From 20ed7c094dfe33b0e15e8c60f60012b9278631d3 Mon Sep 17 00:00:00 2001 From: Jeff Garzik Date: Wed, 5 Jul 2006 14:28:34 -0400 Subject: [netdrvr] 3c59x: snip changelog from source code Driver source code is not the preferred place to store change history. Acked-by: Andrew Morton Signed-off-by: Jeff Garzik --- drivers/net/3c59x.c | 166 ---------------------------------------------------- 1 file changed, 166 deletions(-) (limited to 'drivers') diff --git a/drivers/net/3c59x.c b/drivers/net/3c59x.c index 2819de7..80e8ca0 100644 --- a/drivers/net/3c59x.c +++ b/drivers/net/3c59x.c @@ -17,172 +17,6 @@ 410 Severn Ave., Suite 210 Annapolis MD 21403 - Linux Kernel Additions: - - 0.99H+lk0.9 - David S. Miller - softnet, PCI DMA updates - 0.99H+lk1.0 - Jeff Garzik - Remove compatibility defines for kernel versions < 2.2.x. - Update for new 2.3.x module interface - LK1.1.2 (March 19, 2000) - * New PCI interface (jgarzik) - - LK1.1.3 25 April 2000, Andrew Morton - - Merged with 3c575_cb.c - - Don't set RxComplete in boomerang interrupt enable reg - - spinlock in vortex_timer to protect mdio functions - - disable local interrupts around call to vortex_interrupt in - vortex_tx_timeout() (So vortex_interrupt can use spin_lock()) - - Select window 3 in vortex_timer()'s write to Wn3_MAC_Ctrl - - In vortex_start_xmit(), move the lock to _after_ we've altered - vp->cur_tx and vp->tx_full. This defeats the race between - vortex_start_xmit() and vortex_interrupt which was identified - by Bogdan Costescu. - - Merged back support for six new cards from various sources - - Set vortex_have_pci if pci_module_init returns zero (fixes cardbus - insertion oops) - - Tell it that 3c905C has NWAY for 100bT autoneg - - Fix handling of SetStatusEnd in 'Too much work..' code, as - per 2.3.99's 3c575_cb (Dave Hinds). - - Split ISR into two for vortex & boomerang - - Fix MOD_INC/DEC races - - Handle resource allocation failures. - - Fix 3CCFE575CT LED polarity - - Make tx_interrupt_mitigation the default - - LK1.1.4 25 April 2000, Andrew Morton - - Add extra TxReset to vortex_up() to fix 575_cb hotplug initialisation probs. - - Put vortex_info_tbl into __devinitdata - - In the vortex_error StatsFull HACK, disable stats in vp->intr_enable as well - as in the hardware. - - Increased the loop counter in issue_and_wait from 2,000 to 4,000. - - LK1.1.5 28 April 2000, andrewm - - Added powerpc defines (John Daniel said these work...) - - Some extra diagnostics - - In vortex_error(), reset the Tx on maxCollisions. Otherwise most - chips usually get a Tx timeout. - - Added extra_reset module parm - - Replaced some inline timer manip with mod_timer - (Franois romieu ) - - In vortex_up(), don't make Wn3_config initialisation dependent upon has_nway - (this came across from 3c575_cb). - - LK1.1.6 06 Jun 2000, andrewm - - Backed out the PPC defines. - - Use del_timer_sync(), mod_timer(). - - Fix wrapped ulong comparison in boomerang_rx() - - Add IS_TORNADO, use it to suppress 3c905C checksum error msg - (Donald Becker, I Lee Hetherington ) - - Replace union wn3_config with BFINS/BFEXT manipulation for - sparc64 (Pete Zaitcev, Peter Jones) - - In vortex_error, do_tx_reset and vortex_tx_timeout(Vortex): - do a netif_wake_queue() to better recover from errors. (Anders Pedersen, - Donald Becker) - - Print a warning on out-of-memory (rate limited to 1 per 10 secs) - - Added two more Cardbus 575 NICs: 5b57 and 6564 (Paul Wagland) - - LK1.1.7 2 Jul 2000 andrewm - - Better handling of shared IRQs - - Reset the transmitter on a Tx reclaim error - - Fixed crash under OOM during vortex_open() (Mark Hemment) - - Fix Rx cessation problem during OOM (help from Mark Hemment) - - The spinlocks around the mdio access were blocking interrupts for 300uS. - Fix all this to use spin_lock_bh() within mdio_read/write - - Only write to TxFreeThreshold if it's a boomerang - other NICs don't - have one. - - Added 802.3x MAC-layer flow control