From 04bedfa542d90ac7a1bbf28287e9861d0da21576 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Sun, 22 Mar 2009 10:46:42 +0000 Subject: [WATCHDOG] wdt.c: remove #ifdef CONFIG_WDT_501 Change the wdt.c watchdog driver so that the code is the same for both the WDT500 as the WDT501-P card. The selection of the card is now being done via the module parameter: 'type' instead of the config option CONFIG_WDT_501. Signed-off-by: Alan Cox Signed-off-by: Wim Van Sebroeck --- drivers/watchdog/Kconfig | 15 --------------- 1 file changed, 15 deletions(-) (limited to 'drivers/watchdog/Kconfig') diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 325c10f..55f64af 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -940,21 +940,6 @@ config WDT To compile this driver as a module, choose M here: the module will be called wdt. -config WDT_501 - bool "WDT501 features" - depends on WDT - help - Saying Y here and creating a character special file /dev/temperature - with major number 10 and minor number 131 ("man mknod") will give - you a thermometer inside your computer: reading from - /dev/temperature yields one byte, the temperature in degrees - Fahrenheit. This works only if you have a WDT501P watchdog board - installed. - - If you want to enable the Fan Tachometer on the WDT501P, then you - can do this via the tachometer parameter. Only do this if you have a - fan tachometer actually set up. - # # PCI-based Watchdog Cards # -- cgit v1.1