From a907905219dc83f501274d5d8c6d2aa2161ff8c3 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Tue, 23 Jun 2009 04:12:24 -0700 Subject: IDE: Save a call to PageHighMem() PageHighMem() isn't cheap so avoid calling it twice on the same page. Signed-off-by: Jean Delvare Acked-by: Bartlomiej Zolnierkiewicz Signed-off-by: David S. Miller --- drivers/ide/ide-taskfile.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index 75b85a8..90e5c0d 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -236,6 +236,7 @@ void ide_pio_bytes(ide_drive_t *drive, struct ide_cmd *cmd, while (len) { unsigned nr_bytes = min(len, cursg->length - cmd->cursg_ofs); + int page_is_high; if (nr_bytes > PAGE_SIZE) nr_bytes = PAGE_SIZE; @@ -247,7 +248,8 @@ void ide_pio_bytes(ide_drive_t *drive, struct ide_cmd *cmd, page = nth_page(page, (offset >> PAGE_SHIFT)); offset %= PAGE_SIZE; - if (PageHighMem(page)) + page_is_high = PageHighMem(page); + if (page_is_high) local_irq_save(flags); buf = kmap_atomic(page, KM_BIO_SRC_IRQ) + offset; @@ -268,7 +270,7 @@ void ide_pio_bytes(ide_drive_t *drive, struct ide_cmd *cmd, kunmap_atomic(buf, KM_BIO_SRC_IRQ); - if (PageHighMem(page)) + if (page_is_high) local_irq_restore(flags); len -= nr_bytes; -- cgit v1.1 From 7fa350b4754cd69c8352ef3f5d23082fbdcab0bd Mon Sep 17 00:00:00 2001 From: "David S. Miller" Date: Tue, 23 Jun 2009 04:16:04 -0700 Subject: ide: Fix annoying warning in ide_pio_bytes(). GCC can't see that flags is only set and used when PageHighmem() is true. Inspired by a patch from Jean Delvare. Signed-off-by: David S. Miller --- drivers/ide/ide-taskfile.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index 90e5c0d..3a5224c 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -225,8 +225,8 @@ void ide_pio_bytes(ide_drive_t *drive, struct ide_cmd *cmd, ide_hwif_t *hwif = drive->hwif; struct scatterlist *sg = hwif->sg_table; struct scatterlist *cursg = cmd->cursg; + unsigned long uninitialized_var(flags); struct page *page; - unsigned long flags; unsigned int offset; u8 *buf; -- cgit v1.1 From 37bbe084d1152cb580d2cc88b4eda2004506a141 Mon Sep 17 00:00:00 2001 From: Mark de Wever Date: Fri, 17 Jul 2009 23:55:15 +0000 Subject: ide-tape: fix debug call This error only occurs when IDETAPE_DEBUG_LOG is enabled. Signed-off-by: Mark de Wever Signed-off-by: David S. Miller --- drivers/ide/ide-tape.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index bc5fb12..1d74f15 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -583,7 +583,7 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, struct ide_cmd cmd; u8 stat; - debug_log(DBG_SENSE, "sector: %llu, nr_sectors: %u\n" + debug_log(DBG_SENSE, "sector: %llu, nr_sectors: %u\n", (unsigned long long)blk_rq_pos(rq), blk_rq_sectors(rq)); BUG_ON(!(blk_special_request(rq) || blk_sense_request(rq))); -- cgit v1.1 From e972d7027c0fb7055f5f2fe02d662c9528063bef Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Fri, 17 Jul 2009 23:55:16 +0000 Subject: ide-tape: convert to ide_debug_log macro Remove tape->debug_mask and use drive->debug_mask instead. There should be no functional change resulting from this patch. Signed-off-by: Borislav Petkov Signed-off-by: David S. Miller --- drivers/ide/ide-tape.c | 102 ++++++++++++++++++++++++------------------------- 1 file changed, 49 insertions(+), 53 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 1d74f15..3468ece 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -47,28 +47,13 @@ #include #include -enum { - /* output errors only */ - DBG_ERR = (1 << 0), - /* output all sense key/asc */ - DBG_SENSE = (1 << 1), - /* info regarding all chrdev-related procedures */ - DBG_CHRDEV = (1 << 2), - /* all remaining procedures */ - DBG_PROCS = (1 << 3), -}; - /* define to see debug info */ -#define IDETAPE_DEBUG_LOG 0 +#undef IDETAPE_DEBUG_LOG -#if IDETAPE_DEBUG_LOG -#define debug_log(lvl, fmt, args...) \ -{ \ - if (tape->debug_mask & lvl) \ - printk(KERN_INFO "ide-tape: " fmt, ## args); \ -} +#ifdef IDETAPE_DEBUG_LOG +#define ide_debug_log(lvl, fmt, args...) __ide_debug_log(lvl, fmt, ## args) #else -#define debug_log(lvl, fmt, args...) do {} while (0) +#define ide_debug_log(lvl, fmt, args...) do {} while (0) #endif /**************************** Tunable parameters *****************************/ @@ -230,8 +215,6 @@ typedef struct ide_tape_obj { char drv_write_prot; /* the tape is write protected (hardware or opened as read-only) */ char write_prot; - - u32 debug_mask; } idetape_tape_t; static DEFINE_MUTEX(idetape_ref_mutex); @@ -290,8 +273,9 @@ static void idetape_analyze_error(ide_drive_t *drive) tape->asc = sense[12]; tape->ascq = sense[13]; - debug_log(DBG_ERR, "pc = %x, sense key = %x, asc = %x, ascq = %x\n", - pc->c[0], tape->sense_key, tape->asc, tape->ascq); + ide_debug_log(IDE_DBG_FUNC, + "cmd: 0x%x, sense key = %x, asc = %x, ascq = %x", + rq->cmd[0], tape->sense_key, tape->asc, tape->ascq); /* correct remaining bytes to transfer */ if (pc->flags & PC_FLAG_DMA_ERROR) @@ -344,7 +328,8 @@ static int ide_tape_callback(ide_drive_t *drive, int dsc) int uptodate = pc->error ? 0 : 1; int err = uptodate ? 0 : IDE_DRV_ERROR_GENERAL; - debug_log(DBG_PROCS, "Enter %s\n", __func__); + ide_debug_log(IDE_DBG_FUNC, "cmd: 0x%x, dsc: %d, err: %d", rq->cmd[0], + dsc, err); if (dsc) ide_tape_handle_dsc(drive); @@ -390,10 +375,12 @@ static int ide_tape_callback(ide_drive_t *drive, int dsc) static void idetape_postpone_request(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; + struct request *rq = drive->hwif->rq; - debug_log(DBG_PROCS, "Enter %s\n", __func__); + ide_debug_log(IDE_DBG_FUNC, "cmd: 0x%x, dsc_poll_freq: %lu", + rq->cmd[0], tape->dsc_poll_freq); - tape->postponed_rq = drive->hwif->rq; + tape->postponed_rq = rq; ide_stall_queue(drive, tape->dsc_poll_freq); } @@ -488,7 +475,8 @@ static ide_startstop_t ide_tape_issue_pc(ide_drive_t *drive, ide_complete_rq(drive, -EIO, blk_rq_bytes(rq)); return ide_stopped; } - debug_log(DBG_SENSE, "Retry #%d, cmd = %02X\n", pc->retries, pc->c[0]); + ide_debug_log(IDE_DBG_SENSE, "retry #%d, cmd: 0x%02x", pc->retries, + pc->c[0]); pc->retries++; @@ -583,8 +571,9 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, struct ide_cmd cmd; u8 stat; - debug_log(DBG_SENSE, "sector: %llu, nr_sectors: %u\n", - (unsigned long long)blk_rq_pos(rq), blk_rq_sectors(rq)); + ide_debug_log(IDE_DBG_RQ, "cmd: 0x%x, sector: %llu, nr_sectors: %u", + rq->cmd[0], (unsigned long long)blk_rq_pos(rq), + blk_rq_sectors(rq)); BUG_ON(!(blk_special_request(rq) || blk_sense_request(rq))); @@ -745,7 +734,7 @@ static int ide_tape_read_position(ide_drive_t *drive) struct ide_atapi_pc pc; u8 buf[20]; - debug_log(DBG_PROCS, "Enter %s\n", __func__); + ide_debug_log(IDE_DBG_FUNC, "enter"); /* prep cmd */ ide_init_pc(&pc); @@ -756,9 +745,9 @@ static int ide_tape_read_position(ide_drive_t *drive) return -1; if (!pc.error) { - debug_log(DBG_SENSE, "BOP - %s\n", + ide_debug_log(IDE_DBG_FUNC, "BOP - %s", (buf[0] & 0x80) ? "Yes" : "No"); - debug_log(DBG_SENSE, "EOP - %s\n", + ide_debug_log(IDE_DBG_FUNC, "EOP - %s", (buf[0] & 0x40) ? "Yes" : "No"); if (buf[0] & 0x4) { @@ -768,8 +757,8 @@ static int ide_tape_read_position(ide_drive_t *drive) &drive->atapi_flags); return -1; } else { - debug_log(DBG_SENSE, "Block Location - %u\n", - be32_to_cpup((__be32 *)&buf[4])); + ide_debug_log(IDE_DBG_FUNC, "Block Location: %u", + be32_to_cpup((__be32 *)&buf[4])); tape->partition = buf[1]; tape->first_frame = be32_to_cpup((__be32 *)&buf[4]); @@ -866,7 +855,8 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int size) struct request *rq; int ret; - debug_log(DBG_SENSE, "%s: cmd=%d\n", __func__, cmd); + ide_debug_log(IDE_DBG_FUNC, "cmd: 0x%x, size: %d", cmd, size); + BUG_ON(cmd != REQ_IDETAPE_READ && cmd != REQ_IDETAPE_WRITE); BUG_ON(size < 0 || size % tape->blk_size); @@ -1029,7 +1019,7 @@ static int idetape_rewind_tape(ide_drive_t *drive) struct ide_atapi_pc pc; int ret; - debug_log(DBG_SENSE, "Enter %s\n", __func__); + ide_debug_log(IDE_DBG_FUNC, "enter"); idetape_create_rewind_cmd(drive, &pc); ret = ide_queue_pc_tail(drive, disk, &pc, NULL, 0); @@ -1055,7 +1045,7 @@ static int idetape_blkdev_ioctl(ide_drive_t *drive, unsigned int cmd, int nr_stages; } config; - debug_log(DBG_PROCS, "Enter %s\n", __func__); + ide_debug_log(IDE_DBG_FUNC, "cmd: 0x%04x", cmd); switch (cmd) { case 0x0340: @@ -1085,6 +1075,9 @@ static int idetape_space_over_filemarks(ide_drive_t *drive, short mt_op, int retval, count = 0; int sprev = !!