From 06dd881f59b3c07a430cdcbef2197f9b6dc79ae8 Mon Sep 17 00:00:00 2001
From: Jason Wessel <jason.wessel@windriver.com>
Date: Mon, 8 Sep 2008 14:53:37 +0100
Subject: usb: fix null deferences in low level usb serial

The hw interface drivers for the usb serial devices deference the tty
structure to set up the parameters for the initial console.  The tty
structure should be passed as a parameter to the set_termios() call.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/console.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index 7b74238..e980766 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -161,7 +161,7 @@ static int usb_console_setup(struct console *co, char *options)
 		if (serial->type->set_termios) {
 			termios->c_cflag = cflag;
 			tty_termios_encode_baud_rate(termios, baud, baud);
-			serial->type->set_termios(NULL, port, &dummy);
+			serial->type->set_termios(tty, port, &dummy);
 
 			port->port.tty = NULL;
 			kfree(termios);
-- 
cgit v1.1


From 73b2c2057579314c4fea1a37e35a501fbb8b9916 Mon Sep 17 00:00:00 2001
From: Kevin Lloyd <klloyd@sierrawireless.com>
Date: Mon, 25 Aug 2008 19:20:40 -0700
Subject: USB Serial: Sierra: Device addition & version rev

This patch adds devices to the sierra driver and rev's the driver version.

Signed-off-by: Kevin Lloyd <klloyd@sierrawireless.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/serial/sierra.c | 9 +++++----
 1 file changed, 5 insertions(+), 4 deletions(-)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 7060337..396f099 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -14,7 +14,7 @@
   Whom based his on the Keyspan driver by Hugh Blemings <hugh@blemings.org>
 */
 
-#define DRIVER_VERSION "v.1.2.13a"
+#define DRIVER_VERSION "v.1.3.2"
 #define DRIVER_AUTHOR "Kevin Lloyd <klloyd@sierrawireless.com>"
 #define DRIVER_DESC "USB Driver for Sierra Wireless USB modems"
 
@@ -30,9 +30,6 @@
 
 #define SWIMS_USB_REQUEST_SetPower	0x00
 #define SWIMS_USB_REQUEST_SetNmea	0x07
-#define SWIMS_USB_REQUEST_SetMode	0x0B
-#define SWIMS_USB_REQUEST_GetSwocInfo	0x0A
-#define SWIMS_SET_MODE_Modem		0x0001
 
 /* per port private data */
 #define N_IN_URB	4
@@ -175,6 +172,8 @@ static struct usb_device_id id_table [] = {
 	 /* Sierra Wireless Device */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x0025, 0xFF, 0xFF, 0xFF) },
 	{ USB_DEVICE(0x1199, 0x0026) }, /* Sierra Wireless Device */
+	{ USB_DEVICE(0x1199, 0x0027) }, /* Sierra Wireless Device */
+	{ USB_DEVICE(0x1199, 0x0028) }, /* Sierra Wireless Device */
 
 	{ USB_DEVICE(0x1199, 0x6802) },	/* Sierra Wireless MC8755 */
 	{ USB_DEVICE(0x1199, 0x6804) },	/* Sierra Wireless MC8755 */
@@ -204,6 +203,8 @@ static struct usb_device_id id_table [] = {
 	/* Sierra Wireless Device */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6890, 0xFF, 0xFF, 0xFF)},
 	/* Sierra Wireless Device */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6891, 0xFF, 0xFF, 0xFF)},
+	/* Sierra Wireless Device */
 	{ USB_DEVICE_AND_INTERFACE_INFO(0x1199, 0x6892, 0xFF, 0xFF, 0xFF)},
 
 	{ USB_DEVICE(0x1199, 0x0112) }, /* Sierra Wireless AirCard 580 */
-- 
cgit v1.1


From f8834f1febb8f56cdcfeb35485e0cc7a8d547818 Mon Sep 17 00:00:00 2001
From: Tony Murray <murraytony@gmail.com>
Date: Fri, 22 Aug 2008 17:30:44 -0500
Subject: USB: Correct Sierra Wireless USB EVDO Modem Device ID

I was trying to figure out why my device wasn't supported by the
drivers/usb/serial/sierra.c driver, while looking throught the device
IDs I spotted what I believe to be a typo in the device IDs.  Please
apply the following patch

If you look down further, there is another HP wireless broadband card,
which has a vendor ID of 03f0, like my device.  Below is my "lsusb -v
-d 03f0:1b1d".

Bus 001 Device 005: ID 03f0:1b1d Hewlett-Packard
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               1.10
  bDeviceClass            0 (Defined at Interface level)
  bDeviceSubClass         0
  bDeviceProtocol         0
  bMaxPacketSize0        64
  idVendor           0x03f0 Hewlett-Packard
  idProduct          0x1b1d
  bcdDevice            0.01
  iManufacturer           1 HP
  iProduct                2 HP ev2200 1xEV-DO Broadband Wireless Module
  iSerial                 0
  bNumConfigurations      1
  Configuration Descriptor:
    bLength                 9
    bDescriptorType         2
    wTotalLength           67
    bNumInterfaces          1
    bConfigurationValue     1
    iConfiguration          0
    bmAttributes         0xe0
      Self Powered
      Remote Wakeup
    MaxPower                0mA
    Interface Descriptor:
      bLength                 9
      bDescriptorType         4
      bInterfaceNumber        0
      bAlternateSetting       0
      bNumEndpoints           7
      bInterfaceClass       255 Vendor Specific Class
      bInterfaceSubClass    255 Vendor Specific Subclass
      bInterfaceProtocol    255 Vendor Specific Protocol
      iInterface              3 Data Interface
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x81  EP 1 IN
        bmAttributes            3
          Transfer Type            Interrupt
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0010  1x 16 bytes
        bInterval             128
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x82  EP 2 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x02  EP 2 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x84  EP 4 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x04  EP 4 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x85  EP 5 IN
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
      Endpoint Descriptor:
        bLength                 7
        bDescriptorType         5
        bEndpointAddress     0x05  EP 5 OUT
        bmAttributes            2
          Transfer Type            Bulk
          Synch Type               None
          Usage Type               Data
        wMaxPacketSize     0x0040  1x 64 bytes
        bInterval               0
Device Status:     0x0000
  (Bus Powered)

From: Tony Murray <murraytony@gmail.com>
Cc: Kevin Lloyd <klloyd@sierrawireless.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/serial/sierra.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 396f099..eb87640 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -160,7 +160,7 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x1199, 0x0017) },	/* Sierra Wireless EM5625 */
 	{ USB_DEVICE(0x1199, 0x0018) },	/* Sierra Wireless MC5720 */
 	{ USB_DEVICE(0x1199, 0x0218) },	/* Sierra Wireless MC5720 */
-	{ USB_DEVICE(0x0f30, 0x1b1d) },	/* Sierra Wireless MC5720 */
+	{ USB_DEVICE(0x03f0, 0x1b1d) }, /* HP ev2200 a.k.a MC5720 */
 	{ USB_DEVICE(0x1199, 0x0020) },	/* Sierra Wireless MC5725 */
 	{ USB_DEVICE(0x1199, 0x0024) },	/* Sierra Wireless MC5727 */
 	{ USB_DEVICE(0x1199, 0x0220) },	/* Sierra Wireless MC5725 */
-- 
cgit v1.1


From ce816cf9c917435cd2e3b68acc7cfe2c1f4a814f Mon Sep 17 00:00:00 2001
From: Andreas Bombe <aeb@debian.org>
Date: Sun, 14 Sep 2008 01:58:55 +0200
Subject: usb-serial: Add Siemens EF81 to PL-2303 hack triggers

This hardware needs the pl2303 hack in order to work properly :(

Signed-off-by: Andreas Bombe <aeb@debian.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/serial/usb-serial.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index b157c48..4f7f9e3 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -733,7 +733,9 @@ int usb_serial_probe(struct usb_interface *interface,
 	    ((le16_to_cpu(dev->descriptor.idVendor) == ATEN_VENDOR_ID) &&
 	     (le16_to_cpu(dev->descriptor.idProduct) == ATEN_PRODUCT_ID)) ||
 	    ((le16_to_cpu(dev->descriptor.idVendor) == ALCOR_VENDOR_ID) &&
-	     (le16_to_cpu(dev->descriptor.idProduct) == ALCOR_PRODUCT_ID))) {
+	     (le16_to_cpu(dev->descriptor.idProduct) == ALCOR_PRODUCT_ID)) ||
+	    ((le16_to_cpu(dev->descriptor.idVendor) == SIEMENS_VENDOR_ID) &&
+	     (le16_to_cpu(dev->descriptor.idProduct) == SIEMENS_PRODUCT_ID_EF81))) {
 		if (interface != dev->actconfig->interface[0]) {
 			/* check out the endpoints of the other interface*/
 			iface_desc = dev->actconfig->interface[0]->cur_altsetting;
-- 
cgit v1.1


From ba0f332c413796925ce322d311d75269689a9e5d Mon Sep 17 00:00:00 2001
From: Craig Shelley <craig@microtron.org.uk>
Date: Thu, 4 Sep 2008 21:28:21 +0100
Subject: USB: SERIAL CP2101 add device IDs

Signed-off-by: Craig Shelley <craig@microtron.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/serial/cp2101.c | 3 +++
 1 file changed, 3 insertions(+)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c
index 442cba6..1279553 100644
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp2101.c
@@ -72,6 +72,7 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */
 	{ USB_DEVICE(0x10C4, 0x80DD) }, /* Tracient RFID */
 	{ USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */
+	{ USB_DEVICE(0x10C4, 0x8115) }, /* Arygon NFC/Mifare Reader */
 	{ USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */
 	{ USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */
 	{ USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
@@ -83,6 +84,7 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */
 	{ USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
 	{ USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */
+	{ USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
 	{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */
@@ -93,6 +95,7 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */
 	{ USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */
 	{ USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
+	{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
 	{ } /* Terminating Entry */
 };
 
-- 
cgit v1.1


From 2bcbe4c199ec012169f938d2c6b543f50c4925ed Mon Sep 17 00:00:00 2001
From: Chris Adams <cmadams@hiwaay.net>
Date: Wed, 10 Sep 2008 14:11:38 -0700
Subject: usb serial: ti_usb_3410_5052 obviously broken by firmware changes

While making some other changes to ti_usb_3410_5052, I noticed that the
changes made to move the firmware loading to a separate function are
broken (in ti_download_firmware(), status is set to -ENOMEM and never
changed).  This means the driver will never initialize the device
properly.  It looks like status was supposed to get the result of
ti_do_download().

Signed-off-by: Chris Adams <cmadams@hiwaay.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/serial/ti_usb_3410_5052.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index e39c779..9a3e495 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -1744,7 +1744,7 @@ static int ti_download_firmware(struct ti_device *tdev, int type)
 	if (buffer) {
 		memcpy(buffer, fw_p->data, fw_p->size);
 		memset(buffer + fw_p->size, 0xff, buffer_size - fw_p->size);
-		ti_do_download(dev, pipe, buffer, fw_p->size);
+		status = ti_do_download(dev, pipe, buffer, fw_p->size);
 		kfree(buffer);
 	}
 	release_firmware(fw_p);
-- 
cgit v1.1


From a18f80b4e2fdbc7b88d412c3deb533b9f1f30c30 Mon Sep 17 00:00:00 2001
From: Jaroslav Kysela <perex@perex.cz>
Date: Tue, 16 Sep 2008 15:46:50 +0200
Subject: USB: ftdi_sio: Add 0x5050/0x0900 USB IDs (Papouch Quido USB 4/4)

USB: ftdi_sio: Add 0x5050/0x0900 USB IDs (Papouch Quido USB 4/4)

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/serial/ftdi_sio.c | 1 +
 drivers/usb/serial/ftdi_sio.h | 1 +
 2 files changed, 2 insertions(+)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 984f6ef..8ff8d0a 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -654,6 +654,7 @@ static struct usb_device_id id_table_combined [] = {
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
 	{ USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) },
+	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 382265b..ad41287 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -750,6 +750,7 @@
 
 #define PAPOUCH_VID			0x5050	/* Vendor ID */
 #define PAPOUCH_TMU_PID			0x0400	/* TMU USB Thermometer */
+#define PAPOUCH_QUIDO4x4_PID		0x0900	/* Quido 4/4 Module */
 
 /*
  * ACG Identification Technologies GmbH products (http://www.acg.de/).
-- 
cgit v1.1


From 884579d03a3e1e9ac8b7f32a1c36387cac3eb80b Mon Sep 17 00:00:00 2001
From: Otavio Salvador <otavio@ossystems.com.br>
Date: Wed, 17 Sep 2008 14:40:46 -0300
Subject: USB: serial: add ZTE CDMA Tech id to option driver

Signed-off-by: Otavio Salvador <otavio@ossystems.com.br>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/serial/option.c | 2 ++
 1 file changed, 2 insertions(+)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 9f9cd36..73f8277 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -218,6 +218,7 @@ static int  option_send_setup(struct tty_struct *tty, struct usb_serial_port *po
 /* ZTE PRODUCTS */
 #define ZTE_VENDOR_ID				0x19d2
 #define ZTE_PRODUCT_MF628			0x0015
+#define ZTE_PRODUCT_CDMA_TECH			0xfffe
 
 static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
@@ -347,6 +348,7 @@ static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(MAXON_VENDOR_ID, 0x6280) }, /* BP3-USB & BP3-EXT HSDPA */
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) },
 	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) },
+	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) },
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);
-- 
cgit v1.1


From b77a5c7040643e658622148bb7d7dad63e8d0158 Mon Sep 17 00:00:00 2001
From: Kevin Lloyd <klloyd@sierrawireless.com>
Date: Wed, 17 Sep 2008 09:03:38 -0700
Subject: USB Serial: Sierra: Add MC8785 VID/PID

Add another MC8785 VID/PID

Signed-off-by: Kevin Lloyd <klloyd@sierrawireless.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/serial/sierra.c | 1 +
 1 file changed, 1 insertion(+)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index eb87640..ea1a103 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -186,6 +186,7 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x1199, 0x6821) },	/* Sierra Wireless AirCard 875U */
 	{ USB_DEVICE(0x1199, 0x6832) },	/* Sierra Wireless MC8780 */
 	{ USB_DEVICE(0x1199, 0x6833) },	/* Sierra Wireless MC8781 */
+	{ USB_DEVICE(0x1199, 0x683A) },	/* Sierra Wireless MC8785 */
 	{ USB_DEVICE(0x1199, 0x683B) },	/* Sierra Wireless MC8785 Composite */
 	{ USB_DEVICE(0x1199, 0x683C) },	/* Sierra Wireless MC8790 */
 	{ USB_DEVICE(0x1199, 0x683D) },	/* Sierra Wireless MC8790 */
-- 
cgit v1.1


From 96285cb885b445b03b22849f2536af23c7454a11 Mon Sep 17 00:00:00 2001
From: Gaetan Carlier <gcpatch@gmail.com>
Date: Mon, 22 Sep 2008 15:00:09 -0700
Subject: usb: ftdi_sio: add support for Domintell devices

Support for Domintell devices (FTDI FT232BM based) : DGQG and DUSB01
module.  PIDs were missing.

Signed-off-by: Gaetan Carlier <gcpatch@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/serial/ftdi_sio.c | 2 ++
 drivers/usb/serial/ftdi_sio.h | 4 ++++
 2 files changed, 6 insertions(+)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 8ff8d0a..3dc93b5 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -655,6 +655,8 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(RATOC_VENDOR_ID, RATOC_PRODUCT_ID_USB60F) },
 	{ USB_DEVICE(FTDI_VID, FTDI_REU_TINY_PID) },
 	{ USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DGQG_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index ad41287..8a5b6df 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -839,6 +839,10 @@
 /* Rig Expert Ukraine devices */
 #define FTDI_REU_TINY_PID		0xED22	/* RigExpert Tiny */
 
+/* Domintell products  http://www.domintell.com */
+#define FTDI_DOMINTELL_DGQG_PID	0xEF50	/* Master */
+#define FTDI_DOMINTELL_DUSB_PID	0xEF51	/* DUSB01 module */
+
 /* Commands */
 #define FTDI_SIO_RESET 		0 /* Reset the port */
 #define FTDI_SIO_MODEM_CTRL 	1 /* Set the modem control register */
-- 
cgit v1.1


From 7aef709bf6f7a0886ee044960a7a86ea76dc6e2b Mon Sep 17 00:00:00 2001
From: Scott Ashcroft <scott.ashcroft@talk21.com>
Date: Mon, 13 Oct 2008 10:34:00 +0100
Subject: Fix oti6858 debug level

For some reason the oti6858 driver undefines and redefines the dbg
macro. This makes it spew debugging messages at KERN_INFO instead of
KERN_DEBUG.

This patch removes the undef and define making the driver log like every
other USB serial driver.

Signed-off-by: Scott Ashcroft <scott.ashcroft@talk21.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/oti6858.c | 4 ----
 1 file changed, 4 deletions(-)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index 81db571..42f9281 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -224,10 +224,6 @@ struct oti6858_private {
 	struct usb_serial_port *port;   /* USB port with which associated */
 };
 
-#undef dbg
-/* #define dbg(format, arg...) printk(KERN_INFO "%s: " format "\n", __FILE__, ## arg) */
-#define dbg(format, arg...) printk(KERN_INFO "" format "\n", ## arg)
-
 static void setup_line(struct work_struct *work)
 {
 	struct oti6858_private *priv = container_of(work,
-- 
cgit v1.1


From 4ad6de0b3f5d050b70e4c94a0cc8b26503f8cf28 Mon Sep 17 00:00:00 2001
From: Jason Wessel <jason.wessel@windriver.com>
Date: Mon, 13 Oct 2008 10:35:51 +0100
Subject: usb: fix pl2303 initialization

This patch removes the private check for the termios_initialized for
the pl2303 usb driver.  It forced the baud to 9600 on the first call
to pl2303_set_termios()

Based on the tty changes in the 2.6.27 kernel, the termios passed to
the *_set_termios functions is always populated the first time.

This means there is no need to privately initialize the settings the
first time, and doing so will not allow the use of the kernel
parameter "console=ttyUSB0,115200" as an example.

Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/pl2303.c | 11 -----------
 1 file changed, 11 deletions(-)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 1ede144..8d600689 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -154,7 +154,6 @@ struct pl2303_private {
 	wait_queue_head_t delta_msr_wait;
 	u8 line_control;
 	u8 line_status;
-	u8 termios_initialized;
 	enum pl2303_type type;
 };
 
@@ -526,16 +525,6 @@ static void pl2303_set_termios(struct tty_struct *tty,
 
 	dbg("%s -  port %d", __func__, port->number);
 
-	spin_lock_irqsave(&priv->lock, flags);
-	if (!priv->termios_initialized) {
-		*(tty->termios) = tty_std_termios;
-		tty->termios->c_cflag = B9600 | CS8 | CREAD | HUPCL | CLOCAL;
-		tty->termios->c_ispeed = 9600;
-		tty->termios->c_ospeed = 9600;
-		priv->termios_initialized = 1;
-	}
-	spin_unlock_irqrestore(&priv->lock, flags);
-
 	/* The PL2303 is reported to lose bytes if you change
 	   serial settings even to the same values as before. Thus
 	   we actually need to filter in this specific case */
-- 
cgit v1.1


From 43b11d33f2c20c33fcf197780edb2e5d8a1b6a67 Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Mon, 13 Oct 2008 10:36:00 +0100
Subject: ftdi: A few errors are err() that should be debug which causes much
 spewage

Fixes #10783

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/ftdi_sio.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 3dc93b5..1ac7e80 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -860,7 +860,7 @@ static int update_mctrl(struct usb_serial_port *port, unsigned int set,
 
 	kfree(buf);
 	if (rv < 0) {
-		err("%s Error from MODEM_CTRL urb: DTR %s, RTS %s",
+		dbg("%s Error from MODEM_CTRL urb: DTR %s, RTS %s",
 				__func__,
 				(set & TIOCM_DTR) ? "HIGH" :
 				(clear & TIOCM_DTR) ? "LOW" : "unchanged",
@@ -2256,7 +2256,7 @@ static int ftdi_tiocmget(struct tty_struct *tty, struct file *file)
 			   0, 0,
 			   buf, 1, WDR_TIMEOUT);
 		if (ret < 0) {
-			err("%s Could not get modem status of device - err: %d", __func__,
+			dbg("%s Could not get modem status of device - err: %d", __func__,
 			    ret);
 			return ret;
 		}
@@ -2275,7 +2275,7 @@ static int ftdi_tiocmget(struct tty_struct *tty, struct file *file)
 				   0, priv->interface,
 				   buf, 2, WDR_TIMEOUT);
 		if (ret < 0) {
-			err("%s Could not get modem status of device - err: %d", __func__,
+			dbg("%s Could not get modem status of device - err: %d", __func__,
 			    ret);
 			return ret;
 		}
-- 
cgit v1.1


From 4a90f09b20f4622dcbff1f0e1e6bae1704f8ad8c Mon Sep 17 00:00:00 2001
From: Alan Cox <alan@redhat.com>
Date: Mon, 13 Oct 2008 10:39:46 +0100
Subject: tty: usb-serial krefs

Use kref in the USB serial drivers so that we don't free tty structures
from under the URB receive handlers as has historically been the case if
you were unlucky. This also gives us a framework for general tty drivers to
use tty_port objects and refcount.

Contains two err->dev_err changes merged together to fix clashes in the
-next tree.

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
---
 drivers/usb/serial/aircable.c         | 15 ++++---
 drivers/usb/serial/belkin_sa.c        |  3 +-
 drivers/usb/serial/console.c          |  8 ++--
 drivers/usb/serial/cyberjack.c        |  3 +-
 drivers/usb/serial/cypress_m8.c       |  5 ++-
 drivers/usb/serial/digi_acceleport.c  | 19 ++++++---
 drivers/usb/serial/empeg.c            |  8 ++--
 drivers/usb/serial/ftdi_sio.c         | 19 +++++----
 drivers/usb/serial/garmin_gps.c       |  3 +-
 drivers/usb/serial/generic.c          |  3 +-
 drivers/usb/serial/io_edgeport.c      | 43 ++++++++++++-------
 drivers/usb/serial/io_ti.c            | 26 ++++++++----
 drivers/usb/serial/ipaq.c             |  3 +-
 drivers/usb/serial/ipw.c              |  3 +-
 drivers/usb/serial/ir-usb.c           |  3 +-
 drivers/usb/serial/iuu_phoenix.c      |  3 +-
 drivers/usb/serial/keyspan.c          | 77 ++++++++++++++++++-----------------
 drivers/usb/serial/keyspan_pda.c      | 16 +++++---
 drivers/usb/serial/kl5kusb105.c       |  3 +-
 drivers/usb/serial/kobil_sct.c        |  3 +-
 drivers/usb/serial/mct_u232.c         |  6 ++-
 drivers/usb/serial/mos7720.c          | 36 ++--------------
 drivers/usb/serial/mos7840.c          |  7 ++--
 drivers/usb/serial/navman.c           |  3 +-
 drivers/usb/serial/omninet.c          | 10 +++--
 drivers/usb/serial/option.c           | 18 ++++----
 drivers/usb/serial/oti6858.c          |  3 +-
 drivers/usb/serial/pl2303.c           |  4 +-
 drivers/usb/serial/safe_serial.c      | 11 +++--
 drivers/usb/serial/sierra.c           | 16 ++++----
 drivers/usb/serial/spcp8x5.c          |  3 +-
 drivers/usb/serial/ti_usb_3410_5052.c | 44 ++++++++++----------
 drivers/usb/serial/usb-serial.c       | 24 +++++++----
 drivers/usb/serial/visor.c            | 18 ++++----
 drivers/usb/serial/whiteheat.c        |  8 ++--
 35 files changed, 269 insertions(+), 208 deletions(-)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c
index 79ea98c..99fb7dc 100644
--- a/drivers/usb/serial/aircable.c
+++ b/drivers/usb/serial/aircable.c
@@ -272,7 +272,7 @@ static void aircable_read(struct work_struct *work)
 	 * 64 bytes, to ensure I do not get throttled.
 	 * Ask USB mailing list for better aproach.
 	 */
-	tty = port->port.tty;
+	tty = tty_port_tty_get(&port->port);
 
 	if (!tty) {
 		schedule_work(&priv->rx_work);
@@ -283,12 +283,13 @@ static void aircable_read(struct work_struct *work)
 	count = min(64, serial_buf_data_avail(priv->rx_buf));
 
 	if (count <= 0)
-		return; /* We have finished sending everything. */
+		goto out; /* We have finished sending everything. */
 
 	tty_prepare_flip_string(tty, &data, count);
 	if (!data) {
-		err("%s- kzalloc(%d) failed.", __func__, count);
-		return;
+		dev_err(&port->dev, "%s- kzalloc(%d) failed.",
+							__func__, count);
+		goto out;
 	}
 
 	serial_buf_get(priv->rx_buf, data, count);
@@ -297,7 +298,8 @@ static void aircable_read(struct work_struct *work)
 
 	if (serial_buf_data_avail(priv->rx_buf))
 		schedule_work(&priv->rx_work);
-
+out:		
+	tty_kref_put(tty);
 	return;
 }
 /* End of private methods */
@@ -495,7 +497,7 @@ static void aircable_read_bulk_callback(struct urb *urb)
 	usb_serial_debug_data(debug, &port->dev, __func__,
 				urb->actual_length, urb->transfer_buffer);
 
