From f80b2581a7068907076ca92c43866f36f446c039 Mon Sep 17 00:00:00 2001 From: Alexander Shiyan Date: Thu, 8 May 2014 11:56:40 +0400 Subject: w1: mxc_w1: Optimize mxc_w1_ds2_touch_bit() According to the i.MX reference manual, the read/write bit operations takes from 60 us to 120 us. This patch optimizes mxc_w1_ds2_touch_bit() function to use proper value for such delay. Nevertheless, a small margin for the timeout has been added for the case if clock frequency is inaccurate. Signed-off-by: Alexander Shiyan Signed-off-by: Greg Kroah-Hartman --- drivers/w1/masters/mxc_w1.c | 27 +++++++++++++++------------ 1 file changed, 15 insertions(+), 12 deletions(-) (limited to 'drivers/w1') diff --git a/drivers/w1/masters/mxc_w1.c b/drivers/w1/masters/mxc_w1.c index 741d2bb4..da3d0f0 100644 --- a/drivers/w1/masters/mxc_w1.c +++ b/drivers/w1/masters/mxc_w1.c @@ -75,22 +75,25 @@ static u8 mxc_w1_ds2_reset_bus(void *data) */ static u8 mxc_w1_ds2_touch_bit(void *data, u8 bit) { - struct mxc_w1_device *mdev = data; - void __iomem *ctrl_addr = mdev->regs + MXC_W1_CONTROL; - unsigned int timeout_cnt = 400; /* Takes max. 120us according to - * datasheet. - */ + struct mxc_w1_device *dev = data; + unsigned long timeout; + + writeb(MXC_W1_CONTROL_WR(bit), dev->regs + MXC_W1_CONTROL); + + /* Wait for read/write bit (60us, Max 120us), use 200us for sure */ + timeout = jiffies + usecs_to_jiffies(200); - writeb(MXC_W1_CONTROL_WR(bit), ctrl_addr); + udelay(60); - while (timeout_cnt--) { - if (!(readb(ctrl_addr) & MXC_W1_CONTROL_WR(bit))) - break; + do { + u8 ctrl = readb(dev->regs + MXC_W1_CONTROL); - udelay(1); - } + /* RDST bit is valid after the WR1/RD bit is self-cleared */ + if (!(ctrl & MXC_W1_CONTROL_WR(bit))) + return !!(ctrl & MXC_W1_CONTROL_RDST); + } while (time_is_after_jiffies(timeout)); - return !!(readb(ctrl_addr) & MXC_W1_CONTROL_RDST); + return 0; } static int mxc_w1_probe(struct platform_device *pdev) -- cgit v1.1