From 646d90e2b925578abef5c45853e0b166b6a450bf Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=C3=96mer=20Sezgin=20Ugurlu?= Date: Mon, 28 Jun 2010 19:01:58 +0300 Subject: USB: option: add support for 1da5:4518 Signed-off-by: Omer Sezgin Ugurlu Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index e280ad8..83d6ee4 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -302,6 +302,7 @@ static void option_instat_callback(struct urb *urb); #define QISDA_PRODUCT_H21_4512 0x4512 #define QISDA_PRODUCT_H21_4523 0x4523 #define QISDA_PRODUCT_H20_4515 0x4515 +#define QISDA_PRODUCT_H20_4518 0x4518 #define QISDA_PRODUCT_H20_4519 0x4519 /* TLAYTECH PRODUCTS */ @@ -852,6 +853,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4512) }, { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4523) }, { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4515) }, + { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4518) }, { USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H20_4519) }, { USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_G450) }, { USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_HSDPA_MINICARD ) }, /* Toshiba 3G HSDPA == Novatel Expedite EU870D MiniCard */ -- cgit v1.1 From 9d72c81d657340e54a260a3b621f4a9f5b33829c Mon Sep 17 00:00:00 2001 From: august huber Date: Mon, 28 Jun 2010 11:46:05 -0700 Subject: USB: Add PID for Sierra 250U to drivers/usb/serial/sierra.c Add VID/PID for Sierra Wireless 250U USB dongle to sierra.c Allows use of 3G radio only Signed-off-by: August Huber Cc: Elina Pasheva Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/sierra.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c index ef0bdb0..d47b56e 100644 --- a/drivers/usb/serial/sierra.c +++ b/drivers/usb/serial/sierra.c @@ -245,6 +245,7 @@ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x1199, 0x0021) }, /* Sierra Wireless AirCard 597E */ { USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */ { USB_DEVICE(0x1199, 0x0120) }, /* Sierra Wireless USB Dongle 595U */ + { USB_DEVICE(0x1199, 0x0301) }, /* Sierra Wireless USB Dongle 250U */ /* Sierra Wireless C597 */ { USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x0023, 0xFF, 0xFF, 0xFF) }, /* Sierra Wireless T598 */ -- cgit v1.1 From 83a4eae9aeed4a69e89e323a105e653ae06e7c1f Mon Sep 17 00:00:00 2001 From: Przemo Firszt Date: Mon, 28 Jun 2010 21:29:34 +0100 Subject: USB: Expose vendor-specific ACM channel on Nokia 5230 Nokia S60 phones expose two ACM channels. The first is a modem, the second is 'vendor-specific' but is treated as a serial device at the S60 end, so we want to expose it on Linux too. Signed-off-by: Przemo Firszt Signed-off-by: Greg Kroah-Hartman --- drivers/usb/class/cdc-acm.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/usb') diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 61d7550..162c95a 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1596,6 +1596,7 @@ static const struct usb_device_id acm_ids[] = { { NOKIA_PCSUITE_ACM_INFO(0x00e9), }, /* Nokia 5320 XpressMusic */ { NOKIA_PCSUITE_ACM_INFO(0x0108), }, /* Nokia 5320 XpressMusic 2G */ { NOKIA_PCSUITE_ACM_INFO(0x01f5), }, /* Nokia N97, RM-505 */ + { NOKIA_PCSUITE_ACM_INFO(0x02e3), }, /* Nokia 5230, RM-588 */ /* NOTE: non-Nokia COMM/ACM/0xff is likely MSFT RNDIS... NOT a modem! */ -- cgit v1.1 From 00c05aabf228d220b6189a314d181bad1a09718f Mon Sep 17 00:00:00 2001 From: Vladimir Zapolskiy Date: Tue, 29 Jun 2010 23:36:26 +0400 Subject: USB: s3c2410_udc: be aware of connected gadget driver To escape from data abort in interrupt handler, it is required to check for a connected gadget before delivering control requests. The change fixes the following panic, which occurs with no loaded gadget driver and input USB_REQ_GET_DESCRIPTOR