-	tty = port->port.tty;
+	tty = tty_port_tty_get(&port->port);
 	if (tty && urb->actual_length) {
 		if (urb->actual_length <= 2) {
 			/* This is an incomplete package */
@@ -527,6 +529,7 @@ static void aircable_read_bulk_callback(struct urb *urb)
 		}
 		aircable_read(&priv->rx_work);
 	}
+	tty_kref_put(tty);
 
 	/* Schedule the next read _if_ we are still open */
 	if (port->port.count) {
diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index 2ebe06c..1913bc7 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -322,7 +322,7 @@ static void belkin_sa_read_int_callback(struct urb *urb)
 	 * to look in to this before committing any code.
 	 */
 	if (priv->last_lsr & BELKIN_SA_LSR_ERR) {
-		tty = port->port.tty;
+		tty = tty_port_tty_get(&port->port);
 		/* Overrun Error */
 		if (priv->last_lsr & BELKIN_SA_LSR_OE) {
 		}
@@ -335,6 +335,7 @@ static void belkin_sa_read_int_callback(struct urb *urb)
 		/* Break Indicator */
 		if (priv->last_lsr & BELKIN_SA_LSR_BI) {
 		}
+		tty_kref_put(tty);
 	}
 #endif
 	spin_unlock_irqrestore(&priv->lock, flags);
diff --git a/drivers/usb/serial/console.c b/drivers/usb/serial/console.c
index e980766..5b20de1 100644
--- a/drivers/usb/serial/console.c
+++ b/drivers/usb/serial/console.c
@@ -117,7 +117,7 @@ static int usb_console_setup(struct console *co, char *options)
 	}
 
 	port = serial->port[0];
-	port->port.tty = NULL;
+	tty_port_tty_set(&port->port, NULL);
 
 	info->port = port;
 
@@ -143,7 +143,7 @@ static int usb_console_setup(struct console *co, char *options)
 			}
 			memset(&dummy, 0, sizeof(struct ktermios));
 			tty->termios = termios;
-			port->port.tty = tty;
+			tty_port_tty_set(&port->port, tty);
 		}
 
 		/* only call the device specific open if this
@@ -163,7 +163,7 @@ static int usb_console_setup(struct console *co, char *options)
 			tty_termios_encode_baud_rate(termios, baud, baud);
 			serial->type->set_termios(tty, port, &dummy);
 
-			port->port.tty = NULL;
+			tty_port_tty_set(&port->port, NULL);
 			kfree(termios);
 			kfree(tty);
 		}
@@ -176,7 +176,7 @@ out:
 	return retval;
 free_termios:
 	kfree(termios);
-	port->port.tty = NULL;
+	tty_port_tty_set(&port->port, NULL);
 free_tty:
 	kfree(tty);
 reset_open_count:
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index b4d7235..94ef36c 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -384,7 +384,7 @@ static void cyberjack_read_bulk_callback(struct urb *urb)
 		return;
 	}
 
-	tty = port->port.tty;
+	tty = tty_port_tty_get(&port->port);
 	if (!tty) {
 		dbg("%s - ignoring since device not open\n", __func__);
 		return;
@@ -394,6 +394,7 @@ static void cyberjack_read_bulk_callback(struct urb *urb)
 		tty_insert_flip_string(tty, data, urb->actual_length);
 		tty_flip_buffer_push(tty);
 	}
+	tty_kref_put(tty);
 
 	spin_lock(&priv->lock);
 
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index 22837a3..f3514a9 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -1286,7 +1286,7 @@ static void cypress_read_int_callback(struct urb *urb)
 	}
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	tty = port->port.tty;
+	tty = tty_port_tty_get(&port->port);
 	if (!tty) {
 		dbg("%s - bad tty pointer - exiting", __func__);
 		return;
@@ -1362,7 +1362,7 @@ static void cypress_read_int_callback(struct urb *urb)
 					data[i]);
 			tty_insert_flip_char(tty, data[i], tty_flag);
 		}
-		tty_flip_buffer_push(port->port.tty);
+		tty_flip_buffer_push(tty);
 	}
 
 	spin_lock_irqsave(&priv->lock, flags);
@@ -1371,6 +1371,7 @@ static void cypress_read_int_callback(struct urb *urb)
 	spin_unlock_irqrestore(&priv->lock, flags);
 
 continue_read:
+	tty_kref_put(tty);
 
 	/* Continue trying to always read... unless the port has closed. */
 
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index 240aad1..5756ac6 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -604,7 +604,9 @@ static void digi_wakeup_write_lock(struct work_struct *work)
 
 static void digi_wakeup_write(struct usb_serial_port *port)
 {
-	tty_wakeup(port->port.tty);
+	struct tty_struct *tty = tty_port_tty_get(&port->port);
+	tty_wakeup(tty);
+	tty_kref_put(tty);
 }
 
 
@@ -1668,7 +1670,7 @@ static int digi_read_inb_callback(struct urb *urb)
 {
 
 	struct usb_serial_port *port = urb->context;
-	struct tty_struct *tty = port->port.tty;
+	struct tty_struct *tty;
 	struct digi_port *priv = usb_get_serial_port_data(port);
 	int opcode = ((unsigned char *)urb->transfer_buffer)[0];
 	int len = ((unsigned char *)urb->transfer_buffer)[1];
@@ -1692,6 +1694,7 @@ static int digi_read_inb_callback(struct urb *urb)
 		return -1;
 	}
 
+	tty = tty_port_tty_get(&port->port);
 	spin_lock(&priv->dp_port_lock);
 
 	/* check for throttle; if set, do not resubmit read urb */
@@ -1735,6 +1738,7 @@ static int digi_read_inb_callback(struct urb *urb)
 		}
 	}
 	spin_unlock(&priv->dp_port_lock);
+	tty_kref_put(tty);
 
 	if (opcode == DIGI_CMD_RECEIVE_DISABLE)
 		dbg("%s: got RECEIVE_DISABLE", __func__);
@@ -1760,6 +1764,7 @@ static int digi_read_oob_callback(struct urb *urb)
 
 	struct usb_serial_port *port = urb->context;
 	struct usb_serial *serial = port->serial;
+	struct tty_struct *tty;
 	struct digi_port *priv = usb_get_serial_port_data(port);
 	int opcode, line, status, val;
 	int i;
@@ -1787,10 +1792,11 @@ static int digi_read_oob_callback(struct urb *urb)
 		if (priv == NULL)
 			return -1;
 
+		tty = tty_port_tty_get(&port->port);
 		rts = 0;
 		if (port->port.count)
-			rts = port->port.tty->termios->c_cflag & CRTSCTS;
-
+			rts = tty->termios->c_cflag & CRTSCTS;
+		
 		if (opcode == DIGI_CMD_READ_INPUT_SIGNALS) {
 			spin_lock(&priv->dp_port_lock);
 			/* convert from digi flags to termiox flags */
@@ -1798,14 +1804,14 @@ static int digi_read_oob_callback(struct urb *urb)
 				priv->dp_modem_signals |= TIOCM_CTS;
 				/* port must be open to use tty struct */
 				if (rts) {
-					port->port.tty->hw_stopped = 0;
+					tty->hw_stopped = 0;
 					digi_wakeup_write(port);
 				}
 			} else {
 				priv->dp_modem_signals &= ~TIOCM_CTS;
 				/* port must be open to use tty struct */
 				if (rts)
-					port->port.tty->hw_stopped = 1;
+					tty->hw_stopped = 1;
 			}
 			if (val & DIGI_READ_INPUT_SIGNALS_DSR)
 				priv->dp_modem_signals |= TIOCM_DSR;
@@ -1830,6 +1836,7 @@ static int digi_read_oob_callback(struct urb *urb)
 		} else if (opcode == DIGI_CMD_IFLUSH_FIFO) {
 			wake_up_interruptible(&priv->dp_flush_wait);
 		}
+		tty_kref_put(tty);
 	}
 	return 0;
 
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index a6ab5b5..1072e84 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -33,9 +33,8 @@
  *	Moved MOD_DEC_USE_COUNT to end of empeg_close().
  *
  * (12/03/2000) gb
- *	Added port->port.tty->ldisc.set_termios(port->port.tty, NULL) to
- *	empeg_open(). This notifies the tty driver that the termios have
- *	changed.
+ *	Added tty->ldisc.set_termios(port, tty, NULL) to empeg_open().
+ *	This notifies the tty driver that the termios have changed.
  *
  * (11/13/2000) gb
  *	Moved tty->low_latency = 1 from empeg_read_bulk_callback() to
@@ -354,7 +353,7 @@ static void empeg_read_bulk_callback(struct urb *urb)
 
 	usb_serial_debug_data(debug, &port->dev, __func__,
 						urb->actual_length, data);
-	tty = port->port.tty;
+	tty = tty_port_tty_get(&port->port);
 
 	if (urb->actual_length) {
 		tty_buffer_request_room(tty, urb->actual_length);
@@ -362,6 +361,7 @@ static void empeg_read_bulk_callback(struct urb *urb)
 		tty_flip_buffer_push(tty);
 		bytes_in += urb->actual_length;
 	}
+	tty_kref_put(tty);
 
 	/* Continue trying to always read  */
 	usb_fill_bulk_urb(
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 1ac7e80..c2ac129 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1808,7 +1808,7 @@ static void ftdi_read_bulk_callback(struct urb *urb)
 	if (port->port.count <= 0)
 		return;
 
-	tty = port->port.tty;
+	tty = tty_port_tty_get(&port->port);
 	if (!tty) {
 		dbg("%s - bad tty pointer - exiting", __func__);
 		return;
@@ -1817,7 +1817,7 @@ static void ftdi_read_bulk_callback(struct urb *urb)
 	priv = usb_get_serial_port_data(port);
 	if (!priv) {
 		dbg("%s - bad port private data pointer - exiting", __func__);
-		return;
+		goto out;
 	}
 
 	if (urb != port->read_urb)
@@ -1827,7 +1827,7 @@ static void ftdi_read_bulk_callback(struct urb *urb)
 		/* This will happen at close every time so it is a dbg not an
 		   err */
 		dbg("(this is ok on close) nonzero read bulk status received: %d", status);
-		return;
+		goto out;
 	}
 
 	/* count data bytes, but not status bytes */
@@ -1838,7 +1838,8 @@ static void ftdi_read_bulk_callback(struct urb *urb)
 	spin_unlock_irqrestore(&priv->rx_lock, flags);
 
 	ftdi_process_read(&priv->rx_work.work);
-
+out:
+	tty_kref_put(tty);
 } /* ftdi_read_bulk_callback */
 
 
@@ -1863,7 +1864,7 @@ static void ftdi_process_read(struct work_struct *work)
 	if (port->port.count <= 0)
 		return;
 
-	tty = port->port.tty;
+	tty = tty_port_tty_get(&port->port);
 	if (!tty) {
 		dbg("%s - bad tty pointer - exiting", __func__);
 		return;
@@ -1872,13 +1873,13 @@ static void ftdi_process_read(struct work_struct *work)
 	priv = usb_get_serial_port_data(port);
 	if (!priv) {
 		dbg("%s - bad port private data pointer - exiting", __func__);
-		return;
+		goto out;
 	}
 
 	urb = port->read_urb;
 	if (!urb) {
 		dbg("%s - bad read_urb pointer - exiting", __func__);
-		return;
+		goto out;
 	}
 
 	data = urb->transfer_buffer;
@@ -2020,7 +2021,7 @@ static void ftdi_process_read(struct work_struct *work)
 			schedule_delayed_work(&priv->rx_work, 1);
 		else
 			dbg("%s - port is closed", __func__);
-		return;
+		goto out;
 	}
 
 	/* urb is completely processed */
@@ -2041,6 +2042,8 @@ static void ftdi_process_read(struct work_struct *work)
 			err("%s - failed resubmitting read urb, error %d",
 							__func__, result);
 	}
+out:
+	tty_kref_put(tty);
 } /* ftdi_process_read */
 
 
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index d953820..2ad0569 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -276,7 +276,7 @@ static inline int isAbortTrfCmnd(const unsigned char *buf)
 static void send_to_tty(struct usb_serial_port *port,
 			char *data, unsigned int actual_length)
 {
-	struct tty_struct *tty = port->port.tty;
+	struct tty_struct *tty = tty_port_tty_get(&port->port);
 
 	if (tty && actual_length) {
 
@@ -287,6 +287,7 @@ static void send_to_tty(struct usb_serial_port *port,
 		tty_insert_flip_string(tty, data, actual_length);
 		tty_flip_buffer_push(tty);
 	}
+	tty_kref_put(tty);
 }
 
 
diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c
index fe84c88..814909f 100644
--- a/drivers/usb/serial/generic.c
+++ b/drivers/usb/serial/generic.c
@@ -330,7 +330,7 @@ static void resubmit_read_urb(struct usb_serial_port *port, gfp_t mem_flags)
 static void flush_and_resubmit_read_urb(struct usb_serial_port *port)
 {
 	struct urb *urb = port->read_urb;
-	struct tty_struct *tty = port->port.tty;
+	struct tty_struct *tty = tty_port_tty_get(&port->port);
 	int room;
 
 	/* Push data to tty */
@@ -341,6 +341,7 @@ static void flush_and_resubmit_read_urb(struct usb_serial_port *port)
 			tty_flip_buffer_push(tty);
 		}
 	}
+	tty_kref_put(tty);
 
 	resubmit_read_urb(port, GFP_ATOMIC);
 }
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index bfa508d..611f97f 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -600,6 +600,7 @@ static void edge_interrupt_callback(struct urb *urb)
 	struct edgeport_serial	*edge_serial = urb->context;
 	struct edgeport_port *edge_port;
 	struct usb_serial_port *port;
+	struct tty_struct *tty;
 	unsigned char *data = urb->transfer_buffer;
 	int length = urb->actual_length;
 	int bytes_avail;
@@ -675,9 +676,12 @@ static void edge_interrupt_callback(struct urb *urb)
 
 					/* tell the tty driver that something
 					   has changed */
-					if (edge_port->port->port.tty)
-						tty_wakeup(edge_port->port->port.tty);
-
+					tty = tty_port_tty_get(
+						&edge_port->port->port);
+					if (tty) {
+						tty_wakeup(tty);
+						tty_kref_put(tty);
+					}
 					/* Since we have more credit, check
 					   if more data can be sent */
 					send_more_port_data(edge_serial,
@@ -778,13 +782,14 @@ static void edge_bulk_out_data_callback(struct urb *urb)
 		    __func__, status);
 	}
 
-	tty = edge_port->port->port.tty;
+	tty = tty_port_tty_get(&edge_port->port->port);
 
 	if (tty && edge_port->open) {
 		/* let the tty driver wakeup if it has a special
 		   write_wakeup function */
 		tty_wakeup(tty);
 	}
+	tty_kref_put(tty);
 
 	/* Release the Write URB */
 	edge_port->write_in_progress = false;
@@ -826,11 +831,12 @@ static void edge_bulk_out_cmd_callback(struct urb *urb)
 	}
 
 	/* Get pointer to tty */
-	tty = edge_port->port->port.tty;
+	tty = tty_port_tty_get(&edge_port->port->port);
 
 	/* tell the tty driver that something has changed */
 	if (tty && edge_port->open)
 		tty_wakeup(tty);
+	tty_kref_put(tty);
 
 	/* we have completed the command */
 	edge_port->commandPending = false;
@@ -1932,11 +1938,13 @@ static void process_rcvd_data(struct edgeport_serial *edge_serial,
 							edge_serial->rxPort];
 				edge_port = usb_get_serial_port_data(port);
 				if (edge_port->open) {
-					tty = edge_port->port->port.tty;
+					tty = tty_port_tty_get(
+						&edge_port->port->port);
 					if (tty) {
 						dbg("%s - Sending %d bytes to TTY for port %d",
 							__func__, rxLen, edge_serial->rxPort);
 						edge_tty_recv(&edge_serial->serial->dev->dev, tty, buffer, rxLen);
+						tty_kref_put(tty);
 					}
 					edge_port->icount.rx += rxLen;
 				}
@@ -1971,6 +1979,7 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial,
 {
 	struct usb_serial_port *port;
 	struct edgeport_port *edge_port;
+	struct tty_struct *tty;
 	__u8 code = edge_serial->rxStatusCode;
 
 	/* switch the port pointer to the one being currently talked about */
@@ -2020,10 +2029,12 @@ static void process_rcvd_status(struct edgeport_serial *edge_serial,
 
 		/* send the current line settings to the port so we are
 		   in sync with any further termios calls */
-		/* FIXME: locking on tty */
-		if (edge_port->port->port.tty)
-			change_port_settings(edge_port->port->port.tty,
-				edge_port, edge_port->port->port.tty->termios);
+		tty = tty_port_tty_get(&edge_port->port->port);
+		if (tty) {
+			change_port_settings(tty,
+				edge_port, tty->termios);
+			tty_kref_put(tty);
+		}
 
 		/* we have completed the open */
 		edge_port->openPending = false;
@@ -2163,10 +2174,14 @@ static void handle_new_lsr(struct edgeport_port *edge_port, __u8 lsrData,
 	}
 
 	/* Place LSR data byte into Rx buffer */
-	if (lsrData && edge_port->port->port.tty)
-		edge_tty_recv(&edge_port->port->dev,
-					edge_port->port->port.tty, &data, 1);
-
+	if (lsrData) {
+		struct tty_struct *tty =
+				tty_port_tty_get(&edge_port->port->port);
+		if (tty) {
+			edge_tty_recv(&edge_port->port->dev, tty, &data, 1);
+			tty_kref_put(tty);
+		}
+	}
 	/* update input line counters */
 	icount = &edge_port->icount;
 	if (newLsr & LSR_BREAK)
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index cb4c543..541dd8e 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -572,7 +572,7 @@ static void chase_port(struct edgeport_port *port, unsigned long timeout,
 								int flush)
 {
 	int baud_rate;
-	struct tty_struct *tty = port->port->port.tty;
+	struct tty_struct *tty = tty_port_tty_get(&port->port->port);
 	wait_queue_t wait;
 	unsigned long flags;
 
@@ -599,6 +599,7 @@ static void chase_port(struct edgeport_port *port, unsigned long timeout,
 	if (flush)
 		edge_buf_clear(port->ep_out_buf);
 	spin_unlock_irqrestore(&port->ep_lock, flags);
+	tty_kref_put(tty);
 
 	/* wait for data to drain from the device */
 	timeout += jiffies;
@@ -1554,7 +1555,7 @@ static void handle_new_msr(struct edgeport_port *edge_port, __u8 msr)
 	/* Save the new modem status */
 	edge_port->shadow_msr = msr & 0xf0;
 
-	tty = edge_port->port->port.tty;
+	tty = tty_port_tty_get(&edge_port->port->port);
 	/* handle CTS flow control */
 	if (tty && C_CRTSCTS(tty)) {
 		if (msr & EDGEPORT_MSR_CTS) {
@@ -1564,6 +1565,7 @@ static void handle_new_msr(struct edgeport_port *edge_port, __u8 msr)
 			tty->hw_stopped = 1;
 		}
 	}
+	tty_kref_put(tty);
 
 	return;
 }
@@ -1574,6 +1576,7 @@ static void handle_new_lsr(struct edgeport_port *edge_port, int lsr_data,
 	struct async_icount *icount;
 	__u8 new_lsr = (__u8)(lsr & (__u8)(LSR_OVER_ERR | LSR_PAR_ERR |
 						LSR_FRM_ERR | LSR_BREAK));
+	struct tty_struct *tty;
 
 	dbg("%s - %02x", __func__, new_lsr);
 
@@ -1587,8 +1590,13 @@ static void handle_new_lsr(struct edgeport_port *edge_port, int lsr_data,
 		new_lsr &= (__u8)(LSR_OVER_ERR | LSR_BREAK);
 
 	/* Place LSR data byte into Rx buffer */
-	if (lsr_data && edge_port->port->port.tty)
-		edge_tty_recv(&edge_port->port->dev, edge_port->port->port.tty, &data, 1);
+	if (lsr_data) {
+		tty = tty_port_tty_get(&edge_port->port->port);
+		if (tty) {
+			edge_tty_recv(&edge_port->port->dev, tty, &data, 1);
+			tty_kref_put(tty);
+		}
+	}
 
 	/* update input line counters */
 	icount = &edge_port->icount;
@@ -1749,7 +1757,7 @@ static void edge_bulk_in_callback(struct urb *urb)
 		++data;
 	}
 
-	tty = edge_port->port->port.tty;
+	tty = tty_port_tty_get(&edge_port->port->port);
 	if (tty && urb->actual_length) {
 		usb_serial_debug_data(debug, &edge_port->port->dev,
 					__func__, urb->actual_length, data);
@@ -1761,6 +1769,7 @@ static void edge_bulk_in_callback(struct urb *urb)
 							urb->actual_length);
 		edge_port->icount.rx += urb->actual_length;
 	}
+	tty_kref_put(tty);
 
 exit:
 	/* continue read unless stopped */
@@ -1796,6 +1805,7 @@ static void edge_bulk_out_callback(struct urb *urb)
 	struct usb_serial_port *port = urb->context;
 	struct edgeport_port *edge_port = usb_get_serial_port_data(port);
 	int status = urb->status;
+	struct tty_struct *tty;
 
 	dbg("%s - port %d", __func__, port->number);
 
@@ -1818,7 +1828,9 @@ static void edge_bulk_out_callback(struct urb *urb)
 	}
 
 	/* send any buffered data */
-	edge_send(port->port.tty);
+	tty = tty_port_tty_get(&port->port);
+	edge_send(tty);
+	tty_kref_put(tty);
 }
 
 static int edge_open(struct tty_struct *tty,
@@ -1876,7 +1888,7 @@ static int edge_open(struct tty_struct *tty,
 
 	/* set up the port settings */
 	if (tty)
-		edge_set_termios(tty, port, port->port.tty->termios);
+		edge_set_termios(tty, port, tty->termios);
 
 	/* open up the port */
 
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index cd9a2e13..2affa9c 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -764,13 +764,14 @@ static void ipaq_read_bulk_callback(struct urb *urb)
 	usb_serial_debug_data(debug, &port->dev, __func__,
 						urb->actual_length, data);
 
-	tty = port->port.tty;
+	tty = tty_port_tty_get(&port->port);
 	if (tty && urb->actual_length) {
 		tty_buffer_request_room(tty, urb->actual_length);
 		tty_insert_flip_string(tty, data, urb->actual_length);
 		tty_flip_buffer_push(tty);
 		bytes_in += urb->actual_length;
 	}
+	tty_kref_put(tty);
 
 	/* Continue trying to always read  */
 	usb_fill_bulk_urb(port->read_urb, port->serial->dev,
diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c
index a842025..480cac2 100644
--- a/drivers/usb/serial/ipw.c
+++ b/drivers/usb/serial/ipw.c
@@ -170,12 +170,13 @@ static void ipw_read_bulk_callback(struct urb *urb)
 	usb_serial_debug_data(debug, &port->dev, __func__,
 					urb->actual_length, data);
 
-	tty = port->port.tty;
+	tty = tty_port_tty_get(&port->port);
 	if (tty && urb->actual_length) {
 		tty_buffer_request_room(tty, urb->actual_length);
 		tty_insert_flip_string(tty, data, urb->actual_length);
 		tty_flip_buffer_push(tty);
 	}
+	tty_kref_put(tty);
 
 	/* Continue trying to always read  */
 	usb_fill_bulk_urb(port->read_urb, port->serial->dev,
diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c
index e59155c..45d4043 100644
--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -465,11 +465,12 @@ static void ir_read_bulk_callback(struct urb *urb)
 			ir_baud = *data & 0x0f;
 		usb_serial_debug_data(debug, &port->dev, __func__,
 						urb->actual_length, data);
- 		tty = port->port.tty;
+		tty = tty_port_tty_get(&port->port);
 		if (tty_buffer_request_room(tty, urb->actual_length - 1)) {
 			tty_insert_flip_string(tty, data+1, urb->actual_length - 1);
 			tty_flip_buffer_push(tty);
 		}
+		tty_kref_put(tty);
 
 		/*
 		 * No break here.
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index ddff37f..53710aa7 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -629,13 +629,14 @@ static void read_buf_callback(struct urb *urb)
 	}
 
 	dbg("%s - %i chars to write", __func__, urb->actual_length);
-	tty = port->port.tty;
+	tty = tty_port_tty_get(&port->port);
 	if (data == NULL)
 		dbg("%s - data is NULL !!!", __func__);
 	if (tty && urb->actual_length && data) {
 		tty_insert_flip_string(tty, data, urb->actual_length);
 		tty_flip_buffer_push(tty);
 	}
+	tty_kref_put(tty);
 	iuu_led_activity_on(urb);
 }
 
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 704716f..15447af 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -430,7 +430,7 @@ static void	usa26_indat_callback(struct urb *urb)
 	}
 
 	port =  urb->context;
-	tty = port->port.tty;
+	tty = tty_port_tty_get(&port->port);
 	if (tty && urb->actual_length) {
 		/* 0x80 bit is error flag */
 		if ((data[0] & 0x80) == 0) {
@@ -459,6 +459,7 @@ static void	usa26_indat_callback(struct urb *urb)
 		}
 		tty_flip_buffer_push(tty);
 	}
+	tty_kref_put(tty);
 
 	/* Resubmit urb so we continue receiving */
 	urb->dev = port->serial->dev;
@@ -513,6 +514,7 @@ static void	usa26_instat_callback(struct urb *urb)
 	struct usb_serial			*serial;
 	struct usb_serial_port			*port;
 	struct keyspan_port_private	 	*p_priv;
+	struct tty_struct			*tty;
 	int old_dcd_state, err;
 	int status = urb->status;
 
@@ -553,12 +555,11 @@ static void	usa26_instat_callback(struct urb *urb)
 	p_priv->dcd_state = ((msg->gpia_dcd) ? 1 : 0);
 	p_priv->ri_state = ((msg->ri) ? 1 : 0);
 
