From 9a9b1d17ba59b78e4bae67f7a7cf546986a42e7d Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Tue, 6 Jan 2009 17:58:02 +0000 Subject: wusb: return -ENOTCONN when resetting a port with no connected device If reading the device descriptor fails during hub_port_init() fails, then the port is disabled, disconnecting the device. The port is then reset at the start of the next init attempt but there is no device to reset. Signed-off-by: David Vrabel --- drivers/usb/wusbcore/devconnect.c | 1 + drivers/usb/wusbcore/rh.c | 3 +++ 2 files changed, 4 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c index e2e7e4b..8e18141 100644 --- a/drivers/usb/wusbcore/devconnect.c +++ b/drivers/usb/wusbcore/devconnect.c @@ -386,6 +386,7 @@ static void __wusbhc_dev_disconnect(struct wusbhc *wusbhc, | USB_PORT_STAT_LOW_SPEED | USB_PORT_STAT_HIGH_SPEED); port->change |= USB_PORT_STAT_C_CONNECTION | USB_PORT_STAT_C_ENABLE; if (wusb_dev) { + dev_dbg(wusbhc->dev, "disconnecting device from port %d\n", wusb_dev->port_idx); if (!list_empty(&wusb_dev->cack_node)) list_del_init(&wusb_dev->cack_node); /* For the one in cack_add() */ diff --git a/drivers/usb/wusbcore/rh.c b/drivers/usb/wusbcore/rh.c index 95c6fa3..407a9fc 100644 --- a/drivers/usb/wusbcore/rh.c +++ b/drivers/usb/wusbcore/rh.c @@ -100,6 +100,9 @@ static int wusbhc_rh_port_reset(struct wusbhc *wusbhc, u8 port_idx) struct wusb_port *port = wusb_port_by_idx(wusbhc, port_idx); struct wusb_dev *wusb_dev = port->wusb_dev; + if (wusb_dev == NULL) + return -ENOTCONN; + port->status |= USB_PORT_STAT_RESET; port->change |= USB_PORT_STAT_C_RESET; -- cgit v1.1 From a5e6ced58d423cb09c4fc0087dcfdb0b5deb5e1c Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Wed, 7 Jan 2009 10:54:22 +0000 Subject: wusb: timeout when waiting for ASL/PZL updates in whci-hcd Timeout if an ASL or PZL update doesn't not complete and reset the hardware. Signed-off-by: David Vrabel --- drivers/usb/host/whci/asl.c | 9 +++++++-- drivers/usb/host/whci/hw.c | 15 +++++++++++++++ drivers/usb/host/whci/pzl.c | 9 +++++++-- drivers/usb/host/whci/whcd.h | 1 + 4 files changed, 30 insertions(+), 4 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/whci/asl.c b/drivers/usb/host/whci/asl.c index 577c0d2..2291c5f 100644 --- a/drivers/usb/host/whci/asl.c +++ b/drivers/usb/host/whci/asl.c @@ -170,12 +170,17 @@ void asl_stop(struct whc *whc) void asl_update(struct whc *whc, uint32_t wusbcmd) { struct wusbhc *wusbhc = &whc->wusbhc; + long t; mutex_lock(&wusbhc->mutex); if (wusbhc->active) { whc_write_wusbcmd(whc, wusbcmd, wusbcmd); - wait_event(whc->async_list_wq, - (le_readl(whc->base + WUSBCMD) & WUSBCMD_ASYNC_UPDATED) == 0); + t = wait_event_timeout( + whc->async_list_wq, + (le_readl(whc->base + WUSBCMD) & WUSBCMD_ASYNC_UPDATED) == 0, + msecs_to_jiffies(1000)); + if (t == 0) + whc_hw_error(whc, "ASL update timeout"); } mutex_unlock(&wusbhc->mutex); } diff --git a/drivers/usb/host/whci/hw.c b/drivers/usb/host/whci/hw.c index d498e72..6afa2e3 100644 --- a/drivers/usb/host/whci/hw.c +++ b/drivers/usb/host/whci/hw.c @@ -87,3 +87,18 @@ out: return ret; } + +/** + * whc_hw_error - recover from a hardware error + * @whc: the WHCI HC that broke. + * @reason: a description of the failure. + * + * Recover from broken hardware with a full reset. + */ +void whc_hw_error(struct whc *whc, const char *reason) +{ + struct wusbhc *wusbhc = &whc->wusbhc; + + dev_err(&whc->umc->dev, "hardware error: %s\n", reason); + wusbhc_reset_all(wusbhc); +} diff --git a/drivers/usb/host/whci/pzl.c b/drivers/usb/host/whci/pzl.c index 2ae5abf..7dc85a0 100644 --- a/drivers/usb/host/whci/pzl.c +++ b/drivers/usb/host/whci/pzl.c @@ -183,12 +183,17 @@ void pzl_stop(struct whc *whc) void pzl_update(struct whc *whc, uint32_t wusbcmd) { struct wusbhc *wusbhc = &whc->wusbhc; + long t; mutex_lock(&wusbhc->mutex); if (wusbhc->active) { whc_write_wusbcmd(whc, wusbcmd, wusbcmd); - wait_event(whc->periodic_list_wq, - (le_readl(whc->base + WUSBCMD) & WUSBCMD_PERIODIC_UPDATED) == 0); + t = wait_event_timeout( + whc->periodic_list_wq, + (le_readl(whc->base + WUSBCMD) & WUSBCMD_PERIODIC_UPDATED) == 0, + msecs_to_jiffies(1000)); + if (t == 0) + whc_hw_error(whc, "PZL update timeout"); } mutex_unlock(&wusbhc->mutex); } diff --git a/drivers/usb/host/whci/whcd.h b/drivers/usb/host/whci/whcd.h index 0f3540f..d3543a1 100644 --- a/drivers/usb/host/whci/whcd.h +++ b/drivers/usb/host/whci/whcd.h @@ -137,6 +137,7 @@ void whc_clean_up(struct whc *whc); /* hw.c */ void whc_write_wusbcmd(struct whc *whc, u32 mask, u32 val); int whc_do_gencmd(struct whc *whc, u32 cmd, u32 params, void *addr, size_t len); +void whc_hw_error(struct whc *whc, const char *reason); /* wusb.c */ int whc_wusbhc_start(struct wusbhc *wusbhc); -- cgit v1.1 From 183c6e0fb4e39c860960de4abd7541bd260491bb Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Mon, 12 Jan 2009 15:19:08 +0100 Subject: drivers/usb/gadget: Convert to snd_card_create() Convert from snd_card_new() to the new snd_card_create() function for gmidi. Signed-off-by: Takashi Iwai --- drivers/usb/gadget/gmidi.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c index 60d3f9e..14e09ab 100644 --- a/drivers/usb/gadget/gmidi.c +++ b/drivers/usb/gadget/gmidi.c @@ -1099,10 +1099,9 @@ static int gmidi_register_card(struct gmidi_device *dev) .dev_free = gmidi_snd_free, }; - card = snd_card_new(index, id, THIS_MODULE, 0); - if (!card) { - ERROR(dev, "snd_card_new failed\n"); - err = -ENOMEM; + err = snd_card_create(index, id, THIS_MODULE, 0, &card); + if (err < 0) { + ERROR(dev, "snd_card_create failed\n"); goto fail; } dev->card = card; -- cgit v1.1 From 953a7e8476bbd7367cebdb868c326ba42968bc13 Mon Sep 17 00:00:00 2001 From: Russell King Date: Sun, 18 Jan 2009 12:52:38 +0000 Subject: [ARM] omap: ensure OMAP drivers pass a struct device to clk_get() Signed-off-by: Russell King --- drivers/usb/host/ohci-omap.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index 4bbddb7..f3aaba3 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -315,14 +315,14 @@ static int usb_hcd_omap_probe (const struct hc_driver *driver, return -ENODEV; } - usb_host_ck = clk_get(0, "usb_hhc_ck"); + usb_host_ck = clk_get(&pdev->dev, "usb_hhc_ck"); if (IS_ERR(usb_host_ck)) return PTR_ERR(usb_host_ck); if (!cpu_is_omap15xx()) - usb_dc_ck = clk_get(0, "usb_dc_ck"); + usb_dc_ck = clk_get(&pdev->dev, "usb_dc_ck"); else - usb_dc_ck = clk_get(0, "lb_ck"); + usb_dc_ck = clk_get(&pdev->dev, "lb_ck"); if (IS_ERR(usb_dc_ck)) { clk_put(usb_host_ck); -- cgit v1.1 From 95bec45d2051227ef037f1080d7cef003b88d852 Mon Sep 17 00:00:00 2001 From: Wolfgang Glas Date: Thu, 15 Jan 2009 23:11:53 +0100 Subject: USB: cp2101: add fasttrax GPS evaluation kit vendor/product ID This adds the vendor/product ID of the fasttrax GPS evaluation kit from: http://www.fastraxgps.com/products/evaluationtools/evaluationkit/ to the cp2101 module since this device is actually equipped with a CP210x USB to serial bridge. The vendor/product ID is: 0x10c4/0x826b. Signed-off-by: Wolfgang Glas Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/cp2101.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index cfaf1f0..e97eb05 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -85,6 +85,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */ { USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */ { USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */ + { USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demostration module */ { USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */ { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */ { USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */ -- cgit v1.1 From ddeac4e75f2527a340f9dc655bde49bb2429b39b Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 15 Jan 2009 17:03:33 -0500 Subject: USB: fix toggle mismatch in disable_endpoint paths This patch (as1200) finishes some fixes that were left incomplete by an earlier patch. Although nobody has addressed this issue in the past, it turns out that we need to distinguish between two different modes of disabling and enabling endpoints. In one mode only the data structures in usbcore are affected, and in the other mode the host controller and device hardware states are affected as well. The earlier patch added an extra argument to the routines in the enable_endpoint pathways to reflect this difference. This patch adds corresponding arguments to the disable_endpoint pathways. Without this change, the endpoint toggle state can get out of sync between the host and the device. The exact mechanism depends on the details of the host controller (whether or not it stores its own copy of the toggle values). Signed-off-by: Alan Stern Reported-by: Dan Streetman Tested-by: Dan Streetman Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/driver.c | 2 +- drivers/usb/core/hub.c | 4 ++-- drivers/usb/core/message.c | 40 ++++++++++++++++++++++++---------------- drivers/usb/core/usb.h | 5 +++-- 4 files changed, 30 insertions(+), 21 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index 9876055..d0a21a5 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -284,7 +284,7 @@ static int usb_unbind_interface(struct device *dev) * supports "soft" unbinding. */ if (!driver->soft_unbind) - usb_disable_interface(udev, intf); + usb_disable_interface(udev, intf, false); driver->disconnect(intf); usb_cancel_queued_reset(intf); diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 94d5ee2..cd50d86 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2382,8 +2382,8 @@ static int hub_port_debounce(struct usb_hub *hub, int port1) void usb_ep0_reinit(struct usb_device *udev) { - usb_disable_endpoint(udev, 0 + USB_DIR_IN); - usb_disable_endpoint(udev, 0 + USB_DIR_OUT); + usb_disable_endpoint(udev, 0 + USB_DIR_IN, true); + usb_disable_endpoint(udev, 0 + USB_DIR_OUT, true); usb_enable_endpoint(udev, &udev->ep0, true); } EXPORT_SYMBOL_GPL(usb_ep0_reinit); diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index de51667..31fb204 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1039,14 +1039,15 @@ static void remove_intf_ep_devs(struct usb_interface *intf) * @dev: the device whose endpoint is being disabled * @epaddr: the endpoint's address. Endpoint number for output, * endpoint number + USB_DIR_IN for input + * @reset_hardware: flag to erase any endpoint state stored in the + * controller hardware * - * Deallocates hcd/hardware state for this endpoint ... and nukes all - * pending urbs. - * - * If the HCD hasn't registered a disable() function, this sets the - * endpoint's maxpacket size to 0 to prevent further submissions. + * Disables the endpoint for URB submission and nukes all pending URBs. + * If @reset_hardware is set then also deallocates hcd/hardware state + * for the endpoint. */ -void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr) +void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr, + bool reset_hardware) { unsigned int epnum = epaddr & USB_ENDPOINT_NUMBER_MASK; struct usb_host_endpoint *ep; @@ -1056,15 +1057,18 @@ void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr) if (usb_endpoint_out(epaddr)) { ep = dev->ep_out[epnum]; - dev->ep_out[epnum] = NULL; + if (reset_hardware) + dev->ep_out[epnum] = NULL; } else { ep = dev->ep_in[epnum]; - dev->ep_in[epnum] = NULL; + if (reset_hardware) + dev->ep_in[epnum] = NULL; } if (ep) { ep->enabled = 0; usb_hcd_flush_endpoint(dev, ep); - usb_hcd_disable_endpoint(dev, ep); + if (reset_hardware) + usb_hcd_disable_endpoint(dev, ep); } } @@ -1072,17 +1076,21 @@ void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr) * usb_disable_interface -- Disable all endpoints for an interface * @dev: the device whose interface is being disabled * @intf: pointer to the interface descriptor + * @reset_hardware: flag to erase any endpoint state stored in the + * controller hardware * * Disables all the endpoints for the interface's current altsetting. */ -void usb_disable_interface(struct usb_device *dev, struct usb_interface *intf) +void usb_disable_interface(struct usb_device *dev, struct usb_interface *intf, + bool reset_hardware) { struct usb_host_interface *alt = intf->cur_altsetting; int i; for (i = 0; i < alt->desc.bNumEndpoints; ++i) { usb_disable_endpoint(dev, - alt->endpoint[i].desc.bEndpointAddress); + alt->endpoint[i].desc.bEndpointAddress, + reset_hardware); } } @@ -1103,8 +1111,8 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0) dev_dbg(&dev->dev, "%s nuking %s URBs\n", __func__, skip_ep0 ? "non-ep0" : "all"); for (i = skip_ep0; i < 16; ++i) { - usb_disable_endpoint(dev, i); - usb_disable_endpoint(dev, i + USB_DIR_IN); + usb_disable_endpoint(dev, i, true); + usb_disable_endpoint(dev, i + USB_DIR_IN, true); } dev->toggle[0] = dev->toggle[1] = 0; @@ -1274,7 +1282,7 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate) remove_intf_ep_devs(iface); usb_remove_sysfs_intf_files(iface); } - usb_disable_interface(dev, iface); + usb_disable_interface(dev, iface, true); iface->cur_altsetting = alt; @@ -1353,8 +1361,8 @@ int usb_reset_configuration(struct usb_device *dev) */ for (i = 1; i < 16; ++i) { - usb_disable_endpoint(dev, i); - usb_disable_endpoint(dev, i + USB_DIR_IN); + usb_disable_endpoint(dev, i, true); + usb_disable_endpoint(dev, i + USB_DIR_IN, true); } config = dev->actconfig; diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index 3861778..9d0f33f 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -15,9 +15,10 @@ extern void usb_enable_endpoint(struct usb_device *dev, struct usb_host_endpoint *ep, bool reset_toggle); extern void usb_enable_interface(struct usb_device *dev, struct usb_interface *intf, bool reset_toggles); -extern void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr); +extern void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr, + bool reset_hardware); extern void usb_disable_interface(struct usb_device *dev, - struct usb_interface *intf); + struct usb_interface *intf, bool reset_hardware); extern void usb_release_interface_cache(struct kref *ref); extern void usb_disable_device(struct usb_device *dev, int skip_ep0); extern int usb_deauthorize_device(struct usb_device *); -- cgit v1.1 From b90de8aea36ae6fe8050a6e91b031369c4f251b2 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Wed, 14 Jan 2009 16:17:19 +0100 Subject: USB: storage: add unusual devs entry This adds an unusual devs entry for 2116:0320 Signed-off-by: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index a7f9513..ec40c26 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -2041,6 +2041,12 @@ UNUSUAL_DEV( 0x19d2, 0x2000, 0x0000, 0x0000, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_IGNORE_DEVICE), +UNUSUAL_DEV( 0x2116, 0x0320, 0x0001, 0x0001, + "ST", + "2A", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY), + /* patch submitted by Davide Perini * and Renato Perini */ -- cgit v1.1 From bcca06efea883bdf3803a0bb0ffa60f26730387d Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 13 Jan 2009 11:35:54 -0500 Subject: USB: don't enable wakeup by default for PCI host controllers This patch (as1199) changes the initial wakeup settings for PCI USB host controllers. The controllers are marked as capable of waking the system, but wakeup is not enabled by default. It turns out that enabling wakeup for USB host controllers has a lot of bad consequences. As the simplest example, if a USB mouse or keyboard is unplugged immediately after the computer is put to sleep, the unplug will cause the system to wake back up again! We are better off marking them as wakeup-capable and leaving wakeup disabled. Signed-off-by: Alan Stern Reported-by: Rafael J. Wysocki CC: David Brownell Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd-pci.c | 1 - drivers/usb/host/ehci-pci.c | 2 +- drivers/usb/host/ohci-hcd.c | 8 +++----- 3 files changed, 4 insertions(+), 7 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index 507741e..9943278 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -128,7 +128,6 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) } pci_set_master(dev); - device_set_wakeup_enable(&dev->dev, 1); retval = usb_add_hcd(hcd, dev->irq, IRQF_DISABLED | IRQF_SHARED); if (retval != 0) diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index bdc6e86..9faa5c8 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -230,7 +230,7 @@ static int ehci_pci_setup(struct usb_hcd *hcd) pci_read_config_word(pdev, 0x62, &port_wake); if (port_wake & 0x0001) { dev_warn(&pdev->dev, "Enabling legacy PCI PM\n"); - device_init_wakeup(&pdev->dev, 1); + device_set_wakeup_capable(&pdev->dev, 1); } } diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 65a9609..5cf5f1e 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -593,12 +593,10 @@ static int ohci_run (struct ohci_hcd *ohci) * to be checked in case boot firmware (BIOS/SMM/...) has set up * wakeup in a way the bus isn't aware of (e.g., legacy PCI PM). * If the bus glue detected wakeup capability then it should - * already be enabled. Either way, if wakeup should be enabled - * but isn't, we'll enable it now. + * already be enabled; if so we'll just enable it again. */ - if ((ohci->hc_control & OHCI_CTRL_RWC) != 0 - && !device_can_wakeup(hcd->self.controller)) - device_init_wakeup(hcd->self.controller, 1); + if ((ohci->hc_control & OHCI_CTRL_RWC) != 0) + device_set_wakeup_capable(hcd->self.controller, 1); switch (ohci->hc_control & OHCI_CTRL_HCFS) { case OHCI_USB_OPER: -- cgit v1.1 From a15d95a003fae154121733f049dd25e9c13dbef3 Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Tue, 20 Jan 2009 01:26:56 +0100 Subject: USB: Fix suspend-resume of PCI USB controllers Commit a0d4922da2e4ccb0973095d8d29f36f6b1b5f703 (USB: fix up suspend and resume for PCI host controllers) attempted to fix the suspend-resume of PCI USB controllers, but unfortunately it did that incorrectly and interrupts are left enabled by the USB controllers' ->suspend_late() callback as a result. This leads to serious problems during suspend which are very difficult to debug. Fix the issue by removing the ->suspend_late() callback of PCI USB controllers and moving the code from there to the ->suspend() callback executed with interrupts enabled. Additionally, make the ->resume() callback of PCI USB controllers execute pci_enable_wake(dev, PCI_D0, false) to disable wake-up from the full power state (PCI_D0). Signed-off-by: Rafael J. Wysocki Tested-by: Andrey Borzenkov Tested-by: "Jeff Chua" Cc: Alan Stern Cc: Andrew Morton Cc: Christian Borntraeger Cc: "Zdenek Kabelac" Cc: Ingo Molnar Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd-pci.c | 116 +++++++++++--------------------------------- drivers/usb/core/hcd.h | 1 - drivers/usb/host/ehci-pci.c | 1 - drivers/usb/host/ohci-pci.c | 1 - drivers/usb/host/uhci-hcd.c | 1 - 5 files changed, 27 insertions(+), 93 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index 9943278..c54fc40 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -200,6 +200,7 @@ int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t message) struct usb_hcd *hcd = pci_get_drvdata(dev); int retval = 0; int wake, w; + int has_pci_pm; /* Root hub suspend should have stopped all downstream traffic, * and all bus master traffic. And done so for both the interface @@ -229,6 +230,15 @@ int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t message) synchronize_irq(dev->irq); + /* Downstream ports from this root hub should already be quiesced, so + * there will be no DMA activity. Now we can shut down the upstream + * link (except maybe for PME# resume signaling) and enter some PCI + * low power state, if the hardware allows. + */ + pci_disable_device(dev); + + pci_save_state(dev); + /* Don't fail on error to enable wakeup. We rely on pci code * to reject requests the hardware can't implement, rather * than coding the same thing. @@ -240,35 +250,6 @@ int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t message) wake = w; dev_dbg(&dev->dev, "wakeup: %d\n", wake); - /* Downstream ports from this root hub should already be quiesced, so - * there will be no DMA activity. Now we can shut down the upstream - * link (except maybe for PME# resume signaling) and enter some PCI - * low power state, if the hardware allows. - */ - pci_disable_device(dev); - done: - return retval; -} -EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend); - -/** - * usb_hcd_pci_suspend_late - suspend a PCI-based HCD after IRQs are disabled - * @dev: USB Host Controller being suspended - * @message: Power Management message describing this state transition - * - * Store this function in the HCD's struct pci_driver as .suspend_late. - */ -int usb_hcd_pci_suspend_late(struct pci_dev *dev, pm_message_t message) -{ - int retval = 0; - int has_pci_pm; - - /* We might already be suspended (runtime PM -- not yet written) */ - if (dev->current_state != PCI_D0) - goto done; - - pci_save_state(dev); - /* Don't change state if we don't need to */ if (message.event == PM_EVENT_FREEZE || message.event == PM_EVENT_PRETHAW) { @@ -314,7 +295,7 @@ int usb_hcd_pci_suspend_late(struct pci_dev *dev, pm_message_t message) done: return retval; } -EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend_late); +EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend); /** * usb_hcd_pci_resume_early - resume a PCI-based HCD before IRQs are enabled @@ -324,65 +305,8 @@ EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend_late); */ int usb_hcd_pci_resume_early(struct pci_dev *dev) { - int retval = 0; - pci_power_t state = dev->current_state; - -#ifdef CONFIG_PPC_PMAC - /* Reenable ASIC clocks for USB */ - if (machine_is(powermac)) { - struct device_node *of_node; - - of_node = pci_device_to_OF_node(dev); - if (of_node) - pmac_call_feature(PMAC_FTR_USB_ENABLE, - of_node, 0, 1); - } -#endif - - /* NOTE: chip docs cover clean "real suspend" cases (what Linux - * calls "standby", "suspend to RAM", and so on). There are also - * dirty cases when swsusp fakes a suspend in "shutdown" mode. - */ - if (state != PCI_D0) { -#ifdef DEBUG - int pci_pm; - u16 pmcr; - - pci_pm = pci_find_capability(dev, PCI_CAP_ID_PM); - pci_read_config_word(dev, pci_pm + PCI_PM_CTRL, &pmcr); - pmcr &= PCI_PM_CTRL_STATE_MASK; - if (pmcr) { - /* Clean case: power to USB and to HC registers was - * maintained; remote wakeup is easy. - */ - dev_dbg(&dev->dev, "resume from PCI D%d\n", pmcr); - } else { - /* Clean: HC lost Vcc power, D0 uninitialized - * + Vaux may have preserved port and transceiver - * state ... for remote wakeup from D3cold - * + or not; HCD must reinit + re-enumerate - * - * Dirty: D0 semi-initialized cases with swsusp - * + after BIOS init - * + after Linux init (HCD statically linked) - */ - dev_dbg(&dev->dev, "resume from previous PCI D%d\n", - state); - } -#endif - - retval = pci_set_power_state(dev, PCI_D0); - } else { - /* Same basic cases: clean (powered/not), dirty */ - dev_dbg(&dev->dev, "PCI legacy resume\n"); - } - - if (retval < 0) - dev_err(&dev->dev, "can't resume: %d\n", retval); - else - pci_restore_state(dev); - - return retval; + pci_restore_state(dev); + return 0; } EXPORT_SYMBOL_GPL(usb_hcd_pci_resume_early); @@ -397,6 +321,18 @@ int usb_hcd_pci_resume(struct pci_dev *dev) struct usb_hcd *hcd; int retval; +#ifdef CONFIG_PPC_PMAC + /* Reenable ASIC clocks for USB */ + if (machine_is(powermac)) { + struct device_node *of_node; + + of_node = pci_device_to_OF_node(dev); + if (of_node) + pmac_call_feature(PMAC_FTR_USB_ENABLE, + of_node, 0, 1); + } +#endif + hcd = pci_get_drvdata(dev); if (hcd->state != HC_STATE_SUSPENDED) { dev_dbg(hcd->self.controller, @@ -404,6 +340,8 @@ int usb_hcd_pci_resume(struct pci_dev *dev) return 0; } + pci_enable_wake(dev, PCI_D0, false); + retval = pci_enable_device(dev); if (retval < 0) { dev_err(&dev->dev, "can't re-enable after resume, %d!\n", diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h index 572d2cf..5b94a56 100644 --- a/drivers/usb/core/hcd.h +++ b/drivers/usb/core/hcd.h @@ -257,7 +257,6 @@ extern void usb_hcd_pci_remove(struct pci_dev *dev); #ifdef CONFIG_PM extern int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t msg); -extern int usb_hcd_pci_suspend_late(struct pci_dev *dev, pm_message_t msg); extern int usb_hcd_pci_resume_early(struct pci_dev *dev); extern int usb_hcd_pci_resume(struct pci_dev *dev); #endif /* CONFIG_PM */ diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 9faa5c8..bb21fb0 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -432,7 +432,6 @@ static struct pci_driver ehci_pci_driver = { #ifdef CONFIG_PM .suspend = usb_hcd_pci_suspend, - .suspend_late = usb_hcd_pci_suspend_late, .resume_early = usb_hcd_pci_resume_early, .resume = usb_hcd_pci_resume, #endif diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index 8b28ae7..5d625c3 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -487,7 +487,6 @@ static struct pci_driver ohci_pci_driver = { #ifdef CONFIG_PM .suspend = usb_hcd_pci_suspend, - .suspend_late = usb_hcd_pci_suspend_late, .resume_early = usb_hcd_pci_resume_early, .resume = usb_hcd_pci_resume, #endif diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 4e22106..944f7e0 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -942,7 +942,6 @@ static struct pci_driver uhci_pci_driver = { #ifdef CONFIG_PM .suspend = usb_hcd_pci_suspend, - .suspend_late = usb_hcd_pci_suspend_late, .resume_early = usb_hcd_pci_resume_early, .resume = usb_hcd_pci_resume, #endif /* PM */ -- cgit v1.1 From 501950d846218ed80a776d2aae5aed9c8b92e778 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 13 Jan 2009 11:33:42 -0500 Subject: USB: fix char-device disconnect handling This patch (as1198) fixes a conceptual bug: Somewhere along the line we managed to confuse USB class devices with USB char devices. As a result, the code to send a disconnect signal to userspace would not be built if both CONFIG_USB_DEVICE_CLASS and CONFIG_USB_DEVICEFS were disabled. The usb_fs_classdev_common_remove() routine has been renamed to usbdev_remove() and it is now called whenever any USB device is removed, not just when a class device is unregistered. The notifier registration and unregistration calls are no longer conditionally compiled. And since the common removal code will always be called as part of the char device interface, there's no need to call it again as part of the usbfs interface; thus the invocation of usb_fs_classdev_common_remove() has been taken out of usbfs_remove_device(). Signed-off-by: Alan Stern Reported-by: Alon Bar-Lev Tested-by: Alon Bar-Lev Cc: stable --- drivers/usb/core/devio.c | 20 ++++++++++++-------- drivers/usb/core/inode.c | 1 - drivers/usb/core/usb.h | 1 - 3 files changed, 12 insertions(+), 10 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 26fece1..7513bb0 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -1700,7 +1700,7 @@ const struct file_operations usbdev_file_operations = { .release = usbdev_release, }; -void usb_fs_classdev_common_remove(struct usb_device *udev) +static void usbdev_remove(struct usb_device *udev) { struct dev_state *ps; struct siginfo sinfo; @@ -1742,10 +1742,15 @@ static void usb_classdev_remove(struct usb_device *dev) { if (dev->usb_classdev) device_unregister(dev->usb_classdev); - usb_fs_classdev_common_remove(dev); } -static int usb_classdev_notify(struct notifier_block *self, +#else +#define usb_classdev_add(dev) 0 +#define usb_classdev_remove(dev) do {} while (0) + +#endif + +static int usbdev_notify(struct notifier_block *self, unsigned long action, void *dev) { switch (action) { @@ -1755,15 +1760,15 @@ static int usb_classdev_notify(struct notifier_block *self, break; case USB_DEVICE_REMOVE: usb_classdev_remove(dev); + usbdev_remove(dev); break; } return NOTIFY_OK; } static struct notifier_block usbdev_nb = { - .notifier_call = usb_classdev_notify, + .notifier_call = usbdev_notify, }; -#endif static struct cdev usb_device_cdev; @@ -1798,9 +1803,8 @@ int __init usb_devio_init(void) * to /sys/dev */ usb_classdev_class->dev_kobj = NULL; - - usb_register_notify(&usbdev_nb); #endif + usb_register_notify(&usbdev_nb); out: return retval; @@ -1811,8 +1815,8 @@ error_cdev: void usb_devio_cleanup(void) { -#ifdef CONFIG_USB_DEVICE_CLASS usb_unregister_notify(&usbdev_nb); +#ifdef CONFIG_USB_DEVICE_CLASS class_destroy(usb_classdev_class); #endif cdev_del(&usb_device_cdev); diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c index 2a129cb..dff5760 100644 --- a/drivers/usb/core/inode.c +++ b/drivers/usb/core/inode.c @@ -717,7 +717,6 @@ static void usbfs_remove_device(struct usb_device *dev) fs_remove_file (dev->usbfs_dentry); dev->usbfs_dentry = NULL; } - usb_fs_classdev_common_remove(dev); } static int usbfs_notify(struct notifier_block *self, unsigned long action, void *dev) diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index 9d0f33f..79d8a9e 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -152,7 +152,6 @@ extern struct usb_driver usbfs_driver; extern const struct file_operations usbfs_devices_fops; extern const struct file_operations usbdev_file_operations; extern void usbfs_conn_disc_event(void); -extern void usb_fs_classdev_common_remove(struct usb_device *udev); extern int usb_devio_init(void); extern void usb_devio_cleanup(void); -- cgit v1.1 From 2bf5fa13fc8e34d7b86307b99f64a24cb7a83852 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Sat, 24 Jan 2009 17:55:57 -0800 Subject: USB: omap1 ohci buildfix (otg related) > > drivers/built-in.o: In function `ohci_omap_init': > > hid-quirks.c:(.text+0x6c608): undefined reference to `otg_get_transceiver' > > drivers/built-in.o: In function `omap_udc_probe': > > hid-quirks.c:(.init.text+0x34c0): undefined reference to `otg_get_transceiver' > > hid-quirks.c:(.init.text+0x3d40): undefined reference to `otg_put_transceiver' Reported-by: Russell King Signed-off-by: David Brownell Acked-by: Tony Lindgren Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/Kconfig | 1 + drivers/usb/otg/Kconfig | 4 ++-- 2 files changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 2b476b6..5a988f4 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -140,6 +140,7 @@ config USB_OHCI_HCD tristate "OHCI HCD support" depends on USB && USB_ARCH_HAS_OHCI select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 + select USB_OTG_UTILS if ARCH_OMAP ---help--- The Open Host Controller Interface (OHCI) is a standard for accessing USB 1.1 host controller hardware. It does more in hardware than Intel's diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig index 8e8dbdb..ee55b44 100644 --- a/drivers/usb/otg/Kconfig +++ b/drivers/usb/otg/Kconfig @@ -6,14 +6,14 @@ comment "OTG and related infrastructure" -if USB || USB_GADGET - config USB_OTG_UTILS bool help Select this to make sure the build includes objects from the OTG infrastructure directory. +if USB || USB_GADGET + # # USB Transceiver Drivers # -- cgit v1.1 From 10b4eadef140b09baf8b9ec1df37185e69773275 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Sat, 24 Jan 2009 17:56:17 -0800 Subject: USB: musb davinci buildfix Trying once more to get this merged. The original was submitted for 2.6.27-rc2 or so, and never got correctly merged. Neither were any of the numerous subsequent resends. Sigh. CC drivers/usb/musb/davinci.o drivers/usb/musb/davinci.c:35:32: error: mach/arch/hardware.h: No such file or directory drivers/usb/musb/davinci.c:36:30: error: mach/arch/memory.h: No such file or directory drivers/usb/musb/davinci.c:37:28: error: mach/arch/gpio.h: No such file or directory drivers/usb/musb/davinci.c:373: error: redefinition of 'musb_platform_set_mode' drivers/usb/musb/davinci.c:368: error: previous definition of 'musb_platform_set_mode' was here Signed-off-by: David Brownell Acked-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/davinci.c | 13 ++++--------- 1 file changed, 4 insertions(+), 9 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c index 0d566dc..5a8fd5d 100644 --- a/drivers/usb/musb/davinci.c +++ b/drivers/usb/musb/davinci.c @@ -32,9 +32,10 @@ #include #include -#include -#include -#include +#include +#include +#include + #include #include "musb_core.h" @@ -370,12 +371,6 @@ int musb_platform_set_mode(struct musb *musb, u8 mode) return -EIO; } -int musb_platform_set_mode(struct musb *musb, u8 mode) -{ - /* EVM can't do this (right?) */ - return -EIO; -} - int __init musb_platform_init(struct musb *musb) { void __iomem *tibase = musb->ctrl_base; -- cgit v1.1 From 37daa925cf0d4dfd2d1d9ca01e2e0d74fba3d64a Mon Sep 17 00:00:00 2001 From: David Brownell Date: Sat, 24 Jan 2009 17:56:25 -0800 Subject: USB: musb_hdrc: another davinci buildfix (otg related) The DaVinci code had an implementation of the OTG transceiver glue too; make it use the new-standard one. Signed-off-by: David Brownell Acked-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/usb') diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index 5af7379..e1d81d8 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -11,6 +11,7 @@ config USB_MUSB_HDRC depends on (USB || USB_GADGET) && HAVE_CLK depends on !SUPERH select TWL4030_USB if MACH_OMAP_3430SDP + select USB_OTG_UTILS tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)' help Say Y here if your system has a dual role high speed USB -- cgit v1.1 From 97a39896816489fe9a67c223e782e8dda06f25c9 Mon Sep 17 00:00:00 2001 From: Ajay Kumar Gupta Date: Sat, 24 Jan 2009 17:56:39 -0800 Subject: USB: musb free_irq bugfix Fixes insert module failure as free_irq() was not done in previous rmmod. Signed-off-by: Ajay Kumar Gupta Acked-by: Felipe Balbi Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_core.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 6c7faac..2cc34fa 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1824,8 +1824,9 @@ static void musb_free(struct musb *musb) musb_gadget_cleanup(musb); #endif - if (musb->nIrq >= 0 && musb->irq_wake) { - disable_irq_wake(musb->nIrq); + if (musb->nIrq >= 0) { + if (musb->irq_wake) + disable_irq_wake(musb->nIrq); free_irq(musb->nIrq, musb); } if (is_dma_capable() && musb->dma_controller) { -- cgit v1.1 From af7e0c5f126677fe8e6c4fbea37637b9c0c2fe2a Mon Sep 17 00:00:00 2001 From: Kalle Valo Date: Sat, 24 Jan 2009 17:57:15 -0800 Subject: USB: musb: tusb6010 buildfix drivers/usb/musb/tusb6010_omap.c:18:26: error: asm/arch/dma.h: No such file or directory drivers/usb/musb/tusb6010_omap.c:19:26: error: asm/arch/mux.h: No such file or directory Signed-off-by: Kalle Valo Acked-by: Felipe Balbi Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/tusb6010_omap.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c index 52f7f29..7e073a0 100644 --- a/drivers/usb/musb/tusb6010_omap.c +++ b/drivers/usb/musb/tusb6010_omap.c @@ -15,8 +15,8 @@ #include #include #include -#include -#include +#include +#include #include "musb_core.h" -- cgit v1.1 From 96bcd090fa434b4369e6e3a9cba937d1e513596d Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sat, 24 Jan 2009 17:57:24 -0800 Subject: USB: musb uses endpoint functions This set of patches introduces calls to the following set of functions: usb_endpoint_dir_in(epd) usb_endpoint_dir_out(epd) usb_endpoint_is_bulk_in(epd) usb_endpoint_is_bulk_out(epd) usb_endpoint_is_int_in(epd) usb_endpoint_is_int_out(epd) usb_endpoint_num(epd) usb_endpoint_type(epd) usb_endpoint_xfer_bulk(epd) usb_endpoint_xfer_control(epd) usb_endpoint_xfer_int(epd) usb_endpoint_xfer_isoc(epd) In some cases, introducing one of these functions is not possible, and it just replaces an explicit integer value by one of the following constants: USB_ENDPOINT_XFER_BULK USB_ENDPOINT_XFER_CONTROL USB_ENDPOINT_XFER_INT USB_ENDPOINT_XFER_ISOC An extract of the semantic patch that makes these changes is as follows: (http://www.emn.fr/x-info/coccinelle/) // @r1@ struct usb_endpoint_descriptor *epd; @@ - ((epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\)) == - \(USB_ENDPOINT_XFER_CONTROL\|0\)) + usb_endpoint_xfer_control(epd) @r5@ struct usb_endpoint_descriptor *epd; @@ - ((epd->bEndpointAddress & \(USB_ENDPOINT_DIR_MASK\|0x80\)) == - \(USB_DIR_IN\|0x80\)) + usb_endpoint_dir_in(epd) @inc@ @@ #include @depends on !inc && (r1||r5)@ @@ + #include #include // Signed-off-by: Julia Lawall Acked-by: Felipe Balbi Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_gadget.c | 6 +++--- drivers/usb/musb/musb_host.c | 4 ++-- 2 files changed, 5 insertions(+), 5 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 6197dae..4ea3053 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -874,10 +874,10 @@ static int musb_gadget_enable(struct usb_ep *ep, status = -EBUSY; goto fail; } - musb_ep->type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; + musb_ep->type = usb_endpoint_type(desc); /* check direction and (later) maxpacket size against endpoint */ - if ((desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) != epnum) + if (usb_endpoint_num(desc) != epnum) goto fail; /* REVISIT this rules out high bandwidth periodic transfers */ @@ -890,7 +890,7 @@ static int musb_gadget_enable(struct usb_ep *ep, * packet size (or fail), set the mode, clear the fifo */ musb_ep_select(mbase, epnum); - if (desc->bEndpointAddress & USB_DIR_IN) { + if (usb_endpoint_dir_in(desc)) { u16 int_txe = musb_readw(mbase, MUSB_INTRTXE); if (hw_ep->is_shared_fifo) diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 99fa612..a035cec 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -1847,8 +1847,8 @@ static int musb_urb_enqueue( goto done; } - qh->epnum = epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; - qh->type = epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; + qh->epnum = usb_endpoint_num(epd); + qh->type = usb_endpoint_type(epd); /* NOTE: urb->dev->devnum is wrong during SET_ADDRESS */ qh->addr_reg = (u8) usb_pipedevice(urb->pipe); -- cgit v1.1 From 704a14854aaf9758a1248ea36a7d1b8cc42a4b3e Mon Sep 17 00:00:00 2001 From: Hugo Villeneuve Date: Sat, 24 Jan 2009 17:57:30 -0800 Subject: USB: musb cppi bugfixes These compilation errors are related to incorrect debugging macro and variable names and generated the following errors: drivers/usb/musb/cppi_dma.c:437:5: warning: "MUSB_DEBUG" is not defined drivers/usb/musb/cppi_dma.c: In function 'cppi_next_rx_segment': drivers/usb/musb/cppi_dma.c:884: error: 'debug' undeclared (first use in this function) Signed-off-by: Hugo Villeneuve Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/cppi_dma.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c index 5ad6d08..d8d5345 100644 --- a/drivers/usb/musb/cppi_dma.c +++ b/drivers/usb/musb/cppi_dma.c @@ -9,6 +9,7 @@ #include #include "musb_core.h" +#include "musb_debug.h" #include "cppi_dma.h" @@ -423,6 +424,7 @@ cppi_rndis_update(struct cppi_channel *c, int is_rx, } } +#ifdef CONFIG_USB_MUSB_DEBUG static void cppi_dump_rxbd(const char *tag, struct cppi_descriptor *bd) { pr_debug("RXBD/%s %08x: " @@ -431,10 +433,11 @@ static void cppi_dump_rxbd(const char *tag, struct cppi_descriptor *bd) bd->hw_next, bd->hw_bufp, bd->hw_off_len, bd->hw_options); } +#endif static void cppi_dump_rxq(int level, const char *tag, struct cppi_channel *rx) { -#if MUSB_DEBUG > 0 +#ifdef CONFIG_USB_MUSB_DEBUG struct cppi_descriptor *bd; if (!_dbg_level(level)) @@ -881,12 +884,14 @@ cppi_next_rx_segment(struct musb *musb, struct cppi_channel *rx, int onepacket) bd->hw_options |= CPPI_SOP_SET; tail->hw_options |= CPPI_EOP_SET; - if (debug >= 5) { +#ifdef CONFIG_USB_MUSB_DEBUG + if (_dbg_level(5)) { struct cppi_descriptor *d; for (d = rx->head; d; d = d->next) cppi_dump_rxbd("S", d); } +#endif /* in case the preceding transfer left some state... */ tail = rx->last_processed; -- cgit v1.1 From 191b776616838f035c2fe7eecc882b5c1f134353 Mon Sep 17 00:00:00 2001 From: Swaminathan S Date: Sat, 24 Jan 2009 17:57:37 -0800 Subject: USB: musb cppi dma fix Initializes the actual_len field to 0 before every DMA transaction. Signed-off-by: Swaminathan S Acked-by: Felipe Balbi Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/cppi_dma.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/usb') diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c index d8d5345..569ef0f 100644 --- a/drivers/usb/musb/cppi_dma.c +++ b/drivers/usb/musb/cppi_dma.c @@ -995,6 +995,7 @@ static int cppi_channel_program(struct dma_channel *ch, cppi_ch->offset = 0; cppi_ch->maxpacket = maxpacket; cppi_ch->buf_len = len; + cppi_ch->channel.actual_len = 0; /* TX channel? or RX? */ if (cppi_ch->transmit) -- cgit v1.1 From cd67435ef985d0d6279803f2ae48b5248a7178df Mon Sep 17 00:00:00 2001 From: David Brownell Date: Mon, 26 Jan 2009 02:05:43 -0800 Subject: USB: musb: Kconfig fix The Blackfin MUSB Kconfig text didn't properly parenthesise its dependencies. This was visible in non-Blackfin configs by the way the user interfaces lost track of dependencies, when doing a bunch of test builds. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index e1d81d8..9985db0 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -50,7 +50,7 @@ comment "OMAP 343x high speed USB support" depends on USB_MUSB_HDRC && ARCH_OMAP34XX comment "Blackfin high speed USB Support" - depends on USB_MUSB_HDRC && (BF54x && !BF544) || (BF52x && !BF522 && !BF523) + depends on USB_MUSB_HDRC && ((BF54x && !BF544) || (BF52x && !BF522 && !BF523)) config USB_TUSB6010 boolean "TUSB 6010 support" -- cgit v1.1 From dd4dff8b035f6dda69ece98e20d4c2d76b9f97d1 Mon Sep 17 00:00:00 2001 From: Bryan Wu Date: Thu, 8 Jan 2009 00:21:18 +0800 Subject: USB: composite: Fix bug: should test set_alt function pointer before use it Signed-off-by: Bryan Wu Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/composite.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index f2da026..363951e 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -772,7 +772,7 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) f = cdev->config->interface[w_index]; if (!f) break; - if (w_value && !f->get_alt) + if (w_value && !f->set_alt) break; value = f->set_alt(f, w_index, w_value); break; -- cgit v1.1 From 08889517b3713926169d79d99782192e86acdc67 Mon Sep 17 00:00:00 2001 From: Bryan Wu Date: Thu, 8 Jan 2009 00:21:19 +0800 Subject: USB: composite: Fix bug: low byte of w_index is the usb interface number not the whole 2 bytes of w_index In some usb gadget driver, for example usb audio class device, the high byte of w_index is the entity id and low byte is the interface number. If we use the 2 bytes of w_index as the array number, we will get a wrong pointer or NULL pointer. This patch fixes this issue. Signed-off-by: Bryan Wu Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/composite.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index 363951e..5d11c29 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -683,6 +683,7 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) struct usb_request *req = cdev->req; int value = -EOPNOTSUPP; u16 w_index = le16_to_cpu(ctrl->wIndex); + u8 intf = w_index & 0xFF; u16 w_value = le16_to_cpu(ctrl->wValue); u16 w_length = le16_to_cpu(ctrl->wLength); struct usb_function *f = NULL; @@ -769,7 +770,7 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) goto unknown; if (!cdev->config || w_index >= MAX_CONFIG_INTERFACES) break; - f = cdev->config->interface[w_index]; + f = cdev->config->interface[intf]; if (!f) break; if (w_value && !f->set_alt) @@ -781,7 +782,7 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) goto unknown; if (!cdev->config || w_index >= MAX_CONFIG_INTERFACES) break; - f = cdev->config->interface[w_index]; + f = cdev->config->interface[intf]; if (!f) break; /* lots of interfaces only need altsetting zero... */ @@ -808,7 +809,7 @@ unknown: */ if ((ctrl->bRequestType & USB_RECIP_MASK) == USB_RECIP_INTERFACE) { - f = cdev->config->interface[w_index]; + f = cdev->config->interface[intf]; if (f && f->setup) value = f->setup(f, ctrl); else -- cgit v1.1 From 837d84249611e9462dea6181a7ea30aa64e67d6a Mon Sep 17 00:00:00 2001 From: "James A. Treacy" Date: Sat, 24 Jan 2009 23:37:43 -0500 Subject: USB: cdc-acm: support some gps data loggers Below is a patch which allows a number of GPS loggers to work under linux. It is known to support the i-Blue 747 (all models), i-Blue 757, Qstarz BT-Q1000, i.Trek Z1, Konet BGL-32, and the Holux M-241. From: James A. Treacy Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 00b47ea..5664b4a 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1349,6 +1349,9 @@ static struct usb_device_id acm_ids[] = { { USB_DEVICE(0x0e8d, 0x0003), /* FIREFLY, MediaTek Inc; andrey.arapov@gmail.com */ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ }, + { USB_DEVICE(0x0e8d, 0x3329), /* i-blue 747, Qstarz BT-Q1000, Holux M-241 */ + .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ + }, { USB_DEVICE(0x0482, 0x0203), /* KYOCERA AH-K3001V */ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ }, -- cgit v1.1 From 0f9c7b4a1cc24d6f05a848f0acf72dbff7c5d42d Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Tue, 23 Dec 2008 17:31:23 +0100 Subject: USB: CDC-ACM quirk for MTK GPS This patch adds a device quirk for a MediaTek Inc GPS chipset. The device implements USB CDC ACM, but is missing the union descriptor, so the ACM class driver fails to probe the device. I've tested this patch with an iBlue A+ GPS which uses this chipset and using kernel 2.6.28-rc9. Signed-off-by: Andrew Lunn, Acked-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 5664b4a..f2bfae7 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1352,6 +1352,9 @@ static struct usb_device_id acm_ids[] = { { USB_DEVICE(0x0e8d, 0x3329), /* i-blue 747, Qstarz BT-Q1000, Holux M-241 */ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ }, + { USB_DEVICE(0x0e8d, 0x3329), /* MediaTek Inc GPS */ + .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ + }, { USB_DEVICE(0x0482, 0x0203), /* KYOCERA AH-K3001V */ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ }, -- cgit v1.1 From 296361ec3abbba7621e9fff01a572ac0873da903 Mon Sep 17 00:00:00 2001 From: sware Date: Wed, 7 Jan 2009 15:35:55 -0800 Subject: USB: remove vernier labpro from ldusb Labpro device is in both ldusb and vstusb device tables. Should only be a vstusb device. Signed-off-by: stephen ware Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/ldusb.c | 2 -- 1 file changed, 2 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c index 189a9db..ad4fb15 100644 --- a/drivers/usb/misc/ldusb.c +++ b/drivers/usb/misc/ldusb.c @@ -57,7 +57,6 @@ #define USB_DEVICE_ID_LD_MACHINETEST 0x2040 /* USB Product ID of Machine Test System */ #define USB_VENDOR_ID_VERNIER 0x08f7 -#define USB_DEVICE_ID_VERNIER_LABPRO 0x0001 #define USB_DEVICE_ID_VERNIER_GOTEMP 0x0002 #define USB_DEVICE_ID_VERNIER_SKIP 0x0003 #define USB_DEVICE_ID_VERNIER_CYCLOPS 0x0004 @@ -85,7 +84,6 @@ static struct usb_device_id ld_usb_table [] = { { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_NETWORKANALYSER) }, { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POWERCONTROL) }, { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MACHINETEST) }, - { USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LABPRO) }, { USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP) }, { USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP) }, { USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_CYCLOPS) }, -- cgit v1.1 From 06a743bfc42660f27fde5f24d7471e1eb4c71218 Mon Sep 17 00:00:00 2001 From: Brandon Philips Date: Mon, 5 Jan 2009 08:30:39 -0800 Subject: USB: usblp.c: add USBLP_QUIRK_BIDIR to Brother HL-1440 My Brother HL-1440 would print one document before CUPS would stop printing with the error "Printer not connected; will retry in 30 seconds...". I traced this down to the CUPS usb backend getting an EIO out of usblp on the IOCNR_GET_DEVICE_ID IOCTL. Adding the USBLP_QUIRK_BIDIR fixes the problem but is it the right solution? output from strace /usr/lib/cups/backend/usb after printing a document (Note: SNDCTL_DSP_SYNC == IOCNR_GET_DEVICE_ID): before patch open("/dev/usb/lp0", O_RDWR|O_EXCL) = 3 ioctl(3, SNDCTL_DSP_SYNC, 0x7fff2478cef0) = -1 EIO (Input/output error) after patch open("/dev/usb/lp0", O_RDWR|O_EXCL) = 3 ioctl(3, SNDCTL_DSP_SYNC, 0x7fffb8d474c0) = 0 Possibly related bug: https://bugs.launchpad.net/ubuntu/+source/cupsys/+bug/35638 Signed-off-by: Brandon Philips Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/usblp.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/usb') diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c index b5775af..3f3ee13 100644 --- a/drivers/usb/class/usblp.c +++ b/drivers/usb/class/usblp.c @@ -226,6 +226,7 @@ static const struct quirk_printer_struct quirk_printers[] = { { 0x0409, 0xf0be, USBLP_QUIRK_BIDIR }, /* NEC Picty920 (HP OEM) */ { 0x0409, 0xf1be, USBLP_QUIRK_BIDIR }, /* NEC Picty800 (HP OEM) */ { 0x0482, 0x0010, USBLP_QUIRK_BIDIR }, /* Kyocera Mita FS 820, by zut */ + { 0x04f9, 0x000d, USBLP_QUIRK_BIDIR }, /* Brother Industries, Ltd HL-1440 Laser Printer */ { 0x04b8, 0x0202, USBLP_QUIRK_BAD_CLASS }, /* Seiko Epson Receipt Printer M129C */ { 0, 0 } }; -- cgit v1.1 From 877e262c4e251352771cc391760a12665b5b210b Mon Sep 17 00:00:00 2001 From: Tomasz K Date: Sun, 4 Jan 2009 12:47:11 +0100 Subject: USB: cp2101 device My girl use modem GSM (EDGE) Commanader 2 on iPlus Polsih provider, PLEASE add this vendor=0x10C4 and product=0x822B to USB serial driver cp2101.c From: Tomasz K Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/cp2101.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index e97eb05..027f4b7 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -85,6 +85,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */ { USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */ { USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */ + { USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */ { USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demostration module */ { USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */ { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */ -- cgit v1.1 From 45eeff848bdfac96dc77aa722dda7c6cee6184f4 Mon Sep 17 00:00:00 2001 From: Robie Basak Date: Mon, 12 Jan 2009 23:05:59 +0000 Subject: USB: ftdi_sio: added Alti-2 VID and Neptune 3 PID This patch adds the vendor and product ID for the Alti-2 Neptune 3 (http://www.alti-2.com) which uses the FTDI chip. Signed-off-by: Robie Basak Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 1 + drivers/usb/serial/ftdi_sio.h | 4 ++++ 2 files changed, 5 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index c70a8f6..a85946b 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -660,6 +660,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) }, { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DGQG_PID) }, { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) }, + { USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 373ee09..e430576 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -854,6 +854,10 @@ #define FTDI_DOMINTELL_DGQG_PID 0xEF50 /* Master */ #define FTDI_DOMINTELL_DUSB_PID 0xEF51 /* DUSB01 module */ +/* Alti-2 products http://www.alti-2.com */ +#define ALTI2_VID 0x1BC9 +#define ALTI2_N3_PID 0x6001 /* Neptune 3 */ + /* Commands */ #define FTDI_SIO_RESET 0 /* Reset the port */ #define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */ -- cgit v1.1 From ca80801bfb24f7a41fe4fade4d2cf7c73f0b2f09 Mon Sep 17 00:00:00 2001 From: Mhayk Whandson Date: Fri, 9 Jan 2009 06:48:16 -0400 Subject: USB: ftdi_sio driver support of bar code scanner from Diebold Added the product id of bcs(bar code scanner) from Diebold Procomp Brazil. Signed-off-by: Mhayk Whandson Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 1 + drivers/usb/serial/ftdi_sio.h | 5 +++++ 2 files changed, 6 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index a85946b..7559733 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -661,6 +661,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DGQG_PID) }, { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) }, { USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) }, + { USB_DEVICE(FTDI_VID, DIEBOLD_BCS_SE923_PID) }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index e430576..1b62eff 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -885,6 +885,11 @@ #define RATOC_PRODUCT_ID_USB60F 0xb020 /* + * DIEBOLD BCS SE923 + */ +#define DIEBOLD_BCS_SE923_PID 0xfb99 + +/* * BmRequestType: 1100 0000b * bRequest: FTDI_E2_READ * wValue: 0 -- cgit v1.1 From 7abce6bedc118eb39fe177c2c26be5d008505c14 Mon Sep 17 00:00:00 2001 From: Pete Zaitcev Date: Sat, 20 Dec 2008 12:56:08 -0700 Subject: USB: usbmon: Implement compat_ioctl Running a 32-bit usbmon(8) on 2.6.28-rc9 produces the following: ioctl32(usbmon:28563): Unknown cmd fd(3) cmd(400c9206){t:ffffff92;sz:12} arg(ffd3f458) on /dev/usbmon0 It happens because the compatibility mode was implemented for 2.6.18 and not updated for the fsops.compat_ioctl API. This patch relocates the pieces from under #ifdef CONFIG_COMPAT into compat_ioctl with no other changes except one new whitespace. Signed-off-by: Pete Zaitcev Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/mon/mon_bin.c | 105 +++++++++++++++++++++++++++++----------------- 1 file changed, 66 insertions(+), 39 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c index e06810a..4cf27c7 100644 --- a/drivers/usb/mon/mon_bin.c +++ b/drivers/usb/mon/mon_bin.c @@ -37,6 +37,7 @@ #define MON_IOCX_GET _IOW(MON_IOC_MAGIC, 6, struct mon_bin_get) #define MON_IOCX_MFETCH _IOWR(MON_IOC_MAGIC, 7, struct mon_bin_mfetch) #define MON_IOCH_MFLUSH _IO(MON_IOC_MAGIC, 8) + #ifdef CONFIG_COMPAT #define MON_IOCX_GET32 _IOW(MON_IOC_MAGIC, 6, struct mon_bin_get32) #define MON_IOCX_MFETCH32 _IOWR(MON_IOC_MAGIC, 7, struct mon_bin_mfetch32) @@ -921,21 +922,6 @@ static int mon_bin_ioctl(struct inode *inode, struct file *file, } break; -#ifdef CONFIG_COMPAT - case MON_IOCX_GET32: { - struct mon_bin_get32 getb; - - if (copy_from_user(&getb, (void __user *)arg, - sizeof(struct mon_bin_get32))) - return -EFAULT; - - ret = mon_bin_get_event(file, rp, - compat_ptr(getb.hdr32), compat_ptr(getb.data32), - getb.alloc32); - } - break; -#endif - case MON_IOCX_MFETCH: { struct mon_bin_mfetch mfetch; @@ -962,7 +948,57 @@ static int mon_bin_ioctl(struct inode *inode, struct file *file, } break; + case MON_IOCG_STATS: { + struct mon_bin_stats __user *sp; + unsigned int nevents; + unsigned int ndropped; + + spin_lock_irqsave(&rp->b_lock, flags); + ndropped = rp->cnt_lost; + rp->cnt_lost = 0; + spin_unlock_irqrestore(&rp->b_lock, flags); + nevents = mon_bin_queued(rp); + + sp = (struct mon_bin_stats __user *)arg; + if (put_user(rp->cnt_lost, &sp->dropped)) + return -EFAULT; + if (put_user(nevents, &sp->queued)) + return -EFAULT; + + } + break; + + default: + return -ENOTTY; + } + + return ret; +} + #ifdef CONFIG_COMPAT +static long mon_bin_compat_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) +{ + struct mon_reader_bin *rp = file->private_data; + int ret; + + switch (cmd) { + + case MON_IOCX_GET32: { + struct mon_bin_get32 getb; + + if (copy_from_user(&getb, (void __user *)arg, + sizeof(struct mon_bin_get32))) + return -EFAULT; + + ret = mon_bin_get_event(file, rp, + compat_ptr(getb.hdr32), compat_ptr(getb.data32), + getb.alloc32); + if (ret < 0) + return ret; + } + return 0; + case MON_IOCX_MFETCH32: { struct mon_bin_mfetch32 mfetch; @@ -986,37 +1022,25 @@ static int mon_bin_ioctl(struct inode *inode, struct file *file, return ret; if (put_user(ret, &uptr->nfetch32)) return -EFAULT; - ret = 0; } - break; -#endif - - case MON_IOCG_STATS: { - struct mon_bin_stats __user *sp; - unsigned int nevents; - unsigned int ndropped; - - spin_lock_irqsave(&rp->b_lock, flags); - ndropped = rp->cnt_lost; - rp->cnt_lost = 0; - spin_unlock_irqrestore(&rp->b_lock, flags); - nevents = mon_bin_queued(rp); + return 0; - sp = (struct mon_bin_stats __user *)arg; - if (put_user(rp->cnt_lost, &sp->dropped)) - return -EFAULT; - if (put_user(nevents, &sp->queued)) - return -EFAULT; + case MON_IOCG_STATS: + return mon_bin_ioctl(NULL, file, cmd, + (unsigned long) compat_ptr(arg)); - } - break; + case MON_IOCQ_URB_LEN: + case MON_IOCQ_RING_SIZE: + case MON_IOCT_RING_SIZE: + case MON_IOCH_MFLUSH: + return mon_bin_ioctl(NULL, file, cmd, arg); default: - return -ENOTTY; + ; } - - return ret; + return -ENOTTY; } +#endif /* CONFIG_COMPAT */ static unsigned int mon_bin_poll(struct file *file, struct poll_table_struct *wait) @@ -1094,6 +1118,9 @@ static const struct file_operations mon_fops_binary = { /* .write = mon_text_write, */ .poll = mon_bin_poll, .ioctl = mon_bin_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = mon_bin_compat_ioctl, +#endif .release = mon_bin_release, .mmap = mon_bin_mmap, }; -- cgit v1.1 From 649150926b01c57e45a0376cbc1d3aa98eabfde2 Mon Sep 17 00:00:00 2001 From: Jean-Baptiste Onofre Date: Sat, 20 Dec 2008 20:11:55 +0100 Subject: USB: storage: support of Dane-Elec MediaTouch USB device This adds another unusual_devs.h entry for a device that can't handle more than 64k reads/writes in a single command. Signed-off-by: Jean-Baptiste Onofre Signed-off-by: Phil Dibowitz Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index ec40c26..c6c4358 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -995,6 +995,16 @@ UNUSUAL_DEV( 0x071b, 0x3203, 0x0000, 0x0000, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64), +/* Reported by Jean-Baptiste Onofre + * Support the following product : + * "Dane-Elec MediaTouch" + */ +UNUSUAL_DEV( 0x071b, 0x32bb, 0x0000, 0x0000, + "RockChip", + "MTP", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64), + /* Reported by Massimiliano Ghilardi * This USB MP3/AVI player device fails and disconnects if more than 128 * sectors (64kB) are read/written in a single command, and may be present -- cgit v1.1 From d547f13472adc99721d6eb756085276a8a342366 Mon Sep 17 00:00:00 2001 From: Phil Dibowitz Date: Sun, 11 Jan 2009 18:46:20 +0100 Subject: USB: Remove ZTE modem from unusual_devices The ZTE modem entry causes usb-storage to ignore the device, but for some versions of the device, usb-storage mode is required to get to modem ode. For both kinds the tool: http://www.draisberghof.de/usb_modeswitch/ should work. Note that the various versions of the device have the same ProductId, VendorId, and bcdDevice number, so we cannot have the entry for some and not others. Signed-off-by: Phil Dibowitz Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 10 ---------- 1 file changed, 10 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index c6c4358..ba16c9e 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -2041,16 +2041,6 @@ UNUSUAL_DEV( 0x1652, 0x6600, 0x0201, 0x0201, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), -/* Reported by Mauro Andreolini - * This entry is needed to bypass the ZeroCD mechanism - * and to properly load as a modem device. - */ -UNUSUAL_DEV( 0x19d2, 0x2000, 0x0000, 0x0000, - "Onda ET502HS", - "USB MMC Storage", - US_SC_DEVICE, US_PR_DEVICE, NULL, - US_FL_IGNORE_DEVICE), - UNUSUAL_DEV( 0x2116, 0x0320, 0x0001, 0x0001, "ST", "2A", -- cgit v1.1 From 3b498a66a698c581535c0fcf1a8907f3fe9449cc Mon Sep 17 00:00:00 2001 From: Marcel Sebek Date: Sun, 28 Dec 2008 14:06:50 +0100 Subject: USB: 'option' driver - onda device MT503HS has wrong id While trying to make GSM modem Onda MT503HS working, I found a mismatch between device id in the driver code (0x0200) and id in the lsusb output (0x2000). This patch fixed it for me, but I don't know if the original device id was also correct and the new ID should be added instead of replacing the old one. Signed-off-by: Marcel Sebek Acked-by: Domenico Riccio Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 5ed1834..19f5f0c 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -224,7 +224,7 @@ static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *po #define ONDA_VENDOR_ID 0x19d2 #define ONDA_PRODUCT_MSA501HS 0x0001 #define ONDA_PRODUCT_ET502HS 0x0002 -#define ONDA_PRODUCT_MT503HS 0x0200 +#define ONDA_PRODUCT_MT503HS 0x2000 #define BANDRICH_VENDOR_ID 0x1A8D #define BANDRICH_PRODUCT_C100_1 0x1002 -- cgit v1.1 From c89c60e9d6b306fb6963030abb3bd07cc3de66b2 Mon Sep 17 00:00:00 2001 From: Alan Cox Date: Sun, 11 Jan 2009 19:53:10 +0000 Subject: USB: cdc-acm: Add another conexant modem to the quirks Another Conexant, another device with the same quirk Signed-off-by: Alan Cox Acked-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index f2bfae7..97ba4a9 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1376,6 +1376,9 @@ static struct usb_device_id acm_ids[] = { { USB_DEVICE(0x0572, 0x1321), /* Conexant USB MODEM CX93010 */ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ }, + { USB_DEVICE(0x0572, 0x1324), /* Conexant USB MODEM RD02-D400 */ + .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ + }, /* control interfaces with various AT-command sets */ { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, -- cgit v1.1 From 1a1fab513734b3a4fca1bee8229e5ff7e1cb873c Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Mon, 12 Jan 2009 13:31:16 +0100 Subject: USB: new id for ti_usb_3410_5052 driver This adds a new device id Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ti_usb_3410_5052.c | 3 +++ drivers/usb/serial/ti_usb_3410_5052.h | 2 ++ 2 files changed, 5 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 3cf41df..baf5911 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -184,6 +184,7 @@ static struct usb_device_id ti_id_table_3410[7+TI_EXTRA_VID_PID_COUNT+1] = { { USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_PRODUCT_ID) }, { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_PRODUCT_ID) }, { USB_DEVICE(MTS_VENDOR_ID, MTS_EDGE_PRODUCT_ID) }, + { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) }, }; static struct usb_device_id ti_id_table_5052[4+TI_EXTRA_VID_PID_COUNT+1] = { @@ -191,6 +192,7 @@ static struct usb_device_id ti_id_table_5052[4+TI_EXTRA_VID_PID_COUNT+1] = { { USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) }, + { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) }, }; static struct usb_device_id ti_id_table_combined[6+2*TI_EXTRA_VID_PID_COUNT+1] = { @@ -205,6 +207,7 @@ static struct usb_device_id ti_id_table_combined[6+2*TI_EXTRA_VID_PID_COUNT+1] = { USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) }, + { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) }, { } }; diff --git a/drivers/usb/serial/ti_usb_3410_5052.h b/drivers/usb/serial/ti_usb_3410_5052.h index 7e4752f..b7ea5db 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.h +++ b/drivers/usb/serial/ti_usb_3410_5052.h @@ -27,7 +27,9 @@ /* Vendor and product ids */ #define TI_VENDOR_ID 0x0451 +#define IBM_VENDOR_ID 0x04b3 #define TI_3410_PRODUCT_ID 0x3410 +#define IBM_4543_PRODUCT_ID 0x4543 #define TI_3410_EZ430_ID 0xF430 /* TI ez430 development tool */ #define TI_5052_BOOT_PRODUCT_ID 0x5052 /* no EEPROM, no firmware */ #define TI_5152_BOOT_PRODUCT_ID 0x5152 /* no EEPROM, no firmware */ -- cgit v1.1 From 0df2479232eeea20c924350a11788c724b8c218d Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Sat, 17 Jan 2009 16:52:17 +0100 Subject: USB: GADGET: fix !x & y ! has a higher precedence than & Signed-off-by: Roel Kluin Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/imx_udc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c index cde8fdf..77c5d0a 100644 --- a/drivers/usb/gadget/imx_udc.c +++ b/drivers/usb/gadget/imx_udc.c @@ -297,7 +297,7 @@ void imx_ep_stall(struct imx_ep_struct *imx_ep) for (i = 0; i < 100; i ++) { temp = __raw_readl(imx_usb->base + USB_EP_STAT(EP_NO(imx_ep))); - if (!temp & EPSTAT_STALL) + if (!(temp & EPSTAT_STALL)) break; udelay(20); } -- cgit v1.1 From a83775b1465ce80af5610cbe80216432212bc7ee Mon Sep 17 00:00:00 2001 From: Phil Dibowitz Date: Tue, 20 Jan 2009 23:48:36 +0100 Subject: USB: unusual_dev: usb-storage needs to ignore a device This patch adds an unusual_devs entry for a Sony Ericsson modem. Like many other modems, we have to ignore the storage device in order to access the modem. At this time usb_modeswitch does not work with this device. Reported-by: The Solutor . Signed-off-by: Phil Dibowitz Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index ba16c9e..b3353bf 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1599,6 +1599,13 @@ UNUSUAL_DEV( 0x0fce, 0xd008, 0x0000, 0x0000, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NO_WP_DETECT ), +/* Reported by The Solutor */ +UNUSUAL_DEV( 0x0fce, 0xd0e1, 0x0000, 0x0000, + "Sony Ericsson", + "MD400", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_DEVICE), + /* Reported by Jan Mate * and by Soeren Sonnenburg */ UNUSUAL_DEV( 0x0fce, 0xe030, 0x0000, 0x0000, -- cgit v1.1 From aa23c8d616c33578fb99aa6a0effd6705b5d0fa1 Mon Sep 17 00:00:00 2001 From: Phil Dibowitz Date: Tue, 20 Jan 2009 23:42:52 +0100 Subject: USB: storage: Add another unusual_dev for off-by-one bug Argosy has released another device with the off-by-one sector. This is a harddrive with an internal cardreader which is affected. Based on a patch written by Martijn Hijdra Signed-off-by: Phil Dibowitz Cc: Martijn Hijdra Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index b3353bf..69269f7 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1261,6 +1261,13 @@ UNUSUAL_DEV( 0x0840, 0x0084, 0x0001, 0x0001, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY), +/* Reported by Martijn Hijdra */ +UNUSUAL_DEV( 0x0840, 0x0085, 0x0001, 0x0001, + "Argosy", + "Storage", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY), + /* Entry and supporting patch by Theodore Kilgore . * Flag will support Bulk devices which use a standards-violating 32-byte * Command Block Wrapper. Here, the "DC2MEGA" cameras (several brands) with -- cgit v1.1 From fc91be2ad03e0d243418414a854665274d560ca2 Mon Sep 17 00:00:00 2001 From: "Alex.Cheng@quantatw.com" Date: Thu, 22 Jan 2009 16:01:57 +0800 Subject: USB: option: add QUANTA HSDPA Data Card device ids This patch adds the support for the QUANTA Q101 series HSDPA Data Card. With the vendor and product IDs are set properly, the data card can be detected and works fine. Signed-off-by: Alex Cheng Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 19f5f0c..6c89da9 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -158,6 +158,13 @@ static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *po #define HUAWEI_PRODUCT_E143E 0x143E #define HUAWEI_PRODUCT_E143F 0x143F +#define QUANTA_VENDOR_ID 0x0408 +#define QUANTA_PRODUCT_Q101 0xEA02 +#define QUANTA_PRODUCT_Q111 0xEA03 +#define QUANTA_PRODUCT_GLX 0xEA04 +#define QUANTA_PRODUCT_GKE 0xEA05 +#define QUANTA_PRODUCT_GLE 0xEA06 + #define NOVATELWIRELESS_VENDOR_ID 0x1410 /* YISO PRODUCTS */ @@ -298,6 +305,11 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_GT) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_EX) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_MODEM) }, + { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_Q101) }, + { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_Q111) }, + { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLX) }, + { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GKE) }, + { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLE) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220BIS, 0xff, 0xff, 0xff) }, -- cgit v1.1 From 236dd4d18f293e3c9798f35c08272196826a980d Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Sat, 10 Jan 2009 05:03:21 +0300 Subject: USB: Driver for Freescale QUICC Engine USB Host Controller This patch adds support for the FHCI USB controller, as found in the Freescale MPC836x and MPC832x processors. It can support Full or Low speed modes. Quite a lot the hardware is doing by itself (SOF generation, CRC generation and checking), though scheduling and retransmission is on software's shoulders. This controller does not integrate the root hub, so this driver also fakes one-port hub. External hub is required to support more than one device. Signed-off-by: Anton Vorontsov Signed-off-by: Greg Kroah-Hartman --- drivers/usb/Makefile | 1 + drivers/usb/host/Kconfig | 17 + drivers/usb/host/Makefile | 6 + drivers/usb/host/fhci-dbg.c | 139 +++++++ drivers/usb/host/fhci-hcd.c | 836 +++++++++++++++++++++++++++++++++++++++ drivers/usb/host/fhci-hub.c | 345 ++++++++++++++++ drivers/usb/host/fhci-mem.c | 113 ++++++ drivers/usb/host/fhci-q.c | 284 ++++++++++++++ drivers/usb/host/fhci-sched.c | 888 ++++++++++++++++++++++++++++++++++++++++++ drivers/usb/host/fhci-tds.c | 626 +++++++++++++++++++++++++++++ drivers/usb/host/fhci.h | 607 +++++++++++++++++++++++++++++ 11 files changed, 3862 insertions(+) create mode 100644 drivers/usb/host/fhci-dbg.c create mode 100644 drivers/usb/host/fhci-hcd.c create mode 100644 drivers/usb/host/fhci-hub.c create mode 100644 drivers/usb/host/fhci-mem.c create mode 100644 drivers/usb/host/fhci-q.c create mode 100644 drivers/usb/host/fhci-sched.c create mode 100644 drivers/usb/host/fhci-tds.c create mode 100644 drivers/usb/host/fhci.h (limited to 'drivers/usb') diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index 8b7c419..8bcde8c 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_USB_EHCI_HCD) += host/ obj-$(CONFIG_USB_ISP116X_HCD) += host/ obj-$(CONFIG_USB_OHCI_HCD) += host/ obj-$(CONFIG_USB_UHCI_HCD) += host/ +obj-$(CONFIG_USB_FHCI_HCD) += host/ obj-$(CONFIG_USB_SL811_HCD) += host/ obj-$(CONFIG_USB_U132_HCD) += host/ obj-$(CONFIG_USB_R8A66597_HCD) += host/ diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 5a988f4..2c63bfb 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -239,6 +239,23 @@ config USB_UHCI_HCD To compile this driver as a module, choose M here: the module will be called uhci-hcd. +config USB_FHCI_HCD + tristate "Freescale QE USB Host Controller support" + depends on USB && OF_GPIO && QE_GPIO && QUICC_ENGINE + select FSL_GTM + select QE_USB + help + This driver enables support for Freescale QE USB Host Controller + (as found on MPC8360 and MPC8323 processors), the driver supports + Full and Low Speed USB. + +config FHCI_DEBUG + bool "Freescale QE USB Host Controller debug support" + depends on USB_FHCI_HCD && DEBUG_FS + help + Say "y" to see some FHCI debug information and statistics + throught debugfs. + config USB_U132_HCD tristate "Elan U132 Adapter Host Controller" depends on USB && USB_FTDI_ELAN diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index e5f3f20..f163571 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -7,6 +7,11 @@ ifeq ($(CONFIG_USB_DEBUG),y) endif isp1760-objs := isp1760-hcd.o isp1760-if.o +fhci-objs := fhci-hcd.o fhci-hub.o fhci-q.o fhci-mem.o \ + fhci-tds.o fhci-sched.o +ifeq ($(CONFIG_FHCI_DEBUG),y) +fhci-objs += fhci-dbg.o +endif obj-$(CONFIG_USB_WHCI_HCD) += whci/ @@ -17,6 +22,7 @@ obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o obj-$(CONFIG_USB_UHCI_HCD) += uhci-hcd.o +obj-$(CONFIG_USB_FHCI_HCD) += fhci.o obj-$(CONFIG_USB_SL811_HCD) += sl811-hcd.o obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o diff --git a/drivers/usb/host/fhci-dbg.c b/drivers/usb/host/fhci-dbg.c new file mode 100644 index 0000000..34e14ed --- /dev/null +++ b/drivers/usb/host/fhci-dbg.c @@ -0,0 +1,139 @@ +/* + * Freescale QUICC Engine USB Host Controller Driver + * + * Copyright (c) Freescale Semicondutor, Inc. 2006. + * Shlomi Gridish + * Jerry Huang + * Copyright (c) Logic Product Development, Inc. 2007 + * Peter Barada + * Copyright (c) MontaVista Software, Inc. 2008. + * Anton Vorontsov + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include "../core/hcd.h" +#include "fhci.h" + +void fhci_dbg_isr(struct fhci_hcd *fhci, int usb_er) +{ + int i; + + if (usb_er == -1) { + fhci->usb_irq_stat[12]++; + return; + } + + for (i = 0; i < 12; ++i) { + if (usb_er & (1 << i)) + fhci->usb_irq_stat[i]++; + } +} + +static int fhci_dfs_regs_show(struct seq_file *s, void *v) +{ + struct fhci_hcd *fhci = s->private; + struct fhci_regs __iomem *regs = fhci->regs; + + seq_printf(s, + "mode: 0x%x\n" "addr: 0x%x\n" + "command: 0x%x\n" "ep0: 0x%x\n" + "event: 0x%x\n" "mask: 0x%x\n" + "status: 0x%x\n" "SOF timer: %d\n" + "frame number: %d\n" + "lines status: 0x%x\n", + in_8(®s->usb_mod), in_8(®s->usb_addr), + in_8(®s->usb_comm), in_be16(®s->usb_ep[0]), + in_be16(®s->usb_event), in_be16(®s->usb_mask), + in_8(®s->usb_status), in_be16(®s->usb_sof_tmr), + in_be16(®s->usb_frame_num), + fhci_ioports_check_bus_state(fhci)); + + return 0; +} + +static int fhci_dfs_irq_stat_show(struct seq_file *s, void *v) +{ + struct fhci_hcd *fhci = s->private; + int *usb_irq_stat = fhci->usb_irq_stat; + + seq_printf(s, + "RXB: %d\n" "TXB: %d\n" "BSY: %d\n" + "SOF: %d\n" "TXE0: %d\n" "TXE1: %d\n" + "TXE2: %d\n" "TXE3: %d\n" "IDLE: %d\n" + "RESET: %d\n" "SFT: %d\n" "MSF: %d\n" + "IDLE_ONLY: %d\n", + usb_irq_stat[0], usb_irq_stat[1], usb_irq_stat[2], + usb_irq_stat[3], usb_irq_stat[4], usb_irq_stat[5], + usb_irq_stat[6], usb_irq_stat[7], usb_irq_stat[8], + usb_irq_stat[9], usb_irq_stat[10], usb_irq_stat[11], + usb_irq_stat[12]); + + return 0; +} + +static int fhci_dfs_regs_open(struct inode *inode, struct file *file) +{ + return single_open(file, fhci_dfs_regs_show, inode->i_private); +} + +static int fhci_dfs_irq_stat_open(struct inode *inode, struct file *file) +{ + return single_open(file, fhci_dfs_irq_stat_show, inode->i_private); +} + +static const struct file_operations fhci_dfs_regs_fops = { + .open = fhci_dfs_regs_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static const struct file_operations fhci_dfs_irq_stat_fops = { + .open = fhci_dfs_irq_stat_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +void fhci_dfs_create(struct fhci_hcd *fhci) +{ + struct device *dev = fhci_to_hcd(fhci)->self.controller; + + fhci->dfs_root = debugfs_create_dir(dev->bus_id, NULL); + if (!fhci->dfs_root) { + WARN_ON(1); + return; + } + + fhci->dfs_regs = debugfs_create_file("regs", S_IFREG | S_IRUGO, + fhci->dfs_root, fhci, &fhci_dfs_regs_fops); + + fhci->dfs_irq_stat = debugfs_create_file("irq_stat", + S_IFREG | S_IRUGO, fhci->dfs_root, fhci, + &fhci_dfs_irq_stat_fops); + + WARN_ON(!fhci->dfs_regs || !fhci->dfs_irq_stat); +} + +void fhci_dfs_destroy(struct fhci_hcd *fhci) +{ + if (!fhci->dfs_root) + return; + + if (fhci->dfs_irq_stat) + debugfs_remove(fhci->dfs_irq_stat); + + if (fhci->dfs_regs) + debugfs_remove(fhci->dfs_regs); + + debugfs_remove(fhci->dfs_root); +} diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c new file mode 100644 index 0000000..ba622cc --- /dev/null +++ b/drivers/usb/host/fhci-hcd.c @@ -0,0 +1,836 @@ +/* + * Freescale QUICC Engine USB Host Controller Driver + * + * Copyright (c) Freescale Semicondutor, Inc. 2006. + * Shlomi Gridish + * Jerry Huang + * Copyright (c) Logic Product Development, Inc. 2007 + * Peter Barada + * Copyright (c) MontaVista Software, Inc. 2008. + * Anton Vorontsov + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "../core/hcd.h" +#include "fhci.h" + +void fhci_start_sof_timer(struct fhci_hcd *fhci) +{ + fhci_dbg(fhci, "-> %s\n", __func__); + + /* clear frame_n */ + out_be16(&fhci->pram->frame_num, 0); + + out_be16(&fhci->regs->usb_sof_tmr, 0); + setbits8(&fhci->regs->usb_mod, USB_MODE_SFTE); + + fhci_dbg(fhci, "<- %s\n", __func__); +} + +void fhci_stop_sof_timer(struct fhci_hcd *fhci) +{ + fhci_dbg(fhci, "-> %s\n", __func__); + + clrbits8(&fhci->regs->usb_mod, USB_MODE_SFTE); + gtm_stop_timer16(fhci->timer); + + fhci_dbg(fhci, "<- %s\n", __func__); +} + +u16 fhci_get_sof_timer_count(struct fhci_usb *usb) +{ + return be16_to_cpu(in_be16(&usb->fhci->regs->usb_sof_tmr) / 12); +} + +/* initialize the endpoint zero */ +static u32 endpoint_zero_init(struct fhci_usb *usb, + enum fhci_mem_alloc data_mem, + u32 ring_len) +{ + u32 rc; + + rc = fhci_create_ep(usb, data_mem, ring_len); + if (rc) + return rc; + + /* inilialize endpoint registers */ + fhci_init_ep_registers(usb, usb->ep0, data_mem); + + return 0; +} + +/* enable the USB interrupts */ +void fhci_usb_enable_interrupt(struct fhci_usb *usb) +{ + struct fhci_hcd *fhci = usb->fhci; + + if (usb->intr_nesting_cnt == 1) { + /* initialize the USB interrupt */ + enable_irq(fhci_to_hcd(fhci)->irq); + + /* initialize the event register and mask register */ + out_be16(&usb->fhci->regs->usb_event, 0xffff); + out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk); + + /* enable the timer interrupts */ + enable_irq(fhci->timer->irq); + } else if (usb->intr_nesting_cnt > 1) + fhci_info(fhci, "unbalanced USB interrupts nesting\n"); + usb->intr_nesting_cnt--; +} + +/* diable the usb interrupt */ +void fhci_usb_disable_interrupt(struct fhci_usb *usb) +{ + struct fhci_hcd *fhci = usb->fhci; + + if (usb->intr_nesting_cnt == 0) { + /* diable the timer interrupt */ + disable_irq_nosync(fhci->timer->irq); + + /* disable the usb interrupt */ + disable_irq_nosync(fhci_to_hcd(fhci)->irq); + out_be16(&usb->fhci->regs->usb_mask, 0); + } + usb->intr_nesting_cnt++; +} + +/* enable the USB controller */ +static u32 fhci_usb_enable(struct fhci_hcd *fhci) +{ + struct fhci_usb *usb = fhci->usb_lld; + + out_be16(&usb->fhci->regs->usb_event, 0xffff); + out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk); + setbits8(&usb->fhci->regs->usb_mod, USB_MODE_EN); + + mdelay(100); + + return 0; +} + +/* disable the USB controller */ +static u32 fhci_usb_disable(struct fhci_hcd *fhci) +{ + struct fhci_usb *usb = fhci->usb_lld; + + fhci_usb_disable_interrupt(usb); + fhci_port_disable(fhci); + + /* disable the usb controller */ + if (usb->port_status == FHCI_PORT_FULL || + usb->port_status == FHCI_PORT_LOW) + fhci_device_disconnected_interrupt(fhci); + + clrbits8(&usb->fhci->regs->usb_mod, USB_MODE_EN); + + return 0; +} + +/* check the bus state by polling the QE bit on the IO ports */ +int fhci_ioports_check_bus_state(struct fhci_hcd *fhci) +{ + u8 bits = 0; + + /* check USBOE,if transmitting,exit */ + if (!gpio_get_value(fhci->gpios[GPIO_USBOE])) + return -1; + + /* check USBRP */ + if (gpio_get_value(fhci->gpios[GPIO_USBRP])) + bits |= 0x2; + + /* check USBRN */ + if (gpio_get_value(fhci->gpios[GPIO_USBRN])) + bits |= 0x1; + + return bits; +} + +static void fhci_mem_free(struct fhci_hcd *fhci) +{ + struct ed *ed; + struct ed *next_ed; + struct td *td; + struct td *next_td; + + list_for_each_entry_safe(ed, next_ed, &fhci->empty_eds, node) { + list_del(&ed->node); + kfree(ed); + } + + list_for_each_entry_safe(td, next_td, &fhci->empty_tds, node) { + list_del(&td->node); + kfree(td); + } + + kfree(fhci->vroot_hub); + fhci->vroot_hub = NULL; + + kfree(fhci->hc_list); + fhci->hc_list = NULL; +} + +static int fhci_mem_init(struct fhci_hcd *fhci) +{ + int i; + + fhci->hc_list = kzalloc(sizeof(*fhci->hc_list), GFP_KERNEL); + if (!fhci->hc_list) + goto err; + + INIT_LIST_HEAD(&fhci->hc_list->ctrl_list); + INIT_LIST_HEAD(&fhci->hc_list->bulk_list); + INIT_LIST_HEAD(&fhci->hc_list->iso_list); + INIT_LIST_HEAD(&fhci->hc_list->intr_list); + INIT_LIST_HEAD(&fhci->hc_list->done_list); + + fhci->vroot_hub = kzalloc(sizeof(*fhci->vroot_hub), GFP_KERNEL); + if (!fhci->vroot_hub) + goto err; + + INIT_LIST_HEAD(&fhci->empty_eds); + INIT_LIST_HEAD(&fhci->empty_tds); + + /* initialize work queue to handle done list */ + fhci_tasklet.data = (unsigned long)fhci; + fhci->process_done_task = &fhci_tasklet; + + for (i = 0; i < MAX_TDS; i++) { + struct td *td; + + td = kmalloc(sizeof(*td), GFP_KERNEL); + if (!td) + goto err; + fhci_recycle_empty_td(fhci, td); + } + for (i = 0; i < MAX_EDS; i++) { + struct ed *ed; + + ed = kmalloc(sizeof(*ed), GFP_KERNEL); + if (!ed) + goto err; + fhci_recycle_empty_ed(fhci, ed); + } + + fhci->active_urbs = 0; + return 0; +err: + fhci_mem_free(fhci); + return -ENOMEM; +} + +/* destroy the fhci_usb structure */ +static void fhci_usb_free(void *lld) +{ + struct fhci_usb *usb = lld; + struct fhci_hcd *fhci = usb->fhci; + + if (usb) { + fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF); + fhci_ep0_free(usb); + kfree(usb->actual_frame); + kfree(usb); + } +} + +/* initialize the USB */ +static int fhci_usb_init(struct fhci_hcd *fhci) +{ + struct fhci_usb *usb = fhci->usb_lld; + + memset_io(usb->fhci->pram, 0, FHCI_PRAM_SIZE); + + usb->port_status = FHCI_PORT_DISABLED; + usb->max_frame_usage = FRAME_TIME_USAGE; + usb->sw_transaction_time = SW_FIX_TIME_BETWEEN_TRANSACTION; + + usb->actual_frame = kzalloc(sizeof(*usb->actual_frame), GFP_KERNEL); + if (!usb->actual_frame) { + fhci_usb_free(usb); + return -ENOMEM; + } + + INIT_LIST_HEAD(&usb->actual_frame->tds_list); + + /* initializing registers on chip, clear frame number */ + out_be16(&fhci->pram->frame_num, 0); + + /* clear rx state */ + out_be32(&fhci->pram->rx_state, 0); + + /* set mask register */ + usb->saved_msk = (USB_E_TXB_MASK | + USB_E_TXE1_MASK | + USB_E_IDLE_MASK | + USB_E_RESET_MASK | USB_E_SFT_MASK | USB_E_MSF_MASK); + + out_8(&usb->fhci->regs->usb_mod, USB_MODE_HOST | USB_MODE_EN); + + /* clearing the mask register */ + out_be16(&usb->fhci->regs->usb_mask, 0); + + /* initialing the event register */ + out_be16(&usb->fhci->regs->usb_event, 0xffff); + + if (endpoint_zero_init(usb, DEFAULT_DATA_MEM, DEFAULT_RING_LEN) != 0) { + fhci_usb_free(usb); + return -EINVAL; + } + + return 0; +} + +/* initialize the fhci_usb struct and the corresponding data staruct */ +static struct fhci_usb *fhci_create_lld(struct fhci_hcd *fhci) +{ + struct fhci_usb *usb; + + /* allocate memory for SCC data structure */ + usb = kzalloc(sizeof(*usb), GFP_KERNEL); + if (!usb) { + fhci_err(fhci, "no memory for SCC data struct\n"); + return NULL; + } + + usb->fhci = fhci; + usb->hc_list = fhci->hc_list; + usb->vroot_hub = fhci->vroot_hub; + + usb->transfer_confirm = fhci_transfer_confirm_callback; + + return usb; +} + +static int fhci_start(struct usb_hcd *hcd) +{ + int ret; + struct fhci_hcd *fhci = hcd_to_fhci(hcd); + + ret = fhci_mem_init(fhci); + if (ret) { + fhci_err(fhci, "failed to allocate memory\n"); + goto err; + } + + fhci->usb_lld = fhci_create_lld(fhci); + if (!fhci->usb_lld) { + fhci_err(fhci, "low level driver config failed\n"); + ret = -ENOMEM; + goto err; + } + + ret = fhci_usb_init(fhci); + if (ret) { + fhci_err(fhci, "low level driver initialize failed\n"); + goto err; + } + + spin_lock_init(&fhci->lock); + + /* connect the virtual root hub */ + fhci->vroot_hub->dev_num = 1; /* this field may be needed to fix */ + fhci->vroot_hub->hub.wHubStatus = 0; + fhci->vroot_hub->hub.wHubChange = 0; + fhci->vroot_hub->port.wPortStatus = 0; + fhci->vroot_hub->port.wPortChange = 0; + + hcd->state = HC_STATE_RUNNING; + + /* + * From here on, khubd concurrently accesses the root + * hub; drivers will be talking to enumerated devices. + * (On restart paths, khubd already knows about the root + * hub and could find work as soon as we wrote FLAG_CF.) + * + * Before this point the HC was idle/ready. After, khubd + * and device drivers may start it running. + */ + fhci_usb_enable(fhci); + return 0; +err: + fhci_mem_free(fhci); + return ret; +} + +static void fhci_stop(struct usb_hcd *hcd) +{ + struct fhci_hcd *fhci = hcd_to_fhci(hcd); + + fhci_usb_disable_interrupt(fhci->usb_lld); + fhci_usb_disable(fhci); + + fhci_usb_free(fhci->usb_lld); + fhci->usb_lld = NULL; + fhci_mem_free(fhci); +} + +static int fhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, + gfp_t mem_flags) +{ + struct fhci_hcd *fhci = hcd_to_fhci(hcd); + u32 pipe = urb->pipe; + int ret; + int i; + int size = 0; + struct urb_priv *urb_priv; + unsigned long flags; + + switch (usb_pipetype(pipe)) { + case PIPE_CONTROL: + /* 1 td fro setup,1 for ack */ + size = 2; + case PIPE_BULK: + /* one td for every 4096 bytes(can be upto 8k) */ + size += urb->transfer_buffer_length / 4096; + /* ...add for any remaining bytes... */ + if ((urb->transfer_buffer_length % 4096) != 0) + size++; + /* ..and maybe a zero length packet to wrap it up */ + if (size == 0) + size++; + else if ((urb->transfer_flags & URB_ZERO_PACKET) != 0 + && (urb->transfer_buffer_length + % usb_maxpacket(urb->dev, pipe, + usb_pipeout(pipe))) != 0) + size++; + break; + case PIPE_ISOCHRONOUS: + size = urb->number_of_packets; + if (size <= 0) + return -EINVAL; + for (i = 0; i < urb->number_of_packets; i++) { + urb->iso_frame_desc[i].actual_length = 0; + urb->iso_frame_desc[i].status = (u32) (-EXDEV); + } + break; + case PIPE_INTERRUPT: + size = 1; + } + + /* allocate the private part of the URB */ + urb_priv = kzalloc(sizeof(*urb_priv), mem_flags); + if (!urb_priv) + return -ENOMEM; + + /* allocate the private part of the URB */ + urb_priv->tds = kzalloc(size * sizeof(struct td), mem_flags); + if (!urb_priv->tds) { + kfree(urb_priv); + return -ENOMEM; + } + + spin_lock_irqsave(&fhci->lock, flags); + + ret = usb_hcd_link_urb_to_ep(hcd, urb); + if (ret) + goto err; + + /* fill the private part of the URB */ + urb_priv->num_of_tds = size; + + urb->status = -EINPROGRESS; + urb->actual_length = 0; + urb->error_count = 0; + urb->hcpriv = urb_priv; + + fhci_queue_urb(fhci, urb); +err: + if (ret) { + kfree(urb_priv->tds); + kfree(urb_priv); + } + spin_unlock_irqrestore(&fhci->lock, flags); + return ret; +} + +/* dequeue FHCI URB */ +static int fhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) +{ + struct fhci_hcd *fhci = hcd_to_fhci(hcd); + struct fhci_usb *usb = fhci->usb_lld; + int ret = -EINVAL; + unsigned long flags; + + if (!urb || !urb->dev || !urb->dev->bus) + goto out; + + spin_lock_irqsave(&fhci->lock, flags); + + ret = usb_hcd_check_unlink_urb(hcd, urb, status); + if (ret) + goto out2; + + if (usb->port_status != FHCI_PORT_DISABLED) { + struct urb_priv *urb_priv; + + /* + * flag the urb's data for deletion in some upcoming + * SF interrupt's delete list processing + */ + urb_priv = urb->hcpriv; + + if (!urb_priv || (urb_priv->state == URB_DEL)) + goto out2; + + urb_priv->state = URB_DEL; + + /* already pending? */ + urb_priv->ed->state = FHCI_ED_URB_DEL; + } else { + fhci_urb_complete_free(fhci, urb); + } + +out2: + spin_unlock_irqrestore(&fhci->lock, flags); +out: + return ret; +} + +static void fhci_endpoint_disable(struct usb_hcd *hcd, + struct usb_host_endpoint *ep) +{ + struct fhci_hcd *fhci; + struct ed *ed; + unsigned long flags; + + fhci = hcd_to_fhci(hcd); + spin_lock_irqsave(&fhci->lock, flags); + ed = ep->hcpriv; + if (ed) { + while (ed->td_head != NULL) { + struct td *td = fhci_remove_td_from_ed(ed); + fhci_urb_complete_free(fhci, td->urb); + } + fhci_recycle_empty_ed(fhci, ed); + ep->hcpriv = NULL; + } + spin_unlock_irqrestore(&fhci->lock, flags); +} + +static int fhci_get_frame_number(struct usb_hcd *hcd) +{ + struct fhci_hcd *fhci = hcd_to_fhci(hcd); + + return get_frame_num(fhci); +} + +static const struct hc_driver fhci_driver = { + .description = "fsl,usb-fhci", + .product_desc = "FHCI HOST Controller", + .hcd_priv_size = sizeof(struct fhci_hcd), + + /* generic hardware linkage */ + .irq = fhci_irq, + .flags = HCD_USB11 | HCD_MEMORY, + + /* basic lifecycle operation */ + .start = fhci_start, + .stop = fhci_stop, + + /* managing i/o requests and associated device resources */ + .urb_enqueue = fhci_urb_enqueue, + .urb_dequeue = fhci_urb_dequeue, + .endpoint_disable = fhci_endpoint_disable, + + /* scheduling support */ + .get_frame_number = fhci_get_frame_number, + + /* root hub support */ + .hub_status_data = fhci_hub_status_data, + .hub_control = fhci_hub_control, +}; + +static int __devinit of_fhci_probe(struct of_device *ofdev, + const struct of_device_id *ofid) +{ + struct device *dev = &ofdev->dev; + struct device_node *node = ofdev->node; + struct usb_hcd *hcd; + struct fhci_hcd *fhci; + struct resource usb_regs; + unsigned long pram_addr; + unsigned int usb_irq; + const char *sprop; + const u32 *iprop; + int size; + int ret; + int i; + int j; + + if (usb_disabled()) + return -ENODEV; + + sprop = of_get_property(node, "mode", NULL); + if (sprop && strcmp(sprop, "host")) + return -ENODEV; + + hcd = usb_create_hcd(&fhci_driver, dev, dev->bus_id); + if (!hcd) { + dev_err(dev, "could not create hcd\n"); + return -ENOMEM; + } + + fhci = hcd_to_fhci(hcd); + hcd->self.controller = dev; + dev_set_drvdata(dev, hcd); + + iprop = of_get_property(node, "hub-power-budget", &size); + if (iprop && size == sizeof(*iprop)) + hcd->power_budget = *iprop; + + /* FHCI registers. */ + ret = of_address_to_resource(node, 0, &usb_regs); + if (ret) { + dev_err(dev, "could not get regs\n"); + goto err_regs; + } + + hcd->regs = ioremap(usb_regs.start, usb_regs.end - usb_regs.start + 1); + if (!hcd->regs) { + dev_err(dev, "could not ioremap regs\n"); + ret = -ENOMEM; + goto err_regs; + } + fhci->regs = hcd->regs; + + /* Parameter RAM. */ + iprop = of_get_property(node, "reg", &size); + if (!iprop || size < sizeof(*iprop) * 4) { + dev_err(dev, "can't get pram offset\n"); + ret = -EINVAL; + goto err_pram; + } + + pram_addr = cpm_muram_alloc_fixed(iprop[2], FHCI_PRAM_SIZE); + if (IS_ERR_VALUE(pram_addr)) { + dev_err(dev, "failed to allocate usb pram\n"); + ret = -ENOMEM; + goto err_pram; + } + fhci->pram = cpm_muram_addr(pram_addr); + + /* GPIOs and pins */ + for (i = 0; i < NUM_GPIOS; i++) { + int gpio; + enum of_gpio_flags flags; + + gpio = of_get_gpio_flags(node, i, &flags); + fhci->gpios[i] = gpio; + fhci->alow_gpios[i] = flags & OF_GPIO_ACTIVE_LOW; + + if (!gpio_is_valid(gpio)) { + if (i < GPIO_SPEED) { + dev_err(dev, "incorrect GPIO%d: %d\n", + i, gpio); + goto err_gpios; + } else { + dev_info(dev, "assuming board doesn't have " + "%s gpio\n", i == GPIO_SPEED ? + "speed" : "power"); + continue; + } + } + + ret = gpio_request(gpio, dev->bus_id); + if (ret) { + dev_err(dev, "failed to request gpio %d", i); + goto err_gpios; + } + + if (i >= GPIO_SPEED) { + ret = gpio_direction_output(gpio, 0); + if (ret) { + dev_err(dev, "failed to set gpio %d as " + "an output\n", i); + i++; + goto err_gpios; + } + } + } + + for (j = 0; j < NUM_PINS; j++) { + fhci->pins[j] = qe_pin_request(ofdev->node, j); + if (IS_ERR(fhci->pins[j])) { + ret = PTR_ERR(fhci->pins[j]); + dev_err(dev, "can't get pin %d: %d\n", j, ret); + goto err_pins; + } + } + + /* Frame limit timer and its interrupt. */ + fhci->timer = gtm_get_timer16(); + if (IS_ERR(fhci->timer)) { + ret = PTR_ERR(fhci->timer); + dev_err(dev, "failed to request qe timer: %i", ret); + goto err_get_timer; + } + + ret = request_irq(fhci->timer->irq, fhci_frame_limit_timer_irq, + IRQF_DISABLED, "qe timer (usb)", hcd); + if (ret) { + dev_err(dev, "failed to request timer irq"); + goto err_timer_irq; + } + + /* USB Host interrupt. */ + usb_irq = irq_of_parse_and_map(node, 0); + if (usb_irq == NO_IRQ) { + dev_err(dev, "could not get usb irq\n"); + ret = -EINVAL; + goto err_usb_irq; + } + + /* Clocks. */ + sprop = of_get_property(node, "fsl,fullspeed-clock", NULL); + if (sprop) { + fhci->fullspeed_clk = qe_clock_source(sprop); + if (fhci->fullspeed_clk == QE_CLK_DUMMY) { + dev_err(dev, "wrong fullspeed-clock\n"); + ret = -EINVAL; + goto err_clocks; + } + } + + sprop = of_get_property(node, "fsl,lowspeed-clock", NULL); + if (sprop) { + fhci->lowspeed_clk = qe_clock_source(sprop); + if (fhci->lowspeed_clk == QE_CLK_DUMMY) { + dev_err(dev, "wrong lowspeed-clock\n"); + ret = -EINVAL; + goto err_clocks; + } + } + + if (fhci->fullspeed_clk == QE_CLK_NONE && + fhci->lowspeed_clk == QE_CLK_NONE) { + dev_err(dev, "no clocks specified\n"); + ret = -EINVAL; + goto err_clocks; + } + + dev_info(dev, "at 0x%p, irq %d\n", hcd->regs, usb_irq); + + fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF); + + /* Start with full-speed, if possible. */ + if (fhci->fullspeed_clk != QE_CLK_NONE) { + fhci_config_transceiver(fhci, FHCI_PORT_FULL); + qe_usb_clock_set(fhci->fullspeed_clk, USB_CLOCK); + } else { + fhci_config_transceiver(fhci, FHCI_PORT_LOW); + qe_usb_clock_set(fhci->lowspeed_clk, USB_CLOCK >> 3); + } + + /* Clear and disable any pending interrupts. */ + out_be16(&fhci->regs->usb_event, 0xffff); + out_be16(&fhci->regs->usb_mask, 0); + + ret = usb_add_hcd(hcd, usb_irq, IRQF_DISABLED); + if (ret < 0) + goto err_add_hcd; + + fhci_dfs_create(fhci); + + return 0; + +err_add_hcd: +err_clocks: + irq_dispose_mapping(usb_irq); +err_usb_irq: + free_irq(fhci->timer->irq, hcd); +err_timer_irq: + gtm_put_timer16(fhci->timer); +err_get_timer: +err_pins: + while (--j >= 0) + qe_pin_free(fhci->pins[j]); +err_gpios: + while (--i >= 0) { + if (gpio_is_valid(fhci->gpios[i])) + gpio_free(fhci->gpios[i]); + } + cpm_muram_free(pram_addr); +err_pram: + iounmap(hcd->regs); +err_regs: + usb_put_hcd(hcd); + return ret; +} + +static int __devexit fhci_remove(struct device *dev) +{ + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct fhci_hcd *fhci = hcd_to_fhci(hcd); + int i; + int j; + + usb_remove_hcd(hcd); + free_irq(fhci->timer->irq, hcd); + gtm_put_timer16(fhci->timer); + cpm_muram_free(cpm_muram_offset(fhci->pram)); + for (i = 0; i < NUM_GPIOS; i++) { + if (!gpio_is_valid(fhci->gpios[i])) + continue; + gpio_free(fhci->gpios[i]); + } + for (j = 0; j < NUM_PINS; j++) + qe_pin_free(fhci->pins[j]); + fhci_dfs_destroy(fhci); + usb_put_hcd(hcd); + return 0; +} + +static int __devexit of_fhci_remove(struct of_device *ofdev) +{ + return fhci_remove(&ofdev->dev); +} + +static struct of_device_id of_fhci_match[] = { + { .compatible = "fsl,mpc8323-qe-usb", }, + {}, +}; +MODULE_DEVICE_TABLE(of, of_fhci_match); + +static struct of_platform_driver of_fhci_driver = { + .name = "fsl,usb-fhci", + .match_table = of_fhci_match, + .probe = of_fhci_probe, + .remove = __devexit_p(of_fhci_remove), +}; + +static int __init fhci_module_init(void) +{ + return of_register_platform_driver(&of_fhci_driver); +} +module_init(fhci_module_init); + +static void __exit fhci_module_exit(void) +{ + of_unregister_platform_driver(&of_fhci_driver); +} +module_exit(fhci_module_exit); + +MODULE_DESCRIPTION("USB Freescale Host Controller Interface Driver"); +MODULE_AUTHOR("Shlomi Gridish , " + "Jerry Huang , " + "Anton Vorontsov "); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/host/fhci-hub.c b/drivers/usb/host/fhci-hub.c new file mode 100644 index 0000000..0cfaedc --- /dev/null +++ b/drivers/usb/host/fhci-hub.c @@ -0,0 +1,345 @@ +/* + * Freescale QUICC Engine USB Host Controller Driver + * + * Copyright (c) Freescale Semicondutor, Inc. 2006. + * Shlomi Gridish + * Jerry Huang + * Copyright (c) Logic Product Development, Inc. 2007 + * Peter Barada + * Copyright (c) MontaVista Software, Inc. 2008. + * Anton Vorontsov + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "../core/hcd.h" +#include "fhci.h" + +/* virtual root hub specific descriptor */ +static u8 root_hub_des[] = { + 0x09, /* blength */ + 0x29, /* bDescriptorType;hub-descriptor */ + 0x01, /* bNbrPorts */ + 0x00, /* wHubCharacteristics */ + 0x00, + 0x01, /* bPwrOn2pwrGood;2ms */ + 0x00, /* bHubContrCurrent;0mA */ + 0x00, /* DeviceRemoveable */ + 0xff, /* PortPwrCtrlMask */ +}; + +static void fhci_gpio_set_value(struct fhci_hcd *fhci, int gpio_nr, bool on) +{ + int gpio = fhci->gpios[gpio_nr]; + bool alow = fhci->alow_gpios[gpio_nr]; + + if (!gpio_is_valid(gpio)) + return; + + gpio_set_value(gpio, on ^ alow); + mdelay(5); +} + +void fhci_config_transceiver(struct fhci_hcd *fhci, + enum fhci_port_status status) +{ + fhci_dbg(fhci, "-> %s: %d\n", __func__, status); + + switch (status) { + case FHCI_PORT_POWER_OFF: + fhci_gpio_set_value(fhci, GPIO_POWER, false); + break; + case FHCI_PORT_DISABLED: + case FHCI_PORT_WAITING: + fhci_gpio_set_value(fhci, GPIO_POWER, true); + break; + case FHCI_PORT_LOW: + fhci_gpio_set_value(fhci, GPIO_SPEED, false); + break; + case FHCI_PORT_FULL: + fhci_gpio_set_value(fhci, GPIO_SPEED, true); + break; + default: + WARN_ON(1); + break; + } + + fhci_dbg(fhci, "<- %s: %d\n", __func__, status); +} + +/* disable the USB port by clearing the EN bit in the USBMOD register */ +void fhci_port_disable(struct fhci_hcd *fhci) +{ + struct fhci_usb *usb = (struct fhci_usb *)fhci->usb_lld; + enum fhci_port_status port_status; + + fhci_dbg(fhci, "-> %s\n", __func__); + + fhci_stop_sof_timer(fhci); + + fhci_flush_all_transmissions(usb); + + fhci_usb_disable_interrupt((struct fhci_usb *)fhci->usb_lld); + port_status = usb->port_status; + usb->port_status = FHCI_PORT_DISABLED; + + /* Enable IDLE since we want to know if something comes along */ + usb->saved_msk |= USB_E_IDLE_MASK; + out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk); + + /* check if during the disconnection process attached new device */ + if (port_status == FHCI_PORT_WAITING) + fhci_device_connected_interrupt(fhci); + usb->vroot_hub->port.wPortStatus &= ~USB_PORT_STAT_ENABLE; + usb->vroot_hub->port.wPortChange |= USB_PORT_STAT_C_ENABLE; + fhci_usb_enable_interrupt((struct fhci_usb *)fhci->usb_lld); + + fhci_dbg(fhci, "<- %s\n", __func__); +} + +/* enable the USB port by setting the EN bit in the USBMOD register */ +void fhci_port_enable(void *lld) +{ + struct fhci_usb *usb = (struct fhci_usb *)lld; + struct fhci_hcd *fhci = usb->fhci; + + fhci_dbg(fhci, "-> %s\n", __func__); + + fhci_config_transceiver(fhci, usb->port_status); + + if ((usb->port_status != FHCI_PORT_FULL) && + (usb->port_status != FHCI_PORT_LOW)) + fhci_start_sof_timer(fhci); + + usb->vroot_hub->port.wPortStatus |= USB_PORT_STAT_ENABLE; + usb->vroot_hub->port.wPortChange |= USB_PORT_STAT_C_ENABLE; + + fhci_dbg(fhci, "<- %s\n", __func__); +} + +void fhci_io_port_generate_reset(struct fhci_hcd *fhci) +{ + fhci_dbg(fhci, "-> %s\n", __func__); + + gpio_direction_output(fhci->gpios[GPIO_USBOE], 0); + gpio_direction_output(fhci->gpios[GPIO_USBTP], 0); + gpio_direction_output(fhci->gpios[GPIO_USBTN], 0); + + mdelay(5); + + qe_pin_set_dedicated(fhci->pins[PIN_USBOE]); + qe_pin_set_dedicated(fhci->pins[PIN_USBTP]); + qe_pin_set_dedicated(fhci->pins[PIN_USBTN]); + + fhci_dbg(fhci, "<- %s\n", __func__); +} + +/* generate the RESET condition on the bus */ +void fhci_port_reset(void *lld) +{ + struct fhci_usb *usb = (struct fhci_usb *)lld; + struct fhci_hcd *fhci = usb->fhci; + u8 mode; + u16 mask; + + fhci_dbg(fhci, "-> %s\n", __func__); + + fhci_stop_sof_timer(fhci); + /* disable the USB controller */ + mode = in_8(&fhci->regs->usb_mod); + out_8(&fhci->regs->usb_mod, mode & (~USB_MODE_EN)); + + /* disable idle interrupts */ + mask = in_be16(&fhci->regs->usb_mask); + out_be16(&fhci->regs->usb_mask, mask & (~USB_E_IDLE_MASK)); + + fhci_io_port_generate_reset(fhci); + + /* enable interrupt on this endpoint */ + out_be16(&fhci->regs->usb_mask, mask); + + /* enable the USB controller */ + mode = in_8(&fhci->regs->usb_mod); + out_8(&fhci->regs->usb_mod, mode | USB_MODE_EN); + fhci_start_sof_timer(fhci); + + fhci_dbg(fhci, "<- %s\n", __func__); +} + +int fhci_hub_status_data(struct usb_hcd *hcd, char *buf) +{ + struct fhci_hcd *fhci = hcd_to_fhci(hcd); + int ret = 0; + unsigned long flags; + + fhci_dbg(fhci, "-> %s\n", __func__); + + spin_lock_irqsave(&fhci->lock, flags); + + if (fhci->vroot_hub->port.wPortChange & (USB_PORT_STAT_C_CONNECTION | + USB_PORT_STAT_C_ENABLE | USB_PORT_STAT_C_SUSPEND | + USB_PORT_STAT_C_RESET | USB_PORT_STAT_C_OVERCURRENT)) { + *buf = 1 << 1; + ret = 1; + fhci_dbg(fhci, "-- %s\n", __func__); + } + + spin_unlock_irqrestore(&fhci->lock, flags); + + fhci_dbg(fhci, "<- %s\n", __func__); + + return ret; +} + +int fhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, + u16 wIndex, char *buf, u16 wLength) +{ + struct fhci_hcd *fhci = hcd_to_fhci(hcd); + int retval = 0; + int len = 0; + struct usb_hub_status *hub_status; + struct usb_port_status *port_status; + unsigned long flags; + + spin_lock_irqsave(&fhci->lock, flags); + + fhci_dbg(fhci, "-> %s\n", __func__); + + switch (typeReq) { + case ClearHubFeature: + switch (wValue) { + case C_HUB_LOCAL_POWER: + case C_HUB_OVER_CURRENT: + break; + default: + goto error; + } + break; + case ClearPortFeature: + fhci->vroot_hub->feature &= (1 << wValue); + + switch (wValue) { + case USB_PORT_FEAT_ENABLE: + fhci->vroot_hub->port.wPortStatus &= + ~USB_PORT_STAT_ENABLE; + fhci_port_disable(fhci); + break; + case USB_PORT_FEAT_C_ENABLE: + fhci->vroot_hub->port.wPortChange &= + ~USB_PORT_STAT_C_ENABLE; + break; + case USB_PORT_FEAT_SUSPEND: + fhci->vroot_hub->port.wPortStatus &= + ~USB_PORT_STAT_SUSPEND; + fhci_stop_sof_timer(fhci); + break; + case USB_PORT_FEAT_C_SUSPEND: + fhci->vroot_hub->port.wPortChange &= + ~USB_PORT_STAT_C_SUSPEND; + break; + case USB_PORT_FEAT_POWER: + fhci->vroot_hub->port.wPortStatus &= + ~USB_PORT_STAT_POWER; + fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF); + break; + case USB_PORT_FEAT_C_CONNECTION: + fhci->vroot_hub->port.wPortChange &= + ~USB_PORT_STAT_C_CONNECTION; + break; + case USB_PORT_FEAT_C_OVER_CURRENT: + fhci->vroot_hub->port.wPortChange &= + ~USB_PORT_STAT_C_OVERCURRENT; + break; + case USB_PORT_FEAT_C_RESET: + fhci->vroot_hub->port.wPortChange &= + ~USB_PORT_STAT_C_RESET; + break; + default: + goto error; + } + break; + case GetHubDescriptor: + memcpy(buf, root_hub_des, sizeof(root_hub_des)); + buf[3] = 0x11; /* per-port power, no ovrcrnt */ + len = (buf[0] < wLength) ? buf[0] : wLength; + break; + case GetHubStatus: + hub_status = (struct usb_hub_status *)buf; + hub_status->wHubStatus = + cpu_to_le16(fhci->vroot_hub->hub.wHubStatus); + hub_status->wHubChange = + cpu_to_le16(fhci->vroot_hub->hub.wHubChange); + len = 4; + break; + case GetPortStatus: + port_status = (struct usb_port_status *)buf; + port_status->wPortStatus = + cpu_to_le16(fhci->vroot_hub->port.wPortStatus); + port_status->wPortChange = + cpu_to_le16(fhci->vroot_hub->port.wPortChange); + len = 4; + break; + case SetHubFeature: + switch (wValue) { + case C_HUB_OVER_CURRENT: + case C_HUB_LOCAL_POWER: + break; + default: + goto error; + } + break; + case SetPortFeature: + fhci->vroot_hub->feature |= (1 << wValue); + + switch (wValue) { + case USB_PORT_FEAT_ENABLE: + fhci->vroot_hub->port.wPortStatus |= + USB_PORT_STAT_ENABLE; + fhci_port_enable(fhci->usb_lld); + break; + case USB_PORT_FEAT_SUSPEND: + fhci->vroot_hub->port.wPortStatus |= + USB_PORT_STAT_SUSPEND; + fhci_stop_sof_timer(fhci); + break; + case USB_PORT_FEAT_RESET: + fhci->vroot_hub->port.wPortStatus |= + USB_PORT_STAT_RESET; + fhci_port_reset(fhci->usb_lld); + fhci->vroot_hub->port.wPortStatus |= + USB_PORT_STAT_ENABLE; + fhci->vroot_hub->port.wPortStatus &= + ~USB_PORT_STAT_RESET; + break; + case USB_PORT_FEAT_POWER: + fhci->vroot_hub->port.wPortStatus |= + USB_PORT_STAT_POWER; + fhci_config_transceiver(fhci, FHCI_PORT_WAITING); + break; + default: + goto error; + } + break; + default: +error: + retval = -EPIPE; + } + + fhci_dbg(fhci, "<- %s\n", __func__); + + spin_unlock_irqrestore(&fhci->lock, flags); + + return retval; +} diff --git a/drivers/usb/host/fhci-mem.c b/drivers/usb/host/fhci-mem.c new file mode 100644 index 0000000..2c0736c --- /dev/null +++ b/drivers/usb/host/fhci-mem.c @@ -0,0 +1,113 @@ +/* + * Freescale QUICC Engine USB Host Controller Driver + * + * Copyright (c) Freescale Semicondutor, Inc. 2006. + * Shlomi Gridish + * Jerry Huang + * Copyright (c) Logic Product Development, Inc. 2007 + * Peter Barada + * Copyright (c) MontaVista Software, Inc. 2008. + * Anton Vorontsov + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include "../core/hcd.h" +#include "fhci.h" + +static void init_td(struct td *td) +{ + memset(td, 0, sizeof(*td)); + INIT_LIST_HEAD(&td->node); + INIT_LIST_HEAD(&td->frame_lh); +} + +static void init_ed(struct ed *ed) +{ + memset(ed, 0, sizeof(*ed)); + INIT_LIST_HEAD(&ed->td_list); + INIT_LIST_HEAD(&ed->node); +} + +static struct td *get_empty_td(struct fhci_hcd *fhci) +{ + struct td *td; + + if (!list_empty(&fhci->empty_tds)) { + td = list_entry(fhci->empty_tds.next, struct td, node); + list_del(fhci->empty_tds.next); + } else { + td = kmalloc(sizeof(*td), GFP_ATOMIC); + if (!td) + fhci_err(fhci, "No memory to allocate to TD\n"); + else + init_td(td); + } + + return td; +} + +void fhci_recycle_empty_td(struct fhci_hcd *fhci, struct td *td) +{ + init_td(td); + list_add(&td->node, &fhci->empty_tds); +} + +struct ed *fhci_get_empty_ed(struct fhci_hcd *fhci) +{ + struct ed *ed; + + if (!list_empty(&fhci->empty_eds)) { + ed = list_entry(fhci->empty_eds.next, struct ed, node); + list_del(fhci->empty_eds.next); + } else { + ed = kmalloc(sizeof(*ed), GFP_ATOMIC); + if (!ed) + fhci_err(fhci, "No memory to allocate to ED\n"); + else + init_ed(ed); + } + + return ed; +} + +void fhci_recycle_empty_ed(struct fhci_hcd *fhci, struct ed *ed) +{ + init_ed(ed); + list_add(&ed->node, &fhci->empty_eds); +} + +struct td *fhci_td_fill(struct fhci_hcd *fhci, struct urb *urb, + struct urb_priv *urb_priv, struct ed *ed, u16 index, + enum fhci_ta_type type, int toggle, u8 *data, u32 len, + u16 interval, u16 start_frame, bool ioc) +{ + struct td *td = get_empty_td(fhci); + + if (!td) + return NULL; + + td->urb = urb; + td->ed = ed; + td->type = type; + td->toggle = toggle; + td->data = data; + td->len = len; + td->iso_index = index; + td->interval = interval; + td->start_frame = start_frame; + td->ioc = ioc; + td->status = USB_TD_OK; + + urb_priv->tds[index] = td; + + return td; +} diff --git a/drivers/usb/host/fhci-q.c b/drivers/usb/host/fhci-q.c new file mode 100644 index 0000000..b0a1446 --- /dev/null +++ b/drivers/usb/host/fhci-q.c @@ -0,0 +1,284 @@ +/* + * Freescale QUICC Engine USB Host Controller Driver + * + * Copyright (c) Freescale Semicondutor, Inc. 2006. + * Shlomi Gridish + * Jerry Huang + * Copyright (c) Logic Product Development, Inc. 2007 + * Peter Barada + * Copyright (c) MontaVista Software, Inc. 2008. + * Anton Vorontsov + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include "../core/hcd.h" +#include "fhci.h" + +/* maps the hardware error code to the USB error code */ +static int status_to_error(u32 status) +{ + if (status == USB_TD_OK) + return 0; + else if (status & USB_TD_RX_ER_CRC) + return -EILSEQ; + else if (status & USB_TD_RX_ER_NONOCT) + return -EPROTO; + else if (status & USB_TD_RX_ER_OVERUN) + return -ECOMM; + else if (status & USB_TD_RX_ER_BITSTUFF) + return -EPROTO; + else if (status & USB_TD_RX_ER_PID) + return -EILSEQ; + else if (status & (USB_TD_TX_ER_NAK | USB_TD_TX_ER_TIMEOUT)) + return -ETIMEDOUT; + else if (status & USB_TD_TX_ER_STALL) + return -EPIPE; + else if (status & USB_TD_TX_ER_UNDERUN) + return -ENOSR; + else if (status & USB_TD_RX_DATA_UNDERUN) + return -EREMOTEIO; + else if (status & USB_TD_RX_DATA_OVERUN) + return -EOVERFLOW; + else + return -EINVAL; +} + +void fhci_add_td_to_frame(struct fhci_time_frame *frame, struct td *td) +{ + list_add_tail(&td->frame_lh, &frame->tds_list); +} + +void fhci_add_tds_to_ed(struct ed *ed, struct td **td_list, int number) +{ + int i; + + for (i = 0; i < number; i++) { + struct td *td = td_list[i]; + list_add_tail(&td->node, &ed->td_list); + } + if (ed->td_head == NULL) + ed->td_head = td_list[0]; +} + +static struct td *peek_td_from_ed(struct ed *ed) +{ + struct td *td; + + if (!list_empty(&ed->td_list)) + td = list_entry(ed->td_list.next, struct td, node); + else + td = NULL; + + return td; +} + +struct td *fhci_remove_td_from_frame(struct fhci_time_frame *frame) +{ + struct td *td; + + if (!list_empty(&frame->tds_list)) { + td = list_entry(frame->tds_list.next, struct td, frame_lh); + list_del_init(frame->tds_list.next); + } else + td = NULL; + + return td; +} + +struct td *fhci_peek_td_from_frame(struct fhci_time_frame *frame) +{ + struct td *td; + + if (!list_empty(&frame->tds_list)) + td = list_entry(frame->tds_list.next, struct td, frame_lh); + else + td = NULL; + + return td; +} + +struct td *fhci_remove_td_from_ed(struct ed *ed) +{ + struct td *td; + + if (!list_empty(&ed->td_list)) { + td = list_entry(ed->td_list.next, struct td, node); + list_del_init(ed->td_list.next); + + /* if this TD was the ED's head, find next TD */ + if (!list_empty(&ed->td_list)) + ed->td_head = list_entry(ed->td_list.next, struct td, + node); + else + ed->td_head = NULL; + } else + td = NULL; + + return td; +} + +struct td *fhci_remove_td_from_done_list(struct fhci_controller_list *p_list) +{ + struct td *td; + + if (!list_empty(&p_list->done_list)) { + td = list_entry(p_list->done_list.next, struct td, node); + list_del_init(p_list->done_list.next); + } else + td = NULL; + + return td; +} + +void fhci_move_td_from_ed_to_done_list(struct fhci_usb *usb, struct ed *ed) +{ + struct td *td; + + td = ed->td_head; + list_del_init(&td->node); + + /* If this TD was the ED's head,find next TD */ + if (!list_empty(&ed->td_list)) + ed->td_head = list_entry(ed->td_list.next, struct td, node); + else { + ed->td_head = NULL; + ed->state = FHCI_ED_SKIP; + } + ed->toggle_carry = td->toggle; + list_add_tail(&td->node, &usb->hc_list->done_list); + if (td->ioc) + usb->transfer_confirm(usb->fhci); +} + +/* free done FHCI URB resource such as ED and TD */ +static void free_urb_priv(struct fhci_hcd *fhci, struct urb *urb) +{ + int i; + struct urb_priv *urb_priv = urb->hcpriv; + struct ed *ed = urb_priv->ed; + + for (i = 0; i < urb_priv->num_of_tds; i++) { + list_del_init(&urb_priv->tds[i]->node); + fhci_recycle_empty_td(fhci, urb_priv->tds[i]); + } + + /* if this TD was the ED's head,find the next TD */ + if (!list_empty(&ed->td_list)) + ed->td_head = list_entry(ed->td_list.next, struct td, node); + else + ed->td_head = NULL; + + kfree(urb_priv->tds); + kfree(urb_priv); + urb->hcpriv = NULL; + + /* if this TD was the ED's head,find next TD */ + if (ed->td_head == NULL) + list_del_init(&ed->node); + fhci->active_urbs--; +} + +/* this routine called to complete and free done URB */ +void fhci_urb_complete_free(struct fhci_hcd *fhci, struct urb *urb) +{ + free_urb_priv(fhci, urb); + + if (urb->status == -EINPROGRESS) { + if (urb->actual_length != urb->transfer_buffer_length && + urb->transfer_flags & URB_SHORT_NOT_OK) + urb->status = -EREMOTEIO; + else + urb->status = 0; + } + + usb_hcd_unlink_urb_from_ep(fhci_to_hcd(fhci), urb); + + spin_unlock(&fhci->lock); + + usb_hcd_giveback_urb(fhci_to_hcd(fhci), urb, urb->status); + + spin_lock(&fhci->lock); +} + +/* + * caculate transfer length/stats and update the urb + * Precondition: irqsafe(only for urb-?status locking) + */ +void fhci_done_td(struct urb *urb, struct td *td) +{ + struct ed *ed = td->ed; + u32 cc = td->status; + + /* ISO...drivers see per-TD length/status */ + if (ed->mode == FHCI_TF_ISO) { + u32 len; + if (!