From 662c738d9946de521dcece2b146dced335242389 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Heiko=20St=C3=BCbner?= Date: Wed, 29 Feb 2012 23:03:11 +0100 Subject: usb: otg: gpio_vbus: Add otg transceiver events and notifiers Commit 9ad63986c606 (pda_power: Add support for using otg transceiver events) converted the pda-power driver to use otg events to determine the status of the power supply. As gpio-vbus didn't use otg events until now, this change breaks setups of pda-power with a gpio-vbus transceiver. This patch adds the necessary otg events and notifiers to gpio-vbus. Signed-off-by: Heiko Stuebner Reviewed-by: Dima Zavin Signed-off-by: Felipe Balbi --- drivers/usb/otg/gpio_vbus.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/otg/gpio_vbus.c b/drivers/usb/otg/gpio_vbus.c index 3ece43a..a0a2178 100644 --- a/drivers/usb/otg/gpio_vbus.c +++ b/drivers/usb/otg/gpio_vbus.c @@ -96,7 +96,7 @@ static void gpio_vbus_work(struct work_struct *work) struct gpio_vbus_data *gpio_vbus = container_of(work, struct gpio_vbus_data, work); struct gpio_vbus_mach_info *pdata = gpio_vbus->dev->platform_data; - int gpio; + int gpio, status; if (!gpio_vbus->phy.otg->gadget) return; @@ -108,7 +108,9 @@ static void gpio_vbus_work(struct work_struct *work) */ gpio = pdata->gpio_pullup; if (is_vbus_powered(pdata)) { + status = USB_EVENT_VBUS; gpio_vbus->phy.state = OTG_STATE_B_PERIPHERAL; + gpio_vbus->phy.last_event = status; usb_gadget_vbus_connect(gpio_vbus->phy.otg->gadget); /* drawing a "unit load" is *always* OK, except for OTG */ @@ -117,6 +119,9 @@ static void gpio_vbus_work(struct work_struct *work) /* optionally enable D+ pullup */ if (gpio_is_valid(gpio)) gpio_set_value(gpio, !pdata->gpio_pullup_inverted); + + atomic_notifier_call_chain(&gpio_vbus->phy.notifier, + status, gpio_vbus->phy.otg->gadget); } else { /* optionally disable D+ pullup */ if (gpio_is_valid(gpio)) @@ -125,7 +130,12 @@ static void gpio_vbus_work(struct work_struct *work) set_vbus_draw(gpio_vbus, 0); usb_gadget_vbus_disconnect(gpio_vbus->phy.otg->gadget); + status = USB_EVENT_NONE; gpio_vbus->phy.state = OTG_STATE_B_IDLE; + gpio_vbus->phy.last_event = status; + + atomic_notifier_call_chain(&gpio_vbus->phy.notifier, + status, gpio_vbus->phy.otg->gadget); } } @@ -287,6 +297,9 @@ static int __init gpio_vbus_probe(struct platform_device *pdev) irq, err); goto err_irq; } + + ATOMIC_INIT_NOTIFIER_HEAD(&gpio_vbus->phy.notifier); + INIT_WORK(&gpio_vbus->work, gpio_vbus_work); gpio_vbus->vbus_draw = regulator_get(&pdev->dev, "vbus_draw"); -- cgit v1.1 From c85dcdac5852295cf6822f5c4331a6ddab72581f Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 11 Apr 2012 16:09:10 -0400 Subject: USB: gadget: storage gadgets send wrong error code for unknown commands This patch (as1539) fixes a minor bug in the mass-storage gadget drivers. When an unknown command is received, the error code sent back is "Invalid Field in CDB" rather than "Invalid Command". This is because the bitmask of CDB bytes allowed to be nonzero is incorrect. When handling an unknown command, we don't care which command bytes are nonzero. All the bits in the mask should be set, not just eight of them. Signed-off-by: Alan Stern CC: CC: Signed-off-by: Felipe Balbi --- drivers/usb/gadget/f_mass_storage.c | 2 +- drivers/usb/gadget/file_storage.