-	if (port->port.tty && !C_CLOCAL(port->port.tty)
-	    && old_dcd_state != p_priv->dcd_state) {
-		if (old_dcd_state)
-			tty_hangup(port->port.tty);
-		/*  else */
-		/*	wake_up_interruptible(&p_priv->open_wait); */
+	if (old_dcd_state != p_priv->dcd_state) {
+		tty = tty_port_tty_get(&port->port);
+		if (tty && !C_CLOCAL(tty))
+			tty_hangup(tty);
+		tty_kref_put(tty);
 	}
 
 	/* Resubmit urb so we continue receiving */
@@ -604,11 +605,12 @@ static void usa28_indat_callback(struct urb *urb)
 		p_priv = usb_get_serial_port_data(port);
 		data = urb->transfer_buffer;
 
-		tty = port->port.tty;
-		if (urb->actual_length) {
+		tty =tty_port_tty_get(&port->port);
+		if (tty && urb->actual_length) {
 			tty_insert_flip_string(tty, data, urb->actual_length);
 			tty_flip_buffer_push(tty);
 		}
+		tty_kref_put(tty);
 
 		/* Resubmit urb so we continue receiving */
 		urb->dev = port->serial->dev;
@@ -652,6 +654,7 @@ static void	usa28_instat_callback(struct urb *urb)
 	struct usb_serial			*serial;
 	struct usb_serial_port			*port;
 	struct keyspan_port_private	 	*p_priv;
+	struct tty_struct			*tty;
 	int old_dcd_state;
 	int status = urb->status;
 
@@ -689,12 +692,11 @@ static void	usa28_instat_callback(struct urb *urb)
 	p_priv->dcd_state = ((msg->dcd) ? 1 : 0);
 	p_priv->ri_state = ((msg->ri) ? 1 : 0);
 
-	if (port->port.tty && !C_CLOCAL(port->port.tty)
-	    && old_dcd_state != p_priv->dcd_state) {
-		if (old_dcd_state)
-			tty_hangup(port->port.tty);
-		/*  else */
-		/*	wake_up_interruptible(&p_priv->open_wait); */
+	if( old_dcd_state != p_priv->dcd_state && old_dcd_state) {
+		tty = tty_port_tty_get(&port->port);
+		if (tty && !C_CLOCAL(tty)) 
+			tty_hangup(tty);
+		tty_kref_put(tty);
 	}
 
 		/* Resubmit urb so we continue receiving */
@@ -785,12 +787,11 @@ static void	usa49_instat_callback(struct urb *urb)
 	p_priv->dcd_state = ((msg->dcd) ? 1 : 0);
 	p_priv->ri_state = ((msg->ri) ? 1 : 0);
 
-	if (port->port.tty && !C_CLOCAL(port->port.tty)
-	    && old_dcd_state != p_priv->dcd_state) {
-		if (old_dcd_state)
-			tty_hangup(port->port.tty);
-		/*  else */
-		/*	wake_up_interruptible(&p_priv->open_wait); */
+	if (old_dcd_state != p_priv->dcd_state && old_dcd_state) {
+		struct tty_struct *tty = tty_port_tty_get(&port->port);
+		if (tty && !C_CLOCAL(tty))
+			tty_hangup(tty);
+		tty_kref_put(tty);
 	}
 
 	/* Resubmit urb so we continue receiving */
@@ -827,7 +828,7 @@ static void	usa49_indat_callback(struct urb *urb)
 	}
 
 	port =  urb->context;
-	tty = port->port.tty;
+	tty = tty_port_tty_get(&port->port);
 	if (tty && urb->actual_length) {
 		/* 0x80 bit is error flag */
 		if ((data[0] & 0x80) == 0) {
@@ -850,6 +851,7 @@ static void	usa49_indat_callback(struct urb *urb)
 		}
 		tty_flip_buffer_push(tty);
 	}
+	tty_kref_put(tty);
 
 	/* Resubmit urb so we continue receiving */
 	urb->dev = port->serial->dev;
@@ -893,7 +895,7 @@ static void usa49wg_indat_callback(struct urb *urb)
 				return;
 			}
 			port = serial->port[data[i++]];
-			tty = port->port.tty;
+			tty = tty_port_tty_get(&port->port);
 			len = data[i++];
 
 			/* 0x80 bit is error flag */
@@ -927,6 +929,7 @@ static void usa49wg_indat_callback(struct urb *urb)
 			}
 			if (port->port.count)
 				tty_flip_buffer_push(tty);
+			tty_kref_put(tty);
 		}
 	}
 
@@ -967,8 +970,8 @@ static void usa90_indat_callback(struct urb *urb)
 	port =  urb->context;
 	p_priv = usb_get_serial_port_data(port);
 
-	tty = port->port.tty;
 	if (urb->actual_length) {
+		tty = tty_port_tty_get(&port->port);
 		/* if current mode is DMA, looks like usa28 format
 		   otherwise looks like usa26 data format */
 
@@ -1004,6 +1007,7 @@ static void usa90_indat_callback(struct urb *urb)
 			}
 		}
 		tty_flip_buffer_push(tty);
+		tty_kref_put(tty);
 	}
 
 	/* Resubmit urb so we continue receiving */
@@ -1025,6 +1029,7 @@ static void	usa90_instat_callback(struct urb *urb)
 	struct usb_serial			*serial;
 	struct usb_serial_port			*port;
 	struct keyspan_port_private	 	*p_priv;
+	struct tty_struct			*tty;
 	int old_dcd_state, err;
 	int status = urb->status;
 
@@ -1053,12 +1058,11 @@ static void	usa90_instat_callback(struct urb *urb)
 	p_priv->dcd_state = ((msg->dcd) ? 1 : 0);
 	p_priv->ri_state = ((msg->ri) ? 1 : 0);
 
-	if (port->port.tty && !C_CLOCAL(port->port.tty)
-	    && old_dcd_state != p_priv->dcd_state) {
-		if (old_dcd_state)
-			tty_hangup(port->port.tty);
-		/*  else */
-		/*	wake_up_interruptible(&p_priv->open_wait); */
+	if (old_dcd_state != p_priv->dcd_state && old_dcd_state) {
+		tty = tty_port_tty_get(&port->port);
+		if (tty && !C_CLOCAL(tty))
+			tty_hangup(tty);
+		tty_kref_put(tty);
 	}
 
 	/* Resubmit urb so we continue receiving */
@@ -1130,12 +1134,11 @@ static void	usa67_instat_callback(struct urb *urb)
 	p_priv->cts_state = ((msg->hskia_cts) ? 1 : 0);
 	p_priv->dcd_state = ((msg->gpia_dcd) ? 1 : 0);
 
-	if (port->port.tty && !C_CLOCAL(port->port.tty)
-	    && old_dcd_state != p_priv->dcd_state) {
-		if (old_dcd_state)
-			tty_hangup(port->port.tty);
-		/*  else */
-		/*	wake_up_interruptible(&p_priv->open_wait); */
+	if (old_dcd_state != p_priv->dcd_state && old_dcd_state) {
+		struct tty_struct *tty = tty_port_tty_get(&port->port);
+		if (tty && !C_CLOCAL(tty))
+			tty_hangup(tty);
+		tty_kref_put(tty);
 	}
 
 	/* Resubmit urb so we continue receiving */
@@ -1332,7 +1335,7 @@ static void keyspan_close(struct tty_struct *tty,
 			stop_urb(p_priv->out_urbs[i]);
 		}
 	}
-	port->port.tty = NULL;
+	tty_port_tty_set(&port->port, NULL);
 }
 
 /* download the firmware to a pre-renumeration device */
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index 040040a..99e9a14 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -172,8 +172,9 @@ static void keyspan_pda_wakeup_write(struct work_struct *work)
 	struct keyspan_pda_private *priv =
 		container_of(work, struct keyspan_pda_private, wakeup_work);
 	struct usb_serial_port *port = priv->port;
-
-	tty_wakeup(port->port.tty);
+	struct tty_struct *tty = tty_port_tty_get(&port->port);
+	tty_wakeup(tty);
+	tty_kref_put(tty);
 }
 
 static void keyspan_pda_request_unthrottle(struct work_struct *work)
@@ -205,7 +206,7 @@ static void keyspan_pda_request_unthrottle(struct work_struct *work)
 static void keyspan_pda_rx_interrupt(struct urb *urb)
 {
 	struct usb_serial_port *port = urb->context;
-	struct tty_struct *tty = port->port.tty;
+	struct tty_struct *tty = tty_port_tty_get(&port->port);
 	unsigned char *data = urb->transfer_buffer;
 	int retval;
 	int status = urb->status;
@@ -222,7 +223,7 @@ static void keyspan_pda_rx_interrupt(struct urb *urb)
 		/* this urb is terminated, clean up */
 		dbg("%s - urb shutting down with status: %d",
 		    __func__, status);
-		return;
+		goto out;
 	default:
 		dbg("%s - nonzero urb status received: %d",
 		    __func__, status);
@@ -261,8 +262,11 @@ static void keyspan_pda_rx_interrupt(struct urb *urb)
 exit:
 	retval = usb_submit_urb(urb, GFP_ATOMIC);
 	if (retval)
-		err("%s - usb_submit_urb failed with result %d",
-		     __func__, retval);
+		dev_err(&port->dev,
+			"%s - usb_submit_urb failed with result %d",
+			__func__, retval);
+out:
+	tty_kref_put(tty);		     
 }
 
 
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index b84dddc..ff3a07f 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -658,7 +658,7 @@ static void klsi_105_read_bulk_callback(struct urb *urb)
 	} else {
 		int bytes_sent = ((__u8 *) data)[0] +
 				 ((unsigned int) ((__u8 *) data)[1] << 8);
-		tty = port->port.tty;
+		tty = tty_port_tty_get(&port->port);
 		/* we should immediately resubmit the URB, before attempting
 		 * to pass the data on to the tty layer. But that needs locking
 		 * against re-entry an then mixed-up data because of
@@ -679,6 +679,7 @@ static void klsi_105_read_bulk_callback(struct urb *urb)
 		tty_buffer_request_room(tty, bytes_sent);
 		tty_insert_flip_string(tty, data + 2, bytes_sent);
 		tty_flip_buffer_push(tty);
+		tty_kref_put(tty);
 
 		/* again lockless, but debug info only */
 		priv->bytes_in += bytes_sent;
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index deba28ec..cfcf37c 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -383,7 +383,7 @@ static void kobil_read_int_callback(struct urb *urb)
 		return;
 	}
 
-	tty = port->port.tty;
+	tty = tty_port_tty_get(&port->port);
 	if (urb->actual_length) {
 
 		/* BEGIN DEBUG */
@@ -405,6 +405,7 @@ static void kobil_read_int_callback(struct urb *urb)
 		tty_insert_flip_string(tty, data, urb->actual_length);
 		tty_flip_buffer_push(tty);
 	}
+	tty_kref_put(tty);
 	/* someone sets the dev to 0 if the close method has been called */
 	port->interrupt_in_urb->dev = port->serial->dev;
 
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index 0ded8bd..9b2cef8 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -563,10 +563,11 @@ static void mct_u232_read_int_callback(struct urb *urb)
 	 * Work-a-round: handle the 'usual' bulk-in pipe here
 	 */
 	if (urb->transfer_buffer_length > 2) {
-		tty = port->port.tty;
+		tty = tty_port_tty_get(&port->port);
 		if (urb->actual_length) {
 			tty_insert_flip_string(tty, data, urb->actual_length);
 			tty_flip_buffer_push(tty);
+			tty_kref_put(tty);
 		}
 		goto exit;
 	}
@@ -591,7 +592,7 @@ static void mct_u232_read_int_callback(struct urb *urb)
 	 * to look in to this before committing any code.
 	 */
 	if (priv->last_lsr & MCT_U232_LSR_ERR) {
-		tty = port->port.tty;
+		tty = tty_port_tty_get(&port->port);
 		/* Overrun Error */
 		if (priv->last_lsr & MCT_U232_LSR_OE) {
 		}
@@ -604,6 +605,7 @@ static void mct_u232_read_int_callback(struct urb *urb)
 		/* Break Indicator */
 		if (priv->last_lsr & MCT_U232_LSR_BI) {
 		}
+		tty_kref_put(tty);
 	}
 #endif
 	spin_unlock_irqrestore(&priv->lock, flags);
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 7c4917d..7b538ca 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -216,12 +216,13 @@ static void mos7720_bulk_in_callback(struct urb *urb)
 
 	data = urb->transfer_buffer;
 
-	tty = port->port.tty;
+	tty = tty_port_tty_get(&port->port);
 	if (tty && urb->actual_length) {
 		tty_buffer_request_room(tty, urb->actual_length);
 		tty_insert_flip_string(tty, data, urb->actual_length);
 		tty_flip_buffer_push(tty);
 	}
+	tty_kref_put(tty);
 
 	if (!port->read_urb) {
 		dbg("URB KILLED !!!");
@@ -262,10 +263,11 @@ static void mos7720_bulk_out_data_callback(struct urb *urb)
 
 	dbg("Entering .........");
 
-	tty = mos7720_port->port->port.tty;
+	tty = tty_port_tty_get(&mos7720_port->port->port);
 
 	if (tty && mos7720_port->open)
 		tty_wakeup(tty);
+	tty_kref_put(tty);
 }
 
 /*
@@ -1267,29 +1269,6 @@ static int get_lsr_info(struct tty_struct *tty,
 	return 0;
 }
 
-/*
- * get_number_bytes_avail - get number of bytes available
- *
- * Purpose: Let user call ioctl to get the count of number of bytes available.
- */
-static int get_number_bytes_avail(struct moschip_port *mos7720_port,
-				  unsigned int __user *value)
-{
-	unsigned int result = 0;
-	struct tty_struct *tty = mos7720_port->port->port.tty;
-
-	if (!tty)
-		return -ENOIOCTLCMD;
-
-	result = tty->read_cnt;
-
-	dbg("%s(%d) = %d", __func__,  mos7720_port->port->number, result);
-	if (copy_to_user(value, &result, sizeof(int)))
-		return -EFAULT;
-
-	return -ENOIOCTLCMD;
-}
-
 static int set_modem_info(struct moschip_port *mos7720_port, unsigned int cmd,
 			  unsigned int __user *value)
 {
@@ -1409,13 +1388,6 @@ static int mos7720_ioctl(struct tty_struct *tty, struct file *file,
 	dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd);
 
 	switch (cmd) {
-	case TIOCINQ:
-		/* return number of bytes available */
-		dbg("%s (%d) TIOCINQ", __func__,  port->number);
-		return get_number_bytes_avail(mos7720_port,
-					      (unsigned int __user *)arg);
-		break;
-
 	case TIOCSERGETLSR:
 		dbg("%s (%d) TIOCSERGETLSR", __func__,  port->number);
 		return get_lsr_info(tty, mos7720_port,
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 09d8206..60543d7 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -709,12 +709,13 @@ static void mos7840_bulk_in_callback(struct urb *urb)
 	dbg("%s", "Entering ........... \n");
 
 	if (urb->actual_length) {
-		tty = mos7840_port->port->port.tty;
+		tty = tty_port_tty_get(&mos7840_port->port->port);
 		if (tty) {
 			tty_buffer_request_room(tty, urb->actual_length);
 			tty_insert_flip_string(tty, data, urb->actual_length);
 			dbg(" %s \n", data);
 			tty_flip_buffer_push(tty);
+			tty_kref_put(tty);
 		}
 		mos7840_port->icount.rx += urb->actual_length;
 		smp_wmb();
@@ -773,10 +774,10 @@ static void mos7840_bulk_out_data_callback(struct urb *urb)
 
 	dbg("%s \n", "Entering .........");
 
-	tty = mos7840_port->port->port.tty;
-
+	tty = tty_port_tty_get(&mos7840_port->port->port);
 	if (tty && mos7840_port->open)
 		tty_wakeup(tty);
+	tty_kref_put(tty);
 
 }
 
diff --git a/drivers/usb/serial/navman.c b/drivers/usb/serial/navman.c
index d673653..bcdcbb8 100644
--- a/drivers/usb/serial/navman.c
+++ b/drivers/usb/serial/navman.c
@@ -64,12 +64,13 @@ static void navman_read_int_callback(struct urb *urb)
 	usb_serial_debug_data(debug, &port->dev, __func__,
 			      urb->actual_length, data);
 
-	tty = port->port.tty;
+	tty = tty_port_tty_get(&port->port);
 	if (tty && urb->actual_length) {
 		tty_buffer_request_room(tty, urb->actual_length);
 		tty_insert_flip_string(tty, data, urb->actual_length);
 		tty_flip_buffer_push(tty);
 	}
+	tty_kref_put(tty);
 
 exit:
 	result = usb_submit_urb(urb, GFP_ATOMIC);
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index ae8e227..c4d70b0 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -172,7 +172,7 @@ static int omninet_open(struct tty_struct *tty,
 	dbg("%s - port %d", __func__, port->number);
 
 	wport = serial->port[1];
-	wport->port.tty = tty;		/* FIXME */
+	tty_port_tty_set(&wport->port, tty);
 
 	/* Start reading from the device */
 	usb_fill_bulk_urb(port->read_urb, serial->dev,
@@ -229,9 +229,11 @@ static void omninet_read_bulk_callback(struct urb *urb)
 	}
 
 	if (urb->actual_length && header->oh_len) {
-		tty_insert_flip_string(port->port.tty,
-			data + OMNINET_DATAOFFSET, header->oh_len);
-		tty_flip_buffer_push(port->port.tty);
+		struct tty_struct *tty = tty_port_tty_get(&port->port);
+		tty_insert_flip_string(tty, data + OMNINET_DATAOFFSET,
+							header->oh_len);
+		tty_flip_buffer_push(tty);
+		tty_kref_put(tty);
 	}
 
 	/* Continue trying to always read  */
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 73f8277..6b1727e 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -571,14 +571,14 @@ static void option_indat_callback(struct urb *urb)
 		dbg("%s: nonzero status: %d on endpoint %02x.",
 		    __func__, status, endpoint);
 	} else {
-		tty = port->port.tty;
+		tty = tty_port_tty_get(&port->port);
 		if (urb->actual_length) {
 			tty_buffer_request_room(tty, urb->actual_length);
 			tty_insert_flip_string(tty, data, urb->actual_length);
 			tty_flip_buffer_push(tty);
-		} else {
+		} else 
 			dbg("%s: empty read urb received", __func__);
-		}
+		tty_kref_put(tty);
 
 		/* Resubmit urb so we continue receiving */
 		if (port->port.count && status != -ESHUTDOWN) {
@@ -647,9 +647,13 @@ static void option_instat_callback(struct urb *urb)
 			portdata->dsr_state = ((signals & 0x02) ? 1 : 0);
 			portdata->ri_state = ((signals & 0x08) ? 1 : 0);
 
-			if (port->port.tty && !C_CLOCAL(port->port.tty) &&
-					old_dcd_state && !portdata->dcd_state)
-				tty_hangup(port->port.tty);
+			if (old_dcd_state && !portdata->dcd_state) {
+				struct tty_struct *tty =
+						tty_port_tty_get(&port->port);
+				if (tty && !C_CLOCAL(tty))
+					tty_hangup(tty);
+				tty_kref_put(tty);
+			}
 		} else {
 			dbg("%s: type %x req %x", __func__,
 				req_pkt->bRequestType, req_pkt->bRequest);
@@ -793,7 +797,7 @@ static void option_close(struct tty_struct *tty,
 		for (i = 0; i < N_OUT_URB; i++)
 			usb_kill_urb(portdata->out_urbs[i]);
 	}
-	port->port.tty = NULL;	/* FIXME */
+	tty_port_tty_set(&port->port, NULL);
 }
 
 /* Helper functions used by option_setup_urbs */
diff --git a/drivers/usb/serial/oti6858.c b/drivers/usb/serial/oti6858.c
index 42f9281..ba551f0 100644
--- a/drivers/usb/serial/oti6858.c
+++ b/drivers/usb/serial/oti6858.c
@@ -998,11 +998,12 @@ static void oti6858_read_bulk_callback(struct urb *urb)
 		return;
 	}
 
-	tty = port->port.tty;
+	tty = tty_port_tty_get(&port->port);
 	if (tty != NULL && urb->actual_length > 0) {
 		tty_insert_flip_string(tty, data, urb->actual_length);
 		tty_flip_buffer_push(tty);
 	}
+	tty_kref_put(tty);
 
 	/* schedule the interrupt urb if we are still open */
 	if (port->port.count != 0) {
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 8d600689..9084378 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -1046,7 +1046,7 @@ static void pl2303_read_bulk_callback(struct urb *urb)
 		tty_flag = TTY_FRAME;
 	dbg("%s - tty_flag = %d", __func__, tty_flag);
 
-	tty = port->port.tty;
+	tty = tty_port_tty_get(&port->port);
 	if (tty && urb->actual_length) {
 		tty_buffer_request_room(tty, urb->actual_length + 1);
 		/* overrun is special, not associated with a char */
@@ -1056,7 +1056,7 @@ static void pl2303_read_bulk_callback(struct urb *urb)
 			tty_insert_flip_char(tty, data[i], tty_flag);
 		tty_flip_buffer_push(tty);
 	}
-
+	tty_kref_put(tty);
 	/* Schedule the next read _if_ we are still open */
 	if (port->port.count) {
 		urb->dev = port->serial->dev;
diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c
index def52d0..72903ac 100644
--- a/drivers/usb/serial/safe_serial.c
+++ b/drivers/usb/serial/safe_serial.c
@@ -217,6 +217,7 @@ static void safe_read_bulk_callback(struct urb *urb)
 	struct usb_serial_port *port =  urb->context;
 	unsigned char *data = urb->transfer_buffer;
 	unsigned char length = urb->actual_length;
+	struct tty_struct *tty;
 	int result;
 	int status = urb->status;
 
@@ -242,6 +243,7 @@ static void safe_read_bulk_callback(struct urb *urb)
 		printk("\n");
 	}
 #endif
+	tty = tty_port_tty_get(&port->port);
 	if (safe) {
 		__u16 fcs;
 		fcs = fcs_compute10(data, length, CRC10_INITFCS);
@@ -250,9 +252,9 @@ static void safe_read_bulk_callback(struct urb *urb)
 			if (actual_length <= (length - 2)) {
 				info("%s - actual: %d", __func__,
 							actual_length);
-				tty_insert_flip_string(port->port.tty,
+				tty_insert_flip_string(tty,
 							data, actual_length);
-				tty_flip_buffer_push(port->port.tty);
+				tty_flip_buffer_push(tty);
 			} else {
 				err("%s - inconsistent lengths %d:%d",
 					__func__, actual_length, length);
@@ -261,9 +263,10 @@ static void safe_read_bulk_callback(struct urb *urb)
 			err("%s - bad CRC %x", __func__, fcs);
 		}
 	} else {
-		tty_insert_flip_string(port->port.tty, data, length);
-		tty_flip_buffer_push(port->port.tty);
+		tty_insert_flip_string(tty, data, length);
+		tty_flip_buffer_push(tty);
 	}
+	tty_kref_put(tty);
 
 	/* Continue trying to always read  */
 	usb_fill_bulk_urb(urb, port->serial->dev,
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index ea1a103..8b9eaf3 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -440,14 +440,14 @@ static void sierra_indat_callback(struct urb *urb)
 		dbg("%s: nonzero status: %d on endpoint %02x.",
 		    __func__, status, endpoint);
 	} else {
-		tty = port->port.tty;
 		if (urb->actual_length) {
+		tty = tty_port_tty_get(&port->port);
 			tty_buffer_request_room(tty, urb->actual_length);
 			tty_insert_flip_string(tty, data, urb->actual_length);
 			tty_flip_buffer_push(tty);
-		} else {
+			tty_kref_put(tty);
+		} else
 			dbg("%s: empty read urb received", __func__);
-		}
 
 		/* Resubmit urb so we continue receiving */
 		if (port->port.count && status != -ESHUTDOWN) {
@@ -485,6 +485,7 @@ static void sierra_instat_callback(struct urb *urb)
 			unsigned char signals = *((unsigned char *)
 					urb->transfer_buffer +
 					sizeof(struct usb_ctrlrequest));
+			struct tty_struct *tty;
 
 			dbg("%s: signal x%x", __func__, signals);
 
@@ -494,9 +495,11 @@ static void sierra_instat_callback(struct urb *urb)
 			portdata->dsr_state = ((signals & 0x02) ? 1 : 0);
 			portdata->ri_state = ((signals & 0x08) ? 1 : 0);
 
-			if (port->port.tty && !C_CLOCAL(port->port.tty) &&
+			tty = tty_port_tty_get(&port->port);
+			if (tty && !C_CLOCAL(tty) &&
 					old_dcd_state && !portdata->dcd_state)
-				tty_hangup(port->port.tty);
+				tty_hangup(tty);
+			tty_kref_put(tty);
 		} else {
 			dbg("%s: type %x req %x", __func__,
 				req_pkt->bRequestType, req_pkt->bRequest);
@@ -616,8 +619,7 @@ static void sierra_close(struct tty_struct *tty,
 	}
 
 	usb_kill_urb(port->interrupt_in_urb);
-
-	port->port.tty = NULL;	/* FIXME */
+	tty_port_tty_set(&port->port, NULL);
 }
 
 static int sierra_startup(struct usb_serial *serial)
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index 283cf6b..1533d6e 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -755,7 +755,7 @@ static void spcp8x5_read_bulk_callback(struct urb *urb)
 		tty_flag = TTY_FRAME;
 	dev_dbg(&port->dev, "tty_flag = %d\n", tty_flag);
 
