget *tiocmget = serial->tiocmget; + memset(&icount, 0, sizeof(struct serial_icounter_struct)); + if (!tiocmget) return -ENOENT; spin_lock_irq(&serial->serial_lock); -- cgit v1.1 From 44467187dc22fdd33a1a06ea0ba86ce20be3fe3c Mon Sep 17 00:00:00 2001 From: Dan Rosenberg Date: Wed, 15 Sep 2010 11:43:04 +0000 Subject: drivers/net/eql.c: prevent reading uninitialized stack memory Fixed formatting (tabs and line breaks). The EQL_GETMASTRCFG device ioctl allows unprivileged users to read 16 bytes of uninitialized stack memory, because the "master_name" member of the master_config_t struct declared on the stack in eql_g_master_cfg() is not altered or zeroed before being copied back to the user. This patch takes care of it. Signed-off-by: Dan Rosenberg Signed-off-by: David S. Miller --- drivers/net/eql.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/eql.c b/drivers/net/eql.c index dda2c79..0cb1cf9 100644 --- a/drivers/net/eql.c +++ b/drivers/net/eql.c @@ -555,6 +555,8 @@ static int eql_g_master_cfg(struct net_device *dev, master_config_t __user *mcp) equalizer_t *eql; master_config_t mc; + memset(&mc, 0, sizeof(master_config_t)); + if (eql_is_master(dev)) { eql = netdev_priv(dev); mc.max_slaves = eql->max_slaves; -- cgit v1.1 From 49c37c0334a9b85d30ab3d6b5d1acb05ef2ef6de Mon Sep 17 00:00:00 2001 From: Dan Rosenberg Date: Wed, 15 Sep 2010 11:43:12 +0000 Subject: drivers/net/cxgb3/cxgb3_main.c: prevent reading uninitialized stack memory Fixed formatting (tabs and line breaks). The CHELSIO_GET_QSET_NUM device ioctl allows unprivileged users to read 4 bytes of uninitialized stack memory, because the "addr" member of the ch_reg struct declared on the stack in cxgb_extension_ioctl() is not altered or zeroed before being copied back to the user. This patch takes care of it. Signed-off-by: Dan Rosenberg Signed-off-by: David S. Miller --- drivers/net/cxgb3/cxgb3_main.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/net/cxgb3/cxgb3_main.c b/drivers/net/cxgb3/cxgb3_main.c index ad19585..f208712 100644 --- a/drivers/net/cxgb3/cxgb3_main.c +++ b/drivers/net/cxgb3/cxgb3_main.c @@ -2296,6 +2296,8 @@ static int cxgb_extension_ioctl(struct net_device *dev, void __user *useraddr) case CHELSIO_GET_QSET_NUM:{ struct ch_reg edata; + memset(&edata, 0, sizeof(struct ch_reg)); + edata.cmd = CHELSIO_GET_QSET_NUM; edata.val = pi->nqsets; if (copy_to_user(useraddr, &edata, sizeof(edata))) -- cgit v1.1 From 7acc7c683a747689aaaaad4fce1683fc3f85e552 Mon Sep 17 00:00:00 2001 From: Wey-Yi Guy Date: Wed, 8 Sep 2010 08:30:20 -0700 Subject: iwlwifi: do not perferm force reset while doing scan When uCode error condition detected, driver try to perform either rf reset or firmware reload in order bring device back to working condition. If rf reset is required and scan is in process, there is no need to issue rf reset since scan already reset the rf. If firmware reload is required and scan is in process, skip the reload request. There is a possibility firmware reload during scan cause problem. [ 485.804046] WARNING: at net/mac80211/main.c:310 ieee80211_restart_hw+0x28/0x62() [ 485.804049] Hardware name: Latitude E6400 [ 485.804052] ieee80211_restart_hw called with hardware scan in progress [ 485.804054] Modules linked in: iwlagn iwlcore bnep sco rfcomm l2cap crc16 bluetooth [last unloaded: iwlcore] [ 485.804069] Pid: 812, comm: kworker/u:3 Tainted: G W 2.6.36-rc3-wl+ #74 [ 485.804072] Call Trace: [ 485.804079] [] warn_slowpath_common+0x60/0x75 [ 485.804084] [] warn_slowpath_fmt+0x26/0x2a [ 485.804089] [] ieee80211_restart_hw+0x28/0x62 [ 485.804102] [] iwl_bg_restart+0x113/0x150 [iwlagn] [ 485.804108] [] process_one_work+0x181/0x25c [ 485.804119] [] ? iwl_bg_restart+0x0/0x150 [iwlagn] [ 485.804124] [] worker_thread+0xf9/0x1f2 [ 485.804128] [] ? worker_thread+0x0/0x1f2 [ 485.804133] [] kthread+0x64/0x69 [ 485.804137] [] ? kthread+0x0/0x69 [ 485.804141] [] kernel_thread_helper+0x6/0x10 [ 485.804145] ---[ end trace 3d4ebdc02d524bbb ]--- [ 485.804148] WG> 1 [ 485.804153] Pid: 812, comm: kworker/u:3 Tainted: G W 2.6.36-rc3-wl+ #74 [ 485.804156] Call Trace: [ 485.804161] [] ? ieee80211_restart_hw+0x5c/0x62 [ 485.804172] [] iwl_bg_restart+0x118/0x150 [iwlagn] [ 485.804177] [] process_one_work+0x181/0x25c [ 485.804188] [] ? iwl_bg_restart+0x0/0x150 [iwlagn] [ 485.804192] [] worker_thread+0xf9/0x1f2 [ 485.804197] [] ? worker_thread+0x0/0x1f2 [ 485.804201] [] kthread+0x64/0x69 [ 485.804205] [] ? kthread+0x0/0x69 [ 485.804209] [] kernel_thread_helper+0x6/0x10 Signed-off-by: Wey-Yi Guy --- drivers/net/wireless/iwlwifi/iwl-core.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index 07dbc27..e23c406 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -2613,6 +2613,11 @@ int iwl_force_reset(struct iwl_priv *priv, int mode, bool external) if (test_bit(STATUS_EXIT_PENDING, &priv->status)) return -EINVAL; + if (test_bit(STATUS_SCANNING, &priv->status)) { + IWL_DEBUG_INFO(priv, "scan in progress.\n"); + return -EINVAL; + } + if (mode >= IWL_MAX_FORCE_RESET) { IWL_DEBUG_INFO(priv, "invalid reset request.