(tape->caps[4] & 0x20); + + ide_debug_log(IDE_DBG_FUNC, "mt_op: %d, mt_count: %d", mt_op, mt_count); + if (mt_count == 0) return 0; if (MTBSF == mt_op || MTBSFM == mt_op) { @@ -1148,7 +1141,7 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf, ssize_t ret = 0; int rc; - debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count); + ide_debug_log(IDE_DBG_FUNC, "count %Zd", count); if (tape->chrdev_dir != IDETAPE_DIR_READ) { if (test_bit(ilog2(IDE_AFLAG_DETECT_BS), &drive->atapi_flags)) @@ -1187,8 +1180,6 @@ static ssize_t idetape_chrdev_read(struct file *file, char __user *buf, } if (!done && test_bit(ilog2(IDE_AFLAG_FILEMARK), &drive->atapi_flags)) { - debug_log(DBG_SENSE, "%s: spacing over filemark\n", tape->name); - idetape_space_over_filemarks(drive, MTFSF, 1); return 0; } @@ -1209,7 +1200,7 @@ static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, if (tape->write_prot) return -EACCES; - debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count); + ide_debug_log(IDE_DBG_FUNC, "count %Zd", count); /* Initialize write operation */ rc = idetape_init_rw(drive, IDETAPE_DIR_WRITE); @@ -1273,8 +1264,8 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count) struct ide_atapi_pc pc; int i, retval; - debug_log(DBG_ERR, "Handling MTIOCTOP ioctl: mt_op=%d, mt_count=%d\n", - mt_op, mt_count); + ide_debug_log(IDE_DBG_FUNC, "MTIOCTOP ioctl: mt_op: %d, mt_count: %d", + mt_op, mt_count); switch (mt_op) { case MTFSF: @@ -1393,7 +1384,7 @@ static int idetape_chrdev_ioctl(struct inode *inode, struct file *file, int block_offset = 0, position = tape->first_frame; void __user *argp = (void __user *)arg; - debug_log(DBG_CHRDEV, "Enter %s, cmd=%u\n", __func__, cmd); + ide_debug_log(IDE_DBG_FUNC, "cmd: 0x%x", cmd); if (tape->chrdev_dir == IDETAPE_DIR_WRITE) { ide_tape_flush_merge_buffer(drive); @@ -1461,6 +1452,9 @@ static void ide_tape_get_bsize_from_bdesc(ide_drive_t *drive) (buf[4 + 6] << 8) + buf[4 + 7]; tape->drv_write_prot = (buf[2] & 0x80) >> 7; + + ide_debug_log(IDE_DBG_FUNC, "blk_size: %d, write_prot: %d", + tape->blk_size, tape->drv_write_prot); } static int idetape_chrdev_open(struct inode *inode, struct file *filp) @@ -1480,7 +1474,10 @@ static int idetape_chrdev_open(struct inode *inode, struct file *filp) return -ENXIO; } - debug_log(DBG_CHRDEV, "Enter %s\n", __func__); + drive = tape->drive; + filp->private_data = tape; + + ide_debug_log(IDE_DBG_FUNC, "enter"); /* * We really want to do nonseekable_open(inode, filp); here, but some @@ -1489,9 +1486,6 @@ static int idetape_chrdev_open(struct inode *inode, struct file *filp) */ filp->f_mode &= ~(FMODE_PREAD | FMODE_PWRITE); - drive = tape->drive; - - filp->private_data = tape; if (test_and_set_bit(ilog2(IDE_AFLAG_BUSY), &drive->atapi_flags)) { retval = -EBUSY; @@ -1570,7 +1564,7 @@ static int idetape_chrdev_release(struct inode *inode, struct file *filp) lock_kernel(); tape = drive->driver_data; - debug_log(DBG_CHRDEV, "Enter %s\n", __func__); + ide_debug_log(IDE_DBG_FUNC, "enter"); if (tape->chrdev_dir == IDETAPE_DIR_WRITE) idetape_write_release(drive, minor); @@ -1707,7 +1701,6 @@ static int divf_buffer_size(ide_drive_t *drive) { return 1024; } ide_devset_rw_flag(dsc_overlap, IDE_DFLAG_DSC_OVERLAP); -ide_tape_devset_rw_field(debug_mask, debug_mask); ide_tape_devset_rw_field(tdsc, best_dsc_rw_freq); ide_tape_devset_r_field(avg_speed, avg_speed); @@ -1719,7 +1712,6 @@ static const struct ide_proc_devset idetape_settings[] = { __IDE_PROC_DEVSET(avg_speed, 0, 0xffff, NULL, NULL), __IDE_PROC_DEVSET(buffer, 0, 0xffff, NULL, divf_buffer), __IDE_PROC_DEVSET(buffer_size, 0, 0xffff, NULL, divf_buffer_size), - __IDE_PROC_DEVSET(debug_mask, 0, 0xffff, NULL, NULL), __IDE_PROC_DEVSET(dsc_overlap, 0, 1, NULL, NULL), __IDE_PROC_DEVSET(speed, 0, 0xffff, NULL, NULL), __IDE_PROC_DEVSET(tdsc, IDETAPE_DSC_RW_MIN, IDETAPE_DSC_RW_MAX, @@ -1746,7 +1738,9 @@ static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor) int buffer_size; u16 *ctl = (u16 *)&tape->caps[12]; - drive->pc_callback = ide_tape_callback; + ide_debug_log(IDE_DBG_FUNC, "minor: %d", minor); + + drive->pc_callback = ide_tape_callback; drive->dev_flags |= IDE_DFLAG_DSC_OVERLAP; @@ -1932,7 +1926,9 @@ static int ide_tape_probe(ide_drive_t *drive) struct gendisk *g; int minor; - if (!strstr("ide-tape", drive->driver_req)) + ide_debug_log(IDE_DBG_FUNC, "enter"); + + if (!strstr(DRV_NAME, drive->driver_req)) goto failed; if (drive->media != ide_tape) -- cgit v1.1 From 6f3848ac2399faac0be3f26648bf1d7a644a8242 Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Tue, 21 Jul 2009 23:08:23 -0700 Subject: ide-tape: fix handling of postponed rqs ide-tape used to hit [ 58.614854] ide-tape: ht0: BUG: Two DSC requests queued! due to the fact that another rq was being issued while the driver was waiting for DSC to get set for the device executing ATAPI commands which set the DSC to 1 to indicate completion. Here's a sample output of that case: issue REZERO_UNIT [ 143.088505] ide-tape: ide_tape_issue_pc: retry #0, cmd: 0x01 [ 143.095122] ide: Enter ide_pc_intr - interrupt handler [ 143.096118] ide: Packet command completed, 0 bytes transferred [ 143.106319] ide-tape: ide_tape_callback: cmd: 0x1, dsc: 1, err: 0 [ 143.112601] ide-tape: idetape_postpone_request: cmd: 0x1, dsc_poll_freq: 2000 we stall the ide-tape queue here waiting for DSC [ 143.119936] ide-tape: ide_tape_read_position: enter [ 145.119019] ide-tape: idetape_do_request: sector: 4294967295, nr_sectors: 0 and issue the new READ_POSITION rq and hit the check. [ 145.126247] ide-tape: ht0: BUG: Two DSC requests queued! [ 145.131748] ide-tape: ide_tape_read_position: BOP - No [ 145.137059] ide-tape: ide_tape_read_position: EOP - No Also, ->postponed_rq used to point to that postponed request. To make things worse, in certain circumstances the rq it was pointing to got replaced unterneath it by swiftly reusing the same rq from the mempool of the block layer practically confusing stuff even more. However, we don't need to keep a pointer to that rq but simply wait for DSC to be set first before issuing the follow-up request in the drive's queue. In order to do that, we make idetape_do_request() first check the DSC and if not set, we stall the drive queue giving the other device on that IDE channel a chance. Signed-off-by: Borislav Petkov Signed-off-by: David S. Miller --- drivers/ide/ide-tape.c | 33 +++++++++++---------------------- 1 file changed, 11 insertions(+), 22 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 3468ece..7b2032b 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -155,7 +155,8 @@ typedef struct ide_tape_obj { * other