From 4a3fad709bbc74c85fffff8903d17b5e35723365 Mon Sep 17 00:00:00 2001 From: Mauro Carvalho Chehab Date: Thu, 4 Jan 2018 06:47:28 -0500 Subject: media: fix usage of whitespaces and on indentation On several places, whitespaces are being used for indentation, or even at the end of the line. Fix them. Signed-off-by: Mauro Carvalho Chehab --- drivers/media/Kconfig | 8 ++--- drivers/media/dvb-core/Makefile | 2 +- drivers/media/dvb-core/dvb_ca_en50221.c | 2 +- drivers/media/dvb-frontends/cx24116.c | 2 +- drivers/media/dvb-frontends/drx39xyj/drxj.c | 2 +- drivers/media/dvb-frontends/drxk.h | 6 ++-- drivers/media/dvb-frontends/mb86a20s.c | 2 +- drivers/media/dvb-frontends/mn88473.c | 2 +- drivers/media/dvb-frontends/tda18271c2dd.h | 4 +-- drivers/media/i2c/Kconfig | 10 +++---- drivers/media/i2c/adv7343.c | 2 +- drivers/media/i2c/adv7393.c | 2 +- drivers/media/i2c/cx25840/cx25840-core.c | 6 ++-- drivers/media/i2c/cx25840/cx25840-ir.c | 4 +-- drivers/media/i2c/smiapp/smiapp-core.c | 2 +- drivers/media/i2c/tvp5150_reg.h | 4 +-- drivers/media/pci/cx18/cx18-fileops.c | 2 +- drivers/media/pci/cx18/cx18-streams.c | 2 +- drivers/media/pci/cx23885/cx23888-ir.c | 4 +-- drivers/media/pci/ivtv/ivtv-cards.c | 2 +- drivers/media/pci/pluto2/pluto2.c | 2 +- drivers/media/pci/pt1/pt1.c | 2 +- drivers/media/pci/pt1/va1j5jf8007s.c | 2 +- drivers/media/pci/pt1/va1j5jf8007s.h | 2 +- drivers/media/pci/pt1/va1j5jf8007t.c | 2 +- drivers/media/pci/pt1/va1j5jf8007t.h | 2 +- drivers/media/pci/saa7146/mxb.c | 2 +- drivers/media/pci/tw5864/tw5864-video.c | 2 +- drivers/media/platform/Kconfig | 38 ++++++++++++------------ drivers/media/platform/arv.c | 4 +-- drivers/media/platform/blackfin/ppi.c | 2 +- drivers/media/platform/davinci/dm355_ccdc.c | 4 +-- drivers/media/platform/davinci/dm644x_ccdc.c | 6 ++-- drivers/media/platform/davinci/vpfe_capture.c | 6 ++-- drivers/media/platform/exynos4-is/fimc-core.h | 2 +- drivers/media/platform/exynos4-is/fimc-lite.h | 4 +-- drivers/media/platform/mtk-vcodec/vdec_vpu_if.h | 2 +- drivers/media/platform/omap3isp/isp.c | 2 +- drivers/media/platform/sti/hva/hva.h | 2 +- drivers/media/platform/via-camera.h | 2 +- drivers/media/radio/radio-maxiradio.c | 2 +- drivers/media/radio/radio-mr800.c | 24 +++++++-------- drivers/media/radio/si470x/radio-si470x-common.c | 24 +++++++-------- drivers/media/radio/wl128x/fmdrv_common.h | 10 +++---- drivers/media/rc/Kconfig | 8 ++--- drivers/media/tuners/mt2063.c | 4 +-- drivers/media/tuners/si2157.c | 2 +- drivers/media/tuners/tuner-i2c.h | 2 +- drivers/media/usb/as102/as10x_cmd_cfg.c | 6 ++-- drivers/media/usb/cx231xx/cx231xx-avcore.c | 2 +- drivers/media/usb/em28xx/Kconfig | 14 ++++----- drivers/media/usb/gspca/autogain_functions.c | 12 ++++---- drivers/media/usb/gspca/cpia1.c | 2 +- drivers/media/usb/gspca/stv06xx/stv06xx.h | 2 +- drivers/media/usb/pvrusb2/pvrusb2-devattr.c | 12 ++++---- drivers/media/usb/tm6000/tm6000.h | 2 +- drivers/media/usb/usbtv/Kconfig | 16 +++++----- drivers/media/v4l2-core/Kconfig | 4 +-- drivers/media/v4l2-core/v4l2-compat-ioctl32.c | 2 +- drivers/media/v4l2-core/v4l2-dv-timings.c | 2 +- 60 files changed, 156 insertions(+), 156 deletions(-) (limited to 'drivers') diff --git a/drivers/media/Kconfig b/drivers/media/Kconfig index 3f69b94..145e12b 100644 --- a/drivers/media/Kconfig +++ b/drivers/media/Kconfig @@ -80,11 +80,11 @@ config MEDIA_SDR_SUPPORT config MEDIA_CEC_SUPPORT bool "HDMI CEC support" ---help--- - Enable support for HDMI CEC (Consumer Electronics Control), - which is an optional HDMI feature. + Enable support for HDMI CEC (Consumer Electronics Control), + which is an optional HDMI feature. - Say Y when you have an HDMI receiver, transmitter or a USB CEC - adapter that supports HDMI CEC. + Say Y when you have an HDMI receiver, transmitter or a USB CEC + adapter that supports HDMI CEC. source "drivers/media/cec/Kconfig" diff --git a/drivers/media/dvb-core/Makefile b/drivers/media/dvb-core/Makefile index 3756ccf..05827ee 100644 --- a/drivers/media/dvb-core/Makefile +++ b/drivers/media/dvb-core/Makefile @@ -6,7 +6,7 @@ dvb-net-$(CONFIG_DVB_NET) := dvb_net.o dvb-vb2-$(CONFIG_DVB_MMSP) := dvb_vb2.o -dvb-core-objs := dvbdev.o dmxdev.o dvb_demux.o \ +dvb-core-objs := dvbdev.o dmxdev.o dvb_demux.o \ dvb_ca_en50221.o dvb_frontend.o \ $(dvb-net-y) dvb_ringbuffer.o $(dvb-vb2-y) dvb_math.o diff --git a/drivers/media/dvb-core/dvb_ca_en50221.c b/drivers/media/dvb-core/dvb_ca_en50221.c index 7785804..ca98fa4 100644 --- a/drivers/media/dvb-core/dvb_ca_en50221.c +++ b/drivers/media/dvb-core/dvb_ca_en50221.c @@ -786,7 +786,7 @@ exit: * @ca: CA instance. * @slot: Slot to write to. * @buf: The data in this buffer is treated as a complete link-level packet to - * be written. + * be written. * @bytes_write: Size of ebuf. * * return: Number of bytes written, or < 0 on error. diff --git a/drivers/media/dvb-frontends/cx24116.c b/drivers/media/dvb-frontends/cx24116.c index 0ef5f86..786c56a 100644 --- a/drivers/media/dvb-frontends/cx24116.c +++ b/drivers/media/dvb-frontends/cx24116.c @@ -963,7 +963,7 @@ static int cx24116_send_diseqc_msg(struct dvb_frontend *fe, /* Validate length */ if (d->msg_len > sizeof(d->msg)) - return -EINVAL; + return -EINVAL; /* Dump DiSEqC message */ if (debug) { diff --git a/drivers/media/dvb-frontends/drx39xyj/drxj.c b/drivers/media/dvb-frontends/drx39xyj/drxj.c index 1cc7c03..5706898 100644 --- a/drivers/media/dvb-frontends/drx39xyj/drxj.c +++ b/drivers/media/dvb-frontends/drx39xyj/drxj.c @@ -11727,7 +11727,7 @@ eof: * - In case of UCODE_UPLOAD: I2C error. * - In case of UCODE_VERIFY: I2C error or image on device * is not equal to image provided to this control function. - * -EINVAL: + * -EINVAL: * - Invalid arguments. * - Provided image is corrupt */ diff --git a/drivers/media/dvb-frontends/drxk.h b/drivers/media/dvb-frontends/drxk.h index b16fedb..76466f7 100644 --- a/drivers/media/dvb-frontends/drxk.h +++ b/drivers/media/dvb-frontends/drxk.h @@ -10,7 +10,7 @@ * * @adr: I2C address of the DRX-K * @parallel_ts: True means that the device uses parallel TS, - * Serial otherwise. + * Serial otherwise. * @dynamic_clk: True means that the clock will be dynamically * adjusted. Static clock otherwise. * @enable_merr_cfg: Enable SIO_PDR_PERR_CFG/SIO_PDR_MVAL_CFG. @@ -67,8 +67,8 @@ extern struct dvb_frontend *drxk_attach(const struct drxk_config *config, static inline struct dvb_frontend *drxk_attach(const struct drxk_config *config, struct i2c_adapter *i2c) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); - return NULL; + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; } #endif diff --git a/drivers/media/dvb-frontends/mb86a20s.c b/drivers/media/dvb-frontends/mb86a20s.c index 6ce1b8f..36e9519 100644 --- a/drivers/media/dvb-frontends/mb86a20s.c +++ b/drivers/media/dvb-frontends/mb86a20s.c @@ -2057,7 +2057,7 @@ static void mb86a20s_release(struct dvb_frontend *fe) static int mb86a20s_get_frontend_algo(struct dvb_frontend *fe) { - return DVBFE_ALGO_HW; + return DVBFE_ALGO_HW; } static const struct dvb_frontend_ops mb86a20s_ops; diff --git a/drivers/media/dvb-frontends/mn88473.c b/drivers/media/dvb-frontends/mn88473.c index 5824743..ca72208 100644 --- a/drivers/media/dvb-frontends/mn88473.c +++ b/drivers/media/dvb-frontends/mn88473.c @@ -764,7 +764,7 @@ MODULE_DEVICE_TABLE(i2c, mn88473_id_table); static struct i2c_driver mn88473_driver = { .driver = { - .name = "mn88473", + .name = "mn88473", .suppress_bind_attrs = true, }, .probe = mn88473_probe, diff --git a/drivers/media/dvb-frontends/tda18271c2dd.h b/drivers/media/dvb-frontends/tda18271c2dd.h index 289653d..afeb953 100644 --- a/drivers/media/dvb-frontends/tda18271c2dd.h +++ b/drivers/media/dvb-frontends/tda18271c2dd.h @@ -9,8 +9,8 @@ struct dvb_frontend *tda18271c2dd_attach(struct dvb_frontend *fe, static inline struct dvb_frontend *tda18271c2dd_attach(struct dvb_frontend *fe, struct i2c_adapter *i2c, u8 adr) { - printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); - return NULL; + printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__); + return NULL; } #endif diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig index e2ea1f8..db4ed9b 100644 --- a/drivers/media/i2c/Kconfig +++ b/drivers/media/i2c/Kconfig @@ -777,12 +777,12 @@ config VIDEO_S5K6A3 camera sensor. config VIDEO_S5K4ECGX - tristate "Samsung S5K4ECGX sensor support" - depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API + tristate "Samsung S5K4ECGX sensor support" + depends on I2C && VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API select CRC32 - ---help--- - This is a V4L2 sensor-level driver for Samsung S5K4ECGX 5M - camera sensor with an embedded SoC image signal processor. + ---help--- + This is a V4L2 sensor-level driver for Samsung S5K4ECGX 5M + camera sensor with an embedded SoC image signal processor. config VIDEO_S5K5BAF tristate "Samsung S5K5BAF sensor support" diff --git a/drivers/media/i2c/adv7343.c b/drivers/media/i2c/adv7343.c index 11f9029..4a441ee 100644 --- a/drivers/media/i2c/adv7343.c +++ b/drivers/media/i2c/adv7343.c @@ -100,7 +100,7 @@ static const u8 adv7343_init_reg_val[] = { }; /* - * 2^32 + * 2^32 * FSC(reg) = FSC (HZ) * -------- * 27000000 */ diff --git a/drivers/media/i2c/adv7393.c b/drivers/media/i2c/adv7393.c index f19ad4e..b6234c8 100644 --- a/drivers/media/i2c/adv7393.c +++ b/drivers/media/i2c/adv7393.c @@ -103,7 +103,7 @@ static const u8 adv7393_init_reg_val[] = { }; /* - * 2^32 + * 2^32 * FSC(reg) = FSC (HZ) * -------- * 27000000 */ diff --git a/drivers/media/i2c/cx25840/cx25840-core.c b/drivers/media/i2c/cx25840/cx25840-core.c index 2189980..4a9c137 100644 --- a/drivers/media/i2c/cx25840/cx25840-core.c +++ b/drivers/media/i2c/cx25840/cx25840-core.c @@ -2065,10 +2065,10 @@ static void cx23885_dif_setup(struct i2c_client *client, u32 ifHz) /* Assuming TV */ /* Calculate the PLL frequency word based on the adjusted ifHz */ - pll_freq = div_u64((u64)ifHz * 268435456, 50000000); - pll_freq_word = (u32)pll_freq; + pll_freq = div_u64((u64)ifHz * 268435456, 50000000); + pll_freq_word = (u32)pll_freq; - cx25840_write4(client, DIF_PLL_FREQ_WORD, pll_freq_word); + cx25840_write4(client, DIF_PLL_FREQ_WORD, pll_freq_word); /* Round down to the nearest 100KHz */ ifHz = (ifHz / 100000) * 100000; diff --git a/drivers/media/i2c/cx25840/cx25840-ir.c b/drivers/media/i2c/cx25840/cx25840-ir.c index 9b65c7d..548382b 100644 --- a/drivers/media/i2c/cx25840/cx25840-ir.c +++ b/drivers/media/i2c/cx25840/cx25840-ir.c @@ -131,7 +131,7 @@ static inline struct cx25840_ir_state *to_ir_state(struct v4l2_subdev *sd) * Rx and Tx Clock Divider register computations * * Note the largest clock divider value of 0xffff corresponds to: - * (0xffff + 1) * 1000 / 108/2 MHz = 1,213,629.629... ns + * (0xffff + 1) * 1000 / 108/2 MHz = 1,213,629.629... ns * which fits in 21 bits, so we'll use unsigned int for time arguments. */ static