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/f_mass_storage.c b/drivers/usb/gadget/f_mass_storage.c index a371e96..cb8c162 100644 --- a/drivers/usb/gadget/f_mass_storage.c +++ b/drivers/usb/gadget/f_mass_storage.c @@ -2189,7 +2189,7 @@ unknown_cmnd: common->data_size_from_cmnd = 0; sprintf(unknown, "Unknown x%02x", common->cmnd[0]); reply = check_command(common, common->cmnd_size, - DATA_DIR_UNKNOWN, 0xff, 0, unknown); + DATA_DIR_UNKNOWN, ~0, 0, unknown); if (reply == 0) { common->curlun->sense_data = SS_INVALID_COMMAND; reply = -EINVAL; diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c index 4fac569..a896d73 100644 --- a/drivers/usb/gadget/file_storage.c +++ b/drivers/usb/gadget/file_storage.c @@ -2579,7 +2579,7 @@ static int do_scsi_command(struct fsg_dev *fsg) fsg->data_size_from_cmnd = 0; sprintf(unknown, "Unknown x%02x", fsg->cmnd[0]); if ((reply = check_command(fsg, fsg->cmnd_size, - DATA_DIR_UNKNOWN, 0xff, 0, unknown)) == 0) { + DATA_DIR_UNKNOWN, ~0, 0, unknown)) == 0) { fsg->curlun->sense_data = SS_INVALID_COMMAND; reply = -EINVAL; } -- cgit v1.1 From fc87e080e19fdeb1120ce274423fea7b2ec2f63e Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 18 Apr 2012 13:49:20 +0300 Subject: usb: musb: drop __deprecated flag Looks like we cannot live without that double_buffer_not_ok flag due to many HW bugs this MUSB core has. So, let's drop the __deprecated flag to avoid annoying compile warnings. Signed-off-by: Felipe Balbi --- drivers/usb/musb/musb_core.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/musb/musb_core.h b/drivers/usb/musb/musb_core.h index 93de517..f4a40f0 100644 --- a/drivers/usb/musb/musb_core.h +++ b/drivers/usb/musb/musb_core.h @@ -449,7 +449,7 @@ struct musb { * We added this flag to forcefully disable double * buffering until we get it working. */ - unsigned double_buffer_not_ok:1 __deprecated; + unsigned double_buffer_not_ok:1; struct musb_hdrc_config *config; -- cgit v1.1 From c67dd31c5cc745e72d033c0e7d4a2da67c90cd88 Mon Sep 17 00:00:00 2001 From: Julia Lawall Date: Mon, 16 Apr 2012 17:03:10 +0200 Subject: usb: musb: davinci.c: add missing unregister usb_nop_xceiv_unregister is needed on failure of usb_get_transceiver, as done in other error-handling code in the same function. Signed-off-by: Julia Lawall Signed-off-by: Felipe Balbi --- drivers/usb/musb/davinci.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c index 97ab975..768b4b5 100644 --- a/drivers/usb/musb/davinci.c +++ b/drivers/usb/musb/davinci.c @@ -386,7 +386,7 @@ static int davinci_musb_init(struct musb *musb) usb_nop_xceiv_register(); musb->xceiv = usb_get_transceiver(); if (!musb->xceiv) - return -ENODEV; + goto unregister; musb->mregs += DAVINCI_BASE_OFFSET; @@ -444,6 +444,7 @@ static int davinci_musb_init(struct musb *musb) fail: usb_put_transceiver(musb->xceiv); +unregister: usb_nop_xceiv_unregister(); return -ENODEV; } -- cgit v1.1 From 15b120d67019d691e4389372967332d74a80522a Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Wed, 18 Apr 2012 13:59:30 +0300 Subject: usb: gadget: dummy: do not call pullup() on udc_stop() pullup() is already called properly by udc-core.c and there's no need to call it from udc_stop(), in fact that will cause issues. Cc: stable@vger.kernel.org Reviewed-by: Alexander Shishkin Acked-by: Alan Stern Signed-off-by: Felipe Balbi --- drivers/usb/gadget/dummy_hcd.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index a6dfd21..170cbe8 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -927,7 +927,6 @@ static int dummy_udc_stop(struct usb_gadget *g, dum->driver = NULL; - dummy_pullup(&dum->gadget, 0); return 0; } -- cgit v1.1 From 6f6543f53f9ce136e01d7114bf6f0818ca54fb41 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Tue, 24 Apr 2012 11:29:42 +0200 Subject: usb gadget: uvc: uvc_request_data::length field must be signed The field is used to pass the UVC request data length, but can also be used to signal an error when setting it to a negative value. Switch from unsigned int to __s32. Reported-by: Fernandez Gonzalo Signed-off-by: Laurent Pinchart Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/uvc.h | 2 +- drivers/usb/gadget/uvc_v4l2.