-	tty = port->port.tty;
+	tty = tty_port_tty_get(&port->port);
 	if (tty && urb->actual_length) {
 		tty_buffer_request_room(tty, urb->actual_length + 1);
 		/* overrun is special, not associated with a char */
@@ -765,6 +765,7 @@ static void spcp8x5_read_bulk_callback(struct urb *urb)
 			tty_insert_flip_char(tty, data[i], tty_flag);
 		tty_flip_buffer_push(tty);
 	}
+	tty_kref_put(tty);
 
 	/* Schedule the next read _if_ we are still open */
 	if (port->port.count) {
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index 9a3e495..c90237d 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -179,7 +179,7 @@ static int ti_set_mcr(struct ti_port *tport, unsigned int mcr);
 static int ti_get_lsr(struct ti_port *tport);
 static int ti_get_serial_info(struct ti_port *tport,
 	struct serial_struct __user *ret_arg);
-static int ti_set_serial_info(struct ti_port *tport,
+static int ti_set_serial_info(struct tty_struct *tty, struct ti_port *tport,
 	struct serial_struct __user *new_arg);
 static void ti_handle_new_msr(struct ti_port *tport, __u8 msr);
 
@@ -857,8 +857,8 @@ static int ti_ioctl(struct tty_struct *tty, struct file *file,
 				(struct serial_struct __user *)arg);
 	case TIOCSSERIAL:
 		dbg("%s - (%d) TIOCSSERIAL", __func__, port->number);
-		return ti_set_serial_info(tport,
-					(struct serial_struct __user *)arg);
+		return ti_set_serial_info(tty, tport,
+				(struct serial_struct __user *)arg);
 	case TIOCMIWAIT:
 		dbg("%s - (%d) TIOCMIWAIT", __func__, port->number);
 		cprev = tport->tp_icount;
@@ -1211,6 +1211,7 @@ static void ti_bulk_in_callback(struct urb *urb)
 	struct device *dev = &urb->dev->dev;
 	int status = urb->status;
 	int retval = 0;
+	struct tty_struct *tty;
 
 	dbg("%s", __func__);
 
@@ -1239,20 +1240,22 @@ static void ti_bulk_in_callback(struct urb *urb)
 		return;
 	}
 
-	if (port->port.tty && urb->actual_length) {
+	tty = tty_port_tty_get(&port->port);
+	if (tty && urb->actual_length) {
 		usb_serial_debug_data(debug, dev, __func__,
 			urb->actual_length, urb->transfer_buffer);
 
 		if (!tport->tp_is_open)
 			dbg("%s - port closed, dropping data", __func__);
 		else
-			ti_recv(&urb->dev->dev, port->port.tty,
+			ti_recv(&urb->dev->dev, tty,
 						urb->transfer_buffer,
 						urb->actual_length);
 
 		spin_lock(&tport->tp_lock);
 		tport->tp_icount.rx += urb->actual_length;
 		spin_unlock(&tport->tp_lock);
+		tty_kref_put(tty);
 	}
 
 exit:
@@ -1330,7 +1333,7 @@ static void ti_send(struct ti_port *tport)
 {
 	int count, result;
 	struct usb_serial_port *port = tport->tp_port;
-	struct tty_struct *tty = port->port.tty;	/* FIXME */
+	struct tty_struct *tty = tty_port_tty_get(&port->port);	/* FIXME */
 	unsigned long flags;
 
 
@@ -1338,19 +1341,15 @@ static void ti_send(struct ti_port *tport)
 
 	spin_lock_irqsave(&tport->tp_lock, flags);
 
-	if (tport->tp_write_urb_in_use) {
-		spin_unlock_irqrestore(&tport->tp_lock, flags);
-		return;
-	}
+	if (tport->tp_write_urb_in_use)
+		goto unlock;
 
 	count = ti_buf_get(tport->tp_write_buf,
 				port->write_urb->transfer_buffer,
 				port->bulk_out_size);
 
-	if (count == 0) {
-		spin_unlock_irqrestore(&tport->tp_lock, flags);
-		return;
-	}
+	if (count == 0)
+		goto unlock;
 
 	tport->tp_write_urb_in_use = 1;
 
@@ -1380,7 +1379,13 @@ static void ti_send(struct ti_port *tport)
 	/* more room in the buffer for new writes, wakeup */
 	if (tty)
 		tty_wakeup(tty);
+	tty_kref_put(tty);
 	wake_up_interruptible(&tport->tp_write_wait);
+	return;
+unlock:
+	spin_unlock_irqrestore(&tport->tp_lock, flags);
+	tty_kref_put(tty);
+	return;
 }
 
 
@@ -1464,20 +1469,16 @@ static int ti_get_serial_info(struct ti_port *tport,
 }
 
 
-static int ti_set_serial_info(struct ti_port *tport,
+static int ti_set_serial_info(struct tty_struct *tty, struct ti_port *tport,
 	struct serial_struct __user *new_arg)
 {
-	struct usb_serial_port *port = tport->tp_port;
 	struct serial_struct new_serial;
 
 	if (copy_from_user(&new_serial, new_arg, sizeof(new_serial)))
 		return -EFAULT;
 
 	tport->tp_flags = new_serial.flags & TI_SET_SERIAL_FLAGS;
-	/* FIXME */
-	if (port->port.tty)
-		port->port.tty->low_latency =
-			(tport->tp_flags & ASYNC_LOW_LATENCY) ? 1 : 0;
+	tty->low_latency = (tport->tp_flags & ASYNC_LOW_LATENCY) ? 1 : 0;
 	tport->tp_closing_wait = new_serial.closing_wait;
 
 	return 0;
@@ -1510,7 +1511,7 @@ static void ti_handle_new_msr(struct ti_port *tport, __u8 msr)
 	tport->tp_msr = msr & TI_MSR_MASK;
 
 	/* handle CTS flow control */
-	tty = tport->tp_port->port.tty;
+	tty = tty_port_tty_get(&tport->tp_port->port);
 	if (tty && C_CRTSCTS(tty)) {
 		if (msr & TI_MSR_CTS) {
 			tty->hw_stopped = 0;
@@ -1519,6 +1520,7 @@ static void ti_handle_new_msr(struct ti_port *tport, __u8 msr)
 			tty->hw_stopped = 1;
 		}
 	}
+	tty_kref_put(tty);
 }
 
 
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 4f7f9e3..e7d4246 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -214,7 +214,7 @@ static int serial_open (struct tty_struct *tty, struct file *filp)
 	/* set up our port structure making the tty driver
 	 * remember our port object, and us it */
 	tty->driver_data = port;
-	port->port.tty = tty;
+	tty_port_tty_set(&port->port, tty);
 
 	if (port->port.count == 1) {
 
@@ -246,7 +246,7 @@ bailout_module_put:
 bailout_mutex_unlock:
 	port->port.count = 0;
 	tty->driver_data = NULL;
-	port->port.tty = NULL;
+	tty_port_tty_set(&port->port, NULL);
 	mutex_unlock(&port->mutex);
 bailout_kref_put:
 	usb_serial_put(serial);
@@ -276,10 +276,11 @@ static void serial_close(struct tty_struct *tty, struct file *filp)
 		port->serial->type->close(tty, port, filp);
 
 	if (port->port.count == (port->console? 1 : 0)) {
-		if (port->port.tty) {
-			if (port->port.tty->driver_data)
-				port->port.tty->driver_data = NULL;
-			port->port.tty = NULL;
+		struct tty_struct *tty = tty_port_tty_get(&port->port);
+		if (tty) {
+			if (tty->driver_data)
+				tty->driver_data = NULL;
+			tty_port_tty_set(&port->port, NULL);
 		}
 	}
 
@@ -508,11 +509,12 @@ static void usb_serial_port_work(struct work_struct *work)
 	if (!port)
 		return;
 
-	tty = port->port.tty;
+	tty = tty_port_tty_get(&port->port);
 	if (!tty)
 		return;
 
 	tty_wakeup(tty);
+	tty_kref_put(tty);
 }
 
 static void port_release(struct device *dev)
@@ -819,6 +821,7 @@ int usb_serial_probe(struct usb_interface *interface,
 		port = kzalloc(sizeof(struct usb_serial_port), GFP_KERNEL);
 		if (!port)
 			goto probe_error;
+		tty_port_init(&port->port);
 		port->serial = serial;
 		spin_lock_init(&port->lock);
 		mutex_init(&port->mutex);
@@ -1040,8 +1043,11 @@ void usb_serial_disconnect(struct usb_interface *interface)
 	for (i = 0; i < serial->num_ports; ++i) {
 		port = serial->port[i];
 		if (port) {
-			if (port->port.tty)
-				tty_hangup(port->port.tty);
+			struct tty_struct *tty = tty_port_tty_get(&port->port);
+			if (tty) {
+				tty_hangup(tty);
+				tty_kref_put(tty);
+			}
 			kill_traffic(port);
 		}
 	}
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index cf8924f..a6d1c75 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -499,7 +499,7 @@ static void visor_read_bulk_callback(struct urb *urb)
 	int status = urb->status;
 	struct tty_struct *tty;
 	int result;
-	int available_room;
+	int available_room = 0;
 
 	dbg("%s - port %d", __func__, port->number);
 
@@ -512,13 +512,17 @@ static void visor_read_bulk_callback(struct urb *urb)
 	usb_serial_debug_data(debug, &port->dev, __func__,
 						urb->actual_length, data);
 
-	tty = port->port.tty;
-	if (tty && urb->actual_length) {
-		available_room = tty_buffer_request_room(tty,
+	if (urb->actual_length) {
+		tty = tty_port_tty_get(&port->port);
+		if (tty) {
+			available_room = tty_buffer_request_room(tty,
 							urb->actual_length);
-		if (available_room) {
-			tty_insert_flip_string(tty, data, available_room);
-			tty_flip_buffer_push(tty);
+			if (available_room) {
+				tty_insert_flip_string(tty, data,
+							available_room);
+				tty_flip_buffer_push(tty);
+			}
+			tty_kref_put(tty);
 		}
 		spin_lock(&priv->lock);
 		priv->bytes_in += available_room;
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 3a9d143..11c8b97 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -1481,7 +1481,7 @@ static void rx_data_softint(struct work_struct *work)
 	struct whiteheat_private *info =
 		container_of(work, struct whiteheat_private, rx_work);
 	struct usb_serial_port *port = info->port;
-	struct tty_struct *tty = port->port.tty;
+	struct tty_struct *tty = tty_port_tty_get(&port->port);
 	struct whiteheat_urb_wrap *wrap;
 	struct urb *urb;
 	unsigned long flags;
@@ -1493,7 +1493,7 @@ static void rx_data_softint(struct work_struct *work)
 	spin_lock_irqsave(&info->lock, flags);
 	if (info->flags & THROTTLED) {
 		spin_unlock_irqrestore(&info->lock, flags);
-		return;
+		goto out;
 	}
 
 	list_for_each_safe(tmp, tmp2, &info->rx_urb_q) {
@@ -1513,7 +1513,7 @@ static void rx_data_softint(struct work_struct *work)
 				spin_unlock_irqrestore(&info->lock, flags);
 				tty_flip_buffer_push(tty);
 				schedule_work(&info->rx_work);
-				return;
+				goto out;
 			}
 			tty_insert_flip_string(tty, urb->transfer_buffer, len);
 			sent += len;
@@ -1536,6 +1536,8 @@ static void rx_data_softint(struct work_struct *work)
 
 	if (sent)
 		tty_flip_buffer_push(tty);
+out:
+	tty_kref_put(tty);
 }
 
 
-- 
cgit v1.1


From b064eca9b0cdbb2b8f731ae2e44fa02194a1219a Mon Sep 17 00:00:00 2001
From: Dan Williams <dcbw@redhat.com>
Date: Wed, 24 Sep 2008 11:49:19 -0400
Subject: USB: option: add Ericsson F3507g and Dell 5530

Add a few more mobile broadband cards.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/serial/option.c | 6 ++++++
 1 file changed, 6 insertions(+)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 6b1727e..2d728e8 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -220,6 +220,10 @@ static int  option_send_setup(struct tty_struct *tty, struct usb_serial_port *po
 #define ZTE_PRODUCT_MF628			0x0015
 #define ZTE_PRODUCT_CDMA_TECH			0xfffe
 
+/* Ericsson products */
+#define ERICSSON_VENDOR_ID			0x0bdb
+#define ERICSSON_PRODUCT_F3507G			0x1900
+
 static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
@@ -318,6 +322,7 @@ static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(DELL_VENDOR_ID, 0x8136) },	/* Dell Wireless HSDPA 5520 == Novatel Expedite EU860D */
 	{ USB_DEVICE(DELL_VENDOR_ID, 0x8137) },	/* Dell Wireless HSDPA 5520 */
 	{ USB_DEVICE(DELL_VENDOR_ID, 0x8138) },	/* Dell Wireless 5520 Voda I Mobile Broadband (3G HSDPA) Minicard */
+	{ USB_DEVICE(DELL_VENDOR_ID, 0x8147) },	/* Dell Wireless 5530 Mobile Broadband (3G HSPA) Mini-Card */
 	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) },
 	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) },
 	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) },
@@ -349,6 +354,7 @@ static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) },
 	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) },
 	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) },
+	{ USB_DEVICE(ERICSSON_VENDOR_ID, ERICSSON_PRODUCT_F3507G) },
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);
-- 
cgit v1.1


From 631556a0763ac155c82bbcbeed7e4b28bd737927 Mon Sep 17 00:00:00 2001
From: Denis Joseph Barrow <D.Barow@option.com>
Date: Tue, 30 Sep 2008 16:49:22 +0200
Subject: USB: option.c remove duplicate device ids now supported in hso.c

Remove duplicate device ids which are now supported by drivers/usb/net/hso.c

Signed-off-by: Denis Joseph Barrow <D.Barow@option.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/serial/option.c | 22 ----------------------
 1 file changed, 22 deletions(-)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 2d728e8..fa8ec3a 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -79,27 +79,16 @@ static int  option_send_setup(struct tty_struct *tty, struct usb_serial_port *po
 #define OPTION_PRODUCT_VIPER			0x6600
 #define OPTION_PRODUCT_VIPER_BUS		0x6601
 #define OPTION_PRODUCT_GT_MAX_READY		0x6701
-#define OPTION_PRODUCT_GT_MAX			0x6711
 #define OPTION_PRODUCT_FUJI_MODEM_LIGHT		0x6721
 #define OPTION_PRODUCT_FUJI_MODEM_GT		0x6741
 #define OPTION_PRODUCT_FUJI_MODEM_EX		0x6761
-#define OPTION_PRODUCT_FUJI_NETWORK_LIGHT	0x6731
-#define OPTION_PRODUCT_FUJI_NETWORK_GT		0x6751
-#define OPTION_PRODUCT_FUJI_NETWORK_EX		0x6771
 #define OPTION_PRODUCT_KOI_MODEM		0x6800
-#define OPTION_PRODUCT_KOI_NETWORK		0x6811
 #define OPTION_PRODUCT_SCORPION_MODEM		0x6901
-#define OPTION_PRODUCT_SCORPION_NETWORK		0x6911
 #define OPTION_PRODUCT_ETNA_MODEM		0x7001
-#define OPTION_PRODUCT_ETNA_NETWORK		0x7011
 #define OPTION_PRODUCT_ETNA_MODEM_LITE		0x7021
 #define OPTION_PRODUCT_ETNA_MODEM_GT		0x7041
 #define OPTION_PRODUCT_ETNA_MODEM_EX		0x7061
-#define OPTION_PRODUCT_ETNA_NETWORK_LITE	0x7031
-#define OPTION_PRODUCT_ETNA_NETWORK_GT		0x7051
-#define OPTION_PRODUCT_ETNA_NETWORK_EX		0x7071
 #define OPTION_PRODUCT_ETNA_KOI_MODEM		0x7100
-#define OPTION_PRODUCT_ETNA_KOI_NETWORK		0x7111
 
 #define HUAWEI_VENDOR_ID			0x12D1
 #define HUAWEI_PRODUCT_E600			0x1001
@@ -239,27 +228,16 @@ static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_VIPER) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_VIPER_BUS) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_GT_MAX_READY) },
-	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_GT_MAX) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUJI_MODEM_LIGHT) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUJI_MODEM_GT) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUJI_MODEM_EX) },
-	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUJI_NETWORK_LIGHT) },
-	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUJI_NETWORK_GT) },
-	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_FUJI_NETWORK_EX) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_KOI_MODEM) },
-	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_KOI_NETWORK) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_SCORPION_MODEM) },
-	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_SCORPION_NETWORK) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM) },
-	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_NETWORK) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_LITE) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_GT) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_EX) },
-	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_NETWORK_LITE) },
-	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_NETWORK_GT) },
-	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_NETWORK_EX) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_MODEM) },
-	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_NETWORK) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220BIS, 0xff, 0xff, 0xff) },
-- 
cgit v1.1


From c3d36c453c84554eb12941b3f98abf4fefec000a Mon Sep 17 00:00:00 2001
From: Vladimir Vukicevic <vladimir@pobox.com>
Date: Fri, 3 Oct 2008 17:08:43 -0700
Subject: USB: Add Oceanic product ID to ftdi_sio

Add Oceanic PID to ftdi_sio driver

Oceanic dive computers (such as the VT3 --
http://www.oceanicworldwide.com/p_computers_vt3.html) all use an onboard
FTDI serial converter, with the FTDI vid and a  PID of 0xf460.  The
attached patch adds that pid to ftdi_sio; driver  connects to my VT3
after that.

Signed-off-by: Vladimir Vukicevic <vladimir@pobox.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/serial/ftdi_sio.c | 1 +
 drivers/usb/serial/ftdi_sio.h | 5 +++++
 2 files changed, 6 insertions(+)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index c2ac129..ef3dc1a 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -578,6 +578,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(FALCOM_VID, FALCOM_TWIST_PID) },
 	{ USB_DEVICE(FALCOM_VID, FALCOM_SAMBA_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_SUUNTO_SPORTS_PID) },
+	{ USB_DEVICE(FTDI_VID, FTDI_OCEANIC_PID) },
 	{ USB_DEVICE(TTI_VID, TTI_QL355P_PID) },
 	{ USB_DEVICE(FTDI_VID, FTDI_RM_CANVIEW_PID) },
 	{ USB_DEVICE(BANDB_VID, BANDB_USOTL4_PID) },
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index 8a5b6df..07a3992 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -628,6 +628,11 @@
 #define FTDI_SUUNTO_SPORTS_PID	0xF680	/* Suunto Sports instrument */
 
 /*
+ * Oceanic product ids
+ */
+#define FTDI_OCEANIC_PID	0xF460  /* Oceanic dive instrument */
+
+/*
  * TTi (Thurlby Thandar Instruments)
  */
 #define TTI_VID			0x103E	/* Vendor Id */
-- 
cgit v1.1


From 682650437e7acef01e914a7fb6ef16da16bb69c5 Mon Sep 17 00:00:00 2001
From: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
Date: Wed, 10 Sep 2008 17:18:46 +0300
Subject: USB: ftdi_sio: fix 'product' parameter description

Signed-off-by: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/serial/ftdi_sio.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index ef3dc1a..89dab5c 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -2459,5 +2459,5 @@ module_param(vendor, ushort, 0);
 MODULE_PARM_DESC(vendor, "User specified vendor ID (default="
 		__MODULE_STRING(FTDI_VID)")");
 module_param(product, ushort, 0);
-MODULE_PARM_DESC(vendor, "User specified product ID");
+MODULE_PARM_DESC(product, "User specified product ID");
 
-- 
cgit v1.1


From 7384a922b5a716b4e9dbcdce738f2b2104892008 Mon Sep 17 00:00:00 2001
From: Kevin Lloyd <klloyd@sierrawireless.com>
Date: Tue, 16 Sep 2008 21:05:24 -0700
Subject: USB Serial: Sierra: debug message fix

This patch moves dbg calls to dev_dbg where possible. It also fixes some
issues with a previous submission aiming to do the same thing.

Signed-off-by: Kevin Lloyd <klloyd@sierrawireless.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/serial/sierra.c | 69 +++++++++++++++++++++++++--------------------
 1 file changed, 38 insertions(+), 31 deletions(-)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 8b9eaf3..6794e57 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -247,7 +247,7 @@ static int sierra_send_setup(struct tty_struct *tty,
 	struct sierra_port_private *portdata;
 	__u16 interface = 0;
 
-	dbg("%s", __func__);
+	dev_dbg(&port->dev, "%s", __func__);
 
 	portdata = usb_get_serial_port_data(port);
 
@@ -284,7 +284,7 @@ static int sierra_send_setup(struct tty_struct *tty,
 static void sierra_set_termios(struct tty_struct *tty,
 		struct usb_serial_port *port, struct ktermios *old_termios)
 {
-	dbg("%s", __func__);
+	dev_dbg(&port->dev, "%s", __func__);
 	tty_termios_copy_hw(tty->termios, old_termios);
 	sierra_send_setup(tty, port);
 }
@@ -295,6 +295,7 @@ static int sierra_tiocmget(struct tty_struct *tty, struct file *file)
 	unsigned int value;
 	struct sierra_port_private *portdata;
 
+	dev_dbg(&port->dev, "%s", __func__);
 	portdata = usb_get_serial_port_data(port);
 
 	value = ((portdata->rts_state) ? TIOCM_RTS : 0) |
@@ -334,14 +335,14 @@ static void sierra_outdat_callback(struct urb *urb)
 	int status = urb->status;
 	unsigned long flags;
 
-	dbg("%s - port %d", __func__, port->number);
+	dev_dbg(&port->dev, "%s - port %d", __func__, port->number);
 
 	/* free up the transfer buffer, as usb_free_urb() does not do this */
 	kfree(urb->transfer_buffer);
 
 	if (status)
-		dbg("%s - nonzero write bulk status received: %d",
-		    __func__, status);
+		dev_dbg(&port->dev, "%s - nonzero write bulk status "
+		    "received: %d", __func__, status);
 
 	spin_lock_irqsave(&portdata->lock, flags);
 	--portdata->outstanding_urbs;
@@ -363,12 +364,12 @@ static int sierra_write(struct tty_struct *tty, struct usb_serial_port *port,
 
 	portdata = usb_get_serial_port_data(port);
 
-	dbg("%s: write (%d chars)", __func__, count);
+	dev_dbg(&port->dev, "%s: write (%d chars)", __func__, count);
 
 	spin_lock_irqsave(&portdata->lock, flags);
 	if (portdata->outstanding_urbs > N_OUT_URB) {
 		spin_unlock_irqrestore(&portdata->lock, flags);
-		dbg("%s - write limit hit\n", __func__);
+		dev_dbg(&port->dev, "%s - write limit hit\n", __func__);
 		return 0;
 	}
 	portdata->outstanding_urbs++;
@@ -437,8 +438,8 @@ static void sierra_indat_callback(struct urb *urb)
 	port =  urb->context;
 
 	if (status) {
-		dbg("%s: nonzero status: %d on endpoint %02x.",
-		    __func__, status, endpoint);
+		dev_dbg(&port->dev, "%s: nonzero status: %d on"
+		    " endpoint %02x.", __func__, status, endpoint);
 	} else {
 		if (urb->actual_length) {
 		tty = tty_port_tty_get(&port->port);
@@ -447,7 +448,8 @@ static void sierra_indat_callback(struct urb *urb)
 			tty_flip_buffer_push(tty);
 			tty_kref_put(tty);
 		} else
-			dbg("%s: empty read urb received", __func__);
+			dev_dbg(&port->dev, "%s: empty read urb"
+				" received", __func__);
 
 		/* Resubmit urb so we continue receiving */
 		if (port->port.count && status != -ESHUTDOWN) {
@@ -468,15 +470,17 @@ static void sierra_instat_callback(struct urb *urb)
 	struct sierra_port_private *portdata = usb_get_serial_port_data(port);
 	struct usb_serial *serial = port->serial;
 
-	dbg("%s", __func__);
-	dbg("%s: urb %p port %p has data %p", __func__, urb, port, portdata);
+	dev_dbg(&port->dev, "%s", __func__);
+	dev_dbg(&port->dev, "%s: urb %p port %p has data %p", __func__,
+		urb, port, portdata);
 
 	if (status == 0) {
 		struct usb_ctrlrequest *req_pkt =
 				(struct usb_ctrlrequest *)urb->transfer_buffer;
 
 		if (!req_pkt) {
-			dbg("%s: NULL req_pkt\n", __func__);
+			dev_dbg(&port->dev, "%s: NULL req_pkt\n",
+				__func__);
 			return;
 		}
 		if ((req_pkt->bRequestType == 0xA1) &&
@@ -487,7 +491,8 @@ static void sierra_instat_callback(struct urb *urb)
 					sizeof(struct usb_ctrlrequest));
 			struct tty_struct *tty;
 
-			dbg("%s: signal x%x", __func__, signals);
+			dev_dbg(&port->dev, "%s: signal x%x", __func__,
+				signals);
 
 			old_dcd_state = portdata->dcd_state;
 			portdata->cts_state = 1;
@@ -501,19 +506,20 @@ static void sierra_instat_callback(struct urb *urb)
 				tty_hangup(tty);
 			tty_kref_put(tty);
 		} else {
-			dbg("%s: type %x req %x", __func__,
-				req_pkt->bRequestType, req_pkt->bRequest);
+			dev_dbg(&port->dev, "%s: type %x req %x",
+				__func__, req_pkt->bRequestType,
+				req_pkt->bRequest);
 		}
 	} else
-		dbg("%s: error %d", __func__, status);
+		dev_dbg(&port->dev, "%s: error %d", __func__, status);
 