\n"); return -EINVAL; -- cgit v1.1 From 4e8cec269dd9e823804141f25ce37c23e72d3c12 Mon Sep 17 00:00:00 2001 From: "Sosnowski, Maciej" Date: Thu, 16 Sep 2010 06:02:26 +0000 Subject: dca: disable dca on IOAT ver.3.0 multiple-IOH platforms Direct Cache Access is not supported on IOAT ver.3.0 multiple-IOH platforms. This patch blocks registering of dca providers when multiple IOH detected with IOAT ver.3.0. Signed-off-by: Maciej Sosnowski Signed-off-by: David S. Miller --- drivers/dca/dca-core.c | 85 ++++++++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 79 insertions(+), 6 deletions(-) (limited to 'drivers') diff --git a/drivers/dca/dca-core.c b/drivers/dca/dca-core.c index 8661c84..b98c676 100644 --- a/drivers/dca/dca-core.c +++ b/drivers/dca/dca-core.c @@ -39,6 +39,10 @@ static DEFINE_SPINLOCK(dca_lock); static LIST_HEAD(dca_domains); +static BLOCKING_NOTIFIER_HEAD(dca_provider_chain); + +static int dca_providers_blocked; + static struct pci_bus *dca_pci_rc_from_dev(struct device *dev) { struct pci_dev *pdev = to_pci_dev(dev); @@ -70,6 +74,60 @@ static void dca_free_domain(struct dca_domain *domain) kfree(domain); } +static int dca_provider_ioat_ver_3_0(struct device *dev) +{ + struct pci_dev *pdev = to_pci_dev(dev); + + return ((pdev->vendor == PCI_VENDOR_ID_INTEL) && + ((pdev->device == PCI_DEVICE_ID_INTEL_IOAT_TBG0) || + (pdev->device == PCI_DEVICE_ID_INTEL_IOAT_TBG1) || + (pdev->device == PCI_DEVICE_ID_INTEL_IOAT_TBG2) || + (pdev->device == PCI_DEVICE_ID_INTEL_IOAT_TBG3) || + (pdev->device == PCI_DEVICE_ID_INTEL_IOAT_TBG4) || + (pdev->device == PCI_DEVICE_ID_INTEL_IOAT_TBG5) || + (pdev->device == PCI_DEVICE_ID_INTEL_IOAT_TBG6) || + (pdev->device == PCI_DEVICE_ID_INTEL_IOAT_TBG7))); +} + +static void unregister_dca_providers(void) +{ + struct dca_provider *dca, *_dca; + struct list_head unregistered_providers; + struct dca_domain *domain; + unsigned long flags; + + blocking_notifier_call_chain(&dca_provider_chain, + DCA_PROVIDER_REMOVE, NULL); + + INIT_LIST_HEAD(&unregistered_providers); + + spin_lock_irqsave(&dca_lock, flags); + + if (list_empty(&dca_domains)) { + spin_unlock_irqrestore(&dca_lock, flags); + return; + } + + /* at this point only one domain in the list is expected */ + domain = list_first_entry(&dca_domains, struct dca_domain, node); + if (!domain) + return; + + list_for_each_entry_safe(dca, _dca, &domain->dca_providers, node) { + list_del(&dca->node); + list_add(&dca->node, &unregistered_providers); + } + + dca_free_domain(domain); + + spin_unlock_irqrestore(&dca_lock, flags); + + list_for_each_entry_safe(dca, _dca, &unregistered_providers, node) { + dca_sysfs_remove_provider(dca); + list_del(&dca->node); + } +} + static struct dca_domain *dca_find_domain(struct pci_bus *rc) { struct dca_domain *domain; @@ -90,9 +148,13 @@ static struct dca_domain *dca_get_domain(struct device *dev) domain = dca_find_domain(rc); if (!domain) { - domain = dca_allocate_domain(rc); - if (domain) - list_add(&domain->node, &dca_domains); + if (dca_provider_ioat_ver_3_0(dev) && !list_empty(&dca_domains)) { + dca_providers_blocked = 1; + } else { + domain = dca_allocate_domain(rc); + if (domain) + list_add(&domain->node, &dca_domains); + } } return domain; @@ -293,8 +355,6 @@ void free_dca_provider(struct dca_provider *dca) } EXPORT_SYMBOL_GPL(free_dca_provider); -static BLOCKING_NOTIFIER_HEAD(dca_provider_chain); - /** * register_dca_provider - register a dca provider * @dca - struct created by alloc_dca_provider() @@ -306,6 +366,13 @@ int register_dca_provider(struct dca_provider *dca, struct device *dev) unsigned long flags; struct dca_domain *domain; + spin_lock_irqsave(&dca_lock, flags); + if (dca_providers_blocked) { + spin_unlock_irqrestore(&dca_lock, flags); + return -ENODEV; + } + spin_unlock_irqrestore(&dca_lock, flags); + err = dca_sysfs_add_provider(dca, dev); if (err) return err; @@ -313,7 +380,13 @@ int register_dca_provider(struct dca_provider *dca, struct device *dev) spin_lock_irqsave(&dca_lock, flags); domain = dca_get_domain(dev); if (!domain) { - spin_unlock_irqrestore(&dca_lock, flags); + if (dca_providers_blocked) { + spin_unlock_irqrestore(&dca_lock, flags); + dca_sysfs_remove_provider(dca); + unregister_dca_providers(); + } else { + spin_unlock_irqrestore(&dca_lock, flags); + } return -ENODEV; } list_add(&dca->node, &domain->dca_providers); -- cgit v1.1 From 04746ff1289f75af26af279eb4b0b3e231677ee4 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 17 Sep 2010 22:58:08 -0700 Subject: qlcnic: dont assume NET_IP_ALIGN is 2 qlcnic driver allocates rx skbs and gives to hardware too bytes of extra storage, allowing for corruption of kernel data. NET_IP_ALIGN being 0 on some platforms (including x86), drivers should not assume it's 2. rds_ring->skb_size = rds_ring->dma_size + NET_IP_ALIGN; ... skb = dev_alloc_skb(rds_ring->skb_size); skb_reserve(skb, 2); pci_map_single(pdev, skb->data, rds_ring->dma_size, PCI_DMA_FROMDEVICE); (and rds_ring->skb_size == rds_ring->dma_size) -> bug Because of extra alignment (1500 + 32) -> four extra bytes are available before the struct skb_shared_info, so corruption is not noticed. Note: this driver could use netdev_alloc_skb_ip_align() Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/qlcnic/qlcnic_init.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/qlcnic/qlcnic_init.c b/drivers/net/qlcnic/qlcnic_init.c index 75ba744..60ab753 100644 --- a/drivers/net/qlcnic/qlcnic_init.c +++ b/drivers/net/qlcnic/qlcnic_init.c @@ -1316,7 +1316,7 @@ qlcnic_alloc_rx_skb(struct qlcnic_adapter *adapter, return -ENOMEM; } - skb_reserve(skb, 2); + skb_reserve(skb, NET_IP_ALIGN); dma = pci_map_single(pdev, skb->data, rds_ring->dma_size, PCI_DMA_FROMDEVICE); -- cgit v1.1 From 8df8fd27123054b02007361bd5483775db84b4a8 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Mon, 20 Sep 2010 02:28:59 +0000 Subject: qlcnic: dont set skb->truesize skb->truesize is set in core network. Dont change it unless dealing with fragments. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/qlcnic/qlcnic_init.c | 5 ----- 1 file changed, 5 deletions(-) (limited to 'drivers') diff --git a/drivers/net/qlcnic/qlcnic_init.c b/drivers/net/qlcnic/qlcnic_init.c index 60ab753..2c7cf0b6 100644 --- a/drivers/net/qlcnic/qlcnic_init.c +++ b/drivers/net/qlcnic/qlcnic_init.c @@ -1404,7 +1404,6 @@ qlcnic_process_rcv(struct qlcnic_adapter *adapter, if (pkt_offset) skb_pull(skb, pkt_offset); - skb->truesize = skb->len + sizeof(struct sk_buff); skb->protocol = eth_type_trans(skb, netdev); napi_gro_receive(&sds_ring->napi, skb); @@ -1466,8 +1465,6 @@ qlcnic_process_lro(struct qlcnic_adapter *adapter, skb_put(skb, lro_length + data_offset); - skb->truesize = skb->len + sizeof(struct sk_buff) + skb_headroom(skb); - skb_pull(skb, l2_hdr_offset); skb->protocol = eth_type_trans(skb, netdev); @@ -1700,8 +1697,6 @@ qlcnic_process_rcv_diag(struct qlcnic_adapter *adapter, if (pkt_offset) skb_pull(skb, pkt_offset); - skb->truesize = skb->len + sizeof(struct sk_buff); - if (!qlcnic_check_loopback_buff(skb->data)) adapter->diag_cnt++; -- cgit v1.1 From 7e96dc7045bff8758804b047c0dfb6868f182500 Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Tue, 21 Sep 2010 13:04:04 -0700 Subject: netxen: dont set skb->truesize skb->truesize is set in core network. Dont change it unless dealing with fragments. Signed-off-by: Eric Dumazet Signed-off-by: David S. Miller --- drivers/net/netxen/netxen_nic_init.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c index cabae7b..b075a35 100644 --- a/drivers/net/netxen/netxen_nic_init.c +++ b/drivers/net/netxen/netxen_nic_init.c @@ -1540,7 +1540,6 @@ netxen_process_rcv(struct netxen_adapter *adapter, if (pkt_offset) skb_pull(skb, pkt_offset); - skb->truesize = skb->len + sizeof(struct sk_buff); skb->protocol = eth_type_trans(skb, netdev); napi_gro_receive(&sds_ring->napi, skb); @@ -1602,8 +1601,6 @@ netxen_process_lro(struct netxen_adapter *adapter, skb_put(skb, lro_length + data_offset); - skb->truesize = skb->len + sizeof(struct sk_buff) + skb_headroom(skb); - skb_pull(skb, l2_hdr_offset); skb->protocol = eth_type_trans(skb, netdev); -- cgit v1.1 From ec5a32f67c603b11d68eb283d94eb89a4f6cfce1 Mon Sep 17 00:00:00 2001 From: Luca Tettamanti Date: Wed, 22 Sep 2010 10:41:58 +0000 Subject: atl1: fix resume adapter->cmb.cmb is initialized when the device is opened and freed when it's closed. Accessing it unconditionally during resume results either in a crash (NULL pointer dereference, when the interface has not been opened yet) or data corruption (when the interface has been used and brought down adapter->cmb.cmb points to a deallocated memory area). Cc: stable@kernel.org Signed-off-by: Luca Tettamanti Acked-by: Chris Snook Signed-off-by: David S. Miller --- drivers/net/atlx/atl1.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c index 63b9ba0..bbd6e30 100644 --- a/drivers/net/atlx/atl1.c +++ b/drivers/net/atlx/atl1.c @@ -2847,10 +2847,11 @@ static int atl1_resume(struct pci_dev *pdev) pci_enable_wake(pdev, PCI_D3cold, 0); atl1_reset_hw(&adapter->hw); - adapter->cmb.cmb->int_stats = 0; - if (netif_running(netdev)) + if (netif_running(netdev)) { + adapter->cmb.cmb->int_stats = 0; atl1_up(adapter); + } netif_device_attach(netdev); return 0; -- cgit v1.1 From 3f5a2a713aad28480d86b0add00c68484b54febc Mon Sep 17 00:00:00 2001 From: Luca Tettamanti Date: Wed, 22 Sep 2010 10:42:31 +0000 Subject: atl1: zero out CMB and SBM in atl1_free_ring_resources They are allocated in atl1_setup_ring_resources, zero out the pointers in atl1_free_ring_resources (like the other resources). Signed-off-by: Luca Tettamanti Acked-by: Chris Snook Signed-off-by: David S. Miller --- drivers/net/atlx/atl1.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers') diff --git a/drivers/net/atlx/atl1.c b/drivers/net/atlx/atl1.c index bbd6e30..c73be28 100644 --- a/drivers/net/atlx/atl1.c +++ b/drivers/net/atlx/atl1.c @@ -1251,6 +1251,12 @@ static void atl1_free_ring_resources(struct atl1_adapter *adapter) rrd_ring->desc = NULL; rrd_ring->dma = 0; + + adapter->cmb.dma = 0; + adapter->cmb.cmb = NULL; + + adapter->smb.dma = 0; + adapter->smb.smb = NULL; } static void atl1_setup_mac_ctrl(struct atl1_adapter *adapter) -- cgit v1.1 From 8395ae8303255b31a8625035fc98391c88b0c257 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Wed, 22 Sep 2010 17:15:08 +0000 Subject: e1000e: 82577/8/9 issues with device in Sx When going to Sx, disable gigabit in PHY (e1000_oem_bits_config_ich8lan) in addition to the MAC before configuring PHY wakeup otherwise the PHY configuration writes might be missed. Also write the LED configuration and SMBus address to the PHY registers (e1000_oem_bits_config_ich8lan and e1000_write_smbus_addr, respectively). The reset is no longer needed since re-auto-negotiation is forced in e1000_oem_bits_config_ich8lan and leaving it in causes issues with auto-negotiating the link. Signed-off-by: Bruce Allan Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/ich8lan.c | 47 ++++++++++++++++++++++++++++++++++++-------- 1 file changed, 39 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 63930d1..822de48 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -125,6 +125,7 @@ /* SMBus Address Phy Register */ #define HV_SMB_ADDR PHY_REG(768, 26) +#define HV_SMB_ADDR_MASK 0x007F #define HV_SMB_ADDR_PEC_EN 0x0200 #define HV_SMB_ADDR_VALID 0x0080 @@ -895,6 +896,34 @@ static s32 e1000_check_reset_block_ich8lan(struct e1000_hw *hw) } /** + * e1000_write_smbus_addr - Write SMBus address to PHY needed during Sx states + * @hw: pointer to the HW structure + * + * Assumes semaphore already acquired. + * + **/ +static s32 e1000_write_smbus_addr(struct e1000_hw *hw) +{ + u16 phy_data; + u32 strap = er32(STRAP); + s32 ret_val = 0; + + strap &= E1000_STRAP_SMBUS_ADDRESS_MASK; + + ret_val = e1000_read_phy_reg_hv_locked(hw, HV_SMB_ADDR, &phy_data); + if (ret_val) + goto out; + + phy_data &= ~HV_SMB_ADDR_MASK; + phy_data |= (strap >> E1000_STRAP_SMBUS_ADDRESS_SHIFT); + phy_data |= HV_SMB_ADDR_PEC_EN | HV_SMB_ADDR_VALID; + ret_val = e1000_write_phy_reg_hv_locked(hw, HV_SMB_ADDR, phy_data); + +out: + return