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/uvc.h b/drivers/usb/gadget/uvc.h index bc78c60..ca4e03a 100644 --- a/drivers/usb/gadget/uvc.h +++ b/drivers/usb/gadget/uvc.h @@ -28,7 +28,7 @@ struct uvc_request_data { - unsigned int length; + __s32 length; __u8 data[60]; }; diff --git a/drivers/usb/gadget/uvc_v4l2.c b/drivers/usb/gadget/uvc_v4l2.c index f6e083b..54d7ca5 100644 --- a/drivers/usb/gadget/uvc_v4l2.c +++ b/drivers/usb/gadget/uvc_v4l2.c @@ -39,7 +39,7 @@ uvc_send_response(struct uvc_device *uvc, struct uvc_request_data *data) if (data->length < 0) return usb_ep_set_halt(cdev->gadget->ep0); - req->length = min(uvc->event_length, data->length); + req->length = min_t(unsigned int, uvc->event_length, data->length); req->zero = data->length < uvc->event_length; req->dma = DMA_ADDR_INVALID; -- cgit v1.1 From 151b61284776be2d6f02d48c23c3625678960b97 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 24 Apr 2012 14:07:22 -0400 Subject: USB: EHCI: fix crash during suspend on ASUS computers This patch (as1545) fixes a problem affecting several ASUS computers: The machine crashes or corrupts memory when going into suspend if the ehci-hcd driver is bound to any controllers. Users have been forced to unbind or unload ehci-hcd before putting their systems to sleep. After extensive testing, it was determined that the machines don't like going into suspend when any EHCI controllers are in the PCI D3 power state. Presumably this is a firmware bug, but there's nothing we can do about it except to avoid putting the controllers in D3 during system sleep. The patch adds a new flag to indicate whether the problem is present, and avoids changing the controller's power state if the flag is set. Runtime suspend is unaffected; this matters only for system suspend. However as a side effect, the controller will not respond to remote wakeup requests while the system is asleep. Hence USB wakeup is not functional -- but of course, this is already true in the current state of affairs. This fixes Bugzilla #42728. Signed-off-by: Alan Stern Tested-by: Steven Rostedt Tested-by: Andrey Rahmatullin Tested-by: Oleksij Rempel (fishor) Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hcd-pci.c | 9 +++++++++ drivers/usb/host/ehci-pci.c | 8 ++++++++ 2 files changed, 17 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index 622b4a4..57ed9e4 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -493,6 +493,15 @@ static int hcd_pci_suspend_noirq(struct device *dev) pci_save_state(pci_dev); + /* + * Some systems crash if an EHCI controller is in D3 during + * a sleep transition. We have to leave such controllers in D0. + */ + if (hcd->broken_pci_sleep) { + dev_dbg(dev, "Staying in PCI D0\n"); + return retval; + } + /* If the root hub is dead rather than suspended, disallow remote * wakeup. usb_hc_died() should ensure that both hosts are marked as * dying, so we only need to check the primary roothub. diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index 01bb7241d..fe8dc06 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -144,6 +144,14 @@ static int ehci_pci_setup(struct usb_hcd *hcd) hcd->has_tt = 1; tdi_reset(ehci); } + if (pdev->subsystem_vendor == PCI_VENDOR_ID_ASUSTEK) { + /* EHCI #1 or #2 on 6 Series/C200 Series chipset */ + if (pdev->device == 0x1c26 || pdev->device == 0x1c2d) { + ehci_info(ehci, "broken D3 during system sleep on ASUS\n"); + hcd->broken_pci_sleep = 1; + device_set_wakeup_capable(&pdev->dev, false); + } + } break; case PCI_VENDOR_ID_TDI: if (pdev->device == PCI_DEVICE_ID_TDI_EHCI) { -- cgit v1.1 From 5c22837adca7c30b66121cf18ad3e160134268d4 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Thu, 26 Apr 2012 21:59:10 +0200 Subject: USB: cdc-wdm: fix race leading leading to memory corruption MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit This patch fixes a race whereby a pointer to a buffer would be overwritten while the buffer was in use leading to a double free and a memory leak. This causes crashes. This bug was introduced in 2.6.34 Signed-off-by: Oliver Neukum Tested-by: Bjørn Mork Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-wdm.