From 0365ba7fb1fa94a41289d6a3d36b4d95960e56cc Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Thu, 22 Sep 2005 21:44:06 -0700 Subject: [PATCH] ppc64: SMU driver update & i2c support The SMU is the "system controller" chip used by Apple recent G5 machines including the iMac G5. It drives things like fans, i2c busses, real time clock, etc... The current kernel contains a very crude driver that doesn't do much more than reading the real time clock synchronously. This is a completely rewritten driver that provides interrupt based command queuing, a userland interface, and an i2c/smbus driver for accessing the devices hanging off the SMU i2c busses like temperature sensors. This driver is a basic block for upcoming work on thermal control for those machines, among others. Signed-off-by: Benjamin Herrenschmidt Cc: Jean Delvare Cc: Greg KH Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/i2c/busses/Kconfig | 12 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-pmac-smu.c | 316 +++++++++++ drivers/macintosh/smu.c | 1030 +++++++++++++++++++++++++++++----- drivers/macintosh/therm_adt746x.c | 2 +- drivers/macintosh/therm_pm72.c | 2 +- drivers/macintosh/therm_windtunnel.c | 2 +- 7 files changed, 1223 insertions(+), 142 deletions(-) create mode 100644 drivers/i2c/busses/i2c-pmac-smu.c (limited to 'drivers') diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 8334496..3badfec 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -245,6 +245,18 @@ config I2C_KEYWEST This support is also available as a module. If so, the module will be called i2c-keywest. +config I2C_PMAC_SMU + tristate "Powermac SMU I2C interface" + depends on I2C && PMAC_SMU + help + This supports the use of the I2C interface in the SMU + chip on recent Apple machines like the iMac G5. It is used + among others by the thermal control driver for those machines. + Say Y if you have such a machine. + + This support is also available as a module. If so, the module + will be called i2c-pmac-smu. + config I2C_MPC tristate "MPC107/824x/85xx/52xx" depends on I2C && PPC32 diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 980b3e9..f1df00f 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -20,6 +20,7 @@ obj-$(CONFIG_I2C_ITE) += i2c-ite.o obj-$(CONFIG_I2C_IXP2000) += i2c-ixp2000.o obj-$(CONFIG_I2C_IXP4XX) += i2c-ixp4xx.o obj-$(CONFIG_I2C_KEYWEST) += i2c-keywest.o +obj-$(CONFIG_I2C_PMAC_SMU) += i2c-pmac-smu.o obj-$(CONFIG_I2C_MPC) += i2c-mpc.o obj-$(CONFIG_I2C_MV64XXX) += i2c-mv64xxx.o obj-$(CONFIG_I2C_NFORCE2) += i2c-nforce2.o diff --git a/drivers/i2c/busses/i2c-pmac-smu.c b/drivers/i2c/busses/i2c-pmac-smu.c new file mode 100644 index 0000000..8a9f564 --- /dev/null +++ b/drivers/i2c/busses/i2c-pmac-smu.c @@ -0,0 +1,316 @@ +/* + i2c Support for Apple SMU Controller + + Copyright (c) 2005 Benjamin Herrenschmidt, IBM Corp. + + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static int probe; + +MODULE_AUTHOR("Benjamin Herrenschmidt "); +MODULE_DESCRIPTION("I2C driver for Apple's SMU"); +MODULE_LICENSE("GPL"); +module_param(probe, bool, 0); + + +/* Physical interface */ +struct smu_iface +{ + struct i2c_adapter adapter; + struct completion complete; + u32 busid; +}; + +static void smu_i2c_done(struct smu_i2c_cmd *cmd, void *misc) +{ + struct smu_iface *iface = misc; + complete(&iface->complete); +} + +/* + * SMBUS-type transfer entrypoint + */ +static s32 smu_smbus_xfer( struct i2c_adapter* adap, + u16 addr, + unsigned short flags, + char read_write, + u8 command, + int size, + union i2c_smbus_data* data) +{ + struct smu_iface *iface = i2c_get_adapdata(adap); + struct smu_i2c_cmd cmd; + int rc = 0; + int read = (read_write == I2C_SMBUS_READ); + + cmd.info.bus = iface->busid; + cmd.info.devaddr = (addr << 1) | (read ? 0x01 : 0x00); + + /* Prepare datas & select mode */ + switch (size) { + case I2C_SMBUS_QUICK: + cmd.info.type = SMU_I2C_TRANSFER_SIMPLE; + cmd.info.datalen = 0; + break; + case I2C_SMBUS_BYTE: + cmd.info.type = SMU_I2C_TRANSFER_SIMPLE; + cmd.info.datalen = 1; + if (!read) + cmd.info.data[0] = data->byte; + break; + case I2C_SMBUS_BYTE_DATA: + cmd.info.type = SMU_I2C_TRANSFER_STDSUB; + cmd.info.datalen = 1; + cmd.info.sublen = 1; + cmd.info.subaddr[0] = command; + cmd.info.subaddr[1] = 0; + cmd.info.subaddr[2] = 0; + if (!read) + cmd.info.data[0] = data->byte; + break; + case I2C_SMBUS_WORD_DATA: + cmd.info.type = SMU_I2C_TRANSFER_STDSUB; + cmd.info.datalen = 2; + cmd.info.sublen = 1; + cmd.info.subaddr[0] = command; + cmd.info.subaddr[1] = 0; + cmd.info.subaddr[2] = 0; + if (!read) { + cmd.info.data[0] = data->byte & 0xff; + cmd.info.data[1] = (data->byte >> 8) & 0xff; + } + break; + /* Note that these are broken vs. the expected smbus API where + * on reads, the lenght is actually returned from the function, + * but I think the current API makes no sense and I don't want + * any driver that I haven't verified for correctness to go + * anywhere near a pmac i2c bus anyway ... + */ + case I2C_SMBUS_BLOCK_DATA: + cmd.info.type = SMU_I2C_TRANSFER_STDSUB; + cmd.info.datalen = data->block[0] + 1; + if (cmd.info.datalen > 6) + return -EINVAL; + if (!read) + memcpy(cmd.info.data, data->block, cmd.info.datalen); + cmd.info.sublen = 1; + cmd.info.subaddr[0] = command; + cmd.info.subaddr[1] = 0; + cmd.info.subaddr[2] = 0; + break; + case I2C_SMBUS_I2C_BLOCK_DATA: + cmd.info.type = SMU_I2C_TRANSFER_STDSUB; + cmd.info.datalen = data->block[0]; + if (cmd.info.datalen > 7) + return -EINVAL; + if (!read) + memcpy(cmd.info.data, &data->block[1], + cmd.info.datalen); + cmd.info.sublen = 1; + cmd.info.subaddr[0] = command; + cmd.info.subaddr[1] = 0; + cmd.info.subaddr[2] = 0; + break; + + default: + return -EINVAL; + } + + /* Turn a standardsub read into a combined mode access */ + if (read_write == I2C_SMBUS_READ && + cmd.info.type == SMU_I2C_TRANSFER_STDSUB) + cmd.info.type = SMU_I2C_TRANSFER_COMBINED; + + /* Finish filling command and submit it */ + cmd.done = smu_i2c_done; + cmd.misc = iface; + rc = smu_queue_i2c(&cmd); + if (rc < 0) + return rc; + wait_for_completion(&iface->complete); + rc = cmd.status; + + if (!read || rc < 0) + return rc; + + switch (size) { + case I2C_SMBUS_BYTE: + case I2C_SMBUS_BYTE_DATA: + data->byte = cmd.info.data[0]; + break; + case I2C_SMBUS_WORD_DATA: + data->word = ((u16)cmd.info.data[1]) << 8; + data->word |= cmd.info.data[0]; + break; + /* Note that these are broken vs. the expected smbus API where + * on reads, the lenght is actually returned from the function, + * but I think the current API makes no sense and I don't want + * any driver that I haven't verified for correctness to go + * anywhere near a pmac i2c bus anyway ... + */ + case I2C_SMBUS_BLOCK_DATA: + case I2C_SMBUS_I2C_BLOCK_DATA: + memcpy(&data->block[0], cmd.info.data, cmd.info.datalen); + break; + } + + return rc; +} + +static u32 +smu_smbus_func(struct i2c_adapter * adapter) +{ + return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | + I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA | + I2C_FUNC_SMBUS_BLOCK_DATA; +} + +/* For now, we only handle combined mode (smbus) */ +static struct i2c_algorithm smu_algorithm = { + .smbus_xfer = smu_smbus_xfer, + .functionality = smu_smbus_func, +}; + +static int create_iface(struct device_node *np, struct device *dev) +{ + struct smu_iface* iface; + u32 *reg, busid; + int rc; + + reg = (u32 *)get_property(np, "reg", NULL); + if (reg == NULL) { + printk(KERN_ERR "i2c-pmac-smu: can't find bus number !\n"); + return -ENXIO; + } + busid = *reg; + + iface = kmalloc(sizeof(struct smu_iface), GFP_KERNEL); + if (iface == NULL) { + printk(KERN_ERR "i2c-pmac-smu: can't allocate inteface !\n"); + return -ENOMEM; + } + memset(iface, 0, sizeof(struct smu_iface)); + init_completion(&iface->complete); + iface->busid = busid; + + dev_set_drvdata(dev, iface); + + sprintf(iface->adapter.name, "smu-i2c-%02x", busid); + iface->adapter.algo = &smu_algorithm; + iface->adapter.algo_data = NULL; + iface->adapter.client_register = NULL; + iface->adapter.client_unregister = NULL; + i2c_set_adapdata(&iface->adapter, iface); + iface->adapter.dev.parent = dev; + + rc = i2c_add_adapter(&iface->adapter); + if (rc) { + printk(KERN_ERR "i2c-pamc-smu.c: Adapter %s registration " + "failed\n", iface->adapter.name); + i2c_set_adapdata(&iface->adapter, NULL); + } + + if (probe) { + unsigned char addr; + printk("Probe: "); + for (addr = 0x00; addr <= 0x7f; addr++) { + if (i2c_smbus_xfer(&iface->adapter,addr, + 0,0,0,I2C_SMBUS_QUICK,NULL) >= 0) + printk("%02x ", addr); + } + printk("\n"); + } + + printk(KERN_INFO "SMU i2c bus %x registered\n", busid); + + return 0; +} + +static int dispose_iface(struct device *dev) +{ + struct smu_iface *iface = dev_get_drvdata(dev); + int rc; + + rc = i2c_del_adapter(&iface->adapter); + i2c_set_adapdata(&iface->adapter, NULL); + /* We aren't that prepared to deal with this... */ + if (rc) + printk("i2c-pmac-smu.c: Failed to remove bus %s !\n", + iface->adapter.name); + dev_set_drvdata(dev, NULL); + kfree(iface); + + return 0; +} + + +static int create_iface_of_platform(struct of_device* dev, + const struct of_device_id *match) +{ + return create_iface(dev->node, &dev->dev); +} + + +static int dispose_iface_of_platform(struct of_device* dev) +{ + return dispose_iface(&dev->dev); +} + + +static struct of_device_id i2c_smu_match[] = +{ + { + .compatible = "smu-i2c", + }, + {}, +}; +static struct of_platform_driver i2c_smu_of_platform_driver = +{ + .name = "i2c-smu", + .match_table = i2c_smu_match, + .probe = create_iface_of_platform, + .remove = dispose_iface_of_platform +}; + + +static int __init i2c_pmac_smu_init(void) +{ + of_register_driver(&i2c_smu_of_platform_driver); + return 0; +} + + +static void __exit i2c_pmac_smu_cleanup(void) +{ + of_unregister_driver(&i2c_smu_of_platform_driver); +} + +module_init(i2c_pmac_smu_init); +module_exit(i2c_pmac_smu_cleanup); diff --git a/drivers/macintosh/smu.c b/drivers/macintosh/smu.c index fb53573..a85ac18 100644 --- a/drivers/macintosh/smu.c +++ b/drivers/macintosh/smu.c @@ -8,21 +8,15 @@ */ /* - * For now, this driver includes: - * - RTC get & set - * - reboot & shutdown commands - * all synchronous with IRQ disabled (ugh) - * * TODO: - * rework in a way the PMU driver works, that is asynchronous - * with a queue of commands. I'll do that as soon as I have an - * SMU based machine at hand. Some more cleanup is needed too, - * like maybe fitting it into a platform device, etc... - * Also check what's up with cache coherency, and if we really - * can't do better than flushing the cache, maybe build a table - * of command len/reply len like the PMU driver to only flush - * what is actually necessary. - * --BenH. + * - maybe add timeout to commands ? + * - blocking version of time functions + * - polling version of i2c commands (including timer that works with + * interrutps off) + * - maybe avoid some data copies with i2c by directly using the smu cmd + * buffer and a lower level internal interface + * - understand SMU -> CPU events and implement reception of them via + * the userland interface */ #include @@ -36,6 +30,11 @@ #include #include #include +#include +#include +#include +#include +#include #include #include @@ -45,8 +44,13 @@ #include #include #include +#include +#include + +#define VERSION "0.6" +#define AUTHOR "(c) 2005 Benjamin Herrenschmidt, IBM Corp." -#define DEBUG_SMU 1 +#undef DEBUG_SMU #ifdef DEBUG_SMU #define DPRINTK(fmt, args...) do { printk(KERN_DEBUG fmt , ##args); } while (0) @@ -57,20 +61,30 @@ /* * This is the command buffer passed to the SMU hardware */ +#define SMU_MAX_DATA 254 + struct smu_cmd_buf { u8 cmd; u8 length; - u8 data[0x0FFE]; + u8 data[SMU_MAX_DATA]; }; struct smu_device { spinlock_t lock; struct device_node *of_node; - int db_ack; /* doorbell ack GPIO */ - int db_req; /* doorbell req GPIO */ + struct of_device *of_dev; + int doorbell; /* doorbell gpio */ u32 __iomem *db_buf; /* doorbell buffer */ + int db_irq; + int msg; + int msg_irq; struct smu_cmd_buf *cmd_buf; /* command buffer virtual */ u32 cmd_buf_abs; /* command buffer absolute */ + struct list_head cmd_list; + struct smu_cmd *cmd_cur; /* pending command */ + struct list_head cmd_i2c_list; + struct smu_i2c_cmd *cmd_i2c_cur; /* pending i2c command */ + struct timer_list i2c_timer; }; /* @@ -79,113 +93,243 @@ struct smu_device { */ static struct smu_device *smu; + /* - * SMU low level communication stuff + * SMU driver low level stuff */ -static inline int smu_cmd_stat(struct smu_cmd_buf *cmd_buf, u8 cmd_ack) -{ - rmb(); - return cmd_buf->cmd == cmd_ack && cmd_buf->length != 0; -} -static inline u8 smu_save_ack_cmd(struct smu_cmd_buf *cmd_buf) +static void smu_start_cmd(void) { - return (~cmd_buf->cmd) & 0xff; -} + unsigned long faddr, fend; + struct smu_cmd *cmd; -static void smu_send_cmd(struct smu_device *dev) -{ - /* SMU command buf is currently cacheable, we need a physical - * address. This isn't exactly a DMA mapping here, I suspect + if (list_empty(&smu->cmd_list)) + return; + + /* Fetch first command in queue */ + cmd = list_entry(smu->cmd_list.next, struct smu_cmd, link); + smu->cmd_cur = cmd; + list_del(&cmd->link); + + DPRINTK("SMU: starting cmd %x, %d bytes data\n", cmd->cmd, + cmd->data_len); + DPRINTK("SMU: data buffer: %02x %02x %02x %02x ...\n", + ((u8 *)cmd->data_buf)[0], ((u8 *)cmd->data_buf)[1], + ((u8 *)cmd->data_buf)[2], ((u8 *)cmd->data_buf)[3]); + + /* Fill the SMU command buffer */ + smu->cmd_buf->cmd = cmd->cmd; + smu->cmd_buf->length = cmd->data_len; + memcpy(smu->cmd_buf->data, cmd->data_buf, cmd->data_len); + + /* Flush command and data to RAM */ + faddr = (unsigned long)smu->cmd_buf; + fend = faddr + smu->cmd_buf->length + 2; + flush_inval_dcache_range(faddr, fend); + + /* This isn't exactly a DMA mapping here, I suspect * the SMU is actually communicating with us via i2c to the * northbridge or the CPU to access RAM. */ - writel(dev->cmd_buf_abs, dev->db_buf); + writel(smu->cmd_buf_abs, smu->db_buf); /* Ring the SMU doorbell */ - pmac_do_feature_call(PMAC_FTR_WRITE_GPIO, NULL, dev->db_req, 4); - pmac_do_feature_call(PMAC_FTR_READ_GPIO, NULL, dev->db_req, 4); + pmac_do_feature_call(PMAC_FTR_WRITE_GPIO, NULL, smu->doorbell, 4); } -static int smu_cmd_done(struct smu_device *dev) + +static irqreturn_t smu_db_intr(int irq, void *arg, struct pt_regs *regs) { - unsigned long wait = 0; - int gpio; + unsigned long flags; + struct smu_cmd *cmd; + void (*done)(struct smu_cmd *cmd, void *misc) = NULL; + void *misc = NULL; + u8 gpio; + int rc = 0; - /* Check the SMU doorbell */ - do { - gpio = pmac_do_feature_call(PMAC_FTR_READ_GPIO, - NULL, dev->db_ack); - if ((gpio & 7) == 7) - return 0; - udelay(100); - } while(++wait < 10000); + /* SMU completed the command, well, we hope, let's make sure + * of it + */ + spin_lock_irqsave(&smu->lock, flags); - printk(KERN_ERR "SMU timeout !