From 9ee51f01eee84a108510ac2794b9a9dff8be6d3f Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Thu, 11 Apr 2013 02:04:48 +0200 Subject: tty: serial/samsung: make register definitions global The registers for the Samsung S3C serial port are currently defined in the platform specific arch/arm/plat-samsung/include/plat/regs-serial.h file, which is not visible to multiplatform capable drivers. Unfortunately, it is not possible to move the file into a more local place as we should normally try to, because the same registers may be used in one of four places: * In the driver itself * In platform-independent ARM code for early debug output * In platform_data definitions * In the Samsung platform power management code I have also found no way to logically split out a platform_data file, other than possibly move everything into include/linux/platform_data, which also felt wrong. The only part of this file that makes sense to keep specific to the s3c24xx platform are the virtual and physical addresses defined here, which are needed in no other location. Signed-off-by: Arnd Bergmann Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/samsung.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index e91378b..6a36956 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -39,6 +39,7 @@ #include #include #include +#include #include #include #include @@ -46,10 +47,9 @@ #include -#include - -#include +#ifdef CONFIG_SAMSUNG_CLOCK #include +#endif #include "samsung.h" -- cgit v1.1