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c index c6f6560..0bb2b32 100644 --- a/drivers/usb/class/cdc-wdm.c +++ b/drivers/usb/class/cdc-wdm.c @@ -157,8 +157,9 @@ static void wdm_out_callback(struct urb *urb) spin_lock(&desc->iuspin); desc->werr = urb->status; spin_unlock(&desc->iuspin); - clear_bit(WDM_IN_USE, &desc->flags); kfree(desc->outbuf); + desc->outbuf = NULL; + clear_bit(WDM_IN_USE, &desc->flags); wake_up(&desc->wait); } @@ -338,7 +339,7 @@ static ssize_t wdm_write if (we < 0) return -EIO; - desc->outbuf = buf = kmalloc(count, GFP_KERNEL); + buf = kmalloc(count, GFP_KERNEL); if (!buf) { rv = -ENOMEM; goto outnl; @@ -406,10 +407,12 @@ static ssize_t wdm_write req->wIndex = desc->inum; req->wLength = cpu_to_le16(count); set_bit(WDM_IN_USE, &desc->flags); + desc->outbuf = buf; rv = usb_submit_urb(desc->command, GFP_KERNEL); if (rv < 0) { kfree(buf); + desc->outbuf = NULL; clear_bit(WDM_IN_USE, &desc->flags); dev_err(&desc->intf->dev, "Tx URB error: %d\n", rv); } else { -- cgit v1.1 From 83a787a71e034244a9fd1d5988fe18f226341417 Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Fri, 27 Apr 2012 11:02:15 +0300 Subject: usb: gadget: udc-core: fix wrong call order commit 6d258a4 (usb: gadget: udc-core: stop UDC on device-initiated disconnect) introduced another case of asymmetric calls when issuing a device-initiated disconnect. Fix it. Reported-by: Ben Hutchings Signed-off-by: Felipe Balbi --- drivers/usb/gadget/udc-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c index 2fa9865..df1bd87 100644 --- a/drivers/usb/gadget/udc-core.c +++ b/drivers/usb/gadget/udc-core.c @@ -415,9 +415,9 @@ static ssize_t usb_udc_softconn_store(struct device *dev, usb_gadget_udc_start(udc->gadget, udc->driver); usb_gadget_connect(udc->gadget); } else if (sysfs_streq(buf, "disconnect")) { + usb_gadget_disconnect(udc->gadget); if (udc_is_newstyle(udc)) usb_gadget_udc_stop(udc->gadget, udc->driver); - usb_gadget_disconnect(udc->gadget); } else { dev_err(dev, "unsupported command '%s'\n", buf); return -EINVAL; -- cgit v1.1 From 320cd1e750f1bf3e47eb41209dcb2be07264cb76 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 26 Apr 2012 11:31:57 -0400 Subject: usb: gadget: udc-core: fix incompatibility with dummy-hcd This patch (as1548) fixes a recently-introduced incompatibility between the UDC core and the dummy-hcd driver. Commit 8ae8090c82eb407267001f75b3d256b3bd4ae691 (usb: gadget: udc-core: fix asymmetric calls in remove_driver) moved the usb_gadget_udc_stop() call in usb_gadget_remove_driver() below the usb_gadget_disconnect() call. As a result, usb_gadget_disconnect() gets called at a time when the gadget driver believes it has been unbound but dummy-hcd believes it has not. A nasty error ensues when dummy-hcd calls the gadget driver's disconnect method a second time. To fix the problem, this patch moves the gadget driver's unbind notification after the usb_gadget_disconnect() call. Now nothing happens between the two unbind notifications, so nothing goes wrong. Signed-off-by: Alan Stern Tested-by: Alexander Shishkin Signed-off-by: Felipe Balbi --- drivers/usb/gadget/udc-core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/udc-core.c b/drivers/usb/gadget/udc-core.c index df1bd87..e5e44f8 100644 --- a/drivers/usb/gadget/udc-core.c +++ b/drivers/usb/gadget/udc-core.c @@ -263,8 +263,8 @@ static void usb_gadget_remove_driver(struct usb_udc *udc) if (udc_is_newstyle(udc)) { udc->driver->disconnect(udc->gadget); - udc->driver->unbind(udc->gadget); usb_gadget_disconnect(udc->gadget); + udc->driver->unbind(udc->gadget); usb_gadget_udc_stop(udc->gadget, udc->driver); } else { usb_gadget_stop(udc->gadget, udc->driver); -- cgit v1.1 From ebf20de453042c066a289b90dd14d59de03dba2f Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Tue, 1 May 2012 11:28:49 -0400 Subject: EHCI: update PM methods in ehci-tegra.c This patch (as1547) rearranges the Power Management parts of the ehci-tegra driver to match the conventions used in other EHCI platform drivers. In particular, the controller should not be powered down by the root hub's suspend routine; the controller's power level should be managed by the controller's own PM methods. The end result of the patch is that the standard ehci_bus_suspend() and ehci_bus_resume() methods can be used instead of special-purpose routines. The driver now uses the standard dev_pm_ops methods instead of legacy power management. Since there is no supported wakeup mechanism for the controller, runtime suspend is forbidden by default (this can be overridden via sysfs, if desired). These adjustments are needed in order to make ehci-tegra compatible with recent changes to the USB core. The core now checks the root hub's status following bus suspend; if the controller is automatically powered down during bus suspend then the check will fail and the root hub will be resumed immediately. Doing the controller power-down in a separate method avoids this problem. Signed-off-by: Alan Stern Acked-by: Stephen Warren Tested-by: Stephen Warren Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-tegra.c | 375 ++++++++++++++++++++++-------------------- 1 file changed, 195 insertions(+), 180 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index 8618336..73f3525 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -24,6 +24,7 @@ #include #include #include +#include #include #include @@ -37,9 +38,7 @@ struct tegra_ehci_hcd { struct clk *emc_clk; struct usb_phy *transceiver; int host_resumed; - int bus_suspended; int port_resuming; - int power_down_on_bus_suspend; enum tegra_usb_phy_port_speed port_speed; }; @@ -273,120 +272,6 @@ static void tegra_ehci_restart(struct usb_hcd *hcd) up_write(&ehci_cf_port_reset_rwsem); } -static int tegra_usb_suspend(struct usb_hcd *hcd) -{ - struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller); - struct ehci_regs __iomem *hw = tegra->ehci->regs; - unsigned long flags; - - spin_lock_irqsave(&tegra->ehci->lock, flags); - - tegra->port_speed = (readl(&hw->port_status[0]) >> 26) & 0x3; - ehci_halt(tegra->ehci); - clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); - - spin_unlock_irqrestore(&tegra->ehci->lock, flags); - - tegra_ehci_power_down(hcd); - return 0; -} - -static int tegra_usb_resume(struct usb_hcd *hcd) -{ - struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller); - struct ehci_hcd *ehci = hcd_to_ehci(hcd); - struct ehci_regs __iomem *hw = ehci->regs; - unsigned long val; - - set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); - tegra_ehci_power_up(hcd); - - if (tegra->port_speed > TEGRA_USB_PHY_PORT_SPEED_HIGH) { - /* Wait for the phy to detect new devices - * before we restart the controller */ - msleep(10); - goto restart; - } - - /* Force the phy to keep data lines in suspend state */ - tegra_ehci_phy_restore_start(tegra->phy, tegra->port_speed); - - /* Enable host mode */ - tdi_reset(ehci); - - /* Enable Port Power */ - val = readl(&hw->port_status[0]); - val |= PORT_POWER; - writel(val, &hw->port_status[0]); - udelay(10); - - /* Check if the phy resume from LP0. When the phy resume from LP0 - * USB register will be reset. */ - if (!readl(&hw->async_next)) { - /* Program