From 92e6b2c675e1d247317ec41a078f49aaade7f716 Mon Sep 17 00:00:00 2001 From: Johan Hovold Date: Thu, 2 Mar 2017 12:51:19 +0100 Subject: USB: serial: add endpoint sanity check to core Allow drivers to specify a minimum number of endpoints per type, which USB serial core will verify after subdriver probe has returned (where the current alternate setting may have been changed). Signed-off-by: Johan Hovold --- drivers/usb/serial/usb-serial.c | 17 ++++++++++++----- 1 file changed, 12 insertions(+), 5 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index ccc729d..747dd41 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -848,21 +848,26 @@ static int usb_serial_probe(struct usb_interface *interface, if (epds->num_bulk_in == 0 || epds->num_bulk_out == 0) { dev_info(ddev, "PL-2303 hack: descriptors matched but endpoints did not\n"); retval = -ENODEV; - kfree(epds); - goto err_put_serial; + goto err_free_epds; } } /* END HORRIBLE HACK FOR PL2303 */ #endif - + if (epds->num_bulk_in < type->num_bulk_in || + epds->num_bulk_out < type->num_bulk_out || + epds->num_interrupt_in < type->num_interrupt_in || + epds->num_interrupt_out < type->num_interrupt_out) { + dev_err(ddev, "required endpoints missing\n"); + retval = -ENODEV; + goto err_free_epds; + } #ifdef CONFIG_USB_SERIAL_GENERIC if (type == &usb_serial_generic_device) { num_ports = epds->num_bulk_out; if (num_ports == 0) { dev_err(ddev, "Generic device with no bulk out, not allowed.\n"); retval = -EIO; - kfree(epds); - goto err_put_serial; + goto err_free_epds; } dev_info(ddev, "The \"generic\" usb-serial driver is only for testing and one-off prototypes.\n"); dev_info(ddev, "Tell linux-usb@vger.kernel.org to add your device to a proper driver.\n"); @@ -1085,6 +1090,8 @@ exit: probe_error: retval = -EIO; +err_free_epds: + kfree(epds); err_put_serial: usb_serial_put(serial); err_put_module: -- cgit v1.1