ret_val; +} + +/** * e1000_sw_lcd_config_ich8lan - SW-based LCD Configuration * @hw: pointer to the HW structure * @@ -970,12 +999,7 @@ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw) * When both NVM bits are cleared, SW will configure * them instead. */ - data = er32(STRAP); - data &= E1000_STRAP_SMBUS_ADDRESS_MASK; - reg_data = data >> E1000_STRAP_SMBUS_ADDRESS_SHIFT; - reg_data |= HV_SMB_ADDR_PEC_EN | HV_SMB_ADDR_VALID; - ret_val = e1000_write_phy_reg_hv_locked(hw, HV_SMB_ADDR, - reg_data); + ret_val = e1000_write_smbus_addr(hw); if (ret_val) goto out; @@ -3460,13 +3484,20 @@ void e1000e_gig_downshift_workaround_ich8lan(struct e1000_hw *hw) void e1000e_disable_gig_wol_ich8lan(struct e1000_hw *hw) { u32 phy_ctrl; + s32 ret_val; phy_ctrl = er32(PHY_CTRL); phy_ctrl |= E1000_PHY_CTRL_D0A_LPLU | E1000_PHY_CTRL_GBE_DISABLE; ew32(PHY_CTRL, phy_ctrl); - if (hw->mac.type >= e1000_pchlan) - e1000_phy_hw_reset_ich8lan(hw); + if (hw->mac.type >= e1000_pchlan) { + e1000_oem_bits_config_ich8lan(hw, true); + ret_val = hw->phy.ops.acquire(hw); + if (ret_val) + return; + e1000_write_smbus_addr(hw); + hw->phy.ops.release(hw); + } } /** -- cgit v1.1 From 87fb7410cd8d4396dee0155526568645adba3b99 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Wed, 22 Sep 2010 17:15:33 +0000 Subject: e1000e: 82579 SMBus address and LEDs incorrect after device reset Since the hardware is prevented from performing automatic PHY configuration (the driver does it instead), the OEM_WRITE_ENABLE bit in the EXTCNF_CTRL register will not get cleared preventing the SMBus address and the LED configuration to be written to the PHY registers. On 82579, do not check the OEM_WRITE_ENABLE bit. Signed-off-by: Bruce Allan Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/ich8lan.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 822de48..fc8c3ce 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -990,9 +990,9 @@ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw) cnf_base_addr = data & E1000_EXTCNF_CTRL_EXT_CNF_POINTER_MASK; cnf_base_addr >>= E1000_EXTCNF_CTRL_EXT_CNF_POINTER_SHIFT; - if (!(data & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE) && - ((hw->mac.type == e1000_pchlan) || - (hw->mac.type == e1000_pch2lan))) { + if ((!(data & E1000_EXTCNF_CTRL_OEM_WRITE_ENABLE) && + (hw->mac.type == e1000_pchlan)) || + (hw->mac.type == e1000_pch2lan)) { /* * HW configures the SMBus address and LEDs when the * OEM and LCD Write Enable bits are set in the NVM. -- cgit v1.1 From 5f3eed6fe0e36e4b56c8dd9160241a868ee0de2a Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Wed, 22 Sep 2010 17:15:54 +0000 Subject: e1000e: 82566DC fails to get link Two recent patches to cleanup the reset[1] and initial PHY configuration[2] code paths for ICH/PCH devices inadvertently left out a 10msec delay and device ID check respectively which are necessary for the 82566DC (device id 0x104b) to be configured properly, otherwise it will not get link. [1] commit e98cac447cc1cc418dff1d610a5c79c4f2bdec7f [2] commit 3f0c16e84438d657d29446f85fe375794a93f159 CC: stable@kernel.org Signed-off-by: Bruce Allan Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/ich8lan.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index fc8c3ce..6f9cb0d 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -932,7 +932,6 @@ out: **/ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw) { - struct e1000_adapter *adapter = hw->adapter; struct e1000_phy_info *phy = &hw->phy; u32 i, data, cnf_size, cnf_base_addr, sw_cfg_mask; s32 ret_val = 0; @@ -950,7 +949,8 @@ static s32 e1000_sw_lcd_config_ich8lan(struct e1000_hw *hw) if (phy->type != e1000_phy_igp_3) return ret_val; - if (adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_AMT) { + if ((hw->adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_AMT) || + (hw->adapter->pdev->device == E1000_DEV_ID_ICH8_IGP_C)) { sw_cfg_mask = E1000_FEXTNVM_SW_CONFIG; break; } @@ -1626,6 +1626,9 @@ static s32 e1000_post_phy_reset_ich8lan(struct e1000_hw *hw) if (e1000_check_reset_block(hw)) goto out; + /* Allow time for h/w to get to quiescent state after reset */ + msleep(10); + /* Perform any necessary post-reset workarounds */ switch (hw->mac.type) { case e1000_pchlan: -- cgit v1.1 From 831bd2e6a6c09588fdde453ecb858f050ac1b942 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Wed, 22 Sep 2010 17:16:18 +0000 Subject: e1000e: 82579 unaccounted missed packets On 82579, there is a hardware bug that can cause received packets to not get transferred from the PHY to the MAC due to K1 (a power saving feature of the PHY-MAC interconnect similar to ASPM L1). Since the MAC controls the accounting of missed packets, these will go unnoticed. Workaround the issue by setting the K1 beacon duration according to the link speed. Signed-off-by: Bruce Allan Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/hw.h | 1 + drivers/net/e1000e/ich8lan.c | 48 ++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 49 insertions(+) (limited to 'drivers') diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h index 66ed08f..ba302a5 100644 --- a/drivers/net/e1000e/hw.h +++ b/drivers/net/e1000e/hw.h @@ -57,6 +57,7 @@ enum e1e_registers { E1000_SCTL = 0x00024, /* SerDes Control - RW */ E1000_FCAL = 0x00028, /* Flow Control Address Low - RW */ E1000_FCAH = 0x0002C, /* Flow Control Address High -RW */ + E1000_FEXTNVM4 = 0x00024, /* Future Extended NVM 4 - RW */ E1000_FEXTNVM = 0x00028, /* Future Extended NVM - RW */ E1000_FCT = 0x00030, /* Flow Control Type - RW */ E1000_VET = 0x00038, /* VLAN Ether Type - RW */ diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 6f9cb0d..89b1e1a 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -105,6 +105,10 @@ #define E1000_FEXTNVM_SW_CONFIG 1 #define E1000_FEXTNVM_SW_CONFIG_ICH8M (1 << 27) /* Bit redefined for ICH8M :/ */ +#define E1000_FEXTNVM4_BEACON_DURATION_MASK 0x7 +#define E1000_FEXTNVM4_BEACON_DURATION_8USEC 0x7 +#define E1000_FEXTNVM4_BEACON_DURATION_16USEC 0x3 + #define PCIE_ICH8_SNOOP_ALL PCIE_NO_SNOOP_ALL #define E1000_ICH_RAR_ENTRIES 7 @@ -238,6 +242,7 @@ static s32 e1000_k1_gig_workaround_hv(struct e1000_hw *hw, bool link); static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw); static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw); static bool e1000_check_mng_mode_pchlan(struct e1000_hw *hw); +static s32 e1000_k1_workaround_lv(struct e1000_hw *hw); static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg) { @@ -653,6 +658,12 @@ static s32 e1000_check_for_copper_link_ich8lan(struct e1000_hw *hw) goto out; } + if (hw->mac.type == e1000_pch2lan) { + ret_val = e1000_k1_workaround_lv(hw); + if (ret_val) + goto out; + } + /* * Check if there was DownShift, must be checked * immediately after link-up @@ -1583,6 +1594,43 @@ out: } /** + * e1000_k1_gig_workaround_lv - K1 Si workaround + * @hw: pointer to the HW structure + * + * Workaround to set the K1 beacon duration for 82579 parts + **/ +static s32 e1000_k1_workaround_lv(struct e1000_hw *hw) +{ + s32 ret_val = 0; + u16 status_reg = 0; + u32 mac_reg; + + if (hw->mac.type != e1000_pch2lan) + goto out; + + /* Set K1 beacon duration based on 1Gbps speed or otherwise */ + ret_val = e1e_rphy(hw, HV_M_STATUS, &status_reg); + if (ret_val) + goto out; + + if ((status_reg & (HV_M_STATUS_LINK_UP | HV_M_STATUS_AUTONEG_COMPLETE)) + == (HV_M_STATUS_LINK_UP | HV_M_STATUS_AUTONEG_COMPLETE)) { + mac_reg = er32(FEXTNVM4); + mac_reg &= ~E1000_FEXTNVM4_BEACON_DURATION_MASK; + + if (status_reg & HV_M_STATUS_SPEED_1000) + mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_8USEC; + else + mac_reg |= E1000_FEXTNVM4_BEACON_DURATION_16USEC; + + ew32(FEXTNVM4, mac_reg); + } + +out: + return ret_val; +} + +/** * e1000_lan_init_done_ich8lan - Check for PHY config completion * @hw: pointer to the HW structure * -- cgit v1.1 From a1ce647378c0262fe72757f989e961b2de6460a5 Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Wed, 22 Sep 2010 17:16:40 +0000 Subject: e1000e: 82579 jumbo frame workaround causing CRC errors The subject workaround was causing CRC errors due to writing the wrong register with updates of the RCTL register. It was also found that the workaround function which modifies the RCTL register was being called in the middle of a read-modify-write operation of the RCTL register, so the function call has been moved appropriately. Lastly, jumbo frames must not be allowed when CRC stripping is disabled by a module parameter because the workaround requires the CRC be stripped. Signed-off-by: Bruce Allan Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/ich8lan.c | 12 +----------- drivers/net/e1000e/netdev.c | 29 +++++++++++++++++++---------- 2 files changed, 20 insertions(+), 21 deletions(-) (limited to 'drivers') diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index 89b1e1a..bb346ae 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -1475,10 +1475,6 @@ s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable) goto out; /* Enable jumbo frame workaround in the PHY */ - e1e_rphy(hw, PHY_REG(769, 20), &data); - ret_val = e1e_wphy(hw, PHY_REG(769, 20), data & ~(1 << 14)); - if (ret_val) - goto out; e1e_rphy(hw, PHY_REG(769, 23), &data); data &= ~(0x7F << 5); data |= (0x37 << 5); @@ -1487,7 +1483,6 @@ s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable) goto out; e1e_rphy(hw, PHY_REG(769, 16), &data); data &= ~(1 << 13); - data |= (1 << 12); ret_val = e1e_wphy(hw, PHY_REG(769, 16), data); if (ret_val) goto out; @@ -1512,7 +1507,7 @@ s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable) mac_reg = er32(RCTL); mac_reg &= ~E1000_RCTL_SECRC; - ew32(FFLT_DBG, mac_reg); + ew32(RCTL, mac_reg); ret_val = e1000e_read_kmrn_reg(hw, E1000_KMRNCTRLSTA_CTRL_OFFSET, @@ -1538,17 +1533,12 @@ s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable) goto out; /* Write PHY register values back to h/w defaults */ - e1e_rphy(hw, PHY_REG(769, 20), &data); - ret_val = e1e_wphy(hw, PHY_REG(769, 20), data & ~(1 << 14)); - if (ret_val) - goto out; e1e_rphy(hw, PHY_REG(769, 23), &data); data &= ~(0x7F << 5); ret_val = e1e_wphy(hw, PHY_REG(769, 23), data); if (ret_val) goto out; e1e_rphy(hw, PHY_REG(769, 16), &data); - data &= ~(1 << 12); data |= (1 << 13); ret_val = e1e_wphy(hw, PHY_REG(769, 16), data); if (ret_val) diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 2b8ef44..e561d15 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -2704,6 +2704,16 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter) u32 psrctl = 0; u32 pages = 0; + /* Workaround Si errata on 82579 - configure jumbo frame flow */ + if (hw->mac.type == e1000_pch2lan) { + s32 ret_val; + + if (adapter->netdev->mtu > ETH_DATA_LEN) + ret_val = e1000_lv_jumbo_workaround_ich8lan(hw, true); + else + ret_val = e1000_lv_jumbo_workaround_ich8lan(hw, false); + } + /* Program MC offset vector base */ rctl = er32(RCTL); rctl &= ~(3 << E1000_RCTL_MO_SHIFT); @@ -2744,16 +2754,6 @@ static void e1000_setup_rctl(struct e1000_adapter *adapter) e1e_wphy(hw, 22, phy_data); } - /* Workaround Si errata on 82579 - configure jumbo frame flow */ - if (hw->mac.type == e1000_pch2lan) { - s32 ret_val; - - if (rctl & E1000_RCTL_LPE) - ret_val = e1000_lv_jumbo_workaround_ich8lan(hw, true); - else - ret_val = e1000_lv_jumbo_workaround_ich8lan(hw, false); - } - /* Setup buffer sizes */ rctl &= ~E1000_RCTL_SZ_4096; rctl |= E1000_RCTL_BSEX; @@ -4833,6 +4833,15 @@ static int e1000_change_mtu(struct net_device *netdev, int new_mtu) return -EINVAL; } + /* Jumbo frame workaround on 82579 requires CRC be stripped */ + if ((adapter->hw.mac.type == e1000_pch2lan) && + !