request: Kernel panic - not syncing: Fatal exception in interrupt [] (unwind_backtrace+0x0/0xd8) from [] (panic+0x40/0x110) [] (panic+0x40/0x110) from [] (die+0x154/0x180) [] (die+0x154/0x180) from [] (__do_kernel_fault+0x64/0x74) [] (__do_kernel_fault+0x64/0x74) from [] (do_page_fault+0x1b8/0x1cc) [] (do_page_fault+0x1b8/0x1cc) from [] (do_DataAbort+0x34/0x94) [] (do_DataAbort+0x34/0x94) from [] (__dabt_svc+0x40/0x60) Exception stack(0xc0327ea8 to 0xc0327ef0) 7ea0: bf0026b0 c0327ef0 c0327ee4 00000000 bf002590 00000093 7ec0: 00000001 bf0026b0 bf002990 00000000 00000008 0000143d 00003f00 c0327ef0 7ee0: bf001364 bf001360 20000093 ffffffff [] (__dabt_svc+0x40/0x60) from [] (s3c2410_udc_irq+0x5b8/0x778 [s3c2410_udc]) [] (s3c2410_udc_irq+0x5b8/0x778 [s3c2410_udc]) from [] (handle_IRQ_event+0x3c/0x104) [] (handle_IRQ_event+0x3c/0x104) from [] (handle_edge_irq+0x12c/0x164) [] (handle_edge_irq+0x12c/0x164) from [] (asm_do_IRQ+0x68/0x88) [] (asm_do_IRQ+0x68/0x88) from [] (__irq_svc+0x24/0xa0) Signed-off-by: Vladimir Zapolskiy Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/s3c2410_udc.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c index e724a05..ea2b3c7 100644 --- a/drivers/usb/gadget/s3c2410_udc.c +++ b/drivers/usb/gadget/s3c2410_udc.c @@ -735,6 +735,10 @@ static void s3c2410_udc_handle_ep0_idle(struct s3c2410_udc *dev, else dev->ep0state = EP0_OUT_DATA_PHASE; + if (!dev->driver) + return; + + /* deliver the request to the gadget driver */ ret = dev->driver->setup(&dev->gadget, crq); if (ret < 0) { if (dev->req_config) { -- cgit v1.1 From 77dbd74e16b566e9d5eeb4be18ae3ee7d5902bd3 Mon Sep 17 00:00:00 2001 From: Colin Leitner Date: Thu, 1 Jul 2010 10:49:55 +0200 Subject: USB: ftdi_sio: support for Signalyzer tools based on FTDI chips ftdi_sio: support for Signalyzer tools based on FTDI chips This patch adds support for the Xverve Signalyzers. Signed-off-by: Colin Leitner Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 8 ++++++++ drivers/usb/serial/ftdi_sio_ids.h | 9 +++++++++ 2 files changed, 17 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index da7e334..1d2a27b 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -737,6 +737,14 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, MJSG_SR_RADIO_PID) }, { USB_DEVICE(FTDI_VID, MJSG_HD_RADIO_PID) }, { USB_DEVICE(FTDI_VID, MJSG_XM_RADIO_PID) }, + { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_ST_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SLITE_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH2_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, + { USB_DEVICE(FTDI_VID, XVERVE_SIGNALYZER_SH4_PID), + .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index bbc159a..9c5d9cb 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -1017,3 +1017,12 @@ #define MJSG_SR_RADIO_PID 0x9379 #define MJSG_XM_RADIO_PID 0x937A #define MJSG_HD_RADIO_PID 0x937C + +/* + * Xverve Signalyzer tools (http://www.signalyzer.com/) + */ +#define XVERVE_SIGNALYZER_ST_PID 0xBCA0 +#define XVERVE_SIGNALYZER_SLITE_PID 0xBCA1 +#define XVERVE_SIGNALYZER_SH2_PID 0xBCA2 +#define XVERVE_SIGNALYZER_SH4_PID 0xBCA4 + -- cgit v1.1 From bec25b891e08fe364f329b045a3566422ca372ec Mon Sep 17 00:00:00 2001 From: Andrew Bird Date: Thu, 1 Jul 2010 20:50:07 +0100 Subject: USB: New PIDs for Qualcomm gobi 2000 (qcserial) Adds support for the Generic Qualcomm Gobi 2000 WWAN UMTS/CDMA modem Signed-off-by: Andrew Bird Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/qcserial.