the field PTC based on the saved speed mode */ - val = readl(&hw->port_status[0]); - val &= ~PORT_TEST(~0); - if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_HIGH) - val |= PORT_TEST_FORCE; - else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_FULL) - val |= PORT_TEST(6); - else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_LOW) - val |= PORT_TEST(7); - writel(val, &hw->port_status[0]); - udelay(10); - - /* Disable test mode by setting PTC field to NORMAL_OP */ - val = readl(&hw->port_status[0]); - val &= ~PORT_TEST(~0); - writel(val, &hw->port_status[0]); - udelay(10); - } - - /* Poll until CCS is enabled */ - if (handshake(ehci, &hw->port_status[0], PORT_CONNECT, - PORT_CONNECT, 2000)) { - pr_err("%s: timeout waiting for PORT_CONNECT\n", __func__); - goto restart; - } - - /* Poll until PE is enabled */ - if (handshake(ehci, &hw->port_status[0], PORT_PE, - PORT_PE, 2000)) { - pr_err("%s: timeout waiting for USB_PORTSC1_PE\n", __func__); - goto restart; - } - - /* Clear the PCI status, to avoid an interrupt taken upon resume */ - val = readl(&hw->status); - val |= STS_PCD; - writel(val, &hw->status); - - /* Put controller in suspend mode by writing 1 to SUSP bit of PORTSC */ - val = readl(&hw->port_status[0]); - if ((val & PORT_POWER) && (val & PORT_PE)) { - val |= PORT_SUSPEND; - writel(val, &hw->port_status[0]); - - /* Wait until port suspend completes */ - if (handshake(ehci, &hw->port_status[0], PORT_SUSPEND, - PORT_SUSPEND, 1000)) { - pr_err("%s: timeout waiting for PORT_SUSPEND\n", - __func__); - goto restart; - } - } - - tegra_ehci_phy_restore_end(tegra->phy); - return 0; - -restart: - if (tegra->port_speed <= TEGRA_USB_PHY_PORT_SPEED_HIGH) - tegra_ehci_phy_restore_end(tegra->phy); - - tegra_ehci_restart(hcd); - return 0; -} - static void tegra_ehci_shutdown(struct usb_hcd *hcd) { struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller); @@ -434,36 +319,6 @@ static int tegra_ehci_setup(struct usb_hcd *hcd) return retval; } -#ifdef CONFIG_PM -static int tegra_ehci_bus_suspend(struct usb_hcd *hcd) -{ - struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller); - int error_status = 0; - - error_status = ehci_bus_suspend(hcd); - if (!error_status && tegra->power_down_on_bus_suspend) { - tegra_usb_suspend(hcd); - tegra->bus_suspended = 1; - } - - return error_status; -} - -static int tegra_ehci_bus_resume(struct usb_hcd *hcd) -{ - struct tegra_ehci_hcd *tegra = dev_get_drvdata(hcd->self.controller); - - if (tegra->bus_suspended && tegra->power_down_on_bus_suspend) { - tegra_usb_resume(hcd); - tegra->bus_suspended = 0; - } - - tegra_usb_phy_preresume(tegra->phy); - tegra->port_resuming = 1; - return ehci_bus_resume(hcd); -} -#endif - struct temp_buffer { void *kmalloc_ptr; void *old_xfer_buffer; @@ -574,8 +429,8 @@ static const struct hc_driver tegra_ehci_hc_driver = { .hub_control = tegra_ehci_hub_control, .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, #ifdef CONFIG_PM - .bus_suspend = tegra_ehci_bus_suspend, - .bus_resume = tegra_ehci_bus_resume, + .bus_suspend = ehci_bus_suspend, + .bus_resume = ehci_bus_resume, #endif .relinquish_port = ehci_relinquish_port, .port_handed_over = ehci_port_handed_over, @@ -608,6 +463,183 @@ static int setup_vbus_gpio(struct platform_device *pdev) return err; } +#ifdef CONFIG_PM + +static int controller_suspend(struct device *dev) +{ + struct tegra_ehci_hcd *tegra = + platform_get_drvdata(to_platform_device(dev)); + struct ehci_hcd *ehci = tegra->ehci; + struct usb_hcd *hcd = ehci_to_hcd(ehci); + struct ehci_regs __iomem *hw = ehci->regs; + unsigned long flags; + + if (time_before(jiffies, ehci->next_statechange)) + msleep(10); + + spin_lock_irqsave(&ehci->lock, flags); + + tegra->port_speed = (readl(&hw->port_status[0]) >> 