device. Note that at most we will have only one DSC (usually * data transfer) request in the device request queue. */ - struct request *postponed_rq; + bool postponed_rq; + /* The time in which we started polling for DSC */ unsigned long dsc_polling_start; /* Timer used to poll for dsc */ @@ -372,15 +373,14 @@ static int ide_tape_callback(ide_drive_t *drive, int dsc) * Postpone the current request so that ide.c will be able to service requests * from another device on the same port while we are polling for DSC. */ -static void idetape_postpone_request(ide_drive_t *drive) +static void ide_tape_stall_queue(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; - struct request *rq = drive->hwif->rq; ide_debug_log(IDE_DBG_FUNC, "cmd: 0x%x, dsc_poll_freq: %lu", - rq->cmd[0], tape->dsc_poll_freq); + drive->hwif->rq->cmd[0], tape->dsc_poll_freq); - tape->postponed_rq = rq; + tape->postponed_rq = true; ide_stall_queue(drive, tape->dsc_poll_freq); } @@ -394,7 +394,7 @@ static void ide_tape_handle_dsc(ide_drive_t *drive) tape->dsc_poll_freq = IDETAPE_DSC_MA_FAST; tape->dsc_timeout = jiffies + IDETAPE_DSC_MA_TIMEOUT; /* Allow ide.c to handle other requests */ - idetape_postpone_request(drive); + ide_tape_stall_queue(drive); } /* @@ -567,7 +567,6 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, ide_hwif_t *hwif = drive->hwif; idetape_tape_t *tape = drive->driver_data; struct ide_atapi_pc *pc = NULL; - struct request *postponed_rq = tape->postponed_rq; struct ide_cmd cmd; u8 stat; @@ -583,18 +582,6 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, goto out; } - if (postponed_rq != NULL) - if (rq != postponed_rq) { - printk(KERN_ERR "ide-tape: ide-tape.c bug - " - "Two DSC requests were queued\n"); - drive->failed_pc = NULL; - rq->errors = 0; - ide_complete_rq(drive, 0, blk_rq_bytes(rq)); - return ide_stopped; - } - - tape->postponed_rq = NULL; - /* * If the tape is still busy, postpone our request and service * the other device meanwhile. @@ -612,7 +599,7 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, if (!(drive->atapi_flags & IDE_AFLAG_IGNORE_DSC) && !(stat & ATA_DSC)) { - if (postponed_rq == NULL) { + if (!tape->postponed_rq) { tape->dsc_polling_start = jiffies; tape->dsc_poll_freq = tape->best_dsc_rw_freq; tape->dsc_timeout = jiffies + IDETAPE_DSC_RW_TIMEOUT; @@ -629,10 +616,12 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, tape->dsc_polling_start + IDETAPE_DSC_MA_THRESHOLD)) tape->dsc_poll_freq = IDETAPE_DSC_MA_SLOW; - idetape_postpone_request(drive); + ide_tape_stall_queue(drive); return ide_stopped; - } else + } else { drive->atapi_flags &= ~IDE_AFLAG_IGNORE_DSC; + tape->postponed_rq = false; + } if (rq->cmd[13] & REQ_IDETAPE_READ) { pc = &tape->queued_pc; -- cgit v1.1 From 72db37b2c9c5b71e49068f5fac6433a6c36498a5 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 2 Aug 2009 13:19:05 -0700 Subject: drivers/ide/ide-cd.c: Use DIV_ROUND_CLOSEST The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d but is perhaps more readable. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // @haskernel@ @@ #include @depends on haskernel@ expression x,__divisor; @@ - (((x) + ((__divisor) / 2)) / (__divisor)) + DIV_ROUND_CLOSEST(x,__divisor) // Signed-off-by: Julia Lawall Acked-by: Borislav Petkov Signed-off-by: David S. Miller --- drivers/ide/ide-cd.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index 6a9a769..ad0ab0c 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -1146,8 +1146,8 @@ void ide_cdrom_update_speed(ide_drive_t *drive, u8 *buf) ide_debug_log(IDE_DBG_PROBE, "curspeed: %u, maxspeed: %u", curspeed, maxspeed); - cd->current_speed = (curspeed + (176/2)) / 176; - cd->max_speed = (maxspeed + (176/2)) / 176; + cd->current_speed = DIV_ROUND_CLOSEST(curspeed, 176); + cd->max_speed = DIV_ROUND_CLOSEST(maxspeed, 176); } #define IDE_CD_CAPABILITIES \ -- cgit v1.1 From 2d5abcedeb41f4af9582c60cef70749c3ab90a3b Mon Sep 17 00:00:00 2001 From: Jaswinder Singh Rajput Date: Sun, 2 Aug 2009 20:17:34 -0700 Subject: ide: ide-taskfile.c fix style problems Fix trivial style problems: WARNING: Use #include instead of WARNING: space prohibited between function name and open parenthesis '(' WARNING: EXPORT_SYMBOL(foo); should immediately follow its function/variable ERROR: do not use C99 // comments X 2 ERROR: trailing statements should be on next line ERROR: trailing whitespace ERROR: switch and case should be at the same indent WARNING: line over 80 characters total: 5 errors, 4 warnings Also removed dead code Also used pr_err() to avoid line breaks Signed-off-by: Jaswinder Singh Rajput Acked-by: Bartlomiej Zolnierkiewicz Signed-off-by: David S. Miller --- drivers/ide/ide-taskfile.c | 109 +++++++++++++++++++++------------------------ 1 file changed, 51 insertions(+), 58 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index 3a5224c..50336d5 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -19,8 +19,8 @@ #include #include #include +#include -#include #include void ide_tf_readback(ide_drive_t *drive, struct ide_cmd *cmd) @@ -53,7 +53,7 @@ void ide_tf_dump(const char *s, struct ide_cmd *cmd) #endif } -int taskfile_lib_get_identify (ide_drive_t *drive, u8 *buf) +int taskfile_lib_get_identify(ide_drive_t *drive, u8 *buf) { struct ide_cmd cmd; @@ -86,7 +86,7 @@ ide_startstop_t do_rw_taskfile(ide_drive_t *drive, struct ide_cmd *orig_cmd) if (orig_cmd->protocol == ATA_PROT_PIO && (orig_cmd->tf_flags & IDE_TFLAG_MULTI_PIO) && drive->mult_count == 0) { - printk(KERN_ERR "%s: multimode not set!\n", drive->name); + pr_err("%s: multimode not set!\n", drive->name); return ide_stopped; } @@ -214,7 +214,7 @@ static u8 wait_drive_not_busy(ide_drive_t *drive) } if (stat & ATA_BUSY) - printk(KERN_ERR "%s: drive still BUSY!\n", drive->name); + pr_err("%s: drive still BUSY!\n", drive->name); return stat; } @@ -400,8 +400,7 @@ static ide_startstop_t pre_task_out_intr(ide_drive_t *drive, if (ide_wait_stat(&startstop, drive, ATA_DRQ, drive->bad_wstat, WAIT_DRQ)) { - printk(KERN_ERR "%s: no DRQ after issuing %sWRITE%s\n", - drive->name, + pr_err("%s: no DRQ after issuing %sWRITE%s\n", drive->name, (cmd->tf_flags & IDE_TFLAG_MULTI_PIO) ? "MULT" : "", (drive->dev_flags & IDE_DFLAG_LBA48) ? "_EXT" : ""); return startstop; @@ -451,7 +450,6 @@ put_req: blk_put_request(rq); return error; } - EXPORT_SYMBOL(ide_raw_taskfile); int ide_no_data_taskfile(ide_drive_t *drive, struct ide_cmd *cmd) @@ -477,10 +475,9 @@ int ide_taskfile_ioctl(ide_drive_t *drive, unsigned long arg) u16 nsect = 0; char __user *buf = (char __user *)arg; -// printk("IDE Taskfile ...