inline u16 count_to_clock_divider(unsigned int d) @@ -187,7 +187,7 @@ static inline unsigned int clock_divider_to_freq(unsigned int divider, * Low Pass Filter register calculations * * Note the largest count value of 0xffff corresponds to: - * 0xffff * 1000 / 108/2 MHz = 1,213,611.11... ns + * 0xffff * 1000 / 108/2 MHz = 1,213,611.11... ns * which fits in 21 bits, so we'll use unsigned int for time arguments. */ static inline u16 count_to_lpf_count(unsigned int d) diff --git a/drivers/media/i2c/smiapp/smiapp-core.c b/drivers/media/i2c/smiapp/smiapp-core.c index e6b717b..3b7ace3 100644 --- a/drivers/media/i2c/smiapp/smiapp-core.c +++ b/drivers/media/i2c/smiapp/smiapp-core.c @@ -1791,7 +1791,7 @@ static int smiapp_set_format_source(struct v4l2_subdev *subdev, if (csi_format->compressed == old_csi_format->compressed) return 0; - valid_link_freqs = + valid_link_freqs = &sensor->valid_link_freqs[sensor->csi_format->compressed - sensor->compressed_min_bpp]; diff --git a/drivers/media/i2c/tvp5150_reg.h b/drivers/media/i2c/tvp5150_reg.h index 654c442..c43b7b8 100644 --- a/drivers/media/i2c/tvp5150_reg.h +++ b/drivers/media/i2c/tvp5150_reg.h @@ -67,10 +67,10 @@ #define VIDEO_STD_NTSC_MJ_BIT_AS 0x01 #define VIDEO_STD_PAL_BDGHIN_BIT_AS 0x03 -#define VIDEO_STD_PAL_M_BIT_AS 0x05 +#define VIDEO_STD_PAL_M_BIT_AS 0x05 #define VIDEO_STD_PAL_COMBINATION_N_BIT_AS 0x07 #define VIDEO_STD_NTSC_4_43_BIT_AS 0x09 -#define VIDEO_STD_SECAM_BIT_AS 0x0b +#define VIDEO_STD_SECAM_BIT_AS 0x0b /* Reserved 29h-2bh */ diff --git a/drivers/media/pci/cx18/cx18-fileops.c b/drivers/media/pci/cx18/cx18-fileops.c index 4f9c239..2dfe91f 100644 --- a/drivers/media/pci/cx18/cx18-fileops.c +++ b/drivers/media/pci/cx18/cx18-fileops.c @@ -633,7 +633,7 @@ unsigned int cx18_v4l2_enc_poll(struct file *filp, poll_table *wait) if (v4l2_event_pending(&id->fh)) res |= POLLPRI; - if (eof && videobuf_poll == POLLERR) + if (eof && videobuf_poll == POLLERR) return res | POLLHUP; return res | videobuf_poll; } diff --git a/drivers/media/pci/cx18/cx18-streams.c b/drivers/media/pci/cx18/cx18-streams.c index f35f78d..b9c6831 100644 --- a/drivers/media/pci/cx18/cx18-streams.c +++ b/drivers/media/pci/cx18/cx18-streams.c @@ -116,7 +116,7 @@ static int cx18_prepare_buffer(struct videobuf_queue *q, unsigned int width, unsigned int height, enum v4l2_field field) { - struct cx18 *cx = s->cx; + struct cx18 *cx = s->cx; int rc = 0; /* check settings */ diff --git a/drivers/media/pci/cx23885/cx23888-ir.c b/drivers/media/pci/cx23885/cx23888-ir.c index 040323b..b0d4e44 100644 --- a/drivers/media/pci/cx23885/cx23888-ir.c +++ b/drivers/media/pci/cx23885/cx23888-ir.c @@ -170,7 +170,7 @@ static inline int cx23888_ir_and_or4(struct cx23885_dev *dev, u32 addr, * Rx and Tx Clock Divider register computations * * Note the largest clock divider value of 0xffff corresponds to: - * (0xffff + 1) * 1000 / 108/2 MHz = 1,213,629.629... ns + * (0xffff + 1) * 1000 / 108/2 MHz = 1,213,629.629... ns * which fits in 21 bits, so we'll use unsigned int for time arguments. */ static inline u16 count_to_clock_divider(unsigned int d) @@ -226,7 +226,7 @@ static inline unsigned int clock_divider_to_freq(unsigned int divider, * Low Pass Filter register calculations * * Note the largest count value of 0xffff corresponds to: - * 0xffff * 1000 / 108/2 MHz = 1,213,611.11... ns + * 0xffff * 1000 / 108/2 MHz = 1,213,611.11... ns * which fits in 21 bits, so we'll use unsigned int for time arguments. */ static inline u16 count_to_lpf_count(unsigned int d) diff --git a/drivers/media/pci/ivtv/ivtv-cards.c b/drivers/media/pci/ivtv/ivtv-cards.c index 410d97b..c637929 100644 --- a/drivers/media/pci/ivtv/ivtv-cards.c +++ b/drivers/media/pci/ivtv/ivtv-cards.c @@ -65,7 +65,7 @@ static struct ivtv_card_tuner_i2c ivtv_i2c_tda8290 = { /********************** card configuration *******************************/ -/* Please add new PCI IDs to: http://pci-ids.ucw.cz/ +/* Please add new PCI IDs to: http://pci-ids.ucw.cz/ This keeps the PCI ID database up to date. Note that the entries must be added under vendor 0x4444 (Conexant) as subsystem IDs. New vendor IDs should still be added to the vendor ID list. */ diff --git a/drivers/media/pci/pluto2/pluto2.c b/drivers/media/pci/pluto2/pluto2.c index ecdca0b..5e6fe68 100644 --- a/drivers/media/pci/pluto2/pluto2.c +++ b/drivers/media/pci/pluto2/pluto2.c @@ -4,7 +4,7 @@ * Copyright (C) 2005 Andreas Oberritter * * based on pluto2.c 1.10 - http://instinct-wp8.no-ip.org/pluto/ - * by Dany Salman + * by Dany Salman * Copyright (c) 2004 TDF * * This program is free software; you can redistribute it and/or modify diff --git a/drivers/media/pci/pt1/pt1.c b/drivers/media/pci/pt1/pt1.c index ac16cf3..4f6867a 100644 --- a/drivers/media/pci/pt1/pt1.c +++ b/drivers/media/pci/pt1/pt1.c @@ -4,7 +4,7 @@ * Copyright (C) 2009 HIRANO Takahito * * based on pt1dvr - http://pt1dvr.sourceforge.jp/ - * by Tomoaki Ishikawa + * by Tomoaki Ishikawa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/media/pci/pt1/va1j5jf8007s.c b/drivers/media/pci/pt1/va1j5jf8007s.c index 2cf7765..f49867a 100644 --- a/drivers/media/pci/pt1/va1j5jf8007s.c +++ b/drivers/media/pci/pt1/va1j5jf8007s.c @@ -4,7 +4,7 @@ * Copyright (C) 2009 HIRANO Takahito * * based on pt1dvr - http://pt1dvr.sourceforge.jp/ - * by Tomoaki Ishikawa + * by Tomoaki Ishikawa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/media/pci/pt1/va1j5jf8007s.h b/drivers/media/pci/pt1/va1j5jf8007s.h