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c index 93d72eb..cde67ca 100644 --- a/drivers/usb/serial/qcserial.c +++ b/drivers/usb/serial/qcserial.c @@ -51,6 +51,8 @@ static const struct usb_device_id id_table[] = { {USB_DEVICE(0x1f45, 0x0001)}, /* Unknown Gobi QDL device */ {USB_DEVICE(0x413c, 0x8185)}, /* Dell Gobi 2000 QDL device (N0218, VU936) */ {USB_DEVICE(0x413c, 0x8186)}, /* Dell Gobi 2000 Modem device (N0218, VU936) */ + {USB_DEVICE(0x05c6, 0x9208)}, /* Generic Gobi 2000 QDL device */ + {USB_DEVICE(0x05c6, 0x920b)}, /* Generic Gobi 2000 Modem device */ {USB_DEVICE(0x05c6, 0x9224)}, /* Sony Gobi 2000 QDL device (N0279, VU730) */ {USB_DEVICE(0x05c6, 0x9225)}, /* Sony Gobi 2000 Modem device (N0279, VU730) */ {USB_DEVICE(0x05c6, 0x9244)}, /* Samsung Gobi 2000 QDL device (VL176) */ -- cgit v1.1 From 7595931c986f50b1e197ce7b881563e36a7d041e Mon Sep 17 00:00:00 2001 From: Dennis Jansen Date: Fri, 9 Jul 2010 22:03:53 +0200 Subject: USB: option: Add support for AMOI Skypephone S2 usbserial: Add AMOI Skypephone S2 support. This patch adds support for the AMOI Skypephone S2 to the usbserial module. Tested-by: Dennis Jansen Signed-off-by: Dennis Jansen Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 83d6ee4..5cd30e43 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -206,6 +206,7 @@ static void option_instat_callback(struct urb *urb); #define AMOI_PRODUCT_H01 0x0800 #define AMOI_PRODUCT_H01A 0x7002 #define AMOI_PRODUCT_H02 0x0802 +#define AMOI_PRODUCT_SKYPEPHONE_S2 0x0407 #define DELL_VENDOR_ID 0x413C @@ -517,6 +518,7 @@ static const struct usb_device_id option_ids[] = { { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01) }, { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H01A) }, { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_H02) }, + { USB_DEVICE(AMOI_VENDOR_ID, AMOI_PRODUCT_SKYPEPHONE_S2) }, { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5700_MINICARD) }, /* Dell Wireless 5700 Mobile Broadband CDMA/EVDO Mini-Card == Novatel Expedite EV620 CDMA/EV-DO */ { USB_DEVICE(DELL_VENDOR_ID, DELL_PRODUCT_5500_MINICARD) }, /* Dell Wireless 5500 Mobile Broadband HSDPA Mini-Card == Novatel Expedite EU740 HSDPA/3G */ -- cgit v1.1 From d1dc908a251c8cd87c1a1ad4f2c4a40cdbd8286c Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Fri, 9 Jul 2010 17:08:38 +0200 Subject: USB: xHCI: Fix another bug in link TRB activation change. Commit 6c12db90f19727c76990e7f4801c67a148b30111 also seems to have introduced a bug that is triggered when the command ring is about to wrap. The inc_enq() function will not have moved the enqueue pointer past the link TRB. It is supposed to be moved past the link TRB in prepare_ring(), which should be called before a TD is enqueued. However, the queue_command() function never calls the prepare_ring() function because prepare_ring() is only supposed to be used for endpoint rings. That means the enqueue pointer will not be moved past the link TRB, and will get overwritten. The fix is to make queue_command() call prepare_ring() with a fake endpoint status (set to running). Then the enqueue pointer will get moved past the link TRB. Signed-off-by: Sarah Sharp Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-ring.c | 11 +++++++---- 1 file changed, 7 insertions(+), 4 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 94e6934..bfc99a9 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -2380,16 +2380,19 @@ static int queue_command(struct xhci_hcd *xhci, u32 field1, u32 field2, u32 field3, u32 field4, bool command_must_succeed) { int reserved_trbs = xhci->cmd_ring_reserved_trbs; + int ret; + if (!command_must_succeed) reserved_trbs++; - if (!room_on_ring(xhci, xhci->cmd_ring, reserved_trbs)) { - if (!in_interrupt()) - xhci_err(xhci, "ERR: No room for command on command ring\n"); + ret = prepare_ring(xhci, xhci->cmd_ring, EP_STATE_RUNNING, + reserved_trbs, GFP_ATOMIC); + if (ret < 0) { + xhci_err(xhci, "ERR: No room for command on command ring\n"); if (command_must_succeed) xhci_err(xhci, "ERR: Reserved TRB counting for " "unfailable commands failed.