26) & 0x3; + ehci_halt(ehci); + clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + + spin_unlock_irqrestore(&ehci->lock, flags); + + tegra_ehci_power_down(hcd); + return 0; +} + +static int controller_resume(struct device *dev) +{ + struct tegra_ehci_hcd *tegra = + platform_get_drvdata(to_platform_device(dev)); + struct ehci_hcd *ehci = tegra->ehci; + struct usb_hcd *hcd = ehci_to_hcd(ehci); + struct ehci_regs __iomem *hw = ehci->regs; + unsigned long val; + + set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags); + tegra_ehci_power_up(hcd); + + if (tegra->port_speed > TEGRA_USB_PHY_PORT_SPEED_HIGH) { + /* Wait for the phy to detect new devices + * before we restart the controller */ + msleep(10); + goto restart; + } + + /* Force the phy to keep data lines in suspend state */ + tegra_ehci_phy_restore_start(tegra->phy, tegra->port_speed); + + /* Enable host mode */ + tdi_reset(ehci); + + /* Enable Port Power */ + val = readl(&hw->port_status[0]); + val |= PORT_POWER; + writel(val, &hw->port_status[0]); + udelay(10); + + /* Check if the phy resume from LP0. When the phy resume from LP0 + * USB register will be reset. */ + if (!readl(&hw->async_next)) { + /* Program the field PTC based on the saved speed mode */ + val = readl(&hw->port_status[0]); + val &= ~PORT_TEST(~0); + if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_HIGH) + val |= PORT_TEST_FORCE; + else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_FULL) + val |= PORT_TEST(6); + else if (tegra->port_speed == TEGRA_USB_PHY_PORT_SPEED_LOW) + val |= PORT_TEST(7); + writel(val, &hw->port_status[0]); + udelay(10); + + /* Disable test mode by setting PTC field to NORMAL_OP */ + val = readl(&hw->port_status[0]); + val &= ~PORT_TEST(~0); + writel(val, &hw->port_status[0]); + udelay(10); + } + + /* Poll until CCS is enabled */ + if (handshake(ehci, &hw->port_status[0], PORT_CONNECT, + PORT_CONNECT, 2000)) { + pr_err("%s: timeout waiting for PORT_CONNECT\n", __func__); + goto restart; + } + + /* Poll until PE is enabled */ + if (handshake(ehci, &hw->port_status[0], PORT_PE, + PORT_PE, 2000)) { + pr_err("%s: timeout waiting for USB_PORTSC1_PE\n", __func__); + goto restart; + } + + /* Clear the PCI status, to avoid an interrupt taken upon resume */ + val = readl(&hw->status); + val |= STS_PCD; + writel(val, &hw->status); + + /* Put controller in suspend mode by writing 1 to SUSP bit of PORTSC */ + val = readl(&hw->port_status[0]); + if ((val & PORT_POWER) && (val & PORT_PE)) { + val |= PORT_SUSPEND; + writel(val, &hw->port_status[0]); + + /* Wait until port suspend completes */ + if (handshake(ehci, &hw->port_status[0], PORT_SUSPEND, + PORT_SUSPEND, 1000)) { + pr_err("%s: timeout waiting for PORT_SUSPEND\n", + __func__); + goto restart; + } + } + + tegra_ehci_phy_restore_end(tegra->phy); + goto done; + + restart: + if (tegra->port_speed <= TEGRA_USB_PHY_PORT_SPEED_HIGH) + tegra_ehci_phy_restore_end(tegra->phy); + + tegra_ehci_restart(hcd); + + done: + tegra_usb_phy_preresume(tegra->phy); + tegra->port_resuming = 1; + return 0; +} + +static int tegra_ehci_suspend(struct device *dev) +{ + struct tegra_ehci_hcd *tegra = + platform_get_drvdata(to_platform_device(dev)); + struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci); + int rc = 0; + + /* + * When system sleep is supported and USB controller wakeup is + * implemented: If the controller is runtime-suspended and the + * wakeup setting needs to be changed, call pm_runtime_resume(). + */ + if (HCD_HW_ACCESSIBLE(hcd)) + rc = controller_suspend(dev); + return rc; +} + +static int tegra_ehci_resume(struct device *dev) +{ + int rc; + + rc = controller_resume(dev); + if (rc == 0) { + pm_runtime_disable(dev); + pm_runtime_set_active(dev); + pm_runtime_enable(dev); + } + return