From 0ce4bc1dbdd911ae1763e2d4ff36bd1b214a59f7 Mon Sep 17 00:00:00 2001 From: Chen-Yu Tsai Date: Mon, 1 Sep 2014 22:28:13 +0800 Subject: i2c: mv64xxx: continue probe when clock-frequency is missing The "clock-frequency" DT property is listed as optional, However, the current code stores the return value of of_property_read_u32 in the return code of mv64xxx_of_config, but then forgets to clear it after setting the default value of "clock-frequency". It is then passed out to the main probe function, resulting in a probe failure when "clock-frequency" is missing. This patch checks and then throws away the return value of of_property_read_u32, instead of storing it and having to clear it afterwards. This issue was discovered after the property was removed from all sunxi DTs. Fixes: 4c730a06c19bb ("i2c: mv64xxx: Set bus frequency to 100kHz if clock-frequency is not provided") Signed-off-by: Chen-Yu Tsai Cc: stable@vger.kernel.org Acked-by: Andrew Lunn Acked-by: Maxime Ripard Signed-off-by: Wolfram Sang --- drivers/i2c/busses/i2c-mv64xxx.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c index 6dc5ded..2f64273 100644 --- a/drivers/i2c/busses/i2c-mv64xxx.c +++ b/drivers/i2c/busses/i2c-mv64xxx.c @@ -746,8 +746,7 @@ mv64xxx_of_config(struct mv64xxx_i2c_data *drv_data, } tclk = clk_get_rate(drv_data->clk); - rc = of_property_read_u32(np, "clock-frequency", &bus_freq); - if (rc) + if (of_property_read_u32(np, "clock-frequency", &bus_freq)) bus_freq = 100000; /* 100kHz by default */ if (!mv64xxx_find_baud_factors(bus_freq, tclk, -- cgit v1.1