\n"); - return -ENOMEM; + return ret; } queue_trb(xhci, xhci->cmd_ring, false, false, field1, field2, field3, field4 | xhci->cmd_ring->cycle_state); -- cgit v1.1 From 809cd1cb80d7dffe75dc94bc94ef2aab3dadc86a Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Fri, 9 Jul 2010 17:08:48 +0200 Subject: USB: Fix USB3.0 Port Speed Downgrade after port reset Without this fix, a USB 3.0 port is downgraded to full speed after a port reset of a configured device. The USB 3.0 terminations will be disabled permanently, and USB 3.0 devices will always enumerate as full speed devices, until the host controller is unplugged (if it is an ExpressCard) or the computer is rebooted. Fajun Chen traced this traced the speed downgrade issue to the port reset and the interpretation of port status in USB hub driver code. The hub code was not testing for the port being a SuperSpeed port, and it fell through to the else case of Full Speed. The following patch adds SuperSpeed mapping from the port status, and fixes the speed downgrade issue. Reported-by: Fajun Chen Signed-off-by: Sarah Sharp Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/hub.c | 2 ++ 1 file changed, 2 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 83e7bbb..70cccc7 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -1982,6 +1982,8 @@ static int hub_port_wait_reset(struct usb_hub *hub, int port1, (portstatus & USB_PORT_STAT_ENABLE)) { if (hub_is_wusb(hub)) udev->speed = USB_SPEED_WIRELESS; + else if (portstatus & USB_PORT_STAT_SUPER_SPEED) + udev->speed = USB_SPEED_SUPER; else if (portstatus & USB_PORT_STAT_HIGH_SPEED) udev->speed = USB_SPEED_HIGH; else if (portstatus & USB_PORT_STAT_LOW_SPEED) -- cgit v1.1 From 2d1ee5904bb51ea33c6a6f4bec6b6a243e2432a8 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Fri, 9 Jul 2010 17:08:54 +0200 Subject: USB: xhci: Set EP0 dequeue ptr after reset of configured device. When a configured device is reset, the control endpoint's ring is reused. If control transfers to the device were issued before the device is reset, the dequeue pointer will be somewhere in the middle of the ring. If the device is then issued an address with the set address command, the xHCI driver must provide a valid input context for control endpoint zero. The original code would give the hardware the original input context, which had a dequeue pointer set to the top of the ring. This would cause the host to re-execute any control transfers until it reached the ring's enqueue pointer. When issuing a set address command for a device that has just been configured and then reset, use the control endpoint's enqueue pointer as the hardware's dequeue pointer. Assumption: All control transfers will be completed or cancelled before the set address command is issued to the device. If there are any outstanding control transfers, this code will not work. Signed-off-by: Sarah Sharp Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-mem.c | 21 +++++++++++++++++++++ drivers/usb/host/xhci.c | 2 ++ drivers/usb/host/xhci.h | 2 ++ 3 files changed, 25 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index fd9e03a..8cc824b 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -835,6 +835,27 @@ fail: return 0; } +void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci, + struct usb_device *udev) +{ + struct xhci_virt_device *virt_dev; + struct xhci_ep_ctx *ep0_ctx; + struct xhci_ring *ep_ring; + + virt_dev = xhci->devs[udev->slot_id]; + ep0_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, 0); + ep_ring = virt_dev->eps[0].ring; + /* + * FIXME we don't keep track of the dequeue pointer very well after a + * Set TR dequeue pointer, so we're setting the dequeue pointer