 	/* Resubmit urb so we continue receiving IRQ data */
 	if (status != -ESHUTDOWN) {
 		urb->dev = serial->dev;
 		err = usb_submit_urb(urb, GFP_ATOMIC);
 		if (err)
-			dbg("%s: resubmit intr urb failed. (%d)",
-				__func__, err);
+			dev_dbg(&port->dev, "%s: resubmit intr urb "
+				"failed. (%d)",	__func__, err);
 	}
 }
 
@@ -523,14 +529,14 @@ static int sierra_write_room(struct tty_struct *tty)
 	struct sierra_port_private *portdata = usb_get_serial_port_data(port);
 	unsigned long flags;
 
-	dbg("%s - port %d", __func__, port->number);
+	dev_dbg(&port->dev, "%s - port %d", __func__, port->number);
 
 	/* try to give a good number back based on if we have any free urbs at
 	 * this point in time */
 	spin_lock_irqsave(&portdata->lock, flags);
 	if (portdata->outstanding_urbs > N_OUT_URB * 2 / 3) {
 		spin_unlock_irqrestore(&portdata->lock, flags);
-		dbg("%s - write limit hit\n", __func__);
+		dev_dbg(&port->dev, "%s - write limit hit\n", __func__);
 		return 0;
 	}
 	spin_unlock_irqrestore(&portdata->lock, flags);
@@ -549,7 +555,7 @@ static int sierra_open(struct tty_struct *tty,
 
 	portdata = usb_get_serial_port_data(port);
 
-	dbg("%s", __func__);
+	dev_dbg(&port->dev, "%s", __func__);
 
 	/* Set some sane defaults */
 	portdata->rts_state = 1;
@@ -561,8 +567,8 @@ static int sierra_open(struct tty_struct *tty,
 		if (!urb)
 			continue;
 		if (urb->dev != serial->dev) {
-			dbg("%s: dev %p != %p", __func__,
-				urb->dev, serial->dev);
+			dev_dbg(&port->dev, "%s: dev %p != %p",
+				 __func__, urb->dev, serial->dev);
 			continue;
 		}
 
@@ -601,7 +607,7 @@ static void sierra_close(struct tty_struct *tty,
 	struct usb_serial *serial = port->serial;
 	struct sierra_port_private *portdata;
 
-	dbg("%s", __func__);
+	dev_dbg(&port->dev, "%s", __func__);
 	portdata = usb_get_serial_port_data(port);
 
 	portdata->rts_state = 0;
@@ -630,7 +636,7 @@ static int sierra_startup(struct usb_serial *serial)
 	int i;
 	int j;
 
-	dbg("%s", __func__);
+	dev_dbg(&serial->dev->dev, "%s", __func__);
 
 	/* Set Device mode to D0 */
 	sierra_set_power_state(serial->dev, 0x0000);
@@ -644,8 +650,9 @@ static int sierra_startup(struct usb_serial *serial)
 		port = serial->port[i];
 		portdata = kzalloc(sizeof(*portdata), GFP_KERNEL);
 		if (!portdata) {
-			dbg("%s: kmalloc for sierra_port_private (%d) failed!.",
-					__func__, i);
+			dev_dbg(&port->dev, "%s: kmalloc for "
+				"sierra_port_private (%d) failed!.",
+				__func__, i);
 			return -ENOMEM;
 		}
 		spin_lock_init(&portdata->lock);
@@ -665,8 +672,8 @@ static int sierra_startup(struct usb_serial *serial)
 		for (j = 0; j < N_IN_URB; ++j) {
 			urb = usb_alloc_urb(0, GFP_KERNEL);
 			if (urb == NULL) {
-				dbg("%s: alloc for in port failed.",
-				    __func__);
+				dev_dbg(&port->dev, "%s: alloc for in "
+					"port failed.", __func__);
 				continue;
 			}
 			/* Fill URB using supplied data. */
@@ -688,7 +695,7 @@ static void sierra_shutdown(struct usb_serial *serial)
 	struct usb_serial_port *port;
 	struct sierra_port_private *portdata;
 
-	dbg("%s", __func__);
+	dev_dbg(&serial->dev->dev, "%s", __func__);
 
 	for (i = 0; i < serial->num_ports; ++i) {
 		port = serial->port[i];
-- 
cgit v1.1


From 925dff5dee04fb46d2e67c088c54b331f97672ee Mon Sep 17 00:00:00 2001
From: Huang Weiyi <hwy@cn.fujitsu.com>
Date: Thu, 25 Sep 2008 13:11:28 +0800
Subject: USB: ti_usb_3410_5052: removed duplicated include

Removed duplicated #include <linux/firmware.h> in
drivers/usb/serial/ti_usb_3410_5052.c.

Signed-off-by: Huang Weiyi <hwy@cn.fujitsu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/serial/ti_usb_3410_5052.c | 1 -
 1 file changed, 1 deletion(-)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index c90237d..a9523b8 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -85,7 +85,6 @@
 #include <linux/uaccess.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
-#include <linux/firmware.h>
 
 #include "ti_usb_3410_5052.h"
 
-- 
cgit v1.1


From bb78a825fa91621e52b9a5409fd9ef07895275bf Mon Sep 17 00:00:00 2001
From: Jon K Hellan <hellan@acm.org>
Date: Fri, 3 Oct 2008 10:36:16 +0200
Subject: USB: Option / AnyData new modem, same ID

The AnyData ADU-310 series of wireless modems uses the same product ID as the ADU-E100 series.

Signed-off-by: Jon K Hellan <hellan@acm.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/serial/option.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index fa8ec3a..45b8fc3 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -301,7 +301,7 @@ static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(DELL_VENDOR_ID, 0x8137) },	/* Dell Wireless HSDPA 5520 */
 	{ USB_DEVICE(DELL_VENDOR_ID, 0x8138) },	/* Dell Wireless 5520 Voda I Mobile Broadband (3G HSDPA) Minicard */
 	{ USB_DEVICE(DELL_VENDOR_ID, 0x8147) },	/* Dell Wireless 5530 Mobile Broadband (3G HSPA) Mini-Card */
-	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) },
+	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_E100A) },	/* ADU-E100, ADU-310 */
 	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) },
 	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) },
 	{ USB_DEVICE(AXESSTEL_VENDOR_ID, AXESSTEL_PRODUCT_MV110H) },
-- 
cgit v1.1


From 8b6346ec899713a90890c9e832f7eff91ea73504 Mon Sep 17 00:00:00 2001
From: Dan Williams <dcbw@redhat.com>
Date: Fri, 10 Oct 2008 06:41:16 -0400
Subject: USB: option: add Pantech cards

Add some Pantech mobile broadband IDs.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/serial/option.c | 9 +++++++++
 1 file changed, 9 insertions(+)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 45b8fc3..0d18a40 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -213,6 +213,12 @@ static int  option_send_setup(struct tty_struct *tty, struct usb_serial_port *po
 #define ERICSSON_VENDOR_ID			0x0bdb
 #define ERICSSON_PRODUCT_F3507G			0x1900
 
+/* Pantech products */
+#define PANTECH_VENDOR_ID			0x106c
+#define PANTECH_PRODUCT_PC5740			0x3701
+#define PANTECH_PRODUCT_PC5750			0x3702  /* PX-500 */
+#define PANTECH_PRODUCT_UM150			0x3711
+
 static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
@@ -333,6 +339,9 @@ static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) },
 	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) },
 	{ USB_DEVICE(ERICSSON_VENDOR_ID, ERICSSON_PRODUCT_F3507G) },
+	{ USB_DEVICE(PANTECH_VENDOR_ID, PANTECH_PRODUCT_PC5740) },
+	{ USB_DEVICE(PANTECH_VENDOR_ID, PANTECH_PRODUCT_PC5750) },
+	{ USB_DEVICE(PANTECH_VENDOR_ID, PANTECH_PRODUCT_UM150) },
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);
-- 
cgit v1.1


From c197a8db59daf06dc5e77acd5a9681329cb22458 Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Mon, 18 Aug 2008 13:21:04 -0700
Subject: USB: remove info() macro from usb/serial drivers

USB should not be having it's own printk macros, so remove info() and
use the system-wide standard of dev_info() wherever possible.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/serial/belkin_sa.c        |  5 +++--
 drivers/usb/serial/cp2101.c           |  3 ++-
 drivers/usb/serial/cyberjack.c        |  5 +++--
 drivers/usb/serial/cypress_m8.c       |  3 ++-
 drivers/usb/serial/digi_acceleport.c  |  3 ++-
 drivers/usb/serial/empeg.c            |  3 ++-
 drivers/usb/serial/ftdi_sio.c         | 11 +++++++----
 drivers/usb/serial/garmin_gps.c       |  3 ++-
 drivers/usb/serial/hp4x.c             |  3 ++-
 drivers/usb/serial/io_edgeport.c      |  3 ++-
 drivers/usb/serial/io_ti.c            |  3 ++-
 drivers/usb/serial/ipaq.c             |  3 ++-
 drivers/usb/serial/ipw.c              |  3 ++-
 drivers/usb/serial/ir-usb.c           |  3 ++-
 drivers/usb/serial/iuu_phoenix.c      |  3 ++-
 drivers/usb/serial/keyspan.c          |  3 ++-
 drivers/usb/serial/keyspan_pda.c      |  3 ++-
 drivers/usb/serial/kl5kusb105.c       | 23 ++++++++++++-----------
 drivers/usb/serial/kobil_sct.c        |  4 ++--
 drivers/usb/serial/mct_u232.c         |  3 ++-
 drivers/usb/serial/mos7720.c          |  3 ++-
 drivers/usb/serial/mos7840.c          |  3 ++-
 drivers/usb/serial/omninet.c          |  3 ++-
 drivers/usb/serial/option.c           |  3 ++-
 drivers/usb/serial/pl2303.c           |  2 +-
 drivers/usb/serial/safe_serial.c      | 13 ++++++-------
 drivers/usb/serial/sierra.c           |  3 ++-
 drivers/usb/serial/spcp8x5.c          |  3 ++-
 drivers/usb/serial/ti_usb_3410_5052.c |  3 ++-
 drivers/usb/serial/usb-serial.c       |  7 ++++---
 drivers/usb/serial/visor.c            | 15 +++++++++------
 drivers/usb/serial/whiteheat.c        |  8 +++++---
 32 files changed, 96 insertions(+), 63 deletions(-)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index 1913bc7..bb19f1c 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -187,7 +187,7 @@ static int belkin_sa_startup(struct usb_serial *serial)
 	/* see comments at top of file */
 	priv->bad_flow_control =
 		(le16_to_cpu(dev->descriptor.bcdDevice) <= 0x0206) ? 1 : 0;
-	info("bcdDevice: %04x, bfc: %d",
+	dev_info(&dev->dev, "bcdDevice: %04x, bfc: %d\n",
 					le16_to_cpu(dev->descriptor.bcdDevice),
 					priv->bad_flow_control);
 
@@ -577,7 +577,8 @@ static int __init belkin_sa_init(void)
 	retval = usb_register(&belkin_driver);
 	if (retval)
 		goto failed_usb_register;
-	info(DRIVER_DESC " " DRIVER_VERSION);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 	return 0;
 failed_usb_register:
 	usb_serial_deregister(&belkin_device);
diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c
index 1279553..8008d0b 100644
--- a/drivers/usb/serial/cp2101.c
+++ b/drivers/usb/serial/cp2101.c
@@ -753,7 +753,8 @@ static int __init cp2101_init(void)
 	}
 
 	/* Success */
-	info(DRIVER_DESC " " DRIVER_VERSION);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 	return 0;
 }
 
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index 94ef36c..068680f 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -499,8 +499,9 @@ static int __init cyberjack_init(void)
 	if (retval)
 		goto failed_usb_register;
 
-	info(DRIVER_VERSION " " DRIVER_AUTHOR);
-	info(DRIVER_DESC);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION " "
+	       DRIVER_AUTHOR "\n");
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC "\n");
 
 	return 0;
 failed_usb_register:
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index f3514a9..e0ca809 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -1658,7 +1658,8 @@ static int __init cypress_init(void)
 	if (retval)
 		goto failed_usb_register;
 
-	info(DRIVER_DESC " " DRIVER_VERSION);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 	return 0;
 
 failed_usb_register:
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index 5756ac6..ebc2918 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -1854,7 +1854,8 @@ static int __init digi_init(void)
 	retval = usb_register(&digi_driver);
 	if (retval)
 		goto failed_usb_register;
-	info(DRIVER_VERSION ":" DRIVER_DESC);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 	return 0;
 failed_usb_register:
 	usb_serial_deregister(&digi_acceleport_4_device);
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index 1072e84..fdd28e9 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -519,7 +519,8 @@ static int __init empeg_init(void)
 	if (retval)
 		goto failed_usb_register;
 
-	info(DRIVER_VERSION ":" DRIVER_DESC);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 
 	return 0;
 failed_usb_register:
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 89dab5c..bcadb1f 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1154,7 +1154,7 @@ static void ftdi_determine_type(struct usb_serial_port *port)
 		/* Assume its an FT232R  */
 		priv->chip_type = FT232RL;
 	}
-	info("Detected %s", ftdi_chip_name[priv->chip_type]);
+	dev_info(&udev->dev, "Detected %s\n", ftdi_chip_name[priv->chip_type]);
 }
 
 
@@ -1410,7 +1410,8 @@ static int ftdi_jtag_probe(struct usb_serial *serial)
 	dbg("%s", __func__);
 
 	if (interface == udev->actconfig->interface[0]) {
-		info("Ignoring serial port reserved for JTAG");
+		dev_info(&udev->dev,
+			 "Ignoring serial port reserved for JTAG\n");
 		return -ENODEV;
 	}
 
@@ -1428,7 +1429,8 @@ static int ftdi_mtxorb_hack_setup(struct usb_serial *serial)
 
 	if (ep->enabled && ep_desc->wMaxPacketSize == 0) {
 		ep_desc->wMaxPacketSize = cpu_to_le16(0x40);
-		info("Fixing invalid wMaxPacketSize on read pipe");
+		dev_info(&serial->dev->dev,
+			 "Fixing invalid wMaxPacketSize on read pipe\n");
 	}
 
 	return 0;
@@ -2426,7 +2428,8 @@ static int __init ftdi_init(void)
 	if (retval)
 		goto failed_usb_register;
 
-	info(DRIVER_VERSION ":" DRIVER_DESC);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 	return 0;
 failed_usb_register:
 	usb_serial_deregister(&ftdi_sio_device);
diff --git a/drivers/usb/serial/garmin_gps.c b/drivers/usb/serial/garmin_gps.c
index 2ad0569..8e6a66e 100644
--- a/drivers/usb/serial/garmin_gps.c
+++ b/drivers/usb/serial/garmin_gps.c
@@ -1585,7 +1585,8 @@ static int __init garmin_init(void)
 	retval = usb_register(&garmin_driver);
 	if (retval)
 		goto failed_usb_register;
-	info(DRIVER_DESC " " DRIVER_VERSION);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 
 	return 0;
 failed_usb_register:
diff --git a/drivers/usb/serial/hp4x.c b/drivers/usb/serial/hp4x.c
index ab90586..4313292 100644
--- a/drivers/usb/serial/hp4x.c
+++ b/drivers/usb/serial/hp4x.c
@@ -63,7 +63,8 @@ static int __init hp49gp_init(void)
 	retval = usb_register(&hp49gp_driver);
 	if (retval)
 		goto failed_usb_register;
-	info(DRIVER_DESC " " DRIVER_VERSION);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 	return 0;
 failed_usb_register:
 	usb_serial_deregister(&hp49gp_device);
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index 611f97f..eb95efd 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -3253,7 +3253,8 @@ static int __init edgeport_init(void)
 	if (retval)
 		goto failed_usb_register;
 	atomic_set(&CmdUrbs, 0);
-	info(DRIVER_DESC " " DRIVER_VERSION);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 	return 0;
 
 failed_usb_register:
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c
index 541dd8e..c3cdd00 100644
--- a/drivers/usb/serial/io_ti.c
+++ b/drivers/usb/serial/io_ti.c
@@ -2978,7 +2978,8 @@ static int __init edgeport_init(void)
 	retval = usb_register(&io_driver);
 	if (retval)
 		goto failed_usb_register;
-	info(DRIVER_DESC " " DRIVER_VERSION);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 	return 0;
 failed_usb_register:
 	usb_serial_deregister(&edgeport_2port_device);
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index 2affa9c..5108cbc 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -976,7 +976,6 @@ static int __init ipaq_init(void)
 	retval = usb_serial_register(&ipaq_device);
 	if (retval)
 		goto failed_usb_serial_register;
-	info(DRIVER_DESC " " DRIVER_VERSION);
 	if (vendor) {
 		ipaq_id_table[0].idVendor = vendor;
 		ipaq_id_table[0].idProduct = product;
@@ -985,6 +984,8 @@ static int __init ipaq_init(void)
 	if (retval)
 		goto failed_usb_register;
 
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 	return 0;
 failed_usb_register:
 	usb_serial_deregister(&ipaq_device);
diff --git a/drivers/usb/serial/ipw.c b/drivers/usb/serial/ipw.c
index 480cac2..3ac59a8 100644
--- a/drivers/usb/serial/ipw.c
+++ b/drivers/usb/serial/ipw.c
@@ -485,7 +485,8 @@ static int usb_ipw_init(void)
 		usb_serial_deregister(&ipw_device);
 		return retval;
 	}
-	info(DRIVER_DESC " " DRIVER_VERSION);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 	return 0;
 }
 
diff --git a/drivers/usb/serial/ir-usb.c b/drivers/usb/serial/ir-usb.c
index 45d4043..b679a55 100644
--- a/drivers/usb/serial/ir-usb.c
+++ b/drivers/usb/serial/ir-usb.c
@@ -602,7 +602,8 @@ static int __init ir_init(void)
 	if (retval)
 		goto failed_usb_register;
 
-	info(DRIVER_DESC " " DRIVER_VERSION);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 
 	return 0;
 
diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c
index 53710aa7..e320972 100644
--- a/drivers/usb/serial/iuu_phoenix.c
+++ b/drivers/usb/serial/iuu_phoenix.c
@@ -1185,7 +1185,8 @@ static int __init iuu_init(void)
 	retval = usb_register(&iuu_driver);
 	if (retval)
 		goto failed_usb_register;
-	info(DRIVER_DESC " " DRIVER_VERSION);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 	return 0;
 failed_usb_register:
 	usb_serial_deregister(&iuu_device);
diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c
index 15447af..9878c0f 100644
--- a/drivers/usb/serial/keyspan.c
+++ b/drivers/usb/serial/keyspan.c
@@ -217,7 +217,8 @@ static int __init keyspan_init(void)
 	if (retval)
 		goto failed_usb_register;
 
-	info(DRIVER_VERSION ":" DRIVER_DESC);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 
 	return 0;
 failed_usb_register:
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index 99e9a14..2928ba8 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -874,7 +874,8 @@ static int __init keyspan_pda_init(void)
 	retval = usb_register(&keyspan_pda_driver);
 	if (retval)
 		goto failed_usb_register;
-	info(DRIVER_DESC " " DRIVER_VERSION);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 	return 0;
 failed_usb_register:
 #ifdef XIRCOM
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index ff3a07f..573c697 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -183,11 +183,10 @@ static int klsi_105_chg_port_settings(struct usb_serial_port *port,
 			KLSI_TIMEOUT);
 	if (rc < 0)
 		err("Change port settings failed (error = %d)", rc);
-	info("%s - %d byte block, baudrate %x, databits %d, u1 %d, u2 %d",
-	    __func__,
-	    settings->pktlen,
-	    settings->baudrate, settings->databits,
-	    settings->unknown1, settings->unknown2);
+	dev_info(&port->serial->dev->dev,
+		 "%d byte block, baudrate %x, databits %d, u1 %d, u2 %d\n",
+		 settings->pktlen, settings->baudrate, settings->databits,
+		 settings->unknown1, settings->unknown2);
 	return rc;
 } /* klsi_105_chg_port_settings */
 
@@ -215,7 +214,7 @@ static int klsi_105_get_line_state(struct usb_serial_port *port,
 	__u8 status_buf[KLSI_STATUSBUF_LEN] = { -1, -1};
 	__u16 status;
 
-	info("%s - sending SIO Poll request", __func__);
+	dev_info(&port->serial->dev->dev, "sending SIO Poll request\n");
 	rc = usb_control_msg(port->serial->dev,
 			     usb_rcvctrlpipe(port->serial->dev, 0),
 			     KL5KUSB105A_SIO_POLL,
@@ -230,8 +229,8 @@ static int klsi_105_get_line_state(struct usb_serial_port *port,
 	else {
 		status = get_unaligned_le16(status_buf);
 
-		info("%s - read status %x %x", __func__,
-		     status_buf[0], status_buf[1]);
+		dev_info(&port->serial->dev->dev, "read status %x %x",
+			 status_buf[0], status_buf[1]);
 
 		*line_state_p = klsi_105_status2linestate(status);
 	}
@@ -475,8 +474,9 @@ static void klsi_105_close(struct tty_struct *tty,
 	/* FIXME */
 	/* wgg - do I need this? I think so. */
 	usb_kill_urb(port->interrupt_in_urb);
-	info("kl5kusb105 port stats: %ld bytes in, %ld bytes out",
-					priv->bytes_in, priv->bytes_out);
+	dev_info(&port->serial->dev->dev,
+		 "port stats: %ld bytes in, %ld bytes out\n",
+		 priv->bytes_in, priv->bytes_out);
 } /* klsi_105_close */
 
 
@@ -960,7 +960,8 @@ static int __init klsi_105_init(void)
 	if (retval)
 		goto failed_usb_register;
 
-	info(DRIVER_DESC " " DRIVER_VERSION);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 	return 0;
 failed_usb_register:
 	usb_serial_deregister(&kl5kusb105d_device);
diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c
index cfcf37c..6286baa 100644
--- a/drivers/usb/serial/kobil_sct.c
+++ b/drivers/usb/serial/kobil_sct.c
@@ -744,8 +744,8 @@ static int __init kobil_init(void)
 	if (retval)
 		goto failed_usb_register;
 
-	info(DRIVER_VERSION " " DRIVER_AUTHOR);
-	info(DRIVER_DESC);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 
 	return 0;
 failed_usb_register:
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index 9b2cef8..29fa66e 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -817,7 +817,8 @@ static int __init mct_u232_init(void)
 	retval = usb_register(&mct_u232_driver);
 	if (retval)
 		goto failed_usb_register;
-	info(DRIVER_DESC " " DRIVER_VERSION);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 	return 0;
 failed_usb_register:
 	usb_serial_deregister(&mct_u232_device);
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 7b538ca..5711aa5 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -1585,7 +1585,8 @@ static int __init moschip7720_init(void)
 	if (retval)
 		goto failed_port_device_register;
 
-	info(DRIVER_DESC " " DRIVER_VERSION);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 
 	/* Register with the usb */
 	retval = usb_register(&usb_driver);
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index 60543d7..d5f6826 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -2743,7 +2743,8 @@ static int __init moschip7840_init(void)
 		goto failed_port_device_register;
 
 	dbg("%s\n", "Entring...");
-	info(DRIVER_DESC " " DRIVER_VERSION);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 
 	/* Register with the usb */
 	retval = usb_register(&io_driver);
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index c4d70b0..9890f26 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -364,7 +364,8 @@ static int __init omninet_init(void)
 	retval = usb_register(&omninet_driver);
 	if (retval)
 		goto failed_usb_register;
-	info(DRIVER_VERSION ":" DRIVER_DESC);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 	return 0;
 failed_usb_register:
 	usb_serial_deregister(&zyxel_omninet_device);
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 0d18a40..3d87eab 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -420,7 +420,8 @@ static int __init option_init(void)
 	if (retval)
 		goto failed_driver_register;
 
-	info(DRIVER_DESC ": " DRIVER_VERSION);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 
 	return 0;
 
diff --git a/drivers/usb/serial/pl2303.c b/drivers/usb/serial/pl2303.c
index 9084378..491c885 100644
--- a/drivers/usb/serial/pl2303.c
+++ b/drivers/usb/serial/pl2303.c
@@ -1147,7 +1147,7 @@ static int __init pl2303_init(void)
 	retval = usb_register(&pl2303_driver);
 	if (retval)
 		goto failed_usb_register;
-	info(DRIVER_DESC);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC "\n");
 	return 0;
 failed_usb_register:
 	usb_serial_deregister(&pl2303_device);
diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c
index 72903ac..40cff61 100644
--- a/drivers/usb/serial/safe_serial.c
+++ b/drivers/usb/serial/safe_serial.c
@@ -250,8 +250,8 @@ static void safe_read_bulk_callback(struct urb *urb)
 		if (!fcs) {
 			int actual_length = data[length - 2] >> 2;
 			if (actual_length <= (length - 2)) {
-				info("%s - actual: %d", __func__,
-							actual_length);
+				dev_info(&urb->dev->dev, "%s - actual: %d\n",
+					 __func__, actual_length);
 				tty_insert_flip_string(tty,
 							data, actual_length);
 				tty_flip_buffer_push(tty);
@@ -428,14 +428,13 @@ static int __init safe_init(void)
 {
 	int i, retval;
 