\n"); - req_task = kzalloc(tasksize, GFP_KERNEL); - if (req_task == NULL) return -ENOMEM; + if (req_task == NULL) + return -ENOMEM; if (copy_from_user(req_task, buf, tasksize)) { kfree(req_task); return -EFAULT; @@ -488,7 +485,7 @@ int ide_taskfile_ioctl(ide_drive_t *drive, unsigned long arg) taskout = req_task->out_size; taskin = req_task->in_size; - + if (taskin > 65536 || taskout > 65536) { err = -EINVAL; goto abort; @@ -578,51 +575,49 @@ int ide_taskfile_ioctl(ide_drive_t *drive, unsigned long arg) cmd.protocol = ATA_PROT_DMA; switch (req_task->data_phase) { - case TASKFILE_MULTI_OUT: - if (!drive->mult_count) { - /* (hs): give up if multcount is not set */ - printk(KERN_ERR "%s: %s Multimode Write " \ - "multcount is not set\n", - drive->name, __func__); - err = -EPERM; - goto abort; - } - cmd.tf_flags |= IDE_TFLAG_MULTI_PIO; - /* fall through */ - case TASKFILE_OUT: - cmd.protocol = ATA_PROT_PIO; - /* fall through */ - case TASKFILE_OUT_DMAQ: - case TASKFILE_OUT_DMA: - cmd.tf_flags |= IDE_TFLAG_WRITE; - nsect = taskout / SECTOR_SIZE; - data_buf = outbuf; - break; - case TASKFILE_MULTI_IN: - if (!drive->mult_count) { - /* (hs): give up if multcount is not set */ - printk(KERN_ERR "%s: %s Multimode Read failure " \ - "multcount is not set\n", - drive->name, __func__); - err = -EPERM; - goto abort; - } - cmd.tf_flags |= IDE_TFLAG_MULTI_PIO; - /* fall through */ - case TASKFILE_IN: - cmd.protocol = ATA_PROT_PIO; - /* fall through */ - case TASKFILE_IN_DMAQ: - case TASKFILE_IN_DMA: - nsect = taskin / SECTOR_SIZE; - data_buf = inbuf; - break; - case TASKFILE_NO_DATA: - cmd.protocol = ATA_PROT_NODATA; - break; - default: - err = -EFAULT; + case TASKFILE_MULTI_OUT: + if (!drive->mult_count) { + /* (hs): give up if multcount is not set */ + pr_err("%s: %s Multimode Write multcount is not set\n", + drive->name, __func__); + err = -EPERM; + goto abort; + } + cmd.tf_flags |= IDE_TFLAG_MULTI_PIO; + /* fall through */ + case TASKFILE_OUT: + cmd.protocol = ATA_PROT_PIO; + /* fall through */ + case TASKFILE_OUT_DMAQ: + case TASKFILE_OUT_DMA: + cmd.tf_flags |= IDE_TFLAG_WRITE; + nsect = taskout / SECTOR_SIZE; + data_buf = outbuf; + break; + case TASKFILE_MULTI_IN: + if (!drive->mult_count) { + /* (hs): give up if multcount is not set */ + pr_err("%s: %s Multimode Read multcount is not set\n", + drive->name, __func__); + err = -EPERM; goto abort; + } + cmd.tf_flags |= IDE_TFLAG_MULTI_PIO; + /* fall through */ + case TASKFILE_IN: + cmd.protocol = ATA_PROT_PIO; + /* fall through */ + case TASKFILE_IN_DMAQ: + case TASKFILE_IN_DMA: + nsect = taskin / SECTOR_SIZE; + data_buf = inbuf; + break; + case TASKFILE_NO_DATA: + cmd.protocol = ATA_PROT_NODATA; + break; + default: + err = -EFAULT; + goto abort; } if (req_task->req_cmd == IDE_DRIVE_TASK_NO_DATA) @@ -631,7 +626,7 @@ int ide_taskfile_ioctl(ide_drive_t *drive, unsigned long arg) nsect = (cmd.hob.nsect << 8) | cmd.tf.nsect; if (!nsect) { - printk(KERN_ERR "%s: in/out command without data\n", + pr_err("%s: in/out command without data\n", drive->name); err = -EFAULT; goto abort; @@ -673,8 +668,6 @@ abort: kfree(outbuf); kfree(inbuf); -// printk("IDE Taskfile ioctl ended. rc = %i\n", err); - return err; } #endif -- cgit v1.1 From fa56d4cb4022c8b313c3b99236e1b87effc3655b Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 23 Jun 2009 11:29:11 +0000 Subject: ide: allow ide_dev_read_id() to be called from the IRQ context * Un-static __ide_wait_stat(). * Allow ide_dev_read_id() helper to be called from the IRQ context by adding irq_ctx flag and using mdelay()/__ide_wait_stat() when needed. * Switch ide_driveid_update() to set irq_ctx flag. This change is needed for the consecutive patch which fixes races in handling of user-space SET XFER commands but for improved bisectability and clarity it is better to do it in a separate patch. Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: David S. Miller --- drivers/ide/ide-iops.c | 6 +++--- drivers/ide/ide-probe.c | 31 +++++++++++++++++++++---------- 2 files changed, 24 insertions(+), 13 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index 2892b24..b998738 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -102,8 +102,8 @@ EXPORT_SYMBOL(ide_fixstring); * setting a timer to wake up at half second intervals thereafter, * until timeout is achieved, before timing out. */ -static int __ide_wait_stat(ide_drive_t *drive, u8 good, u8 bad, - unsigned long timeout, u8 *rstat) +int __ide_wait_stat(ide_drive_t *drive, u8 good, u8 bad, + unsigned long timeout, u8 *rstat) { ide_hwif_t *hwif = drive->hwif; const struct ide_tp_ops *tp_ops = hwif->tp_ops; @@ -316,7 +316,7 @@ int ide_driveid_update(ide_drive_t *drive) return 0; SELECT_MASK(drive, 1); - rc = ide_dev_read_id(drive, ATA_CMD_ID_ATA, id); + rc = ide_dev_read_id(drive, ATA_CMD_ID_ATA, id, 1); SELECT_MASK(drive, 0); if (rc) diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 1bb106f..8de442c 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -238,6 +238,7 @@ static void do_identify(ide_drive_t *drive, u8 cmd, u16 *id) * @drive: drive to identify * @cmd: command to use * @id: buffer for IDENTIFY data + * @irq_ctx: flag set when called from the IRQ context * * Sends an ATA(PI) IDENTIFY request to a drive and waits for a response. * @@ -246,7 +247,7 @@ static void do_identify(ide_drive_t *drive, u8 cmd, u16 *id) * 2 device aborted the command (refused to identify itself) */ -int ide_dev_read_id(ide_drive_t *drive, u8 cmd, u16 *id) +int ide_dev_read_id(ide_drive_t *drive, u8 cmd, u16 *id, int irq_ctx) { ide_hwif_t *hwif = drive->hwif; struct ide_io_ports *io_ports = &hwif->io_ports; @@ -263,7 +264,10 @@ int ide_dev_read_id(ide_drive_t *drive, u8 cmd, u16 *id) tp_ops->write_devctl(hwif, ATA_NIEN | ATA_DEVCTL_OBS); /* take a deep breath */ - msleep(50); + if (irq_ctx) + mdelay(50); + else + msleep(50); if (io_ports->ctl_addr && (hwif->host_flags & IDE_HFLAG_BROKEN_ALTSTATUS) == 0) { @@ -295,12 +299,19 @@ int ide_dev_read_id(ide_drive_t *drive, u8 cmd, u16 *id) timeout = ((cmd == ATA_CMD_ID_ATA) ? WAIT_WORSTCASE : WAIT_PIDENTIFY) / 2; - if (ide_busy_sleep(drive, timeout, use_altstatus)) - return 1; - /* wait for IRQ and ATA_DRQ */ - msleep(50); - s = tp_ops->read_status(hwif); + if (irq_ctx) { + rc = __ide_wait_stat(drive, ATA_DRQ, BAD_R_STAT, timeout, &s); + if (rc) + return 1; + } else { + rc = ide_busy_sleep(drive, timeout, use_altstatus); + if (rc) + return 1; + + msleep(50); + s = tp_ops->read_status(hwif); + } if (OK_STAT(s, ATA_DRQ, BAD_R_STAT)) { /* drive returned ID */ @@ -406,10 +417,10 @@ static int do_probe (ide_drive_t *drive, u8 cmd) if (OK_STAT(stat, ATA_DRDY, ATA_BUSY) || present || cmd == ATA_CMD_ID_ATAPI) { - rc = ide_dev_read_id(drive, cmd, id); + rc = ide_dev_read_id(drive, cmd, id, 0); if (rc) /* failed: try again */ - rc = ide_dev_read_id(drive, cmd, id); + rc = ide_dev_read_id(drive, cmd, id, 0); stat = tp_ops->read_status(hwif); @@ -424,7 +435,7 @@ static int do_probe (ide_drive_t *drive, u8 cmd) msleep(50); tp_ops->exec_command(hwif, ATA_CMD_DEV_RESET); (void)ide_busy_sleep(drive, WAIT_WORSTCASE, 0); - rc = ide_dev_read_id(drive, cmd, id); + rc = ide_dev_read_id(drive, cmd, id, 0); } /* ensure drive IRQ is clear */ -- cgit v1.1 From 665d66e8fad60a5a162c4615f27f916ad1a6d567 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Tue, 23 Jun 2009 11:35:51 +0000 Subject: ide: fix races in handling of user-space SET XFER commands * Make cmd->tf_flags field 'u16' and add IDE_TFLAG_SET_XFER taskfile flag. * Update ide_finish_cmd() to set xfer / re-read id if the new flag is set. * Convert set_xfer_rate() (write handler for /proc/ide/hd?/current_speed) and ide_cmd_ioctl() (HDIO_DRIVE_CMD ioctl handler) to use the new flag. * Remove no longer needed disable_irq_nosync() + enable_irq() from ide_config_drive_speed(). Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: David S. Miller --- drivers/ide/ide-ioctls.c | 8 ++------ drivers/ide/ide-iops.c | 10 ---------- drivers/ide/ide-proc.c | 10 ++-------- drivers/ide/ide-taskfile.c | 9 ++++++++- 4 files changed, 12 insertions(+), 25 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-ioctls.c b/drivers/ide/ide-ioctls.c index e246d3d..d3440b5 100644 --- a/drivers/ide/ide-ioctls.c +++ b/drivers/ide/ide-ioctls.c @@ -167,6 +167,8 @@ static int ide_cmd_ioctl(ide_drive_t *drive, unsigned long arg) err = -EINVAL; goto abort; } + + cmd.tf_flags |= IDE_TFLAG_SET_XFER; } err = ide_raw_taskfile(drive, &cmd, buf, args[3]); @@ -174,12 +176,6 @@ static int ide_cmd_ioctl(ide_drive_t *drive, unsigned long arg) args[0] = tf->status; args[1] = tf->error; args[2] = tf->nsect; - - if (!err && xfer_rate) { - /* active-retuning-calls future */ - ide_set_xfer_rate(drive, xfer_rate); - ide_driveid_update(drive); - } abort: if (copy_to_user((void __user *)arg, &args, 4)) err = -EFAULT; diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index b998738..b14fa9a 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -363,14 +363,6 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed) * this point (lost interrupt). */ - /* - * FIXME: we race against the running IRQ here if - * this is called from non IRQ context. If we use - * disable_irq() we hang on the error path. Work - * is needed. - */ - disable_irq_nosync(hwif->irq); - udelay(1); tp_ops->dev_select(drive); SELECT_MASK(drive, 1); @@ -394,8 +386,6 @@ int ide_config_drive_speed(ide_drive_t *drive, u8 speed) SELECT_MASK(drive, 0); - enable_irq(hwif->irq); - if (error) { (void) ide_dump_status(drive, "set_drive_speed_status", stat); return error; diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c index 3242698..021de41 100644 --- a/drivers/ide/ide-proc.c +++ b/drivers/ide/ide-proc.c @@ -195,7 +195,6 @@ ide_devset_get(xfer_rate, current_speed); static int set_xfer_rate (ide_drive_t *drive, int arg) { struct ide_cmd cmd; - int err; if (arg < XFER_PIO_0 || arg > XFER_UDMA_6) return -EINVAL; @@ -206,14 +205,9 @@ static int set_xfer_rate (ide_drive_t *drive, int arg) cmd.tf.nsect = (u8)arg; cmd.valid.out.tf = IDE_VALID_FEATURE | IDE_VALID_NSECT; cmd.valid.in.tf = IDE_VALID_NSECT; + cmd.tf_flags = IDE_TFLAG_SET_XFER; - err = ide_no_data_taskfile(drive, &cmd); - - if (!err) { - ide_set_xfer_rate(drive, (u8) arg); - ide_driveid_update(drive); - } - return err; + return ide_no_data_taskfile(drive, &cmd); } ide_devset_rw(current_speed, xfer_rate); diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index 50336d5..cc8633c 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -324,10 +324,17 @@ static void ide_error_cmd(ide_drive_t *drive, struct ide_cmd *cmd) void ide_finish_cmd(ide_drive_t *drive, struct ide_cmd *cmd, u8 stat) { struct request *rq = drive->hwif->rq; - u8 err = ide_read_error(drive); + u8 err = ide_read_error(drive), nsect = cmd->tf.nsect; + u8 set_xfer = !!(cmd->tf_flags & IDE_TFLAG_SET_XFER); ide_complete_cmd(drive, cmd, stat, err); rq->errors = err; + + if (err == 0 && set_xfer) { + ide_set_xfer_rate(drive, nsect); + ide_driveid_update(drive); + } + ide_complete_rq(drive, err ? -EIO : 0, blk_rq_bytes(rq)); } -- cgit v1.1 From 468b5ef8a8f67a780dd5f51410f8c92761b36f06 Mon Sep 17 00:00:00 2001 From: Kevin Hilman Date: Mon, 6 Jul 2009 12:26:16 +0000 Subject: IDE: palm_bk3710: convert clock usage after clkdev conversion DaVinci core code has converted to the new clkdev API so clock name strings are not needed. Instead, just the a 'struct device' pointer is needed. Signed-off-by: Kevin Hilman Acked-by: Sergei Shtylyov Signed-off-by: David S. Miller --- drivers/ide/palm_bk3710.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers') diff --git a/drivers/ide/palm_bk3710.c b/drivers/ide/palm_bk3710.c index 3c1dc01..f8eddf0 100644 --- a/drivers/ide/palm_bk3710.c +++ b/drivers/ide/palm_bk3710.c @@ -318,7 +318,7 @@ static int __init palm_bk3710_probe(struct platform_device *pdev) int i, rc; struct ide_hw hw, *hws[] = { &hw }; - clk = clk_get(&pdev->dev, "IDECLK"); + clk = clk_get(&pdev->dev, NULL); if (IS_ERR(clk)) return -ENODEV; -- cgit v1.1 From 76fbebfbb593bd66780db0a808afe1d21c7ff6d6 Mon Sep 17 00:00:00 2001 From: Sergey Matyukevich Date: Sat, 15 Aug 2009 00:02:41 +0000 Subject: at91_ide: remove headers specific for at91sam9263 This driver requires only static memory controller definitions and macroses contained in generic header at91sam9_smc.h. Those extra headers are misleading since this driver also works fine for at91sam9260 SoC: tests were performed on afeb9260 board. Signed-off-by: Sergey Matyukevich Acked-by: Stanislaw Gruszka Signed-off-by: David S. Miller --- drivers/ide/at91_ide.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/at91_ide.c b/drivers/ide/at91_ide.c index dbfeda4..248219a 100644 --- a/drivers/ide/at91_ide.c +++ b/drivers/ide/at91_ide.c @@ -29,9 +29,7 @@ #include #include -#include #include -#include #define DRV_NAME "at91_ide" -- cgit v1.1 From 6d703a81ad5fdd102334751ddacb053ecc6ff046 Mon Sep 17 00:00:00 2001 From: Alexey Dobriyan Date: Tue, 1 Sep 2009 17:52:57 -0700 Subject: ide: convert to ->proc_fops ->read_proc, ->write_proc are going away, ->proc_fops should be used instead. The only tricky place is IDENTIFY handling: if for some reason taskfile_lib_get_identify() fails, buffer _is_ changed and at least first byte is overwritten. Emulate old behaviour with returning that first byte to userspace and reporting length=1 despite overall -E. Signed-off-by: Alexey Dobriyan Signed-off-by: David S. Miller --- drivers/ide/ide-cd.c | 28 +++- drivers/ide/ide-disk_proc.c | 129 +++++++++++------ drivers/ide/ide-floppy_proc.c | 30 ++-- drivers/ide/ide-proc.c | 330 +++++++++++++++++++++++++++--------------- drivers/ide/ide-tape.c | 31 ++-- 5 files changed, 362 insertions(+), 186 deletions(-) (limited to 'drivers') diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index ad0ab0c..b79ca41 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include #include @@ -1389,19 +1390,30 @@ static sector_t ide_cdrom_capacity(ide_drive_t *drive) return capacity * sectors_per_frame; } -static int proc_idecd_read_capacity(char *page, char **start, off_t off, - int count, int *eof, void *data) +static int idecd_capacity_proc_show(struct seq_file *m, void *v) { - ide_drive_t *drive = data; - int len; + ide_drive_t *drive = m->private; - len = sprintf(page, "%llu\n", (long long)ide_cdrom_capacity(drive)); - PROC_IDE_READ_RETURN(page, start, off, count, eof, len); + seq_printf(m, "%llu\n", (long long)ide_cdrom_capacity(drive)); + return 0; +} + +static int idecd_capacity_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, idecd_capacity_proc_show, PDE(inode)->data); } +static const struct file_operations idecd_capacity_proc_fops = { + .owner = THIS_MODULE, + .open = idecd_capacity_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + static ide_proc_entry_t idecd_proc[] = { - { "capacity", S_IFREG|S_IRUGO, proc_idecd_read_capacity, NULL }, - { NULL, 0, NULL, NULL } + { "capacity", S_IFREG|S_IRUGO, &idecd_capacity_proc_fops }, + {} }; static ide_proc_entry_t *ide_cd_proc_entries(ide_drive_t *drive) diff --git a/drivers/ide/ide-disk_proc.c b/drivers/ide/ide-disk_proc.c index 19f263b..60b0590 100644 --- a/drivers/ide/ide-disk_proc.c +++ b/drivers/ide/ide-disk_proc.c @@ -1,5 +1,6 @@ #include #include +#include #include "ide-disk.h" @@ -37,77 +38,117 @@ static int get_smart_data(ide_drive_t *drive, u8 *buf, u8 sub_cmd) return ide_raw_taskfile(drive, &cmd, buf, 1); } -static int proc_idedisk_read_cache - (char *page, char **start, off_t off, int count, int *eof, void *data) +static int idedisk_cache_proc_show(struct seq_file *m, void *v) { - ide_drive_t *drive = (ide_drive_t *) data; - char *out = page; - int len; + ide_drive_t *drive = (ide_drive_t *) m->private; if (drive->dev_flags & IDE_DFLAG_ID_READ) - len = sprintf(out, "%i\n", drive->id[ATA_ID_BUF_SIZE] / 2); + seq_printf(m, "%i\n", drive->id[ATA_ID_BUF_SIZE] / 2); else - len = sprintf(out, "(none)\n"); + seq_printf(m, "(none)\n"); + return 0; +} - PROC_IDE_READ_RETURN(page, start, off, count, eof, len); +static int