index efbe6cc..f8ce560 100644 --- a/drivers/media/pci/pt1/va1j5jf8007s.h +++ b/drivers/media/pci/pt1/va1j5jf8007s.h @@ -4,7 +4,7 @@ * Copyright (C) 2009 HIRANO Takahito * * based on pt1dvr - http://pt1dvr.sourceforge.jp/ - * by Tomoaki Ishikawa + * by Tomoaki Ishikawa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/media/pci/pt1/va1j5jf8007t.c b/drivers/media/pci/pt1/va1j5jf8007t.c index d9788d1..a52984a 100644 --- a/drivers/media/pci/pt1/va1j5jf8007t.c +++ b/drivers/media/pci/pt1/va1j5jf8007t.c @@ -4,7 +4,7 @@ * Copyright (C) 2009 HIRANO Takahito * * based on pt1dvr - http://pt1dvr.sourceforge.jp/ - * by Tomoaki Ishikawa + * by Tomoaki Ishikawa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/media/pci/pt1/va1j5jf8007t.h b/drivers/media/pci/pt1/va1j5jf8007t.h index 6fb119c..95eb7d2 100644 --- a/drivers/media/pci/pt1/va1j5jf8007t.h +++ b/drivers/media/pci/pt1/va1j5jf8007t.h @@ -4,7 +4,7 @@ * Copyright (C) 2009 HIRANO Takahito * * based on pt1dvr - http://pt1dvr.sourceforge.jp/ - * by Tomoaki Ishikawa + * by Tomoaki Ishikawa * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/media/pci/saa7146/mxb.c b/drivers/media/pci/saa7146/mxb.c index 0144f30..2526fc0 100644 --- a/drivers/media/pci/saa7146/mxb.c +++ b/drivers/media/pci/saa7146/mxb.c @@ -3,7 +3,7 @@ Copyright (C) 1998-2006 Michael Hunold - Visit http://www.themm.net/~mihu/linux/saa7146/mxb.html + Visit http://www.themm.net/~mihu/linux/saa7146/mxb.html for further details about this card. This program is free software; you can redistribute it and/or modify diff --git a/drivers/media/pci/tw5864/tw5864-video.c b/drivers/media/pci/tw5864/tw5864-video.c index e7bd2b8..ff2b7da 100644 --- a/drivers/media/pci/tw5864/tw5864-video.c +++ b/drivers/media/pci/tw5864/tw5864-video.c @@ -730,7 +730,7 @@ static int tw5864_frameinterval_get(struct tw5864_input *input, frameinterval->denominator = 25; break; default: - dev_warn(&dev->pci->dev, "tw5864_frameinterval_get requested for unknown std %d\n", + dev_warn(&dev->pci->dev, "tw5864_frameinterval_get requested for unknown std %d\n", input->std); return -EINVAL; } diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig index fd0c998..614fbef 100644 --- a/drivers/media/platform/Kconfig +++ b/drivers/media/platform/Kconfig @@ -353,10 +353,10 @@ config VIDEO_STI_HVA_DEBUGFS depends on DEBUG_FS help Select this to see information about the internal state and the last - operation of STMicroelectronics HVA multi-format video encoder in - debugfs. + operation of STMicroelectronics HVA multi-format video encoder in + debugfs. - Choose N unless you know you need this. + Choose N unless you know you need this. config VIDEO_STI_DELTA tristate "STMicroelectronics DELTA multi-format video decoder V4L2 driver" @@ -586,10 +586,10 @@ config VIDEO_SAMSUNG_S5P_CEC select CEC_CORE select CEC_NOTIFIER ---help--- - This is a driver for Samsung S5P HDMI CEC interface. It uses the - generic CEC framework interface. - CEC bus is present in the HDMI connector and enables communication - between compatible devices. + This is a driver for Samsung S5P HDMI CEC interface. It uses the + generic CEC framework interface. + CEC bus is present in the HDMI connector and enables communication + between compatible devices. config VIDEO_STI_HDMI_CEC tristate "STMicroelectronics STiH4xx HDMI CEC driver" @@ -597,10 +597,10 @@ config VIDEO_STI_HDMI_CEC select CEC_CORE select CEC_NOTIFIER ---help--- - This is a driver for STIH4xx HDMI CEC interface. It uses the - generic CEC framework interface. - CEC bus is present in the HDMI connector and enables communication - between compatible devices. + This is a driver for STIH4xx HDMI CEC interface. It uses the + generic CEC framework interface. + CEC bus is present in the HDMI connector and enables communication + between compatible devices. config VIDEO_STM32_HDMI_CEC tristate "STMicroelectronics STM32 HDMI CEC driver" @@ -609,10 +609,10 @@ config VIDEO_STM32_HDMI_CEC select REGMAP_MMIO select CEC_CORE ---help--- - This is a driver for STM32 interface. It uses the - generic CEC framework interface. - CEC bus is present in the HDMI connector and enables communication - between compatible devices. + This is a driver for STM32 interface. It uses the + generic CEC framework interface. + CEC bus is present in the HDMI connector and enables communication + between compatible devices. config VIDEO_TEGRA_HDMI_CEC tristate "Tegra HDMI CEC driver" @@ -620,10 +620,10 @@ config VIDEO_TEGRA_HDMI_CEC select CEC_CORE select CEC_NOTIFIER ---help--- - This is a driver for the Tegra HDMI CEC interface. It uses the - generic CEC framework interface. - The CEC bus is present in the HDMI connector and enables communication - between compatible devices. + This is a driver for the Tegra HDMI CEC interface. It uses the + generic CEC framework interface. + The CEC bus is present in the HDMI connector and enables communication + between compatible devices. endif #CEC_PLATFORM_DRIVERS diff --git a/drivers/media/platform/arv.c b/drivers/media/platform/arv.c index 8fe59bf..1351374 100644 --- a/drivers/media/platform/arv.c +++ b/drivers/media/platform/arv.c @@ -66,7 +66,7 @@ extern struct cpuinfo_m32r boot_cpu_data; * Note that M32700UT does not support CIF mode, but QVGA is * supported by M32700UT hardware using VGA mode of AR LSI. * - * Supported: VGA (Normal mode, Interlace mode) + * Supported: VGA (Normal mode, Interlace mode) * QVGA (Always