(urb->transfer_flags & URB_SHORT_NOT_OK && + cc == USB_TD_RX_DATA_UNDERUN)) + cc = USB_TD_OK; + + if (usb_pipeout(urb->pipe)) + len = urb->iso_frame_desc[td->iso_index].length; + else + len = td->actual_len; + + urb->actual_length += len; + urb->iso_frame_desc[td->iso_index].actual_length = len; + urb->iso_frame_desc[td->iso_index].status = + status_to_error(cc); + } + + /* BULK,INT,CONTROL... drivers see aggregate length/status, + * except that "setup" bytes aren't counted and "short" transfers + * might not be reported as errors. + */ + else { + if (td->error_cnt >= 3) + urb->error_count = 3; + + /* control endpoint only have soft stalls */ + + /* update packet status if needed(short may be ok) */ + if (!(urb->transfer_flags & URB_SHORT_NOT_OK) && + cc == USB_TD_RX_DATA_UNDERUN) { + ed->state = FHCI_ED_OPER; + cc = USB_TD_OK; + } + if (cc != USB_TD_OK) { + if (urb->status == -EINPROGRESS) + urb->status = status_to_error(cc); + } + + /* count all non-empty packets except control SETUP packet */ + if (td->type != FHCI_TA_SETUP || td->iso_index != 0) + urb->actual_length += td->actual_len; + } +} + +/* there are some pedning request to unlink */ +void fhci_del_ed_list(struct fhci_hcd *fhci, struct ed *ed) +{ + struct td *td = peek_td_from_ed(ed); + struct urb *urb = td->urb; + struct urb_priv *urb_priv = urb->hcpriv; + + if (urb_priv->state == URB_DEL) { + td = fhci_remove_td_from_ed(ed); + /* HC may have partly processed this TD */ + if (td->status != USB_TD_INPROGRESS) + fhci_done_td(urb, td); + + /* URB is done;clean up */ + if (++(urb_priv->tds_cnt) == urb_priv->num_of_tds) + fhci_urb_complete_free(fhci, urb); + } +} diff --git a/drivers/usb/host/fhci-sched.c b/drivers/usb/host/fhci-sched.c new file mode 100644 index 0000000..bb63b68 --- /dev/null +++ b/drivers/usb/host/fhci-sched.c @@ -0,0 +1,888 @@ +/* + * Freescale QUICC Engine USB Host Controller Driver + * + * Copyright (c) Freescale Semicondutor, Inc. 2006. + * Shlomi Gridish + * Jerry Huang + * Copyright (c) Logic Product Development, Inc. 2007 + * Peter Barada + * Copyright (c) MontaVista Software, Inc. 2008. + * Anton Vorontsov + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "../core/hcd.h" +#include "fhci.h" + +static void recycle_frame(struct fhci_usb *usb, struct packet *pkt) +{ + pkt->data = NULL; + pkt->len = 0; + pkt->status = USB_TD_OK; + pkt->info = 0; + pkt->priv_data = NULL; + + cq_put(usb->ep0->empty_frame_Q, pkt); +} + +/* confirm submitted packet */ +void fhci_transaction_confirm(struct fhci_usb *usb, struct packet *pkt) +{ + struct td *td; + struct packet *td_pkt; + struct ed *ed; + u32 trans_len; + bool td_done = false; + + td = fhci_remove_td_from_frame(usb->actual_frame); + td_pkt = td->pkt; + trans_len = pkt->len; + td->status = pkt->status; + if (td->type == FHCI_TA_IN && td_pkt->info & PKT_DUMMY_PACKET) { + if ((td->data + td->actual_len) && trans_len) + memcpy(td->data + td->actual_len, pkt->data, + trans_len); + cq_put(usb->ep0->dummy_packets_Q, pkt->data); + } + + recycle_frame(usb, pkt); + + ed = td->ed; + if (ed->mode == FHCI_TF_ISO) { + if (ed->td_list.next->next != &ed->td_list) { + struct td *td_next = + list_entry(ed->td_list.next->next, struct td, + node); + + td_next->start_frame = usb->actual_frame->frame_num; + } + td->actual_len = trans_len; + td_done = true; + } else if ((td->status & USB_TD_ERROR) && + !(td->status & USB_TD_TX_ER_NAK)) { + /* + * There was an error on the transaction (but not NAK). + * If it is fatal error (data underrun, stall, bad pid or 3 + * errors exceeded), mark this TD as done. + */ + if ((td->status & USB_TD_RX_DATA_UNDERUN) || + (td->status & USB_TD_TX_ER_STALL) || + (td->status & USB_TD_RX_ER_PID) || + (++td->error_cnt >= 3)) { + ed->state = FHCI_ED_HALTED; + td_done = true; + + if (td->status & USB_TD_RX_DATA_UNDERUN) { + fhci_dbg(usb->fhci, "td err fu\n"); + td->toggle = !td->toggle; + td->actual_len += trans_len; + } else { + fhci_dbg(usb->fhci, "td err f!u\n"); + } + } else { + fhci_dbg(usb->fhci, "td err !f\n"); + /* it is not a fatal error -retry this transaction */ + td->nak_cnt = 0; + td->error_cnt++; + td->status = USB_TD_OK; + } + } else if (td->status & USB_TD_TX_ER_NAK) { + /* there was a NAK response */ + fhci_vdbg(usb->fhci, "td nack\n"); + td->nak_cnt++; + td->error_cnt = 0; + td->status = USB_TD_OK; + } else { + /* there was no error on transaction */ + td->error_cnt = 0; + td->nak_cnt = 0; + td->toggle = !td->toggle; + td->actual_len += trans_len; + + if (td->len == td->actual_len) + td_done = true; + } + + if (td_done) + fhci_move_td_from_ed_to_done_list(usb, ed); +} + +/* + * Flush all transmitted packets from BDs + * This routine is called when disabling the USB port to flush all + * transmissions that are allready scheduled in the BDs + */ +void fhci_flush_all_transmissions(struct fhci_usb *usb) +{ + u8 mode; + struct td *td; + + mode = in_8(&usb->fhci->regs->usb_mod); + clrbits8(&usb->fhci->regs->usb_mod, USB_MODE_EN); + + fhci_flush_bds(usb); + + while ((td = fhci_peek_td_from_frame(usb->actual_frame)) != NULL) { + struct packet *pkt = td->pkt; + + pkt->status = USB_TD_TX_ER_TIMEOUT; + fhci_transaction_confirm(usb, pkt); + } + + usb->actual_frame->frame_status = FRAME_END_TRANSMISSION; + + /* reset the event register */ + out_be16(&usb->fhci->regs->usb_event, 0xffff); + /* enable the USB controller */ + out_8(&usb->fhci->regs->usb_mod, mode | USB_MODE_EN); +} + +/* + * This function forms the packet and transmit the packet. This function + * will handle all endpoint type:ISO,interrupt,control and bulk + */ +static int add_packet(struct fhci_usb *usb, struct ed *ed, struct td *td) +{ + u32 fw_transaction_time, len = 0; + struct packet *pkt; + u8 *data = NULL; + + /* calcalate data address,len and toggle and then add the transaction */ + if (td->toggle == USB_TD_TOGGLE_CARRY) + td->toggle = ed->toggle_carry; + + switch (ed->mode) { + case FHCI_TF_ISO: + len = td->len; + if (td->type != FHCI_TA_IN) + data = td->data; + break; + case FHCI_TF_CTRL: + case FHCI_TF_BULK: + len = min(td->len - td->actual_len, ed->max_pkt_size); + if (!((td->type == FHCI_TA_IN) && + ((len + td->actual_len) == td->len))) + data = td->data + td->actual_len; + break; + case FHCI_TF_INTR: + len = min(td->len, ed->max_pkt_size); + if (!((td->type == FHCI_TA_IN) && + ((td->len + CRC_SIZE) >= ed->max_pkt_size))) + data = td->data; + break; + default: + break; + } + + if (usb->port_status == FHCI_PORT_FULL) + fw_transaction_time = (((len + PROTOCOL_OVERHEAD) * 11) >> 4); + else + fw_transaction_time = ((len + PROTOCOL_OVERHEAD) * 6); + + /* check if there's enough space in this frame to submit this TD */ + if (usb->actual_frame->total_bytes + len + PROTOCOL_OVERHEAD >= + usb->max_bytes_per_frame) { + fhci_vdbg(usb->fhci, "not enough space in this frame: " + "%d %d %d\n", usb->actual_frame->total_bytes, len, + usb->max_bytes_per_frame); + return -1; + } + + /* check if there's enough time in this frame to submit this TD */ + if (usb->actual_frame->frame_status != FRAME_IS_PREPARED && + (usb->actual_frame->frame_status & FRAME_END_TRANSMISSION || + (fw_transaction_time + usb->sw_transaction_time >= + 1000 - fhci_get_sof_timer_count(usb)))) { + fhci_dbg(usb->fhci, "not enough time in this frame\n"); + return -1; + } + + /* update frame object fields before transmitting */ + pkt = cq_get(usb->ep0->empty_frame_Q); + if (!pkt) { + fhci_dbg(usb->fhci, "there is no empty frame\n"); + return -1; + } + td->pkt = pkt; + + pkt->info = 0; + if (data == NULL) { + data = cq_get(usb->ep0->dummy_packets_Q); + BUG_ON(!data); + pkt->info = PKT_DUMMY_PACKET; + } + pkt->data = data; + pkt->len = len; + pkt->status = USB_TD_OK; + /* update TD status field before transmitting */ + td->status = USB_TD_INPROGRESS; + /* update actual frame time object with the actual transmission */ + usb->actual_frame->total_bytes += (len + PROTOCOL_OVERHEAD); + fhci_add_td_to_frame(usb->actual_frame, td); + + if (usb->port_status != FHCI_PORT_FULL && + usb->port_status != FHCI_PORT_LOW) { + pkt->status = USB_TD_TX_ER_TIMEOUT; + pkt->len = 0; + fhci_transaction_confirm(usb, pkt); + } else if (fhci_host_transaction(usb, pkt, td->type, ed->dev_addr, + ed->ep_addr, ed->mode, ed->speed, td->toggle)) { + /* remove TD from actual frame */ + list_del_init(&td->frame_lh); + td->status = USB_TD_OK; + if (pkt->info & PKT_DUMMY_PACKET) + cq_put(usb->ep0->dummy_packets_Q, pkt->data); + recycle_frame(usb, pkt); + usb->actual_frame->total_bytes -= (len + PROTOCOL_OVERHEAD); + fhci_err(usb->fhci, "host transaction failed\n"); + return -1; + } + + return len; +} + +static void move_head_to_tail(struct list_head *list) +{ + struct list_head *node = list->next; + + if (!list_empty(list)) { + list_del(node); + list_add_tail(node, list); + } +} + +/* + * This function goes through the endpoint list and schedules the + * transactions within this list + */ +static int scan_ed_list(struct fhci_usb *usb, + struct list_head *list, enum fhci_tf_mode list_type) +{ + static const int frame_part[4] = { + [FHCI_TF_CTRL] = MAX_BYTES_PER_FRAME, + [FHCI_TF_ISO] = (MAX_BYTES_PER_FRAME * + MAX_PERIODIC_FRAME_USAGE) / 100, + [FHCI_TF_BULK] = MAX_BYTES_PER_FRAME, + [FHCI_TF_INTR] = (MAX_BYTES_PER_FRAME * + MAX_PERIODIC_FRAME_USAGE) / 100 + }; + struct ed *ed; + struct td *td; + int ans = 1; + u32 save_transaction_time = usb->sw_transaction_time; + + list_for_each_entry(ed, list, node) { + td = ed->td_head; + + if (!td || (td && td->status == USB_TD_INPROGRESS)) + continue; + + if (ed->state != FHCI_ED_OPER) { + if (ed->state == FHCI_ED_URB_DEL) { + td->status = USB_TD_OK; + fhci_move_td_from_ed_to_done_list(usb, ed); + ed->state = FHCI_ED_SKIP; + } + continue; + } + + /* + * if it isn't interrupt pipe or it is not iso pipe and the + * interval time passed + */ + if ((list_type == FHCI_TF_INTR || list_type == FHCI_TF_ISO) && + (((usb->actual_frame->frame_num - + td->start_frame) & 0x7ff) < td->interval)) + continue; + + if (add_packet(usb, ed, td) < 0) + continue; + + /* update time stamps in the TD */ + td->start_frame = usb->actual_frame->frame_num; + usb->sw_transaction_time += save_transaction_time; + + if (usb->actual_frame->total_bytes >= + usb->max_bytes_per_frame) { + usb->actual_frame->frame_status = + FRAME_DATA_END_TRANSMISSION; + fhci_push_dummy_bd(usb->ep0); + ans = 0; + break; + } + + if (usb->actual_frame->total_bytes >= frame_part[list_type]) + break; + } + + /* be fair to each ED(move list head around) */ + move_head_to_tail(list); + usb->sw_transaction_time = save_transaction_time; + + return ans; +} + +static u32 rotate_frames(struct fhci_usb *usb) +{ + struct fhci_hcd *fhci = usb->fhci; + + if (!list_empty(&usb->actual_frame->tds_list)) { + if ((((in_be16(&fhci->pram->frame_num) & 0x07ff) - + usb->actual_frame->frame_num) & 0x7ff) > 5) + fhci_flush_actual_frame(usb); + else + return -EINVAL; + } + + usb->actual_frame->frame_status = FRAME_IS_PREPARED; + usb->actual_frame->frame_num = in_be16(&fhci->pram->frame_num) & 0x7ff; + usb->actual_frame->total_bytes = 0; + + return 0; +} + +/* + * This function schedule the USB transaction and will process the + * endpoint in the following order: iso, interrupt, control and bulk. + */ +void fhci_schedule_transactions(struct fhci_usb *usb) +{ + int left = 1; + + if (usb->actual_frame->frame_status & FRAME_END_TRANSMISSION) + if (rotate_frames(usb) != 0) + return; + + if (usb->actual_frame->frame_status & FRAME_END_TRANSMISSION) + return; + + if (usb->actual_frame->total_bytes == 0) { + /* + * schedule the next available ISO transfer + *or next stage of the ISO transfer + */ + scan_ed_list(usb, &usb->hc_list->iso_list, FHCI_TF_ISO); + + /* + * schedule the next available interrupt transfer or + * the next stage of the interrupt transfer + */ + scan_ed_list(usb, &usb->hc_list->intr_list, FHCI_TF_INTR); + + /* + * schedule the next available control transfer + * or the next stage of the control transfer + */ + left = scan_ed_list(usb, &usb->hc_list->ctrl_list, + FHCI_TF_CTRL); + } + + /* + * schedule the next available bulk transfer or the next stage of the + * bulk transfer + */ + if (left > 0) + scan_ed_list(usb, &usb->hc_list->bulk_list, FHCI_TF_BULK); +} + +/* Handles SOF interrupt */ +static void sof_interrupt(struct fhci_hcd *fhci) +{ + struct fhci_usb *usb = fhci->usb_lld; + + if ((usb->port_status == FHCI_PORT_DISABLED) && + (usb->vroot_hub->port.wPortStatus & USB_PORT_STAT_CONNECTION) && + !(usb->vroot_hub->port.wPortChange & USB_PORT_STAT_C_CONNECTION)) { + if (usb->vroot_hub->port.wPortStatus & USB_PORT_STAT_LOW_SPEED) + usb->port_status = FHCI_PORT_LOW; + else + usb->port_status = FHCI_PORT_FULL; + /* Disable IDLE */ + usb->saved_msk &= ~USB_E_IDLE_MASK; + out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk); + } + + gtm_set_exact_timer16(fhci->timer, usb->max_frame_usage, false); + + fhci_host_transmit_actual_frame(usb); + usb->actual_frame->frame_status = FRAME_IS_TRANSMITTED; + + fhci_schedule_transactions(usb); +} + +/* Handles device disconnected interrupt on port */ +void fhci_device_disconnected_interrupt(struct fhci_hcd *fhci) +{ + struct fhci_usb *usb = fhci->usb_lld; + + fhci_dbg(fhci, "-> %s\n", __func__); + + fhci_usb_disable_interrupt(usb); + clrbits8(&usb->fhci->regs->usb_mod, USB_MODE_LSS); + usb->port_status = FHCI_PORT_DISABLED; + + fhci_stop_sof_timer(fhci); + + /* Enable IDLE since we want to know if something comes along */ + usb->saved_msk |= USB_E_IDLE_MASK; + out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk); + + usb->vroot_hub->port.wPortStatus &= ~USB_PORT_STAT_CONNECTION; + usb->vroot_hub->port.wPortChange |= USB_PORT_STAT_C_CONNECTION; + usb->max_bytes_per_frame = 0; + fhci_usb_enable_interrupt(usb); + + fhci_dbg(fhci, "<- %s\n", __func__); +} + +/* detect a new device connected on the USB port */ +void fhci_device_connected_interrupt(struct fhci_hcd *fhci) +{ + + struct fhci_usb *usb = fhci->usb_lld; + int state; + int ret; + + fhci_dbg(fhci, "-> %s\n", __func__); + + fhci_usb_disable_interrupt(usb); + state = fhci_ioports_check_bus_state(fhci); + + /* low-speed device was connected to the USB port */ + if (state == 1) { + ret = qe_usb_clock_set(fhci->lowspeed_clk, USB_CLOCK >> 3); + if (ret) { + fhci_warn(fhci, "Low-Speed device is not supported, " + "try use BRGx\n"); + goto out; + } + + usb->port_status = FHCI_PORT_LOW; + setbits8(&usb->fhci->regs->usb_mod, USB_MODE_LSS); + usb->vroot_hub->port.wPortStatus |= + (USB_PORT_STAT_LOW_SPEED | + USB_PORT_STAT_CONNECTION); + usb->vroot_hub->port.wPortChange |= + USB_PORT_STAT_C_CONNECTION; + usb->max_bytes_per_frame = + (MAX_BYTES_PER_FRAME >> 3) - 7; + fhci_port_enable(usb); + } else if (state == 2) { + ret = qe_usb_clock_set(fhci->fullspeed_clk, USB_CLOCK); + if (ret) { + fhci_warn(fhci, "Full-Speed device is not supported, " + "try use CLKx\n"); + goto out; + } + + usb->port_status = FHCI_PORT_FULL; + clrbits8(&usb->fhci->regs->usb_mod, USB_MODE_LSS); + usb->vroot_hub->port.wPortStatus &= + ~USB_PORT_STAT_LOW_SPEED; + usb->vroot_hub->port.wPortStatus |= + USB_PORT_STAT_CONNECTION; + usb->vroot_hub->port.wPortChange |= + USB_PORT_STAT_C_CONNECTION; + usb->max_bytes_per_frame = (MAX_BYTES_PER_FRAME - 15); + fhci_port_enable(usb); + } +out: + fhci_usb_enable_interrupt(usb); + fhci_dbg(fhci, "<- %s\n", __func__); +} + +irqreturn_t fhci_frame_limit_timer_irq(int irq, void *_hcd) +{ + struct usb_hcd *hcd = _hcd; + struct fhci_hcd *fhci = hcd_to_fhci(hcd); + struct fhci_usb *usb = fhci->usb_lld; + + spin_lock(&fhci->lock); + + gtm_set_exact_timer16(fhci->timer, 1000, false); + + if (usb->actual_frame->frame_status == FRAME_IS_TRANSMITTED) { + usb->actual_frame->frame_status = FRAME_TIMER_END_TRANSMISSION; + fhci_push_dummy_bd(usb->ep0); + } + + fhci_schedule_transactions(usb); + + spin_unlock(&fhci->lock); + + return IRQ_HANDLED; +} + +/* Cancel transmission on the USB endpoint */ +static void abort_transmission(struct fhci_usb *usb) +{ + fhci_dbg(usb->fhci, "-> %s\n", __func__); + /* issue stop Tx command */ + qe_issue_cmd(QE_USB_STOP_TX, QE_CR_SUBBLOCK_USB, EP_ZERO, 0); + /* flush Tx FIFOs */ + out_8(&usb->fhci->regs->usb_comm, USB_CMD_FLUSH_FIFO | EP_ZERO); + udelay(1000); + /* reset Tx BDs */ + fhci_flush_bds(usb); + /* issue restart Tx command */ + qe_issue_cmd(QE_USB_RESTART_TX, QE_CR_SUBBLOCK_USB, EP_ZERO, 0); + fhci_dbg(usb->fhci, "<- %s\n", __func__); +} + +irqreturn_t fhci_irq(struct usb_hcd *hcd) +{ + struct fhci_hcd *fhci = hcd_to_fhci(hcd); + struct fhci_usb *usb; + u16 usb_er = 0; + unsigned long flags; + + spin_lock_irqsave(&fhci->lock, flags); + + usb = fhci->usb_lld; + + usb_er |= in_be16(&usb->fhci->regs->usb_event) & + in_be16(&usb->fhci->regs->usb_mask); + + /* clear event bits for next time */ + out_be16(&usb->fhci->regs->usb_event, usb_er); + + fhci_dbg_isr(fhci, usb_er); + + if (usb_er & USB_E_RESET_MASK) { + if ((usb->port_status == FHCI_PORT_FULL) || + (usb->port_status == FHCI_PORT_LOW)) { + fhci_device_disconnected_interrupt(fhci); + usb_er &= ~USB_E_IDLE_MASK; + } else if (usb->port_status == FHCI_PORT_WAITING) { + usb->port_status = FHCI_PORT_DISCONNECTING; + + /* Turn on IDLE since we want to disconnect */ + usb->saved_msk |= USB_E_IDLE_MASK; + out_be16(&usb->fhci->regs->usb_event, + usb->saved_msk); + } else if (usb->port_status == FHCI_PORT_DISABLED) { + if (fhci_ioports_check_bus_state(fhci) == 1 && + usb->port_status != FHCI_PORT_LOW && + usb->port_status != FHCI_PORT_FULL) + fhci_device_connected_interrupt(fhci); + } + usb_er &= ~USB_E_RESET_MASK; + } + + if (usb_er & USB_E_MSF_MASK) { + abort_transmission(fhci->usb_lld); + usb_er &= ~USB_E_MSF_MASK; + } + + if (usb_er & (USB_E_SOF_MASK | USB_E_SFT_MASK)) { + sof_interrupt(fhci); + usb_er &= ~(USB_E_SOF_MASK | USB_E_SFT_MASK); + } + + if (usb_er & USB_E_TXB_MASK) { + fhci_tx_conf_interrupt(fhci->usb_lld); + usb_er &= ~USB_E_TXB_MASK; + } + + if (usb_er & USB_E_TXE1_MASK) { + fhci_tx_conf_interrupt(fhci->usb_lld); + usb_er &= ~USB_E_TXE1_MASK; + } + + if (usb_er & USB_E_IDLE_MASK) { + if (usb->port_status == FHCI_PORT_DISABLED && + usb->port_status != FHCI_PORT_LOW && + usb->port_status != FHCI_PORT_FULL) { + usb_er &= ~USB_E_RESET_MASK; + fhci_device_connected_interrupt(fhci); + } else if (usb->port_status == + FHCI_PORT_DISCONNECTING) { + /* XXX usb->port_status = FHCI_PORT_WAITING; */ + /* Disable IDLE */ + usb->saved_msk &= ~USB_E_IDLE_MASK; + out_be16(&usb->fhci->regs->usb_mask, + usb->saved_msk); + } else { + fhci_dbg_isr(fhci, -1); + } + + usb_er &= ~USB_E_IDLE_MASK; + } + + spin_unlock_irqrestore(&fhci->lock, flags); + + return IRQ_HANDLED; +} + + +/* + * Process normal completions(error or sucess) and clean the schedule. + * + * This is the main path for handing urbs back to drivers. The only other patth + * is process_del_list(),which unlinks URBs by scanning EDs,instead of scanning + * the (re-reversed) done list as this does. + */ +static void process_done_list(unsigned long data) +{ + struct urb *urb; + struct ed *ed; + struct td *td; + struct urb_priv *urb_priv; + struct fhci_hcd *fhci = (struct fhci_hcd *)data; + + disable_irq(fhci->timer->irq); + disable_irq(fhci_to_hcd(fhci)->irq); + spin_lock(&fhci->lock); + + td = fhci_remove_td_from_done_list(fhci->hc_list); + while (td != NULL) { + urb = td->urb; + urb_priv = urb->hcpriv; + ed = td->ed; + + /* update URB's length and status from TD */ + fhci_done_td(urb, td); + urb_priv->tds_cnt++; + + /* + * if all this urb's TDs are done, call complete() + * Interrupt transfers are the onley special case: + * they are reissued,until "deleted" by usb_unlink_urb + * (real work done in a SOF intr, by process_del_list) + */ + if (urb_priv->tds_cnt == urb_priv->num_of_tds) { + fhci_urb_complete_free(fhci, urb); + } else if (urb_priv->state == URB_DEL && + ed->state == FHCI_ED_SKIP) { + fhci_del_ed_list(fhci, ed); + ed->state = FHCI_ED_OPER; + } else if (ed->state == FHCI_ED_HALTED) { + urb_priv->state = URB_DEL; + ed->state = FHCI_ED_URB_DEL; + fhci_del_ed_list(fhci, ed); + ed->state = FHCI_ED_OPER; + } + + td = fhci_remove_td_from_done_list(fhci->hc_list); + } + + spin_unlock(&fhci->lock); + enable_irq(fhci->timer->irq); + enable_irq(fhci_to_hcd(fhci)->irq); +} + +DECLARE_TASKLET(fhci_tasklet, process_done_list, 0); + +/* transfer complted callback */ +u32 fhci_transfer_confirm_callback(struct fhci_hcd *fhci) +{ + if (!fhci->process_done_task->state) + tasklet_schedule(fhci->process_done_task); + return 0; +} + +/* + * adds urb to the endpoint descriptor list + * arguments: + * fhci data structure for the Low level host controller + * ep USB Host endpoint data structure + * urb USB request block data structure + */ +void fhci_queue_urb(struct fhci_hcd *fhci, struct urb *urb) +{ + struct ed *ed = urb->ep->hcpriv; + struct urb_priv *urb_priv = urb->hcpriv; + u32 data_len = urb->transfer_buffer_length; + int urb_state = 0; + int toggle = 0; + struct td *td; + u8 *data; + u16 cnt = 0; + + if (ed == NULL) { + ed = fhci_get_empty_ed(fhci); + ed->dev_addr = usb_pipedevice(urb->pipe); + ed->ep_addr = usb_pipeendpoint(urb->pipe); + switch (usb_pipetype(urb->pipe)) { + case PIPE_CONTROL: + ed->mode = FHCI_TF_CTRL; + break; + case PIPE_BULK: + ed->mode = FHCI_TF_BULK; + break; + case PIPE_INTERRUPT: + ed->mode = FHCI_TF_INTR; + break; + case PIPE_ISOCHRONOUS: + ed->mode = FHCI_TF_ISO; + break; + default: + break; + } + ed->speed = (urb->dev->speed == USB_SPEED_LOW) ? + FHCI_LOW_SPEED : FHCI_FULL_SPEED; + ed->max_pkt_size = usb_maxpacket(urb->dev, + urb->pipe, usb_pipeout(urb->pipe)); + urb->ep->hcpriv = ed; + fhci_dbg(fhci, "new ep speed=%d max_pkt_size=%d\n", + ed->speed, ed->max_pkt_size); + } + + /* for ISO transfer calculate start frame index */ + if (ed->mode == FHCI_TF_ISO && urb->transfer_flags & URB_ISO_ASAP) + urb->start_frame = ed->td_head ? ed->last_iso + 1 : + get_frame_num(fhci); + + /* + * OHCI handles the DATA toggle itself,we just use the USB + * toggle bits + */ + if (usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), + usb_pipeout(urb->pipe))) + toggle = USB_TD_TOGGLE_CARRY; + else { + toggle = USB_TD_TOGGLE_DATA0; + usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), + usb_pipeout(urb->pipe), 1); + } + + urb_priv->tds_cnt = 0; + urb_priv->ed = ed; + if (data_len > 0) + data = urb->transfer_buffer; + else + data = NULL; + + switch (ed->mode) { + case FHCI_TF_BULK: + if (urb->transfer_flags & URB_ZERO_PACKET && + urb->transfer_buffer_length > 0 && + ((urb->transfer_buffer_length % + usb_maxpacket(urb->dev, urb->pipe, + usb_pipeout(urb->pipe))) == 0)) + urb_state = US_BULK0; + while (data_len > 4096) { + td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt, + usb_pipeout(urb->pipe) ? FHCI_TA_OUT : + FHCI_TA_IN, + cnt ? USB_TD_TOGGLE_CARRY : + toggle, + data, 4096, 0, 0, true); + data += 4096; + data_len -= 4096; + cnt++; + } + + td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt, + usb_pipeout(urb->pipe) ? FHCI_TA_OUT : FHCI_TA_IN, + cnt ? USB_TD_TOGGLE_CARRY : toggle, + data, data_len, 0, 0, true); + cnt++; + + if (urb->transfer_flags & URB_ZERO_PACKET && + cnt < urb_priv->num_of_tds) { + td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt, + usb_pipeout(urb->pipe) ? FHCI_TA_OUT : + FHCI_TA_IN, + USB_TD_TOGGLE_CARRY, NULL, 0, 0, 0, true); + cnt++; + } + break; + case FHCI_TF_INTR: + urb->start_frame = get_frame_num(fhci) + 1; + td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++, + usb_pipeout(urb->pipe) ? FHCI_TA_OUT : FHCI_TA_IN, + USB_TD_TOGGLE_DATA0, data, data_len, + urb->interval, urb->start_frame, true); + break; + case FHCI_TF_CTRL: + ed->dev_addr = usb_pipedevice(urb->pipe); + ed->max_pkt_size = usb_maxpacket(urb->dev, urb->pipe, + usb_pipeout(urb->pipe)); + td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++, FHCI_TA_SETUP, + USB_TD_TOGGLE_DATA0, urb->setup_packet, 8, 0, 0, true); + + if (data_len > 0) { + td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++, + usb_pipeout(urb->pipe) ? FHCI_TA_OUT : + FHCI_TA_IN, + USB_TD_TOGGLE_DATA1, data, data_len, 0, 0, + true); + } + td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++, + usb_pipeout(urb->pipe) ? FHCI_TA_IN : FHCI_TA_OUT, + USB_TD_TOGGLE_DATA1, data, 0, 0, 0, true); + urb_state = US_CTRL_SETUP; + break; + case FHCI_TF_ISO: + for (cnt = 0; cnt < urb->number_of_packets; cnt++) { + u16 frame = urb->start_frame; + + /* + * FIXME scheduling should handle frame counter + * roll-around ... exotic case (and OHCI has + * a 2^16 iso range, vs other HCs max of 2^10) + */ + frame += cnt * urb->interval; + frame &= 0x07ff; + td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt, + usb_pipeout(urb->pipe) ? FHCI_TA_OUT : + FHCI_TA_IN, + USB_TD_TOGGLE_DATA0, + data + urb->iso_frame_desc[cnt].offset, + urb->iso_frame_desc[cnt].length, + urb->interval, frame, true); + } + break; + default: + break; + } + + /* + * set the state of URB + * control pipe:3 states -- setup,data,status + * interrupt and bulk pipe:1 state -- data + */ + urb->pipe &= ~0x1f; + urb->pipe |= urb_state & 0x1f; + + urb_priv->state = URB_INPROGRESS; + + if (!ed->td_head) { + ed->state = FHCI_ED_OPER; + switch (ed->mode) { + case FHCI_TF_CTRL: + list_add(&ed->node, &fhci->hc_list->ctrl_list); + break; + case FHCI_TF_BULK: + list_add(&ed->node, &fhci->hc_list->bulk_list); + break; + case FHCI_TF_INTR: + list_add(&ed->node, &fhci->hc_list->intr_list); + break; + case FHCI_TF_ISO: + list_add(&ed->node, &fhci->hc_list->iso_list); + break; + default: + break; + } + } + + fhci_add_tds_to_ed(ed, urb_priv->tds, urb_priv->num_of_tds); + fhci->active_urbs++; +} diff --git a/drivers/usb/host/fhci-tds.c b/drivers/usb/host/fhci-tds.c new file mode 100644 index 0000000..b403322 --- /dev/null +++ b/drivers/usb/host/fhci-tds.c @@ -0,0 +1,626 @@ +/* + * Freescale QUICC Engine USB Host Controller Driver + * + * Copyright (c) Freescale Semicondutor, Inc. 2006. + * Shlomi Gridish + * Jerry Huang + * Copyright (c) Logic Product Development, Inc. 2007 + * Peter Barada + * Copyright (c) MontaVista Software, Inc. 2008. + * Anton Vorontsov + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include "../core/hcd.h" +#include "fhci.h" + +#define DUMMY_BD_BUFFER 0xdeadbeef +#define DUMMY2_BD_BUFFER 0xbaadf00d + +/* Transaction Descriptors bits */ +#define TD_R 0x8000 /* ready bit */ +#define TD_W 0x2000 /* wrap bit */ +#define TD_I 0x1000 /* interrupt on completion */ +#define TD_L 0x0800 /* last */ +#define TD_TC 0x0400 /* transmit CRC */ +#define TD_CNF 0x0200 /* CNF - Must be always 1 */ +#define TD_LSP 0x0100 /* Low-speed transaction */ +#define TD_PID 0x00c0 /* packet id */ +#define TD_RXER 0x0020 /* Rx error or not */ + +#define TD_NAK 0x0010 /* No ack. */ +#define TD_STAL 0x0008 /* Stall recieved */ +#define TD_TO 0x0004 /* time out */ +#define TD_UN 0x0002 /* underrun */ +#define TD_NO 0x0010 /* Rx Non Octet Aligned Packet */ +#define TD_AB 0x0008 /* Frame Aborted */ +#define TD_CR 0x0004 /* CRC Error */ +#define TD_OV 0x0002 /* Overrun */ +#define TD_BOV 0x0001 /* Buffer Overrun */ + +#define TD_ERRORS (TD_NAK | TD_STAL | TD_TO | TD_UN | \ + TD_NO | TD_AB | TD_CR | TD_OV | TD_BOV) + +#define TD_PID_DATA0 0x0080 /* Data 0 toggle */ +#define TD_PID_DATA1 0x00c0 /* Data 1 toggle */ +#define TD_PID_TOGGLE 0x00c0 /* Data 0/1 toggle mask */ + +#define TD_TOK_SETUP 0x0000 +#define TD_TOK_OUT 0x4000 +#define TD_TOK_IN 0x8000 +#define TD_ISO 0x1000 +#define TD_ENDP 0x0780 +#define TD_ADDR 0x007f + +#define TD_ENDP_SHIFT 7 + +struct usb_td { + __be16 status; + __be16 length; + __be32 buf_ptr; + __be16 extra; + __be16 reserved; +}; + +static struct usb_td __iomem *next_bd(struct usb_td __iomem *base, + struct usb_td __iomem *td, + u16 status) +{ + if (status & TD_W) + return base; + else + return ++td; +} + +void fhci_push_dummy_bd(struct endpoint *ep) +{ + if (ep->already_pushed_dummy_bd == false) { + u16 td_status = in_be16(&ep->empty_td->status); + + out_be32(&ep->empty_td->buf_ptr, DUMMY_BD_BUFFER); + /* get the next TD in the ring */ + ep->empty_td = next_bd(ep->td_base, ep->empty_td, td_status); + ep->already_pushed_dummy_bd = true; + } +} + +/* destroy an USB endpoint */ +void fhci_ep0_free(struct fhci_usb *usb) +{ + struct endpoint *ep; + int size; + + ep = usb->ep0; + if (ep) { + if (ep->td_base) + cpm_muram_free(cpm_muram_offset(ep->td_base)); + + if (ep->conf_frame_Q) { + size = cq_howmany(ep->conf_frame_Q); + for (; size; size--) { + struct packet *pkt = cq_get(ep->conf_frame_Q); + + kfree(pkt); + } + cq_delete(ep->conf_frame_Q); + } + + if (ep->empty_frame_Q) { + size = cq_howmany(ep->empty_frame_Q); + for (; size; size--) { + struct packet *pkt = cq_get(ep->empty_frame_Q); + + kfree(pkt); + } + cq_delete(ep->empty_frame_Q); + } + + if (ep->dummy_packets_Q) { + size = cq_howmany(ep->dummy_packets_Q); + for (; size; size--) { + u8 *buff = cq_get(ep->dummy_packets_Q); + + kfree(buff); + } + cq_delete(ep->dummy_packets_Q); + } + + kfree(ep); + usb->ep0 = NULL; + } +} + +/* + * create the endpoint structure + * + * arguments: + * usb A pointer to the data structure of the USB + * data_mem The data memory partition(BUS) + * ring_len TD ring length + */ +u32 fhci_create_ep(struct fhci_usb *usb, enum fhci_mem_alloc data_mem, + u32 ring_len) +{ + struct endpoint *ep; + struct usb_td __iomem *td; + unsigned long ep_offset; + char *err_for = "enpoint PRAM"; + int ep_mem_size; + u32 i; + + /* we need at least 3 TDs in the ring */ + if (!(ring_len > 2)) { + fhci_err(usb->fhci, "illegal TD ring length parameters\n"); + return -EINVAL; + } + + ep = kzalloc(sizeof(*ep), GFP_KERNEL); + if (!ep) + return -ENOMEM; + + ep_mem_size = ring_len * sizeof(*td) + sizeof(struct fhci_ep_pram); + ep_offset = cpm_muram_alloc(ep_mem_size, 32); + if (IS_ERR_VALUE(ep_offset)) + goto err; + ep->td_base = cpm_muram_addr(ep_offset); + + /* zero all queue pointers */ + ep->conf_frame_Q = cq_new(ring_len + 2); + ep->empty_frame_Q = cq_new(ring_len + 2); + ep->dummy_packets_Q = cq_new(ring_len + 2); + if (!ep->conf_frame_Q || !ep->empty_frame_Q || !ep->dummy_packets_Q) { + err_for = "frame_queues"; + goto err; + } + + for (i = 0; i < (ring_len + 1); i++) { + struct packet *pkt; + u8 *buff; + + pkt = kmalloc(sizeof(*pkt), GFP_KERNEL); + if (!pkt) { + err_for = "frame"; + goto err; + } + + buff = kmalloc(1028 * sizeof(*buff), GFP_KERNEL); + if (!buff) { + kfree(pkt); + err_for = "buffer"; + goto err; + } + cq_put(ep->empty_frame_Q, pkt); + cq_put(ep->dummy_packets_Q, buff); + } + + /* we put the endpoint parameter RAM right behind the TD ring */ + ep->ep_pram_ptr = (void __iomem *)ep->td_base + sizeof(*td) * ring_len; + + ep->conf_td = ep->td_base; + ep->empty_td = ep->td_base; + + ep->already_pushed_dummy_bd = false; + + /* initialize tds */ + td = ep->td_base; + for (i = 0; i < ring_len; i++) { + out_be32(&td->buf_ptr, 0); + out_be16(&td->status, 0); + out_be16(&td->length, 0); + out_be16(&td->extra, 0); + td++; + } + td--; + out_be16(&td->status, TD_W); /* for last TD set Wrap bit */ + out_be16(&td->length, 0); + + /* endpoint structure has been created */ + usb->ep0 = ep; + + return 0; +err: + fhci_ep0_free(usb); + kfree(ep); + fhci_err(usb->fhci, "no memory for the %s\n", err_for); + return -ENOMEM; +} + +/* + * initialize the endpoint register according to the given parameters + * + * artuments: + * usb A pointer to the data strucutre of the USB + * ep A pointer to the endpoint structre + * data_mem The data memory partition(BUS) + */ +void fhci_init_ep_registers(struct fhci_usb *usb, struct endpoint *ep, + enum fhci_mem_alloc data_mem) +{ + u8 rt; + + /* set the endpoint registers according to the endpoint */ + out_be16(&usb->fhci->regs->usb_ep[0], + USB_TRANS_CTR | USB_EP_MF | USB_EP_RTE); + out_be16(&usb->fhci->pram->ep_ptr[0], + cpm_muram_offset(ep->ep_pram_ptr)); + + rt = (BUS_MODE_BO_BE | BUS_MODE_GBL); +#ifdef MULTI_DATA_BUS + if (data_mem == MEM_SECONDARY) + rt |= BUS_MODE_DTB; +#endif + out_8(&ep->ep_pram_ptr->rx_func_code, rt); + out_8(&ep->ep_pram_ptr->tx_func_code, rt); + out_be16(&ep->ep_pram_ptr->rx_buff_len, 1028); + out_be16(&ep->ep_pram_ptr->rx_base, 0); + out_be16(&ep->ep_pram_ptr->tx_base, cpm_muram_offset(ep->td_base)); + out_be16(&ep->ep_pram_ptr->rx_bd_ptr, 0); + out_be16(&ep->ep_pram_ptr->tx_bd_ptr, cpm_muram_offset(ep->td_base)); + out_be32(&ep->ep_pram_ptr->tx_state, 0); +} + +/* + * Collect the submitted frames and inform the application about them + * It is also prepearing the TDs for new frames. If the Tx interrupts + * are diabled, the application should call that routine to get + * confirmation about the submitted frames. Otherwise, the routine is + * called frome the interrupt service routine during the Tx interrupt. + * In that case the application is informed by calling the application + * specific 'fhci_transaction_confirm' routine + */ +static void fhci_td_transaction_confirm(struct fhci_usb *usb) +{ + struct endpoint *ep = usb->ep0; + struct packet *pkt; + struct usb_td __iomem *td; + u16 extra_data; + u16 td_status; + u16 td_length; + u32 buf; + + /* + * collect transmitted BDs from the chip. The routine clears all BDs + * with R bit = 0 and the pointer to data buffer is not NULL, that is + * BDs which point to the transmitted data buffer + */ + while (1) { + td = ep->conf_td; + td_status = in_be16(&td->status); + td_length = in_be16(&td->length); + buf = in_be32(&td->buf_ptr); + extra_data = in_be16(&td->extra); + + /* check if the TD is empty */ + if (!(!(td_status & TD_R) && ((td_status & ~TD_W) || buf))) + break; + /* check if it is a dummy buffer */ + else if ((buf == DUMMY_BD_BUFFER) && !(td_status & ~TD_W)) + break; + + /* mark TD as empty */ + clrbits16(&td->status, ~TD_W); + out_be16(&td->length, 0); + out_be32(&td->buf_ptr, 0); + out_be16(&td->extra, 0); + /* advance the TD pointer */ + ep->conf_td = next_bd(ep->td_base, ep->conf_td, td_status); + + /* check if it is a dummy buffer(type2) */ + if ((buf == DUMMY2_BD_BUFFER) && !(td_status & ~TD_W)) + continue; + + pkt = cq_get(ep->conf_frame_Q); + if (!pkt) + fhci_err(usb->fhci, "no frame to confirm\n"); + + if (td_status & TD_ERRORS) { + if (td_status & TD_RXER) { + if (td_status & TD_CR) + pkt->status = USB_TD_RX_ER_CRC; + else if (td_status & TD_AB) + pkt->status = USB_TD_RX_ER_BITSTUFF; + else if (td_status & TD_OV) + pkt->status = USB_TD_RX_ER_OVERUN; + else if (td_status & TD_BOV) + pkt->status = USB_TD_RX_DATA_OVERUN; + else if (td_status & TD_NO) + pkt->status = USB_TD_RX_ER_NONOCT; + else + fhci_err(usb->fhci, "illegal error " + "occured\n"); + } else if (td_status & TD_NAK) + pkt->status = USB_TD_TX_ER_NAK; + else if (td_status & TD_TO) + pkt->status = USB_TD_TX_ER_TIMEOUT; + else if (td_status & TD_UN) + pkt->status = USB_TD_TX_ER_UNDERUN; + else if (td_status & TD_STAL) + pkt->status = USB_TD_TX_ER_STALL; + else + fhci_err(usb->fhci, "illegal error occured\n"); + } else if ((extra_data & TD_TOK_IN) && + pkt->len > td_length - CRC_SIZE) { + pkt->status = USB_TD_RX_DATA_UNDERUN; + } + + if (extra_data & TD_TOK_IN) + pkt->len = td_length - CRC_SIZE; + else if (pkt->info & PKT_ZLP) + pkt->len = 0; + else + pkt->len = td_length; + + fhci_transaction_confirm(usb, pkt); + } +} + +/* + * Submitting a data frame to a specified endpoint of a USB device + * The frame is put in the driver's transmit queue for this endpoint + * + * Arguments: + * usb A pointer to the USB structure + * pkt A pointer to the user frame structure + * trans_type Transaction tyep - IN,OUT or SETUP + * dest_addr Device address - 0~127 + * dest_ep Endpoint number of the device - 0~16 + * trans_mode Pipe type - ISO,Interrupt,bulk or control + * dest_speed USB speed - Low speed or FULL speed + * data_toggle Data sequence toggle - 0 or 1 + */ +u32 fhci_host_transaction(struct fhci_usb *usb, + struct packet *pkt, + enum fhci_ta_type trans_type, + u8 dest_addr, + u8 dest_ep, + enum fhci_tf_mode trans_mode, + enum fhci_speed dest_speed, u8 data_toggle) +{ + struct endpoint *ep = usb->ep0; + struct usb_td __iomem *td; + u16 extra_data; + u16 td_status; + + fhci_usb_disable_interrupt(usb); + /* start from the next BD that should be filled */ + td = ep->empty_td; + td_status = in_be16(&td->status); + + if (td_status & TD_R && in_be16(&td->length)) { + /* if the TD is not free */ + fhci_usb_enable_interrupt(usb); + return -1; + } + + /* get the next TD in the ring */ + ep->empty_td = next_bd(ep->td_base, ep->empty_td, td_status); + fhci_usb_enable_interrupt(usb); + pkt->priv_data = td; + out_be32(&td->buf_ptr, virt_to_phys(pkt->data)); + /* sets up transaction parameters - addr,endp,dir,and type */ + extra_data = (dest_ep << TD_ENDP_SHIFT) | dest_addr; + switch (trans_type) { + case FHCI_TA_IN: + extra_data |= TD_TOK_IN; + break; + case FHCI_TA_OUT: + extra_data |= TD_TOK_OUT; + break; + case FHCI_TA_SETUP: + extra_data |= TD_TOK_SETUP; + break; + } + if (trans_mode == FHCI_TF_ISO) + extra_data |= TD_ISO; + out_be16(&td->extra, extra_data); + + /* sets up the buffer descriptor */ + td_status = ((td_status & TD_W) | TD_R | TD_L | TD_I | TD_CNF); + if (!(pkt->info & PKT_NO_CRC)) + td_status |= TD_TC; + + switch (trans_type) { + case FHCI_TA_IN: + if (data_toggle) + pkt->info |= PKT_PID_DATA1; + else + pkt->info |= PKT_PID_DATA0; + break; + default: + if (data_toggle) { + td_status |= TD_PID_DATA1; + pkt->info |= PKT_PID_DATA1; + } else { + td_status |= TD_PID_DATA0; + pkt->info |= PKT_PID_DATA0; + } + break; + } + + if ((dest_speed == FHCI_LOW_SPEED) && + (usb->port_status == FHCI_PORT_FULL)) + td_status |= TD_LSP; + + out_be16(&td->status, td_status); + + /* set up buffer length */ + if (trans_type == FHCI_TA_IN) + out_be16(&td->length, pkt->len + CRC_SIZE); + else + out_be16(&td->length, pkt->len); + + /* put the frame to the confirmation queue */ + cq_put(ep->conf_frame_Q, pkt); + + if (cq_howmany(ep->conf_frame_Q) == 1) + out_8(&usb->fhci->regs->usb_comm, USB_CMD_STR_FIFO); + + return 0; +} + +/* Reset the Tx BD ring */ +void fhci_flush_bds(struct fhci_usb *usb) +{ + u16 extra_data; + u16 td_status; + u32 buf; + struct usb_td __iomem *td; + struct endpoint *ep = usb->ep0; + + td = ep->td_base; + while (1) { + td_status = in_be16(&td->status); + buf = in_be32(&td->buf_ptr); + extra_data = in_be16(&td->extra); + + /* if the TD is not empty - we'll confirm it as Timeout */ + if (td_status & TD_R) + out_be16(&td->status, (td_status & ~TD_R) | TD_TO); + /* if this TD is dummy - let's skip this TD */ + else if (in_be32(&td->buf_ptr) == DUMMY_BD_BUFFER) + out_be32(&td->buf_ptr, DUMMY2_BD_BUFFER); + /* if this is the last TD - break */ + if (td_status & TD_W) + break; + + td++; + } + + fhci_td_transaction_confirm(usb); + + td = ep->td_base; + do { + out_be16(&td->status, 0); + out_be16(&td->length, 0); + out_be32(&td->buf_ptr, 0); + out_be16(&td->extra, 0); + td++; + } while (!(in_be16(&td->status) & TD_W)); + out_be16(&td->status, TD_W); /* for last TD set Wrap bit */ + out_be16(&td->length, 0); + out_be32(&td->buf_ptr, 0); + out_be16(&td->extra, 0); + + out_be16(&ep->ep_pram_ptr->tx_bd_ptr, + in_be16(&ep->ep_pram_ptr->tx_base)); + out_be32(&ep->ep_pram_ptr->tx_state, 0); + out_be16(&ep->ep_pram_ptr->tx_cnt, 0); + ep->empty_td = ep->td_base; + ep->conf_td = ep->td_base; +} + +/* + * Flush all transmitted packets from TDs in the actual frame. + * This routine is called when something wrong with the controller and + * we want to get rid of the actual frame and start again next frame + */ +void fhci_flush_actual_frame(struct fhci_usb *usb) +{ + u8 mode; + u16 tb_ptr; + u16 extra_data; + u16 td_status; + u32 buf_ptr; + struct usb_td __iomem *td; + struct endpoint *ep = usb->ep0; + + /* disable the USB controller */ + mode = in_8(&usb->fhci->regs->usb_mod); + out_8(&usb->fhci->regs->usb_mod, mode & ~USB_MODE_EN); + + tb_ptr = in_be16(&ep->ep_pram_ptr->tx_bd_ptr); + td = cpm_muram_addr(tb_ptr); + td_status = in_be16(&td->status); + buf_ptr = in_be32(&td->buf_ptr); + extra_data = in_be16(&td->extra); + do { + if (td_status & TD_R) { + out_be16(&td->status, (td_status & ~TD_R) | TD_TO); + } else { + out_be32(&td->buf_ptr, 0); + ep->already_pushed_dummy_bd = false; + break; + } + + /* advance the TD pointer */ + td = next_bd(ep->td_base, td, td_status); + td_status = in_be16(&td->status); + buf_ptr = in_be32(&td->buf_ptr); + extra_data = in_be16(&td->extra); + } while ((td_status & TD_R) || buf_ptr); + + fhci_td_transaction_confirm(usb); + + out_be16(&ep->ep_pram_ptr->tx_bd_ptr, + in_be16(&ep->ep_pram_ptr->tx_base)); + out_be32(&ep->ep_pram_ptr->tx_state, 0); + out_be16(&ep->ep_pram_ptr->tx_cnt, 0); + ep->empty_td = ep->td_base; + ep->conf_td = ep->td_base; + + usb->actual_frame->frame_status = FRAME_TIMER_END_TRANSMISSION; + + /* reset the event register */ + out_be16(&usb->fhci->regs->usb_event, 0xffff); + /* enable the USB controller */ + out_8(&usb->fhci->regs->usb_mod, mode | USB_MODE_EN); +} + +/* handles Tx confirm and Tx error interrupt */ +void fhci_tx_conf_interrupt(struct fhci_usb *usb) +{ + fhci_td_transaction_confirm(usb); + + /* + * Schedule another transaction to this frame only if we have + * already confirmed all transaction in the frame. + */ + if (((fhci_get_sof_timer_count(usb) < usb->max_frame_usage) || + (usb->actual_frame->frame_status & FRAME_END_TRANSMISSION)) && + (list_empty(&usb->actual_frame->tds_list))) + fhci_schedule_transactions(usb); +} + +void fhci_host_transmit_actual_frame(struct fhci_usb *usb) +{ + u16 tb_ptr; + u16 td_status; + struct usb_td __iomem *td; + struct endpoint *ep = usb->ep0; + + tb_ptr = in_be16(&ep->ep_pram_ptr->tx_bd_ptr); + td = cpm_muram_addr(tb_ptr); + + if (in_be32(&td->buf_ptr) == DUMMY_BD_BUFFER) { + struct usb_td __iomem *old_td = td; + + ep->already_pushed_dummy_bd = false; + td_status = in_be16(&td->status); + /* gets the next TD in the ring */ + td = next_bd(ep->td_base, td, td_status); + tb_ptr = cpm_muram_offset(td); + out_be16(&ep->ep_pram_ptr->tx_bd_ptr, tb_ptr); + + /* start transmit only if we have something in the TDs */ + if (in_be16(&td->status) & TD_R) + out_8(&usb->fhci->regs->usb_comm, USB_CMD_STR_FIFO); + + if (in_be32(&ep->conf_td->buf_ptr) == DUMMY_BD_BUFFER) { + out_be32(&old_td->buf_ptr, 0); + ep->conf_td = next_bd(ep->td_base, ep->conf_td, + td_status); + } else { + out_be32(&old_td->buf_ptr, DUMMY2_BD_BUFFER); + } + } +} diff --git a/drivers/usb/host/fhci.h b/drivers/usb/host/fhci.h new file mode 100644 index 0000000..7116284 --- /dev/null +++ b/drivers/usb/host/fhci.h @@ -0,0 +1,607 @@ +/* + * Freescale QUICC Engine USB Host Controller Driver + * + * Copyright (c) Freescale Semicondutor, Inc. 2006. + * Shlomi Gridish + * Jerry Huang + * Copyright (c) Logic Product Development, Inc. 2007 + * Peter Barada + * Copyright (c) MontaVista Software, Inc. 2008. + * Anton Vorontsov + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __FHCI_H +#define __FHCI_H + +#include +#include +#include +#include +#include +#include +#include +#include +#include "../core/hcd.h" + +#define USB_CLOCK 48000000 + +#define FHCI_PRAM_SIZE 0x100 + +#define MAX_EDS 32 +#define MAX_TDS 32 + + +/* CRC16 field size */ +#define CRC_SIZE 2 + +/* USB protocol overhead for each frame transmitted from the host */ +#define PROTOCOL_OVERHEAD 7 + +/* Packet structure, info field */ +#define PKT_PID_DATA0 0x80000000 /* PID - Data toggle zero */ +#define PKT_PID_DATA1 0x40000000 /* PID - Data toggle one */ +#define PKT_PID_SETUP 0x20000000 /* PID - Setup bit */ +#define PKT_SETUP_STATUS 0x10000000 /* Setup status bit */ +#define PKT_SETADDR_STATUS 0x08000000 /* Set address status bit */ +#define PKT_SET_HOST_LAST 0x04000000 /* Last data packet */ +#define PKT_HOST_DATA 0x02000000 /* Data packet */ +#define PKT_FIRST_IN_FRAME 0x01000000 /* First packet in the frame */ +#define PKT_TOKEN_FRAME 0x00800000 /* Token packet */ +#define PKT_ZLP 0x00400000 /* Zero length packet */ +#define PKT_IN_TOKEN_FRAME 0x00200000 /* IN token packet */ +#define PKT_OUT_TOKEN_FRAME 0x00100000 /* OUT token packet */ +#define PKT_SETUP_TOKEN_FRAME 0x00080000 /* SETUP token packet */ +#define PKT_STALL_FRAME 0x00040000 /* STALL packet */ +#define PKT_NACK_FRAME 0x00020000 /* NACK packet */ +#define PKT_NO_PID 0x00010000 /* No PID */ +#define PKT_NO_CRC 0x00008000 /* don't append CRC */ +#define PKT_HOST_COMMAND 0x00004000 /* Host command packet */ +#define PKT_DUMMY_PACKET 0x00002000 /* Dummy packet, used for mmm */ +#define PKT_LOW_SPEED_PACKET 0x00001000 /* Low-Speed packet */ + +#define TRANS_OK (0) +#define TRANS_INPROGRESS (-1) +#define TRANS_DISCARD (-2) +#define TRANS_FAIL (-3) + +#define PS_INT 0 +#define PS_DISCONNECTED 1 +#define PS_CONNECTED 2 +#define PS_READY 3 +#define PS_MISSING 4 + +/* Transfer Descriptor status field */ +#define USB_TD_OK 0x00000000 /* TD transmited or received ok */ +#define USB_TD_INPROGRESS 0x80000000 /* TD is being transmitted */ +#define USB_TD_RX_ER_NONOCT 0x40000000 /* Tx Non Octet Aligned Packet */ +#define USB_TD_RX_ER_BITSTUFF 0x20000000 /* Frame Aborted-Received pkt */ +#define USB_TD_RX_ER_CRC 0x10000000 /* CRC error */ +#define USB_TD_RX_ER_OVERUN 0x08000000 /* Over - run occured */ +#define USB_TD_RX_ER_PID 0x04000000 /* wrong PID received */ +#define USB_TD_RX_DATA_UNDERUN 0x02000000 /* shorter than expected */ +#define USB_TD_RX_DATA_OVERUN 0x01000000 /* longer than expected */ +#define USB_TD_TX_ER_NAK 0x00800000 /* NAK handshake */ +#define USB_TD_TX_ER_STALL 0x00400000 /* STALL handshake */ +#define USB_TD_TX_ER_TIMEOUT 0x00200000 /* transmit time out */ +#define USB_TD_TX_ER_UNDERUN 0x00100000 /* transmit underrun */ + +#define USB_TD_ERROR (USB_TD_RX_ER_NONOCT | USB_TD_RX_ER_BITSTUFF | \ + USB_TD_RX_ER_CRC | USB_TD_RX_ER_OVERUN | USB_TD_RX_ER_PID | \ + USB_TD_RX_DATA_UNDERUN | USB_TD_RX_DATA_OVERUN | \ + USB_TD_TX_ER_NAK | USB_TD_TX_ER_STALL | \ + USB_TD_TX_ER_TIMEOUT | USB_TD_TX_ER_UNDERUN) + +/* Transfer Descriptor toggle field */ +#define USB_TD_TOGGLE_DATA0 0 +#define USB_TD_TOGGLE_DATA1 1 +#define USB_TD_TOGGLE_CARRY 2 + +/* #define MULTI_DATA_BUS */ + +/* Bus mode register RBMR/TBMR */ +#define BUS_MODE_GBL 0x20 /* Global snooping */ +#define BUS_MODE_BO 0x18 /* Byte ordering */ +#define BUS_MODE_BO_BE 0x10 /* Byte ordering - Big-endian */ +#define BUS_MODE_DTB 0x02 /* Data bus */ + +/* FHCI QE USB Register Description */ + +/* USB Mode Register bit define */ +#define USB_MODE_EN 0x01 +#define USB_MODE_HOST 0x02 +#define USB_MODE_TEST 0x04 +#define USB_MODE_SFTE 0x08 +#define USB_MODE_RESUME 0x40 +#define USB_MODE_LSS 0x80 + +/* USB Slave Address Register Mask */ +#define USB_SLVADDR_MASK 0x7F + +/* USB Endpoint register define */ +#define USB_EPNUM_MASK 0xF000 +#define USB_EPNUM_SHIFT 12 + +#define USB_TRANS_MODE_SHIFT 8 +#define USB_TRANS_CTR 0x0000 +#define USB_TRANS_INT 0x0100 +#define USB_TRANS_BULK 0x0200 +#define USB_TRANS_ISO 0x0300 + +#define USB_EP_MF 0x0020 +#define USB_EP_RTE 0x0010 + +#define USB_THS_SHIFT 2 +#define USB_THS_MASK 0x000c +#define USB_THS_NORMAL 0x0 +#define USB_THS_IGNORE_IN 0x0004 +#define USB_THS_NACK 0x0008 +#define USB_THS_STALL 0x000c + +#define USB_RHS_SHIFT 0 +#define USB_RHS_MASK 0x0003 +#define USB_RHS_NORMAL 0x0 +#define USB_RHS_IGNORE_OUT 0x0001 +#define USB_RHS_NACK 0x0002 +#define USB_RHS_STALL 0x0003 + +#define USB_RTHS_MASK 0x000f + +/* USB Command Register define */ +#define USB_CMD_STR_FIFO 0x80 +#define USB_CMD_FLUSH_FIFO 0x40 +#define USB_CMD_ISFT 0x20 +#define USB_CMD_DSFT 0x10 +#define USB_CMD_EP_MASK 0x03 + +/* USB Event and Mask Register define */ +#define USB_E_MSF_MASK 0x0800 +#define USB_E_SFT_MASK 0x0400 +#define USB_E_RESET_MASK 0x0200 +#define USB_E_IDLE_MASK 0x0100 +#define USB_E_TXE4_MASK 0x0080 +#define USB_E_TXE3_MASK 0x0040 +#define USB_E_TXE2_MASK 0x0020 +#define USB_E_TXE1_MASK 0x0010 +#define USB_E_SOF_MASK 0x0008 +#define USB_E_BSY_MASK 0x0004 +#define USB_E_TXB_MASK 0x0002 +#define USB_E_RXB_MASK 0x0001 + +/* Freescale USB Host controller registers */ +struct fhci_regs { + u8 usb_mod; /* mode register */ + u8 usb_addr; /* address register */ + u8 usb_comm; /* command register */ + u8 reserved1[1]; + __be16 usb_ep[4]; /* endpoint register */ + u8 reserved2[4]; + __be16 usb_event; /* event register */ + u8 reserved3[2]; + __be16 usb_mask; /* mask register */ + u8 reserved4[1]; + u8 usb_status; /* status register */ + __be16 usb_sof_tmr; /* Start Of Frame timer */ + u8 reserved5[2]; + __be16 usb_frame_num; /* frame number register */ + u8 reserved6[1]; +}; + +/* Freescale USB HOST */ +struct fhci_pram { + __be16 ep_ptr[4]; /* Endpoint porter reg */ + __be32 rx_state; /* Rx internal state */ + __be32 rx_ptr; /* Rx internal data pointer */ + __be16 frame_num; /* Frame number */ + __be16 rx_cnt; /* Rx byte count */ + __be32 rx_temp; /* Rx temp */ + __be32 rx_data_temp; /* Rx data temp */ + __be16 rx_u_ptr; /* Rx microcode return address temp */ + u8 reserved1[2]; /* reserved area */ + __be32 sof_tbl; /* SOF lookup table pointer */ + u8 sof_u_crc_temp; /* SOF micorcode CRC5 temp reg */ + u8 reserved2[0xdb]; +}; + +/* Freescale USB Endpoint*/ +struct fhci_ep_pram { + __be16 rx_base; /* Rx BD base address */ + __be16 tx_base; /* Tx BD base address */ + u8 rx_func_code; /* Rx function code */ + u8 tx_func_code; /* Tx function code */ + __be16 rx_buff_len; /* Rx buffer length */ + __be16 rx_bd_ptr; /* Rx BD pointer */ + __be16 tx_bd_ptr; /* Tx BD pointer */ + __be32 tx_state; /* Tx internal state */ + __be32 tx_ptr; /* Tx internal data pointer */ + __be16 tx_crc; /* temp transmit CRC */ + __be16 tx_cnt; /* Tx byte count */ + __be32 tx_temp; /* Tx temp */ + __be16 tx_u_ptr; /* Tx microcode return address temp */ + __be16 reserved; +}; + +struct fhci_controller_list { + struct list_head ctrl_list; /* control endpoints */ + struct list_head bulk_list; /* bulk endpoints */ + struct list_head iso_list; /* isochronous endpoints */ + struct list_head intr_list; /* interruput endpoints */ + struct list_head done_list; /* done transfers */ +}; + +struct virtual_root_hub { + int dev_num; /* USB address of the root hub */ + u32 feature; /* indicates what feature has been set */ + struct usb_hub_status hub; + struct usb_port_status port; +}; + +enum fhci_gpios { + GPIO_USBOE = 0, + GPIO_USBTP, + GPIO_USBTN, + GPIO_USBRP, + GPIO_USBRN, + /* these are optional */ + GPIO_SPEED, + GPIO_POWER, + NUM_GPIOS, +}; + +enum fhci_pins { + PIN_USBOE = 0, + PIN_USBTP, + PIN_USBTN, + NUM_PINS, +}; + +struct fhci_hcd { + enum qe_clock fullspeed_clk; + enum qe_clock lowspeed_clk; + struct qe_pin *pins[NUM_PINS]; + int gpios[NUM_GPIOS]; + bool alow_gpios[NUM_GPIOS]; + + struct fhci_regs __iomem *regs; /* I/O memory used to communicate */ + struct fhci_pram __iomem *pram; /* Parameter RAM */ + struct gtm_timer *timer; + + spinlock_t lock; + struct fhci_usb *usb_lld; /* Low-level driver */ + struct virtual_root_hub *vroot_hub; /* the virtual root hub */ + int active_urbs; + struct fhci_controller_list *hc_list; + struct tasklet_struct *process_done_task; /* tasklet for done list */ + + struct list_head empty_eds; + struct list_head empty_tds; + +#ifdef CONFIG_FHCI_DEBUG + int usb_irq_stat[13]; + struct dentry *dfs_root; + struct dentry *dfs_regs; + struct dentry *dfs_irq_stat; +#endif +}; + +#define USB_FRAME_USAGE 90 +#define FRAME_TIME_USAGE (USB_FRAME_USAGE*10) /* frame time usage */ +#define SW_FIX_TIME_BETWEEN_TRANSACTION 150 /* SW */ +#define MAX_BYTES_PER_FRAME (USB_FRAME_USAGE*15) +#define MAX_PERIODIC_FRAME_USAGE 90 + +/* transaction type */ +enum fhci_ta_type { + FHCI_TA_IN = 0, /* input transaction */ + FHCI_TA_OUT, /* output transaction */ + FHCI_TA_SETUP, /* setup transaction */ +}; + +/* transfer mode */ +enum fhci_tf_mode { + FHCI_TF_CTRL = 0, + FHCI_TF_ISO, + FHCI_TF_BULK, + FHCI_TF_INTR, +}; + +enum fhci_speed { + FHCI_FULL_SPEED, + FHCI_LOW_SPEED, +}; + +/* endpoint state */ +enum fhci_ed_state { + FHCI_ED_NEW = 0, /* pipe is new */ + FHCI_ED_OPER, /* pipe is operating */ + FHCI_ED_URB_DEL, /* pipe is in hold because urb is being deleted */ + FHCI_ED_SKIP, /* skip this pipe */ + FHCI_ED_HALTED, /* pipe is halted */ +}; + +enum fhci_port_status { + FHCI_PORT_POWER_OFF = 0, + FHCI_PORT_DISABLED, + FHCI_PORT_DISCONNECTING, + FHCI_PORT_WAITING, /* waiting for connection */ + FHCI_PORT_FULL, /* full speed connected */ + FHCI_PORT_LOW, /* low speed connected */ +}; + +enum fhci_mem_alloc { + MEM_CACHABLE_SYS = 0x00000001, /* primary DDR,cachable */ + MEM_NOCACHE_SYS = 0x00000004, /* primary DDR,non-cachable */ + MEM_SECONDARY = 0x00000002, /* either secondary DDR or SDRAM */ + MEM_PRAM = 0x00000008, /* multi-user RAM identifier */ +}; + +/* USB default parameters*/ +#define DEFAULT_RING_LEN 8 +#define DEFAULT_DATA_MEM MEM_CACHABLE_SYS + +struct ed { + u8 dev_addr; /* device address */ + u8 ep_addr; /* endpoint address */ + enum fhci_tf_mode mode; /* USB transfer mode */ + enum fhci_speed speed; + unsigned int max_pkt_size; + enum fhci_ed_state state; + struct list_head td_list; /* a list of all queued TD to this pipe */ + struct list_head node; + + /* read only parameters, should be cleared upon initialization */ + u8 toggle_carry; /* toggle carry from the last TD submitted */ + u32 last_iso; /* time stamp of last queued ISO transfer */ + struct td *td_head; /* a pointer to the current TD handled */ +}; + +struct td { + void *data; /* a pointer to the data buffer */ + unsigned int len; /* length of the data to be submitted */ + unsigned int actual_len; /* actual bytes transfered on this td */ + enum fhci_ta_type type; /* transaction type */ + u8 toggle; /* toggle for next trans. within this TD */ + u16 iso_index; /* ISO transaction index */ + u16 start_frame; /* start frame time stamp */ + u16 interval; /* interval between trans. (for ISO/Intr) */ + u32 status; /* status of the TD */ + struct ed *ed; /* a handle to the corresponding ED */ + struct urb *urb; /* a handle to the corresponding URB */ + bool ioc; /* Inform On Completion */ + struct list_head node; + + /* read only parameters should be cleared upon initialization */ + struct packet *pkt; + int nak_cnt; + int error_cnt; + struct list_head frame_lh; +}; + +struct packet { + u8 *data; /* packet data */ + u32 len; /* packet length */ + u32 status; /* status of the packet - equivalent to the status + * field for the corresponding structure td */ + u32 info; /* packet information */ + void __iomem *priv_data; /* private data of the driver (TDs or BDs) */ +}; + +/* struct for each URB */ +#define URB_INPROGRESS 0 +#define URB_DEL 1 + +/* URB states (state field) */ +#define US_BULK 0 +#define US_BULK0 1 + +/* three setup states */ +#define US_CTRL_SETUP 2 +#define US_CTRL_DATA 1 +#define US_CTRL_ACK 0 + +#define EP_ZERO 0 + +struct urb_priv { + int num_of_tds; + int tds_cnt; + int state; + + struct td **tds; + struct ed *ed; + struct timer_list time_out; +}; + +struct endpoint { + /* Pointer to ep parameter RAM */ + struct fhci_ep_pram __iomem *ep_pram_ptr; + + /* Host transactions */ + struct usb_td __iomem *td_base; /* first TD in the ring */ + struct usb_td __iomem *conf_td; /* next TD for confirm after transac */ + struct usb_td __iomem *empty_td;/* next TD for new transaction req. */ + struct kfifo *empty_frame_Q; /* Empty frames list to use */ + struct kfifo *conf_frame_Q; /* frames passed to TDs,waiting for tx */ + struct kfifo *dummy_packets_Q;/* dummy packets for the CRC overun */ + + bool already_pushed_dummy_bd; +}; + +/* struct for each 1mSec frame time */ +#define FRAME_IS_TRANSMITTED 0x00 +#define FRAME_TIMER_END_TRANSMISSION 0x01 +#define FRAME_DATA_END_TRANSMISSION 0x02 +#define FRAME_END_TRANSMISSION 0x03 +#define FRAME_IS_PREPARED 0x04 + +struct fhci_time_frame { + u16 frame_num; /* frame number */ + u16 total_bytes; /* total bytes submitted within this frame */ + u8 frame_status; /* flag that indicates to stop fill this frame */ + struct list_head tds_list; /* all tds of this frame */ +}; + +/* internal driver structure*/ +struct fhci_usb { + u16 saved_msk; /* saving of the USB mask register */ + struct endpoint *ep0; /* pointer for endpoint0 structure */ + int intr_nesting_cnt; /* interrupt nesting counter */ + u16 max_frame_usage; /* max frame time usage,in micro-sec */ + u16 max_bytes_per_frame; /* max byte can be tx in one time frame */ + u32 sw_transaction_time; /* sw complete trans time,in micro-sec */ + struct fhci_time_frame *actual_frame; + struct fhci_controller_list *hc_list; /* main structure for hc */ + struct virtual_root_hub *vroot_hub; + enum fhci_port_status port_status; /* v_rh port status */ + + u32 (*transfer_confirm)(struct fhci_hcd *fhci); + + struct fhci_hcd *fhci; +}; + +/* + * Various helpers and prototypes below. + */ + +static inline u16 get_frame_num(struct fhci_hcd *fhci) +{ + return in_be16(&fhci->pram->frame_num) & 0x07ff; +} + +#define fhci_dbg(fhci, fmt, args...) \ + dev_dbg(fhci_to_hcd(fhci)->self.controller, fmt, ##args) +#define fhci_vdbg(fhci, fmt, args...) \ + dev_vdbg(fhci_to_hcd(fhci)->self.controller, fmt, ##args) +#define fhci_err(fhci, fmt, args...) \ + dev_err(fhci_to_hcd(fhci)->self.controller, fmt, ##args) +#define fhci_info(fhci, fmt, args...) \ + dev_info(fhci_to_hcd(fhci)->self.controller, fmt, ##args) +#define fhci_warn(fhci, fmt, args...) \ + dev_warn(fhci_to_hcd(fhci)->self.controller, fmt, ##args) + +static inline struct fhci_hcd *hcd_to_fhci(struct usb_hcd *hcd) +{ + return (struct fhci_hcd *)hcd->hcd_priv; +} + +static inline struct usb_hcd *fhci_to_hcd(struct fhci_hcd *fhci) +{ + return container_of((void *)fhci, struct usb_hcd, hcd_priv); +} + +/* fifo of pointers */ +static inline struct kfifo *cq_new(int size) +{ + return kfifo_alloc(size * sizeof(void *), GFP_KERNEL, NULL); +} + +static inline void cq_delete(struct kfifo *kfifo) +{ + kfifo_free(kfifo); +} + +static inline unsigned int cq_howmany(struct kfifo *kfifo) +{ + return __kfifo_len(kfifo) / sizeof(void *); +} + +static inline int cq_put(struct kfifo *kfifo, void *p) +{ + return __kfifo_put(kfifo, (void *)&p, sizeof(p)); +} + +static inline void *cq_get(struct kfifo *kfifo) +{ + void *p = NULL; + + __kfifo_get(kfifo, (void *)&p, sizeof(p)); + return p; +} + +/* fhci-hcd.c */ +void fhci_start_sof_timer(struct fhci_hcd *fhci); +void fhci_stop_sof_timer(struct fhci_hcd *fhci); +u16 fhci_get_sof_timer_count(struct fhci_usb *usb); +void fhci_usb_enable_interrupt(struct fhci_usb *usb); +void fhci_usb_disable_interrupt(struct fhci_usb *usb); +int fhci_ioports_check_bus_state(struct fhci_hcd *fhci); + +/* fhci-mem.c */ +void fhci_recycle_empty_td(struct fhci_hcd *fhci, struct td *td); +void fhci_recycle_empty_ed(struct fhci_hcd *fhci, struct ed *ed); +struct ed *fhci_get_empty_ed(struct fhci_hcd *fhci); +struct td *fhci_td_fill(struct fhci_hcd *fhci, struct urb *urb, + struct urb_priv *urb_priv, struct ed *ed, u16 index, + enum fhci_ta_type type, int toggle, u8 *data, u32 len, + u16 interval, u16 start_frame, bool ioc); +void fhci_add_tds_to_ed(struct ed *ed, struct td **td_list, int number); + +/* fhci-hub.c */ +void fhci_config_transceiver(struct fhci_hcd *fhci, + enum fhci_port_status status); +void fhci_port_disable(struct fhci_hcd *fhci); +void fhci_port_enable(void *lld); +void fhci_io_port_generate_reset(struct fhci_hcd *fhci); +void fhci_port_reset(void *lld); +int fhci_hub_status_data(struct usb_hcd *hcd, char *buf); +int fhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, + u16 wIndex, char *buf, u16 wLength); + +/* fhci-tds.c */ +void fhci_flush_bds(struct fhci_usb *usb); +void fhci_flush_actual_frame(struct fhci_usb *usb); +u32 fhci_host_transaction(struct fhci_usb *usb, struct packet *pkt, + enum fhci_ta_type trans_type, u8 dest_addr, + u8 dest_ep, enum fhci_tf_mode trans_mode, + enum fhci_speed dest_speed, u8 data_toggle); +void fhci_host_transmit_actual_frame(struct fhci_usb *usb); +void fhci_tx_conf_interrupt(struct fhci_usb *usb); +void fhci_push_dummy_bd(struct endpoint *ep); +u32 fhci_create_ep(struct fhci_usb *usb, enum fhci_mem_alloc data_mem, + u32 ring_len); +void fhci_init_ep_registers(struct fhci_usb *usb, + struct endpoint *ep, + enum fhci_mem_alloc data_mem); +void fhci_ep0_free(struct fhci_usb *usb); + +/* fhci-sched.c */ +extern struct tasklet_struct fhci_tasklet; +void fhci_transaction_confirm(struct fhci_usb *usb, struct packet *pkt); +void fhci_flush_all_transmissions(struct fhci_usb *usb); +void fhci_schedule_transactions(struct fhci_usb *usb); +void fhci_device_connected_interrupt(struct fhci_hcd *fhci); +void fhci_device_disconnected_interrupt(struct fhci_hcd *fhci); +void fhci_queue_urb(struct fhci_hcd *fhci, struct urb *urb); +u32 fhci_transfer_confirm_callback(struct fhci_hcd *fhci); +irqreturn_t fhci_irq(struct usb_hcd *hcd); +irqreturn_t fhci_frame_limit_timer_irq(int irq, void *_hcd); + +/* fhci-q.h */ +void fhci_urb_complete_free(struct fhci_hcd *fhci, struct urb *urb); +struct td *fhci_remove_td_from_ed(struct ed *ed); +struct td *fhci_remove_td_from_frame(struct fhci_time_frame *frame); +void fhci_move_td_from_ed_to_done_list(struct fhci_usb *usb, struct ed *ed); +struct td *fhci_peek_td_from_frame(struct fhci_time_frame *frame); +void fhci_add_td_to_frame(struct fhci_time_frame *frame, struct td *td); +struct td *fhci_remove_td_from_done_list(struct fhci_controller_list *p_list); +void fhci_done_td(struct urb *urb, struct td *td); +void fhci_del_ed_list(struct fhci_hcd *fhci, struct ed *ed); + +#ifdef CONFIG_FHCI_DEBUG + +void fhci_dbg_isr(struct fhci_hcd *fhci, int usb_er); +void fhci_dfs_destroy(struct fhci_hcd *fhci); +void fhci_dfs_create(struct fhci_hcd *fhci); + +#else + +static inline void fhci_dbg_isr(struct fhci_hcd *fhci, int usb_er) {} +static inline void fhci_dfs_destroy(struct fhci_hcd *fhci) {} +static inline void fhci_dfs_create(struct fhci_hcd *fhci) {} + +#endif /* CONFIG_FHCI_DEBUG */ + +#endif /* __FHCI_H */ -- cgit v1.1 From 94f341db3dd080851f918da37e84659ef760da26 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 25 Dec 2008 17:15:02 +0300 Subject: USB: fsl_qe_udc: Fix oops on QE UDC probe failure In case of probing errors the driver kfrees the udc_controller, but it doesn't set the pointer to NULL. When usb_gadget_register_driver is called, it checks for udc_controller != NULL, the check passes and the driver accesses nonexistent memory. Fix this by setting udc_controller to NULL in case of errors. While at it, also implement irq_of_parse_and_map()'s failure and cleanup cases. Signed-off-by: Anton Vorontsov Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/fsl_qe_udc.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c index d6c5bcd..e8f7862 100644 --- a/drivers/usb/gadget/fsl_qe_udc.c +++ b/drivers/usb/gadget/fsl_qe_udc.c @@ -2604,6 +2604,10 @@ static int __devinit qe_udc_probe(struct of_device *ofdev, (unsigned long)udc_controller); /* request irq and disable DR */ udc_controller->usb_irq = irq_of_parse_and_map(np, 0); + if (!udc_controller->usb_irq) { + ret = -EINVAL; + goto err_noirq; + } ret = request_irq(udc_controller->usb_irq, qe_udc_irq, 0, driver_name, udc_controller); @@ -2625,6 +2629,8 @@ static int __devinit qe_udc_probe(struct of_device *ofdev, err6: free_irq(udc_controller->usb_irq, udc_controller); err5: + irq_dispose_mapping(udc_controller->usb_irq); +err_noirq: if (udc_controller->nullmap) { dma_unmap_single(udc_controller->gadget.dev.parent, udc_controller->nullp, 256, @@ -2648,7 +2654,7 @@ err2: iounmap(udc_controller->usb_regs); err1: kfree(udc_controller); - + udc_controller = NULL; return ret; } @@ -2710,6 +2716,7 @@ static int __devexit qe_udc_remove(struct of_device *ofdev) kfree(ep->txframe); free_irq(udc_controller->usb_irq, udc_controller); + irq_dispose_mapping(udc_controller->usb_irq); tasklet_kill(&udc_controller->rx_tasklet); -- cgit v1.1 From a30551db66afa1b53a4fa7ceadddb7122bdcf491 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 25 Dec 2008 17:15:05 +0300 Subject: USB: fsl_qe_udc: Fix recursive locking bug in ch9getstatus() The call chain is this: qe_udc_irq() <- grabs the udc->lock spinlock rx_irq() qe_ep0_rx() ep0_setup_handle() setup_received_handle() ch9getstatus() qe_ep_queue() <- tries to grab the udc->lock again It seems unsafe to temporarily drop the lock in the ch9getstatus(), so to fix that bug the lock-less __qe_ep_queue() function implemented and used by the ch9getstatus(). Signed-off-by: Anton Vorontsov Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/fsl_qe_udc.c | 26 ++++++++++++++++++-------- 1 file changed, 18 insertions(+), 8 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c index e8f7862..064582f 100644 --- a/drivers/usb/gadget/fsl_qe_udc.c +++ b/drivers/usb/gadget/fsl_qe_udc.c @@ -1681,14 +1681,11 @@ static void qe_free_request(struct usb_ep *_ep, struct usb_request *_req) kfree(req); } -/* queues (submits) an I/O request to an endpoint */ -static int qe_ep_queue(struct usb_ep *_ep, struct usb_request *_req, - gfp_t gfp_flags) +static int __qe_ep_queue(struct usb_ep *_ep, struct usb_request *_req) { struct qe_ep *ep = container_of(_ep, struct qe_ep, ep); struct qe_req *req = container_of(_req, struct qe_req, req); struct qe_udc *udc; - unsigned long flags; int reval; udc = ep->udc; @@ -1732,7 +1729,7 @@ static int qe_ep_queue(struct usb_ep *_ep, struct usb_request *_req, list_add_tail(&req->queue, &ep->queue); dev_vdbg(udc->dev, "gadget have request in %s! %d\n", ep->name, req->req.length); - spin_lock_irqsave(&udc->lock, flags); + /* push the request to device */ if (ep_is_in(ep)) reval = ep_req_send(ep, req); @@ -1748,11 +1745,24 @@ static int qe_ep_queue(struct usb_ep *_ep, struct usb_request *_req, if (ep->dir == USB_DIR_OUT) reval = ep_req_receive(ep, req); - spin_unlock_irqrestore(&udc->lock, flags); - return 0; } +/* queues (submits) an I/O request to an endpoint */ +static int qe_ep_queue(struct usb_ep *_ep, struct usb_request *_req, + gfp_t gfp_flags) +{ + struct qe_ep *ep = container_of(_ep, struct qe_ep, ep); + struct qe_udc *udc = ep->udc; + unsigned long flags; + int ret; + + spin_lock_irqsave(&udc->lock, flags); + ret = __qe_ep_queue(_ep, _req); + spin_unlock_irqrestore(&udc->lock, flags); + return ret; +} + /* dequeues (cancels, unlinks) an I/O request from an endpoint */ static int qe_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) { @@ -2008,7 +2018,7 @@ static void ch9getstatus(struct qe_udc *udc, u8 request_type, u16 value, udc->ep0_dir = USB_DIR_IN; /* data phase */ - status = qe_ep_queue(&ep->ep, &req->req, GFP_ATOMIC); + status = __qe_ep_queue(&ep->ep, &req->req); if (status == 0) return; -- cgit v1.1 From 2247818a329687f30d1e5c3a62efc33d07c47522 Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 25 Dec 2008 17:15:07 +0300 Subject: USB: fsl_qe_udc: Fix QE USB controller initialization qe_udc_reg_init() leaves the USB controller enabled before muram memory initialized. Sometimes the uninitialized muram memory confuses the controller, and it start sending the busy interrupts. Fix this by disabling the controller, it will be enabled later by the gadget driver, at bind time. Signed-off-by: Anton Vorontsov Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/fsl_qe_udc.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c index 064582f..1319f8f 100644 --- a/drivers/usb/gadget/fsl_qe_udc.c +++ b/drivers/usb/gadget/fsl_qe_udc.c @@ -2452,8 +2452,12 @@ static int __devinit qe_udc_reg_init(struct qe_udc *udc) struct usb_ctlr __iomem *qe_usbregs; qe_usbregs = udc->usb_regs; - /* Init the usb register */ + /* Spec says that we must enable the USB controller to change mode. */ out_8(&qe_usbregs->usb_usmod, 0x01); + /* Mode changed, now disable it, since muram isn't initialized yet. */ + out_8(&qe_usbregs->usb_usmod, 0x00); + + /* Initialize the rest. */ out_be16(&qe_usbregs->usb_usbmr, 0); out_8(&qe_usbregs->usb_uscom, 0); out_be16(&qe_usbregs->usb_usber, USBER_ALL_CLEAR); -- cgit v1.1 From ef84e4055f3561495c4c0e0dfb0b9f4a6e20479d Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 25 Dec 2008 17:15:09 +0300 Subject: USB: fsl_qe_udc: Fix disconnects reporting during bus reset Freescale QE UDC controllers can't report the "port change" states, so the only way to handle disconnects is to process bus reset interrupts. The bus reset can take some time, that is, few irqs. Gadgets may print the disconnection events, and this causes few repetitive messages in the kernel log. This patch fixes the issue by using the usb_state machine, if the usb controller has been already reset, just quit the reset irq early. Signed-off-by: Anton Vorontsov Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/fsl_qe_udc.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c index 1319f8f..7a820a3 100644 --- a/drivers/usb/gadget/fsl_qe_udc.c +++ b/drivers/usb/gadget/fsl_qe_udc.c @@ -2161,6 +2161,9 @@ static int reset_irq(struct qe_udc *udc) { unsigned char i; + if (udc->usb_state == USB_STATE_DEFAULT) + return 0; + qe_usb_disable(); out_8(&udc->usb_regs->usb_usadr, 0); -- cgit v1.1 From 82341b3690fce8f70998e3cfb79fbffff0eb7e6b Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 25 Dec 2008 17:15:11 +0300 Subject: USB: fsl_qe_udc: Fix muram corruption by disabled endpoints Before freeing an endpoint's muram memory, we should stop all activity of the endpoint, otherwise the QE UDC controller might do nasty things with the muram memory that isn't belong to that endpoint anymore. The qe_ep_reset() effectively flushes the hardware fifos, finishes all late transaction and thus prevents the corruption. Signed-off-by: Anton Vorontsov Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/fsl_qe_udc.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c index 7a820a3..32f415e 100644 --- a/drivers/usb/gadget/fsl_qe_udc.c +++ b/drivers/usb/gadget/fsl_qe_udc.c @@ -1622,6 +1622,7 @@ static int qe_ep_disable(struct usb_ep *_ep) nuke(ep, -ESHUTDOWN); ep->desc = NULL; ep->stopped = 1; + qe_ep_reset(udc, ep->epnum); spin_unlock_irqrestore(&udc->lock, flags); cpm_muram_free(cpm_muram_offset(ep->rxbase)); -- cgit v1.1 From af3ddbd76304f9f602c970f9b09a0c9d8cf8336c Mon Sep 17 00:00:00 2001 From: Anton Vorontsov Date: Thu, 25 Dec 2008 17:15:14 +0300 Subject: USB: fsl_qe_udc: Fix stalled TX requests bug While disabling an endpoint the driver nuking any pending requests, thus completing them with -ESHUTDOWN status. But the driver doesn't clear the tx_req, which means that a next TX request (after ep_enable), might get stalled, since the driver won't queue the new reqests. This patch fixes a bug I'm observing with ethernet gadget while playing with ifconfig usb0 up/down (the up/down sequence disables and enables `in' and `out' endpoints). Signed-off-by: Anton Vorontsov Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/fsl_qe_udc.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/fsl_qe_udc.c b/drivers/usb/gadget/fsl_qe_udc.c index 32f415e..d701bf4 100644 --- a/drivers/usb/gadget/fsl_qe_udc.c +++ b/drivers/usb/gadget/fsl_qe_udc.c @@ -1622,6 +1622,7 @@ static int qe_ep_disable(struct usb_ep *_ep) nuke(ep, -ESHUTDOWN); ep->desc = NULL; ep->stopped = 1; + ep->tx_req = NULL; qe_ep_reset(udc, ep->epnum); spin_unlock_irqrestore(&udc->lock, flags); -- cgit v1.1 From 2057ac86da09955c9f8671e36d4f6bd1e7a5d7d2 Mon Sep 17 00:00:00 2001 From: James Treacy Date: Thu, 29 Jan 2009 20:17:17 -0500 Subject: USB: cdc-acm.c: remove duplicate lines for MTK gps support The same patch to add support for MTK gps loggers was submitted by two different people and applied twice. Remove the redundant lines. Signed-off-by: James Treacy Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 3 --- 1 file changed, 3 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 97ba4a9..326dd7f 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1349,9 +1349,6 @@ static struct usb_device_id acm_ids[] = { { USB_DEVICE(0x0e8d, 0x0003), /* FIREFLY, MediaTek Inc; andrey.arapov@gmail.com */ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ }, - { USB_DEVICE(0x0e8d, 0x3329), /* i-blue 747, Qstarz BT-Q1000, Holux M-241 */ - .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ - }, { USB_DEVICE(0x0e8d, 0x3329), /* MediaTek Inc GPS */ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ }, -- cgit v1.1 From 6b40c0057a7935bcf63a38a924094c7e61d4731f Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 3 Feb 2009 16:02:21 -0800 Subject: Revert USB: option: add Pantech cards Revert 8b6346ec899713a90890c9e832f7eff91ea73504 as these devices really work just fine with the cdc-acm driver, as they follow the spec properly. Thanks to Chuck Ebbert for pointing out the problem here. Cc: Chuck Ebbert Cc: Dan Williams Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 9 --------- 1 file changed, 9 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 6c89da9..9d2e77d 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -274,12 +274,6 @@ static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *po #define ERICSSON_VENDOR_ID 0x0bdb #define ERICSSON_PRODUCT_F3507G 0x1900 -/* Pantech products */ -#define PANTECH_VENDOR_ID 0x106c -#define PANTECH_PRODUCT_PC5740 0x3701 -#define PANTECH_PRODUCT_PC5750 0x3702 /* PX-500 */ -#define PANTECH_PRODUCT_UM150 0x3711 - static struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) }, @@ -488,9 +482,6 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) }, { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) }, { USB_DEVICE(ERICSSON_VENDOR_ID, ERICSSON_PRODUCT_F3507G) }, - { USB_DEVICE(PANTECH_VENDOR_ID, PANTECH_PRODUCT_PC5740) }, - { USB_DEVICE(PANTECH_VENDOR_ID, PANTECH_PRODUCT_PC5750) }, - { USB_DEVICE(PANTECH_VENDOR_ID, PANTECH_PRODUCT_UM150) }, { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); -- cgit v1.1 From 0d020aae0a154cffce680a7775c74788fa0bea92 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 2 Feb 2009 09:51:01 -0500 Subject: USB: usb-storage: remove WARN from last-sector hacks This patch (as1201) removes the WARN() from the last-sector hacks in usb-storage, thereby making the code match the version now in .27-stable and .28-stable. The WARN() isn't needed, since there is no longer any intention of assuming that all storage devices have an even number of sectors, and it annoys users for no good reason. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/transport.c | 36 +++--------------------------------- 1 file changed, 3 insertions(+), 33 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c index 1d5438e..fb65d221 100644 --- a/drivers/usb/storage/transport.c +++ b/drivers/usb/storage/transport.c @@ -558,32 +558,10 @@ static void last_sector_hacks(struct us_data *us, struct scsi_cmnd *srb) if (srb->result == SAM_STAT_GOOD && scsi_get_resid(srb) == 0) { - /* The command succeeded. If the capacity is odd - * (i.e., if the sector number is even) then the - * "always-even" heuristic would be wrong for this - * device. Issue a WARN() so that the kerneloops.org - * project will be notified and we will then know to - * mark the device with a CAPACITY_OK flag. Hopefully - * this will occur for only a few devices. - * - * Use the sign of us->last_sector_hacks to tell whether - * the warning has already been issued; we don't need - * more than one warning per device. + /* The command succeeded. We know this device doesn't + * have the last-sector bug, so stop checking it. */ - if (!(sector & 1) && us->use_last_sector_hacks > 0) { - unsigned vid = le16_to_cpu( - us->pusb_dev->descriptor.idVendor); - unsigned pid = le16_to_cpu( - us->pusb_dev->descriptor.idProduct); - unsigned rev = le16_to_cpu( - us->pusb_dev->descriptor.bcdDevice); - - WARN(1, "%s: Successful last sector success at %u, " - "device %04x:%04x:%04x\n", - sdkp->disk->disk_name, sector, - vid, pid, rev); - us->use_last_sector_hacks = -1; - } + us->use_last_sector_hacks = 0; } else { /* The command failed. Allow up to 3 retries in case this @@ -599,14 +577,6 @@ static void last_sector_hacks(struct us_data *us, struct scsi_cmnd *srb) srb->result = SAM_STAT_CHECK_CONDITION; memcpy(srb->sense_buffer, record_not_found, sizeof(record_not_found)); - - /* In theory we might want to issue a WARN() here if the - * capacity is even, since it could indicate the device - * has the READ CAPACITY bug _and_ the real capacity is - * odd. But it could also indicate that the device - * simply can't access its last sector, a failure mode - * which is surprisingly common. So no warning. - */ } done: -- cgit v1.1 From 78c8fb3717cdff35ad118e17ac7495d0cf21a61f Mon Sep 17 00:00:00 2001 From: Dave Young Date: Sun, 1 Feb 2009 18:54:54 +0800 Subject: USB: usb-serial: fix the aircable_init failure path The failure path of aircable_init is wrong, fix the order of (goto) labels. Signed-off-by: Dave Young Acked-by: Naranjo Manuel Francisco Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/aircable.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c index 537f953..6d106e7 100644 --- a/drivers/usb/serial/aircable.c +++ b/drivers/usb/serial/aircable.c @@ -621,9 +621,9 @@ static int __init aircable_init(void) goto failed_usb_register; return 0; -failed_serial_register: - usb_serial_deregister(&aircable_device); failed_usb_register: + usb_serial_deregister(&aircable_device); +failed_serial_register: return retval; } -- cgit v1.1 From e38c287447e5a3ff905a59dd81269c14cd12ffa1 Mon Sep 17 00:00:00 2001 From: Stephane Clerambault Date: Mon, 2 Feb 2009 13:39:12 -0800 Subject: USB: ftdi_sio: add support for the NDI Polaris system Add support for the NDI Polaris system *http://www.ndigital.com/). Cc: Ian Abbott Cc: Oliver Neukum Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 1 + drivers/usb/serial/ftdi_sio.h | 3 +++ 2 files changed, 4 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 7559733..64b8429 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -662,6 +662,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) }, { USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) }, { USB_DEVICE(FTDI_VID, DIEBOLD_BCS_SE923_PID) }, + { USB_DEVICE(FTDI_VID, FTDI_NDI_HUC_PID) }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 1b62eff..e300c84 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -844,6 +844,9 @@ #define TML_VID 0x1B91 /* Vendor ID */ #define TML_USB_SERIAL_PID 0x0064 /* USB - Serial Converter */ +/* NDI Polaris System */ +#define FTDI_NDI_HUC_PID 0xDA70 + /* Propox devices */ #define FTDI_PROPOX_JTAGCABLEII_PID 0xD738 -- cgit v1.1 From 506e9469833c66ed6bb9acd902e208f7301b6adb Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 4 Feb 2009 15:48:03 -0500 Subject: USB: usb-storage: add Pentax to the bad-vendor list MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch (as1202) adds Pentax to usb-storage's list of bad vendors whose devices always need the CAPACITY_HEURISTICS flag. This is in addition to the existing entries: Nokia, Nikon, and Motorola. Signed-off-by: Alan Stern Tested-by: Virgo Pärna Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/scsiglue.c | 2 ++ drivers/usb/storage/unusual_devs.h | 15 --------------- 2 files changed, 2 insertions(+), 15 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index 2a42b86..727c506 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -64,6 +64,7 @@ */ #define VENDOR_ID_NOKIA 0x0421 #define VENDOR_ID_NIKON 0x04b0 +#define VENDOR_ID_PENTAX 0x0a17 #define VENDOR_ID_MOTOROLA 0x22b8 /*********************************************************************** @@ -158,6 +159,7 @@ static int slave_configure(struct scsi_device *sdev) switch (le16_to_cpu(us->pusb_dev->descriptor.idVendor)) { case VENDOR_ID_NOKIA: case VENDOR_ID_NIKON: + case VENDOR_ID_PENTAX: case VENDOR_ID_MOTOROLA: if (!(us->fflags & (US_FL_FIX_CAPACITY | US_FL_CAPACITY_OK))) diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 69269f7..8e878ca 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1354,21 +1354,6 @@ UNUSUAL_DEV( 0x0a17, 0x0004, 0x1000, 0x1000, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_INQUIRY ), - -/* Submitted by Per Winkvist */ -UNUSUAL_DEV( 0x0a17, 0x006, 0x0000, 0xffff, - "Pentax", - "Optio S/S4", - US_SC_DEVICE, US_PR_DEVICE, NULL, - US_FL_FIX_INQUIRY ), - -/* Reported by Jaak Ristioja */ -UNUSUAL_DEV( 0x0a17, 0x006e, 0x0100, 0x0100, - "Pentax", - "K10D", - US_SC_DEVICE, US_PR_DEVICE, NULL, - US_FL_FIX_CAPACITY ), - /* These are virtual windows driver CDs, which the zd1211rw driver * automatically converts into WLAN devices. */ UNUSUAL_DEV( 0x0ace, 0x2011, 0x0101, 0x0101, -- cgit v1.1 From 64905b48098761e779bb848e69365c018894ea81 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 3 Feb 2009 11:11:38 +0300 Subject: USB: ftdi_sio: unlock_kernel() on error in set_serial_info() There was one error path where unlock_kernel() wasn't called. This was found with a code checker (http://repo.or.cz/w/smatch.git/) Compile tested only, sorry. Signed-off-by: Dan Carpenter Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 64b8429..f92f4d7 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1065,8 +1065,10 @@ static int set_serial_info(struct tty_struct *tty, if (!capable(CAP_SYS_ADMIN)) { if (((new_serial.flags & ~ASYNC_USR_MASK) != - (priv->flags & ~ASYNC_USR_MASK))) + (priv->flags & ~ASYNC_USR_MASK))) { + unlock_kernel(); return -EPERM; + } priv->flags = ((priv->flags & ~ASYNC_USR_MASK) | (new_serial.flags & ASYNC_USR_MASK)); priv->custom_divisor = new_serial.custom_divisor; -- cgit v1.1 From 97dcf0416e390fc5c997d4ea60e6f975c7b7a1c3 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Wed, 4 Feb 2009 16:38:33 +0100 Subject: USB: two more usb ids for ti_usb_3410_5052 This patch adds device IDs and balances the counts to make the hot ID additioning mechanism work. Signed-off-by: Oliver Neukum Cc: stable Cc: Chris Adams Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ti_usb_3410_5052.c | 10 +++++++--- drivers/usb/serial/ti_usb_3410_5052.h | 2 ++ 2 files changed, 9 insertions(+), 3 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index baf5911..2620bf6 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -176,7 +176,7 @@ static unsigned int product_5052_count; /* the array dimension is the number of default entries plus */ /* TI_EXTRA_VID_PID_COUNT user defined entries plus 1 terminating */ /* null entry */ -static struct usb_device_id ti_id_table_3410[7+TI_EXTRA_VID_PID_COUNT+1] = { +static struct usb_device_id ti_id_table_3410[10+TI_EXTRA_VID_PID_COUNT+1] = { { USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) }, { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) }, @@ -185,9 +185,11 @@ static struct usb_device_id ti_id_table_3410[7+TI_EXTRA_VID_PID_COUNT+1] = { { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_PRODUCT_ID) }, { USB_DEVICE(MTS_VENDOR_ID, MTS_EDGE_PRODUCT_ID) }, { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) }, + { USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) }, + { USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) }, }; -static struct usb_device_id ti_id_table_5052[4+TI_EXTRA_VID_PID_COUNT+1] = { +static struct usb_device_id ti_id_table_5052[5+TI_EXTRA_VID_PID_COUNT+1] = { { USB_DEVICE(TI_VENDOR_ID, TI_5052_BOOT_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) }, @@ -195,7 +197,7 @@ static struct usb_device_id ti_id_table_5052[4+TI_EXTRA_VID_PID_COUNT+1] = { { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) }, }; -static struct usb_device_id ti_id_table_combined[6+2*TI_EXTRA_VID_PID_COUNT+1] = { +static struct usb_device_id ti_id_table_combined[14+2*TI_EXTRA_VID_PID_COUNT+1] = { { USB_DEVICE(TI_VENDOR_ID, TI_3410_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_3410_EZ430_ID) }, { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_NO_FW_PRODUCT_ID) }, @@ -208,6 +210,8 @@ static struct usb_device_id ti_id_table_combined[6+2*TI_EXTRA_VID_PID_COUNT+1] = { USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) }, { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) }, + { USB_DEVICE(IBM_VENDOR_ID, IBM_454B_PRODUCT_ID) }, + { USB_DEVICE(IBM_VENDOR_ID, IBM_454C_PRODUCT_ID) }, { } }; diff --git a/drivers/usb/serial/ti_usb_3410_5052.h b/drivers/usb/serial/ti_usb_3410_5052.h index b7ea5db..f323c60 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.h +++ b/drivers/usb/serial/ti_usb_3410_5052.h @@ -30,6 +30,8 @@ #define IBM_VENDOR_ID 0x04b3 #define TI_3410_PRODUCT_ID 0x3410 #define IBM_4543_PRODUCT_ID 0x4543 +#define IBM_454B_PRODUCT_ID 0x454b +#define IBM_454C_PRODUCT_ID 0x454c #define TI_3410_EZ430_ID 0xF430 /* TI ez430 development tool */ #define TI_5052_BOOT_PRODUCT_ID 0x5052 /* no EEPROM, no firmware */ #define TI_5152_BOOT_PRODUCT_ID 0x5152 /* no EEPROM, no firmware */ -- cgit v1.1 From c200b9c9e8ec93cdd262cfa1699ad92e883d4876 Mon Sep 17 00:00:00 2001 From: Dirk De Schepper Date: Fri, 6 Feb 2009 20:48:34 +0000 Subject: USB: option: New mobile broadband modems to be supported - New Novatel and Dell mobile broadband modem products added - Dell pid variables used in stead of numerical PIDs for known products Signed-off-by: Dirk De Schepper Cc: stable Signed-off-by: Matthias Urlichs Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 84 ++++++++++++++++++++++++++++++--------------- 1 file changed, 56 insertions(+), 28 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 9d2e77d..bfd0b68 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -199,14 +199,15 @@ static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *po #define NOVATELWIRELESS_PRODUCT_MC950D 0x4400 /* FUTURE NOVATEL PRODUCTS */ -#define NOVATELWIRELESS_PRODUCT_EVDO_1 0x6000 -#define NOVATELWIRELESS_PRODUCT_HSPA_1 0x7000 -#define NOVATELWIRELESS_PRODUCT_EMBEDDED_1 0x8000 -#define NOVATELWIRELESS_PRODUCT_GLOBAL_1 0x9000 -#define NOVATELWIRELESS_PRODUCT_EVDO_2 0x6001 -#define NOVATELWIRELESS_PRODUCT_HSPA_2 0x7001 -#define NOVATELWIRELESS_PRODUCT_EMBEDDED_2 0x8001 -#define NOVATELWIRELESS_PRODUCT_GLOBAL_2 0x9001 +#define NOVATELWIRELESS_PRODUCT_EVDO_FULLSPEED 0X6000 +#define NOVATELWIRELESS_PRODUCT_EVDO_HIGHSPEED 0X6001 +#define NOVATELWIRELESS_PRODUCT_HSPA_FULLSPEED 0X7000 +#define NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED 0X7001 +#define NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_FULLSPEED 0X8000 +#define NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_HIGHSPEED 0X8001 +#define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED 0X9000 +#define NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_HIGHSPEED 0X9001 +#define NOVATELWIRELESS_PRODUCT_GLOBAL 0XA001 /* AMOI PRODUCTS */ #define AMOI_VENDOR_ID 0x1614 @@ -216,6 +217,27 @@ static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *po #define DELL_VENDOR_ID 0x413C +/* Dell modems */ +#define DELL_PRODUCT_5700_MINICARD 0x8114 +#define DELL_PRODUCT_5500_MINICARD 0x8115 +#define DELL_PRODUCT_5505_MINICARD 0x8116 +#define DELL_PRODUCT_5700_EXPRESSCARD 0x8117 +#define DELL_PRODUCT_5510_EXPRESSCARD 0x8118 + +#define DELL_PRODUCT_5700_MINICARD_SPRINT 0x8128 +#define DELL_PRODUCT_5700_MINICARD_TELUS 0x8129 + +#define DELL_PRODUCT_5720_MINICARD_VZW 0x8133 +#define DELL_PRODUCT_5720_MINICARD_SPRINT 0x8134 +#define DELL_PRODUCT_5720_MINICARD_TELUS 0x8135 +#define DELL_PRODUCT_5520_MINICARD_CINGULAR 0x8136 +#define DELL_PRODUCT_5520_MINICARD_GENERIC_L 0x8137 +#define DELL_PRODUCT_5520_MINICARD_GENERIC_I 0x8138 + +#define DELL_PRODUCT_5730_MINICARD_SPRINT 0x8180 +#define DELL_PRODUCT_5730_MINICARD_TELUS 0x8181 +#define DELL_PRODUCT_5730_MINICARD_VZW 0x8182 + #define KYOCERA_VENDOR_ID 0x0c88 #define KYOCERA_PRODUCT_KPC650 0x17da #define KYOCERA_PRODUCT_KPC680 0x180a @@ -389,31 +411,37 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EU870D) }, /* Novatel EU850D/EU860D/EU870D */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC950D) }, /* Novatel MC930D/MC950D */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC727) }, /* Novatel MC727/U727/USB727 */ - { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_1) }, /* Novatel EVDO product */ - { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_1) }, /* Novatel HSPA product */ - { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EMBEDDED_1) }, /* Novatel Embedded product */ - { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_GLOBAL_1) }, /* Novatel Global product */ - { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_2) }, /* Novatel EVDO product */ - { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_2) }, /* Novatel HSPA product */ - { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EMBEDDED_2) }, /* Novatel Embedded product */ - { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_GLOBAL_2) }, /* Novatel Global product */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_FULLSPEED) }, /* Novatel EVDO product */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_FULLSPEED) }, /* Novatel HSPA product */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_FULLSPEED) }, /* Novatel EVDO Embedded product */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_FULLSPEED) }, /* Novatel HSPA Embedded product */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_HIGHSPEED) }, /* Novatel EVDO product */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_HIGHSPEED) }, /* Novatel HSPA product */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_HIGHSPEED) }, /* Novatel EVDO Embedded product */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_EMBEDDED_HIGHSPEED) }, /* Novatel HSPA Embedded product */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_GLOBAL) }, /* Novatel Global product */ { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01) }, { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01A) }, { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H02) }, - { USB_DEVICE(DELL_VENDOR_ID, 0x8114) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite EV620 CDMA/EV-DO */ - { USB_DEVICE(DELL_VENDOR_ID, 0x8115) }, /* Dell Wireless 5500 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */ - { USB_DEVICE(DELL_VENDOR_ID, 0x8116) }, /* Dell Wireless 5505 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */ - { USB_DEVICE(DELL_VENDOR_ID, 0x8117) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO ExpressCard == Novatel Merlin XV620 CDMA/EV-DO */ - { USB_DEVICE(DELL_VENDOR_ID, 0x8118) }, /* Dell Wireless 5510 Mobile Broadband HSDPA ExpressCard == Novatel Merlin XU870 HSDPA/3G */ - { USB_DEVICE(DELL_VENDOR_ID, 0x8128) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite E720 CDMA/EV-DO */ - { USB_DEVICE(DELL_VENDOR_ID, 0x8129) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite ET620 CDMA/EV-DO */ - { USB_DEVICE(DELL_VENDOR_ID, 0x8133) }, /* Dell Wireless 5720 == Novatel EV620 CDMA/EV-DO */ - { USB_DEVICE(DELL_VENDOR_ID, 0x8136) }, /* Dell Wireless HSDPA 5520 == Novatel Expedite EU860D */ - { USB_DEVICE(DELL_VENDOR_ID, 0x8137) }, /* Dell Wireless HSDPA 5520 */ - { USB_DEVICE(DELL_VENDOR_ID, 0x8138) }, /* Dell Wireless 5520 Voda I Mobile Broadband (3G HSDPA) Minicard */ - { USB_DEVICE(DELL_VENDOR_ID, 0x8147) }, /* Dell Wireless 5530 Mobile Broadband (3G HSPA) Mini-Card */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5700_MINICARD) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite EV620 CDMA/EV-DO */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5500_MINICARD) }, /* Dell Wireless 5500 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5505_MINICARD) }, /* Dell Wireless 5505 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5700_EXPRESSCARD) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO ExpressCard == Novatel Merlin XV620 CDMA/EV-DO */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5510_EXPRESSCARD) }, /* Dell Wireless 5510 Mobile Broadband HSDPA ExpressCard == Novatel Merlin XU870 HSDPA/3G */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5700_MINICARD_SPRINT) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite E720 CDMA/EV-DO */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5700_MINICARD_TELUS) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite ET620 CDMA/EV-DO */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5720_MINICARD_VZW) }, /* Dell Wireless 5720 == Novatel EV620 CDMA/EV-DO */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5720_MINICARD_SPRINT) }, /* Dell Wireless 5720 == Novatel EV620 CDMA/EV-DO */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5720_MINICARD_TELUS) }, /* Dell Wireless 5720 == Novatel EV620 CDMA/EV-DO */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5520_MINICARD_CINGULAR) }, /* Dell Wireless HSDPA 5520 == Novatel Expedite EU860D */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5520_MINICARD_GENERIC_L) }, /* Dell Wireless HSDPA 5520 */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5520_MINICARD_GENERIC_I) }, /* Dell Wireless 5520 Voda I Mobile Broadband (3G HSDPA) Minicard */ + { USB_DEVICE(DELL_VENDOR_ID, 0x8147) }, /* Dell Wireless 5530 Mobile Broadband (3G HSPA) Mini-Card */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_SPRINT) }, /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_TELUS) }, /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */ + { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_VZW) }, /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */ { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) }, /* ADU-E100, ADU-310 */ { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) }, { USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) }, -- cgit v1.1 From 26e1287594864169577327fef233befc9739be3b Mon Sep 17 00:00:00 2001 From: Ivan Kuten Date: Fri, 6 Feb 2009 17:42:34 +0800 Subject: USB: Correct Makefile to make isp1760 buildable Signed-off-by: Ivan Kuten Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/Makefile | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/usb') diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index 8bcde8c..b2ceb4a 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -11,6 +11,7 @@ obj-$(CONFIG_USB_MON) += mon/ obj-$(CONFIG_PCI) += host/ obj-$(CONFIG_USB_EHCI_HCD) += host/ obj-$(CONFIG_USB_ISP116X_HCD) += host/ +obj-$(CONFIG_USB_ISP1760_HCD) += host/ obj-$(CONFIG_USB_OHCI_HCD) += host/ obj-$(CONFIG_USB_UHCI_HCD) += host/ obj-$(CONFIG_USB_FHCI_HCD) += host/ -- cgit v1.1 From 049a6acb503ca7acc11d563db79a2d54f054e0d0 Mon Sep 17 00:00:00 2001 From: Nick Holloway Date: Sun, 25 Jan 2009 16:58:43 +0000 Subject: USB: Storage: Update unusual_devs entry for Datafab KECF-USB This device suffers from the off-by-one error when reporting the capacity, so add US_FL_FIX_CAPACITY to the existing entry. Signed-off-by: Nick Holloway Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 8e878ca..50dc33a 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1214,7 +1214,7 @@ UNUSUAL_DEV( 0x07c4, 0xa400, 0x0000, 0xffff, "Datafab", "KECF-USB", US_SC_DEVICE, US_PR_DEVICE, NULL, - US_FL_FIX_INQUIRY ), + US_FL_FIX_INQUIRY | US_FL_FIX_CAPACITY ), /* Reported by Rauch Wolke */ UNUSUAL_DEV( 0x07c4, 0xa4a5, 0x0000, 0xffff, -- cgit v1.1 From 35c26c2cf6a6a2d1c48add732d8ba002bd90784c Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Sat, 14 Feb 2009 22:56:56 -0800 Subject: rndis: remove private wrapper of __constant_cpu_to_le32 Use cpu_to_le32 directly as it handles constant folding now, replace direct uses of __constant_cpu_to_{endian} as well. Signed-off-by: Harvey Harrison Acked-by: David Brownell Signed-off-by: David S. Miller --- drivers/usb/gadget/rndis.c | 92 +++++++++++++++++++++++----------------------- 1 file changed, 46 insertions(+), 46 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/rndis.c b/drivers/usb/gadget/rndis.c index 8c26f5e..d2860a8 100644 --- a/drivers/usb/gadget/rndis.c +++ b/drivers/usb/gadget/rndis.c @@ -63,7 +63,7 @@ MODULE_PARM_DESC (rndis_debug, "enable debugging"); static rndis_params rndis_per_dev_params [RNDIS_MAX_CONFIGS]; /* Driver Version */ -static const __le32 rndis_driver_version = __constant_cpu_to_le32 (1); +static const __le32 rndis_driver_version = cpu_to_le32 (1); /* Function Prototypes */ static rndis_resp_t *rndis_add_response (int configNr, u32 length); @@ -190,7 +190,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len, /* response goes here, right after the header */ outbuf = (__le32 *) &resp[1]; - resp->InformationBufferOffset = __constant_cpu_to_le32 (16); + resp->InformationBufferOffset = cpu_to_le32 (16); net = rndis_per_dev_params[configNr].dev; if (net->get_stats) @@ -221,7 +221,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len, * reddite ergo quae sunt Caesaris Caesari * et quae sunt Dei Deo! */ - *outbuf = __constant_cpu_to_le32 (0); + *outbuf = cpu_to_le32 (0); retval = 0; break; @@ -256,7 +256,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len, pr_debug("%s: OID_GEN_LINK_SPEED\n", __func__); if (rndis_per_dev_params [configNr].media_state == NDIS_MEDIA_STATE_DISCONNECTED) - *outbuf = __constant_cpu_to_le32 (0); + *outbuf = cpu_to_le32 (0); else *outbuf = cpu_to_le32 ( rndis_per_dev_params [configNr].speed); @@ -317,7 +317,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len, /* mandatory */ case OID_GEN_MAXIMUM_TOTAL_SIZE: pr_debug("%s: OID_GEN_MAXIMUM_TOTAL_SIZE\n", __func__); - *outbuf = __constant_cpu_to_le32(RNDIS_MAX_TOTAL_SIZE); + *outbuf = cpu_to_le32(RNDIS_MAX_TOTAL_SIZE); retval = 0; break; @@ -332,7 +332,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len, case OID_GEN_PHYSICAL_MEDIUM: pr_debug("%s: OID_GEN_PHYSICAL_MEDIUM\n", __func__); - *outbuf = __constant_cpu_to_le32 (0); + *outbuf = cpu_to_le32 (0); retval = 0; break; @@ -342,7 +342,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len, */ case OID_GEN_MAC_OPTIONS: /* from WinME */ pr_debug("%s: OID_GEN_MAC_OPTIONS\n", __func__); - *outbuf = __constant_cpu_to_le32( + *outbuf = cpu_to_le32( NDIS_MAC_OPTION_RECEIVE_SERIALIZED | NDIS_MAC_OPTION_FULL_DUPLEX); retval = 0; @@ -431,7 +431,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len, case OID_802_3_MULTICAST_LIST: pr_debug("%s: OID_802_3_MULTICAST_LIST\n", __func__); /* Multicast base address only */ - *outbuf = __constant_cpu_to_le32 (0xE0000000); + *outbuf = cpu_to_le32 (0xE0000000); retval = 0; break; @@ -439,7 +439,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len, case OID_802_3_MAXIMUM_LIST_SIZE: pr_debug("%s: OID_802_3_MAXIMUM_LIST_SIZE\n", __func__); /* Multicast base address only */ - *outbuf = __constant_cpu_to_le32 (1); + *outbuf = cpu_to_le32 (1); retval = 0; break; @@ -461,14 +461,14 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len, /* mandatory */ case OID_802_3_XMIT_ONE_COLLISION: pr_debug("%s: OID_802_3_XMIT_ONE_COLLISION\n", __func__); - *outbuf = __constant_cpu_to_le32 (0); + *outbuf = cpu_to_le32 (0); retval = 0; break; /* mandatory */ case OID_802_3_XMIT_MORE_COLLISIONS: pr_debug("%s: OID_802_3_XMIT_MORE_COLLISIONS\n", __func__); - *outbuf = __constant_cpu_to_le32 (0); + *outbuf = cpu_to_le32 (0); retval = 0; break; @@ -572,24 +572,24 @@ static int rndis_init_response (int configNr, rndis_init_msg_type *buf) return -ENOMEM; resp = (rndis_init_cmplt_type *) r->buf; - resp->MessageType = __constant_cpu_to_le32 ( + resp->MessageType = cpu_to_le32 ( REMOTE_NDIS_INITIALIZE_CMPLT); - resp->MessageLength = __constant_cpu_to_le32 (52); + resp->MessageLength = cpu_to_le32 (52); resp->RequestID = buf->RequestID; /* Still LE in msg buffer */ - resp->Status = __constant_cpu_to_le32 (RNDIS_STATUS_SUCCESS); - resp->MajorVersion = __constant_cpu_to_le32 (RNDIS_MAJOR_VERSION); - resp->MinorVersion = __constant_cpu_to_le32 (RNDIS_MINOR_VERSION); - resp->DeviceFlags = __constant_cpu_to_le32 (RNDIS_DF_CONNECTIONLESS); - resp->Medium = __constant_cpu_to_le32 (RNDIS_MEDIUM_802_3); - resp->MaxPacketsPerTransfer = __constant_cpu_to_le32 (1); + resp->Status = cpu_to_le32 (RNDIS_STATUS_SUCCESS); + resp->MajorVersion = cpu_to_le32 (RNDIS_MAJOR_VERSION); + resp->MinorVersion = cpu_to_le32 (RNDIS_MINOR_VERSION); + resp->DeviceFlags = cpu_to_le32 (RNDIS_DF_CONNECTIONLESS); + resp->Medium = cpu_to_le32 (RNDIS_MEDIUM_802_3); + resp->MaxPacketsPerTransfer = cpu_to_le32 (1); resp->MaxTransferSize = cpu_to_le32 ( params->dev->mtu + sizeof (struct ethhdr) + sizeof (struct rndis_packet_msg_type) + 22); - resp->PacketAlignmentFactor = __constant_cpu_to_le32 (0); - resp->AFListOffset = __constant_cpu_to_le32 (0); - resp->AFListSize = __constant_cpu_to_le32 (0); + resp->PacketAlignmentFactor = cpu_to_le32 (0); + resp->AFListOffset = cpu_to_le32 (0); + resp->AFListSize = cpu_to_le32 (0); params->resp_avail(params->v); return 0; @@ -617,7 +617,7 @@ static int rndis_query_response (int configNr, rndis_query_msg_type *buf) return -ENOMEM; resp = (rndis_query_cmplt_type *) r->buf; - resp->MessageType = __constant_cpu_to_le32 (REMOTE_NDIS_QUERY_CMPLT); + resp->MessageType = cpu_to_le32 (REMOTE_NDIS_QUERY_CMPLT); resp->RequestID = buf->RequestID; /* Still LE in msg buffer */ if (gen_ndis_query_resp (configNr, le32_to_cpu (buf->OID), @@ -626,13 +626,13 @@ static int rndis_query_response (int configNr, rndis_query_msg_type *buf) le32_to_cpu(buf->InformationBufferLength), r)) { /* OID not supported */ - resp->Status = __constant_cpu_to_le32 ( + resp->Status = cpu_to_le32 ( RNDIS_STATUS_NOT_SUPPORTED); - resp->MessageLength = __constant_cpu_to_le32 (sizeof *resp); - resp->InformationBufferLength = __constant_cpu_to_le32 (0); - resp->InformationBufferOffset = __constant_cpu_to_le32 (0); + resp->MessageLength = cpu_to_le32 (sizeof *resp); + resp->InformationBufferLength = cpu_to_le32 (0); + resp->InformationBufferOffset = cpu_to_le32 (0); } else - resp->Status = __constant_cpu_to_le32 (RNDIS_STATUS_SUCCESS); + resp->Status = cpu_to_le32 (RNDIS_STATUS_SUCCESS); params->resp_avail(params->v); return 0; @@ -665,14 +665,14 @@ static int rndis_set_response (int configNr, rndis_set_msg_type *buf) pr_debug("\n"); #endif - resp->MessageType = __constant_cpu_to_le32 (REMOTE_NDIS_SET_CMPLT); - resp->MessageLength = __constant_cpu_to_le32 (16); + resp->MessageType = cpu_to_le32 (REMOTE_NDIS_SET_CMPLT); + resp->MessageLength = cpu_to_le32 (16); resp->RequestID = buf->RequestID; /* Still LE in msg buffer */ if (gen_ndis_set_resp (configNr, le32_to_cpu (buf->OID), ((u8 *) buf) + 8 + BufOffset, BufLength, r)) - resp->Status = __constant_cpu_to_le32 (RNDIS_STATUS_NOT_SUPPORTED); + resp->Status = cpu_to_le32 (RNDIS_STATUS_NOT_SUPPORTED); else - resp->Status = __constant_cpu_to_le32 (RNDIS_STATUS_SUCCESS); + resp->Status = cpu_to_le32 (RNDIS_STATUS_SUCCESS); params->resp_avail(params->v); return 0; @@ -689,11 +689,11 @@ static int rndis_reset_response (int configNr, rndis_reset_msg_type *buf) return -ENOMEM; resp = (rndis_reset_cmplt_type *) r->buf; - resp->MessageType = __constant_cpu_to_le32 (REMOTE_NDIS_RESET_CMPLT); - resp->MessageLength = __constant_cpu_to_le32 (16); - resp->Status = __constant_cpu_to_le32 (RNDIS_STATUS_SUCCESS); + resp->MessageType = cpu_to_le32 (REMOTE_NDIS_RESET_CMPLT); + resp->MessageLength = cpu_to_le32 (16); + resp->Status = cpu_to_le32 (RNDIS_STATUS_SUCCESS); /* resent information */ - resp->AddressingReset = __constant_cpu_to_le32 (1); + resp->AddressingReset = cpu_to_le32 (1); params->resp_avail(params->v); return 0; @@ -713,11 +713,11 @@ static int rndis_keepalive_response (int configNr, return -ENOMEM; resp = (rndis_keepalive_cmplt_type *) r->buf; - resp->MessageType = __constant_cpu_to_le32 ( + resp->MessageType = cpu_to_le32 ( REMOTE_NDIS_KEEPALIVE_CMPLT); - resp->MessageLength = __constant_cpu_to_le32 (16); + resp->MessageLength = cpu_to_le32 (16); resp->RequestID = buf->RequestID; /* Still LE in msg buffer */ - resp->Status = __constant_cpu_to_le32 (RNDIS_STATUS_SUCCESS); + resp->Status = cpu_to_le32 (RNDIS_STATUS_SUCCESS); params->resp_avail(params->v); return 0; @@ -742,12 +742,12 @@ static int rndis_indicate_status_msg (int configNr, u32 status) return -ENOMEM; resp = (rndis_indicate_status_msg_type *) r->buf; - resp->MessageType = __constant_cpu_to_le32 ( + resp->MessageType = cpu_to_le32 ( REMOTE_NDIS_INDICATE_STATUS_MSG); - resp->MessageLength = __constant_cpu_to_le32 (20); + resp->MessageLength = cpu_to_le32 (20); resp->Status = cpu_to_le32 (status); - resp->StatusBufferLength = __constant_cpu_to_le32 (0); - resp->StatusBufferOffset = __constant_cpu_to_le32 (0); + resp->StatusBufferLength = cpu_to_le32 (0); + resp->StatusBufferOffset = cpu_to_le32 (0); params->resp_avail(params->v); return 0; @@ -963,9 +963,9 @@ void rndis_add_hdr (struct sk_buff *skb) return; header = (void *) skb_push (skb, sizeof *header); memset (header, 0, sizeof *header); - header->MessageType = __constant_cpu_to_le32(REMOTE_NDIS_PACKET_MSG); + header->MessageType = cpu_to_le32(REMOTE_NDIS_PACKET_MSG); header->MessageLength = cpu_to_le32(skb->len); - header->DataOffset = __constant_cpu_to_le32 (36); + header->DataOffset = cpu_to_le32 (36); header->DataLength = cpu_to_le32(skb->len - sizeof *header); } @@ -1029,7 +1029,7 @@ int rndis_rm_hdr(struct sk_buff *skb) __le32 *tmp = (void *) skb->data; /* MessageType, MessageLength */ - if (__constant_cpu_to_le32(REMOTE_NDIS_PACKET_MSG) + if (cpu_to_le32(REMOTE_NDIS_PACKET_MSG) != get_unaligned(tmp++)) return -EINVAL; tmp++; -- cgit v1.1 From a3c1239eb59c0a907f8be5587d42e950f44543f8 Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Mon, 16 Feb 2009 14:37:12 +0000 Subject: wusb: whci-hcd: always lock whc->lock with interrupts disabled Always lock whc->lock with spin_lock_irq() or spin_lock_irqsave(). Signed-off-by: David Vrabel --- drivers/usb/host/whci/asl.c | 4 ++-- drivers/usb/host/whci/pzl.c | 4 ++-- 2 files changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/whci/asl.c b/drivers/usb/host/whci/asl.c index 2291c5f..958751c 100644 --- a/drivers/usb/host/whci/asl.c +++ b/drivers/usb/host/whci/asl.c @@ -227,13 +227,13 @@ void scan_async_work(struct work_struct *work) * Now that the ASL is updated, complete the removal of any * removed qsets. */ - spin_lock(&whc->lock); + spin_lock_irq(&whc->lock); list_for_each_entry_safe(qset, t, &whc->async_removed_list, list_node) { qset_remove_complete(whc, qset); } - spin_unlock(&whc->lock); + spin_unlock_irq(&whc->lock); } /** diff --git a/drivers/usb/host/whci/pzl.c b/drivers/usb/host/whci/pzl.c index 7dc85a0..df8b85f 100644 --- a/drivers/usb/host/whci/pzl.c +++ b/drivers/usb/host/whci/pzl.c @@ -255,13 +255,13 @@ void scan_periodic_work(struct work_struct *work) * Now that the PZL is updated, complete the removal of any * removed qsets. */ - spin_lock(&whc->lock); + spin_lock_irq(&whc->lock); list_for_each_entry_safe(qset, t, &whc->periodic_removed_list, list_node) { qset_remove_complete(whc, qset); } - spin_unlock(&whc->lock); + spin_unlock_irq(&whc->lock); } /** -- cgit v1.1 From 3494252d5644993f407a45f01c3e8ad5ae38f93c Mon Sep 17 00:00:00 2001 From: "Rafael J. Wysocki" Date: Fri, 13 Feb 2009 23:41:12 +0100 Subject: USB/PCI: Fix resume breakage of controllers behind cardbus bridges If a USB PCI controller is behind a cardbus bridge, we are trying to restore its configuration registers too early, before the cardbus bridge is operational. To fix this, call pci_restore_state() from usb_hcd_pci_resume() and remove usb_hcd_pci_resume_early() which is no longer necessary (the configuration spaces of USB controllers that are not behind cardbus bridges will be restored by the PCI PM core with interrupts disabled anyway). This patch fixes the regression from 2.6.28 tracked as http://bugzilla.kernel.org/show_bug.cgi?id=12659 [ Side note: the proper long-term fix is probably to just force the unplug event at suspend time instead of doing a plug/unplug at resume time, but this patch is fine regardless - Linus ] Signed-off-by: Rafael J. Wysocki Reported-by: Miles Lane Signed-off-by: Linus Torvalds --- drivers/usb/core/hcd-pci.c | 15 ++------------- drivers/usb/core/hcd.h | 1 - drivers/usb/host/ehci-pci.c | 1 - drivers/usb/host/ohci-pci.c | 1 - drivers/usb/host/uhci-hcd.c | 1 - 5 files changed, 2 insertions(+), 17 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index c54fc40..a4301dc 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -298,19 +298,6 @@ int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t message) EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend); /** - * usb_hcd_pci_resume_early - resume a PCI-based HCD before IRQs are enabled - * @dev: USB Host Controller being resumed - * - * Store this function in the HCD's struct pci_driver as .resume_early. - */ -int usb_hcd_pci_resume_early(struct pci_dev *dev) -{ - pci_restore_state(dev); - return 0; -} -EXPORT_SYMBOL_GPL(usb_hcd_pci_resume_early); - -/** * usb_hcd_pci_resume - power management resume of a PCI-based HCD * @dev: USB Host Controller being resumed * @@ -333,6 +320,8 @@ int usb_hcd_pci_resume(struct pci_dev *dev) } #endif + pci_restore_state(dev); + hcd = pci_get_drvdata(dev); if (hcd->state != HC_STATE_SUSPENDED) { dev_dbg(hcd->self.controller, diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h index 5b94a56..f750eb1 100644 --- a/drivers/usb/core/hcd.h +++ b/drivers/usb/core/hcd.h @@ -257,7 +257,6 @@ extern void usb_hcd_pci_remove(struct pci_dev *dev); #ifdef CONFIG_PM extern int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t msg); -extern int usb_hcd_pci_resume_early(struct pci_dev *dev); extern int usb_hcd_pci_resume(struct pci_dev *dev); #endif /* CONFIG_PM */ diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index bb21fb0..abb9a77 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -432,7 +432,6 @@ static struct pci_driver ehci_pci_driver = { #ifdef CONFIG_PM .suspend = usb_hcd_pci_suspend, - .resume_early = usb_hcd_pci_resume_early, .resume = usb_hcd_pci_resume, #endif .shutdown = usb_hcd_pci_shutdown, diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index 5d625c3..f9961b4 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -487,7 +487,6 @@ static struct pci_driver ohci_pci_driver = { #ifdef CONFIG_PM .suspend = usb_hcd_pci_suspend, - .resume_early = usb_hcd_pci_resume_early, .resume = usb_hcd_pci_resume, #endif diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 944f7e0..cf5e4cf 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -942,7 +942,6 @@ static struct pci_driver uhci_pci_driver = { #ifdef CONFIG_PM .suspend = usb_hcd_pci_suspend, - .resume_early = usb_hcd_pci_resume_early, .resume = usb_hcd_pci_resume, #endif /* PM */ }; -- cgit v1.1 From 22eb36f49e24e922ca6594a99157a3fcb92d3824 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Thu, 19 Feb 2009 11:57:46 +0100 Subject: [ARM] 5403/1: pxa25x_ep_fifo_flush() *ep->reg_udccs always set to 0 *ep->reg_udccs is always set to 0. Signed-off-by: Roel Kluin Acked-by: Eric Miao Signed-off-by: Russell King --- drivers/usb/gadget/pxa25x_udc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/pxa25x_udc.c b/drivers/usb/gadget/pxa25x_udc.c index 9b36205..0ce4e28 100644 --- a/drivers/usb/gadget/pxa25x_udc.c +++ b/drivers/usb/gadget/pxa25x_udc.c @@ -904,8 +904,8 @@ static void pxa25x_ep_fifo_flush(struct usb_ep *_ep) /* most IN status is the same, but ISO can't stall */ *ep->reg_udccs = UDCCS_BI_TPC|UDCCS_BI_FTF|UDCCS_BI_TUR - | (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC) - ? 