\n"); - return -ENXIO; + gpio = pmac_do_feature_call(PMAC_FTR_READ_GPIO, NULL, smu->doorbell); + if ((gpio & 7) != 7) + return IRQ_HANDLED; + + cmd = smu->cmd_cur; + smu->cmd_cur = NULL; + if (cmd == NULL) + goto bail; + + if (rc == 0) { + unsigned long faddr; + int reply_len; + u8 ack; + + /* CPU might have brought back the cache line, so we need + * to flush again before peeking at the SMU response. We + * flush the entire buffer for now as we haven't read the + * reply lenght (it's only 2 cache lines anyway) + */ + faddr = (unsigned long)smu->cmd_buf; + flush_inval_dcache_range(faddr, faddr + 256); + + /* Now check ack */ + ack = (~cmd->cmd) & 0xff; + if (ack != smu->cmd_buf->cmd) { + DPRINTK("SMU: incorrect ack, want %x got %x\n", + ack, smu->cmd_buf->cmd); + rc = -EIO; + } + reply_len = rc == 0 ? smu->cmd_buf->length : 0; + DPRINTK("SMU: reply len: %d\n", reply_len); + if (reply_len > cmd->reply_len) { + printk(KERN_WARNING "SMU: reply buffer too small," + "got %d bytes for a %d bytes buffer\n", + reply_len, cmd->reply_len); + reply_len = cmd->reply_len; + } + cmd->reply_len = reply_len; + if (cmd->reply_buf && reply_len) + memcpy(cmd->reply_buf, smu->cmd_buf->data, reply_len); + } + + /* Now complete the command. Write status last in order as we lost + * ownership of the command structure as soon as it's no longer -1 + */ + done = cmd->done; + misc = cmd->misc; + mb(); + cmd->status = rc; + bail: + /* Start next command if any */ + smu_start_cmd(); + spin_unlock_irqrestore(&smu->lock, flags); + + /* Call command completion handler if any */ + if (done) + done(cmd, misc); + + /* It's an edge interrupt, nothing to do */ + return IRQ_HANDLED; } -static int smu_do_cmd(struct smu_device *dev) + +static irqreturn_t smu_msg_intr(int irq, void *arg, struct pt_regs *regs) { - int rc; - u8 cmd_ack; + /* I don't quite know what to do with this one, we seem to never + * receive it, so I suspect we have to arm it someway in the SMU + * to start getting events that way. + */ + + printk(KERN_INFO "SMU: message interrupt !\n"); - DPRINTK("SMU do_cmd %02x len=%d %02x\n", - dev->cmd_buf->cmd, dev->cmd_buf->length, - dev->cmd_buf->data[0]); + /* It's an edge interrupt, nothing to do */ + return IRQ_HANDLED; +} - cmd_ack = smu_save_ack_cmd(dev->cmd_buf); - /* Clear cmd_buf cache lines */ - flush_inval_dcache_range((unsigned long)dev->cmd_buf, - ((unsigned long)dev->cmd_buf) + - sizeof(struct smu_cmd_buf)); - smu_send_cmd(dev); - rc = smu_cmd_done(dev); - if (rc == 0) - rc = smu_cmd_stat(dev->cmd_buf, cmd_ack) ? 0 : -1; +/* + * Queued command management. + * + */ - DPRINTK("SMU do_cmd %02x len=%d %02x => %d (%02x)\n", - dev->cmd_buf->cmd, dev->cmd_buf->length, - dev->cmd_buf->data[0], rc, cmd_ack); +int smu_queue_cmd(struct smu_cmd *cmd) +{ + unsigned long flags; - return rc; + if (smu == NULL) + return -ENODEV; + if (cmd->data_len > SMU_MAX_DATA || + cmd->reply_len > SMU_MAX_DATA) + return -EINVAL; + + cmd->status = 1; + spin_lock_irqsave(&smu->lock, flags); + list_add_tail(&cmd->link, &smu->cmd_list); + if (smu->cmd_cur == NULL) + smu_start_cmd(); + spin_unlock_irqrestore(&smu->lock, flags); + + return 0; } +EXPORT_SYMBOL(smu_queue_cmd); -/* RTC low level commands */ -static inline int bcd2hex (int n) + +int smu_queue_simple(struct smu_simple_cmd *scmd, u8 command, + unsigned int data_len, + void (*done)(struct smu_cmd *cmd, void *misc), + void *misc, ...) { - return (((n & 0xf0) >> 4) * 10) + (n & 0xf); + struct smu_cmd *cmd = &scmd->cmd; + va_list list; + int i; + + if (data_len > sizeof(scmd->buffer)) + return -EINVAL; + + memset(scmd, 0, sizeof(*scmd)); + cmd->cmd = command; + cmd->data_len = data_len; + cmd->data_buf = scmd->buffer; + cmd->reply_len = sizeof(scmd->buffer); + cmd->reply_buf = scmd->buffer; + cmd->done = done; + cmd->misc = misc; + + va_start(list, misc); + for (i = 0; i < data_len; ++i) + scmd->buffer[i] = (u8)va_arg(list, int); + va_end(list); + + return smu_queue_cmd(cmd); } +EXPORT_SYMBOL(smu_queue_simple); -static inline int hex2bcd (int n) + +void smu_poll(void) { - return ((n / 10) << 4) + (n % 10); + u8 gpio; + + if (smu == NULL) + return; + + gpio = pmac_do_feature_call(PMAC_FTR_READ_GPIO, NULL, smu->doorbell); + if ((gpio & 7) == 7) + smu_db_intr(smu->db_irq, smu, NULL); } +EXPORT_SYMBOL(smu_poll); + -#if 0 -static inline void smu_fill_set_pwrup_timer_cmd(struct smu_cmd_buf *cmd_buf) +void smu_done_complete(struct smu_cmd *cmd, void *misc) { - cmd_buf->cmd = 0x8e; - cmd_buf->length = 8; - cmd_buf->data[0] = 0x00; - memset(cmd_buf->data + 1, 0, 7); + struct completion *comp = misc; + + complete(comp); } +EXPORT_SYMBOL(smu_done_complete); + -static inline void smu_fill_get_pwrup_timer_cmd(struct smu_cmd_buf *cmd_buf) +void smu_spinwait_cmd(struct smu_cmd *cmd) { - cmd_buf->cmd = 0x8e; - cmd_buf->length = 1; - cmd_buf->data[0] = 0x01; + while(cmd->status == 1) + smu_poll(); +} +EXPORT_SYMBOL(smu_spinwait_cmd); + + +/* RTC low level commands */ +static inline int bcd2hex (int n) +{ + return (((n & 0xf0) >> 4) * 10) + (n & 0xf); } -static inline void smu_fill_dis_pwrup_timer_cmd(struct smu_cmd_buf *cmd_buf) + +static inline int hex2bcd (int n) { - cmd_buf->cmd = 0x8e; - cmd_buf->length = 1; - cmd_buf->data[0] = 0x02; + return ((n / 