Interlace mode of VGA) * */ @@ -590,7 +590,7 @@ static void ar_interrupt(int irq, void *dev) /* * ar_initialize() - * ar_initialize() is called by video_register_device() and + * ar_initialize() is called by video_register_device() and * initializes AR LSI and peripherals. * * -1 is returned in all failures. diff --git a/drivers/media/platform/blackfin/ppi.c b/drivers/media/platform/blackfin/ppi.c index 478eb2f..d3dc765 100644 --- a/drivers/media/platform/blackfin/ppi.c +++ b/drivers/media/platform/blackfin/ppi.c @@ -52,7 +52,7 @@ static irqreturn_t ppi_irq_err(int irq, void *dev_id) struct bfin_ppi_regs *reg = info->base; unsigned short status; - /* register on bf561 is cleared when read + /* register on bf561 is cleared when read * others are W1C */ status = bfin_read16(®->status); diff --git a/drivers/media/platform/davinci/dm355_ccdc.c b/drivers/media/platform/davinci/dm355_ccdc.c index 89cb309..238d01b 100644 --- a/drivers/media/platform/davinci/dm355_ccdc.c +++ b/drivers/media/platform/davinci/dm355_ccdc.c @@ -20,10 +20,10 @@ * pre-process the Bayer RGB data, before writing it to SDRAM. * * TODO: 1) Raw bayer parameter settings and bayer capture - * 2) Split module parameter structure to module specific ioctl structs + * 2) Split module parameter structure to module specific ioctl structs * 3) add support for lense shading correction * 4) investigate if enum used for user space type definition - * to be replaced by #defines or integer + * to be replaced by #defines or integer */ #include #include diff --git a/drivers/media/platform/davinci/dm644x_ccdc.c b/drivers/media/platform/davinci/dm644x_ccdc.c index 5fa0a1f..592d3fc 100644 --- a/drivers/media/platform/davinci/dm644x_ccdc.c +++ b/drivers/media/platform/davinci/dm644x_ccdc.c @@ -22,9 +22,9 @@ * may be supported using the same module. * * TODO: Test Raw bayer parameter settings and bayer capture - * Split module parameter structure to module specific ioctl structs - * investigate if enum used for user space type definition - * to be replaced by #defines or integer + * Split module parameter structure to module specific ioctl structs + * investigate if enum used for user space type definition + * to be replaced by #defines or integer */ #include #include diff --git a/drivers/media/platform/davinci/vpfe_capture.c b/drivers/media/platform/davinci/vpfe_capture.c index 7b3f6f8..498f69b 100644 --- a/drivers/media/platform/davinci/vpfe_capture.c +++ b/drivers/media/platform/davinci/vpfe_capture.c @@ -26,8 +26,8 @@ * * * decoder(TVP5146/ YUV/ - * MT9T001) --> Raw Bayer RGB ---> MUX -> VPFE (CCDC/ISIF) - * data input | | + * MT9T001) --> Raw Bayer RGB ---> MUX -> VPFE (CCDC/ISIF) + * data input | | * V | * SDRAM | * V @@ -47,7 +47,7 @@ * block such as IPIPE (on DM355 only). * * Features supported - * - MMAP IO + * - MMAP IO * - Capture using TVP5146 over BT.656 * - support for interfacing decoders using sub device model * - Work with DM355 or DM6446 CCDC to do Raw Bayer RGB/YUV diff --git a/drivers/media/platform/exynos4-is/fimc-core.h b/drivers/media/platform/exynos4-is/fimc-core.h index c0373ae..82d514d 100644 --- a/drivers/media/platform/exynos4-is/fimc-core.h +++ b/drivers/media/platform/exynos4-is/fimc-core.h @@ -303,7 +303,7 @@ struct fimc_m2m_device { * @input: capture input type, grp_id of the attached subdev * @user_subdev_api: true if subdevs are not configured by the host driver * @inh_sensor_ctrls: a flag indicating v4l2 controls are inherited from - * an image sensor subdev + * an image sensor subdev */ struct fimc_vid_cap { struct fimc_ctx *ctx; diff --git a/drivers/media/platform/exynos4-is/fimc-lite.h b/drivers/media/platform/exynos4-is/fimc-lite.h index 9ae1e96..3e238b8 100644 --- a/drivers/media/platform/exynos4-is/fimc-lite.h +++ b/drivers/media/platform/exynos4-is/fimc-lite.h @@ -56,9 +56,9 @@ enum { * @max_height: maximum camera interface input height in pixels * @out_width_align: minimum output width alignment in pixels * @win_hor_offs_align: minimum camera interface crop window horizontal - * offset alignment in pixels + * offset alignment in pixels * @out_hor_offs_align: minimum output DMA compose rectangle horizontal - * offset alignment in pixels + * offset alignment in pixels * @max_dma_bufs: number of output DMA buffer start address registers * @num_instances: total number of FIMC-LITE IP instances available */ diff --git a/drivers/media/platform/mtk-vcodec/vdec_vpu_if.h b/drivers/media/platform/mtk-vcodec/vdec_vpu_if.h index 0dc9ed0..cd37bb2 100644 --- a/drivers/media/platform/mtk-vcodec/vdec_vpu_if.h +++ b/drivers/media/platform/mtk-vcodec/vdec_vpu_if.h @@ -26,7 +26,7 @@ * @inst_addr : VPU decoder instance address * @signaled : 1 - Host has received ack message from VPU, 0 - not received * @ctx : context for v4l2 layer integration - * @dev : platform device of VPU + * @dev : platform device of VPU * @wq : wait queue to wait VPU message ack * @handler : ipi handler for each decoder */ diff --git a/drivers/media/platform/omap3isp/isp.c b/drivers/media/platform/omap3isp/isp.c index b7ff384..8eb000e 100644 --- a/drivers/media/platform/omap3isp/isp.c +++ b/drivers/media/platform/omap3isp/isp.c @@ -920,7 +920,7 @@ static void isp_pipeline_suspend(struct isp_pipeline *pipe) /* * isp_pipeline_is_last - Verify if entity has an enabled link to the output - * video node + * video node * @me: ISP module's media entity * * Returns 1 if the entity has an enabled