From 8369d5fa63260cc54464b4687aa6a0f78402d98e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 22 May 2009 16:23:36 +0200 Subject: ide: fix 40-wire cable detection for TSST SH-S202* ATAPI devices (v2) Since 2.6.26 we support UDMA66 on ATAPI devices requiring IVB quirk: commit 8588a2b732928b343233af9b1855705b8286bed4 ("ide: add SH-S202J to ivb_list[]") We also later added support for more such devices in: commit e97564f362a93f8c248246c19828895950341252 ("ide: More TSST drives with broken cable detection") and in: commit 3ced5c49bd2d1f2c7f769e3a54385883de63a652 ("ide: add TSSTcorp CDDVDW SH-S202H to ivb_list[]") It turns out that such devices lack cable detection altogether (which in turn results in incorrect detection of 40-wire cables by our current cable detection strategy) so always handle them by trusting host-side cable detection only. v2: Model detection fixup from Martin. Reported-and-tested-by: Martin Lottermoser Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-iops.c | 21 +++++++++++++++++---- 1 file changed, 17 insertions(+), 4 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index c19a221..06fe002 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -206,8 +206,6 @@ EXPORT_SYMBOL_GPL(ide_in_drive_list); /* * Early UDMA66 devices don't set bit14 to 1, only bit13 is valid. - * We list them here and depend on the device side cable detection for them. - * * Some optical devices with the buggy firmwares have the same problem. */ static const struct drive_list_entry ivb_list[] = { @@ -251,10 +249,25 @@ u8 eighty_ninty_three(ide_drive_t *drive) * - force bit13 (80c cable present) check also for !ivb devices * (unless the slave device is pre-ATA3) */ - if ((id[ATA_ID_HW_CONFIG] & 0x4000) || - (ivb && (id[ATA_ID_HW_CONFIG] & 0x2000))) + if (id[ATA_ID_HW_CONFIG] & 0x4000) return 1; + if (ivb) { + const char *model = (char *)&id[ATA_ID_PROD]; + + if (strstr(model, "TSSTcorp CDDVDW SH-S202")) { + /* + * These ATAPI devices always report 80c cable + * so we have to depend on the host in this case. + */ + if (hwif->cbl == ATA_CBL_PATA80) + return 1; + } else { + /* Depend on the device side cable detection. */ + if (id[ATA_ID_HW_CONFIG] & 0x2000) + return 1; + } + } no_80w: if (drive->dev_flags & IDE_DFLAG_UDMA33_WARNED) return 0; -- cgit v1.1 From e3b29f05124b07303088795396ff858811d2acb8 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 22 May 2009 16:23:37 +0200 Subject: ide: fix OOPS during ide-cd error recovery On Tuesday 19 May 2009 20:29:28 Martin Lottermoser wrote: > hdc: cdrom_decode_status: error=0x40 <3>{ LastFailedSense=0x04 } > ide: failed opcode was: unknown > hdc: DMA disabled > ------------[ cut here ]------------ > kernel BUG at drivers/ide/ide-io.c:872! It is possible for ide-cd to ignore ide_error()'s return value under some circumstances. Workaround it in ide_intr() and ide_timer_expiry() by checking if there is a device/port reset pending currently. Fixes bug #13345: http://bugzilla.kernel.org/show_bug.cgi?id=13345 Reported-by: Martin Lottermoser Reported-and-tested-by: Modestas Vainius Cc: Borislav Petkov Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-io.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 35dc38d..6415a2e 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -696,7 +696,7 @@ void ide_timer_expiry (unsigned long data) } spin_lock_irq(&hwif->lock); enable_irq(hwif->irq); - if (startstop == ide_stopped) { + if (startstop == ide_stopped && hwif->polling == 0) { ide_unlock_port(hwif); plug_device = 1; } @@ -868,7 +868,7 @@ irqreturn_t ide_intr (int irq, void *dev_id) * same irq as is currently being serviced here, and Linux * won't allow another of the same (on any CPU) until we return. */ - if (startstop == ide_stopped) { + if (startstop == ide_stopped && hwif->polling == 0) { BUG_ON(hwif->handler); ide_unlock_port(hwif); plug_device = 1; -- cgit v1.1 From 26bfcf21e25fa090f099fa0ccf201424989cbd7b Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 22 May 2009 16:23:37 +0200 Subject: ide: fix printk() levels in ide_dump_ata[pi]_error() Fixes "<3>" in error messages like this one: hdc: cdrom_decode_status: error=0x40 <3>{ LastFailedSense=0x04 } Reported-by: Martin Lottermoser Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-lib.