From 488bf314bf219c66922305a1a320950efa86662f Mon Sep 17 00:00:00 2001 From: Grant Likely Date: Mon, 25 Jul 2011 17:49:43 +0200 Subject: i2c: Allow i2c_add_numbered_adapter() to assign a bus id Currently, if an i2c bus driver supports both static and dynamic bus ids, it needs to choose between calling i2c_add_numbered_adapter() and i2c_add_adapter(). This patch makes i2c_add_numbered_adapter() redirect to i2c_add_adapter() if the requested bus id is -1. Signed-off-by: Grant Likely Signed-off-by: Jean Delvare --- drivers/i2c/busses/i2c-cpm.c | 7 ++----- drivers/i2c/busses/i2c-pxa.c | 7 ++----- drivers/i2c/busses/i2c-s6000.c | 5 +---- drivers/i2c/i2c-core.c | 5 +++++ 4 files changed, 10 insertions(+), 14 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c index 3a20961..b1d9cd2 100644 --- a/drivers/i2c/busses/i2c-cpm.c +++ b/drivers/i2c/busses/i2c-cpm.c @@ -662,11 +662,8 @@ static int __devinit cpm_i2c_probe(struct platform_device *ofdev) /* register new adapter to i2c module... */ data = of_get_property(ofdev->dev.of_node, "linux,i2c-index", &len); - if (data && len == 4) { - cpm->adap.nr = *data; - result = i2c_add_numbered_adapter(&cpm->adap); - } else - result = i2c_add_adapter(&cpm->adap); + cpm->adap.nr = (data && len == 4) ? be32_to_cpup(data) : -1; + result = i2c_add_numbered_adapter(&cpm->adap); if (result < 0) { dev_err(&ofdev->dev, "Unable to register with I2C\n"); diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index f59224a..d603646 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -1079,7 +1079,7 @@ static int i2c_pxa_probe(struct platform_device *dev) * The reason to do so is to avoid sysfs names that only make * sense when there are multiple adapters. */ - i2c->adap.nr = dev->id != -1 ? dev->id : 0; + i2c->adap.nr = dev->id; snprintf(i2c->adap.name, sizeof(i2c->adap.name), "pxa_i2c-i2c.%u", i2c->adap.nr); @@ -1142,10 +1142,7 @@ static int i2c_pxa_probe(struct platform_device *dev) i2c->adap.dev.of_node = dev->dev.of_node; #endif - if (i2c_type == REGS_CE4100) - ret = i2c_add_adapter(&i2c->adap); - else - ret = i2c_add_numbered_adapter(&i2c->adap); + ret = i2c_add_numbered_adapter(&i2c->adap); if (ret < 0) { printk(KERN_INFO "I2C: Failed to add bus\n"); goto eadapt; diff --git a/drivers/i2c/busses/i2c-s6000.c b/drivers/i2c/busses/i2c-s6000.c index cb5d01e..c64ba73 100644 --- a/drivers/i2c/busses/i2c-s6000.c +++ b/drivers/i2c/busses/i2c-s6000.c @@ -341,10 +341,7 @@ static int __devinit s6i2c_probe(struct platform_device *dev) i2c_wr16(iface, S6_I2C_TXTL, 0); platform_set_drvdata(dev, iface); - if (bus_num < 0) - rc = i2c_add_adapter(p_adap); - else - rc = i2c_add_numbered_adapter(p_adap); + rc = i2c_add_numbered_adapter(p_adap); if (rc) goto err_irq_free; return 0; diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 9a58994..131079a 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -925,6 +925,9 @@ EXPORT_SYMBOL(i2c_add_adapter); * or otherwise built in to the system's mainboard, and where i2c_board_info * is used to properly configure I2C devices. * + * If the requested bus number is set to -1, then this function will behave + * identically to i2c_add_adapter, and will dynamically assign a bus number. + * * If no devices have pre-been declared for this bus, then be sure to * register the adapter before any dynamically allocated ones. Otherwise * the required bus ID may not be available. @@ -940,6 +943,8 @@ int i2c_add_numbered_adapter(struct i2c_adapter *adap) int id; int status; + if (adap->nr == -1) /* -1 means dynamically assign bus id */ + return i2c_add_adapter(adap); if (adap->nr & ~MAX_ID_MASK) return -EINVAL; -- cgit v1.1