10) << 4) + (n % 10); } -#endif + static inline void smu_fill_set_rtc_cmd(struct smu_cmd_buf *cmd_buf, struct rtc_time *time) @@ -202,100 +346,96 @@ static inline void smu_fill_set_rtc_cmd(struct smu_cmd_buf *cmd_buf, cmd_buf->data[7] = hex2bcd(time->tm_year - 100); } -static inline void smu_fill_get_rtc_cmd(struct smu_cmd_buf *cmd_buf) -{ - cmd_buf->cmd = 0x8e; - cmd_buf->length = 1; - cmd_buf->data[0] = 0x81; -} -static void smu_parse_get_rtc_reply(struct smu_cmd_buf *cmd_buf, - struct rtc_time *time) +int smu_get_rtc_time(struct rtc_time *time, int spinwait) { - time->tm_sec = bcd2hex(cmd_buf->data[0]); - time->tm_min = bcd2hex(cmd_buf->data[1]); - time->tm_hour = bcd2hex(cmd_buf->data[2]); - time->tm_wday = bcd2hex(cmd_buf->data[3]); - time->tm_mday = bcd2hex(cmd_buf->data[4]); - time->tm_mon = bcd2hex(cmd_buf->data[5]) - 1; - time->tm_year = bcd2hex(cmd_buf->data[6]) + 100; -} - -int smu_get_rtc_time(struct rtc_time *time) -{ - unsigned long flags; + struct smu_simple_cmd cmd; int rc; if (smu == NULL) return -ENODEV; memset(time, 0, sizeof(struct rtc_time)); - spin_lock_irqsave(&smu->lock, flags); - smu_fill_get_rtc_cmd(smu->cmd_buf); - rc = smu_do_cmd(smu); - if (rc == 0) - smu_parse_get_rtc_reply(smu->cmd_buf, time); - spin_unlock_irqrestore(&smu->lock, flags); + rc = smu_queue_simple(&cmd, SMU_CMD_RTC_COMMAND, 1, NULL, NULL, + SMU_CMD_RTC_GET_DATETIME); + if (rc) + return rc; + smu_spinwait_simple(&cmd); - return rc; + time->tm_sec = bcd2hex(cmd.buffer[0]); + time->tm_min = bcd2hex(cmd.buffer[1]); + time->tm_hour = bcd2hex(cmd.buffer[2]); + time->tm_wday = bcd2hex(cmd.buffer[3]); + time->tm_mday = bcd2hex(cmd.buffer[4]); + time->tm_mon = bcd2hex(cmd.buffer[5]) - 1; + time->tm_year = bcd2hex(cmd.buffer[6]) + 100; + + return 0; } -int smu_set_rtc_time(struct rtc_time *time) + +int smu_set_rtc_time(struct rtc_time *time, int spinwait) { - unsigned long flags; + struct smu_simple_cmd cmd; int rc; if (smu == NULL) return -ENODEV; - spin_lock_irqsave(&smu->lock, flags); - smu_fill_set_rtc_cmd(smu->cmd_buf, time); - rc = smu_do_cmd(smu); - spin_unlock_irqrestore(&smu->lock, flags); + rc = smu_queue_simple(&cmd, SMU_CMD_RTC_COMMAND, 8, NULL, NULL, + SMU_CMD_RTC_SET_DATETIME, + hex2bcd(time->tm_sec), + hex2bcd(time->tm_min), + hex2bcd(time->tm_hour), + time->tm_wday, + hex2bcd(time->tm_mday), + hex2bcd(time->tm_mon) + 1, + hex2bcd(time->tm_year - 100)); + if (rc) + return rc; + smu_spinwait_simple(&cmd); - return rc; + return 0; } + void smu_shutdown(void) { - const unsigned char *command = "SHUTDOWN"; - unsigned long flags; + struct smu_simple_cmd cmd; if (smu == NULL) return; - spin_lock_irqsave(&smu->lock, flags); - smu->cmd_buf->cmd = 0xaa; - smu->cmd_buf->length = strlen(command); - strcpy(smu->cmd_buf->data, command); - smu_do_cmd(smu); + if (smu_queue_simple(&cmd, SMU_CMD_POWER_COMMAND, 9, NULL, NULL, + 'S', 'H', 'U', 'T', 'D', 'O', 'W', 'N', 0)) + return; + smu_spinwait_simple(&cmd); for (;;) ; - spin_unlock_irqrestore(&smu->lock, flags); } + void smu_restart(void) { - const unsigned char *command = "RESTART"; - unsigned long flags; + struct smu_simple_cmd cmd; if (smu == NULL) return; - spin_lock_irqsave(&smu->lock, flags); - smu->cmd_buf->cmd = 0xaa; - smu->cmd_buf->length = strlen(command); - strcpy(smu->cmd_buf->data, command); - smu_do_cmd(smu); + if (smu_queue_simple(&cmd, SMU_CMD_POWER_COMMAND, 8, NULL, NULL, + 'R', 'E', 'S', 'T', 'A', 'R', 'T', 0)) + return; + smu_spinwait_simple(&cmd); for (;;) ; - spin_unlock_irqrestore(&smu->lock, flags); } + int smu_present(void) { return smu != NULL; } +EXPORT_SYMBOL(smu_present); int smu_init (void) @@ -307,6 +447,8 @@ int smu_init (void) if (np == NULL) return -ENODEV; + printk(KERN_INFO "SMU driver %s %s\n", VERSION, AUTHOR); + if (smu_cmdbuf_abs == 0) { printk(KERN_ERR "SMU: Command buffer not allocated !\n"); return -EINVAL; @@ -318,7 +460,13 @@ int smu_init (void) memset(smu, 0, sizeof(*smu)); spin_lock_init(&smu->lock); + INIT_LIST_HEAD(&smu->cmd_list); + INIT_LIST_HEAD(&smu->cmd_i2c_list); smu->of_node = np; + smu->db_irq = NO_IRQ; + smu->msg_irq = NO_IRQ; + init_timer(&smu->i2c_timer); + /* smu_cmdbuf_abs is in the low 2G of RAM, can be converted to a * 32 bits value safely */ @@ -331,8 +479,8 @@ int smu_init (void) goto fail; } data = (u32 *)get_property(np, "reg", NULL); - of_node_put(np); if (data == NULL) { + of_node_put(np); printk(KERN_ERR "SMU: Can't find doorbell GPIO address !