0 : UDCCS_BI_SST; + | (ep->bmAttributes == USB_ENDPOINT_XFER_ISOC + ? 0 : UDCCS_BI_SST); } -- cgit v1.1 From 9a6e184c804b33a2c2ea974efcd3c9798d30cb39 Mon Sep 17 00:00:00 2001 From: Li Yang Date: Fri, 13 Feb 2009 16:14:39 +0800 Subject: USB: fsl_usb2_udc: fix potential queue head corruption Clear next TD field and status field in queue head initialization code to prevent unpredictable result caused by residue of usb reset. Signed-off-by: Li Yang Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/fsl_usb2_udc.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/fsl_usb2_udc.c b/drivers/usb/gadget/fsl_usb2_udc.c index f3c6703..d8d9a52 100644 --- a/drivers/usb/gadget/fsl_usb2_udc.c +++ b/drivers/usb/gadget/fsl_usb2_udc.c @@ -404,7 +404,10 @@ static void struct_ep_qh_setup(struct fsl_udc *udc, unsigned char ep_num, } if (zlt) tmp |= EP_QUEUE_HEAD_ZLT_SEL; + p_QH->max_pkt_length = cpu_to_le32(tmp); + p_QH->next_dtd_ptr = 1; + p_QH->size_ioc_int_sts = 0; return; } -- cgit v1.1 From 9aa09d2f8f4bc440d6db1c3414d4009642875240 Mon Sep 17 00:00:00 2001 From: Karsten Wiese Date: Sun, 8 Feb 2009 16:07:58 -0800 Subject: USB: EHCI: slow down ITD reuse Currently ITDs are immediately recycled whenever their URB completes. However, EHCI hardware can sometimes remember some ITD state. This means that when the ITD is reused before end-of-frame it may sometimes cause the hardware to reference bogus state. This patch defers reusing such ITDs by moving them into a new ehci member cached_itd_list. ITDs resting in cached_itd_list are moved back into their stream's free_list once scan_periodic() detects that the active frame has elapsed. This makes the snd_usb_us122l driver (in kernel since .28) work right when it's hooked up through EHCI. [ dbrownell@users.sourceforge.net: comment fixups ] Signed-off-by: Karsten Wiese Tested-by: Philippe Carriere Tested-by: Federico Briata Cc: stable Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-hcd.c | 2 ++ drivers/usb/host/ehci-mem.c | 1 + drivers/usb/host/ehci-sched.c | 56 ++++++++++++++++++++++++++++++++++++------- drivers/usb/host/ehci.h | 6 +++++ 4 files changed, 57 insertions(+), 8 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 4725d15..e551bb3 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -485,6 +485,7 @@ static int ehci_init(struct usb_hcd *hcd) * periodic_size can shrink by USBCMD update if hcc_params allows. */ ehci->periodic_size = DEFAULT_I_TDPS; + INIT_LIST_HEAD(&ehci->cached_itd_list); if ((retval = ehci_mem_init(ehci, GFP_KERNEL)) < 0) return retval; @@ -497,6 +498,7 @@ static int ehci_init(struct usb_hcd *hcd) ehci->reclaim = NULL; ehci->next_uframe = -1; + ehci->clock_frame = -1; /* * dedicate a qh for the async ring head, since we couldn't unlink diff --git a/drivers/usb/host/ehci-mem.c b/drivers/usb/host/ehci-mem.c index 0431397..10d5291 100644 --- a/drivers/usb/host/ehci-mem.c +++ b/drivers/usb/host/ehci-mem.c @@ -128,6 +128,7 @@ static inline void qh_put (struct ehci_qh *qh) static void ehci_mem_cleanup (struct ehci_hcd *ehci) { + free_cached_itd_list(ehci); if (ehci->async) qh_put (ehci->async); ehci->async = NULL; diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index a081ee6..07bcb93 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -1004,7 +1004,8 @@ iso_stream_put(struct ehci_hcd *ehci, struct ehci_iso_stream *stream) is_in = (stream->bEndpointAddress & USB_DIR_IN) ? 0x10 : 0; stream->bEndpointAddress &= 0x0f; - stream->ep->hcpriv = NULL; + if (stream->ep) + stream->ep->hcpriv = NULL; if (stream->rescheduled) { ehci_info (ehci, "ep%d%s-iso rescheduled " @@ -1653,14 +1654,28 @@ itd_complete ( (stream->bEndpointAddress & USB_DIR_IN) ? "in" : "out"); } iso_stream_put (ehci, stream); - /* OK to recycle this ITD now that its completion callback ran. */ + done: usb_put_urb(urb); itd->urb = NULL; - itd->stream = NULL; - list_move(&itd->itd_list, &stream->free_list); - iso_stream_put(ehci, stream); - + if (ehci->clock_frame != itd->frame || itd->index[7] != -1) { + /* OK to recycle this ITD now. */ + itd->stream = NULL; + list_move(&itd->itd_list, &stream->free_list); + iso_stream_put(ehci, stream); + } else { + /* HW might remember this ITD, so we can't recycle it yet. + * Move it to a safe place until a new frame starts. + */ + list_move(&itd->itd_list, &ehci->cached_itd_list); + if (stream->refcount == 2) { + /* If iso_stream_put() were called here, stream + * would be freed. Instead, just prevent reuse. + */ + stream->ep->hcpriv = NULL; + stream->ep = NULL; + } + } return retval; } @@ -2101,6 +2116,20 @@ done: /*-------------------------------------------------------------------------*/ +static void free_cached_itd_list(struct ehci_hcd *ehci) +{ + struct ehci_itd *itd, *n; + + list_for_each_entry_safe(itd, n, &ehci->cached_itd_list, itd_list) { + struct ehci_iso_stream *stream = itd->stream; + itd->stream = NULL; + list_move(&itd->itd_list, &stream->free_list); + iso_stream_put(ehci, stream); + } +} + +/*-------------------------------------------------------------------------*/ + static void scan_periodic (struct ehci_hcd *ehci) { @@ -2115,10 +2144,17 @@ scan_periodic (struct ehci_hcd *ehci) * Touches as few pages as possible: cache-friendly. */ now_uframe = ehci->next_uframe; - if (HC_IS_RUNNING (ehci_to_hcd(ehci)->state)) + if (HC_IS_RUNNING(ehci_to_hcd(ehci)->state)) { clock = ehci_readl(ehci, &ehci->regs->frame_index); - else + clock_frame = (clock >> 3) % ehci->periodic_size; + } else { clock = now_uframe + mod - 1; + clock_frame = -1; + } + if (ehci->clock_frame != clock_frame) { + free_cached_itd_list(ehci); + ehci->clock_frame = clock_frame; + } clock %= mod; clock_frame = clock >> 3; @@ -2277,6 +2313,10 @@ restart: /* rescan the rest of this frame, then ... */ clock = now; clock_frame = clock >> 3; + if (ehci->clock_frame != clock_frame) { + free_cached_itd_list(ehci); + ehci->clock_frame = clock_frame; + } } else { now_uframe++; now_uframe %= mod; diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index fb7054cc..262b00c 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -87,6 +87,10 @@ struct ehci_hcd { /* one per controller */ int next_uframe; /* scan periodic, start here */ unsigned periodic_sched; /* periodic activity count */ + /* list of itds completed while clock_frame was still active */ + struct list_head cached_itd_list; + unsigned clock_frame; + /* per root hub port */ unsigned long reset_done [EHCI_MAX_ROOT_PORTS]; @@ -220,6 +224,8 @@ timer_action (struct ehci_hcd *ehci, enum ehci_timer_action action) } } +static void free_cached_itd_list(struct ehci_hcd *ehci); + /*-------------------------------------------------------------------------*/ #include -- cgit v1.1 From 29a46bf6f4f57df22f91573bb482a24237741347 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Tue, 10 Feb 2009 19:01:52 +0200 Subject: usb: gadget: obex: select correct ep descriptors We where selecting wrong ep descriptors causing some troubles while sending files over obex interface. The problem was a typo while usb_find_endpoint() was being called for HS endpoints. Acked-by: David Brownell Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/f_obex.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/f_obex.c b/drivers/usb/gadget/f_obex.c index 80c2e7e..38aa896 100644 --- a/drivers/usb/gadget/f_obex.c +++ b/drivers/usb/gadget/f_obex.c @@ -366,9 +366,9 @@ obex_bind(struct usb_configuration *c, struct usb_function *f) f->hs_descriptors = usb_copy_descriptors(hs_function); obex->hs.obex_in = usb_find_endpoint(hs_function, - f->descriptors, &obex_hs_ep_in_desc); + f->hs_descriptors, &obex_hs_ep_in_desc); obex->hs.obex_out = usb_find_endpoint(hs_function, - f->descriptors, &obex_hs_ep_out_desc); + f->hs_descriptors, &obex_hs_ep_out_desc); } /* Avoid letting this gadget enumerate until the userspace -- cgit v1.1 From 28fb66821f884870987a0b5ab064ef651d9f7c16 Mon Sep 17 00:00:00 2001 From: Jesse Sung Date: Fri, 20 Feb 2009 21:13:45 -0800 Subject: USB: option: add BenQ 3g modem information This patch addes the BenQ 3g modem support to the option driver. From: Jesse Sung Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index bfd0b68..c454b52 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -296,6 +296,9 @@ static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *po #define ERICSSON_VENDOR_ID 0x0bdb #define ERICSSON_PRODUCT_F3507G 0x1900 +#define BENQ_VENDOR_ID 0x04a5 +#define BENQ_PRODUCT_H10 0x4068 + static struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) }, @@ -510,6 +513,8 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) }, { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) }, { USB_DEVICE(ERICSSON_VENDOR_ID, ERICSSON_PRODUCT_F3507G) }, + { USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) }, + { USB_DEVICE(0x1da5, 0x4515) }, /* BenQ H20 */ { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); -- cgit v1.1 From 155df65ae11dfc322214c6f887185929c809df1b Mon Sep 17 00:00:00 2001 From: Dmitriy Taychenachev Date: Wed, 25 Feb 2009 12:36:51 +0800 Subject: USB: cdc-acm: add usb id for motomagx phones The Motorola MOTOMAGX phones (Z6, E8, Zn5 so far) are providing combined ACM/BLAN USB configuration. Since it has Vendor Specific class, the corresponding drivers (cdc-acm, zaurus) can't find it just by interface info. This patch adds usb id so the cdc-acm driver can properly handle this combined device. Signed-off-by: Dmitriy Taychenachev Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 326dd7f..00cba28 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1376,6 +1376,8 @@ static struct usb_device_id acm_ids[] = { { USB_DEVICE(0x0572, 0x1324), /* Conexant USB MODEM RD02-D400 */ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ }, + { USB_DEVICE(0x22b8, 0x6425), /* Motorola MOTOMAGX phones */ + }, /* control interfaces with various AT-command sets */ { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, -- cgit v1.1 From 5d7a4755d53a5305d05d836d87ef7c9ff94d6fa7 Mon Sep 17 00:00:00 2001 From: Patrik Kullman Date: Tue, 24 Feb 2009 13:38:53 -0800 Subject: USB: serial: add support for second revision of Ericsson F3507G WWAN card I noticed that my revision of the F3507G WWAN card isn't listed in drivers/usb/serial/option.c Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index c454b52..b7c132b 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -294,7 +294,8 @@ static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *po /* Ericsson products */ #define ERICSSON_VENDOR_ID 0x0bdb -#define ERICSSON_PRODUCT_F3507G 0x1900 +#define ERICSSON_PRODUCT_F3507G_1 0x1900 +#define ERICSSON_PRODUCT_F3507G_2 0x1902 #define BENQ_VENDOR_ID 0x04a5 #define BENQ_PRODUCT_H10 0x4068 @@ -512,7 +513,8 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF626) }, { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) }, { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) }, - { USB_DEVICE(ERICSSON_VENDOR_ID, ERICSSON_PRODUCT_F3507G) }, + { USB_DEVICE(ERICSSON_VENDOR_ID, ERICSSON_PRODUCT_F3507G_1) }, + { USB_DEVICE(ERICSSON_VENDOR_ID, ERICSSON_PRODUCT_F3507G_2) }, { USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) }, { USB_DEVICE(0x1da5, 0x4515) }, /* BenQ H20 */ { } /* Terminating entry */ -- cgit v1.1 From c332b4e1bfd56fe9028d8ef9708cb06179dd1a23 Mon Sep 17 00:00:00 2001 From: Adam Richter Date: Wed, 18 Feb 2009 16:17:15 -0800 Subject: USB: Quirk for Hummingbird huc56s / Conexant ACM modem Signed-off-by: Adam J. Richter Cc: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 00cba28..b3d5a23 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1378,6 +1378,13 @@ static struct usb_device_id acm_ids[] = { }, { USB_DEVICE(0x22b8, 0x6425), /* Motorola MOTOMAGX phones */ }, + { USB_DEVICE(0x0572, 0x1329), /* Hummingbird huc56s (Conexant) */ + .driver_info = NO_UNION_NORMAL, /* union descriptor misplaced on + data interface instead of + communications interface. + Maybe we should define a new + quirk for this. */ + }, /* control interfaces with various AT-command sets */ { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, -- cgit v1.1 From 5126a2674ddac0804450f59da25a058cca629d38 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 23 Feb 2009 12:02:05 -0500 Subject: USB: usb-storage: add IGNORE_RESIDUE flag for Genesys Logic adapters This patch (as1219) adds the IGNORE_RESIDUE flag to the unusual_devs entries for Genesys Logic's USB-IDE adapter. Although this device usually gets the residue correct, there is one command crucial to the operation of CD and DVD drives which it messes up. Tested-by: Mike Lampard Signed-off-by: Alan Stern Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 50dc33a..6f59c8e 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -907,13 +907,13 @@ UNUSUAL_DEV( 0x05e3, 0x0701, 0x0000, 0xffff, "Genesys Logic", "USB to IDE Optical", US_SC_DEVICE, US_PR_DEVICE, NULL, - US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 ), + US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 | US_FL_IGNORE_RESIDUE ), UNUSUAL_DEV( 0x05e3, 0x0702, 0x0000, 0xffff, "Genesys Logic", "USB to IDE Disk", US_SC_DEVICE, US_PR_DEVICE, NULL, - US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 ), + US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 | US_FL_IGNORE_RESIDUE ), /* Reported by Ben Efros */ UNUSUAL_DEV( 0x05e3, 0x0723, 0x9451, 0x9451, -- cgit v1.1 From ce459ec1d278b19be8e0719dbfd47dd1d6687bfb Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 24 Feb 2009 16:19:47 -0500 Subject: USB: g_file_storage: automatically disable stalls under Atmel This patch (as1220) automatically disables stalls when g_file_storage finds itself running with an Atmel device controller, because the Atmel hardware/driver isn't capable of halting bulk endpoints correctly. Reported-by: Stanislaw Gruszka Signed-off-by: Alan Stern Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/file_storage.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c index b10fa31..1ab9dac 100644 --- a/drivers/usb/gadget/file_storage.c +++ b/drivers/usb/gadget/file_storage.c @@ -3879,7 +3879,11 @@ static int __init check_parameters(struct fsg_dev *fsg) mod_data.protocol_type = USB_SC_SCSI; mod_data.protocol_name = "Transparent SCSI"; - if (gadget_is_sh(fsg->gadget)) + /* Some peripheral controllers are known not to be able to + * halt bulk endpoints correctly. If one of them is present, + * disable stalls. + */ + if (gadget_is_sh(fsg->gadget) || gadget_is_at91(fsg->gadget)) mod_data.can_stall = 0; if (mod_data.release == 0xffff) { // Parameter wasn't set -- cgit v1.1 From 54b9ed35aea88b05d711884a3c2dc21bba047bd8 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Wed, 11 Feb 2009 22:31:12 -0800 Subject: USB: gadget: fix build error in omap_apollon_2420_defconfig In apollon case, it only used udc, so udc configuration should select USB_OTG_UTILS also. Signed-off-by: Kyungmin Park Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/Kconfig | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 3219d13..e55fef5 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -191,6 +191,7 @@ config USB_GADGET_OMAP boolean "OMAP USB Device Controller" depends on ARCH_OMAP select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_H4_OTG + select USB_OTG_UTILS if ARCH_OMAP help Many Texas Instruments OMAP processors have flexible full speed USB device controllers, with support for up to 30 -- cgit v1.1 From 67f5a4ba9741fcef3f4db3509ad03565d9e33af2 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Fri, 20 Feb 2009 16:33:08 -0500 Subject: USB: usb_get_string should check the descriptor type This patch (as1218) fixes a problem with a radio-control joystick used in the "walkera 4#3" helicopter. This device responds to the initial Get-String-Descriptor request for string 0 (which is really the list of supported languages) by sending its config descriptor! The usb_get_string() routine needs to check whether it got the right type of descriptor. Oddly enough, this sort of check is already present in usb_get_descriptor(). The patch changes the error code from -EPROTO to -ENODATA, because -EPROTO shows up in so many other contexts to indicate a hardware failure rather than a firmware error. Signed-off-by: Alan Stern Tested-by: Guillermo Jarabo Cc: stable Signed-off-by: Greg Kroah-Hartman =================================================================== --- drivers/usb/core/message.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 31fb204..49e7f56 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -653,7 +653,7 @@ int usb_get_descriptor(struct usb_device *dev, unsigned char type, if (result <= 0 && result != -ETIMEDOUT) continue; if (result > 1 && ((u8 *)buf)[1] != type) { - result = -EPROTO; + result = -ENODATA; continue; } break; @@ -696,8 +696,13 @@ static int usb_get_string(struct usb_device *dev, unsigned short langid, USB_REQ_GET_DESCRIPTOR, USB_DIR_IN, (USB_DT_STRING << 8) + index, langid, buf, size, USB_CTRL_GET_TIMEOUT); - if (!(result == 0 || result == -EPIPE)) - break; + if (result == 0 || result == -EPIPE) + continue; + if (result > 1 && ((u8 *) buf)[1] != USB_DT_STRING) { + result = -ENODATA; + continue; + } + break; } return result; } -- cgit v1.1 From 34f32c9701013ac5af89b82a6ae285e790b643e7 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Fri, 20 Feb 2009 13:45:17 -0800 Subject: usb: musb: make Davinci *work* in mainline Now that the musb build fixes for DaVinci got merged (RC3?), kick in the other bits needed to get it finally *working* in mainline: - Use clk_enable()/clk_disable() ... the "always enable USB clocks" code this originally relied on has since been removed. - Initialize the USB device only after the relevant I2C GPIOs are available, so the host side can properly enable VBUS. - Tweak init sequencing to cope with mainline's relatively late init of the I2C system bus for power switches, transceivers, and so on. Sanity tested on DM6664 EVM for host and peripheral modes; that system won't boot with CONFIG_PM enabled, so OTG can't yet be tested. Also verified on OMAP3. (Unrelated: correct the MODULE_PARM_DESC spelling of musb_debug.) Signed-off-by: David Brownell Cc: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/davinci.c | 15 ++++----------- drivers/usb/musb/musb_core.c | 8 ++++---- 2 files changed, 8 insertions(+), 15 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c index 5a8fd5d..2dc7606 100644 --- a/drivers/usb/musb/davinci.c +++ b/drivers/usb/musb/davinci.c @@ -377,18 +377,8 @@ int __init musb_platform_init(struct musb *musb) u32 revision; musb->mregs += DAVINCI_BASE_OFFSET; -#if 0 - /* REVISIT there's something odd about clocking, this - * didn't appear do the job ... - */ - musb->clock = clk_get(pDevice, "usb"); - if (IS_ERR(musb->clock)) - return PTR_ERR(musb->clock); - status = clk_enable(musb->clock); - if (status < 0) - return -ENODEV; -#endif + clk_enable(musb->clock); /* returns zero if e.g. not clocked */ revision = musb_readl(tibase, DAVINCI_USB_VERSION_REG); @@ -453,5 +443,8 @@ int musb_platform_exit(struct musb *musb) } phy_off(); + + clk_disable(musb->clock); + return 0; } diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 2cc34fa..b120fdc 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -115,7 +115,7 @@ unsigned musb_debug; -module_param(musb_debug, uint, S_IRUGO | S_IWUSR); +module_param_named(debug, musb_debug, uint, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(debug, "Debug message level. Default = 0"); #define DRIVER_AUTHOR "Mentor Graphics, Texas Instruments, Nokia" @@ -2243,10 +2243,10 @@ static int __init musb_init(void) return platform_driver_probe(&musb_driver, musb_probe); } -/* make us init after usbcore and before usb - * gadget and host-side drivers start to register +/* make us init after usbcore and i2c (transceivers, regulators, etc) + * and before usb gadget and host-side drivers start to register */ -subsys_initcall(musb_init); +fs_initcall(musb_init); static void __exit musb_cleanup(void) { -- cgit v1.1 From c2c963217bb1e8d53622d41b9e9ae706d0d02c07 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Sat, 21 Feb 2009 15:29:42 -0800 Subject: USB: musb: be careful with 64K+ transfer lengths (gadget side) request->actual is an unsigned and we should use the same variable type for fifo_count otherwise we might lose some data if request->length >= 64kbytes. [ dbrownell@users.sourceforge.net: fix compiler warning ] Signed-off-by: Felipe Balbi Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_gadget.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 4ea3053..c7ebd08 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -575,7 +575,7 @@ static void rxstate(struct musb *musb, struct musb_request *req) struct usb_request *request = &req->request; struct musb_ep *musb_ep = &musb->endpoints[epnum].ep_out; void __iomem *epio = musb->endpoints[epnum].regs; - u16 fifo_count = 0; + unsigned fifo_count = 0; u16 len = musb_ep->packet_sz; csr = musb_readw(epio, MUSB_RXCSR); @@ -687,7 +687,7 @@ static void rxstate(struct musb *musb, struct musb_request *req) len, fifo_count, musb_ep->packet_sz); - fifo_count = min(len, fifo_count); + fifo_count = min_t(unsigned, len, fifo_count); #ifdef CONFIG_USB_TUSB_OMAP_DMA if (tusb_dma_omap() && musb_ep->dma) { -- cgit v1.1 From b7bdcb79de6de32e40dcc85a5e8c669bec2483d5 Mon Sep 17 00:00:00 2001 From: Dmitry Krivoschekov Date: Sat, 21 Feb 2009 15:30:15 -0800 Subject: USB: musb: fix musb_host_tx() for shared endpoint FIFO The input queue should be used for TX on endpoints which share FIFO hardware. The host TX path wasn't doing that. Shared FIFOs are most often configured for periodic endpoints, which are mostly used for RX/IN transfers ... that's probably how this bug managed to linger for a long time. [ dbrownell@users.sourceforge.net: update patch description ] Signed-off-by: Dmitry Krivoschekov Signed-off-by: Sergei Shtylyov Acked-by: David Brownell Cc: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_host.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index a035cec..b47ca94 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -1161,7 +1161,8 @@ void musb_host_tx(struct musb *musb, u8 epnum) struct urb *urb; struct musb_hw_ep *hw_ep = musb->endpoints + epnum; void __iomem *epio = hw_ep->regs; - struct musb_qh *qh = hw_ep->out_qh; + struct musb_qh *qh = hw_ep->is_shared_fifo ? hw_ep->in_qh + : hw_ep->out_qh; u32 status = 0; void __iomem *mbase = musb->mregs; struct dma_channel *dma; -- cgit v1.1 From a2fd814e6a9e172f7077b68a2a9391bbde777a92 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sat, 21 Feb 2009 15:30:45 -0800 Subject: USB: musb: fix urb_dequeue() method The urb_dequeue() method forgets to unlink 'struct musb_qh' from the control or bulk schedules when the URB being cancelled is the only one queued to its endpoint. That will cause musb_advance_schedule() to block once it reaches 'struct musb_qh' with now empty URB list, so URBs queued for other endpoints after the one being dequeued will not be served. Fix by unlinking the QH from the list except when it's already being handled (typically by musb_giveback). Since a QH with an empty URB list is now supposed to be freed, do that. And remove a now-useless check from musb_advance_schedule(). [ dbrownell@users.sourceforge.net: update patch description, and fold in a dequeue() comment patch ] Signed-off-by: Sergei Shtylyov Signed-off-by: David Brownell Cc: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_host.c | 15 ++++++++++++--- 1 file changed, 12 insertions(+), 3 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index b47ca94..e323239 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -432,7 +432,7 @@ musb_advance_schedule(struct musb *musb, struct urb *urb, else qh = musb_giveback(qh, urb, urb->status); - if (qh && qh->is_ready && !list_empty(&qh->hep->urb_list)) { + if (qh != NULL && qh->is_ready) { DBG(4, "... next ep%d %cX urb %p\n", hw_ep->epnum, is_in ? 'R' : 'T', next_urb(qh)); @@ -2038,9 +2038,9 @@ static int musb_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) goto done; /* Any URB not actively programmed into endpoint hardware can be - * immediately given back. Such an URB must be at the head of its + * immediately given back; that's any URB not at the head of an * endpoint queue, unless someday we get real DMA queues. And even - * then, it might not be known to the hardware... + * if it's at the head, it might not be known to the hardware... * * Otherwise abort current transfer, pending dma, etc.; urb->status * has already been updated. This is a synchronous abort; it'd be @@ -2079,6 +2079,15 @@ static int musb_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) qh->is_ready = 0; __musb_giveback(musb, urb, 0); qh->is_ready = ready; + + /* If nothing else (usually musb_giveback) is using it + * and its URB list has emptied, recycle this qh. + */ + if (ready && list_empty(&qh->hep->urb_list)) { + qh->hep->hcpriv = NULL; + list_del(&qh->ring); + kfree(qh); + } } else ret = musb_cleanup_urb(urb, qh, urb->pipe & USB_DIR_IN); done: -- cgit v1.1 From dc61d238b8c850c34632ae1fbbdea529f8c41d16 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sat, 21 Feb 2009 15:31:01 -0800 Subject: USB: musb: host endpoint_disable() oops fixes The musb_h_disable() routine can oops in some cases: - It's not safe to read hep->hcpriv outside musb->lock, since it gets changed on completion IRQ paths. - The list iterators aren't safe to use in that way; just remove the first element while !list_empty(), so deletions on other code paths can't make trouble. We need two "scrub the list" loops because only one branch should touch hardware and advance the schedule. [ dbrownell@users.sourceforge.net: massively simplify patch description; add key points as code comments ] Signed-off-by: Sergei Shtylyov Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_host.c | 36 ++++++++++++++++++++++++++---------- 1 file changed, 26 insertions(+), 10 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index e323239..c74ebad 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -2103,15 +2103,16 @@ musb_h_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep) unsigned long flags; struct musb *musb = hcd_to_musb(hcd); u8 is_in = epnum & USB_DIR_IN; - struct musb_qh *qh = hep->hcpriv; - struct urb *urb, *tmp; + struct musb_qh *qh; + struct urb *urb; struct list_head *sched; - if (!qh) - return; - spin_lock_irqsave(&musb->lock, flags); + qh = hep->hcpriv; + if (qh == NULL) + goto exit; + switch (qh->type) { case USB_ENDPOINT_XFER_CONTROL: sched = &musb->control; @@ -2145,13 +2146,28 @@ musb_h_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep) /* cleanup */ musb_cleanup_urb(urb, qh, urb->pipe & USB_DIR_IN); - } else - urb = NULL; - /* then just nuke all the others */ - list_for_each_entry_safe_from(urb, tmp, &hep->urb_list, urb_list) - musb_giveback(qh, urb, -ESHUTDOWN); + /* Then nuke all the others ... and advance the + * queue on hw_ep (e.g. bulk ring) when we're done. + */ + while (!list_empty(&hep->urb_list)) { + urb = next_urb(qh); + urb->status = -ESHUTDOWN; + musb_advance_schedule(musb, urb, qh->hw_ep, is_in); + } + } else { + /* Just empty the queue; the hardware is busy with + * other transfers, and since !qh->is_ready nothing + * will activate any of these as it advances. + */ + while (!list_empty(&hep->urb_list)) + __musb_giveback(musb, next_urb(qh), -ESHUTDOWN); + hep->hcpriv = NULL; + list_del(&qh->ring); + kfree(qh); + } +exit: spin_unlock_irqrestore(&musb->lock, flags); } -- cgit v1.1 From 51d9f3e100a8f8cc2be89d5f13d37de61e2da38a Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sat, 21 Feb 2009 15:31:13 -0800 Subject: USB: musb: fix data toggle saving with shared FIFO For some strange reason the host side musb_giveback() decides that it's always got an IN transfer when the hardware endpoint is using a shared FIFO. This causes musb_save_toggle() to read the toggle state from the RXCSR register instead of TXCSR, and may also cause unneeded reloading of RX endpoint registers. Signed-off-by: Sergei Shtylyov Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_host.c | 7 +------ 1 file changed, 1 insertion(+), 6 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index c74ebad..fc79e76 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -335,16 +335,11 @@ musb_save_toggle(struct musb_hw_ep *ep, int is_in, struct urb *urb) static struct musb_qh * musb_giveback(struct musb_qh *qh, struct urb *urb, int status) { - int is_in; struct musb_hw_ep *ep = qh->hw_ep; struct musb *musb = ep->musb; + int is_in = usb_pipein(urb->pipe); int ready = qh->is_ready; - if (ep->is_shared_fifo) - is_in = 1; - else - is_in = usb_pipein(urb->pipe); - /* save toggle eagerly, for paranoia */ switch (qh->type) { case USB_ENDPOINT_XFER_BULK: -- cgit v1.1 From 3ecdb9acf343bbcf2bb2c287dc524ab709cfad7e Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sat, 21 Feb 2009 15:31:23 -0800 Subject: USB: musb: be careful with 64K+ transfer lengths, host side Feeding 32-bit length cast down to 'u16' to min() to calculate the FIFO count in musb_host_tx() risks sending a short packet prematurely for transfer sizes over 64 KB. Similarly, although data transfer size shouldn't exceed 65535 bytes for the control endpoint, making musb_h_ep0_continue() more robust WRT URBs with possibly oversized buffer will not hurt either... Signed-off-by: Sergei Shtylyov Signed-off-by: David Brownell Cc: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_host.c | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index fc79e76..23d3890 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -937,8 +937,8 @@ static bool musb_h_ep0_continue(struct musb *musb, u16 len, struct urb *urb) switch (musb->ep0_stage) { case MUSB_EP0_IN: fifo_dest = urb->transfer_buffer + urb->actual_length; - fifo_count = min(len, ((u16) (urb->transfer_buffer_length - - urb->actual_length))); + fifo_count = min_t(size_t, len, urb->transfer_buffer_length - + urb->actual_length); if (fifo_count < len) urb->status = -EOVERFLOW; @@ -971,10 +971,9 @@ static bool musb_h_ep0_continue(struct musb *musb, u16 len, struct urb *urb) } /* FALLTHROUGH */ case MUSB_EP0_OUT: - fifo_count = min(qh->maxpacket, ((u16) - (urb->transfer_buffer_length - - urb->actual_length))); - + fifo_count = min_t(size_t, qh->maxpacket, + urb->transfer_buffer_length - + urb->actual_length); if (fifo_count) { fifo_dest = (u8 *) (urb->transfer_buffer + urb->actual_length); @@ -1304,7 +1303,8 @@ void musb_host_tx(struct musb *musb, u8 epnum) * packets before updating TXCSR ... other docs disagree ... */ /* PIO: start next packet in this URB */ - wLength = min(qh->maxpacket, (u16) wLength); + if (wLength > qh->maxpacket) + wLength = qh->maxpacket; musb_write_fifo(hw_ep, wLength, buf); qh->segsize = wLength; -- cgit v1.1 From 136733d6124a152ed2b61c3d38008c6581fc8685 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Sat, 21 Feb 2009 15:31:35 -0800 Subject: USB: musb: use right poll limit for low speed devices Remove wrongly applied upper limit on the interrupt transfer interval for low speed devices (not much of an error per se, according to USB specs). Signed-off-by: Sergei Shtylyov Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_host.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 23d3890..6dbbd07 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -1863,19 +1863,21 @@ static int musb_urb_enqueue( } qh->type_reg = type_reg; - /* precompute rxinterval/txinterval register */ - interval = min((u8)16, epd->bInterval); /* log encoding */ + /* Precompute RXINTERVAL/TXINTERVAL register */ switch (qh->type) { case USB_ENDPOINT_XFER_INT: - /* fullspeed uses linear encoding */ - if (USB_SPEED_FULL == urb->dev->speed) { - interval = epd->bInterval; - if (!interval) - interval = 1; + /* + * Full/low speeds use the linear encoding, + * high speed uses the logarithmic encoding. + */ + if (urb->dev->speed <= USB_SPEED_FULL) { + interval = max_t(u8, epd->bInterval, 1); + break; } /* FALLTHROUGH */ case USB_ENDPOINT_XFER_ISOC: - /* iso always uses log encoding */ + /* ISO always uses logarithmic encoding */ + interval = min_t(u8, epd->bInterval, 16); break; default: /* REVISIT we actually want to use NAK limits, hinting to the -- cgit v1.1 From 5c23c9078f8e3476982409b1075b54c8cd65e82c Mon Sep 17 00:00:00 2001 From: Anand Gadiyar Date: Sat, 21 Feb 2009 15:31:40 -0800 Subject: USB: musb: resume suspended root hub on disconnect If this is not done, khubd will not be informed of the disconnect and will assume the device is still there. Easily seen when a hub is connected with no device attached to it; it will autosuspend. When the hub is disconnected, it still shows up in /proc/bus/usb/devices Signed-off-by: Anand Gadiyar Acked-by: Felipe Balbi Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_core.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/usb') diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index b120fdc..60cbaec 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -767,6 +767,7 @@ static irqreturn_t musb_stage2_irq(struct musb *musb, u8 int_usb, #ifdef CONFIG_USB_MUSB_HDRC_HCD case OTG_STATE_A_HOST: case OTG_STATE_A_SUSPEND: + usb_hcd_resume_root_hub(musb_to_hcd(musb)); musb_root_disconnect(musb); if (musb->a_wait_bcon != 0) musb_platform_try_idle(musb, jiffies -- cgit v1.1 From e747951240b9f820b94fd5582663c66d798c8fd1 Mon Sep 17 00:00:00 2001 From: Vikram Pandita Date: Sat, 21 Feb 2009 15:31:44 -0800 Subject: USB: musb: fix srp sysfs entry deletion The SRP sysfs attribute is dependent on gadget mode; any gadget may support SRP. But "rmmod musb_hdrc" didn't remove that attribute; fix. Signed-off-by: Vikram Pandita Acked-by: Felipe Balbi Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 60cbaec..af77e46 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1816,7 +1816,7 @@ static void musb_free(struct musb *musb) #ifdef CONFIG_SYSFS device_remove_file(musb->controller, &dev_attr_mode); device_remove_file(musb->controller, &dev_attr_vbus); -#ifdef CONFIG_USB_MUSB_OTG +#ifdef CONFIG_USB_GADGET_MUSB_HDRC device_remove_file(musb->controller, &dev_attr_srp); #endif #endif @@ -2064,7 +2064,7 @@ fail2: #ifdef CONFIG_SYSFS device_remove_file(musb->controller, &dev_attr_mode); device_remove_file(musb->controller, &dev_attr_vbus); -#ifdef CONFIG_USB_MUSB_OTG +#ifdef CONFIG_USB_GADGET_MUSB_HDRC device_remove_file(musb->controller, &dev_attr_srp); #endif #endif -- cgit v1.1 From 4c3f450ba4e4c00df91f98664b58f9a98dc049fd Mon Sep 17 00:00:00 2001 From: Kuninori Morimoto Date: Thu, 12 Mar 2009 08:40:15 +0000 Subject: sh: Add OHCI USB support for SH7786 Signed-off-by: Kuninori Morimoto Signed-off-by: Paul Mundt --- drivers/usb/Kconfig | 1 + drivers/usb/host/ohci-hcd.c | 3 ++- 2 files changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 83babb0..c6c816b 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -47,6 +47,7 @@ config USB_ARCH_HAS_OHCI default y if CPU_SUBTYPE_SH7720 default y if CPU_SUBTYPE_SH7721 default y if CPU_SUBTYPE_SH7763 + default y if CPU_SUBTYPE_SH7786 # more: default PCI diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 5cf5f1e..7658589 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -1049,7 +1049,8 @@ MODULE_LICENSE ("GPL"); #if defined(CONFIG_CPU_SUBTYPE_SH7720) || \ defined(CONFIG_CPU_SUBTYPE_SH7721) || \ - defined(CONFIG_CPU_SUBTYPE_SH7763) + defined(CONFIG_CPU_SUBTYPE_SH7763) || \ + defined(CONFIG_CPU_SUBTYPE_SH7786) #include "ohci-sh.c" #define PLATFORM_DRIVER ohci_hcd_sh_driver #endif -- cgit v1.1 From db1dd4d376134eba0e08af523b61cc566a4ea1cd Mon Sep 17 00:00:00 2001 From: Jonathan Corbet Date: Fri, 6 Feb 2009 15:25:24 -0700 Subject: Use f_lock to protect f_flags Traditionally, changes to struct file->f_flags have been done under BKL protection, or with no protection at all. This patch causes all f_flags changes after file open/creation time to be done under protection of f_lock. This allows the removal of some BKL usage and fixes a number of longstanding (if microscopic) races. Reviewed-by: Christoph Hellwig Cc: Al Viro Signed-off-by: Jonathan Corbet --- drivers/usb/gadget/file_storage.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c index 1ab9dac..33bb76c 100644 --- a/drivers/usb/gadget/file_storage.c +++ b/drivers/usb/gadget/file_storage.c @@ -1711,7 +1711,9 @@ static int do_write(struct fsg_dev *fsg) curlun->sense_data = SS_WRITE_PROTECTED; return -EINVAL; } + spin_lock(&curlun->filp->f_lock); curlun->filp->f_flags &= ~O_SYNC; // Default is not to wait + spin_unlock(&curlun->filp->f_lock); /* Get the starting Logical Block Address and check that it's * not too big */ @@ -1728,8 +1730,11 @@ static int do_write(struct fsg_dev *fsg) curlun->sense_data = SS_INVALID_FIELD_IN_CDB; return -EINVAL; } - if (fsg->cmnd[1] & 0x08) // FUA + if (fsg->cmnd[1] & 0x08) { // FUA + spin_lock(&curlun->filp->f_lock); curlun->filp->f_flags |= O_SYNC; + spin_unlock(&curlun->filp->f_lock); + } } if (lba >= curlun->num_sectors) { curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE; -- cgit v1.1 From 5b10916ea0a62920204517e1c4ce14560b4f96ab Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 10 Mar 2009 20:42:55 -0700 Subject: USB: usbtmc: fix stupid bug in open() open() will never succeed, as we always return -ENODEV. Fix this obvious bug. Thanks to Jouni Ryno for reporting it. Reported-by: Jouni Ryno Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/usbtmc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c index 0f5c05f..895a098 100644 --- a/drivers/usb/class/usbtmc.c +++ b/drivers/usb/class/usbtmc.c @@ -106,12 +106,13 @@ static int usbtmc_open(struct inode *inode, struct file *filp) { struct usb_interface *intf; struct usbtmc_device_data *data; - int retval = -ENODEV; + int retval = 0; intf = usb_find_interface(&usbtmc_driver, iminor(inode)); if (!intf) { printk(KERN_ERR KBUILD_MODNAME ": can not find device for minor %d", iminor(inode)); + retval = -ENODEV; goto exit; } -- cgit v1.1 From 228dd05dbfdd0fced8ab1a28ed73b500ba6bb0a6 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 11 Mar 2009 13:51:42 -0700 Subject: USB: usbtmc: add protocol 1 support MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The driver already supports the 1 protocol support, so just add it to the MODULE_DEVICE_TABLE entry so it properly picks up these devices. Thanks to Jouni Rynö for pointing this out. Reported-by: Jouni Ryno Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/usbtmc.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/usb') diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c index 895a098..c40a9b2 100644 --- a/drivers/usb/class/usbtmc.c +++ b/drivers/usb/class/usbtmc.c @@ -50,6 +50,7 @@ static struct usb_device_id usbtmc_devices[] = { { USB_INTERFACE_INFO(USB_CLASS_APP_SPEC, 3, 0), }, + { USB_INTERFACE_INFO(USB_CLASS_APP_SPEC, 3, 1), }, { 0, } /* terminating entry */ }; MODULE_DEVICE_TABLE(usb, usbtmc_devices); -- cgit v1.1 From 6ff10464096540e14d7575a72c50d0316d003714 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 9 Mar 2009 13:44:02 -0400 Subject: USB: usbfs: keep async URBs until the device file is closed The usbfs driver manages a list of completed asynchronous URBs. But it is too eager to free the entries on this list: destroy_async() gets called whenever an interface is unbound or a device is removed, and it deallocates the outstanding struct async entries for all URBs on that interface or device. This is wrong; the user program should be able to reap an URB any time after it has completed, regardless of whether or not the interface is still bound or the device is still present. This patch (as1222) moves the code for deallocating the completed list entries from destroy_async() to usbdev_release(). The outstanding entries won't be freed until the user program has closed the device file, thereby eliminating any possibility that the remaining URBs might still be reaped. This fixes a bug in which a program can hang in the USBDEVFS_REAPURB ioctl when the device is unplugged. Reported-and-tested-by: Martin Poupe Signed-off-by: Alan Stern Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/devio.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 7513bb0..6585f52 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -359,11 +359,6 @@ static void destroy_async(struct dev_state *ps, struct list_head *list) spin_lock_irqsave(&ps->lock, flags); } spin_unlock_irqrestore(&ps->lock, flags); - as = async_getcompleted(ps); - while (as) { - free_async(as); - as = async_getcompleted(ps); - } } static void destroy_async_on_interface(struct dev_state *ps, @@ -643,6 +638,7 @@ static int usbdev_release(struct inode *inode, struct file *file) struct dev_state *ps = file->private_data; struct usb_device *dev = ps->dev; unsigned int ifnum; + struct async *as; usb_lock_device(dev); @@ -661,6 +657,12 @@ static int usbdev_release(struct inode *inode, struct file *file) usb_unlock_device(dev); usb_put_dev(dev); put_pid(ps->disc_pid); + + as = async_getcompleted(ps); + while (as) { + free_async(as); + as = async_getcompleted(ps); + } kfree(ps); return 0; } -- cgit v1.1 From 7f82b6dd7015aabca2fd55fb690248f742cd67f3 Mon Sep 17 00:00:00 2001 From: Axel Wachtler Date: Thu, 5 Mar 2009 14:09:22 -0800 Subject: USB: serial: add FTDI USB/Serial converter devices Add the following devices to the USB FTDI SIO device table: Bus 001 Device 009: ID 03eb:2109 Atmel Corp. http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4187 Bus 001 Device 008: ID 1cf1:0001 http://www.dresden-elektronik.de/shop/prod75.html Bus 001 Device 007: ID 1c1f:0004 http://www.dresden-elektronik.de/shop/prod64.html Signed-off-by: Axel Wachtler Signed-off-by: Robert Richter Signed-off-by: Andrew Morton Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 3 +++ drivers/usb/serial/ftdi_sio.h | 13 +++++++++++++ 2 files changed, 16 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index f92f4d7..f773392 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -663,6 +663,9 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) }, { USB_DEVICE(FTDI_VID, DIEBOLD_BCS_SE923_PID) }, { USB_DEVICE(FTDI_VID, FTDI_NDI_HUC_PID) }, + { USB_DEVICE(ATMEL_VID, STK541_PID) }, + { USB_DEVICE(DE_VID, STB_PID) }, + { USB_DEVICE(DE_VID, WHT_PID) }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index e300c84..f2745ed 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -893,6 +893,19 @@ #define DIEBOLD_BCS_SE923_PID 0xfb99 /* + * Atmel STK541 + */ +#define ATMEL_VID 0x03eb /* Vendor ID */ +#define STK541_PID 0x2109 /* Zigbee Controller */ + +/* + * Dresden Elektronic Sensor Terminal Board + */ +#define DE_VID 0x1cf1 /* Vendor ID */ +#define STB_PID 0x0001 /* Sensor Terminal Board */ +#define WHT_PID 0x0004 /* Wireless Handheld Terminal */ + +/* * BmRequestType: 1100 0000b * bRequest: FTDI_E2_READ * wValue: 0 -- cgit v1.1 From b0d659002168146ec6b03d1ef062d8dcf05ff510 Mon Sep 17 00:00:00 2001 From: Michael Hennerich Date: Fri, 6 Mar 2009 14:07:43 -0800 Subject: USB: serial: ftdi: enable UART detection on gnICE JTAG adaptors blacklist interface0 Signed-off-by: Michael Hennerich Signed-off-by: Bryan Wu Signed-off-by: Andrew Morton Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 2 ++ drivers/usb/serial/ftdi_sio.h | 7 +++++++ 2 files changed, 9 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index f773392..ae84c32 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -666,6 +666,8 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(ATMEL_VID, STK541_PID) }, { USB_DEVICE(DE_VID, STB_PID) }, { USB_DEVICE(DE_VID, WHT_PID) }, + { USB_DEVICE(ADI_VID, ADI_GNICE_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index f2745ed..daaf63d 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -906,6 +906,13 @@ #define WHT_PID 0x0004 /* Wireless Handheld Terminal */ /* + * Blackfin gnICE JTAG + * http://docs.blackfin.uclinux.org/doku.php?id=hw:jtag:gnice + */ +#define ADI_VID 0x0456 +#define ADI_GNICE_PID 0xF000 + +/* * BmRequestType: 1100 0000b * bRequest: FTDI_E2_READ * wValue: 0 -- cgit v1.1 From c6535668798b0644e1af5934c2aec0e912280449 Mon Sep 17 00:00:00 2001 From: "Robert M. Kenney" Date: Thu, 26 Feb 2009 14:58:39 -0500 Subject: USB: serial: new cp2101 device id From: Robert M. Kenney Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/cp2101.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index 027f4b7..9b4082b 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -79,6 +79,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */ { USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */ { USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */ + { USB_DEVICE(0x10C4, 0x819F) }, /* MJS USB Toslink Switcher */ { USB_DEVICE(0x10C4, 0x81A6) }, /* ThinkOptics WavIt */ { USB_DEVICE(0x10C4, 0x81AC) }, /* MSD Dash Hawk */ { USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */ -- cgit v1.1 From c497e715f93d148d751c055401568684eea0bf6b Mon Sep 17 00:00:00 2001 From: Jan Dumon Date: Tue, 10 Mar 2009 17:29:47 +0100 Subject: USB: unusual_devs: Add support for GI 0431 SD-Card interface Enable the SD-Card interface on the GI 0431 HSUPA stick from Option. The unusual_devs.h entry is necessary because the device descriptor is vendor-specific. That prevents usb-storage from binding to it as an interface driver. T: Bus=07 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 15 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=ff MxPS=64 #Cfgs= 1 P: Vendor=0af0 ProdID=7501 Rev= 0.00 S: Manufacturer=Option N.V. S: Product=Globetrotter HSUPA Modem C:* #Ifs=11 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=hso E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 2 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=hso E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 4 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=hso E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 7 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=hso E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=08(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 8 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=09(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#= 9 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=hso E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=2ms E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=0a(O) Atr=02(Bulk) MxPS= 512 Ivl=4ms I:* If#=10 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=0b(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=8c(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Jan Dumon Signed-off-by: Phil Dibowitz Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 10 ++++++++++ 1 file changed, 10 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 6f59c8e..bfa8db0d 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1390,6 +1390,16 @@ UNUSUAL_DEV( 0x0af0, 0x7401, 0x0000, 0x0000, US_SC_DEVICE, US_PR_DEVICE, NULL, 0 ), +/* Reported by Jan Dumon + * This device (wrongly) has a vendor-specific device descriptor. + * The entry is needed so usb-storage can bind to it's mass-storage + * interface as an interface driver */ +UNUSUAL_DEV( 0x0af0, 0x7501, 0x0000, 0x0000, + "Option", + "GI 0431 SD-Card", + US_SC_DEVICE, US_PR_DEVICE, NULL, + 0 ), + /* Reported by Ben Efros */ UNUSUAL_DEV( 0x0bc2, 0x3010, 0x0000, 0x0000, "Seagate", -- cgit v1.1 From eeafa64b7a4134da24d48ed944e48541f8171152 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 11 Mar 2009 21:47:36 +0100 Subject: USB: atm/cxacru, fix lock imbalance We do not hold mutex in one place in cxacru_cm, but unlock it on fail path. Fix this. Signed-off-by: Jiri Slaby Cc: Simon Arlott Signed-off-by: Greg Kroah-Hartman --- drivers/usb/atm/cxacru.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c index 5ed4ae0..6789089 100644 --- a/drivers/usb/atm/cxacru.c +++ b/drivers/usb/atm/cxacru.c @@ -485,7 +485,7 @@ static int cxacru_cm(struct cxacru_data *instance, enum cxacru_cm_request cm, usb_err(instance->usbatm, "requested transfer size too large (%d, %d)\n", wbuflen, rbuflen); ret = -ENOMEM; - goto fail; + goto err; } mutex_lock(&instance->cm_serialize); @@ -565,6 +565,7 @@ static int cxacru_cm(struct cxacru_data *instance, enum cxacru_cm_request cm, dbg("cm %#x", cm); fail: mutex_unlock(&instance->cm_serialize); +err: return ret; } -- cgit v1.1 From 909b6c3fc20ea772dc63a03986d74148fcbb1a1d Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 11 Mar 2009 21:47:37 +0100 Subject: USB: image/mdc800, fix lock imbalance There is an omitted unlock in mdc800_usb_probe's fail path. Add it. Signed-off-by: Jiri Slaby Cc: Henning Zabel Signed-off-by: Greg Kroah-Hartman --- drivers/usb/image/mdc800.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/usb') diff --git a/drivers/usb/image/mdc800.c b/drivers/usb/image/mdc800.c index 878c77c..972f20b 100644 --- a/drivers/usb/image/mdc800.c +++ b/drivers/usb/image/mdc800.c @@ -499,6 +499,7 @@ static int mdc800_usb_probe (struct usb_interface *intf, retval = usb_register_dev(intf, &mdc800_class); if (retval) { dev_err(&intf->dev, "Not able to get a minor for this device.\n"); + mutex_unlock(&mdc800->io_lock); return -ENODEV; } -- cgit v1.1 From 46c9844c4014be53c67622dcd3ba4302f36e9cac Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 11 Mar 2009 21:47:38 +0100 Subject: USB: misc/adutux, fix lock imbalance Don't unlock adutux_mutex when not held. Signed-off-by: Jiri Slaby Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/adutux.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/misc/adutux.c b/drivers/usb/misc/adutux.c index 7b6922e..2035265 100644 --- a/drivers/usb/misc/adutux.c +++ b/drivers/usb/misc/adutux.c @@ -376,7 +376,7 @@ static int adu_release(struct inode *inode, struct file *file) if (dev->open_count <= 0) { dbg(1," %s : device not opened", __func__); retval = -ENODEV; - goto exit; + goto unlock; } adu_release_internal(dev); @@ -385,9 +385,9 @@ static int adu_release(struct inode *inode, struct file *file) if (!dev->open_count) /* ... and we're the last user */ adu_delete(dev); } - -exit: +unlock: mutex_unlock(&adutux_mutex); +exit: dbg(2," %s : leave, return value %d", __func__, retval); return retval; } -- cgit v1.1 From a08b43aee46ed4272ad7bee2c785edcf313339b3 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 11 Mar 2009 21:47:39 +0100 Subject: USB: misc/vstusb, fix lock imbalance Make sure we don't leak locked vstdev->lock in vstusb_write. Unlock properly on one fail path. Signed-off-by: Jiri Slaby Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/vstusb.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/usb') diff --git a/drivers/usb/misc/vstusb.c b/drivers/usb/misc/vstusb.c index 63dff9b..f26ea8d 100644 --- a/drivers/usb/misc/vstusb.c +++ b/drivers/usb/misc/vstusb.c @@ -401,6 +401,7 @@ static ssize_t vstusb_write(struct file *file, const char __user *buffer, } if (copy_from_user(buf, buffer, count)) { + mutex_unlock(&vstdev->lock); dev_err(&dev->dev, "%s: can't copy_from_user\n", __func__); retval = -EFAULT; goto exit; -- cgit v1.1 From 49fa09215c03116449184057f062c6aea2f1d0b4 Mon Sep 17 00:00:00 2001 From: Jiri Slaby Date: Wed, 11 Mar 2009 21:47:40 +0100 Subject: USB: wusbcore/wa-xfer, fix lock imbalance Fix locking on one wa_urb_enqueue_b's fail path. There was omitted unlock. Signed-off-by: Jiri Slaby Cc: Inaky Perez-Gonzalez Signed-off-by: Greg Kroah-Hartman --- drivers/usb/wusbcore/wa-xfer.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/wusbcore/wa-xfer.c b/drivers/usb/wusbcore/wa-xfer.c index 238a96a..613a5fc 100644 --- a/drivers/usb/wusbcore/wa-xfer.c +++ b/drivers/usb/wusbcore/wa-xfer.c @@ -921,8 +921,10 @@ static void wa_urb_enqueue_b(struct wa_xfer *xfer) result = -ENODEV; /* FIXME: segmentation broken -- kills DWA */ mutex_lock(&wusbhc->mutex); /* get a WUSB dev */ - if (urb->dev == NULL) + if (urb->dev == NULL) { + mutex_unlock(&wusbhc->mutex); goto error_dev_gone; + } wusb_dev = __wusb_dev_get_by_usb_dev(wusbhc, urb->dev); if (wusb_dev == NULL) { mutex_unlock(&wusbhc->mutex); -- cgit v1.1 From 9ea19b82f3126da4e47d6b94563a3c2cd586f6e2 Mon Sep 17 00:00:00 2001 From: Albert Pauw Date: Sun, 1 Mar 2009 09:37:52 +0100 Subject: USB: option.c: add ZTE 622 modem device Please consider this small patch for the usb option-card driver. This patch adds the ZTE 622 usb modem device. Signed-off-by: Albert Pauw Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index b7c132b..ddd0a0b 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -288,6 +288,7 @@ static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *po /* ZTE PRODUCTS */ #define ZTE_VENDOR_ID 0x19d2 +#define ZTE_PRODUCT_MF622 0x0001 #define ZTE_PRODUCT_MF628 0x0015 #define ZTE_PRODUCT_MF626 0x0031 #define ZTE_PRODUCT_CDMA_TECH 0xfffe @@ -510,6 +511,7 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */ { USB_DEVICE(MAXON_VENDOR_ID, 0x6280) }, /* BP3-USB & BP3-EXT HSDPA */ { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) }, + { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622) }, { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF626) }, { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) }, { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) }, -- cgit v1.1 From 508db8c954d55ed30f870d2c24d741ba6269d13c Mon Sep 17 00:00:00 2001 From: Karsten Wiese Date: Thu, 26 Feb 2009 01:47:48 +0100 Subject: USB: EHCI: Fix isochronous URB leak ehci-hcd uses usb_get_urb() and usb_put_urb() in an unbalanced way causing isochronous URB's kref.counts incrementing once per usb_submit_urb() call. The culprit is *usb being set to NULL when usb_put_urb() is called after URB is given back. Due to other fixes there is no need for ehci-hcd to deal with usb_get_urb() nor usb_put_urb() anymore, so patch removes their usages in ehci-hcd. Patch also makes ehci_to_hcd(ehci)->self.bandwidth_allocated adjust, if a stream finishes. Signed-off-by: Karsten Wiese Cc: David Brownell Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-sched.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index 07bcb93..1d0b49e 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -1536,7 +1536,7 @@ itd_link_urb ( struct ehci_itd, itd_list); list_move_tail (&itd->itd_list, &stream->td_list); itd->stream = iso_stream_get (stream); - itd->urb = usb_get_urb (urb); + itd->urb = urb; itd_init (ehci, stream, itd); } @@ -1645,7 +1645,7 @@ itd_complete ( (void) disable_periodic(ehci); ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs--; - if (unlikely (list_empty (&stream->td_list))) { + if (unlikely(list_is_singular(&stream->td_list))) { ehci_to_hcd(ehci)->self.bandwidth_allocated -= stream->bandwidth; ehci_vdbg (ehci, @@ -1656,7 +1656,6 @@ itd_complete ( iso_stream_put (ehci, stream); done: - usb_put_urb(urb); itd->urb = NULL; if (ehci->clock_frame != itd->frame || itd->index[7] != -1) { /* OK to recycle this ITD now. */ @@ -1949,7 +1948,7 @@ sitd_link_urb ( struct ehci_sitd, sitd_list); list_move_tail (&sitd->sitd_list, &stream->td_list); sitd->stream = iso_stream_get (stream); - sitd->urb = usb_get_urb (urb); + sitd->urb = urb; sitd_patch(ehci, stream, sitd, sched, packet); sitd_link (ehci, (next_uframe >> 3) % ehci->periodic_size, @@ -2034,7 +2033,7 @@ sitd_complete ( (void) disable_periodic(ehci); ehci_to_hcd(ehci)->self.bandwidth_isoc_reqs--; - if (list_empty (&stream->td_list)) { + if (list_is_singular(&stream->td_list)) { ehci_to_hcd(ehci)->self.bandwidth_allocated -= stream->bandwidth; ehci_vdbg (ehci, @@ -2045,7 +2044,6 @@ sitd_complete ( iso_stream_put (ehci, stream); /* OK to recycle this SITD now that its completion callback ran. */ done: - usb_put_urb(urb); sitd->urb = NULL; sitd->stream = NULL; list_move(&sitd->sitd_list, &stream->free_list); -- cgit v1.1 From 391016f6e2fe3b9979b4c6880a76e5e434d6947c Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 16 Mar 2009 14:21:56 -0400 Subject: USB: EHCI: expedite unlinks when the root hub is suspended This patch (as1225) fixes a bug in ehci-hcd. The condition for whether unlinked QHs can become IDLE should not be that the controller is halted, but rather that the controller isn't running. In other words when the root hub is suspended, the hardware doesn't own any QHs. This fixes a problem that can show up during hibernation: If a QH is only partially unlinked when the root hub is frozen, then when the root hub is thawed the QH won't be in the IDLE state. As a result it can't be used properly for new URB submissions. Signed-off-by: Alan Stern Reported-by: Brandon Philips Tested-by: Brandon Philips Acked-by: David Brownell Cc: Stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-q.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index 3712b92..ecc9b66 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -1095,7 +1095,8 @@ static void start_unlink_async (struct ehci_hcd *ehci, struct ehci_qh *qh) prev->qh_next = qh->qh_next; wmb (); - if (unlikely (ehci_to_hcd(ehci)->state == HC_STATE_HALT)) { + /* If the controller isn't running, we don't have to wait for it */ + if (unlikely(!HC_IS_RUNNING(ehci_to_hcd(ehci)->state))) { /* if (unlikely (qh->reclaim != 0)) * this will recurse, probably not much */ -- cgit v1.1 From 0cc6bfe901b946df125d8e37186d8e45f876457d Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Thu, 12 Mar 2009 06:53:00 -0400 Subject: USB: Option: let cdc-acm handle Sony Ericsson F3507g / Dell 5530 The generic cdc-acm driver is now the best one to handle Sony Ericsson F3507g-based devices (which the Dell 5530 is a rebrand of), now that all the pieces are in place (ie, cac477e8f1038c41b6f29d3161ce351462ef3df7). Removing the IDs from option allows cdc-acm to handle the device. Signed-off-by: Dan Williams Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 8 -------- 1 file changed, 8 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index ddd0a0b..3cf765b 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -293,11 +293,6 @@ static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *po #define ZTE_PRODUCT_MF626 0x0031 #define ZTE_PRODUCT_CDMA_TECH 0xfffe -/* Ericsson products */ -#define ERICSSON_VENDOR_ID 0x0bdb -#define ERICSSON_PRODUCT_F3507G_1 0x1900 -#define ERICSSON_PRODUCT_F3507G_2 0x1902 - #define BENQ_VENDOR_ID 0x04a5 #define BENQ_PRODUCT_H10 0x4068 @@ -443,7 +438,6 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5520_MINICARD_CINGULAR) }, /* Dell Wireless HSDPA 5520 == Novatel Expedite EU860D */ { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5520_MINICARD_GENERIC_L) }, /* Dell Wireless HSDPA 5520 */ { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5520_MINICARD_GENERIC_I) }, /* Dell Wireless 5520 Voda I Mobile Broadband (3G HSDPA) Minicard */ - { USB_DEVICE(DELL_VENDOR_ID, 0x8147) }, /* Dell Wireless 5530 Mobile Broadband (3G HSPA) Mini-Card */ { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_SPRINT) }, /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */ { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_TELUS) }, /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */ { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5730_MINICARD_VZW) }, /* Dell Wireless 5730 Mobile Broadband EVDO/HSPA Mini-Card */ @@ -515,8 +509,6 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF626) }, { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) }, { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) }, - { USB_DEVICE(ERICSSON_VENDOR_ID, ERICSSON_PRODUCT_F3507G_1) }, - { USB_DEVICE(ERICSSON_VENDOR_ID, ERICSSON_PRODUCT_F3507G_2) }, { USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) }, { USB_DEVICE(0x1da5, 0x4515) }, /* BenQ H20 */ { } /* Terminating entry */ -- cgit v1.1 From 716a9c8561d9c50ec454f4fbd39a265892feda2c Mon Sep 17 00:00:00 2001 From: Moritz Muehlenhoff Date: Sat, 14 Mar 2009 00:43:21 +0100 Subject: USB: Updated unusual-devs entry for USB mass storage on Nokia 6233 Current firmware revision 5.60 still behaves the same, so update the quirk up a (non-existing) 99.99 revision. http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=493415 Signed-off-by: Moritz Muehlenhoff Tested-by: Jan Heitkoetter Cc: stable Signed-off-by: Phil Dibowitz --- drivers/usb/storage/unusual_devs.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index bfa8db0d..84ca433 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -226,7 +226,7 @@ UNUSUAL_DEV( 0x0421, 0x047c, 0x0370, 0x0610, US_FL_MAX_SECTORS_64 ), /* Reported by Manuel Osdoba */ -UNUSUAL_DEV( 0x0421, 0x0492, 0x0452, 0x0452, +UNUSUAL_DEV( 0x0421, 0x0492, 0x0452, 0x9999, "Nokia", "Nokia 6233", US_SC_DEVICE, US_PR_DEVICE, NULL, -- cgit v1.1 From 56a21827439a4d715b510bfaf488534e6f4ad2f8 Mon Sep 17 00:00:00 2001 From: Dirk Hohndel Date: Sat, 14 Mar 2009 20:47:39 -0700 Subject: USB: Add Vendor/Product ID for new CDMA U727 to option driver * newer versions of the Novatel Wireless U727 CDMA 3G USB stick have a different Product ID (0x5010); adding this ID makes them work just fine with the option driver Signed-off-by: Dirk Hohndel Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 3cf765b..d31fc2b 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -197,6 +197,7 @@ static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *po /* OVATION PRODUCTS */ #define NOVATELWIRELESS_PRODUCT_MC727 0x4100 #define NOVATELWIRELESS_PRODUCT_MC950D 0x4400 +#define NOVATELWIRELESS_PRODUCT_U727 0x5010 /* FUTURE NOVATEL PRODUCTS */ #define NOVATELWIRELESS_PRODUCT_EVDO_FULLSPEED 0X6000 @@ -411,6 +412,7 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EU870D) }, /* Novatel EU850D/EU860D/EU870D */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC950D) }, /* Novatel MC930D/MC950D */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC727) }, /* Novatel MC727/U727/USB727 */ + { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_U727) }, /* Novatel MC727/U727/USB727 */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_FULLSPEED) }, /* Novatel EVDO product */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_HSPA_FULLSPEED) }, /* Novatel HSPA product */ { USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EVDO_EMBEDDED_FULLSPEED) }, /* Novatel EVDO Embedded product */ -- cgit v1.1 From e7f2f0d77a7b483a26054f29ba8393831b25a8a4 Mon Sep 17 00:00:00 2001 From: Achilleas Kotsis Date: Mon, 16 Mar 2009 16:35:02 +0200 Subject: USB: Add device id for Option GTM380 to option driver Option GTM380 in Modem mode uses Product ID 0x7201. This has been tested and works on production systems for over 6 months. Signed-off-by: Achilleas Kotsis Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index d31fc2b..61ebddc4 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -89,6 +89,7 @@ static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *po #define OPTION_PRODUCT_ETNA_MODEM_GT 0x7041 #define OPTION_PRODUCT_ETNA_MODEM_EX 0x7061 #define OPTION_PRODUCT_ETNA_KOI_MODEM 0x7100 +#define OPTION_PRODUCT_GTM380_MODEM 0x7201 #define HUAWEI_VENDOR_ID 0x12D1 #define HUAWEI_PRODUCT_E600 0x1001 @@ -322,6 +323,7 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_GT) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_EX) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_MODEM) }, + { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_GTM380_MODEM) }, { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_Q101) }, { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_Q111) }, { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLX) }, -- cgit v1.1 From 8a0845c51b2e300f5204a323b874f7f58ea0eff7 Mon Sep 17 00:00:00 2001 From: Thomas Bartosik Date: Mon, 16 Mar 2009 16:04:38 +0100 Subject: USB: storage: Unusual USB device Prolific 2507 variation added The "c-enter" USB to Toshiba 1.8" IDE enclosure needs special treatment to work flawlessly. This patch is absolutely trivial, as the integrated USB-IDE bridge is already identified to be an "unusual" device, only the bcdDevice is different (lower) to the bcdDeviceMin already included in the kernel. It is a Prolific 2507 bridge. T: Bus=02 Lev=01 Prnt=01 Port=02 Cnt=01 Dev#= 4 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=067b ProdID=2507 Rev= 0.01 S: Manufacturer=Prolific Technology Inc. S: Product=ATAPI-6 Bridge Controller S: SerialNumber=00000272 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Thomas Bartosik Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/unusual_devs.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 84ca433..cfde74a 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -951,7 +951,9 @@ UNUSUAL_DEV( 0x066f, 0x8000, 0x0001, 0x0001, US_FL_FIX_CAPACITY ), /* Reported by Richard -=[]=- */ -UNUSUAL_DEV( 0x067b, 0x2507, 0x0100, 0x0100, +/* Change to bcdDeviceMin (0x0100 to 0x0001) reported by + * Thomas Bartosik */ +UNUSUAL_DEV( 0x067b, 0x2507, 0x0001, 0x0100, "Prolific Technology Inc.", "Mass Storage Device", US_SC_DEVICE, US_PR_DEVICE, NULL, -- cgit v1.1 From b5556498b60a237cca173dfd60109f3504ce25ca Mon Sep 17 00:00:00 2001 From: Stephen Hemminger Date: Fri, 20 Mar 2009 19:35:59 +0000 Subject: usbnet: convert rndis driver to use dev_get_stats dev_get_stats() handles all issues with net_device_ops Signed-off-by: Stephen Hemminger Acked-by: David Brownell Signed-off-by: David S. Miller --- drivers/usb/gadget/rndis.c | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/rndis.c b/drivers/usb/gadget/rndis.c index d2860a8..2b4660e 100644 --- a/drivers/usb/gadget/rndis.c +++ b/drivers/usb/gadget/rndis.c @@ -170,7 +170,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len, int i, count; rndis_query_cmplt_type *resp; struct net_device *net; - struct net_device_stats *stats; + const struct net_device_stats *stats; if (!r) return -ENOMEM; resp = (rndis_query_cmplt_type *) r->buf; @@ -193,10 +193,7 @@ gen_ndis_query_resp (int configNr, u32 OID, u8 *buf, unsigned buf_len, resp->InformationBufferOffset = cpu_to_le32 (16); net = rndis_per_dev_params[configNr].dev; - if (net->get_stats) - stats = net->get_stats(net); - else - stats = NULL; + stats = dev_get_stats(net); switch (OID) { -- cgit v1.1 From 1662e3a7f076e51e3073faf9ce77157b529c475b Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 18 Mar 2009 14:28:53 -0400 Subject: USB: add quirk to avoid config and interface strings Apparently the Configuration and Interface strings aren't used as often as the Vendor, Product, and Serial strings. In at least one device (a Saitek Cyborg Gold 3D joystick), attempts to read the Configuration string cause the device to stop responding to Control requests. This patch (as1226) adds a quirks flag, telling the kernel not to read a device's Configuration or Interface strings, together with a new quirk for the offending joystick. Reported-by: Melchior FRANZ Tested-by: Melchior FRANZ Signed-off-by: Alan Stern Cc: stable [2.6.28 and 2.6.29, nothing earlier] Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/message.c | 3 ++- drivers/usb/core/quirks.c | 4 ++++ drivers/usb/core/sysfs.c | 4 +++- 3 files changed, 9 insertions(+), 2 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 49e7f56..3922fa9 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1719,7 +1719,8 @@ free_interfaces: } kfree(new_interfaces); - if (cp->string == NULL) + if (cp->string == NULL && + !(dev->quirks & USB_QUIRK_CONFIG_INTF_STRINGS)) cp->string = usb_cache_string(dev, cp->desc.iConfiguration); /* Now that all the interfaces are set up, register them diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index c070b34..ab93918 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -54,6 +54,10 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x0638, 0x0a13), .driver_info = USB_QUIRK_STRING_FETCH_255 }, + /* Saitek Cyborg Gold Joystick */ + { USB_DEVICE(0x06a3, 0x0006), .driver_info = + USB_QUIRK_CONFIG_INTF_STRINGS }, + /* M-Systems Flash Disk Pioneers */ { USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME }, diff --git a/drivers/usb/core/sysfs.c b/drivers/usb/core/sysfs.c index 4cc2456..c667891 100644 --- a/drivers/usb/core/sysfs.c +++ b/drivers/usb/core/sysfs.c @@ -13,6 +13,7 @@ #include #include #include +#include #include "usb.h" /* Active configuration fields */ @@ -813,7 +814,8 @@ int usb_create_sysfs_intf_files(struct usb_interface *intf) if (intf->sysfs_files_created || intf->unregistering) return 0; - if (alt->string == NULL) + if (alt->string == NULL && + !(udev->quirks & USB_QUIRK_CONFIG_INTF_STRINGS)) alt->string = usb_cache_string(udev, alt->desc.iInterface); if (alt->string) retval = device_create_file(&intf->dev, &dev_attr_interface); -- cgit v1.1 From 090b90118207e786d2990310d063fda5d52cce6e Mon Sep 17 00:00:00 2001 From: David Brownell Date: Fri, 20 Mar 2009 01:08:20 -0700 Subject: USB: gadget: fix rndis regression Restore some code that was wrongly dropped from the RNDIS driver, and caused interop problems observed with OpenMoko. The issue is with hardware which needs help conforming to part of the USB 2.0 spec (section 8.5.3.2); some can automagically send a ZLP in response to an unexpected IN, but not all chips will do that. We don't need to check the packet length ourselves the way earlier code did, since the UDC must already check it. But we do need to tell the UDC when it must force a short packet termination of the data stage. (Based on a patch from Aric D. Blumer ) Signed-off-by: David Brownell Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/f_rndis.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c index 3a8bb53..fd7b356 100644 --- a/drivers/usb/gadget/f_rndis.c +++ b/drivers/usb/gadget/f_rndis.c @@ -437,7 +437,7 @@ invalid: DBG(cdev, "rndis req%02x.%02x v%04x i%04x l%d\n", ctrl->bRequestType, ctrl->bRequest, w_value, w_index, w_length); - req->zero = 0; + req->zero = (value < w_length); req->length = value; value = usb_ep_queue(cdev->gadget->ep0, req, GFP_ATOMIC); if (value < 0) -- cgit v1.1 From 5c16034d73da2c1b663aa25dedadbc533b3d811c Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 23 Mar 2009 09:51:02 -0400 Subject: USB: usb-storage: increase max_sectors for tape drives This patch (as1203) increases the max_sector limit for USB tape drives. By default usb-storage sets max_sectors to 240 (i.e., 120 KB) for all devices. But tape drives need a higher limit, since tapes can and do have very large block sizes. Without the ability to transfer an entire large block in a single command, such tapes can't be used. This fixes Bugzilla #12207. Signed-off-by: Alan Stern Reported-and-tested-by: Phil Mitchell Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/scsiglue.c | 6 ++++++ 1 file changed, 6 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index 727c506..ed710bc 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -135,6 +135,12 @@ static int slave_configure(struct scsi_device *sdev) if (sdev->request_queue->max_sectors > max_sectors) blk_queue_max_sectors(sdev->request_queue, max_sectors); + } else if (sdev->type == TYPE_TAPE) { + /* Tapes need much higher max_sector limits, so just + * raise it to the maximum possible (4 GB / 512) and + * let the queue segment size sort out the real limit. + */ + blk_queue_max_sectors(sdev->request_queue, 0x7FFFFF); } /* Some USB host controllers can't do DMA; they have to use PIO. -- cgit v1.1 From dd44be6b17ac52238aa6c7f46b906d9fb76e7052 Mon Sep 17 00:00:00 2001 From: Pete Zaitcev Date: Tue, 6 Jan 2009 17:20:42 -0700 Subject: usblp: continuously poll for status MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The usblp in 2.6.18 polled for status regardless if we actually needed it. At some point I dropped it, to save the batteries if nothing else. As it turned out, printers exist (e.g. Canon BJC-3000) that need prodding this way or else they stop. This patch restores the old behaviour. If you want to save battery, don't leave jobs in the print queue. I tested this on my printers by printing and examining usbmon traces to make sure status is being requested and printers continue to print. Tuomas Jäntti verified the fix on BJC-3000. Signed-off-by: Pete Zaitcev Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/usblp.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c index 3f3ee13..d2747a4 100644 --- a/drivers/usb/class/usblp.c +++ b/drivers/usb/class/usblp.c @@ -880,16 +880,19 @@ static int usblp_wwait(struct usblp *usblp, int nonblock) if (rc <= 0) break; - if (usblp->flags & LP_ABORT) { - if (schedule_timeout(msecs_to_jiffies(5000)) == 0) { + if (schedule_timeout(msecs_to_jiffies(1500)) == 0) { + if (usblp->flags & LP_ABORT) { err = usblp_check_status(usblp, err); if (err == 1) { /* Paper out */ rc = -ENOSPC; break; } + } else { + /* Prod the printer, Gentoo#251237. */ + mutex_lock(&usblp->mut); + usblp_read_status(usblp, usblp->statusbuf); + mutex_unlock(&usblp->mut); } - } else { - schedule(); } } set_current_state(TASK_RUNNING); -- cgit v1.1 From c2344f13b59e007d782a3e591ebc551bc583a8b7 Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Sat, 24 Jan 2009 23:54:31 -0800 Subject: USB: gpio_vbus: add delayed vbus_session calls Call usb_gadget_vbus_connect() and ...disconnect() from a workqueue rather than from an irq handler, allowing msleep() calls in vbus_session. Update kerneldoc to match. [ dbrownell@users.sourceforge.net: more kerneldoc updates ] Signed-off-by: Robert Jarzmik Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/otg/gpio_vbus.c | 42 +++++++++++++++++++++++++++++++----------- 1 file changed, 31 insertions(+), 11 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/otg/gpio_vbus.c b/drivers/usb/otg/gpio_vbus.c index 63a6036..1c26c94 100644 --- a/drivers/usb/otg/gpio_vbus.c +++ b/drivers/usb/otg/gpio_vbus.c @@ -13,6 +13,7 @@ #include #include #include +#include #include @@ -34,6 +35,7 @@ struct gpio_vbus_data { struct regulator *vbus_draw; int vbus_draw_enabled; unsigned mA; + struct work_struct work; }; @@ -76,24 +78,26 @@ static void set_vbus_draw(struct gpio_vbus_data *gpio_vbus, unsigned mA) gpio_vbus->mA = mA; } -/* VBUS change IRQ handler */ -static irqreturn_t gpio_vbus_irq(int irq, void *data) +static int is_vbus_powered(struct gpio_vbus_mach_info *pdata) { - struct platform_device *pdev = data; - struct gpio_vbus_mach_info *pdata = pdev->dev.platform_data; - struct gpio_vbus_data *gpio_vbus = platform_get_drvdata(pdev); - int gpio, vbus; + int vbus; vbus = gpio_get_value(pdata->gpio_vbus); if (pdata->gpio_vbus_inverted) vbus = !vbus; - dev_dbg(&pdev->dev, "VBUS %s (gadget: %s)\n", - vbus ? "supplied" : "inactive", - gpio_vbus->otg.gadget ? gpio_vbus->otg.gadget->name : "none"); + return vbus; +} + +static void gpio_vbus_work(struct work_struct *work) +{ + struct gpio_vbus_data *gpio_vbus = + container_of(work, struct gpio_vbus_data, work); + struct gpio_vbus_mach_info *pdata = gpio_vbus->dev->platform_data; + int gpio; if (!gpio_vbus->otg.gadget) - return IRQ_HANDLED; + return; /* Peripheral controllers which manage the pullup themselves won't have * gpio_pullup configured here. If it's configured here, we'll do what @@ -101,7 +105,7 @@ static irqreturn_t gpio_vbus_irq(int irq, void *data) * that may complicate usb_gadget_{,dis}connect() support. */ gpio = pdata->gpio_pullup; - if (vbus) { + if (is_vbus_powered(pdata)) { gpio_vbus->otg.state = OTG_STATE_B_PERIPHERAL; usb_gadget_vbus_connect(gpio_vbus->otg.gadget); @@ -121,6 +125,21 @@ static irqreturn_t gpio_vbus_irq(int irq, void *data) usb_gadget_vbus_disconnect(gpio_vbus->otg.gadget); gpio_vbus->otg.state = OTG_STATE_B_IDLE; } +} + +/* VBUS change IRQ handler */ +static irqreturn_t gpio_vbus_irq(int irq, void *data) +{ + struct platform_device *pdev = data; + struct gpio_vbus_mach_info *pdata = pdev->dev.platform_data; + struct gpio_vbus_data *gpio_vbus = platform_get_drvdata(pdev); + + dev_dbg(&pdev->dev, "VBUS %s (gadget: %s)\n", + is_vbus_powered(pdata) ? "supplied" : "inactive", + gpio_vbus->otg.gadget ? gpio_vbus->otg.gadget->name : "none"); + + if (gpio_vbus->otg.gadget) + schedule_work(&gpio_vbus->work); return IRQ_HANDLED; } @@ -257,6 +276,7 @@ static int __init gpio_vbus_probe(struct platform_device *pdev) irq, err); goto err_irq; } + INIT_WORK(&gpio_vbus->work, gpio_vbus_work); /* only active when a gadget is registered */ err = otg_set_transceiver(&gpio_vbus->otg); -- cgit v1.1 From eb50702539f9be3765127d927d3e9ccfeb65f26e Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Sat, 24 Jan 2009 23:55:34 -0800 Subject: USB: pxa27x_udc: factor pullup code to prepare otg transceiver Prepare pxa27x_udc to handle usb D+ pullup properly : it should connect the pullup resistor and disconnect it only if no external transceiver is handling it. [ dbrownell@users.sourceforge.net: kerneldoc and gpio fixes ] Signed-off-by: Robert Jarzmik Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/pxa27x_udc.c | 140 +++++++++++++++++++++++++++++++++++++--- drivers/usb/gadget/pxa27x_udc.h | 6 ++ 2 files changed, 138 insertions(+), 8 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c index 990f40f..f814559 100644 --- a/drivers/usb/gadget/pxa27x_udc.c +++ b/drivers/usb/gadget/pxa27x_udc.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include @@ -1471,6 +1472,32 @@ static struct usb_ep_ops pxa_ep_ops = { .fifo_flush = pxa_ep_fifo_flush, }; +/** + * dplus_pullup - Connect or disconnect pullup resistor to D+ pin + * @udc: udc device + * @on: 0 if disconnect pullup resistor, 1 otherwise + * Context: any + * + * Handle D+ pullup resistor, make the device visible to the usb bus, and + * declare it as a full speed usb device + */ +static void dplus_pullup(struct pxa_udc *udc, int on) +{ + if (on) { + if (gpio_is_valid(udc->mach->gpio_pullup)) + gpio_set_value(udc->mach->gpio_pullup, + !udc->mach->gpio_pullup_inverted); + if (udc->mach->udc_command) + udc->mach->udc_command(PXA2XX_UDC_CMD_CONNECT); + } else { + if (gpio_is_valid(udc->mach->gpio_pullup)) + gpio_set_value(udc->mach->gpio_pullup, + udc->mach->gpio_pullup_inverted); + if (udc->mach->udc_command) + udc->mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT); + } + udc->pullup_on = on; +} /** * pxa_udc_get_frame - Returns usb frame number @@ -1500,21 +1527,91 @@ static int pxa_udc_wakeup(struct usb_gadget *_gadget) return 0; } +static void udc_enable(struct pxa_udc *udc); +static void udc_disable(struct pxa_udc *udc); + +/** + * should_enable_udc - Tells if UDC should be enabled + * @udc: udc device + * Context: any + * + * The UDC should be enabled if : + * - the pullup resistor is connected + * - and a gadget driver is bound + * + * Returns 1 if UDC should be enabled, 0 otherwise + */ +static int should_enable_udc(struct pxa_udc *udc) +{ + int put_on; + + put_on = ((udc->pullup_on) && (udc->driver)); + return put_on; +} + +/** + * should_disable_udc - Tells if UDC should be disabled + * @udc: udc device + * Context: any + * + * The UDC should be disabled if : + * - the pullup resistor is not connected + * - or no gadget driver is bound + * + * Returns 1 if UDC should be disabled + */ +static int should_disable_udc(struct pxa_udc *udc) +{ + int put_off; + + put_off = ((!udc->pullup_on) || (!udc->driver)); + return put_off; +} + +/** + * pxa_udc_pullup - Offer manual D+ pullup control + * @_gadget: usb gadget using the control + * @is_active: 0 if disconnect, else connect D+ pullup resistor + * Context: !in_interrupt() + * + * Returns 0 if OK, -EOPNOTSUPP if udc driver doesn't handle D+ pullup + */ +static int pxa_udc_pullup(struct usb_gadget *_gadget, int is_active) +{ + struct pxa_udc *udc = to_gadget_udc(_gadget); + + if (!gpio_is_valid(udc->mach->gpio_pullup) && !udc->mach->udc_command) + return -EOPNOTSUPP; + + dplus_pullup(udc, is_active); + + if (should_enable_udc(udc)) + udc_enable(udc); + if (should_disable_udc(udc)) + udc_disable(udc); + return 0; +} + static const struct usb_gadget_ops pxa_udc_ops = { .get_frame = pxa_udc_get_frame, .wakeup = pxa_udc_wakeup, + .pullup = pxa_udc_pullup, /* current versions must always be self-powered */ }; /** * udc_disable - disable udc device controller * @udc: udc device + * Context: any * * Disables the udc device : disables clocks, udc interrupts, control endpoint * interrupts. */ static void udc_disable(struct pxa_udc *udc) { + if (!udc->enabled) + return; + udc_writel(udc, UDCICR0, 0); udc_writel(udc, UDCICR1, 0); @@ -1523,8 +1620,8 @@ static void udc_disable(struct pxa_udc *udc) ep0_idle(udc); udc->gadget.speed = USB_SPEED_UNKNOWN; - if (udc->mach->udc_command) - udc->mach->udc_command(PXA2XX_UDC_CMD_DISCONNECT); + + udc->enabled = 0; } /** @@ -1570,6 +1667,9 @@ static __init void udc_init_data(struct pxa_udc *dev) */ static void udc_enable(struct pxa_udc *udc) { + if (udc->enabled) + return; + udc_writel(udc, UDCICR0, 0); udc_writel(udc, UDCICR1, 0); udc_clear_mask_UDCCR(udc, UDCCR_UDE); @@ -1598,9 +1698,7 @@ static void udc_enable(struct pxa_udc *udc) /* enable ep0 irqs */ pio_irq_enable(&udc->pxa_ep[0]); - dev_info(udc->dev, "UDC connecting\n"); - if (udc->mach->udc_command) - udc->mach->udc_command(PXA2XX_UDC_CMD_CONNECT); + udc->enabled = 1; } /** @@ -1612,6 +1710,9 @@ static void udc_enable(struct pxa_udc *udc) * usb traffic follows until a disconnect is reported. Then a host may connect * again, or the driver might get unbound. * + * Note that the udc is not automatically enabled. Check function + * should_enable_udc(). + * * Returns 0 if no error, -EINVAL, -ENODEV, -EBUSY otherwise */ int usb_gadget_register_driver(struct usb_gadget_driver *driver) @@ -1630,6 +1731,7 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver) /* first hook up the driver ... */ udc->driver = driver; udc->gadget.dev.driver = &driver->driver; + dplus_pullup(udc, 1); retval = device_add(&udc->gadget.dev); if (retval) { @@ -1645,7 +1747,8 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver) dev_dbg(udc->dev, "registered gadget driver '%s'\n", driver->driver.name); - udc_enable(udc); + if (should_enable_udc(udc)) + udc_enable(udc); return 0; bind_fail: @@ -1699,6 +1802,7 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) stop_activity(udc, driver); udc_disable(udc); + dplus_pullup(udc, 0); driver->unbind(&udc->gadget); udc->driver = NULL; @@ -2212,7 +2316,7 @@ static int __init pxa_udc_probe(struct platform_device *pdev) { struct resource *regs; struct pxa_udc *udc = &memory; - int retval; + int retval = 0, gpio; regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (!regs) @@ -2224,6 +2328,19 @@ static int __init pxa_udc_probe(struct platform_device *pdev) udc->dev = &pdev->dev; udc->mach = pdev->dev.platform_data; + gpio = udc->mach->gpio_pullup; + if (gpio_is_valid(gpio)) { + retval = gpio_request(gpio, "USB D+ pullup"); + if (retval == 0) + gpio_direction_output(gpio, + udc->mach->gpio_pullup_inverted); + } + if (retval) { + dev_err(&pdev->dev, "Couldn't request gpio %d : %d\n", + gpio, retval); + return retval; + } + udc->clk = clk_get(&pdev->dev, NULL); if (IS_ERR(udc->clk)) { retval = PTR_ERR(udc->clk); @@ -2273,10 +2390,13 @@ err_clk: static int __exit pxa_udc_remove(struct platform_device *_dev) { struct pxa_udc *udc = platform_get_drvdata(_dev); + int gpio = udc->mach->gpio_pullup; usb_gadget_unregister_driver(udc->driver); free_irq(udc->irq, udc); pxa_cleanup_debugfs(udc); + if (gpio_is_valid(gpio)) + gpio_free(gpio); platform_set_drvdata(_dev, NULL); the_controller = NULL; @@ -2319,6 +2439,8 @@ static int pxa_udc_suspend(struct platform_device *_dev, pm_message_t state) } udc_disable(udc); + udc->pullup_resume = udc->pullup_on; + dplus_pullup(udc, 0); return 0; } @@ -2346,7 +2468,9 @@ static int pxa_udc_resume(struct platform_device *_dev) ep->udccsr_value, ep->udccr_value); } - udc_enable(udc); + dplus_pullup(udc, udc->pullup_resume); + if (should_enable_udc(udc)) + udc_enable(udc); /* * We do not handle OTG yet. * diff --git a/drivers/usb/gadget/pxa27x_udc.h b/drivers/usb/gadget/pxa27x_udc.h index 1d1b793..6f5234d 100644 --- a/drivers/usb/gadget/pxa27x_udc.h +++ b/drivers/usb/gadget/pxa27x_udc.h @@ -425,6 +425,9 @@ struct udc_stats { * @stats: statistics on udc usage * @udc_usb_ep: array of usb endpoints offered by the gadget * @pxa_ep: array of pxa available endpoints + * @enabled: UDC was enabled by a previous udc_enable() + * @pullup_on: if pullup resistor connected to D+ pin + * @pullup_resume: if pullup resistor should be connected to D+ pin on resume * @config: UDC active configuration * @last_interface: UDC interface of the last SET_INTERFACE host request * @last_alternate: UDC altsetting of the last SET_INTERFACE host request @@ -450,6 +453,9 @@ struct pxa_udc { struct udc_usb_ep udc_usb_ep[NR_USB_ENDPOINTS]; struct pxa_ep pxa_ep[NR_PXA_ENDPOINTS]; + unsigned enabled:1; + unsigned pullup_on:1; + unsigned pullup_resume:1; unsigned config:2; unsigned last_interface:3; unsigned last_alternate:3; -- cgit v1.1 From b799a7eb68082af620b7e37b6f41c98802e831f6 Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Sat, 24 Jan 2009 23:56:42 -0800 Subject: USB: pxa27x_udc: add vbus session handling On vbus_session() call, optionally activate D+ pullup resistor and enable the udc, or deactivate D+ pullup resistor and disable the udc. It is intentional to not handle any VBus sense related irq. An external transceiver driver (like gpio_vbus) should catch VBus sense signal, and call usb_gadget_vbus_connect() or usb_gadget_vbus_disconnect(). Signed-off-by: Robert Jarzmik Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/pxa27x_udc.c | 33 +++++++++++++++++++++++++++++++++ drivers/usb/gadget/pxa27x_udc.h | 1 + 2 files changed, 34 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c index f814559..0c93071 100644 --- a/drivers/usb/gadget/pxa27x_udc.c +++ b/drivers/usb/gadget/pxa27x_udc.c @@ -1536,8 +1536,10 @@ static void udc_disable(struct pxa_udc *udc); * Context: any * * The UDC should be enabled if : + * - the pullup resistor is connected * - and a gadget driver is bound + * - and vbus is sensed (or no vbus sense is available) * * Returns 1 if UDC should be enabled, 0 otherwise */ @@ -1546,6 +1548,7 @@ static int should_enable_udc(struct pxa_udc *udc) int put_on; put_on = ((udc->pullup_on) && (udc->driver)); + put_on &= ((udc->vbus_sensed) || (!udc->transceiver)); return put_on; } @@ -1557,6 +1560,7 @@ static int should_enable_udc(struct pxa_udc *udc) * The UDC should be disabled if : * - the pullup resistor is not connected * - or no gadget driver is bound + * - or no vbus is sensed (when vbus sesing is available) * * Returns 1 if UDC should be disabled */ @@ -1565,6 +1569,7 @@ static int should_disable_udc(struct pxa_udc *udc) int put_off; put_off = ((!udc->pullup_on) || (!udc->driver)); + put_off |= ((!udc->vbus_sensed) && (udc->transceiver)); return put_off; } @@ -1592,10 +1597,37 @@ static int pxa_udc_pullup(struct usb_gadget *_gadget, int is_active) return 0; } +static void udc_enable(struct pxa_udc *udc); +static void udc_disable(struct pxa_udc *udc); + +/** + * pxa_udc_vbus_session - Called by external transceiver to enable/disable udc + * @_gadget: usb gadget + * @is_active: 0 if should disable the udc, 1 if should enable + * + * Enables the udc, and optionnaly activates D+ pullup resistor. Or disables the + * udc, and deactivates D+ pullup resistor. + * + * Returns 0 + */ +static int pxa_udc_vbus_session(struct usb_gadget *_gadget, int is_active) +{ + struct pxa_udc *udc = to_gadget_udc(_gadget); + + udc->vbus_sensed = is_active; + if (should_enable_udc(udc)) + udc_enable(udc); + if (should_disable_udc(udc)) + udc_disable(udc); + + return 0; +} + static const struct usb_gadget_ops pxa_udc_ops = { .get_frame = pxa_udc_get_frame, .wakeup = pxa_udc_wakeup, .pullup = pxa_udc_pullup, + .vbus_session = pxa_udc_vbus_session, /* current versions must always be self-powered */ }; @@ -2357,6 +2389,7 @@ static int __init pxa_udc_probe(struct platform_device *pdev) device_initialize(&udc->gadget.dev); udc->gadget.dev.parent = &pdev->dev; udc->gadget.dev.dma_mask = NULL; + udc->vbus_sensed = 0; the_controller = udc; platform_set_drvdata(pdev, udc); diff --git a/drivers/usb/gadget/pxa27x_udc.h b/drivers/usb/gadget/pxa27x_udc.h index 6f5234d..64741e19 100644 --- a/drivers/usb/gadget/pxa27x_udc.h +++ b/drivers/usb/gadget/pxa27x_udc.h @@ -456,6 +456,7 @@ struct pxa_udc { unsigned enabled:1; unsigned pullup_on:1; unsigned pullup_resume:1; + unsigned vbus_sensed:1; unsigned config:2; unsigned last_interface:3; unsigned last_alternate:3; -- cgit v1.1 From 7fec3c25b773883bd50c4078bcccdd23d3dadeac Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Sat, 24 Jan 2009 23:57:30 -0800 Subject: USB: pxa27x_udc: add otg transceiver support When a transceiver driver is used, no automatic udc enable is done. The transceiver (OTG or not) should : - take care of VBus sensing - call usb_gadget_vbus_connect() - call usb_gadget_vbus_disconnect() The pullup should remain within this driver's management, either by gpio_pullup of udc_command() fields. Signed-off-by: Robert Jarzmik Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/Kconfig | 1 + drivers/usb/gadget/pxa27x_udc.c | 19 ++++++++++++++++++- drivers/usb/gadget/pxa27x_udc.h | 3 +++ 3 files changed, 22 insertions(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index e55fef5..770b3ea 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -254,6 +254,7 @@ config USB_PXA25X_SMALL config USB_GADGET_PXA27X boolean "PXA 27x" depends on ARCH_PXA && PXA27x + select USB_OTG_UTILS help Intel's PXA 27x series XScale ARM v5TE processors include an integrated full speed USB 1.1 device controller. diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c index 0c93071..1151047 100644 --- a/drivers/usb/gadget/pxa27x_udc.c +++ b/drivers/usb/gadget/pxa27x_udc.c @@ -1779,10 +1779,21 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver) dev_dbg(udc->dev, "registered gadget driver '%s'\n", driver->driver.name); + if (udc->transceiver) { + retval = otg_set_peripheral(udc->transceiver, &udc->gadget); + if (retval) { + dev_err(udc->dev, "can't bind to transceiver\n"); + goto transceiver_fail; + } + } + if (should_enable_udc(udc)) udc_enable(udc); return 0; +transceiver_fail: + if (driver->unbind) + driver->unbind(&udc->gadget); bind_fail: device_del(&udc->gadget.dev); add_fail: @@ -1840,9 +1851,11 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) udc->driver = NULL; device_del(&udc->gadget.dev); - dev_info(udc->dev, "unregistered gadget driver '%s'\n", driver->driver.name); + + if (udc->transceiver) + return otg_set_peripheral(udc->transceiver, NULL); return 0; } EXPORT_SYMBOL(usb_gadget_unregister_driver); @@ -2359,6 +2372,7 @@ static int __init pxa_udc_probe(struct platform_device *pdev) udc->dev = &pdev->dev; udc->mach = pdev->dev.platform_data; + udc->transceiver = otg_get_transceiver(); gpio = udc->mach->gpio_pullup; if (gpio_is_valid(gpio)) { @@ -2431,6 +2445,9 @@ static int __exit pxa_udc_remove(struct platform_device *_dev) if (gpio_is_valid(gpio)) gpio_free(gpio); + otg_put_transceiver(udc->transceiver); + + udc->transceiver = NULL; platform_set_drvdata(_dev, NULL); the_controller = NULL; clk_put(udc->clk); diff --git a/drivers/usb/gadget/pxa27x_udc.h b/drivers/usb/gadget/pxa27x_udc.h index 64741e19..db58125 100644 --- a/drivers/usb/gadget/pxa27x_udc.h +++ b/drivers/usb/gadget/pxa27x_udc.h @@ -26,6 +26,7 @@ #include #include #include +#include /* * Register definitions @@ -421,6 +422,7 @@ struct udc_stats { * @driver: bound gadget (zero, g_ether, g_file_storage, ...) * @dev: device * @mach: machine info, used to activate specific GPIO + * @transceiver: external transceiver to handle vbus sense and D+ pullup * @ep0state: control endpoint state machine state * @stats: statistics on udc usage * @udc_usb_ep: array of usb endpoints offered by the gadget @@ -446,6 +448,7 @@ struct pxa_udc { struct usb_gadget_driver *driver; struct device *dev; struct pxa2xx_udc_mach_info *mach; + struct otg_transceiver *transceiver; enum ep0_state ep0state; struct udc_stats stats; -- cgit v1.1 From ee069fb1185895e725ad942c7a529f947e25166d Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Sat, 24 Jan 2009 23:59:38 -0800 Subject: USB: pxa27x_udc: add vbus_draw callback Add the vbus_draw() callback to inform the transceiver, if it exists, how much current may be drawn. The decision is taken on gadget driver side using the configuration chosen by the host and its bMaxPower field. Some systems can use the host's VBUS supply to augment or recharge a battery. (There's also a default of 100 mA for unconfigured devices, or 8 mA if they're OTG devices.) Signed-off-by: Robert Jarzmik Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/pxa27x_udc.c | 24 +++++++++++++++++++++++- 1 file changed, 23 insertions(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c index 1151047..e50419d 100644 --- a/drivers/usb/gadget/pxa27x_udc.c +++ b/drivers/usb/gadget/pxa27x_udc.c @@ -1623,12 +1623,34 @@ static int pxa_udc_vbus_session(struct usb_gadget *_gadget, int is_active) return 0; } +/** + * pxa_udc_vbus_draw - Called by gadget driver after SET_CONFIGURATION completed + * @_gadget: usb gadget + * @mA: current drawn + * + * Context: !in_interrupt() + * + * Called after a configuration was chosen by a USB host, to inform how much + * current can be drawn by the device from VBus line. + * + * Returns 0 or -EOPNOTSUPP if no transceiver is handling the udc + */ +static int pxa_udc_vbus_draw(struct usb_gadget *_gadget, unsigned mA) +{ + struct pxa_udc *udc; + + udc = to_gadget_udc(_gadget); + if (udc->transceiver) + return otg_set_power(udc->transceiver, mA); + return -EOPNOTSUPP; +} + static const struct usb_gadget_ops pxa_udc_ops = { .get_frame = pxa_udc_get_frame, .wakeup = pxa_udc_wakeup, .pullup = pxa_udc_pullup, .vbus_session = pxa_udc_vbus_session, - /* current versions must always be self-powered */ + .vbus_draw = pxa_udc_vbus_draw, }; /** -- cgit v1.1 From 00185a60c37549531b9eee562d3eba19020875d5 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Sun, 21 Dec 2008 16:41:36 +0100 Subject: USB: Remove redundant test in pxa27x_udc and ftdi_sio priv is checked not to be NULL near the beginning of the function and not changed subsequently, making the test redundant. A simplified version of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // @r exists@ local idexpression x; expression E; position p1,p2; @@ if (x@p1 == NULL || ...) { ... when forall return ...; } ... when != \(x=E\|x--\|x++\|--x\|++x\|x-=E\|x+=E\|x|=E\|x&=E\|&x\) ( x@p2 == NULL | x@p2 != NULL ) // another path to the test that is not through p1? @s exists@ local idexpression r.x; position r.p1,r.p2; @@ ... when != x@p1 ( x@p2 == NULL | x@p2 != NULL ) @fix depends on !s@ position r.p1,r.p2; expression x,E; statement S1,S2; @@ ( - if ((x@p2 != NULL) || ...) S1 | - if ((x@p2 == NULL) && ...) S1 | - BUG_ON(x@p2 == NULL); ) // Signed-off-by: Julia Lawall Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/pxa27x_udc.c | 2 +- drivers/usb/serial/ftdi_sio.c | 16 +++++++--------- 2 files changed, 8 insertions(+), 10 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c index e50419d..91ba1e9 100644 --- a/drivers/usb/gadget/pxa27x_udc.c +++ b/drivers/usb/gadget/pxa27x_udc.c @@ -279,7 +279,7 @@ static void pxa_init_debugfs(struct pxa_udc *udc) goto err_queues; eps = debugfs_create_file("epstate", 0400, root, udc, &eps_dbg_fops); - if (!queues) + if (!eps) goto err_eps; udc->debugfs_root = root; diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index ae84c32..d889216 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1938,15 +1938,13 @@ static void ftdi_process_read(struct work_struct *work) /* Compare new line status to the old one, signal if different/ N.B. packet may be processed more than once, but differences are only processed once. */ - if (priv != NULL) { - char new_status = data[packet_offset + 0] & - FTDI_STATUS_B0_MASK; - if (new_status != priv->prev_status) { - priv->diff_status |= - new_status ^ priv->prev_status; - wake_up_interruptible(&priv->delta_msr_wait); - priv->prev_status = new_status; - } + char new_status = data[packet_offset + 0] & + FTDI_STATUS_B0_MASK; + if (new_status != priv->prev_status) { + priv->diff_status |= + new_status ^ priv->prev_status; + wake_up_interruptible(&priv->delta_msr_wait); + priv->prev_status = new_status; } length = min(PKTSZ, urb->actual_length-packet_offset)-2; -- cgit v1.1 From 2e0fe709687470637a0709b930ccc9e993d2dad5 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 29 Dec 2008 11:22:14 +0100 Subject: USB: drivers: use USB API functions rather than constants This set of patches introduces calls to the following set of functions: usb_endpoint_dir_in(epd) usb_endpoint_dir_out(epd) usb_endpoint_is_bulk_in(epd) usb_endpoint_is_bulk_out(epd) usb_endpoint_is_int_in(epd) usb_endpoint_is_int_out(epd) usb_endpoint_num(epd) usb_endpoint_type(epd) usb_endpoint_xfer_bulk(epd) usb_endpoint_xfer_control(epd) usb_endpoint_xfer_int(epd) usb_endpoint_xfer_isoc(epd) In some cases, introducing one of these functions is not possible, and it just replaces an explicit integer value by one of the following constants: USB_ENDPOINT_XFER_BULK USB_ENDPOINT_XFER_CONTROL USB_ENDPOINT_XFER_INT USB_ENDPOINT_XFER_ISOC An extract of the semantic patch that makes these changes is as follows: (http://www.emn.fr/x-info/coccinelle/) // @r1@ struct usb_endpoint_descriptor *epd; @@ - ((epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\)) == - \(USB_ENDPOINT_XFER_CONTROL\|0\)) + usb_endpoint_xfer_control(epd) @r5@ struct usb_endpoint_descriptor *epd; @@ - ((epd->bEndpointAddress & \(USB_ENDPOINT_DIR_MASK\|0x80\)) == - \(USB_DIR_IN\|0x80\)) + usb_endpoint_dir_in(epd) @inc@ @@ #include @depends on !inc && (r1||r5)@ @@ + #include #include // Signed-off-by: Julia Lawall Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/devices.c | 2 +- drivers/usb/core/endpoint.c | 9 ++++----- drivers/usb/host/r8a66597-hcd.c | 15 +++++++-------- drivers/usb/serial/keyspan.c | 2 +- drivers/usb/storage/usb.c | 6 +++--- 5 files changed, 16 insertions(+), 18 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/core/devices.c b/drivers/usb/core/devices.c index 6ec3817..73c108d 100644 --- a/drivers/usb/core/devices.c +++ b/drivers/usb/core/devices.c @@ -187,7 +187,7 @@ static char *usb_dump_endpoint_descriptor(int speed, char *start, char *end, } /* this isn't checking for illegal values */ - switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) { + switch (usb_endpoint_type(desc)) { case USB_ENDPOINT_XFER_CONTROL: type = "Ctrl"; if (speed == USB_SPEED_HIGH) /* uframes per NAK */ diff --git a/drivers/usb/core/endpoint.c b/drivers/usb/core/endpoint.c index e1710f2..40dee2a 100644 --- a/drivers/usb/core/endpoint.c +++ b/drivers/usb/core/endpoint.c @@ -66,7 +66,7 @@ static ssize_t show_ep_type(struct device *dev, struct device_attribute *attr, struct ep_device *ep = to_ep_device(dev); char *type = "unknown"; - switch (ep->desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) { + switch (usb_endpoint_type(ep->desc)) { case USB_ENDPOINT_XFER_CONTROL: type = "Control"; break; @@ -94,7 +94,7 @@ static ssize_t show_ep_interval(struct device *dev, in = (ep->desc->bEndpointAddress & USB_DIR_IN); - switch (ep->desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) { + switch (usb_endpoint_type(ep->desc)) { case USB_ENDPOINT_XFER_CONTROL: if (ep->udev->speed == USB_SPEED_HIGH) /* uframes per NAK */ interval = ep->desc->bInterval; @@ -131,10 +131,9 @@ static ssize_t show_ep_direction(struct device *dev, struct ep_device *ep = to_ep_device(dev); char *direction; - if ((ep->desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == - USB_ENDPOINT_XFER_CONTROL) + if (usb_endpoint_xfer_control(ep->desc)) direction = "both"; - else if (ep->desc->bEndpointAddress & USB_DIR_IN) + else if (usb_endpoint_dir_in(ep->desc)) direction = "in"; else direction = "out"; diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index 3190412..5e942d9 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -660,9 +660,9 @@ static u16 get_empty_pipenum(struct r8a66597 *r8a66597, u16 array[R8A66597_MAX_NUM_PIPE], i = 0, min; memset(array, 0, sizeof(array)); - switch (ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) { + switch (usb_endpoint_type(ep)) { case USB_ENDPOINT_XFER_BULK: - if (ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK) + if (usb_endpoint_dir_in(ep)) array[i++] = 4; else { array[i++] = 3; @@ -670,7 +670,7 @@ static u16 get_empty_pipenum(struct r8a66597 *r8a66597, } break; case USB_ENDPOINT_XFER_INT: - if (ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK) { + if (usb_endpoint_dir_in(ep)) { array[i++] = 6; array[i++] = 7; array[i++] = 8; @@ -678,7 +678,7 @@ static u16 get_empty_pipenum(struct r8a66597 *r8a66597, array[i++] = 9; break; case USB_ENDPOINT_XFER_ISOC: - if (ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK) + if (usb_endpoint_dir_in(ep)) array[i++] = 2; else array[i++] = 1; @@ -928,10 +928,9 @@ static void init_pipe_info(struct r8a66597 *r8a66597, struct urb *urb, info.pipenum = get_empty_pipenum(r8a66597, ep); info.address = get_urb_to_r8a66597_addr(r8a66597, urb); - info.epnum = ep->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; + info.epnum = usb_endpoint_num(ep); info.maxpacket = le16_to_cpu(ep->wMaxPacketSize); - info.type = get_r8a66597_type(ep->bmAttributes - & USB_ENDPOINT_XFERTYPE_MASK); + info.type = get_r8a66597_type(usb_endpoint_type(ep)); info.bufnum = get_bufnum(info.pipenum); info.buf_bsize = get_buf_bsize(info.pipenum); if (info.type == R8A66597_BULK) { @@ -941,7 +940,7 @@ static void init_pipe_info(struct r8a66597 *r8a66597, struct urb *urb, info.interval = get_interval(urb, ep->bInterval); info.timer_interval = get_timer_interval(urb, ep->bInterval); } - if (ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK) + if (usb_endpoint_dir_in(ep)) info.dir_in = 1; else info.dir_in = 0; diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index 9878c0f..00daa8f 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -1507,7 +1507,7 @@ static struct urb *keyspan_setup_urb(struct usb_serial *serial, int endpoint, } else { dev_warn(&serial->interface->dev, "unsupported endpoint type %x\n", - ep_desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK); + usb_endpoint_type(ep_desc)); usb_free_urb(urb); return NULL; } diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 4becf49..b01dade 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -846,12 +846,12 @@ static int get_pipes(struct us_data *us) us->send_ctrl_pipe = usb_sndctrlpipe(us->pusb_dev, 0); us->recv_ctrl_pipe = usb_rcvctrlpipe(us->pusb_dev, 0); us->send_bulk_pipe = usb_sndbulkpipe(us->pusb_dev, - ep_out->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK); + usb_endpoint_num(ep_out)); us->recv_bulk_pipe = usb_rcvbulkpipe(us->pusb_dev, - ep_in->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK); + usb_endpoint_num(ep_in)); if (ep_int) { us->recv_intr_pipe = usb_rcvintpipe(us->pusb_dev, - ep_int->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK); + usb_endpoint_num(ep_int)); us->ep_bInterval = ep_int->bInterval; } return 0; -- cgit v1.1 From bcbbbfc169e837f0bf54dd4a6ef0a6494fb14925 Mon Sep 17 00:00:00 2001 From: Huang Weiyi Date: Sun, 11 Jan 2009 17:25:13 +0800 Subject: USB: gadget: remove duplicated #include Removed duplicated #include in drivers/usb/gadget/ci13xxx_udc.c Signed-off-by: Huang Weiyi Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/ci13xxx_udc.