-	info(DRIVER_VERSION " " DRIVER_AUTHOR);
-	info(DRIVER_DESC);
-	info("vendor: %x product: %x safe: %d padded: %d\n",
-					vendor, product, safe, padded);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 
 	/* if we have vendor / product parameters patch them into id list */
 	if (vendor || product) {
-		info("vendor: %x product: %x\n", vendor, product);
+		printk(KERN_INFO KBUILD_MODNAME ": vendor: %x product: %x\n",
+		       vendor, product);
 
 		for (i = 0; i < ARRAY_SIZE(id_table); i++) {
 			if (!id_table[i].idVendor && !id_table[i].idProduct) {
diff --git a/drivers/usb/serial/sierra.c b/drivers/usb/serial/sierra.c
index 6794e57..0f2b672 100644
--- a/drivers/usb/serial/sierra.c
+++ b/drivers/usb/serial/sierra.c
@@ -750,7 +750,8 @@ static int __init sierra_init(void)
 	if (retval)
 		goto failed_driver_register;
 
-	info(DRIVER_DESC ": " DRIVER_VERSION);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 
 	return 0;
 
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index 1533d6e..96aeec7 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -1054,7 +1054,8 @@ static int __init spcp8x5_init(void)
 	retval = usb_register(&spcp8x5_driver);
 	if (retval)
 		goto failed_usb_register;
-	info(DRIVER_DESC " " DRIVER_VERSION);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 	return 0;
 failed_usb_register:
 	usb_serial_deregister(&spcp8x5_device);
diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c
index a9523b8..31c42d1 100644
--- a/drivers/usb/serial/ti_usb_3410_5052.c
+++ b/drivers/usb/serial/ti_usb_3410_5052.c
@@ -382,7 +382,8 @@ static int __init ti_init(void)
 	if (ret)
 		goto failed_usb;
 
-	info(TI_DRIVER_DESC " " TI_DRIVER_VERSION);
+	printk(KERN_INFO KBUILD_MODNAME ": " TI_DRIVER_VERSION ":"
+	       TI_DRIVER_DESC "\n");
 
 	return 0;
 
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index e7d4246..92ba4f7 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -1160,7 +1160,7 @@ static int __init usb_serial_init(void)
 		goto exit_generic;
 	}
 
-	info(DRIVER_DESC);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC "\n");
 
 	return result;
 
@@ -1237,7 +1237,7 @@ int usb_serial_register(struct usb_serial_driver *driver)
 						retval, driver->description);
 		list_del(&driver->driver_list);
 	} else
-		info("USB Serial support registered for %s",
+		printk(KERN_INFO "USB Serial support registered for %s\n",
 						driver->description);
 
 	return retval;
@@ -1248,7 +1248,8 @@ EXPORT_SYMBOL_GPL(usb_serial_register);
 void usb_serial_deregister(struct usb_serial_driver *device)
 {
 	/* must be called with BKL held */
-	info("USB Serial deregistering driver %s", device->description);
+	printk(KERN_INFO "USB Serial deregistering driver %s\n",
+	       device->description);
 	list_del(&device->driver_list);
 	usb_serial_bus_deregister(device);
 }
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index a6d1c75..de4b5f0 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -971,11 +971,14 @@ static int __init visor_init(void)
 				break;
 			}
 		}
-		info(
-		  "Untested USB device specified at time of module insertion");
-		info("Warning: This is not guaranteed to work");
-		info("Using a newer kernel is preferred to this method");
-		info("Adding Palm OS protocol 4.x support for unknown device: 0x%x/0x%x",
+		printk(KERN_INFO KBUILD_MODNAME
+		       ": Untested USB device specified at time of module insertion\n");
+		printk(KERN_INFO KBUILD_MODNAME
+		       ": Warning: This is not guaranteed to work\n");
+		printk(KERN_INFO KBUILD_MODNAME
+		       ": Using a newer kernel is preferred to this method\n");
+		printk(KERN_INFO KBUILD_MODNAME
+		       ": Adding Palm OS protocol 4.x support for unknown device: 0x%x/0x%x\n",
 			vendor, product);
 	}
 	retval = usb_serial_register(&handspring_device);
@@ -990,7 +993,7 @@ static int __init visor_init(void)
 	retval = usb_register(&visor_driver);
 	if (retval)
 		goto failed_usb_register;
-	info(DRIVER_DESC);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC "\n");
 
 	return 0;
 failed_usb_register:
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 11c8b97..39f7f8d 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -452,8 +452,9 @@ static int whiteheat_attach(struct usb_serial *serial)
 
 	hw_info = (struct whiteheat_hw_info *)&result[1];
 
-	info("%s: Driver %s: Firmware v%d.%02d", serial->type->description,
-	     DRIVER_VERSION, hw_info->sw_major_rev, hw_info->sw_minor_rev);
+	dev_info(&serial->dev->dev, "%s: Driver %s: Firmware v%d.%02d\n",
+		 serial->type->description, DRIVER_VERSION,
+		 hw_info->sw_major_rev, hw_info->sw_minor_rev);
 
 	for (i = 0; i < serial->num_ports; i++) {
 		port = serial->port[i];
@@ -1556,7 +1557,8 @@ static int __init whiteheat_init(void)
 	retval = usb_register(&whiteheat_driver);
 	if (retval)
 		goto failed_usb_register;
-	info(DRIVER_DESC " " DRIVER_VERSION);
+	printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
+	       DRIVER_DESC "\n");
 	return 0;
 failed_usb_register:
 	usb_serial_deregister(&whiteheat_device);
-- 
cgit v1.1


From 194343d9364ea07c9f27c4505380a15a905e8a24 Mon Sep 17 00:00:00 2001
From: Greg Kroah-Hartman <gregkh@suse.de>
Date: Wed, 20 Aug 2008 16:56:34 -0700
Subject: USB: remove use of err() in drivers/usb/serial

err() is going away, so switch to dev_err() or printk() if it's really
needed.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
---
 drivers/usb/serial/aircable.c        |   8 +--
 drivers/usb/serial/belkin_sa.c       |  34 +++++------
 drivers/usb/serial/cyberjack.c       |  23 ++++---
 drivers/usb/serial/cypress_m8.c      |  18 +++---
 drivers/usb/serial/digi_acceleport.c |  65 ++++++++++++--------
 drivers/usb/serial/empeg.c           |   8 +--
 drivers/usb/serial/ezusb.c           |   3 +-
 drivers/usb/serial/ftdi_sio.c        |  68 ++++++++++++---------
 drivers/usb/serial/io_edgeport.c     |  16 ++---
 drivers/usb/serial/ipaq.c            |  27 +++++----
 drivers/usb/serial/keyspan_pda.c     |  14 +++--
 drivers/usb/serial/kl5kusb105.c      |  46 ++++++++------
 drivers/usb/serial/mct_u232.c        |  39 +++++++-----
 drivers/usb/serial/mos7720.c         |  19 +++---
 drivers/usb/serial/mos7840.c         |  26 ++++----
 drivers/usb/serial/omninet.c         |  19 +++---
 drivers/usb/serial/safe_serial.c     |  15 +++--
 drivers/usb/serial/spcp8x5.c         |   7 ++-
 drivers/usb/serial/usb-serial.c      |  19 +++---
 drivers/usb/serial/visor.c           |   2 +-
 drivers/usb/serial/whiteheat.c       | 113 +++++++++++++++++++++--------------
 21 files changed, 346 insertions(+), 243 deletions(-)

(limited to 'drivers/usb/serial')

diff --git a/drivers/usb/serial/aircable.c b/drivers/usb/serial/aircable.c
index 99fb7dc..537f953 100644
--- a/drivers/usb/serial/aircable.c
+++ b/drivers/usb/serial/aircable.c
@@ -220,8 +220,8 @@ static void aircable_send(struct usb_serial_port *port)
 
 	buf = kzalloc(count + HCI_HEADER_LENGTH, GFP_ATOMIC);
 	if (!buf) {
-		err("%s- kzalloc(%d) failed.", __func__,
-		    count + HCI_HEADER_LENGTH);
+		dev_err(&port->dev, "%s- kzalloc(%d) failed.\n",
+			__func__, count + HCI_HEADER_LENGTH);
 		return;
 	}
 
@@ -276,7 +276,7 @@ static void aircable_read(struct work_struct *work)
 
 	if (!tty) {
 		schedule_work(&priv->rx_work);
-		err("%s - No tty available", __func__);
+		dev_err(&port->dev, "%s - No tty available\n", __func__);
 		return ;
 	}
 
@@ -336,7 +336,7 @@ static int aircable_attach(struct usb_serial *serial)
 
 	priv = kzalloc(sizeof(struct aircable_private), GFP_KERNEL);
 	if (!priv) {
-		err("%s- kmalloc(%Zd) failed.", __func__,
+		dev_err(&port->dev, "%s- kmalloc(%Zd) failed.\n", __func__,
 			sizeof(struct aircable_private));
 		return -ENOMEM;
 	}
diff --git a/drivers/usb/serial/belkin_sa.c b/drivers/usb/serial/belkin_sa.c
index bb19f1c..b7eacad 100644
--- a/drivers/usb/serial/belkin_sa.c
+++ b/drivers/usb/serial/belkin_sa.c
@@ -228,7 +228,7 @@ static int  belkin_sa_open(struct tty_struct *tty,
 	port->read_urb->dev = port->serial->dev;
 	retval = usb_submit_urb(port->read_urb, GFP_KERNEL);
 	if (retval) {
-		err("usb_submit_urb(read bulk) failed");
+		dev_err(&port->dev, "usb_submit_urb(read bulk) failed\n");
 		goto exit;
 	}
 
@@ -236,7 +236,7 @@ static int  belkin_sa_open(struct tty_struct *tty,
 	retval = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 	if (retval) {
 		usb_kill_urb(port->read_urb);
-		err(" usb_submit_urb(read int) failed");
+		dev_err(&port->dev, "usb_submit_urb(read int) failed\n");
 	}
 
 exit:
@@ -342,8 +342,8 @@ static void belkin_sa_read_int_callback(struct urb *urb)
 exit:
 	retval = usb_submit_urb(urb, GFP_ATOMIC);
 	if (retval)
-		err("%s - usb_submit_urb failed with result %d",
-		     __func__, retval);
+		dev_err(&port->dev, "%s - usb_submit_urb failed with "
+			"result %d\n", __func__, retval);
 }
 
 static void belkin_sa_set_termios(struct tty_struct *tty,
@@ -382,12 +382,12 @@ static void belkin_sa_set_termios(struct tty_struct *tty,
 		if ((old_cflag & CBAUD) == B0) {
 			control_state |= (TIOCM_DTR|TIOCM_RTS);
 			if (BSA_USB_CMD(BELKIN_SA_SET_DTR_REQUEST, 1) < 0)
-				err("Set DTR error");
+				dev_err(&port->dev, "Set DTR error\n");
 			/* don't set RTS if using hardware flow control */
 			if (!(old_cflag & CRTSCTS))
 				if (BSA_USB_CMD(BELKIN_SA_SET_RTS_REQUEST
 								, 1) < 0)
-					err("Set RTS error");
+					dev_err(&port->dev, "Set RTS error\n");
 		}
 	}
 
@@ -403,18 +403,18 @@ static void belkin_sa_set_termios(struct tty_struct *tty,
 		/* Report the actual baud rate back to the caller */
 		tty_encode_baud_rate(tty, baud, baud);
 		if (BSA_USB_CMD(BELKIN_SA_SET_BAUDRATE_REQUEST, urb_value) < 0)
-			err("Set baudrate error");
+			dev_err(&port->dev, "Set baudrate error\n");
 	} else {
 		/* Disable flow control */
 		if (BSA_USB_CMD(BELKIN_SA_SET_FLOW_CTRL_REQUEST,
 						BELKIN_SA_FLOW_NONE) < 0)
-			err("Disable flowcontrol error");
+			dev_err(&port->dev, "Disable flowcontrol error\n");
 		/* Drop RTS and DTR */
 		control_state &= ~(TIOCM_DTR | TIOCM_RTS);
 		if (BSA_USB_CMD(BELKIN_SA_SET_DTR_REQUEST, 0) < 0)
-			err("DTR LOW error");
+			dev_err(&port->dev, "DTR LOW error\n");
 		if (BSA_USB_CMD(BELKIN_SA_SET_RTS_REQUEST, 0) < 0)
-			err("RTS LOW error");
+			dev_err(&port->dev, "RTS LOW error\n");
 	}
 
 	/* set the parity */
@@ -425,7 +425,7 @@ static void belkin_sa_set_termios(struct tty_struct *tty,
 		else
 			urb_value = BELKIN_SA_PARITY_NONE;
 		if (BSA_USB_CMD(BELKIN_SA_SET_PARITY_REQUEST, urb_value) < 0)
-			err("Set parity error");
+			dev_err(&port->dev, "Set parity error\n");
 	}
 
 	/* set the number of data bits */
@@ -448,7 +448,7 @@ static void belkin_sa_set_termios(struct tty_struct *tty,
 			break;
 		}
 		if (BSA_USB_CMD(BELKIN_SA_SET_DATA_BITS_REQUEST, urb_value) < 0)
-			err("Set data bits error");
+			dev_err(&port->dev, "Set data bits error\n");
 	}
 
 	/* set the number of stop bits */
@@ -457,7 +457,7 @@ static void belkin_sa_set_termios(struct tty_struct *tty,
 						: BELKIN_SA_STOP_BITS(1);
 		if (BSA_USB_CMD(BELKIN_SA_SET_STOP_BITS_REQUEST,
 							urb_value) < 0)
-			err("Set stop bits error");
+			dev_err(&port->dev, "Set stop bits error\n");
 	}
 
 	/* Set flow control */
@@ -478,7 +478,7 @@ static void belkin_sa_set_termios(struct tty_struct *tty,
 			urb_value &= ~(BELKIN_SA_FLOW_IRTS);
 
 		if (BSA_USB_CMD(BELKIN_SA_SET_FLOW_CTRL_REQUEST, urb_value) < 0)
-			err("Set flow control error");
+			dev_err(&port->dev, "Set flow control error\n");
 	}
 
 	/* save off the modified port settings */
@@ -494,7 +494,7 @@ static void belkin_sa_break_ctl(struct tty_struct *tty, int break_state)
 	struct usb_serial *serial = port->serial;
 
 	if (BSA_USB_CMD(BELKIN_SA_SET_BREAK_REQUEST, break_state ? 1 : 0) < 0)
-		err("Set break_ctl %d", break_state);
+		dev_err(&port->dev, "Set break_ctl %d\n", break_state);
 }
 
 
@@ -554,13 +554,13 @@ static int belkin_sa_tiocmset(struct tty_struct *tty, struct file *file,
 
 	retval = BSA_USB_CMD(BELKIN_SA_SET_RTS_REQUEST, rts);
 	if (retval < 0) {
-		err("Set RTS error %d", retval);
+		dev_err(&port->dev, "Set RTS error %d\n", retval);
 		goto exit;
 	}
 
 	retval = BSA_USB_CMD(BELKIN_SA_SET_DTR_REQUEST, dtr);
 	if (retval < 0) {
-		err("Set DTR error %d", retval);
+		dev_err(&port->dev, "Set DTR error %d\n", retval);
 		goto exit;
 	}
 exit:
diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c
index 068680f..858bdd0 100644
--- a/drivers/usb/serial/cyberjack.c
+++ b/drivers/usb/serial/cyberjack.c
@@ -141,7 +141,8 @@ static int cyberjack_startup(struct usb_serial *serial)
 		result = usb_submit_urb(serial->port[i]->interrupt_in_urb,
 					GFP_KERNEL);
 		if (result)
-			err(" usb_submit_urb(read int) failed");
+			dev_err(&serial->dev->dev,
+				"usb_submit_urb(read int) failed\n");
 		dbg("%s - usb_submit_urb(int urb)", __func__);
 	}
 
@@ -274,8 +275,9 @@ static int cyberjack_write(struct tty_struct *tty,
 		/* send the data out the bulk port */
 		result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
 		if (result) {
-			err("%s - failed submitting write urb, error %d",
-							__func__, result);
+			dev_err(&port->dev,
+				"%s - failed submitting write urb, error %d",
+				__func__, result);
 			/* Throw away data. No better idea what to do with it. */
 			priv->wrfilled = 0;
 			priv->wrsent = 0;
@@ -351,7 +353,9 @@ static void cyberjack_read_int_callback(struct urb *urb)
 			port->read_urb->dev = port->serial->dev;
 			result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
 			if (result)
-				err("%s - failed resubmitting read urb, error %d", __func__, result);
+				dev_err(&port->dev, "%s - failed resubmitting "
+					"read urb, error %d\n",
+					__func__, result);
 			dbg("%s - usb_submit_urb(read urb)", __func__);
 		}
 	}
@@ -360,7 +364,7 @@ resubmit:
 	port->interrupt_in_urb->dev = port->serial->dev;
 	result = usb_submit_urb(port->interrupt_in_urb, GFP_ATOMIC);
 	if (result)
-		err(" usb_submit_urb(read int) failed");
+		dev_err(&port->dev, "usb_submit_urb(read int) failed\n");
 	dbg("%s - usb_submit_urb(int urb)", __func__);
 }
 
@@ -414,8 +418,8 @@ static void cyberjack_read_bulk_callback(struct urb *urb)
 		port->read_urb->dev = port->serial->dev;
 		result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
 		if (result)
-			err("%s - failed resubmitting read urb, error %d",
-				__func__, result);
+			dev_err(&port->dev, "%s - failed resubmitting read "
+				"urb, error %d\n", __func__, result);
 		dbg("%s - usb_submit_urb(read urb)", __func__);
 	}
 }
@@ -462,8 +466,9 @@ static void cyberjack_write_bulk_callback(struct urb *urb)
 		/* send the data out the bulk port */
 		result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
 		if (result) {
-			err("%s - failed submitting write urb, error %d",
-								__func__, result);
+			dev_err(&port->dev,
+				"%s - failed submitting write urb, error %d\n",
+				__func__, result);
 			/* Throw away data. No better idea what to do with it. */
 			priv->wrfilled = 0;
 			priv->wrsent = 0;
diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c
index e0ca809..eae4740 100644
--- a/drivers/usb/serial/cypress_m8.c
+++ b/drivers/usb/serial/cypress_m8.c
@@ -404,8 +404,8 @@ static int cypress_serial_control(struct tty_struct *tty,
 			 retval != -ENODEV);
 
 		if (retval != sizeof(feature_buffer)) {
-			err("%s - failed sending serial line settings - %d",
-							__func__, retval);
+			dev_err(&port->dev, "%s - failed sending serial "
+				"line settings - %d\n", __func__, retval);
 			cypress_set_dead(port);
 		} else {
 			spin_lock_irqsave(&priv->lock, flags);
@@ -443,7 +443,8 @@ static int cypress_serial_control(struct tty_struct *tty,
 						&& retval != -ENODEV);
 
 		if (retval != sizeof(feature_buffer)) {
-			err("%s - failed to retrieve serial line settings - %d", __func__, retval);
+			dev_err(&port->dev, "%s - failed to retrieve serial "
+				"line settings - %d\n", __func__, retval);
 			cypress_set_dead(port);
 			return retval;
 		} else {
@@ -476,8 +477,8 @@ static void cypress_set_dead(struct usb_serial_port *port)
 	priv->comm_is_ok = 0;
 	spin_unlock_irqrestore(&priv->lock, flags);
 
-	err("cypress_m8 suspending failing port %d - interval might be too short",
-	    port->number);
+	dev_err(&port->dev, "cypress_m8 suspending failing port %d - "
+		"interval might be too short\n", port->number);
 }
 
 
@@ -679,7 +680,8 @@ static int cypress_open(struct tty_struct *tty,
 
 	/* setup the port and start reading from the device */
 	if (!port->interrupt_in_urb) {
-		err("%s - interrupt_in_urb is empty!", __func__);
+		dev_err(&port->dev, "%s - interrupt_in_urb is empty!\n",
+			__func__);
 		return -1;
 	}
 
@@ -1107,8 +1109,8 @@ static void cypress_set_termios(struct tty_struct *tty,
 		data_bits = 3;
 		break;
 	default:
-		err("%s - CSIZE was set, but not CS5-CS8",
-				__func__);
+		dev_err(&port->dev, "%s - CSIZE was set, but not CS5-CS8\n",
+			__func__);
 		data_bits = 3;
 	}
 	spin_lock_irqsave(&priv->lock, flags);
diff --git a/drivers/usb/serial/digi_acceleport.c b/drivers/usb/serial/digi_acceleport.c
index ebc2918..69f84f0 100644
--- a/drivers/usb/serial/digi_acceleport.c
+++ b/drivers/usb/serial/digi_acceleport.c
@@ -661,7 +661,8 @@ static int digi_write_oob_command(struct usb_serial_port *port,
 	}
 	spin_unlock_irqrestore(&oob_priv->dp_port_lock, flags);
 	if (ret)
-		err("%s: usb_submit_urb failed, ret=%d", __func__, ret);
+		dev_err(&port->dev, "%s: usb_submit_urb failed, ret=%d\n",
+			__func__, ret);
 	return ret;
 
 }
@@ -743,7 +744,8 @@ static int digi_write_inb_command(struct usb_serial_port *port,
 	spin_unlock_irqrestore(&priv->dp_port_lock, flags);
 
 	if (ret)
-		err("%s: usb_submit_urb failed, ret=%d, port=%d",
+		dev_err(&port->dev,
+			"%s: usb_submit_urb failed, ret=%d, port=%d\n",
 			__func__, ret, priv->dp_port_num);
 	return ret;
 }
@@ -812,7 +814,8 @@ static int digi_set_modem_signals(struct usb_serial_port *port,
 	spin_unlock(&port_priv->dp_port_lock);
 	spin_unlock_irqrestore(&oob_priv->dp_port_lock, flags);
 	if (ret)
-		err("%s: usb_submit_urb failed, ret=%d", __func__, ret);
+		dev_err(&port->dev, "%s: usb_submit_urb failed, ret=%d\n",
+			__func__, ret);
 	return ret;
 }
 
@@ -907,7 +910,8 @@ static void digi_rx_unthrottle(struct tty_struct *tty)
 	spin_unlock_irqrestore(&priv->dp_port_lock, flags);
 
 	if (ret)
-		err("%s: usb_submit_urb failed, ret=%d, port=%d",
+		dev_err(&port->dev,
+			"%s: usb_submit_urb failed, ret=%d, port=%d\n",
 			__func__, ret, priv->dp_port_num);
 }
 
@@ -1214,7 +1218,8 @@ static int digi_write(struct tty_struct *tty, struct usb_serial_port *port,
 	/* return length of new data written, or error */
 	spin_unlock_irqrestore(&priv->dp_port_lock, flags);
 	if (ret < 0)
-		err("%s: usb_submit_urb failed, ret=%d, port=%d",
+		dev_err(&port->dev,
+			"%s: usb_submit_urb failed, ret=%d, port=%d\n",
 			__func__, ret, priv->dp_port_num);
 	dbg("digi_write: returning %d", ret);
 	return ret;
@@ -1235,14 +1240,16 @@ static void digi_write_bulk_callback(struct urb *urb)
 
 	/* port and serial sanity check */
 	if (port == NULL || (priv = usb_get_serial_port_data(port)) == NULL) {
-		err("%s: port or port->private is NULL, status=%d",
-		    __func__, status);
+		dev_err(&port->dev,
+			"%s: port or port->private is NULL, status=%d\n",
+			__func__, status);
 		return;
 	}
 	serial = port->serial;
 	if (serial == NULL || (serial_priv = usb_get_serial_data(serial)) == NULL) {
-		err("%s: serial or serial->private is NULL, status=%d",
-		    __func__, status);
+		dev_err(&port->dev,
+			"%s: serial or serial->private is NULL, status=%d\n",
+			__func__, status);
 		return;
 	}
 
@@ -1284,7 +1291,8 @@ static void digi_write_bulk_callback(struct urb *urb)
 
 	spin_unlock(&priv->dp_port_lock);
 	if (ret)
-		err("%s: usb_submit_urb failed, ret=%d, port=%d",
+		dev_err(&port->dev,
+			"%s: usb_submit_urb failed, ret=%d, port=%d\n",
 			__func__, ret, priv->dp_port_num);
 }
 
@@ -1518,8 +1526,9 @@ static int digi_startup_device(struct usb_serial *serial)
 		port->write_urb->dev = port->serial->dev;
 		ret = usb_submit_urb(port->read_urb, GFP_KERNEL);
 		if (ret != 0) {
-			err("%s: usb_submit_urb failed, ret=%d, port=%d",
-					__func__, ret, i);
+			dev_err(&port->dev,
+				"%s: usb_submit_urb failed, ret=%d, port=%d\n",
+				__func__, ret, i);
 			break;
 		}
 	}
@@ -1618,22 +1627,26 @@ static void digi_read_bulk_callback(struct urb *urb)
 	dbg("digi_read_bulk_callback: TOP");
 
 	/* port sanity check, do not resubmit if port is not valid */
-	if (port == NULL || (priv = usb_get_serial_port_data(port)) == NULL) {
-		err("%s: port or port->private is NULL, status=%d",
-		    __func__, status);
+	if (port == NULL)
+		return;
+	priv = usb_get_serial_port_data(port);
+	if (priv == NULL) {
+		dev_err(&port->dev, "%s: port->private is NULL, status=%d\n",
+			__func__, status);
 		return;
 	}
 	if (port->serial == NULL ||
 		(serial_priv = usb_get_serial_data(port->serial)) == NULL) {
-		err("%s: serial is bad or serial->private is NULL, status=%d",
-			__func__, status);
+		dev_err(&port->dev, "%s: serial is bad or serial->private "
+			"is NULL, status=%d\n", __func__, status);
 		return;
 	}
 
 	/* do not resubmit urb if it has any status error */
 	if (status) {
-		err("%s: nonzero read bulk status: status=%d, port=%d",
-		    __func__, status, priv->dp_port_num);
+		dev_err(&port->dev,
+			"%s: nonzero read bulk status: status=%d, port=%d\n",
+			__func__, status, priv->dp_port_num);
 		return;
 	}
 
