From c0a36f08f4241538368c0ceafd0aa07a0e57b47e Mon Sep 17 00:00:00 2001 From: Archana Patni Date: Mon, 19 May 2014 12:19:00 +0100 Subject: iio: hid-sensors: Get feature report from sensor hub after changing power state Some sensor hubs require a get feature report call to be issued soon after changing the power state of the sensor. Without this, the sensor remains in the current state. This patch adds a call soon after the power state. This is retained as a generic call across all sensor hubs since the behavior has been noticed on more than one implementation. Signed-off-by: Archana Patni Signed-off-by: Subramony Sesha Reviewed-by: Srinivas Pandruvada Signed-off-by: Jonathan Cameron --- drivers/iio/common/hid-sensors/hid-sensor-trigger.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers') diff --git a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c index dbefbda..f26f52d 100644 --- a/drivers/iio/common/hid-sensors/hid-sensor-trigger.c +++ b/drivers/iio/common/hid-sensors/hid-sensor-trigger.c @@ -73,6 +73,9 @@ static int hid_sensor_data_rdy_trigger_set_state(struct iio_trigger *trig, (s32)report_val); } + sensor_hub_get_feature(st->hsdev, st->power_state.report_id, + st->power_state.index, + &state_val); return 0; } -- cgit v1.1 From d29f592929489d0a7c414396fae28119f3d280e1 Mon Sep 17 00:00:00 2001 From: Peter Meerwald Date: Tue, 20 May 2014 08:36:00 +0100 Subject: iio: Fix two mpl3115 issues in measurement conversion MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit (i) pressure is 20-bit unsigned, not signed; the buffer description is incorrect; for raw reads, this is just cosmetic (ii) temperature is 12-bit signed, not 16-bit; this affects readout of temperatures below zero as the sign bit is incorrectly processed reported via private mail Cc: stable@vger.kernel.org Signed-off-by: Peter Meerwald Reported-by: Robert Deliën Signed-off-by: Jonathan Cameron --- drivers/iio/pressure/mpl3115.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/pressure/mpl3115.c b/drivers/iio/pressure/mpl3115.c index ba6d0c5..01b2e0b 100644 --- a/drivers/iio/pressure/mpl3115.c +++ b/drivers/iio/pressure/mpl3115.c @@ -98,7 +98,7 @@ static int mpl3115_read_raw(struct iio_dev *indio_dev, mutex_unlock(&data->lock); if (ret < 0) return ret; - *val = sign_extend32(be32_to_cpu(tmp) >> 12, 23); + *val = be32_to_cpu(tmp) >> 12; return IIO_VAL_INT; case IIO_TEMP: /* in 0.0625 celsius / LSB */ mutex_lock(&data->lock); @@ -112,7 +112,7 @@ static int mpl3115_read_raw(struct iio_dev *indio_dev, mutex_unlock(&data->lock); if (ret < 0) return ret; - *val = sign_extend32(be32_to_cpu(tmp) >> 20, 15); + *val = sign_extend32(be32_to_cpu(tmp) >> 20, 11); return IIO_VAL_INT; default: return -EINVAL; @@ -185,7 +185,7 @@ static const struct iio_chan_spec mpl3115_channels[] = { BIT(IIO_CHAN_INFO_SCALE), .scan_index = 0, .scan_type = { - .sign = 's', + .sign = 'u', .realbits = 20, .storagebits = 32, .shift = 12, -- cgit v1.1 From c404618cd06dad771495fe1cf9d5a63b5664f65f Mon Sep 17 00:00:00 2001 From: Mario Schuknecht Date: Tue, 27 May 2014 07:19:00 +0100 Subject: staging: iio: tsl2x7x_core: fix proximity treshold Consider high byte of proximity min and max treshold in function 'tsl2x7x_chip_on'. So far, the high byte was not set. Cc: Stable@vger.kernel.org Signed-off-by: Mario Schuknecht Signed-off-by: Jonathan Cameron --- drivers/staging/iio/light/tsl2x7x_core.