link to the output video node or 0 diff --git a/drivers/media/platform/sti/hva/hva.h b/drivers/media/platform/sti/hva/hva.h index 8882d90..1226d60 100644 --- a/drivers/media/platform/sti/hva/hva.h +++ b/drivers/media/platform/sti/hva/hva.h @@ -245,7 +245,7 @@ struct hva_enc; * @dbg: context debug info */ struct hva_ctx { - struct hva_dev *hva_dev; + struct hva_dev *hva_dev; struct v4l2_fh fh; struct v4l2_ctrl_handler ctrl_handler; struct hva_controls ctrls; diff --git a/drivers/media/platform/via-camera.h b/drivers/media/platform/via-camera.h index 2d67f8c..54f1631 100644 --- a/drivers/media/platform/via-camera.h +++ b/drivers/media/platform/via-camera.h @@ -29,7 +29,7 @@ #define VCR_CI_BSS 0x00000002 /* WTF "bit stream selection" */ #define VCR_CI_3BUFS 0x00000004 /* 1 = 3 buffers, 0 = 2 buffers */ #define VCR_CI_VIPEN 0x00000008 /* VIP enable */ -#define VCR_CI_CCIR601_8 0 /* CCIR601 input stream, 8 bit */ +#define VCR_CI_CCIR601_8 0 /* CCIR601 input stream, 8 bit */ #define VCR_CI_CCIR656_8 0x00000010 /* ... CCIR656, 8 bit */ #define VCR_CI_CCIR601_16 0x00000020 /* ... CCIR601, 16 bit */ #define VCR_CI_CCIR656_16 0x00000030 /* ... CCIR656, 16 bit */ diff --git a/drivers/media/radio/radio-maxiradio.c b/drivers/media/radio/radio-maxiradio.c index 3aa5ad3..95f06f3 100644 --- a/drivers/media/radio/radio-maxiradio.c +++ b/drivers/media/radio/radio-maxiradio.c @@ -13,7 +13,7 @@ * anybody does please mail me. * * For the pdf file see: - * http://www.nxp.com/acrobat_download2/expired_datasheets/TEA5757_5759_3.pdf + * http://www.nxp.com/acrobat_download2/expired_datasheets/TEA5757_5759_3.pdf * * * CHANGES: diff --git a/drivers/media/radio/radio-mr800.c b/drivers/media/radio/radio-mr800.c index c9f5912..dc6c4f9 100644 --- a/drivers/media/radio/radio-mr800.c +++ b/drivers/media/radio/radio-mr800.c @@ -31,22 +31,22 @@ * http://www.spinics.net/lists/linux-usb-devel/msg10109.html * * Version 0.01: First working version. - * It's required to blacklist AverMedia USB Radio - * in usbhid/hid-quirks.c + * It's required to blacklist AverMedia USB Radio + * in usbhid/hid-quirks.c * Version 0.10: A lot of cleanups and fixes: unpluging the device, - * few mutex locks were added, codinstyle issues, etc. - * Added stereo support. Thanks to - * Douglas Schilling Landgraf and - * David Ellingsworth - * for discussion, help and support. + * few mutex locks were added, codinstyle issues, etc. + * Added stereo support. Thanks to + * Douglas Schilling Landgraf and + * David Ellingsworth + * for discussion, help and support. * Version 0.11: Converted to v4l2_device. * * Many things to do: - * - Correct power management of device (suspend & resume) - * - Add code for scanning and smooth tuning - * - Add code for sensitivity value - * - Correct mistakes - * - In Japan another FREQ_MIN and FREQ_MAX + * - Correct power management of device (suspend & resume) + * - Add code for scanning and smooth tuning + * - Add code for sensitivity value + * - Correct mistakes + * - In Japan another FREQ_MIN and FREQ_MAX */ /* kernel includes */ diff --git a/drivers/media/radio/si470x/radio-si470x-common.c b/drivers/media/radio/si470x/radio-si470x-common.c index c89a7d5..6386938 100644 --- a/drivers/media/radio/si470x/radio-si470x-common.c +++ b/drivers/media/radio/si470x/radio-si470x-common.c @@ -33,18 +33,18 @@ * - switched from bit structs to bit masks * - header file cleaned and integrated * 2008-01-14 Tobias Lorenz - * Version 1.0.2 - * - hex values are now lower case - * - commented USB ID for ADS/Tech moved on todo list - * - blacklisted si470x in hid-quirks.c - * - rds buffer handling functions integrated into *_work, *_read - * - rds_command in si470x_poll exchanged against simple retval - * - check for firmware version 15 - * - code order and prototypes still remain the same - * - spacing and bottom of band codes remain the same + * Version 1.0.2 + * - hex values are now lower case + * - commented USB ID for ADS/Tech moved on todo list + * - blacklisted si470x in hid-quirks.c + * - rds buffer handling functions integrated into *_work, *_read + * - rds_command in si470x_poll exchanged against simple retval + * - check for firmware version 15 + * - code order and prototypes still remain the same + * - spacing and bottom of band codes remain the same * 2008-01-16 Tobias Lorenz * Version 1.0.3 - * - code reordered to avoid function prototypes + * - code reordered to avoid function prototypes * - switch/case defaults are now more user-friendly * - unified comment style * - applied all checkpatch.pl v1.12 suggestions @@ -88,8 +88,8 @@ * - more safety checks, let si470x_get_freq return errno * - vidioc behavior corrected according to v4l2 spec * 2008-10-20 Alexey Klimov - * - add support for KWorld USB FM Radio FM700 - * - blacklisted KWorld radio in hid-core.c and hid-ids.h + * - add support for KWorld USB FM Radio FM700 + * - blacklisted KWorld radio in hid-core.c and hid-ids.h * 2008-12-03 Mark Lord * - add support for DealExtreme USB Radio * 2009-01-31 Bob Ross diff --git a/drivers/media/radio/wl128x/fmdrv_common.h b/drivers/media/radio/wl128x/fmdrv_common.h index 7f1514eb..552e22e 100644 --- a/drivers/media/radio/wl128x/fmdrv_common.h +++ b/drivers/media/radio/wl128x/fmdrv_common.h @@ -311,11 +311,11 @@ struct fm_event_msg_hdr { #define FM_RDS_GROUP_TYPE_MASK_15B ((unsigned long)1<<31) /* RX Alternate Frequency info */ -#define FM_RDS_MIN_AF 1 -#define FM_RDS_MAX_AF 