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index 56ff8c4..85b9bae 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -91,7 +91,7 @@ static void ide_dump_sector(ide_drive_t *drive) static void ide_dump_ata_error(ide_drive_t *drive, u8 err) { - printk(KERN_ERR "{ "); + printk(KERN_CONT "{ "); if (err & ATA_ABORTED) printk(KERN_CONT "DriveStatusError "); if (err & ATA_ICRC) @@ -121,7 +121,7 @@ static void ide_dump_ata_error(ide_drive_t *drive, u8 err) static void ide_dump_atapi_error(ide_drive_t *drive, u8 err) { - printk(KERN_ERR "{ "); + printk(KERN_CONT "{ "); if (err & ATAPI_ILI) printk(KERN_CONT "IllegalLengthIndication "); if (err & ATAPI_EOM) -- cgit v1.1 From cc30137a221372c67a943ad9ea68121a2bd57a6e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 22 May 2009 16:23:38 +0200 Subject: ide: improve failed opcode reporting Nowadays we (almost) always store the currently executing command in hwif->cmd so we can use it for the failed opcode reporting. Cc: Martin Lottermoser Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-lib.c | 23 ++++------------------- 1 file changed, 4 insertions(+), 19 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index 85b9bae..2148df8 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -31,24 +31,6 @@ void ide_toggle_bounce(ide_drive_t *drive, int on) blk_queue_bounce_limit(drive->queue, addr); } -static void ide_dump_opcode(ide_drive_t *drive) -{ - struct request *rq = drive->hwif->rq; - struct ide_cmd *cmd = NULL; - - if (!rq) - return; - - if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) - cmd = rq->special; - - printk(KERN_ERR "ide: failed opcode was: "); - if (cmd == NULL) - printk(KERN_CONT "unknown\n"); - else - printk(KERN_CONT "0x%02x\n", cmd->tf.command); -} - u64 ide_get_lba_addr(struct ide_cmd *cmd, int lba48) { struct ide_taskfile *tf = &cmd->tf; @@ -179,7 +161,10 @@ u8 ide_dump_status(ide_drive_t *drive, const char *msg, u8 stat) else ide_dump_atapi_error(drive, err); } - ide_dump_opcode(drive); + + printk(KERN_ERR "%s: possibly failed opcode: 0x%02x\n", + drive->name, drive->hwif->cmd.tf.command); + return err; } EXPORT_SYMBOL(ide_dump_status); -- cgit v1.1 From 28ee9bc5cc42776e0364399b401a64906ac1ac8e Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Fri, 22 May 2009 16:23:38 +0200 Subject: ide: report timeouts in ide_busy_sleep() * change 'hwif' argument to 'drive' * report an error on timeout Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/ide-probe.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 7f264ed..c895ed5 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -295,7 +295,7 @@ int ide_dev_read_id(ide_drive_t *drive, u8 cmd, u16 *id) timeout = ((cmd == ATA_CMD_ID_ATA) ? WAIT_WORSTCASE : WAIT_PIDENTIFY) / 2; - if (ide_busy_sleep(hwif, timeout, use_altstatus)) + if (ide_busy_sleep(drive, timeout, use_altstatus)) return 1; /* wait for IRQ and ATA_DRQ */ @@ -316,8 +316,9 @@ int ide_dev_read_id(ide_drive_t *drive, u8 cmd, u16 *id) return rc; } -int ide_busy_sleep(ide_hwif_t *hwif, unsigned long timeout, int altstatus) +int ide_busy_sleep(ide_drive_t *drive, unsigned long timeout, int altstatus) { + ide_hwif_t *hwif = drive->hwif; u8 stat; timeout += jiffies; @@ -330,6 +331,8 @@ int ide_busy_sleep(ide_hwif_t *hwif, unsigned long timeout, int altstatus) return 0; } while (time_before(jiffies, timeout)); + printk(KERN_ERR "%s: timeout in %s\n", drive->name, __func__); + return 1; /* drive timed-out */ } @@ -420,7 +423,7 @@ static int do_probe (ide_drive_t *drive, u8 cmd) tp_ops->dev_select(drive); msleep(50); tp_ops->exec_command(hwif, ATA_CMD_DEV_RESET); - (void)ide_busy_sleep(hwif, WAIT_WORSTCASE, 0); + (void)ide_busy_sleep(drive, WAIT_WORSTCASE, 0); rc = ide_dev_read_id(drive, cmd, id); } -- cgit v1.1 From 5993856e53fbc4b4f28e2d481deaebeb715b1267 Mon Sep 17 00:00:00 2001 From: Harald Welte Date: Fri, 22 May 2009 16:23:39 +0200 Subject: via82cxxx: Add VIA VX855 PCI Device ID This patch adds the PCI Device ID 0xc409 to the PCI ID table of via82cxxx.c, as well as the 0x8409 south bridge ID. This is required to make the IDE driver work on the VX855/VX875 integrated chipset. Signed-off-by: Harald Welte Cc: Joseph Chan Cc: Bruce Chang Signed-off-by: Bartlomiej Zolnierkiewicz --- drivers/ide/via82cxxx.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers') diff --git a/drivers/ide/via82cxxx.c b/drivers/ide/via82cxxx.c index 3ff7231..028de26 100644 --- a/drivers/ide/via82cxxx.c +++ b/drivers/ide/via82cxxx.c @@ -67,6 +67,7 @@ static struct via_isa_bridge { u8 udma_mask; u8 flags; } via_isa_bridges[] = { + { "vx855", PCI_DEVICE_ID_VIA_VX855, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, { "vx800", PCI_DEVICE_ID_VIA_VX800, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST }, @@ -474,6 +475,7 @@ static const struct pci_device_id via_pci_tbl[] = { { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C576_1), 0 }, { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C586_1), 0 }, { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_CX700_IDE), 0 }, + { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_VX855_IDE), 0 }, { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_6410), 1 }, { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_SATA_EIDE), 1 }, { 0, }, -- cgit v1.1