\n"); goto fail; } @@ -341,8 +489,31 @@ int smu_init (void) * and ack. GPIOs are at 0x50, best would be to find that out * in the device-tree though. */ - smu->db_req = 0x50 + *data; - smu->db_ack = 0x50 + *data; + smu->doorbell = *data; + if (smu->doorbell < 0x50) + smu->doorbell += 0x50; + if (np->n_intrs > 0) + smu->db_irq = np->intrs[0].line; + + of_node_put(np); + + /* Now look for the smu-interrupt GPIO */ + do { + np = of_find_node_by_name(NULL, "smu-interrupt"); + if (np == NULL) + break; + data = (u32 *)get_property(np, "reg", NULL); + if (data == NULL) { + of_node_put(np); + break; + } + smu->msg = *data; + if (smu->msg < 0x50) + smu->msg += 0x50; + if (np->n_intrs > 0) + smu->msg_irq = np->intrs[0].line; + of_node_put(np); + } while(0); /* Doorbell buffer is currently hard-coded, I didn't find a proper * device-tree entry giving the address. Best would probably to use @@ -362,3 +533,584 @@ int smu_init (void) return -ENXIO; } + + +static int smu_late_init(void) +{ + if (!smu) + return 0; + + /* + * Try to request the interrupts + */ + + if (smu->db_irq != NO_IRQ) { + if (request_irq(smu->db_irq, smu_db_intr, + SA_SHIRQ, "SMU doorbell", smu) < 0) { + printk(KERN_WARNING "SMU: can't " + "request interrupt %d\n", + smu->db_irq); + smu->db_irq = NO_IRQ; + } + } + + if (smu->msg_irq != NO_IRQ) { + if (request_irq(smu->msg_irq, smu_msg_intr, + SA_SHIRQ, "SMU message", smu) < 0) { + printk(KERN_WARNING "SMU: can't " + "request interrupt %d\n", + smu->msg_irq); + smu->msg_irq = NO_IRQ; + } + } + + return 0; +} +arch_initcall(smu_late_init); + +/* + * sysfs visibility + */ + +static void smu_expose_childs(void *unused) +{ + struct device_node *np; + + for (np = NULL; (np = of_get_next_child(smu->of_node, np)) != NULL;) { + if (device_is_compatible(np, "smu-i2c")) { + char name[32]; + u32 *reg = (u32 *)get_property(np, "reg", NULL); + + if (reg == NULL) + continue; + sprintf(name, "smu-i2c-%02x", *reg); + of_platform_device_create(np, name, &smu->of_dev->dev); + } + } + +} + +static DECLARE_WORK(smu_expose_childs_work, smu_expose_childs, NULL); + +static int smu_platform_probe(struct of_device* dev, + const struct of_device_id *match) +{ + if (!smu) + return -ENODEV; + smu->of_dev = dev; + + /* + * Ok, we are matched, now expose all i2c busses. We have to defer + * that unfortunately or it would deadlock inside the device model + */ + schedule_work(&smu_expose_childs_work); + + return 0; +} + +static struct of_device_id smu_platform_match[] = +{ + { + .type = "smu", + }, + {}, +}; + +static struct of_platform_driver smu_of_platform_driver = +{ + .name = "smu", + .match_table = smu_platform_match, + .probe = smu_platform_probe, +}; + +static int __init smu_init_sysfs(void) +{ + int rc; + + /* + * Due to sysfs bogosity, a sysdev is not a real device, so + * we should in fact create both if we want sysdev semantics + * for power management. + * For now, we don't power manage machines with an SMU chip, + * I'm a bit too far from figuring out how that works with those + * new chipsets, but that will come back and bite us + */ + rc = of_register_driver(&smu_of_platform_driver); + return 0; +} + +device_initcall(smu_init_sysfs); + +struct of_device *smu_get_ofdev(void) +{ + if (!smu) + return NULL; + return smu->of_dev; +} + +EXPORT_SYMBOL_GPL(smu_get_ofdev); + +/* + * i2c interface + */ + +static void smu_i2c_complete_command(struct smu_i2c_cmd *cmd, int fail) +{ + void (*done)(struct smu_i2c_cmd *cmd, void *misc) = cmd->done; + void *misc = cmd->misc; + unsigned long flags; + + /* Check for read case */ + if (!fail && cmd->read) { + if (cmd->pdata[0] < 1) + fail = 1; + else + memcpy(cmd->info.data, &cmd->pdata[1], + cmd->info.datalen); + } + + DPRINTK("SMU: completing, success: %d\n", !fail); + + /* Update status and mark no pending i2c command with lock + * held so nobody comes in while we dequeue an eventual + * pending next i2c command + */ + spin_lock_irqsave(&smu->lock, flags); + smu->cmd_i2c_cur = NULL; + wmb(); + cmd->status = fail ? -EIO : 0; + + /* Is there another i2c command waiting ? */ + if (!list_empty(&smu->cmd_i2c_list)) { + struct smu_i2c_cmd *newcmd; + + /* Fetch it, new current, remove from list */ + newcmd = list_entry(smu->cmd_i2c_list.next, + struct smu_i2c_cmd, link); + smu->cmd_i2c_cur = newcmd; + list_del(&cmd->link); + + /* Queue with low level smu */ + list_add_tail(&cmd->scmd.link, &smu->cmd_list); + if (smu->cmd_cur == NULL) + smu_start_cmd(); + } + spin_unlock_irqrestore(&smu->lock, flags); + + /* Call command completion handler if any */ + if (done) + done(cmd, misc); + +} + + +static void smu_i2c_retry(unsigned long data) +{ + struct smu_i2c_cmd *cmd = (struct smu_i2c_cmd *)data; + + DPRINTK("SMU: i2c failure, requeuing...\n"); + + /* requeue command simply by resetting reply_len */ + cmd->pdata[0] = 0xff; + cmd->scmd.reply_len = 0x10; + smu_queue_cmd(&cmd->scmd); +} + + +static void smu_i2c_low_completion(struct smu_cmd *scmd, void *misc) +{ + struct smu_i2c_cmd *cmd = misc; + int fail = 0; + + DPRINTK("SMU: i2c compl. stage=%d status=%x pdata[0]=%x rlen: %x\n", + cmd->stage, scmd->status, cmd->pdata[0], scmd->reply_len); + + /* Check for possible status */ + if (scmd->status < 0) + fail = 1; + else if (cmd->read) { + if (cmd->stage == 0) + fail = cmd->pdata[0] != 0; + else + fail = cmd->pdata[0] >= 0x80; + } else { + fail = cmd->pdata[0] != 0; + } + + /* Handle failures by requeuing command, after 5ms interval + */ + if (fail && --cmd->retries > 0) { + DPRINTK("SMU: i2c failure, starting timer...