of the + * host to our enqueue pointer. This should only be called after a + * configured device has reset, so all control transfers should have + * been completed or cancelled before the reset. + */ + ep0_ctx->deq = xhci_trb_virt_to_dma(ep_ring->enq_seg, ep_ring->enqueue); + ep0_ctx->deq |= ep_ring->cycle_state; +} + /* Setup an xHCI virtual device for a Set Address command */ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev) { diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 27345cd..3998f72 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -2134,6 +2134,8 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev) /* If this is a Set Address to an unconfigured device, setup ep 0 */ if (!udev->config) xhci_setup_addressable_virt_dev(xhci, udev); + else + xhci_copy_ep0_dequeue_into_input_ctx(xhci, udev); /* Otherwise, assume the core has the device configured how it wants */ xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id); xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 8b4b7d3..6c7e343 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1292,6 +1292,8 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags); void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id); int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, struct usb_device *udev, gfp_t flags); int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev); +void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci, + struct usb_device *udev); unsigned int xhci_get_endpoint_index(struct usb_endpoint_descriptor *desc); unsigned int xhci_get_endpoint_flag(struct usb_endpoint_descriptor *desc); unsigned int xhci_get_endpoint_flag_from_index(unsigned int ep_index); -- cgit v1.1 From 47f19c0eedb377ad1ee8114f464d001ec5f96a69 Mon Sep 17 00:00:00 2001 From: Paul Mortier Date: Fri, 9 Jul 2010 13:18:50 +0100 Subject: USB: adds Artisman USB dongle to list of quirky devices When an attempt is made to read the interface strings of the Artisman Watchdog USB dongle (idVendor:idProduct 04b4:0526) an error is written to the dmesg log (uhci_result_common: failed with status 440000) and the dongle resets itself, resulting in a disconnect/reconnect loop. Adding the dongle to the list of devices in quirks.c, with the same quirk Alan Stern's previous patch for the Saitek Cyborg Gold 3D joystick, stops the device from resetting and allows it to be used with no problems. Signed-off-by: Paul Mortier Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index f22d03d..ba2620c 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -41,6 +41,10 @@ static const struct usb_device_id usb_quirk_list[] = { /* Philips PSC805 audio device */ { USB_DEVICE(0x0471, 0x0155), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Artisman Watchdog Dongle */ + { USB_DEVICE(0x04b4, 0x0526), .driver_info = + USB_QUIRK_CONFIG_INTF_STRINGS }, + /* Roland SC-8820 */ { USB_DEVICE(0x0582, 0x0007), .driver_info = USB_QUIRK_RESET_RESUME }, -- cgit v1.1 From 20a12f007feee1cfa761b431047271d1141d8031 Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Fri, 16 Jul 2010 17:36:26 +0200 Subject: USB: sisusbvga: Fix for USB 3.0 Super speed is also fast enough to let sisusbvga operate. Therefor expand the checks. Signed-off-by: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/misc/sisusbvga/sisusb.