idedisk_cache_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, idedisk_cache_proc_show, PDE(inode)->data); } -static int proc_idedisk_read_capacity - (char *page, char **start, off_t off, int count, int *eof, void *data) +static const struct file_operations idedisk_cache_proc_fops = { + .owner = THIS_MODULE, + .open = idedisk_cache_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int idedisk_capacity_proc_show(struct seq_file *m, void *v) { - ide_drive_t*drive = (ide_drive_t *)data; - int len; + ide_drive_t*drive = (ide_drive_t *)m->private; - len = sprintf(page, "%llu\n", (long long)ide_gd_capacity(drive)); + seq_printf(m, "%llu\n", (long long)ide_gd_capacity(drive)); + return 0; +} - PROC_IDE_READ_RETURN(page, start, off, count, eof, len); +static int idedisk_capacity_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, idedisk_capacity_proc_show, PDE(inode)->data); } -static int proc_idedisk_read_smart(char *page, char **start, off_t off, - int count, int *eof, void *data, u8 sub_cmd) +static const struct file_operations idedisk_capacity_proc_fops = { + .owner = THIS_MODULE, + .open = idedisk_capacity_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int __idedisk_proc_show(struct seq_file *m, ide_drive_t *drive, u8 sub_cmd) { - ide_drive_t *drive = (ide_drive_t *)data; - int len = 0, i = 0; + u8 *buf; + + buf = kmalloc(SECTOR_SIZE, GFP_KERNEL); + if (!buf) + return -ENOMEM; (void)smart_enable(drive); - if (get_smart_data(drive, page, sub_cmd) == 0) { - unsigned short *val = (unsigned short *) page; - char *out = (char *)val + SECTOR_SIZE; - - page = out; - do { - out += sprintf(out, "%04x%c", le16_to_cpu(*val), - (++i & 7) ? ' ' : '\n'); - val += 1; - } while (i < SECTOR_SIZE / 2); - len = out - page; + if (get_smart_data(drive, buf, sub_cmd) == 0) { + __le16 *val = (__le16 *)buf; + int i; + + for (i = 0; i < SECTOR_SIZE / 2; i++) { + seq_printf(m, "%04x%c", le16_to_cpu(val[i]), + (i % 8) == 7 ? '\n' : ' '); + } } + kfree(buf); + return 0; +} - PROC_IDE_READ_RETURN(page, start, off, count, eof, len); +static int idedisk_sv_proc_show(struct seq_file *m, void *v) +{ + return __idedisk_proc_show(m, m->private, ATA_SMART_READ_VALUES); } -static int proc_idedisk_read_sv - (char *page, char **start, off_t off, int count, int *eof, void *data) +static int idedisk_sv_proc_open(struct inode *inode, struct file *file) { - return proc_idedisk_read_smart(page, start, off, count, eof, data, - ATA_SMART_READ_VALUES); + return single_open(file, idedisk_sv_proc_show, PDE(inode)->data); } -static int proc_idedisk_read_st - (char *page, char **start, off_t off, int count, int *eof, void *data) +static const struct file_operations idedisk_sv_proc_fops = { + .owner = THIS_MODULE, + .open = idedisk_sv_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int idedisk_st_proc_show(struct seq_file *m, void *v) { - return proc_idedisk_read_smart(page, start, off, count, eof, data, - ATA_SMART_READ_THRESHOLDS); + return __idedisk_proc_show(m, m->private, ATA_SMART_READ_THRESHOLDS); } +static int idedisk_st_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, idedisk_st_proc_show, PDE(inode)->data); +} + +static const struct file_operations idedisk_st_proc_fops = { + .owner = THIS_MODULE, + .open = idedisk_st_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + ide_proc_entry_t ide_disk_proc[] = { - { "cache", S_IFREG|S_IRUGO, proc_idedisk_read_cache, NULL }, - { "capacity", S_IFREG|S_IRUGO, proc_idedisk_read_capacity, NULL }, - { "geometry", S_IFREG|S_IRUGO, proc_ide_read_geometry, NULL }, - { "smart_values", S_IFREG|S_IRUSR, proc_idedisk_read_sv, NULL }, - { "smart_thresholds", S_IFREG|S_IRUSR, proc_idedisk_read_st, NULL }, - { NULL, 0, NULL, NULL } + { "cache", S_IFREG|S_IRUGO, &idedisk_cache_proc_fops }, + { "capacity", S_IFREG|S_IRUGO, &idedisk_capacity_proc_fops }, + { "geometry", S_IFREG|S_IRUGO, &ide_geometry_proc_fops }, + { "smart_values", S_IFREG|S_IRUSR, &idedisk_sv_proc_fops }, + { "smart_thresholds", S_IFREG|S_IRUSR, &idedisk_st_proc_fops }, + {} }; ide_devset_rw_field(bios_cyl, bios_cyl); diff --git a/drivers/ide/ide-floppy_proc.c b/drivers/ide/ide-floppy_proc.c index fcd4d81..d711d9b 100644 --- a/drivers/ide/ide-floppy_proc.c +++ b/drivers/ide/ide-floppy_proc.c @@ -1,22 +1,34 @@ #include #include +#include #include "ide-floppy.h" -static int proc_idefloppy_read_capacity(char *page, char **start, off_t off, - int count, int *eof, void *data) +static int idefloppy_capacity_proc_show(struct seq_file *m, void *v) { - ide_drive_t*drive = (ide_drive_t *)data; - int len; + ide_drive_t*drive = (ide_drive_t *)m->private; - len = sprintf(page, "%llu\n", (long long)ide_gd_capacity(drive)); - PROC_IDE_READ_RETURN(page, start, off, count, eof, len); + seq_printf(m, "%llu\n", (long long)ide_gd_capacity(drive)); + return 0; } +static int idefloppy_capacity_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, idefloppy_capacity_proc_show, PDE(inode)->data); +} + +static const struct file_operations idefloppy_capacity_proc_fops = { + .owner = THIS_MODULE, + .open = idefloppy_capacity_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + ide_proc_entry_t ide_floppy_proc[] = { - { "capacity", S_IFREG|S_IRUGO, proc_idefloppy_read_capacity, NULL }, - { "geometry", S_IFREG|S_IRUGO, proc_ide_read_geometry, NULL }, - { NULL, 0, NULL, NULL } + { "capacity", S_IFREG|S_IRUGO, &idefloppy_capacity_proc_fops }, + { "geometry", S_IFREG|S_IRUGO, &ide_geometry_proc_fops }, + {} }; ide_devset_rw_field(bios_cyl, bios_cyl); diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c index 021de41..28d09a5 100644 --- a/drivers/ide/ide-proc.c +++ b/drivers/ide/ide-proc.c @@ -30,11 +30,9 @@ static struct proc_dir_entry *proc_ide_root; -static int proc_ide_read_imodel - (char *page, char **start, off_t off, int count, int *eof, void *data) +static int ide_imodel_proc_show(struct seq_file *m, void *v) { - ide_hwif_t *hwif = (ide_hwif_t *) data; - int len; + ide_hwif_t *hwif = (ide_hwif_t *) m->private; const char *name; switch (hwif->chipset) { @@ -53,63 +51,108 @@ static int proc_ide_read_imodel case ide_acorn: name = "acorn"; break; default: name = "(unknown)"; break; } - len = sprintf(page, "%s\n", name); - PROC_IDE_READ_RETURN(page, start, off, count, eof, len); + seq_printf(m, "%s\n", name); + return 0; } -static int proc_ide_read_mate - (char *page, char **start, off_t off, int count, int *eof, void *data) +static int ide_imodel_proc_open(struct inode *inode, struct file *file) { - ide_hwif_t *hwif = (ide_hwif_t *) data; - int len; + return single_open(file, ide_imodel_proc_show, PDE(inode)->data); +} + +static const struct file_operations ide_imodel_proc_fops = { + .owner = THIS_MODULE, + .open = ide_imodel_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int ide_mate_proc_show(struct seq_file *m, void *v) +{ + ide_hwif_t *hwif = (ide_hwif_t *) m->private; if (hwif && hwif->mate) - len = sprintf(page, "%s\n", hwif->mate->name); + seq_printf(m, "%s\n", hwif->mate->name); else - len = sprintf(page, "(none)\n"); - PROC_IDE_READ_RETURN(page, start, off, count, eof, len); + seq_printf(m, "(none)\n"); + return 0; +} + +static int ide_mate_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, ide_mate_proc_show, PDE(inode)->data); } -static int proc_ide_read_channel - (char *page, char **start, off_t off, int count, int *eof, void *data) +static const struct file_operations ide_mate_proc_fops = { + .owner = THIS_MODULE, + .open = ide_mate_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int ide_channel_proc_show(struct seq_file *m, void *v) { - ide_hwif_t *hwif = (ide_hwif_t *) data; - int len; + ide_hwif_t *hwif = (ide_hwif_t *) m->private; - page[0] = hwif->channel ? '1' : '0'; - page[1] = '\n'; - len = 2; - PROC_IDE_READ_RETURN(page, start, off, count, eof, len); + seq_printf(m, "%c\n", hwif->channel ? '1' : '0'); + return 0; } -static int proc_ide_read_identify - (char *page, char **start, off_t off, int count, int *eof, void *data) +static int ide_channel_proc_open(struct inode *inode, struct file *file) { - ide_drive_t *drive = (ide_drive_t *)data; - int len = 0, i = 0; - int err = 0; + return single_open(file, ide_channel_proc_show, PDE(inode)->data); +} - len = sprintf(page, "\n"); +static const struct file_operations ide_channel_proc_fops = { + .owner = THIS_MODULE, + .open = ide_channel_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; - if (drive) { - __le16 *val = (__le16 *)page; +static int ide_identify_proc_show(struct seq_file *m, void *v) +{ + ide_drive_t *drive = (ide_drive_t *)m->private; + u8 *buf; - err = taskfile_lib_get_identify(drive, page); - if (!err) { - char *out = (char *)page + SECTOR_SIZE; + if (!drive) { + seq_putc(m, '\n'); + return 0; + } - page = out; - do { - out += sprintf(out, "%04x%c", - le16_to_cpup(val), (++i & 7) ? ' ' : '\n'); - val += 1; - } while (i < SECTOR_SIZE / 2); - len = out - page; + buf = kmalloc(SECTOR_SIZE, GFP_KERNEL); + if (!buf) + return -ENOMEM; + if (taskfile_lib_get_identify(drive, buf) == 0) { + __le16 *val = (__le16 *)buf; + int i; + + for (i = 0; i < SECTOR_SIZE / 2; i++) { + seq_printf(m, "%04x%c", le16_to_cpu(val[i]), + (i % 8) == 7 ? '\n' : ' '); } - } - PROC_IDE_READ_RETURN(page, start, off, count, eof, len); + } else + seq_putc(m, buf[0]); + kfree(buf); + return 0; +} + +static int ide_identify_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, ide_identify_proc_show, PDE(inode)->data); } +static const struct file_operations ide_identify_proc_fops = { + .owner = THIS_MODULE, + .open = ide_identify_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + /** * ide_find_setting - find a specific setting * @st: setting table pointer @@ -240,22 +283,20 @@ static void proc_ide_settings_warn(void) warned = 1; } -static int proc_ide_read_settings - (char *page, char **start, off_t off, int count, int *eof, void *data) +static int ide_settings_proc_show(struct seq_file *m, void *v) { const struct ide_proc_devset *setting, *g, *d; const struct ide_devset *ds; - ide_drive_t *drive = (ide_drive_t *) data; - char *out = page; - int len, rc, mul_factor, div_factor; + ide_drive_t *drive = (ide_drive_t *) m->private; + int rc, mul_factor, div_factor; proc_ide_settings_warn(); mutex_lock(&ide_setting_mtx); g = ide_generic_settings; d = drive->settings; - out += sprintf(out, "name\t\t\tvalue\t\tmin\t\tmax\t\tmode\n"); - out += sprintf(out, "----\t\t\t-----\t\t---\t\t---\t\t----\n"); + seq_printf(m, "name\t\t\tvalue\t\tmin\t\tmax\t\tmode\n"); + seq_printf(m, "----\t\t\t-----\t\t---\t\t---\t\t----\n"); while (g->name || (d && d->name)) { /* read settings in the alphabetical order */ if (g->name && d && d->name) { @@ -269,31 +310,35 @@ static int proc_ide_read_settings setting = g++; mul_factor = setting->mulf ? setting->mulf(drive) : 1; div_factor = setting->divf ? setting->divf(drive) : 1; - out += sprintf(out, "%-24s", setting->name); + seq_printf(m, "%-24s", setting->name); rc = ide_read_setting(drive, setting); if (rc >= 0) - out += sprintf(out, "%-16d", rc * mul_factor / div_factor); + seq_printf(m, "%-16d", rc * mul_factor / div_factor); else - out += sprintf(out, "%-16s", "write-only"); - out += sprintf(out, "%-16d%-16d", (setting->min * mul_factor + div_factor - 1) / div_factor, setting->max * mul_factor / div_factor); + seq_printf(m, "%-16s", "write-only"); + seq_printf(m, "%-16d%-16d", (setting->min * mul_factor + div_factor - 1) / div_factor, setting->max * mul_factor / div_factor); ds = setting->setting; if (ds->get) - out += sprintf(out, "r"); + seq_printf(m, "r"); if (ds->set) - out += sprintf(out, "w"); - out += sprintf(out, "\n"); + seq_printf(m, "w"); + seq_printf(m, "\n"); } - len = out - page; mutex_unlock(&ide_setting_mtx); - PROC_IDE_READ_RETURN(page, start, off, count, eof, len); + return 0; +} + +static int ide_settings_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, ide_settings_proc_show, PDE(inode)->data); } #define MAX_LEN 30 -static int proc_ide_write_settings(struct file *file, const char __user *buffer, - unsigned long count, void *data) +static ssize_t ide_settings_proc_write(struct file *file, const char __user *buffer, + size_t count, loff_t *pos) { - ide_drive_t *drive = (ide_drive_t *) data; + ide_drive_t *drive = (ide_drive_t *) PDE(file->f_path.dentry->d_inode)->data; char name[MAX_LEN + 1]; int for_real = 0, mul_factor, div_factor; unsigned long n; @@ -388,63 +433,104 @@ static int proc_ide_write_settings(struct file *file, const char __user *buffer, return count; parse_error: free_page((unsigned long)buf); - printk("proc_ide_write_settings(): parse error\n"); + printk("%s(): parse error\n", __func__); return -EINVAL; } -int proc_ide_read_capacity - (char *page, char **start, off_t off, int count, int *eof, void *data) +static const struct file_operations ide_settings_proc_fops = { + .owner = THIS_MODULE, + .open = ide_settings_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = ide_settings_proc_write, +}; + +static int ide_capacity_proc_show(struct seq_file *m, void *v) { - int len = sprintf(page, "%llu\n", (long long)0x7fffffff); - PROC_IDE_READ_RETURN(page, start, off, count, eof, len); + seq_printf(m, "%llu\n", (long long)0x7fffffff); + return 0; } -EXPORT_SYMBOL_GPL(proc_ide_read_capacity); +static int ide_capacity_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, ide_capacity_proc_show, NULL); +} -int proc_ide_read_geometry - (char *page, char **start, off_t off, int count, int *eof, void *data) +const struct file_operations ide_capacity_proc_fops = { + .owner = THIS_MODULE, + .open = ide_capacity_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; +EXPORT_SYMBOL_GPL(ide_capacity_proc_fops); + +static int ide_geometry_proc_show(struct seq_file *m, void *v) { - ide_drive_t *drive = (ide_drive_t *) data; - char *out = page; - int len; + ide_drive_t *drive = (ide_drive_t *) m->private; - out += sprintf(out, "physical %d/%d/%d\n", + seq_printf(m, "physical %d/%d/%d\n", drive->cyl, drive->head, drive->sect); - out += sprintf(out, "logical %d/%d/%d\n", + seq_printf(m, "logical %d/%d/%d\n", drive->bios_cyl, drive->bios_head, drive->bios_sect); + return 0; +} - len = out - page; - PROC_IDE_READ_RETURN(page, start, off, count, eof, len); +static int ide_geometry_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, ide_geometry_proc_show, PDE(inode)->data); } -EXPORT_SYMBOL(proc_ide_read_geometry); +const struct file_operations ide_geometry_proc_fops = { + .owner = THIS_MODULE, + .open = ide_geometry_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; +EXPORT_SYMBOL(ide_geometry_proc_fops); -static int proc_ide_read_dmodel - (char *page, char **start, off_t off, int count, int *eof, void *data) +static int ide_dmodel_proc_show(struct seq_file *seq, void *v) { - ide_drive_t *drive = (ide_drive_t *) data; + ide_drive_t *drive = (ide_drive_t *) seq->private; char *m = (char *)&drive->id[ATA_ID_PROD]; - int len; - len = sprintf(page, "%.40s\n", m[0] ? m : "(none)"); - PROC_IDE_READ_RETURN(page, start, off, count, eof, len); + seq_printf(seq, "%.40s\n", m[0] ? m : "(none)"); + return 0; +} + +static int