From c3492dbfa1050debf23a5b5cd2bc7514c5b37896 Mon Sep 17 00:00:00 2001 From: Mathias Nyman Date: Tue, 18 Nov 2014 11:27:11 +0200 Subject: USB: xhci: don't start a halted endpoint before its new dequeue is set A halted endpoint ring must first be reset, then move the ring dequeue pointer past the problematic TRB. If we start the ring too early after reset, but before moving the dequeue pointer we will end up executing the same problematic TRB again. As we always issue a set transfer dequeue command after a reset endpoint command we can skip starting endpoint rings at reset endpoint command completion. Without this fix we end up trying to handle the same faulty TD for contol endpoints. causing timeout, and failing testusb ctrl_out write tests. Fixes: e9df17e (USB: xhci: Correct assumptions about number of rings per endpoint.) Cc: #v2.6.35 Tested-by: Felipe Balbi Signed-off-by: Mathias Nyman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-ring.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index bc6fcbc..fbd0342 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1067,9 +1067,8 @@ static void xhci_handle_cmd_reset_ep(struct xhci_hcd *xhci, int slot_id, false); xhci_ring_cmd_db(xhci); } else { - /* Clear our internal halted state and restart the ring(s) */ + /* Clear our internal halted state */ xhci->devs[slot_id]->eps[ep_index].ep_state &= ~EP_HALTED; - ring_doorbell_for_active_rings(xhci, slot_id, ep_index); } } -- cgit v1.1