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c index bebf911..0e310b9 100644 --- a/drivers/usb/gadget/ci13xxx_udc.c +++ b/drivers/usb/gadget/ci13xxx_udc.c @@ -56,7 +56,6 @@ #include #include #include -#include #include #include #include -- cgit v1.1 From 664d5df92e88b6ef091048a802b3750f4e989180 Mon Sep 17 00:00:00 2001 From: Werner Cornelius Date: Fri, 16 Jan 2009 21:02:41 +0100 Subject: USB: usb-serial ch341: support for DTR/RTS/CTS Fixup of Werner Cornelius patch to the ch341 USB-serial driver, which adds: - support all baudrates, not just a hard-coded set - support for controlling DTR, RTS and CTS Features still missing: - character length other than 8 bits - parity settings - break control I adapted his patch for the new usb_serial API introduced in 2.6.25-git8 by Alan Cox on 22 July 2008. Non-compliance to the new API was a reason for refusing a similar patch from Tollef Fog Heen. Usage example by Tollef Fog Heen : TEMPer USB thermometer Signed-off-by: Werner Cornelius Signed-off-by: Boris Hajduk Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ch341.c | 374 ++++++++++++++++++++++++++++++++++++--------- 1 file changed, 302 insertions(+), 72 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index f61e3ca..d5ea679 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -1,5 +1,7 @@ /* * Copyright 2007, Frank A Kingswood + * Copyright 2007, Werner Cornelius + * Copyright 2009, Boris Hajduk * * ch341.c implements a serial port driver for the Winchiphead CH341. * @@ -21,9 +23,39 @@ #include #include -#define DEFAULT_BAUD_RATE 2400 +#define DEFAULT_BAUD_RATE 9600 #define DEFAULT_TIMEOUT 1000 +/* flags for IO-Bits */ +#define CH341_BIT_RTS (1 << 6) +#define CH341_BIT_DTR (1 << 5) + +/******************************/ +/* interrupt pipe definitions */ +/******************************/ +/* always 4 interrupt bytes */ +/* first irq byte normally 0x08 */ +/* second irq byte base 0x7d + below */ +/* third irq byte base 0x94 + below */ +/* fourth irq byte normally 0xee */ + +/* second interrupt byte */ +#define CH341_MULT_STAT 0x04 /* multiple status since last interrupt event */ + +/* status returned in third interrupt answer byte, inverted in data + from irq */ +#define CH341_BIT_CTS 0x01 +#define CH341_BIT_DSR 0x02 +#define CH341_BIT_RI 0x04 +#define CH341_BIT_DCD 0x08 +#define CH341_BITS_MODEM_STAT 0x0f /* all bits */ + +/*******************************/ +/* baudrate calculation factor */ +/*******************************/ +#define CH341_BAUDBASE_FACTOR 1532620800 +#define CH341_BAUDBASE_DIVMAX 3 + static int debug; static struct usb_device_id id_table [] = { @@ -34,9 +66,12 @@ static struct usb_device_id id_table [] = { MODULE_DEVICE_TABLE(usb, id_table); struct ch341_private { - unsigned baud_rate; - u8 dtr; - u8 rts; + spinlock_t lock; /* access lock */ + wait_queue_head_t delta_msr_wait; /* wait queue for modem status */ + unsigned baud_rate; /* set baud rate */ + u8 line_control; /* set line control value RTS/DTR */ + u8 line_status; /* active status of modem control inputs */ + u8 multi_status_change; /* status changed multiple since last call */ }; static int ch341_control_out(struct usb_device *dev, u8 request, @@ -72,37 +107,28 @@ static int ch341_set_baudrate(struct usb_device *dev, { short a, b; int r; + unsigned long factor; + short divisor; dbg("ch341_set_baudrate(%d)", priv->baud_rate); - switch (priv->baud_rate) { - case 2400: - a = 0xd901; - b = 0x0038; - break; - case 4800: - a = 0x6402; - b = 0x001f; - break; - case 9600: - a = 0xb202; - b = 0x0013; - break; - case 19200: - a = 0xd902; - b = 0x000d; - break; - case 38400: - a = 0x6403; - b = 0x000a; - break; - case 115200: - a = 0xcc03; - b = 0x0008; - break; - default: + + if (!priv->baud_rate) return -EINVAL; + factor = (CH341_BAUDBASE_FACTOR / priv->baud_rate); + divisor = CH341_BAUDBASE_DIVMAX; + + while ((factor > 0xfff0) && divisor) { + factor >>= 3; + divisor--; } + if (factor > 0xfff0) + return -EINVAL; + + factor = 0x10000 - factor; + a = (factor & 0xff00) | divisor; + b = factor & 0xff; + r = ch341_control_out(dev, 0x9a, 0x1312, a); if (!r) r = ch341_control_out(dev, 0x9a, 0x0f2c, b); @@ -110,19 +136,18 @@ static int ch341_set_baudrate(struct usb_device *dev, return r; } -static int ch341_set_handshake(struct usb_device *dev, - struct ch341_private *priv) +static int ch341_set_handshake(struct usb_device *dev, u8 control) { - dbg("ch341_set_handshake(%d,%d)", priv->dtr, priv->rts); - return ch341_control_out(dev, 0xa4, - ~((priv->dtr?1<<5:0)|(priv->rts?1<<6:0)), 0); + dbg("ch341_set_handshake(0x%02x)", control); + return ch341_control_out(dev, 0xa4, ~control, 0); } -static int ch341_get_status(struct usb_device *dev) +static int ch341_get_status(struct usb_device *dev, struct ch341_private *priv) { char *buffer; int r; const unsigned size = 8; + unsigned long flags; dbg("ch341_get_status()"); @@ -134,10 +159,15 @@ static int ch341_get_status(struct usb_device *dev) if (r < 0) goto out; - /* Not having the datasheet for the CH341, we ignore the bytes returned - * from the device. Return error if the device did not respond in time. - */ - r = 0; + /* setup the private status if available */ + if (r == 2) { + r = 0; + spin_lock_irqsave(&priv->lock, flags); + priv->line_status = (~(*buffer)) & CH341_BITS_MODEM_STAT; + priv->multi_status_change = 0; + spin_unlock_irqrestore(&priv->lock, flags); + } else + r = -EPROTO; out: kfree(buffer); return r; @@ -180,7 +210,7 @@ static int ch341_configure(struct usb_device *dev, struct ch341_private *priv) goto out; /* expect 0xff 0xee */ - r = ch341_get_status(dev); + r = ch341_get_status(dev, priv); if (r < 0) goto out; @@ -192,12 +222,12 @@ static int ch341_configure(struct usb_device *dev, struct ch341_private *priv) if (r < 0) goto out; - r = ch341_set_handshake(dev, priv); + r = ch341_set_handshake(dev, priv->line_control); if (r < 0) goto out; /* expect 0x9f 0xee */ - r = ch341_get_status(dev); + r = ch341_get_status(dev, priv); out: kfree(buffer); return r; @@ -216,9 +246,10 @@ static int ch341_attach(struct usb_serial *serial) if (!priv) return -ENOMEM; + spin_lock_init(&priv->lock); + init_waitqueue_head(&priv->delta_msr_wait); priv->baud_rate = DEFAULT_BAUD_RATE; - priv->dtr = 1; - priv->rts = 1; + priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR; r = ch341_configure(serial->dev, priv); if (r < 0) @@ -231,6 +262,35 @@ error: kfree(priv); return r; } +static void ch341_close(struct tty_struct *tty, struct usb_serial_port *port, + struct file *filp) +{ + struct ch341_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + unsigned int c_cflag; + + dbg("%s - port %d", __func__, port->number); + + /* shutdown our urbs */ + dbg("%s - shutting down urbs", __func__); + usb_kill_urb(port->write_urb); + usb_kill_urb(port->read_urb); + usb_kill_urb(port->interrupt_in_urb); + + if (tty) { + c_cflag = tty->termios->c_cflag; + if (c_cflag & HUPCL) { + /* drop DTR and RTS */ + spin_lock_irqsave(&priv->lock, flags); + priv->line_control = 0; + spin_unlock_irqrestore(&priv->lock, flags); + ch341_set_handshake(port->serial->dev, 0); + } + } + wake_up_interruptible(&priv->delta_msr_wait); +} + + /* open this device, set default parameters */ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp) @@ -242,14 +302,13 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port, dbg("ch341_open()"); priv->baud_rate = DEFAULT_BAUD_RATE; - priv->dtr = 1; - priv->rts = 1; + priv->line_control = CH341_BIT_RTS | CH341_BIT_DTR; r = ch341_configure(serial->dev, priv); if (r) goto out; - r = ch341_set_handshake(serial->dev, priv); + r = ch341_set_handshake(serial->dev, priv->line_control); if (r) goto out; @@ -257,6 +316,16 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port, if (r) goto out; + dbg("%s - submitting interrupt urb", __func__); + port->interrupt_in_urb->dev = serial->dev; + r = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); + if (r) { + dev_err(&port->dev, "%s - failed submitting interrupt urb," + " error %d\n", __func__, r); + ch341_close(tty, port, NULL); + return -EPROTO; + } + r = usb_serial_generic_open(tty, port, filp); out: return r; @@ -270,38 +339,194 @@ static void ch341_set_termios(struct tty_struct *tty, { struct ch341_private *priv = usb_get_serial_port_data(port); unsigned baud_rate; + unsigned long flags; dbg("ch341_set_termios()"); + if (!tty || !tty->termios) + return; + baud_rate = tty_get_baud_rate(tty); - switch (baud_rate) { - case 2400: - case 4800: - case 9600: - case 19200: - case 38400: - case 115200: - priv->baud_rate = baud_rate; - break; - default: - dbg("Rate %d not supported, using %d", - baud_rate, DEFAULT_BAUD_RATE); - priv->baud_rate = DEFAULT_BAUD_RATE; + priv->baud_rate = baud_rate; + + if (baud_rate) { + spin_lock_irqsave(&priv->lock, flags); + priv->line_control |= (CH341_BIT_DTR | CH341_BIT_RTS); + spin_unlock_irqrestore(&priv->lock, flags); + ch341_set_baudrate(port->serial->dev, priv); + } else { + spin_lock_irqsave(&priv->lock, flags); + priv->line_control &= ~(CH341_BIT_DTR | CH341_BIT_RTS); + spin_unlock_irqrestore(&priv->lock, flags); } - ch341_set_baudrate(port->serial->dev, priv); + ch341_set_handshake(port->serial->dev, priv->line_control); /* Unimplemented: * (cflag & CSIZE) : data bits [5, 8] * (cflag & PARENB) : parity {NONE, EVEN, ODD} * (cflag & CSTOPB) : stop bits [1, 2] */ +} + +static int ch341_tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear) +{ + struct usb_serial_port *port = tty->driver_data; + struct ch341_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + u8 control; + + spin_lock_irqsave(&priv->lock, flags); + if (set & TIOCM_RTS) + priv->line_control |= CH341_BIT_RTS; + if (set & TIOCM_DTR) + priv->line_control |= CH341_BIT_DTR; + if (clear & TIOCM_RTS) + priv->line_control &= ~CH341_BIT_RTS; + if (clear & TIOCM_DTR) + priv->line_control &= ~CH341_BIT_DTR; + control = priv->line_control; + spin_unlock_irqrestore(&priv->lock, flags); + + return ch341_set_handshake(port->serial->dev, control); +} + +static void ch341_read_int_callback(struct urb *urb) +{ + struct usb_serial_port *port = (struct usb_serial_port *) urb->context; + unsigned char *data = urb->transfer_buffer; + unsigned int actual_length = urb->actual_length; + int status; + + dbg("%s (%d)", __func__, port->number); + + switch (urb->status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dbg("%s - urb shutting down with status: %d", __func__, + urb->status); + return; + default: + dbg("%s - nonzero urb status received: %d", __func__, + urb->status); + goto exit; + } + + usb_serial_debug_data(debug, &port->dev, __func__, + urb->actual_length, urb->transfer_buffer); + + if (actual_length >= 4) { + struct ch341_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + + spin_lock_irqsave(&priv->lock, flags); + priv->line_status = (~(data[2])) & CH341_BITS_MODEM_STAT; + if ((data[1] & CH341_MULT_STAT)) + priv->multi_status_change = 1; + spin_unlock_irqrestore(&priv->lock, flags); + wake_up_interruptible(&priv->delta_msr_wait); + } + +exit: + status = usb_submit_urb(urb, GFP_ATOMIC); + if (status) + dev_err(&urb->dev->dev, + "%s - usb_submit_urb failed with result %d\n", + __func__, status); +} + +static int wait_modem_info(struct usb_serial_port *port, unsigned int arg) +{ + struct ch341_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + u8 prevstatus; + u8 status; + u8 changed; + u8 multi_change = 0; + + spin_lock_irqsave(&priv->lock, flags); + prevstatus = priv->line_status; + priv->multi_status_change = 0; + spin_unlock_irqrestore(&priv->lock, flags); + + while (!multi_change) { + interruptible_sleep_on(&priv->delta_msr_wait); + /* see if a signal did it */ + if (signal_pending(current)) + return -ERESTARTSYS; + + spin_lock_irqsave(&priv->lock, flags); + status = priv->line_status; + multi_change = priv->multi_status_change; + spin_unlock_irqrestore(&priv->lock, flags); + + changed = prevstatus ^ status; + + if (((arg & TIOCM_RNG) && (changed & CH341_BIT_RI)) || + ((arg & TIOCM_DSR) && (changed & CH341_BIT_DSR)) || + ((arg & TIOCM_CD) && (changed & CH341_BIT_DCD)) || + ((arg & TIOCM_CTS) && (changed & CH341_BIT_CTS))) { + return 0; + } + prevstatus = status; + } + + return 0; +} + +/*static int ch341_ioctl(struct usb_serial_port *port, struct file *file,*/ +static int ch341_ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg) +{ + struct usb_serial_port *port = tty->driver_data; + dbg("%s (%d) cmd = 0x%04x", __func__, port->number, cmd); + + switch (cmd) { + case TIOCMIWAIT: + dbg("%s (%d) TIOCMIWAIT", __func__, port->number); + return wait_modem_info(port, arg); + + default: + dbg("%s not supported = 0x%04x", __func__, cmd); + break; + } + + return -ENOIOCTLCMD; +} + +static int ch341_tiocmget(struct tty_struct *tty, struct file *file) +{ + struct usb_serial_port *port = tty->driver_data; + struct ch341_private *priv = usb_get_serial_port_data(port); + unsigned long flags; + u8 mcr; + u8 status; + unsigned int result; + + dbg("%s (%d)", __func__, port->number); + + spin_lock_irqsave(&priv->lock, flags); + mcr = priv->line_control; + status = priv->line_status; + spin_unlock_irqrestore(&priv->lock, flags); + + result = ((mcr & CH341_BIT_DTR) ? TIOCM_DTR : 0) + | ((mcr & CH341_BIT_RTS) ? TIOCM_RTS : 0) + | ((status & CH341_BIT_CTS) ? TIOCM_CTS : 0) + | ((status & CH341_BIT_DSR) ? TIOCM_DSR : 0) + | ((status & CH341_BIT_RI) ? TIOCM_RI : 0) + | ((status & CH341_BIT_DCD) ? TIOCM_CD : 0); + + dbg("%s - result = %x", __func__, result); - /* Copy back the old hardware settings */ - tty_termios_copy_hw(tty->termios, old_termios); - /* And re-encode with the new baud */ - tty_encode_baud_rate(tty, baud_rate, baud_rate); + return result; } static struct usb_driver ch341_driver = { @@ -317,12 +542,17 @@ static struct usb_serial_driver ch341_device = { .owner = THIS_MODULE, .name = "ch341-uart", }, - .id_table = id_table, - .usb_driver = &ch341_driver, - .num_ports = 1, - .open = ch341_open, - .set_termios = ch341_set_termios, - .attach = ch341_attach, + .id_table = id_table, + .usb_driver = &ch341_driver, + .num_ports = 1, + .open = ch341_open, + .close = ch341_close, + .ioctl = ch341_ioctl, + .set_termios = ch341_set_termios, + .tiocmget = ch341_tiocmget, + .tiocmset = ch341_tiocmset, + .read_int_callback = ch341_read_int_callback, + .attach = ch341_attach, }; static int __init ch341_init(void) -- cgit v1.1 From 8f182e5ddc84a30d7014a753ae359d85b1238e7f Mon Sep 17 00:00:00 2001 From: Darius Augulis Date: Wed, 21 Jan 2009 15:17:25 +0200 Subject: USB: imx_udc: Fix IMX UDC gadget bugs Fix small bugs and add some omptimization in IMX UDC Gadget. Signed-off-by: Darius Augulis Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/imx_udc.c | 33 +++++++++++++++++++-------------- drivers/usb/gadget/imx_udc.h | 2 +- 2 files changed, 20 insertions(+), 15 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c index 77c5d0a..9e3fe30 100644 --- a/drivers/usb/gadget/imx_udc.c +++ b/drivers/usb/gadget/imx_udc.c @@ -283,7 +283,7 @@ void imx_ep_stall(struct imx_ep_struct *imx_ep) imx_flush(imx_ep); /* Special care for ep0 */ - if (EP_NO(imx_ep)) { + if (!EP_NO(imx_ep)) { temp = __raw_readl(imx_usb->base + USB_CTRL); __raw_writel(temp | CTRL_CMDOVER | CTRL_CMDERROR, imx_usb->base + USB_CTRL); do { } while (__raw_readl(imx_usb->base + USB_CTRL) & CTRL_CMDOVER); @@ -301,7 +301,7 @@ void imx_ep_stall(struct imx_ep_struct *imx_ep) break; udelay(20); } - if (i == 50) + if (i == 100) D_ERR(imx_usb->dev, "<%s> Non finished stall on %s\n", __func__, imx_ep->ep.name); } @@ -539,10 +539,9 @@ static int handle_ep0(struct imx_ep_struct *imx_ep) struct imx_request *req = NULL; int ret = 0; - if (!list_empty(&imx_ep->queue)) + if (!list_empty(&imx_ep->queue)) { req = list_entry(imx_ep->queue.next, struct imx_request, queue); - if (req) { switch (imx_ep->imx_usb->ep0state) { case EP0_IN_DATA_PHASE: /* GET_DESCRIPTOR */ @@ -561,6 +560,10 @@ static int handle_ep0(struct imx_ep_struct *imx_ep) } } + else + D_ERR(imx_ep->imx_usb->dev, "<%s> no request on %s\n", + __func__, imx_ep->ep.name); + return ret; } @@ -759,7 +762,7 @@ static int imx_ep_queue */ if (imx_usb->set_config && !EP_NO(imx_ep)) { imx_usb->set_config = 0; - D_EPX(imx_usb->dev, + D_ERR(imx_usb->dev, "<%s> gadget reply set config\n", __func__); return 0; } @@ -779,8 +782,6 @@ static int imx_ep_queue return -ESHUTDOWN; } - local_irq_save(flags); - /* Debug */ D_REQ(imx_usb->dev, "<%s> ep%d %s request for [%d] bytes\n", __func__, EP_NO(imx_ep), @@ -790,17 +791,18 @@ static int imx_ep_queue if (imx_ep->stopped) { usb_req->status = -ESHUTDOWN; - ret = -ESHUTDOWN; - goto out; + return -ESHUTDOWN; } if (req->in_use) { D_ERR(imx_usb->dev, "<%s> refusing to queue req %p (already queued)\n", __func__, req); - goto out; + return 0; } + local_irq_save(flags); + usb_req->status = -EINPROGRESS; usb_req->actual = 0; @@ -810,7 +812,7 @@ static int imx_ep_queue ret = handle_ep0(imx_ep); else ret = handle_ep(imx_ep); -out: + local_irq_restore(flags); return ret; } @@ -1010,10 +1012,8 @@ static irqreturn_t imx_udc_irq(int irq, void *dev) dump_usb_stat(__func__, imx_usb); } - if (!imx_usb->driver) { - /*imx_udc_disable(imx_usb);*/ + if (!imx_usb->driver) goto end_irq; - } if (intr & INTR_WAKEUP) { if (imx_usb->gadget.speed == USB_SPEED_UNKNOWN @@ -1095,6 +1095,11 @@ static irqreturn_t imx_udc_irq(int irq, void *dev) } if (intr & INTR_SOF) { + /* Copy from Freescale BSP. + We must enable SOF intr and set CMDOVER. + Datasheet don't specifiy this action, but it + is done in Freescale BSP, so just copy it. + */ if (imx_usb->ep0state == EP0_IDLE) { temp = __raw_readl(imx_usb->base + USB_CTRL); __raw_writel(temp | CTRL_CMDOVER, imx_usb->base + USB_CTRL); diff --git a/drivers/usb/gadget/imx_udc.h b/drivers/usb/gadget/imx_udc.h index 8500769..d1dfb2d 100644 --- a/drivers/usb/gadget/imx_udc.h +++ b/drivers/usb/gadget/imx_udc.h @@ -170,7 +170,7 @@ struct imx_udc_struct { /* #define DEBUG_IRQ */ /* #define DEBUG_EPIRQ */ /* #define DEBUG_DUMP */ -#define DEBUG_ERR +/* #define DEBUG_ERR */ #ifdef DEBUG_REQ #define D_REQ(dev, args...) dev_dbg(dev, ## args) -- cgit v1.1 From 593bef6c75e11d2edb5396bd9775cf49a4cda659 Mon Sep 17 00:00:00 2001 From: Darius Augulis Date: Wed, 21 Jan 2009 15:17:55 +0200 Subject: USB: imx_udc: Fix IMX UDC gadget code style Fix code style errors in IMX UDC Gadget. Signed-off-by: Darius Augulis Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/imx_udc.c | 59 +++++++++++++++++++++++++++++--------------- drivers/usb/gadget/imx_udc.h | 46 ++++++++++++++++++++++------------ 2 files changed, 69 insertions(+), 36 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c index 9e3fe30..3ee5bd8 100644 --- a/drivers/usb/gadget/imx_udc.c +++ b/drivers/usb/gadget/imx_udc.c @@ -1,7 +1,7 @@ /* * driver/usb/gadget/imx_udc.c * - * Copyright (C) 2005 Mike Lee(eemike@gmail.com) + * Copyright (C) 2005 Mike Lee * Copyright (C) 2008 Darius Augulis * * This program is free software; you can redistribute it and/or modify @@ -51,7 +51,8 @@ void ep0_chg_stat(const char *label, struct imx_udc_struct *imx_usb, void imx_udc_enable(struct imx_udc_struct *imx_usb) { int temp = __raw_readl(imx_usb->base + USB_CTRL); - __raw_writel(temp | CTRL_FE_ENA | CTRL_AFE_ENA, imx_usb->base + USB_CTRL); + __raw_writel(temp | CTRL_FE_ENA | CTRL_AFE_ENA, + imx_usb->base + USB_CTRL); imx_usb->gadget.speed = USB_SPEED_FULL; } @@ -126,7 +127,8 @@ void imx_udc_config(struct imx_udc_struct *imx_usb) for (j = 0; j < 5; j++) { __raw_writeb(ep_conf[j], imx_usb->base + USB_DDAT); - do {} while (__raw_readl(imx_usb->base + USB_DADR) + do {} while (__raw_readl(imx_usb->base + + USB_DADR) & DADR_BSY); } } @@ -183,7 +185,8 @@ void imx_udc_init_ep(struct imx_udc_struct *imx_usb) temp = (EP_DIR(imx_ep) << 7) | (max << 5) | (imx_ep->bmAttributes << 3); __raw_writel(temp, imx_usb->base + USB_EP_STAT(i)); - __raw_writel(temp | EPSTAT_FLUSH, imx_usb->base + USB_EP_STAT(i)); + __raw_writel(temp | EPSTAT_FLUSH, + imx_usb->base + USB_EP_STAT(i)); D_INI(imx_usb->dev, "<%s> ep%d_stat %08x\n", __func__, i, __raw_readl(imx_usb->base + USB_EP_STAT(i))); } @@ -278,15 +281,18 @@ void imx_ep_stall(struct imx_ep_struct *imx_ep) struct imx_udc_struct *imx_usb = imx_ep->imx_usb; int temp, i; - D_ERR(imx_usb->dev, "<%s> Forced stall on %s\n", __func__, imx_ep->ep.name); + D_ERR(imx_usb->dev, + "<%s> Forced stall on %s\n", __func__, imx_ep->ep.name); imx_flush(imx_ep); /* Special care for ep0 */ if (!EP_NO(imx_ep)) { temp = __raw_readl(imx_usb->base + USB_CTRL); - __raw_writel(temp | CTRL_CMDOVER | CTRL_CMDERROR, imx_usb->base + USB_CTRL); - do { } while (__raw_readl(imx_usb->base + USB_CTRL) & CTRL_CMDOVER); + __raw_writel(temp | CTRL_CMDOVER | CTRL_CMDERROR, + imx_usb->base + USB_CTRL); + do { } while (__raw_readl(imx_usb->base + USB_CTRL) + & CTRL_CMDOVER); temp = __raw_readl(imx_usb->base + USB_CTRL); __raw_writel(temp & ~CTRL_CMDERROR, imx_usb->base + USB_CTRL); } @@ -296,7 +302,8 @@ void imx_ep_stall(struct imx_ep_struct *imx_ep) imx_usb->base + USB_EP_STAT(EP_NO(imx_ep))); for (i = 0; i < 100; i ++) { - temp = __raw_readl(imx_usb->base + USB_EP_STAT(EP_NO(imx_ep))); + temp = __raw_readl(imx_usb->base + + USB_EP_STAT(EP_NO(imx_ep))); if (!(temp & EPSTAT_STALL)) break; udelay(20); @@ -325,7 +332,8 @@ static int imx_udc_wakeup(struct usb_gadget *_gadget) ******************************************************************************* */ -static void ep_add_request(struct imx_ep_struct *imx_ep, struct imx_request *req) +static void ep_add_request(struct imx_ep_struct *imx_ep, + struct imx_request *req) { if (unlikely(!req)) return; @@ -334,7 +342,8 @@ static void ep_add_request(struct imx_ep_struct *imx_ep, struct imx_request *req list_add_tail(&req->queue, &imx_ep->queue); } -static void ep_del_request(struct imx_ep_struct *imx_ep, struct imx_request *req) +static void ep_del_request(struct imx_ep_struct *imx_ep, + struct imx_request *req) { if (unlikely(!req)) return; @@ -343,7 +352,8 @@ static void ep_del_request(struct imx_ep_struct *imx_ep, struct imx_request *req req->in_use = 0; } -static void done(struct imx_ep_struct *imx_ep, struct imx_request *req, int status) +static void done(struct imx_ep_struct *imx_ep, + struct imx_request *req, int status) { ep_del_request(imx_ep, req); @@ -494,7 +504,8 @@ static int write_fifo(struct imx_ep_struct *imx_ep, struct imx_request *req) __func__, imx_ep->ep.name, req, completed ? "completed" : "not completed"); if (!EP_NO(imx_ep)) - ep0_chg_stat(__func__, imx_ep->imx_usb, EP0_IDLE); + ep0_chg_stat(__func__, + imx_ep->imx_usb, EP0_IDLE); } } @@ -586,7 +597,8 @@ static void handle_ep0_devreq(struct imx_udc_struct *imx_usb) "<%s> no setup packet received\n", __func__); goto stall; } - u.word[i] = __raw_readl(imx_usb->base + USB_EP_FDAT(EP_NO(imx_ep))); + u.word[i] = __raw_readl(imx_usb->base + + USB_EP_FDAT(EP_NO(imx_ep))); } temp = imx_ep_empty(imx_ep); @@ -785,8 +797,10 @@ static int imx_ep_queue /* Debug */ D_REQ(imx_usb->dev, "<%s> ep%d %s request for [%d] bytes\n", __func__, EP_NO(imx_ep), - ((!EP_NO(imx_ep) && imx_ep->imx_usb->ep0state == EP0_IN_DATA_PHASE) - || (EP_NO(imx_ep) && EP_DIR(imx_ep))) ? "IN" : "OUT", usb_req->length); + ((!EP_NO(imx_ep) && imx_ep->imx_usb->ep0state + == EP0_IN_DATA_PHASE) + || (EP_NO(imx_ep) && EP_DIR(imx_ep))) + ? "IN" : "OUT", usb_req->length); dump_req(__func__, imx_ep, usb_req); if (imx_ep->stopped) { @@ -1061,7 +1075,8 @@ static irqreturn_t imx_udc_irq(int irq, void *dev) /* Config setup */ if (imx_usb->cfg != cfg) { - D_REQ(imx_usb->dev, "<%s> Change config start\n",__func__); + D_REQ(imx_usb->dev, + "<%s> Change config start\n", __func__); u.bRequest = USB_REQ_SET_CONFIGURATION; u.bRequestType = USB_DIR_OUT | USB_TYPE_STANDARD | @@ -1073,11 +1088,13 @@ static irqreturn_t imx_udc_irq(int irq, void *dev) imx_usb->set_config = 1; imx_usb->driver->setup(&imx_usb->gadget, &u); imx_usb->set_config = 0; - D_REQ(imx_usb->dev, "<%s> Change config done\n",__func__); + D_REQ(imx_usb->dev, + "<%s> Change config done\n", __func__); } if (imx_usb->intf != intf || imx_usb->alt != alt) { - D_REQ(imx_usb->dev, "<%s> Change interface start\n",__func__); + D_REQ(imx_usb->dev, + "<%s> Change interface start\n", __func__); u.bRequest = USB_REQ_SET_INTERFACE; u.bRequestType = USB_DIR_OUT | USB_TYPE_STANDARD | @@ -1090,7 +1107,8 @@ static irqreturn_t imx_udc_irq(int irq, void *dev) imx_usb->set_config = 1; imx_usb->driver->setup(&imx_usb->gadget, &u); imx_usb->set_config = 0; - D_REQ(imx_usb->dev, "<%s> Change interface done\n",__func__); + D_REQ(imx_usb->dev, + "<%s> Change interface done\n", __func__); } } @@ -1102,7 +1120,8 @@ static irqreturn_t imx_udc_irq(int irq, void *dev) */ if (imx_usb->ep0state == EP0_IDLE) { temp = __raw_readl(imx_usb->base + USB_CTRL); - __raw_writel(temp | CTRL_CMDOVER, imx_usb->base + USB_CTRL); + __raw_writel(temp | CTRL_CMDOVER, + imx_usb->base + USB_CTRL); } } diff --git a/drivers/usb/gadget/imx_udc.h b/drivers/usb/gadget/imx_udc.h index d1dfb2d..6b0b1e3 100644 --- a/drivers/usb/gadget/imx_udc.h +++ b/drivers/usb/gadget/imx_udc.h @@ -23,7 +23,8 @@ /* Helper macros */ #define EP_NO(ep) ((ep->bEndpointAddress) & ~USB_DIR_IN) /* IN:1, OUT:0 */ #define EP_DIR(ep) ((ep->bEndpointAddress) & USB_DIR_IN ? 1 : 0) -#define irq_to_ep(irq) (((irq) >= USBD_INT0) || ((irq) <= USBD_INT6) ? ((irq) - USBD_INT0) : (USBD_INT6)) /*should not happen*/ +#define irq_to_ep(irq) (((irq) >= USBD_INT0) || ((irq) <= USBD_INT6) \ + ? ((irq) - USBD_INT0) : (USBD_INT6)) /*should not happen*/ #define ep_to_irq(ep) (EP_NO((ep)) + USBD_INT0) #define IMX_USB_NB_EP 6 @@ -88,8 +89,8 @@ struct imx_udc_struct { #define USB_EP_FDAT3(x) (0x3F + (x*0x30)) /* USB FIFO data */ #define USB_EP_FSTAT(x) (0x40 + (x*0x30)) /* USB FIFO status */ #define USB_EP_FCTRL(x) (0x44 + (x*0x30)) /* USB FIFO control */ -#define USB_EP_LRFP(x) (0x48 + (x*0x30)) /* USB last read frame pointer */ -#define USB_EP_LWFP(x) (0x4C + (x*0x30)) /* USB last write frame pointer */ +#define USB_EP_LRFP(x) (0x48 + (x*0x30)) /* USB last rd f. pointer */ +#define USB_EP_LWFP(x) (0x4C + (x*0x30)) /* USB last wr f. pointer */ #define USB_EP_FALRM(x) (0x50 + (x*0x30)) /* USB FIFO alarm */ #define USB_EP_FRDP(x) (0x54 + (x*0x30)) /* USB FIFO read pointer */ #define USB_EP_FWRP(x) (0x58 + (x*0x30)) /* USB FIFO write pointer */ @@ -228,7 +229,8 @@ struct imx_udc_struct { #endif /* DEBUG_IRQ */ #ifdef DEBUG_EPIRQ - static void dump_ep_intr(const char *label, int nr, int irqreg, struct device *dev) + static void dump_ep_intr(const char *label, int nr, int irqreg, + struct device *dev) { dev_dbg(dev, "<%s> EP%d_INTR=[%s%s%s%s%s%s%s%s%s]\n", label, nr, (irqreg & EPINTR_FIFO_FULL) ? " full" : "", @@ -246,7 +248,8 @@ struct imx_udc_struct { #endif /* DEBUG_IRQ */ #ifdef DEBUG_DUMP - static void dump_usb_stat(const char *label, struct imx_udc_struct *imx_usb) + static void dump_usb_stat(const char *label, + struct imx_udc_struct *imx_usb) { int temp = __raw_readl(imx_usb->base + USB_STAT); @@ -259,12 +262,15 @@ struct imx_udc_struct { (temp & STAT_ALTSET)); } - static void dump_ep_stat(const char *label, struct imx_ep_struct *imx_ep) + static void dump_ep_stat(const char *label, + struct imx_ep_struct *imx_ep) { - int temp = __raw_readl(imx_ep->imx_usb->base + USB_EP_INTR(EP_NO(imx_ep))); + int temp = __raw_readl(imx_ep->imx_usb->base + + USB_EP_INTR(EP_NO(imx_ep))); dev_dbg(imx_ep->imx_usb->dev, - "<%s> EP%d_INTR=[%s%s%s%s%s%s%s%s%s]\n", label, EP_NO(imx_ep), + "<%s> EP%d_INTR=[%s%s%s%s%s%s%s%s%s]\n", + label, EP_NO(imx_ep), (temp & EPINTR_FIFO_FULL) ? " full" : "", (temp & EPINTR_FIFO_EMPTY) ? " fempty" : "", (temp & EPINTR_FIFO_ERROR) ? " ferr" : "", @@ -275,18 +281,22 @@ struct imx_udc_struct { (temp & EPINTR_DEVREQ) ? " devreq" : "", (temp & EPINTR_EOT) ? " eot" : ""); - temp = __raw_readl(imx_ep->imx_usb->base + USB_EP_STAT(EP_NO(imx_ep))); + temp = __raw_readl(imx_ep->imx_usb->base + + USB_EP_STAT(EP_NO(imx_ep))); dev_dbg(imx_ep->imx_usb->dev, - "<%s> EP%d_STAT=[%s%s bcount=%d]\n", label, EP_NO(imx_ep), + "<%s> EP%d_STAT=[%s%s bcount=%d]\n", + label, EP_NO(imx_ep), (temp & EPSTAT_SIP) ? " sip" : "", (temp & EPSTAT_STALL) ? " stall" : "", (temp & EPSTAT_BCOUNT) >> 16); - temp = __raw_readl(imx_ep->imx_usb->base + USB_EP_FSTAT(EP_NO(imx_ep))); + temp = __raw_readl(imx_ep->imx_usb->base + + USB_EP_FSTAT(EP_NO(imx_ep))); dev_dbg(imx_ep->imx_usb->dev, - "<%s> EP%d_FSTAT=[%s%s%s%s%s%s%s]\n", label, EP_NO(imx_ep), + "<%s> EP%d_FSTAT=[%s%s%s%s%s%s%s]\n", + label, EP_NO(imx_ep), (temp & FSTAT_ERR) ? " ferr" : "", (temp & FSTAT_UF) ? " funder" : "", (temp & FSTAT_OF) ? " fover" : "", @@ -296,19 +306,23 @@ struct imx_udc_struct { (temp & FSTAT_EMPTY) ? " fempty" : ""); } - static void dump_req(const char *label, struct imx_ep_struct *imx_ep, struct usb_request *req) + static void dump_req(const char *label, struct imx_ep_struct *imx_ep, + struct usb_request *req) { int i; if (!req || !req->buf) { - dev_dbg(imx_ep->imx_usb->dev, "<%s> req or req buf is free\n", label); + dev_dbg(imx_ep->imx_usb->dev, + "<%s> req or req buf is free\n", label); return; } - if ((!EP_NO(imx_ep) && imx_ep->imx_usb->ep0state == EP0_IN_DATA_PHASE) + if ((!EP_NO(imx_ep) && imx_ep->imx_usb->ep0state + == EP0_IN_DATA_PHASE) || (EP_NO(imx_ep) && EP_DIR(imx_ep))) { - dev_dbg(imx_ep->imx_usb->dev, "<%s> request dump <", label); + dev_dbg(imx_ep->imx_usb->dev, + "<%s> request dump <", label); for (i = 0; i < req->length; i++) printk("%02x-", *((u8 *)req->buf + i)); printk(">\n"); -- cgit v1.1 From d24921a36df31332c32e1bb539671284d9e36bfa Mon Sep 17 00:00:00 2001 From: Darius Augulis Date: Wed, 21 Jan 2009 15:18:33 +0200 Subject: USB: imx_udc: Fix IMX UDC gadget ep0 irq handling Fix ep0 interrupt handling in IMX UDC Gadget. Signed-off-by: Darius Augulis Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/imx_udc.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c index 3ee5bd8..e590464 100644 --- a/drivers/usb/gadget/imx_udc.c +++ b/drivers/usb/gadget/imx_udc.c @@ -1133,6 +1133,7 @@ end_irq: static irqreturn_t imx_udc_ctrl_irq(int irq, void *dev) { struct imx_udc_struct *imx_usb = dev; + struct imx_ep_struct *imx_ep = &imx_usb->imx_ep[0]; int intr = __raw_readl(imx_usb->base + USB_EP_INTR(0)); dump_ep_intr(__func__, 0, intr, imx_usb->dev); @@ -1142,16 +1143,15 @@ static irqreturn_t imx_udc_ctrl_irq(int irq, void *dev) return IRQ_HANDLED; } - /* DEVREQ IRQ has highest priority */ + /* DEVREQ has highest priority */ if (intr & (EPINTR_DEVREQ | EPINTR_MDEVREQ)) handle_ep0_devreq(imx_usb); /* Seem i.MX is missing EOF interrupt sometimes. - * Therefore we monitor both EOF and FIFO_EMPTY interrups - * when transmiting, and both EOF and FIFO_FULL when - * receiving data. + * Therefore we don't monitor EOF. + * We call handle_ep0() only if a request is queued for ep0. */ - else if (intr & (EPINTR_EOF | EPINTR_FIFO_EMPTY | EPINTR_FIFO_FULL)) - handle_ep0(&imx_usb->imx_ep[0]); + else if (!list_empty(&imx_ep->queue)) + handle_ep0(imx_ep); __raw_writel(intr, imx_usb->base + USB_EP_INTR(0)); -- cgit v1.1 From b633d28e2c5fbe1c8d163892644f57df04aa1421 Mon Sep 17 00:00:00 2001 From: Darius Augulis Date: Wed, 21 Jan 2009 15:19:19 +0200 Subject: USB: imx_udc: Fix IMX UDC gadget general irq handling Workaround of hw bug in IMX UDC. This bug causes wrong handling of CFG_CHG interrupt. Workaround is documented inline source code. Signed-off-by: Darius Augulis Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/imx_udc.c | 158 +++++++++++++++++++++++++------------------ drivers/usb/gadget/imx_udc.h | 1 + 2 files changed, 94 insertions(+), 65 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c index e590464..8d3c6a9 100644 --- a/drivers/usb/gadget/imx_udc.c +++ b/drivers/usb/gadget/imx_udc.c @@ -28,6 +28,7 @@ #include #include #include +#include #include #include @@ -1013,70 +1014,32 @@ static void udc_stop_activity(struct imx_udc_struct *imx_usb, ******************************************************************************* */ -static irqreturn_t imx_udc_irq(int irq, void *dev) +/* + * Called when timer expires. + * Timer is started when CFG_CHG is received. + */ +static void handle_config(unsigned long data) { - struct imx_udc_struct *imx_usb = dev; + struct imx_udc_struct *imx_usb = (void *)data; struct usb_ctrlrequest u; int temp, cfg, intf, alt; - int intr = __raw_readl(imx_usb->base + USB_INTR); - - if (intr & (INTR_WAKEUP | INTR_SUSPEND | INTR_RESUME | INTR_RESET_START - | INTR_RESET_STOP | INTR_CFG_CHG)) { - dump_intr(__func__, intr, imx_usb->dev); - dump_usb_stat(__func__, imx_usb); - } - - if (!imx_usb->driver) - goto end_irq; - - if (intr & INTR_WAKEUP) { - if (imx_usb->gadget.speed == USB_SPEED_UNKNOWN - && imx_usb->driver && imx_usb->driver->resume) - imx_usb->driver->resume(&imx_usb->gadget); - imx_usb->set_config = 0; - imx_usb->gadget.speed = USB_SPEED_FULL; - } - - if (intr & INTR_SUSPEND) { - if (imx_usb->gadget.speed != USB_SPEED_UNKNOWN - && imx_usb->driver && imx_usb->driver->suspend) - imx_usb->driver->suspend(&imx_usb->gadget); - imx_usb->set_config = 0; - imx_usb->gadget.speed = USB_SPEED_UNKNOWN; - } - if (intr & INTR_RESET_START) { - __raw_writel(intr, imx_usb->base + USB_INTR); - udc_stop_activity(imx_usb, imx_usb->driver); - imx_usb->set_config = 0; - imx_usb->gadget.speed = USB_SPEED_UNKNOWN; - } - - if (intr & INTR_RESET_STOP) - imx_usb->gadget.speed = USB_SPEED_FULL; + local_irq_disable(); - if (intr & INTR_CFG_CHG) { - __raw_writel(INTR_CFG_CHG, imx_usb->base + USB_INTR); - temp = __raw_readl(imx_usb->base + USB_STAT); - cfg = (temp & STAT_CFG) >> 5; - intf = (temp & STAT_INTF) >> 3; - alt = temp & STAT_ALTSET; + temp = __raw_readl(imx_usb->base + USB_STAT); + cfg = (temp & STAT_CFG) >> 5; + intf = (temp & STAT_INTF) >> 3; + alt = temp & STAT_ALTSET; - D_REQ(imx_usb->dev, - "<%s> orig config C=%d, I=%d, A=%d / " - "req config C=%d, I=%d, A=%d\n", - __func__, imx_usb->cfg, imx_usb->intf, imx_usb->alt, - cfg, intf, alt); + D_REQ(imx_usb->dev, + "<%s> orig config C=%d, I=%d, A=%d / " + "req config C=%d, I=%d, A=%d\n", + __func__, imx_usb->cfg, imx_usb->intf, imx_usb->alt, + cfg, intf, alt); - if (cfg != 1 && cfg != 2) - goto end_irq; + if (cfg == 1 || cfg == 2) { - imx_usb->set_config = 0; - - /* Config setup */ if (imx_usb->cfg != cfg) { - D_REQ(imx_usb->dev, - "<%s> Change config start\n", __func__); u.bRequest = USB_REQ_SET_CONFIGURATION; u.bRequestType = USB_DIR_OUT | USB_TYPE_STANDARD | @@ -1085,16 +1048,10 @@ static irqreturn_t imx_udc_irq(int irq, void *dev) u.wIndex = 0; u.wLength = 0; imx_usb->cfg = cfg; - imx_usb->set_config = 1; imx_usb->driver->setup(&imx_usb->gadget, &u); - imx_usb->set_config = 0; - D_REQ(imx_usb->dev, - "<%s> Change config done\n", __func__); } if (imx_usb->intf != intf || imx_usb->alt != alt) { - D_REQ(imx_usb->dev, - "<%s> Change interface start\n", __func__); u.bRequest = USB_REQ_SET_INTERFACE; u.bRequestType = USB_DIR_OUT | USB_TYPE_STANDARD | @@ -1104,14 +1061,30 @@ static irqreturn_t imx_udc_irq(int irq, void *dev) u.wLength = 0; imx_usb->intf = intf; imx_usb->alt = alt; - imx_usb->set_config = 1; imx_usb->driver->setup(&imx_usb->gadget, &u); - imx_usb->set_config = 0; - D_REQ(imx_usb->dev, - "<%s> Change interface done\n", __func__); } } + imx_usb->set_config = 0; + + local_irq_enable(); +} + +static irqreturn_t imx_udc_irq(int irq, void *dev) +{ + struct imx_udc_struct *imx_usb = dev; + int intr = __raw_readl(imx_usb->base + USB_INTR); + int temp; + + if (intr & (INTR_WAKEUP | INTR_SUSPEND | INTR_RESUME | INTR_RESET_START + | INTR_RESET_STOP | INTR_CFG_CHG)) { + dump_intr(__func__, intr, imx_usb->dev); + dump_usb_stat(__func__, imx_usb); + } + + if (!imx_usb->driver) + goto end_irq; + if (intr & INTR_SOF) { /* Copy from Freescale BSP. We must enable SOF intr and set CMDOVER. @@ -1125,6 +1098,55 @@ static irqreturn_t imx_udc_irq(int irq, void *dev) } } + if (intr & INTR_CFG_CHG) { + /* A workaround of serious IMX UDC bug. + Handling of CFG_CHG should be delayed for some time, because + IMX does not NACK the host when CFG_CHG interrupt is pending. + There is no time to handle current CFG_CHG + if next CFG_CHG or SETUP packed is send immediately. + We have to clear CFG_CHG, start the timer and + NACK the host by setting CTRL_CMDOVER + if it sends any SETUP packet. + When timer expires, handler is called to handle configuration + changes. While CFG_CHG is not handled (set_config=1), + we must NACK the host to every SETUP packed. + This delay prevents from going out of sync with host. + */ + __raw_writel(INTR_CFG_CHG, imx_usb->base + USB_INTR); + imx_usb->set_config = 1; + mod_timer(&imx_usb->timer, jiffies + 5); + goto end_irq; + } + + if (intr & INTR_WAKEUP) { + if (imx_usb->gadget.speed == USB_SPEED_UNKNOWN + && imx_usb->driver && imx_usb->driver->resume) + imx_usb->driver->resume(&imx_usb->gadget); + imx_usb->set_config = 0; + del_timer(&imx_usb->timer); + imx_usb->gadget.speed = USB_SPEED_FULL; + } + + if (intr & INTR_SUSPEND) { + if (imx_usb->gadget.speed != USB_SPEED_UNKNOWN + && imx_usb->driver && imx_usb->driver->suspend) + imx_usb->driver->suspend(&imx_usb->gadget); + imx_usb->set_config = 0; + del_timer(&imx_usb->timer); + imx_usb->gadget.speed = USB_SPEED_UNKNOWN; + } + + if (intr & INTR_RESET_START) { + __raw_writel(intr, imx_usb->base + USB_INTR); + udc_stop_activity(imx_usb, imx_usb->driver); + imx_usb->set_config = 0; + del_timer(&imx_usb->timer); + imx_usb->gadget.speed = USB_SPEED_UNKNOWN; + } + + if (intr & INTR_RESET_STOP) + imx_usb->gadget.speed = USB_SPEED_FULL; + end_irq: __raw_writel(intr, imx_usb->base + USB_INTR); return IRQ_HANDLED; @@ -1342,6 +1364,7 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) udc_stop_activity(imx_usb, driver); imx_udc_disable(imx_usb); + del_timer(&imx_usb->timer); driver->unbind(&imx_usb->gadget); imx_usb->gadget.dev.driver = NULL; @@ -1459,6 +1482,10 @@ static int __init imx_udc_probe(struct platform_device *pdev) usb_init_data(imx_usb); imx_udc_init(imx_usb); + init_timer(&imx_usb->timer); + imx_usb->timer.function = handle_config; + imx_usb->timer.data = (unsigned long)imx_usb; + return 0; fail3: @@ -1481,6 +1508,7 @@ static int __exit imx_udc_remove(struct platform_device *pdev) int i; imx_udc_disable(imx_usb); + del_timer(&imx_usb->timer); for (i = 0; i < IMX_USB_NB_EP + 1; i++) free_irq(imx_usb->usbd_int[i], imx_usb); diff --git a/drivers/usb/gadget/imx_udc.h b/drivers/usb/gadget/imx_udc.h index 6b0b1e3..b48ad59 100644 --- a/drivers/usb/gadget/imx_udc.h +++ b/drivers/usb/gadget/imx_udc.h @@ -59,6 +59,7 @@ struct imx_udc_struct { struct device *dev; struct imx_ep_struct imx_ep[IMX_USB_NB_EP]; struct clk *clk; + struct timer_list timer; enum ep0_state ep0state; struct resource *res; void __iomem *base; -- cgit v1.1 From 4901b2c34ecb6fc45909228ad269c8126efe4401 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Tue, 27 Jan 2009 17:21:40 +0100 Subject: USB: suspend/resume support for option driver This patch implements suspend and resume methods for the option driver. With my hardware I can even suspend the system and keep up a connection for a short time. Signed-off-by: Oliver Neukum Signed-Off-By: Matthias Urlichs Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 86 +++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 80 insertions(+), 6 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 61ebddc4..d560c0b 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -62,6 +62,8 @@ static int option_tiocmget(struct tty_struct *tty, struct file *file); static int option_tiocmset(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear); static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *port); +static int option_suspend(struct usb_serial *serial, pm_message_t message); +static int option_resume(struct usb_serial *serial); /* Vendor and product IDs */ #define OPTION_VENDOR_ID 0x0AF0 @@ -523,6 +525,8 @@ static struct usb_driver option_driver = { .name = "option", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, + .suspend = usb_serial_suspend, + .resume = usb_serial_resume, .id_table = option_ids, .no_dynamic_id = 1, }; @@ -551,6 +555,8 @@ static struct usb_serial_driver option_1port_device = { .attach = option_startup, .shutdown = option_shutdown, .read_int_callback = option_instat_callback, + .suspend = option_suspend, + .resume = option_resume, }; static int debug; @@ -821,10 +827,10 @@ static void option_instat_callback(struct urb *urb) req_pkt->bRequestType, req_pkt->bRequest); } } else - dbg("%s: error %d", __func__, status); + err("%s: error %d", __func__, status); /* Resubmit urb so we continue receiving IRQ data */ - if (status != -ESHUTDOWN) { + if (status != -ESHUTDOWN && status != -ENOENT) { urb->dev = serial->dev; err = usb_submit_urb(urb, GFP_ATOMIC); if (err) @@ -843,7 +849,6 @@ static int option_write_room(struct tty_struct *tty) portdata = usb_get_serial_port_data(port); - for (i = 0; i < N_OUT_URB; i++) { this_urb = portdata->out_urbs[i]; if (this_urb && !test_bit(i, &portdata->out_busy)) @@ -1105,14 +1110,12 @@ bail_out_error: return 1; } -static void option_shutdown(struct usb_serial *serial) +static void stop_read_write_urbs(struct usb_serial *serial) { int i, j; struct usb_serial_port *port; struct option_port_private *portdata; - dbg("%s", __func__); - /* Stop reading/writing urbs */ for (i = 0; i < serial->num_ports; ++i) { port = serial->port[i]; @@ -1122,6 +1125,17 @@ static void option_shutdown(struct usb_serial *serial) for (j = 0; j < N_OUT_URB; j++) usb_kill_urb(portdata->out_urbs[j]); } +} + +static void option_shutdown(struct usb_serial *serial) +{ + int i, j; + struct usb_serial_port *port; + struct option_port_private *portdata; + + dbg("%s", __func__); + + stop_read_write_urbs(serial); /* Now free them */ for (i = 0; i < serial->num_ports; ++i) { @@ -1152,6 +1166,66 @@ static void option_shutdown(struct usb_serial *serial) } } +static int option_suspend(struct usb_serial *serial, pm_message_t message) +{ + dbg("%s entered", __func__); + stop_read_write_urbs(serial); + + return 0; +} + +static int option_resume(struct usb_serial *serial) +{ + int err, i, j; + struct usb_serial_port *port; + struct urb *urb; + struct option_port_private *portdata; + + dbg("%s entered", __func__); + /* get the interrupt URBs resubmitted unconditionally */ + for (i = 0; i < serial->num_ports; i++) { + port = serial->port[i]; + if (!port->interrupt_in_urb) { + dbg("%s: No interrupt URB for port %d\n", __func__, i); + continue; + } + port->interrupt_in_urb->dev = serial->dev; + err = usb_submit_urb(port->interrupt_in_urb, GFP_NOIO); + dbg("Submitted interrupt URB for port %d (result %d)", i, err); + if (err < 0) { + err("%s: Error %d for interrupt URB of port%d", + __func__, err, i); + return err; + } + } + + for (i = 0; i < serial->num_ports; i++) { + /* walk all ports */ + port = serial->port[i]; + portdata = usb_get_serial_port_data(port); + mutex_lock(&port->mutex); + + /* skip closed ports */ + if (!port->port.count) { + mutex_unlock(&port->mutex); + continue; + } + + for (j = 0; j < N_IN_URB; j++) { + urb = portdata->in_urbs[j]; + err = usb_submit_urb(urb, GFP_NOIO); + if (err < 0) { + mutex_unlock(&port->mutex); + err("%s: Error %d for bulk URB %d", + __func__, err, i); + return err; + } + } + mutex_unlock(&port->mutex); + } + return 0; +} + MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_VERSION(DRIVER_VERSION); -- cgit v1.1 From d1c0713daea5d1d881ecc8707458ca6746031376 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Wed, 14 Jan 2009 18:34:06 +0100 Subject: USB: suspend/resume for opticon driver this does the standard support for suspend/resume for the opticon driver. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/opticon.c | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index cea326f..00d5c60 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -306,11 +306,37 @@ static void opticon_shutdown(struct usb_serial *serial) usb_set_serial_data(serial, NULL); } +static int opticon_suspend(struct usb_interface *intf, pm_message_t message) +{ + struct usb_serial *serial = usb_get_intfdata(intf); + struct opticon_private *priv = usb_get_serial_data(serial); + + usb_kill_urb(priv->bulk_read_urb); + return 0; +} + +static int opticon_resume(struct usb_interface *intf) +{ + struct usb_serial *serial = usb_get_intfdata(intf); + struct opticon_private *priv = usb_get_serial_data(serial); + struct usb_serial_port *port = serial->port[0]; + int result; + + mutex_lock(&port->mutex); + if (port->port.count) + result = usb_submit_urb(priv->bulk_read_urb, GFP_NOIO); + else + result = 0; + mutex_unlock(&port->mutex); + return result; +} static struct usb_driver opticon_driver = { .name = "opticon", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, + .suspend = opticon_suspend, + .resume = opticon_resume, .id_table = id_table, .no_dynamic_id = 1, }; -- cgit v1.1 From 6e14bda1b18b2e3c16258427fc43ceb43e1bc1d5 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Sat, 31 Jan 2009 12:37:04 +0100 Subject: USB: count reaches -1, tested 0 With a postfix decrement count will reach -1 rather than 0, so the warning will not be issued. Signed-off-by: Roel Kluin Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/pci-quirks.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index 75b6984..033c284 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -234,7 +234,7 @@ static void __devinit quirk_usb_disable_ehci(struct pci_dev *pdev) */ hcc_params = readl(base + EHCI_HCC_PARAMS); offset = (hcc_params >> 8) & 0xff; - while (offset && count--) { + while (offset && --count) { u32 cap; int msec; -- cgit v1.1 From f8bece8d91f9ed9cff3c98920802f1b3046b7560 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Thu, 5 Feb 2009 16:54:25 +0100 Subject: USB: serial: introduce a flag into the usb serial layer to tell drivers that their URBs are killed due to suspension This patch introduces a flag into the usb serial layer to tell drivers that their URBs are killed due to suspension. That is necessary to let drivers know whether they should report an error back. Signed-off-by: Oliver Neukum Hi Greg, this is for 2.6.30. Patches to use this in drivers are under development. Regards Oliver --- drivers/usb/serial/usb-serial.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index cfcfd5a..c6aaa6d 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -1067,6 +1067,8 @@ int usb_serial_suspend(struct usb_interface *intf, pm_message_t message) struct usb_serial_port *port; int i, r = 0; + serial->suspending = 1; + for (i = 0; i < serial->num_ports; ++i) { port = serial->port[i]; if (port) @@ -1084,8 +1086,10 @@ int usb_serial_resume(struct usb_interface *intf) { struct usb_serial *serial = usb_get_intfdata(intf); + serial->suspending = 0; if (serial->type->resume) return serial->type->resume(serial); + return 0; } EXPORT_SYMBOL(usb_serial_resume); -- cgit v1.1 From d55c0ae6b243bb8e247259089b3a2e47ebfabdf6 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Fri, 6 Feb 2009 15:01:54 +0100 Subject: USB: serial generic resume function fix This removes an unnecessary check for autoresume from the generic resume method. The check has been obsoleted by the now delayed increase of the usage counter which makes the error this check prevented impossible. This change allows drivers which only use the bulk read URB the use of the generic method even if they support autosuspend. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/generic.c | 8 -------- 1 file changed, 8 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index 814909f..c4a47ab 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -177,14 +177,6 @@ int usb_serial_generic_resume(struct usb_serial *serial) struct usb_serial_port *port; int i, c = 0, r; -#ifdef CONFIG_PM - /* - * If this is an autoresume, don't submit URBs. - * They will be submitted in the open function instead. - */ - if (serial->dev->auto_pm) - return 0; -#endif for (i = 0; i < serial->num_ports; i++) { port = serial->port[i]; if (port->port.count && port->read_urb) { -- cgit v1.1 From 81d043c2f30b157b96cb8ef2b570d12c112e395d Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Fri, 6 Feb 2009 15:37:14 +0100 Subject: USB: serial: export symbol of usb_serial_generic_resume This exports a symbol for usb_serial_generic_resume, so that modules can use it. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/generic.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index c4a47ab..9d57cac 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -188,6 +188,7 @@ int usb_serial_generic_resume(struct usb_serial *serial) return c ? -EIO : 0; } +EXPORT_SYMBOL_GPL(usb_serial_generic_resume); void usb_serial_generic_close(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp) -- cgit v1.1 From c49cfa9170256295f4a0fd1668a2411fc05d6b33 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Fri, 6 Feb 2009 18:06:43 +0100 Subject: USB: serial: use generic method if no alternative is provided in usb serial layer This patch makes use of the generic method if a serial driver provides no implementation. This simplifies implementing suspend/resume support in serial drivers. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/usb-serial.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index c6aaa6d..18f9408 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -1085,12 +1085,15 @@ EXPORT_SYMBOL(usb_serial_suspend); int usb_serial_resume(struct usb_interface *intf) { struct usb_serial *serial = usb_get_intfdata(intf); + int rv; serial->suspending = 0; if (serial->type->resume) - return serial->type->resume(serial); + rv = serial->type->resume(serial); + else + rv = usb_serial_generic_resume(serial); - return 0; + return rv; } EXPORT_SYMBOL(usb_serial_resume); -- cgit v1.1 From 6f8aa65b52037123beab573432e371c0f70b7b9a Mon Sep 17 00:00:00 2001 From: Frank Seidel Date: Thu, 5 Feb 2009 16:16:24 +0100 Subject: USB: add missing KERN_* constants to printks According to kerneljanitors todo list all printk calls (beginning a new line) should have an according KERN_* constant. Those are the missing peaces here for the usb subsystem. Signed-off-by: Frank Seidel Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/fsl_usb2_udc.c | 8 +++++--- drivers/usb/gadget/lh7a40x_udc.c | 16 +++++++++------- drivers/usb/host/isp116x.h | 8 ++++---- drivers/usb/storage/alauda.c | 25 ++++++++++++++++--------- drivers/usb/storage/sddr09.c | 37 ++++++++++++++++++++++--------------- drivers/usb/storage/sddr55.c | 4 +++- 6 files changed, 59 insertions(+), 39 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/fsl_usb2_udc.c b/drivers/usb/gadget/fsl_usb2_udc.c index d8d9a52..9d7b95d 100644 --- a/drivers/usb/gadget/fsl_usb2_udc.c +++ b/drivers/usb/gadget/fsl_usb2_udc.c @@ -1802,7 +1802,8 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver) out: if (retval) - printk("gadget driver register failed %d\n", retval); + printk(KERN_WARNING "gadget driver register failed %d\n", + retval); return retval; } EXPORT_SYMBOL(usb_gadget_register_driver); @@ -1847,7 +1848,8 @@ int usb_gadget_unregister_driver(struct usb_gadget_driver *driver) udc_controller->gadget.dev.driver = NULL; udc_controller->driver = NULL; - printk("unregistered gadget driver '%s'\n", driver->driver.name); + printk(KERN_WARNING "unregistered gadget driver '%s'\n", + driver->driver.name); return 0; } EXPORT_SYMBOL(usb_gadget_unregister_driver); @@ -2455,7 +2457,7 @@ module_init(udc_init); static void __exit udc_exit(void) { platform_driver_unregister(&udc_driver); - printk("%s unregistered\n", driver_desc); + printk(KERN_WARNING "%s unregistered\n", driver_desc); } module_exit(udc_exit); diff --git a/drivers/usb/gadget/lh7a40x_udc.c b/drivers/usb/gadget/lh7a40x_udc.c index d554b08..6cd3d54 100644 --- a/drivers/usb/gadget/lh7a40x_udc.c +++ b/drivers/usb/gadget/lh7a40x_udc.c @@ -432,8 +432,8 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver) device_add(&dev->gadget.dev); retval = driver->bind(&dev->gadget); if (retval) { - printk("%s: bind to driver %s --> error %d\n", dev->gadget.name, - driver->driver.name, retval); + printk(KERN_WARNING "%s: bind to driver %s --> error %d\n", + dev->gadget.name, driver->driver.name, retval); device_del(&dev->gadget.dev); dev->driver = 0; @@ -445,8 +445,8 @@ int usb_gadget_register_driver(struct usb_gadget_driver *driver) * for set_configuration as well as eventual disconnect. * NOTE: this shouldn't power up until later. */ - printk("%s: registered gadget driver '%s'\n", dev->gadget.name, - driver->driver.name); + printk(KERN_WARNING "%s: registered gadget driver '%s'\n", + dev->gadget.name, driver->driver.name); udc_enable(dev); @@ -581,7 +581,8 @@ static int read_fifo(struct lh7a40x_ep *ep, struct lh7a40x_request *req) * discard the extra data. */ if (req->req.status != -EOVERFLOW) - printk("%s overflow %d\n", ep->ep.name, count); + printk(KERN_WARNING "%s overflow %d\n", + ep->ep.name, count); req->req.status = -EOVERFLOW; } else { *buf++ = byte; @@ -831,7 +832,8 @@ static void lh7a40x_out_epn(struct lh7a40x_udc *dev, u32 ep_idx, u32 intr) queue); if (!req) { - printk("%s: NULL REQ %d\n", + printk(KERN_WARNING + "%s: NULL REQ %d\n", __func__, ep_idx); flush(ep); break; @@ -844,7 +846,7 @@ static void lh7a40x_out_epn(struct lh7a40x_udc *dev, u32 ep_idx, u32 intr) } else { /* Throw packet away.. */ - printk("%s: No descriptor?!?\n", __func__); + printk(KERN_WARNING "%s: No descriptor?!?\n", __func__); flush(ep); } } diff --git a/drivers/usb/host/isp116x.h b/drivers/usb/host/isp116x.h index aa211ba..12db961 100644 --- a/drivers/usb/host/isp116x.h +++ b/drivers/usb/host/isp116x.h @@ -563,7 +563,7 @@ static void urb_dbg(struct urb *urb, char *msg) */ static inline void dump_ptd(struct ptd *ptd) { - printk("td: %x %d%c%d %d,%d,%d %x %x%x%x\n", + printk(KERN_WARNING "td: %x %d%c%d %d,%d,%d %x %x%x%x\n", PTD_GET_CC(ptd), PTD_GET_FA(ptd), PTD_DIR_STR(ptd), PTD_GET_EP(ptd), PTD_GET_COUNT(ptd), PTD_GET_LEN(ptd), PTD_GET_MPS(ptd), @@ -576,7 +576,7 @@ static inline void dump_ptd_out_data(struct ptd *ptd, u8 * buf) int k; if (PTD_GET_DIR(ptd) != PTD_DIR_IN && PTD_GET_LEN(ptd)) { - printk("-> "); + printk(KERN_WARNING "-> "); for (k = 0; k < PTD_GET_LEN(ptd); ++k) printk("%02x ", ((u8 *) buf)[k]); printk("\n"); @@ -588,13 +588,13 @@ static inline void dump_ptd_in_data(struct ptd *ptd, u8 * buf) int k; if (PTD_GET_DIR(ptd) == PTD_DIR_IN && PTD_GET_COUNT(ptd)) { - printk("<- "); + printk(KERN_WARNING "<- "); for (k = 0; k < PTD_GET_COUNT(ptd); ++k) printk("%02x ", ((u8 *) buf)[k]); printk("\n"); } if (PTD_GET_LAST(ptd)) - printk("-\n"); + printk(KERN_WARNING "-\n"); } #else diff --git a/drivers/usb/storage/alauda.c b/drivers/usb/storage/alauda.c index 8d3711a..5407411 100644 --- a/drivers/usb/storage/alauda.c +++ b/drivers/usb/storage/alauda.c @@ -307,7 +307,8 @@ static int alauda_init_media(struct us_data *us) data[0], data[1], data[2], data[3]); media_info = alauda_card_find_id(data[1]); if (media_info == NULL) { - printk("alauda_init_media: Unrecognised media signature: " + printk(KERN_WARNING + "alauda_init_media: Unrecognised media signature: " "%02X %02X %02X %02X\n", data[0], data[1], data[2], data[3]); return USB_STOR_TRANSPORT_ERROR; @@ -518,7 +519,8 @@ static int alauda_read_map(struct us_data *us, unsigned int zone) /* check even parity */ if (parity[data[6] ^ data[7]]) { - printk("alauda_read_map: Bad parity in LBA for block %d" + printk(KERN_WARNING + "alauda_read_map: Bad parity in LBA for block %d" " (%02X %02X)\n", i, data[6], data[7]); pba_to_lba[i] = UNUSABLE; continue; @@ -538,13 +540,16 @@ static int alauda_read_map(struct us_data *us, unsigned int zone) */ if (lba_offset >= uzonesize) { - printk("alauda_read_map: Bad low LBA %d for block %d\n", + printk(KERN_WARNING + "alauda_read_map: Bad low LBA %d for block %d\n", lba_real, blocknum); continue; } if (lba_to_pba[lba_offset] != UNDEF) { - printk("alauda_read_map: LBA %d seen for PBA %d and %d\n", + printk(KERN_WARNING + "alauda_read_map: " + "LBA %d seen for PBA %d and %d\n", lba_real, lba_to_pba[lba_offset], blocknum); continue; } @@ -712,13 +717,15 @@ static int alauda_write_lba(struct us_data *us, u16 lba, if (pba == 1) { /* Maybe it is impossible to write to PBA 1. Fake success, but don't do anything. */ - printk("alauda_write_lba: avoid writing to pba 1\n"); + printk(KERN_WARNING + "alauda_write_lba: avoid writing to pba 1\n"); return USB_STOR_TRANSPORT_GOOD; } new_pba = alauda_find_unused_pba(&MEDIA_INFO(us), zone); if (!new_pba) { - printk("alauda_write_lba: Out of unused blocks\n"); + printk(KERN_WARNING + "alauda_write_lba: Out of unused blocks\n"); return USB_STOR_TRANSPORT_ERROR; } @@ -818,7 +825,7 @@ static int alauda_read_data(struct us_data *us, unsigned long address, len = min(sectors, blocksize) * (pagesize + 64); buffer = kmalloc(len, GFP_NOIO); if (buffer == NULL) { - printk("alauda_read_data: Out of memory\n"); + printk(KERN_WARNING "alauda_read_data: Out of memory\n"); return USB_STOR_TRANSPORT_ERROR; } @@ -911,7 +918,7 @@ static int alauda_write_data(struct us_data *us, unsigned long address, len = min(sectors, blocksize) * pagesize; buffer = kmalloc(len, GFP_NOIO); if (buffer == NULL) { - printk("alauda_write_data: Out of memory\n"); + printk(KERN_WARNING "alauda_write_data: Out of memory\n"); return USB_STOR_TRANSPORT_ERROR; } @@ -921,7 +928,7 @@ static int alauda_write_data(struct us_data *us, unsigned long address, */ blockbuffer = kmalloc((pagesize + 64) * blocksize, GFP_NOIO); if (blockbuffer == NULL) { - printk("alauda_write_data: Out of memory\n"); + printk(KERN_WARNING "alauda_write_data: Out of memory\n"); kfree(buffer); return USB_STOR_TRANSPORT_ERROR; } diff --git a/drivers/usb/storage/sddr09.c b/drivers/usb/storage/sddr09.c index 531ae5c..b667c7d 100644 --- a/drivers/usb/storage/sddr09.c +++ b/drivers/usb/storage/sddr09.c @@ -723,7 +723,7 @@ sddr09_read_data(struct us_data *us, len = min(sectors, (unsigned int) info->blocksize) * info->pagesize; buffer = kmalloc(len, GFP_NOIO); if (buffer == NULL) { - printk("sddr09_read_data: Out of memory\n"); + printk(KERN_WARNING "sddr09_read_data: Out of memory\n"); return -ENOMEM; } @@ -838,7 +838,8 @@ sddr09_write_lba(struct us_data *us, unsigned int lba, if (pba == UNDEF) { pba = sddr09_find_unused_pba(info, lba); if (!pba) { - printk("sddr09_write_lba: Out of unused blocks\n"); + printk(KERN_WARNING + "sddr09_write_lba: Out of unused blocks\n"); return -ENOSPC; } info->pba_to_lba[pba] = lba; @@ -849,7 +850,7 @@ sddr09_write_lba(struct us_data *us, unsigned int lba, if (pba == 1) { /* Maybe it is impossible to write to PBA 1. Fake success, but don't do anything. */ - printk("sddr09: avoid writing to pba 1\n"); + printk(KERN_WARNING "sddr09: avoid writing to pba 1\n"); return 0; } @@ -954,7 +955,7 @@ sddr09_write_data(struct us_data *us, blocklen = (pagelen << info->blockshift); blockbuffer = kmalloc(blocklen, GFP_NOIO); if (!blockbuffer) { - printk("sddr09_write_data: Out of memory\n"); + printk(KERN_WARNING "sddr09_write_data: Out of memory\n"); return -ENOMEM; } @@ -965,7 +966,7 @@ sddr09_write_data(struct us_data *us, len = min(sectors, (unsigned int) info->blocksize) * info->pagesize; buffer = kmalloc(len, GFP_NOIO); if (buffer == NULL) { - printk("sddr09_write_data: Out of memory\n"); + printk(KERN_WARNING "sddr09_write_data: Out of memory\n"); kfree(blockbuffer); return -ENOMEM; } @@ -1112,7 +1113,7 @@ sddr09_get_cardinfo(struct us_data *us, unsigned char flags) { if (result) { US_DEBUGP("Result of read_deviceID is %d\n", result); - printk("sddr09: could not read card info\n"); + printk(KERN_WARNING "sddr09: could not read card info\n"); return NULL; } @@ -1153,7 +1154,7 @@ sddr09_get_cardinfo(struct us_data *us, unsigned char flags) { sprintf(blurbtxt + strlen(blurbtxt), ", WP"); - printk("%s\n", blurbtxt); + printk(KERN_WARNING "%s\n", blurbtxt); return cardinfo; } @@ -1184,7 +1185,7 @@ sddr09_read_map(struct us_data *us) { alloc_len = (alloc_blocks << CONTROL_SHIFT); buffer = kmalloc(alloc_len, GFP_NOIO); if (buffer == NULL) { - printk("sddr09_read_map: out of memory\n"); + printk(KERN_WARNING "sddr09_read_map: out of memory\n"); result = -1; goto done; } @@ -1198,7 +1199,7 @@ sddr09_read_map(struct us_data *us) { info->pba_to_lba = kmalloc(numblocks*sizeof(int), GFP_NOIO); if (info->lba_to_pba == NULL || info->pba_to_lba == NULL) { - printk("sddr09_read_map: out of memory\n"); + printk(KERN_WARNING "sddr09_read_map: out of memory\n"); result = -1; goto done; } @@ -1238,7 +1239,8 @@ sddr09_read_map(struct us_data *us) { if (ptr[j] != 0) goto nonz; info->pba_to_lba[i] = UNUSABLE; - printk("sddr09: PBA %d has no logical mapping\n", i); + printk(KERN_WARNING "sddr09: PBA %d has no logical mapping\n", + i); continue; nonz: @@ -1251,7 +1253,8 @@ sddr09_read_map(struct us_data *us) { nonff: /* normal PBAs start with six FFs */ if (j < 6) { - printk("sddr09: PBA %d has no logical mapping: " + printk(KERN_WARNING + "sddr09: PBA %d has no logical mapping: " "reserved area = %02X%02X%02X%02X " "data status %02X block status %02X\n", i, ptr[0], ptr[1], ptr[2], ptr[3], @@ -1261,7 +1264,8 @@ sddr09_read_map(struct us_data *us) { } if ((ptr[6] >> 4) != 0x01) { - printk("sddr09: PBA %d has invalid address field " + printk(KERN_WARNING + "sddr09: PBA %d has invalid address field " "%02X%02X/%02X%02X\n", i, ptr[6], ptr[7], ptr[11], ptr[12]); info->pba_to_lba[i] = UNUSABLE; @@ -1270,7 +1274,8 @@ sddr09_read_map(struct us_data *us) { /* check even parity */ if (parity[ptr[6] ^ ptr[7]]) { - printk("sddr09: Bad parity in LBA for block %d" + printk(KERN_WARNING + "sddr09: Bad parity in LBA for block %d" " (%02X %02X)\n", i, ptr[6], ptr[7]); info->pba_to_lba[i] = UNUSABLE; continue; @@ -1289,7 +1294,8 @@ sddr09_read_map(struct us_data *us) { */ if (lba >= 1000) { - printk("sddr09: Bad low LBA %d for block %d\n", + printk(KERN_WARNING + "sddr09: Bad low LBA %d for block %d\n", lba, i); goto possibly_erase; } @@ -1297,7 +1303,8 @@ sddr09_read_map(struct us_data *us) { lba += 1000*(i/0x400); if (info->lba_to_pba[lba] != UNDEF) { - printk("sddr09: LBA %d seen for PBA %d and %d\n", + printk(KERN_WARNING + "sddr09: LBA %d seen for PBA %d and %d\n", lba, info->lba_to_pba[lba], i); goto possibly_erase; } diff --git a/drivers/usb/storage/sddr55.c b/drivers/usb/storage/sddr55.c index 0d8df75..5a0106b 100644 --- a/drivers/usb/storage/sddr55.c +++ b/drivers/usb/storage/sddr55.c @@ -703,7 +703,9 @@ static int sddr55_read_map(struct us_data *us) { if (info->lba_to_pba[lba + zone * 1000] != NOT_ALLOCATED && !info->force_read_only) { - printk("sddr55: map inconsistency at LBA %04X\n", lba + zone * 1000); + printk(KERN_WARNING + "sddr55: map inconsistency at LBA %04X\n", + lba + zone * 1000); info->force_read_only = 1; } -- cgit v1.1 From 5d1ca6cf7f80644b07c348d6be870ccd8e3a92ed Mon Sep 17 00:00:00 2001 From: David Brownell Date: Fri, 6 Feb 2009 02:39:11 -0800 Subject: USB: ftdi_sio: remove pointless syslog spew Remove some pointless messages from the FTDI serial driver; I found these filling up syslog on one system. Also remove a pointless "break" after a "return" in the same area. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index d889216..adeb23f 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -2292,11 +2292,8 @@ static int ftdi_tiocmget(struct tty_struct *tty, struct file *file) FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE, 0, 0, buf, 1, WDR_TIMEOUT); - if (ret < 0) { - dbg("%s Could not get modem status of device - err: %d", __func__, - ret); + if (ret < 0) return ret; - } break; case FT8U232AM: case FT232BM: @@ -2311,15 +2308,11 @@ static int ftdi_tiocmget(struct tty_struct *tty, struct file *file) FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE, 0, priv->interface, buf, 2, WDR_TIMEOUT); - if (ret < 0) { - dbg("%s Could not get modem status of device - err: %d", __func__, - ret); + if (ret < 0) return ret; - } break; default: return -EFAULT; - break; } return (buf[0] & FTDI_SIO_DSR_MASK ? TIOCM_DSR : 0) | -- cgit v1.1 From f6d92a05c86754d62eabc84856d2035d0de3ddc3 Mon Sep 17 00:00:00 2001 From: Ajay Kumar Gupta Date: Fri, 6 Feb 2009 17:32:35 +0530 Subject: USB: otg: adding nop usb transceiver NOP transceiver is used by all the usb transceiver which are mostly autonomous and doesn't require any programming or which are built into the usb ip itself.NOP transceiver only allocates the memory for struct xceiv and calls otg_set_transceiver() so function call to otg_get_transceiver() will return a valid transceiver. NOP transceiver device should be registered by calling usb_nop_xceiv_register() from platform files. Signed-off-by: Ajay Kumar Gupta Cc: Felipe Balbi Cc: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/otg/Kconfig | 8 ++ drivers/usb/otg/Makefile | 1 + drivers/usb/otg/nop-usb-xceiv.c | 180 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 189 insertions(+) create mode 100644 drivers/usb/otg/nop-usb-xceiv.c (limited to 'drivers/usb') diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig index ee55b44..fc1ca03 100644 --- a/drivers/usb/otg/Kconfig +++ b/drivers/usb/otg/Kconfig @@ -51,4 +51,12 @@ config TWL4030_USB This transceiver supports high and full speed devices plus, in host mode, low speed. +config NOP_USB_XCEIV + tristate "NOP USB Transceiver Driver" + select USB_OTG_UTILS + help + this driver is to be used by all the usb transceiver which are either + built-in with usb ip or which are autonomous and doesn't require any + phy programming such as ISP1x04 etc. + endif # USB || OTG diff --git a/drivers/usb/otg/Makefile b/drivers/usb/otg/Makefile index d73c7cf..2081678 100644 --- a/drivers/usb/otg/Makefile +++ b/drivers/usb/otg/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_USB_OTG_UTILS) += otg.o obj-$(CONFIG_USB_GPIO_VBUS) += gpio_vbus.o obj-$(CONFIG_ISP1301_OMAP) += isp1301_omap.o obj-$(CONFIG_TWL4030_USB) += twl4030-usb.o +obj-$(CONFIG_NOP_USB_XCEIV) += nop-usb-xceiv.o ccflags-$(CONFIG_USB_DEBUG) += -DDEBUG ccflags-$(CONFIG_USB_GADGET_DEBUG) += -DDEBUG diff --git a/drivers/usb/otg/nop-usb-xceiv.c b/drivers/usb/otg/nop-usb-xceiv.c new file mode 100644 index 0000000..4b933f6 --- /dev/null +++ b/drivers/usb/otg/nop-usb-xceiv.c @@ -0,0 +1,180 @@ +/* + * drivers/usb/otg/nop-usb-xceiv.c + * + * NOP USB transceiver for all USB transceiver which are either built-in + * into USB IP or which are mostly autonomous. + * + * Copyright (C) 2009 Texas Instruments Inc + * Author: Ajay Kumar Gupta + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + * Current status: + * this is to add "nop" transceiver for all those phy which is + * autonomous such as isp1504 etc. + */ + +#include +#include +#include +#include + +struct nop_usb_xceiv { + struct otg_transceiver otg; + struct device *dev; +}; + +static u64 nop_xceiv_dmamask = DMA_32BIT_MASK; + +static struct platform_device nop_xceiv_device = { + .name = "nop_usb_xceiv", + .id = -1, + .dev = { + .dma_mask = &nop_xceiv_dmamask, + .coherent_dma_mask = DMA_32BIT_MASK, + .platform_data = NULL, + }, +}; + +void usb_nop_xceiv_register(void) +{ + if (platform_device_register(&nop_xceiv_device) < 0) { + printk(KERN_ERR "Unable to register usb nop transceiver\n"); + return; + } +} + +void usb_nop_xceiv_unregister(void) +{ + platform_device_unregister(&nop_xceiv_device); +} + +static inline struct nop_usb_xceiv *xceiv_to_nop(struct otg_transceiver *x) +{ + return container_of(x, struct nop_usb_xceiv, otg); +} + +static int nop_set_suspend(struct otg_transceiver *x, int suspend) +{ + return 0; +} + +static int nop_set_peripheral(struct otg_transceiver *x, + struct usb_gadget *gadget) +{ + struct nop_usb_xceiv *nop; + + if (!x) + return -ENODEV; + + nop = xceiv_to_nop(x); + + if (!gadget) { + nop->otg.gadget = NULL; + return -ENODEV; + } + + nop->otg.gadget = gadget; + nop->otg.state = OTG_STATE_B_IDLE; + return 0; +} + +static int nop_set_host(struct otg_transceiver *x, struct usb_bus *host) +{ + struct nop_usb_xceiv *nop; + + if (!x) + return -ENODEV; + + nop = xceiv_to_nop(x); + + if (!host) { + nop->otg.host = NULL; + return -ENODEV; + } + + nop->otg.host = host; + return 0; +} + +static int __devinit nop_usb_xceiv_probe(struct platform_device *pdev) +{ + struct nop_usb_xceiv *nop; + int err; + + nop = kzalloc(sizeof *nop, GFP_KERNEL); + if (!nop) + return -ENOMEM; + + nop->dev = &pdev->dev; + nop->otg.dev = nop->dev; + nop->otg.label = "nop-xceiv"; + nop->otg.state = OTG_STATE_UNDEFINED; + nop->otg.set_host = nop_set_host; + nop->otg.set_peripheral = nop_set_peripheral; + nop->otg.set_suspend = nop_set_suspend; + + err = otg_set_transceiver(&nop->otg); + if (err) { + dev_err(&pdev->dev, "can't register transceiver, err: %d\n", + err); + goto exit; + } + + platform_set_drvdata(pdev, nop); + + return 0; +exit: + kfree(nop); + return err; +} + +static int __devexit nop_usb_xceiv_remove(struct platform_device *pdev) +{ + struct nop_usb_xceiv *nop = platform_get_drvdata(pdev); + + otg_set_transceiver(NULL); + + platform_set_drvdata(pdev, NULL); + kfree(nop); + + return 0; +} + +static struct platform_driver nop_usb_xceiv_driver = { + .probe = nop_usb_xceiv_probe, + .remove = __devexit_p(nop_usb_xceiv_remove), + .driver = { + .name = "nop_usb_xceiv", + .owner = THIS_MODULE, + }, +}; + +static int __init nop_usb_xceiv_init(void) +{ + return platform_driver_register(&nop_usb_xceiv_driver); +} +subsys_initcall(nop_usb_xceiv_init); + +static void __exit nop_usb_xceiv_exit(void) +{ + platform_driver_unregister(&nop_usb_xceiv_driver); +} +module_exit(nop_usb_xceiv_exit); + +MODULE_ALIAS("platform:nop_usb_xceiv"); +MODULE_AUTHOR("Texas Instruments Inc"); +MODULE_DESCRIPTION("NOP USB Transceiver driver"); +MODULE_LICENSE("GPL"); -- cgit v1.1 From 648d4e16567eae4c643bd2125e91128f06c0d3ad Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 6 Feb 2009 18:30:56 -0800 Subject: USB: serial: opticon: add write support This patch allows data to be sent to the scanner. Cc: Kees Stoop Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/opticon.c | 124 ++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 122 insertions(+), 2 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index 00d5c60..8c87a49 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -1,8 +1,8 @@ /* * Opticon USB barcode to serial driver * - * Copyright (C) 2008 Greg Kroah-Hartman - * Copyright (C) 2008 Novell Inc. + * Copyright (C) 2008 - 2009 Greg Kroah-Hartman + * Copyright (C) 2008 - 2009 Novell Inc. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License version @@ -40,8 +40,12 @@ struct opticon_private { bool throttled; bool actually_throttled; bool rts; + int outstanding_urbs; }; +/* max number of write urbs in flight */ +#define URB_UPPER_LIMIT 4 + static void opticon_bulk_callback(struct urb *urb) { struct opticon_private *priv = urb->context; @@ -188,6 +192,120 @@ static void opticon_close(struct tty_struct *tty, struct usb_serial_port *port, usb_kill_urb(priv->bulk_read_urb); } +static void opticon_write_bulk_callback(struct urb *urb) +{ + struct opticon_private *priv = urb->context; + int status = urb->status; + unsigned long flags; + + /* free up the transfer buffer, as usb_free_urb() does not do this */ + kfree(urb->transfer_buffer); + + if (status) + dbg("%s - nonzero write bulk status received: %d", + __func__, status); + + spin_lock_irqsave(&priv->lock, flags); + --priv->outstanding_urbs; + spin_unlock_irqrestore(&priv->lock, flags); + + usb_serial_port_softint(priv->port); +} + +static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port, + const unsigned char *buf, int count) +{ + struct opticon_private *priv = usb_get_serial_data(port->serial); + struct usb_serial *serial = port->serial; + struct urb *urb; + unsigned char *buffer; + unsigned long flags; + int status; + + dbg("%s - port %d", __func__, port->number); + + spin_lock_irqsave(&priv->lock, flags); + if (priv->outstanding_urbs > URB_UPPER_LIMIT) { + spin_unlock_irqrestore(&priv->lock, flags); + dbg("%s - write limit hit\n", __func__); + return 0; + } + priv->outstanding_urbs++; + spin_unlock_irqrestore(&priv->lock, flags); + + buffer = kmalloc(count, GFP_ATOMIC); + if (!buffer) { + dev_err(&port->dev, "out of memory\n"); + count = -ENOMEM; + goto error_no_buffer; + } + + urb = usb_alloc_urb(0, GFP_ATOMIC); + if (!urb) { + dev_err(&port->dev, "no more free urbs\n"); + count = -ENOMEM; + goto error_no_urb; + } + + memcpy(buffer, buf, count); + + usb_serial_debug_data(debug, &port->dev, __func__, count, buffer); + + usb_fill_bulk_urb(urb, serial->dev, + usb_sndbulkpipe(serial->dev, + port->bulk_out_endpointAddress), + buffer, count, opticon_write_bulk_callback, priv); + + /* send it down the pipe */ + status = usb_submit_urb(urb, GFP_ATOMIC); + if (status) { + dev_err(&port->dev, + "%s - usb_submit_urb(write bulk) failed with status = %d\n", + __func__, status); + count = status; + goto error; + } + + /* we are done with this urb, so let the host driver + * really free it when it is finished with it */ + usb_free_urb(urb); + + return count; +error: + usb_free_urb(urb); +error_no_urb: + kfree(buffer); +error_no_buffer: + spin_lock_irqsave(&priv->lock, flags); + --priv->outstanding_urbs; + spin_unlock_irqrestore(&priv->lock, flags); + return count; +} + +static int opticon_write_room(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct opticon_private *priv = usb_get_serial_data(port->serial); + unsigned long flags; + + dbg("%s - port %d", __func__, port->number); + + /* + * We really can take almost anything the user throws at us + * but let's pick a nice big number to tell the tty + * layer that we have lots of free space, unless we don't. + */ + spin_lock_irqsave(&priv->lock, flags); + if (priv->outstanding_urbs > URB_UPPER_LIMIT * 2 / 3) { + spin_unlock_irqrestore(&priv->lock, flags); + dbg("%s - write limit hit\n", __func__); + return 0; + } + spin_unlock_irqrestore(&priv->lock, flags); + + return 2048; +} + static void opticon_throttle(struct tty_struct *tty) { struct usb_serial_port *port = tty->driver_data; @@ -352,6 +470,8 @@ static struct usb_serial_driver opticon_device = { .attach = opticon_startup, .open = opticon_open, .close = opticon_close, + .write = opticon_write, + .write_room = opticon_write_room, .shutdown = opticon_shutdown, .throttle = opticon_throttle, .unthrottle = opticon_unthrottle, -- cgit v1.1 From faac64ad9c7b1aa56a10be6b5f9b813789e81dfd Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 6 Feb 2009 18:31:46 -0800 Subject: USB: serial: opticon: add serial line ioctls This lets userspace determine what the state of the RTS line is, which is what is needed to properly handle data flow for this device (it raises RTS when there is data to be sent from it.) Cc: Kees Stoop Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/opticon.c | 65 +++++++++++++++++++++++++++++++++++++++++++- 1 file changed, 64 insertions(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index 8c87a49..839583d 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -14,6 +14,7 @@ #include #include #include +#include #include #include #include @@ -110,7 +111,6 @@ static void opticon_bulk_callback(struct urb *urb) priv->rts = false; else priv->rts = true; - /* FIXME change the RTS level */ } else { dev_dbg(&priv->udev->dev, "Unknown data packet received from the device:" @@ -341,6 +341,67 @@ static void opticon_unthrottle(struct tty_struct *tty) __func__, result); } +static int opticon_tiocmget(struct tty_struct *tty, struct file *file) +{ + struct usb_serial_port *port = tty->driver_data; + struct opticon_private *priv = usb_get_serial_data(port->serial); + unsigned long flags; + int result = 0; + + dbg("%s - port %d", __func__, port->number); + + spin_lock_irqsave(&priv->lock, flags); + if (priv->rts) + result = TIOCM_RTS; + spin_unlock_irqrestore(&priv->lock, flags); + + dbg("%s - %x", __func__, result); + return result; +} + +static int get_serial_info(struct opticon_private *priv, + struct serial_struct __user *serial) +{ + struct serial_struct tmp; + + if (!serial) + return -EFAULT; + + memset(&tmp, 0x00, sizeof(tmp)); + + /* fake emulate a 16550 uart to make userspace code happy */ + tmp.type = PORT_16550A; + tmp.line = priv->serial->minor; + tmp.port = 0; + tmp.irq = 0; + tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ; + tmp.xmit_fifo_size = 1024; + tmp.baud_base = 9600; + tmp.close_delay = 5*HZ; + tmp.closing_wait = 30*HZ; + + if (copy_to_user(serial, &tmp, sizeof(*serial))) + return -EFAULT; + return 0; +} + +static int opticon_ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg) +{ + struct usb_serial_port *port = tty->driver_data; + struct opticon_private *priv = usb_get_serial_data(port->serial); + + dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd); + + switch (cmd) { + case TIOCGSERIAL: + return get_serial_info(priv, + (struct serial_struct __user *)arg); + } + + return -ENOIOCTLCMD; +} + static int opticon_startup(struct usb_serial *serial) { struct opticon_private *priv; @@ -475,6 +536,8 @@ static struct usb_serial_driver opticon_device = { .shutdown = opticon_shutdown, .throttle = opticon_throttle, .unthrottle = opticon_unthrottle, + .ioctl = opticon_ioctl, + .tiocmget = opticon_tiocmget, }; static int __init opticon_init(void) -- cgit v1.1 From 0eb526b96ced3759e7d4445fc55204f314e33d8c Mon Sep 17 00:00:00 2001 From: Borislav Petkov Date: Sat, 7 Feb 2009 20:20:42 +0100 Subject: usb_storage: make Kconfig note visible in the console Make lines about usb_storage depending on SCSI visible when configuring the kernel in a 80x25 console Signed-off-by: Borislav Petkov Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/Kconfig | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index 9df6887..5c36756 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -2,8 +2,8 @@ # USB Storage driver configuration # -comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;" -comment "see USB_STORAGE Help for more information" +comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may" +comment "also be needed; see USB_STORAGE Help for more info" depends on USB config USB_STORAGE -- cgit v1.1 From a5f5ea230d70f5dde4d787208855fa3c3cd7b31e Mon Sep 17 00:00:00 2001 From: Matt Kraai Date: Fri, 6 Feb 2009 19:38:51 -0800 Subject: USB: skeleton: Use dev_info instead of info 338b67b0c1a97ca705023a8189cf41aa0828d294 removed the info macro and replaced its uses with dev_info. This patch does so for usb-skeleton.c, which was missed. Signed-off-by: Matt Kraai Signed-off-by: Greg Kroah-Hartman --- drivers/usb/usb-skeleton.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/usb-skeleton.c b/drivers/usb/usb-skeleton.c index be76084..60ba631 100644 --- a/drivers/usb/usb-skeleton.c +++ b/drivers/usb/usb-skeleton.c @@ -410,7 +410,9 @@ static int skel_probe(struct usb_interface *interface, const struct usb_device_i } /* let the user know what node this device is now attached to */ - info("USB Skeleton device now attached to USBSkel-%d", interface->minor); + dev_info(&interface->dev, + "USB Skeleton device now attached to USBSkel-%d", + interface->minor); return 0; error: @@ -441,7 +443,7 @@ static void skel_disconnect(struct usb_interface *interface) /* decrement our usage count */ kref_put(&dev->kref, skel_delete); - info("USB Skeleton #%d now disconnected", minor); + dev_info(&interface->dev, "USB Skeleton #%d now disconnected", minor); } static void skel_draw_down(struct usb_skel *dev) -- cgit v1.1 From 1c27ae671e6b465e04544450276c88f4dba8de60 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Mon, 9 Feb 2009 10:03:49 +0100 Subject: USB: serial: remove recourse to generic method This removes the fallback to the generic method. It is cleaner to explicitely request it. Introducing this was my mistake. This will be solved by an explicit test and the driver being allowed to request what it needs to be done upon resumption. Signed-off-by: Oliver Neukum Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/usb-serial.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 18f9408..9a26178 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -1229,7 +1229,6 @@ static void fixup_generic(struct usb_serial_driver *device) set_to_generic_if_null(device, read_bulk_callback); set_to_generic_if_null(device, write_bulk_callback); set_to_generic_if_null(device, shutdown); - set_to_generic_if_null(device, resume); } int usb_serial_register(struct usb_serial_driver *driver) -- cgit v1.1 From 331879fd6f584d60327ba802616d41bfa636b873 Mon Sep 17 00:00:00 2001 From: James Woodcock Date: Wed, 11 Feb 2009 15:06:53 +0000 Subject: USB: serial: refuse to open recently removed USB Serial devices A USB-serial converter device is plugged into a system, and a process opens it's device node. If the device is physically removed whilst the process still has its device node open, then other processes can sucessfully open the now non-existent device's node. I would expect that open() on a device that has been physically removed should return ENODEV. This is manifesting itself with getty on my system. I do the following: 1. set up inittab to spawn getty on ttyUSB0, eg: T1:23:respawn:/sbin/getty -L ttyUSB0 115200 vt100 2. Plug in USB-serial converter cable 3. Wait for a login prompt on a terminal program attached to the serial cable 4. Login 5. Pull the USB-serial converter cable from the box 6. getty doesn't realise that ttyUSB0 no longer exists as /dev/ttyUSB0 can still be opened. 7. Re-insert the USB-serial converter cable 8. You should no longer get a login prompt over the serial cable, as the the USB-serial cable now shows up as /dev/ttyUSB1, and getty is trying to talk to /dev/ttyUSB0. The attached patch will cause open("/dev/ttyUSB0", O_RDONLY) to return ENODEV after the USB-serial converter has been pulled. The patch was created against 2.6.28.1. I can supply it against something else if needs be. It is fairly simple, so should be OK. I am using a pl2303 device, although I don't think that makes any difference. From: James Woodcock Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/usb-serial.c | 5 +++++ 1 file changed, 5 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 9a26178..7317289 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -204,6 +204,11 @@ static int serial_open (struct tty_struct *tty, struct file *filp) goto bailout_kref_put; } + if (port->serial->disconnected) { + retval = -ENODEV; + goto bailout_kref_put; + } + if (mutex_lock_interruptible(&port->mutex)) { retval = -ERESTARTSYS; goto bailout_kref_put; -- cgit v1.1 From b967c88ed1b48bc353ea83e0cacb2249a3bb1a51 Mon Sep 17 00:00:00 2001 From: Thierry Vignaud Date: Wed, 11 Feb 2009 13:31:05 -0800 Subject: usb: kill prehistorical comments about USB_EHCI_HCD Remove old comments about USB_EHCI_HCD. Cc: Alan Stern Signed-off-by: Andrew Morton Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/Kconfig | 5 +---- 1 file changed, 1 insertion(+), 4 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 2c63bfb..c1cfed7 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -24,10 +24,7 @@ config USB_EHCI_HCD The Enhanced Host Controller Interface (EHCI) is standard for USB 2.0 "high speed" (480 Mbit/sec, 60 Mbyte/sec) host controller hardware. If your USB host controller supports USB 2.0, you will likely want to - configure this Host Controller Driver. At the time of this writing, - the primary implementation of EHCI is a chip from NEC, widely available - in add-on PCI cards, but implementations are in the works from other - vendors including Intel and Philips. Motherboard support is appearing. + configure this Host Controller Driver. EHCI controllers are packaged with "companion" host controllers (OHCI or UHCI) to handle USB 1.1 devices connected to root hub ports. Ports -- cgit v1.1 From bc29847e16cb6b571157220ec9b20a7d86e58046 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 11 Feb 2009 14:26:38 -0500 Subject: USB: EHCI: Make timer_action out-of-line This patch (as1205) moves timer_action() from ehci.h to ehci-hcd.c and makes it out-of-line. Over the years it has grown too big to be inline any more. Signed-off-by: Alan Stern Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-hcd.c | 36 ++++++++++++++++++++++++++++++++++++ drivers/usb/host/ehci.h | 34 ---------------------------------- 2 files changed, 36 insertions(+), 34 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index e551bb3..f2618d1 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -110,6 +110,42 @@ MODULE_PARM_DESC (ignore_oc, "ignore bogus hardware overcurrent indications"); /*-------------------------------------------------------------------------*/ +static void +timer_action(struct ehci_hcd *ehci, enum ehci_timer_action action) +{ + /* Don't override timeouts which shrink or (later) disable + * the async ring; just the I/O watchdog. Note that if a + * SHRINK were pending, OFF would never be requested. + */ + if (timer_pending(&ehci->watchdog) + && ((BIT(TIMER_ASYNC_SHRINK) | BIT(TIMER_ASYNC_OFF)) + & ehci->actions)) + return; + + if (!test_and_set_bit(action, &ehci->actions)) { + unsigned long t; + + switch (action) { + case TIMER_IO_WATCHDOG: + t = EHCI_IO_JIFFIES; + break; + case TIMER_ASYNC_OFF: + t = EHCI_ASYNC_JIFFIES; + break; + /* case TIMER_ASYNC_SHRINK: */ + default: + /* add a jiffie since we synch against the + * 8 KHz uframe counter. + */ + t = DIV_ROUND_UP(EHCI_SHRINK_FRAMES * HZ, 1000) + 1; + break; + } + mod_timer(&ehci->watchdog, t + jiffies); + } +} + +/*-------------------------------------------------------------------------*/ + /* * handshake - spin reading hc until handshake completes or fails * @ptr: address of hc register to be read diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index 262b00c..0042deb 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -190,40 +190,6 @@ timer_action_done (struct ehci_hcd *ehci, enum ehci_timer_action action) clear_bit (action, &ehci->actions); } -static inline void -timer_action (struct ehci_hcd *ehci, enum ehci_timer_action action) -{ - /* Don't override timeouts which shrink or (later) disable - * the async ring; just the I/O watchdog. Note that if a - * SHRINK were pending, OFF would never be requested. - */ - if (timer_pending(&ehci->watchdog) - && ((BIT(TIMER_ASYNC_SHRINK) | BIT(TIMER_ASYNC_OFF)) - & ehci->actions)) - return; - - if (!test_and_set_bit (action, &ehci->actions)) { - unsigned long t; - - switch (action) { - case TIMER_IO_WATCHDOG: - t = EHCI_IO_JIFFIES; - break; - case TIMER_ASYNC_OFF: - t = EHCI_ASYNC_JIFFIES; - break; - // case TIMER_ASYNC_SHRINK: - default: - /* add a jiffie since we synch against the - * 8 KHz uframe counter. - */ - t = DIV_ROUND_UP(EHCI_SHRINK_FRAMES * HZ, 1000) + 1; - break; - } - mod_timer(&ehci->watchdog, t + jiffies); - } -} - static void free_cached_itd_list(struct ehci_hcd *ehci); /*-------------------------------------------------------------------------*/ -- cgit v1.1 From 1f4159c1620f74377e26d8a569d10ca5907ef475 Mon Sep 17 00:00:00 2001 From: Boaz Harrosh Date: Wed, 11 Feb 2009 09:54:31 +0200 Subject: USB: fix USB_STORAGE_CYPRESS_ATACB commit 64a87b24: [SCSI] Let scsi_cmnd->cmnd use request->cmd buffer changed the scsi_eh_prep_cmnd logic by making it clear the ->cmnd buffer. But the sat to cypress atacb translation supposed the ->cmnd buffer wasn't modified. This patch makes it set the ->cmnd buffer after scsi_eh_prep_cmnd call. The problem and a fix was reported by Matthieu CASTET It also removes all the hackery fiddling of scsi_cmnd and scsi_eh_save by requesting from scsi_eh_prep_cmnd to prepare a read into ->sense_buffer, which is much more suitable a buffer for HW transfers, then after the command execution the regs read is copied into regs buffer before actual preparation of sense_buffer. Also fix an alien comment character to my utf-8 editor. Signed-off-by: Boaz Harrosh Signed-off-by: Matthieu CASTET Cc: stable Cc: James Bottomley Cc: Matthew Dharm Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/cypress_atacb.c | 15 +++++++-------- 1 file changed, 7 insertions(+), 8 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/storage/cypress_atacb.c b/drivers/usb/storage/cypress_atacb.c index 898e67d..9466a99 100644 --- a/drivers/usb/storage/cypress_atacb.c +++ b/drivers/usb/storage/cypress_atacb.c @@ -133,19 +133,18 @@ void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us) /* build the command for * reading the ATA registers */ - scsi_eh_prep_cmnd(srb, &ses, NULL, 0, 0); - srb->sdb.length = sizeof(regs); - sg_init_one(&ses.sense_sgl, regs, srb->sdb.length); - srb->sdb.table.sgl = &ses.sense_sgl; - srb->sc_data_direction = DMA_FROM_DEVICE; - srb->sdb.table.nents = 1; + scsi_eh_prep_cmnd(srb, &ses, NULL, 0, sizeof(regs)); + /* we use the same command as before, but we set * the read taskfile bit, for not executing atacb command, * but reading register selected in srb->cmnd[4] */ + srb->cmd_len = 16; + srb->cmnd = ses.cmnd; srb->cmnd[2] = 1; usb_stor_transparent_scsi_command(srb, us); + memcpy(regs, srb->sense_buffer, sizeof(regs)); tmp_result = srb->result; scsi_eh_restore_cmnd(srb, &ses); /* we fail to get registers, report invalid command */ @@ -162,8 +161,8 @@ void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us) /* XXX we should generate sk, asc, ascq from status and error * regs - * (see 11.1 Error translation ­ ATA device error to SCSI error map) - * and ata_to_sense_error from libata. + * (see 11.1 Error translation ATA device error to SCSI error + * map, and ata_to_sense_error from libata.) */ /* Sense data is current and format is descriptor. */ -- cgit v1.1 From a2c2706e1043c17139c2dafd171c4a5cf008ef7e Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 10 Feb 2009 10:16:58 -0500 Subject: USB: EHCI: add software retry for transaction errors This patch (as1204) adds a software retry mechanism to ehci-hcd. It gets invoked when the driver encounters transaction errors on an asynchronous endpoint. On many systems, hardware deficiencies cause such errors to occur if one device is unplugged while the host is communicating with another device. With the patch, the failed transactions are retried and generally succeed the second or third time through. This is based on code originally written by Koichiro Saito. Signed-off-by: Alan Stern Tested by: Koichiro Saito CC: David Brownell Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-q.c | 32 ++++++++++++++++++++++++++++++++ drivers/usb/host/ehci.h | 3 +++ 2 files changed, 35 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index ecc9b66..01132ac 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -333,12 +333,40 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh) token = hc32_to_cpu(ehci, qtd->hw_token); /* always clean up qtds the hc de-activated */ + retry_xacterr: if ((token & QTD_STS_ACTIVE) == 0) { /* on STALL, error, and short reads this urb must * complete and all its qtds must be recycled. */ if ((token & QTD_STS_HALT) != 0) { + + /* retry transaction errors until we + * reach the software xacterr limit + */ + if ((token & QTD_STS_XACT) && + QTD_CERR(token) == 0 && + --qh->xacterrs > 0 && + !urb->unlinked) { + ehci_dbg(ehci, + "detected XactErr len %d/%d retry %d\n", + qtd->length - QTD_LENGTH(token), qtd->length, + QH_XACTERR_MAX - qh->xacterrs); + + /* reset the token in the qtd and the + * qh overlay (which still contains + * the qtd) so that we pick up from + * where we left off + */ + token &= ~QTD_STS_HALT; + token |= QTD_STS_ACTIVE | + (EHCI_TUNE_CERR << 10); + qtd->hw_token = cpu_to_hc32(ehci, + token); + wmb(); + qh->hw_token = cpu_to_hc32(ehci, token); + goto retry_xacterr; + } stopped = 1; /* magic dummy for some short reads; qh won't advance. @@ -421,6 +449,9 @@ halt: /* remove qtd; it's recycled after possible urb completion */ list_del (&qtd->qtd_list); last = qtd; + + /* reinit the xacterr counter for the next qtd */ + qh->xacterrs = QH_XACTERR_MAX; } /* last urb's completion might still need calling */ @@ -862,6 +893,7 @@ static void qh_link_async (struct ehci_hcd *ehci, struct ehci_qh *qh) head->qh_next.qh = qh; head->hw_next = dma; + qh->xacterrs = QH_XACTERR_MAX; qh->qh_state = QH_STATE_LINKED; /* qtd completions reported later by interrupt */ } diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index 0042deb..9aba560 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -342,6 +342,9 @@ struct ehci_qh { #define QH_STATE_UNLINK_WAIT 4 /* LINKED and on reclaim q */ #define QH_STATE_COMPLETING 5 /* don't touch token.HALT */ + u8 xacterrs; /* XactErr retry counter */ +#define QH_XACTERR_MAX 32 /* XactErr retry limit */ + /* periodic schedule info */ u8 usecs; /* intr bandwidth */ u8 gap_uf; /* uframes split/csplit gap */ -- cgit v1.1 From f9031f2c4237abfe75d9ad33f5c0f0dde96f7d09 Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Tue, 10 Feb 2009 16:55:45 +0000 Subject: USB: Make the isp1760_register function prototype more generic The patch changes the prototype of the isp1760_register() function to use predefined types like phys_addr_t and resource_size_t rather than u64 Signed-off-by: Catalin Marinas Cc: Sebastian Siewior Cc: Russell King Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/isp1760-hcd.c | 7 ++++--- drivers/usb/host/isp1760-hcd.h | 7 ++++--- 2 files changed, 8 insertions(+), 6 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c index b899f1a..8ee2f41 100644 --- a/drivers/usb/host/isp1760-hcd.c +++ b/drivers/usb/host/isp1760-hcd.c @@ -2235,9 +2235,10 @@ void deinit_kmem_cache(void) kmem_cache_destroy(qh_cachep); } -struct usb_hcd *isp1760_register(u64 res_start, u64 res_len, int irq, - u64 irqflags, struct device *dev, const char *busname, - unsigned int devflags) +struct usb_hcd *isp1760_register(phys_addr_t res_start, resource_size_t res_len, + int irq, unsigned long irqflags, + struct device *dev, const char *busname, + unsigned int devflags) { struct usb_hcd *hcd; struct isp1760_hcd *priv; diff --git a/drivers/usb/host/isp1760-hcd.h b/drivers/usb/host/isp1760-hcd.h index a9daea5..462f494 100644 --- a/drivers/usb/host/isp1760-hcd.h +++ b/drivers/usb/host/isp1760-hcd.h @@ -2,9 +2,10 @@ #define _ISP1760_HCD_H_ /* exports for if */ -struct usb_hcd *isp1760_register(u64 res_start, u64 res_len, int irq, - u64 irqflags, struct device *dev, const char *busname, - unsigned int devflags); +struct usb_hcd *isp1760_register(phys_addr_t res_start, resource_size_t res_len, + int irq, unsigned long irqflags, + struct device *dev, const char *busname, + unsigned int devflags); int init_kmem_once(void); void deinit_kmem_cache(void); -- cgit v1.1 From f7e7aa5850839faa5eb7c7c177da5fd6bca8949b Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Tue, 10 Feb 2009 16:55:51 +0000 Subject: USB: Add platform device support for the ISP1760 USB chip Currently, the driver only supports PCI and PPC_OF but there are boards like ARM RealView where this is a platform device. The patch adds the necessary functions and registration to the isp1760-if.c file and modifies the corresponding Makefile and Kconfig to be able to use this driver even if PCI and PPC_OF are not enabled. Signed-off-by: Catalin Marinas Cc: Sebastian Siewior Cc: Russell King Signed-off-by: Greg Kroah-Hartman --- drivers/usb/Makefile | 1 + drivers/usb/host/Kconfig | 2 +- drivers/usb/host/isp1760-if.c | 95 +++++++++++++++++++++++++++++++++++-------- 3 files changed, 81 insertions(+), 17 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index b2ceb4a..89299a5 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -19,6 +19,7 @@ obj-$(CONFIG_USB_SL811_HCD) += host/ obj-$(CONFIG_USB_U132_HCD) += host/ obj-$(CONFIG_USB_R8A66597_HCD) += host/ obj-$(CONFIG_USB_HWA_HCD) += host/ +obj-$(CONFIG_USB_ISP1760_HCD) += host/ obj-$(CONFIG_USB_C67X00_HCD) += c67x00/ diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index c1cfed7..845479f 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -120,7 +120,7 @@ config USB_ISP116X_HCD config USB_ISP1760_HCD tristate "ISP 1760 HCD support" - depends on USB && EXPERIMENTAL && (PCI || PPC_OF) + depends on USB && EXPERIMENTAL ---help--- The ISP1760 chip is a USB 2.0 host controller. diff --git a/drivers/usb/host/isp1760-if.c b/drivers/usb/host/isp1760-if.c index 4cf7ca4..3fa3a17 100644 --- a/drivers/usb/host/isp1760-if.c +++ b/drivers/usb/host/isp1760-if.c @@ -10,6 +10,7 @@ #include #include +#include #include "../core/hcd.h" #include "isp1760-hcd.h" @@ -300,39 +301,101 @@ static struct pci_driver isp1761_pci_driver = { }; #endif +static int __devinit isp1760_plat_probe(struct platform_device *pdev) +{ + int ret = 0; + struct usb_hcd *hcd; + struct resource *mem_res; + struct resource *irq_res; + resource_size_t mem_size; + unsigned long irqflags = IRQF_SHARED | IRQF_DISABLED; + + mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!mem_res) { + pr_warning("isp1760: Memory resource not available\n"); + ret = -ENODEV; + goto out; + } + mem_size = resource_size(mem_res); + if (!request_mem_region(mem_res->start, mem_size, "isp1760")) { + pr_warning("isp1760: Cannot reserve the memory resource\n"); + ret = -EBUSY; + goto out; + } + + irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (!irq_res) { + pr_warning("isp1760: IRQ resource not available\n"); + return -ENODEV; + } + irqflags |= irq_res->flags & IRQF_TRIGGER_MASK; + + hcd = isp1760_register(mem_res->start, mem_size, irq_res->start, + irqflags, &pdev->dev, dev_name(&pdev->dev), 0); + if (IS_ERR(hcd)) { + pr_warning("isp1760: Failed to register the HCD device\n"); + ret = -ENODEV; + goto cleanup; + } + + pr_info("ISP1760 USB device initialised\n"); + return ret; + +cleanup: + release_mem_region(mem_res->start, mem_size); +out: + return ret; +} + +static int __devexit isp1760_plat_remove(struct platform_device *pdev) +{ + struct resource *mem_res; + resource_size_t mem_size; + + mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + mem_size = resource_size(mem_res); + release_mem_region(mem_res->start, mem_size); + + return 0; +} + +static struct platform_driver isp1760_plat_driver = { + .probe = isp1760_plat_probe, + .remove = isp1760_plat_remove, + .driver = { + .name = "isp1760", + }, +}; + static int __init isp1760_init(void) { - int ret; + int ret, any_ret = -ENODEV; init_kmem_once(); + ret = platform_driver_register(&isp1760_plat_driver); + if (!ret) + any_ret = 0; #ifdef CONFIG_PPC_OF ret = of_register_platform_driver(&isp1760_of_driver); - if (ret) { - deinit_kmem_cache(); - return ret; - } + if (!ret) + any_ret = 0; #endif #ifdef CONFIG_PCI ret = pci_register_driver(&isp1761_pci_driver); - if (ret) - goto unreg_of; + if (!ret) + any_ret = 0; #endif - return ret; -#ifdef CONFIG_PCI -unreg_of: -#endif -#ifdef CONFIG_PPC_OF - of_unregister_platform_driver(&isp1760_of_driver); -#endif - deinit_kmem_cache(); - return ret; + if (any_ret) + deinit_kmem_cache(); + return any_ret; } module_init(isp1760_init); static void __exit isp1760_exit(void) { + platform_driver_unregister(&isp1760_plat_driver); #ifdef CONFIG_PPC_OF of_unregister_platform_driver(&isp1760_of_driver); #endif -- cgit v1.1 From 68b44eaed5def7b6490c23c3e88c6f2ccec57beb Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 13 Feb 2009 17:25:46 -0800 Subject: USB: serial: add symbol serial driver This is for the Symbol 6608 barcode scanner in a fake "HID" mode. Thanks to Dalibor Grgec for working with me to get this to start to work properly. Cc: Dalibor Grgec Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/Kconfig | 9 + drivers/usb/serial/Makefile | 1 + drivers/usb/serial/symbolserial.c | 340 ++++++++++++++++++++++++++++++++++++++ 3 files changed, 350 insertions(+) create mode 100644 drivers/usb/serial/symbolserial.c (limited to 'drivers/usb') diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index b361f05..dbc0781 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -515,6 +515,15 @@ config USB_SERIAL_SIERRAWIRELESS To compile this driver as a module, choose M here: the module will be called sierra. +config USB_SERIAL_SYMBOL + tristate "USB Symbol Barcode driver (serial mode)" + help + Say Y here if you want to use a Symbol USB Barcode device + in serial emulation mode. + + To compile this driver as a module, choose M here: the + module will be called symbolserial. + config USB_SERIAL_TI tristate "USB TI 3410/5052 Serial Driver" help diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile index b75be91..2229397 100644 --- a/drivers/usb/serial/Makefile +++ b/drivers/usb/serial/Makefile @@ -49,6 +49,7 @@ obj-$(CONFIG_USB_SERIAL_SAFE) += safe_serial.o obj-$(CONFIG_USB_SERIAL_SIEMENS_MPI) += siemens_mpi.o obj-$(CONFIG_USB_SERIAL_SIERRAWIRELESS) += sierra.o obj-$(CONFIG_USB_SERIAL_SPCP8X5) += spcp8x5.o +obj-$(CONFIG_USB_SERIAL_SYMBOL) += symbolserial.o obj-$(CONFIG_USB_SERIAL_TI) += ti_usb_3410_5052.o obj-$(CONFIG_USB_SERIAL_VISOR) += visor.o obj-$(CONFIG_USB_SERIAL_WHITEHEAT) += whiteheat.o diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c new file mode 100644 index 0000000..c5990fd --- /dev/null +++ b/drivers/usb/serial/symbolserial.c @@ -0,0 +1,340 @@ +/* + * Symbol USB barcode to serial driver + * + * Copyright (C) 2009 Greg Kroah-Hartman + * Copyright (C) 2009 Novell Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +static int debug; + +static struct usb_device_id id_table[] = { + { USB_DEVICE(0x05e0, 0x0600) }, + { }, +}; +MODULE_DEVICE_TABLE(usb, id_table); + +/* This structure holds all of the individual device information */ +struct symbol_private { + struct usb_device *udev; + struct usb_serial *serial; + struct usb_serial_port *port; + unsigned char *int_buffer; + struct urb *int_urb; + int buffer_size; + u8 bInterval; + u8 int_address; + spinlock_t lock; /* protects the following flags */ + bool throttled; + bool actually_throttled; + bool rts; +}; + +static void symbol_int_callback(struct urb *urb) +{ + struct symbol_private *priv = urb->context; + unsigned char *data = urb->transfer_buffer; + struct usb_serial_port *port = priv->port; + int status = urb->status; + struct tty_struct *tty; + int result; + int available_room = 0; + int data_length; + + dbg("%s - port %d", __func__, port->number); + + switch (status) { + case 0: + /* success */ + break; + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + /* this urb is terminated, clean up */ + dbg("%s - urb shutting down with status: %d", + __func__, status); + return; + default: + dbg("%s - nonzero urb status received: %d", + __func__, status); + goto exit; + } + + usb_serial_debug_data(debug, &port->dev, __func__, urb->actual_length, + data); + + if (urb->actual_length > 1) { + data_length = urb->actual_length - 1; + + /* + * Data from the device comes with a 1 byte header: + * + * data... + * This is real data to be sent to the tty layer + * we pretty much just ignore the size and send everything + * else to the tty layer. + */ + tty = tty_port_tty_get(&port->port); + if (tty) { + available_room = tty_buffer_request_room(tty, + data_length); + if (available_room) { + tty_insert_flip_string(tty, &data[1], + available_room); + tty_flip_buffer_push(tty); + } + tty_kref_put(tty); + } + } else { + dev_dbg(&priv->udev->dev, + "Improper ammount of data received from the device, " + "%d bytes", urb->actual_length); + } + +exit: + spin_lock(&priv->lock); + + /* Continue trying to always read if we should */ + if (!priv->throttled) { + usb_fill_int_urb(priv->int_urb, priv->udev, + usb_rcvintpipe(priv->udev, + priv->int_address), + priv->int_buffer, priv->buffer_size, + symbol_int_callback, priv, priv->bInterval); + result = usb_submit_urb(priv->int_urb, GFP_ATOMIC); + if (result) + dev_err(&port->dev, + "%s - failed resubmitting read urb, error %d\n", + __func__, result); + } else + priv->actually_throttled = true; + spin_unlock(&priv->lock); +} + +static int symbol_open(struct tty_struct *tty, struct usb_serial_port *port, + struct file *filp) +{ + struct symbol_private *priv = usb_get_serial_data(port->serial); + unsigned long flags; + int result = 0; + + dbg("%s - port %d", __func__, port->number); + + spin_lock_irqsave(&priv->lock, flags); + priv->throttled = false; + priv->actually_throttled = false; + priv->port = port; + spin_unlock_irqrestore(&priv->lock, flags); + + /* + * Force low_latency on so that our tty_push actually forces the data + * through, otherwise it is scheduled, and with high data rates (like + * with OHCI) data can get lost. + */ + if (tty) + tty->low_latency = 1; + + /* Start reading from the device */ + usb_fill_int_urb(priv->int_urb, priv->udev, + usb_rcvintpipe(priv->udev, priv->int_address), + priv->int_buffer, priv->buffer_size, + symbol_int_callback, priv, priv->bInterval); + result = usb_submit_urb(priv->int_urb, GFP_KERNEL); + if (result) + dev_err(&port->dev, + "%s - failed resubmitting read urb, error %d\n", + __func__, result); + return result; +} + +static void symbol_close(struct tty_struct *tty, struct usb_serial_port *port, + struct file *filp) +{ + struct symbol_private *priv = usb_get_serial_data(port->serial); + + dbg("%s - port %d", __func__, port->number); + + /* shutdown our urbs */ + usb_kill_urb(priv->int_urb); +} + +static void symbol_throttle(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct symbol_private *priv = usb_get_serial_data(port->serial); + unsigned long flags; + + dbg("%s - port %d", __func__, port->number); + spin_lock_irqsave(&priv->lock, flags); + priv->throttled = true; + spin_unlock_irqrestore(&priv->lock, flags); +} + +static void symbol_unthrottle(struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + struct symbol_private *priv = usb_get_serial_data(port->serial); + unsigned long flags; + int result; + + dbg("%s - port %d", __func__, port->number); + + spin_lock_irqsave(&priv->lock, flags); + priv->throttled = false; + priv->actually_throttled = false; + spin_unlock_irqrestore(&priv->lock, flags); + + priv->int_urb->dev = port->serial->dev; + result = usb_submit_urb(priv->int_urb, GFP_ATOMIC); + if (result) + dev_err(&port->dev, + "%s - failed submitting read urb, error %d\n", + __func__, result); +} + +static int symbol_startup(struct usb_serial *serial) +{ + struct symbol_private *priv; + struct usb_host_interface *intf; + int i; + int retval = -ENOMEM; + bool int_in_found = false; + + /* create our private serial structure */ + priv = kzalloc(sizeof(*priv), GFP_KERNEL); + if (priv == NULL) { + dev_err(&serial->dev->dev, "%s - Out of memory\n", __func__); + return -ENOMEM; + } + spin_lock_init(&priv->lock); + priv->serial = serial; + priv->port = serial->port[0]; + priv->udev = serial->dev; + + /* find our interrupt endpoint */ + intf = serial->interface->altsetting; + for (i = 0; i < intf->desc.bNumEndpoints; ++i) { + struct usb_endpoint_descriptor *endpoint; + + endpoint = &intf->endpoint[i].desc; + if (!usb_endpoint_is_int_in(endpoint)) + continue; + + priv->int_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!priv->int_urb) { + dev_err(&priv->udev->dev, "out of memory\n"); + goto error; + } + + priv->buffer_size = le16_to_cpu(endpoint->wMaxPacketSize) * 2; + priv->int_buffer = kmalloc(priv->buffer_size, GFP_KERNEL); + if (!priv->int_buffer) { + dev_err(&priv->udev->dev, "out of memory\n"); + goto error; + } + + priv->int_address = endpoint->bEndpointAddress; + priv->bInterval = endpoint->bInterval; + + /* set up our int urb */ + usb_fill_int_urb(priv->int_urb, priv->udev, + usb_rcvintpipe(priv->udev, + endpoint->bEndpointAddress), + priv->int_buffer, priv->buffer_size, + symbol_int_callback, priv, priv->bInterval); + + int_in_found = true; + break; + } + + if (!int_in_found) { + dev_err(&priv->udev->dev, + "Error - the proper endpoints were not found!