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/iio/light/tsl2x7x_core.c b/drivers/staging/iio/light/tsl2x7x_core.c index 9e0f2a9..ab338e3 100644 --- a/drivers/staging/iio/light/tsl2x7x_core.c +++ b/drivers/staging/iio/light/tsl2x7x_core.c @@ -667,9 +667,13 @@ static int tsl2x7x_chip_on(struct iio_dev *indio_dev) chip->tsl2x7x_config[TSL2X7X_PRX_COUNT] = chip->tsl2x7x_settings.prox_pulse_count; chip->tsl2x7x_config[TSL2X7X_PRX_MINTHRESHLO] = - chip->tsl2x7x_settings.prox_thres_low; + (chip->tsl2x7x_settings.prox_thres_low) & 0xFF; + chip->tsl2x7x_config[TSL2X7X_PRX_MINTHRESHHI] = + (chip->tsl2x7x_settings.prox_thres_low >> 8) & 0xFF; chip->tsl2x7x_config[TSL2X7X_PRX_MAXTHRESHLO] = - chip->tsl2x7x_settings.prox_thres_high; + (chip->tsl2x7x_settings.prox_thres_high) & 0xFF; + chip->tsl2x7x_config[TSL2X7X_PRX_MAXTHRESHHI] = + (chip->tsl2x7x_settings.prox_thres_high >> 8) & 0xFF; /* and make sure we're not already on */ if (chip->tsl2x7x_chip_status == TSL2X7X_CHIP_WORKING) { -- cgit v1.1 From e0326be0cded13dfc3a24cbeece1f1ae64348a0e Mon Sep 17 00:00:00 2001 From: Paul Kocialkowski Date: Sat, 24 May 2014 13:09:00 +0100 Subject: twl4030-madc: Request processed values in twl4030_get_madc_conversion Not setting the raw parameter in the request causes it to be randomly initialized to a value that might be different from zero or zero. This leads to values that are randomly either raw or processed, making it very difficult to make reliable use of the values. Cc: Stable@vger.kernel.org Signed-off-by: Paul Kocialkowski Acked-by: Sebastian Reichel Signed-off-by: Jonathan Cameron --- drivers/iio/adc/twl4030-madc.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/iio/adc/twl4030-madc.c b/drivers/iio/adc/twl4030-madc.c index 7de1c4c..eb86786 100644 --- a/drivers/iio/adc/twl4030-madc.c +++ b/drivers/iio/adc/twl4030-madc.c @@ -645,6 +645,7 @@ int twl4030_get_madc_conversion(int channel_no) req.channels = (1 << channel_no); req.method = TWL4030_MADC_SW2; req.active = 0; + req.raw = 0; req.func_cb = NULL; ret = twl4030_madc_conversion(&req); if (ret < 0) -- cgit v1.1 From 6d4eed9e8e31a855ea6e6969562774e15f7a6849 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Tue, 6 May 2014 21:48:00 +0100 Subject: staging/iio: IIO_SIMPLE_DUMMY_BUFFER neds IIO_BUFFER An obviously missing 'select' statement, without this we get a link error Signed-off-by: Arnd Bergmann Cc: Jonathan Cameron Cc: linux-iio@vger.kernel.org Signed-off-by: Jonathan Cameron --- drivers/staging/iio/Kconfig | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/iio/Kconfig b/drivers/staging/iio/Kconfig index b36feb0..fa38be0 100644 --- a/drivers/staging/iio/Kconfig +++ b/drivers/staging/iio/Kconfig @@ -36,10 +36,11 @@ config IIO_SIMPLE_DUMMY_EVENTS Add some dummy events to the simple dummy driver. config IIO_SIMPLE_DUMMY_BUFFER - boolean "Buffered capture support" - select IIO_KFIFO_BUF - help - Add buffered data capture to the simple dummy driver. + boolean "Buffered capture support" + select IIO_BUFFER + select IIO_KFIFO_BUF + help + Add buffered data capture to the simple dummy driver. endif # IIO_SIMPLE_DUMMY -- cgit v1.1 From 8ba42fb7b17649c9ab5b5e79d4e90370a0b4645e Mon Sep 17 00:00:00 2001 From: Peter Meerwald Date: Tue, 6 May 2014 09:53:00 +0100 Subject: iio: Fix endianness issue in ak8975_read_axis() i2c_smbus_read_word_data() does host endian conversion already, no need for le16_to_cpu() Signed-off-by: Peter Meerwald Signed-off-by: Jonathan Cameron Cc: Stable@vger.kernel.org --- drivers/iio/magnetometer/ak8975.