\n"); + smu->i2c_timer.function = smu_i2c_retry; + smu->i2c_timer.data = (unsigned long)cmd; + smu->i2c_timer.expires = jiffies + msecs_to_jiffies(5); + add_timer(&smu->i2c_timer); + return; + } + + /* If failure or stage 1, command is complete */ + if (fail || cmd->stage != 0) { + smu_i2c_complete_command(cmd, fail); + return; + } + + DPRINTK("SMU: going to stage 1\n"); + + /* Ok, initial command complete, now poll status */ + scmd->reply_buf = cmd->pdata; + scmd->reply_len = 0x10; + scmd->data_buf = cmd->pdata; + scmd->data_len = 1; + cmd->pdata[0] = 0; + cmd->stage = 1; + cmd->retries = 20; + smu_queue_cmd(scmd); +} + + +int smu_queue_i2c(struct smu_i2c_cmd *cmd) +{ + unsigned long flags; + + if (smu == NULL) + return -ENODEV; + + /* Fill most fields of scmd */ + cmd->scmd.cmd = SMU_CMD_I2C_COMMAND; + cmd->scmd.done = smu_i2c_low_completion; + cmd->scmd.misc = cmd; + cmd->scmd.reply_buf = cmd->pdata; + cmd->scmd.reply_len = 0x10; + cmd->scmd.data_buf = (u8 *)(char *)&cmd->info; + cmd->scmd.status = 1; + cmd->stage = 0; + cmd->pdata[0] = 0xff; + cmd->retries = 20; + cmd->status = 1; + + /* Check transfer type, sanitize some "info" fields + * based on transfer type and do more checking + */ + cmd->info.caddr = cmd->info.devaddr; + cmd->read = cmd->info.devaddr & 0x01; + switch(cmd->info.type) { + case SMU_I2C_TRANSFER_SIMPLE: + memset(&cmd->info.sublen, 0, 4); + break; + case SMU_I2C_TRANSFER_COMBINED: + cmd->info.devaddr &= 0xfe; + case SMU_I2C_TRANSFER_STDSUB: + if (cmd->info.sublen > 3) + return -EINVAL; + break; + default: + return -EINVAL; + } + + /* Finish setting up command based on transfer direction + */ + if (cmd->read) { + if (cmd->info.datalen > SMU_I2C_READ_MAX) + return -EINVAL; + memset(cmd->info.data, 0xff, cmd->info.datalen); + cmd->scmd.data_len = 9; + } else { + if (cmd->info.datalen > SMU_I2C_WRITE_MAX) + return -EINVAL; + cmd->scmd.data_len = 9 + cmd->info.datalen; + } + + DPRINTK("SMU: i2c enqueuing command\n"); + DPRINTK("SMU: %s, len=%d bus=%x addr=%x sub0=%x type=%x\n", + cmd->read ? "read" : "write", cmd->info.datalen, + cmd->info.bus, cmd->info.caddr, + cmd->info.subaddr[0], cmd->info.type); + + + /* Enqueue command in i2c list, and if empty, enqueue also in + * main command list + */ + spin_lock_irqsave(&smu->lock, flags); + if (smu->cmd_i2c_cur == NULL) { + smu->cmd_i2c_cur = cmd; + list_add_tail(&cmd->scmd.link, &smu->cmd_list); + if (smu->cmd_cur == NULL) + smu_start_cmd(); + } else + list_add_tail(&cmd->link, &smu->cmd_i2c_list); + spin_unlock_irqrestore(&smu->lock, flags); + + return 0; +} + + + +/* + * Userland driver interface + */ + + +static LIST_HEAD(smu_clist); +static DEFINE_SPINLOCK(smu_clist_lock); + +enum smu_file_mode { + smu_file_commands, + smu_file_events, + smu_file_closing +}; + +struct smu_private +{ + struct list_head list; + enum smu_file_mode mode; + int busy; + struct smu_cmd cmd; + spinlock_t lock; + wait_queue_head_t wait; + u8 buffer[SMU_MAX_DATA]; +}; + + +static int smu_open(struct inode *inode, struct file *file) +{ + struct smu_private *pp; + unsigned long flags; + + pp = kmalloc(sizeof(struct smu_private), GFP_KERNEL); + if (pp == 0) + return -ENOMEM; + memset(pp, 0, sizeof(struct smu_private)); + spin_lock_init(&pp->lock); + pp->mode = smu_file_commands; + init_waitqueue_head(&pp->wait); + + spin_lock_irqsave(&smu_clist_lock, flags); + list_add(&pp->list, &smu_clist); + spin_unlock_irqrestore(&smu_clist_lock, flags); + file->private_data = pp; + + return 0; +} + + +static void smu_user_cmd_done(struct smu_cmd *cmd, void *misc) +{ + struct smu_private *pp = misc; + + wake_up_all(&pp->wait); +} + + +static ssize_t smu_write(struct file *file, const char __user *buf, + size_t count, loff_t *ppos) +{ + struct smu_private *pp = file->private_data; + unsigned long flags; + struct smu_user_cmd_hdr hdr; + int rc = 0; + + if (pp->busy) + return -EBUSY; + else if (copy_from_user(&hdr, buf, sizeof(hdr))) + return -EFAULT; + else if (hdr.cmdtype == SMU_CMDTYPE_WANTS_EVENTS) { + pp->mode = smu_file_events; + return 0; + } else if (hdr.cmdtype != SMU_CMDTYPE_SMU) + return -EINVAL; + else if (pp->mode != smu_file_commands) + return -EBADFD; + else if (hdr.data_len > SMU_MAX_DATA) + return -EINVAL; + + spin_lock_irqsave(&pp->lock, flags); + if (pp->busy) { + spin_unlock_irqrestore(&pp->lock, flags); + return -EBUSY; + } + pp->busy = 1; + pp->cmd.status = 1; + spin_unlock_irqrestore(&pp->lock, flags); + + if (copy_from_user(pp->buffer, buf + sizeof(hdr), hdr.data_len)) { + pp->busy = 0; + return -EFAULT; + } + + pp->cmd.cmd = hdr.cmd; + pp->cmd.data_len = hdr.data_len; + pp->cmd.reply_len = SMU_MAX_DATA; + pp->cmd.data_buf = pp->buffer; + pp->cmd.reply_buf = pp->buffer; + pp->cmd.done = smu_user_cmd_done; + pp->cmd.misc = pp; + rc = smu_queue_cmd(&pp->cmd); + if (rc < 0) + return rc; + return count; +} + + +static ssize_t smu_read_command(struct file *file, struct smu_private *pp, + char __user *buf, size_t count) +{ + DECLARE_WAITQUEUE(wait, current); + struct smu_user_reply_hdr hdr; + unsigned long flags; + int size, rc = 0; + + if (!pp->busy) + return 