From 28a6b07a14bd5e63af2c0304306f35c5b963910b Mon Sep 17 00:00:00 2001 From: Tomas Winkler Date: Wed, 3 Sep 2008 11:18:47 +0800 Subject: iwlwifi: fix rx_chain computation This patch fixes rx_chain computation. The code that adjusts number of rx chains to number supported by HW was missing. Miss configuration causes firmware error. Note: iwlwifi supports HW with up to 3 RX chains (2x2, 2x3, 1x2, and 3x3 MIMO). This patch also simplifies the whole RX chain computation. Signed-off-by: Tomas Winkler Signed-off-by: Mohamed Abbas Signed-off-by: Zhu Yi Signed-off-by: John W. Linville --- drivers/net/wireless/iwlwifi/iwl-core.c | 77 ++++++++++++++++++++------------- 1 file changed, 46 insertions(+), 31 deletions(-) (limited to 'drivers') diff --git a/drivers/net/wireless/iwlwifi/iwl-core.c b/drivers/net/wireless/iwlwifi/iwl-core.c index c72f725..80f2f84 100644 --- a/drivers/net/wireless/iwlwifi/iwl-core.c +++ b/drivers/net/wireless/iwlwifi/iwl-core.c @@ -592,12 +592,11 @@ static void iwlcore_free_geos(struct iwl_priv *priv) clear_bit(STATUS_GEO_CONFIGURED, &priv->status); } -static u8 is_single_rx_stream(struct iwl_priv *priv) +static bool is_single_rx_stream(struct iwl_priv *priv) { return !priv->current_ht_config.is_ht || ((priv->current_ht_config.supp_mcs_set[1] == 0) && - (priv->current_ht_config.supp_mcs_set[2] == 0)) || - priv->ps_mode == IWL_MIMO_PS_STATIC; + (priv->current_ht_config.supp_mcs_set[2] == 0)); } static u8 iwl_is_channel_extension(struct iwl_priv *priv, @@ -704,33 +703,39 @@ EXPORT_SYMBOL(iwl_set_rxon_ht); * MIMO (dual stream) requires at least 2, but works better with 3. * This does not determine *which* chains to use, just how many. */ -static int iwlcore_get_rx_chain_counter(struct iwl_priv *priv, - u8 *idle_state, u8 *rx_state) +static int iwl_get_active_rx_chain_count(struct iwl_priv *priv) { - u8 is_single = is_single_rx_stream(priv); - u8 is_cam = test_bit(STATUS_POWER_PMI, &priv->status) ? 0 : 1; + bool is_single = is_single_rx_stream(priv); + bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status); /* # of Rx chains to use when expecting MIMO. */ if (is_single || (!is_cam && (priv->ps_mode == IWL_MIMO_PS_STATIC))) - *rx_state = 2; + return 2; else - *rx_state = 3; + return 3; +} +static int iwl_get_idle_rx_chain_count(struct iwl_priv *priv, int active_cnt) +{ + int idle_cnt; + bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status); /* # Rx chains when idling and maybe trying to save power */ switch (priv->ps_mode) { case IWL_MIMO_PS_STATIC: case IWL_MIMO_PS_DYNAMIC: - *idle_state = (is_cam) ? 2 : 1; + idle_cnt = (is_cam) ? 2 : 1; break; case IWL_MIMO_PS_NONE: - *idle_state = (is_cam) ? *rx_state : 1; + idle_cnt = (is_cam) ? active_cnt : 1; break; + case IWL_MIMO_PS_INVALID: default: - *idle_state = 1; + IWL_ERROR("invalide mimo ps mode %d\n", priv->ps_mode); + WARN_ON(1); + idle_cnt = -1; break; } - - return 0; + return idle_cnt; } /** @@ -741,34 +746,44 @@ static int iwlcore_get_rx_chain_counter(struct iwl_priv *priv, */ void iwl_set_rxon_chain(struct iwl_priv *priv) { - u8 is_single = is_single_rx_stream(priv); - u8 idle_state, rx_state; - - priv->staging_rxon.rx_chain = 0; - rx_state = idle_state = 3; + bool is_single = is_single_rx_stream(priv); + bool is_cam = !test_bit(STATUS_POWER_PMI, &priv->status); + u8 idle_rx_cnt, active_rx_cnt; + u16 rx_chain; /* Tell uCode which antennas are actually connected. * Before first association, we assume all antennas are connected. * Just after first association, iwl_chain_noise_calibration() * checks which antennas actually *are* connected. */ - priv->staging_rxon.rx_chain |= - cpu_to_le16(priv->hw_params.valid_rx_ant << - RXON_RX_CHAIN_VALID_POS); + rx_chain = priv->hw_params.valid_rx_ant << RXON_RX_CHAIN_VALID_POS; /* How many receivers should we use? */ - iwlcore_get_rx_chain_counter(priv, &idle_state, &rx_state); - priv->staging_rxon.rx_chain |= - cpu_to_le16(rx_state << RXON_RX_CHAIN_MIMO_CNT_POS); - priv->staging_rxon.rx_chain |= - cpu_to_le16(idle_state << RXON_RX_CHAIN_CNT_POS); - - if (!is_single && (rx_state >= 2) && - !test_bit(STATUS_POWER_PMI, &priv->status)) + active_rx_cnt = iwl_get_active_rx_chain_count(priv); + idle_rx_cnt = iwl_get_idle_rx_chain_count(priv, active_rx_cnt); + + /* correct rx chain count accoridng hw settings */ + if (priv->hw_params.rx_chains_num < active_rx_cnt) + active_rx_cnt = priv->hw_params.rx_chains_num; + + if (priv->hw_params.rx_chains_num < idle_rx_cnt) + idle_rx_cnt = priv->hw_params.rx_chains_num; + + rx_chain |= active_rx_cnt << RXON_RX_CHAIN_MIMO_CNT_POS; + rx_chain |= idle_rx_cnt << RXON_RX_CHAIN_CNT_POS; + + priv->staging_rxon.rx_chain = cpu_to_le16(rx_chain); + + if (!is_single && (active_rx_cnt >= 2) && is_cam) priv->staging_rxon.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK; else priv->staging_rxon.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK; - IWL_DEBUG_ASSOC("rx chain %X\n", priv->staging_rxon.rx_chain); + IWL_DEBUG_ASSOC("rx_chain=0x%Xi active=%d idle=%d\n", + priv->staging_rxon.rx_chain, + active_rx_cnt, idle_rx_cnt); + + WARN_ON(active_rx_cnt == 0 || idle_rx_cnt == 0 || + active_rx_cnt < idle_rx_cnt); } EXPORT_SYMBOL(iwl_set_rxon_chain); -- cgit v1.1