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/magnetometer/ak8975.c b/drivers/iio/magnetometer/ak8975.c index 74866d1..2a524ac 100644 --- a/drivers/iio/magnetometer/ak8975.c +++ b/drivers/iio/magnetometer/ak8975.c @@ -352,8 +352,6 @@ static int ak8975_read_axis(struct iio_dev *indio_dev, int index, int *val) { struct ak8975_data *data = iio_priv(indio_dev); struct i2c_client *client = data->client; - u16 meas_reg; - s16 raw; int ret; mutex_lock(&data->lock); @@ -401,16 +399,11 @@ static int ak8975_read_axis(struct iio_dev *indio_dev, int index, int *val) dev_err(&client->dev, "Read axis data fails\n"); goto exit; } - meas_reg = ret; mutex_unlock(&data->lock); - /* Endian conversion of the measured values. */ - raw = (s16) (le16_to_cpu(meas_reg)); - /* Clamp to valid range. */ - raw = clamp_t(s16, raw, -4096, 4095); - *val = raw; + *val = clamp_t(s16, ret, -4096, 4095); return IIO_VAL_INT; exit: -- cgit v1.1 From 19bc4981a213d0c5b0e1e8b08815c0b26f01ec54 Mon Sep 17 00:00:00 2001 From: Robert Hodaszi Date: Mon, 6 Oct 2014 14:41:00 +0100 Subject: iio: mxs-lradc: fix divider All channels' single measurement are happening on CH 0. So enabling / disabling the divider once is not enough, because it has impact on all channels. Set only a flag, then check this on each measurement, and enable / disable the divider as required. Signed-off-by: Robert Hodaszi Cc: Stable@vger.kernel.org Acked-by: Alexandre Belloni Acked-by: Marek Vasut Signed-off-by: Jonathan Cameron --- drivers/staging/iio/adc/mxs-lradc.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/staging/iio/adc/mxs-lradc.c b/drivers/staging/iio/adc/mxs-lradc.c index dae8d1a..52d7517 100644 --- a/drivers/staging/iio/adc/mxs-lradc.c +++ b/drivers/staging/iio/adc/mxs-lradc.c @@ -846,6 +846,14 @@ static int mxs_lradc_read_single(struct iio_dev *iio_dev, int chan, int *val) LRADC_CTRL1); mxs_lradc_reg_clear(lradc, 0xff, LRADC_CTRL0); + /* Enable / disable the divider per requirement */ + if (test_bit(chan, &lradc->is_divided)) + mxs_lradc_reg_set(lradc, 1 << LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET, + LRADC_CTRL2); + else + mxs_lradc_reg_clear(lradc, + 1 << LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET, LRADC_CTRL2); + /* Clean the slot's previous content, then set new one. */ mxs_lradc_reg_clear(lradc, LRADC_CTRL4_LRADCSELECT_MASK(0), LRADC_CTRL4); @@ -961,15 +969,11 @@ static int mxs_lradc_write_raw(struct iio_dev *iio_dev, if (val == scale_avail[MXS_LRADC_DIV_DISABLED].integer && val2 == scale_avail[MXS_LRADC_DIV_DISABLED].nano) { /* divider by two disabled */ - writel(1 << LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET, - lradc->base + LRADC_CTRL2 + STMP_OFFSET_REG_CLR); clear_bit(chan->channel, &lradc->is_divided); ret = 0; } else if (val == scale_avail[MXS_LRADC_DIV_ENABLED].integer && val2 == scale_avail[MXS_LRADC_DIV_ENABLED].nano) { /* divider by two