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c index 30d9303..d25814c 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.c +++ b/drivers/usb/misc/sisusbvga/sisusb.c @@ -2436,7 +2436,8 @@ sisusb_open(struct inode *inode, struct file *file) } if (!sisusb->devinit) { - if (sisusb->sisusb_dev->speed == USB_SPEED_HIGH) { + if (sisusb->sisusb_dev->speed == USB_SPEED_HIGH || + sisusb->sisusb_dev->speed == USB_SPEED_SUPER) { if (sisusb_init_gfxdevice(sisusb, 0)) { mutex_unlock(&sisusb->lock); dev_err(&sisusb->sisusb_dev->dev, "Failed to initialize device\n"); @@ -3166,7 +3167,7 @@ static int sisusb_probe(struct usb_interface *intf, sisusb->present = 1; - if (dev->speed == USB_SPEED_HIGH) { + if (dev->speed == USB_SPEED_HIGH || dev->speed == USB_SPEED_SUPER) { int initscreen = 1; #ifdef INCL_SISUSB_CON if (sisusb_first_vc > 0 && -- cgit v1.1 From c30c791c946a14a03e87819eced562ed28711961 Mon Sep 17 00:00:00 2001 From: Sarah Sharp Date: Sat, 10 Jul 2010 15:48:01 +0200 Subject: USB: xhci: Set Mult field in endpoint context correctly. The bmAttributes field of the SuperSpeed Endpoint Companion Descriptor has different meanings, depending on the endpoint type. If the endpoint is isochronous, the bmAttributes field is the maximum number of packets within a service interval that this endpoint supports. If the endpoint is bulk, it's the number of stream IDs this endpoint supports. Only set the Mult field of the xHCI endpoint context using the bmAttributes field if the endpoint is isochronous, and the device is a SuperSpeed device. Signed-off-by: Sarah Sharp Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/xhci-mem.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index 8cc824b..2eb658d 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -1023,7 +1023,7 @@ static inline unsigned int xhci_get_endpoint_interval(struct usb_device *udev, return EP_INTERVAL(interval); } -/* The "Mult" field in the endpoint context is only set for SuperSpeed devices. +/* The "Mult" field in the endpoint context is only set for SuperSpeed isoc eps. * High speed endpoint descriptors can define "the number of additional * transaction opportunities per microframe", but that goes in the Max Burst * endpoint context field. @@ -1031,7 +1031,8 @@ static inline unsigned int xhci_get_endpoint_interval(struct usb_device *udev, static inline u32 xhci_get_endpoint_mult(struct usb_device *udev, struct usb_host_endpoint *ep) { - if (udev->speed != USB_SPEED_SUPER) + if (udev->speed != USB_SPEED_SUPER || + !usb_endpoint_xfer_isoc(&ep->desc)) return 0; return ep->ss_ep_comp.bmAttributes; } -- cgit v1.1 From c222fb2efaf1a421f5bf74403df40a9384ccf516 Mon Sep 17 00:00:00 2001 From: Bob Copeland Date: Mon, 12 Jul 2010 11:18:18 -0400 Subject: USB: usb-storage: fix initializations of urb fields Commit 0ede76fcec5415ef82a423a95120286895822e2d, "USB: remove uses of URB_NO_SETUP_DMA_MAP" introduced a regression by inadvertantly removing initialization of the transfer flags. This caused initialization failures in the ums-karma driver. Fix the regression by zeroing it. While at it, as Alan Stern points out, the initializers for actual_length and status are handled by the core and error_count only matters for isochronous urbs, so they don't need to be set here. Remove them. Signed-off-by: Bob Copeland Acked-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/storage/transport.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c index 4471642..64ec073 100644 --- a/drivers/usb/storage/transport.c +++ b/drivers/usb/storage/transport.c @@ -139,9 +139,7 @@ static int usb_stor_msg_common(struct us_data *us, int timeout) /* fill the common fields in the URB */ us->current_urb->context = &urb_done; - us->current_urb->actual_length = 0; - us->current_urb->error_count = 0; - us->current_urb->status = 0; + us->current_urb->transfer_flags = 0; /* we assume that if transfer_buffer isn't us->iobuf then it * hasn't been mapped for DMA. Yes, this is clunky, but it's -- cgit v1.1 From 63ab71deae67b031045bb28bf8cff45180089f8f Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Wed, 14 Jul 2010 18:26:22 +0200 Subject: USB: add quirk for Broadcom BT dongle This device needs