From 1c2ece758a36b48133717e4db060fbe8fa52c5cd Mon Sep 17 00:00:00 2001 From: Henrique de Moraes Holschuh Date: Sun, 11 Jan 2009 03:01:08 -0200 Subject: ACPI: thinkpad-acpi: clean-up fan subdriver quirk Better document the Unitialized HFSP quirk, and modularize it a bit. This makes the code flow easier to read and reduces LOC. Apply the Unitialized HFSP closer to the source (i.e. inside the get_fan_status()), this fixes a harmless buglet where at driver init with the quirk active, the user could set the hwmon pwm1 attribute and switch out of pwm1_mode=2 to pwm1_mode=0 without changing pwm1_mode directly. Signed-off-by: Henrique de Moraes Holschuh Cc: Tino Keitel Signed-off-by: Len Brown --- drivers/platform/x86/thinkpad_acpi.c | 109 +++++++++++++++++++---------------- 1 file changed, 58 insertions(+), 51 deletions(-) (limited to 'drivers') diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index d7d41ae..213219d 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -5897,6 +5897,60 @@ TPACPI_HANDLE(sfan, ec, "SFAN", /* 570 */ ); /* all others */ /* + * Unitialized HFSP quirk: ACPI DSDT and EC fail to initialize the + * HFSP register at boot, so it contains 0x07 but the Thinkpad could + * be in auto mode (0x80). + * + * This is corrected by any write to HFSP either by the driver, or + * by the firmware. + * + * We assume 0x07 really means auto mode while this quirk is active, + * as this is far more likely than the ThinkPad being in level 7, + * which is only used by the firmware during thermal emergencies. + */ + +static void fan_quirk1_detect(void) +{ + /* In some ThinkPads, neither the EC nor the ACPI + * DSDT initialize the HFSP register, and it ends up + * being initially set to 0x07 when it *could* be + * either 0x07 or 0x80. + * + * Enable for TP-1Y (T43), TP-78 (R51e), + * TP-76 (R52), TP-70 (T43, R52), which are known + * to be buggy. */ + if (fan_control_initial_status == 0x07) { + switch (thinkpad_id.ec_model) { + case 0x5931: /* TP-1Y */ + case 0x3837: /* TP-78 */ + case 0x3637: /* TP-76 */ + case 0x3037: /* TP-70 */ + printk(TPACPI_NOTICE + "fan_init: initial fan status is unknown, " + "assuming it is in auto mode\n"); + tp_features.fan_ctrl_status_undef = 1; + ;; + } + } +} + +static void fan_quirk1_handle(u8 *fan_status) +{ + if (unlikely(tp_features.fan_ctrl_status_undef)) { + if (*fan_status != fan_control_initial_status) { + /* something changed the HFSP regisnter since + * driver init time, so it is not undefined + * anymore */ + tp_features.fan_ctrl_status_undef = 0; + } else { + /* Return most likely status. In fact, it + * might be the only possible status */ + *fan_status = TP_EC_FAN_AUTO; + } + } +} + +/* * Call with fan_mutex held */ static void fan_update_desired_level(u8 status) @@ -5934,8 +5988,10 @@ static int fan_get_status(u8 *status) if (unlikely(!acpi_ec_read(fan_status_offset, &s))) return -EIO; - if (likely(status)) + if (likely(status)) { *status = s; + fan_quirk1_handle(status); + } break; @@ -6245,16 +6301,6 @@ static ssize_t fan_pwm1_enable_show(struct device *dev, if (res) return res; - if (unlikely(tp_features.fan_ctrl_status_undef)) { - if (status != fan_control_initial_status) { - tp_features.fan_ctrl_status_undef = 0; - } else { - /* Return most likely status. In fact, it - * might be the only possible status */ - status = TP_EC_FAN_AUTO; - } - } - if (status & TP_EC_FAN_FULLSPEED) { mode = 0; } else if (status & TP_EC_FAN_AUTO) { @@ -6319,14 +6365,6 @@ static ssize_t fan_pwm1_show(struct device *dev, if (res) return res; - if (unlikely(tp_features.fan_ctrl_status_undef)) { - if (status != fan_control_initial_status) { - tp_features.fan_ctrl_status_undef = 0; - } else { - status = TP_EC_FAN_AUTO; - } - } - if ((status & (TP_EC_FAN_AUTO | TP_EC_FAN_FULLSPEED)) != 0) status = fan_control_desired_level; @@ -6458,29 +6496,7 @@ static int __init fan_init(struct ibm_init_struct *iibm) if (likely(acpi_ec_read(fan_status_offset, &fan_control_initial_status))) { fan_status_access_mode = TPACPI_FAN_RD_TPEC; - - /* In some ThinkPads, neither the EC nor the ACPI - * DSDT initialize the fan status, and it ends up - * being set to 0x07 when it *could* be either - * 0x07 or 0x80. - * - * Enable for TP-1Y (T43), TP-78 (R51e), - * TP-76 (R52), TP-70 (T43, R52), which are known - * to be buggy. */ - if (fan_control_initial_status == 0x07) { - switch (thinkpad_id.ec_model) { - case 0x5931: /* TP-1Y */ - case 0x3837: /* TP-78 */ - case 0x3637: /* TP-76 */ - case 0x3037: /* TP-70 */ - printk(TPACPI_NOTICE - "fan_init: initial fan status " - "is unknown, assuming it is " - "in auto mode\n"); - tp_features.fan_ctrl_status_undef = 1; - ;; - } - } + fan_quirk1_detect(); } else { printk(TPACPI_ERR "ThinkPad ACPI EC access misbehaving, " @@ -6669,15 +6685,6 @@ static int fan_read(char *p) if (rc < 0) return rc; - if (unlikely(tp_features.fan_ctrl_status_undef)) { - if (status != fan_control_initial_status) - tp_features.fan_ctrl_status_undef = 0; - else - /* Return most likely status. In fact, it - * might be the only possible status */ - status = TP_EC_FAN_AUTO; - } - len += sprintf(p + len, "status:\t\t%s\n", (status != 0) ? "enabled" : "disabled"); -- cgit v1.1