204 -#define FM_RDS_MAX_AF_JAPAN 140 -#define FM_RDS_1_AF_FOLLOWS 225 -#define FM_RDS_25_AF_FOLLOWS 249 +#define FM_RDS_MIN_AF 1 +#define FM_RDS_MAX_AF 204 +#define FM_RDS_MAX_AF_JAPAN 140 +#define FM_RDS_1_AF_FOLLOWS 225 +#define FM_RDS_25_AF_FOLLOWS 249 /* RDS system type (RDS/RBDS) */ #define FM_RDS_SYSTEM_RDS 0 diff --git a/drivers/media/rc/Kconfig b/drivers/media/rc/Kconfig index 0f86382..f14ead5 100644 --- a/drivers/media/rc/Kconfig +++ b/drivers/media/rc/Kconfig @@ -26,7 +26,7 @@ config LIRC IR transmitting (aka "blasting") and for the lirc daemon. menuconfig RC_DECODERS - bool "Remote controller decoders" + bool "Remote controller decoders" depends on RC_CORE default y @@ -452,9 +452,9 @@ config IR_SERIAL_TRANSMITTER Serial Port Transmitter support config IR_SIR - tristate "Built-in SIR IrDA port" - depends on RC_CORE - ---help--- + tristate "Built-in SIR IrDA port" + depends on RC_CORE + ---help--- Say Y if you want to use a IrDA SIR port Transceivers. To compile this driver as a module, choose M here: the module will diff --git a/drivers/media/tuners/mt2063.c b/drivers/media/tuners/mt2063.c index 5c87c5c..80dc3e2 100644 --- a/drivers/media/tuners/mt2063.c +++ b/drivers/media/tuners/mt2063.c @@ -1168,7 +1168,7 @@ static u32 mt2063_set_dnc_output_enable(struct mt2063_state *state, /* * MT2063_SetReceiverMode() - Set the MT2063 receiver mode, according with - * the selected enum mt2063_delivery_sys type. + * the selected enum mt2063_delivery_sys type. * * (DNC1GC & DNC2GC are the values, which are used, when the specific * DNC Output is selected, the other is always off) @@ -1544,7 +1544,7 @@ static u32 MT2063_Tune(struct mt2063_state *state, u32 f_in) * Save original LO1 and LO2 register values */ ofLO1 = state->AS_Data.f_LO1; - ofLO2 = state->AS_Data.f_LO2; + ofLO2 = state->AS_Data.f_LO2; /* * Find and set RF Band setting diff --git a/drivers/media/tuners/si2157.c b/drivers/media/tuners/si2157.c index e35b1fa..9e34d31 100644 --- a/drivers/media/tuners/si2157.c +++ b/drivers/media/tuners/si2157.c @@ -532,7 +532,7 @@ MODULE_DEVICE_TABLE(i2c, si2157_id_table); static struct i2c_driver si2157_driver = { .driver = { - .name = "si2157", + .name = "si2157", .suppress_bind_attrs = true, }, .probe = si2157_probe, diff --git a/drivers/media/tuners/tuner-i2c.h b/drivers/media/tuners/tuner-i2c.h index bda67a5..56dc233 100644 --- a/drivers/media/tuners/tuner-i2c.h +++ b/drivers/media/tuners/tuner-i2c.h @@ -75,7 +75,7 @@ static inline int tuner_i2c_xfer_send_recv(struct tuner_i2c_props *props, * * state structure must contain the following: * - * struct list_head hybrid_tuner_instance_list; + * struct list_head hybrid_tuner_instance_list; * struct tuner_i2c_props i2c_props; * * hybrid_tuner_instance_list (both within state structure and globally) diff --git a/drivers/media/usb/as102/as10x_cmd_cfg.c b/drivers/media/usb/as102/as10x_cmd_cfg.c index c87f2ca..fabbfea 100644 --- a/drivers/media/usb/as102/as10x_cmd_cfg.c +++ b/drivers/media/usb/as102/as10x_cmd_cfg.c @@ -133,9 +133,9 @@ out: * as10x_cmd_eLNA_change_mode - send eLNA change mode command to AS10x * @adap: pointer to AS10x bus adapter * @mode: mode selected: - * - ON : 0x0 => eLNA always ON - * - OFF : 0x1 => eLNA always OFF - * - AUTO : 0x2 => eLNA follow hysteresis parameters + * - ON : 0x0 => eLNA always ON + * - OFF : 0x1 => eLNA always OFF + * - AUTO : 0x2 => eLNA follow hysteresis parameters * to be ON or OFF * * Return 0 on success or negative value in case of error. diff --git a/drivers/media/usb/cx231xx/cx231xx-avcore.c b/drivers/media/usb/cx231xx/cx231xx-avcore.c index 2f52d66..0df62d3 100644 --- a/drivers/media/usb/cx231xx/cx231xx-avcore.c +++ b/drivers/media/usb/cx231xx/cx231xx-avcore.c @@ -105,7 +105,7 @@ void uninitGPIO(struct cx231xx *dev) /****************************************************************************** * A F E - B L O C K C O N T R O L functions * - * [ANALOG FRONT END] * + * [ANALOG FRONT END] * ******************************************************************************/ static int afe_write_byte(struct cx231xx *dev, u16 saddr, u8 data) { diff --git a/drivers/media/usb/em28xx/Kconfig b/drivers/media/usb/em28xx/Kconfig index 4cc029f..451e076 100644 --- a/drivers/media/usb/em28xx/Kconfig +++ b/drivers/media/usb/em28xx/Kconfig @@ -71,10 +71,10 @@ config VIDEO_EM28XX_DVB Empiatech em28xx chips. config VIDEO_EM28XX_RC - tristate "EM28XX Remote Controller support" - depends on RC_CORE - depends on VIDEO_EM28XX - depends on !(RC_CORE=m && VIDEO_EM28XX=y) - default VIDEO_EM28XX - ---help--- - Enables Remote Controller support on em28xx driver. + tristate "EM28XX Remote Controller support" + depends on RC_CORE + depends on VIDEO_EM28XX + depends on !