0; + if (count < sizeof(struct smu_user_reply_hdr)) + return -EOVERFLOW; + spin_lock_irqsave(&pp->lock, flags); + if (pp->cmd.status == 1) { + if (file->f_flags & O_NONBLOCK) + return -EAGAIN; + add_wait_queue(&pp->wait, &wait); + for (;;) { + set_current_state(TASK_INTERRUPTIBLE); + rc = 0; + if (pp->cmd.status != 1) + break; + rc = -ERESTARTSYS; + if (signal_pending(current)) + break; + spin_unlock_irqrestore(&pp->lock, flags); + schedule(); + spin_lock_irqsave(&pp->lock, flags); + } + set_current_state(TASK_RUNNING); + remove_wait_queue(&pp->wait, &wait); + } + spin_unlock_irqrestore(&pp->lock, flags); + if (rc) + return rc; + if (pp->cmd.status != 0) + pp->cmd.reply_len = 0; + size = sizeof(hdr) + pp->cmd.reply_len; + if (count < size) + size = count; + rc = size; + hdr.status = pp->cmd.status; + hdr.reply_len = pp->cmd.reply_len; + if (copy_to_user(buf, &hdr, sizeof(hdr))) + return -EFAULT; + size -= sizeof(hdr); + if (size && copy_to_user(buf + sizeof(hdr), pp->buffer, size)) + return -EFAULT; + pp->busy = 0; + + return rc; +} + + +static ssize_t smu_read_events(struct file *file, struct smu_private *pp, + char __user *buf, size_t count) +{ + /* Not implemented */ + msleep_interruptible(1000); + return 0; +} + + +static ssize_t smu_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos) +{ + struct smu_private *pp = file->private_data; + + if (pp->mode == smu_file_commands) + return smu_read_command(file, pp, buf, count); + if (pp->mode == smu_file_events) + return smu_read_events(file, pp, buf, count); + + return -EBADFD; +} + +static unsigned int smu_fpoll(struct file *file, poll_table *wait) +{ + struct smu_private *pp = file->private_data; + unsigned int mask = 0; + unsigned long flags; + + if (pp == 0) + return 0; + + if (pp->mode == smu_file_commands) { + poll_wait(file, &pp->wait, wait); + + spin_lock_irqsave(&pp->lock, flags); + if (pp->busy && pp->cmd.status != 1) + mask |= POLLIN; + spin_unlock_irqrestore(&pp->lock, flags); + } if (pp->mode == smu_file_events) { + /* Not yet implemented */ + } + return mask; +} + +static int smu_release(struct inode *inode, struct file *file) +{ + struct smu_private *pp = file->private_data; + unsigned long flags; + unsigned int busy; + + if (pp == 0) + return 0; + + file->private_data = NULL; + + /* Mark file as closing to avoid races with new request */ + spin_lock_irqsave(&pp->lock, flags); + pp->mode = smu_file_closing; + busy = pp->busy; + + /* Wait for any pending request to complete */ + if (busy && pp->cmd.status == 1) { + DECLARE_WAITQUEUE(wait, current); + + add_wait_queue(&pp->wait, &wait); + for (;;) { + set_current_state(TASK_UNINTERRUPTIBLE); + if (pp->cmd.status != 1) + break; + spin_lock_irqsave(&pp->lock, flags); + schedule(); + spin_unlock_irqrestore(&pp->lock, flags); + } + set_current_state(TASK_RUNNING); + remove_wait_queue(&pp->wait, &wait); + } + spin_unlock_irqrestore(&pp->lock, flags); + + spin_lock_irqsave(&smu_clist_lock, flags); + list_del(&pp->list); + spin_unlock_irqrestore(&smu_clist_lock, flags); + kfree(pp); + + return 0; +} + + +static struct file_operations smu_device_fops __pmacdata = { + .llseek = no_llseek, + .read = smu_read, + .write = smu_write, + .poll = smu_fpoll, + .open = smu_open, + .release = smu_release, +}; + +static struct miscdevice pmu_device __pmacdata = { + MISC_DYNAMIC_MINOR, "smu", &smu_device_fops +}; + +static int smu_device_init(void) +{ + if (!smu) + return -ENODEV; + if (misc_register(&pmu_device) < 0) + printk(KERN_ERR "via-pmu: cannot register misc device.\n"); + return 0; +} +device_initcall(smu_device_init); diff --git a/drivers/macintosh/therm_adt746x.c b/drivers/macintosh/therm_adt746x.c index c9ca111..f386966 100644 --- a/drivers/macintosh/therm_adt746x.c +++ b/drivers/macintosh/therm_adt746x.c @@ -599,7 +599,7 @@ thermostat_init(void) sensor_location[2] = "?"; } - of_dev = of_platform_device_create(np, "temperatures"); + of_dev = of_platform_device_create(np, "temperatures", NULL); if (of_dev == NULL) { printk(KERN_ERR "Can't register temperatures device !\n"); diff --git a/drivers/macintosh/therm_pm72.c b/drivers/macintosh/therm_pm72.c index 703e3197..cc507ce 100644 --- a/drivers/macintosh/therm_pm72.c +++ b/drivers/macintosh/therm_pm72.c @@ -2051,7 +2051,7 @@ static int __init therm_pm72_init(void) return -ENODEV; } } - of_dev = of_platform_device_create(np, "temperature"); + of_dev = of_platform_device_create(np, "temperature", NULL); if (of_dev == NULL) { printk(KERN_ERR "Can't register FCU platform device !\n"); return -ENODEV; diff --git a/drivers/macintosh/therm_windtunnel.c b/drivers/macintosh/therm_windtunnel.c index cbb72eb..6aaa1df 100644 --- a/drivers/macintosh/therm_windtunnel.c +++ b/drivers/macintosh/therm_windtunnel.c @@ -504,7 +504,7 @@ g4fan_init( void ) } if( !(np=of_find_node_by_name(NULL, "fan")) ) return -ENODEV; - x.of_dev = of_platform_device_create( np, "temperature" ); + x.of_dev = of_platform_device_create(np, "temperature", NULL); of_node_put( np ); if( !x.of_dev ) { -- cgit v1.1