@@ -1650,8 +1663,9 @@ static void digi_read_bulk_callback(struct urb *urb)
 	urb->dev = port->serial->dev;
 	ret = usb_submit_urb(urb, GFP_ATOMIC);
 	if (ret != 0) {
-		err("%s: failed resubmitting urb, ret=%d, port=%d",
-		    __func__, ret, priv->dp_port_num);
+		dev_err(&port->dev,
+			"%s: failed resubmitting urb, ret=%d, port=%d\n",
+			__func__, ret, priv->dp_port_num);
 	}
 
 }
@@ -1687,10 +1701,11 @@ static int digi_read_inb_callback(struct urb *urb)
 
 	/* short/multiple packet check */
 	if (urb->actual_length != len + 2) {
-		err("%s: INCOMPLETE OR MULTIPLE PACKET, urb->status=%d, "
-		    "port=%d, opcode=%d, len=%d, actual_length=%d, "
-		    "status=%d", __func__, status, priv->dp_port_num,
-		    opcode, len, urb->actual_length, port_status);
+		dev_err(&port->dev, "%s: INCOMPLETE OR MULTIPLE PACKET, "
+			"urb->status=%d, port=%d, opcode=%d, len=%d, "
+			"actual_length=%d, status=%d\n", __func__, status,
+			priv->dp_port_num, opcode, len, urb->actual_length,
+			port_status);
 		return -1;
 	}
 
diff --git a/drivers/usb/serial/empeg.c b/drivers/usb/serial/empeg.c
index fdd28e9..8a69cce 100644
--- a/drivers/usb/serial/empeg.c
+++ b/drivers/usb/serial/empeg.c
@@ -416,7 +416,7 @@ static int  empeg_startup(struct usb_serial *serial)
 	dbg("%s", __func__);
 
 	if (serial->dev->actconfig->desc.bConfigurationValue != 1) {
-		err("active config #%d != 1 ??",
+		dev_err(&serial->dev->dev, "active config #%d != 1 ??\n",
 			serial->dev->actconfig->desc.bConfigurationValue);
 		return -ENODEV;
 	}
@@ -499,15 +499,15 @@ static int __init empeg_init(void)
 		urb = usb_alloc_urb(0, GFP_KERNEL);
 		write_urb_pool[i] = urb;
 		if (urb == NULL) {
-			err("No more urbs???");
+			printk(KERN_ERR "empeg: No more urbs???\n");
 			continue;
 		}
 
 		urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE,
 								GFP_KERNEL);
 		if (!urb->transfer_buffer) {
-			err("%s - out of memory for urb buffers.",
-			    __func__);
+			printk(KERN_ERR "empeg: %s - out of memory for urb "
+			       "buffers.", __func__);
 			continue;
 		}
 	}
diff --git a/drivers/usb/serial/ezusb.c b/drivers/usb/serial/ezusb.c
index 711e84f..3cfc762 100644
--- a/drivers/usb/serial/ezusb.c
+++ b/drivers/usb/serial/ezusb.c
@@ -28,7 +28,8 @@ int ezusb_writememory(struct usb_serial *serial, int address,
 
 	/* dbg("ezusb_writememory %x, %d", address, length); */
 	if (!serial->dev) {
-		err("%s - no physical device present, failing.", __func__);
+		printk(KERN_ERR "ezusb: %s - no physical device present, "
+		       "failing.\n", __func__);
 		return -ENODEV;
 	}
 
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index bcadb1f..51d7bde 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -1327,7 +1327,7 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
 
 	priv = kzalloc(sizeof(struct ftdi_private), GFP_KERNEL);
 	if (!priv) {
-		err("%s- kmalloc(%Zd) failed.", __func__,
+		dev_err(&port->dev, "%s- kmalloc(%Zd) failed.\n", __func__,
 					sizeof(struct ftdi_private));
 		return -ENOMEM;
 	}
@@ -1524,8 +1524,9 @@ static int ftdi_open(struct tty_struct *tty,
 			ftdi_read_bulk_callback, port);
 	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
 	if (result)
-		err("%s - failed submitting read urb, error %d",
-							__func__, result);
+		dev_err(&port->dev,
+			"%s - failed submitting read urb, error %d\n",
+			__func__, result);
 
 
 	return result;
@@ -1559,7 +1560,7 @@ static void ftdi_close(struct tty_struct *tty,
 				    FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
 				    0, priv->interface, buf, 0,
 				    WDR_TIMEOUT) < 0) {
-			err("error from flowcontrol urb");
+			dev_err(&port->dev, "error from flowcontrol urb\n");
 		}
 
 		/* drop RTS and DTR */
@@ -1624,14 +1625,15 @@ static int ftdi_write(struct tty_struct *tty, struct usb_serial_port *port,
 
 	buffer = kmalloc(transfer_size, GFP_ATOMIC);
 	if (!buffer) {
-		err("%s ran out of kernel memory for urb ...", __func__);
+		dev_err(&port->dev,
+			"%s ran out of kernel memory for urb ...\n", __func__);
 		count = -ENOMEM;
 		goto error_no_buffer;
 	}
 
 	urb = usb_alloc_urb(0, GFP_ATOMIC);
 	if (!urb) {
-		err("%s - no more free urbs", __func__);
+		dev_err(&port->dev, "%s - no more free urbs\n", __func__);
 		count = -ENOMEM;
 		goto error_no_urb;
 	}
@@ -1675,8 +1677,9 @@ static int ftdi_write(struct tty_struct *tty, struct usb_serial_port *port,
 
 	status = usb_submit_urb(urb, GFP_ATOMIC);
 	if (status) {
-		err("%s - failed submitting write urb, error %d",
-							__func__, status);
+		dev_err(&port->dev,
+			"%s - failed submitting write urb, error %d\n",
+			__func__, status);
 		count = status;
 		goto error;
 	} else {
@@ -1783,7 +1786,8 @@ static int ftdi_chars_in_buffer(struct tty_struct *tty)
 	buffered = (int)priv->tx_outstanding_bytes;
 	spin_unlock_irqrestore(&priv->tx_lock, flags);
 	if (buffered < 0) {
-		err("%s outstanding tx bytes is negative!", __func__);
+		dev_err(&port->dev, "%s outstanding tx bytes is negative!\n",
+			__func__);
 		buffered = 0;
 	}
 	return buffered;
@@ -1799,11 +1803,12 @@ static void ftdi_read_bulk_callback(struct urb *urb)
 	int status = urb->status;
 
 	if (urb->number_of_packets > 0) {
-		err("%s transfer_buffer_length %d actual_length %d number of packets %d",
-				__func__,
-				urb->transfer_buffer_length,
-				urb->actual_length, urb->number_of_packets);
-		err("%s transfer_flags %x ", __func__, urb->transfer_flags);
+		dev_err(&port->dev, "%s transfer_buffer_length %d "
+			"actual_length %d number of packets %d\n", __func__,
+			urb->transfer_buffer_length,
+			urb->actual_length, urb->number_of_packets);
+		dev_err(&port->dev, "%s transfer_flags %x\n", __func__,
+			urb->transfer_flags);
 	}
 
 	dbg("%s - port %d", __func__, port->number);
@@ -1824,7 +1829,7 @@ static void ftdi_read_bulk_callback(struct urb *urb)
 	}
 
 	if (urb != port->read_urb)
-		err("%s - Not my urb!", __func__);
+		dev_err(&port->dev, "%s - Not my urb!\n", __func__);
 
 	if (status) {
 		/* This will happen at close every time so it is a dbg not an
@@ -1927,7 +1932,8 @@ static void ftdi_process_read(struct work_struct *work)
 
 		length = min(PKTSZ, urb->actual_length-packet_offset)-2;
 		if (length < 0) {
-			err("%s - bad packet length: %d", __func__, length+2);
+			dev_err(&port->dev, "%s - bad packet length: %d\n",
+				__func__, length+2);
 			length = 0;
 		}
 
@@ -2042,8 +2048,9 @@ static void ftdi_process_read(struct work_struct *work)
 
 		result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
 		if (result)
-			err("%s - failed resubmitting read urb, error %d",
-							__func__, result);
+			dev_err(&port->dev,
+				"%s - failed resubmitting read urb, error %d\n",
+				__func__, result);
 	}
 out:
 	tty_kref_put(tty);
@@ -2072,8 +2079,8 @@ static void ftdi_break_ctl(struct tty_struct *tty, int break_state)
 			FTDI_SIO_SET_DATA_REQUEST_TYPE,
 			urb_value , priv->interface,
 			buf, 0, WDR_TIMEOUT) < 0) {
-		err("%s FAILED to enable/disable break state (state was %d)",
-							__func__, break_state);
+		dev_err(&port->dev, "%s FAILED to enable/disable break state "
+			"(state was %d)\n", __func__, break_state);
 	}
 
 	dbg("%s break state is %d - urb is %d", __func__,
@@ -2145,7 +2152,7 @@ static void ftdi_set_termios(struct tty_struct *tty,
 		case CS7: urb_value |= 7; dbg("Setting CS7"); break;
 		case CS8: urb_value |= 8; dbg("Setting CS8"); break;
 		default:
-			err("CSIZE was set but not CS5-CS8");
+			dev_err(&port->dev, "CSIZE was set but not CS5-CS8\n");
 		}
 	}
 
@@ -2158,7 +2165,8 @@ static void ftdi_set_termios(struct tty_struct *tty,
 			    FTDI_SIO_SET_DATA_REQUEST_TYPE,
 			    urb_value , priv->interface,
 			    buf, 0, WDR_SHORT_TIMEOUT) < 0) {
-		err("%s FAILED to set databits/stopbits/parity", __func__);
+		dev_err(&port->dev, "%s FAILED to set "
+			"databits/stopbits/parity\n", __func__);
 	}
 
 	/* Now do the baudrate */
@@ -2169,14 +2177,17 @@ static void ftdi_set_termios(struct tty_struct *tty,
 				    FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
 				    0, priv->interface,
 				    buf, 0, WDR_TIMEOUT) < 0) {
-			err("%s error from disable flowcontrol urb", __func__);
+			dev_err(&port->dev,
+				"%s error from disable flowcontrol urb\n",
+				__func__);
 		}
 		/* Drop RTS and DTR */
 		clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
 	} else {
 		/* set the baudrate determined before */
 		if (change_speed(tty, port))
-			err("%s urb failed to set baudrate", __func__);
+			dev_err(&port->dev, "%s urb failed to set baudrate\n",
+				__func__);
 		/* Ensure RTS and DTR are raised when baudrate changed from 0 */
 		if (!old_termios || (old_termios->c_cflag & CBAUD) == B0)
 			set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
@@ -2192,7 +2203,8 @@ static void ftdi_set_termios(struct tty_struct *tty,
 				    FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
 				    0 , (FTDI_SIO_RTS_CTS_HS | priv->interface),
 				    buf, 0, WDR_TIMEOUT) < 0) {
-			err("urb failed to set to rts/cts flow control");
+			dev_err(&port->dev,
+				"urb failed to set to rts/cts flow control\n");
 		}
 
 	} else {
@@ -2223,7 +2235,8 @@ static void ftdi_set_termios(struct tty_struct *tty,
 					    urb_value , (FTDI_SIO_XON_XOFF_HS
 							 | priv->interface),
 					    buf, 0, WDR_TIMEOUT) < 0) {
-				err("urb failed to set to xon/xoff flow control");
+				dev_err(&port->dev, "urb failed to set to "
+					"xon/xoff flow control\n");
 			}
 		} else {
 			/* else clause to only run if cflag ! CRTSCTS and iflag
@@ -2236,7 +2249,8 @@ static void ftdi_set_termios(struct tty_struct *tty,
 					    FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
 					    0, priv->interface,
 					    buf, 0, WDR_TIMEOUT) < 0) {
-				err("urb failed to clear flow control");
+				dev_err(&port->dev,
+					"urb failed to clear flow control\n");
 			}
 		}
 
diff --git a/drivers/usb/serial/io_edgeport.c b/drivers/usb/serial/io_edgeport.c
index eb95efd..e85c8c0 100644
--- a/drivers/usb/serial/io_edgeport.c
+++ b/drivers/usb/serial/io_edgeport.c
@@ -3109,13 +3109,13 @@ static int edge_startup(struct usb_serial *serial)
 				edge_serial->interrupt_read_urb =
 						usb_alloc_urb(0, GFP_KERNEL);
 				if (!edge_serial->interrupt_read_urb) {
-					err("out of memory");
+					dev_err(&dev->dev, "out of memory\n");
 					return -ENOMEM;
 				}
 				edge_serial->interrupt_in_buffer =
 					kmalloc(buffer_size, GFP_KERNEL);
 				if (!edge_serial->interrupt_in_buffer) {
-					err("out of memory");
+					dev_err(&dev->dev, "out of memory\n");
 					usb_free_urb(edge_serial->interrupt_read_urb);
 					return -ENOMEM;
 				}
@@ -3146,13 +3146,13 @@ static int edge_startup(struct usb_serial *serial)
 				edge_serial->read_urb =
 						usb_alloc_urb(0, GFP_KERNEL);
 				if (!edge_serial->read_urb) {
-					err("out of memory");
+					dev_err(&dev->dev, "out of memory\n");
 					return -ENOMEM;
 				}
 				edge_serial->bulk_in_buffer =
 					kmalloc(buffer_size, GFP_KERNEL);
 				if (!edge_serial->bulk_in_buffer) {
-					err("out of memory");
+					dev_err(&dev->dev, "out of memory\n");
 					usb_free_urb(edge_serial->read_urb);
 					return -ENOMEM;
 				}
@@ -3181,7 +3181,8 @@ static int edge_startup(struct usb_serial *serial)
 		}
 
 		if (!interrupt_in_found || !bulk_in_found || !bulk_out_found) {
-			err("Error - the proper endpoints were not found!");
+			dev_err(&dev->dev, "Error - the proper endpoints "
+				"were not found!\n");
 			return -ENODEV;
 		}
 
@@ -3190,8 +3191,9 @@ static int edge_startup(struct usb_serial *serial)
 		response = usb_submit_urb(edge_serial->interrupt_read_urb,
 								GFP_KERNEL);
 		if (response)
-			err("%s - Error %d submitting control urb",
-							__func__, response);
+			dev_err(&dev->dev,
+				"%s - Error %d submitting control urb\n",
+				__func__, response);
 	}
 	return response;
 }
diff --git a/drivers/usb/serial/ipaq.c b/drivers/usb/serial/ipaq.c
index 5108cbc..132be74 100644
--- a/drivers/usb/serial/ipaq.c
+++ b/drivers/usb/serial/ipaq.c
@@ -608,7 +608,7 @@ static int ipaq_open(struct tty_struct *tty,
 	bytes_out = 0;
 	priv = kmalloc(sizeof(struct ipaq_private), GFP_KERNEL);
 	if (priv == NULL) {
-		err("%s - Out of memory", __func__);
+		dev_err(&port->dev, "%s - Out of memory\n", __func__);
 		return -ENOMEM;
 	}
 	usb_set_serial_port_data(port, priv);
@@ -693,8 +693,7 @@ static int ipaq_open(struct tty_struct *tty,
 	}
 
 	if (!retries && result) {
-		err("%s - failed doing control urb, error %d", __func__,
-		    result);
+		dev_err(&port->dev, "%s - failed doing control urb, error %d\n",			__func__, result);
 		goto error;
 	}
 
@@ -707,8 +706,9 @@ static int ipaq_open(struct tty_struct *tty,
 
 	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
 	if (result) {
-		err("%s - failed submitting read urb, error %d",
-						__func__, result);
+		dev_err(&port->dev,
+			"%s - failed submitting read urb, error %d\n",
+			__func__, result);
 		goto error;
 	}
 
@@ -716,7 +716,7 @@ static int ipaq_open(struct tty_struct *tty,
 
 enomem:
 	result = -ENOMEM;
-	err("%s - Out of memory", __func__);
+	dev_err(&port->dev, "%s - Out of memory\n", __func__);
 error:
 	ipaq_destroy_lists(port);
 	kfree(priv);
@@ -781,8 +781,9 @@ static void ipaq_read_bulk_callback(struct urb *urb)
 	    ipaq_read_bulk_callback, port);
 	result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
 	if (result)
-		err("%s - failed resubmitting read urb, error %d",
-							__func__, result);
+		dev_err(&port->dev,
+			"%s - failed resubmitting read urb, error %d\n",
+			__func__, result);
 	return;
 }
 
@@ -847,7 +848,8 @@ static int ipaq_write_bulk(struct usb_serial_port *port,
 		spin_unlock_irqrestore(&write_list_lock, flags);
 		result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
 		if (result)
-			err("%s - failed submitting write urb, error %d",
+			dev_err(&port->dev,
+				"%s - failed submitting write urb, error %d\n",
 				__func__, result);
 	} else {
 		spin_unlock_irqrestore(&write_list_lock, flags);
@@ -909,8 +911,9 @@ static void ipaq_write_bulk_callback(struct urb *urb)
 		spin_unlock_irqrestore(&write_list_lock, flags);
 		result = usb_submit_urb(port->write_urb, GFP_ATOMIC);
 		if (result)
-			err("%s - failed submitting write urb, error %d",
-					__func__, result);
+			dev_err(&port->dev,
+				"%s - failed submitting write urb, error %d\n",
+				__func__, result);
 	} else {
 		priv->active = 0;
 		spin_unlock_irqrestore(&write_list_lock, flags);
@@ -957,7 +960,7 @@ static int ipaq_startup(struct usb_serial *serial)
 {
 	dbg("%s", __func__);
 	if (serial->dev->actconfig->desc.bConfigurationValue != 1) {
-		err("active config #%d != 1 ??",
+		dev_err(&serial->dev->dev, "active config #%d != 1 ??\n",
 			serial->dev->actconfig->desc.bConfigurationValue);
 		return -ENODEV;
 	}
diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c
index 2928ba8..bf1ae24 100644
--- a/drivers/usb/serial/keyspan_pda.c
+++ b/drivers/usb/serial/keyspan_pda.c
@@ -742,11 +742,13 @@ static int keyspan_pda_fake_startup(struct usb_serial *serial)
 		fw_name = "keyspan_pda/xircom_pgs.fw";
 #endif
 	else {
-		err("%s: unknown vendor, aborting.", __func__);
+		dev_err(&serial->dev->dev, "%s: unknown vendor, aborting.\n",
+			__func__);
 		return -ENODEV;
 	}
 	if (request_ihex_firmware(&fw, fw_name, &serial->dev->dev)) {
-		err("failed to load firmware \"%s\"\n", fw_name);
+		dev_err(&serial->dev->dev, "failed to load firmware \"%s\"\n",
+			fw_name);
 		return -ENOENT;
 	}
 	record = (const struct ihex_binrec *)fw->data;
@@ -756,10 +758,10 @@ static int keyspan_pda_fake_startup(struct usb_serial *serial)
 					     (unsigned char *)record->data,
 					     be16_to_cpu(record->len), 0xa0);
 		if (response < 0) {
-			err("ezusb_writememory failed for Keyspan PDA "
-			    "firmware (%d %04X %p %d)",
-			    response, be32_to_cpu(record->addr),
-			    record->data, be16_to_cpu(record->len));
+			dev_err(&serial->dev->dev, "ezusb_writememory failed "
+				"for Keyspan PDA firmware (%d %04X %p %d)\n",
+				response, be32_to_cpu(record->addr),
+				record->data, be16_to_cpu(record->len));
 			break;
 		}
 		record = ihex_next_binrec(record);
diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c
index 573c697..dc36a05 100644
--- a/drivers/usb/serial/kl5kusb105.c
+++ b/drivers/usb/serial/kl5kusb105.c
@@ -182,7 +182,8 @@ static int klsi_105_chg_port_settings(struct usb_serial_port *port,
 			sizeof(struct klsi_105_port_settings),
 			KLSI_TIMEOUT);
 	if (rc < 0)
-		err("Change port settings failed (error = %d)", rc);
+		dev_err(&port->dev,
+			"Change port settings failed (error = %d)\n", rc);
 	dev_info(&port->serial->dev->dev,
 		 "%d byte block, baudrate %x, databits %d, u1 %d, u2 %d\n",
 		 settings->pktlen, settings->baudrate, settings->databits,
@@ -225,7 +226,8 @@ static int klsi_105_get_line_state(struct usb_serial_port *port,
 			     10000
 			     );
 	if (rc < 0)
-		err("Reading line status failed (error = %d)", rc);
+		dev_err(&port->dev, "Reading line status failed (error = %d)\n",
+			rc);
 	else {
 		status = get_unaligned_le16(status_buf);
 
@@ -279,15 +281,16 @@ static int klsi_105_startup(struct usb_serial *serial)
 
 			priv->write_urb_pool[j] = urb;
 			if (urb == NULL) {
-				err("No more urbs???");
+				dev_err(&serial->dev->dev, "No more urbs???\n");
 				goto err_cleanup;
 			}
 
 			urb->transfer_buffer =
 				kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL);
 			if (!urb->transfer_buffer) {
-				err("%s - out of memory for urb buffers.",
-								__func__);
+				dev_err(&serial->dev->dev,
+					"%s - out of memory for urb buffers.\n",
+					__func__);
 				goto err_cleanup;
 			}
 		}
@@ -408,7 +411,8 @@ static int  klsi_105_open(struct tty_struct *tty,
 
 	rc = usb_submit_urb(port->read_urb, GFP_KERNEL);
 	if (rc) {
-		err("%s - failed submitting read urb, error %d", __func__, rc);
+		dev_err(&port->dev, "%s - failed submitting read urb, "
+			"error %d\n", __func__, rc);
 		retval = rc;
 		goto exit;
 	}
@@ -423,7 +427,7 @@ static int  klsi_105_open(struct tty_struct *tty,
 			     0,
 			     KLSI_TIMEOUT);
 	if (rc < 0) {
-		err("Enabling read failed (error = %d)", rc);
+		dev_err(&port->dev, "Enabling read failed (error = %d)\n", rc);
 		retval = rc;
 	} else
 		dbg("%s - enabled reading", __func__);
@@ -463,7 +467,8 @@ static void klsi_105_close(struct tty_struct *tty,
 				     NULL, 0,
 				     KLSI_TIMEOUT);
 		if (rc < 0)
-			err("Disabling read failed (error = %d)", rc);
+			dev_err(&port->dev,
+				"Disabling read failed (error = %d)\n", rc);
 	}
 	mutex_unlock(&port->serial->disc_mutex);
 
@@ -522,7 +527,9 @@ static int klsi_105_write(struct tty_struct *tty,
 			urb->transfer_buffer =
 				kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_ATOMIC);
 			if (urb->transfer_buffer == NULL) {
-				err("%s - no more kernel memory...", __func__);
+				dev_err(&port->dev,
+					"%s - no more kernel memory...\n",
+					__func__);
 				goto exit;
 			}
 		}
@@ -549,8 +556,9 @@ static int klsi_105_write(struct tty_struct *tty,
 		/* send the data out the bulk port */
 		result = usb_submit_urb(urb, GFP_ATOMIC);
 		if (result) {
-			err("%s - failed submitting write urb, error %d",
-							__func__, result);
+			dev_err(&port->dev,
+				"%s - failed submitting write urb, error %d\n",
+				__func__, result);
 			goto exit;
 		}
 		buf += size;
@@ -694,8 +702,9 @@ static void klsi_105_read_bulk_callback(struct urb *urb)
 		      port);
 	rc = usb_submit_urb(port->read_urb, GFP_ATOMIC);
 	if (rc)
-		err("%s - failed resubmitting read urb, error %d",
-							__func__, rc);
+		dev_err(&port->dev,
+			"%s - failed resubmitting read urb, error %d\n",
+			__func__, rc);
 } /* klsi_105_read_bulk_callback */
 