ide_dmodel_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, ide_dmodel_proc_show, PDE(inode)->data); } -static int proc_ide_read_driver - (char *page, char **start, off_t off, int count, int *eof, void *data) +static const struct file_operations ide_dmodel_proc_fops = { + .owner = THIS_MODULE, + .open = ide_dmodel_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static int ide_driver_proc_show(struct seq_file *m, void *v) { - ide_drive_t *drive = (ide_drive_t *)data; + ide_drive_t *drive = (ide_drive_t *)m->private; struct device *dev = &drive->gendev; struct ide_driver *ide_drv; - int len; if (dev->driver) { ide_drv = to_ide_driver(dev->driver); - len = sprintf(page, "%s version %s\n", + seq_printf(m, "%s version %s\n", dev->driver->name, ide_drv->version); } else - len = sprintf(page, "ide-default version 0.9.newide\n"); - PROC_IDE_READ_RETURN(page, start, off, count, eof, len); + seq_printf(m, "ide-default version 0.9.newide\n"); + return 0; +} + +static int ide_driver_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, ide_driver_proc_show, PDE(inode)->data); } static int ide_replace_subdriver(ide_drive_t *drive, const char *driver) @@ -474,10 +560,10 @@ static int ide_replace_subdriver(ide_drive_t *drive, const char *driver) return ret; } -static int proc_ide_write_driver - (struct file *file, const char __user *buffer, unsigned long count, void *data) +static ssize_t ide_driver_proc_write(struct file *file, const char __user *buffer, + size_t count, loff_t *pos) { - ide_drive_t *drive = (ide_drive_t *) data; + ide_drive_t *drive = (ide_drive_t *) PDE(file->f_path.dentry->d_inode)->data; char name[32]; if (!capable(CAP_SYS_ADMIN)) @@ -492,12 +578,19 @@ static int proc_ide_write_driver return count; } -static int proc_ide_read_media - (char *page, char **start, off_t off, int count, int *eof, void *data) +static const struct file_operations ide_driver_proc_fops = { + .owner = THIS_MODULE, + .open = ide_driver_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .write = ide_driver_proc_write, +}; + +static int ide_media_proc_show(struct seq_file *m, void *v) { - ide_drive_t *drive = (ide_drive_t *) data; + ide_drive_t *drive = (ide_drive_t *) m->private; const char *media; - int len; switch (drive->media) { case ide_disk: media = "disk\n"; break; @@ -507,20 +600,30 @@ static int proc_ide_read_media case ide_optical: media = "optical\n"; break; default: media = "UNKNOWN\n"; break; } - strcpy(page, media); - len = strlen(media); - PROC_IDE_READ_RETURN(page, start, off, count, eof, len); + seq_puts(m, media); + return 0; +} + +static int ide_media_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, ide_media_proc_show, PDE(inode)->data); } +static const struct file_operations ide_media_proc_fops = { + .owner = THIS_MODULE, + .open = ide_media_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + static ide_proc_entry_t generic_drive_entries[] = { - { "driver", S_IFREG|S_IRUGO, proc_ide_read_driver, - proc_ide_write_driver }, - { "identify", S_IFREG|S_IRUSR, proc_ide_read_identify, NULL }, - { "media", S_IFREG|S_IRUGO, proc_ide_read_media, NULL }, - { "model", S_IFREG|S_IRUGO, proc_ide_read_dmodel, NULL }, - { "settings", S_IFREG|S_IRUSR|S_IWUSR, proc_ide_read_settings, - proc_ide_write_settings }, - { NULL, 0, NULL, NULL } + { "driver", S_IFREG|S_IRUGO, &ide_driver_proc_fops }, + { "identify", S_IFREG|S_IRUSR, &ide_identify_proc_fops}, + { "media", S_IFREG|S_IRUGO, &ide_media_proc_fops }, + { "model", S_IFREG|S_IRUGO, &ide_dmodel_proc_fops }, + { "settings", S_IFREG|S_IRUSR|S_IWUSR, &ide_settings_proc_fops}, + {} }; static void ide_add_proc_entries(struct proc_dir_entry *dir, ide_proc_entry_t *p, void *data) @@ -530,11 +633,8 @@ static void ide_add_proc_entries(struct proc_dir_entry *dir, ide_proc_entry_t *p if (!dir || !p) return; while (p->name != NULL) { - ent = create_proc_entry(p->name, p->mode, dir); + ent = proc_create_data(p->name, p->mode, dir, p->proc_fops, data); if (!ent) return; - ent->data = data; - ent->read_proc = p->read_proc; - ent->write_proc = p->write_proc; p++; } } @@ -617,10 +717,10 @@ void ide_proc_unregister_device(ide_drive_t *drive) } static ide_proc_entry_t hwif_entries[] = { - { "channel", S_IFREG|S_IRUGO, proc_ide_read_channel, NULL }, - { "mate", S_IFREG|S_IRUGO, proc_ide_read_mate, NULL }, - { "model", S_IFREG|S_IRUGO, proc_ide_read_imodel, NULL }, - { NULL, 0, NULL, NULL } + { "channel", S_IFREG|S_IRUGO, &ide_channel_proc_fops }, + { "mate", S_IFREG|S_IRUGO, &ide_mate_proc_fops }, + { "model", S_IFREG|S_IRUGO, &ide_imodel_proc_fops }, + {} }; void ide_proc_register_port(ide_hwif_t *hwif) diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index 7b2032b..9d6f62b 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include #include @@ -1816,22 +1817,32 @@ static void ide_tape_release(struct device *dev) } #ifdef CONFIG_IDE_PROC_FS -static int proc_idetape_read_name - (char *page, char **start, off_t off, int count, int *eof, void *data) +static int idetape_name_proc_show(struct seq_file *m, void *v) { - ide_drive_t *drive = (ide_drive_t *) data; + ide_drive_t *drive = (ide_drive_t *) m->private; idetape_tape_t *tape = drive->driver_data; - char *out = page; - int len; - len = sprintf(out, "%s\n", tape->name); - PROC_IDE_READ_RETURN(page, start, off, count, eof, len); + seq_printf(m, "%s\n", tape->name); + return 0; +} + +static int idetape_name_proc_open(struct inode *inode, struct file *file) +{ + return single_open(file, idetape_name_proc_show, PDE(inode)->data); } +static const struct file_operations idetape_name_proc_fops = { + .owner = THIS_MODULE, + .open = idetape_name_proc_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + static ide_proc_entry_t idetape_proc[] = { - { "capacity", S_IFREG|S_IRUGO, proc_ide_read_capacity, NULL }, - { "name", S_IFREG|S_IRUGO, proc_idetape_read_name, NULL }, - { NULL, 0, NULL, NULL } + { "capacity", S_IFREG|S_IRUGO, &ide_capacity_proc_fops }, + { "name", S_IFREG|S_IRUGO, &idetape_name_proc_fops }, + {} }; static ide_proc_entry_t *ide_tape_proc_entries(ide_drive_t *drive) -- cgit v1.1 From a2d10568fd3965fffeb29a3a6f29966dd3801727 Mon Sep 17 00:00:00 2001 From: Wu Zhangjin Date: Tue, 15 Sep 2009 01:36:25 -0700 Subject: ide: fixup for fujitsu disk This patch will fix the following problem on Yeeloong netbook with fujitsu disk. irq 14: nobody cared (try booting with the "irqpoll" option) Call Trace: [] dump_stack+0x8/0x40 [] __report_bad_irq+0x58/0xe4 [] note_interrupt+0x17c/0x23c [] handle_level_irq+0xcc/0x134 [] mach_irq_dispatch+0xb8/0x1e0 [] ret_from_irq+0x0/0x4 [] free_hot_cold_page+0x224/0x2a0 [] swsusp_free+0xb0/0x14c [] hibernate+0x198/0x218 [] state_store+0x90/0x138 [] sysfs_write_file+0x130/0x194 [] vfs_write+0xb8/0x180 [] SyS_write+0x50/0x98 [] handle_sys+0x158/0x174 handlers: [] (ide_intr+0x0/0x300) Disabling IRQ #14 References: 1. commit 1fde02e7146d4a1bab80fd1506f9018fe71e8521 of git://dev.lemote.com/linux_loongson.git 2. 8bc1e5aa06a2a9a425c4a6795fc564cba1521487 (ide: respect quirk_drives[] list on all controllers) Signed-off-by: Yan Hua Signed-off-by: Wu Zhangjin Signed-off-by: David S. Miller --- drivers/ide/ide-iops.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers') diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index b14fa9a..222c1ef 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -292,6 +292,7 @@ static const char *nien_quirk_list[] = { "QUANTUM FIREBALLP KX27.3", "QUANTUM FIREBALLP LM20.4", "QUANTUM FIREBALLP LM20.5", + "FUJITSU MHZ2160BH G2", NULL }; -- cgit v1.1