to be reset when resuming Signed-off-by: Oliver Neukum Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/core/quirks.c | 3 +++ 1 file changed, 3 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index ba2620c..db99c08 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -68,6 +68,9 @@ static const struct usb_device_id usb_quirk_list[] = { /* X-Rite/Gretag-Macbeth Eye-One Pro display colorimeter */ { USB_DEVICE(0x0971, 0x2000), .driver_info = USB_QUIRK_NO_SET_INTF }, + /* Broadcom BCM92035DGROM BT dongle */ + { USB_DEVICE(0x0a5c, 0x2021), .driver_info = USB_QUIRK_RESET_RESUME }, + /* Action Semiconductor flash disk */ { USB_DEVICE(0x10d6, 0x2200), .driver_info = USB_QUIRK_STRING_FETCH_255 }, -- cgit v1.1 From fcc6cb789c77ffee31710eec64efeb25f2124f7a Mon Sep 17 00:00:00 2001 From: Corey Minyard Date: Wed, 21 Jul 2010 08:39:22 -0500 Subject: USB: FTDI: Add support for the RT System VX-7 radio programming cable RT Systems has put out bunch of ham radio cables based on the FT232RL chip. Each cable type has a unique PID, this adds one for the Yaesu VX-7 radios. Signed-off-by: Corey Minyard Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ftdi_sio.c | 1 + drivers/usb/serial/ftdi_sio_ids.h | 6 ++++++ 2 files changed, 7 insertions(+) (limited to 'drivers/usb') diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index 1d2a27b..e298dc4 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -691,6 +691,7 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(FTDI_VID, FTDI_NDI_AURORA_SCU_PID), .driver_info = (kernel_ulong_t)&ftdi_NDI_device_quirk }, { USB_DEVICE(TELLDUS_VID, TELLDUS_TELLSTICK_PID) }, + { USB_DEVICE(RTSYSTEMS_VID, RTSYSTEMS_SERIAL_VX7_PID) }, { USB_DEVICE(FTDI_VID, FTDI_MAXSTREAM_PID) }, { USB_DEVICE(FTDI_VID, FTDI_PHI_FISCO_PID) }, { USB_DEVICE(TML_VID, TML_USB_SERIAL_PID) }, diff --git a/drivers/usb/serial/ftdi_sio_ids.h b/drivers/usb/serial/ftdi_sio_ids.h index 9c5d9cb..d01946d 100644 --- a/drivers/usb/serial/ftdi_sio_ids.h +++ b/drivers/usb/serial/ftdi_sio_ids.h @@ -696,6 +696,12 @@ #define TELLDUS_TELLSTICK_PID 0x0C30 /* RF control dongle 433 MHz using FT232RL */ /* + * RT Systems programming cables for various ham radios + */ +#define RTSYSTEMS_VID 0x2100 /* Vendor ID */ +#define RTSYSTEMS_SERIAL_VX7_PID 0x9e52 /* Serial converter for VX-7 Radios using FT232RL */ + +/* * Bayer Ascensia Contour blood glucose meter USB-converter cable. * http://winglucofacts.com/cables/ */ -- cgit v1.1 From 2b795ea00c2bbb077a1199a4d729c8ac03a6bded Mon Sep 17 00:00:00 2001 From: Felipe Balbi Date: Mon, 5 Jul 2010 12:12:01 +0300 Subject: USB: musb: tusb6010: fix compile error with n8x0_defconfig Drop the unnecessary empty stubs in tusb6010.c and avoid a compile error when building kernel for n8x0. Signed-off-by: Felipe Balbi Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/usb/musb/tusb6010.c | 13 ------------- 1 file changed, 13 deletions(-) (limited to 'drivers/usb') diff --git a/drivers/usb/musb/tusb6010.c b/drivers/usb/musb/tusb6010.c index 05c077f..3c48e77 100644 --- a/drivers/usb/musb/tusb6010.c +++ b/drivers/usb/musb/tusb6010.c @@ -29,19 +29,6 @@ static void tusb_source_power(struct musb *musb, int is_on); #define TUSB_REV_MAJOR(reg_val) ((reg_val >> 4) & 0xf) #define TUSB_REV_MINOR(reg_val) (reg_val & 0xf) -#ifdef CONFIG_PM -/* REVISIT: These should be only needed if somebody implements off idle */ -void musb_platform_save_context(struct musb *musb, - struct musb_context_registers *musb_context) -{ -} - -void musb_platform_restore_context(struct musb *musb, - struct musb_context_registers *musb_context) -{ -} -#endif - /* * Checks the revision. We need to use the DMA register as 3.0 does not * have correct versions for TUSB_PRCM_REV or TUSB_INT_CTRL_REV. -- cgit v1.1