From 8ef0e614b3ed2e2daf7e9cefd9a2f12652f824bc Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Tue, 31 May 2011 16:55:47 +0300 Subject: OMAP: DSS2: Reset LANEx_ULPS_SIG2 bits after use LANEx_ULPS_SIG2 bits are left on after entering ULPS. This doesn't cause any problems currently, as DSI HW is reset when it is enabled. However, if the reset is not done, operation fails if the bits are still set. So reset the bits after entering ULPS to ensure operation even without HW reset. Signed-off-by: Tomi Valkeinen --- drivers/video/omap2/dss/dsi.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/video/omap2/dss/dsi.c') diff --git a/drivers/video/omap2/dss/dsi.c b/drivers/video/omap2/dss/dsi.c index 69c2d4f..4496d09 100644 --- a/drivers/video/omap2/dss/dsi.c +++ b/drivers/video/omap2/dss/dsi.c @@ -3395,6 +3395,10 @@ static int dsi_enter_ulps(struct platform_device *dsidev) dsi_unregister_isr_cio(dsidev, dsi_completion_handler, &completion, DSI_CIO_IRQ_ULPSACTIVENOT_ALL0); + /* Reset LANEx_ULPS_SIG2 */ + REG_FLD_MOD(dsidev, DSI_COMPLEXIO_CFG2, (0 << 0) | (0 << 1) | (0 << 2), + 7, 5); + dsi_cio_power(dsidev, DSI_COMPLEXIO_POWER_ULPS); dsi_if_enable(dsidev, false); -- cgit v1.1