enabled */ - writel(1 << LRADC_CTRL2_DIVIDE_BY_TWO_OFFSET, - lradc->base + LRADC_CTRL2 + STMP_OFFSET_REG_SET); set_bit(chan->channel, &lradc->is_divided); ret = 0; } -- cgit v1.1 From 4f3bcd878f1d3c730fe00f619b7260c6125d49eb Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Thu, 6 Nov 2014 09:13:00 +0000 Subject: iio: adc: at91: signedness bug in at91_adc_get_trigger_value_by_name() at91_adc_get_trigger_value_by_name() was returning -ENOMEM truncated to a positive u8 and that doesn't work. I've changed it to int and refactored it to preserve the error code. Signed-off-by: Dan Carpenter Acked-by: Alexandre Belloni Tested-by: Alexandre Belloni Signed-off-by: Jonathan Cameron Cc: Stable@vger.kernel.org --- drivers/iio/adc/at91_adc.c | 16 ++++++++-------- 1 file changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/adc/at91_adc.c b/drivers/iio/adc/at91_adc.c index 89777ed..be0b2ac 100644 --- a/drivers/iio/adc/at91_adc.c +++ b/drivers/iio/adc/at91_adc.c @@ -322,12 +322,11 @@ static int at91_adc_channel_init(struct iio_dev *idev) return idev->num_channels; } -static u8 at91_adc_get_trigger_value_by_name(struct iio_dev *idev, +static int at91_adc_get_trigger_value_by_name(struct iio_dev *idev, struct at91_adc_trigger *triggers, const char *trigger_name) { struct at91_adc_state *st = iio_priv(idev); - u8 value = 0; int i; for (i = 0; i < st->trigger_number; i++) { @@ -340,15 +339,16 @@ static u8 at91_adc_get_trigger_value_by_name(struct iio_dev *idev, return -ENOMEM; if (strcmp(trigger_name, name) == 0) { - value = triggers[i].value; kfree(name); - break; + if (triggers[i].value == 0) + return -EINVAL; + return triggers[i].value; } kfree(name); } - return value; + return -EINVAL; } static int at91_adc_configure_trigger(struct iio_trigger *trig, bool state) @@ -358,14 +358,14 @@ static int at91_adc_configure_trigger(struct iio_trigger *trig, bool state) struct iio_buffer *buffer = idev->buffer; struct at91_adc_reg_desc *reg = st->registers; u32 status = at91_adc_readl(st, reg->trigger_register); - u8 value; + int value; u8 bit; value = at91_adc_get_trigger_value_by_name(idev, st->trigger_list, idev->trig->name); - if (value == 0) - return -EINVAL; + if (value < 0) + return value; if (state) { st->buffer = kmalloc(idev->scan_bytes, GFP_KERNEL); -- cgit v1.1 From e94f62e79f7f63a68574ee5e76c19837ec12f3db Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Fri, 28 Mar 2014 08:33:00 +0000 Subject: iio: adc: checking for NULL instead of IS_ERR() in probe mcb_request_mem() returns an ERR_PTR(), it doesn't return NULL. Fixes: 74aeac4da66f ('iio: adc: Add MEN 16z188 ADC driver') Signed-off-by: Dan Carpenter Signed-off-by: Jonathan Cameron Cc: Stable@vger.kernel.org --- drivers/iio/adc/men_z188_adc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/iio/adc/men_z188_adc.c b/drivers/iio/adc/men_z188_adc.c index 6989c16..b58d630 100644 --- a/drivers/iio/adc/men_z188_adc.c +++ b/drivers/iio/adc/men_z188_adc.c @@ -121,8 +121,8 @@ static int men_z188_probe(struct mcb_device *dev, indio_dev->num_channels = ARRAY_SIZE(z188_adc_iio_channels); mem = mcb_request_mem(dev, "z188-adc"); - if (!mem) - return -ENOMEM; + if (IS_ERR(mem)) + return PTR_ERR(mem); adc->base = ioremap(mem->start, resource_size(mem)); if (adc->base == NULL) -- cgit v1.1