(adapter->flags2 & FLAG2_CRC_STRIPPING) && + (new_mtu > ETH_DATA_LEN)) { + e_err("Jumbo Frames not supported on 82579 when CRC " + "stripping is disabled.\n"); + return -EINVAL; + } + /* 82573 Errata 17 */ if (((adapter->hw.mac.type == e1000_82573) || (adapter->hw.mac.type == e1000_82574)) && -- cgit v1.1 From 605c82bab5abe0816e5e32716875c245f89f39da Mon Sep 17 00:00:00 2001 From: Bruce Allan Date: Wed, 22 Sep 2010 17:17:01 +0000 Subject: e1000e: 82579 do not gate auto config of PHY by hardware during nominal use For non-managed versions of 82579, set the bit that prevents the hardware from automatically configuring the PHY after resets only when the driver performs a reset, clear the bit after resets. This is so the hardware can configure the PHY automatically when the part is reset in a manner that is not controlled by the driver (e.g. in a virtual environment via PCI FLR) otherwise the PHY will be mis-configured causing issues such as failing to link at 1000Mbps. For managed versions of 82579, keep the previous behavior since the manageability firmware will handle the PHY configuration. Signed-off-by: Bruce Allan Tested-by: Jeff Pieper Signed-off-by: Jeff Kirsher Signed-off-by: David S. Miller --- drivers/net/e1000e/ich8lan.c | 77 ++++++++++++++++++++++++++++++++++++++------ 1 file changed, 68 insertions(+), 9 deletions(-) (limited to 'drivers') diff --git a/drivers/net/e1000e/ich8lan.c b/drivers/net/e1000e/ich8lan.c index bb346ae..57b5435 100644 --- a/drivers/net/e1000e/ich8lan.c +++ b/drivers/net/e1000e/ich8lan.c @@ -243,6 +243,7 @@ static s32 e1000_set_mdio_slow_mode_hv(struct e1000_hw *hw); static bool e1000_check_mng_mode_ich8lan(struct e1000_hw *hw); static bool e1000_check_mng_mode_pchlan(struct e1000_hw *hw); static s32 e1000_k1_workaround_lv(struct e1000_hw *hw); +static void e1000_gate_hw_phy_config_ich8lan(struct e1000_hw *hw, bool gate); static inline u16 __er16flash(struct e1000_hw *hw, unsigned long reg) { @@ -278,7 +279,7 @@ static inline void __ew32flash(struct e1000_hw *hw, unsigned long reg, u32 val) static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) { struct e1000_phy_info *phy = &hw->phy; - u32 ctrl; + u32 ctrl, fwsm; s32 ret_val = 0; phy->addr = 1; @@ -300,7 +301,8 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) * disabled, then toggle the LANPHYPC Value bit to force * the interconnect to PCIe mode. */ - if (!(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) { + fwsm = er32(FWSM); + if (!(fwsm & E1000_ICH_FWSM_FW_VALID)) { ctrl = er32(CTRL); ctrl |= E1000_CTRL_LANPHYPC_OVERRIDE; ctrl &= ~E1000_CTRL_LANPHYPC_VALUE; @@ -309,6 +311,13 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) ctrl &= ~E1000_CTRL_LANPHYPC_OVERRIDE; ew32(CTRL, ctrl); msleep(50); + + /* + * Gate automatic PHY configuration by hardware on + * non-managed 82579 + */ + if (hw->mac.type == e1000_pch2lan) + e1000_gate_hw_phy_config_ich8lan(hw, true); } /* @@ -321,6 +330,13 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw) if (ret_val) goto out; + /* Ungate automatic PHY configuration on non-managed 82579 */ + if ((hw->mac.type == e1000_pch2lan) && + !(fwsm & E1000_ICH_FWSM_FW_VALID)) { + msleep(10); + e1000_gate_hw_phy_config_ich8lan(hw, false); + } + phy->id = e1000_phy_unknown; ret_val = e1000e_get_phy_id(hw); if (ret_val) @@ -567,13 +583,10 @@ static s32 e1000_init_mac_params_ich8lan(struct e1000_adapter *adapter) if (mac->type == e1000_ich8lan) e1000e_set_kmrn_lock_loss_workaround_ich8lan(hw, true); - /* Disable PHY configuration by hardware, config by software */ - if (mac->type == e1000_pch2lan) { - u32 extcnf_ctrl = er32(EXTCNF_CTRL); - - extcnf_ctrl |= E1000_EXTCNF_CTRL_GATE_PHY_CFG; - ew32(EXTCNF_CTRL, extcnf_ctrl); - } + /* Gate automatic PHY configuration by hardware on managed 82579 */ + if ((mac->type == e1000_pch2lan) && + (er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) + e1000_gate_hw_phy_config_ich8lan(hw, true); return 0; } @@ -1621,6 +1634,32 @@ out: } /** + * e1000_gate_hw_phy_config_ich8lan - disable PHY config via hardware + * @hw: pointer to the HW structure + * @gate: boolean set to true to gate, false to ungate + * + * Gate/ungate the automatic PHY configuration via hardware; perform + * the configuration via software instead. + **/ +static void e1000_gate_hw_phy_config_ich8lan(struct e1000_hw *hw, bool gate) +{ + u32 extcnf_ctrl; + + if (hw->mac.type != e1000_pch2lan) + return; + + extcnf_ctrl = er32(EXTCNF_CTRL); + + if (gate) + extcnf_ctrl |= E1000_EXTCNF_CTRL_GATE_PHY_CFG; + else + extcnf_ctrl &= ~E1000_EXTCNF_CTRL_GATE_PHY_CFG; + + ew32(EXTCNF_CTRL, extcnf_ctrl); + return; +} + +/** * e1000_lan_init_done_ich8lan - Check for PHY config completion * @hw: pointer to the HW structure * @@ -1695,6 +1734,13 @@ static s32 e1000_post_phy_reset_ich8lan(struct e1000_hw *hw) /* Configure the LCD with the OEM bits in NVM */ ret_val = e1000_oem_bits_config_ich8lan(hw, true); + /* Ungate automatic PHY configuration on non-managed 82579 */ + if ((hw->mac.type == e1000_pch2lan) && + !(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) { + msleep(10); + e1000_gate_hw_phy_config_ich8lan(hw, false); + } + out: return ret_val; } @@ -1711,6 +1757,11 @@ static s32 e1000_phy_hw_reset_ich8lan(struct e1000_hw *hw) { s32 ret_val = 0; + /* Gate automatic PHY configuration by hardware on non-managed 82579 */ + if ((hw->mac.type == e1000_pch2lan) && + !(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) + e1000_gate_hw_phy_config_ich8lan(hw, true); + ret_val = e1000e_phy_hw_reset_generic(hw); if (ret_val) goto out; @@ -2975,6 +3026,14 @@ static s32 e1000_reset_hw_ich8lan(struct e1000_hw *hw) * external PHY is reset. */ ctrl |= E1000_CTRL_PHY_RST; + + /* + * Gate automatic PHY configuration by hardware on + * non-managed 82579 + */ + if ((hw->mac.type == e1000_pch2lan) && + !