From bb9ebd4e714385a2592a482845865ef2d58b2868 Mon Sep 17 00:00:00 2001 From: Brian Norris Date: Tue, 31 May 2011 16:31:23 -0700 Subject: mtd: nand: rename NAND_USE_FLASH_BBT Recall the recently added prefix requirements: * "NAND_" for flags in nand.h, used in nand_chip.options * "NAND_BBT_" for flags in bbm.h, used in nand_chip.bbt_options or in nand_bbt_descr.options Thus, I am changing NAND_USE_FLASH_BBT to NAND_BBT_USE_FLASH. Again, this flag is found in bbm.h and so should NOT be used in the "nand_chip.options" field. Signed-off-by: Brian Norris Signed-off-by: Artem Bityutskiy --- drivers/mtd/nand/atmel_nand.c | 2 +- drivers/mtd/nand/autcpu12.c | 4 ++-- drivers/mtd/nand/bcm_umi_nand.c | 2 +- drivers/mtd/nand/cafe_nand.c | 2 +- drivers/mtd/nand/cs553x_nand.c | 2 +- drivers/mtd/nand/davinci_nand.c | 2 +- drivers/mtd/nand/denali.c | 2 +- drivers/mtd/nand/diskonchip.c | 2 +- drivers/mtd/nand/fsl_elbc_nand.c | 2 +- drivers/mtd/nand/mpc5121_nfc.c | 2 +- drivers/mtd/nand/mxc_nand.c | 2 +- drivers/mtd/nand/nand_base.c | 2 +- drivers/mtd/nand/nand_bbt.c | 12 ++++++------ drivers/mtd/nand/nandsim.c | 2 +- drivers/mtd/nand/pasemi_nand.c | 2 +- drivers/mtd/nand/s3c2410.c | 2 +- 16 files changed, 22 insertions(+), 22 deletions(-) (limited to 'drivers') diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index 78d5516..79a7ef2 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -583,7 +583,7 @@ static int __init atmel_nand_probe(struct platform_device *pdev) if (on_flash_bbt) { printk(KERN_INFO "atmel_nand: Use On Flash BBT\n"); - nand_chip->bbt_options |= NAND_USE_FLASH_BBT; + nand_chip->bbt_options |= NAND_BBT_USE_FLASH; } if (!cpu_has_dma()) diff --git a/drivers/mtd/nand/autcpu12.c b/drivers/mtd/nand/autcpu12.c index adf934d..2e42ec2 100644 --- a/drivers/mtd/nand/autcpu12.c +++ b/drivers/mtd/nand/autcpu12.c @@ -172,9 +172,9 @@ static int __init autcpu12_init(void) /* Enable the following for a flash based bad block table */ /* - this->bbt_options = NAND_USE_FLASH_BBT; + this->bbt_options = NAND_BBT_USE_FLASH; */ - this->bbt_options = NAND_USE_FLASH_BBT; + this->bbt_options = NAND_BBT_USE_FLASH; /* Scan to find existence of the device */ if (nand_scan(autcpu12_mtd, 1)) { diff --git a/drivers/mtd/nand/bcm_umi_nand.c b/drivers/mtd/nand/bcm_umi_nand.c index 974d9bc..e3ffc4c 100644 --- a/drivers/mtd/nand/bcm_umi_nand.c +++ b/drivers/mtd/nand/bcm_umi_nand.c @@ -474,7 +474,7 @@ static int __devinit bcm_umi_nand_probe(struct platform_device *pdev) #if NAND_ECC_BCH if (board_mtd->writesize > 512) { - if (this->bbt_options & NAND_USE_FLASH_BBT) + if (this->bbt_options & NAND_BBT_USE_FLASH) largepage_bbt.options = NAND_BBT_SCAN2NDPAGE; this->badblock_pattern = &largepage_bbt; } diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c index 7dd7d84..d0eed49 100644 --- a/drivers/mtd/nand/cafe_nand.c +++ b/drivers/mtd/nand/cafe_nand.c @@ -686,7 +686,7 @@ static int __devinit cafe_nand_probe(struct pci_dev *pdev, cafe->nand.chip_delay = 0; /* Enable the following for a flash based bad block table */ - cafe->nand.bbt_options = NAND_USE_FLASH_BBT; + cafe->nand.bbt_options = NAND_BBT_USE_FLASH; cafe->nand.options = NAND_NO_AUTOINCR | NAND_OWN_BUFFERS; if (skipbbt) { diff --git a/drivers/mtd/nand/cs553x_nand.c b/drivers/mtd/nand/cs553x_nand.c index 05adedd..b354961 100644 --- a/drivers/mtd/nand/cs553x_nand.c +++ b/drivers/mtd/nand/cs553x_nand.c @@ -239,7 +239,7 @@ static int __init cs553x_init_one(int cs, int mmio, unsigned long adr) this->ecc.correct = nand_correct_data; /* Enable the following for a flash based bad block table */ - this->bbt_options = NAND_USE_FLASH_BBT; + this->bbt_options = NAND_BBT_USE_FLASH; this->options = NAND_NO_AUTOINCR; /* Scan to find existence of the device */ diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c index 69f7019..a4c82b4 100644 --- a/drivers/mtd/nand/davinci_nand.c +++ b/drivers/mtd/nand/davinci_nand.c @@ -581,7 +581,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev) info->chip.chip_delay = 0; info->chip.select_chip = nand_davinci_select_chip; - /* options such as NAND_USE_FLASH_BBT */ + /* options such as NAND_BBT_USE_FLASH */ info->chip.bbt_options = pdata->bbt_options; /* options such as 16-bit widths */ info->chip.options = pdata->options; diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c index dbb6fba..ee30145 100644 --- a/drivers/mtd/nand/denali.c +++ b/drivers/mtd/nand/denali.c @@ -1577,7 +1577,7 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) denali->nand.bbt_md = &bbt_mirror_descr; /* skip the scan for now until we have OOB read and write support */ - denali->nand.bbt_options |= NAND_USE_FLASH_BBT; + denali->nand.bbt_options |= NAND_BBT_USE_FLASH; denali->nand.options |= NAND_SKIP_BBTSCAN; denali->nand.ecc.mode = NAND_ECC_HW_SYNDROME; diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c index f70bc73..b657d7f 100644 --- a/drivers/mtd/nand/diskonchip.c +++ b/drivers/mtd/nand/diskonchip.c @@ -1652,7 +1652,7 @@ static int __init doc_probe(unsigned long physadr) nand->ecc.mode = NAND_ECC_HW_SYNDROME; nand->ecc.size = 512; nand->ecc.bytes = 6; - nand->bbt_options = NAND_USE_FLASH_BBT; + nand->bbt_options = NAND_BBT_USE_FLASH; doc->physadr = physadr; doc->virtadr = virtadr; diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c index bff4791..d4ea5fe 100644 --- a/drivers/mtd/nand/fsl_elbc_nand.c +++ b/drivers/mtd/nand/fsl_elbc_nand.c @@ -792,7 +792,7 @@ static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv) /* set up nand options */ chip->options = NAND_NO_READRDY | NAND_NO_AUTOINCR; - chip->bbt_options = NAND_USE_FLASH_BBT; + chip->bbt_options = NAND_BBT_USE_FLASH; chip->controller = &elbc_fcm_ctrl->controller; chip->priv = priv; diff --git a/drivers/mtd/nand/mpc5121_nfc.c b/drivers/mtd/nand/mpc5121_nfc.c index 0ac64b5..2f2c35a 100644 --- a/drivers/mtd/nand/mpc5121_nfc.c +++ b/drivers/mtd/nand/mpc5121_nfc.c @@ -736,7 +736,7 @@ static int __devinit mpc5121_nfc_probe(struct platform_device *op) chip->verify_buf = mpc5121_nfc_verify_buf; chip->select_chip = mpc5121_nfc_select_chip; chip->options = NAND_NO_AUTOINCR; - chip->bbt_options = NAND_USE_FLASH_BBT; + chip->bbt_options = NAND_BBT_USE_FLASH; chip->ecc.mode = NAND_ECC_SOFT; /* Support external chip-select logic on ADS5121 board */ diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index ed68fde3..ca42c8f 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -1179,7 +1179,7 @@ static int __init mxcnd_probe(struct platform_device *pdev) this->bbt_td = &bbt_main_descr; this->bbt_md = &bbt_mirror_descr; /* update flash based bbt */ - this->bbt_options |= NAND_USE_FLASH_BBT; + this->bbt_options |= NAND_BBT_USE_FLASH; } init_completion(&host->op_completion); diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index d39dffe..422e787 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -405,7 +405,7 @@ static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs) chip->bbt[block >> 2] |= 0x01 << ((block & 0x03) << 1); /* Do we have a flash based bad block table ? */ - if (chip->bbt_options & NAND_USE_FLASH_BBT) + if (chip->bbt_options & NAND_BBT_USE_FLASH) ret = nand_update_bbt(mtd, ofs); else { nand_get_device(chip, mtd, FL_WRITING); diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c index 66f93e2..dfea9fd 