support - - LK1.1.8 13 Aug 2000 andrewm - - Ignore request_region() return value - already reserved if Cardbus. - - Merged some additional Cardbus flags from Don's 0.99Qk - - Some fixes for 3c556 (Fred Maciel) - - Fix for EISA initialisation (Jan Rekorajski) - - Renamed MII_XCVR_PWR and EEPROM_230 to align with 3c575_cb and D. Becker's drivers - - Fixed MII_XCVR_PWR for 3CCFE575CT - - Added INVERT_LED_PWR, used it. - - Backed out the extra_reset stuff - - LK1.1.9 12 Sep 2000 andrewm - - Backed out the tx_reset_resume flags. It was a no-op. - - In vortex_error, don't reset the Tx on txReclaim errors - - In vortex_error, don't reset the Tx on maxCollisions errors. - Hence backed out all the DownListPtr logic here. - - In vortex_error, give Tornado cards a partial TxReset on - maxCollisions (David Hinds). Defined MAX_COLLISION_RESET for this. - - Redid some driver flags and device names based on pcmcia_cs-3.1.20. - - Fixed a bug where, if vp->tx_full is set when the interface - is downed, it remains set when the interface is upped. Bad - things happen. - - LK1.1.10 17 Sep 2000 andrewm - - Added EEPROM_8BIT for 3c555 (Fred Maciel) - - Added experimental support for the 3c556B Laptop Hurricane (Louis Gerbarg) - - Add HAS_NWAY to "3c900 Cyclone 10Mbps TPO" - - LK1.1.11 13 Nov 2000 andrewm - - Dump MOD_INC/DEC_USE_COUNT, use SET_MODULE_OWNER - - LK1.1.12 1 Jan 2001 andrewm (2.4.0-pre1) - - Call pci_enable_device before we request our IRQ (Tobias Ringstrom) - - Add 3c590 PCI latency timer hack to vortex_probe1 (from 0.99Ra) - - Added extended issue_and_wait for the 3c905CX. - - Look for an MII on PHY index 24 first (3c905CX oddity). - - Add HAS_NWAY to 3cSOHO100-TX (Brett Frankenberger) - - Don't free skbs we don't own on oom path in vortex_open(). - - LK1.1.13 27 Jan 2001 - - Added explicit `medialock' flag so we can truly - lock the media type down with `options'. - - "check ioremap return and some tidbits" (Arnaldo Carvalho de Melo ) - - Added and used EEPROM_NORESET for 3c556B PM resumes. - - Fixed leakage of vp->rx_ring. - - Break out separate HAS_HWCKSM device capability flag. - - Kill vp->tx_full (ANK) - - Merge zerocopy fragment handling (ANK?) - - LK1.1.14 15 Feb 2001 - - Enable WOL. Can be turned on with `enable_wol' module option. - - EISA and PCI initialisation fixes (jgarzik, Manfred Spraul) - - If a device's internalconfig register reports it has NWAY, - use it, even if autoselect is enabled. - - LK1.1.15 6 June 2001 akpm - - Prevent double counting of received bytes (Lars Christensen) - - Add ethtool support (jgarzik) - - Add module parm descriptions (Andrzej M. Krzysztofowicz) - - Implemented alloc_etherdev() API - - Special-case the 'Tx error 82' message. - - LK1.1.16 18 July 2001 akpm - - Make NETIF_F_SG dependent upon nr_free_highpages(), not on CONFIG_HIGHMEM - - Lessen verbosity of bootup messages - - Fix WOL - use new PM API functions. - - Use netif_running() instead of vp->open in suspend/resume. - - Don't reset the interface logic on open/close/rmmod. It upsets - autonegotiation, and hence DHCP (from 0.99T). - - Back out EEPROM_NORESET flag because of the above (we do it for all - NICs). - - Correct 3c982 identification string - - Rename wait_for_completion() to issue_and_wait() to avoid completion.h - clash. - - LK1.1.17 18Dec01 akpm - - PCI ID 9805 is a Python-T, not a dual-port Cyclone. Apparently. - And it has NWAY. - - Mask our advertised modes (vp->advertising) with our capabilities - (MII reg5) when deciding which duplex mode to use. - - Add `global_options' as default for options[]. Ditto global_enable_wol, - global_full_duplex. - - LK1.1.18 01Jul02 akpm - - Fix for undocumented transceiver power-up bit on some 3c566B's - (Donald Becker, Rahul Karnik) - - - See http://www.zip.com.au/~akpm/linux/#3c59x-2.3 for more details. - - Also see Documentation/networking/vortex.txt - - LK1.1.19 10Nov02 Marc Zyngier - - EISA sysfs integration. */ /* -- cgit v1.1