rc; +} + +static int tegra_ehci_runtime_suspend(struct device *dev) +{ + return controller_suspend(dev); +} + +static int tegra_ehci_runtime_resume(struct device *dev) +{ + return controller_resume(dev); +} + +static const struct dev_pm_ops tegra_ehci_pm_ops = { + .suspend = tegra_ehci_suspend, + .resume = tegra_ehci_resume, + .runtime_suspend = tegra_ehci_runtime_suspend, + .runtime_resume = tegra_ehci_runtime_resume, +}; + +#endif + static u64 tegra_ehci_dma_mask = DMA_BIT_MASK(32); static int tegra_ehci_probe(struct platform_device *pdev) @@ -722,7 +754,6 @@ static int tegra_ehci_probe(struct platform_device *pdev) } tegra->host_resumed = 1; - tegra->power_down_on_bus_suspend = pdata->power_down_on_bus_suspend; tegra->ehci = hcd_to_ehci(hcd); irq = platform_get_irq(pdev, 0); @@ -746,6 +777,14 @@ static int tegra_ehci_probe(struct platform_device *pdev) goto fail; } + pm_runtime_set_active(&pdev->dev); + pm_runtime_get_noresume(&pdev->dev); + + /* Don't skip the pm_runtime_forbid call if wakeup isn't working */ + /* if (!pdata->power_down_on_bus_suspend) */ + pm_runtime_forbid(&pdev->dev); + pm_runtime_enable(&pdev->dev); + pm_runtime_put_sync(&pdev->dev); return err; fail: @@ -772,33 +811,6 @@ fail_hcd: return err; } -#ifdef CONFIG_PM -static int tegra_ehci_resume(struct platform_device *pdev) -{ - struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev); - struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci); - - if (tegra->bus_suspended) - return 0; - - return tegra_usb_resume(hcd); -} - -static int tegra_ehci_suspend(struct platform_device *pdev, pm_message_t state) -{ - struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev); - struct usb_hcd *hcd = ehci_to_hcd(tegra->ehci); - - if (tegra->bus_suspended) - return 0; - - if (time_before(jiffies, tegra->ehci->next_statechange)) - msleep(10); - - return tegra_usb_suspend(hcd); -} -#endif - static int tegra_ehci_remove(struct platform_device *pdev) { struct tegra_ehci_hcd *tegra = platform_get_drvdata(pdev); @@ -807,6 +819,10 @@ static int tegra_ehci_remove(struct platform_device *pdev) if (tegra == NULL || hcd == NULL) return -EINVAL; + pm_runtime_get_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); + pm_runtime_put_noidle(&pdev->dev); + #ifdef CONFIG_USB_OTG_UTILS if (tegra->transceiver) { otg_set_host(tegra->transceiver->otg, NULL); @@ -847,13 +863,12 @@ static struct of_device_id tegra_ehci_of_match[] __devinitdata = { static struct platform_driver tegra_ehci_driver = { .probe = tegra_ehci_probe, .remove = tegra_ehci_remove, -#ifdef CONFIG_PM - .suspend = tegra_ehci_suspend, - .resume = tegra_ehci_resume, -#endif .shutdown = tegra_ehci_hcd_shutdown, .driver = { .name = "tegra-ehci", .of_match_table = tegra_ehci_of_match, +#ifdef CONFIG_PM + .pm = &tegra_ehci_pm_ops, +#endif } }; -- cgit v1.1 From 04c235c92ce8474e9f2b358bd97f013a500385f2 Mon Sep 17 00:00:00 2001 From: Stephen Warren Date: Mon, 30 Apr 2012 17:24:10 -0600 Subject: USB: ehci-tegra: remove redundant gpio_set_value The immediately preceding gpio_direction_output() already set the value, so there's no need to repeat it. This also prevents gpio_set_value() from WARNing when the GPIO is sleepable (e.g. is on an I2C expander); the set direction API is always sleepable, but plain set_value isn't. Cc: # v3.3 Signed-off-by: Stephen Warren Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-tegra.c | 1 - 1 file changed, 1 deletion(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index 73f3525..f214a80 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -458,7 +458,6 @@ static int setup_vbus_gpio(struct platform_device *pdev) dev_err(&pdev->dev, "can't enable vbus\n"); return err; } - gpio_set_value(gpio, 1); return err; } -- cgit v1.1