100644 --- a/drivers/mtd/nand/nand_bbt.c +++ b/drivers/mtd/nand/nand_bbt.c @@ -14,7 +14,7 @@ * * When nand_scan_bbt is called, then it tries to find the bad block table * depending on the options in the BBT descriptor(s). If no flash based BBT - * (NAND_USE_FLASH_BBT) is specified then the device is scanned for factory + * (NAND_BBT_USE_FLASH) is specified then the device is scanned for factory * marked good / bad blocks. This information is used to create a memory BBT. * Once a new bad block is discovered then the "factory" information is updated * on the device. @@ -36,7 +36,7 @@ * The table is marked in the OOB area with an ident pattern and a version * number which indicates which of both tables is more up to date. If the NAND * controller needs the complete OOB area for the ECC information then the - * option NAND_BBT_NO_OOB should be used (along with NAND_USE_FLASH_BBT, of + * option NAND_BBT_NO_OOB should be used (along with NAND_BBT_USE_FLASH, of * course): it moves the ident pattern and the version byte into the data area * and the OOB area will remain untouched. * @@ -1083,14 +1083,14 @@ static void verify_bbt_descr(struct mtd_info *mtd, struct nand_bbt_descr *bd) bits = bd->options & NAND_BBT_NRBITS_MSK; BUG_ON((this->bbt_options & NAND_BBT_NO_OOB) && - !(this->bbt_options & NAND_USE_FLASH_BBT)); + !(this->bbt_options & NAND_BBT_USE_FLASH)); BUG_ON(!bits); if (bd->options & NAND_BBT_VERSION) pattern_len++; if (bd->options & NAND_BBT_NO_OOB) { - BUG_ON(!(this->bbt_options & NAND_USE_FLASH_BBT)); + BUG_ON(!(this->bbt_options & NAND_BBT_USE_FLASH)); BUG_ON(!(this->bbt_options & NAND_BBT_NO_OOB)); BUG_ON(bd->offs); if (bd->options & NAND_BBT_VERSION) @@ -1357,12 +1357,12 @@ int nand_default_bbt(struct mtd_info *mtd) this->bbt_td = &bbt_main_descr; this->bbt_md = &bbt_mirror_descr; } - this->bbt_options |= NAND_USE_FLASH_BBT; + this->bbt_options |= NAND_BBT_USE_FLASH; return nand_scan_bbt(mtd, &agand_flashbased); } /* Is a flash based bad block table requested ? */ - if (this->bbt_options & NAND_USE_FLASH_BBT) { + if (this->bbt_options & NAND_BBT_USE_FLASH) { /* Use the default pattern descriptors */ if (!this->bbt_td) { if (this->bbt_options & NAND_BBT_NO_OOB) { diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c index 1856c42..34c03be 100644 --- a/drivers/mtd/nand/nandsim.c +++ b/drivers/mtd/nand/nandsim.c @@ -2275,7 +2275,7 @@ static int __init ns_init_module(void) case 2: chip->bbt_options |= NAND_BBT_NO_OOB; case 1: - chip->bbt_options |= NAND_USE_FLASH_BBT; + chip->bbt_options |= NAND_BBT_USE_FLASH; case 0: break; default: diff --git a/drivers/mtd/nand/pasemi_nand.c b/drivers/mtd/nand/pasemi_nand.c index 1c17f09..a97264e 100644 --- a/drivers/mtd/nand/pasemi_nand.c +++ b/drivers/mtd/nand/pasemi_nand.c @@ -156,7 +156,7 @@ static int __devinit pasemi_nand_probe(struct platform_device *ofdev) /* Enable the following for a flash based bad block table */ chip->options = NAND_NO_AUTOINCR; - chip->bbt_options = NAND_USE_FLASH_BBT; + chip->bbt_options = NAND_BBT_USE_FLASH; /* Scan to find existence of the device */ if (nand_scan(pasemi_nand_mtd, 1)) { diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c index 370516c..ec28079 100644 --- a/drivers/mtd/nand/s3c2410.c +++ b/drivers/mtd/nand/s3c2410.c @@ -881,7 +881,7 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info, * let the kernel fish out the BBT from the NAND, and also skip the * full NAND scan that can take 1/2s or so. Little things... */ if (set->flash_bbt) { - chip->bbt_options |= NAND_USE_FLASH_BBT; + chip->bbt_options |= NAND_BBT_USE_FLASH; chip->options |= NAND_SKIP_BBTSCAN; } } -- cgit v1.1