(er32(FWSM) & E1000_ICH_FWSM_FW_VALID)) + e1000_gate_hw_phy_config_ich8lan(hw, true); } ret_val = e1000_acquire_swflag_ich8lan(hw); e_dbg("Issuing a global reset to ich8lan\n"); -- cgit v1.1 From e0f9c4f332c99b213d4a0b7cd21dc0781ceb3d86 Mon Sep 17 00:00:00 2001 From: Ondrej Zary Date: Thu, 23 Sep 2010 10:59:18 +0000 Subject: de2104x: disable autonegotiation on broken hardware At least on older 21041-AA chips (mine is rev. 11), TP duplex autonegotiation causes the card not to work at all (link is up but no packets are transmitted). de4x5 disables autonegotiation completely. But it seems to work on newer (21041-PA rev. 21) so disable it only on rev<20 chips. Signed-off-by: Ondrej Zary Acked-by: Jeff Garzik Signed-off-by: David S. Miller --- drivers/net/tulip/de2104x.c | 12 ++++++++++-- 1 file changed, 10 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c index 5efa577..9d6b7e9 100644 --- a/drivers/net/tulip/de2104x.c +++ b/drivers/net/tulip/de2104x.c @@ -364,6 +364,8 @@ static u16 t21040_csr15[] = { 0, 0, 0x0006, 0x0000, 0x0000, }; /* 21041 transceiver register settings: TP AUTO, BNC, AUI, TP, TP FD*/ static u16 t21041_csr13[] = { 0xEF01, 0xEF09, 0xEF09, 0xEF01, 0xEF09, }; static u16 t21041_csr14[] = { 0xFFFF, 0xF7FD, 0xF7FD, 0x6F3F, 0x6F3D, }; +/* If on-chip autonegotiation is broken, use half-duplex (FF3F) instead */ +static u16 t21041_csr14_brk[] = { 0xFF3F, 0xF7FD, 0xF7FD, 0x6F3F, 0x6F3D, }; static u16 t21041_csr15[] = { 0x0008, 0x0006, 0x000E, 0x0008, 0x0008, }; @@ -1911,8 +1913,14 @@ fill_defaults: for (i = 0; i < DE_MAX_MEDIA; i++) { if (de->media[i].csr13 == 0xffff) de->media[i].csr13 = t21041_csr13[i]; - if (de->media[i].csr14 == 0xffff) - de->media[i].csr14 = t21041_csr14[i]; + if (de->media[i].csr14 == 0xffff) { + /* autonegotiation is broken at least on some chip + revisions - rev. 0x21 works, 0x11 does not */ + if (de->pdev->revision < 0x20) + de->media[i].csr14 = t21041_csr14_brk[i]; + else + de->media[i].csr14 = t21041_csr14[i]; + } if (de->media[i].csr15 == 0xffff) de->media[i].csr15 = t21041_csr15[i]; } -- cgit v1.1 From b0255a02351b00ca55f4eb2588d05a5db9dd1a58 Mon Sep 17 00:00:00 2001 From: Ondrej Zary Date: Fri, 24 Sep 2010 23:57:02 +0000 Subject: de2104x: fix power management At least my 21041 cards come out of suspend with bus mastering disabled so they did not work after resume(no data transferred). After adding pci_set_master(), the driver oopsed immediately on resume - because de_clean_rings() is called on suspend but de_init_rings() call was missing in resume. Also disable link (reset SIA) before sleep (de4x5 does this too). Signed-off-by: Ondrej Zary Acked-by: Jeff Garzik Signed-off-by: David S. Miller --- drivers/net/tulip/de2104x.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c index 9d6b7e9..a0be7c2 100644 --- a/drivers/net/tulip/de2104x.c +++ b/drivers/net/tulip/de2104x.c @@ -1231,6 +1231,7 @@ static void de_adapter_sleep (struct de_private *de) if (de->de21040) return; + dw32(CSR13, 0); /* Reset phy */ pci_read_config_dword(de->pdev, PCIPM, &pmctl); pmctl |= PM_Sleep; pci_write_config_dword(de->pdev, PCIPM, pmctl); @@ -2166,6 +2167,8 @@ static int de_resume (struct pci_dev *pdev) dev_err(&dev->dev, "pci_enable_device failed in resume\n"); goto out; } + pci_set_master(pdev); + de_init_rings(de); de_init_hw(de); out_attach: netif_device_attach(dev); -- cgit v1.1 From ca9a783575d2affed30ef27a3427a7705527ddac Mon Sep 17 00:00:00 2001 From: Ondrej Zary Date: Sat, 25 Sep 2010 10:39:17 +0000 Subject: de2104x: fix TP link detection Compex FreedomLine 32 PnP-PCI2 cards have only TP and BNC connectors but the SROM contains AUI port too. When TP loses link, the driver switches to non-existing AUI port (which reports that carrier is always present). Connecting TP back generates LinkPass interrupt but de_media_interrupt() is broken - it only updates the link state of currently connected media, ignoring the fact that LinkPass and LinkFail bits of MacStatus register belong to the TP port only (the chip documentation says that). This patch changes de_media_interrupt() to switch media to TP when link goes up (and media type is not locked) and also to update the link state only when the TP port is used. Also the NonselPortActive (and also SelPortActive) bits of SIAStatus register need to be cleared (by writing 1) after reading or they're useless. Signed-off-by: Ondrej Zary Acked-by: Jeff Garzik Signed-off-by: David S. Miller --- drivers/net/tulip/de2104x.c | 23 +++++++++++++++++++++-- 1 file changed, 21 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/tulip/de2104x.c b/drivers/net/tulip/de2104x.c index a0be7c2..9124c5c 100644 --- a/drivers/net/tulip/de2104x.c +++ b/drivers/net/tulip/de2104x.c @@ -243,6 +243,7 @@ enum { NWayState = (1 << 14) | (1 << 13) | (1 << 12), NWayRestart = (1 << 12), NonselPortActive = (1 << 9), + SelPortActive = (1 << 8), LinkFailStatus = (1 << 2), NetCxnErr = (1 << 1), }; @@ -1066,6 +1067,9 @@ static void de21041_media_timer (unsigned long data) unsigned int carrier; unsigned long flags; + /* clear port active bits */ + dw32(SIAStatus, NonselPortActive | SelPortActive); + carrier = (status & NetCxnErr) ? 0 : 1; if (carrier) { @@ -1160,14 +1164,29 @@ no_link_yet: static void de_media_interrupt (struct de_private *de, u32 status) { if (status & LinkPass) { + /* Ignore if current media is AUI or BNC and we can't use TP */ + if ((de->media_type == DE_MEDIA_AUI || + de->media_type == DE_MEDIA_BNC) && + (de->media_lock || + !de_ok_to_advertise(de, DE_MEDIA_TP_AUTO))) + return; + /* If current media is not TP, change it to TP */ + if ((de->media_type == DE_MEDIA_AUI || + de->media_type == DE_MEDIA_BNC)) { + de->media_type = DE_MEDIA_TP_AUTO; + de_stop_rxtx(de); + de_set_media(de); + de_start_rxtx(de); + } de_link_up(de); mod_timer(&de->media_timer, jiffies + DE_TIMER_LINK); return; } BUG_ON(!