(RC_CORE=m && VIDEO_EM28XX=y) + default VIDEO_EM28XX + ---help--- + Enables Remote Controller support on em28xx driver. diff --git a/drivers/media/usb/gspca/autogain_functions.c b/drivers/media/usb/gspca/autogain_functions.c index f721e83..6dfab2b 100644 --- a/drivers/media/usb/gspca/autogain_functions.c +++ b/drivers/media/usb/gspca/autogain_functions.c @@ -32,7 +32,7 @@ int gspca_expo_autogain( int i, steps, retval = 0; if (v4l2_ctrl_g_ctrl(gspca_dev->autogain) == 0) - return 0; + return 0; orig_gain = gain = v4l2_ctrl_g_ctrl(gspca_dev->gain); orig_exposure = exposure = v4l2_ctrl_g_ctrl(gspca_dev->exposure); @@ -75,11 +75,11 @@ int gspca_expo_autogain( } if (gain != orig_gain) { - v4l2_ctrl_s_ctrl(gspca_dev->gain, gain); + v4l2_ctrl_s_ctrl(gspca_dev->gain, gain); retval = 1; } if (exposure != orig_exposure) { - v4l2_ctrl_s_ctrl(gspca_dev->exposure, exposure); + v4l2_ctrl_s_ctrl(gspca_dev->exposure, exposure); retval = 1; } @@ -112,7 +112,7 @@ int gspca_coarse_grained_expo_autogain( int steps, retval = 0; if (v4l2_ctrl_g_ctrl(gspca_dev->autogain) == 0) - return 0; + return 0; orig_gain = gain = v4l2_ctrl_g_ctrl(gspca_dev->gain); orig_exposure = exposure = v4l2_ctrl_g_ctrl(gspca_dev->exposure); @@ -158,11 +158,11 @@ int gspca_coarse_grained_expo_autogain( } if (gain != orig_gain) { - v4l2_ctrl_s_ctrl(gspca_dev->gain, gain); + v4l2_ctrl_s_ctrl(gspca_dev->gain, gain); retval = 1; } if (exposure != orig_exposure) { - v4l2_ctrl_s_ctrl(gspca_dev->exposure, exposure); + v4l2_ctrl_s_ctrl(gspca_dev->exposure, exposure); retval = 1; } diff --git a/drivers/media/usb/gspca/cpia1.c b/drivers/media/usb/gspca/cpia1.c index 8d41cd4..2b09af8 100644 --- a/drivers/media/usb/gspca/cpia1.c +++ b/drivers/media/usb/gspca/cpia1.c @@ -543,7 +543,7 @@ static int do_command(struct gspca_dev *gspca_dev, u16 command, input_report_key(gspca_dev->input_dev, KEY_CAMERA, a); input_sync(gspca_dev->input_dev); #endif - sd->params.qx3.button = a; + sd->params.qx3.button = a; } if (sd->params.qx3.button) { /* button pressed - unlock the latch */ diff --git a/drivers/media/usb/gspca/stv06xx/stv06xx.h b/drivers/media/usb/gspca/stv06xx/stv06xx.h index f9d74e4..4801867 100644 --- a/drivers/media/usb/gspca/stv06xx/stv06xx.h +++ b/drivers/media/usb/gspca/stv06xx/stv06xx.h @@ -59,7 +59,7 @@ /* Refers to the CIF 352x288 and QCIF 176x144 */ /* 1: 288 lines, 2: 144 lines */ -#define STV_Y_CTRL 0x15c3 +#define STV_Y_CTRL 0x15c3 #define STV_RESET 0x1620 diff --git a/drivers/media/usb/pvrusb2/pvrusb2-devattr.c b/drivers/media/usb/pvrusb2/pvrusb2-devattr.c index 51b3312..7153709 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-devattr.c +++ b/drivers/media/usb/pvrusb2/pvrusb2-devattr.c @@ -319,12 +319,12 @@ static struct tda829x_config tda829x_no_probe = { }; static struct tda18271_std_map hauppauge_tda18271_dvbt_std_map = { - .dvbt_6 = { .if_freq = 3300, .agc_mode = 3, .std = 4, - .if_lvl = 1, .rfagc_top = 0x37, }, - .dvbt_7 = { .if_freq = 3800, .agc_mode = 3, .std = 5, - .if_lvl = 1, .rfagc_top = 0x37, }, - .dvbt_8 = { .if_freq = 4300, .agc_mode = 3, .std = 6, - .if_lvl = 1, .rfagc_top = 0x37, }, + .dvbt_6 = { .if_freq = 3300, .agc_mode = 3, .std = 4, + .if_lvl = 1, .rfagc_top = 0x37, }, + .dvbt_7 = { .if_freq = 3800, .agc_mode = 3, .std = 5, + .if_lvl = 1, .rfagc_top = 0x37, }, + .dvbt_8 = { .if_freq = 4300, .agc_mode = 3, .std = 6, + .if_lvl = 1, .rfagc_top = 0x37, }, }; static struct tda18271_config hauppauge_tda18271_dvb_config = { diff --git a/drivers/media/usb/tm6000/tm6000.h b/drivers/media/usb/tm6000/tm6000.h index 23a0ceb..e1e4577 100644 --- a/drivers/media/usb/tm6000/tm6000.h +++ b/drivers/media/usb/tm6000/tm6000.h @@ -177,7 +177,7 @@ struct tm6000_core { struct tm6000_capabilities caps; /* Used to load alsa/dvb */ - struct work_struct request_module_wk; + struct work_struct request_module_wk; /* Tuner configuration */ int tuner_type; /* type of the tuner */ diff --git a/drivers/media/usb/usbtv/Kconfig b/drivers/media/usb/usbtv/Kconfig index b833c5b..14a0941 100644 --- a/drivers/media/usb/usbtv/Kconfig +++ b/drivers/media/usb/usbtv/Kconfig @@ -1,11 +1,11 @@ config VIDEO_USBTV - tristate "USBTV007 video capture support" - depends on VIDEO_V4L2 && SND - select SND_PCM - select VIDEOBUF2_VMALLOC + tristate "USBTV007 video capture support" + depends on VIDEO_V4L2 && SND + select SND_PCM + select VIDEOBUF2_VMALLOC - ---help--- - This is a video4linux2 driver for USBTV007 based video capture devices. + ---help--- + This is a video4linux2 driver for USBTV007 based video capture devices. - To compile this driver as a module, choose M here: the - module will be called usbtv + To compile this driver as a module, choose M here: the + module will be called usbtv diff --git a/drivers/media/v4l2-core/Kconfig b/drivers/media/v4l2-core/Kconfig index fbcb275..bf52fbd 100644 --- a/drivers/media/v4l2-core/Kconfig +++ b/drivers/media/v4l2-core/Kconfig @@ -41,8 +41,8 @@ config VIDEO_TUNER # Used by drivers that need v4l2-mem2mem.ko config V4L2_MEM2MEM_DEV - tristate - depends on VIDEOBUF2_CORE + tristate + depends on VIDEOBUF2_CORE # Used by LED subsystem flash drivers config V4L2_FLASH_LED_CLASS diff --git a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c index 821f2aa..8d79691 100644 --- a/drivers/media/v4l2-core/v4l2-compat-ioctl32.c +++ b/drivers/media/v4l2-core/v4l2-compat-ioctl32.c @@ -38,7 +38,7 @@ struct v4l2_clip32 { struct v4l2_window32 { struct v4l2_rect w; - __u32 field; /* enum v4l2_field */ + __u32 field; /* enum v4l2_field */ __u32 chromakey; compat_caddr_t clips; /* actually struct v4l2_clip32 * */ __u32 clipcount; diff --git a/drivers/media/v4l2-core/v4l2-dv-timings.c b/drivers/media/v4l2-core/v4l2-dv-timings.c index 930f9c5..e2ee5f0 100644 --- a/drivers/media/v4l2-core/v4l2-dv-timings.c +++ b/drivers/media/v4l2-core/v4l2-dv-timings.c @@ -249,7 +249,7 @@ EXPORT_SYMBOL_GPL(v4l2_find_dv_timings_cea861_vic); * @t2: with this struct. * @pclock_delta: the allowed pixelclock deviation. * @match_reduced_fps: if true, then fail if V4L2_DV_FL_REDUCED_FPS does not - * match. + * match. * * Compare t1 with t2 with a given margin of error for the pixelclock. */ -- cgit v1.1