\n"); + goto error; + } + + usb_set_serial_data(serial, priv); + return 0; + +error: + usb_free_urb(priv->int_urb); + kfree(priv->int_buffer); + kfree(priv); + return retval; +} + +static void symbol_shutdown(struct usb_serial *serial) +{ + struct symbol_private *priv = usb_get_serial_data(serial); + + dbg("%s", __func__); + + usb_kill_urb(priv->int_urb); + usb_free_urb(priv->int_urb); + kfree(priv->int_buffer); + kfree(priv); + usb_set_serial_data(serial, NULL); +} + +static struct usb_driver symbol_driver = { + .name = "symbol", + .probe = usb_serial_probe, + .disconnect = usb_serial_disconnect, + .id_table = id_table, + .no_dynamic_id = 1, +}; + +static struct usb_serial_driver symbol_device = { + .driver = { + .owner = THIS_MODULE, + .name = "symbol", + }, + .id_table = id_table, + .usb_driver = &symbol_driver, + .num_ports = 1, + .attach = symbol_startup, + .open = symbol_open, + .close = symbol_close, + .shutdown = symbol_shutdown, + .throttle = symbol_throttle, + .unthrottle = symbol_unthrottle, +}; + +static int __init symbol_init(void) +{ + int retval; + + retval = usb_serial_register(&symbol_device); + if (retval) + return retval; + retval = usb_register(&symbol_driver); + if (retval) + usb_serial_deregister(&symbol_device); + return retval; +} + +static void __exit symbol_exit(void) +{ + usb_deregister(&symbol_driver); + usb_serial_deregister(&symbol_device); +} + +module_init(symbol_init); +module_exit(symbol_exit); +MODULE_LICENSE("GPL"); + +module_param(debug, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Debug enabled or not"); -- cgit v1.1 From 3d940b7d27c5fec35de66449836ab9a01575447c Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 20 Mar 2009 20:26:30 -0700 Subject: USB: symbolserial: log the ioctl commands We need to figure out what userspace programs are expecting from this driver, so log them so we can try to get it right. Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/symbolserial.c | 59 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 59 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c index c5990fd..8b3cbc8 100644 --- a/drivers/usb/serial/symbolserial.c +++ b/drivers/usb/serial/symbolserial.c @@ -205,6 +205,62 @@ static void symbol_unthrottle(struct tty_struct *tty) __func__, result); } +static int symbol_ioctl(struct tty_struct *tty, struct file *file, + unsigned int cmd, unsigned long arg) +{ + struct usb_serial_port *port = tty->driver_data; + struct device *dev = &port->dev; + + /* + * Right now we need to figure out what commands + * most userspace tools want to see for this driver, + * so just log the things. + */ + switch (cmd) { + case TIOCSERGETLSR: + dev_info(dev, "%s: TIOCSERGETLSR\n", __func__); + break; + + case TIOCGSERIAL: + dev_info(dev, "%s: TIOCGSERIAL\n", __func__); + break; + + case TIOCMIWAIT: + dev_info(dev, "%s: TIOCMIWAIT\n", __func__); + break; + + case TIOCGICOUNT: + dev_info(dev, "%s: TIOCGICOUNT\n", __func__); + break; + default: + dev_info(dev, "%s: unknown (%d)\n", __func__, cmd); + } + return -ENOIOCTLCMD; +} + +static int symbol_tiocmget(struct tty_struct *tty, struct file *file) +{ + struct usb_serial_port *port = tty->driver_data; + struct device *dev = &port->dev; + + /* TODO */ + /* probably just need to shadow whatever was sent to us here */ + dev_info(dev, "%s\n", __func__); + return 0; +} + +static int symbol_tiocmset(struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear) +{ + struct usb_serial_port *port = tty->driver_data; + struct device *dev = &port->dev; + + /* TODO */ + /* probably just need to shadow whatever was sent to us here */ + dev_info(dev, "%s\n", __func__); + return 0; +} + static int symbol_startup(struct usb_serial *serial) { struct symbol_private *priv; @@ -311,6 +367,9 @@ static struct usb_serial_driver symbol_device = { .shutdown = symbol_shutdown, .throttle = symbol_throttle, .unthrottle = symbol_unthrottle, + .ioctl = symbol_ioctl, + .tiocmget = symbol_tiocmget, + .tiocmset = symbol_tiocmset, }; static int __init symbol_init(void) -- cgit v1.1 From a78b42824dd7c2b40d72fb01f1b1842f7e845f3a Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 17 Feb 2009 22:39:56 -0800 Subject: USB: serial: add qualcomm wireless modem driver Driver originally written by Qualcomm, but rewritten by me due to the totally different coding style. Cleaned up the probe logic to make a bit more sense, this is one wierd device. They could have prevented all of this by just writing sane firmware for the modem. Cc: Tamm Liu Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/Kconfig | 9 +++ drivers/usb/serial/Makefile | 1 + drivers/usb/serial/qcserial.c | 145 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 155 insertions(+) create mode 100644 drivers/usb/serial/qcserial.c (limited to 'drivers/usb') diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index dbc0781..4afe73e 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -472,6 +472,15 @@ config USB_SERIAL_OTI6858 To compile this driver as a module, choose M here: the module will be called oti6858. +config USB_SERIAL_QUALCOMM + tristate "USB Qualcomm Serial modem" + help + Say Y here if you have a Qualcomm USB modem device. These are + usually wireless cellular modems. + + To compile this driver as a module, choose M here: the + module will be called qcserial. + config USB_SERIAL_SPCP8X5 tristate "USB SPCP8x5 USB To Serial Driver" help diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile index 2229397..94043ba 100644 --- a/drivers/usb/serial/Makefile +++ b/drivers/usb/serial/Makefile @@ -45,6 +45,7 @@ obj-$(CONFIG_USB_SERIAL_OPTICON) += opticon.o obj-$(CONFIG_USB_SERIAL_OPTION) += option.o obj-$(CONFIG_USB_SERIAL_OTI6858) += oti6858.o obj-$(CONFIG_USB_SERIAL_PL2303) += pl2303.o +obj-$(CONFIG_USB_SERIAL_QUALCOMM) += qcserial.o obj-$(CONFIG_USB_SERIAL_SAFE) += safe_serial.o obj-$(CONFIG_USB_SERIAL_SIEMENS_MPI) += siemens_mpi.o obj-$(CONFIG_USB_SERIAL_SIERRAWIRELESS) += sierra.o diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c new file mode 100644 index 0000000..6c6add5 --- /dev/null +++ b/drivers/usb/serial/qcserial.c @@ -0,0 +1,145 @@ +/* + * Qualcomm Serial USB driver + * + * Copyright (c) 2008 QUALCOMM Incorporated. + * Copyright (c) 2009 Greg Kroah-Hartman + * Copyright (c) 2009 Novell Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + */ + +#include +#include +#include +#include + +#define DRIVER_AUTHOR "Qualcomm Inc" +#define DRIVER_DESC "Qualcomm USB Serial driver" + +static int debug; + +static struct usb_device_id id_table[] = { + {USB_DEVICE(0x05c6, 0x9211)}, /* Acer Gobi QDL device */ + {USB_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */ + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, id_table); + +static struct usb_driver qcdriver = { + .name = "qcserial", + .probe = usb_serial_probe, + .disconnect = usb_serial_disconnect, + .id_table = id_table, + .suspend = usb_serial_suspend, + .resume = usb_serial_resume, + .supports_autosuspend = true, +}; + +static int qcprobe(struct usb_serial *serial, const struct usb_device_id *id) +{ + int retval = -ENODEV; + __u8 nintf; + __u8 ifnum; + + dbg("%s", __func__); + + nintf = serial->dev->actconfig->desc.bNumInterfaces; + dbg("Num Interfaces = %d", nintf); + ifnum = serial->interface->cur_altsetting->desc.bInterfaceNumber; + dbg("This Interface = %d", ifnum); + + switch (nintf) { + case 1: + /* QDL mode */ + if (serial->interface->num_altsetting == 2) { + struct usb_host_interface *intf; + + intf = &serial->interface->altsetting[1]; + if (intf->desc.bNumEndpoints == 2) { + if (usb_endpoint_is_bulk_in(&intf->endpoint[0].desc) && + usb_endpoint_is_bulk_out(&intf->endpoint[1].desc)) { + dbg("QDL port found"); + retval = usb_set_interface(serial->dev, ifnum, 1); + if (retval < 0) { + dev_err(&serial->dev->dev, + "Could not set interface, error %d\n", + retval); + retval = -ENODEV; + } + return retval; + } + } + } + break; + + case 4: + /* Composite mode */ + if (ifnum == 2) { + dbg("Modem port found"); + retval = usb_set_interface(serial->dev, ifnum, 0); + if (retval < 0) { + dev_err(&serial->dev->dev, + "Could not set interface, error %d\n", + retval); + retval = -ENODEV; + } + return retval; + } + break; + + default: + dev_err(&serial->dev->dev, + "unknown number of interfaces: %d\n", nintf); + return -ENODEV; + } + + return retval; +} + +static struct usb_serial_driver qcdevice = { + .driver = { + .owner = THIS_MODULE, + .name = "qcserial", + }, + .description = "Qualcomm USB modem", + .id_table = id_table, + .usb_driver = &qcdriver, + .num_ports = 1, + .probe = qcprobe, +}; + +static int __init qcinit(void) +{ + int retval; + + retval = usb_serial_register(&qcdevice); + if (retval) + return retval; + + retval = usb_register(&qcdriver); + if (retval) { + usb_serial_deregister(&qcdevice); + return retval; + } + + return 0; +} + +static void __exit qcexit(void) +{ + usb_deregister(&qcdriver); + usb_serial_deregister(&qcdevice); +} + +module_init(qcinit); +module_exit(qcexit); + +MODULE_AUTHOR(DRIVER_AUTHOR); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL v2"); + +module_param(debug, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Debug enabled or not"); -- cgit v1.1 From 551509d267905705f6d723e51ec706916f06b859 Mon Sep 17 00:00:00 2001 From: Harvey Harrison Date: Wed, 11 Feb 2009 14:11:36 -0800 Subject: USB: replace uses of __constant_{endian} The base versions handle constant folding now. Signed-off-by: Harvey Harrison Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd.c | 2 +- drivers/usb/core/hub.c | 8 ++++---- drivers/usb/gadget/amd5536udc.c | 2 +- drivers/usb/gadget/atmel_usba_udc.c | 20 ++++++++++---------- drivers/usb/gadget/cdc2.c | 8 ++++---- drivers/usb/gadget/dummy_hcd.c | 2 +- drivers/usb/gadget/epautoconf.c | 2 +- drivers/usb/gadget/ether.c | 8 ++++---- drivers/usb/gadget/f_acm.c | 10 +++++----- drivers/usb/gadget/f_ecm.c | 16 ++++++++-------- drivers/usb/gadget/f_loopback.c | 4 ++-- drivers/usb/gadget/f_obex.c | 8 ++++---- drivers/usb/gadget/f_phonet.c | 8 ++++---- drivers/usb/gadget/f_rndis.c | 10 +++++----- drivers/usb/gadget/f_serial.c | 4 ++-- drivers/usb/gadget/f_sourcesink.c | 4 ++-- drivers/usb/gadget/f_subset.c | 14 +++++++------- drivers/usb/gadget/file_storage.c | 22 +++++++++++----------- drivers/usb/gadget/gmidi.c | 16 ++++++++-------- drivers/usb/gadget/goku_udc.c | 8 ++++---- drivers/usb/gadget/inode.c | 4 ++-- drivers/usb/gadget/net2280.c | 16 ++++++++-------- drivers/usb/gadget/printer.c | 18 +++++++++--------- drivers/usb/gadget/serial.c | 12 ++++++------ drivers/usb/gadget/u_serial.c | 2 +- drivers/usb/gadget/zero.c | 8 ++++---- drivers/usb/host/ehci-sched.c | 2 +- drivers/usb/host/ehci.h | 2 +- drivers/usb/host/isp1760-hcd.c | 4 ++-- drivers/usb/host/oxu210hp-hcd.c | 22 +++++++++++----------- drivers/usb/host/oxu210hp.h | 8 ++++---- drivers/usb/host/uhci-hcd.h | 10 +++++----- drivers/usb/host/uhci-q.c | 10 +++++----- drivers/usb/image/mdc800.c | 8 ++++---- drivers/usb/musb/musb_virthub.c | 2 +- 35 files changed, 152 insertions(+), 152 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 3c711db5..0eee32a 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -901,7 +901,7 @@ static int register_root_hub(struct usb_hcd *hcd) mutex_lock(&usb_bus_list_lock); - usb_dev->ep0.desc.wMaxPacketSize = __constant_cpu_to_le16(64); + usb_dev->ep0.desc.wMaxPacketSize = cpu_to_le16(64); retval = usb_get_device_descriptor(usb_dev, USB_DT_DEVICE_SIZE); if (retval != sizeof usb_dev->descriptor) { mutex_unlock(&usb_bus_list_lock); diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index cd50d86..7e33d63 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2471,20 +2471,20 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, */ switch (udev->speed) { case USB_SPEED_VARIABLE: /* fixed at 512 */ - udev->ep0.desc.wMaxPacketSize = __constant_cpu_to_le16(512); + udev->ep0.desc.wMaxPacketSize = cpu_to_le16(512); break; case USB_SPEED_HIGH: /* fixed at 64 */ - udev->ep0.desc.wMaxPacketSize = __constant_cpu_to_le16(64); + udev->ep0.desc.wMaxPacketSize = cpu_to_le16(64); break; case USB_SPEED_FULL: /* 8, 16, 32, or 64 */ /* to determine the ep0 maxpacket size, try to read * the device descriptor to get bMaxPacketSize0 and * then correct our initial guess. */ - udev->ep0.desc.wMaxPacketSize = __constant_cpu_to_le16(64); + udev->ep0.desc.wMaxPacketSize = cpu_to_le16(64); break; case USB_SPEED_LOW: /* fixed at 8 */ - udev->ep0.desc.wMaxPacketSize = __constant_cpu_to_le16(8); + udev->ep0.desc.wMaxPacketSize = cpu_to_le16(8); break; default: goto fail; diff --git a/drivers/usb/gadget/amd5536udc.c b/drivers/usb/gadget/amd5536udc.c index abf8192..826f3ad 100644 --- a/drivers/usb/gadget/amd5536udc.c +++ b/drivers/usb/gadget/amd5536udc.c @@ -551,7 +551,7 @@ udc_alloc_request(struct usb_ep *usbep, gfp_t gfp) dma_desc->status = AMD_ADDBITS(dma_desc->status, UDC_DMA_STP_STS_BS_HOST_BUSY, UDC_DMA_STP_STS_BS); - dma_desc->bufptr = __constant_cpu_to_le32(DMA_DONT_USE); + dma_desc->bufptr = cpu_to_le32(DMA_DONT_USE); req->td_data = dma_desc; req->td_data_last = NULL; req->chain_len = 1; diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c index 65b03e3..c22fab1 100644 --- a/drivers/usb/gadget/atmel_usba_udc.c +++ b/drivers/usb/gadget/atmel_usba_udc.c @@ -1017,7 +1017,7 @@ static struct usb_endpoint_descriptor usba_ep0_desc = { .bDescriptorType = USB_DT_ENDPOINT, .bEndpointAddress = 0, .bmAttributes = USB_ENDPOINT_XFER_CONTROL, - .wMaxPacketSize = __constant_cpu_to_le16(64), + .wMaxPacketSize = cpu_to_le16(64), /* FIXME: I have no idea what to put here */ .bInterval = 1, }; @@ -1207,21 +1207,21 @@ static int do_test_mode(struct usba_udc *udc) /* Avoid overly long expressions */ static inline bool feature_is_dev_remote_wakeup(struct usb_ctrlrequest *crq) { - if (crq->wValue == __constant_cpu_to_le16(USB_DEVICE_REMOTE_WAKEUP)) + if (crq->wValue == cpu_to_le16(USB_DEVICE_REMOTE_WAKEUP)) return true; return false; } static inline bool feature_is_dev_test_mode(struct usb_ctrlrequest *crq) { - if (crq->wValue == __constant_cpu_to_le16(USB_DEVICE_TEST_MODE)) + if (crq->wValue == cpu_to_le16(USB_DEVICE_TEST_MODE)) return true; return false; } static inline bool feature_is_ep_halt(struct usb_ctrlrequest *crq) { - if (crq->wValue == __constant_cpu_to_le16(USB_ENDPOINT_HALT)) + if (crq->wValue == cpu_to_le16(USB_ENDPOINT_HALT)) return true; return false; } @@ -1239,7 +1239,7 @@ static int handle_ep0_setup(struct usba_udc *udc, struct usba_ep *ep, status = cpu_to_le16(udc->devstatus); } else if (crq->bRequestType == (USB_DIR_IN | USB_RECIP_INTERFACE)) { - status = __constant_cpu_to_le16(0); + status = cpu_to_le16(0); } else if (crq->bRequestType == (USB_DIR_IN | USB_RECIP_ENDPOINT)) { struct usba_ep *target; @@ -1250,12 +1250,12 @@ static int handle_ep0_setup(struct usba_udc *udc, struct usba_ep *ep, status = 0; if (is_stalled(udc, target)) - status |= __constant_cpu_to_le16(1); + status |= cpu_to_le16(1); } else goto delegate; /* Write directly to the FIFO. No queueing is done. */ - if (crq->wLength != __constant_cpu_to_le16(sizeof(status))) + if (crq->wLength != cpu_to_le16(sizeof(status))) goto stall; ep->state = DATA_STAGE_IN; __raw_writew(status, ep->fifo); @@ -1274,7 +1274,7 @@ static int handle_ep0_setup(struct usba_udc *udc, struct usba_ep *ep, } else if (crq->bRequestType == USB_RECIP_ENDPOINT) { struct usba_ep *target; - if (crq->wLength != __constant_cpu_to_le16(0) + if (crq->wLength != cpu_to_le16(0) || !feature_is_ep_halt(crq)) goto stall; target = get_ep_by_addr(udc, le16_to_cpu(crq->wIndex)); @@ -1308,7 +1308,7 @@ static int handle_ep0_setup(struct usba_udc *udc, struct usba_ep *ep, } else if (crq->bRequestType == USB_RECIP_ENDPOINT) { struct usba_ep *target; - if (crq->wLength != __constant_cpu_to_le16(0) + if (crq->wLength != cpu_to_le16(0) || !feature_is_ep_halt(crq)) goto stall; @@ -1514,7 +1514,7 @@ restart: */ ep->state = DATA_STAGE_IN; } else { - if (crq.crq.wLength != __constant_cpu_to_le16(0)) + if (crq.crq.wLength != cpu_to_le16(0)) ep->state = DATA_STAGE_OUT; else ep->state = STATUS_STAGE_IN; diff --git a/drivers/usb/gadget/cdc2.c b/drivers/usb/gadget/cdc2.c index 5495b17..928137d 100644 --- a/drivers/usb/gadget/cdc2.c +++ b/drivers/usb/gadget/cdc2.c @@ -66,7 +66,7 @@ static struct usb_device_descriptor device_desc = { .bLength = sizeof device_desc, .bDescriptorType = USB_DT_DEVICE, - .bcdUSB = __constant_cpu_to_le16(0x0200), + .bcdUSB = cpu_to_le16(0x0200), .bDeviceClass = USB_CLASS_COMM, .bDeviceSubClass = 0, @@ -74,8 +74,8 @@ static struct usb_device_descriptor device_desc = { /* .bMaxPacketSize0 = f(hardware) */ /* Vendor and product id can be overridden by module parameters. */ - .idVendor = __constant_cpu_to_le16(CDC_VENDOR_NUM), - .idProduct = __constant_cpu_to_le16(CDC_PRODUCT_NUM), + .idVendor = cpu_to_le16(CDC_VENDOR_NUM), + .idProduct = cpu_to_le16(CDC_PRODUCT_NUM), /* .bcdDevice = f(hardware) */ /* .iManufacturer = DYNAMIC */ /* .iProduct = DYNAMIC */ @@ -193,7 +193,7 @@ static int __init cdc_bind(struct usb_composite_dev *cdev) gadget->name, cdc_config_driver.label); device_desc.bcdDevice = - __constant_cpu_to_le16(0x0300 | 0x0099); + cpu_to_le16(0x0300 | 0x0099); } diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index 9064696..3b42888 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -1626,7 +1626,7 @@ static int dummy_hub_control ( hub_descriptor ((struct usb_hub_descriptor *) buf); break; case GetHubStatus: - *(__le32 *) buf = __constant_cpu_to_le32 (0); + *(__le32 *) buf = cpu_to_le32 (0); break; case GetPortStatus: if (wIndex != 1) diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c index a36b117..cd0914e 100644 --- a/drivers/usb/gadget/epautoconf.c +++ b/drivers/usb/gadget/epautoconf.c @@ -148,7 +148,7 @@ ep_matches ( return 0; /* BOTH: "high bandwidth" works only at high speed */ - if ((desc->wMaxPacketSize & __constant_cpu_to_le16(3<<11))) { + if ((desc->wMaxPacketSize & cpu_to_le16(3<<11))) { if (!gadget->is_dualspeed) return 0; /* configure your hardware with enough buffering!! */ diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c index 37252d0..d006dc6 100644 --- a/drivers/usb/gadget/ether.c +++ b/drivers/usb/gadget/ether.c @@ -156,7 +156,7 @@ static struct usb_device_descriptor device_desc = { .bLength = sizeof device_desc, .bDescriptorType = USB_DT_DEVICE, - .bcdUSB = __constant_cpu_to_le16 (0x0200), + .bcdUSB = cpu_to_le16 (0x0200), .bDeviceClass = USB_CLASS_COMM, .bDeviceSubClass = 0, @@ -167,8 +167,8 @@ static struct usb_device_descriptor device_desc = { * we support. (As does bNumConfigurations.) These values can * also be overridden by module parameters. */ - .idVendor = __constant_cpu_to_le16 (CDC_VENDOR_NUM), - .idProduct = __constant_cpu_to_le16 (CDC_PRODUCT_NUM), + .idVendor = cpu_to_le16 (CDC_VENDOR_NUM), + .idProduct = cpu_to_le16 (CDC_PRODUCT_NUM), /* .bcdDevice = f(hardware) */ /* .iManufacturer = DYNAMIC */ /* .iProduct = DYNAMIC */ @@ -318,7 +318,7 @@ static int __init eth_bind(struct usb_composite_dev *cdev) gadget->name, eth_config_driver.label); device_desc.bcdDevice = - __constant_cpu_to_le16(0x0300 | 0x0099); + cpu_to_le16(0x0300 | 0x0099); } diff --git a/drivers/usb/gadget/f_acm.c b/drivers/usb/gadget/f_acm.c index c1d34df..7953948 100644 --- a/drivers/usb/gadget/f_acm.c +++ b/drivers/usb/gadget/f_acm.c @@ -125,7 +125,7 @@ static struct usb_cdc_header_desc acm_header_desc __initdata = { .bLength = sizeof(acm_header_desc), .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubType = USB_CDC_HEADER_TYPE, - .bcdCDC = __constant_cpu_to_le16(0x0110), + .bcdCDC = cpu_to_le16(0x0110), }; static struct usb_cdc_call_mgmt_descriptor @@ -159,7 +159,7 @@ static struct usb_endpoint_descriptor acm_fs_notify_desc __initdata = { .bDescriptorType = USB_DT_ENDPOINT, .bEndpointAddress = USB_DIR_IN, .bmAttributes = USB_ENDPOINT_XFER_INT, - .wMaxPacketSize = __constant_cpu_to_le16(GS_NOTIFY_MAXPACKET), + .wMaxPacketSize = cpu_to_le16(GS_NOTIFY_MAXPACKET), .bInterval = 1 << GS_LOG2_NOTIFY_INTERVAL, }; @@ -197,7 +197,7 @@ static struct usb_endpoint_descriptor acm_hs_notify_desc __initdata = { .bDescriptorType = USB_DT_ENDPOINT, .bEndpointAddress = USB_DIR_IN, .bmAttributes = USB_ENDPOINT_XFER_INT, - .wMaxPacketSize = __constant_cpu_to_le16(GS_NOTIFY_MAXPACKET), + .wMaxPacketSize = cpu_to_le16(GS_NOTIFY_MAXPACKET), .bInterval = GS_LOG2_NOTIFY_INTERVAL+4, }; @@ -205,14 +205,14 @@ static struct usb_endpoint_descriptor acm_hs_in_desc __initdata = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bmAttributes = USB_ENDPOINT_XFER_BULK, - .wMaxPacketSize = __constant_cpu_to_le16(512), + .wMaxPacketSize = cpu_to_le16(512), }; static struct usb_endpoint_descriptor acm_hs_out_desc __initdata = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bmAttributes = USB_ENDPOINT_XFER_BULK, - .wMaxPacketSize = __constant_cpu_to_le16(512), + .wMaxPacketSize = cpu_to_le16(512), }; static struct usb_descriptor_header *acm_hs_function[] __initdata = { diff --git a/drivers/usb/gadget/f_ecm.c b/drivers/usb/gadget/f_ecm.c index 4ae5799..ecf5bdd 100644 --- a/drivers/usb/gadget/f_ecm.c +++ b/drivers/usb/gadget/f_ecm.c @@ -130,7 +130,7 @@ static struct usb_cdc_header_desc ecm_header_desc __initdata = { .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubType = USB_CDC_HEADER_TYPE, - .bcdCDC = __constant_cpu_to_le16(0x0110), + .bcdCDC = cpu_to_le16(0x0110), }; static struct usb_cdc_union_desc ecm_union_desc __initdata = { @@ -148,9 +148,9 @@ static struct usb_cdc_ether_desc ecm_desc __initdata = { /* this descriptor actually adds value, surprise! */ /* .iMACAddress = DYNAMIC */ - .bmEthernetStatistics = __constant_cpu_to_le32(0), /* no statistics */ - .wMaxSegmentSize = __constant_cpu_to_le16(ETH_FRAME_LEN), - .wNumberMCFilters = __constant_cpu_to_le16(0), + .bmEthernetStatistics = cpu_to_le32(0), /* no statistics */ + .wMaxSegmentSize = cpu_to_le16(ETH_FRAME_LEN), + .wNumberMCFilters = cpu_to_le16(0), .bNumberPowerFilters = 0, }; @@ -192,7 +192,7 @@ static struct usb_endpoint_descriptor fs_ecm_notify_desc __initdata = { .bEndpointAddress = USB_DIR_IN, .bmAttributes = USB_ENDPOINT_XFER_INT, - .wMaxPacketSize = __constant_cpu_to_le16(ECM_STATUS_BYTECOUNT), + .wMaxPacketSize = cpu_to_le16(ECM_STATUS_BYTECOUNT), .bInterval = 1 << LOG2_STATUS_INTERVAL_MSEC, }; @@ -236,7 +236,7 @@ static struct usb_endpoint_descriptor hs_ecm_notify_desc __initdata = { .bEndpointAddress = USB_DIR_IN, .bmAttributes = USB_ENDPOINT_XFER_INT, - .wMaxPacketSize = __constant_cpu_to_le16(ECM_STATUS_BYTECOUNT), + .wMaxPacketSize = cpu_to_le16(ECM_STATUS_BYTECOUNT), .bInterval = LOG2_STATUS_INTERVAL_MSEC + 4, }; static struct usb_endpoint_descriptor hs_ecm_in_desc __initdata = { @@ -245,7 +245,7 @@ static struct usb_endpoint_descriptor hs_ecm_in_desc __initdata = { .bEndpointAddress = USB_DIR_IN, .bmAttributes = USB_ENDPOINT_XFER_BULK, - .wMaxPacketSize = __constant_cpu_to_le16(512), + .wMaxPacketSize = cpu_to_le16(512), }; static struct usb_endpoint_descriptor hs_ecm_out_desc __initdata = { @@ -254,7 +254,7 @@ static struct usb_endpoint_descriptor hs_ecm_out_desc __initdata = { .bEndpointAddress = USB_DIR_OUT, .bmAttributes = USB_ENDPOINT_XFER_BULK, - .wMaxPacketSize = __constant_cpu_to_le16(512), + .wMaxPacketSize = cpu_to_le16(512), }; static struct usb_descriptor_header *ecm_hs_function[] __initdata = { diff --git a/drivers/usb/gadget/f_loopback.c b/drivers/usb/gadget/f_loopback.c index 8affe1d..83301bd 100644 --- a/drivers/usb/gadget/f_loopback.c +++ b/drivers/usb/gadget/f_loopback.c @@ -100,7 +100,7 @@ static struct usb_endpoint_descriptor hs_loop_source_desc = { .bDescriptorType = USB_DT_ENDPOINT, .bmAttributes = USB_ENDPOINT_XFER_BULK, - .wMaxPacketSize = __constant_cpu_to_le16(512), + .wMaxPacketSize = cpu_to_le16(512), }; static struct usb_endpoint_descriptor hs_loop_sink_desc = { @@ -108,7 +108,7 @@ static struct usb_endpoint_descriptor hs_loop_sink_desc = { .bDescriptorType = USB_DT_ENDPOINT, .bmAttributes = USB_ENDPOINT_XFER_BULK, - .wMaxPacketSize = __constant_cpu_to_le16(512), + .wMaxPacketSize = cpu_to_le16(512), }; static struct usb_descriptor_header *hs_loopback_descs[] = { diff --git a/drivers/usb/gadget/f_obex.c b/drivers/usb/gadget/f_obex.c index 38aa896..46d6266 100644 --- a/drivers/usb/gadget/f_obex.c +++ b/drivers/usb/gadget/f_obex.c @@ -123,7 +123,7 @@ static struct usb_cdc_header_desc obex_cdc_header_desc __initdata = { .bLength = sizeof(obex_cdc_header_desc), .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubType = USB_CDC_HEADER_TYPE, - .bcdCDC = __constant_cpu_to_le16(0x0120), + .bcdCDC = cpu_to_le16(0x0120), }; static struct usb_cdc_union_desc obex_cdc_union_desc __initdata = { @@ -138,7 +138,7 @@ static struct usb_cdc_obex_desc obex_desc __initdata = { .bLength = sizeof(obex_desc), .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubType = USB_CDC_OBEX_TYPE, - .bcdVersion = __constant_cpu_to_le16(0x0100), + .bcdVersion = cpu_to_le16(0x0100), }; /* High-Speed Support */ @@ -149,7 +149,7 @@ static struct usb_endpoint_descriptor obex_hs_ep_out_desc __initdata = { .bEndpointAddress = USB_DIR_OUT, .bmAttributes = USB_ENDPOINT_XFER_BULK, - .wMaxPacketSize = __constant_cpu_to_le16(512), + .wMaxPacketSize = cpu_to_le16(512), }; static struct usb_endpoint_descriptor obex_hs_ep_in_desc __initdata = { @@ -158,7 +158,7 @@ static struct usb_endpoint_descriptor obex_hs_ep_in_desc __initdata = { .bEndpointAddress = USB_DIR_IN, .bmAttributes = USB_ENDPOINT_XFER_BULK, - .wMaxPacketSize = __constant_cpu_to_le16(512), + .wMaxPacketSize = cpu_to_le16(512), }; static struct usb_descriptor_header *hs_function[] __initdata = { diff --git a/drivers/usb/gadget/f_phonet.c b/drivers/usb/gadget/f_phonet.c index c0916c7..c1abeb8 100644 --- a/drivers/usb/gadget/f_phonet.c +++ b/drivers/usb/gadget/f_phonet.c @@ -79,7 +79,7 @@ pn_header_desc = { .bLength = sizeof pn_header_desc, .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubType = USB_CDC_HEADER_TYPE, - .bcdCDC = __constant_cpu_to_le16(0x0110), + .bcdCDC = cpu_to_le16(0x0110), }; static const struct usb_cdc_header_desc @@ -87,7 +87,7 @@ pn_phonet_desc = { .bLength = sizeof pn_phonet_desc, .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubType = USB_CDC_PHONET_TYPE, - .bcdCDC = __constant_cpu_to_le16(0x1505), /* ??? */ + .bcdCDC = cpu_to_le16(0x1505), /* ??? */ }; static struct usb_cdc_union_desc @@ -138,7 +138,7 @@ pn_hs_sink_desc = { .bEndpointAddress = USB_DIR_OUT, .bmAttributes = USB_ENDPOINT_XFER_BULK, - .wMaxPacketSize = __constant_cpu_to_le16(512), + .wMaxPacketSize = cpu_to_le16(512), }; static struct usb_endpoint_descriptor @@ -157,7 +157,7 @@ pn_hs_source_desc = { .bEndpointAddress = USB_DIR_IN, .bmAttributes = USB_ENDPOINT_XFER_BULK, - .wMaxPacketSize = __constant_cpu_to_le16(512), + .wMaxPacketSize = cpu_to_le16(512), }; static struct usb_descriptor_header *fs_pn_function[] = { diff --git a/drivers/usb/gadget/f_rndis.c b/drivers/usb/gadget/f_rndis.c index fd7b356..3279a47 100644 --- a/drivers/usb/gadget/f_rndis.c +++ b/drivers/usb/gadget/f_rndis.c @@ -137,7 +137,7 @@ static struct usb_cdc_header_desc header_desc __initdata = { .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubType = USB_CDC_HEADER_TYPE, - .bcdCDC = __constant_cpu_to_le16(0x0110), + .bcdCDC = cpu_to_le16(0x0110), }; static struct usb_cdc_call_mgmt_descriptor call_mgmt_descriptor __initdata = { @@ -187,7 +187,7 @@ static struct usb_endpoint_descriptor fs_notify_desc __initdata = { .bEndpointAddress = USB_DIR_IN, .bmAttributes = USB_ENDPOINT_XFER_INT, - .wMaxPacketSize = __constant_cpu_to_le16(STATUS_BYTECOUNT), + .wMaxPacketSize = cpu_to_le16(STATUS_BYTECOUNT), .bInterval = 1 << LOG2_STATUS_INTERVAL_MSEC, }; @@ -230,7 +230,7 @@ static struct usb_endpoint_descriptor hs_notify_desc __initdata = { .bEndpointAddress = USB_DIR_IN, .bmAttributes = USB_ENDPOINT_XFER_INT, - .wMaxPacketSize = __constant_cpu_to_le16(STATUS_BYTECOUNT), + .wMaxPacketSize = cpu_to_le16(STATUS_BYTECOUNT), .bInterval = LOG2_STATUS_INTERVAL_MSEC + 4, }; static struct usb_endpoint_descriptor hs_in_desc __initdata = { @@ -239,7 +239,7 @@ static struct usb_endpoint_descriptor hs_in_desc __initdata = { .bEndpointAddress = USB_DIR_IN, .bmAttributes = USB_ENDPOINT_XFER_BULK, - .wMaxPacketSize = __constant_cpu_to_le16(512), + .wMaxPacketSize = cpu_to_le16(512), }; static struct usb_endpoint_descriptor hs_out_desc __initdata = { @@ -248,7 +248,7 @@ static struct usb_endpoint_descriptor hs_out_desc __initdata = { .bEndpointAddress = USB_DIR_OUT, .bmAttributes = USB_ENDPOINT_XFER_BULK, - .wMaxPacketSize = __constant_cpu_to_le16(512), + .wMaxPacketSize = cpu_to_le16(512), }; static struct usb_descriptor_header *eth_hs_function[] __initdata = { diff --git a/drivers/usb/gadget/f_serial.c b/drivers/usb/gadget/f_serial.c index fe5674db..db0aa93 100644 --- a/drivers/usb/gadget/f_serial.c +++ b/drivers/usb/gadget/f_serial.c @@ -89,14 +89,14 @@ static struct usb_endpoint_descriptor gser_hs_in_desc __initdata = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bmAttributes = USB_ENDPOINT_XFER_BULK, - .wMaxPacketSize = __constant_cpu_to_le16(512), + .wMaxPacketSize = cpu_to_le16(512), }; static struct usb_endpoint_descriptor gser_hs_out_desc __initdata = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bmAttributes = USB_ENDPOINT_XFER_BULK, - .wMaxPacketSize = __constant_cpu_to_le16(512), + .wMaxPacketSize = cpu_to_le16(512), }; static struct usb_descriptor_header *gser_hs_function[] __initdata = { diff --git a/drivers/usb/gadget/f_sourcesink.c b/drivers/usb/gadget/f_sourcesink.c index dc84d26..6aca5c8 100644 --- a/drivers/usb/gadget/f_sourcesink.c +++ b/drivers/usb/gadget/f_sourcesink.c @@ -118,7 +118,7 @@ static struct usb_endpoint_descriptor hs_source_desc = { .bDescriptorType = USB_DT_ENDPOINT, .bmAttributes = USB_ENDPOINT_XFER_BULK, - .wMaxPacketSize = __constant_cpu_to_le16(512), + .wMaxPacketSize = cpu_to_le16(512), }; static struct usb_endpoint_descriptor hs_sink_desc = { @@ -126,7 +126,7 @@ static struct usb_endpoint_descriptor hs_sink_desc = { .bDescriptorType = USB_DT_ENDPOINT, .bmAttributes = USB_ENDPOINT_XFER_BULK, - .wMaxPacketSize = __constant_cpu_to_le16(512), + .wMaxPacketSize = cpu_to_le16(512), }; static struct usb_descriptor_header *hs_source_sink_descs[] = { diff --git a/drivers/usb/gadget/f_subset.c b/drivers/usb/gadget/f_subset.c index fe18328..a9c98fd 100644 --- a/drivers/usb/gadget/f_subset.c +++ b/drivers/usb/gadget/f_subset.c @@ -108,7 +108,7 @@ static struct usb_cdc_header_desc mdlm_header_desc __initdata = { .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubType = USB_CDC_HEADER_TYPE, - .bcdCDC = __constant_cpu_to_le16(0x0110), + .bcdCDC = cpu_to_le16(0x0110), }; static struct usb_cdc_mdlm_desc mdlm_desc __initdata = { @@ -116,7 +116,7 @@ static struct usb_cdc_mdlm_desc mdlm_desc __initdata = { .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubType = USB_CDC_MDLM_TYPE, - .bcdVersion = __constant_cpu_to_le16(0x0100), + .bcdVersion = cpu_to_le16(0x0100), .bGUID = { 0x5d, 0x34, 0xcf, 0x66, 0x11, 0x18, 0x11, 0xd6, 0xa2, 0x1a, 0x00, 0x01, 0x02, 0xca, 0x9a, 0x7f, @@ -144,9 +144,9 @@ static struct usb_cdc_ether_desc ether_desc __initdata = { /* this descriptor actually adds value, surprise! */ /* .iMACAddress = DYNAMIC */ - .bmEthernetStatistics = __constant_cpu_to_le32(0), /* no statistics */ - .wMaxSegmentSize = __constant_cpu_to_le16(ETH_FRAME_LEN), - .wNumberMCFilters = __constant_cpu_to_le16(0), + .bmEthernetStatistics = cpu_to_le32(0), /* no statistics */ + .wMaxSegmentSize = cpu_to_le16(ETH_FRAME_LEN), + .wNumberMCFilters = cpu_to_le16(0), .bNumberPowerFilters = 0, }; @@ -186,7 +186,7 @@ static struct usb_endpoint_descriptor hs_subset_in_desc __initdata = { .bDescriptorType = USB_DT_ENDPOINT, .bmAttributes = USB_ENDPOINT_XFER_BULK, - .wMaxPacketSize = __constant_cpu_to_le16(512), + .wMaxPacketSize = cpu_to_le16(512), }; static struct usb_endpoint_descriptor hs_subset_out_desc __initdata = { @@ -194,7 +194,7 @@ static struct usb_endpoint_descriptor hs_subset_out_desc __initdata = { .bDescriptorType = USB_DT_ENDPOINT, .bmAttributes = USB_ENDPOINT_XFER_BULK, - .wMaxPacketSize = __constant_cpu_to_le16(512), + .wMaxPacketSize = cpu_to_le16(512), }; static struct usb_descriptor_header *hs_eth_function[] __initdata = { diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c index 1ab9dac..d3c2464 100644 --- a/drivers/usb/gadget/file_storage.c +++ b/drivers/usb/gadget/file_storage.c @@ -847,13 +847,13 @@ device_desc = { .bLength = sizeof device_desc, .bDescriptorType = USB_DT_DEVICE, - .bcdUSB = __constant_cpu_to_le16(0x0200), + .bcdUSB = cpu_to_le16(0x0200), .bDeviceClass = USB_CLASS_PER_INTERFACE, /* The next three values can be overridden by module parameters */ - .idVendor = __constant_cpu_to_le16(DRIVER_VENDOR_ID), - .idProduct = __constant_cpu_to_le16(DRIVER_PRODUCT_ID), - .bcdDevice = __constant_cpu_to_le16(0xffff), + .idVendor = cpu_to_le16(DRIVER_VENDOR_ID), + .idProduct = cpu_to_le16(DRIVER_PRODUCT_ID), + .bcdDevice = cpu_to_le16(0xffff), .iManufacturer = STRING_MANUFACTURER, .iProduct = STRING_PRODUCT, @@ -926,7 +926,7 @@ fs_intr_in_desc = { .bEndpointAddress = USB_DIR_IN, .bmAttributes = USB_ENDPOINT_XFER_INT, - .wMaxPacketSize = __constant_cpu_to_le16(2), + .wMaxPacketSize = cpu_to_le16(2), .bInterval = 32, // frames -> 32 ms }; @@ -954,7 +954,7 @@ dev_qualifier = { .bLength = sizeof dev_qualifier, .bDescriptorType = USB_DT_DEVICE_QUALIFIER, - .bcdUSB = __constant_cpu_to_le16(0x0200), + .bcdUSB = cpu_to_le16(0x0200), .bDeviceClass = USB_CLASS_PER_INTERFACE, .bNumConfigurations = 1, @@ -967,7 +967,7 @@ hs_bulk_in_desc = { /* bEndpointAddress copied from fs_bulk_in_desc during fsg_bind() */ .bmAttributes = USB_ENDPOINT_XFER_BULK, - .wMaxPacketSize = __constant_cpu_to_le16(512), + .wMaxPacketSize = cpu_to_le16(512), }; static struct usb_endpoint_descriptor @@ -977,7 +977,7 @@ hs_bulk_out_desc = { /* bEndpointAddress copied from fs_bulk_out_desc during fsg_bind() */ .bmAttributes = USB_ENDPOINT_XFER_BULK, - .wMaxPacketSize = __constant_cpu_to_le16(512), + .wMaxPacketSize = cpu_to_le16(512), .bInterval = 1, // NAK every 1 uframe }; @@ -988,7 +988,7 @@ hs_intr_in_desc = { /* bEndpointAddress copied from fs_intr_in_desc during fsg_bind() */ .bmAttributes = USB_ENDPOINT_XFER_INT, - .wMaxPacketSize = __constant_cpu_to_le16(2), + .wMaxPacketSize = cpu_to_le16(2), .bInterval = 9, // 2**(9-1) = 256 uframes -> 32 ms }; @@ -2646,7 +2646,7 @@ static int send_status(struct fsg_dev *fsg) struct bulk_cs_wrap *csw = bh->buf; /* Store and send the Bulk-only CSW */ - csw->Signature = __constant_cpu_to_le32(USB_BULK_CS_SIG); + csw->Signature = cpu_to_le32(USB_BULK_CS_SIG); csw->Tag = fsg->tag; csw->Residue = cpu_to_le32(fsg->residue); csw->Status = status; @@ -3089,7 +3089,7 @@ static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh) /* Is the CBW valid? */ if (req->actual != USB_BULK_CB_WRAP_LEN || - cbw->Signature != __constant_cpu_to_le32( + cbw->Signature != cpu_to_le32( USB_BULK_CB_SIG)) { DBG(fsg, "invalid CBW: len %u sig 0x%x\n", req->actual, diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c index 60d3f9e..bb738bc 100644 --- a/drivers/usb/gadget/gmidi.c +++ b/drivers/usb/gadget/gmidi.c @@ -199,10 +199,10 @@ DECLARE_USB_MS_ENDPOINT_DESCRIPTOR(1); static struct usb_device_descriptor device_desc = { .bLength = USB_DT_DEVICE_SIZE, .bDescriptorType = USB_DT_DEVICE, - .bcdUSB = __constant_cpu_to_le16(0x0200), + .bcdUSB = cpu_to_le16(0x0200), .bDeviceClass = USB_CLASS_PER_INTERFACE, - .idVendor = __constant_cpu_to_le16(DRIVER_VENDOR_NUM), - .idProduct = __constant_cpu_to_le16(DRIVER_PRODUCT_NUM), + .idVendor = cpu_to_le16(DRIVER_VENDOR_NUM), + .idProduct = cpu_to_le16(DRIVER_PRODUCT_NUM), .iManufacturer = STRING_MANUFACTURER, .iProduct = STRING_PRODUCT, .bNumConfigurations = 1, @@ -241,8 +241,8 @@ static const struct usb_ac_header_descriptor_1 ac_header_desc = { .bLength = USB_DT_AC_HEADER_SIZE(1), .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubtype = USB_MS_HEADER, - .bcdADC = __constant_cpu_to_le16(0x0100), - .wTotalLength = __constant_cpu_to_le16(USB_DT_AC_HEADER_SIZE(1)), + .bcdADC = cpu_to_le16(0x0100), + .wTotalLength = cpu_to_le16(USB_DT_AC_HEADER_SIZE(1)), .bInCollection = 1, .baInterfaceNr = { [0] = GMIDI_MS_INTERFACE, @@ -265,8 +265,8 @@ static const struct usb_ms_header_descriptor ms_header_desc = { .bLength = USB_DT_MS_HEADER_SIZE, .bDescriptorType = USB_DT_CS_INTERFACE, .bDescriptorSubtype = USB_MS_HEADER, - .bcdMSC = __constant_cpu_to_le16(0x0100), - .wTotalLength = __constant_cpu_to_le16(USB_DT_MS_HEADER_SIZE + .bcdMSC = cpu_to_le16(0x0100), + .wTotalLength = cpu_to_le16(USB_DT_MS_HEADER_SIZE + 2*USB_DT_MIDI_IN_SIZE + 2*USB_DT_MIDI_OUT_SIZE(1)), }; @@ -1227,7 +1227,7 @@ autoconf_fail: */ pr_warning("%s: controller '%s' not recognized\n", shortname, gadget->name); - device_desc.bcdDevice = __constant_cpu_to_le16(0x9999); + device_desc.bcdDevice = cpu_to_le16(0x9999); } diff --git a/drivers/usb/gadget/goku_udc.c b/drivers/usb/gadget/goku_udc.c index 63419c4..de010c9 100644 --- a/drivers/usb/gadget/goku_udc.c +++ b/drivers/usb/gadget/goku_udc.c @@ -1472,7 +1472,7 @@ static void ep0_setup(struct goku_udc *dev) /* active endpoint */ if (tmp > 3 || (!dev->ep[tmp].desc && tmp != 0)) goto stall; - if (ctrl.wIndex & __constant_cpu_to_le16( + if (ctrl.wIndex & cpu_to_le16( USB_DIR_IN)) { if (!dev->ep[tmp].is_in) goto stall; @@ -1480,7 +1480,7 @@ static void ep0_setup(struct goku_udc *dev) if (dev->ep[tmp].is_in) goto stall; } - if (ctrl.wValue != __constant_cpu_to_le16( + if (ctrl.wValue != cpu_to_le16( USB_ENDPOINT_HALT)) goto stall; if (tmp) @@ -1493,7 +1493,7 @@ succeed: return; case USB_RECIP_DEVICE: /* device remote wakeup: always clear */ - if (ctrl.wValue != __constant_cpu_to_le16(1)) + if (ctrl.wValue != cpu_to_le16(1)) goto stall; VDBG(dev, "clear dev remote wakeup\n"); goto succeed; @@ -1519,7 +1519,7 @@ succeed: dev->req_config = (ctrl.bRequest == USB_REQ_SET_CONFIGURATION && ctrl.bRequestType == USB_RECIP_DEVICE); if (unlikely(dev->req_config)) - dev->configured = (ctrl.wValue != __constant_cpu_to_le16(0)); + dev->configured = (ctrl.wValue != cpu_to_le16(0)); /* delegate everything to the gadget driver. * it may respond after this irq handler returns. diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c index 317b48f..d20937f 100644 --- a/drivers/usb/gadget/inode.c +++ b/drivers/usb/gadget/inode.c @@ -1334,7 +1334,7 @@ static void make_qualifier (struct dev_data *dev) qual.bLength = sizeof qual; qual.bDescriptorType = USB_DT_DEVICE_QUALIFIER; - qual.bcdUSB = __constant_cpu_to_le16 (0x0200); + qual.bcdUSB = cpu_to_le16 (0x0200); desc = dev->dev; qual.bDeviceClass = desc->bDeviceClass; @@ -1908,7 +1908,7 @@ dev_config (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) || dev->dev->bNumConfigurations != 1) goto fail; dev->dev->bNumConfigurations = 1; - dev->dev->bcdUSB = __constant_cpu_to_le16 (0x0200); + dev->dev->bcdUSB = cpu_to_le16 (0x0200); /* triggers gadgetfs_bind(); then we can enumerate. */ spin_unlock_irq (&dev->lock); diff --git a/drivers/usb/gadget/net2280.c b/drivers/usb/gadget/net2280.c index 12c6d83..9498be8 100644 --- a/drivers/usb/gadget/net2280.c +++ b/drivers/usb/gadget/net2280.c @@ -142,8 +142,8 @@ static char *type_string (u8 bmAttributes) #include "net2280.h" -#define valid_bit __constant_cpu_to_le32 (1 << VALID_BIT) -#define dma_done_ie __constant_cpu_to_le32 (1 << DMA_DONE_INTERRUPT_ENABLE) +#define valid_bit cpu_to_le32 (1 << VALID_BIT) +#define dma_done_ie cpu_to_le32 (1 << DMA_DONE_INTERRUPT_ENABLE) /*-------------------------------------------------------------------------*/ @@ -425,7 +425,7 @@ net2280_alloc_request (struct usb_ep *_ep, gfp_t gfp_flags) return NULL; } td->dmacount = 0; /* not VALID */ - td->dmaaddr = __constant_cpu_to_le32 (DMA_ADDR_INVALID); + td->dmaaddr = cpu_to_le32 (DMA_ADDR_INVALID); td->dmadesc = td->dmaaddr; req->td = td; } @@ -775,7 +775,7 @@ static void start_dma (struct net2280_ep *ep, struct net2280_request *req) fill_dma_desc (ep, req, 1); if (!use_dma_chaining) - req->td->dmacount |= __constant_cpu_to_le32 (1 << END_OF_CHAIN); + req->td->dmacount |= cpu_to_le32 (1 << END_OF_CHAIN); start_queue (ep, tmp, req->td_dma); } @@ -2407,9 +2407,9 @@ static void handle_stat0_irqs (struct net2280 *dev, u32 stat) if (readl (&e->regs->ep_rsp) & (1 << SET_ENDPOINT_HALT)) - status = __constant_cpu_to_le32 (1); + status = cpu_to_le32 (1); else - status = __constant_cpu_to_le32 (0); + status = cpu_to_le32 (0); /* don't bother with a request object! */ writel (0, &dev->epregs [0].ep_irqenb); @@ -2667,7 +2667,7 @@ static void handle_stat1_irqs (struct net2280 *dev, u32 stat) req = list_entry (ep->queue.next, struct net2280_request, queue); dmacount = req->td->dmacount; - dmacount &= __constant_cpu_to_le32 ( + dmacount &= cpu_to_le32 ( (1 << VALID_BIT) | DMA_BYTE_COUNT_MASK); if (dmacount && (dmacount & valid_bit) == 0) @@ -2881,7 +2881,7 @@ static int net2280_probe (struct pci_dev *pdev, const struct pci_device_id *id) goto done; } td->dmacount = 0; /* not VALID */ - td->dmaaddr = __constant_cpu_to_le32 (DMA_ADDR_INVALID); + td->dmaaddr = cpu_to_le32 (DMA_ADDR_INVALID); td->dmadesc = td->dmaaddr; dev->ep [i].dummy = td; } diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c index 5a3034f..2950015 100644 --- a/drivers/usb/gadget/printer.c +++ b/drivers/usb/gadget/printer.c @@ -225,12 +225,12 @@ module_param(qlen, uint, S_IRUGO|S_IWUSR); static struct usb_device_descriptor device_desc = { .bLength = sizeof device_desc, .bDescriptorType = USB_DT_DEVICE, - .bcdUSB = __constant_cpu_to_le16(0x0200), + .bcdUSB = cpu_to_le16(0x0200), .bDeviceClass = USB_CLASS_PER_INTERFACE, .bDeviceSubClass = 0, .bDeviceProtocol = 0, - .idVendor = __constant_cpu_to_le16(PRINTER_VENDOR_NUM), - .idProduct = __constant_cpu_to_le16(PRINTER_PRODUCT_NUM), + .idVendor = cpu_to_le16(PRINTER_VENDOR_NUM), + .idProduct = cpu_to_le16(PRINTER_PRODUCT_NUM), .iManufacturer = STRING_MANUFACTURER, .iProduct = STRING_PRODUCT, .iSerialNumber = STRING_SERIALNUM, @@ -299,20 +299,20 @@ static struct usb_endpoint_descriptor hs_ep_in_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bmAttributes = USB_ENDPOINT_XFER_BULK, - .wMaxPacketSize = __constant_cpu_to_le16(512) + .wMaxPacketSize = cpu_to_le16(512) }; static struct usb_endpoint_descriptor hs_ep_out_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, .bmAttributes = USB_ENDPOINT_XFER_BULK, - .wMaxPacketSize = __constant_cpu_to_le16(512) + .wMaxPacketSize = cpu_to_le16(512) }; static struct usb_qualifier_descriptor dev_qualifier = { .bLength = sizeof dev_qualifier, .bDescriptorType = USB_DT_DEVICE_QUALIFIER, - .bcdUSB = __constant_cpu_to_le16(0x0200), + .bcdUSB = cpu_to_le16(0x0200), .bDeviceClass = USB_CLASS_PRINTER, .bNumConfigurations = 1 }; @@ -1406,16 +1406,16 @@ printer_bind(struct usb_gadget *gadget) gadget->name); /* unrecognized, but safe unless bulk is REALLY quirky */ device_desc.bcdDevice = - __constant_cpu_to_le16(0xFFFF); + cpu_to_le16(0xFFFF); } snprintf(manufacturer, sizeof(manufacturer), "%s %s with %s", init_utsname()->sysname, init_utsname()->release, gadget->name); device_desc.idVendor = - __constant_cpu_to_le16(PRINTER_VENDOR_NUM); + cpu_to_le16(PRINTER_VENDOR_NUM); device_desc.idProduct = - __constant_cpu_to_le16(PRINTER_PRODUCT_NUM); + cpu_to_le16(PRINTER_PRODUCT_NUM); /* support optional vendor/distro customization */ if (idVendor) { diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c index 37879af..f46a609 100644 --- a/drivers/usb/gadget/serial.c +++ b/drivers/usb/gadget/serial.c @@ -87,12 +87,12 @@ static struct usb_gadget_strings *dev_strings[] = { static struct usb_device_descriptor device_desc = { .bLength = USB_DT_DEVICE_SIZE, .bDescriptorType = USB_DT_DEVICE, - .bcdUSB = __constant_cpu_to_le16(0x0200), + .bcdUSB = cpu_to_le16(0x0200), /* .bDeviceClass = f(use_acm) */ .bDeviceSubClass = 0, .bDeviceProtocol = 0, /* .bMaxPacketSize0 = f(hardware) */ - .idVendor = __constant_cpu_to_le16(GS_VENDOR_ID), + .idVendor = cpu_to_le16(GS_VENDOR_ID), /* .idProduct = f(use_acm) */ /* .bcdDevice = f(hardware) */ /* .iManufacturer = DYNAMIC */ @@ -216,7 +216,7 @@ static int __init gs_bind(struct usb_composite_dev *cdev) pr_warning("gs_bind: controller '%s' not recognized\n", gadget->name); device_desc.bcdDevice = - __constant_cpu_to_le16(GS_VERSION_NUM | 0x0099); + cpu_to_le16(GS_VERSION_NUM | 0x0099); } if (gadget_is_otg(cdev->gadget)) { @@ -255,19 +255,19 @@ static int __init init(void) serial_config_driver.bConfigurationValue = 2; device_desc.bDeviceClass = USB_CLASS_COMM; device_desc.idProduct = - __constant_cpu_to_le16(GS_CDC_PRODUCT_ID); + cpu_to_le16(GS_CDC_PRODUCT_ID); } else if (use_obex) { serial_config_driver.label = "CDC OBEX config"; serial_config_driver.bConfigurationValue = 3; device_desc.bDeviceClass = USB_CLASS_COMM; device_desc.idProduct = - __constant_cpu_to_le16(GS_CDC_OBEX_PRODUCT_ID); + cpu_to_le16(GS_CDC_OBEX_PRODUCT_ID); } else { serial_config_driver.label = "Generic Serial config"; serial_config_driver.bConfigurationValue = 1; device_desc.bDeviceClass = USB_CLASS_VENDOR_SPEC; device_desc.idProduct = - __constant_cpu_to_le16(GS_PRODUCT_ID); + cpu_to_le16(GS_PRODUCT_ID); } strings_dev[STRING_DESCRIPTION_IDX].s = serial_config_driver.label; diff --git a/drivers/usb/gadget/u_serial.c b/drivers/usb/gadget/u_serial.c index 53d5928..0a4d99a 100644 --- a/drivers/usb/gadget/u_serial.c +++ b/drivers/usb/gadget/u_serial.c @@ -1092,7 +1092,7 @@ int __init gserial_setup(struct usb_gadget *g, unsigned count) gs_tty_driver->init_termios.c_ispeed = 9600; gs_tty_driver->init_termios.c_ospeed = 9600; - coding.dwDTERate = __constant_cpu_to_le32(9600); + coding.dwDTERate = cpu_to_le32(9600); coding.bCharFormat = 8; coding.bParityType = USB_CDC_NO_PARITY; coding.bDataBits = USB_CDC_1_STOP_BITS; diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c index 361d965..20614dc 100644 --- a/drivers/usb/gadget/zero.c +++ b/drivers/usb/gadget/zero.c @@ -113,11 +113,11 @@ static struct usb_device_descriptor device_desc = { .bLength = sizeof device_desc, .bDescriptorType = USB_DT_DEVICE, - .bcdUSB = __constant_cpu_to_le16(0x0200), + .bcdUSB = cpu_to_le16(0x0200), .bDeviceClass = USB_CLASS_VENDOR_SPEC, - .idVendor = __constant_cpu_to_le16(DRIVER_VENDOR_NUM), - .idProduct = __constant_cpu_to_le16(DRIVER_PRODUCT_NUM), + .idVendor = cpu_to_le16(DRIVER_VENDOR_NUM), + .idProduct = cpu_to_le16(DRIVER_PRODUCT_NUM), .bNumConfigurations = 2, }; @@ -265,7 +265,7 @@ static int __init zero_bind(struct usb_composite_dev *cdev) */ pr_warning("%s: controller '%s' not recognized\n", longname, gadget->name); - device_desc.bcdDevice = __constant_cpu_to_le16(0x9999); + device_desc.bcdDevice = cpu_to_le16(0x9999); } diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index 1d0b49e..ada5d2b 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -563,7 +563,7 @@ static int qh_unlink_periodic(struct ehci_hcd *ehci, struct ehci_qh *qh) // and this qh is active in the current uframe // (and overlay token SplitXstate is false?) // THEN - // qh->hw_info1 |= __constant_cpu_to_hc32(1 << 7 /* "ignore" */); + // qh->hw_info1 |= cpu_to_hc32(1 << 7 /* "ignore" */); /* high bandwidth, or otherwise part of every microframe */ if ((period = qh->period) == 0) diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index 9aba560..6cff195 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -253,7 +253,7 @@ struct ehci_qtd { /* * Now the following defines are not converted using the - * __constant_cpu_to_le32() macro anymore, since we have to support + * cpu_to_le32() macro anymore, since we have to support * "dynamic" switching between be and le support, so that the driver * can be used on one system with SoC EHCI controller using big-endian * descriptors as well as a normal little-endian PCI EHCI controller. diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c index 8ee2f41..3172c0f 100644 --- a/drivers/usb/host/isp1760-hcd.c +++ b/drivers/usb/host/isp1760-hcd.c @@ -644,7 +644,7 @@ static void transform_add_int(struct isp1760_hcd *priv, struct isp1760_qh *qh, if (urb->dev->speed != USB_SPEED_HIGH) { /* split */ - ptd->dw5 = __constant_cpu_to_le32(0x1c); + ptd->dw5 = cpu_to_le32(0x1c); if (qh->period >= 32) period = qh->period / 2; @@ -1054,7 +1054,7 @@ static void do_atl_int(struct usb_hcd *usb_hcd) priv_write_copy(priv, (u32 *)&ptd, usb_hcd->regs + atl_regs, sizeof(ptd)); - ptd.dw0 |= __constant_cpu_to_le32(PTD_VALID); + ptd.dw0 |= cpu_to_le32(PTD_VALID); priv_write_copy(priv, (u32 *)&ptd, usb_hcd->regs + atl_regs, sizeof(ptd)); diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c index 75548f7..2947c69 100644 --- a/drivers/usb/host/oxu210hp-hcd.c +++ b/drivers/usb/host/oxu210hp-hcd.c @@ -845,14 +845,14 @@ static inline void qh_update(struct oxu_hcd *oxu, is_out = !(qtd->hw_token & cpu_to_le32(1 << 8)); epnum = (le32_to_cpup(&qh->hw_info1) >> 8) & 0x0f; if (unlikely(!usb_gettoggle(qh->dev, epnum, is_out))) { - qh->hw_token &= ~__constant_cpu_to_le32(QTD_TOGGLE); + qh->hw_token &= ~cpu_to_le32(QTD_TOGGLE); usb_settoggle(qh->dev, epnum, is_out, 1); } } /* HC must see latest qtd and qh data before we clear ACTIVE+HALT */ wmb(); - qh->hw_token &= __constant_cpu_to_le32(QTD_TOGGLE | QTD_STS_PING); + qh->hw_token &= cpu_to_le32(QTD_TOGGLE | QTD_STS_PING); } /* If it weren't for a common silicon quirk (writing the dummy into the qh @@ -937,7 +937,7 @@ __acquires(oxu->lock) struct ehci_qh *qh = (struct ehci_qh *) urb->hcpriv; /* S-mask in a QH means it's an interrupt urb */ - if ((qh->hw_info2 & __constant_cpu_to_le32(QH_SMASK)) != 0) { + if ((qh->hw_info2 & cpu_to_le32(QH_SMASK)) != 0) { /* ... update hc-wide periodic stats (for usbfs) */ oxu_to_hcd(oxu)->self.bandwidth_int_reqs--; @@ -981,7 +981,7 @@ static void unlink_async(struct oxu_hcd *oxu, struct ehci_qh *qh); static void intr_deschedule(struct oxu_hcd *oxu, struct ehci_qh *qh); static int qh_schedule(struct oxu_hcd *oxu, struct ehci_qh *qh); -#define HALT_BIT __constant_cpu_to_le32(QTD_STS_HALT) +#define HALT_BIT cpu_to_le32(QTD_STS_HALT) /* Process and free completed qtds for a qh, returning URBs to drivers. * Chases up to qh->hw_current. Returns number of completions called, @@ -1160,7 +1160,7 @@ halt: /* should be rare for periodic transfers, * except maybe high bandwidth ... */ - if ((__constant_cpu_to_le32(QH_SMASK) + if ((cpu_to_le32(QH_SMASK) & qh->hw_info2) != 0) { intr_deschedule(oxu, qh); (void) qh_schedule(oxu, qh); @@ -1350,7 +1350,7 @@ static struct list_head *qh_urb_transaction(struct oxu_hcd *oxu, } /* by default, enable interrupt on urb completion */ - qtd->hw_token |= __constant_cpu_to_le32(QTD_IOC); + qtd->hw_token |= cpu_to_le32(QTD_IOC); return head; cleanup: @@ -1539,7 +1539,7 @@ static void qh_link_async(struct oxu_hcd *oxu, struct ehci_qh *qh) /* qtd completions reported later by interrupt */ } -#define QH_ADDR_MASK __constant_cpu_to_le32(0x7f) +#define QH_ADDR_MASK cpu_to_le32(0x7f) /* * For control/bulk/interrupt, return QH with these TDs appended. @@ -2012,7 +2012,7 @@ static void qh_unlink_periodic(struct oxu_hcd *oxu, struct ehci_qh *qh) * and this qh is active in the current uframe * (and overlay token SplitXstate is false?) * THEN - * qh->hw_info1 |= __constant_cpu_to_le32(1 << 7 "ignore"); + * qh->hw_info1 |= cpu_to_le32(1 << 7 "ignore"); */ /* high bandwidth, or otherwise part of every microframe */ @@ -2057,7 +2057,7 @@ static void intr_deschedule(struct oxu_hcd *oxu, struct ehci_qh *qh) * active high speed queues may need bigger delays... */ if (list_empty(&qh->qtd_list) - || (__constant_cpu_to_le32(QH_CMASK) & qh->hw_info2) != 0) + || (cpu_to_le32(QH_CMASK) & qh->hw_info2) != 0) wait = 2; else wait = 55; /* worst case: 3 * 1024 */ @@ -2183,10 +2183,10 @@ static int qh_schedule(struct oxu_hcd *oxu, struct ehci_qh *qh) qh->start = frame; /* reset S-frame and (maybe) C-frame masks */ - qh->hw_info2 &= __constant_cpu_to_le32(~(QH_CMASK | QH_SMASK)); + qh->hw_info2 &= cpu_to_le32(~(QH_CMASK | QH_SMASK)); qh->hw_info2 |= qh->period ? cpu_to_le32(1 << uframe) - : __constant_cpu_to_le32(QH_SMASK); + : cpu_to_le32(QH_SMASK); qh->hw_info2 |= c_mask; } else oxu_dbg(oxu, "reused qh %p schedule\n", qh); diff --git a/drivers/usb/host/oxu210hp.h b/drivers/usb/host/oxu210hp.h index 8910e27..1c216ad 100644 --- a/drivers/usb/host/oxu210hp.h +++ b/drivers/usb/host/oxu210hp.h @@ -235,21 +235,21 @@ struct ehci_qtd { } __attribute__ ((aligned(32))); /* mask NakCnt+T in qh->hw_alt_next */ -#define QTD_MASK __constant_cpu_to_le32 (~0x1f) +#define QTD_MASK cpu_to_le32 (~0x1f) #define IS_SHORT_READ(token) (QTD_LENGTH(token) != 0 && QTD_PID(token) == 1) /* Type tag from {qh, itd, sitd, fstn}->hw_next */ -#define Q_NEXT_TYPE(dma) ((dma) & __constant_cpu_to_le32 (3 << 1)) +#define Q_NEXT_TYPE(dma) ((dma) & cpu_to_le32 (3 << 1)) /* values for that type tag */ -#define Q_TYPE_QH __constant_cpu_to_le32 (1 << 1) +#define Q_TYPE_QH cpu_to_le32 (1 << 1) /* next async queue entry, or pointer to interrupt/periodic QH */ #define QH_NEXT(dma) (cpu_to_le32(((u32)dma)&~0x01f)|Q_TYPE_QH) /* for periodic/async schedules and qtd lists, mark end of list */ -#define EHCI_LIST_END __constant_cpu_to_le32(1) /* "null pointer" to hw */ +#define EHCI_LIST_END cpu_to_le32(1) /* "null pointer" to hw */ /* * Entries in periodic shadow table are pointers to one of four kinds diff --git a/drivers/usb/host/uhci-hcd.h b/drivers/usb/host/uhci-hcd.h index 7d01c56..26bd1b2 100644 --- a/drivers/usb/host/uhci-hcd.h +++ b/drivers/usb/host/uhci-hcd.h @@ -73,11 +73,11 @@ #define USBLEGSUP_RWC 0x8f00 /* the R/WC bits */ #define USBLEGSUP_RO 0x5040 /* R/O and reserved bits */ -#define UHCI_PTR_BITS __constant_cpu_to_le32(0x000F) -#define UHCI_PTR_TERM __constant_cpu_to_le32(0x0001) -#define UHCI_PTR_QH __constant_cpu_to_le32(0x0002) -#define UHCI_PTR_DEPTH __constant_cpu_to_le32(0x0004) -#define UHCI_PTR_BREADTH __constant_cpu_to_le32(0x0000) +#define UHCI_PTR_BITS cpu_to_le32(0x000F) +#define UHCI_PTR_TERM cpu_to_le32(0x0001) +#define UHCI_PTR_QH cpu_to_le32(0x0002) +#define UHCI_PTR_DEPTH cpu_to_le32(0x0004) +#define UHCI_PTR_BREADTH cpu_to_le32(0x0000) #define UHCI_NUMFRAMES 1024 /* in the frame list [array] */ #define UHCI_MAX_SOF_NUMBER 2047 /* in an SOF packet */ diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c index 5631d89..58f8736 100644 --- a/drivers/usb/host/uhci-q.c +++ b/drivers/usb/host/uhci-q.c @@ -402,7 +402,7 @@ static void uhci_fixup_toggles(struct uhci_qh *qh, int skip_first) /* Otherwise all the toggles in the URB have to be switched */ } else { list_for_each_entry(td, &urbp->td_list, list) { - td->token ^= __constant_cpu_to_le32( + td->token ^= cpu_to_le32( TD_TOKEN_TOGGLE); toggle ^= 1; } @@ -883,7 +883,7 @@ static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb, uhci_fill_td(td, 0, USB_PID_OUT | uhci_explen(0), 0); wmb(); - qh->dummy_td->status |= __constant_cpu_to_le32(TD_CTRL_ACTIVE); + qh->dummy_td->status |= cpu_to_le32(TD_CTRL_ACTIVE); qh->dummy_td = td; /* Low-speed transfers get a different queue, and won't hog the bus. @@ -1003,7 +1003,7 @@ static int uhci_submit_common(struct uhci_hcd *uhci, struct urb *urb, * fast side but not enough to justify delaying an interrupt * more than 2 or 3 URBs, so we will ignore the URB_NO_INTERRUPT * flag setting. */ - td->status |= __constant_cpu_to_le32(TD_CTRL_IOC); + td->status |= cpu_to_le32(TD_CTRL_IOC); /* * Build the new dummy TD and activate the old one @@ -1015,7 +1015,7 @@ static int uhci_submit_common(struct uhci_hcd *uhci, struct urb *urb, uhci_fill_td(td, 0, USB_PID_OUT | uhci_explen(0), 0); wmb(); - qh->dummy_td->status |= __constant_cpu_to_le32(TD_CTRL_ACTIVE); + qh->dummy_td->status |= cpu_to_le32(TD_CTRL_ACTIVE); qh->dummy_td = td; usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), @@ -1317,7 +1317,7 @@ static int uhci_submit_isochronous(struct uhci_hcd *uhci, struct urb *urb, } /* Set the interrupt-on-completion flag on the last packet. */ - td->status |= __constant_cpu_to_le32(TD_CTRL_IOC); + td->status |= cpu_to_le32(TD_CTRL_IOC); /* Add the TDs to the frame list */ frame = urb->start_frame; diff --git a/drivers/usb/image/mdc800.c b/drivers/usb/image/mdc800.c index 972f20b..eca355d 100644 --- a/drivers/usb/image/mdc800.c +++ b/drivers/usb/image/mdc800.c @@ -188,7 +188,7 @@ static struct usb_endpoint_descriptor mdc800_ed [4] = .bDescriptorType = 0, .bEndpointAddress = 0x01, .bmAttributes = 0x02, - .wMaxPacketSize = __constant_cpu_to_le16(8), + .wMaxPacketSize = cpu_to_le16(8), .bInterval = 0, .bRefresh = 0, .bSynchAddress = 0, @@ -198,7 +198,7 @@ static struct usb_endpoint_descriptor mdc800_ed [4] = .bDescriptorType = 0, .bEndpointAddress = 0x82, .bmAttributes = 0x03, - .wMaxPacketSize = __constant_cpu_to_le16(8), + .wMaxPacketSize = cpu_to_le16(8), .bInterval = 0, .bRefresh = 0, .bSynchAddress = 0, @@ -208,7 +208,7 @@ static struct usb_endpoint_descriptor mdc800_ed [4] = .bDescriptorType = 0, .bEndpointAddress = 0x03, .bmAttributes = 0x02, - .wMaxPacketSize = __constant_cpu_to_le16(64), + .wMaxPacketSize = cpu_to_le16(64), .bInterval = 0, .bRefresh = 0, .bSynchAddress = 0, @@ -218,7 +218,7 @@ static struct usb_endpoint_descriptor mdc800_ed [4] = .bDescriptorType = 0, .bEndpointAddress = 0x84, .bmAttributes = 0x02, - .wMaxPacketSize = __constant_cpu_to_le16(64), + .wMaxPacketSize = cpu_to_le16(64), .bInterval = 0, .bRefresh = 0, .bSynchAddress = 0, diff --git a/drivers/usb/musb/musb_virthub.c b/drivers/usb/musb/musb_virthub.c index e0e9ce5..bf677ac 100644 --- a/drivers/usb/musb/musb_virthub.c +++ b/drivers/usb/musb/musb_virthub.c @@ -285,7 +285,7 @@ int musb_hub_control( desc->bDescLength = 9; desc->bDescriptorType = 0x29; desc->bNbrPorts = 1; - desc->wHubCharacteristics = __constant_cpu_to_le16( + desc->wHubCharacteristics = cpu_to_le16( 0x0001 /* per-port power switching */ | 0x0010 /* no overcurrent reporting */ ); -- cgit v1.1 From d0626808f7a6181c1c750d261da9a7a845c29e13 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Fri, 13 Feb 2009 11:22:06 -0800 Subject: USB: fix ehci printk formats Fix ehci printk formats: drivers/usb/host/ehci-q.c:351: warning: format '%d' expects type 'int', but argument 4 has type 'size_t' drivers/usb/host/ehci-q.c:351: warning: format '%d' expects type 'int', but argument 5 has type 'size_t' Signed-off-by: Randy Dunlap Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-q.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/ehci-q.c b/drivers/usb/host/ehci-q.c index 01132ac..1976b1b 100644 --- a/drivers/usb/host/ehci-q.c +++ b/drivers/usb/host/ehci-q.c @@ -349,7 +349,7 @@ qh_completions (struct ehci_hcd *ehci, struct ehci_qh *qh) --qh->xacterrs > 0 && !urb->unlinked) { ehci_dbg(ehci, - "detected XactErr len %d/%d retry %d\n", + "detected XactErr len %zu/%zu retry %d\n", qtd->length - QTD_LENGTH(token), qtd->length, QH_XACTERR_MAX - qh->xacterrs); -- cgit v1.1 From e4abe6658aa17a5d7e7321dfda807d287255511b Mon Sep 17 00:00:00 2001 From: Dave Young Date: Sat, 14 Feb 2009 21:21:13 +0800 Subject: usb-serial: fix usb_serial_register bug when boot with nousb param With "nousb" cmdline booting, built-in serial drivers (ie. airecable) will trigger kernel oops. Indeed, if nousb, usb_serial_init will failed, and the usb serial bus type will not be registerd, then usb_serial_register call driver_register which try to register the driver to a not registered bus. Here add usb_disabled() check in usb_serial_register to fix it. Signed-off-by: Dave Young Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/usb-serial.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 7317289..742a5bc 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -1241,6 +1241,9 @@ int usb_serial_register(struct usb_serial_driver *driver) /* must be called with BKL held */ int retval; + if (usb_disabled()) + return -ENODEV; + fixup_generic(driver); if (!driver->description) -- cgit v1.1 From e6e244b6cb1f70e7109381626293cd40a8334ed3 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 12 Feb 2009 14:47:44 -0500 Subject: usb-storage: prepare for subdriver separation This patch (as1206) is the first step in converting usb-storage's subdrivers into separate modules. It makes the following large-scale changes: Remove a bunch of unnecessary #ifdef's from usb_usual.h. Not truly necessary, but it does clean things up. Move the USB device-ID table (which is duplicated between libusual and usb-storage) into its own source file, usual-tables.c, and arrange for this to be linked with either libusual or usb-storage according to whether USB_LIBUSUAL is configured. Add to usual-tables.c a new usb_usual_ignore_device() function to detect whether a particular device needs to be managed by a subdriver and not by the standard handlers in usb-storage. Export a whole bunch of functions in usb-storage, renaming some of them because their names don't already begin with "usb_stor_". These functions will be needed by the new subdriver modules. Split usb-storage's probe routine into two functions. The subdrivers will call the probe1 routine, then fill in their transport and protocol settings, and then call the probe2 routine. Take the default cases and error checking out of get_transport() and get_protocol(), which run during probe1, and instead put a check for invalid transport or protocol values into the probe2 function. Add a new probe routine to be used for standard devices, i.e., those that don't need a subdriver. This new routine checks whether the device should be ignored (because it should be handled by ub or by a subdriver), and if not, calls the probe1 and probe2 functions. Signed-off-by: Alan Stern CC: Matthew Dharm Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/Makefile | 6 +- drivers/usb/storage/libusual.c | 33 +----- drivers/usb/storage/protocol.c | 3 + drivers/usb/storage/scsiglue.c | 2 +- drivers/usb/storage/transport.c | 10 ++ drivers/usb/storage/usb.c | 209 ++++++++++++++++++++----------------- drivers/usb/storage/usb.h | 21 ++++ drivers/usb/storage/usual-tables.c | 105 +++++++++++++++++++ 8 files changed, 256 insertions(+), 133 deletions(-) create mode 100644 drivers/usb/storage/usual-tables.c (limited to 'drivers/usb') diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile index b320693..a9e475e 100644 --- a/drivers/usb/storage/Makefile +++ b/drivers/usb/storage/Makefile @@ -25,6 +25,8 @@ usb-storage-obj-$(CONFIG_USB_STORAGE_CYPRESS_ATACB) += cypress_atacb.o usb-storage-objs := scsiglue.o protocol.o transport.o usb.o \ initializers.o sierra_ms.o option_ms.o $(usb-storage-obj-y) -ifneq ($(CONFIG_USB_LIBUSUAL),) - obj-$(CONFIG_USB) += libusual.o +ifeq ($(CONFIG_USB_LIBUSUAL),) + usb-storage-objs += usual-tables.o +else + obj-$(CONFIG_USB) += libusual.o usual-tables.o endif diff --git a/drivers/usb/storage/libusual.c b/drivers/usb/storage/libusual.c index f970b27..fe3ffe1 100644 --- a/drivers/usb/storage/libusual.c +++ b/drivers/usb/storage/libusual.c @@ -38,37 +38,6 @@ static atomic_t total_threads = ATOMIC_INIT(0); static int usu_probe_thread(void *arg); /* - * The table. - */ -#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ - vendorName, productName,useProtocol, useTransport, \ - initFunction, flags) \ -{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin,bcdDeviceMax), \ - .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } - -#define COMPLIANT_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ - vendorName, productName, useProtocol, useTransport, \ - initFunction, flags) \ -{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ - .driver_info = (flags) } - -#define USUAL_DEV(useProto, useTrans, useType) \ -{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, useProto, useTrans), \ - .driver_info = ((useType)<<24) } - -struct usb_device_id storage_usb_ids [] = { -# include "unusual_devs.h" - { } /* Terminating entry */ -}; - -#undef USUAL_DEV -#undef UNUSUAL_DEV -#undef COMPLIANT_DEV - -MODULE_DEVICE_TABLE(usb, storage_usb_ids); -EXPORT_SYMBOL_GPL(storage_usb_ids); - -/* * @type: the module type as an integer */ void usb_usual_set_present(int type) @@ -167,7 +136,7 @@ static struct usb_driver usu_driver = { .name = "libusual", .probe = usu_probe, .disconnect = usu_disconnect, - .id_table = storage_usb_ids, + .id_table = usb_storage_usb_ids, }; /* diff --git a/drivers/usb/storage/protocol.c b/drivers/usb/storage/protocol.c index be441d8..fc310f7 100644 --- a/drivers/usb/storage/protocol.c +++ b/drivers/usb/storage/protocol.c @@ -121,6 +121,7 @@ void usb_stor_transparent_scsi_command(struct scsi_cmnd *srb, /* send the command to the transport layer */ usb_stor_invoke_transport(srb, us); } +EXPORT_SYMBOL_GPL(usb_stor_transparent_scsi_command); /*********************************************************************** * Scatter-gather transfer buffer access routines @@ -199,6 +200,7 @@ unsigned int usb_stor_access_xfer_buf(unsigned char *buffer, /* Return the amount actually transferred */ return cnt; } +EXPORT_SYMBOL_GPL(usb_stor_access_xfer_buf); /* Store the contents of buffer into srb's transfer buffer and set the * SCSI residue. @@ -215,3 +217,4 @@ void usb_stor_set_xfer_buf(unsigned char *buffer, if (buflen < scsi_bufflen(srb)) scsi_set_resid(srb, scsi_bufflen(srb) - buflen); } +EXPORT_SYMBOL_GPL(usb_stor_set_xfer_buf); diff --git a/drivers/usb/storage/scsiglue.c b/drivers/usb/storage/scsiglue.c index ed710bc..4ca3b58 100644 --- a/drivers/usb/storage/scsiglue.c +++ b/drivers/usb/storage/scsiglue.c @@ -569,4 +569,4 @@ unsigned char usb_stor_sense_invalidCDB[18] = { [7] = 0x0a, /* additional length */ [12] = 0x24 /* Invalid Field in CDB */ }; - +EXPORT_SYMBOL_GPL(usb_stor_sense_invalidCDB); diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c index fb65d221..d48c855 100644 --- a/drivers/usb/storage/transport.c +++ b/drivers/usb/storage/transport.c @@ -220,6 +220,7 @@ int usb_stor_control_msg(struct us_data *us, unsigned int pipe, status = us->current_urb->actual_length; return status; } +EXPORT_SYMBOL_GPL(usb_stor_control_msg); /* This is a version of usb_clear_halt() that allows early termination and * doesn't read the status from the device -- this is because some devices @@ -254,6 +255,7 @@ int usb_stor_clear_halt(struct us_data *us, unsigned int pipe) US_DEBUGP("%s: result = %d\n", __func__, result); return result; } +EXPORT_SYMBOL_GPL(usb_stor_clear_halt); /* @@ -352,6 +354,7 @@ int usb_stor_ctrl_transfer(struct us_data *us, unsigned int pipe, return interpret_urb_result(us, pipe, size, result, us->current_urb->actual_length); } +EXPORT_SYMBOL_GPL(usb_stor_ctrl_transfer); /* * Receive one interrupt buffer, without timeouts, but allowing early @@ -407,6 +410,7 @@ int usb_stor_bulk_transfer_buf(struct us_data *us, unsigned int pipe, return interpret_urb_result(us, pipe, length, result, us->current_urb->actual_length); } +EXPORT_SYMBOL_GPL(usb_stor_bulk_transfer_buf); /* * Transfer a scatter-gather list via bulk transfer @@ -474,6 +478,7 @@ int usb_stor_bulk_srb(struct us_data* us, unsigned int pipe, scsi_set_resid(srb, scsi_bufflen(srb) - partial); return result; } +EXPORT_SYMBOL_GPL(usb_stor_bulk_srb); /* * Transfer an entire SCSI command's worth of data payload over the bulk @@ -509,6 +514,7 @@ int usb_stor_bulk_transfer_sg(struct us_data* us, unsigned int pipe, *residual = length_left; return result; } +EXPORT_SYMBOL_GPL(usb_stor_bulk_transfer_sg); /*********************************************************************** * Transport routines @@ -940,6 +946,7 @@ int usb_stor_CB_transport(struct scsi_cmnd *srb, struct us_data *us) usb_stor_clear_halt(us, pipe); return USB_STOR_TRANSPORT_FAILED; } +EXPORT_SYMBOL_GPL(usb_stor_CB_transport); /* * Bulk only transport @@ -1156,6 +1163,7 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us) /* we should never get here, but if we do, we're in trouble */ return USB_STOR_TRANSPORT_ERROR; } +EXPORT_SYMBOL_GPL(usb_stor_Bulk_transport); /*********************************************************************** * Reset routines @@ -1230,6 +1238,7 @@ int usb_stor_CB_reset(struct us_data *us) USB_TYPE_CLASS | USB_RECIP_INTERFACE, 0, us->ifnum, us->iobuf, CB_RESET_CMD_SIZE); } +EXPORT_SYMBOL_GPL(usb_stor_CB_reset); /* This issues a Bulk-only Reset to the device in question, including * clearing the subsequent endpoint halts that may occur. @@ -1242,6 +1251,7 @@ int usb_stor_Bulk_reset(struct us_data *us) USB_TYPE_CLASS | USB_RECIP_INTERFACE, 0, us->ifnum, NULL, 0); } +EXPORT_SYMBOL_GPL(usb_stor_Bulk_reset); /* Issue a USB port reset to the device. The caller must not hold * us->dev_mutex. diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index b01dade..490ea76 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -5,7 +5,7 @@ * * Developed with the assistance of: * (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org) - * (c) 2003 Alan Stern (stern@rowland.harvard.edu) + * (c) 2003-2009 Alan Stern (stern@rowland.harvard.edu) * * Initial work by: * (c) 1999 Michael Gee (michael@linuxspecific.com) @@ -118,36 +118,8 @@ MODULE_PARM_DESC(quirks, "supplemental list of device IDs and their quirks"); /* * The entries in this table correspond, line for line, - * with the entries of us_unusual_dev_list[]. + * with the entries in usb_storage_usb_ids[], defined in usual-tables.c. */ -#ifndef CONFIG_USB_LIBUSUAL - -#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ - vendorName, productName,useProtocol, useTransport, \ - initFunction, flags) \ -{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin,bcdDeviceMax), \ - .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } - -#define COMPLIANT_DEV UNUSUAL_DEV - -#define USUAL_DEV(useProto, useTrans, useType) \ -{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, useProto, useTrans), \ - .driver_info = (USB_US_TYPE_STOR<<24) } - -static struct usb_device_id storage_usb_ids [] = { - -# include "unusual_devs.h" -#undef UNUSUAL_DEV -#undef COMPLIANT_DEV -#undef USUAL_DEV - /* Terminating entry */ - { } -}; - -MODULE_DEVICE_TABLE (usb, storage_usb_ids); -#endif /* CONFIG_USB_LIBUSUAL */ - -/* This is the list of devices we recognize, along with their flag data */ /* The vendor name should be kept at eight characters or less, and * the product name should be kept at 16 characters or less. If a device @@ -179,18 +151,17 @@ MODULE_DEVICE_TABLE (usb, storage_usb_ids); static struct us_unusual_dev us_unusual_dev_list[] = { # include "unusual_devs.h" -# undef UNUSUAL_DEV -# undef COMPLIANT_DEV -# undef USUAL_DEV - - /* Terminating entry */ - { NULL } + { } /* Terminating entry */ }; +#undef UNUSUAL_DEV +#undef COMPLIANT_DEV +#undef USUAL_DEV + #ifdef CONFIG_PM /* Minimal support for suspend and resume */ -static int storage_suspend(struct usb_interface *iface, pm_message_t message) +int usb_stor_suspend(struct usb_interface *iface, pm_message_t message) { struct us_data *us = usb_get_intfdata(iface); @@ -207,8 +178,9 @@ static int storage_suspend(struct usb_interface *iface, pm_message_t message) mutex_unlock(&us->dev_mutex); return 0; } +EXPORT_SYMBOL_GPL(usb_stor_suspend); -static int storage_resume(struct usb_interface *iface) +int usb_stor_resume(struct usb_interface *iface) { struct us_data *us = usb_get_intfdata(iface); @@ -221,8 +193,9 @@ static int storage_resume(struct usb_interface *iface) mutex_unlock(&us->dev_mutex); return 0; } +EXPORT_SYMBOL_GPL(usb_stor_resume); -static int storage_reset_resume(struct usb_interface *iface) +int usb_stor_reset_resume(struct usb_interface *iface) { struct us_data *us = usb_get_intfdata(iface); @@ -235,6 +208,7 @@ static int storage_reset_resume(struct usb_interface *iface) * the device */ return 0; } +EXPORT_SYMBOL_GPL(usb_stor_reset_resume); #endif /* CONFIG_PM */ @@ -243,7 +217,7 @@ static int storage_reset_resume(struct usb_interface *iface) * a USB port reset, whether from this driver or a different one. */ -static int storage_pre_reset(struct usb_interface *iface) +int usb_stor_pre_reset(struct usb_interface *iface) { struct us_data *us = usb_get_intfdata(iface); @@ -253,8 +227,9 @@ static int storage_pre_reset(struct usb_interface *iface) mutex_lock(&us->dev_mutex); return 0; } +EXPORT_SYMBOL_GPL(usb_stor_pre_reset); -static int storage_post_reset(struct usb_interface *iface) +int usb_stor_post_reset(struct usb_interface *iface) { struct us_data *us = usb_get_intfdata(iface); @@ -269,6 +244,7 @@ static int storage_post_reset(struct usb_interface *iface) mutex_unlock(&us->dev_mutex); return 0; } +EXPORT_SYMBOL_GPL(usb_stor_post_reset); /* * fill_inquiry_response takes an unsigned char array (which must @@ -311,6 +287,7 @@ void fill_inquiry_response(struct us_data *us, unsigned char *data, usb_stor_set_xfer_buf(data, data_len, us->srb); } +EXPORT_SYMBOL_GPL(fill_inquiry_response); static int usb_stor_control_thread(void * __us) { @@ -551,20 +528,13 @@ static void adjust_quirks(struct us_data *us) vid, pid, f); } -/* Find an unusual_dev descriptor (always succeeds in the current code) */ -static struct us_unusual_dev *find_unusual(const struct usb_device_id *id) -{ - const int id_index = id - storage_usb_ids; - return &us_unusual_dev_list[id_index]; -} - /* Get the unusual_devs entries and the string descriptors */ -static int get_device_info(struct us_data *us, const struct usb_device_id *id) +static int get_device_info(struct us_data *us, const struct usb_device_id *id, + struct us_unusual_dev *unusual_dev) { struct usb_device *dev = us->pusb_dev; struct usb_interface_descriptor *idesc = &us->pusb_intf->cur_altsetting->desc; - struct us_unusual_dev *unusual_dev = find_unusual(id); /* Store the entries */ us->unusual_dev = unusual_dev; @@ -629,7 +599,7 @@ static int get_device_info(struct us_data *us, const struct usb_device_id *id) } /* Get the transport settings */ -static int get_transport(struct us_data *us) +static void get_transport(struct us_data *us) { switch (us->protocol) { case US_PR_CB: @@ -732,19 +702,11 @@ static int get_transport(struct us_data *us) break; #endif - default: - return -EIO; } - US_DEBUGP("Transport: %s\n", us->transport_name); - - /* fix for single-lun devices */ - if (us->fflags & US_FL_SINGLE_LUN) - us->max_lun = 0; - return 0; } /* Get the protocol settings */ -static int get_protocol(struct us_data *us) +static void get_protocol(struct us_data *us) { switch (us->subclass) { case US_SC_RBC: @@ -794,11 +756,7 @@ static int get_protocol(struct us_data *us) break; #endif - default: - return -EIO; } - US_DEBUGP("Protocol: %s\n", us->protocol_name); - return 0; } /* Get the pipe settings */ @@ -1012,17 +970,15 @@ static int usb_stor_scan_thread(void * __us) } -/* Probe to see if we can drive a newly-connected USB device */ -static int storage_probe(struct usb_interface *intf, - const struct usb_device_id *id) +/* First part of general USB mass-storage probing */ +int usb_stor_probe1(struct us_data **pus, + struct usb_interface *intf, + const struct usb_device_id *id, + struct us_unusual_dev *unusual_dev) { struct Scsi_Host *host; struct us_data *us; int result; - struct task_struct *th; - - if (usb_usual_check_type(id, USB_US_TYPE_STOR)) - return -ENXIO; US_DEBUGP("USB Mass Storage device detected\n"); @@ -1041,7 +997,7 @@ static int storage_probe(struct usb_interface *intf, * Allow 16-byte CDBs and thus > 2TB */ host->max_cmd_len = 16; - us = host_to_us(host); + *pus = us = host_to_us(host); memset(us, 0, sizeof(struct us_data)); mutex_init(&(us->dev_mutex)); init_completion(&us->cmnd_ready); @@ -1054,24 +1010,46 @@ static int storage_probe(struct usb_interface *intf, if (result) goto BadDevice; - /* - * Get the unusual_devs entries and the descriptors - * - * id_index is calculated in the declaration to be the index number - * of the match from the usb_device_id table, so we can find the - * corresponding entry in the private table. - */ - result = get_device_info(us, id); + /* Get the unusual_devs entries and the descriptors */ + result = get_device_info(us, id, unusual_dev); if (result) goto BadDevice; - /* Get the transport, protocol, and pipe settings */ - result = get_transport(us); - if (result) - goto BadDevice; - result = get_protocol(us); - if (result) + /* Get standard transport and protocol settings */ + get_transport(us); + get_protocol(us); + + /* Give the caller a chance to fill in specialized transport + * or protocol settings. + */ + return 0; + +BadDevice: + US_DEBUGP("storage_probe() failed\n"); + release_everything(us); + return result; +} +EXPORT_SYMBOL_GPL(usb_stor_probe1); + +/* Second part of general USB mass-storage probing */ +int usb_stor_probe2(struct us_data *us) +{ + struct task_struct *th; + int result; + + /* Make sure the transport and protocol have both been set */ + if (!us->transport || !us->proto_handler) { + result = -ENXIO; goto BadDevice; + } + US_DEBUGP("Transport: %s\n", us->transport_name); + US_DEBUGP("Protocol: %s\n", us->protocol_name); + + /* fix for single-lun devices */ + if (us->fflags & US_FL_SINGLE_LUN) + us->max_lun = 0; + + /* Find the endpoints and calculate pipe values */ result = get_pipes(us); if (result) goto BadDevice; @@ -1080,7 +1058,7 @@ static int storage_probe(struct usb_interface *intf, result = usb_stor_acquire_resources(us); if (result) goto BadDevice; - result = scsi_add_host(host, &intf->dev); + result = scsi_add_host(us_to_host(us), &us->pusb_intf->dev); if (result) { printk(KERN_WARNING USB_STORAGE "Unable to add the scsi host\n"); @@ -1108,9 +1086,10 @@ BadDevice: release_everything(us); return result; } +EXPORT_SYMBOL_GPL(usb_stor_probe2); -/* Handle a disconnect event from the USB core */ -static void storage_disconnect(struct usb_interface *intf) +/* Handle a USB mass-storage disconnect */ +void usb_stor_disconnect(struct usb_interface *intf) { struct us_data *us = usb_get_intfdata(intf); @@ -1118,6 +1097,42 @@ static void storage_disconnect(struct usb_interface *intf) quiesce_and_remove_host(us); release_everything(us); } +EXPORT_SYMBOL_GPL(usb_stor_disconnect); + +/* The main probe routine for standard devices */ +static int storage_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct us_data *us; + int result; + + /* + * If libusual is configured, let it decide whether a standard + * device should be handled by usb-storage or by ub. + * If the device isn't standard (is handled by a subdriver + * module) then don't accept it. + */ + if (usb_usual_check_type(id, USB_US_TYPE_STOR) || + usb_usual_ignore_device(intf)) + return -ENXIO; + + /* + * Call the general probe procedures. + * + * The unusual_dev_list array is parallel to the usb_storage_usb_ids + * table, so we use the index of the id entry to find the + * corresponding unusual_devs entry. + */ + result = usb_stor_probe1(&us, intf, id, + (id - usb_storage_usb_ids) + us_unusual_dev_list); + if (result) + return result; + + /* No special transport or protocol settings in the main module */ + + result = usb_stor_probe2(us); + return result; +} /*********************************************************************** * Initialization and registration @@ -1126,15 +1141,13 @@ static void storage_disconnect(struct usb_interface *intf) static struct usb_driver usb_storage_driver = { .name = "usb-storage", .probe = storage_probe, - .disconnect = storage_disconnect, -#ifdef CONFIG_PM - .suspend = storage_suspend, - .resume = storage_resume, - .reset_resume = storage_reset_resume, -#endif - .pre_reset = storage_pre_reset, - .post_reset = storage_post_reset, - .id_table = storage_usb_ids, + .disconnect = usb_stor_disconnect, + .suspend = usb_stor_suspend, + .resume = usb_stor_resume, + .reset_resume = usb_stor_reset_resume, + .pre_reset = usb_stor_pre_reset, + .post_reset = usb_stor_post_reset, + .id_table = usb_storage_usb_ids, .soft_unbind = 1, }; diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h index 65e674e..2609efb 100644 --- a/drivers/usb/storage/usb.h +++ b/drivers/usb/storage/usb.h @@ -177,4 +177,25 @@ extern void fill_inquiry_response(struct us_data *us, #define scsi_unlock(host) spin_unlock_irq(host->host_lock) #define scsi_lock(host) spin_lock_irq(host->host_lock) +/* General routines provided by the usb-storage standard core */ +#ifdef CONFIG_PM +extern int usb_stor_suspend(struct usb_interface *iface, pm_message_t message); +extern int usb_stor_resume(struct usb_interface *iface); +extern int usb_stor_reset_resume(struct usb_interface *iface); +#else +#define usb_stor_suspend NULL +#define usb_stor_resume NULL +#define usb_stor_reset_resume NULL +#endif + +extern int usb_stor_pre_reset(struct usb_interface *iface); +extern int usb_stor_post_reset(struct usb_interface *iface); + +extern int usb_stor_probe1(struct us_data **pus, + struct usb_interface *intf, + const struct usb_device_id *id, + struct us_unusual_dev *unusual_dev); +extern int usb_stor_probe2(struct us_data *us); +extern void usb_stor_disconnect(struct usb_interface *intf); + #endif diff --git a/drivers/usb/storage/usual-tables.c b/drivers/usb/storage/usual-tables.c new file mode 100644 index 0000000..1924e32 --- /dev/null +++ b/drivers/usb/storage/usual-tables.c @@ -0,0 +1,105 @@ +/* Driver for USB Mass Storage devices + * Usual Tables File for usb-storage and libusual + * + * Copyright (C) 2009 Alan Stern (stern@rowland.harvard.edu) + * + * Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more + * information about this driver. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include + + +/* + * The table of devices + */ +#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ + .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + +#define COMPLIANT_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ + .driver_info = (flags) } + +#define USUAL_DEV(useProto, useTrans, useType) \ +{ USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, useProto, useTrans), \ + .driver_info = ((useType)<<24) } + +struct usb_device_id usb_storage_usb_ids[] = { +# include "unusual_devs.h" + { } /* Terminating entry */ +}; +EXPORT_SYMBOL_GPL(usb_storage_usb_ids); + +MODULE_DEVICE_TABLE(usb, usb_storage_usb_ids); + +#undef UNUSUAL_DEV +#undef COMPLIANT_DEV +#undef USUAL_DEV + + +/* + * The table of devices to ignore + */ +struct ignore_entry { + u16 vid, pid, bcdmin, bcdmax; +}; + +#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{ \ + .vid = id_vendor, \ + .pid = id_product, \ + .bcdmin = bcdDeviceMin, \ + .bcdmax = bcdDeviceMax, \ +} + +static struct ignore_entry ignore_ids[] = { + { } /* Terminating entry */ +}; + +#undef UNUSUAL_DEV + + +/* Return an error if a device is in the ignore_ids list */ +int usb_usual_ignore_device(struct usb_interface *intf) +{ + struct usb_device *udev; + unsigned vid, pid, bcd; + struct ignore_entry *p; + + udev = interface_to_usbdev(intf); + vid = le16_to_cpu(udev->descriptor.idVendor); + pid = le16_to_cpu(udev->descriptor.idProduct); + bcd = le16_to_cpu(udev->descriptor.bcdDevice); + + for (p = ignore_ids; p->vid; ++p) { + if (p->vid == vid && p->pid == pid && + p->bcdmin <= bcd && p->bcdmax >= bcd) + return -ENXIO; + } + return 0; +} +EXPORT_SYMBOL_GPL(usb_usual_ignore_device); -- cgit v1.1 From 0ff71883b2d60136430458413c135d545c69b0c4 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 12 Feb 2009 14:47:49 -0500 Subject: usb-storage: make sddr09 a separate module This patch (as1207) converts usb-storage's sddr09 subdriver into a separate module. An unexpected complication arises because of DPCM devices, in which one LUN uses the sddr09 transport and one uses the standard CB transport. Since these devices can be used even when USB_STORAGE_SDDR09 isn't configured, their entries in unusual_devs.h require special treatment. If SDDR09 isn't configured then the entries remain in unusual_devs.h; if it is then the entries are present in unusual_sddr09.h instead. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/Kconfig | 4 +- drivers/usb/storage/Makefile | 5 +- drivers/usb/storage/sddr09.c | 107 +++++++++++++++++++++++++++++++++-- drivers/usb/storage/sddr09.h | 38 ------------- drivers/usb/storage/unusual_devs.h | 50 +++------------- drivers/usb/storage/unusual_sddr09.h | 56 ++++++++++++++++++ drivers/usb/storage/usb.c | 21 ------- drivers/usb/storage/usual-tables.c | 1 + 8 files changed, 174 insertions(+), 108 deletions(-) delete mode 100644 drivers/usb/storage/sddr09.h create mode 100644 drivers/usb/storage/unusual_sddr09.h (limited to 'drivers/usb') diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index 5c36756..7be8899 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -83,13 +83,15 @@ config USB_STORAGE_USBAT - Sandisk ImageMate SDDR-05b config USB_STORAGE_SDDR09 - bool "SanDisk SDDR-09 (and other SmartMedia, including DPCM) support" + tristate "SanDisk SDDR-09 (and other SmartMedia, including DPCM) support" depends on USB_STORAGE help Say Y here to include additional code to support the Sandisk SDDR-09 SmartMedia reader in the USB Mass Storage driver. Also works for the Microtech Zio! CompactFlash/SmartMedia reader. + If this driver is compiled as a module, it will be named ums-sddr09. + config USB_STORAGE_SDDR55 bool "SanDisk SDDR-55 SmartMedia support" depends on USB_STORAGE diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile index a9e475e..a52740a 100644 --- a/drivers/usb/storage/Makefile +++ b/drivers/usb/storage/Makefile @@ -11,7 +11,6 @@ obj-$(CONFIG_USB_STORAGE) += usb-storage.o usb-storage-obj-$(CONFIG_USB_STORAGE_DEBUG) += debug.o usb-storage-obj-$(CONFIG_USB_STORAGE_USBAT) += shuttle_usbat.o -usb-storage-obj-$(CONFIG_USB_STORAGE_SDDR09) += sddr09.o usb-storage-obj-$(CONFIG_USB_STORAGE_SDDR55) += sddr55.o usb-storage-obj-$(CONFIG_USB_STORAGE_FREECOM) += freecom.o usb-storage-obj-$(CONFIG_USB_STORAGE_ISD200) += isd200.o @@ -30,3 +29,7 @@ ifeq ($(CONFIG_USB_LIBUSUAL),) else obj-$(CONFIG_USB) += libusual.o usual-tables.o endif + +obj-$(CONFIG_USB_STORAGE_SDDR09) += ums-sddr09.o + +ums-sddr09-objs := sddr09.o diff --git a/drivers/usb/storage/sddr09.c b/drivers/usb/storage/sddr09.c index b667c7d..170ad86 100644 --- a/drivers/usb/storage/sddr09.c +++ b/drivers/usb/storage/sddr09.c @@ -41,6 +41,7 @@ */ #include +#include #include #include @@ -51,7 +52,50 @@ #include "transport.h" #include "protocol.h" #include "debug.h" -#include "sddr09.h" + + +static int usb_stor_sddr09_dpcm_init(struct us_data *us); +static int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us); +static int usb_stor_sddr09_init(struct us_data *us); + + +/* + * The table of devices + */ +#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ + .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + +struct usb_device_id sddr09_usb_ids[] = { +# include "unusual_sddr09.h" + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, sddr09_usb_ids); + +#undef UNUSUAL_DEV + +/* + * The flags table + */ +#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ + vendor_name, product_name, use_protocol, use_transport, \ + init_function, Flags) \ +{ \ + .vendorName = vendor_name, \ + .productName = product_name, \ + .useProtocol = use_protocol, \ + .useTransport = use_transport, \ + .initFunction = init_function, \ +} + +static struct us_unusual_dev sddr09_unusual_dev_list[] = { +# include "unusual_sddr09.h" + { } /* Terminating entry */ +}; + +#undef UNUSUAL_DEV #define short_pack(lsb,msb) ( ((u16)(lsb)) | ( ((u16)(msb))<<8 ) ) @@ -1406,7 +1450,7 @@ sddr09_common_init(struct us_data *us) { * unusual devices list but called from here then LUN 0 of the combo reader * is not recognized. But I do not know what precisely these calls do. */ -int +static int usb_stor_sddr09_dpcm_init(struct us_data *us) { int result; unsigned char *data = us->iobuf; @@ -1456,7 +1500,7 @@ usb_stor_sddr09_dpcm_init(struct us_data *us) { /* * Transport for the Microtech DPCM-USB */ -int dpcm_transport(struct scsi_cmnd *srb, struct us_data *us) +static int dpcm_transport(struct scsi_cmnd *srb, struct us_data *us) { int ret; @@ -1498,7 +1542,7 @@ int dpcm_transport(struct scsi_cmnd *srb, struct us_data *us) /* * Transport for the Sandisk SDDR-09 */ -int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us) +static int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us) { static unsigned char sensekey = 0, sensecode = 0; static unsigned char havefakesense = 0; @@ -1697,7 +1741,60 @@ int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us) /* * Initialization routine for the sddr09 subdriver */ -int +static int usb_stor_sddr09_init(struct us_data *us) { return sddr09_common_init(us); } + +static int sddr09_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct us_data *us; + int result; + + result = usb_stor_probe1(&us, intf, id, + (id - sddr09_usb_ids) + sddr09_unusual_dev_list); + if (result) + return result; + + if (us->protocol == US_PR_DPCM_USB) { + us->transport_name = "Control/Bulk-EUSB/SDDR09"; + us->transport = dpcm_transport; + us->transport_reset = usb_stor_CB_reset; + us->max_lun = 1; + } else { + us->transport_name = "EUSB/SDDR09"; + us->transport = sddr09_transport; + us->transport_reset = usb_stor_CB_reset; + us->max_lun = 0; + } + + result = usb_stor_probe2(us); + return result; +} + +static struct usb_driver sddr09_driver = { + .name = "ums-sddr09", + .probe = sddr09_probe, + .disconnect = usb_stor_disconnect, + .suspend = usb_stor_suspend, + .resume = usb_stor_resume, + .reset_resume = usb_stor_reset_resume, + .pre_reset = usb_stor_pre_reset, + .post_reset = usb_stor_post_reset, + .id_table = sddr09_usb_ids, + .soft_unbind = 1, +}; + +static int __init sddr09_init(void) +{ + return usb_register(&sddr09_driver); +} + +static void __exit sddr09_exit(void) +{ + usb_deregister(&sddr09_driver); +} + +module_init(sddr09_init); +module_exit(sddr09_exit); diff --git a/drivers/usb/storage/sddr09.h b/drivers/usb/storage/sddr09.h deleted file mode 100644 index b701172..0000000 --- a/drivers/usb/storage/sddr09.h +++ /dev/null @@ -1,38 +0,0 @@ -/* Driver for SanDisk SDDR-09 SmartMedia reader - * Header File - * - * Current development and maintenance by: - * (c) 2000 Robert Baruch (autophile@dol.net) - * (c) 2002 Andries Brouwer (aeb@cwi.nl) - * - * See sddr09.c for more explanation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2, or (at your option) any - * later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef _USB_SHUTTLE_EUSB_SDDR09_H -#define _USB_SHUTTLE_EUSB_SDDR09_H - -/* Sandisk SDDR-09 stuff */ - -extern int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us); -extern int usb_stor_sddr09_init(struct us_data *us); - -/* Microtech DPCM-USB stuff */ - -extern int dpcm_transport(struct scsi_cmnd *srb, struct us_data *us); -extern int usb_stor_sddr09_dpcm_init(struct us_data *us); - -#endif diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index cfde74a..1fe7062 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -53,6 +53,11 @@ * as opposed to devices that do something strangely or wrongly. */ +#if !defined(CONFIG_USB_STORAGE_SDDR09) && \ + !defined(CONFIG_USB_STORAGE_SDDR09_MODULE) +#define NO_SDDR09 +#endif + /* patch submitted by Vivian Bregier */ UNUSUAL_DEV( 0x03eb, 0x2002, 0x0100, 0x0100, @@ -246,12 +251,7 @@ UNUSUAL_DEV( 0x0424, 0x0fdc, 0x0210, 0x0210, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_SINGLE_LUN ), -#ifdef CONFIG_USB_STORAGE_SDDR09 -UNUSUAL_DEV( 0x0436, 0x0005, 0x0100, 0x0100, - "Microtech", - "CameraMate (DPCM_USB)", - US_SC_SCSI, US_PR_DPCM_USB, NULL, 0 ), -#else +#ifdef NO_SDDR09 UNUSUAL_DEV( 0x0436, 0x0005, 0x0100, 0x0100, "Microtech", "CameraMate", @@ -467,20 +467,7 @@ UNUSUAL_DEV( 0x04e6, 0x0002, 0x0100, 0x0100, US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init, US_FL_SCM_MULT_TARG ), -#ifdef CONFIG_USB_STORAGE_SDDR09 -UNUSUAL_DEV( 0x04e6, 0x0003, 0x0000, 0x9999, - "Sandisk", - "ImageMate SDDR09", - US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init, - 0), - -/* This entry is from Andries.Brouwer@cwi.nl */ -UNUSUAL_DEV( 0x04e6, 0x0005, 0x0100, 0x0208, - "SCM Microsystems", - "eUSB SmartMedia / CompactFlash Adapter", - US_SC_SCSI, US_PR_DPCM_USB, usb_stor_sddr09_dpcm_init, - 0), -#else +#ifdef NO_SDDR09 UNUSUAL_DEV( 0x04e6, 0x0005, 0x0100, 0x0208, "SCM Microsystems", "eUSB CompactFlash Adapter", @@ -935,14 +922,6 @@ UNUSUAL_DEV( 0x0644, 0x0000, 0x0100, 0x0100, "Floppy Drive", US_SC_UFI, US_PR_CB, NULL, 0 ), -#ifdef CONFIG_USB_STORAGE_SDDR09 -UNUSUAL_DEV( 0x066b, 0x0105, 0x0100, 0x0100, - "Olympus", - "Camedia MAUSB-2", - US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init, - 0), -#endif - /* Reported by Darsen Lu */ UNUSUAL_DEV( 0x066f, 0x8000, 0x0001, 0x0001, "SigmaTel", @@ -1057,14 +1036,6 @@ UNUSUAL_DEV( 0x0781, 0x0100, 0x0100, 0x0100, US_SC_SCSI, US_PR_CB, NULL, US_FL_SINGLE_LUN ), -#ifdef CONFIG_USB_STORAGE_SDDR09 -UNUSUAL_DEV( 0x0781, 0x0200, 0x0000, 0x9999, - "Sandisk", - "ImageMate SDDR-09", - US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init, - 0), -#endif - #ifdef CONFIG_USB_STORAGE_FREECOM UNUSUAL_DEV( 0x07ab, 0xfc01, 0x0000, 0x9999, "Freecom", @@ -1091,12 +1062,7 @@ UNUSUAL_DEV( 0x07af, 0x0005, 0x0100, 0x0100, US_SC_DEVICE, US_PR_DEVICE, usb_stor_euscsi_init, US_FL_SCM_MULT_TARG ), -#ifdef CONFIG_USB_STORAGE_SDDR09 -UNUSUAL_DEV( 0x07af, 0x0006, 0x0100, 0x0100, - "Microtech", - "CameraMate (DPCM_USB)", - US_SC_SCSI, US_PR_DPCM_USB, NULL, 0 ), -#else +#ifdef NO_SDDR09 UNUSUAL_DEV( 0x07af, 0x0006, 0x0100, 0x0100, "Microtech", "CameraMate", diff --git a/drivers/usb/storage/unusual_sddr09.h b/drivers/usb/storage/unusual_sddr09.h new file mode 100644 index 0000000..50cab51 --- /dev/null +++ b/drivers/usb/storage/unusual_sddr09.h @@ -0,0 +1,56 @@ +/* Unusual Devices File for SanDisk SDDR-09 SmartMedia reader + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#if defined(CONFIG_USB_STORAGE_SDDR09) || \ + defined(CONFIG_USB_STORAGE_SDDR09_MODULE) + +UNUSUAL_DEV( 0x0436, 0x0005, 0x0100, 0x0100, + "Microtech", + "CameraMate (DPCM_USB)", + US_SC_SCSI, US_PR_DPCM_USB, NULL, 0), + +UNUSUAL_DEV( 0x04e6, 0x0003, 0x0000, 0x9999, + "Sandisk", + "ImageMate SDDR09", + US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init, + 0), + +/* This entry is from Andries.Brouwer@cwi.nl */ +UNUSUAL_DEV( 0x04e6, 0x0005, 0x0100, 0x0208, + "SCM Microsystems", + "eUSB SmartMedia / CompactFlash Adapter", + US_SC_SCSI, US_PR_DPCM_USB, usb_stor_sddr09_dpcm_init, + 0), + +UNUSUAL_DEV( 0x066b, 0x0105, 0x0100, 0x0100, + "Olympus", + "Camedia MAUSB-2", + US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init, + 0), + +UNUSUAL_DEV( 0x0781, 0x0200, 0x0000, 0x9999, + "Sandisk", + "ImageMate SDDR-09", + US_SC_SCSI, US_PR_EUSB_SDDR09, usb_stor_sddr09_init, + 0), + +UNUSUAL_DEV( 0x07af, 0x0006, 0x0100, 0x0100, + "Microtech", + "CameraMate (DPCM_USB)", + US_SC_SCSI, US_PR_DPCM_USB, NULL, 0), + +#endif /* defined(CONFIG_USB_STORAGE_SDDR09) || ... */ diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 490ea76..33cce41 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -69,9 +69,6 @@ #ifdef CONFIG_USB_STORAGE_USBAT #include "shuttle_usbat.h" #endif -#ifdef CONFIG_USB_STORAGE_SDDR09 -#include "sddr09.h" -#endif #ifdef CONFIG_USB_STORAGE_SDDR55 #include "sddr55.h" #endif @@ -631,15 +628,6 @@ static void get_transport(struct us_data *us) break; #endif -#ifdef CONFIG_USB_STORAGE_SDDR09 - case US_PR_EUSB_SDDR09: - us->transport_name = "EUSB/SDDR09"; - us->transport = sddr09_transport; - us->transport_reset = usb_stor_CB_reset; - us->max_lun = 0; - break; -#endif - #ifdef CONFIG_USB_STORAGE_SDDR55 case US_PR_SDDR55: us->transport_name = "SDDR55"; @@ -649,15 +637,6 @@ static void get_transport(struct us_data *us) break; #endif -#ifdef CONFIG_USB_STORAGE_DPCM - case US_PR_DPCM_USB: - us->transport_name = "Control/Bulk-EUSB/SDDR09"; - us->transport = dpcm_transport; - us->transport_reset = usb_stor_CB_reset; - us->max_lun = 1; - break; -#endif - #ifdef CONFIG_USB_STORAGE_FREECOM case US_PR_FREECOM: us->transport_name = "Freecom"; diff --git a/drivers/usb/storage/usual-tables.c b/drivers/usb/storage/usual-tables.c index 1924e32..f808c52 100644 --- a/drivers/usb/storage/usual-tables.c +++ b/drivers/usb/storage/usual-tables.c @@ -77,6 +77,7 @@ struct ignore_entry { } static struct ignore_entry ignore_ids[] = { +# include "unusual_sddr09.h" { } /* Terminating entry */ }; -- cgit v1.1 From 32d5493eb83a217c3b1eba4b98cd6d19864f71a8 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 12 Feb 2009 14:47:54 -0500 Subject: usb-storage: make isd200 a separate module This patch (as1208) converts usb-storage's isd200 subdriver into a separate module. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/Kconfig | 4 +- drivers/usb/storage/Makefile | 3 +- drivers/usb/storage/isd200.c | 94 ++++++++++++++++++++++++++++++++++-- drivers/usb/storage/isd200.h | 31 ------------ drivers/usb/storage/unusual_devs.h | 42 ---------------- drivers/usb/storage/unusual_isd200.h | 57 ++++++++++++++++++++++ drivers/usb/storage/usb.c | 10 ---- drivers/usb/storage/usual-tables.c | 1 + 8 files changed, 154 insertions(+), 88 deletions(-) delete mode 100644 drivers/usb/storage/isd200.h create mode 100644 drivers/usb/storage/unusual_isd200.h (limited to 'drivers/usb') diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index 7be8899..fc356a7 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -46,7 +46,7 @@ config USB_STORAGE_FREECOM Freecom has a web page at . config USB_STORAGE_ISD200 - bool "ISD-200 USB/ATA Bridge support" + tristate "ISD-200 USB/ATA Bridge support" depends on USB_STORAGE ---help--- Say Y here if you want to use USB Mass Store devices based @@ -61,6 +61,8 @@ config USB_STORAGE_ISD200 - CyQ've CQ8060A CDRW drive - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U) + If this driver is compiled as a module, it will be named ums-isd200. + config USB_STORAGE_USBAT bool "USBAT/USBAT02-based storage support" depends on USB_STORAGE diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile index a52740a..b47f94e 100644 --- a/drivers/usb/storage/Makefile +++ b/drivers/usb/storage/Makefile @@ -13,7 +13,6 @@ usb-storage-obj-$(CONFIG_USB_STORAGE_DEBUG) += debug.o usb-storage-obj-$(CONFIG_USB_STORAGE_USBAT) += shuttle_usbat.o usb-storage-obj-$(CONFIG_USB_STORAGE_SDDR55) += sddr55.o usb-storage-obj-$(CONFIG_USB_STORAGE_FREECOM) += freecom.o -usb-storage-obj-$(CONFIG_USB_STORAGE_ISD200) += isd200.o usb-storage-obj-$(CONFIG_USB_STORAGE_DATAFAB) += datafab.o usb-storage-obj-$(CONFIG_USB_STORAGE_JUMPSHOT) += jumpshot.o usb-storage-obj-$(CONFIG_USB_STORAGE_ALAUDA) += alauda.o @@ -30,6 +29,8 @@ else obj-$(CONFIG_USB) += libusual.o usual-tables.o endif +obj-$(CONFIG_USB_STORAGE_ISD200) += ums-isd200.o obj-$(CONFIG_USB_STORAGE_SDDR09) += ums-sddr09.o +ums-isd200-objs := isd200.o ums-sddr09-objs := sddr09.o diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c index 383abf2..df94300 100644 --- a/drivers/usb/storage/isd200.c +++ b/drivers/usb/storage/isd200.c @@ -44,6 +44,7 @@ #include #include +#include #include #include #include @@ -57,7 +58,50 @@ #include "protocol.h" #include "debug.h" #include "scsiglue.h" -#include "isd200.h" + + +static int isd200_Initialization(struct us_data *us); + + +/* + * The table of devices + */ +#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ + .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + +struct usb_device_id isd200_usb_ids[] = { +# include "unusual_isd200.h" + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, isd200_usb_ids); + +#undef UNUSUAL_DEV +#undef USUAL_DEV + +/* + * The flags table + */ +#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ + vendor_name, product_name, use_protocol, use_transport, \ + init_function, Flags) \ +{ \ + .vendorName = vendor_name, \ + .productName = product_name, \ + .useProtocol = use_protocol, \ + .useTransport = use_transport, \ + .initFunction = init_function, \ +} + +static struct us_unusual_dev isd200_unusual_dev_list[] = { +# include "unusual_isd200.h" + { } /* Terminating entry */ +}; + +#undef UNUSUAL_DEV +#undef USUAL_DEV /* Timeout defines (in Seconds) */ @@ -1518,7 +1562,7 @@ static int isd200_init_info(struct us_data *us) * Initialization for the ISD200 */ -int isd200_Initialization(struct us_data *us) +static int isd200_Initialization(struct us_data *us) { US_DEBUGP("ISD200 Initialization...\n"); @@ -1549,7 +1593,7 @@ int isd200_Initialization(struct us_data *us) * */ -void isd200_ata_command(struct scsi_cmnd *srb, struct us_data *us) +static void isd200_ata_command(struct scsi_cmnd *srb, struct us_data *us) { int sendToTransport = 1, orig_bufflen; union ata_cdb ataCdb; @@ -1570,3 +1614,47 @@ void isd200_ata_command(struct scsi_cmnd *srb, struct us_data *us) isd200_srb_set_bufflen(srb, orig_bufflen); } + +static int isd200_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct us_data *us; + int result; + + result = usb_stor_probe1(&us, intf, id, + (id - isd200_usb_ids) + isd200_unusual_dev_list); + if (result) + return result; + + us->protocol_name = "ISD200 ATA/ATAPI"; + us->proto_handler = isd200_ata_command; + + result = usb_stor_probe2(us); + return result; +} + +static struct usb_driver isd200_driver = { + .name = "ums-isd200", + .probe = isd200_probe, + .disconnect = usb_stor_disconnect, + .suspend = usb_stor_suspend, + .resume = usb_stor_resume, + .reset_resume = usb_stor_reset_resume, + .pre_reset = usb_stor_pre_reset, + .post_reset = usb_stor_post_reset, + .id_table = isd200_usb_ids, + .soft_unbind = 1, +}; + +static int __init isd200_init(void) +{ + return usb_register(&isd200_driver); +} + +static void __exit isd200_exit(void) +{ + usb_deregister(&isd200_driver); +} + +module_init(isd200_init); +module_exit(isd200_exit); diff --git a/drivers/usb/storage/isd200.h b/drivers/usb/storage/isd200.h deleted file mode 100644 index 0a35f4f..0000000 --- a/drivers/usb/storage/isd200.h +++ /dev/null @@ -1,31 +0,0 @@ -/* Header File for In-System Design, Inc. ISD200 ASIC - * - * First release - * - * Current development and maintenance by: - * (c) 2000 In-System Design, Inc. (support@in-system.com) - * - * See isd200.c for more information. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2, or (at your option) any - * later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef _USB_ISD200_H -#define _USB_ISD200_H - -extern void isd200_ata_command(struct scsi_cmnd *srb, struct us_data *us); -extern int isd200_Initialization(struct us_data *us); - -#endif diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 1fe7062..83ce1d3 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -632,14 +632,6 @@ UNUSUAL_DEV( 0x054c, 0x0025, 0x0100, 0x0100, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_SINGLE_LUN ), -#ifdef CONFIG_USB_STORAGE_ISD200 -UNUSUAL_DEV( 0x054c, 0x002b, 0x0100, 0x0110, - "Sony", - "Portable USB Harddrive V2", - US_SC_ISD200, US_PR_BULK, isd200_Initialization, - 0 ), -#endif - /* Submitted by Olaf Hering, SuSE Bugzilla #49049 */ UNUSUAL_DEV( 0x054c, 0x002c, 0x0501, 0x2000, "Sony", @@ -785,32 +777,6 @@ UNUSUAL_DEV( 0x05ab, 0x0060, 0x1104, 0x1110, US_SC_SCSI, US_PR_BULK, NULL, US_FL_NEED_OVERRIDE ), -#ifdef CONFIG_USB_STORAGE_ISD200 -UNUSUAL_DEV( 0x05ab, 0x0031, 0x0100, 0x0110, - "In-System", - "USB/IDE Bridge (ATA/ATAPI)", - US_SC_ISD200, US_PR_BULK, isd200_Initialization, - 0 ), - -UNUSUAL_DEV( 0x05ab, 0x0301, 0x0100, 0x0110, - "In-System", - "Portable USB Harddrive V2", - US_SC_ISD200, US_PR_BULK, isd200_Initialization, - 0 ), - -UNUSUAL_DEV( 0x05ab, 0x0351, 0x0100, 0x0110, - "In-System", - "Portable USB Harddrive V2", - US_SC_ISD200, US_PR_BULK, isd200_Initialization, - 0 ), - -UNUSUAL_DEV( 0x05ab, 0x5701, 0x0100, 0x0110, - "In-System", - "USB Storage Adapter V2", - US_SC_ISD200, US_PR_BULK, isd200_Initialization, - 0 ), -#endif - /* Submitted by Sven Anderson * There are at least four ProductIDs used for iPods, so I added 0x1202 and * 0x1204. They just need the US_FL_FIX_CAPACITY. As the bcdDevice appears @@ -1375,14 +1341,6 @@ UNUSUAL_DEV( 0x0bc2, 0x3010, 0x0000, 0x0000, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_SANE_SENSE ), -#ifdef CONFIG_USB_STORAGE_ISD200 -UNUSUAL_DEV( 0x0bf6, 0xa001, 0x0100, 0x0110, - "ATI", - "USB Cable 205", - US_SC_ISD200, US_PR_BULK, isd200_Initialization, - 0 ), -#endif - #ifdef CONFIG_USB_STORAGE_DATAFAB UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff, "Acomdata", diff --git a/drivers/usb/storage/unusual_isd200.h b/drivers/usb/storage/unusual_isd200.h new file mode 100644 index 0000000..0d99dde --- /dev/null +++ b/drivers/usb/storage/unusual_isd200.h @@ -0,0 +1,57 @@ +/* Unusual Devices File for In-System Design, Inc. ISD200 ASIC + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#if defined(CONFIG_USB_STORAGE_ISD200) || \ + defined(CONFIG_USB_STORAGE_ISD200_MODULE) + +UNUSUAL_DEV( 0x054c, 0x002b, 0x0100, 0x0110, + "Sony", + "Portable USB Harddrive V2", + US_SC_ISD200, US_PR_BULK, isd200_Initialization, + 0), + +UNUSUAL_DEV( 0x05ab, 0x0031, 0x0100, 0x0110, + "In-System", + "USB/IDE Bridge (ATA/ATAPI)", + US_SC_ISD200, US_PR_BULK, isd200_Initialization, + 0), + +UNUSUAL_DEV( 0x05ab, 0x0301, 0x0100, 0x0110, + "In-System", + "Portable USB Harddrive V2", + US_SC_ISD200, US_PR_BULK, isd200_Initialization, + 0), + +UNUSUAL_DEV( 0x05ab, 0x0351, 0x0100, 0x0110, + "In-System", + "Portable USB Harddrive V2", + US_SC_ISD200, US_PR_BULK, isd200_Initialization, + 0), + +UNUSUAL_DEV( 0x05ab, 0x5701, 0x0100, 0x0110, + "In-System", + "USB Storage Adapter V2", + US_SC_ISD200, US_PR_BULK, isd200_Initialization, + 0), + +UNUSUAL_DEV( 0x0bf6, 0xa001, 0x0100, 0x0110, + "ATI", + "USB Cable 205", + US_SC_ISD200, US_PR_BULK, isd200_Initialization, + 0), + +#endif /* defined(CONFIG_USB_STORAGE_ISD200) || ... */ diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 33cce41..e65cbba 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -75,9 +75,6 @@ #ifdef CONFIG_USB_STORAGE_FREECOM #include "freecom.h" #endif -#ifdef CONFIG_USB_STORAGE_ISD200 -#include "isd200.h" -#endif #ifdef CONFIG_USB_STORAGE_DATAFAB #include "datafab.h" #endif @@ -721,13 +718,6 @@ static void get_protocol(struct us_data *us) us->proto_handler = usb_stor_ufi_command; break; -#ifdef CONFIG_USB_STORAGE_ISD200 - case US_SC_ISD200: - us->protocol_name = "ISD200 ATA/ATAPI"; - us->proto_handler = isd200_ata_command; - break; -#endif - #ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB case US_SC_CYP_ATACB: us->protocol_name = "Transparent SCSI with Cypress ATACB"; diff --git a/drivers/usb/storage/usual-tables.c b/drivers/usb/storage/usual-tables.c index f808c52..61ebddcc 100644 --- a/drivers/usb/storage/usual-tables.c +++ b/drivers/usb/storage/usual-tables.c @@ -77,6 +77,7 @@ struct ignore_entry { } static struct ignore_entry ignore_ids[] = { +# include "unusual_isd200.h" # include "unusual_sddr09.h" { } /* Terminating entry */ }; -- cgit v1.1 From 70fcc0050733a7cd1b452cfa3de3a9b376412565 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 12 Feb 2009 14:47:59 -0500 Subject: usb-storage: make sddr55 a separate module This patch (as1209) converts usb-storage's sddr55 subdriver into a separate module. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/Kconfig | 4 +- drivers/usb/storage/Makefile | 3 +- drivers/usb/storage/sddr55.c | 92 ++++++++++++++++++++++++++++++++++-- drivers/usb/storage/sddr55.h | 32 ------------- drivers/usb/storage/unusual_devs.h | 32 ------------- drivers/usb/storage/unusual_sddr55.h | 44 +++++++++++++++++ drivers/usb/storage/usb.c | 12 ----- drivers/usb/storage/usual-tables.c | 1 + 8 files changed, 139 insertions(+), 81 deletions(-) delete mode 100644 drivers/usb/storage/sddr55.h create mode 100644 drivers/usb/storage/unusual_sddr55.h (limited to 'drivers/usb') diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index fc356a7..e6cc245 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -95,12 +95,14 @@ config USB_STORAGE_SDDR09 If this driver is compiled as a module, it will be named ums-sddr09. config USB_STORAGE_SDDR55 - bool "SanDisk SDDR-55 SmartMedia support" + tristate "SanDisk SDDR-55 SmartMedia support" depends on USB_STORAGE help Say Y here to include additional code to support the Sandisk SDDR-55 SmartMedia reader in the USB Mass Storage driver. + If this driver is compiled as a module, it will be named ums-sddr55. + config USB_STORAGE_JUMPSHOT bool "Lexar Jumpshot Compact Flash Reader" depends on USB_STORAGE diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile index b47f94e..5fb7847 100644 --- a/drivers/usb/storage/Makefile +++ b/drivers/usb/storage/Makefile @@ -11,7 +11,6 @@ obj-$(CONFIG_USB_STORAGE) += usb-storage.o usb-storage-obj-$(CONFIG_USB_STORAGE_DEBUG) += debug.o usb-storage-obj-$(CONFIG_USB_STORAGE_USBAT) += shuttle_usbat.o -usb-storage-obj-$(CONFIG_USB_STORAGE_SDDR55) += sddr55.o usb-storage-obj-$(CONFIG_USB_STORAGE_FREECOM) += freecom.o usb-storage-obj-$(CONFIG_USB_STORAGE_DATAFAB) += datafab.o usb-storage-obj-$(CONFIG_USB_STORAGE_JUMPSHOT) += jumpshot.o @@ -31,6 +30,8 @@ endif obj-$(CONFIG_USB_STORAGE_ISD200) += ums-isd200.o obj-$(CONFIG_USB_STORAGE_SDDR09) += ums-sddr09.o +obj-$(CONFIG_USB_STORAGE_SDDR55) += ums-sddr55.o ums-isd200-objs := isd200.o ums-sddr09-objs := sddr09.o +ums-sddr55-objs := sddr55.o diff --git a/drivers/usb/storage/sddr55.c b/drivers/usb/storage/sddr55.c index 5a0106b..e97716f 100644 --- a/drivers/usb/storage/sddr55.c +++ b/drivers/usb/storage/sddr55.c @@ -24,6 +24,7 @@ #include #include +#include #include #include @@ -33,7 +34,45 @@ #include "transport.h" #include "protocol.h" #include "debug.h" -#include "sddr55.h" + + +/* + * The table of devices + */ +#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ + .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + +struct usb_device_id sddr55_usb_ids[] = { +# include "unusual_sddr55.h" + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, sddr55_usb_ids); + +#undef UNUSUAL_DEV + +/* + * The flags table + */ +#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ + vendor_name, product_name, use_protocol, use_transport, \ + init_function, Flags) \ +{ \ + .vendorName = vendor_name, \ + .productName = product_name, \ + .useProtocol = use_protocol, \ + .useTransport = use_transport, \ + .initFunction = init_function, \ +} + +static struct us_unusual_dev sddr55_unusual_dev_list[] = { +# include "unusual_sddr55.h" + { } /* Terminating entry */ +}; + +#undef UNUSUAL_DEV #define short_pack(lsb,msb) ( ((u16)(lsb)) | ( ((u16)(msb))<<8 ) ) @@ -513,7 +552,8 @@ static int sddr55_read_deviceID(struct us_data *us, } -int sddr55_reset(struct us_data *us) { +static int sddr55_reset(struct us_data *us) +{ return 0; } @@ -734,7 +774,7 @@ static void sddr55_card_info_destructor(void *extra) { /* * Transport for the Sandisk SDDR-55 */ -int sddr55_transport(struct scsi_cmnd *srb, struct us_data *us) +static int sddr55_transport(struct scsi_cmnd *srb, struct us_data *us) { int result; static unsigned char inquiry_response[8] = { @@ -931,3 +971,49 @@ int sddr55_transport(struct scsi_cmnd *srb, struct us_data *us) return USB_STOR_TRANSPORT_FAILED; // FIXME: sense buffer? } + +static int sddr55_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct us_data *us; + int result; + + result = usb_stor_probe1(&us, intf, id, + (id - sddr55_usb_ids) + sddr55_unusual_dev_list); + if (result) + return result; + + us->transport_name = "SDDR55"; + us->transport = sddr55_transport; + us->transport_reset = sddr55_reset; + us->max_lun = 0; + + result = usb_stor_probe2(us); + return result; +} + +static struct usb_driver sddr55_driver = { + .name = "ums-sddr55", + .probe = sddr55_probe, + .disconnect = usb_stor_disconnect, + .suspend = usb_stor_suspend, + .resume = usb_stor_resume, + .reset_resume = usb_stor_reset_resume, + .pre_reset = usb_stor_pre_reset, + .post_reset = usb_stor_post_reset, + .id_table = sddr55_usb_ids, + .soft_unbind = 1, +}; + +static int __init sddr55_init(void) +{ + return usb_register(&sddr55_driver); +} + +static void __exit sddr55_exit(void) +{ + usb_deregister(&sddr55_driver); +} + +module_init(sddr55_init); +module_exit(sddr55_exit); diff --git a/drivers/usb/storage/sddr55.h b/drivers/usb/storage/sddr55.h deleted file mode 100644 index a815a04..0000000 --- a/drivers/usb/storage/sddr55.h +++ /dev/null @@ -1,32 +0,0 @@ -/* Driver for SanDisk SDDR-55 SmartMedia reader - * Header File - * - * Current development and maintenance by: - * (c) 2002 Simon Munton - * - * See sddr55.c for more explanation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2, or (at your option) any - * later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef _USB_SHUTTLE_EUSB_SDDR55_H -#define _USB_SHUTTLE_EUSB_SDDR55_H - -/* Sandisk SDDR-55 stuff */ - -extern int sddr55_transport(struct scsi_cmnd *srb, struct us_data *us); -extern int sddr55_reset(struct us_data *us); - -#endif diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 83ce1d3..50034e1 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1098,15 +1098,6 @@ UNUSUAL_DEV( 0x07c4, 0xa006, 0x0000, 0xffff, US_SC_SCSI, US_PR_DATAFAB, NULL, 0 ), #endif - -#ifdef CONFIG_USB_STORAGE_SDDR55 -/* Contributed by Peter Waechtler */ -UNUSUAL_DEV( 0x07c4, 0xa103, 0x0000, 0x9999, - "Datafab", - "MDSM-B reader", - US_SC_SCSI, US_PR_SDDR55, NULL, - US_FL_FIX_INQUIRY ), -#endif #ifdef CONFIG_USB_STORAGE_DATAFAB /* Submitted by Olaf Hering */ @@ -1116,14 +1107,6 @@ UNUSUAL_DEV( 0x07c4, 0xa109, 0x0000, 0xffff, US_SC_SCSI, US_PR_DATAFAB, NULL, 0 ), #endif -#ifdef CONFIG_USB_STORAGE_SDDR55 -/* SM part - aeb */ -UNUSUAL_DEV( 0x07c4, 0xa109, 0x0000, 0xffff, - "Datafab Systems, Inc.", - "USB to CF + SM Combo (LC1)", - US_SC_SCSI, US_PR_SDDR55, NULL, - US_FL_SINGLE_LUN ), -#endif #ifdef CONFIG_USB_STORAGE_DATAFAB /* Reported by Felix Moeller @@ -1348,13 +1331,6 @@ UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff, US_SC_SCSI, US_PR_DATAFAB, NULL, US_FL_SINGLE_LUN ), #endif -#ifdef CONFIG_USB_STORAGE_SDDR55 -UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff, - "Acomdata", - "SM", - US_SC_SCSI, US_PR_SDDR55, NULL, - US_FL_SINGLE_LUN ), -#endif UNUSUAL_DEV( 0x0d49, 0x7310, 0x0000, 0x9999, "Maxtor", @@ -2041,14 +2017,6 @@ UNUSUAL_DEV( 0x4146, 0xba01, 0x0100, 0x0100, "Micro Mini 1GB", US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ), -#ifdef CONFIG_USB_STORAGE_SDDR55 -UNUSUAL_DEV( 0x55aa, 0xa103, 0x0000, 0x9999, - "Sandisk", - "ImageMate SDDR55", - US_SC_SCSI, US_PR_SDDR55, NULL, - US_FL_SINGLE_LUN), -#endif - /* Reported by Andrew Simmons */ UNUSUAL_DEV( 0xed06, 0x4500, 0x0001, 0x0001, "DataStor", diff --git a/drivers/usb/storage/unusual_sddr55.h b/drivers/usb/storage/unusual_sddr55.h new file mode 100644 index 0000000..ae81ef7 --- /dev/null +++ b/drivers/usb/storage/unusual_sddr55.h @@ -0,0 +1,44 @@ +/* Unusual Devices File for SanDisk SDDR-55 SmartMedia reader + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#if defined(CONFIG_USB_STORAGE_SDDR55) || \ + defined(CONFIG_USB_STORAGE_SDDR55_MODULE) + +/* Contributed by Peter Waechtler */ +UNUSUAL_DEV( 0x07c4, 0xa103, 0x0000, 0x9999, + "Datafab", + "MDSM-B reader", + US_SC_SCSI, US_PR_SDDR55, NULL, + US_FL_FIX_INQUIRY), + +/* SM part - aeb */ +UNUSUAL_DEV( 0x07c4, 0xa109, 0x0000, 0xffff, + "Datafab Systems, Inc.", + "USB to CF + SM Combo (LC1)", + US_SC_SCSI, US_PR_SDDR55, NULL, 0), + +UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff, + "Acomdata", + "SM", + US_SC_SCSI, US_PR_SDDR55, NULL, 0), + +UNUSUAL_DEV( 0x55aa, 0xa103, 0x0000, 0x9999, + "Sandisk", + "ImageMate SDDR55", + US_SC_SCSI, US_PR_SDDR55, NULL, 0), + +#endif /* defined(CONFIG_USB_STORAGE_SDDR55) || ... */ diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index e65cbba..238f271 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -69,9 +69,6 @@ #ifdef CONFIG_USB_STORAGE_USBAT #include "shuttle_usbat.h" #endif -#ifdef CONFIG_USB_STORAGE_SDDR55 -#include "sddr55.h" -#endif #ifdef CONFIG_USB_STORAGE_FREECOM #include "freecom.h" #endif @@ -625,15 +622,6 @@ static void get_transport(struct us_data *us) break; #endif -#ifdef CONFIG_USB_STORAGE_SDDR55 - case US_PR_SDDR55: - us->transport_name = "SDDR55"; - us->transport = sddr55_transport; - us->transport_reset = sddr55_reset; - us->max_lun = 0; - break; -#endif - #ifdef CONFIG_USB_STORAGE_FREECOM case US_PR_FREECOM: us->transport_name = "Freecom"; diff --git a/drivers/usb/storage/usual-tables.c b/drivers/usb/storage/usual-tables.c index 61ebddcc..5f2703f 100644 --- a/drivers/usb/storage/usual-tables.c +++ b/drivers/usb/storage/usual-tables.c @@ -79,6 +79,7 @@ struct ignore_entry { static struct ignore_entry ignore_ids[] = { # include "unusual_isd200.h" # include "unusual_sddr09.h" +# include "unusual_sddr55.h" { } /* Terminating entry */ }; -- cgit v1.1 From fcdb51401f7f695b7fb782721b2e33372c5a06ce Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 12 Feb 2009 14:48:04 -0500 Subject: usb-storage: make cypress_atacb a separate module This patch (as1210) converts usb-storage's cypress_atacb subdriver into a separate module. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/Kconfig | 4 +- drivers/usb/storage/Makefile | 3 +- drivers/usb/storage/cypress_atacb.c | 88 ++++++++++++++++++++++++++++++++++- drivers/usb/storage/cypress_atacb.h | 25 ---------- drivers/usb/storage/unusual_cypress.h | 34 ++++++++++++++ drivers/usb/storage/unusual_devs.h | 16 ------- drivers/usb/storage/usb.c | 11 ----- drivers/usb/storage/usual-tables.c | 1 + 8 files changed, 127 insertions(+), 55 deletions(-) delete mode 100644 drivers/usb/storage/cypress_atacb.h create mode 100644 drivers/usb/storage/unusual_cypress.h (limited to 'drivers/usb') diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index e6cc245..2c73fa9 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -146,7 +146,7 @@ config USB_STORAGE_KARMA operation. config USB_STORAGE_CYPRESS_ATACB - bool "SAT emulation on Cypress USB/ATA Bridge with ATACB" + tristate "SAT emulation on Cypress USB/ATA Bridge with ATACB" depends on USB_STORAGE ---help--- Say Y here if you want to use SAT (ata pass through) on devices based @@ -156,6 +156,8 @@ config USB_STORAGE_CYPRESS_ATACB If you say no here your device will still work with the standard usb mass storage class. + If this driver is compiled as a module, it will be named ums-cypress. + config USB_LIBUSUAL bool "The shared table of common (or usual) storage devices" depends on USB diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile index 5fb7847..0650f02 100644 --- a/drivers/usb/storage/Makefile +++ b/drivers/usb/storage/Makefile @@ -17,7 +17,6 @@ usb-storage-obj-$(CONFIG_USB_STORAGE_JUMPSHOT) += jumpshot.o usb-storage-obj-$(CONFIG_USB_STORAGE_ALAUDA) += alauda.o usb-storage-obj-$(CONFIG_USB_STORAGE_ONETOUCH) += onetouch.o usb-storage-obj-$(CONFIG_USB_STORAGE_KARMA) += karma.o -usb-storage-obj-$(CONFIG_USB_STORAGE_CYPRESS_ATACB) += cypress_atacb.o usb-storage-objs := scsiglue.o protocol.o transport.o usb.o \ initializers.o sierra_ms.o option_ms.o $(usb-storage-obj-y) @@ -28,10 +27,12 @@ else obj-$(CONFIG_USB) += libusual.o usual-tables.o endif +obj-$(CONFIG_USB_STORAGE_CYPRESS_ATACB) += ums-cypress.o obj-$(CONFIG_USB_STORAGE_ISD200) += ums-isd200.o obj-$(CONFIG_USB_STORAGE_SDDR09) += ums-sddr09.o obj-$(CONFIG_USB_STORAGE_SDDR55) += ums-sddr55.o +ums-cypress-objs := cypress_atacb.o ums-isd200-objs := isd200.o ums-sddr09-objs := sddr09.o ums-sddr55-objs := sddr55.o diff --git a/drivers/usb/storage/cypress_atacb.c b/drivers/usb/storage/cypress_atacb.c index 9466a99..19306f7b 100644 --- a/drivers/usb/storage/cypress_atacb.c +++ b/drivers/usb/storage/cypress_atacb.c @@ -19,6 +19,7 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include #include #include #include @@ -29,6 +30,46 @@ #include "scsiglue.h" #include "debug.h" + +/* + * The table of devices + */ +#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ + .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + +struct usb_device_id cypress_usb_ids[] = { +# include "unusual_cypress.h" + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, cypress_usb_ids); + +#undef UNUSUAL_DEV + +/* + * The flags table + */ +#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ + vendor_name, product_name, use_protocol, use_transport, \ + init_function, Flags) \ +{ \ + .vendorName = vendor_name, \ + .productName = product_name, \ + .useProtocol = use_protocol, \ + .useTransport = use_transport, \ + .initFunction = init_function, \ +} + +static struct us_unusual_dev cypress_unusual_dev_list[] = { +# include "unusual_cypress.h" + { } /* Terminating entry */ +}; + +#undef UNUSUAL_DEV + + /* * ATACB is a protocol used on cypress usb<->ata bridge to * send raw ATA command over mass storage @@ -36,7 +77,7 @@ * More info that be found on cy7c68310_8.pdf and cy7c68300c_8.pdf * datasheet from cypress.com. */ -void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us) +static void cypress_atacb_passthrough(struct scsi_cmnd *srb, struct us_data *us) { unsigned char save_cmnd[MAX_COMMAND_SIZE]; @@ -197,3 +238,48 @@ end: if (srb->cmnd[0] == ATA_12) srb->cmd_len = 12; } + + +static int cypress_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct us_data *us; + int result; + + result = usb_stor_probe1(&us, intf, id, + (id - cypress_usb_ids) + cypress_unusual_dev_list); + if (result) + return result; + + us->protocol_name = "Transparent SCSI with Cypress ATACB"; + us->proto_handler = cypress_atacb_passthrough; + + result = usb_stor_probe2(us); + return result; +} + +static struct usb_driver cypress_driver = { + .name = "ums-cypress", + .probe = cypress_probe, + .disconnect = usb_stor_disconnect, + .suspend = usb_stor_suspend, + .resume = usb_stor_resume, + .reset_resume = usb_stor_reset_resume, + .pre_reset = usb_stor_pre_reset, + .post_reset = usb_stor_post_reset, + .id_table = cypress_usb_ids, + .soft_unbind = 1, +}; + +static int __init cypress_init(void) +{ + return usb_register(&cypress_driver); +} + +static void __exit cypress_exit(void) +{ + usb_deregister(&cypress_driver); +} + +module_init(cypress_init); +module_exit(cypress_exit); diff --git a/drivers/usb/storage/cypress_atacb.h b/drivers/usb/storage/cypress_atacb.h deleted file mode 100644 index fbada89..0000000 --- a/drivers/usb/storage/cypress_atacb.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * Support for emulating SAT (ata pass through) on devices based - * on the Cypress USB/ATA bridge supporting ATACB. - * - * Copyright (c) 2008 Matthieu Castet (castet.matthieu@free.fr) - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2, or (at your option) any - * later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef _CYPRESS_ATACB_H_ -#define _CYPRESS_ATACB_H_ -extern void cypress_atacb_passthrough(struct scsi_cmnd*, struct us_data*); -#endif diff --git a/drivers/usb/storage/unusual_cypress.h b/drivers/usb/storage/unusual_cypress.h new file mode 100644 index 0000000..44be6d7 --- /dev/null +++ b/drivers/usb/storage/unusual_cypress.h @@ -0,0 +1,34 @@ +/* Unusual Devices File for devices based on the Cypress USB/ATA bridge + * with support for ATACB + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#if defined(CONFIG_USB_STORAGE_CYPRESS_ATACB) || \ + defined(CONFIG_USB_STORAGE_CYPRESS_ATACB_MODULE) + +/* CY7C68300 : support atacb */ +UNUSUAL_DEV( 0x04b4, 0x6830, 0x0000, 0x9999, + "Cypress", + "Cypress AT2LP", + US_SC_CYP_ATACB, US_PR_DEVICE, NULL, 0), + +/* CY7C68310 : support atacb and atacb2 */ +UNUSUAL_DEV( 0x04b4, 0x6831, 0x0000, 0x9999, + "Cypress", + "Cypress ISD-300LP", + US_SC_CYP_ATACB, US_PR_DEVICE, NULL, 0), + +#endif /* defined(CONFIG_USB_STORAGE_CYPRESS_ATACB) || ... */ diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 50034e1..eff97aed 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -375,22 +375,6 @@ UNUSUAL_DEV( 0x04b3, 0x4001, 0x0110, 0x0110, US_SC_DEVICE, US_PR_CB, NULL, US_FL_MAX_SECTORS_MIN), -#ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB -/* CY7C68300 : support atacb */ -UNUSUAL_DEV( 0x04b4, 0x6830, 0x0000, 0x9999, - "Cypress", - "Cypress AT2LP", - US_SC_CYP_ATACB, US_PR_DEVICE, NULL, - 0), - -/* CY7C68310 : support atacb and atacb2 */ -UNUSUAL_DEV( 0x04b4, 0x6831, 0x0000, 0x9999, - "Cypress", - "Cypress ISD-300LP", - US_SC_CYP_ATACB, US_PR_DEVICE, NULL, - 0), -#endif - /* Reported by Simon Levitt * This entry needs Sub and Proto fields */ UNUSUAL_DEV( 0x04b8, 0x0601, 0x0100, 0x0100, diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 238f271..241e194 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -87,9 +87,6 @@ #ifdef CONFIG_USB_STORAGE_KARMA #include "karma.h" #endif -#ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB -#include "cypress_atacb.h" -#endif #include "sierra_ms.h" #include "option_ms.h" @@ -705,14 +702,6 @@ static void get_protocol(struct us_data *us) us->protocol_name = "Uniform Floppy Interface (UFI)"; us->proto_handler = usb_stor_ufi_command; break; - -#ifdef CONFIG_USB_STORAGE_CYPRESS_ATACB - case US_SC_CYP_ATACB: - us->protocol_name = "Transparent SCSI with Cypress ATACB"; - us->proto_handler = cypress_atacb_passthrough; - break; -#endif - } } diff --git a/drivers/usb/storage/usual-tables.c b/drivers/usb/storage/usual-tables.c index 5f2703f..be461ee 100644 --- a/drivers/usb/storage/usual-tables.c +++ b/drivers/usb/storage/usual-tables.c @@ -77,6 +77,7 @@ struct ignore_entry { } static struct ignore_entry ignore_ids[] = { +# include "unusual_cypress.h" # include "unusual_isd200.h" # include "unusual_sddr09.h" # include "unusual_sddr55.h" -- cgit v1.1 From 26d6818f19d0ab018f28a20d699511c1efdf508b Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 12 Feb 2009 14:48:08 -0500 Subject: usb-storage: make shuttle_usbat a separate module This patch (as1211) converts usb-storage's shuttle_usbat subdriver into a separate module. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/Kconfig | 4 +- drivers/usb/storage/Makefile | 3 +- drivers/usb/storage/shuttle_usbat.c | 199 ++++++++++++++++++++++++++++++++---- drivers/usb/storage/shuttle_usbat.h | 123 ---------------------- drivers/usb/storage/unusual_devs.h | 28 ----- drivers/usb/storage/unusual_usbat.h | 43 ++++++++ drivers/usb/storage/usb.c | 12 --- drivers/usb/storage/usual-tables.c | 1 + 8 files changed, 227 insertions(+), 186 deletions(-) delete mode 100644 drivers/usb/storage/shuttle_usbat.h create mode 100644 drivers/usb/storage/unusual_usbat.h (limited to 'drivers/usb') diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index 2c73fa9..44c6b19 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -64,7 +64,7 @@ config USB_STORAGE_ISD200 If this driver is compiled as a module, it will be named ums-isd200. config USB_STORAGE_USBAT - bool "USBAT/USBAT02-based storage support" + tristate "USBAT/USBAT02-based storage support" depends on USB_STORAGE help Say Y here to include additional code to support storage devices @@ -84,6 +84,8 @@ config USB_STORAGE_USBAT - RCA LYRA MP3 portable - Sandisk ImageMate SDDR-05b + If this driver is compiled as a module, it will be named ums-usbat. + config USB_STORAGE_SDDR09 tristate "SanDisk SDDR-09 (and other SmartMedia, including DPCM) support" depends on USB_STORAGE diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile index 0650f02..2387368 100644 --- a/drivers/usb/storage/Makefile +++ b/drivers/usb/storage/Makefile @@ -10,7 +10,6 @@ EXTRA_CFLAGS := -Idrivers/scsi obj-$(CONFIG_USB_STORAGE) += usb-storage.o usb-storage-obj-$(CONFIG_USB_STORAGE_DEBUG) += debug.o -usb-storage-obj-$(CONFIG_USB_STORAGE_USBAT) += shuttle_usbat.o usb-storage-obj-$(CONFIG_USB_STORAGE_FREECOM) += freecom.o usb-storage-obj-$(CONFIG_USB_STORAGE_DATAFAB) += datafab.o usb-storage-obj-$(CONFIG_USB_STORAGE_JUMPSHOT) += jumpshot.o @@ -31,8 +30,10 @@ obj-$(CONFIG_USB_STORAGE_CYPRESS_ATACB) += ums-cypress.o obj-$(CONFIG_USB_STORAGE_ISD200) += ums-isd200.o obj-$(CONFIG_USB_STORAGE_SDDR09) += ums-sddr09.o obj-$(CONFIG_USB_STORAGE_SDDR55) += ums-sddr55.o +obj-$(CONFIG_USB_STORAGE_USBAT) += ums-usbat.o ums-cypress-objs := cypress_atacb.o ums-isd200-objs := isd200.o ums-sddr09-objs := sddr09.o ums-sddr55-objs := sddr55.o +ums-usbat-objs := shuttle_usbat.o diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c index ae6d6481..d4fe0bb 100644 --- a/drivers/usb/storage/shuttle_usbat.c +++ b/drivers/usb/storage/shuttle_usbat.c @@ -42,6 +42,7 @@ */ #include +#include #include #include @@ -52,7 +53,97 @@ #include "transport.h" #include "protocol.h" #include "debug.h" -#include "shuttle_usbat.h" + + +/* Supported device types */ +#define USBAT_DEV_HP8200 0x01 +#define USBAT_DEV_FLASH 0x02 + +#define USBAT_EPP_PORT 0x10 +#define USBAT_EPP_REGISTER 0x30 +#define USBAT_ATA 0x40 +#define USBAT_ISA 0x50 + +/* Commands (need to be logically OR'd with an access type */ +#define USBAT_CMD_READ_REG 0x00 +#define USBAT_CMD_WRITE_REG 0x01 +#define USBAT_CMD_READ_BLOCK 0x02 +#define USBAT_CMD_WRITE_BLOCK 0x03 +#define USBAT_CMD_COND_READ_BLOCK 0x04 +#define USBAT_CMD_COND_WRITE_BLOCK 0x05 +#define USBAT_CMD_WRITE_REGS 0x07 + +/* Commands (these don't need an access type) */ +#define USBAT_CMD_EXEC_CMD 0x80 +#define USBAT_CMD_SET_FEAT 0x81 +#define USBAT_CMD_UIO 0x82 + +/* Methods of accessing UIO register */ +#define USBAT_UIO_READ 1 +#define USBAT_UIO_WRITE 0 + +/* Qualifier bits */ +#define USBAT_QUAL_FCQ 0x20 /* full compare */ +#define USBAT_QUAL_ALQ 0x10 /* auto load subcount */ + +/* USBAT Flash Media status types */ +#define USBAT_FLASH_MEDIA_NONE 0 +#define USBAT_FLASH_MEDIA_CF 1 + +/* USBAT Flash Media change types */ +#define USBAT_FLASH_MEDIA_SAME 0 +#define USBAT_FLASH_MEDIA_CHANGED 1 + +/* USBAT ATA registers */ +#define USBAT_ATA_DATA 0x10 /* read/write data (R/W) */ +#define USBAT_ATA_FEATURES 0x11 /* set features (W) */ +#define USBAT_ATA_ERROR 0x11 /* error (R) */ +#define USBAT_ATA_SECCNT 0x12 /* sector count (R/W) */ +#define USBAT_ATA_SECNUM 0x13 /* sector number (R/W) */ +#define USBAT_ATA_LBA_ME 0x14 /* cylinder low (R/W) */ +#define USBAT_ATA_LBA_HI 0x15 /* cylinder high (R/W) */ +#define USBAT_ATA_DEVICE 0x16 /* head/device selection (R/W) */ +#define USBAT_ATA_STATUS 0x17 /* device status (R) */ +#define USBAT_ATA_CMD 0x17 /* device command (W) */ +#define USBAT_ATA_ALTSTATUS 0x0E /* status (no clear IRQ) (R) */ + +/* USBAT User I/O Data registers */ +#define USBAT_UIO_EPAD 0x80 /* Enable Peripheral Control Signals */ +#define USBAT_UIO_CDT 0x40 /* Card Detect (Read Only) */ + /* CDT = ACKD & !UI1 & !UI0 */ +#define USBAT_UIO_1 0x20 /* I/O 1 */ +#define USBAT_UIO_0 0x10 /* I/O 0 */ +#define USBAT_UIO_EPP_ATA 0x08 /* 1=EPP mode, 0=ATA mode */ +#define USBAT_UIO_UI1 0x04 /* Input 1 */ +#define USBAT_UIO_UI0 0x02 /* Input 0 */ +#define USBAT_UIO_INTR_ACK 0x01 /* Interrupt (ATA/ISA)/Acknowledge (EPP) */ + +/* USBAT User I/O Enable registers */ +#define USBAT_UIO_DRVRST 0x80 /* Reset Peripheral */ +#define USBAT_UIO_ACKD 0x40 /* Enable Card Detect */ +#define USBAT_UIO_OE1 0x20 /* I/O 1 set=output/clr=input */ + /* If ACKD=1, set OE1 to 1 also. */ +#define USBAT_UIO_OE0 0x10 /* I/O 0 set=output/clr=input */ +#define USBAT_UIO_ADPRST 0x01 /* Reset SCM chip */ + +/* USBAT Features */ +#define USBAT_FEAT_ETEN 0x80 /* External trigger enable */ +#define USBAT_FEAT_U1 0x08 +#define USBAT_FEAT_U0 0x04 +#define USBAT_FEAT_ET1 0x02 +#define USBAT_FEAT_ET2 0x01 + +struct usbat_info { + int devicetype; + + /* Used for Flash readers only */ + unsigned long sectors; /* total sector count */ + unsigned long ssize; /* sector size in bytes */ + + unsigned char sense_key; + unsigned long sense_asc; /* additional sense code */ + unsigned long sense_ascq; /* additional sense code qualifier */ +}; #define short_pack(LSB,MSB) ( ((u16)(LSB)) | ( ((u16)(MSB))<<8 ) ) #define LSB_of(s) ((s)&0xFF) @@ -63,6 +154,48 @@ static int transferred = 0; static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us); static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us); +static int init_usbat_cd(struct us_data *us); +static int init_usbat_flash(struct us_data *us); + + +/* + * The table of devices + */ +#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ + .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + +struct usb_device_id usbat_usb_ids[] = { +# include "unusual_usbat.h" + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, usbat_usb_ids); + +#undef UNUSUAL_DEV + +/* + * The flags table + */ +#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ + vendor_name, product_name, use_protocol, use_transport, \ + init_function, Flags) \ +{ \ + .vendorName = vendor_name, \ + .productName = product_name, \ + .useProtocol = use_protocol, \ + .useTransport = use_transport, \ + .initFunction = init_function, \ +} + +static struct us_unusual_dev usbat_unusual_dev_list[] = { +# include "unusual_usbat.h" + { } /* Terminating entry */ +}; + +#undef UNUSUAL_DEV + /* * Convenience function to produce an ATA read/write sectors command * Use cmd=0x20 for read, cmd=0x30 for write @@ -1684,37 +1817,61 @@ static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us) return USB_STOR_TRANSPORT_FAILED; } -int init_usbat_cd(struct us_data *us) +static int init_usbat_cd(struct us_data *us) { return init_usbat(us, USBAT_DEV_HP8200); } - -int init_usbat_flash(struct us_data *us) +static int init_usbat_flash(struct us_data *us) { return init_usbat(us, USBAT_DEV_FLASH); } -int init_usbat_probe(struct us_data *us) +static int usbat_probe(struct usb_interface *intf, + const struct usb_device_id *id) { - return init_usbat(us, 0); + struct us_data *us; + int result; + + result = usb_stor_probe1(&us, intf, id, + (id - usbat_usb_ids) + usbat_unusual_dev_list); + if (result) + return result; + + /* The actual transport will be determined later by the + * initialization routine; this is just a placeholder. + */ + us->transport_name = "Shuttle USBAT"; + us->transport = usbat_flash_transport; + us->transport_reset = usb_stor_CB_reset; + us->max_lun = 1; + + result = usb_stor_probe2(us); + return result; } -/* - * Default transport function. Attempts to detect which transport function - * should be called, makes it the new default, and calls it. - * - * This function should never be called. Our usbat_init() function detects the - * device type and changes the us->transport ptr to the transport function - * relevant to the device. - * However, we'll support this impossible(?) case anyway. - */ -int usbat_transport(struct scsi_cmnd *srb, struct us_data *us) +static struct usb_driver usbat_driver = { + .name = "ums-usbat", + .probe = usbat_probe, + .disconnect = usb_stor_disconnect, + .suspend = usb_stor_suspend, + .resume = usb_stor_resume, + .reset_resume = usb_stor_reset_resume, + .pre_reset = usb_stor_pre_reset, + .post_reset = usb_stor_post_reset, + .id_table = usbat_usb_ids, + .soft_unbind = 1, +}; + +static int __init usbat_init(void) { - struct usbat_info *info = (struct usbat_info*) (us->extra); - - if (usbat_set_transport(us, info, 0)) - return USB_STOR_TRANSPORT_ERROR; + return usb_register(&usbat_driver); +} - return us->transport(srb, us); +static void __exit usbat_exit(void) +{ + usb_deregister(&usbat_driver); } + +module_init(usbat_init); +module_exit(usbat_exit); diff --git a/drivers/usb/storage/shuttle_usbat.h b/drivers/usb/storage/shuttle_usbat.h deleted file mode 100644 index d8bfc43..0000000 --- a/drivers/usb/storage/shuttle_usbat.h +++ /dev/null @@ -1,123 +0,0 @@ -/* Driver for SCM Microsystems USB-ATAPI cable - * Header File - * - * Current development and maintenance by: - * (c) 2000 Robert Baruch (autophile@dol.net) - * (c) 2004, 2005 Daniel Drake - * - * See shuttle_usbat.c for more explanation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2, or (at your option) any - * later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef _USB_SHUTTLE_USBAT_H -#define _USB_SHUTTLE_USBAT_H - -/* Supported device types */ -#define USBAT_DEV_HP8200 0x01 -#define USBAT_DEV_FLASH 0x02 - -#define USBAT_EPP_PORT 0x10 -#define USBAT_EPP_REGISTER 0x30 -#define USBAT_ATA 0x40 -#define USBAT_ISA 0x50 - -/* Commands (need to be logically OR'd with an access type */ -#define USBAT_CMD_READ_REG 0x00 -#define USBAT_CMD_WRITE_REG 0x01 -#define USBAT_CMD_READ_BLOCK 0x02 -#define USBAT_CMD_WRITE_BLOCK 0x03 -#define USBAT_CMD_COND_READ_BLOCK 0x04 -#define USBAT_CMD_COND_WRITE_BLOCK 0x05 -#define USBAT_CMD_WRITE_REGS 0x07 - -/* Commands (these don't need an access type) */ -#define USBAT_CMD_EXEC_CMD 0x80 -#define USBAT_CMD_SET_FEAT 0x81 -#define USBAT_CMD_UIO 0x82 - -/* Methods of accessing UIO register */ -#define USBAT_UIO_READ 1 -#define USBAT_UIO_WRITE 0 - -/* Qualifier bits */ -#define USBAT_QUAL_FCQ 0x20 /* full compare */ -#define USBAT_QUAL_ALQ 0x10 /* auto load subcount */ - -/* USBAT Flash Media status types */ -#define USBAT_FLASH_MEDIA_NONE 0 -#define USBAT_FLASH_MEDIA_CF 1 - -/* USBAT Flash Media change types */ -#define USBAT_FLASH_MEDIA_SAME 0 -#define USBAT_FLASH_MEDIA_CHANGED 1 - -/* USBAT ATA registers */ -#define USBAT_ATA_DATA 0x10 /* read/write data (R/W) */ -#define USBAT_ATA_FEATURES 0x11 /* set features (W) */ -#define USBAT_ATA_ERROR 0x11 /* error (R) */ -#define USBAT_ATA_SECCNT 0x12 /* sector count (R/W) */ -#define USBAT_ATA_SECNUM 0x13 /* sector number (R/W) */ -#define USBAT_ATA_LBA_ME 0x14 /* cylinder low (R/W) */ -#define USBAT_ATA_LBA_HI 0x15 /* cylinder high (R/W) */ -#define USBAT_ATA_DEVICE 0x16 /* head/device selection (R/W) */ -#define USBAT_ATA_STATUS 0x17 /* device status (R) */ -#define USBAT_ATA_CMD 0x17 /* device command (W) */ -#define USBAT_ATA_ALTSTATUS 0x0E /* status (no clear IRQ) (R) */ - -/* USBAT User I/O Data registers */ -#define USBAT_UIO_EPAD 0x80 /* Enable Peripheral Control Signals */ -#define USBAT_UIO_CDT 0x40 /* Card Detect (Read Only) */ - /* CDT = ACKD & !UI1 & !UI0 */ -#define USBAT_UIO_1 0x20 /* I/O 1 */ -#define USBAT_UIO_0 0x10 /* I/O 0 */ -#define USBAT_UIO_EPP_ATA 0x08 /* 1=EPP mode, 0=ATA mode */ -#define USBAT_UIO_UI1 0x04 /* Input 1 */ -#define USBAT_UIO_UI0 0x02 /* Input 0 */ -#define USBAT_UIO_INTR_ACK 0x01 /* Interrupt (ATA/ISA)/Acknowledge (EPP) */ - -/* USBAT User I/O Enable registers */ -#define USBAT_UIO_DRVRST 0x80 /* Reset Peripheral */ -#define USBAT_UIO_ACKD 0x40 /* Enable Card Detect */ -#define USBAT_UIO_OE1 0x20 /* I/O 1 set=output/clr=input */ - /* If ACKD=1, set OE1 to 1 also. */ -#define USBAT_UIO_OE0 0x10 /* I/O 0 set=output/clr=input */ -#define USBAT_UIO_ADPRST 0x01 /* Reset SCM chip */ - -/* USBAT Features */ -#define USBAT_FEAT_ETEN 0x80 /* External trigger enable */ -#define USBAT_FEAT_U1 0x08 -#define USBAT_FEAT_U0 0x04 -#define USBAT_FEAT_ET1 0x02 -#define USBAT_FEAT_ET2 0x01 - -extern int usbat_transport(struct scsi_cmnd *srb, struct us_data *us); -extern int init_usbat_cd(struct us_data *us); -extern int init_usbat_flash(struct us_data *us); -extern int init_usbat_probe(struct us_data *us); - -struct usbat_info { - int devicetype; - - /* Used for Flash readers only */ - unsigned long sectors; /* total sector count */ - unsigned long ssize; /* sector size in bytes */ - - unsigned char sense_key; - unsigned long sense_asc; /* additional sense code */ - unsigned long sense_ascq; /* additional sense code qualifier */ -}; - -#endif diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index eff97aed..6462c4c 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -85,18 +85,6 @@ UNUSUAL_DEV( 0x03f0, 0x0107, 0x0200, 0x0200, "CD-Writer+", US_SC_8070, US_PR_CB, NULL, 0), -#ifdef CONFIG_USB_STORAGE_USBAT -UNUSUAL_DEV( 0x03f0, 0x0207, 0x0001, 0x0001, - "HP", - "CD-Writer+ 8200e", - US_SC_8070, US_PR_USBAT, init_usbat_cd, 0), - -UNUSUAL_DEV( 0x03f0, 0x0307, 0x0001, 0x0001, - "HP", - "CD-Writer+ CD-4e", - US_SC_8070, US_PR_USBAT, init_usbat_cd, 0), -#endif - /* Reported by Ben Efros */ UNUSUAL_DEV( 0x03f0, 0x070c, 0x0000, 0x0000, "HP", @@ -506,14 +494,6 @@ UNUSUAL_DEV( 0x04e6, 0x0101, 0x0200, 0x0200, "CD-RW Device", US_SC_8020, US_PR_CB, NULL, 0), -#ifdef CONFIG_USB_STORAGE_USBAT -UNUSUAL_DEV( 0x04e6, 0x1010, 0x0000, 0x9999, - "Shuttle/SCM", - "USBAT-02", - US_SC_SCSI, US_PR_USBAT, init_usbat_flash, - US_FL_SINGLE_LUN), -#endif - /* Reported by Dmitry Khlystov */ UNUSUAL_DEV( 0x04e8, 0x507c, 0x0220, 0x0220, "Samsung", @@ -972,14 +952,6 @@ UNUSUAL_DEV( 0x0781, 0x0002, 0x0009, 0x0009, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY ), -#ifdef CONFIG_USB_STORAGE_USBAT -UNUSUAL_DEV( 0x0781, 0x0005, 0x0005, 0x0005, - "Sandisk", - "ImageMate SDDR-05b", - US_SC_SCSI, US_PR_USBAT, init_usbat_flash, - US_FL_SINGLE_LUN ), -#endif - UNUSUAL_DEV( 0x0781, 0x0100, 0x0100, 0x0100, "Sandisk", "ImageMate SDDR-12", diff --git a/drivers/usb/storage/unusual_usbat.h b/drivers/usb/storage/unusual_usbat.h new file mode 100644 index 0000000..80e869f --- /dev/null +++ b/drivers/usb/storage/unusual_usbat.h @@ -0,0 +1,43 @@ +/* Unusual Devices File for SCM Microsystems (a.k.a. Shuttle) USB-ATAPI cable + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#if defined(CONFIG_USB_STORAGE_USBAT) || \ + defined(CONFIG_USB_STORAGE_USBAT_MODULE) + +UNUSUAL_DEV( 0x03f0, 0x0207, 0x0001, 0x0001, + "HP", + "CD-Writer+ 8200e", + US_SC_8070, US_PR_USBAT, init_usbat_cd, 0), + +UNUSUAL_DEV( 0x03f0, 0x0307, 0x0001, 0x0001, + "HP", + "CD-Writer+ CD-4e", + US_SC_8070, US_PR_USBAT, init_usbat_cd, 0), + +UNUSUAL_DEV( 0x04e6, 0x1010, 0x0000, 0x9999, + "Shuttle/SCM", + "USBAT-02", + US_SC_SCSI, US_PR_USBAT, init_usbat_flash, + US_FL_SINGLE_LUN), + +UNUSUAL_DEV( 0x0781, 0x0005, 0x0005, 0x0005, + "Sandisk", + "ImageMate SDDR-05b", + US_SC_SCSI, US_PR_USBAT, init_usbat_flash, + US_FL_SINGLE_LUN), + +#endif /* defined(CONFIG_USB_STORAGE_USBAT) || ... */ diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 241e194..3ad22a8 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -66,9 +66,6 @@ #include "debug.h" #include "initializers.h" -#ifdef CONFIG_USB_STORAGE_USBAT -#include "shuttle_usbat.h" -#endif #ifdef CONFIG_USB_STORAGE_FREECOM #include "freecom.h" #endif @@ -610,15 +607,6 @@ static void get_transport(struct us_data *us) us->transport_reset = usb_stor_Bulk_reset; break; -#ifdef CONFIG_USB_STORAGE_USBAT - case US_PR_USBAT: - us->transport_name = "Shuttle USBAT"; - us->transport = usbat_transport; - us->transport_reset = usb_stor_CB_reset; - us->max_lun = 1; - break; -#endif - #ifdef CONFIG_USB_STORAGE_FREECOM case US_PR_FREECOM: us->transport_name = "Freecom"; diff --git a/drivers/usb/storage/usual-tables.c b/drivers/usb/storage/usual-tables.c index be461ee..899a8c8 100644 --- a/drivers/usb/storage/usual-tables.c +++ b/drivers/usb/storage/usual-tables.c @@ -81,6 +81,7 @@ static struct ignore_entry ignore_ids[] = { # include "unusual_isd200.h" # include "unusual_sddr09.h" # include "unusual_sddr55.h" +# include "unusual_usbat.h" { } /* Terminating entry */ }; -- cgit v1.1 From 0d62939fab3cf28a23ac6934cec599793d3a1d9d Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 12 Feb 2009 14:48:11 -0500 Subject: usb-storage: make freecom a separate module This patch (as1212) converts usb-storage's freecom subdriver into a separate module. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/Kconfig | 4 +- drivers/usb/storage/Makefile | 3 +- drivers/usb/storage/freecom.c | 95 +++++++++++++++++++++++++++++++++-- drivers/usb/storage/freecom.h | 34 ------------- drivers/usb/storage/unusual_devs.h | 7 --- drivers/usb/storage/unusual_freecom.h | 26 ++++++++++ drivers/usb/storage/usb.c | 12 ----- drivers/usb/storage/usual-tables.c | 1 + 8 files changed, 122 insertions(+), 60 deletions(-) delete mode 100644 drivers/usb/storage/freecom.h create mode 100644 drivers/usb/storage/unusual_freecom.h (limited to 'drivers/usb') diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index 44c6b19..14508b8 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -39,12 +39,14 @@ config USB_STORAGE_DATAFAB Datafab has a web page at . config USB_STORAGE_FREECOM - bool "Freecom USB/ATAPI Bridge support" + tristate "Freecom USB/ATAPI Bridge support" depends on USB_STORAGE help Support for the Freecom USB to IDE/ATAPI adaptor. Freecom has a web page at . + If this driver is compiled as a module, it will be named ums-freecom. + config USB_STORAGE_ISD200 tristate "ISD-200 USB/ATA Bridge support" depends on USB_STORAGE diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile index 2387368..93e91ec 100644 --- a/drivers/usb/storage/Makefile +++ b/drivers/usb/storage/Makefile @@ -10,7 +10,6 @@ EXTRA_CFLAGS := -Idrivers/scsi obj-$(CONFIG_USB_STORAGE) += usb-storage.o usb-storage-obj-$(CONFIG_USB_STORAGE_DEBUG) += debug.o -usb-storage-obj-$(CONFIG_USB_STORAGE_FREECOM) += freecom.o usb-storage-obj-$(CONFIG_USB_STORAGE_DATAFAB) += datafab.o usb-storage-obj-$(CONFIG_USB_STORAGE_JUMPSHOT) += jumpshot.o usb-storage-obj-$(CONFIG_USB_STORAGE_ALAUDA) += alauda.o @@ -27,12 +26,14 @@ else endif obj-$(CONFIG_USB_STORAGE_CYPRESS_ATACB) += ums-cypress.o +obj-$(CONFIG_USB_STORAGE_FREECOM) += ums-freecom.o obj-$(CONFIG_USB_STORAGE_ISD200) += ums-isd200.o obj-$(CONFIG_USB_STORAGE_SDDR09) += ums-sddr09.o obj-$(CONFIG_USB_STORAGE_SDDR55) += ums-sddr55.o obj-$(CONFIG_USB_STORAGE_USBAT) += ums-usbat.o ums-cypress-objs := cypress_atacb.o +ums-freecom-objs := freecom.o ums-isd200-objs := isd200.o ums-sddr09-objs := sddr09.o ums-sddr55-objs := sddr55.o diff --git a/drivers/usb/storage/freecom.c b/drivers/usb/storage/freecom.c index 73ac726..393047b 100644 --- a/drivers/usb/storage/freecom.c +++ b/drivers/usb/storage/freecom.c @@ -26,6 +26,7 @@ * (http://www.freecom.de/) */ +#include #include #include @@ -33,7 +34,6 @@ #include "transport.h" #include "protocol.h" #include "debug.h" -#include "freecom.h" #ifdef CONFIG_USB_STORAGE_DEBUG static void pdump (void *, int); @@ -103,6 +103,47 @@ struct freecom_status { #define FCM_PACKET_LENGTH 64 #define FCM_STATUS_PACKET_LENGTH 4 +static int init_freecom(struct us_data *us); + + +/* + * The table of devices + */ +#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ + .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + +struct usb_device_id freecom_usb_ids[] = { +# include "unusual_freecom.h" + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, freecom_usb_ids); + +#undef UNUSUAL_DEV + +/* + * The flags table + */ +#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ + vendor_name, product_name, use_protocol, use_transport, \ + init_function, Flags) \ +{ \ + .vendorName = vendor_name, \ + .productName = product_name, \ + .useProtocol = use_protocol, \ + .useTransport = use_transport, \ + .initFunction = init_function, \ +} + +static struct us_unusual_dev freecom_unusual_dev_list[] = { +# include "unusual_freecom.h" + { } /* Terminating entry */ +}; + +#undef UNUSUAL_DEV + static int freecom_readdata (struct scsi_cmnd *srb, struct us_data *us, unsigned int ipipe, unsigned int opipe, int count) @@ -173,7 +214,7 @@ freecom_writedata (struct scsi_cmnd *srb, struct us_data *us, * Transport for the Freecom USB/IDE adaptor. * */ -int freecom_transport(struct scsi_cmnd *srb, struct us_data *us) +static int freecom_transport(struct scsi_cmnd *srb, struct us_data *us) { struct freecom_cb_wrap *fcb; struct freecom_status *fst; @@ -377,8 +418,7 @@ int freecom_transport(struct scsi_cmnd *srb, struct us_data *us) return USB_STOR_TRANSPORT_GOOD; } -int -freecom_init (struct us_data *us) +static int init_freecom(struct us_data *us) { int result; char *buffer = us->iobuf; @@ -417,7 +457,7 @@ freecom_init (struct us_data *us) return USB_STOR_TRANSPORT_GOOD; } -int usb_stor_freecom_reset(struct us_data *us) +static int usb_stor_freecom_reset(struct us_data *us) { printk (KERN_CRIT "freecom reset called\n"); @@ -479,3 +519,48 @@ static void pdump (void *ibuffer, int length) } #endif +static int freecom_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct us_data *us; + int result; + + result = usb_stor_probe1(&us, intf, id, + (id - freecom_usb_ids) + freecom_unusual_dev_list); + if (result) + return result; + + us->transport_name = "Freecom"; + us->transport = freecom_transport; + us->transport_reset = usb_stor_freecom_reset; + us->max_lun = 0; + + result = usb_stor_probe2(us); + return result; +} + +static struct usb_driver freecom_driver = { + .name = "ums-freecom", + .probe = freecom_probe, + .disconnect = usb_stor_disconnect, + .suspend = usb_stor_suspend, + .resume = usb_stor_resume, + .reset_resume = usb_stor_reset_resume, + .pre_reset = usb_stor_pre_reset, + .post_reset = usb_stor_post_reset, + .id_table = freecom_usb_ids, + .soft_unbind = 1, +}; + +static int __init freecom_init(void) +{ + return usb_register(&freecom_driver); +} + +static void __exit freecom_exit(void) +{ + usb_deregister(&freecom_driver); +} + +module_init(freecom_init); +module_exit(freecom_exit); diff --git a/drivers/usb/storage/freecom.h b/drivers/usb/storage/freecom.h deleted file mode 100644 index 20d0fe6..0000000 --- a/drivers/usb/storage/freecom.h +++ /dev/null @@ -1,34 +0,0 @@ -/* Driver for Freecom USB/IDE adaptor - * - * Freecom v0.1: - * - * First release - * - * Current development and maintenance by: - * (c) 2000 David Brown - * - * See freecom.c for more explanation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2, or (at your option) any - * later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef _FREECOM_USB_H -#define _FREECOM_USB_H - -extern int freecom_transport(struct scsi_cmnd *srb, struct us_data *us); -extern int usb_stor_freecom_reset(struct us_data *us); -extern int freecom_init (struct us_data *us); - -#endif diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 6462c4c..eef2075 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -958,13 +958,6 @@ UNUSUAL_DEV( 0x0781, 0x0100, 0x0100, 0x0100, US_SC_SCSI, US_PR_CB, NULL, US_FL_SINGLE_LUN ), -#ifdef CONFIG_USB_STORAGE_FREECOM -UNUSUAL_DEV( 0x07ab, 0xfc01, 0x0000, 0x9999, - "Freecom", - "USB-IDE", - US_SC_QIC, US_PR_FREECOM, freecom_init, 0), -#endif - /* Reported by Eero Volotinen */ UNUSUAL_DEV( 0x07ab, 0xfccd, 0x0000, 0x9999, "Freecom Technologies", diff --git a/drivers/usb/storage/unusual_freecom.h b/drivers/usb/storage/unusual_freecom.h new file mode 100644 index 0000000..3758679 --- /dev/null +++ b/drivers/usb/storage/unusual_freecom.h @@ -0,0 +1,26 @@ +/* Unusual Devices File for the Freecom USB/IDE adaptor + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#if defined(CONFIG_USB_STORAGE_FREECOM) || \ + defined(CONFIG_USB_STORAGE_FREECOM_MODULE) + +UNUSUAL_DEV( 0x07ab, 0xfc01, 0x0000, 0x9999, + "Freecom", + "USB-IDE", + US_SC_QIC, US_PR_FREECOM, init_freecom, 0), + +#endif /* defined(CONFIG_USB_STORAGE_FREECOM) || ... */ diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 3ad22a8..985275d 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -66,9 +66,6 @@ #include "debug.h" #include "initializers.h" -#ifdef CONFIG_USB_STORAGE_FREECOM -#include "freecom.h" -#endif #ifdef CONFIG_USB_STORAGE_DATAFAB #include "datafab.h" #endif @@ -607,15 +604,6 @@ static void get_transport(struct us_data *us) us->transport_reset = usb_stor_Bulk_reset; break; -#ifdef CONFIG_USB_STORAGE_FREECOM - case US_PR_FREECOM: - us->transport_name = "Freecom"; - us->transport = freecom_transport; - us->transport_reset = usb_stor_freecom_reset; - us->max_lun = 0; - break; -#endif - #ifdef CONFIG_USB_STORAGE_DATAFAB case US_PR_DATAFAB: us->transport_name = "Datafab Bulk-Only"; diff --git a/drivers/usb/storage/usual-tables.c b/drivers/usb/storage/usual-tables.c index 899a8c8..a50f0ee 100644 --- a/drivers/usb/storage/usual-tables.c +++ b/drivers/usb/storage/usual-tables.c @@ -78,6 +78,7 @@ struct ignore_entry { static struct ignore_entry ignore_ids[] = { # include "unusual_cypress.h" +# include "unusual_freecom.h" # include "unusual_isd200.h" # include "unusual_sddr09.h" # include "unusual_sddr55.h" -- cgit v1.1 From 2cbbf3576aa9eae9a92f2669f38a453b6cb8e956 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 12 Feb 2009 14:48:15 -0500 Subject: usb-storage: make datafab a separate module This patch (as1213) converts usb-storage's datafab subdriver into a separate module. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/Kconfig | 4 +- drivers/usb/storage/Makefile | 3 +- drivers/usb/storage/datafab.c | 100 +++++++++++++++++++++++++++++++++- drivers/usb/storage/datafab.h | 40 -------------- drivers/usb/storage/unusual_datafab.h | 98 +++++++++++++++++++++++++++++++++ drivers/usb/storage/unusual_devs.h | 86 ----------------------------- drivers/usb/storage/usb.c | 12 ---- drivers/usb/storage/usual-tables.c | 1 + 8 files changed, 202 insertions(+), 142 deletions(-) delete mode 100644 drivers/usb/storage/datafab.h create mode 100644 drivers/usb/storage/unusual_datafab.h (limited to 'drivers/usb') diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index 14508b8..7dac413 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -32,12 +32,14 @@ config USB_STORAGE_DEBUG verbose debugging messages. config USB_STORAGE_DATAFAB - bool "Datafab Compact Flash Reader support" + tristate "Datafab Compact Flash Reader support" depends on USB_STORAGE help Support for certain Datafab CompactFlash readers. Datafab has a web page at . + If this driver is compiled as a module, it will be named ums-datafab. + config USB_STORAGE_FREECOM tristate "Freecom USB/ATAPI Bridge support" depends on USB_STORAGE diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile index 93e91ec..0f78bd6 100644 --- a/drivers/usb/storage/Makefile +++ b/drivers/usb/storage/Makefile @@ -10,7 +10,6 @@ EXTRA_CFLAGS := -Idrivers/scsi obj-$(CONFIG_USB_STORAGE) += usb-storage.o usb-storage-obj-$(CONFIG_USB_STORAGE_DEBUG) += debug.o -usb-storage-obj-$(CONFIG_USB_STORAGE_DATAFAB) += datafab.o usb-storage-obj-$(CONFIG_USB_STORAGE_JUMPSHOT) += jumpshot.o usb-storage-obj-$(CONFIG_USB_STORAGE_ALAUDA) += alauda.o usb-storage-obj-$(CONFIG_USB_STORAGE_ONETOUCH) += onetouch.o @@ -26,6 +25,7 @@ else endif obj-$(CONFIG_USB_STORAGE_CYPRESS_ATACB) += ums-cypress.o +obj-$(CONFIG_USB_STORAGE_DATAFAB) += ums-datafab.o obj-$(CONFIG_USB_STORAGE_FREECOM) += ums-freecom.o obj-$(CONFIG_USB_STORAGE_ISD200) += ums-isd200.o obj-$(CONFIG_USB_STORAGE_SDDR09) += ums-sddr09.o @@ -33,6 +33,7 @@ obj-$(CONFIG_USB_STORAGE_SDDR55) += ums-sddr55.o obj-$(CONFIG_USB_STORAGE_USBAT) += ums-usbat.o ums-cypress-objs := cypress_atacb.o +ums-datafab-objs := datafab.o ums-freecom-objs := freecom.o ums-isd200-objs := isd200.o ums-sddr09-objs := sddr09.o diff --git a/drivers/usb/storage/datafab.c b/drivers/usb/storage/datafab.c index 17f1ae2..2d8d835 100644 --- a/drivers/usb/storage/datafab.c +++ b/drivers/usb/storage/datafab.c @@ -49,6 +49,7 @@ */ #include +#include #include #include @@ -58,12 +59,61 @@ #include "transport.h" #include "protocol.h" #include "debug.h" -#include "datafab.h" + +struct datafab_info { + unsigned long sectors; /* total sector count */ + unsigned long ssize; /* sector size in bytes */ + signed char lun; /* used for dual-slot readers */ + + /* the following aren't used yet */ + unsigned char sense_key; + unsigned long sense_asc; /* additional sense code */ + unsigned long sense_ascq; /* additional sense code qualifier */ +}; static int datafab_determine_lun(struct us_data *us, struct datafab_info *info); +/* + * The table of devices + */ +#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ + .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + +struct usb_device_id datafab_usb_ids[] = { +# include "unusual_datafab.h" + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, datafab_usb_ids); + +#undef UNUSUAL_DEV + +/* + * The flags table + */ +#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ + vendor_name, product_name, use_protocol, use_transport, \ + init_function, Flags) \ +{ \ + .vendorName = vendor_name, \ + .productName = product_name, \ + .useProtocol = use_protocol, \ + .useTransport = use_transport, \ + .initFunction = init_function, \ +} + +static struct us_unusual_dev datafab_unusual_dev_list[] = { +# include "unusual_datafab.h" + { } /* Terminating entry */ +}; + +#undef UNUSUAL_DEV + + static inline int datafab_bulk_read(struct us_data *us, unsigned char *data, unsigned int len) { if (len == 0) @@ -500,7 +550,7 @@ static void datafab_info_destructor(void *extra) // Transport for the Datafab MDCFE-B // -int datafab_transport(struct scsi_cmnd * srb, struct us_data *us) +static int datafab_transport(struct scsi_cmnd *srb, struct us_data *us) { struct datafab_info *info; int rc; @@ -665,3 +715,49 @@ int datafab_transport(struct scsi_cmnd * srb, struct us_data *us) info->sense_ascq = 0x00; return USB_STOR_TRANSPORT_FAILED; } + +static int datafab_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct us_data *us; + int result; + + result = usb_stor_probe1(&us, intf, id, + (id - datafab_usb_ids) + datafab_unusual_dev_list); + if (result) + return result; + + us->transport_name = "Datafab Bulk-Only"; + us->transport = datafab_transport; + us->transport_reset = usb_stor_Bulk_reset; + us->max_lun = 1; + + result = usb_stor_probe2(us); + return result; +} + +static struct usb_driver datafab_driver = { + .name = "ums-datafab", + .probe = datafab_probe, + .disconnect = usb_stor_disconnect, + .suspend = usb_stor_suspend, + .resume = usb_stor_resume, + .reset_resume = usb_stor_reset_resume, + .pre_reset = usb_stor_pre_reset, + .post_reset = usb_stor_post_reset, + .id_table = datafab_usb_ids, + .soft_unbind = 1, +}; + +static int __init datafab_init(void) +{ + return usb_register(&datafab_driver); +} + +static void __exit datafab_exit(void) +{ + usb_deregister(&datafab_driver); +} + +module_init(datafab_init); +module_exit(datafab_exit); diff --git a/drivers/usb/storage/datafab.h b/drivers/usb/storage/datafab.h deleted file mode 100644 index 32e3f27..0000000 --- a/drivers/usb/storage/datafab.h +++ /dev/null @@ -1,40 +0,0 @@ -/* Driver for Datafab MDCFE-B USB Compact Flash reader - * Header File - * - * Current development and maintenance by: - * (c) 2000 Jimmie Mayfield (mayfield+datafab@sackheads.org) - * - * See datafab.c for more explanation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2, or (at your option) any - * later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef _USB_DATAFAB_MDCFE_B_H -#define _USB_DATAFAB_MDCFE_B_H - -extern int datafab_transport(struct scsi_cmnd *srb, struct us_data *us); - -struct datafab_info { - unsigned long sectors; // total sector count - unsigned long ssize; // sector size in bytes - signed char lun; // used for dual-slot readers - - // the following aren't used yet - unsigned char sense_key; - unsigned long sense_asc; // additional sense code - unsigned long sense_ascq; // additional sense code qualifier -}; - -#endif diff --git a/drivers/usb/storage/unusual_datafab.h b/drivers/usb/storage/unusual_datafab.h new file mode 100644 index 0000000..c9298ce --- /dev/null +++ b/drivers/usb/storage/unusual_datafab.h @@ -0,0 +1,98 @@ +/* Unusual Devices File for the Datafab USB Compact Flash reader + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#if defined(CONFIG_USB_STORAGE_DATAFAB) || \ + defined(CONFIG_USB_STORAGE_DATAFAB_MODULE) + +UNUSUAL_DEV( 0x07c4, 0xa000, 0x0000, 0x0015, + "Datafab", + "MDCFE-B USB CF Reader", + US_SC_SCSI, US_PR_DATAFAB, NULL, + 0), + +/* + * The following Datafab-based devices may or may not work + * using the current driver...the 0xffff is arbitrary since I + * don't know what device versions exist for these guys. + * + * The 0xa003 and 0xa004 devices in particular I'm curious about. + * I'm told they exist but so far nobody has come forward to say that + * they work with this driver. Given the success we've had getting + * other Datafab-based cards operational with this driver, I've decided + * to leave these two devices in the list. + */ +UNUSUAL_DEV( 0x07c4, 0xa001, 0x0000, 0xffff, + "SIIG/Datafab", + "SIIG/Datafab Memory Stick+CF Reader/Writer", + US_SC_SCSI, US_PR_DATAFAB, NULL, + 0), + +/* Reported by Josef Reisinger */ +UNUSUAL_DEV( 0x07c4, 0xa002, 0x0000, 0xffff, + "Datafab/Unknown", + "MD2/MD3 Disk enclosure", + US_SC_SCSI, US_PR_DATAFAB, NULL, + US_FL_SINGLE_LUN), + +UNUSUAL_DEV( 0x07c4, 0xa003, 0x0000, 0xffff, + "Datafab/Unknown", + "Datafab-based Reader", + US_SC_SCSI, US_PR_DATAFAB, NULL, + 0), + +UNUSUAL_DEV( 0x07c4, 0xa004, 0x0000, 0xffff, + "Datafab/Unknown", + "Datafab-based Reader", + US_SC_SCSI, US_PR_DATAFAB, NULL, + 0), + +UNUSUAL_DEV( 0x07c4, 0xa005, 0x0000, 0xffff, + "PNY/Datafab", + "PNY/Datafab CF+SM Reader", + US_SC_SCSI, US_PR_DATAFAB, NULL, + 0), + +UNUSUAL_DEV( 0x07c4, 0xa006, 0x0000, 0xffff, + "Simple Tech/Datafab", + "Simple Tech/Datafab CF+SM Reader", + US_SC_SCSI, US_PR_DATAFAB, NULL, + 0), + +/* Submitted by Olaf Hering */ +UNUSUAL_DEV( 0x07c4, 0xa109, 0x0000, 0xffff, + "Datafab Systems, Inc.", + "USB to CF + SM Combo (LC1)", + US_SC_SCSI, US_PR_DATAFAB, NULL, + 0), + +/* Reported by Felix Moeller + * in Germany this is sold by Hama with the productnumber 46952 + * as "DualSlot CompactFlash(TM) & MStick Drive USB" + */ +UNUSUAL_DEV( 0x07c4, 0xa10b, 0x0000, 0xffff, + "DataFab Systems Inc.", + "USB CF+MS", + US_SC_SCSI, US_PR_DATAFAB, NULL, + 0), + +UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff, + "Acomdata", + "CF", + US_SC_SCSI, US_PR_DATAFAB, NULL, + US_FL_SINGLE_LUN), + +#endif /* defined(CONFIG_USB_STORAGE_DATAFAB) || ... */ diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index eef2075..a5867c6 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -992,84 +992,6 @@ UNUSUAL_DEV( 0x07b4, 0x010a, 0x0102, 0x0102, US_SC_SCSI, US_PR_ALAUDA, init_alauda, 0 ), #endif -#ifdef CONFIG_USB_STORAGE_DATAFAB -UNUSUAL_DEV( 0x07c4, 0xa000, 0x0000, 0x0015, - "Datafab", - "MDCFE-B USB CF Reader", - US_SC_SCSI, US_PR_DATAFAB, NULL, - 0 ), - -/* - * The following Datafab-based devices may or may not work - * using the current driver...the 0xffff is arbitrary since I - * don't know what device versions exist for these guys. - * - * The 0xa003 and 0xa004 devices in particular I'm curious about. - * I'm told they exist but so far nobody has come forward to say that - * they work with this driver. Given the success we've had getting - * other Datafab-based cards operational with this driver, I've decided - * to leave these two devices in the list. - */ -UNUSUAL_DEV( 0x07c4, 0xa001, 0x0000, 0xffff, - "SIIG/Datafab", - "SIIG/Datafab Memory Stick+CF Reader/Writer", - US_SC_SCSI, US_PR_DATAFAB, NULL, - 0 ), - -/* Reported by Josef Reisinger */ -UNUSUAL_DEV( 0x07c4, 0xa002, 0x0000, 0xffff, - "Datafab/Unknown", - "MD2/MD3 Disk enclosure", - US_SC_SCSI, US_PR_DATAFAB, NULL, - US_FL_SINGLE_LUN ), - -UNUSUAL_DEV( 0x07c4, 0xa003, 0x0000, 0xffff, - "Datafab/Unknown", - "Datafab-based Reader", - US_SC_SCSI, US_PR_DATAFAB, NULL, - 0 ), - -UNUSUAL_DEV( 0x07c4, 0xa004, 0x0000, 0xffff, - "Datafab/Unknown", - "Datafab-based Reader", - US_SC_SCSI, US_PR_DATAFAB, NULL, - 0 ), - -UNUSUAL_DEV( 0x07c4, 0xa005, 0x0000, 0xffff, - "PNY/Datafab", - "PNY/Datafab CF+SM Reader", - US_SC_SCSI, US_PR_DATAFAB, NULL, - 0 ), - -UNUSUAL_DEV( 0x07c4, 0xa006, 0x0000, 0xffff, - "Simple Tech/Datafab", - "Simple Tech/Datafab CF+SM Reader", - US_SC_SCSI, US_PR_DATAFAB, NULL, - 0 ), -#endif - -#ifdef CONFIG_USB_STORAGE_DATAFAB -/* Submitted by Olaf Hering */ -UNUSUAL_DEV( 0x07c4, 0xa109, 0x0000, 0xffff, - "Datafab Systems, Inc.", - "USB to CF + SM Combo (LC1)", - US_SC_SCSI, US_PR_DATAFAB, NULL, - 0 ), -#endif - -#ifdef CONFIG_USB_STORAGE_DATAFAB -/* Reported by Felix Moeller - * in Germany this is sold by Hama with the productnumber 46952 - * as "DualSlot CompactFlash(TM) & MStick Drive USB" - */ -UNUSUAL_DEV( 0x07c4, 0xa10b, 0x0000, 0xffff, - "DataFab Systems Inc.", - "USB CF+MS", - US_SC_SCSI, US_PR_DATAFAB, NULL, - 0 ), - -#endif - /* Datafab KECF-USB / Sagatek DCS-CF / Simpletech Flashlink UCF-100 * Only revision 1.13 tested (same for all of the above devices, * based on the Datafab DF-UG-07 chip). Needed for US_FL_FIX_INQUIRY. @@ -1273,14 +1195,6 @@ UNUSUAL_DEV( 0x0bc2, 0x3010, 0x0000, 0x0000, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_SANE_SENSE ), -#ifdef CONFIG_USB_STORAGE_DATAFAB -UNUSUAL_DEV( 0x0c0b, 0xa109, 0x0000, 0xffff, - "Acomdata", - "CF", - US_SC_SCSI, US_PR_DATAFAB, NULL, - US_FL_SINGLE_LUN ), -#endif - UNUSUAL_DEV( 0x0d49, 0x7310, 0x0000, 0x9999, "Maxtor", "USB to SATA", diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 985275d..a537b35 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -66,9 +66,6 @@ #include "debug.h" #include "initializers.h" -#ifdef CONFIG_USB_STORAGE_DATAFAB -#include "datafab.h" -#endif #ifdef CONFIG_USB_STORAGE_JUMPSHOT #include "jumpshot.h" #endif @@ -604,15 +601,6 @@ static void get_transport(struct us_data *us) us->transport_reset = usb_stor_Bulk_reset; break; -#ifdef CONFIG_USB_STORAGE_DATAFAB - case US_PR_DATAFAB: - us->transport_name = "Datafab Bulk-Only"; - us->transport = datafab_transport; - us->transport_reset = usb_stor_Bulk_reset; - us->max_lun = 1; - break; -#endif - #ifdef CONFIG_USB_STORAGE_JUMPSHOT case US_PR_JUMPSHOT: us->transport_name = "Lexar Jumpshot Control/Bulk"; diff --git a/drivers/usb/storage/usual-tables.c b/drivers/usb/storage/usual-tables.c index a50f0ee..c6ceac6 100644 --- a/drivers/usb/storage/usual-tables.c +++ b/drivers/usb/storage/usual-tables.c @@ -78,6 +78,7 @@ struct ignore_entry { static struct ignore_entry ignore_ids[] = { # include "unusual_cypress.h" +# include "unusual_datafab.h" # include "unusual_freecom.h" # include "unusual_isd200.h" # include "unusual_sddr09.h" -- cgit v1.1 From a9fb6d05d59c9e118ad8c355adfdf88c970c61bc Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 12 Feb 2009 14:48:19 -0500 Subject: usb-storage: make jumpshot a separate module This patch (as1214) converts usb-storage's jumpshot subdriver into a separate module. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/Kconfig | 4 +- drivers/usb/storage/Makefile | 3 +- drivers/usb/storage/jumpshot.c | 99 +++++++++++++++++++++++++++++++++- drivers/usb/storage/jumpshot.h | 39 -------------- drivers/usb/storage/unusual_devs.h | 8 --- drivers/usb/storage/unusual_jumpshot.h | 27 ++++++++++ drivers/usb/storage/usb.c | 12 ----- drivers/usb/storage/usual-tables.c | 1 + 8 files changed, 130 insertions(+), 63 deletions(-) delete mode 100644 drivers/usb/storage/jumpshot.h create mode 100644 drivers/usb/storage/unusual_jumpshot.h (limited to 'drivers/usb') diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index 7dac413..43e1afe 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -110,12 +110,14 @@ config USB_STORAGE_SDDR55 If this driver is compiled as a module, it will be named ums-sddr55. config USB_STORAGE_JUMPSHOT - bool "Lexar Jumpshot Compact Flash Reader" + tristate "Lexar Jumpshot Compact Flash Reader" depends on USB_STORAGE help Say Y here to include additional code to support the Lexar Jumpshot USB CompactFlash reader. + If this driver is compiled as a module, it will be named ums-jumpshot. + config USB_STORAGE_ALAUDA bool "Olympus MAUSB-10/Fuji DPC-R1 support" depends on USB_STORAGE diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile index 0f78bd6..7b9d535 100644 --- a/drivers/usb/storage/Makefile +++ b/drivers/usb/storage/Makefile @@ -10,7 +10,6 @@ EXTRA_CFLAGS := -Idrivers/scsi obj-$(CONFIG_USB_STORAGE) += usb-storage.o usb-storage-obj-$(CONFIG_USB_STORAGE_DEBUG) += debug.o -usb-storage-obj-$(CONFIG_USB_STORAGE_JUMPSHOT) += jumpshot.o usb-storage-obj-$(CONFIG_USB_STORAGE_ALAUDA) += alauda.o usb-storage-obj-$(CONFIG_USB_STORAGE_ONETOUCH) += onetouch.o usb-storage-obj-$(CONFIG_USB_STORAGE_KARMA) += karma.o @@ -28,6 +27,7 @@ obj-$(CONFIG_USB_STORAGE_CYPRESS_ATACB) += ums-cypress.o obj-$(CONFIG_USB_STORAGE_DATAFAB) += ums-datafab.o obj-$(CONFIG_USB_STORAGE_FREECOM) += ums-freecom.o obj-$(CONFIG_USB_STORAGE_ISD200) += ums-isd200.o +obj-$(CONFIG_USB_STORAGE_JUMPSHOT) += ums-jumpshot.o obj-$(CONFIG_USB_STORAGE_SDDR09) += ums-sddr09.o obj-$(CONFIG_USB_STORAGE_SDDR55) += ums-sddr55.o obj-$(CONFIG_USB_STORAGE_USBAT) += ums-usbat.o @@ -36,6 +36,7 @@ ums-cypress-objs := cypress_atacb.o ums-datafab-objs := datafab.o ums-freecom-objs := freecom.o ums-isd200-objs := isd200.o +ums-jumpshot-objs := jumpshot.o ums-sddr09-objs := sddr09.o ums-sddr55-objs := sddr55.o ums-usbat-objs := shuttle_usbat.o diff --git a/drivers/usb/storage/jumpshot.c b/drivers/usb/storage/jumpshot.c index df67f13..a50d6dc 100644 --- a/drivers/usb/storage/jumpshot.c +++ b/drivers/usb/storage/jumpshot.c @@ -46,6 +46,7 @@ */ #include +#include #include #include @@ -55,9 +56,57 @@ #include "transport.h" #include "protocol.h" #include "debug.h" -#include "jumpshot.h" +/* + * The table of devices + */ +#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ + .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + +struct usb_device_id jumpshot_usb_ids[] = { +# include "unusual_jumpshot.h" + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, jumpshot_usb_ids); + +#undef UNUSUAL_DEV + +/* + * The flags table + */ +#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ + vendor_name, product_name, use_protocol, use_transport, \ + init_function, Flags) \ +{ \ + .vendorName = vendor_name, \ + .productName = product_name, \ + .useProtocol = use_protocol, \ + .useTransport = use_transport, \ + .initFunction = init_function, \ +} + +static struct us_unusual_dev jumpshot_unusual_dev_list[] = { +# include "unusual_jumpshot.h" + { } /* Terminating entry */ +}; + +#undef UNUSUAL_DEV + + +struct jumpshot_info { + unsigned long sectors; /* total sector count */ + unsigned long ssize; /* sector size in bytes */ + + /* the following aren't used yet */ + unsigned char sense_key; + unsigned long sense_asc; /* additional sense code */ + unsigned long sense_ascq; /* additional sense code qualifier */ +}; + static inline int jumpshot_bulk_read(struct us_data *us, unsigned char *data, unsigned int len) @@ -429,7 +478,7 @@ static void jumpshot_info_destructor(void *extra) // Transport for the Lexar 'Jumpshot' // -int jumpshot_transport(struct scsi_cmnd * srb, struct us_data *us) +static int jumpshot_transport(struct scsi_cmnd *srb, struct us_data *us) { struct jumpshot_info *info; int rc; @@ -592,3 +641,49 @@ int jumpshot_transport(struct scsi_cmnd * srb, struct us_data *us) info->sense_ascq = 0x00; return USB_STOR_TRANSPORT_FAILED; } + +static int jumpshot_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct us_data *us; + int result; + + result = usb_stor_probe1(&us, intf, id, + (id - jumpshot_usb_ids) + jumpshot_unusual_dev_list); + if (result) + return result; + + us->transport_name = "Lexar Jumpshot Control/Bulk"; + us->transport = jumpshot_transport; + us->transport_reset = usb_stor_Bulk_reset; + us->max_lun = 1; + + result = usb_stor_probe2(us); + return result; +} + +static struct usb_driver jumpshot_driver = { + .name = "ums-jumpshot", + .probe = jumpshot_probe, + .disconnect = usb_stor_disconnect, + .suspend = usb_stor_suspend, + .resume = usb_stor_resume, + .reset_resume = usb_stor_reset_resume, + .pre_reset = usb_stor_pre_reset, + .post_reset = usb_stor_post_reset, + .id_table = jumpshot_usb_ids, + .soft_unbind = 1, +}; + +static int __init jumpshot_init(void) +{ + return usb_register(&jumpshot_driver); +} + +static void __exit jumpshot_exit(void) +{ + usb_deregister(&jumpshot_driver); +} + +module_init(jumpshot_init); +module_exit(jumpshot_exit); diff --git a/drivers/usb/storage/jumpshot.h b/drivers/usb/storage/jumpshot.h deleted file mode 100644 index 19bac9d..0000000 --- a/drivers/usb/storage/jumpshot.h +++ /dev/null @@ -1,39 +0,0 @@ -/* Driver for Lexar "Jumpshot" USB Compact Flash reader - * Header File - * - * Current development and maintenance by: - * (c) 2000 Jimmie Mayfield (mayfield+usb@sackheads.org) - * - * See jumpshot.c for more explanation - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2, or (at your option) any - * later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef _USB_JUMPSHOT_H -#define _USB_JUMPSHOT_H - -extern int jumpshot_transport(struct scsi_cmnd *srb, struct us_data *us); - -struct jumpshot_info { - unsigned long sectors; // total sector count - unsigned long ssize; // sector size in bytes - - // the following aren't used yet - unsigned char sense_key; - unsigned long sense_asc; // additional sense code - unsigned long sense_ascq; // additional sense code qualifier -}; - -#endif diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index a5867c6..24e23c29 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -794,14 +794,6 @@ UNUSUAL_DEV( 0x05c6, 0x1000, 0x0000, 0x9999, US_SC_DEVICE, US_PR_DEVICE, option_ms_init, 0), -#ifdef CONFIG_USB_STORAGE_JUMPSHOT -UNUSUAL_DEV( 0x05dc, 0x0001, 0x0000, 0x0001, - "Lexar", - "Jumpshot USB CF Reader", - US_SC_SCSI, US_PR_JUMPSHOT, NULL, - US_FL_NEED_OVERRIDE ), -#endif - /* Reported by Blake Matheny */ UNUSUAL_DEV( 0x05dc, 0xb002, 0x0000, 0x0113, "Lexar", diff --git a/drivers/usb/storage/unusual_jumpshot.h b/drivers/usb/storage/unusual_jumpshot.h new file mode 100644 index 0000000..2e549b1 --- /dev/null +++ b/drivers/usb/storage/unusual_jumpshot.h @@ -0,0 +1,27 @@ +/* Unusual Devices File for the Lexar "Jumpshot" Compact Flash reader + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#if defined(CONFIG_USB_STORAGE_JUMPSHOT) || \ + defined(CONFIG_USB_STORAGE_JUMPSHOT_MODULE) + +UNUSUAL_DEV( 0x05dc, 0x0001, 0x0000, 0x0001, + "Lexar", + "Jumpshot USB CF Reader", + US_SC_SCSI, US_PR_JUMPSHOT, NULL, + US_FL_NEED_OVERRIDE), + +#endif /* defined(CONFIG_USB_STORAGE_JUMPSHOT) || ... */ diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index a537b35..2ea5769 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -66,9 +66,6 @@ #include "debug.h" #include "initializers.h" -#ifdef CONFIG_USB_STORAGE_JUMPSHOT -#include "jumpshot.h" -#endif #ifdef CONFIG_USB_STORAGE_ONETOUCH #include "onetouch.h" #endif @@ -601,15 +598,6 @@ static void get_transport(struct us_data *us) us->transport_reset = usb_stor_Bulk_reset; break; -#ifdef CONFIG_USB_STORAGE_JUMPSHOT - case US_PR_JUMPSHOT: - us->transport_name = "Lexar Jumpshot Control/Bulk"; - us->transport = jumpshot_transport; - us->transport_reset = usb_stor_Bulk_reset; - us->max_lun = 1; - break; -#endif - #ifdef CONFIG_USB_STORAGE_ALAUDA case US_PR_ALAUDA: us->transport_name = "Alauda Control/Bulk"; diff --git a/drivers/usb/storage/usual-tables.c b/drivers/usb/storage/usual-tables.c index c6ceac6..182a097 100644 --- a/drivers/usb/storage/usual-tables.c +++ b/drivers/usb/storage/usual-tables.c @@ -81,6 +81,7 @@ static struct ignore_entry ignore_ids[] = { # include "unusual_datafab.h" # include "unusual_freecom.h" # include "unusual_isd200.h" +# include "unusual_jumpshot.h" # include "unusual_sddr09.h" # include "unusual_sddr55.h" # include "unusual_usbat.h" -- cgit v1.1 From a74bba3bf92cb6425789ae5050bdcca1283bc6f4 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 12 Feb 2009 14:48:22 -0500 Subject: usb-storage: make alauda a separate module This patch (as1215) converts usb-storage's alauda subdriver into a separate module. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/Kconfig | 4 +- drivers/usb/storage/Makefile | 3 +- drivers/usb/storage/alauda.c | 163 ++++++++++++++++++++++++++++++++++- drivers/usb/storage/alauda.h | 100 --------------------- drivers/usb/storage/unusual_alauda.h | 31 +++++++ drivers/usb/storage/unusual_devs.h | 14 --- drivers/usb/storage/usb.c | 12 --- drivers/usb/storage/usual-tables.c | 1 + 8 files changed, 197 insertions(+), 131 deletions(-) delete mode 100644 drivers/usb/storage/alauda.h create mode 100644 drivers/usb/storage/unusual_alauda.h (limited to 'drivers/usb') diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index 43e1afe..c56c2c6 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -119,7 +119,7 @@ config USB_STORAGE_JUMPSHOT If this driver is compiled as a module, it will be named ums-jumpshot. config USB_STORAGE_ALAUDA - bool "Olympus MAUSB-10/Fuji DPC-R1 support" + tristate "Olympus MAUSB-10/Fuji DPC-R1 support" depends on USB_STORAGE help Say Y here to include additional code to support the Olympus MAUSB-10 @@ -128,6 +128,8 @@ config USB_STORAGE_ALAUDA These devices are based on the Alauda chip and support both XD and SmartMedia cards. + If this driver is compiled as a module, it will be named ums-alauda. + config USB_STORAGE_ONETOUCH bool "Support OneTouch Button on Maxtor Hard Drives" depends on USB_STORAGE diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile index 7b9d535..fea05c0 100644 --- a/drivers/usb/storage/Makefile +++ b/drivers/usb/storage/Makefile @@ -10,7 +10,6 @@ EXTRA_CFLAGS := -Idrivers/scsi obj-$(CONFIG_USB_STORAGE) += usb-storage.o usb-storage-obj-$(CONFIG_USB_STORAGE_DEBUG) += debug.o -usb-storage-obj-$(CONFIG_USB_STORAGE_ALAUDA) += alauda.o usb-storage-obj-$(CONFIG_USB_STORAGE_ONETOUCH) += onetouch.o usb-storage-obj-$(CONFIG_USB_STORAGE_KARMA) += karma.o @@ -23,6 +22,7 @@ else obj-$(CONFIG_USB) += libusual.o usual-tables.o endif +obj-$(CONFIG_USB_STORAGE_ALAUDA) += ums-alauda.o obj-$(CONFIG_USB_STORAGE_CYPRESS_ATACB) += ums-cypress.o obj-$(CONFIG_USB_STORAGE_DATAFAB) += ums-datafab.o obj-$(CONFIG_USB_STORAGE_FREECOM) += ums-freecom.o @@ -32,6 +32,7 @@ obj-$(CONFIG_USB_STORAGE_SDDR09) += ums-sddr09.o obj-$(CONFIG_USB_STORAGE_SDDR55) += ums-sddr55.o obj-$(CONFIG_USB_STORAGE_USBAT) += ums-usbat.o +ums-alauda-objs := alauda.o ums-cypress-objs := cypress_atacb.o ums-datafab-objs := datafab.o ums-freecom-objs := freecom.o diff --git a/drivers/usb/storage/alauda.c b/drivers/usb/storage/alauda.c index 5407411..d3a88eb 100644 --- a/drivers/usb/storage/alauda.c +++ b/drivers/usb/storage/alauda.c @@ -31,6 +31,8 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include + #include #include #include @@ -39,7 +41,75 @@ #include "transport.h" #include "protocol.h" #include "debug.h" -#include "alauda.h" + +/* + * Status bytes + */ +#define ALAUDA_STATUS_ERROR 0x01 +#define ALAUDA_STATUS_READY 0x40 + +/* + * Control opcodes (for request field) + */ +#define ALAUDA_GET_XD_MEDIA_STATUS 0x08 +#define ALAUDA_GET_SM_MEDIA_STATUS 0x98 +#define ALAUDA_ACK_XD_MEDIA_CHANGE 0x0a +#define ALAUDA_ACK_SM_MEDIA_CHANGE 0x9a +#define ALAUDA_GET_XD_MEDIA_SIG 0x86 +#define ALAUDA_GET_SM_MEDIA_SIG 0x96 + +/* + * Bulk command identity (byte 0) + */ +#define ALAUDA_BULK_CMD 0x40 + +/* + * Bulk opcodes (byte 1) + */ +#define ALAUDA_BULK_GET_REDU_DATA 0x85 +#define ALAUDA_BULK_READ_BLOCK 0x94 +#define ALAUDA_BULK_ERASE_BLOCK 0xa3 +#define ALAUDA_BULK_WRITE_BLOCK 0xb4 +#define ALAUDA_BULK_GET_STATUS2 0xb7 +#define ALAUDA_BULK_RESET_MEDIA 0xe0 + +/* + * Port to operate on (byte 8) + */ +#define ALAUDA_PORT_XD 0x00 +#define ALAUDA_PORT_SM 0x01 + +/* + * LBA and PBA are unsigned ints. Special values. + */ +#define UNDEF 0xffff +#define SPARE 0xfffe +#define UNUSABLE 0xfffd + +struct alauda_media_info { + unsigned long capacity; /* total media size in bytes */ + unsigned int pagesize; /* page size in bytes */ + unsigned int blocksize; /* number of pages per block */ + unsigned int uzonesize; /* number of usable blocks per zone */ + unsigned int zonesize; /* number of blocks per zone */ + unsigned int blockmask; /* mask to get page from address */ + + unsigned char pageshift; + unsigned char blockshift; + unsigned char zoneshift; + + u16 **lba_to_pba; /* logical to physical block map */ + u16 **pba_to_lba; /* physical to logical block map */ +}; + +struct alauda_info { + struct alauda_media_info port[2]; + int wr_ep; /* endpoint to write data out of */ + + unsigned char sense_key; + unsigned long sense_asc; /* additional sense code */ + unsigned long sense_ascq; /* additional sense code qualifier */ +}; #define short_pack(lsb,msb) ( ((u16)(lsb)) | ( ((u16)(msb))<<8 ) ) #define LSB_of(s) ((s)&0xFF) @@ -52,6 +122,48 @@ #define PBA_HI(pba) (pba >> 3) #define PBA_ZONE(pba) (pba >> 11) +static int init_alauda(struct us_data *us); + + +/* + * The table of devices + */ +#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ + .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + +struct usb_device_id alauda_usb_ids[] = { +# include "unusual_alauda.h" + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, alauda_usb_ids); + +#undef UNUSUAL_DEV + +/* + * The flags table + */ +#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ + vendor_name, product_name, use_protocol, use_transport, \ + init_function, Flags) \ +{ \ + .vendorName = vendor_name, \ + .productName = product_name, \ + .useProtocol = use_protocol, \ + .useTransport = use_transport, \ + .initFunction = init_function, \ +} + +static struct us_unusual_dev alauda_unusual_dev_list[] = { +# include "unusual_alauda.h" + { } /* Terminating entry */ +}; + +#undef UNUSUAL_DEV + + /* * Media handling */ @@ -998,7 +1110,7 @@ static void alauda_info_destructor(void *extra) /* * Initialize alauda_info struct and find the data-write endpoint */ -int init_alauda(struct us_data *us) +static int init_alauda(struct us_data *us) { struct alauda_info *info; struct usb_host_interface *altsetting = us->pusb_intf->cur_altsetting; @@ -1020,7 +1132,7 @@ int init_alauda(struct us_data *us) return USB_STOR_TRANSPORT_GOOD; } -int alauda_transport(struct scsi_cmnd *srb, struct us_data *us) +static int alauda_transport(struct scsi_cmnd *srb, struct us_data *us) { int rc; struct alauda_info *info = (struct alauda_info *) us->extra; @@ -1128,3 +1240,48 @@ int alauda_transport(struct scsi_cmnd *srb, struct us_data *us) return USB_STOR_TRANSPORT_FAILED; } +static int alauda_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct us_data *us; + int result; + + result = usb_stor_probe1(&us, intf, id, + (id - alauda_usb_ids) + alauda_unusual_dev_list); + if (result) + return result; + + us->transport_name = "Alauda Control/Bulk"; + us->transport = alauda_transport; + us->transport_reset = usb_stor_Bulk_reset; + us->max_lun = 1; + + result = usb_stor_probe2(us); + return result; +} + +static struct usb_driver alauda_driver = { + .name = "ums-alauda", + .probe = alauda_probe, + .disconnect = usb_stor_disconnect, + .suspend = usb_stor_suspend, + .resume = usb_stor_resume, + .reset_resume = usb_stor_reset_resume, + .pre_reset = usb_stor_pre_reset, + .post_reset = usb_stor_post_reset, + .id_table = alauda_usb_ids, + .soft_unbind = 1, +}; + +static int __init alauda_init(void) +{ + return usb_register(&alauda_driver); +} + +static void __exit alauda_exit(void) +{ + usb_deregister(&alauda_driver); +} + +module_init(alauda_init); +module_exit(alauda_exit); diff --git a/drivers/usb/storage/alauda.h b/drivers/usb/storage/alauda.h deleted file mode 100644 index a700f87..0000000 --- a/drivers/usb/storage/alauda.h +++ /dev/null @@ -1,100 +0,0 @@ -/* - * Driver for Alauda-based card readers - * - * Current development and maintenance by: - * (c) 2005 Daniel Drake - * - * See alauda.c for more explanation. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2, or (at your option) any - * later version. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef _USB_ALAUDA_H -#define _USB_ALAUDA_H - -/* - * Status bytes - */ -#define ALAUDA_STATUS_ERROR 0x01 -#define ALAUDA_STATUS_READY 0x40 - -/* - * Control opcodes (for request field) - */ -#define ALAUDA_GET_XD_MEDIA_STATUS 0x08 -#define ALAUDA_GET_SM_MEDIA_STATUS 0x98 -#define ALAUDA_ACK_XD_MEDIA_CHANGE 0x0a -#define ALAUDA_ACK_SM_MEDIA_CHANGE 0x9a -#define ALAUDA_GET_XD_MEDIA_SIG 0x86 -#define ALAUDA_GET_SM_MEDIA_SIG 0x96 - -/* - * Bulk command identity (byte 0) - */ -#define ALAUDA_BULK_CMD 0x40 - -/* - * Bulk opcodes (byte 1) - */ -#define ALAUDA_BULK_GET_REDU_DATA 0x85 -#define ALAUDA_BULK_READ_BLOCK 0x94 -#define ALAUDA_BULK_ERASE_BLOCK 0xa3 -#define ALAUDA_BULK_WRITE_BLOCK 0xb4 -#define ALAUDA_BULK_GET_STATUS2 0xb7 -#define ALAUDA_BULK_RESET_MEDIA 0xe0 - -/* - * Port to operate on (byte 8) - */ -#define ALAUDA_PORT_XD 0x00 -#define ALAUDA_PORT_SM 0x01 - -/* - * LBA and PBA are unsigned ints. Special values. - */ -#define UNDEF 0xffff -#define SPARE 0xfffe -#define UNUSABLE 0xfffd - -int init_alauda(struct us_data *us); -int alauda_transport(struct scsi_cmnd *srb, struct us_data *us); - -struct alauda_media_info { - unsigned long capacity; /* total media size in bytes */ - unsigned int pagesize; /* page size in bytes */ - unsigned int blocksize; /* number of pages per block */ - unsigned int uzonesize; /* number of usable blocks per zone */ - unsigned int zonesize; /* number of blocks per zone */ - unsigned int blockmask; /* mask to get page from address */ - - unsigned char pageshift; - unsigned char blockshift; - unsigned char zoneshift; - - u16 **lba_to_pba; /* logical to physical block map */ - u16 **pba_to_lba; /* physical to logical block map */ -}; - -struct alauda_info { - struct alauda_media_info port[2]; - int wr_ep; /* endpoint to write data out of */ - - unsigned char sense_key; - unsigned long sense_asc; /* additional sense code */ - unsigned long sense_ascq; /* additional sense code qualifier */ -}; - -#endif - diff --git a/drivers/usb/storage/unusual_alauda.h b/drivers/usb/storage/unusual_alauda.h new file mode 100644 index 0000000..8c412f8 --- /dev/null +++ b/drivers/usb/storage/unusual_alauda.h @@ -0,0 +1,31 @@ +/* Unusual Devices File for the Alauda-based card readers + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#if defined(CONFIG_USB_STORAGE_ALAUDA) || \ + defined(CONFIG_USB_STORAGE_ALAUDA_MODULE) + +UNUSUAL_DEV( 0x0584, 0x0008, 0x0102, 0x0102, + "Fujifilm", + "DPC-R1 (Alauda)", + US_SC_SCSI, US_PR_ALAUDA, init_alauda, 0), + +UNUSUAL_DEV( 0x07b4, 0x010a, 0x0102, 0x0102, + "Olympus", + "MAUSB-10 (Alauda)", + US_SC_SCSI, US_PR_ALAUDA, init_alauda, 0), + +#endif /* defined(CONFIG_USB_STORAGE_ALAUDA) || ... */ diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 24e23c29..bcdb74d 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -692,13 +692,6 @@ UNUSUAL_DEV( 0x057b, 0x0022, 0x0000, 0x9999, "Silicon Media R/W", US_SC_DEVICE, US_PR_DEVICE, NULL, 0), -#ifdef CONFIG_USB_STORAGE_ALAUDA -UNUSUAL_DEV( 0x0584, 0x0008, 0x0102, 0x0102, - "Fujifilm", - "DPC-R1 (Alauda)", - US_SC_SCSI, US_PR_ALAUDA, init_alauda, 0 ), -#endif - /* Reported by RTE */ UNUSUAL_DEV( 0x058f, 0x6387, 0x0141, 0x0141, "JetFlash", @@ -977,13 +970,6 @@ UNUSUAL_DEV( 0x07af, 0x0006, 0x0100, 0x0100, US_FL_SINGLE_LUN ), #endif -#ifdef CONFIG_USB_STORAGE_ALAUDA -UNUSUAL_DEV( 0x07b4, 0x010a, 0x0102, 0x0102, - "Olympus", - "MAUSB-10 (Alauda)", - US_SC_SCSI, US_PR_ALAUDA, init_alauda, 0 ), -#endif - /* Datafab KECF-USB / Sagatek DCS-CF / Simpletech Flashlink UCF-100 * Only revision 1.13 tested (same for all of the above devices, * based on the Datafab DF-UG-07 chip). Needed for US_FL_FIX_INQUIRY. diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 2ea5769..cd039c0 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -69,9 +69,6 @@ #ifdef CONFIG_USB_STORAGE_ONETOUCH #include "onetouch.h" #endif -#ifdef CONFIG_USB_STORAGE_ALAUDA -#include "alauda.h" -#endif #ifdef CONFIG_USB_STORAGE_KARMA #include "karma.h" #endif @@ -598,15 +595,6 @@ static void get_transport(struct us_data *us) us->transport_reset = usb_stor_Bulk_reset; break; -#ifdef CONFIG_USB_STORAGE_ALAUDA - case US_PR_ALAUDA: - us->transport_name = "Alauda Control/Bulk"; - us->transport = alauda_transport; - us->transport_reset = usb_stor_Bulk_reset; - us->max_lun = 1; - break; -#endif - #ifdef CONFIG_USB_STORAGE_KARMA case US_PR_KARMA: us->transport_name = "Rio Karma/Bulk"; diff --git a/drivers/usb/storage/usual-tables.c b/drivers/usb/storage/usual-tables.c index 182a097..ad102e8 100644 --- a/drivers/usb/storage/usual-tables.c +++ b/drivers/usb/storage/usual-tables.c @@ -77,6 +77,7 @@ struct ignore_entry { } static struct ignore_entry ignore_ids[] = { +# include "unusual_alauda.h" # include "unusual_cypress.h" # include "unusual_datafab.h" # include "unusual_freecom.h" -- cgit v1.1 From c10337846c93bd914dd3003ffb001adc583b313e Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 12 Feb 2009 14:48:26 -0500 Subject: usb-storage: make karma a separate module This patch (as1216) converts usb-storage's karma subdriver into a separate module. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/Kconfig | 4 +- drivers/usb/storage/Makefile | 3 +- drivers/usb/storage/karma.c | 96 +++++++++++++++++++++++++++++++++++-- drivers/usb/storage/karma.h | 7 --- drivers/usb/storage/unusual_devs.h | 7 --- drivers/usb/storage/unusual_karma.h | 26 ++++++++++ drivers/usb/storage/usb.c | 12 ----- drivers/usb/storage/usual-tables.c | 1 + 8 files changed, 123 insertions(+), 33 deletions(-) delete mode 100644 drivers/usb/storage/karma.h create mode 100644 drivers/usb/storage/unusual_karma.h (limited to 'drivers/usb') diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index c56c2c6..8adece1 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -144,7 +144,7 @@ config USB_STORAGE_ONETOUCH cuts) config USB_STORAGE_KARMA - bool "Support for Rio Karma music player" + tristate "Support for Rio Karma music player" depends on USB_STORAGE help Say Y here to include additional code to support the Rio Karma @@ -155,6 +155,8 @@ config USB_STORAGE_KARMA on the resulting scsi device node returns the Karma to normal operation. + If this driver is compiled as a module, it will be named ums-karma. + config USB_STORAGE_CYPRESS_ATACB tristate "SAT emulation on Cypress USB/ATA Bridge with ATACB" depends on USB_STORAGE diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile index fea05c0..870680e 100644 --- a/drivers/usb/storage/Makefile +++ b/drivers/usb/storage/Makefile @@ -11,7 +11,6 @@ obj-$(CONFIG_USB_STORAGE) += usb-storage.o usb-storage-obj-$(CONFIG_USB_STORAGE_DEBUG) += debug.o usb-storage-obj-$(CONFIG_USB_STORAGE_ONETOUCH) += onetouch.o -usb-storage-obj-$(CONFIG_USB_STORAGE_KARMA) += karma.o usb-storage-objs := scsiglue.o protocol.o transport.o usb.o \ initializers.o sierra_ms.o option_ms.o $(usb-storage-obj-y) @@ -28,6 +27,7 @@ obj-$(CONFIG_USB_STORAGE_DATAFAB) += ums-datafab.o obj-$(CONFIG_USB_STORAGE_FREECOM) += ums-freecom.o obj-$(CONFIG_USB_STORAGE_ISD200) += ums-isd200.o obj-$(CONFIG_USB_STORAGE_JUMPSHOT) += ums-jumpshot.o +obj-$(CONFIG_USB_STORAGE_KARMA) += ums-karma.o obj-$(CONFIG_USB_STORAGE_SDDR09) += ums-sddr09.o obj-$(CONFIG_USB_STORAGE_SDDR55) += ums-sddr55.o obj-$(CONFIG_USB_STORAGE_USBAT) += ums-usbat.o @@ -38,6 +38,7 @@ ums-datafab-objs := datafab.o ums-freecom-objs := freecom.o ums-isd200-objs := isd200.o ums-jumpshot-objs := jumpshot.o +ums-karma-objs := karma.o ums-sddr09-objs := sddr09.o ums-sddr55-objs := sddr55.o ums-usbat-objs := shuttle_usbat.o diff --git a/drivers/usb/storage/karma.c b/drivers/usb/storage/karma.c index 0d79ae5..cfb8e60 100644 --- a/drivers/usb/storage/karma.c +++ b/drivers/usb/storage/karma.c @@ -18,6 +18,8 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include + #include #include #include @@ -25,7 +27,6 @@ #include "usb.h" #include "transport.h" #include "debug.h" -#include "karma.h" #define RIO_PREFIX "RIOP\x00" #define RIO_PREFIX_LEN 5 @@ -36,13 +37,53 @@ #define RIO_LEAVE_STORAGE 0x2 #define RIO_RESET 0xC -extern int usb_stor_Bulk_transport(struct scsi_cmnd *, struct us_data *); - struct karma_data { int in_storage; char *recv; }; +static int rio_karma_init(struct us_data *us); + + +/* + * The table of devices + */ +#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ + .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + +struct usb_device_id karma_usb_ids[] = { +# include "unusual_karma.h" + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, karma_usb_ids); + +#undef UNUSUAL_DEV + +/* + * The flags table + */ +#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ + vendor_name, product_name, use_protocol, use_transport, \ + init_function, Flags) \ +{ \ + .vendorName = vendor_name, \ + .productName = product_name, \ + .useProtocol = use_protocol, \ + .useTransport = use_transport, \ + .initFunction = init_function, \ +} + +static struct us_unusual_dev karma_unusual_dev_list[] = { +# include "unusual_karma.h" + { } /* Terminating entry */ +}; + +#undef UNUSUAL_DEV + + /* * Send commands to Rio Karma. * @@ -104,7 +145,7 @@ err: * Trap START_STOP and READ_10 to leave/re-enter storage mode. * Everything else is propagated to the normal bulk layer. */ -int rio_karma_transport(struct scsi_cmnd *srb, struct us_data *us) +static int rio_karma_transport(struct scsi_cmnd *srb, struct us_data *us) { int ret; struct karma_data *data = (struct karma_data *) us->extra; @@ -133,7 +174,7 @@ static void rio_karma_destructor(void *extra) kfree(data->recv); } -int rio_karma_init(struct us_data *us) +static int rio_karma_init(struct us_data *us) { int ret = 0; struct karma_data *data = kzalloc(sizeof(struct karma_data), GFP_NOIO); @@ -153,3 +194,48 @@ int rio_karma_init(struct us_data *us) out: return ret; } + +static int karma_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct us_data *us; + int result; + + result = usb_stor_probe1(&us, intf, id, + (id - karma_usb_ids) + karma_unusual_dev_list); + if (result) + return result; + + us->transport_name = "Rio Karma/Bulk"; + us->transport = rio_karma_transport; + us->transport_reset = usb_stor_Bulk_reset; + + result = usb_stor_probe2(us); + return result; +} + +static struct usb_driver karma_driver = { + .name = "ums-karma", + .probe = karma_probe, + .disconnect = usb_stor_disconnect, + .suspend = usb_stor_suspend, + .resume = usb_stor_resume, + .reset_resume = usb_stor_reset_resume, + .pre_reset = usb_stor_pre_reset, + .post_reset = usb_stor_post_reset, + .id_table = karma_usb_ids, + .soft_unbind = 1, +}; + +static int __init karma_init(void) +{ + return usb_register(&karma_driver); +} + +static void __exit karma_exit(void) +{ + usb_deregister(&karma_driver); +} + +module_init(karma_init); +module_exit(karma_exit); diff --git a/drivers/usb/storage/karma.h b/drivers/usb/storage/karma.h deleted file mode 100644 index 8a60972..0000000 --- a/drivers/usb/storage/karma.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef _KARMA_USB_H -#define _KARMA_USB_H - -extern int rio_karma_init(struct us_data *us); -extern int rio_karma_transport(struct scsi_cmnd *srb, struct us_data *us); - -#endif diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index bcdb74d..83e34a6 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -276,13 +276,6 @@ UNUSUAL_DEV( 0x0457, 0x0151, 0x0100, 0x0100, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ), -#ifdef CONFIG_USB_STORAGE_KARMA -UNUSUAL_DEV( 0x045a, 0x5210, 0x0101, 0x0101, - "Rio", - "Rio Karma", - US_SC_SCSI, US_PR_KARMA, rio_karma_init, 0), -#endif - /* Reported by Tamas Kerecsen * Obviously the PROM has not been customized by the VAR; * the Vendor and Product string descriptors are: diff --git a/drivers/usb/storage/unusual_karma.h b/drivers/usb/storage/unusual_karma.h new file mode 100644 index 0000000..12ae3a0 --- /dev/null +++ b/drivers/usb/storage/unusual_karma.h @@ -0,0 +1,26 @@ +/* Unusual Devices File for the Rio Karma + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#if defined(CONFIG_USB_STORAGE_KARMA) || \ + defined(CONFIG_USB_STORAGE_KARMA_MODULE) + +UNUSUAL_DEV( 0x045a, 0x5210, 0x0101, 0x0101, + "Rio", + "Rio Karma", + US_SC_SCSI, US_PR_KARMA, rio_karma_init, 0), + +#endif /* defined(CONFIG_USB_STORAGE_KARMA) || ... */ diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index cd039c0..c5abf9b 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -69,9 +69,6 @@ #ifdef CONFIG_USB_STORAGE_ONETOUCH #include "onetouch.h" #endif -#ifdef CONFIG_USB_STORAGE_KARMA -#include "karma.h" -#endif #include "sierra_ms.h" #include "option_ms.h" @@ -594,15 +591,6 @@ static void get_transport(struct us_data *us) us->transport = usb_stor_Bulk_transport; us->transport_reset = usb_stor_Bulk_reset; break; - -#ifdef CONFIG_USB_STORAGE_KARMA - case US_PR_KARMA: - us->transport_name = "Rio Karma/Bulk"; - us->transport = rio_karma_transport; - us->transport_reset = usb_stor_Bulk_reset; - break; -#endif - } } diff --git a/drivers/usb/storage/usual-tables.c b/drivers/usb/storage/usual-tables.c index ad102e8..bce086f 100644 --- a/drivers/usb/storage/usual-tables.c +++ b/drivers/usb/storage/usual-tables.c @@ -83,6 +83,7 @@ static struct ignore_entry ignore_ids[] = { # include "unusual_freecom.h" # include "unusual_isd200.h" # include "unusual_jumpshot.h" +# include "unusual_karma.h" # include "unusual_sddr09.h" # include "unusual_sddr55.h" # include "unusual_usbat.h" -- cgit v1.1 From 9cfb95ef72c637bc9b90260e0f98a23f3f49b1bb Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 12 Feb 2009 14:48:33 -0500 Subject: usb-storage: make onetouch a separate module This patch (as1217) converts usb-storage's onetouch subdriver into a separate module. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/Kconfig | 4 +- drivers/usb/storage/Makefile | 3 +- drivers/usb/storage/onetouch.c | 90 +++++++++++++++++++++++++++++++++- drivers/usb/storage/onetouch.h | 9 ---- drivers/usb/storage/unusual_devs.h | 17 ------- drivers/usb/storage/unusual_onetouch.h | 36 ++++++++++++++ drivers/usb/storage/usb.c | 3 -- drivers/usb/storage/usual-tables.c | 1 + 8 files changed, 130 insertions(+), 33 deletions(-) delete mode 100644 drivers/usb/storage/onetouch.h create mode 100644 drivers/usb/storage/unusual_onetouch.h (limited to 'drivers/usb') diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index 8adece1..8a372ba 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -131,7 +131,7 @@ config USB_STORAGE_ALAUDA If this driver is compiled as a module, it will be named ums-alauda. config USB_STORAGE_ONETOUCH - bool "Support OneTouch Button on Maxtor Hard Drives" + tristate "Support OneTouch Button on Maxtor Hard Drives" depends on USB_STORAGE depends on INPUT=y || INPUT=USB_STORAGE help @@ -143,6 +143,8 @@ config USB_STORAGE_ONETOUCH this input in any keybinding software. (e.g. gnome's keyboard short- cuts) + If this driver is compiled as a module, it will be named ums-onetouch. + config USB_STORAGE_KARMA tristate "Support for Rio Karma music player" depends on USB_STORAGE diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile index 870680e..5be54c0 100644 --- a/drivers/usb/storage/Makefile +++ b/drivers/usb/storage/Makefile @@ -10,7 +10,6 @@ EXTRA_CFLAGS := -Idrivers/scsi obj-$(CONFIG_USB_STORAGE) += usb-storage.o usb-storage-obj-$(CONFIG_USB_STORAGE_DEBUG) += debug.o -usb-storage-obj-$(CONFIG_USB_STORAGE_ONETOUCH) += onetouch.o usb-storage-objs := scsiglue.o protocol.o transport.o usb.o \ initializers.o sierra_ms.o option_ms.o $(usb-storage-obj-y) @@ -28,6 +27,7 @@ obj-$(CONFIG_USB_STORAGE_FREECOM) += ums-freecom.o obj-$(CONFIG_USB_STORAGE_ISD200) += ums-isd200.o obj-$(CONFIG_USB_STORAGE_JUMPSHOT) += ums-jumpshot.o obj-$(CONFIG_USB_STORAGE_KARMA) += ums-karma.o +obj-$(CONFIG_USB_STORAGE_ONETOUCH) += ums-onetouch.o obj-$(CONFIG_USB_STORAGE_SDDR09) += ums-sddr09.o obj-$(CONFIG_USB_STORAGE_SDDR55) += ums-sddr55.o obj-$(CONFIG_USB_STORAGE_USBAT) += ums-usbat.o @@ -39,6 +39,7 @@ ums-freecom-objs := freecom.o ums-isd200-objs := isd200.o ums-jumpshot-objs := jumpshot.o ums-karma-objs := karma.o +ums-onetouch-objs := onetouch.o ums-sddr09-objs := sddr09.o ums-sddr55-objs := sddr55.o ums-usbat-objs := shuttle_usbat.o diff --git a/drivers/usb/storage/onetouch.c b/drivers/usb/storage/onetouch.c index c7bf895..8bd0956 100644 --- a/drivers/usb/storage/onetouch.c +++ b/drivers/usb/storage/onetouch.c @@ -35,9 +35,12 @@ #include #include #include "usb.h" -#include "onetouch.h" #include "debug.h" +#define ONETOUCH_PKT_LEN 0x02 +#define ONETOUCH_BUTTON KEY_PROG1 + +static int onetouch_connect_input(struct us_data *ss); static void onetouch_release_input(void *onetouch_); struct usb_onetouch { @@ -52,6 +55,46 @@ struct usb_onetouch { unsigned int is_open:1; }; + +/* + * The table of devices + */ +#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ + .driver_info = (flags)|(USB_US_TYPE_STOR<<24) } + +struct usb_device_id onetouch_usb_ids[] = { +# include "unusual_onetouch.h" + { } /* Terminating entry */ +}; +MODULE_DEVICE_TABLE(usb, onetouch_usb_ids); + +#undef UNUSUAL_DEV + +/* + * The flags table + */ +#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \ + vendor_name, product_name, use_protocol, use_transport, \ + init_function, Flags) \ +{ \ + .vendorName = vendor_name, \ + .productName = product_name, \ + .useProtocol = use_protocol, \ + .useTransport = use_transport, \ + .initFunction = init_function, \ +} + +static struct us_unusual_dev onetouch_unusual_dev_list[] = { +# include "unusual_onetouch.h" + { } /* Terminating entry */ +}; + +#undef UNUSUAL_DEV + + static void usb_onetouch_irq(struct urb *urb) { struct usb_onetouch *onetouch = urb->context; @@ -127,7 +170,7 @@ static void usb_onetouch_pm_hook(struct us_data *us, int action) } #endif /* CONFIG_PM */ -int onetouch_connect_input(struct us_data *ss) +static int onetouch_connect_input(struct us_data *ss) { struct usb_device *udev = ss->pusb_dev; struct usb_host_interface *interface; @@ -236,3 +279,46 @@ static void onetouch_release_input(void *onetouch_) onetouch->data, onetouch->data_dma); } } + +static int onetouch_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct us_data *us; + int result; + + result = usb_stor_probe1(&us, intf, id, + (id - onetouch_usb_ids) + onetouch_unusual_dev_list); + if (result) + return result; + + /* Use default transport and protocol */ + + result = usb_stor_probe2(us); + return result; +} + +static struct usb_driver onetouch_driver = { + .name = "ums-onetouch", + .probe = onetouch_probe, + .disconnect = usb_stor_disconnect, + .suspend = usb_stor_suspend, + .resume = usb_stor_resume, + .reset_resume = usb_stor_reset_resume, + .pre_reset = usb_stor_pre_reset, + .post_reset = usb_stor_post_reset, + .id_table = onetouch_usb_ids, + .soft_unbind = 1, +}; + +static int __init onetouch_init(void) +{ + return usb_register(&onetouch_driver); +} + +static void __exit onetouch_exit(void) +{ + usb_deregister(&onetouch_driver); +} + +module_init(onetouch_init); +module_exit(onetouch_exit); diff --git a/drivers/usb/storage/onetouch.h b/drivers/usb/storage/onetouch.h deleted file mode 100644 index 41c7aa8..0000000 --- a/drivers/usb/storage/onetouch.