(status & LinkFail)); - - if (netif_carrier_ok(de->dev)) { + /* Mark the link as down only if current media is TP */ + if (netif_carrier_ok(de->dev) && de->media_type != DE_MEDIA_AUI && + de->media_type != DE_MEDIA_BNC) { de_link_down(de); mod_timer(&de->media_timer, jiffies + DE_TIMER_NO_LINK); } -- cgit v1.1 From 62038e4a146b97352d5911e6ede36c58d4187c3e Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Vincent=20Stehl=C3=A9?= Date: Sun, 26 Sep 2010 18:50:05 -0700 Subject: smsc911x: Add MODULE_ALIAS() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This enables auto loading for the smsc911x ethernet driver. Signed-off-by: Vincent Stehlé Signed-off-by: David S. Miller --- drivers/net/smsc911x.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/net/smsc911x.c b/drivers/net/smsc911x.c index 0909ae9..8150ba1 100644 --- a/drivers/net/smsc911x.c +++ b/drivers/net/smsc911x.c @@ -58,6 +58,7 @@ MODULE_LICENSE("GPL"); MODULE_VERSION(SMSC_DRV_VERSION); +MODULE_ALIAS("platform:smsc911x"); #if USE_DEBUG > 0 static int debug = 16; -- cgit v1.1 From 52933f052186877afd218aef7a1b2dbdb010939f Mon Sep 17 00:00:00 2001 From: Kulikov Vasiliy Date: Sat, 25 Sep 2010 23:58:00 +0000 Subject: ibm_newemac: use free_netdev(netdev) instead of kfree() Freeing netdev without free_netdev() leads to net, tx leaks. I might lead to dereferencing freed pointer. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) @@ struct net_device* dev; @@ -kfree(dev) +free_netdev(dev) Signed-off-by: David S. Miller --- drivers/net/ibm_newemac/core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/net/ibm_newemac/core.c b/drivers/net/ibm_newemac/core.c index 3506fd6..519e19e 100644 --- a/drivers/net/ibm_newemac/core.c +++ b/drivers/net/ibm_newemac/core.c @@ -2928,7 +2928,7 @@ static int __devinit emac_probe(struct platform_device *ofdev, if (dev->emac_irq != NO_IRQ) irq_dispose_mapping(dev->emac_irq); err_free: - kfree(ndev); + free_netdev(ndev); err_gone: /* if we were on the bootlist, remove us as we won't show up and * wake up all waiters to notify them in case they were waiting @@ -2971,7 +2971,7 @@ static int __devexit emac_remove(struct platform_device *ofdev) if (dev->emac_irq != NO_IRQ) irq_dispose_mapping(dev->emac_irq); - kfree(dev->ndev); + free_netdev(dev->ndev); return 0; } -- cgit v1.1 From 22138d307329e1968fc698821095b87c2fd5de12 Mon Sep 17 00:00:00 2001 From: Kulikov Vasiliy Date: Sat, 25 Sep 2010 23:58:03 +0000 Subject: rionet: use free_netdev(netdev) instead of kfree() Freeing netdev without free_netdev() leads to net, tx leaks. I might lead to dereferencing freed pointer. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) @@ struct net_device* dev; @@ -kfree(dev) +free_netdev(dev) Signed-off-by: David S. Miller --- drivers/net/rionet.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/rionet.c b/drivers/net/rionet.c index 07eb884..44150f2 100644 --- a/drivers/net/rionet.c +++ b/drivers/net/rionet.c @@ -384,7 +384,7 @@ static void rionet_remove(struct rio_dev *rdev) free_pages((unsigned long)rionet_active, rdev->net->hport->sys_size ? __ilog2(sizeof(void *)) + 4 : 0); unregister_netdev(ndev); - kfree(ndev); + free_netdev(ndev); list_for_each_entry_safe(peer, tmp, &rionet_peers, node) { list_del(&peer->node); -- cgit v1.1 From 8d879de89807d82bc4cc3e9d73609b874fa9458c Mon Sep 17 00:00:00 2001 From: Kulikov Vasiliy Date: Sat, 25 Sep 2010 23:58:06 +0000 Subject: sgiseeq: use free_netdev(netdev) instead of kfree() Freeing netdev without free_netdev() leads to net, tx leaks. I might lead to dereferencing freed pointer. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) @@ struct net_device* dev; @@ -kfree(dev) +free_netdev(dev) Signed-off-by: David S. Miller --- drivers/net/sgiseeq.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/net/sgiseeq.c b/drivers/net/sgiseeq.c index cc4bd8c..9265315 100644 --- a/drivers/net/sgiseeq.c +++ b/drivers/net/sgiseeq.c @@ -804,7 +804,7 @@ static int __devinit sgiseeq_probe(struct platform_device *pdev) err_out_free_page: free_page((unsigned long) sp->srings); err_out_free_dev: - kfree(dev); + free_netdev(dev); err_out: return err; -- cgit v1.1 From bc68580d41b131396054a1a04a7df4948555ed97 Mon Sep 17 00:00:00 2001 From: Vasiliy Kulikov Date: Sun, 26 Sep 2010 18:56:06 -0700 Subject: s390: use free_netdev(netdev) instead of kfree() Freeing netdev without free_netdev() leads to net, tx leaks. I might lead to dereferencing freed pointer. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) @@ struct net_device* dev; @@ -kfree(dev) +free_netdev(dev) Signed-off-by: David S. Miller --- drivers/s390/net/ctcm_main.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/s390/net/ctcm_main.c b/drivers/s390/net/ctcm_main.c index 6edf20b..2c7d2d9 100644 --- a/drivers/s390/net/ctcm_main.c +++ b/drivers/s390/net/ctcm_main.c @@ -1154,7 +1154,7 @@ static struct net_device *ctcm_init_netdevice(struct ctcm_priv *priv) dev_fsm, dev_fsm_len, GFP_KERNEL); if (priv->fsm == NULL) { CTCMY_DBF_DEV(SETUP, dev, "init_fsm error"); - kfree(dev); + free_netdev(dev); return NULL; } fsm_newstate(priv->fsm, DEV_STATE_STOPPED); @@ -1165,7 +1165,7 @@ static struct net_device *ctcm_init_netdevice(struct ctcm_priv *priv) grp = ctcmpc_init_mpc_group(priv); if (grp == NULL) { MPC_DBF_DEV(SETUP, dev, "init_mpc_group error"); - kfree(dev); + free_netdev(dev); return NULL; } tasklet_init(&grp->mpc_tasklet2, -- cgit v1.1