From 8db9e29fe540c9640ea60f37ecf99d3a73bd12c5 Mon Sep 17 00:00:00 2001 From: Alexandre Belloni Date: Fri, 14 Mar 2014 15:19:08 +0100 Subject: pwm: atmel: Fix polarity handling When atmel_pwm_config() calculates and then sets the prescaler, it is overwriting the channel's CMR register so we are losing the CPOL configuration. As atmel_pwm_config() is always called before enabling a channel, inverting the polarity doesn't work. Fix that by reading CMR first and only overwriting the prescaler bits. Signed-off-by: Alexandre Belloni Acked-by: Nicolas Ferre Signed-off-by: Thierry Reding --- drivers/pwm/pwm-atmel.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/pwm/pwm-atmel.c b/drivers/pwm/pwm-atmel.c index bf4144a..2d69e9c 100644 --- a/drivers/pwm/pwm-atmel.c +++ b/drivers/pwm/pwm-atmel.c @@ -32,6 +32,7 @@ /* Bit field in CMR */ #define PWM_CMR_CPOL (1 << 9) #define PWM_CMR_UPD_CDTY (1 << 10) +#define PWM_CMR_CPRE_MSK 0xF /* The following registers for PWM v1 */ #define PWMV1_CDTY 0x04 @@ -104,6 +105,7 @@ static int atmel_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, unsigned long clk_rate, prd, dty; unsigned long long div; unsigned int pres = 0; + u32 val; int ret; if (test_bit(PWMF_ENABLED, &pwm->flags) && (period_ns != pwm->period)) { @@ -139,7 +141,10 @@ static int atmel_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm, return ret; } - atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWM_CMR, pres); + /* It is necessary to preserve CPOL, inside CMR */ + val = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm, PWM_CMR); + val = (val & ~PWM_CMR_CPRE_MSK) | (pres & PWM_CMR_CPRE_MSK); + atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWM_CMR, val); atmel_pwm->config(chip, pwm, dty, prd); clk_disable(atmel_pwm->clk); -- cgit v1.1