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef _ONETOUCH_H_ -#define _ONETOUCH_H_ - -#define ONETOUCH_PKT_LEN 0x02 -#define ONETOUCH_BUTTON KEY_PROG1 - -int onetouch_connect_input(struct us_data *ss); - -#endif diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 83e34a6..1c1f643 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -1182,23 +1182,6 @@ UNUSUAL_DEV( 0x0c45, 0x1060, 0x0100, 0x0100, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_SINGLE_LUN ), -/* Submitted by: Nick Sillik - * Needed for OneTouch extension to usb-storage - * - */ -#ifdef CONFIG_USB_STORAGE_ONETOUCH - UNUSUAL_DEV( 0x0d49, 0x7000, 0x0000, 0x9999, - "Maxtor", - "OneTouch External Harddrive", - US_SC_DEVICE, US_PR_DEVICE, onetouch_connect_input, - 0), - UNUSUAL_DEV( 0x0d49, 0x7010, 0x0000, 0x9999, - "Maxtor", - "OneTouch External Harddrive", - US_SC_DEVICE, US_PR_DEVICE, onetouch_connect_input, - 0), -#endif - /* Submitted by Joris Struyve */ UNUSUAL_DEV( 0x0d96, 0x410a, 0x0001, 0xffff, "Medion", diff --git a/drivers/usb/storage/unusual_onetouch.h b/drivers/usb/storage/unusual_onetouch.h new file mode 100644 index 0000000..bd9306b --- /dev/null +++ b/drivers/usb/storage/unusual_onetouch.h @@ -0,0 +1,36 @@ +/* Unusual Devices File for the Maxtor OneTouch USB hard drive's button + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#if defined(CONFIG_USB_STORAGE_ONETOUCH) || \ + defined(CONFIG_USB_STORAGE_ONETOUCH_MODULE) + +/* Submitted by: Nick Sillik + * Needed for OneTouch extension to usb-storage + */ +UNUSUAL_DEV( 0x0d49, 0x7000, 0x0000, 0x9999, + "Maxtor", + "OneTouch External Harddrive", + US_SC_DEVICE, US_PR_DEVICE, onetouch_connect_input, + 0), + +UNUSUAL_DEV( 0x0d49, 0x7010, 0x0000, 0x9999, + "Maxtor", + "OneTouch External Harddrive", + US_SC_DEVICE, US_PR_DEVICE, onetouch_connect_input, + 0), + +#endif /* defined(CONFIG_USB_STORAGE_ONETOUCH) || ... */ diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index c5abf9b..8060b85 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -66,9 +66,6 @@ #include "debug.h" #include "initializers.h" -#ifdef CONFIG_USB_STORAGE_ONETOUCH -#include "onetouch.h" -#endif #include "sierra_ms.h" #include "option_ms.h" diff --git a/drivers/usb/storage/usual-tables.c b/drivers/usb/storage/usual-tables.c index bce086f..468bde7 100644 --- a/drivers/usb/storage/usual-tables.c +++ b/drivers/usb/storage/usual-tables.c @@ -84,6 +84,7 @@ static struct ignore_entry ignore_ids[] = { # include "unusual_isd200.h" # include "unusual_jumpshot.h" # include "unusual_karma.h" +# include "unusual_onetouch.h" # include "unusual_sddr09.h" # include "unusual_sddr55.h" # include "unusual_usbat.h" -- cgit v1.1 From 4246b06a33ebdd6593dccaab3aa01eb0c9f8c1c8 Mon Sep 17 00:00:00 2001 From: Maciej Grela Date: Sat, 28 Feb 2009 12:39:20 -0800 Subject: USB: usb-storage: added missing MODULE_LICENSE("GPL") for usb-storage ums-* modules The lack of a MODULE_LICENSE macro in ums-* subdrivers prevented them from loading. Needs to be applied after Alan Stern's usb-storage subdriver separation patchset. Also added missing MODULE_DESCRIPTION and MODULE_AUTHOR entries. Signed-off-by: Maciej Grela Acked-by: Alan Stern Acked-by: Matthew Dharm Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/alauda.c | 4 ++++ drivers/usb/storage/cypress_atacb.c | 3 +++ drivers/usb/storage/datafab.c | 4 ++++ drivers/usb/storage/freecom.c | 4 ++++ drivers/usb/storage/isd200.c | 3 +++ drivers/usb/storage/jumpshot.c | 4 ++++ drivers/usb/storage/karma.c | 4 ++++ drivers/usb/storage/onetouch.c | 4 ++++ drivers/usb/storage/sddr09.c | 3 +++ drivers/usb/storage/sddr55.c | 3 +++ drivers/usb/storage/shuttle_usbat.c | 3 +++ 11 files changed, 39 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/storage/alauda.c b/drivers/usb/storage/alauda.c index d3a88eb..67edc65 100644 --- a/drivers/usb/storage/alauda.c +++ b/drivers/usb/storage/alauda.c @@ -42,6 +42,10 @@ #include "protocol.h" #include "debug.h" +MODULE_DESCRIPTION("Driver for Alauda-based card readers"); +MODULE_AUTHOR("Daniel Drake "); +MODULE_LICENSE("GPL"); + /* * Status bytes */ diff --git a/drivers/usb/storage/cypress_atacb.c b/drivers/usb/storage/cypress_atacb.c index 19306f7b..c844718 100644 --- a/drivers/usb/storage/cypress_atacb.c +++ b/drivers/usb/storage/cypress_atacb.c @@ -30,6 +30,9 @@ #include "scsiglue.h" #include "debug.h" +MODULE_DESCRIPTION("SAT support for Cypress USB/ATA bridges with ATACB"); +MODULE_AUTHOR("Matthieu Castet "); +MODULE_LICENSE("GPL"); /* * The table of devices diff --git a/drivers/usb/storage/datafab.c b/drivers/usb/storage/datafab.c index 2d8d835..2b6e565 100644 --- a/drivers/usb/storage/datafab.c +++ b/drivers/usb/storage/datafab.c @@ -60,6 +60,10 @@ #include "protocol.h" #include "debug.h" +MODULE_DESCRIPTION("Driver for Datafab USB Compact Flash reader"); +MODULE_AUTHOR("Jimmie Mayfield "); +MODULE_LICENSE("GPL"); + struct datafab_info { unsigned long sectors; /* total sector count */ unsigned long ssize; /* sector size in bytes */ diff --git a/drivers/usb/storage/freecom.c b/drivers/usb/storage/freecom.c index 393047b..54cc942 100644 --- a/drivers/usb/storage/freecom.c +++ b/drivers/usb/storage/freecom.c @@ -35,6 +35,10 @@ #include "protocol.h" #include "debug.h" +MODULE_DESCRIPTION("Driver for Freecom USB/IDE adaptor"); +MODULE_AUTHOR("David Brown "); +MODULE_LICENSE("GPL"); + #ifdef CONFIG_USB_STORAGE_DEBUG static void pdump (void *, int); #endif diff --git a/drivers/usb/storage/isd200.c b/drivers/usb/storage/isd200.c index df94300..882c57b 100644 --- a/drivers/usb/storage/isd200.c +++ b/drivers/usb/storage/isd200.c @@ -59,6 +59,9 @@ #include "debug.h" #include "scsiglue.h" +MODULE_DESCRIPTION("Driver for In-System Design, Inc. ISD200 ASIC"); +MODULE_AUTHOR("Björn Stenberg "); +MODULE_LICENSE("GPL"); static int isd200_Initialization(struct us_data *us); diff --git a/drivers/usb/storage/jumpshot.c b/drivers/usb/storage/jumpshot.c index a50d6dc..1c69420 100644 --- a/drivers/usb/storage/jumpshot.c +++ b/drivers/usb/storage/jumpshot.c @@ -58,6 +58,10 @@ #include "debug.h" +MODULE_DESCRIPTION("Driver for Lexar \"Jumpshot\" Compact Flash reader"); +MODULE_AUTHOR("Jimmie Mayfield "); +MODULE_LICENSE("GPL"); + /* * The table of devices */ diff --git a/drivers/usb/storage/karma.c b/drivers/usb/storage/karma.c index cfb8e60..7953d93 100644 --- a/drivers/usb/storage/karma.c +++ b/drivers/usb/storage/karma.c @@ -28,6 +28,10 @@ #include "transport.h" #include "debug.h" +MODULE_DESCRIPTION("Driver for Rio Karma"); +MODULE_AUTHOR("Bob Copeland , Keith Bennett "); +MODULE_LICENSE("GPL"); + #define RIO_PREFIX "RIOP\x00" #define RIO_PREFIX_LEN 5 #define RIO_SEND_LEN 40 diff --git a/drivers/usb/storage/onetouch.c b/drivers/usb/storage/onetouch.c index 8bd0956..380233b 100644 --- a/drivers/usb/storage/onetouch.c +++ b/drivers/usb/storage/onetouch.c @@ -37,6 +37,10 @@ #include "usb.h" #include "debug.h" +MODULE_DESCRIPTION("Maxtor USB OneTouch hard drive button driver"); +MODULE_AUTHOR("Nick Sillik "); +MODULE_LICENSE("GPL"); + #define ONETOUCH_PKT_LEN 0x02 #define ONETOUCH_BUTTON KEY_PROG1 diff --git a/drivers/usb/storage/sddr09.c b/drivers/usb/storage/sddr09.c index 170ad86..ab5f9f3 100644 --- a/drivers/usb/storage/sddr09.c +++ b/drivers/usb/storage/sddr09.c @@ -53,6 +53,9 @@ #include "protocol.h" #include "debug.h" +MODULE_DESCRIPTION("Driver for SanDisk SDDR-09 SmartMedia reader"); +MODULE_AUTHOR("Andries Brouwer , Robert Baruch "); +MODULE_LICENSE("GPL"); static int usb_stor_sddr09_dpcm_init(struct us_data *us); static int sddr09_transport(struct scsi_cmnd *srb, struct us_data *us); diff --git a/drivers/usb/storage/sddr55.c b/drivers/usb/storage/sddr55.c index e97716f..44dfed7 100644 --- a/drivers/usb/storage/sddr55.c +++ b/drivers/usb/storage/sddr55.c @@ -35,6 +35,9 @@ #include "protocol.h" #include "debug.h" +MODULE_DESCRIPTION("Driver for SanDisk SDDR-55 SmartMedia reader"); +MODULE_AUTHOR("Simon Munton"); +MODULE_LICENSE("GPL"); /* * The table of devices diff --git a/drivers/usb/storage/shuttle_usbat.c b/drivers/usb/storage/shuttle_usbat.c index d4fe0bb..b62a288 100644 --- a/drivers/usb/storage/shuttle_usbat.c +++ b/drivers/usb/storage/shuttle_usbat.c @@ -54,6 +54,9 @@ #include "protocol.h" #include "debug.h" +MODULE_DESCRIPTION("Driver for SCM Microsystems (a.k.a. Shuttle) USB-ATAPI cable"); +MODULE_AUTHOR("Daniel Drake , Robert Baruch "); +MODULE_LICENSE("GPL"); /* Supported device types */ #define USBAT_DEV_HP8200 0x01 -- cgit v1.1 From 6da9c99059bf24fb1faae6b9613bae64ea50c05e Mon Sep 17 00:00:00 2001 From: David Vrabel Date: Wed, 18 Feb 2009 14:43:47 +0000 Subject: USB: allow libusb to talk to unauthenticated WUSB devices To permit a userspace application to associate with WUSB devices using numeric association, control transfers to unauthenticated WUSB devices must be allowed. This requires that wusbcore correctly sets the device state to UNAUTHENTICATED, DEFAULT and ADDRESS and that control transfers can be performed to UNAUTHENTICATED devices. Signed-off-by: David Vrabel Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/devio.c | 3 ++- drivers/usb/core/hub.c | 1 + drivers/usb/core/urb.c | 2 +- drivers/usb/wusbcore/devconnect.c | 2 ++ drivers/usb/wusbcore/security.c | 2 ++ 5 files changed, 8 insertions(+), 2 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 6585f52..8f022af 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -525,7 +525,8 @@ static int check_ctrlrecip(struct dev_state *ps, unsigned int requesttype, { int ret = 0; - if (ps->dev->state != USB_STATE_ADDRESS + if (ps->dev->state != USB_STATE_UNAUTHENTICATED + && ps->dev->state != USB_STATE_ADDRESS && ps->dev->state != USB_STATE_CONFIGURED) return -EHOSTUNREACH; if (USB_TYPE_VENDOR == (USB_TYPE_MASK & requesttype)) diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 7e33d63..f17d9eb 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1305,6 +1305,7 @@ void usb_set_device_state(struct usb_device *udev, recursively_mark_NOTATTACHED(udev); spin_unlock_irqrestore(&device_state_lock, flags); } +EXPORT_SYMBOL_GPL(usb_set_device_state); /* * WUSB devices are simple: they have no hubs behind, so the mapping diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c index 58bc5e3..7025d80 100644 --- a/drivers/usb/core/urb.c +++ b/drivers/usb/core/urb.c @@ -295,7 +295,7 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags) if (!urb || urb->hcpriv || !urb->complete) return -EINVAL; dev = urb->dev; - if ((!dev) || (dev->state < USB_STATE_DEFAULT)) + if ((!dev) || (dev->state < USB_STATE_UNAUTHENTICATED)) return -ENODEV; /* For now, get the endpoint from the pipe. Eventually drivers diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c index 8e18141..f0aac0c 100644 --- a/drivers/usb/wusbcore/devconnect.c +++ b/drivers/usb/wusbcore/devconnect.c @@ -889,6 +889,8 @@ static void wusb_dev_add_ncb(struct usb_device *usb_dev) if (usb_dev->wusb == 0 || usb_dev->devnum == 1) return; /* skip non wusb and wusb RHs */ + usb_set_device_state(usb_dev, USB_STATE_UNAUTHENTICATED); + wusbhc = wusbhc_get_by_usb_dev(usb_dev); if (wusbhc == NULL) goto error_nodev; diff --git a/drivers/usb/wusbcore/security.c b/drivers/usb/wusbcore/security.c index f4aa28e..8118db7 100644 --- a/drivers/usb/wusbcore/security.c +++ b/drivers/usb/wusbcore/security.c @@ -312,6 +312,7 @@ int wusb_dev_update_address(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev) result = wusb_set_dev_addr(wusbhc, wusb_dev, 0); if (result < 0) goto error_addr0; + usb_set_device_state(usb_dev, USB_STATE_DEFAULT); usb_ep0_reinit(usb_dev); /* Set new (authenticated) address. */ @@ -327,6 +328,7 @@ int wusb_dev_update_address(struct wusbhc *wusbhc, struct wusb_dev *wusb_dev) result = wusb_set_dev_addr(wusbhc, wusb_dev, new_address); if (result < 0) goto error_addr; + usb_set_device_state(usb_dev, USB_STATE_ADDRESS); usb_ep0_reinit(usb_dev); usb_dev->authenticated = 1; error_addr: -- cgit v1.1 From b2bdf3a789162aa6ff9c6f139bee9cc7954bc5b4 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Thu, 12 Feb 2009 15:09:47 +0200 Subject: USB: composite: avoid inconsistent lock state Avoid the following INFO from lock debugging: [ 369.126112] ================================= [ 369.132063] [ INFO: inconsistent lock state ] [ 369.136457] 2.6.28-maemo1 #1 [ 369.139387] --------------------------------- [ 369.143782] inconsistent {hardirq-on-W} -> {in-hardirq-W} usage. [ 369.149855] swapper/0 [HC1[1]:SC0[0]:HE0:SE1] takes: [ 369.154890] (&cdev->lock){+-..}, at: [] composite_disconnect+0x1c/0] [ 369.163404] {hardirq-on-W} state was registered at: [ 369.168348] [] __lock_acquire+0x5d0/0x7d8 [ 369.173506] [] lock_acquire+0x64/0x78 [ 369.178266] [] _spin_lock+0x4c/0x80 [ 369.182905] [] usb_function_deactivate+0x20/0x70 [g_nokia] [ 369.189527] [] 0xbf1a0a88 [ 369.193281] [] 0xbf19f450 [ 369.197004] [] 0xbf19fa3c [ 369.200758] [] 0xbf1a03a0 [ 369.204481] [] 0xbf19f254 [ 369.208204] [] 0xbf1a0158 [ 369.211927] [] 0xbf1a130c [ 369.215650] [] usb_gadget_register_driver+0x12c/0x28c [ 369.221846] [] 0xbf1a06bc [ 369.225569] [] 0xbf1a06e8 [ 369.229322] [] __exception_text_end+0x64/0x19c [ 369.234877] [] sys_init_module+0x9c/0x194 [ 369.240004] [] ret_fast_syscall+0x0/0x2c [ 369.245039] [] 0xffffffff [ 369.248793] irq event stamp: 218356 [ 369.252302] hardirqs last enabled at (218355): [] omap3_enter_idle+8 [ 369.260420] hardirqs last disabled at (218356): [] __irq_svc+0x34/0x0 [ 369.267927] softirqs last enabled at (218348): [] __do_softirq+0x134 [ 369.275892] softirqs last disabled at (218335): [] irq_exit+0x60/0xb0 [ 369.283308] [ 369.283308] other info that might help us debug this: [ 369.289930] no locks held by swapper/0. Cc: David Brownell Signed-off-by: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/composite.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index 5d11c29..40f1da7 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -149,16 +149,17 @@ done: int usb_function_deactivate(struct usb_function *function) { struct usb_composite_dev *cdev = function->config->cdev; + unsigned long flags; int status = 0; - spin_lock(&cdev->lock); + spin_lock_irqsave(&cdev->lock, flags); if (cdev->deactivations == 0) status = usb_gadget_disconnect(cdev->gadget); if (status == 0) cdev->deactivations++; - spin_unlock(&cdev->lock); + spin_unlock_irqrestore(&cdev->lock, flags); return status; } -- cgit v1.1 From 5d67a851bca63d30cde0474bfc4fc4f03db1a1b8 Mon Sep 17 00:00:00 2001 From: Sergei Shtylyov Date: Tue, 24 Feb 2009 15:23:34 -0800 Subject: USB: musb: rewrite host periodic endpoint allocation The current MUSB host code doesn't make use of all the available FIFOs in for periodic transfers since it wrongly assumes the RX and TX sides of any given hw_ep always share one FIFO. Change: use 'in_qh' and 'out_qh' fields of the 'struct musb_hw_ep' to check the endpoint's business; get rid of the now-unused 'periodic' array in the 'struct musb'. Also optimize a loop induction variable in the endpoint lookup code. (Based on a previous patch from Ajay Kumar Gupta ) [ dbrownell@users.sourceforge.net: clarify description and origin of this fix; whitespace ] Signed-off-by: Sergei Shtylyov Signed-off-by: David Brownell Cc: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_core.h | 1 - drivers/usb/musb/musb_host.c | 28 +++++++++++----------------- 2 files changed, 11 insertions(+), 18 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index 630946a..adf1806 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -331,7 +331,6 @@ struct musb { struct list_head control; /* of musb_qh */ struct list_head in_bulk; /* of musb_qh */ struct list_head out_bulk; /* of musb_qh */ - struct musb_qh *periodic[32]; /* tree of interrupt+iso */ #endif /* called with IRQs blocked; ON/nonzero implies starting a session, diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 6dbbd07..9489c85 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -395,7 +395,6 @@ musb_giveback(struct musb_qh *qh, struct urb *urb, int status) * de-allocated if it's tracked and allocated; * and where we'd update the schedule tree... */ - musb->periodic[ep->epnum] = NULL; kfree(qh); qh = NULL; break; @@ -1711,31 +1710,27 @@ static int musb_schedule( /* else, periodic transfers get muxed to other endpoints */ - /* FIXME this doesn't consider direction, so it can only - * work for one half of the endpoint hardware, and assumes - * the previous cases handled all non-shared endpoints... - */ - - /* we know this qh hasn't been scheduled, so all we need to do + /* + * We know this qh hasn't been scheduled, so all we need to do * is choose which hardware endpoint to put it on ... * * REVISIT what we really want here is a regular schedule tree - * like e.g. OHCI uses, but for now musb->periodic is just an - * array of the _single_ logical endpoint associated with a - * given physical one (identity mapping logical->physical). - * - * that simplistic approach makes TT scheduling a lot simpler; - * there is none, and thus none of its complexity... + * like e.g. OHCI uses. */ best_diff = 4096; best_end = -1; - for (epnum = 1; epnum < musb->nr_endpoints; epnum++) { + for (epnum = 1, hw_ep = musb->endpoints + 1; + epnum < musb->nr_endpoints; + epnum++, hw_ep++) { int diff; - if (musb->periodic[epnum]) + if (is_in || hw_ep->is_shared_fifo) { + if (hw_ep->in_qh != NULL) + continue; + } else if (hw_ep->out_qh != NULL) continue; - hw_ep = &musb->endpoints[epnum]; + if (hw_ep == musb->bulk_ep) continue; @@ -1764,7 +1759,6 @@ static int musb_schedule( idle = 1; qh->mux = 0; hw_ep = musb->endpoints + best_end; - musb->periodic[best_end] = qh; DBG(4, "qh %p periodic slot %d\n", qh, best_end); success: if (head) { -- cgit v1.1 From 1e0320f0d46022d12ddc84516cbdb8865e8cd744 Mon Sep 17 00:00:00 2001 From: Ajay Kumar Gupta Date: Tue, 24 Feb 2009 15:26:13 -0800 Subject: USB: musb: NAK timeout scheme on bulk RX endpoint Fixes endpoint starvation issue when more than one bulk QH is multiplexed on the reserved bulk RX endpoint, which is normal for cases like serial and ethernet adapters. This patch sets the NAK timeout interval for such QHs, and when a timeout triggers the next QH will be scheduled. (This resembles the bulk scheduling done in hardware by EHCI, OHCI, and UHCI.) This scheme doesn't work for devices which are connected to a high to full speed tree (transaction translator) as there is no NAK timeout interrupt from the musb controller from such devices. Tested with PIO, Inventra DMA, CPPI DMA. [ dbrownell@users.sourceforge.net: fold in start_urb() update; clarify only for bulk RX; don't accidentally clear WZC bits ] Signed-off-by: Ajay Kumar Gupta Cc: Felipe Balbi Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_host.c | 112 ++++++++++++++++++++++++++++++++----------- 1 file changed, 85 insertions(+), 27 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 9489c85..499c431 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -64,11 +64,8 @@ * * - DMA (Mentor/OMAP) ...has at least toggle update problems * - * - Still no traffic scheduling code to make NAKing for bulk or control - * transfers unable to starve other requests; or to make efficient use - * of hardware with periodic transfers. (Note that network drivers - * commonly post bulk reads that stay pending for a long time; these - * would make very visible trouble.) + * - [23-feb-2009] minimal traffic scheduling to avoid bulk RX packet + * starvation ... nothing yet for TX, interrupt, or bulk. * * - Not tested with HNP, but some SRP paths seem to behave. * @@ -88,11 +85,8 @@ * * CONTROL transfers all go through ep0. BULK ones go through dedicated IN * and OUT endpoints ... hardware is dedicated for those "async" queue(s). - * * (Yes, bulk _could_ use more of the endpoints than that, and would even - * benefit from it ... one remote device may easily be NAKing while others - * need to perform transfers in that same direction. The same thing could - * be done in software though, assuming dma cooperates.) + * benefit from it.) * * INTERUPPT and ISOCHRONOUS transfers are scheduled to the other endpoints. * So far that scheduling is both dumb and optimistic: the endpoint will be @@ -201,8 +195,9 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh) len = urb->iso_frame_desc[0].length; break; default: /* bulk, interrupt */ - buf = urb->transfer_buffer; - len = urb->transfer_buffer_length; + /* actual_length may be nonzero on retry paths */ + buf = urb->transfer_buffer + urb->actual_length; + len = urb->transfer_buffer_length - urb->actual_length; } DBG(4, "qh %p urb %p dev%d ep%d%s%s, hw_ep %d, %p/%d\n", @@ -1044,7 +1039,8 @@ irqreturn_t musb_h_ep0_irq(struct musb *musb) /* NOTE: this code path would be a good place to PAUSE a * control transfer, if another one is queued, so that - * ep0 is more likely to stay busy. + * ep0 is more likely to stay busy. That's already done + * for bulk RX transfers. * * if (qh->ring.next != &musb->control), then * we have a candidate... NAKing is *NOT* an error @@ -1196,6 +1192,7 @@ void musb_host_tx(struct musb *musb, u8 epnum) /* NOTE: this code path would be a good place to PAUSE a * transfer, if there's some other (nonperiodic) tx urb * that could use this fifo. (dma complicates it...) + * That's already done for bulk RX transfers. * * if (bulk && qh->ring.next != &musb->out_bulk), then * we have a candidate... NAKing is *NOT* an error @@ -1357,6 +1354,50 @@ finish: #endif +/* Schedule next QH from musb->in_bulk and move the current qh to + * the end; avoids starvation for other endpoints. + */ +static void musb_bulk_rx_nak_timeout(struct musb *musb, struct musb_hw_ep *ep) +{ + struct dma_channel *dma; + struct urb *urb; + void __iomem *mbase = musb->mregs; + void __iomem *epio = ep->regs; + struct musb_qh *cur_qh, *next_qh; + u16 rx_csr; + + musb_ep_select(mbase, ep->epnum); + dma = is_dma_capable() ? ep->rx_channel : NULL; + + /* clear nak timeout bit */ + rx_csr = musb_readw(epio, MUSB_RXCSR); + rx_csr |= MUSB_RXCSR_H_WZC_BITS; + rx_csr &= ~MUSB_RXCSR_DATAERROR; + musb_writew(epio, MUSB_RXCSR, rx_csr); + + cur_qh = first_qh(&musb->in_bulk); + if (cur_qh) { + urb = next_urb(cur_qh); + if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) { + dma->status = MUSB_DMA_STATUS_CORE_ABORT; + musb->dma_controller->channel_abort(dma); + urb->actual_length += dma->actual_len; + dma->actual_len = 0L; + } + musb_save_toggle(ep, 1, urb); + + /* move cur_qh to end of queue */ + list_move_tail(&cur_qh->ring, &musb->in_bulk); + + /* get the next qh from musb->in_bulk */ + next_qh = first_qh(&musb->in_bulk); + + /* set rx_reinit and schedule the next qh */ + ep->rx_reinit = 1; + musb_start_urb(musb, 1, next_qh); + } +} + /* * Service an RX interrupt for the given IN endpoint; docs cover bulk, iso, * and high-bandwidth IN transfer cases. @@ -1420,18 +1461,26 @@ void musb_host_rx(struct musb *musb, u8 epnum) } else if (rx_csr & MUSB_RXCSR_DATAERROR) { if (USB_ENDPOINT_XFER_ISOC != qh->type) { - /* NOTE this code path would be a good place to PAUSE a - * transfer, if there's some other (nonperiodic) rx urb - * that could use this fifo. (dma complicates it...) + DBG(6, "RX end %d NAK timeout\n", epnum); + + /* NOTE: NAKing is *NOT* an error, so we want to + * continue. Except ... if there's a request for + * another QH, use that instead of starving it. * - * if (bulk && qh->ring.next != &musb->in_bulk), then - * we have a candidate... NAKing is *NOT* an error + * Devices like Ethernet and serial adapters keep + * reads posted at all times, which will starve + * other devices without this logic. */ - DBG(6, "RX end %d NAK timeout\n", epnum); + if (usb_pipebulk(urb->pipe) + && qh->mux == 1 + && !list_is_singular(&musb->in_bulk)) { + musb_bulk_rx_nak_timeout(musb, hw_ep); + return; + } musb_ep_select(mbase, epnum); - musb_writew(epio, MUSB_RXCSR, - MUSB_RXCSR_H_WZC_BITS - | MUSB_RXCSR_H_REQPKT); + rx_csr |= MUSB_RXCSR_H_WZC_BITS; + rx_csr &= ~MUSB_RXCSR_DATAERROR; + musb_writew(epio, MUSB_RXCSR, rx_csr); goto finish; } else { @@ -1751,6 +1800,17 @@ static int musb_schedule( head = &musb->in_bulk; else head = &musb->out_bulk; + + /* Enable bulk RX NAK timeout scheme when bulk requests are + * multiplexed. This scheme doen't work in high speed to full + * speed scenario as NAK interrupts are not coming from a + * full speed device connected to a high speed device. + * NAK timeout interval is 8 (128 uframe or 16ms) for HS and + * 4 (8 frame or 8ms) for FS device. + */ + if (is_in && qh->dev) + qh->intv_reg = + (USB_SPEED_HIGH == qh->dev->speed) ? 8 : 4; goto success; } else if (best_end < 0) { return -ENOSPC; @@ -1882,13 +1942,11 @@ static int musb_urb_enqueue( * * The downside of disabling this is that transfer scheduling * gets VERY unfair for nonperiodic transfers; a misbehaving - * peripheral could make that hurt. Or for reads, one that's - * perfectly normal: network and other drivers keep reads - * posted at all times, having one pending for a week should - * be perfectly safe. + * peripheral could make that hurt. That's perfectly normal + * for reads from network or serial adapters ... so we have + * partial NAKlimit support for bulk RX. * - * The upside of disabling it is avoidng transfer scheduling - * code to put this aside for while. + * The upside of disabling it is simpler transfer scheduling. */ interval = 0; } -- cgit v1.1 From 322337168f22e8245aae7f38e84c5711cd4c1265 Mon Sep 17 00:00:00 2001 From: Giuseppe GORGOGLIONE Date: Tue, 24 Feb 2009 15:27:34 -0800 Subject: USB: musb: fix init oops crash with static FIFO config Correct musb_read_fifosize() and musb_configure_ep0() functions for the #ifndef BLACKFIN branch when the silicon uses static FIFO configuration. (Most current silicon configures this controller to use dynamic FIFO configuration; some parts from ST don't, like the STM STA2062.) Signed-off-by: Giuseppe GORGOGLIONE Signed-off-by: Felipe Balbi Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_core.h | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index adf1806..efb39b5 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -478,10 +478,11 @@ static inline void musb_configure_ep0(struct musb *musb) static inline int musb_read_fifosize(struct musb *musb, struct musb_hw_ep *hw_ep, u8 epnum) { + void *mbase = musb->mregs; u8 reg = 0; /* read from core using indexed model */ - reg = musb_readb(hw_ep->regs, 0x10 + MUSB_FIFOSIZE); + reg = musb_readb(mbase, MUSB_EP_OFFSET(epnum, MUSB_FIFOSIZE)); /* 0's returned when no more endpoints */ if (!reg) return -ENODEV; @@ -508,6 +509,7 @@ static inline void musb_configure_ep0(struct musb *musb) { musb->endpoints[0].max_packet_sz_tx = MUSB_EP0_FIFOSIZE; musb->endpoints[0].max_packet_sz_rx = MUSB_EP0_FIFOSIZE; + musb->endpoints[0].is_shared_fifo = true; } #endif /* CONFIG_BLACKFIN */ -- cgit v1.1 From 743821717c611913a5a3f95010b141f0b4cb5463 Mon Sep 17 00:00:00 2001 From: Ajay Kumar Gupta Date: Tue, 24 Feb 2009 15:29:04 -0800 Subject: USB: musb: only turn off vbus in OTG hosts Except on DaVinci, VBUS is now switched off as part of idling the USB link (after a_wait_bcon) whenever a device is disconnected from host. This is correct for OTG hosts, where either SRP or an ID interrupt could turn VBUS on again. However, for non-OTG hosts there's no way to turn VBUS on again, so the host becomes unusable. And the procfs entry which once allowed a manual workaround for this is now gone. This patch adds an is_otg_enabled() check before scheduling the switch-off timer in disconnect path, supporting a "classic host" mode where SRP is unavailable. [ dbrownell@users.sourceforge.net: tweak patch description ] Signed-off-by: Ajay Kumar Gupta Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/musb_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index af77e46..338cd16 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -769,7 +769,7 @@ static irqreturn_t musb_stage2_irq(struct musb *musb, u8 int_usb, case OTG_STATE_A_SUSPEND: usb_hcd_resume_root_hub(musb_to_hcd(musb)); musb_root_disconnect(musb); - if (musb->a_wait_bcon != 0) + if (musb->a_wait_bcon != 0 && is_otg_enabled(musb)) musb_platform_try_idle(musb, jiffies + msecs_to_jiffies(musb->a_wait_bcon)); break; -- cgit v1.1 From a227fd7db74fa05d866790a4b29ba049bb5035cc Mon Sep 17 00:00:00 2001 From: David Brownell Date: Tue, 24 Feb 2009 15:31:54 -0800 Subject: USB: musb: partial DaVinci dm355 support Partial support for DaVinci DM355, on the EVM board; peripheral mode should work, once mainline merges DM355 support. Missing: (a) renumbering the GPIO for DRVVBUS on the DM6446 EVM, when DAVINCI_N_GPIO increases; (b) disabling DM355_DEEPSLEEP.DRVVBUS_OVERRIDE so VBUS is driven according to the ID signal, if cpu_is_..._dm355() The new PHY control bits are ignored on DM6446. Signed-off-by: David Brownell Cc: Kevin Hilman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/Kconfig | 6 ++--- drivers/usb/musb/davinci.c | 63 ++++++++++++++++++++++++++++++++-------------- drivers/usb/musb/davinci.h | 23 +++++++++++------ 3 files changed, 62 insertions(+), 30 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index 9985db0..b66e854 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -20,8 +20,8 @@ config USB_MUSB_HDRC it's being used with, including the USB peripheral role, or the USB host role, or both. - Texas Instruments parts using this IP include DaVinci 644x, - OMAP 243x, OMAP 343x, and TUSB 6010. + Texas Instruments familiies using this IP include DaVinci + (35x, 644x ...), OMAP 243x, OMAP 3, and TUSB 6010. Analog Devices parts using this IP include Blackfin BF54x, BF525 and BF527. @@ -40,7 +40,7 @@ config USB_MUSB_SOC default y if (BF54x && !BF544) default y if (BF52x && !BF522 && !BF523) -comment "DaVinci 644x USB support" +comment "DaVinci 35x and 644x USB support" depends on USB_MUSB_HDRC && ARCH_DAVINCI comment "OMAP 243x high speed USB support" diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c index 2dc7606..10d11ab 100644 --- a/drivers/usb/musb/davinci.c +++ b/drivers/usb/musb/davinci.c @@ -48,6 +48,9 @@ #include "cppi_dma.h" +#define USB_PHY_CTRL IO_ADDRESS(USBPHY_CTL_PADDR) +#define DM355_DEEPSLEEP IO_ADDRESS(DM355_DEEPSLEEP_PADDR) + /* REVISIT (PM) we should be able to keep the PHY in low power mode most * of the time (24 MHZ oscillator and PLL off, etc) by setting POWER.D0 * and, when in host mode, autosuspending idle root ports... PHYPLLON @@ -56,20 +59,26 @@ static inline void phy_on(void) { - /* start the on-chip PHY and its PLL */ - __raw_writel(USBPHY_SESNDEN | USBPHY_VBDTCTEN | USBPHY_PHYPLLON, - (void __force __iomem *) IO_ADDRESS(USBPHY_CTL_PADDR)); - while ((__raw_readl((void __force __iomem *) - IO_ADDRESS(USBPHY_CTL_PADDR)) - & USBPHY_PHYCLKGD) == 0) + u32 phy_ctrl = __raw_readl(USB_PHY_CTRL); + + /* power everything up; start the on-chip PHY and its PLL */ + phy_ctrl &= ~(USBPHY_OSCPDWN | USBPHY_OTGPDWN | USBPHY_PHYPDWN); + phy_ctrl |= USBPHY_SESNDEN | USBPHY_VBDTCTEN | USBPHY_PHYPLLON; + __raw_writel(phy_ctrl, USB_PHY_CTRL); + + /* wait for PLL to lock before proceeding */ + while ((__raw_readl(USB_PHY_CTRL) & USBPHY_PHYCLKGD) == 0) cpu_relax(); } static inline void phy_off(void) { - /* powerdown the on-chip PHY and its oscillator */ - __raw_writel(USBPHY_OSCPDWN | USBPHY_PHYPDWN, (void __force __iomem *) - IO_ADDRESS(USBPHY_CTL_PADDR)); + u32 phy_ctrl = __raw_readl(USB_PHY_CTRL); + + /* powerdown the on-chip PHY, its PLL, and the OTG block */ + phy_ctrl &= ~(USBPHY_SESNDEN | USBPHY_VBDTCTEN | USBPHY_PHYPLLON); + phy_ctrl |= USBPHY_OSCPDWN | USBPHY_OTGPDWN | USBPHY_PHYPDWN; + __raw_writel(phy_ctrl, USB_PHY_CTRL); } static int dma_off = 1; @@ -126,10 +135,6 @@ void musb_platform_disable(struct musb *musb) } -/* REVISIT it's not clear whether DaVinci can support full OTG. */ - -static int vbus_state = -1; - #ifdef CONFIG_USB_MUSB_HDRC_HCD #define portstate(stmt) stmt #else @@ -137,10 +142,19 @@ static int vbus_state = -1; #endif -/* VBUS SWITCHING IS BOARD-SPECIFIC */ +/* + * VBUS SWITCHING IS BOARD-SPECIFIC ... at least for the DM6446 EVM, + * which doesn't wire DRVVBUS to the FET that switches it. Unclear + * if that's a problem with the DM6446 chip or just with that board. + * + * In either case, the DM355 EVM automates DRVVBUS the normal way, + * when J10 is out, and TI documents it as handling OTG. + */ #ifdef CONFIG_MACH_DAVINCI_EVM +static int vbus_state = -1; + /* I2C operations are always synchronous, and require a task context. * With unloaded systems, using the shared workqueue seems to suffice * to satisfy the 100msec A_WAIT_VRISE timeout... @@ -150,12 +164,12 @@ static void evm_deferred_drvvbus(struct work_struct *ignored) gpio_set_value_cansleep(GPIO_nVBUS_DRV, vbus_state); vbus_state = !vbus_state; } -static DECLARE_WORK(evm_vbus_work, evm_deferred_drvvbus); #endif /* EVM */ static void davinci_source_power(struct musb *musb, int is_on, int immediate) { +#ifdef CONFIG_MACH_DAVINCI_EVM if (is_on) is_on = 1; @@ -163,16 +177,17 @@ static void davinci_source_power(struct musb *musb, int is_on, int immediate) return; vbus_state = !is_on; /* 0/1 vs "-1 == unknown/init" */ -#ifdef CONFIG_MACH_DAVINCI_EVM if (machine_is_davinci_evm()) { + static DECLARE_WORK(evm_vbus_work, evm_deferred_drvvbus); + if (immediate) gpio_set_value_cansleep(GPIO_nVBUS_DRV, vbus_state); else schedule_work(&evm_vbus_work); } -#endif if (immediate) vbus_state = is_on; +#endif } static void davinci_set_vbus(struct musb *musb, int is_on) @@ -391,6 +406,17 @@ int __init musb_platform_init(struct musb *musb) musb->board_set_vbus = davinci_set_vbus; davinci_source_power(musb, 0, 1); + /* dm355 EVM swaps D+/D- for signal integrity, and + * is clocked from the main 24 MHz crystal. + */ + if (machine_is_davinci_dm355_evm()) { + u32 phy_ctrl = __raw_readl(USB_PHY_CTRL); + + phy_ctrl &= ~(3 << 9); + phy_ctrl |= USBPHY_DATAPOL; + __raw_writel(phy_ctrl, USB_PHY_CTRL); + } + /* reset the controller */ musb_writel(tibase, DAVINCI_USB_CTRL_REG, 0x1); @@ -401,8 +427,7 @@ int __init musb_platform_init(struct musb *musb) /* NOTE: irqs are in mixed mode, not bypass to pure-musb */ pr_debug("DaVinci OTG revision %08x phy %03x control %02x\n", - revision, __raw_readl((void __force __iomem *) - IO_ADDRESS(USBPHY_CTL_PADDR)), + revision, __raw_readl(USB_PHY_CTRL), musb_readb(tibase, DAVINCI_USB_CTRL_REG)); musb->isr = davinci_interrupt; diff --git a/drivers/usb/musb/davinci.h b/drivers/usb/musb/davinci.h index 7fb6238..046c844 100644 --- a/drivers/usb/musb/davinci.h +++ b/drivers/usb/musb/davinci.h @@ -15,14 +15,21 @@ */ /* Integrated highspeed/otg PHY */ -#define USBPHY_CTL_PADDR (DAVINCI_SYSTEM_MODULE_BASE + 0x34) -#define USBPHY_PHYCLKGD (1 << 8) -#define USBPHY_SESNDEN (1 << 7) /* v(sess_end) comparator */ -#define USBPHY_VBDTCTEN (1 << 6) /* v(bus) comparator */ -#define USBPHY_PHYPLLON (1 << 4) /* override pll suspend */ -#define USBPHY_CLKO1SEL (1 << 3) -#define USBPHY_OSCPDWN (1 << 2) -#define USBPHY_PHYPDWN (1 << 0) +#define USBPHY_CTL_PADDR (DAVINCI_SYSTEM_MODULE_BASE + 0x34) +#define USBPHY_DATAPOL BIT(11) /* (dm355) switch D+/D- */ +#define USBPHY_PHYCLKGD BIT(8) +#define USBPHY_SESNDEN BIT(7) /* v(sess_end) comparator */ +#define USBPHY_VBDTCTEN BIT(6) /* v(bus) comparator */ +#define USBPHY_VBUSSENS BIT(5) /* (dm355,ro) is vbus > 0.5V */ +#define USBPHY_PHYPLLON BIT(4) /* override pll suspend */ +#define USBPHY_CLKO1SEL BIT(3) +#define USBPHY_OSCPDWN BIT(2) +#define USBPHY_OTGPDWN BIT(1) +#define USBPHY_PHYPDWN BIT(0) + +#define DM355_DEEPSLEEP_PADDR (DAVINCI_SYSTEM_MODULE_BASE + 0x48) +#define DRVVBUS_FORCE BIT(2) +#define DRVVBUS_OVERRIDE BIT(1) /* For now include usb OTG module registers here */ #define DAVINCI_USB_VERSION_REG 0x00 -- cgit v1.1 From 1ded7ea47b8829a06068c3bb5e3ebe471076617a Mon Sep 17 00:00:00 2001 From: Ming Lei Date: Fri, 20 Feb 2009 21:23:09 +0800 Subject: USB: ch341 serial: fix port number changed after resume This patch fixes the following bug: .plug ch341 usb serial port into a hub port; .ch341 driver bound to the device and /dev/ttyUSB0 comes .open /dev/ttyUSB0 by minicom and we can use the serial successfully .suspend the ch341 usb serial device(such as: echo suspend > power/level) .resume the ch341 usb serial device (such as: echo on > power/level) .new port /dev/ttyUSB1 comes ,and the original /dev/ttyUSB0 still exists, but is no longer usable by minicom The patch adds suspend and resume callback to ch341 usb driver to prevent it from unbinding during suspend. The /dev/ttyUSB0 is not released until being closed, so /dev/ttyUSB1 comes after resume, and the original /dev/ttyUSB0 is no longer usable by minicom. It is really a mess for a minicom user. This patch also adds the reset_resume callback to make it usable after resuming from STR or hibernation, for generally STR or hibernation will make the vbus of root-hub lost. Finally enable the driver's supports_autosuspend, for the device is in working order with it. Signed-off-by: Ming Lei Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ch341.c | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index d5ea679..ab4cc27 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -529,12 +529,34 @@ static int ch341_tiocmget(struct tty_struct *tty, struct file *file) return result; } + +static int ch341_reset_resume(struct usb_interface *intf) +{ + struct usb_device *dev = interface_to_usbdev(intf); + struct usb_serial *serial = NULL; + struct ch341_private *priv; + + serial = usb_get_intfdata(intf); + priv = usb_get_serial_port_data(serial->port[0]); + + /*reconfigure ch341 serial port after bus-reset*/ + ch341_configure(dev, priv); + + usb_serial_resume(intf); + + return 0; +} + static struct usb_driver ch341_driver = { .name = "ch341", .probe = usb_serial_probe, .disconnect = usb_serial_disconnect, + .suspend = usb_serial_suspend, + .resume = usb_serial_resume, + .reset_resume = ch341_reset_resume, .id_table = id_table, .no_dynamic_id = 1, + .supports_autosuspend = 1, }; static struct usb_serial_driver ch341_device = { -- cgit v1.1 From 471c604daf73ff549d374ee54f9e6bfd5a54d4e8 Mon Sep 17 00:00:00 2001 From: Pete Zaitcev Date: Thu, 19 Feb 2009 22:54:45 -0700 Subject: USB: usbmon: Add binary API v1 This patch adds an extension to the binary API so it reaches parity with existing text API (so-called "1u"). The extension delivers additional data, such as ISO descriptors and the interrupt interval. Signed-Off-By: Pete Zaitcev Signed-off-by: Greg Kroah-Hartman --- drivers/usb/mon/mon_bin.c | 142 +++++++++++++++++++++++++++++++++++++--------- 1 file changed, 116 insertions(+), 26 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c index 4cf27c7..f8d9045 100644 --- a/drivers/usb/mon/mon_bin.c +++ b/drivers/usb/mon/mon_bin.c @@ -37,10 +37,13 @@ #define MON_IOCX_GET _IOW(MON_IOC_MAGIC, 6, struct mon_bin_get) #define MON_IOCX_MFETCH _IOWR(MON_IOC_MAGIC, 7, struct mon_bin_mfetch) #define MON_IOCH_MFLUSH _IO(MON_IOC_MAGIC, 8) +/* #9 was MON_IOCT_SETAPI */ +#define MON_IOCX_GETX _IOW(MON_IOC_MAGIC, 10, struct mon_bin_get) #ifdef CONFIG_COMPAT #define MON_IOCX_GET32 _IOW(MON_IOC_MAGIC, 6, struct mon_bin_get32) #define MON_IOCX_MFETCH32 _IOWR(MON_IOC_MAGIC, 7, struct mon_bin_mfetch32) +#define MON_IOCX_GETX32 _IOW(MON_IOC_MAGIC, 10, struct mon_bin_get32) #endif /* @@ -92,7 +95,29 @@ struct mon_bin_hdr { int status; unsigned int len_urb; /* Length of data (submitted or actual) */ unsigned int len_cap; /* Delivered length */ - unsigned char setup[SETUP_LEN]; /* Only for Control S-type */ + union { + unsigned char setup[SETUP_LEN]; /* Only for Control S-type */ + struct iso_rec { + int error_count; + int numdesc; + } iso; + } s; + int interval; + int start_frame; + unsigned int xfer_flags; + unsigned int ndesc; /* Actual number of ISO descriptors */ +}; + +/* + * ISO vector, packed into the head of data stream. + * This has to take 16 bytes to make sure that the end of buffer + * wrap is not happening in the middle of a descriptor. + */ +struct mon_bin_isodesc { + int iso_status; + unsigned int iso_off; + unsigned int iso_len; + u32 _pad; }; /* per file statistic */ @@ -102,7 +127,7 @@ struct mon_bin_stats { }; struct mon_bin_get { - struct mon_bin_hdr __user *hdr; /* Only 48 bytes, not 64. */ + struct mon_bin_hdr __user *hdr; /* Can be 48 bytes or 64. */ void __user *data; size_t alloc; /* Length of data (can be zero) */ }; @@ -131,6 +156,11 @@ struct mon_bin_mfetch32 { #define PKT_ALIGN 64 #define PKT_SIZE 64 +#define PKT_SZ_API0 48 /* API 0 (2.6.20) size */ +#define PKT_SZ_API1 64 /* API 1 size: extra fields */ + +#define ISODESC_MAX 128 /* Same number as usbfs allows, 2048 bytes. */ + /* max number of USB bus supported */ #define MON_BIN_MAX_MINOR 128 @@ -360,12 +390,8 @@ static inline char mon_bin_get_setup(unsigned char *setupb, const struct urb *urb, char ev_type) { - if (!usb_endpoint_xfer_control(&urb->ep->desc) || ev_type != 'S') - return '-'; - if (urb->setup_packet == NULL) return 'Z'; - memcpy(setupb, urb->setup_packet, SETUP_LEN); return 0; } @@ -387,6 +413,26 @@ static char mon_bin_get_data(const struct mon_reader_bin *rp, return 0; } +static void mon_bin_get_isodesc(const struct mon_reader_bin *rp, + unsigned int offset, struct urb *urb, char ev_type, unsigned int ndesc) +{ + struct mon_bin_isodesc *dp; + struct usb_iso_packet_descriptor *fp; + + fp = urb->iso_frame_desc; + while (ndesc-- != 0) { + dp = (struct mon_bin_isodesc *) + (rp->b_vec[offset / CHUNK_SIZE].ptr + offset % CHUNK_SIZE); + dp->iso_status = fp->status; + dp->iso_off = fp->offset; + dp->iso_len = (ev_type == 'S') ? fp->length : fp->actual_length; + dp->_pad = 0; + if ((offset += sizeof(struct mon_bin_isodesc)) >= rp->b_size) + offset = 0; + fp++; + } +} + static void mon_bin_event(struct mon_reader_bin *rp, struct urb *urb, char ev_type, int status) { @@ -396,6 +442,7 @@ static void mon_bin_event(struct mon_reader_bin *rp, struct urb *urb, unsigned int urb_length; unsigned int offset; unsigned int length; + unsigned int ndesc, lendesc; unsigned char dir; struct mon_bin_hdr *ep; char data_tag = 0; @@ -407,6 +454,19 @@ static void mon_bin_event(struct mon_reader_bin *rp, struct urb *urb, /* * Find the maximum allowable length, then allocate space. */ + if (usb_endpoint_xfer_isoc(epd)) { + if (urb->number_of_packets < 0) { + ndesc = 0; + } else if (urb->number_of_packets >= ISODESC_MAX) { + ndesc = ISODESC_MAX; + } else { + ndesc = urb->number_of_packets; + } + } else { + ndesc = 0; + } + lendesc = ndesc*sizeof(struct mon_bin_isodesc); + urb_length = (ev_type == 'S') ? urb->transfer_buffer_length : urb->actual_length; length = urb_length; @@ -429,10 +489,12 @@ static void mon_bin_event(struct mon_reader_bin *rp, struct urb *urb, dir = 0; } - if (rp->mmap_active) - offset = mon_buff_area_alloc_contiguous(rp, length + PKT_SIZE); - else - offset = mon_buff_area_alloc(rp, length + PKT_SIZE); + if (rp->mmap_active) { + offset = mon_buff_area_alloc_contiguous(rp, + length + PKT_SIZE + lendesc); + } else { + offset = mon_buff_area_alloc(rp, length + PKT_SIZE + lendesc); + } if (offset == ~0) { rp->cnt_lost++; spin_unlock_irqrestore(&rp->b_lock, flags); @@ -456,9 +518,31 @@ static void mon_bin_event(struct mon_reader_bin *rp, struct urb *urb, ep->ts_usec = ts.tv_usec; ep->status = status; ep->len_urb = urb_length; - ep->len_cap = length; + ep->len_cap = length + lendesc; + ep->xfer_flags = urb->transfer_flags; + + if (usb_endpoint_xfer_int(epd)) { + ep->interval = urb->interval; + } else if (usb_endpoint_xfer_isoc(epd)) { + ep->interval = urb->interval; + ep->start_frame = urb->start_frame; + ep->s.iso.error_count = urb->error_count; + ep->s.iso.numdesc = urb->number_of_packets; + } + + if (usb_endpoint_xfer_control(epd) && ev_type == 'S') { + ep->flag_setup = mon_bin_get_setup(ep->s.setup, urb, ev_type); + } else { + ep->flag_setup = '-'; + } + + if (ndesc != 0) { + ep->ndesc = ndesc; + mon_bin_get_isodesc(rp, offset, urb, ev_type, ndesc); + if ((offset += lendesc) >= rp->b_size) + offset -= rp->b_size; + } - ep->flag_setup = mon_bin_get_setup(ep->setup, urb, ev_type); if (length != 0) { ep->flag_data = mon_bin_get_data(rp, offset, urb, length); if (ep->flag_data != 0) { /* Yes, it's 0x00, not '0' */ @@ -592,7 +676,8 @@ err_alloc: * Returns zero or error. */ static int mon_bin_get_event(struct file *file, struct mon_reader_bin *rp, - struct mon_bin_hdr __user *hdr, void __user *data, unsigned int nbytes) + struct mon_bin_hdr __user *hdr, unsigned int hdrbytes, + void __user *data, unsigned int nbytes) { unsigned long flags; struct mon_bin_hdr *ep; @@ -609,7 +694,7 @@ static int mon_bin_get_event(struct file *file, struct mon_reader_bin *rp, ep = MON_OFF2HDR(rp, rp->b_out); - if (copy_to_user(hdr, ep, sizeof(struct mon_bin_hdr))) { + if (copy_to_user(hdr, ep, hdrbytes)) { mutex_unlock(&rp->fetch_lock); return -EFAULT; } @@ -657,6 +742,7 @@ static ssize_t mon_bin_read(struct file *file, char __user *buf, size_t nbytes, loff_t *ppos) { struct mon_reader_bin *rp = file->private_data; + unsigned int hdrbytes = PKT_SZ_API0; unsigned long flags; struct mon_bin_hdr *ep; unsigned int offset; @@ -674,8 +760,8 @@ static ssize_t mon_bin_read(struct file *file, char __user *buf, ep = MON_OFF2HDR(rp, rp->b_out); - if (rp->b_read < sizeof(struct mon_bin_hdr)) { - step_len = min(nbytes, sizeof(struct mon_bin_hdr) - rp->b_read); + if (rp->b_read < hdrbytes) { + step_len = min(nbytes, (size_t)(hdrbytes - rp->b_read)); ptr = ((char *)ep) + rp->b_read; if (step_len && copy_to_user(buf, ptr, step_len)) { mutex_unlock(&rp->fetch_lock); @@ -687,13 +773,13 @@ static ssize_t mon_bin_read(struct file *file, char __user *buf, done += step_len; } - if (rp->b_read >= sizeof(struct mon_bin_hdr)) { + if (rp->b_read >= hdrbytes) { step_len = ep->len_cap; - step_len -= rp->b_read - sizeof(struct mon_bin_hdr); + step_len -= rp->b_read - hdrbytes; if (step_len > nbytes) step_len = nbytes; offset = rp->b_out + PKT_SIZE; - offset += rp->b_read - sizeof(struct mon_bin_hdr); + offset += rp->b_read - hdrbytes; if (offset >= rp->b_size) offset -= rp->b_size; if (copy_from_buf(rp, offset, buf, step_len)) { @@ -709,7 +795,7 @@ static ssize_t mon_bin_read(struct file *file, char __user *buf, /* * Check if whole packet was read, and if so, jump to the next one. */ - if (rp->b_read >= sizeof(struct mon_bin_hdr) + ep->len_cap) { + if (rp->b_read >= hdrbytes + ep->len_cap) { spin_lock_irqsave(&rp->b_lock, flags); mon_buff_area_free(rp, PKT_SIZE + ep->len_cap); spin_unlock_irqrestore(&rp->b_lock, flags); @@ -908,6 +994,7 @@ static int mon_bin_ioctl(struct inode *inode, struct file *file, break; case MON_IOCX_GET: + case MON_IOCX_GETX: { struct mon_bin_get getb; @@ -917,8 +1004,9 @@ static int mon_bin_ioctl(struct inode *inode, struct file *file, if (getb.alloc > 0x10000000) /* Want to cast to u32 */ return -EINVAL; - ret = mon_bin_get_event(file, rp, - getb.hdr, getb.data, (unsigned int)getb.alloc); + ret = mon_bin_get_event(file, rp, getb.hdr, + (cmd == MON_IOCX_GET)? PKT_SZ_API0: PKT_SZ_API1, + getb.data, (unsigned int)getb.alloc); } break; @@ -984,16 +1072,18 @@ static long mon_bin_compat_ioctl(struct file *file, switch (cmd) { - case MON_IOCX_GET32: { + case MON_IOCX_GET32: + case MON_IOCX_GETX32: + { struct mon_bin_get32 getb; if (copy_from_user(&getb, (void __user *)arg, sizeof(struct mon_bin_get32))) return -EFAULT; - ret = mon_bin_get_event(file, rp, - compat_ptr(getb.hdr32), compat_ptr(getb.data32), - getb.alloc32); + ret = mon_bin_get_event(file, rp, compat_ptr(getb.hdr32), + (cmd == MON_IOCX_GET32)? PKT_SZ_API0: PKT_SZ_API1, + compat_ptr(getb.data32), getb.alloc32); if (ret < 0) return ret; } -- cgit v1.1 From 66760169492445395c530c812443f58e2cfdb3dc Mon Sep 17 00:00:00 2001 From: Jouni Hogander Date: Fri, 20 Feb 2009 14:02:31 +0200 Subject: USB: TWL: disable VUSB regulators when cable unplugged This patch disables USB regulators VUSB1V5, VUSB1V8, and VUSB3V1 when the USB cable is unplugged to reduce power consumption. Added a depencency from twl4030 usb driver to TWL_REGULATOR. Signed-off-by: Jouni Hogander Signed-off-by: Kalle Jokiniemi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/otg/Kconfig | 2 +- drivers/usb/otg/twl4030-usb.c | 73 +++++++++++++++++++++++++++++++++++++------ 2 files changed, 65 insertions(+), 10 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig index fc1ca03..aa884d0 100644 --- a/drivers/usb/otg/Kconfig +++ b/drivers/usb/otg/Kconfig @@ -43,7 +43,7 @@ config ISP1301_OMAP config TWL4030_USB tristate "TWL4030 USB Transceiver Driver" - depends on TWL4030_CORE + depends on TWL4030_CORE && REGULATOR_TWL4030 select USB_OTG_UTILS help Enable this to support the USB OTG transceiver on TWL4030 diff --git a/drivers/usb/otg/twl4030-usb.c b/drivers/usb/otg/twl4030-usb.c index 416e441..d9478d0 100644 --- a/drivers/usb/otg/twl4030-usb.c +++ b/drivers/usb/otg/twl4030-usb.c @@ -34,6 +34,8 @@ #include #include #include +#include +#include /* Register defines */ @@ -246,6 +248,11 @@ struct twl4030_usb { struct otg_transceiver otg; struct device *dev; + /* TWL4030 internal USB regulator supplies */ + struct regulator *usb1v5; + struct regulator *usb1v8; + struct regulator *usb3v1; + /* for vbus reporting with irqs disabled */ spinlock_t lock; @@ -434,6 +441,18 @@ static void twl4030_phy_power(struct twl4030_usb *twl, int on) pwr = twl4030_usb_read(twl, PHY_PWR_CTRL); if (on) { + regulator_enable(twl->usb3v1); + regulator_enable(twl->usb1v8); + /* + * Disabling usb3v1 regulator (= writing 0 to VUSB3V1_DEV_GRP + * in twl4030) resets the VUSB_DEDICATED2 register. This reset + * enables VUSB3V1_SLEEP bit that remaps usb3v1 ACTIVE state to + * SLEEP. We work around this by clearing the bit after usv3v1 + * is re-activated. This ensures that VUSB3V1 is really active. + */ + twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, + VUSB_DEDICATED2); + regulator_enable(twl->usb1v5); pwr &= ~PHY_PWR_PHYPWD; WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0); twl4030_usb_write(twl, PHY_CLK_CTRL, @@ -443,6 +462,9 @@ static void twl4030_phy_power(struct twl4030_usb *twl, int on) } else { pwr |= PHY_PWR_PHYPWD; WARN_ON(twl4030_usb_write_verify(twl, PHY_PWR_CTRL, pwr) < 0); + regulator_disable(twl->usb1v5); + regulator_disable(twl->usb1v8); + regulator_disable(twl->usb3v1); } } @@ -468,7 +490,7 @@ static void twl4030_phy_resume(struct twl4030_usb *twl) twl->asleep = 0; } -static void twl4030_usb_ldo_init(struct twl4030_usb *twl) +static int twl4030_usb_ldo_init(struct twl4030_usb *twl) { /* Enable writing to power configuration registers */ twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0xC0, PROTECT_KEY); @@ -480,20 +502,45 @@ static void twl4030_usb_ldo_init(struct twl4030_usb *twl) /* input to VUSB3V1 LDO is from VBAT, not VBUS */ twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x14, VUSB_DEDICATED1); - /* turn on 3.1V regulator */ - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x20, VUSB3V1_DEV_GRP); + /* Initialize 3.1V regulator */ + twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB3V1_DEV_GRP); + + twl->usb3v1 = regulator_get(twl->dev, "usb3v1"); + if (IS_ERR(twl->usb3v1)) + return -ENODEV; + twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB3V1_TYPE); - /* turn on 1.5V regulator */ - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x20, VUSB1V5_DEV_GRP); + /* Initialize 1.5V regulator */ + twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V5_DEV_GRP); + + twl->usb1v5 = regulator_get(twl->dev, "usb1v5"); + if (IS_ERR(twl->usb1v5)) + goto fail1; + twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V5_TYPE); - /* turn on 1.8V regulator */ - twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0x20, VUSB1V8_DEV_GRP); + /* Initialize 1.8V regulator */ + twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V8_DEV_GRP); + + twl->usb1v8 = regulator_get(twl->dev, "usb1v8"); + if (IS_ERR(twl->usb1v8)) + goto fail2; + twl4030_i2c_write_u8(TWL4030_MODULE_PM_RECEIVER, 0, VUSB1V8_TYPE); /* disable access to power configuration registers */ twl4030_i2c_write_u8(TWL4030_MODULE_PM_MASTER, 0, PROTECT_KEY); + + return 0; + +fail2: + regulator_put(twl->usb1v5); + twl->usb1v5 = NULL; +fail1: + regulator_put(twl->usb3v1); + twl->usb3v1 = NULL; + return -ENODEV; } static ssize_t twl4030_usb_vbus_show(struct device *dev, @@ -598,7 +645,7 @@ static int __init twl4030_usb_probe(struct platform_device *pdev) { struct twl4030_usb_data *pdata = pdev->dev.platform_data; struct twl4030_usb *twl; - int status; + int status, err; if (!pdata) { dev_dbg(&pdev->dev, "platform_data not available\n"); @@ -622,7 +669,12 @@ static int __init twl4030_usb_probe(struct platform_device *pdev) /* init spinlock for workqueue */ spin_lock_init(&twl->lock); - twl4030_usb_ldo_init(twl); + err = twl4030_usb_ldo_init(twl); + if (err) { + dev_err(&pdev->dev, "ldo init failed\n"); + kfree(twl); + return err; + } otg_set_transceiver(&twl->otg); platform_set_drvdata(pdev, twl); @@ -688,6 +740,9 @@ static int __exit twl4030_usb_remove(struct platform_device *pdev) twl4030_usb_clear_bits(twl, POWER_CTRL, POWER_CTRL_OTG_ENAB); twl4030_phy_power(twl, 0); + regulator_put(twl->usb1v5); + regulator_put(twl->usb1v8); + regulator_put(twl->usb3v1); kfree(twl); -- cgit v1.1 From 7ea0a2bcfe40b1c525e63e931b7142ab22b64269 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 5 Mar 2009 11:01:11 -0500 Subject: USB: uhci: don't use pseudo negative values The code in uhci-q.c doesn't have to use pseudo-negative values. I did it that way because it was easy and because it would give the expected output during debugging. But it doesn't have to work that way. Here's another approach. Signed-off-by: Alan Stern Cc: Roel Kluin Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/uhci-debug.c | 4 +++- drivers/usb/host/uhci-q.c | 11 ++++------- 2 files changed, 7 insertions(+), 8 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/uhci-debug.c b/drivers/usb/host/uhci-debug.c index 20cc58b..e52b954 100644 --- a/drivers/usb/host/uhci-debug.c +++ b/drivers/usb/host/uhci-debug.c @@ -118,7 +118,9 @@ static int uhci_show_urbp(struct urb_priv *urbp, char *buf, int len, int space) } out += sprintf(out, "%s%s", ptype, (urbp->fsbr ? " FSBR" : "")); - out += sprintf(out, " Actlen=%d", urbp->urb->actual_length); + out += sprintf(out, " Actlen=%d%s", urbp->urb->actual_length, + (urbp->qh->type == USB_ENDPOINT_XFER_CONTROL ? + "-8" : "")); if (urbp->urb->unlinked) out += sprintf(out, " Unlinked=%d", urbp->urb->unlinked); diff --git a/drivers/usb/host/uhci-q.c b/drivers/usb/host/uhci-q.c index 58f8736..3e5807d 100644 --- a/drivers/usb/host/uhci-q.c +++ b/drivers/usb/host/uhci-q.c @@ -899,8 +899,6 @@ static int uhci_submit_control(struct uhci_hcd *uhci, struct urb *urb, } if (qh->state != QH_STATE_ACTIVE) qh->skel = skel; - - urb->actual_length = -8; /* Account for the SETUP packet */ return 0; nomem: @@ -1494,11 +1492,10 @@ __acquires(uhci->lock) if (qh->type == USB_ENDPOINT_XFER_CONTROL) { - /* urb->actual_length < 0 means the setup transaction didn't - * complete successfully. Either it failed or the URB was - * unlinked first. Regardless, don't confuse people with a - * negative length. */ - urb->actual_length = max(urb->actual_length, 0); + /* Subtract off the length of the SETUP packet from + * urb->actual_length. + */ + urb->actual_length -= min_t(u32, 8, urb->actual_length); } /* When giving back the first URB in an Isochronous queue, -- cgit v1.1 From 16e2e5f634f86ccda18366967c4e592eb61bc9cc Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Tue, 3 Mar 2009 16:44:13 -0800 Subject: USB: make transfer_buffer_lengths in struct urb field u32 Roel Kluin pointed out that transfer_buffer_lengths in struct urb was declared as an 'int'. This patch changes this field to be 'u32' to prevent any potential negative conversion and comparison errors. This triggered a few compiler warning messages when these fields were being used with the min macro, so they have also been fixed up in this patch. Cc: Roel Kluin Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/dummy_hcd.c | 2 +- drivers/usb/host/isp116x-hcd.c | 2 +- drivers/usb/host/r8a66597-hcd.c | 2 +- drivers/usb/host/sl811-hcd.c | 4 ++-- drivers/usb/misc/ftdi-elan.c | 6 +++--- 5 files changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index 3b42888..a56b24d 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -1437,7 +1437,7 @@ restart: } if (urb->transfer_buffer_length > 1) buf [1] = 0; - urb->actual_length = min (2, + urb->actual_length = min_t(u32, 2, urb->transfer_buffer_length); value = 0; status = 0; diff --git a/drivers/usb/host/isp116x-hcd.c b/drivers/usb/host/isp116x-hcd.c index 4dda31b..a2b3054 100644 --- a/drivers/usb/host/isp116x-hcd.c +++ b/drivers/usb/host/isp116x-hcd.c @@ -772,7 +772,7 @@ static int isp116x_urb_enqueue(struct usb_hcd *hcd, break; case PIPE_INTERRUPT: urb->interval = ep->period; - ep->length = min((int)ep->maxpacket, + ep->length = min_t(u32, ep->maxpacket, urb->transfer_buffer_length); /* urb submitted for already existing endpoint */ diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index 5e942d9..713f4cf 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -1394,7 +1394,7 @@ static void packet_write(struct r8a66597 *r8a66597, u16 pipenum) (int)urb->iso_frame_desc[td->iso_cnt].length); } else { buf = (u16 *)(urb->transfer_buffer + urb->actual_length); - size = min((int)bufsize, + size = min_t(u32, bufsize, urb->transfer_buffer_length - urb->actual_length); } diff --git a/drivers/usb/host/sl811-hcd.c b/drivers/usb/host/sl811-hcd.c index e106e9d..a949259 100644 --- a/drivers/usb/host/sl811-hcd.c +++ b/drivers/usb/host/sl811-hcd.c @@ -230,7 +230,7 @@ static void in_packet( writeb(usb_pipedevice(urb->pipe), data_reg); sl811_write(sl811, bank + SL11H_HOSTCTLREG, control); - ep->length = min((int)len, + ep->length = min_t(u32, len, urb->transfer_buffer_length - urb->actual_length); PACKET("IN%s/%d qh%p len%d\n", ep->nak_count ? "/retry" : "", !!usb_gettoggle(urb->dev, ep->epnum, 0), ep, len); @@ -255,7 +255,7 @@ static void out_packet( buf = urb->transfer_buffer + urb->actual_length; prefetch(buf); - len = min((int)ep->maxpacket, + len = min_t(u32, ep->maxpacket, urb->transfer_buffer_length - urb->actual_length); if (!(control & SL11H_HCTLMASK_ISOCH) diff --git a/drivers/usb/misc/ftdi-elan.c b/drivers/usb/misc/ftdi-elan.c index 79a7668..9d0675e 100644 --- a/drivers/usb/misc/ftdi-elan.c +++ b/drivers/usb/misc/ftdi-elan.c @@ -1568,7 +1568,7 @@ static int ftdi_elan_edset_input(struct usb_ftdi *ftdi, u8 ed_number, struct u132_target *target = &ftdi->target[ed]; struct u132_command *command = &ftdi->command[ COMMAND_MASK & ftdi->command_next]; - int remaining_length = urb->transfer_buffer_length - + u32 remaining_length = urb->transfer_buffer_length - urb->actual_length; command->header = 0x82 | (ed << 5); if (remaining_length == 0) { @@ -1702,7 +1702,7 @@ static int ftdi_elan_edset_output(struct usb_ftdi *ftdi, u8 ed_number, | (address << 0); command->width = usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)); - command->follows = min(1024, + command->follows = min_t(u32, 1024, urb->transfer_buffer_length - urb->actual_length); command->value = 0; @@ -1766,7 +1766,7 @@ static int ftdi_elan_edset_single(struct usb_ftdi *ftdi, u8 ed_number, mutex_lock(&ftdi->u132_lock); command_size = ftdi->command_next - ftdi->command_head; if (command_size < COMMAND_SIZE) { - int remaining_length = urb->transfer_buffer_length - + u32 remaining_length = urb->transfer_buffer_length - urb->actual_length; struct u132_target *target = &ftdi->target[ed]; struct u132_command *command = &ftdi->command[ -- cgit v1.1 From 8c209e6782ca0e3046803fc04a5ac01c8c10437a Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 6 Mar 2009 21:31:03 -0800 Subject: USB: make actual_length in struct urb field u32 actual_length should also be a u32 and not a signed value. This patch changes this field to be 'u32' to prevent any potential negative conversion and comparison errors. This triggered a few compiler warning messages when these fields were being used with the min macro, so they have also been fixed up in this patch. Cc: Roel Kluin Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index adeb23f..dcc87aa 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -1947,7 +1947,7 @@ static void ftdi_process_read(struct work_struct *work) priv->prev_status = new_status; } - length = min(PKTSZ, urb->actual_length-packet_offset)-2; + length = min_t(u32, PKTSZ, urb->actual_length-packet_offset)-2; if (length < 0) { dev_err(&port->dev, "%s - bad packet length: %d\n", __func__, length+2); -- cgit v1.1 From 77aa2b5878f48d6ab6e0c412cc9214c845483475 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 4 Mar 2009 16:23:31 -0800 Subject: USB: remove phidget drivers from kernel tree. These devices are better controlled with the LGPL userspace library found at: http://www.phidgets.com/downloads.php?os_id=3 and full documentation at: http://www.phidgets.com/documentation/web/cdoc/index.html Cc: Chester Fitchett Acked-by: Sean Young Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/Kconfig | 39 -- drivers/usb/misc/Makefile | 4 - drivers/usb/misc/phidget.c | 43 -- drivers/usb/misc/phidget.h | 12 - drivers/usb/misc/phidgetkit.c | 740 --------------------------------- drivers/usb/misc/phidgetmotorcontrol.c | 465 --------------------- drivers/usb/misc/phidgetservo.c | 375 ----------------- 7 files changed, 1678 deletions(-) delete mode 100644 drivers/usb/misc/phidget.c delete mode 100644 drivers/usb/misc/phidget.h delete mode 100644 drivers/usb/misc/phidgetkit.c delete mode 100644 drivers/usb/misc/phidgetmotorcontrol.c delete mode 100644 drivers/usb/misc/phidgetservo.c (limited to 'drivers/usb') diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig index e463db5..a68d91a 100644 --- a/drivers/usb/misc/Kconfig +++ b/drivers/usb/misc/Kconfig @@ -135,45 +135,6 @@ config USB_CYTHERM To compile this driver as a module, choose M here: the module will be called cytherm. -config USB_PHIDGET - tristate "USB Phidgets drivers" - depends on USB - help - Say Y here to enable the various drivers for devices from - Phidgets inc. - -config USB_PHIDGETKIT - tristate "USB PhidgetInterfaceKit support" - depends on USB_PHIDGET - help - Say Y here if you want to connect a PhidgetInterfaceKit USB device - from Phidgets Inc. - - To compile this driver as a module, choose M here: the - module will be called phidgetkit. - -config USB_PHIDGETMOTORCONTROL - tristate "USB PhidgetMotorControl support" - depends on USB_PHIDGET - help - Say Y here if you want to connect a PhidgetMotorControl USB device - from Phidgets Inc. - - To compile this driver as a module, choose M here: the - module will be called phidgetmotorcontrol. - -config USB_PHIDGETSERVO - tristate "USB PhidgetServo support" - depends on USB_PHIDGET - help - Say Y here if you want to connect an 1 or 4 Motor PhidgetServo - servo controller version 2.0 or 3.0. - - Phidgets Inc. has a web page at . - - To compile this driver as a module, choose M here: the - module will be called phidgetservo. - config USB_IDMOUSE tristate "Siemens ID USB Mouse Fingerprint sensor support" depends on USB diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile index 1334f7b..0826aab 100644 --- a/drivers/usb/misc/Makefile +++ b/drivers/usb/misc/Makefile @@ -18,10 +18,6 @@ obj-$(CONFIG_USB_LCD) += usblcd.o obj-$(CONFIG_USB_LD) += ldusb.o obj-$(CONFIG_USB_LED) += usbled.o obj-$(CONFIG_USB_LEGOTOWER) += legousbtower.o -obj-$(CONFIG_USB_PHIDGET) += phidget.o -obj-$(CONFIG_USB_PHIDGETKIT) += phidgetkit.o -obj-$(CONFIG_USB_PHIDGETMOTORCONTROL) += phidgetmotorcontrol.o -obj-$(CONFIG_USB_PHIDGETSERVO) += phidgetservo.o obj-$(CONFIG_USB_RIO500) += rio500.o obj-$(CONFIG_USB_TEST) += usbtest.o obj-$(CONFIG_USB_TRANCEVIBRATOR) += trancevibrator.o diff --git a/drivers/usb/misc/phidget.c b/drivers/usb/misc/phidget.c deleted file mode 100644 index 735ed33..0000000 --- a/drivers/usb/misc/phidget.c +++ /dev/null @@ -1,43 +0,0 @@ -/* - * USB Phidgets class - * - * Copyright (C) 2006 Sean Young - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include -#include -#include -#include -#include - -struct class *phidget_class; - -static int __init init_phidget(void) -{ - phidget_class = class_create(THIS_MODULE, "phidget"); - - if (IS_ERR(phidget_class)) - return PTR_ERR(phidget_class); - - return 0; -} - -static void __exit cleanup_phidget(void) -{ - class_destroy(phidget_class); -} - -EXPORT_SYMBOL_GPL(phidget_class); - -module_init(init_phidget); -module_exit(cleanup_phidget); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Sean Young "); -MODULE_DESCRIPTION("Container module for phidget class"); - diff --git a/drivers/usb/misc/phidget.h b/drivers/usb/misc/phidget.h deleted file mode 100644 index c401190..0000000 --- a/drivers/usb/misc/phidget.h +++ /dev/null @@ -1,12 +0,0 @@ -/* - * USB Phidgets class - * - * Copyright (C) 2006 Sean Young - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -extern struct class *phidget_class; diff --git a/drivers/usb/misc/phidgetkit.c b/drivers/usb/misc/phidgetkit.c deleted file mode 100644 index cc8e0a9..0000000 --- a/drivers/usb/misc/phidgetkit.c +++ /dev/null @@ -1,740 +0,0 @@ -/* - * USB PhidgetInterfaceKit driver 1.0 - * - * Copyright (C) 2004, 2006 Sean Young - * Copyright (C) 2005 Daniel Saakes - * Copyright (C) 2004 Greg Kroah-Hartman - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This is a driver for the USB PhidgetInterfaceKit. - */ - -#include -#include -#include -#include -#include -#include - -#include "phidget.h" - -#define DRIVER_AUTHOR "Sean Young " -#define DRIVER_DESC "USB PhidgetInterfaceKit Driver" - -#define USB_VENDOR_ID_GLAB 0x06c2 -#define USB_DEVICE_ID_INTERFACEKIT004 0x0040 -#define USB_DEVICE_ID_INTERFACEKIT01616 0x0044 -#define USB_DEVICE_ID_INTERFACEKIT888 0x0045 -#define USB_DEVICE_ID_INTERFACEKIT047 0x0051 -#define USB_DEVICE_ID_INTERFACEKIT088 0x0053 - -#define USB_VENDOR_ID_WISEGROUP 0x0925 -#define USB_DEVICE_ID_INTERFACEKIT884 0x8201 - -#define MAX_INTERFACES 16 - -#define URB_INT_SIZE 8 - -struct driver_interfacekit { - int sensors; - int inputs; - int outputs; - int has_lcd; - int amnesiac; -}; - -#define ifkit(_sensors, _inputs, _outputs, _lcd, _amnesiac) \ -{ \ - .sensors = _sensors, \ - .inputs = _inputs, \ - .outputs = _outputs, \ - .has_lcd = _lcd, \ - .amnesiac = _amnesiac \ -}; - -static const struct driver_interfacekit ph_004 = ifkit(0, 0, 4, 0, 0); -static const struct driver_interfacekit ph_888n = ifkit(8, 8, 8, 0, 1); -static const struct driver_interfacekit ph_888o = ifkit(8, 8, 8, 0, 0); -static const struct driver_interfacekit ph_047 = ifkit(0, 4, 7, 1, 0); -static const struct driver_interfacekit ph_884 = ifkit(8, 8, 4, 0, 0); -static const struct driver_interfacekit ph_088 = ifkit(0, 8, 8, 1, 0); -static const struct driver_interfacekit ph_01616 = ifkit(0, 16, 16, 0, 0); - -static unsigned long device_no; - -struct interfacekit { - struct usb_device *udev; - struct usb_interface *intf; - struct driver_interfacekit *ifkit; - struct device *dev; - unsigned long outputs; - int dev_no; - u8 inputs[MAX_INTERFACES]; - u16 sensors[MAX_INTERFACES]; - u8 lcd_files_on; - - struct urb *irq; - unsigned char *data; - dma_addr_t data_dma; - - struct delayed_work do_notify; - struct delayed_work do_resubmit; - unsigned long input_events; - unsigned long sensor_events; -}; - -static struct usb_device_id id_table[] = { - {USB_DEVICE(USB_VENDOR_ID_GLAB, USB_DEVICE_ID_INTERFACEKIT004), - .driver_info = (kernel_ulong_t)&ph_004}, - {USB_DEVICE_VER(USB_VENDOR_ID_GLAB, USB_DEVICE_ID_INTERFACEKIT888, 0, 0x814), - .driver_info = (kernel_ulong_t)&ph_888o}, - {USB_DEVICE_VER(USB_VENDOR_ID_GLAB, USB_DEVICE_ID_INTERFACEKIT888, 0x0815, 0xffff), - .driver_info = (kernel_ulong_t)&ph_888n}, - {USB_DEVICE(USB_VENDOR_ID_GLAB, USB_DEVICE_ID_INTERFACEKIT047), - .driver_info = (kernel_ulong_t)&ph_047}, - {USB_DEVICE(USB_VENDOR_ID_GLAB, USB_DEVICE_ID_INTERFACEKIT088), - .driver_info = (kernel_ulong_t)&ph_088}, - {USB_DEVICE(USB_VENDOR_ID_GLAB, USB_DEVICE_ID_INTERFACEKIT01616), - .driver_info = (kernel_ulong_t)&ph_01616}, - {USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_INTERFACEKIT884), - .driver_info = (kernel_ulong_t)&ph_884}, - {} -}; -MODULE_DEVICE_TABLE(usb, id_table); - -static int set_outputs(struct interfacekit *kit) -{ - u8 *buffer; - int retval; - - buffer = kzalloc(4, GFP_KERNEL); - if (!buffer) { - dev_err(&kit->udev->dev, "%s - out of memory\n", __func__); - return -ENOMEM; - } - buffer[0] = (u8)kit->outputs; - buffer[1] = (u8)(kit->outputs >> 8); - - dev_dbg(&kit->udev->dev, "sending data: 0x%04x\n", (u16)kit->outputs); - - retval = usb_control_msg(kit->udev, - usb_sndctrlpipe(kit->udev, 0), - 0x09, 0x21, 0x0200, 0x0000, buffer, 4, 2000); - - if (retval != 4) - dev_err(&kit->udev->dev, "usb_control_msg returned %d\n", - retval); - kfree(buffer); - - if (kit->ifkit->amnesiac) - schedule_delayed_work(&kit->do_resubmit, HZ / 2); - - return retval < 0 ? retval : 0; -} - -static int change_string(struct interfacekit *kit, const char *display, unsigned char row) -{ - unsigned char *buffer; - unsigned char *form_buffer; - int retval = -ENOMEM; - int i,j, len, buf_ptr; - - buffer = kmalloc(8, GFP_KERNEL); - form_buffer = kmalloc(30, GFP_KERNEL); - if ((!buffer) || (!form_buffer)) { - dev_err(&kit->udev->dev, "%s - out of memory\n", __func__); - goto exit; - } - - len = strlen(display); - if (len > 20) - len = 20; - - dev_dbg(&kit->udev->dev, "Setting LCD line %d to %s\n", row, display); - - form_buffer[0] = row * 0x40 + 0x80; - form_buffer[1] = 0x02; - buf_ptr = 2; - for (i = 0; i 7) - len = 7; - else - len = (buf_ptr - i); - for (j = 0; j < len; j++) - buffer[j] = form_buffer[i + j]; - buffer[7] = len; - - retval = usb_control_msg(kit->udev, - usb_sndctrlpipe(kit->udev, 0), - 0x09, 0x21, 0x0200, 0x0000, buffer, 8, 2000); - if (retval < 0) - goto exit; - } - - retval = 0; -exit: - kfree(buffer); - kfree(form_buffer); - - return retval; -} - -#define set_lcd_line(number) \ -static ssize_t lcd_line_##number(struct device *dev, \ - struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - struct interfacekit *kit = dev_get_drvdata(dev); \ - change_string(kit, buf, number - 1); \ - return count; \ -} - -#define lcd_line_attr(number) \ - __ATTR(lcd_line_##number, S_IWUGO, NULL, lcd_line_##number) - -set_lcd_line(1); -set_lcd_line(2); - -static ssize_t set_backlight(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct interfacekit *kit = dev_get_drvdata(dev); - int enabled; - unsigned char *buffer; - int retval = -ENOMEM; - - buffer = kzalloc(8, GFP_KERNEL); - if (!buffer) { - dev_err(&kit->udev->dev, "%s - out of memory\n", __func__); - goto exit; - } - - if (sscanf(buf, "%d", &enabled) < 1) { - retval = -EINVAL; - goto exit; - } - if (enabled) - buffer[0] = 0x01; - buffer[7] = 0x11; - - dev_dbg(&kit->udev->dev, "Setting backlight to %s\n", enabled ? "on" : "off"); - - retval = usb_control_msg(kit->udev, - usb_sndctrlpipe(kit->udev, 0), - 0x09, 0x21, 0x0200, 0x0000, buffer, 8, 2000); - if (retval < 0) - goto exit; - - retval = count; -exit: - kfree(buffer); - return retval; -} - -static struct device_attribute dev_lcd_line_attrs[] = { - lcd_line_attr(1), - lcd_line_attr(2), - __ATTR(backlight, S_IWUGO, NULL, set_backlight) -}; - -static void remove_lcd_files(struct interfacekit *kit) -{ - int i; - - if (kit->lcd_files_on) { - dev_dbg(&kit->udev->dev, "Removing lcd files\n"); - - for (i=0; idev, &dev_lcd_line_attrs[i]); - } -} - -static ssize_t enable_lcd_files(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) -{ - struct interfacekit *kit = dev_get_drvdata(dev); - int enable; - int i, rc; - - if (kit->ifkit->has_lcd == 0) - return -ENODEV; - - if (sscanf(buf, "%d", &enable) < 1) - return -EINVAL; - - if (enable) { - if (!kit->lcd_files_on) { - dev_dbg(&kit->udev->dev, "Adding lcd files\n"); - for (i=0; idev, - &dev_lcd_line_attrs[i]); - if (rc) - goto out; - } - kit->lcd_files_on = 1; - } - } else { - if (kit->lcd_files_on) { - remove_lcd_files(kit); - kit->lcd_files_on = 0; - } - } - - return count; -out: - while (i-- > 0) - device_remove_file(kit->dev, &dev_lcd_line_attrs[i]); - - return rc; -} - -static DEVICE_ATTR(lcd, S_IWUGO, NULL, enable_lcd_files); - -static void interfacekit_irq(struct urb *urb) -{ - struct interfacekit *kit = urb->context; - unsigned char *buffer = kit->data; - int i, level, sensor; - int retval; - int status = urb->status; - - switch (status) { - case 0: /* success */ - break; - case -ECONNRESET: /* unlink */ - case -ENOENT: - case -ESHUTDOWN: - return; - /* -EPIPE: should clear the halt */ - default: /* error */ - goto resubmit; - } - - /* digital inputs */ - if (kit->ifkit->inputs == 16) { - for (i=0; i < 8; i++) { - level = (buffer[0] >> i) & 1; - if (kit->inputs[i] != level) { - kit->inputs[i] = level; - set_bit(i, &kit->input_events); - } - level = (buffer[1] >> i) & 1; - if (kit->inputs[8 + i] != level) { - kit->inputs[8 + i] = level; - set_bit(8 + i, &kit->input_events); - } - } - } - else if (kit->ifkit->inputs == 8) { - for (i=0; i < 8; i++) { - level = (buffer[1] >> i) & 1; - if (kit->inputs[i] != level) { - kit->inputs[i] = level; - set_bit(i, &kit->input_events); - } - } - } - - /* analog inputs */ - if (kit->ifkit->sensors) { - sensor = (buffer[0] & 1) ? 4 : 0; - - level = buffer[2] + (buffer[3] & 0x0f) * 256; - if (level != kit->sensors[sensor]) { - kit->sensors[sensor] = level; - set_bit(sensor, &kit->sensor_events); - } - sensor++; - level = buffer[4] + (buffer[3] & 0xf0) * 16; - if (level != kit->sensors[sensor]) { - kit->sensors[sensor] = level; - set_bit(sensor, &kit->sensor_events); - } - sensor++; - level = buffer[5] + (buffer[6] & 0x0f) * 256; - if (level != kit->sensors[sensor]) { - kit->sensors[sensor] = level; - set_bit(sensor, &kit->sensor_events); - } - sensor++; - level = buffer[7] + (buffer[6] & 0xf0) * 16; - if (level != kit->sensors[sensor]) { - kit->sensors[sensor] = level; - set_bit(sensor, &kit->sensor_events); - } - } - - if (kit->input_events || kit->sensor_events) - schedule_delayed_work(&kit->do_notify, 0); - -resubmit: - retval = usb_submit_urb(urb, GFP_ATOMIC); - if (retval) - err("can't resubmit intr, %s-%s/interfacekit0, retval %d", - kit->udev->bus->bus_name, - kit->udev->devpath, retval); -} - -static void do_notify(struct work_struct *work) -{ - struct interfacekit *kit = - container_of(work, struct interfacekit, do_notify.work); - int i; - char sysfs_file[8]; - - for (i=0; iifkit->inputs; i++) { - if (test_and_clear_bit(i, &kit->input_events)) { - sprintf(sysfs_file, "input%d", i + 1); - sysfs_notify(&kit->dev->kobj, NULL, sysfs_file); - } - } - - for (i=0; iifkit->sensors; i++) { - if (test_and_clear_bit(i, &kit->sensor_events)) { - sprintf(sysfs_file, "sensor%d", i + 1); - sysfs_notify(&kit->dev->kobj, NULL, sysfs_file); - } - } -} - -static void do_resubmit(struct work_struct *work) -{ - struct interfacekit *kit = - container_of(work, struct interfacekit, do_resubmit.work); - set_outputs(kit); -} - -#define show_set_output(value) \ -static ssize_t set_output##value(struct device *dev, \ - struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - struct interfacekit *kit = dev_get_drvdata(dev); \ - int enable; \ - int retval; \ - \ - if (sscanf(buf, "%d", &enable) < 1) \ - return -EINVAL; \ - \ - if (enable) \ - set_bit(value - 1, &kit->outputs); \ - else \ - clear_bit(value - 1, &kit->outputs); \ - \ - retval = set_outputs(kit); \ - \ - return retval ? retval : count; \ -} \ - \ -static ssize_t show_output##value(struct device *dev, \ - struct device_attribute *attr, \ - char *buf) \ -{ \ - struct interfacekit *kit = dev_get_drvdata(dev); \ - \ - return sprintf(buf, "%d\n", !!test_bit(value - 1, &kit->outputs));\ -} - -#define output_attr(value) \ - __ATTR(output##value, S_IWUGO | S_IRUGO, \ - show_output##value, set_output##value) - -show_set_output(1); -show_set_output(2); -show_set_output(3); -show_set_output(4); -show_set_output(5); -show_set_output(6); -show_set_output(7); -show_set_output(8); -show_set_output(9); -show_set_output(10); -show_set_output(11); -show_set_output(12); -show_set_output(13); -show_set_output(14); -show_set_output(15); -show_set_output(16); - -static struct device_attribute dev_output_attrs[] = { - output_attr(1), output_attr(2), output_attr(3), output_attr(4), - output_attr(5), output_attr(6), output_attr(7), output_attr(8), - output_attr(9), output_attr(10), output_attr(11), output_attr(12), - output_attr(13), output_attr(14), output_attr(15), output_attr(16) -}; - -#define show_input(value) \ -static ssize_t show_input##value(struct device *dev, \ - struct device_attribute *attr, char *buf) \ -{ \ - struct interfacekit *kit = dev_get_drvdata(dev); \ - \ - return sprintf(buf, "%d\n", (int)kit->inputs[value - 1]); \ -} - -#define input_attr(value) \ - __ATTR(input##value, S_IRUGO, show_input##value, NULL) - -show_input(1); -show_input(2); -show_input(3); -show_input(4); -show_input(5); -show_input(6); -show_input(7); -show_input(8); -show_input(9); -show_input(10); -show_input(11); -show_input(12); -show_input(13); -show_input(14); -show_input(15); -show_input(16); - -static struct device_attribute dev_input_attrs[] = { - input_attr(1), input_attr(2), input_attr(3), input_attr(4), - input_attr(5), input_attr(6), input_attr(7), input_attr(8), - input_attr(9), input_attr(10), input_attr(11), input_attr(12), - input_attr(13), input_attr(14), input_attr(15), input_attr(16) -}; - -#define show_sensor(value) \ -static ssize_t show_sensor##value(struct device *dev, \ - struct device_attribute *attr, \ - char *buf) \ -{ \ - struct interfacekit *kit = dev_get_drvdata(dev); \ - \ - return sprintf(buf, "%d\n", (int)kit->sensors[value - 1]); \ -} - -#define sensor_attr(value) \ - __ATTR(sensor##value, S_IRUGO, show_sensor##value, NULL) - -show_sensor(1); -show_sensor(2); -show_sensor(3); -show_sensor(4); -show_sensor(5); -show_sensor(6); -show_sensor(7); -show_sensor(8); - -static struct device_attribute dev_sensor_attrs[] = { - sensor_attr(1), sensor_attr(2), sensor_attr(3), sensor_attr(4), - sensor_attr(5), sensor_attr(6), sensor_attr(7), sensor_attr(8) -}; - -static int interfacekit_probe(struct usb_interface *intf, const struct usb_device_id *id) -{ - struct usb_device *dev = interface_to_usbdev(intf); - struct usb_host_interface *interface; - struct usb_endpoint_descriptor *endpoint; - struct interfacekit *kit; - struct driver_interfacekit *ifkit; - int pipe, maxp, rc = -ENOMEM; - int bit, value, i; - - ifkit = (struct driver_interfacekit *)id->driver_info; - if (!ifkit) - return -ENODEV; - - interface = intf->cur_altsetting; - if (interface->desc.bNumEndpoints != 1) - return -ENODEV; - - endpoint = &interface->endpoint[0].desc; - if (!usb_endpoint_dir_in(endpoint)) - return -ENODEV; - /* - * bmAttributes - */ - pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress); - maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe)); - - kit = kzalloc(sizeof(*kit), GFP_KERNEL); - if (!kit) - goto out; - - kit->dev_no = -1; - kit->ifkit = ifkit; - kit->data = usb_buffer_alloc(dev, URB_INT_SIZE, GFP_ATOMIC, &kit->data_dma); - if (!kit->data) - goto out; - - kit->irq = usb_alloc_urb(0, GFP_KERNEL); - if (!kit->irq) - goto out; - - kit->udev = usb_get_dev(dev); - kit->intf = intf; - INIT_DELAYED_WORK(&kit->do_notify, do_notify); - INIT_DELAYED_WORK(&kit->do_resubmit, do_resubmit); - usb_fill_int_urb(kit->irq, kit->udev, pipe, kit->data, - maxp > URB_INT_SIZE ? URB_INT_SIZE : maxp, - interfacekit_irq, kit, endpoint->bInterval); - kit->irq->transfer_dma = kit->data_dma; - kit->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - - usb_set_intfdata(intf, kit); - - do { - bit = find_first_zero_bit(&device_no, sizeof(device_no)); - value = test_and_set_bit(bit, &device_no); - } while(value); - kit->dev_no = bit; - - kit->dev = device_create(phidget_class, &kit->udev->dev, MKDEV(0, 0), - kit, "interfacekit%d", kit->dev_no); - if (IS_ERR(kit->dev)) { - rc = PTR_ERR(kit->dev); - kit->dev = NULL; - goto out; - } - - if (usb_submit_urb(kit->irq, GFP_KERNEL)) { - rc = -EIO; - goto out; - } - - for (i=0; ioutputs; i++ ) { - rc = device_create_file(kit->dev, &dev_output_attrs[i]); - if (rc) - goto out2; - } - - for (i=0; iinputs; i++ ) { - rc = device_create_file(kit->dev, &dev_input_attrs[i]); - if (rc) - goto out3; - } - - for (i=0; isensors; i++ ) { - rc = device_create_file(kit->dev, &dev_sensor_attrs[i]); - if (rc) - goto out4; - } - - if (ifkit->has_lcd) { - rc = device_create_file(kit->dev, &dev_attr_lcd); - if (rc) - goto out4; - - } - - dev_info(&intf->dev, "USB PhidgetInterfaceKit %d/%d/%d attached\n", - ifkit->sensors, ifkit->inputs, ifkit->outputs); - - return 0; - -out4: - while (i-- > 0) - device_remove_file(kit->dev, &dev_sensor_attrs[i]); - - i = ifkit->inputs; -out3: - while (i-- > 0) - device_remove_file(kit->dev, &dev_input_attrs[i]); - - i = ifkit->outputs; -out2: - while (i-- > 0) - device_remove_file(kit->dev, &dev_output_attrs[i]); -out: - if (kit) { - usb_free_urb(kit->irq); - if (kit->data) - usb_buffer_free(dev, URB_INT_SIZE, kit->data, kit->data_dma); - if (kit->dev) - device_unregister(kit->dev); - if (kit->dev_no >= 0) - clear_bit(kit->dev_no, &device_no); - - kfree(kit); - } - - return rc; -} - -static void interfacekit_disconnect(struct usb_interface *interface) -{ - struct interfacekit *kit; - int i; - - kit = usb_get_intfdata(interface); - usb_set_intfdata(interface, NULL); - if (!kit) - return; - - usb_kill_urb(kit->irq); - usb_free_urb(kit->irq); - usb_buffer_free(kit->udev, URB_INT_SIZE, kit->data, kit->data_dma); - - cancel_delayed_work(&kit->do_notify); - cancel_delayed_work(&kit->do_resubmit); - - for (i=0; iifkit->outputs; i++) - device_remove_file(kit->dev, &dev_output_attrs[i]); - - for (i=0; iifkit->inputs; i++) - device_remove_file(kit->dev, &dev_input_attrs[i]); - - for (i=0; iifkit->sensors; i++) - device_remove_file(kit->dev, &dev_sensor_attrs[i]); - - if (kit->ifkit->has_lcd) { - device_remove_file(kit->dev, &dev_attr_lcd); - remove_lcd_files(kit); - } - - device_unregister(kit->dev); - - dev_info(&interface->dev, "USB PhidgetInterfaceKit %d/%d/%d detached\n", - kit->ifkit->sensors, kit->ifkit->inputs, kit->ifkit->outputs); - - usb_put_dev(kit->udev); - clear_bit(kit->dev_no, &device_no); - - kfree(kit); -} - -static struct usb_driver interfacekit_driver = { - .name = "phidgetkit", - .probe = interfacekit_probe, - .disconnect = interfacekit_disconnect, - .id_table = id_table -}; - -static int __init interfacekit_init(void) -{ - int retval = 0; - - retval = usb_register(&interfacekit_driver); - if (retval) - err("usb_register failed. Error number %d", retval); - - return retval; -} - -static void __exit interfacekit_exit(void) -{ - usb_deregister(&interfacekit_driver); -} - -module_init(interfacekit_init); -module_exit(interfacekit_exit); - -MODULE_AUTHOR(DRIVER_AUTHOR); -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_LICENSE("GPL"); diff --git a/drivers/usb/misc/phidgetmotorcontrol.c b/drivers/usb/misc/phidgetmotorcontrol.c deleted file mode 100644 index 38088b4..0000000 --- a/drivers/usb/misc/phidgetmotorcontrol.c +++ /dev/null @@ -1,465 +0,0 @@ -/* - * USB Phidget MotorControl driver - * - * Copyright (C) 2006 Sean Young - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include -#include -#include -#include -#include - -#include "phidget.h" - -#define DRIVER_AUTHOR "Sean Young " -#define DRIVER_DESC "USB PhidgetMotorControl Driver" - -#define USB_VENDOR_ID_GLAB 0x06c2 -#define USB_DEVICE_ID_MOTORCONTROL 0x0058 - -#define URB_INT_SIZE 8 - -static unsigned long device_no; - -struct motorcontrol { - struct usb_device *udev; - struct usb_interface *intf; - struct device *dev; - int dev_no; - u8 inputs[4]; - s8 desired_speed[2]; - s8 speed[2]; - s16 _current[2]; - s8 acceleration[2]; - struct urb *irq; - unsigned char *data; - dma_addr_t data_dma; - - struct delayed_work do_notify; - unsigned long input_events; - unsigned long speed_events; - unsigned long exceed_events; -}; - -static struct usb_device_id id_table[] = { - { USB_DEVICE(USB_VENDOR_ID_GLAB, USB_DEVICE_ID_MOTORCONTROL) }, - {} -}; -MODULE_DEVICE_TABLE(usb, id_table); - -static int set_motor(struct motorcontrol *mc, int motor) -{ - u8 *buffer; - int speed, speed2, acceleration; - int retval; - - buffer = kzalloc(8, GFP_KERNEL); - if (!buffer) { - dev_err(&mc->intf->dev, "%s - out of memory\n", __func__); - return -ENOMEM; - } - - acceleration = mc->acceleration[motor] * 10; - /* -127 <= speed <= 127 */ - speed = (mc->desired_speed[motor] * 127) / 100; - /* -0x7300 <= speed2 <= 0x7300 */ - speed2 = (mc->desired_speed[motor] * 230 * 128) / 100; - - buffer[0] = motor; - buffer[1] = speed; - buffer[2] = acceleration >> 8; - buffer[3] = acceleration; - buffer[4] = speed2 >> 8; - buffer[5] = speed2; - - retval = usb_control_msg(mc->udev, - usb_sndctrlpipe(mc->udev, 0), - 0x09, 0x21, 0x0200, 0x0000, buffer, 8, 2000); - - if (retval != 8) - dev_err(&mc->intf->dev, "usb_control_msg returned %d\n", - retval); - kfree(buffer); - - return retval < 0 ? retval : 0; -} - -static void motorcontrol_irq(struct urb *urb) -{ - struct motorcontrol *mc = urb->context; - unsigned char *buffer = mc->data; - int i, level; - int retval; - int status = urb->status;; - - switch (status) { - case 0: /* success */ - break; - case -ECONNRESET: /* unlink */ - case -ENOENT: - case -ESHUTDOWN: - return; - /* -EPIPE: should clear the halt */ - default: /* error */ - goto resubmit; - } - - /* digital inputs */ - for (i=0; i<4; i++) { - level = (buffer[0] >> i) & 1; - if (mc->inputs[i] != level) { - mc->inputs[i] = level; - set_bit(i, &mc->input_events); - } - } - - /* motor speed */ - if (buffer[2] == 0) { - for (i=0; i<2; i++) { - level = ((s8)buffer[4+i]) * 100 / 127; - if (mc->speed[i] != level) { - mc->speed[i] = level; - set_bit(i, &mc->speed_events); - } - } - } else { - int index = buffer[3] & 1; - - level = ((s8)buffer[4] << 8) | buffer[5]; - level = level * 100 / 29440; - if (mc->speed[index] != level) { - mc->speed[index] = level; - set_bit(index, &mc->speed_events); - } - - level = ((s8)buffer[6] << 8) | buffer[7]; - mc->_current[index] = level * 100 / 1572; - } - - if (buffer[1] & 1) - set_bit(0, &mc->exceed_events); - - if (buffer[1] & 2) - set_bit(1, &mc->exceed_events); - - if (mc->input_events || mc->exceed_events || mc->speed_events) - schedule_delayed_work(&mc->do_notify, 0); - -resubmit: - retval = usb_submit_urb(urb, GFP_ATOMIC); - if (retval) - dev_err(&mc->intf->dev, - "can't resubmit intr, %s-%s/motorcontrol0, retval %d\n", - mc->udev->bus->bus_name, - mc->udev->devpath, retval); -} - -static void do_notify(struct work_struct *work) -{ - struct motorcontrol *mc = - container_of(work, struct motorcontrol, do_notify.work); - int i; - char sysfs_file[8]; - - for (i=0; i<4; i++) { - if (test_and_clear_bit(i, &mc->input_events)) { - sprintf(sysfs_file, "input%d", i); - sysfs_notify(&mc->dev->kobj, NULL, sysfs_file); - } - } - - for (i=0; i<2; i++) { - if (test_and_clear_bit(i, &mc->speed_events)) { - sprintf(sysfs_file, "speed%d", i); - sysfs_notify(&mc->dev->kobj, NULL, sysfs_file); - } - } - - for (i=0; i<2; i++) { - if (test_and_clear_bit(i, &mc->exceed_events)) - dev_warn(&mc->intf->dev, - "motor #%d exceeds 1.5 Amp current limit\n", i); - } -} - -#define show_set_speed(value) \ -static ssize_t set_speed##value(struct device *dev, \ - struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - struct motorcontrol *mc = dev_get_drvdata(dev); \ - int speed; \ - int retval; \ - \ - if (sscanf(buf, "%d", &speed) < 1) \ - return -EINVAL; \ - \ - if (speed < -100 || speed > 100) \ - return -EINVAL; \ - \ - mc->desired_speed[value] = speed; \ - \ - retval = set_motor(mc, value); \ - \ - return retval ? retval : count; \ -} \ - \ -static ssize_t show_speed##value(struct device *dev, \ - struct device_attribute *attr, \ - char *buf) \ -{ \ - struct motorcontrol *mc = dev_get_drvdata(dev); \ - \ - return sprintf(buf, "%d\n", mc->speed[value]); \ -} - -#define speed_attr(value) \ - __ATTR(speed##value, S_IWUGO | S_IRUGO, \ - show_speed##value, set_speed##value) - -show_set_speed(0); -show_set_speed(1); - -#define show_set_acceleration(value) \ -static ssize_t set_acceleration##value(struct device *dev, \ - struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - struct motorcontrol *mc = dev_get_drvdata(dev); \ - int acceleration; \ - int retval; \ - \ - if (sscanf(buf, "%d", &acceleration) < 1) \ - return -EINVAL; \ - \ - if (acceleration < 0 || acceleration > 100) \ - return -EINVAL; \ - \ - mc->acceleration[value] = acceleration; \ - \ - retval = set_motor(mc, value); \ - \ - return retval ? retval : count; \ -} \ - \ -static ssize_t show_acceleration##value(struct device *dev, \ - struct device_attribute *attr, \ - char *buf) \ -{ \ - struct motorcontrol *mc = dev_get_drvdata(dev); \ - \ - return sprintf(buf, "%d\n", mc->acceleration[value]); \ -} - -#define acceleration_attr(value) \ - __ATTR(acceleration##value, S_IWUGO | S_IRUGO, \ - show_acceleration##value, set_acceleration##value) - -show_set_acceleration(0); -show_set_acceleration(1); - -#define show_current(value) \ -static ssize_t show_current##value(struct device *dev, \ - struct device_attribute *attr, \ - char *buf) \ -{ \ - struct motorcontrol *mc = dev_get_drvdata(dev); \ - \ - return sprintf(buf, "%dmA\n", (int)mc->_current[value]); \ -} - -#define current_attr(value) \ - __ATTR(current##value, S_IRUGO, show_current##value, NULL) - -show_current(0); -show_current(1); - -#define show_input(value) \ -static ssize_t show_input##value(struct device *dev, \ - struct device_attribute *attr, \ - char *buf) \ -{ \ - struct motorcontrol *mc = dev_get_drvdata(dev); \ - \ - return sprintf(buf, "%d\n", (int)mc->inputs[value]); \ -} - -#define input_attr(value) \ - __ATTR(input##value, S_IRUGO, show_input##value, NULL) - -show_input(0); -show_input(1); -show_input(2); -show_input(3); - -static struct device_attribute dev_attrs[] = { - input_attr(0), - input_attr(1), - input_attr(2), - input_attr(3), - speed_attr(0), - speed_attr(1), - acceleration_attr(0), - acceleration_attr(1), - current_attr(0), - current_attr(1) -}; - -static int motorcontrol_probe(struct usb_interface *intf, const struct usb_device_id *id) -{ - struct usb_device *dev = interface_to_usbdev(intf); - struct usb_host_interface *interface; - struct usb_endpoint_descriptor *endpoint; - struct motorcontrol *mc; - int pipe, maxp, rc = -ENOMEM; - int bit, value, i; - - interface = intf->cur_altsetting; - if (interface->desc.bNumEndpoints != 1) - return -ENODEV; - - endpoint = &interface->endpoint[0].desc; - if (!usb_endpoint_dir_in(endpoint)) - return -ENODEV; - - /* - * bmAttributes - */ - pipe = usb_rcvintpipe(dev, endpoint->bEndpointAddress); - maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe)); - - mc = kzalloc(sizeof(*mc), GFP_KERNEL); - if (!mc) - goto out; - - mc->dev_no = -1; - mc->data = usb_buffer_alloc(dev, URB_INT_SIZE, GFP_ATOMIC, &mc->data_dma); - if (!mc->data) - goto out; - - mc->irq = usb_alloc_urb(0, GFP_KERNEL); - if (!mc->irq) - goto out; - - mc->udev = usb_get_dev(dev); - mc->intf = intf; - mc->acceleration[0] = mc->acceleration[1] = 10; - INIT_DELAYED_WORK(&mc->do_notify, do_notify); - usb_fill_int_urb(mc->irq, mc->udev, pipe, mc->data, - maxp > URB_INT_SIZE ? URB_INT_SIZE : maxp, - motorcontrol_irq, mc, endpoint->bInterval); - mc->irq->transfer_dma = mc->data_dma; - mc->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - - usb_set_intfdata(intf, mc); - - do { - bit = find_first_zero_bit(&device_no, sizeof(device_no)); - value = test_and_set_bit(bit, &device_no); - } while(value); - mc->dev_no = bit; - - mc->dev = device_create(phidget_class, &mc->udev->dev, MKDEV(0, 0), mc, - "motorcontrol%d", mc->dev_no); - if (IS_ERR(mc->dev)) { - rc = PTR_ERR(mc->dev); - mc->dev = NULL; - goto out; - } - - if (usb_submit_urb(mc->irq, GFP_KERNEL)) { - rc = -EIO; - goto out; - } - - for (i=0; idev, &dev_attrs[i]); - if (rc) - goto out2; - } - - dev_info(&intf->dev, "USB PhidgetMotorControl attached\n"); - - return 0; -out2: - while (i-- > 0) - device_remove_file(mc->dev, &dev_attrs[i]); -out: - if (mc) { - usb_free_urb(mc->irq); - if (mc->data) - usb_buffer_free(dev, URB_INT_SIZE, mc->data, mc->data_dma); - if (mc->dev) - device_unregister(mc->dev); - if (mc->dev_no >= 0) - clear_bit(mc->dev_no, &device_no); - - kfree(mc); - } - - return rc; -} - -static void motorcontrol_disconnect(struct usb_interface *interface) -{ - struct motorcontrol *mc; - int i; - - mc = usb_get_intfdata(interface); - usb_set_intfdata(interface, NULL); - if (!mc) - return; - - usb_kill_urb(mc->irq); - usb_free_urb(mc->irq); - usb_buffer_free(mc->udev, URB_INT_SIZE, mc->data, mc->data_dma); - - cancel_delayed_work(&mc->do_notify); - - for (i=0; idev, &dev_attrs[i]); - - device_unregister(mc->dev); - - usb_put_dev(mc->udev); - clear_bit(mc->dev_no, &device_no); - kfree(mc); - - dev_info(&interface->dev, "USB PhidgetMotorControl detached\n"); -} - -static struct usb_driver motorcontrol_driver = { - .name = "phidgetmotorcontrol", - .probe = motorcontrol_probe, - .disconnect = motorcontrol_disconnect, - .id_table = id_table -}; - -static int __init motorcontrol_init(void) -{ - int retval = 0; - - retval = usb_register(&motorcontrol_driver); - if (retval) - err("usb_register failed. Error number %d", retval); - - return retval; -} - -static void __exit motorcontrol_exit(void) -{ - usb_deregister(&motorcontrol_driver); -} - -module_init(motorcontrol_init); -module_exit(motorcontrol_exit); - -MODULE_AUTHOR(DRIVER_AUTHOR); -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_LICENSE("GPL"); diff --git a/drivers/usb/misc/phidgetservo.c b/drivers/usb/misc/phidgetservo.c deleted file mode 100644 index bef6fe1..0000000 --- a/drivers/usb/misc/phidgetservo.c +++ /dev/null @@ -1,375 +0,0 @@ -/* - * USB PhidgetServo driver 1.0 - * - * Copyright (C) 2004, 2006 Sean Young - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This is a driver for the USB PhidgetServo version 2.0 and 3.0 servo - * controllers available at: http://www.phidgets.com/ - * - * Note that the driver takes input as: degrees.minutes - * - * CAUTION: Generally you should use 0 < degrees < 180 as anything else - * is probably beyond the range of your servo and may damage it. - */ - -#include -#include -#include -#include -#include -#include - -#include "phidget.h" - -#define DRIVER_AUTHOR "Sean Young " -#define DRIVER_DESC "USB PhidgetServo Driver" - -#define VENDOR_ID_GLAB 0x06c2 -#define DEVICE_ID_GLAB_PHIDGETSERVO_QUAD 0x0038 -#define DEVICE_ID_GLAB_PHIDGETSERVO_UNI 0x0039 - -#define VENDOR_ID_WISEGROUP 0x0925 -#define VENDOR_ID_WISEGROUP_PHIDGETSERVO_QUAD 0x8101 -#define VENDOR_ID_WISEGROUP_PHIDGETSERVO_UNI 0x8104 - -#define SERVO_VERSION_30 0x01 -#define SERVO_COUNT_QUAD 0x02 - -static struct usb_device_id id_table[] = { - { - USB_DEVICE(VENDOR_ID_GLAB, DEVICE_ID_GLAB_PHIDGETSERVO_QUAD), - .driver_info = SERVO_VERSION_30 | SERVO_COUNT_QUAD - }, - { - USB_DEVICE(VENDOR_ID_GLAB, DEVICE_ID_GLAB_PHIDGETSERVO_UNI), - .driver_info = SERVO_VERSION_30 - }, - { - USB_DEVICE(VENDOR_ID_WISEGROUP, - VENDOR_ID_WISEGROUP_PHIDGETSERVO_QUAD), - .driver_info = SERVO_COUNT_QUAD - }, - { - USB_DEVICE(VENDOR_ID_WISEGROUP, - VENDOR_ID_WISEGROUP_PHIDGETSERVO_UNI), - .driver_info = 0 - }, - {} -}; - -MODULE_DEVICE_TABLE(usb, id_table); - -static int unsigned long device_no; - -struct phidget_servo { - struct usb_device *udev; - struct device *dev; - int dev_no; - ulong type; - int pulse[4]; - int degrees[4]; - int minutes[4]; -}; - -static int -change_position_v30(struct phidget_servo *servo, int servo_no, int degrees, - int minutes) -{ - int retval; - unsigned char *buffer; - - if (degrees < -23 || degrees > 362) - return -EINVAL; - - buffer = kmalloc(6, GFP_KERNEL); - if (!buffer) { - dev_err(&servo->udev->dev, "%s - out of memory\n", - __func__); - return -ENOMEM; - } - - /* - * pulse = 0 - 4095 - * angle = 0 - 180 degrees - * - * pulse = angle * 10.6 + 243.8 - */ - servo->pulse[servo_no] = ((degrees*60 + minutes)*106 + 2438*60)/600; - servo->degrees[servo_no]= degrees; - servo->minutes[servo_no]= minutes; - - /* - * The PhidgetServo v3.0 is controlled by sending 6 bytes, - * 4 * 12 bits for each servo. - * - * low = lower 8 bits pulse - * high = higher 4 bits pulse - * - * offset bits - * +---+-----------------+ - * | 0 | low 0 | - * +---+--------+--------+ - * | 1 | high 1 | high 0 | - * +---+--------+--------+ - * | 2 | low 1 | - * +---+-----------------+ - * | 3 | low 2 | - * +---+--------+--------+ - * | 4 | high 3 | high 2 | - * +---+--------+--------+ - * | 5 | low 3 | - * +---+-----------------+ - */ - - buffer[0] = servo->pulse[0] & 0xff; - buffer[1] = (servo->pulse[0] >> 8 & 0x0f) - | (servo->pulse[1] >> 4 & 0xf0); - buffer[2] = servo->pulse[1] & 0xff; - buffer[3] = servo->pulse[2] & 0xff; - buffer[4] = (servo->pulse[2] >> 8 & 0x0f) - | (servo->pulse[3] >> 4 & 0xf0); - buffer[5] = servo->pulse[3] & 0xff; - - dev_dbg(&servo->udev->dev, - "data: %02x %02x %02x %02x %02x %02x\n", - buffer[0], buffer[1], buffer[2], - buffer[3], buffer[4], buffer[5]); - - retval = usb_control_msg(servo->udev, - usb_sndctrlpipe(servo->udev, 0), - 0x09, 0x21, 0x0200, 0x0000, buffer, 6, 2000); - - kfree(buffer); - - return retval; -} - -static int -change_position_v20(struct phidget_servo *servo, int servo_no, int degrees, - int minutes) -{ - int retval; - unsigned char *buffer; - - if (degrees < -23 || degrees > 278) - return -EINVAL; - - buffer = kmalloc(2, GFP_KERNEL); - if (!buffer) { - dev_err(&servo->udev->dev, "%s - out of memory\n", - __func__); - return -ENOMEM; - } - - /* - * angle = 0 - 180 degrees - * pulse = angle + 23 - */ - servo->pulse[servo_no]= degrees + 23; - servo->degrees[servo_no]= degrees; - servo->minutes[servo_no]= 0; - - /* - * The PhidgetServo v2.0 is controlled by sending two bytes. The - * first byte is the servo number xor'ed with 2: - * - * servo 0 = 2 - * servo 1 = 3 - * servo 2 = 0 - * servo 3 = 1 - * - * The second byte is the position. - */ - - buffer[0] = servo_no ^ 2; - buffer[1] = servo->pulse[servo_no]; - - dev_dbg(&servo->udev->dev, "data: %02x %02x\n", buffer[0], buffer[1]); - - retval = usb_control_msg(servo->udev, - usb_sndctrlpipe(servo->udev, 0), - 0x09, 0x21, 0x0200, 0x0000, buffer, 2, 2000); - - kfree(buffer); - - return retval; -} - -#define show_set(value) \ -static ssize_t set_servo##value (struct device *dev, \ - struct device_attribute *attr, \ - const char *buf, size_t count) \ -{ \ - int degrees, minutes, retval; \ - struct phidget_servo *servo = dev_get_drvdata(dev); \ - \ - minutes = 0; \ - /* must at least convert degrees */ \ - if (sscanf(buf, "%d.%d", °rees, &minutes) < 1) { \ - return -EINVAL; \ - } \ - \ - if (minutes < 0 || minutes > 59) \ - return -EINVAL; \ - \ - if (servo->type & SERVO_VERSION_30) \ - retval = change_position_v30(servo, value, degrees, \ - minutes); \ - else \ - retval = change_position_v20(servo, value, degrees, \ - minutes); \ - \ - return retval < 0 ? retval : count; \ -} \ - \ -static ssize_t show_servo##value (struct device *dev, \ - struct device_attribute *attr, \ - char *buf) \ -{ \ - struct phidget_servo *servo = dev_get_drvdata(dev); \ - \ - return sprintf(buf, "%d.%02d\n", servo->degrees[value], \ - servo->minutes[value]); \ -} - -#define servo_attr(value) \ - __ATTR(servo##value, S_IWUGO | S_IRUGO, \ - show_servo##value, set_servo##value) -show_set(0); -show_set(1); -show_set(2); -show_set(3); - -static struct device_attribute dev_attrs[] = { - servo_attr(0), servo_attr(1), servo_attr(2), servo_attr(3) -}; - -static int -servo_probe(struct usb_interface *interface, const struct usb_device_id *id) -{ - struct usb_device *udev = interface_to_usbdev(interface); - struct phidget_servo *dev; - int bit, value, rc; - int servo_count, i; - - dev = kzalloc(sizeof (struct phidget_servo), GFP_KERNEL); - if (dev == NULL) { - dev_err(&interface->dev, "%s - out of memory\n", __func__); - rc = -ENOMEM; - goto out; - } - - dev->udev = usb_get_dev(udev); - dev->type = id->driver_info; - dev->dev_no = -1; - usb_set_intfdata(interface, dev); - - do { - bit = find_first_zero_bit(&device_no, sizeof(device_no)); - value = test_and_set_bit(bit, &device_no); - } while (value); - dev->dev_no = bit; - - dev->dev = device_create(phidget_class, &dev->udev->dev, MKDEV(0, 0), - dev, "servo%d", dev->dev_no); - if (IS_ERR(dev->dev)) { - rc = PTR_ERR(dev->dev); - dev->dev = NULL; - goto out; - } - - servo_count = dev->type & SERVO_COUNT_QUAD ? 4 : 1; - - for (i=0; idev, &dev_attrs[i]); - if (rc) - goto out2; - } - - dev_info(&interface->dev, "USB %d-Motor PhidgetServo v%d.0 attached\n", - servo_count, dev->type & SERVO_VERSION_30 ? 3 : 2); - - if (!(dev->type & SERVO_VERSION_30)) - dev_info(&interface->dev, - "WARNING: v2.0 not tested! Please report if it works.\n"); - - return 0; -out2: - while (i-- > 0) - device_remove_file(dev->dev, &dev_attrs[i]); -out: - if (dev) { - if (dev->dev) - device_unregister(dev->dev); - if (dev->dev_no >= 0) - clear_bit(dev->dev_no, &device_no); - - kfree(dev); - } - - return rc; -} - -static void -servo_disconnect(struct usb_interface *interface) -{ - struct phidget_servo *dev; - int servo_count, i; - - dev = usb_get_intfdata(interface); - usb_set_intfdata(interface, NULL); - - if (!dev) - return; - - servo_count = dev->type & SERVO_COUNT_QUAD ? 4 : 1; - - for (i=0; idev, &dev_attrs[i]); - - device_unregister(dev->dev); - usb_put_dev(dev->udev); - - dev_info(&interface->dev, "USB %d-Motor PhidgetServo v%d.0 detached\n", - servo_count, dev->type & SERVO_VERSION_30 ? 3 : 2); - - clear_bit(dev->dev_no, &device_no); - kfree(dev); -} - -static struct usb_driver servo_driver = { - .name = "phidgetservo", - .probe = servo_probe, - .disconnect = servo_disconnect, - .id_table = id_table -}; - -static int __init -phidget_servo_init(void) -{ - int retval; - - retval = usb_register(&servo_driver); - if (retval) - err("usb_register failed. Error number %d", retval); - - return retval; -} - -static void __exit -phidget_servo_exit(void) -{ - usb_deregister(&servo_driver); -} - -module_init(phidget_servo_init); -module_exit(phidget_servo_exit); - -MODULE_AUTHOR(DRIVER_AUTHOR); -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_LICENSE("GPL"); -- cgit v1.1 From 4fe0387afa893b44c5a21b9bfbb0888354ef4656 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 26 Feb 2009 10:21:02 -0500 Subject: USB: don't send Set-Interface after reset This patch (as1221) changes the way usbcore reinitializes a device following a reset or a reset-resume. Currently we call usb_set_interface() for every interface in the active configuration; this is to put the interface into the same altsetting as before the reset and to make sure that the host's endpoint state matches the device's endpoint state. However, sending a Set-Interface request is a waste of time if an interface was already in altsetting 0 before the reset, since it is certainly in altsetting 0 afterward. In addition, many devices can't handle Set-Interface requests -- they crash when they receive them. So instead, the patch adds code to check each interface. If the interface wasn't in altsetting 0 before the reset, we go head with the Set-Interface request as before. But if it was then we skip sending the Set-Interface request, and we clear out the host-side endpoint state by calling usb_disable_interface() followed by usb_enable_interface(). The patch also adds a couple of new comments to explain what's going on. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 23 ++++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index f17d9eb..81eb3e6 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -3393,10 +3393,10 @@ static int usb_reset_and_verify_device(struct usb_device *udev) udev->descriptor = descriptor; /* for disconnect() calls */ goto re_enumerate; } - + + /* Restore the device's previous configuration */ if (!udev->actconfig) goto done; - ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), USB_REQ_SET_CONFIGURATION, 0, udev->actconfig->desc.bConfigurationValue, 0, @@ -3409,16 +3409,25 @@ static int usb_reset_and_verify_device(struct usb_device *udev) } usb_set_device_state(udev, USB_STATE_CONFIGURED); + /* Put interfaces back into the same altsettings as before. + * Don't bother to send the Set-Interface request for interfaces + * that were already in altsetting 0; besides being unnecessary, + * many devices can't handle it. Instead just reset the host-side + * endpoint state. + */ for (i = 0; i < udev->actconfig->desc.bNumInterfaces; i++) { struct usb_interface *intf = udev->actconfig->interface[i]; struct usb_interface_descriptor *desc; - /* set_interface resets host side toggle even - * for altsetting zero. the interface may have no driver. - */ desc = &intf->cur_altsetting->desc; - ret = usb_set_interface(udev, desc->bInterfaceNumber, - desc->bAlternateSetting); + if (desc->bAlternateSetting == 0) { + usb_disable_interface(udev, intf, true); + usb_enable_interface(udev, intf, true); + ret = 0; + } else { + ret = usb_set_interface(udev, desc->bInterfaceNumber, + desc->bAlternateSetting); + } if (ret < 0) { dev_err(&udev->dev, "failed to restore interface %d " "altsetting %d (error=%d)\n", -- cgit v1.1 From d34d9721a559fd11ec682bd9ef17220de0162060 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Mon, 9 Mar 2009 13:44:48 -0400 Subject: USB: usbfs: remove unneeded "inline" annotations This patch (as1223) removes a bunch of unnecessary "inline" annotations from the usbfs driver. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/devio.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 8f022af..d3883f6 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -104,7 +104,7 @@ MODULE_PARM_DESC(usbfs_snoop, "true to log all usbfs traffic"); #define MAX_USBFS_BUFFER_SIZE 16384 -static inline int connected(struct dev_state *ps) +static int connected(struct dev_state *ps) { return (!list_empty(&ps->list) && ps->dev->state != USB_STATE_NOTATTACHED); @@ -248,7 +248,7 @@ static void free_async(struct async *as) kfree(as); } -static inline void async_newpending(struct async *as) +static void async_newpending(struct async *as) { struct dev_state *ps = as->ps; unsigned long flags; @@ -258,7 +258,7 @@ static inline void async_newpending(struct async *as) spin_unlock_irqrestore(&ps->lock, flags); } -static inline void async_removepending(struct async *as) +static void async_removepending(struct async *as) { struct dev_state *ps = as->ps; unsigned long flags; @@ -268,7 +268,7 @@ static inline void async_removepending(struct async *as) spin_unlock_irqrestore(&ps->lock, flags); } -static inline struct async *async_getcompleted(struct dev_state *ps) +static struct async *async_getcompleted(struct dev_state *ps) { unsigned long flags; struct async *as = NULL; @@ -283,7 +283,7 @@ static inline struct async *async_getcompleted(struct dev_state *ps) return as; } -static inline struct async *async_getpending(struct dev_state *ps, +static struct async *async_getpending(struct dev_state *ps, void __user *userurb) { unsigned long flags; @@ -376,7 +376,7 @@ static void destroy_async_on_interface(struct dev_state *ps, destroy_async(ps, &hitlist); } -static inline void destroy_all_async(struct dev_state *ps) +static void destroy_all_async(struct dev_state *ps) { destroy_async(ps, &ps->async_pending); } -- cgit v1.1 From 31dbb803464d75b96212cce9052dfeaeac0819de Mon Sep 17 00:00:00 2001 From: Johannes Weiner Date: Wed, 4 Mar 2009 12:06:15 -0800 Subject: USB: use kzfree() Use kzfree() instead of memset() + kfree(). Signed-off-by: Johannes Weiner Reviewed-by: Pekka Enberg Signed-off-by: Andrew Morton Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/hwa-hc.c | 3 +-- drivers/usb/wusbcore/cbaf.c | 3 +-- 2 files changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/hwa-hc.c b/drivers/usb/host/hwa-hc.c index 8582236..cbf30e5 100644 --- a/drivers/usb/host/hwa-hc.c +++ b/drivers/usb/host/hwa-hc.c @@ -464,8 +464,7 @@ static int __hwahc_dev_set_key(struct wusbhc *wusbhc, u8 port_idx, u32 tkid, port_idx << 8 | iface_no, keyd, keyd_len, 1000 /* FIXME: arbitrary */); - memset(keyd, 0, sizeof(*keyd)); /* clear keys etc. */ - kfree(keyd); + kzfree(keyd); /* clear keys etc. */ return result; } diff --git a/drivers/usb/wusbcore/cbaf.c b/drivers/usb/wusbcore/cbaf.c index 1335cbe..25eae40 100644 --- a/drivers/usb/wusbcore/cbaf.c +++ b/drivers/usb/wusbcore/cbaf.c @@ -638,8 +638,7 @@ static void cbaf_disconnect(struct usb_interface *iface) usb_put_intf(iface); kfree(cbaf->buffer); /* paranoia: clean up crypto keys */ - memset(cbaf, 0, sizeof(*cbaf)); - kfree(cbaf); + kzfree(cbaf); } static struct usb_device_id cbaf_id_table[] = { -- cgit v1.1 From ef8b6bcb39559d956f897acf7ebe600d5105d479 Mon Sep 17 00:00:00 2001 From: Craig Shelley Date: Thu, 26 Feb 2009 22:19:22 +0000 Subject: USB: CP2101 Support AN205 baud rates This patch adds support for the extended range of baud rates supported by CP2102 and CP2103 devices described in SiLabs AN205. An additional function cp2101_quantise_baudrate rounds the baud rate as per AN205 Table 1. A modification to the baud rate calculation removes a rounding error, allowing the full range of baud rates to be used. Signed-off-by: Craig Shelley Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/cp2101.c | 92 +++++++++++++++++++++++++-------------------- 1 file changed, 52 insertions(+), 40 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index 9b4082b..9b56e35 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -31,7 +31,7 @@ /* * Version Information */ -#define DRIVER_VERSION "v0.07" +#define DRIVER_VERSION "v0.08" #define DRIVER_DESC "Silicon Labs CP2101/CP2102 RS232 serial adaptor driver" /* @@ -301,6 +301,47 @@ static inline int cp2101_set_config_single(struct usb_serial_port *port, return cp2101_set_config(port, request, &data, 2); } +/* + * cp2101_quantise_baudrate + * Quantises the baud rate as per AN205 Table 1 + */ +static unsigned int cp2101_quantise_baudrate(unsigned int baud) { + if (baud <= 56) baud = 0; + else if (baud <= 300) baud = 300; + else if (baud <= 600) baud = 600; + else if (baud <= 1200) baud = 1200; + else if (baud <= 1800) baud = 1800; + else if (baud <= 2400) baud = 2400; + else if (baud <= 4000) baud = 4000; + else if (baud <= 4803) baud = 4800; + else if (baud <= 7207) baud = 7200; + else if (baud <= 9612) baud = 9600; + else if (baud <= 14428) baud = 14400; + else if (baud <= 16062) baud = 16000; + else if (baud <= 19250) baud = 19200; + else if (baud <= 28912) baud = 28800; + else if (baud <= 38601) baud = 38400; + else if (baud <= 51558) baud = 51200; + else if (baud <= 56280) baud = 56000; + else if (baud <= 58053) baud = 57600; + else if (baud <= 64111) baud = 64000; + else if (baud <= 77608) baud = 76800; + else if (baud <= 117028) baud = 115200; + else if (baud <= 129347) baud = 128000; + else if (baud <= 156868) baud = 153600; + else if (baud <= 237832) baud = 230400; + else if (baud <= 254234) baud = 250000; + else if (baud <= 273066) baud = 256000; + else if (baud <= 491520) baud = 460800; + else if (baud <= 567138) baud = 500000; + else if (baud <= 670254) baud = 576000; + else if (baud <= 1053257) baud = 921600; + else if (baud <= 1474560) baud = 1228800; + else if (baud <= 2457600) baud = 1843200; + else baud = 3686400; + return baud; +} + static int cp2101_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp) { @@ -388,7 +429,7 @@ static void cp2101_get_termios (struct tty_struct *tty) cp2101_get_config(port, CP2101_BAUDRATE, &baud, 2); /* Convert to baudrate */ if (baud) - baud = BAUD_RATE_GEN_FREQ / baud; + baud = cp2101_quantise_baudrate((BAUD_RATE_GEN_FREQ + baud/2)/ baud); dbg("%s - baud rate = %d", __func__, baud); @@ -517,46 +558,17 @@ static void cp2101_set_termios(struct tty_struct *tty, tty->termios->c_cflag &= ~CMSPAR; cflag = tty->termios->c_cflag; old_cflag = old_termios->c_cflag; - baud = tty_get_baud_rate(tty); + baud = cp2101_quantise_baudrate(tty_get_baud_rate(tty)); /* If the baud rate is to be updated*/ - if (baud != tty_termios_baud_rate(old_termios)) { - switch (baud) { - case 0: - case 600: - case 1200: - case 1800: - case 2400: - case 4800: - case 7200: - case 9600: - case 14400: - case 19200: - case 28800: - case 38400: - case 55854: - case 57600: - case 115200: - case 127117: - case 230400: - case 460800: - case 921600: - case 3686400: - break; - default: - baud = 9600; - break; - } - - if (baud) { - dbg("%s - Setting baud rate to %d baud", __func__, - baud); - if (cp2101_set_config_single(port, CP2101_BAUDRATE, - (BAUD_RATE_GEN_FREQ / baud))) { - dev_err(&port->dev, "Baud rate requested not " - "supported by device\n"); - baud = tty_termios_baud_rate(old_termios); - } + if (baud != tty_termios_baud_rate(old_termios) && baud != 0) { + dbg("%s - Setting baud rate to %d baud", __func__, + baud); + if (cp2101_set_config_single(port, CP2101_BAUDRATE, + ((BAUD_RATE_GEN_FREQ + baud/2) / baud))) { + dev_err(&port->dev, "Baud rate requested not " + "supported by device\n"); + baud = tty_termios_baud_rate(old_termios); } } /* Report back the resulting baud rate */ -- cgit v1.1 From 97324955c62aaa104edea2ef4370dc8882a5ab82 Mon Sep 17 00:00:00 2001 From: Craig Shelley Date: Thu, 26 Feb 2009 22:21:51 +0000 Subject: USB: CP2101 Reduce Error Logging This patch lowers the logging priority of certain messages to prevent users from flooding the log files. Signed-off-by: Craig Shelley Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/cp2101.c | 19 +++++++------------ 1 file changed, 7 insertions(+), 12 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index 9b56e35..2f23d06 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -11,10 +11,6 @@ * thanks to Karl Hiramoto karl@hiramoto.org. RTSCTS hardware flow * control thanks to Munir Nassar nassarmu@real-time.com * - * Outstanding Issues: - * Buffers are not flushed when the port is opened. - * Multiple calls to write() may fail with "Resource temporarily unavailable" - * */ #include @@ -225,7 +221,7 @@ static int cp2101_get_config(struct usb_serial_port *port, u8 request, kfree(buf); if (result != size) { - dev_err(&port->dev, "%s - Unable to send config request, " + dbg("%s - Unable to send config request, " "request=0x%x size=%d result=%d\n", __func__, request, size, result); return -EPROTO; @@ -276,7 +272,7 @@ static int cp2101_set_config(struct usb_serial_port *port, u8 request, kfree(buf); if ((size > 2 && result != size) || result < 0) { - dev_err(&port->dev, "%s - Unable to send request, " + dbg("%s - Unable to send request, " "request=0x%x size=%d result=%d\n", __func__, request, size, result); return -EPROTO; @@ -566,8 +562,7 @@ static void cp2101_set_termios(struct tty_struct *tty, baud); if (cp2101_set_config_single(port, CP2101_BAUDRATE, ((BAUD_RATE_GEN_FREQ + baud/2) / baud))) { - dev_err(&port->dev, "Baud rate requested not " - "supported by device\n"); + dbg("Baud rate requested not supported by device\n"); baud = tty_termios_baud_rate(old_termios); } } @@ -600,14 +595,14 @@ static void cp2101_set_termios(struct tty_struct *tty, dbg("%s - data bits = 9", __func__); break;*/ default: - dev_err(&port->dev, "cp2101 driver does not " + dbg("cp2101 driver does not " "support the number of bits requested," " using 8 bit mode\n"); bits |= BITS_DATA_8; break; } if (cp2101_set_config(port, CP2101_BITS, &bits, 2)) - dev_err(&port->dev, "Number of data bits requested " + dbg("Number of data bits requested " "not supported by device\n"); } @@ -624,7 +619,7 @@ static void cp2101_set_termios(struct tty_struct *tty, } } if (cp2101_set_config(port, CP2101_BITS, &bits, 2)) - dev_err(&port->dev, "Parity mode not supported " + dbg("Parity mode not supported " "by device\n"); } @@ -639,7 +634,7 @@ static void cp2101_set_termios(struct tty_struct *tty, dbg("%s - stop bits = 1", __func__); } if (cp2101_set_config(port, CP2101_BITS, &bits, 2)) - dev_err(&port->dev, "Number of stop bits requested " + dbg("Number of stop bits requested " "not supported by device\n"); } -- cgit v1.1 From 03ee251546a9360cbb4c27c250d128dcbcfd9931 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Wed, 11 Mar 2009 11:03:49 -0700 Subject: USB: serial: rename cp2101 driver to cp210x Lots of users are getting confused about the cp2101 driver. It really does support more than just the cp2101 device, so rename it to cp210x to try to prevent confusion. Cc: Craig Shelley Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/Kconfig | 10 +- drivers/usb/serial/Makefile | 2 +- drivers/usb/serial/cp2101.c | 788 -------------------------------------------- drivers/usb/serial/cp210x.c | 788 ++++++++++++++++++++++++++++++++++++++++++++ 4 files changed, 794 insertions(+), 794 deletions(-) delete mode 100644 drivers/usb/serial/cp2101.c create mode 100644 drivers/usb/serial/cp210x.c (limited to 'drivers/usb') diff --git a/drivers/usb/serial/Kconfig b/drivers/usb/serial/Kconfig index 4afe73e..a65f919 100644 --- a/drivers/usb/serial/Kconfig +++ b/drivers/usb/serial/Kconfig @@ -116,14 +116,14 @@ config USB_SERIAL_DIGI_ACCELEPORT To compile this driver as a module, choose M here: the module will be called digi_acceleport. -config USB_SERIAL_CP2101 - tristate "USB CP2101 UART Bridge Controller" +config USB_SERIAL_CP210X + tristate "USB CP210x family of UART Bridge Controllers" help - Say Y here if you want to use a CP2101/CP2102 based USB to RS232 - converter. + Say Y here if you want to use a CP2101/CP2102/CP2103 based USB + to RS232 converters. To compile this driver as a module, choose M here: the - module will be called cp2101. + module will be called cp210x. config USB_SERIAL_CYPRESS_M8 tristate "USB Cypress M8 USB Serial Driver" diff --git a/drivers/usb/serial/Makefile b/drivers/usb/serial/Makefile index 94043ba..66619be 100644 --- a/drivers/usb/serial/Makefile +++ b/drivers/usb/serial/Makefile @@ -15,7 +15,7 @@ obj-$(CONFIG_USB_SERIAL_AIRCABLE) += aircable.o obj-$(CONFIG_USB_SERIAL_ARK3116) += ark3116.o obj-$(CONFIG_USB_SERIAL_BELKIN) += belkin_sa.o obj-$(CONFIG_USB_SERIAL_CH341) += ch341.o -obj-$(CONFIG_USB_SERIAL_CP2101) += cp2101.o +obj-$(CONFIG_USB_SERIAL_CP210X) += cp210x.o obj-$(CONFIG_USB_SERIAL_CYBERJACK) += cyberjack.o obj-$(CONFIG_USB_SERIAL_CYPRESS_M8) += cypress_m8.o obj-$(CONFIG_USB_SERIAL_DEBUG) += usb_debug.o diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c deleted file mode 100644 index 2f23d06..0000000 --- a/drivers/usb/serial/cp2101.c +++ /dev/null @@ -1,788 +0,0 @@ -/* - * Silicon Laboratories CP2101/CP2102 USB to RS232 serial adaptor driver - * - * Copyright (C) 2005 Craig Shelley (craig@microtron.org.uk) - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License version - * 2 as published by the Free Software Foundation. - * - * Support to set flow control line levels using TIOCMGET and TIOCMSET - * thanks to Karl Hiramoto karl@hiramoto.org. RTSCTS hardware flow - * control thanks to Munir Nassar nassarmu@real-time.com - * - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -/* - * Version Information - */ -#define DRIVER_VERSION "v0.08" -#define DRIVER_DESC "Silicon Labs CP2101/CP2102 RS232 serial adaptor driver" - -/* - * Function Prototypes - */ -static int cp2101_open(struct tty_struct *, struct usb_serial_port *, - struct file *); -static void cp2101_cleanup(struct usb_serial_port *); -static void cp2101_close(struct tty_struct *, struct usb_serial_port *, - struct file*); -static void cp2101_get_termios(struct tty_struct *); -static void cp2101_set_termios(struct tty_struct *, struct usb_serial_port *, - struct ktermios*); -static int cp2101_tiocmget(struct tty_struct *, struct file *); -static int cp2101_tiocmset(struct tty_struct *, struct file *, - unsigned int, unsigned int); -static void cp2101_break_ctl(struct tty_struct *, int); -static int cp2101_startup(struct usb_serial *); -static void cp2101_shutdown(struct usb_serial *); - - -static int debug; - -static struct usb_device_id id_table [] = { - { USB_DEVICE(0x0471, 0x066A) }, /* AKTAKOM ACE-1001 cable */ - { USB_DEVICE(0x0489, 0xE000) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */ - { USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */ - { USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */ - { USB_DEVICE(0x0FCF, 0x1004) }, /* Dynastream ANT2USB */ - { USB_DEVICE(0x0FCF, 0x1006) }, /* Dynastream ANT development board */ - { USB_DEVICE(0x10A6, 0xAA26) }, /* Knock-off DCU-11 cable */ - { USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */ - { USB_DEVICE(0x10B5, 0xAC70) }, /* Nokia CA-42 USB */ - { USB_DEVICE(0x10C4, 0x800A) }, /* SPORTident BSM7-D-USB main station */ - { USB_DEVICE(0x10C4, 0x803B) }, /* Pololu USB-serial converter */ - { USB_DEVICE(0x10C4, 0x8053) }, /* Enfora EDG1228 */ - { USB_DEVICE(0x10C4, 0x8054) }, /* Enfora GSM2228 */ - { USB_DEVICE(0x10C4, 0x8066) }, /* Argussoft In-System Programmer */ - { USB_DEVICE(0x10C4, 0x807A) }, /* Crumb128 board */ - { USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */ - { USB_DEVICE(0x10C4, 0x80DD) }, /* Tracient RFID */ - { USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */ - { USB_DEVICE(0x10C4, 0x8115) }, /* Arygon NFC/Mifare Reader */ - { USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */ - { USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */ - { USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */ - { USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */ - { USB_DEVICE(0x10C4, 0x819F) }, /* MJS USB Toslink Switcher */ - { USB_DEVICE(0x10C4, 0x81A6) }, /* ThinkOptics WavIt */ - { USB_DEVICE(0x10C4, 0x81AC) }, /* MSD Dash Hawk */ - { USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */ - { USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */ - { USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */ - { USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */ - { USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */ - { USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demostration module */ - { USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */ - { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */ - { USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */ - { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */ - { USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */ - { USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */ - { USB_DEVICE(0x10C4, 0xF002) }, /* Elan Digital Systems USBwave12 */ - { USB_DEVICE(0x10C4, 0xF003) }, /* Elan Digital Systems USBpulse100 */ - { USB_DEVICE(0x10C4, 0xF004) }, /* Elan Digital Systems USBcount50 */ - { USB_DEVICE(0x10C5, 0xEA61) }, /* Silicon Labs MobiData GPRS USB Modem */ - { USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */ - { USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */ - { USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */ - { USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */ - { } /* Terminating Entry */ -}; - -MODULE_DEVICE_TABLE(usb, id_table); - -static struct usb_driver cp2101_driver = { - .name = "cp2101", - .probe = usb_serial_probe, - .disconnect = usb_serial_disconnect, - .id_table = id_table, - .no_dynamic_id = 1, -}; - -static struct usb_serial_driver cp2101_device = { - .driver = { - .owner = THIS_MODULE, - .name = "cp2101", - }, - .usb_driver = &cp2101_driver, - .id_table = id_table, - .num_ports = 1, - .open = cp2101_open, - .close = cp2101_close, - .break_ctl = cp2101_break_ctl, - .set_termios = cp2101_set_termios, - .tiocmget = cp2101_tiocmget, - .tiocmset = cp2101_tiocmset, - .attach = cp2101_startup, - .shutdown = cp2101_shutdown, -}; - -/* Config request types */ -#define REQTYPE_HOST_TO_DEVICE 0x41 -#define REQTYPE_DEVICE_TO_HOST 0xc1 - -/* Config SET requests. To GET, add 1 to the request number */ -#define CP2101_UART 0x00 /* Enable / Disable */ -#define CP2101_BAUDRATE 0x01 /* (BAUD_RATE_GEN_FREQ / baudrate) */ -#define CP2101_BITS 0x03 /* 0x(0)(databits)(parity)(stopbits) */ -#define CP2101_BREAK 0x05 /* On / Off */ -#define CP2101_CONTROL 0x07 /* Flow control line states */ -#define CP2101_MODEMCTL 0x13 /* Modem controls */ -#define CP2101_CONFIG_6 0x19 /* 6 bytes of config data ??? */ - -/* CP2101_UART */ -#define UART_ENABLE 0x0001 -#define UART_DISABLE 0x0000 - -/* CP2101_BAUDRATE */ -#define BAUD_RATE_GEN_FREQ 0x384000 - -/* CP2101_BITS */ -#define BITS_DATA_MASK 0X0f00 -#define BITS_DATA_5 0X0500 -#define BITS_DATA_6 0X0600 -#define BITS_DATA_7 0X0700 -#define BITS_DATA_8 0X0800 -#define BITS_DATA_9 0X0900 - -#define BITS_PARITY_MASK 0x00f0 -#define BITS_PARITY_NONE 0x0000 -#define BITS_PARITY_ODD 0x0010 -#define BITS_PARITY_EVEN 0x0020 -#define BITS_PARITY_MARK 0x0030 -#define BITS_PARITY_SPACE 0x0040 - -#define BITS_STOP_MASK 0x000f -#define BITS_STOP_1 0x0000 -#define BITS_STOP_1_5 0x0001 -#define BITS_STOP_2 0x0002 - -/* CP2101_BREAK */ -#define BREAK_ON 0x0000 -#define BREAK_OFF 0x0001 - -/* CP2101_CONTROL */ -#define CONTROL_DTR 0x0001 -#define CONTROL_RTS 0x0002 -#define CONTROL_CTS 0x0010 -#define CONTROL_DSR 0x0020 -#define CONTROL_RING 0x0040 -#define CONTROL_DCD 0x0080 -#define CONTROL_WRITE_DTR 0x0100 -#define CONTROL_WRITE_RTS 0x0200 - -/* - * cp2101_get_config - * Reads from the CP2101 configuration registers - * 'size' is specified in bytes. - * 'data' is a pointer to a pre-allocated array of integers large - * enough to hold 'size' bytes (with 4 bytes to each integer) - */ -static int cp2101_get_config(struct usb_serial_port *port, u8 request, - unsigned int *data, int size) -{ - struct usb_serial *serial = port->serial; - __le32 *buf; - int result, i, length; - - /* Number of integers required to contain the array */ - length = (((size - 1) | 3) + 1)/4; - - buf = kcalloc(length, sizeof(__le32), GFP_KERNEL); - if (!buf) { - dev_err(&port->dev, "%s - out of memory.\n", __func__); - return -ENOMEM; - } - - /* For get requests, the request number must be incremented */ - request++; - - /* Issue the request, attempting to read 'size' bytes */ - result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), - request, REQTYPE_DEVICE_TO_HOST, 0x0000, - 0, buf, size, 300); - - /* Convert data into an array of integers */ - for (i = 0; i < length; i++) - data[i] = le32_to_cpu(buf[i]); - - kfree(buf); - - if (result != size) { - dbg("%s - Unable to send config request, " - "request=0x%x size=%d result=%d\n", - __func__, request, size, result); - return -EPROTO; - } - - return 0; -} - -/* - * cp2101_set_config - * Writes to the CP2101 configuration registers - * Values less than 16 bits wide are sent directly - * 'size' is specified in bytes. - */ -static int cp2101_set_config(struct usb_serial_port *port, u8 request, - unsigned int *data, int size) -{ - struct usb_serial *serial = port->serial; - __le32 *buf; - int result, i, length; - - /* Number of integers required to contain the array */ - length = (((size - 1) | 3) + 1)/4; - - buf = kmalloc(length * sizeof(__le32), GFP_KERNEL); - if (!buf) { - dev_err(&port->dev, "%s - out of memory.\n", - __func__); - return -ENOMEM; - } - - /* Array of integers into bytes */ - for (i = 0; i < length; i++) - buf[i] = cpu_to_le32(data[i]); - - if (size > 2) { - result = usb_control_msg(serial->dev, - usb_sndctrlpipe(serial->dev, 0), - request, REQTYPE_HOST_TO_DEVICE, 0x0000, - 0, buf, size, 300); - } else { - result = usb_control_msg(serial->dev, - usb_sndctrlpipe(serial->dev, 0), - request, REQTYPE_HOST_TO_DEVICE, data[0], - 0, NULL, 0, 300); - } - - kfree(buf); - - if ((size > 2 && result != size) || result < 0) { - dbg("%s - Unable to send request, " - "request=0x%x size=%d result=%d\n", - __func__, request, size, result); - return -EPROTO; - } - - /* Single data value */ - result = usb_control_msg(serial->dev, - usb_sndctrlpipe(serial->dev, 0), - request, REQTYPE_HOST_TO_DEVICE, data[0], - 0, NULL, 0, 300); - return 0; -} - -/* - * cp2101_set_config_single - * Convenience function for calling cp2101_set_config on single data values - * without requiring an integer pointer - */ -static inline int cp2101_set_config_single(struct usb_serial_port *port, - u8 request, unsigned int data) -{ - return cp2101_set_config(port, request, &data, 2); -} - -/* - * cp2101_quantise_baudrate - * Quantises the baud rate as per AN205 Table 1 - */ -static unsigned int cp2101_quantise_baudrate(unsigned int baud) { - if (baud <= 56) baud = 0; - else if (baud <= 300) baud = 300; - else if (baud <= 600) baud = 600; - else if (baud <= 1200) baud = 1200; - else if (baud <= 1800) baud = 1800; - else if (baud <= 2400) baud = 2400; - else if (baud <= 4000) baud = 4000; - else if (baud <= 4803) baud = 4800; - else if (baud <= 7207) baud = 7200; - else if (baud <= 9612) baud = 9600; - else if (baud <= 14428) baud = 14400; - else if (baud <= 16062) baud = 16000; - else if (baud <= 19250) baud = 19200; - else if (baud <= 28912) baud = 28800; - else if (baud <= 38601) baud = 38400; - else if (baud <= 51558) baud = 51200; - else if (baud <= 56280) baud = 56000; - else if (baud <= 58053) baud = 57600; - else if (baud <= 64111) baud = 64000; - else if (baud <= 77608) baud = 76800; - else if (baud <= 117028) baud = 115200; - else if (baud <= 129347) baud = 128000; - else if (baud <= 156868) baud = 153600; - else if (baud <= 237832) baud = 230400; - else if (baud <= 254234) baud = 250000; - else if (baud <= 273066) baud = 256000; - else if (baud <= 491520) baud = 460800; - else if (baud <= 567138) baud = 500000; - else if (baud <= 670254) baud = 576000; - else if (baud <= 1053257) baud = 921600; - else if (baud <= 1474560) baud = 1228800; - else if (baud <= 2457600) baud = 1843200; - else baud = 3686400; - return baud; -} - -static int cp2101_open(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp) -{ - struct usb_serial *serial = port->serial; - int result; - - dbg("%s - port %d", __func__, port->number); - - if (cp2101_set_config_single(port, CP2101_UART, UART_ENABLE)) { - dev_err(&port->dev, "%s - Unable to enable UART\n", - __func__); - return -EPROTO; - } - - /* Start reading from the device */ - usb_fill_bulk_urb(port->read_urb, serial->dev, - usb_rcvbulkpipe(serial->dev, - port->bulk_in_endpointAddress), - port->read_urb->transfer_buffer, - port->read_urb->transfer_buffer_length, - serial->type->read_bulk_callback, - port); - result = usb_submit_urb(port->read_urb, GFP_KERNEL); - if (result) { - dev_err(&port->dev, "%s - failed resubmitting read urb, " - "error %d\n", __func__, result); - return result; - } - - /* Configure the termios structure */ - cp2101_get_termios(tty); - - /* Set the DTR and RTS pins low */ - cp2101_tiocmset(tty, NULL, TIOCM_DTR | TIOCM_RTS, 0); - - return 0; -} - -static void cp2101_cleanup(struct usb_serial_port *port) -{ - struct usb_serial *serial = port->serial; - - dbg("%s - port %d", __func__, port->number); - - if (serial->dev) { - /* shutdown any bulk reads that might be going on */ - if (serial->num_bulk_out) - usb_kill_urb(port->write_urb); - if (serial->num_bulk_in) - usb_kill_urb(port->read_urb); - } -} - -static void cp2101_close(struct tty_struct *tty, struct usb_serial_port *port, - struct file *filp) -{ - dbg("%s - port %d", __func__, port->number); - - /* shutdown our urbs */ - dbg("%s - shutting down urbs", __func__); - usb_kill_urb(port->write_urb); - usb_kill_urb(port->read_urb); - - mutex_lock(&port->serial->disc_mutex); - if (!port->serial->disconnected) - cp2101_set_config_single(port, CP2101_UART, UART_DISABLE); - mutex_unlock(&port->serial->disc_mutex); -} - -/* - * cp2101_get_termios - * Reads the baud rate, data bits, parity, stop bits and flow control mode - * from the device, corrects any unsupported values, and configures the - * termios structure to reflect the state of the device - */ -static void cp2101_get_termios (struct tty_struct *tty) -{ - struct usb_serial_port *port = tty->driver_data; - unsigned int cflag, modem_ctl[4]; - unsigned int baud; - unsigned int bits; - - dbg("%s - port %d", __func__, port->number); - - cp2101_get_config(port, CP2101_BAUDRATE, &baud, 2); - /* Convert to baudrate */ - if (baud) - baud = cp2101_quantise_baudrate((BAUD_RATE_GEN_FREQ + baud/2)/ baud); - - dbg("%s - baud rate = %d", __func__, baud); - - tty_encode_baud_rate(tty, baud, baud); - cflag = tty->termios->c_cflag; - - cp2101_get_config(port, CP2101_BITS, &bits, 2); - cflag &= ~CSIZE; - switch (bits & BITS_DATA_MASK) { - case BITS_DATA_5: - dbg("%s - data bits = 5", __func__); - cflag |= CS5; - break; - case BITS_DATA_6: - dbg("%s - data bits = 6", __func__); - cflag |= CS6; - break; - case BITS_DATA_7: - dbg("%s - data bits = 7", __func__); - cflag |= CS7; - break; - case BITS_DATA_8: - dbg("%s - data bits = 8", __func__); - cflag |= CS8; - break; - case BITS_DATA_9: - dbg("%s - data bits = 9 (not supported, using 8 data bits)", - __func__); - cflag |= CS8; - bits &= ~BITS_DATA_MASK; - bits |= BITS_DATA_8; - cp2101_set_config(port, CP2101_BITS, &bits, 2); - break; - default: - dbg("%s - Unknown number of data bits, using 8", __func__); - cflag |= CS8; - bits &= ~BITS_DATA_MASK; - bits |= BITS_DATA_8; - cp2101_set_config(port, CP2101_BITS, &bits, 2); - break; - } - - switch (bits & BITS_PARITY_MASK) { - case BITS_PARITY_NONE: - dbg("%s - parity = NONE", __func__); - cflag &= ~PARENB; - break; - case BITS_PARITY_ODD: - dbg("%s - parity = ODD", __func__); - cflag |= (PARENB|PARODD); - break; - case BITS_PARITY_EVEN: - dbg("%s - parity = EVEN", __func__); - cflag &= ~PARODD; - cflag |= PARENB; - break; - case BITS_PARITY_MARK: - dbg("%s - parity = MARK (not supported, disabling parity)", - __func__); - cflag &= ~PARENB; - bits &= ~BITS_PARITY_MASK; - cp2101_set_config(port, CP2101_BITS, &bits, 2); - break; - case BITS_PARITY_SPACE: - dbg("%s - parity = SPACE (not supported, disabling parity)", - __func__); - cflag &= ~PARENB; - bits &= ~BITS_PARITY_MASK; - cp2101_set_config(port, CP2101_BITS, &bits, 2); - break; - default: - dbg("%s - Unknown parity mode, disabling parity", __func__); - cflag &= ~PARENB; - bits &= ~BITS_PARITY_MASK; - cp2101_set_config(port, CP2101_BITS, &bits, 2); - break; - } - - cflag &= ~CSTOPB; - switch (bits & BITS_STOP_MASK) { - case BITS_STOP_1: - dbg("%s - stop bits = 1", __func__); - break; - case BITS_STOP_1_5: - dbg("%s - stop bits = 1.5 (not supported, using 1 stop bit)", - __func__); - bits &= ~BITS_STOP_MASK; - cp2101_set_config(port, CP2101_BITS, &bits, 2); - break; - case BITS_STOP_2: - dbg("%s - stop bits = 2", __func__); - cflag |= CSTOPB; - break; - default: - dbg("%s - Unknown number of stop bits, using 1 stop bit", - __func__); - bits &= ~BITS_STOP_MASK; - cp2101_set_config(port, CP2101_BITS, &bits, 2); - break; - } - - cp2101_get_config(port, CP2101_MODEMCTL, modem_ctl, 16); - if (modem_ctl[0] & 0x0008) { - dbg("%s - flow control = CRTSCTS", __func__); - cflag |= CRTSCTS; - } else { - dbg("%s - flow control = NONE", __func__); - cflag &= ~CRTSCTS; - } - - tty->termios->c_cflag = cflag; -} - -static void cp2101_set_termios(struct tty_struct *tty, - struct usb_serial_port *port, struct ktermios *old_termios) -{ - unsigned int cflag, old_cflag; - unsigned int baud = 0, bits; - unsigned int modem_ctl[4]; - - dbg("%s - port %d", __func__, port->number); - - if (!tty) - return; - - tty->termios->c_cflag &= ~CMSPAR; - cflag = tty->termios->c_cflag; - old_cflag = old_termios->c_cflag; - baud = cp2101_quantise_baudrate(tty_get_baud_rate(tty)); - - /* If the baud rate is to be updated*/ - if (baud != tty_termios_baud_rate(old_termios) && baud != 0) { - dbg("%s - Setting baud rate to %d baud", __func__, - baud); - if (cp2101_set_config_single(port, CP2101_BAUDRATE, - ((BAUD_RATE_GEN_FREQ + baud/2) / baud))) { - dbg("Baud rate requested not supported by device\n"); - baud = tty_termios_baud_rate(old_termios); - } - } - /* Report back the resulting baud rate */ - tty_encode_baud_rate(tty, baud, baud); - - /* If the number of data bits is to be updated */ - if ((cflag & CSIZE) != (old_cflag & CSIZE)) { - cp2101_get_config(port, CP2101_BITS, &bits, 2); - bits &= ~BITS_DATA_MASK; - switch (cflag & CSIZE) { - case CS5: - bits |= BITS_DATA_5; - dbg("%s - data bits = 5", __func__); - break; - case CS6: - bits |= BITS_DATA_6; - dbg("%s - data bits = 6", __func__); - break; - case CS7: - bits |= BITS_DATA_7; - dbg("%s - data bits = 7", __func__); - break; - case CS8: - bits |= BITS_DATA_8; - dbg("%s - data bits = 8", __func__); - break; - /*case CS9: - bits |= BITS_DATA_9; - dbg("%s - data bits = 9", __func__); - break;*/ - default: - dbg("cp2101 driver does not " - "support the number of bits requested," - " using 8 bit mode\n"); - bits |= BITS_DATA_8; - break; - } - if (cp2101_set_config(port, CP2101_BITS, &bits, 2)) - dbg("Number of data bits requested " - "not supported by device\n"); - } - - if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD))) { - cp2101_get_config(port, CP2101_BITS, &bits, 2); - bits &= ~BITS_PARITY_MASK; - if (cflag & PARENB) { - if (cflag & PARODD) { - bits |= BITS_PARITY_ODD; - dbg("%s - parity = ODD", __func__); - } else { - bits |= BITS_PARITY_EVEN; - dbg("%s - parity = EVEN", __func__); - } - } - if (cp2101_set_config(port, CP2101_BITS, &bits, 2)) - dbg("Parity mode not supported " - "by device\n"); - } - - if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) { - cp2101_get_config(port, CP2101_BITS, &bits, 2); - bits &= ~BITS_STOP_MASK; - if (cflag & CSTOPB) { - bits |= BITS_STOP_2; - dbg("%s - stop bits = 2", __func__); - } else { - bits |= BITS_STOP_1; - dbg("%s - stop bits = 1", __func__); - } - if (cp2101_set_config(port, CP2101_BITS, &bits, 2)) - dbg("Number of stop bits requested " - "not supported by device\n"); - } - - if ((cflag & CRTSCTS) != (old_cflag & CRTSCTS)) { - cp2101_get_config(port, CP2101_MODEMCTL, modem_ctl, 16); - dbg("%s - read modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x", - __func__, modem_ctl[0], modem_ctl[1], - modem_ctl[2], modem_ctl[3]); - - if (cflag & CRTSCTS) { - modem_ctl[0] &= ~0x7B; - modem_ctl[0] |= 0x09; - modem_ctl[1] = 0x80; - dbg("%s - flow control = CRTSCTS", __func__); - } else { - modem_ctl[0] &= ~0x7B; - modem_ctl[0] |= 0x01; - modem_ctl[1] |= 0x40; - dbg("%s - flow control = NONE", __func__); - } - - dbg("%s - write modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x", - __func__, modem_ctl[0], modem_ctl[1], - modem_ctl[2], modem_ctl[3]); - cp2101_set_config(port, CP2101_MODEMCTL, modem_ctl, 16); - } - -} - -static int cp2101_tiocmset (struct tty_struct *tty, struct file *file, - unsigned int set, unsigned int clear) -{ - struct usb_serial_port *port = tty->driver_data; - unsigned int control = 0; - - dbg("%s - port %d", __func__, port->number); - - if (set & TIOCM_RTS) { - control |= CONTROL_RTS; - control |= CONTROL_WRITE_RTS; - } - if (set & TIOCM_DTR) { - control |= CONTROL_DTR; - control |= CONTROL_WRITE_DTR; - } - if (clear & TIOCM_RTS) { - control &= ~CONTROL_RTS; - control |= CONTROL_WRITE_RTS; - } - if (clear & TIOCM_DTR) { - control &= ~CONTROL_DTR; - control |= CONTROL_WRITE_DTR; - } - - dbg("%s - control = 0x%.4x", __func__, control); - - return cp2101_set_config(port, CP2101_CONTROL, &control, 2); - -} - -static int cp2101_tiocmget (struct tty_struct *tty, struct file *file) -{ - struct usb_serial_port *port = tty->driver_data; - unsigned int control; - int result; - - dbg("%s - port %d", __func__, port->number); - - cp2101_get_config(port, CP2101_CONTROL, &control, 1); - - result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0) - |((control & CONTROL_RTS) ? TIOCM_RTS : 0) - |((control & CONTROL_CTS) ? TIOCM_CTS : 0) - |((control & CONTROL_DSR) ? TIOCM_DSR : 0) - |((control & CONTROL_RING)? TIOCM_RI : 0) - |((control & CONTROL_DCD) ? TIOCM_CD : 0); - - dbg("%s - control = 0x%.2x", __func__, control); - - return result; -} - -static void cp2101_break_ctl (struct tty_struct *tty, int break_state) -{ - struct usb_serial_port *port = tty->driver_data; - unsigned int state; - - dbg("%s - port %d", __func__, port->number); - if (break_state == 0) - state = BREAK_OFF; - else - state = BREAK_ON; - dbg("%s - turning break %s", __func__, - state == BREAK_OFF ? "off" : "on"); - cp2101_set_config(port, CP2101_BREAK, &state, 2); -} - -static int cp2101_startup(struct usb_serial *serial) -{ - /* CP2101 buffers behave strangely unless device is reset */ - usb_reset_device(serial->dev); - return 0; -} - -static void cp2101_shutdown(struct usb_serial *serial) -{ - int i; - - dbg("%s", __func__); - - /* Stop reads and writes on all ports */ - for (i = 0; i < serial->num_ports; ++i) - cp2101_cleanup(serial->port[i]); -} - -static int __init cp2101_init(void) -{ - int retval; - - retval = usb_serial_register(&cp2101_device); - if (retval) - return retval; /* Failed to register */ - - retval = usb_register(&cp2101_driver); - if (retval) { - /* Failed to register */ - usb_serial_deregister(&cp2101_device); - return retval; - } - - /* Success */ - printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":" - DRIVER_DESC "\n"); - return 0; -} - -static void __exit cp2101_exit(void) -{ - usb_deregister(&cp2101_driver); - usb_serial_deregister(&cp2101_device); -} - -module_init(cp2101_init); -module_exit(cp2101_exit); - -MODULE_DESCRIPTION(DRIVER_DESC); -MODULE_VERSION(DRIVER_VERSION); -MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Enable verbose debugging messages"); diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c new file mode 100644 index 0000000..2f23d06 --- /dev/null +++ b/drivers/usb/serial/cp210x.c @@ -0,0 +1,788 @@ +/* + * Silicon Laboratories CP2101/CP2102 USB to RS232 serial adaptor driver + * + * Copyright (C) 2005 Craig Shelley (craig@microtron.org.uk) + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License version + * 2 as published by the Free Software Foundation. + * + * Support to set flow control line levels using TIOCMGET and TIOCMSET + * thanks to Karl Hiramoto karl@hiramoto.org. RTSCTS hardware flow + * control thanks to Munir Nassar nassarmu@real-time.com + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * Version Information + */ +#define DRIVER_VERSION "v0.08" +#define DRIVER_DESC "Silicon Labs CP2101/CP2102 RS232 serial adaptor driver" + +/* + * Function Prototypes + */ +static int cp2101_open(struct tty_struct *, struct usb_serial_port *, + struct file *); +static void cp2101_cleanup(struct usb_serial_port *); +static void cp2101_close(struct tty_struct *, struct usb_serial_port *, + struct file*); +static void cp2101_get_termios(struct tty_struct *); +static void cp2101_set_termios(struct tty_struct *, struct usb_serial_port *, + struct ktermios*); +static int cp2101_tiocmget(struct tty_struct *, struct file *); +static int cp2101_tiocmset(struct tty_struct *, struct file *, + unsigned int, unsigned int); +static void cp2101_break_ctl(struct tty_struct *, int); +static int cp2101_startup(struct usb_serial *); +static void cp2101_shutdown(struct usb_serial *); + + +static int debug; + +static struct usb_device_id id_table [] = { + { USB_DEVICE(0x0471, 0x066A) }, /* AKTAKOM ACE-1001 cable */ + { USB_DEVICE(0x0489, 0xE000) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */ + { USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */ + { USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */ + { USB_DEVICE(0x0FCF, 0x1004) }, /* Dynastream ANT2USB */ + { USB_DEVICE(0x0FCF, 0x1006) }, /* Dynastream ANT development board */ + { USB_DEVICE(0x10A6, 0xAA26) }, /* Knock-off DCU-11 cable */ + { USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */ + { USB_DEVICE(0x10B5, 0xAC70) }, /* Nokia CA-42 USB */ + { USB_DEVICE(0x10C4, 0x800A) }, /* SPORTident BSM7-D-USB main station */ + { USB_DEVICE(0x10C4, 0x803B) }, /* Pololu USB-serial converter */ + { USB_DEVICE(0x10C4, 0x8053) }, /* Enfora EDG1228 */ + { USB_DEVICE(0x10C4, 0x8054) }, /* Enfora GSM2228 */ + { USB_DEVICE(0x10C4, 0x8066) }, /* Argussoft In-System Programmer */ + { USB_DEVICE(0x10C4, 0x807A) }, /* Crumb128 board */ + { USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */ + { USB_DEVICE(0x10C4, 0x80DD) }, /* Tracient RFID */ + { USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */ + { USB_DEVICE(0x10C4, 0x8115) }, /* Arygon NFC/Mifare Reader */ + { USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */ + { USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */ + { USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */ + { USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */ + { USB_DEVICE(0x10C4, 0x819F) }, /* MJS USB Toslink Switcher */ + { USB_DEVICE(0x10C4, 0x81A6) }, /* ThinkOptics WavIt */ + { USB_DEVICE(0x10C4, 0x81AC) }, /* MSD Dash Hawk */ + { USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */ + { USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */ + { USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */ + { USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */ + { USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */ + { USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demostration module */ + { USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */ + { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */ + { USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */ + { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */ + { USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */ + { USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */ + { USB_DEVICE(0x10C4, 0xF002) }, /* Elan Digital Systems USBwave12 */ + { USB_DEVICE(0x10C4, 0xF003) }, /* Elan Digital Systems USBpulse100 */ + { USB_DEVICE(0x10C4, 0xF004) }, /* Elan Digital Systems USBcount50 */ + { USB_DEVICE(0x10C5, 0xEA61) }, /* Silicon Labs MobiData GPRS USB Modem */ + { USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */ + { USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */ + { USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */ + { USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */ + { } /* Terminating Entry */ +}; + +MODULE_DEVICE_TABLE(usb, id_table); + +static struct usb_driver cp2101_driver = { + .name = "cp2101", + .probe = usb_serial_probe, + .disconnect = usb_serial_disconnect, + .id_table = id_table, + .no_dynamic_id = 1, +}; + +static struct usb_serial_driver cp2101_device = { + .driver = { + .owner = THIS_MODULE, + .name = "cp2101", + }, + .usb_driver = &cp2101_driver, + .id_table = id_table, + .num_ports = 1, + .open = cp2101_open, + .close = cp2101_close, + .break_ctl = cp2101_break_ctl, + .set_termios = cp2101_set_termios, + .tiocmget = cp2101_tiocmget, + .tiocmset = cp2101_tiocmset, + .attach = cp2101_startup, + .shutdown = cp2101_shutdown, +}; + +/* Config request types */ +#define REQTYPE_HOST_TO_DEVICE 0x41 +#define REQTYPE_DEVICE_TO_HOST 0xc1 + +/* Config SET requests. To GET, add 1 to the request number */ +#define CP2101_UART 0x00 /* Enable / Disable */ +#define CP2101_BAUDRATE 0x01 /* (BAUD_RATE_GEN_FREQ / baudrate) */ +#define CP2101_BITS 0x03 /* 0x(0)(databits)(parity)(stopbits) */ +#define CP2101_BREAK 0x05 /* On / Off */ +#define CP2101_CONTROL 0x07 /* Flow control line states */ +#define CP2101_MODEMCTL 0x13 /* Modem controls */ +#define CP2101_CONFIG_6 0x19 /* 6 bytes of config data ??? */ + +/* CP2101_UART */ +#define UART_ENABLE 0x0001 +#define UART_DISABLE 0x0000 + +/* CP2101_BAUDRATE */ +#define BAUD_RATE_GEN_FREQ 0x384000 + +/* CP2101_BITS */ +#define BITS_DATA_MASK 0X0f00 +#define BITS_DATA_5 0X0500 +#define BITS_DATA_6 0X0600 +#define BITS_DATA_7 0X0700 +#define BITS_DATA_8 0X0800 +#define BITS_DATA_9 0X0900 + +#define BITS_PARITY_MASK 0x00f0 +#define BITS_PARITY_NONE 0x0000 +#define BITS_PARITY_ODD 0x0010 +#define BITS_PARITY_EVEN 0x0020 +#define BITS_PARITY_MARK 0x0030 +#define BITS_PARITY_SPACE 0x0040 + +#define BITS_STOP_MASK 0x000f +#define BITS_STOP_1 0x0000 +#define BITS_STOP_1_5 0x0001 +#define BITS_STOP_2 0x0002 + +/* CP2101_BREAK */ +#define BREAK_ON 0x0000 +#define BREAK_OFF 0x0001 + +/* CP2101_CONTROL */ +#define CONTROL_DTR 0x0001 +#define CONTROL_RTS 0x0002 +#define CONTROL_CTS 0x0010 +#define CONTROL_DSR 0x0020 +#define CONTROL_RING 0x0040 +#define CONTROL_DCD 0x0080 +#define CONTROL_WRITE_DTR 0x0100 +#define CONTROL_WRITE_RTS 0x0200 + +/* + * cp2101_get_config + * Reads from the CP2101 configuration registers + * 'size' is specified in bytes. + * 'data' is a pointer to a pre-allocated array of integers large + * enough to hold 'size' bytes (with 4 bytes to each integer) + */ +static int cp2101_get_config(struct usb_serial_port *port, u8 request, + unsigned int *data, int size) +{ + struct usb_serial *serial = port->serial; + __le32 *buf; + int result, i, length; + + /* Number of integers required to contain the array */ + length = (((size - 1) | 3) + 1)/4; + + buf = kcalloc(length, sizeof(__le32), GFP_KERNEL); + if (!buf) { + dev_err(&port->dev, "%s - out of memory.\n", __func__); + return -ENOMEM; + } + + /* For get requests, the request number must be incremented */ + request++; + + /* Issue the request, attempting to read 'size' bytes */ + result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0), + request, REQTYPE_DEVICE_TO_HOST, 0x0000, + 0, buf, size, 300); + + /* Convert data into an array of integers */ + for (i = 0; i < length; i++) + data[i] = le32_to_cpu(buf[i]); + + kfree(buf); + + if (result != size) { + dbg("%s - Unable to send config request, " + "request=0x%x size=%d result=%d\n", + __func__, request, size, result); + return -EPROTO; + } + + return 0; +} + +/* + * cp2101_set_config + * Writes to the CP2101 configuration registers + * Values less than 16 bits wide are sent directly + * 'size' is specified in bytes. + */ +static int cp2101_set_config(struct usb_serial_port *port, u8 request, + unsigned int *data, int size) +{ + struct usb_serial *serial = port->serial; + __le32 *buf; + int result, i, length; + + /* Number of integers required to contain the array */ + length = (((size - 1) | 3) + 1)/4; + + buf = kmalloc(length * sizeof(__le32), GFP_KERNEL); + if (!buf) { + dev_err(&port->dev, "%s - out of memory.\n", + __func__); + return -ENOMEM; + } + + /* Array of integers into bytes */ + for (i = 0; i < length; i++) + buf[i] = cpu_to_le32(data[i]); + + if (size > 2) { + result = usb_control_msg(serial->dev, + usb_sndctrlpipe(serial->dev, 0), + request, REQTYPE_HOST_TO_DEVICE, 0x0000, + 0, buf, size, 300); + } else { + result = usb_control_msg(serial->dev, + usb_sndctrlpipe(serial->dev, 0), + request, REQTYPE_HOST_TO_DEVICE, data[0], + 0, NULL, 0, 300); + } + + kfree(buf); + + if ((size > 2 && result != size) || result < 0) { + dbg("%s - Unable to send request, " + "request=0x%x size=%d result=%d\n", + __func__, request, size, result); + return -EPROTO; + } + + /* Single data value */ + result = usb_control_msg(serial->dev, + usb_sndctrlpipe(serial->dev, 0), + request, REQTYPE_HOST_TO_DEVICE, data[0], + 0, NULL, 0, 300); + return 0; +} + +/* + * cp2101_set_config_single + * Convenience function for calling cp2101_set_config on single data values + * without requiring an integer pointer + */ +static inline int cp2101_set_config_single(struct usb_serial_port *port, + u8 request, unsigned int data) +{ + return cp2101_set_config(port, request, &data, 2); +} + +/* + * cp2101_quantise_baudrate + * Quantises the baud rate as per AN205 Table 1 + */ +static unsigned int cp2101_quantise_baudrate(unsigned int baud) { + if (baud <= 56) baud = 0; + else if (baud <= 300) baud = 300; + else if (baud <= 600) baud = 600; + else if (baud <= 1200) baud = 1200; + else if (baud <= 1800) baud = 1800; + else if (baud <= 2400) baud = 2400; + else if (baud <= 4000) baud = 4000; + else if (baud <= 4803) baud = 4800; + else if (baud <= 7207) baud = 7200; + else if (baud <= 9612) baud = 9600; + else if (baud <= 14428) baud = 14400; + else if (baud <= 16062) baud = 16000; + else if (baud <= 19250) baud = 19200; + else if (baud <= 28912) baud = 28800; + else if (baud <= 38601) baud = 38400; + else if (baud <= 51558) baud = 51200; + else if (baud <= 56280) baud = 56000; + else if (baud <= 58053) baud = 57600; + else if (baud <= 64111) baud = 64000; + else if (baud <= 77608) baud = 76800; + else if (baud <= 117028) baud = 115200; + else if (baud <= 129347) baud = 128000; + else if (baud <= 156868) baud = 153600; + else if (baud <= 237832) baud = 230400; + else if (baud <= 254234) baud = 250000; + else if (baud <= 273066) baud = 256000; + else if (baud <= 491520) baud = 460800; + else if (baud <= 567138) baud = 500000; + else if (baud <= 670254) baud = 576000; + else if (baud <= 1053257) baud = 921600; + else if (baud <= 1474560) baud = 1228800; + else if (baud <= 2457600) baud = 1843200; + else baud = 3686400; + return baud; +} + +static int cp2101_open(struct tty_struct *tty, struct usb_serial_port *port, + struct file *filp) +{ + struct usb_serial *serial = port->serial; + int result; + + dbg("%s - port %d", __func__, port->number); + + if (cp2101_set_config_single(port, CP2101_UART, UART_ENABLE)) { + dev_err(&port->dev, "%s - Unable to enable UART\n", + __func__); + return -EPROTO; + } + + /* Start reading from the device */ + usb_fill_bulk_urb(port->read_urb, serial->dev, + usb_rcvbulkpipe(serial->dev, + port->bulk_in_endpointAddress), + port->read_urb->transfer_buffer, + port->read_urb->transfer_buffer_length, + serial->type->read_bulk_callback, + port); + result = usb_submit_urb(port->read_urb, GFP_KERNEL); + if (result) { + dev_err(&port->dev, "%s - failed resubmitting read urb, " + "error %d\n", __func__, result); + return result; + } + + /* Configure the termios structure */ + cp2101_get_termios(tty); + + /* Set the DTR and RTS pins low */ + cp2101_tiocmset(tty, NULL, TIOCM_DTR | TIOCM_RTS, 0); + + return 0; +} + +static void cp2101_cleanup(struct usb_serial_port *port) +{ + struct usb_serial *serial = port->serial; + + dbg("%s - port %d", __func__, port->number); + + if (serial->dev) { + /* shutdown any bulk reads that might be going on */ + if (serial->num_bulk_out) + usb_kill_urb(port->write_urb); + if (serial->num_bulk_in) + usb_kill_urb(port->read_urb); + } +} + +static void cp2101_close(struct tty_struct *tty, struct usb_serial_port *port, + struct file *filp) +{ + dbg("%s - port %d", __func__, port->number); + + /* shutdown our urbs */ + dbg("%s - shutting down urbs", __func__); + usb_kill_urb(port->write_urb); + usb_kill_urb(port->read_urb); + + mutex_lock(&port->serial->disc_mutex); + if (!port->serial->disconnected) + cp2101_set_config_single(port, CP2101_UART, UART_DISABLE); + mutex_unlock(&port->serial->disc_mutex); +} + +/* + * cp2101_get_termios + * Reads the baud rate, data bits, parity, stop bits and flow control mode + * from the device, corrects any unsupported values, and configures the + * termios structure to reflect the state of the device + */ +static void cp2101_get_termios (struct tty_struct *tty) +{ + struct usb_serial_port *port = tty->driver_data; + unsigned int cflag, modem_ctl[4]; + unsigned int baud; + unsigned int bits; + + dbg("%s - port %d", __func__, port->number); + + cp2101_get_config(port, CP2101_BAUDRATE, &baud, 2); + /* Convert to baudrate */ + if (baud) + baud = cp2101_quantise_baudrate((BAUD_RATE_GEN_FREQ + baud/2)/ baud); + + dbg("%s - baud rate = %d", __func__, baud); + + tty_encode_baud_rate(tty, baud, baud); + cflag = tty->termios->c_cflag; + + cp2101_get_config(port, CP2101_BITS, &bits, 2); + cflag &= ~CSIZE; + switch (bits & BITS_DATA_MASK) { + case BITS_DATA_5: + dbg("%s - data bits = 5", __func__); + cflag |= CS5; + break; + case BITS_DATA_6: + dbg("%s - data bits = 6", __func__); + cflag |= CS6; + break; + case BITS_DATA_7: + dbg("%s - data bits = 7", __func__); + cflag |= CS7; + break; + case BITS_DATA_8: + dbg("%s - data bits = 8", __func__); + cflag |= CS8; + break; + case BITS_DATA_9: + dbg("%s - data bits = 9 (not supported, using 8 data bits)", + __func__); + cflag |= CS8; + bits &= ~BITS_DATA_MASK; + bits |= BITS_DATA_8; + cp2101_set_config(port, CP2101_BITS, &bits, 2); + break; + default: + dbg("%s - Unknown number of data bits, using 8", __func__); + cflag |= CS8; + bits &= ~BITS_DATA_MASK; + bits |= BITS_DATA_8; + cp2101_set_config(port, CP2101_BITS, &bits, 2); + break; + } + + switch (bits & BITS_PARITY_MASK) { + case BITS_PARITY_NONE: + dbg("%s - parity = NONE", __func__); + cflag &= ~PARENB; + break; + case BITS_PARITY_ODD: + dbg("%s - parity = ODD", __func__); + cflag |= (PARENB|PARODD); + break; + case BITS_PARITY_EVEN: + dbg("%s - parity = EVEN", __func__); + cflag &= ~PARODD; + cflag |= PARENB; + break; + case BITS_PARITY_MARK: + dbg("%s - parity = MARK (not supported, disabling parity)", + __func__); + cflag &= ~PARENB; + bits &= ~BITS_PARITY_MASK; + cp2101_set_config(port, CP2101_BITS, &bits, 2); + break; + case BITS_PARITY_SPACE: + dbg("%s - parity = SPACE (not supported, disabling parity)", + __func__); + cflag &= ~PARENB; + bits &= ~BITS_PARITY_MASK; + cp2101_set_config(port, CP2101_BITS, &bits, 2); + break; + default: + dbg("%s - Unknown parity mode, disabling parity", __func__); + cflag &= ~PARENB; + bits &= ~BITS_PARITY_MASK; + cp2101_set_config(port, CP2101_BITS, &bits, 2); + break; + } + + cflag &= ~CSTOPB; + switch (bits & BITS_STOP_MASK) { + case BITS_STOP_1: + dbg("%s - stop bits = 1", __func__); + break; + case BITS_STOP_1_5: + dbg("%s - stop bits = 1.5 (not supported, using 1 stop bit)", + __func__); + bits &= ~BITS_STOP_MASK; + cp2101_set_config(port, CP2101_BITS, &bits, 2); + break; + case BITS_STOP_2: + dbg("%s - stop bits = 2", __func__); + cflag |= CSTOPB; + break; + default: + dbg("%s - Unknown number of stop bits, using 1 stop bit", + __func__); + bits &= ~BITS_STOP_MASK; + cp2101_set_config(port, CP2101_BITS, &bits, 2); + break; + } + + cp2101_get_config(port, CP2101_MODEMCTL, modem_ctl, 16); + if (modem_ctl[0] & 0x0008) { + dbg("%s - flow control = CRTSCTS", __func__); + cflag |= CRTSCTS; + } else { + dbg("%s - flow control = NONE", __func__); + cflag &= ~CRTSCTS; + } + + tty->termios->c_cflag = cflag; +} + +static void cp2101_set_termios(struct tty_struct *tty, + struct usb_serial_port *port, struct ktermios *old_termios) +{ + unsigned int cflag, old_cflag; + unsigned int baud = 0, bits; + unsigned int modem_ctl[4]; + + dbg("%s - port %d", __func__, port->number); + + if (!tty) + return; + + tty->termios->c_cflag &= ~CMSPAR; + cflag = tty->termios->c_cflag; + old_cflag = old_termios->c_cflag; + baud = cp2101_quantise_baudrate(tty_get_baud_rate(tty)); + + /* If the baud rate is to be updated*/ + if (baud != tty_termios_baud_rate(old_termios) && baud != 0) { + dbg("%s - Setting baud rate to %d baud", __func__, + baud); + if (cp2101_set_config_single(port, CP2101_BAUDRATE, + ((BAUD_RATE_GEN_FREQ + baud/2) / baud))) { + dbg("Baud rate requested not supported by device\n"); + baud = tty_termios_baud_rate(old_termios); + } + } + /* Report back the resulting baud rate */ + tty_encode_baud_rate(tty, baud, baud); + + /* If the number of data bits is to be updated */ + if ((cflag & CSIZE) != (old_cflag & CSIZE)) { + cp2101_get_config(port, CP2101_BITS, &bits, 2); + bits &= ~BITS_DATA_MASK; + switch (cflag & CSIZE) { + case CS5: + bits |= BITS_DATA_5; + dbg("%s - data bits = 5", __func__); + break; + case CS6: + bits |= BITS_DATA_6; + dbg("%s - data bits = 6", __func__); + break; + case CS7: + bits |= BITS_DATA_7; + dbg("%s - data bits = 7", __func__); + break; + case CS8: + bits |= BITS_DATA_8; + dbg("%s - data bits = 8", __func__); + break; + /*case CS9: + bits |= BITS_DATA_9; + dbg("%s - data bits = 9", __func__); + break;*/ + default: + dbg("cp2101 driver does not " + "support the number of bits requested," + " using 8 bit mode\n"); + bits |= BITS_DATA_8; + break; + } + if (cp2101_set_config(port, CP2101_BITS, &bits, 2)) + dbg("Number of data bits requested " + "not supported by device\n"); + } + + if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD))) { + cp2101_get_config(port, CP2101_BITS, &bits, 2); + bits &= ~BITS_PARITY_MASK; + if (cflag & PARENB) { + if (cflag & PARODD) { + bits |= BITS_PARITY_ODD; + dbg("%s - parity = ODD", __func__); + } else { + bits |= BITS_PARITY_EVEN; + dbg("%s - parity = EVEN", __func__); + } + } + if (cp2101_set_config(port, CP2101_BITS, &bits, 2)) + dbg("Parity mode not supported " + "by device\n"); + } + + if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) { + cp2101_get_config(port, CP2101_BITS, &bits, 2); + bits &= ~BITS_STOP_MASK; + if (cflag & CSTOPB) { + bits |= BITS_STOP_2; + dbg("%s - stop bits = 2", __func__); + } else { + bits |= BITS_STOP_1; + dbg("%s - stop bits = 1", __func__); + } + if (cp2101_set_config(port, CP2101_BITS, &bits, 2)) + dbg("Number of stop bits requested " + "not supported by device\n"); + } + + if ((cflag & CRTSCTS) != (old_cflag & CRTSCTS)) { + cp2101_get_config(port, CP2101_MODEMCTL, modem_ctl, 16); + dbg("%s - read modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x", + __func__, modem_ctl[0], modem_ctl[1], + modem_ctl[2], modem_ctl[3]); + + if (cflag & CRTSCTS) { + modem_ctl[0] &= ~0x7B; + modem_ctl[0] |= 0x09; + modem_ctl[1] = 0x80; + dbg("%s - flow control = CRTSCTS", __func__); + } else { + modem_ctl[0] &= ~0x7B; + modem_ctl[0] |= 0x01; + modem_ctl[1] |= 0x40; + dbg("%s - flow control = NONE", __func__); + } + + dbg("%s - write modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x", + __func__, modem_ctl[0], modem_ctl[1], + modem_ctl[2], modem_ctl[3]); + cp2101_set_config(port, CP2101_MODEMCTL, modem_ctl, 16); + } + +} + +static int cp2101_tiocmset (struct tty_struct *tty, struct file *file, + unsigned int set, unsigned int clear) +{ + struct usb_serial_port *port = tty->driver_data; + unsigned int control = 0; + + dbg("%s - port %d", __func__, port->number); + + if (set & TIOCM_RTS) { + control |= CONTROL_RTS; + control |= CONTROL_WRITE_RTS; + } + if (set & TIOCM_DTR) { + control |= CONTROL_DTR; + control |= CONTROL_WRITE_DTR; + } + if (clear & TIOCM_RTS) { + control &= ~CONTROL_RTS; + control |= CONTROL_WRITE_RTS; + } + if (clear & TIOCM_DTR) { + control &= ~CONTROL_DTR; + control |= CONTROL_WRITE_DTR; + } + + dbg("%s - control = 0x%.4x", __func__, control); + + return cp2101_set_config(port, CP2101_CONTROL, &control, 2); + +} + +static int cp2101_tiocmget (struct tty_struct *tty, struct file *file) +{ + struct usb_serial_port *port = tty->driver_data; + unsigned int control; + int result; + + dbg("%s - port %d", __func__, port->number); + + cp2101_get_config(port, CP2101_CONTROL, &control, 1); + + result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0) + |((control & CONTROL_RTS) ? TIOCM_RTS : 0) + |((control & CONTROL_CTS) ? TIOCM_CTS : 0) + |((control & CONTROL_DSR) ? TIOCM_DSR : 0) + |((control & CONTROL_RING)? TIOCM_RI : 0) + |((control & CONTROL_DCD) ? TIOCM_CD : 0); + + dbg("%s - control = 0x%.2x", __func__, control); + + return result; +} + +static void cp2101_break_ctl (struct tty_struct *tty, int break_state) +{ + struct usb_serial_port *port = tty->driver_data; + unsigned int state; + + dbg("%s - port %d", __func__, port->number); + if (break_state == 0) + state = BREAK_OFF; + else + state = BREAK_ON; + dbg("%s - turning break %s", __func__, + state == BREAK_OFF ? "off" : "on"); + cp2101_set_config(port, CP2101_BREAK, &state, 2); +} + +static int cp2101_startup(struct usb_serial *serial) +{ + /* CP2101 buffers behave strangely unless device is reset */ + usb_reset_device(serial->dev); + return 0; +} + +static void cp2101_shutdown(struct usb_serial *serial) +{ + int i; + + dbg("%s", __func__); + + /* Stop reads and writes on all ports */ + for (i = 0; i < serial->num_ports; ++i) + cp2101_cleanup(serial->port[i]); +} + +static int __init cp2101_init(void) +{ + int retval; + + retval = usb_serial_register(&cp2101_device); + if (retval) + return retval; /* Failed to register */ + + retval = usb_register(&cp2101_driver); + if (retval) { + /* Failed to register */ + usb_serial_deregister(&cp2101_device); + return retval; + } + + /* Success */ + printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":" + DRIVER_DESC "\n"); + return 0; +} + +static void __exit cp2101_exit(void) +{ + usb_deregister(&cp2101_driver); + usb_serial_deregister(&cp2101_device); +} + +module_init(cp2101_init); +module_exit(cp2101_exit); + +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_VERSION(DRIVER_VERSION); +MODULE_LICENSE("GPL"); + +module_param(debug, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(debug, "Enable verbose debugging messages"); -- cgit v1.1 From 3edb8a208b5be90c829f7b19058cb63e947b1d18 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 26 Feb 2009 23:02:19 +0000 Subject: USB: ohci-s3c2410: remove include Remove the include of , as no definitions from it are used by the OHCI driver. Signed-off-by: Ben Dooks Acked-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ohci-s3c2410.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c index f46af7a..0e62d20 100644 --- a/drivers/usb/host/ohci-s3c2410.c +++ b/drivers/usb/host/ohci-s3c2410.c @@ -22,7 +22,6 @@ #include #include -#include #include #define valid_port(idx) ((idx) == 1 || (idx) == 2) -- cgit v1.1 From 2dfa319a649b9de029777994b6af201c1fe81d53 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Thu, 26 Feb 2009 23:03:15 +0000 Subject: USB: ohci-s3c2410: fix name of bus clock The USB bus clock is usb-bus-host, so print the correct name in the dev_err() statement if we cannot find it. Signed-off-by: Ben Dooks Acked-by: David Brownell --- drivers/usb/host/ohci-s3c2410.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c index 0e62d20..a7ddd5d 100644 --- a/drivers/usb/host/ohci-s3c2410.c +++ b/drivers/usb/host/ohci-s3c2410.c @@ -371,7 +371,7 @@ static int usb_hcd_s3c2410_probe (const struct hc_driver *driver, usb_clk = clk_get(&dev->dev, "usb-bus-host"); if (IS_ERR(usb_clk)) { - dev_err(&dev->dev, "cannot get usb-host clock\n"); + dev_err(&dev->dev, "cannot get usb-bus-host clock\n"); retval = -ENOENT; goto err_clk; } -- cgit v1.1 From a9f8ec4db1d308643e13ec7638ccb5ace4d34982 Mon Sep 17 00:00:00 2001 From: Hannes Eder Date: Fri, 27 Feb 2009 02:04:31 +0100 Subject: USB: host: fix sparse warning: Using plain integer as NULL pointer MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Fix this sparse warning:  drivers/usb/host/oxu210hp-hcd.c:2687:42: warning: Using plain integer as NULL pointer Signed-off-by: Hannes Eder Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/oxu210hp-hcd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c index 2947c69..5ac489e 100644 --- a/drivers/usb/host/oxu210hp-hcd.c +++ b/drivers/usb/host/oxu210hp-hcd.c @@ -2684,7 +2684,7 @@ static int oxu_reset(struct usb_hcd *hcd) oxu->urb_len = 0; /* FIMXE */ - hcd->self.controller->dma_mask = 0UL; + hcd->self.controller->dma_mask = NULL; if (oxu->is_otg) { oxu->caps = hcd->regs + OXU_OTG_CAP_OFFSET; -- cgit v1.1 From 3ba5f38f3d5143a879de132a9df71814d1f3cff0 Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sat, 7 Mar 2009 11:44:10 +0000 Subject: USB: ohci-hcd: Add ARCH_S3C24XX to the ohci-s3c2410.c glue The ohci-s3c2410.c glue supports both CONFIG_ARCH_S3C2410 and CONFIG_ARCH_S3C64XX so add it to the build of ohci-s3c2410.c Signed-off-by: Ben Dooks Cc: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ohci-hcd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 5cf5f1e..d052955 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -997,7 +997,7 @@ MODULE_LICENSE ("GPL"); #define SA1111_DRIVER ohci_hcd_sa1111_driver #endif -#ifdef CONFIG_ARCH_S3C2410 +#if defined(CONFIG_ARCH_S3C2410) || defined(CONFIG_ARCH_S3C64XX) #include "ohci-s3c2410.c" #define PLATFORM_DRIVER ohci_hcd_s3c2410_driver #endif -- cgit v1.1 From 49121aa14c2a372a5fd01982df900257784be63d Mon Sep 17 00:00:00 2001 From: Ben Dooks Date: Sat, 7 Mar 2009 11:44:21 +0000 Subject: USB: S3C: Move usb-control.h to platform include The usb-control.h is needed by ohci-s3c2410.c for both S3C24XX and S3C64XX architectures, so move it to Signed-off-by: Ben Dooks Cc: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ohci-s3c2410.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/ohci-s3c2410.c b/drivers/usb/host/ohci-s3c2410.c index a7ddd5d..a68af2d 100644 --- a/drivers/usb/host/ohci-s3c2410.c +++ b/drivers/usb/host/ohci-s3c2410.c @@ -21,8 +21,7 @@ #include #include - -#include +#include #define valid_port(idx) ((idx) == 1 || (idx) == 2) -- cgit v1.1 From 1b8fb4141eb52f4aace9f152dad3e4c1609b76fe Mon Sep 17 00:00:00 2001 From: Mark Ellis Date: Mon, 9 Mar 2009 22:24:29 +0000 Subject: USB: ipaq: handle 4 endpoint devices The ipaq driver currently enforces one port on all devices. This is correct for 2 and 3 endpoint devices, but with 4 endpoint devices meaningful communication occurs on the second pair. This patch allows 2 ports for 4 endpoint devices. Signed-off-by: Mark Ellis Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ipaq.c | 43 +++++++++++++++++++++++++++++++++++++------ 1 file changed, 37 insertions(+), 6 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c index 132be74..ef92095 100644 --- a/drivers/usb/serial/ipaq.c +++ b/drivers/usb/serial/ipaq.c @@ -78,6 +78,7 @@ static int ipaq_open(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); static void ipaq_close(struct tty_struct *tty, struct usb_serial_port *port, struct file *filp); +static int ipaq_calc_num_ports(struct usb_serial *serial); static int ipaq_startup(struct usb_serial *serial); static void ipaq_shutdown(struct usb_serial *serial); static int ipaq_write(struct tty_struct *tty, struct usb_serial_port *port, @@ -572,15 +573,10 @@ static struct usb_serial_driver ipaq_device = { .description = "PocketPC PDA", .usb_driver = &ipaq_driver, .id_table = ipaq_id_table, - /* - * some devices have an extra endpoint, which - * must be ignored as it would make the core - * create a second port which oopses when used - */ - .num_ports = 1, .open = ipaq_open, .close = ipaq_close, .attach = ipaq_startup, + .calc_num_ports = ipaq_calc_num_ports, .shutdown = ipaq_shutdown, .write = ipaq_write, .write_room = ipaq_write_room, @@ -956,14 +952,49 @@ static void ipaq_destroy_lists(struct usb_serial_port *port) } +static int ipaq_calc_num_ports(struct usb_serial *serial) +{ + /* + * some devices have 3 endpoints, the 3rd of which + * must be ignored as it would make the core + * create a second port which oopses when used + */ + int ipaq_num_ports = 1; + + dbg("%s - numberofendpoints: %d", __FUNCTION__, + (int)serial->interface->cur_altsetting->desc.bNumEndpoints); + + /* + * a few devices have 4 endpoints, seemingly Yakuma devices, + * and we need the second pair, so let them have 2 ports + * + * TODO: can we drop port 1 ? + */ + if (serial->interface->cur_altsetting->desc.bNumEndpoints > 3) { + ipaq_num_ports = 2; + } + + return ipaq_num_ports; +} + + static int ipaq_startup(struct usb_serial *serial) { dbg("%s", __func__); if (serial->dev->actconfig->desc.bConfigurationValue != 1) { + /* + * FIXME: HP iPaq rx3715, possibly others, have 1 config that + * is labeled as 2 + */ + dev_err(&serial->dev->dev, "active config #%d != 1 ??\n", serial->dev->actconfig->desc.bConfigurationValue); return -ENODEV; } + + dbg("%s - iPAQ module configured for %d ports", + __FUNCTION__, serial->num_ports); + return usb_reset_configuration(serial->dev); } -- cgit v1.1 From d23bac9f8b3cf1ad674d6390364d559103013213 Mon Sep 17 00:00:00 2001 From: Alex Stephens Date: Tue, 17 Mar 2009 00:06:19 +0000 Subject: USB: CP2101 New Device ID One new device ID for CP2101 driver. Signed-off-by: Alex Stephens alex@miranova.com --- drivers/usb/serial/cp210x.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 2f23d06..292f016 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -87,6 +87,7 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */ { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */ { USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */ + { USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */ { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */ { USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */ -- cgit v1.1 From d2ad67b3fa61eed52b22491210c668a94c7bf17e Mon Sep 17 00:00:00 2001 From: VomLehn Date: Thu, 12 Mar 2009 14:37:42 -0700 Subject: USB: Fix cp2101 USB serial device driver termios functions for console use This is really a follow up to the modifications Alan Cox made for commit 95da310e66ee8090119596c70ca8432e57f9a97f to pass a tty_struct to various interface functions, which broke the serial configuration (termios) functions when the device is being used as a console. These changes restore the configuration to proper functioning both as a tty and as a console. As Alan notes in that commit, these changes will need to be tweaked when we have a proper console abstraction. Signed-off-by: David VomLehn Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/cp210x.c | 53 ++++++++++++++++++++++++++++++++++++--------- 1 file changed, 43 insertions(+), 10 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c index 292f016..e8d5133 100644 --- a/drivers/usb/serial/cp210x.c +++ b/drivers/usb/serial/cp210x.c @@ -38,17 +38,21 @@ static int cp2101_open(struct tty_struct *, struct usb_serial_port *, static void cp2101_cleanup(struct usb_serial_port *); static void cp2101_close(struct tty_struct *, struct usb_serial_port *, struct file*); -static void cp2101_get_termios(struct tty_struct *); +static void cp2101_get_termios(struct tty_struct *, + struct usb_serial_port *port); +static void cp2101_get_termios_port(struct usb_serial_port *port, + unsigned int *cflagp, unsigned int *baudp); static void cp2101_set_termios(struct tty_struct *, struct usb_serial_port *, struct ktermios*); static int cp2101_tiocmget(struct tty_struct *, struct file *); static int cp2101_tiocmset(struct tty_struct *, struct file *, unsigned int, unsigned int); +static int cp2101_tiocmset_port(struct usb_serial_port *port, struct file *, + unsigned int, unsigned int); static void cp2101_break_ctl(struct tty_struct *, int); static int cp2101_startup(struct usb_serial *); static void cp2101_shutdown(struct usb_serial *); - static int debug; static struct usb_device_id id_table [] = { @@ -369,10 +373,12 @@ static int cp2101_open(struct tty_struct *tty, struct usb_serial_port *port, } /* Configure the termios structure */ - cp2101_get_termios(tty); + cp2101_get_termios(tty, port); /* Set the DTR and RTS pins low */ - cp2101_tiocmset(tty, NULL, TIOCM_DTR | TIOCM_RTS, 0); + cp2101_tiocmset_port(tty ? (struct usb_serial_port *) tty->driver_data + : port, + NULL, TIOCM_DTR | TIOCM_RTS, 0); return 0; } @@ -414,9 +420,31 @@ static void cp2101_close(struct tty_struct *tty, struct usb_serial_port *port, * from the device, corrects any unsupported values, and configures the * termios structure to reflect the state of the device */ -static void cp2101_get_termios (struct tty_struct *tty) +static void cp2101_get_termios(struct tty_struct *tty, + struct usb_serial_port *port) +{ + unsigned int baud; + + if (tty) { + cp2101_get_termios_port(tty->driver_data, + &tty->termios->c_cflag, &baud); + tty_encode_baud_rate(tty, baud, baud); + } + + else { + unsigned int cflag; + cflag = 0; + cp2101_get_termios_port(port, &cflag, &baud); + } +} + +/* + * cp2101_get_termios_port + * This is the heart of cp2101_get_termios which always uses a &usb_serial_port. + */ +static void cp2101_get_termios_port(struct usb_serial_port *port, + unsigned int *cflagp, unsigned int *baudp) { - struct usb_serial_port *port = tty->driver_data; unsigned int cflag, modem_ctl[4]; unsigned int baud; unsigned int bits; @@ -429,9 +457,9 @@ static void cp2101_get_termios (struct tty_struct *tty) baud = cp2101_quantise_baudrate((BAUD_RATE_GEN_FREQ + baud/2)/ baud); dbg("%s - baud rate = %d", __func__, baud); + *baudp = baud; - tty_encode_baud_rate(tty, baud, baud); - cflag = tty->termios->c_cflag; + cflag = *cflagp; cp2101_get_config(port, CP2101_BITS, &bits, 2); cflag &= ~CSIZE; @@ -537,7 +565,7 @@ static void cp2101_get_termios (struct tty_struct *tty) cflag &= ~CRTSCTS; } - tty->termios->c_cflag = cflag; + *cflagp = cflag; } static void cp2101_set_termios(struct tty_struct *tty, @@ -669,6 +697,12 @@ static int cp2101_tiocmset (struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear) { struct usb_serial_port *port = tty->driver_data; + return cp2101_tiocmset_port(port, file, set, clear); +} + +static int cp2101_tiocmset_port(struct usb_serial_port *port, struct file *file, + unsigned int set, unsigned int clear) +{ unsigned int control = 0; dbg("%s - port %d", __func__, port->number); @@ -693,7 +727,6 @@ static int cp2101_tiocmset (struct tty_struct *tty, struct file *file, dbg("%s - control = 0x%.4x", __func__, control); return cp2101_set_config(port, CP2101_CONTROL, &control, 2); - } static int cp2101_tiocmget (struct tty_struct *tty, struct file *file) -- cgit v1.1 From 71d2718f2507dc17501d04e2bdca7b8e694ce365 Mon Sep 17 00:00:00 2001 From: Roel Kluin Date: Fri, 13 Mar 2009 12:19:18 +0100 Subject: USB: more u32 conversion after transfer_buffer_length and actual_length transfer_buffer_length and actual_length have become unsigned, therefore some additional conversion of local variables, function arguments and print specifications is desired. A test for a negative urb->transfer_buffer_length became obsolete; instead we ensure that it does not exceed INT_MAX. Also, urb->actual_length is always less than urb->transfer_buffer_length. rh_string() does no longer return -EPIPE in the case of an unsupported ID. Instead its only caller, rh_call_control() does the check. Signed-off-by: Roel Kluin Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/devio.c | 6 +++--- drivers/usb/core/hcd.c | 31 ++++++++++++------------------- drivers/usb/core/hub.c | 2 +- drivers/usb/core/message.c | 2 +- drivers/usb/core/urb.c | 2 +- 5 files changed, 18 insertions(+), 25 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index d3883f6..df3c539 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -302,7 +302,7 @@ static struct async *async_getpending(struct dev_state *ps, static void snoop_urb(struct urb *urb, void __user *userurb) { - int j; + unsigned j; unsigned char *data = urb->transfer_buffer; if (!usbfs_snoop) @@ -311,9 +311,9 @@ static void snoop_urb(struct urb *urb, void __user *userurb) dev_info(&urb->dev->dev, "direction=%s\n", usb_urb_dir_in(urb) ? "IN" : "OUT"); dev_info(&urb->dev->dev, "userurb=%p\n", userurb); - dev_info(&urb->dev->dev, "transfer_buffer_length=%d\n", + dev_info(&urb->dev->dev, "transfer_buffer_length=%u\n", urb->transfer_buffer_length); - dev_info(&urb->dev->dev, "actual_length=%d\n", urb->actual_length); + dev_info(&urb->dev->dev, "actual_length=%u\n", urb->actual_length); dev_info(&urb->dev->dev, "data: "); for (j = 0; j < urb->transfer_buffer_length; ++j) printk("%02x ", data[j]); diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 0eee32a..81fa850 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -279,9 +279,9 @@ static const u8 hs_rh_config_descriptor [] = { * helper routine for returning string descriptors in UTF-16LE * input can actually be ISO-8859-1; ASCII is its 7-bit subset */ -static int ascii2utf (char *s, u8 *utf, int utfmax) +static unsigned ascii2utf(char *s, u8 *utf, int utfmax) { - int retval; + unsigned retval; for (retval = 0; *s && utfmax > 1; utfmax -= 2, retval += 2) { *utf++ = *s++; @@ -304,19 +304,15 @@ static int ascii2utf (char *s, u8 *utf, int utfmax) * Produces either a manufacturer, product or serial number string for the * virtual root hub device. */ -static int rh_string ( - int id, - struct usb_hcd *hcd, - u8 *data, - int len -) { +static unsigned rh_string(int id, struct usb_hcd *hcd, u8 *data, unsigned len) +{ char buf [100]; // language ids if (id == 0) { buf[0] = 4; buf[1] = 3; /* 4 bytes string data */ buf[2] = 0x09; buf[3] = 0x04; /* MSFT-speak for "en-us" */ - len = min (len, 4); + len = min_t(unsigned, len, 4); memcpy (data, buf, len); return len; @@ -332,10 +328,7 @@ static int rh_string ( } else if (id == 3) { snprintf (buf, sizeof buf, "%s %s %s", init_utsname()->sysname, init_utsname()->release, hcd->driver->description); - - // unsupported IDs --> "protocol stall" - } else - return -EPIPE; + } switch (len) { /* All cases fall through */ default: @@ -360,9 +353,8 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb) u8 tbuf [sizeof (struct usb_hub_descriptor)] __attribute__((aligned(4))); const u8 *bufp = tbuf; - int len = 0; + unsigned len = 0; int status; - int n; u8 patch_wakeup = 0; u8 patch_protocol = 0; @@ -456,10 +448,11 @@ static int rh_call_control (struct usb_hcd *hcd, struct urb *urb) patch_wakeup = 1; break; case USB_DT_STRING << 8: - n = rh_string (wValue & 0xff, hcd, ubuf, wLength); - if (n < 0) + if ((wValue & 0xff) < 4) + urb->actual_length = rh_string(wValue & 0xff, + hcd, ubuf, wLength); + else /* unsupported IDs --> "protocol stall" */ goto error; - urb->actual_length = n; break; default: goto error; @@ -629,7 +622,7 @@ static int rh_queue_status (struct usb_hcd *hcd, struct urb *urb) { int retval; unsigned long flags; - int len = 1 + (urb->dev->maxchild / 8); + unsigned len = 1 + (urb->dev->maxchild / 8); spin_lock_irqsave (&hcd_root_hub_lock, flags); if (hcd->status_urb || urb->transfer_buffer_length < len) { diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 81eb3e6..be86ae3 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -392,7 +392,7 @@ static void hub_irq(struct urb *urb) { struct usb_hub *hub = urb->context; int status = urb->status; - int i; + unsigned i; unsigned long bits; switch (status) { diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 3922fa9..293a30d 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -59,7 +59,7 @@ static int usb_start_wait_urb(struct urb *urb, int timeout, int *actual_length) retval = (ctx.status == -ENOENT ? -ETIMEDOUT : ctx.status); dev_dbg(&urb->dev->dev, - "%s timed out on ep%d%s len=%d/%d\n", + "%s timed out on ep%d%s len=%u/%u\n", current->comm, usb_endpoint_num(&urb->ep->desc), usb_urb_dir_in(urb) ? "in" : "out", diff --git a/drivers/usb/core/urb.c b/drivers/usb/core/urb.c index 7025d80..3376055 100644 --- a/drivers/usb/core/urb.c +++ b/drivers/usb/core/urb.c @@ -370,7 +370,7 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags) } /* the I/O buffer must be mapped/unmapped, except when length=0 */ - if (urb->transfer_buffer_length < 0) + if (urb->transfer_buffer_length > INT_MAX) return -EMSGSIZE; #ifdef DEBUG -- cgit v1.1 From e1e609be49c9d345e8b67a122a7cdae48ad27c7e Mon Sep 17 00:00:00 2001 From: Yoshihiro Shimoda Date: Thu, 19 Mar 2009 14:18:15 +0900 Subject: USB: r8a66597-hcd: suspend/resume support Fix the problem that system cannot suspend. Signed-off-by: Yoshihiro Shimoda Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/r8a66597-hcd.c | 101 +++++++++++++++++++++++++++++++++++++++- drivers/usb/host/r8a66597.h | 2 + 2 files changed, 102 insertions(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/r8a66597-hcd.c b/drivers/usb/host/r8a66597-hcd.c index 713f4cf..f1626e5 100644 --- a/drivers/usb/host/r8a66597-hcd.c +++ b/drivers/usb/host/r8a66597-hcd.c @@ -1013,6 +1013,9 @@ static void r8a66597_check_syssts(struct r8a66597 *r8a66597, int port, r8a66597_write(r8a66597, ~DTCH, get_intsts_reg(port)); r8a66597_bset(r8a66597, DTCHE, get_intenb_reg(port)); + + if (r8a66597->bus_suspended) + usb_hcd_resume_root_hub(r8a66597_to_hcd(r8a66597)); } /* this function must be called with interrupt disabled */ @@ -1614,6 +1617,11 @@ static irqreturn_t r8a66597_irq(struct usb_hcd *hcd) r8a66597_bclr(r8a66597, DTCHE, INTENB2); r8a66597_usb_disconnect(r8a66597, 1); } + if (mask2 & BCHG) { + r8a66597_write(r8a66597, ~BCHG, INTSTS2); + r8a66597_bclr(r8a66597, BCHGE, INTENB2); + usb_hcd_resume_root_hub(r8a66597_to_hcd(r8a66597)); + } } if (mask1) { @@ -1629,6 +1637,12 @@ static irqreturn_t r8a66597_irq(struct usb_hcd *hcd) r8a66597_bclr(r8a66597, DTCHE, INTENB1); r8a66597_usb_disconnect(r8a66597, 0); } + if (mask1 & BCHG) { + r8a66597_write(r8a66597, ~BCHG, INTSTS1); + r8a66597_bclr(r8a66597, BCHGE, INTENB1); + usb_hcd_resume_root_hub(r8a66597_to_hcd(r8a66597)); + } + if (mask1 & SIGN) { r8a66597_write(r8a66597, ~SIGN, INTSTS1); status = get_urb_error(r8a66597, 0); @@ -2140,7 +2154,7 @@ static int r8a66597_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, switch (wValue) { case USB_PORT_FEAT_ENABLE: - rh->port &= (1 << USB_PORT_FEAT_POWER); + rh->port &= ~(1 << USB_PORT_FEAT_POWER); break; case USB_PORT_FEAT_SUSPEND: break; @@ -2212,6 +2226,68 @@ error: return ret; } +#if defined(CONFIG_PM) +static int r8a66597_bus_suspend(struct usb_hcd *hcd) +{ + struct r8a66597 *r8a66597 = hcd_to_r8a66597(hcd); + int port; + + dbg("%s", __func__); + + for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++) { + struct r8a66597_root_hub *rh = &r8a66597->root_hub[port]; + unsigned long dvstctr_reg = get_dvstctr_reg(port); + + if (!(rh->port & (1 << USB_PORT_FEAT_ENABLE))) + continue; + + dbg("suspend port = %d", port); + r8a66597_bclr(r8a66597, UACT, dvstctr_reg); /* suspend */ + rh->port |= 1 << USB_PORT_FEAT_SUSPEND; + + if (rh->dev->udev->do_remote_wakeup) { + msleep(3); /* waiting last SOF */ + r8a66597_bset(r8a66597, RWUPE, dvstctr_reg); + r8a66597_write(r8a66597, ~BCHG, get_intsts_reg(port)); + r8a66597_bset(r8a66597, BCHGE, get_intenb_reg(port)); + } + } + + r8a66597->bus_suspended = 1; + + return 0; +} + +static int r8a66597_bus_resume(struct usb_hcd *hcd) +{ + struct r8a66597 *r8a66597 = hcd_to_r8a66597(hcd); + int port; + + dbg("%s", __func__); + + for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++) { + struct r8a66597_root_hub *rh = &r8a66597->root_hub[port]; + unsigned long dvstctr_reg = get_dvstctr_reg(port); + + if (!(rh->port & (1 << USB_PORT_FEAT_SUSPEND))) + continue; + + dbg("resume port = %d", port); + rh->port &= ~(1 << USB_PORT_FEAT_SUSPEND); + rh->port |= 1 << USB_PORT_FEAT_C_SUSPEND; + r8a66597_mdfy(r8a66597, RESUME, RESUME | UACT, dvstctr_reg); + msleep(50); + r8a66597_mdfy(r8a66597, UACT, RESUME | UACT, dvstctr_reg); + } + + return 0; + +} +#else +#define r8a66597_bus_suspend NULL +#define r8a66597_bus_resume NULL +#endif + static struct hc_driver r8a66597_hc_driver = { .description = hcd_name, .hcd_priv_size = sizeof(struct r8a66597), @@ -2242,16 +2318,39 @@ static struct hc_driver r8a66597_hc_driver = { */ .hub_status_data = r8a66597_hub_status_data, .hub_control = r8a66597_hub_control, + .bus_suspend = r8a66597_bus_suspend, + .bus_resume = r8a66597_bus_resume, }; #if defined(CONFIG_PM) static int r8a66597_suspend(struct platform_device *pdev, pm_message_t state) { + struct r8a66597 *r8a66597 = dev_get_drvdata(&pdev->dev); + int port; + + dbg("%s", __func__); + + disable_controller(r8a66597); + + for (port = 0; port < R8A66597_MAX_ROOT_HUB; port++) { + struct r8a66597_root_hub *rh = &r8a66597->root_hub[port]; + + rh->port = 0x00000000; + } + return 0; } static int r8a66597_resume(struct platform_device *pdev) { + struct r8a66597 *r8a66597 = dev_get_drvdata(&pdev->dev); + struct usb_hcd *hcd = r8a66597_to_hcd(r8a66597); + + dbg("%s", __func__); + + enable_controller(r8a66597); + usb_root_hub_lost_power(hcd->self.root_hub); + return 0; } #else /* if defined(CONFIG_PM) */ diff --git a/drivers/usb/host/r8a66597.h b/drivers/usb/host/r8a66597.h index ecacde4..f49208f 100644 --- a/drivers/usb/host/r8a66597.h +++ b/drivers/usb/host/r8a66597.h @@ -504,6 +504,8 @@ struct r8a66597 { struct list_head child_device; unsigned long child_connect_map[4]; + + unsigned bus_suspended:1; }; static inline struct r8a66597 *hcd_to_r8a66597(struct usb_hcd *hcd) -- cgit v1.1 From 8942939a6c83f34615de5ae041cc9ca846923f94 Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 19 Mar 2009 14:14:17 -0700 Subject: USB: gadget: composite device-level suspend/resume hooks Address one open question in the composite gadget framework: Yes, we should have device-level suspend/resume callbacks in addition to the function-level ones. We have at least one scenario (with gadget zero in OTG test mode) that's awkward to handle without it. Signed-off-by: David Brownell Cc: Felipe Balbi Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/composite.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index 40f1da7..59e8523 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -1014,7 +1014,7 @@ composite_suspend(struct usb_gadget *gadget) struct usb_composite_dev *cdev = get_gadget_data(gadget); struct usb_function *f; - /* REVISIT: should we have config and device level + /* REVISIT: should we have config level * suspend/resume callbacks? */ DBG(cdev, "suspend\n"); @@ -1024,6 +1024,8 @@ composite_suspend(struct usb_gadget *gadget) f->suspend(f); } } + if (composite->suspend) + composite->suspend(cdev); } static void @@ -1032,10 +1034,12 @@ composite_resume(struct usb_gadget *gadget) struct usb_composite_dev *cdev = get_gadget_data(gadget); struct usb_function *f; - /* REVISIT: should we have config and device level + /* REVISIT: should we have config level * suspend/resume callbacks? */ DBG(cdev, "resume\n"); + if (composite->resume) + composite->resume(cdev); if (cdev->config) { list_for_each_entry(f, &cdev->config->functions, list) { if (f->resume) -- cgit v1.1 From ab943a2e125b098489ccaa0166c2c52f8266d9ed Mon Sep 17 00:00:00 2001 From: David Brownell Date: Thu, 19 Mar 2009 14:16:09 -0700 Subject: USB: gadget: gadget zero uses new suspend/resume hooks Use the new device-level suspend/resume hooks for Gadget Zero; always enable them with the OTG test mode; and support remote wakeup on both configurations even in non-OTG mode. This ensures that both configurations can pass the USBCV remote wakeup tests when the OTG test mode is enabled. This changes behavior by adding autoresume support to the loopback config even in non-OTG mode; the test failure was that it didn't work in OTG mode. Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/f_loopback.c | 6 +++- drivers/usb/gadget/f_sourcesink.c | 52 +---------------------------- drivers/usb/gadget/g_zero.h | 4 +-- drivers/usb/gadget/zero.c | 70 ++++++++++++++++++++++++++++++++++++--- 4 files changed, 74 insertions(+), 58 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/f_loopback.c b/drivers/usb/gadget/f_loopback.c index 83301bd..eb6ddfc 100644 --- a/drivers/usb/gadget/f_loopback.c +++ b/drivers/usb/gadget/f_loopback.c @@ -359,7 +359,7 @@ static struct usb_configuration loopback_driver = { * loopback_add - add a loopback testing configuration to a device * @cdev: the device to support the loopback configuration */ -int __init loopback_add(struct usb_composite_dev *cdev) +int __init loopback_add(struct usb_composite_dev *cdev, bool autoresume) { int id; @@ -372,6 +372,10 @@ int __init loopback_add(struct usb_composite_dev *cdev) loopback_intf.iInterface = id; loopback_driver.iConfiguration = id; + /* support autoresume for remote wakeup testing */ + if (autoresume) + sourcesink_driver.bmAttributes |= USB_CONFIG_ATT_WAKEUP; + /* support OTG systems */ if (gadget_is_otg(cdev->gadget)) { loopback_driver.descriptors = otg_desc; diff --git a/drivers/usb/gadget/f_sourcesink.c b/drivers/usb/gadget/f_sourcesink.c index 6aca5c8..bffe91d 100644 --- a/drivers/usb/gadget/f_sourcesink.c +++ b/drivers/usb/gadget/f_sourcesink.c @@ -59,7 +59,6 @@ struct f_sourcesink { struct usb_ep *in_ep; struct usb_ep *out_ep; - struct timer_list resume; }; static inline struct f_sourcesink *func_to_ss(struct usb_function *f) @@ -67,10 +66,6 @@ static inline struct f_sourcesink *func_to_ss(struct usb_function *f) return container_of(f, struct f_sourcesink, function); } -static unsigned autoresume; -module_param(autoresume, uint, 0); -MODULE_PARM_DESC(autoresume, "zero, or seconds before remote wakeup"); - static unsigned pattern; module_param(pattern, uint, 0); MODULE_PARM_DESC(pattern, "0 = all zeroes, 1 = mod63 "); @@ -155,21 +150,6 @@ static struct usb_gadget_strings *sourcesink_strings[] = { /*-------------------------------------------------------------------------*/ -static void sourcesink_autoresume(unsigned long _c) -{ - struct usb_composite_dev *cdev = (void *)_c; - struct usb_gadget *g = cdev->gadget; - - /* Normally the host would be woken up for something - * more significant than just a timer firing; likely - * because of some direct user request. - */ - if (g->speed != USB_SPEED_UNKNOWN) { - int status = usb_gadget_wakeup(g); - DBG(cdev, "%s --> %d\n", __func__, status); - } -} - static int __init sourcesink_bind(struct usb_configuration *c, struct usb_function *f) { @@ -198,9 +178,6 @@ autoconf_fail: goto autoconf_fail; ss->out_ep->driver_data = cdev; /* claim */ - setup_timer(&ss->resume, sourcesink_autoresume, - (unsigned long) c->cdev); - /* support high speed hardware */ if (gadget_is_dualspeed(c->cdev->gadget)) { hs_source_desc.bEndpointAddress = @@ -359,7 +336,6 @@ static void disable_source_sink(struct f_sourcesink *ss) cdev = ss->function.config->cdev; disable_endpoints(cdev, ss->in_ep, ss->out_ep); - del_timer(&ss->resume); VDBG(cdev, "%s disabled\n", ss->function.name); } @@ -426,30 +402,6 @@ static void sourcesink_disable(struct usb_function *f) disable_source_sink(ss); } -static void sourcesink_suspend(struct usb_function *f) -{ - struct f_sourcesink *ss = func_to_ss(f); - struct usb_composite_dev *cdev = f->config->cdev; - - if (cdev->gadget->speed == USB_SPEED_UNKNOWN) - return; - - if (autoresume) { - mod_timer(&ss->resume, jiffies + (HZ * autoresume)); - DBG(cdev, "suspend, wakeup in %d seconds\n", autoresume); - } else - DBG(cdev, "%s\n", __func__); -} - -static void sourcesink_resume(struct usb_function *f) -{ - struct f_sourcesink *ss = func_to_ss(f); - struct usb_composite_dev *cdev = f->config->cdev; - - DBG(cdev, "%s\n", __func__); - del_timer(&ss->resume); -} - /*-------------------------------------------------------------------------*/ static int __init sourcesink_bind_config(struct usb_configuration *c) @@ -467,8 +419,6 @@ static int __init sourcesink_bind_config(struct usb_configuration *c) ss->function.unbind = sourcesink_unbind; ss->function.set_alt = sourcesink_set_alt; ss->function.disable = sourcesink_disable; - ss->function.suspend = sourcesink_suspend; - ss->function.resume = sourcesink_resume; status = usb_add_function(c, &ss->function); if (status) @@ -559,7 +509,7 @@ static struct usb_configuration sourcesink_driver = { * sourcesink_add - add a source/sink testing configuration to a device * @cdev: the device to support the configuration */ -int __init sourcesink_add(struct usb_composite_dev *cdev) +int __init sourcesink_add(struct usb_composite_dev *cdev, bool autoresume) { int id; diff --git a/drivers/usb/gadget/g_zero.h b/drivers/usb/gadget/g_zero.h index dd2f16a..e84b3c4 100644 --- a/drivers/usb/gadget/g_zero.h +++ b/drivers/usb/gadget/g_zero.h @@ -19,7 +19,7 @@ void disable_endpoints(struct usb_composite_dev *cdev, struct usb_ep *in, struct usb_ep *out); /* configuration-specific linkup */ -int sourcesink_add(struct usb_composite_dev *cdev); -int loopback_add(struct usb_composite_dev *cdev); +int sourcesink_add(struct usb_composite_dev *cdev, bool autoresume); +int loopback_add(struct usb_composite_dev *cdev, bool autoresume); #endif /* __G_ZERO_H */ diff --git a/drivers/usb/gadget/zero.c b/drivers/usb/gadget/zero.c index 20614dc..2d77240 100644 --- a/drivers/usb/gadget/zero.c +++ b/drivers/usb/gadget/zero.c @@ -102,11 +102,21 @@ module_param(loopdefault, bool, S_IRUGO|S_IWUSR); #ifndef CONFIG_USB_ZERO_HNPTEST #define DRIVER_VENDOR_NUM 0x0525 /* NetChip */ #define DRIVER_PRODUCT_NUM 0xa4a0 /* Linux-USB "Gadget Zero" */ +#define DEFAULT_AUTORESUME 0 #else #define DRIVER_VENDOR_NUM 0x1a0a /* OTG test device IDs */ #define DRIVER_PRODUCT_NUM 0xbadd +#define DEFAULT_AUTORESUME 5 #endif +/* If the optional "autoresume" mode is enabled, it provides good + * functional coverage for the "USBCV" test harness from USB-IF. + * It's always set if OTG mode is enabled. + */ +unsigned autoresume = DEFAULT_AUTORESUME; +module_param(autoresume, uint, S_IRUGO); +MODULE_PARM_DESC(autoresume, "zero, or seconds before remote wakeup"); + /*-------------------------------------------------------------------------*/ static struct usb_device_descriptor device_desc = { @@ -212,6 +222,47 @@ void disable_endpoints(struct usb_composite_dev *cdev, /*-------------------------------------------------------------------------*/ +static struct timer_list autoresume_timer; + +static void zero_autoresume(unsigned long _c) +{ + struct usb_composite_dev *cdev = (void *)_c; + struct usb_gadget *g = cdev->gadget; + + /* unconfigured devices can't issue wakeups */ + if (!cdev->config) + return; + + /* Normally the host would be woken up for something + * more significant than just a timer firing; likely + * because of some direct user request. + */ + if (g->speed != USB_SPEED_UNKNOWN) { + int status = usb_gadget_wakeup(g); + INFO(cdev, "%s --> %d\n", __func__, status); + } +} + +static void zero_suspend(struct usb_composite_dev *cdev) +{ + if (cdev->gadget->speed == USB_SPEED_UNKNOWN) + return; + + if (autoresume) { + mod_timer(&autoresume_timer, jiffies + (HZ * autoresume)); + DBG(cdev, "suspend, wakeup in %d seconds\n", autoresume); + } else + DBG(cdev, "%s\n", __func__); +} + +static void zero_resume(struct usb_composite_dev *cdev) +{ + DBG(cdev, "%s\n", __func__); + del_timer(&autoresume_timer); +} + +/*-------------------------------------------------------------------------*/ + static int __init zero_bind(struct usb_composite_dev *cdev) { int gcnum; @@ -239,17 +290,19 @@ static int __init zero_bind(struct usb_composite_dev *cdev) strings_dev[STRING_SERIAL_IDX].id = id; device_desc.iSerialNumber = id; + setup_timer(&autoresume_timer, zero_autoresume, (unsigned long) cdev); + /* Register primary, then secondary configuration. Note that * SH3 only allows one config... */ if (loopdefault) { - loopback_add(cdev); + loopback_add(cdev, autoresume != 0); if (!gadget_is_sh(gadget)) - sourcesink_add(cdev); + sourcesink_add(cdev, autoresume != 0); } else { - sourcesink_add(cdev); + sourcesink_add(cdev, autoresume != 0); if (!gadget_is_sh(gadget)) - loopback_add(cdev); + loopback_add(cdev, autoresume != 0); } gcnum = usb_gadget_controller_number(gadget); @@ -278,11 +331,20 @@ static int __init zero_bind(struct usb_composite_dev *cdev) return 0; } +static int zero_unbind(struct usb_composite_dev *cdev) +{ + del_timer_sync(&autoresume_timer); + return 0; +} + static struct usb_composite_driver zero_driver = { .name = "zero", .dev = &device_desc, .strings = dev_strings, .bind = zero_bind, + .unbind = zero_unbind, + .suspend = zero_suspend, + .resume = zero_resume, }; MODULE_AUTHOR("David Brownell"); -- cgit v1.1 From 4c24b6d045a9d355c95ca4e6beb10ce2fd263390 Mon Sep 17 00:00:00 2001 From: Vernon Sauder Date: Fri, 20 Mar 2009 01:44:50 -0700 Subject: USB: pxa27x_udc: typo fixes and code cleanups This patch is a merge of patches : - fix function doc and debug - cleanup loop count - optimize code to remove local variable and extra check - init 'req' before use - add missing iounmap call [dbrownell@users.sourceforge.net: capitalize IN/OUT directions in doc] Signed-off-by: Vernon Sauder [folded by Robert Jarzmik Signed-off-by: Robert Jarzmik Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/pxa27x_udc.c | 54 ++++++++++++++++++----------------------- 1 file changed, 24 insertions(+), 30 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c index 91ba1e9..8cc676e 100644 --- a/drivers/usb/gadget/pxa27x_udc.c +++ b/drivers/usb/gadget/pxa27x_udc.c @@ -748,13 +748,13 @@ static void req_done(struct pxa_ep *ep, struct pxa27x_request *req, int status) } /** - * ep_end_out_req - Ends control endpoint in request + * ep_end_out_req - Ends endpoint OUT request * @ep: physical endpoint * @req: pxa request * * Context: ep->lock held * - * Ends endpoint in request (completes usb request). + * Ends endpoint OUT request (completes usb request). */ static void ep_end_out_req(struct pxa_ep *ep, struct pxa27x_request *req) { @@ -763,13 +763,13 @@ static void ep_end_out_req(struct pxa_ep *ep, struct pxa27x_request *req) } /** - * ep0_end_out_req - Ends control endpoint in request (ends data stage) + * ep0_end_out_req - Ends control endpoint OUT request (ends data stage) * @ep: physical endpoint * @req: pxa request * * Context: ep->lock held * - * Ends control endpoint in request (completes usb request), and puts + * Ends control endpoint OUT request (completes usb request), and puts * control endpoint into idle state */ static void ep0_end_out_req(struct pxa_ep *ep, struct pxa27x_request *req) @@ -780,13 +780,13 @@ static void ep0_end_out_req(struct pxa_ep *ep, struct pxa27x_request *req) } /** - * ep_end_in_req - Ends endpoint out request + * ep_end_in_req - Ends endpoint IN request * @ep: physical endpoint * @req: pxa request * * Context: ep->lock held * - * Ends endpoint out request (completes usb request). + * Ends endpoint IN request (completes usb request). */ static void ep_end_in_req(struct pxa_ep *ep, struct pxa27x_request *req) { @@ -795,20 +795,18 @@ static void ep_end_in_req(struct pxa_ep *ep, struct pxa27x_request *req) } /** - * ep0_end_in_req - Ends control endpoint out request (ends data stage) + * ep0_end_in_req - Ends control endpoint IN request (ends data stage) * @ep: physical endpoint * @req: pxa request * * Context: ep->lock held * - * Ends control endpoint out request (completes usb request), and puts + * Ends control endpoint IN request (completes usb request), and puts * control endpoint into status state */ static void ep0_end_in_req(struct pxa_ep *ep, struct pxa27x_request *req) { - struct pxa_udc *udc = ep->dev; - - set_ep0state(udc, IN_STATUS_STAGE); + set_ep0state(ep->dev, IN_STATUS_STAGE); ep_end_in_req(ep, req); } @@ -1168,7 +1166,7 @@ static int pxa_ep_queue(struct usb_ep *_ep, struct usb_request *_req, ep_end_in_req(ep, req); } else { ep_err(ep, "got a request of %d bytes while" - "in state WATI_ACK_SET_CONF_INTERF\n", + "in state WAIT_ACK_SET_CONF_INTERF\n", length); ep_del_request(ep, req); rc = -EL2HLT; @@ -1214,30 +1212,26 @@ static int pxa_ep_dequeue(struct usb_ep *_ep, struct usb_request *_req) struct udc_usb_ep *udc_usb_ep; struct pxa27x_request *req; unsigned long flags; - int rc; + int rc = -EINVAL; if (!_ep) - return -EINVAL; + return rc; udc_usb_ep = container_of(_ep, struct udc_usb_ep, usb_ep); ep = udc_usb_ep->pxa_ep; if (!ep || is_ep0(ep)) - return -EINVAL; + return rc; spin_lock_irqsave(&ep->lock, flags); /* make sure it's actually queued on this endpoint */ list_for_each_entry(req, &ep->queue, queue) { - if (&req->req == _req) + if (&req->req == _req) { + req_done(ep, req, -ECONNRESET); + rc = 0; break; + } } - rc = -EINVAL; - if (&req->req != _req) - goto out; - - rc = 0; - req_done(ep, req, -ECONNRESET); -out: spin_unlock_irqrestore(&ep->lock, flags); return rc; } @@ -1706,10 +1700,9 @@ static __init void udc_init_data(struct pxa_udc *dev) } /* USB endpoints init */ - for (i = 0; i < NR_USB_ENDPOINTS; i++) - if (i != 0) - list_add_tail(&dev->udc_usb_ep[i].usb_ep.ep_list, - &dev->gadget.ep_list); + for (i = 1; i < NR_USB_ENDPOINTS; i++) + list_add_tail(&dev->udc_usb_ep[i].usb_ep.ep_list, + &dev->gadget.ep_list); } /** @@ -1994,14 +1987,14 @@ static void handle_ep0(struct pxa_udc *udc, int fifo_irq, int opc_irq) struct pxa27x_request *req = NULL; int completed = 0; + if (!list_empty(&ep->queue)) + req = list_entry(ep->queue.next, struct pxa27x_request, queue); + udccsr0 = udc_ep_readl(ep, UDCCSR); ep_dbg(ep, "state=%s, req=%p, udccsr0=0x%03x, udcbcr=%d, irq_msk=%x\n", EP0_STNAME(udc), req, udccsr0, udc_ep_readl(ep, UDCBCR), (fifo_irq << 1 | opc_irq)); - if (!list_empty(&ep->queue)) - req = list_entry(ep->queue.next, struct pxa27x_request, queue); - if (udccsr0 & UDCCSR0_SST) { ep_dbg(ep, "clearing stall status\n"); nuke(ep, -EPIPE); @@ -2473,6 +2466,7 @@ static int __exit pxa_udc_remove(struct platform_device *_dev) platform_set_drvdata(_dev, NULL); the_controller = NULL; clk_put(udc->clk); + iounmap(udc->regs); return 0; } -- cgit v1.1 From b7af0bb26899bb47ae16fb41d2296111b0784a56 Mon Sep 17 00:00:00 2001 From: Daniel Mack Date: Fri, 20 Mar 2009 19:58:57 +0100 Subject: USB: allow malformed LANGID descriptors When an USB hardware does not provide a valid LANGID, fall back to value zero which is still a reasonable default for most devices. Signed-off-by: Daniel Mack Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/message.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 293a30d..30a0690 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -804,18 +804,16 @@ int usb_string(struct usb_device *dev, int index, char *buf, size_t size) dev_err(&dev->dev, "string descriptor 0 read error: %d\n", err); - goto errout; } else if (err < 4) { dev_err(&dev->dev, "string descriptor 0 too short\n"); - err = -EINVAL; - goto errout; } else { - dev->have_langid = 1; dev->string_langid = tbuf[2] | (tbuf[3] << 8); /* always use the first langid listed */ dev_dbg(&dev->dev, "default language 0x%04x\n", dev->string_langid); } + + dev->have_langid = 1; } err = usb_string_sub(dev, dev->string_langid, index, tbuf); -- cgit v1.1 From e6bdfe36e52f0e552b50acf49a82851eeb122fde Mon Sep 17 00:00:00 2001 From: Catalin Marinas Date: Mon, 23 Mar 2009 12:38:16 +0000 Subject: USB: isp1760: Add a delay before reading the SKIPMAP registers in isp1760-hcd.c The data read from the SKIPMAP registers is not immediately available after writing and the driver panics when a packet is enqueued from the interrupt handler. This patch adds an ndelay(195) before these registers are read (delay value mentioned in section 15.1.1.3 of the ISP1760 data sheet). Signed-off-by: Catalin Marinas Acked-by: Sebastian Andrzej Siewior Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/isp1760-hcd.c | 14 ++++++++++++++ 1 file changed, 14 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c index 3172c0f..cd07ea3 100644 --- a/drivers/usb/host/isp1760-hcd.c +++ b/drivers/usb/host/isp1760-hcd.c @@ -819,6 +819,13 @@ static void enqueue_an_ATL_packet(struct usb_hcd *hcd, struct isp1760_qh *qh, u32 atl_regs, payload; u32 buffstatus; + /* + * When this function is called from the interrupt handler to enqueue + * a follow-up packet, the SKIP register gets written and read back + * almost immediately. With ISP1761, this register requires a delay of + * 195ns between a write and subsequent read (see section 15.1.1.3). + */ + ndelay(195); skip_map = isp1760_readl(hcd->regs + HC_ATL_PTD_SKIPMAP_REG); BUG_ON(!skip_map); @@ -853,6 +860,13 @@ static void enqueue_an_INT_packet(struct usb_hcd *hcd, struct isp1760_qh *qh, u32 int_regs, payload; u32 buffstatus; + /* + * When this function is called from the interrupt handler to enqueue + * a follow-up packet, the SKIP register gets written and read back + * almost immediately. With ISP1761, this register requires a delay of + * 195ns between a write and subsequent read (see section 15.1.1.3). + */ + ndelay(195); skip_map = isp1760_readl(hcd->regs + HC_INT_PTD_SKIPMAP_REG); BUG_ON(!skip_map); -- cgit v1.1 From fd8345f8dea93691b0ceba55146088d8c05415f6 Mon Sep 17 00:00:00 2001 From: Alexander Shumakovitch Date: Sat, 21 Mar 2009 00:50:16 -0400 Subject: USB: qcserial: add device id for HP devices Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/qcserial.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 6c6add5..e6d6b0c 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -24,6 +24,8 @@ static int debug; static struct usb_device_id id_table[] = { {USB_DEVICE(0x05c6, 0x9211)}, /* Acer Gobi QDL device */ {USB_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */ + {USB_DEVICE(0x03f0, 0x1f1d)}, /* HP un2400 Gobi Modem Device */ + {USB_DEVICE(0x03f0, 0x201d)}, /* HP un2400 Gobi QDL Device */ { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, id_table); -- cgit v1.1 From 5df5852446196c9713e897ab5f9b8a168d971a00 Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Tue, 24 Mar 2009 16:38:23 -0700 Subject: usb: struct device - replace bus_id with dev_name(), dev_set_name() Acked-by: Greg Kroah-Hartman Signed-off-by: Kay Sievers --- drivers/usb/gadget/ci13xxx_udc.c | 2 +- drivers/usb/gadget/imx_udc.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/ci13xxx_udc.c b/drivers/usb/gadget/ci13xxx_udc.c index bebf911..7f4e5eb 100644 --- a/drivers/usb/gadget/ci13xxx_udc.c +++ b/drivers/usb/gadget/ci13xxx_udc.c @@ -2626,7 +2626,7 @@ static int udc_probe(struct device *dev, void __iomem *regs, const char *name) INIT_LIST_HEAD(&udc->gadget.ep_list); udc->gadget.ep0 = NULL; - strcpy(udc->gadget.dev.bus_id, "gadget"); + dev_set_name(&udc->gadget.dev, "gadget"); udc->gadget.dev.dma_mask = dev->dma_mask; udc->gadget.dev.parent = dev; udc->gadget.dev.release = udc_release; diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c index 77c5d0a..cd67ac7 100644 --- a/drivers/usb/gadget/imx_udc.c +++ b/drivers/usb/gadget/imx_udc.c @@ -1186,8 +1186,8 @@ static struct imx_udc_struct controller = { .ep0 = &controller.imx_ep[0].ep, .name = driver_name, .dev = { - .bus_id = "gadget", - }, + .init_name = "gadget", + }, }, .imx_ep[0] = { -- cgit v1.1 From 6866ac9db02ac1ec71f2aa720a1019581f69a725 Mon Sep 17 00:00:00 2001 From: Sachin Sant Date: Mon, 16 Feb 2009 19:10:11 +0530 Subject: USB: FHCI: use dev_name() in place of bus_id. Replace references to bus_id with dev_name() to fix fhci driver build break. drivers/usb/host/fhci-hcd.c:586: error: struct device has no member named bus_id drivers/usb/host/fhci-hcd.c:653: error: struct device has no member named bus_id drivers/usb/host/fhci-dbg.c:111: error: struct device has no member named bus_id Signed-off-by: Sachin Sant Acked-by: Anton Vorontsov Cc: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/fhci-dbg.c | 2 +- drivers/usb/host/fhci-hcd.c | 4 ++-- 2 files changed, 3 insertions(+), 3 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/fhci-dbg.c b/drivers/usb/host/fhci-dbg.c index 34e14ed..ea8a425 100644 --- a/drivers/usb/host/fhci-dbg.c +++ b/drivers/usb/host/fhci-dbg.c @@ -108,7 +108,7 @@ void fhci_dfs_create(struct fhci_hcd *fhci) { struct device *dev = fhci_to_hcd(fhci)->self.controller; - fhci->dfs_root = debugfs_create_dir(dev->bus_id, NULL); + fhci->dfs_root = debugfs_create_dir(dev_name(dev), NULL); if (!fhci->dfs_root) { WARN_ON(1); return; diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c index ba622cc..0951818 100644 --- a/drivers/usb/host/fhci-hcd.c +++ b/drivers/usb/host/fhci-hcd.c @@ -583,7 +583,7 @@ static int __devinit of_fhci_probe(struct of_device *ofdev, if (sprop && strcmp(sprop, "host")) return -ENODEV; - hcd = usb_create_hcd(&fhci_driver, dev, dev->bus_id); + hcd = usb_create_hcd(&fhci_driver, dev, dev_name(dev)); if (!hcd) { dev_err(dev, "could not create hcd\n"); return -ENOMEM; @@ -650,7 +650,7 @@ static int __devinit of_fhci_probe(struct of_device *ofdev, } } - ret = gpio_request(gpio, dev->bus_id); + ret = gpio_request(gpio, dev_name(dev)); if (ret) { dev_err(dev, "failed to request gpio %d", i); goto err_gpios; -- cgit v1.1