 
@@ -799,7 +808,8 @@ static void klsi_105_set_termios(struct tty_struct *tty,
 			priv->cfg.databits = kl5kusb105a_dtb_8;
 			break;
 		default:
-			err("CSIZE was not CS5-CS8, using default of 8");
+			dev_err(&port->dev,
+				"CSIZE was not CS5-CS8, using default of 8\n");
 			priv->cfg.databits = kl5kusb105a_dtb_8;
 			break;
 		}
@@ -886,7 +896,8 @@ static int klsi_105_tiocmget(struct tty_struct *tty, struct file *file)
 
 	rc = klsi_105_get_line_state(port, &line_state);
 	if (rc < 0) {
-		err("Reading line control failed (error = %d)", rc);
+		dev_err(&port->dev,
+			"Reading line control failed (error = %d)\n", rc);
 		/* better return value? EAGAIN? */
 		return rc;
 	}
@@ -944,8 +955,9 @@ static void klsi_105_unthrottle(struct tty_struct *tty)
 	port->read_urb->dev = port->serial->dev;
 	result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
 	if (result)
-		err("%s - failed submitting read urb, error %d", __func__,
-		    result);
+		dev_err(&port->dev,
+			"%s - failed submitting read urb, error %d\n",
+			__func__, result);
 }
 
 
diff --git a/drivers/usb/serial/mct_u232.c b/drivers/usb/serial/mct_u232.c
index 29fa66e..07710cf 100644
--- a/drivers/usb/serial/mct_u232.c
+++ b/drivers/usb/serial/mct_u232.c
@@ -246,7 +246,8 @@ static int mct_u232_set_baud_rate(struct tty_struct *tty,
 				0, 0, &divisor, MCT_U232_SET_BAUD_RATE_SIZE,
 				WDR_TIMEOUT);
 	if (rc < 0)	/*FIXME: What value speed results */
-		err("Set BAUD RATE %d failed (error = %d)", value, rc);
+		dev_err(&port->dev, "Set BAUD RATE %d failed (error = %d)\n",
+			value, rc);
 	else
 		tty_encode_baud_rate(tty, speed, speed);
 	dbg("set_baud_rate: value: 0x%x, divisor: 0x%x", value, divisor);
@@ -274,8 +275,9 @@ static int mct_u232_set_baud_rate(struct tty_struct *tty,
 				0, 0, &zero_byte, MCT_U232_SET_UNKNOWN1_SIZE,
 				WDR_TIMEOUT);
 	if (rc < 0)
-		err("Sending USB device request code %d failed (error = %d)",
-		    MCT_U232_SET_UNKNOWN1_REQUEST, rc);
+		dev_err(&port->dev, "Sending USB device request code %d "
+			"failed (error = %d)\n", MCT_U232_SET_UNKNOWN1_REQUEST,
+			rc);
 
 	if (port && C_CRTSCTS(tty))
 	   cts_enable_byte = 1;
@@ -288,8 +290,8 @@ static int mct_u232_set_baud_rate(struct tty_struct *tty,
 			0, 0, &cts_enable_byte, MCT_U232_SET_CTS_SIZE,
 			WDR_TIMEOUT);
 	if (rc < 0)
-		err("Sending USB device request code %d failed (error = %d)",
-					MCT_U232_SET_CTS_REQUEST, rc);
+		dev_err(&port->dev, "Sending USB device request code %d "
+			"failed (error = %d)\n", MCT_U232_SET_CTS_REQUEST, rc);
 
 	return rc;
 } /* mct_u232_set_baud_rate */
@@ -303,7 +305,8 @@ static int mct_u232_set_line_ctrl(struct usb_serial *serial, unsigned char lcr)
 			0, 0, &lcr, MCT_U232_SET_LINE_CTRL_SIZE,
 			WDR_TIMEOUT);
 	if (rc < 0)
-		err("Set LINE CTRL 0x%x failed (error = %d)", lcr, rc);
+		dev_err(&serial->dev->dev,
+			"Set LINE CTRL 0x%x failed (error = %d)\n", lcr, rc);
 	dbg("set_line_ctrl: 0x%x", lcr);
 	return rc;
 } /* mct_u232_set_line_ctrl */
@@ -325,7 +328,8 @@ static int mct_u232_set_modem_ctrl(struct usb_serial *serial,
 			0, 0, &mcr, MCT_U232_SET_MODEM_CTRL_SIZE,
 			WDR_TIMEOUT);
 	if (rc < 0)
-		err("Set MODEM CTRL 0x%x failed (error = %d)", mcr, rc);
+		dev_err(&serial->dev->dev,
+			"Set MODEM CTRL 0x%x failed (error = %d)\n", mcr, rc);
 	dbg("set_modem_ctrl: state=0x%x ==> mcr=0x%x", control_state, mcr);
 
 	return rc;
@@ -341,7 +345,8 @@ static int mct_u232_get_modem_stat(struct usb_serial *serial,
 			0, 0, msr, MCT_U232_GET_MODEM_STAT_SIZE,
 			WDR_TIMEOUT);
 	if (rc < 0) {
-		err("Get MODEM STATus failed (error = %d)", rc);
+		dev_err(&serial->dev->dev,
+			"Get MODEM STATus failed (error = %d)\n", rc);
 		*msr = 0;
 	}
 	dbg("get_modem_stat: 0x%x", *msr);
@@ -470,8 +475,9 @@ static int  mct_u232_open(struct tty_struct *tty,
 	port->read_urb->dev = port->serial->dev;
 	retval = usb_submit_urb(port->read_urb, GFP_KERNEL);
 	if (retval) {
-		err("usb_submit_urb(read bulk) failed pipe 0x%x err %d",
-		    port->read_urb->pipe, retval);
+		dev_err(&port->dev,
+			"usb_submit_urb(read bulk) failed pipe 0x%x err %d\n",
+			port->read_urb->pipe, retval);
 		goto error;
 	}
 
@@ -479,8 +485,9 @@ static int  mct_u232_open(struct tty_struct *tty,
 	retval = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL);
 	if (retval) {
 		usb_kill_urb(port->read_urb);
-		err(" usb_submit_urb(read int) failed pipe 0x%x err %d",
-		    port->interrupt_in_urb->pipe, retval);
+		dev_err(&port->dev,
+			"usb_submit_urb(read int) failed pipe 0x%x err %d",
+			port->interrupt_in_urb->pipe, retval);
 		goto error;
 	}
 	return 0;
@@ -612,8 +619,9 @@ static void mct_u232_read_int_callback(struct urb *urb)
 exit:
 	retval = usb_submit_urb(urb, GFP_ATOMIC);
 	if (retval)
-		err("%s - usb_submit_urb failed with result %d",
-		     __func__, retval);
+		dev_err(&port->dev,
+			"%s - usb_submit_urb failed with result %d\n",
+			__func__, retval);
 } /* mct_u232_read_int_callback */
 
 static void mct_u232_set_termios(struct tty_struct *tty,
@@ -680,7 +688,8 @@ static void mct_u232_set_termios(struct tty_struct *tty,
 	case CS8:
 		last_lcr |= MCT_U232_DATA_BITS_8; break;
 	default:
-		err("CSIZE was not CS5-CS8, using default of 8");
+		dev_err(&port->dev,
+			"CSIZE was not CS5-CS8, using default of 8\n");
 		last_lcr |= MCT_U232_DATA_BITS_8;
 		break;
 	}
diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c
index 5711aa5..e772cc0 100644
--- a/drivers/usb/serial/mos7720.c
+++ b/drivers/usb/serial/mos7720.c
@@ -355,14 +355,16 @@ static int mos7720_open(struct tty_struct *tty,
 		mos7720_port->write_urb_pool[j] = urb;
 
 		if (urb == NULL) {
-			err("No more urbs???");
+			dev_err(&port->dev, "No more urbs???\n");
 			continue;
 		}
 
 		urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE,
 					       GFP_KERNEL);
 		if (!urb->transfer_buffer) {
-			err("%s-out of memory for urb buffers.", __func__);
+			dev_err(&port->dev,
+				"%s-out of memory for urb buffers.\n",
+				__func__);
 			usb_free_urb(mos7720_port->write_urb_pool[j]);
 			mos7720_port->write_urb_pool[j] = NULL;
 			continue;
@@ -694,7 +696,8 @@ static int mos7720_write(struct tty_struct *tty, struct usb_serial_port *port,
 		urb->transfer_buffer = kmalloc(URB_TRANSFER_BUFFER_SIZE,
 					       GFP_KERNEL);
 		if (urb->transfer_buffer == NULL) {
-			err("%s no more kernel memory...", __func__);
+			dev_err(&port->dev, "%s no more kernel memory...\n",
+				__func__);
 			goto exit;
 		}
 	}
@@ -714,8 +717,8 @@ static int mos7720_write(struct tty_struct *tty, struct usb_serial_port *port,
 	/* send it down the pipe */
 	status = usb_submit_urb(urb, GFP_ATOMIC);
 	if (status) {
-		err("%s - usb_submit_urb(write bulk) failed with status = %d",
-		    __func__, status);
+		dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed "
+			"with status = %d\n", __func__, status);
 		bytes_sent = status;
 		goto exit;
 	}
@@ -975,7 +978,7 @@ static int send_cmd_write_baud_rate(struct moschip_port *mos7720_port,
 	/* Calculate the Divisor */
 	status = calc_baud_rate_divisor(baudrate, &divisor);
 	if (status) {
-		err("%s - bad baud rate", __func__);
+		dev_err(&port->dev, "%s - bad baud rate\n", __func__);
 		return status;
 	}
 
@@ -1478,7 +1481,7 @@ static int mos7720_startup(struct usb_serial *serial)
 	/* create our private serial structure */
 	mos7720_serial = kzalloc(sizeof(struct moschip_serial), GFP_KERNEL);
 	if (mos7720_serial == NULL) {
-		err("%s - Out of memory", __func__);
+		dev_err(&dev->dev, "%s - Out of memory\n", __func__);
 		return -ENOMEM;
 	}
 
@@ -1491,7 +1494,7 @@ static int mos7720_startup(struct usb_serial *serial)
 	for (i = 0; i < serial->num_ports; ++i) {
 		mos7720_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL);
 		if (mos7720_port == NULL) {
-			err("%s - Out of memory", __func__);
+			dev_err(&dev->dev, "%s - Out of memory\n", __func__);
 			usb_set_serial_data(serial, NULL);
 			kfree(mos7720_serial);
 			return -ENOMEM;
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index d5f6826..fda4a64 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -844,7 +844,7 @@ static int mos7840_open(struct tty_struct *tty,
 		mos7840_port->write_urb_pool[j] = urb;
 
 		if (urb == NULL) {
-			err("No more urbs???");
+			dev_err(&port->dev, "No more urbs???\n");
 			continue;
 		}
 
@@ -853,7 +853,9 @@ static int mos7840_open(struct tty_struct *tty,
 		if (!urb->transfer_buffer) {
 			usb_free_urb(urb);
 			mos7840_port->write_urb_pool[j] = NULL;
-			err("%s-out of memory for urb buffers.", __func__);
+			dev_err(&port->dev,
+				"%s-out of memory for urb buffers.\n",
+				__func__);
 			continue;
 		}
 	}
@@ -1021,8 +1023,8 @@ static int mos7840_open(struct tty_struct *tty,
 			    usb_submit_urb(serial->port[0]->interrupt_in_urb,
 					   GFP_KERNEL);
 			if (response) {
-				err("%s - Error %d submitting interrupt urb",
-				    __func__, response);
+				dev_err(&port->dev, "%s - Error %d submitting "
+					"interrupt urb\n", __func__, response);
 			}
 
 		}
@@ -1055,8 +1057,8 @@ static int mos7840_open(struct tty_struct *tty,
 	    port->bulk_in_endpointAddress);
 	response = usb_submit_urb(mos7840_port->read_urb, GFP_KERNEL);
 	if (response) {
-		err("%s - Error %d submitting control urb", __func__,
-		    response);
+		dev_err(&port->dev, "%s - Error %d submitting control urb\n",
+			__func__, response);
 	}
 
 	/* initialize our wait queues */
@@ -1492,7 +1494,8 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
 		    kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL);
 
 		if (urb->transfer_buffer == NULL) {
-			err("%s no more kernel memory...", __func__);
+			dev_err(&port->dev, "%s no more kernel memory...\n",
+				__func__);
 			goto exit;
 		}
 	}
@@ -1517,8 +1520,8 @@ static int mos7840_write(struct tty_struct *tty, struct usb_serial_port *port,
 
 	if (status) {
 		mos7840_port->busy[i] = 0;
-		err("%s - usb_submit_urb(write bulk) failed with status = %d",
-		    __func__, status);
+		dev_err(&port->dev, "%s - usb_submit_urb(write bulk) failed "
+			"with status = %d\n", __func__, status);
 		bytes_sent = status;
 		goto exit;
 	}
@@ -1856,8 +1859,7 @@ static int mos7840_send_cmd_write_baud_rate(struct moschip_port *mos7840_port,
 		/* Calculate the Divisor */
 
 		if (status) {
-			err("%s - bad baud rate", __func__);
-			dbg("%s\n", "bad baud rate");
+			dev_err(&port->dev, "%s - bad baud rate\n", __func__);
 			return status;
 		}
 		/* Enable access to divisor latch */
@@ -2446,7 +2448,7 @@ static int mos7840_startup(struct usb_serial *serial)
 	for (i = 0; i < serial->num_ports; ++i) {
 		mos7840_port = kzalloc(sizeof(struct moschip_port), GFP_KERNEL);
 		if (mos7840_port == NULL) {
-			err("%s - Out of memory", __func__);
+			dev_err(&dev->dev, "%s - Out of memory\n", __func__);
 			status = -ENOMEM;
 			i--; /* don't follow NULL pointer cleaning up */
 			goto error;
diff --git a/drivers/usb/serial/omninet.c b/drivers/usb/serial/omninet.c
index 9890f26..df65397 100644
--- a/drivers/usb/serial/omninet.c
+++ b/drivers/usb/serial/omninet.c
@@ -154,8 +154,8 @@ static int omninet_attach(struct usb_serial *serial)
 
 	od = kmalloc(sizeof(struct omninet_data), GFP_KERNEL);
 	if (!od) {
-		err("%s- kmalloc(%Zd) failed.",
-				__func__, sizeof(struct omninet_data));
+		dev_err(&port->dev, "%s- kmalloc(%Zd) failed.\n",
+			__func__, sizeof(struct omninet_data));
 		return -ENOMEM;
 	}
 	usb_set_serial_port_data(port, od);
@@ -183,8 +183,9 @@ static int omninet_open(struct tty_struct *tty,
 			omninet_read_bulk_callback, port);
 	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
 	if (result)
-		err("%s - failed submitting read urb, error %d",
-							__func__, result);
+		dev_err(&port->dev,
+			"%s - failed submitting read urb, error %d\n",
+			__func__, result);
 	return result;
 }
 
@@ -244,8 +245,9 @@ static void omninet_read_bulk_callback(struct urb *urb)
 			omninet_read_bulk_callback, port);
 	result = usb_submit_urb(urb, GFP_ATOMIC);
 	if (result)
-		err("%s - failed resubmitting read urb, error %d",
-						__func__, result);
+		dev_err(&port->dev,
+			"%s - failed resubmitting read urb, error %d\n",
+			__func__, result);
 
 	return;
 }
@@ -298,8 +300,9 @@ static int omninet_write(struct tty_struct *tty, struct usb_serial_port *port,
 	result = usb_submit_urb(wport->write_urb, GFP_ATOMIC);
 	if (result) {
 		wport->write_urb_busy = 0;
-		err("%s - failed submitting write urb, error %d",
-							__func__, result);
+		dev_err(&port->dev,
+			"%s - failed submitting write urb, error %d\n",
+			__func__, result);
 	} else
 		result = count;
 
diff --git a/drivers/usb/serial/safe_serial.c b/drivers/usb/serial/safe_serial.c
index 40cff61..4b463cd 100644
--- a/drivers/usb/serial/safe_serial.c
+++ b/drivers/usb/serial/safe_serial.c
@@ -256,11 +256,12 @@ static void safe_read_bulk_callback(struct urb *urb)
 							data, actual_length);
 				tty_flip_buffer_push(tty);
 			} else {
-				err("%s - inconsistent lengths %d:%d",
+				dev_err(&port->dev,
+					"%s - inconsistent lengths %d:%d\n",
 					__func__, actual_length, length);
 			}
 		} else {
-			err("%s - bad CRC %x", __func__, fcs);
+			dev_err(&port->dev, "%s - bad CRC %x\n", __func__, fcs);
 		}
 	} else {
 		tty_insert_flip_string(tty, data, length);
@@ -277,8 +278,9 @@ static void safe_read_bulk_callback(struct urb *urb)
 
 	result = usb_submit_urb(urb, GFP_ATOMIC);
 	if (result)
-		err("%s - failed resubmitting read urb, error %d",
-							__func__, result);
+		dev_err(&port->dev,
+			"%s - failed resubmitting read urb, error %d\n",
+			__func__, result);
 		/* FIXME: Need a mechanism to retry later if this happens */
 }
 
@@ -369,8 +371,9 @@ static int safe_write(struct tty_struct *tty, struct usb_serial_port *port,
 	result = usb_submit_urb(port->write_urb, GFP_KERNEL);
 	if (result) {
 		port->write_urb_busy = 0;
-		err("%s - failed submitting write urb, error %d",
-							__func__, result);
+		dev_err(&port->dev,
+			"%s - failed submitting write urb, error %d\n",
+			__func__, result);
 		return 0;
 	}
 	dbg("%s urb: %p submitted", __func__, port->write_urb);
diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c
index 96aeec7..a65bc2b 100644
--- a/drivers/usb/serial/spcp8x5.c
+++ b/drivers/usb/serial/spcp8x5.c
@@ -589,8 +589,8 @@ static void spcp8x5_set_termios(struct tty_struct *tty,
 	case 1000000:
 			buf[0] = 0x0b;	break;
 	default:
-		err("spcp825 driver does not support the baudrate "
-		    "requested, using default of 9600.");
+		dev_err(&port->dev, "spcp825 driver does not support the "
+			"baudrate requested, using default of 9600.\n");
 	}
 
 	/* Set Data Length : 00:5bit, 01:6bit, 10:7bit, 11:8bit */
@@ -629,7 +629,8 @@ static void spcp8x5_set_termios(struct tty_struct *tty,
 			    SET_UART_FORMAT_TYPE, SET_UART_FORMAT,
 			    uartdata, 0, NULL, 0, 100);
 	if (i < 0)
-		err("Set UART format %#x failed (error = %d)", uartdata, i);
+		dev_err(&port->dev, "Set UART format %#x failed (error = %d)\n",
+			uartdata, i);
 	dbg("0x21:0x40:0:0  %d\n", i);
 
 	if (cflag & CRTSCTS) {
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index 92ba4f7..8be3f39 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -1121,7 +1121,8 @@ static int __init usb_serial_init(void)
 
 	result = bus_register(&usb_serial_bus_type);
 	if (result) {
-		err("%s - registering bus driver failed", __func__);
+		printk(KERN_ERR "usb-serial: %s - registering bus driver "
+		       "failed\n", __func__);
 		goto exit_bus;
 	}
 
@@ -1142,21 +1143,24 @@ static int __init usb_serial_init(void)
 	tty_set_operations(usb_serial_tty_driver, &serial_ops);
 	result = tty_register_driver(usb_serial_tty_driver);
 	if (result) {
-		err("%s - tty_register_driver failed", __func__);
+		printk(KERN_ERR "usb-serial: %s - tty_register_driver failed\n",
+		       __func__);
 		goto exit_reg_driver;
 	}
 
 	/* register the USB driver */
 	result = usb_register(&usb_serial_driver);
 	if (result < 0) {
-		err("%s - usb_register failed", __func__);
+		printk(KERN_ERR "usb-serial: %s - usb_register failed\n",
+		       __func__);
 		goto exit_tty;
 	}
 
 	/* register the generic driver, if we should */
 	result = usb_serial_generic_register(debug);
 	if (result < 0) {
-		err("%s - registering generic driver failed", __func__);
+		printk(KERN_ERR "usb-serial: %s - registering generic "
+		       "driver failed\n", __func__);
 		goto exit_generic;
 	}
 
@@ -1174,7 +1178,8 @@ exit_reg_driver:
 	bus_unregister(&usb_serial_bus_type);
 
 exit_bus:
-	err("%s - returning with error %d", __func__, result);
+	printk(KERN_ERR "usb-serial: %s - returning with error %d\n",
+	       __func__, result);
 	put_tty_driver(usb_serial_tty_driver);
 	return result;
 }
@@ -1233,8 +1238,8 @@ int usb_serial_register(struct usb_serial_driver *driver)
 
 	retval = usb_serial_bus_register(driver);
 	if (retval) {
-		err("problem %d when registering driver %s",
-						retval, driver->description);
+		printk(KERN_ERR "usb-serial: problem %d when registering "
+		       "driver %s\n", retval, driver->description);
 		list_del(&driver->driver_list);
 	} else
 		printk(KERN_INFO "USB Serial support registered for %s\n",
diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
index de4b5f0..4facce3 100644
--- a/drivers/usb/serial/visor.c
+++ b/drivers/usb/serial/visor.c
@@ -768,7 +768,7 @@ static int visor_probe(struct usb_serial *serial,
 	dbg("%s", __func__);
 
 	if (serial->dev->actconfig->desc.bConfigurationValue != 1) {
-		err("active config #%d != 1 ??",
+		dev_err(&serial->dev->dev, "active config #%d != 1 ??\n",
 			serial->dev->actconfig->desc.bConfigurationValue);
 		return -ENODEV;
 	}
diff --git a/drivers/usb/serial/whiteheat.c b/drivers/usb/serial/whiteheat.c
index 39f7f8d..5335d32 100644
--- a/drivers/usb/serial/whiteheat.c
+++ b/drivers/usb/serial/whiteheat.c
@@ -303,12 +303,15 @@ static int whiteheat_firmware_download(struct usb_serial *serial,
 
 	if (request_ihex_firmware(&firmware_fw, "whiteheat.fw",
 				  &serial->dev->dev)) {
-		err("%s - request \"whiteheat.fw\" failed", __func__);
+		dev_err(&serial->dev->dev,
+			"%s - request \"whiteheat.fw\" failed\n", __func__);
 		goto out;
 	}
 	if (request_ihex_firmware(&loader_fw, "whiteheat_loader.fw",
 			     &serial->dev->dev)) {
-		err("%s - request \"whiteheat_loader.fw\" failed", __func__);
+		dev_err(&serial->dev->dev,
+			"%s - request \"whiteheat_loader.fw\" failed\n",
+			__func__);
 		goto out;
 	}
 	ret = 0;
@@ -320,9 +323,10 @@ static int whiteheat_firmware_download(struct usb_serial *serial,
 					      (unsigned char *)record->data,
 					      be16_to_cpu(record->len), 0xa0);
 		if (response < 0) {
-			err("%s - ezusb_writememory failed for loader (%d %04X %p %d)",
-			    __func__, response, be32_to_cpu(record->addr),
-			    record->data, be16_to_cpu(record->len));
+			dev_err(&serial->dev->dev, "%s - ezusb_writememory "
+				"failed for loader (%d %04X %p %d)\n",
+				__func__, response, be32_to_cpu(record->addr),
+				record->data, be16_to_cpu(record->len));
 			break;
 		}
 		record = ihex_next_binrec(record);
@@ -338,9 +342,11 @@ static int whiteheat_firmware_download(struct usb_serial *serial,
 					      (unsigned char *)record->data,
 					      be16_to_cpu(record->len), 0xa3);
 		if (response < 0) {
-			err("%s - ezusb_writememory failed for first firmware step (%d %04X %p %d)", 
-			    __func__, response, be32_to_cpu(record->addr),
-			    record->data, be16_to_cpu(record->len));
+			dev_err(&serial->dev->dev, "%s - ezusb_writememory "
+				"failed for first firmware step "
+				"(%d %04X %p %d)\n", __func__, response,
+				be32_to_cpu(record->addr), record->data,
+				be16_to_cpu(record->len));
 			break;
 		}
 		++record;
@@ -354,9 +360,11 @@ static int whiteheat_firmware_download(struct usb_serial *serial,
 					      (unsigned char *)record->data,
 					      be16_to_cpu(record->len), 0xa0);
 		if (response < 0) {
-			err("%s - ezusb_writememory failed for second firmware step (%d %04X %p %d)", 
-			    __func__, response, be32_to_cpu(record->addr),
-			    record->data, be16_to_cpu(record->len));
+			dev_err(&serial->dev->dev, "%s - ezusb_writememory "
+				"failed for second firmware step "
+				"(%d %04X %p %d)\n", __func__, response,
+				be32_to_cpu(record->addr), record->data,
+				be16_to_cpu(record->len));
 			break;
 		}
 		++record;
@@ -421,12 +429,12 @@ static int whiteheat_attach(struct usb_serial *serial)
 	ret = usb_bulk_msg(serial->dev, pipe, command, 2,
 						&alen, COMMAND_TIMEOUT_MS);
 	if (ret) {
-		err("%s: Couldn't send command [%d]",
-				serial->type->description, ret);
+		dev_err(&serial->dev->dev, "%s: Couldn't send command [%d]\n",
+			serial->type->description, ret);
 		goto no_firmware;
 	} else if (alen != 2) {
-		err("%s: Send command incomplete [%d]",
-				serial->type->description, alen);
+		dev_err(&serial->dev->dev, "%s: Send command incomplete [%d]\n",
+			serial->type->description, alen);
 		goto no_firmware;
 	}
 
@@ -437,16 +445,16 @@ static int whiteheat_attach(struct usb_serial *serial)
 	ret = usb_bulk_msg(serial->dev, pipe, result,
 			sizeof(*hw_info) + 1, &alen, COMMAND_TIMEOUT_MS);
 	if (ret) {
-		err("%s: Couldn't get results [%d]",
-				serial->type->description, ret);
+		dev_err(&serial->dev->dev, "%s: Couldn't get results [%d]\n",
+			serial->type->description, ret);
 		goto no_firmware;
 	} else if (alen != sizeof(*hw_info) + 1) {
-		err("%s: Get results incomplete [%d]",
-				serial->type->description, alen);
+		dev_err(&serial->dev->dev, "%s: Get results incomplete [%d]\n",
+			serial->type->description, alen);
 		goto no_firmware;
 	} else if (result[0] != command[0]) {
-		err("%s: Command failed [%d]",
-				serial->type->description, result[0]);
+		dev_err(&serial->dev->dev, "%s: Command failed [%d]\n",
+			serial->type->description, result[0]);
 		goto no_firmware;
 	}
 
@@ -461,8 +469,9 @@ static int whiteheat_attach(struct usb_serial *serial)
 
 		info = kmalloc(sizeof(struct whiteheat_private), GFP_KERNEL);
 		if (info == NULL) {
-			err("%s: Out of memory for port structures\n",
-					serial->type->description);
+			dev_err(&port->dev,
+				"%s: Out of memory for port structures\n",
+				serial->type->description);
 			goto no_private;
 		}
 
@@ -482,18 +491,20 @@ static int whiteheat_attach(struct usb_serial *serial)
 		for (j = 0; j < urb_pool_size; j++) {
 			urb = usb_alloc_urb(0, GFP_KERNEL);
 			if (!urb) {
-				err("No free urbs available");
+				dev_err(&port->dev, "No free urbs available\n");
 				goto no_rx_urb;
 			}
 			buf_size = port->read_urb->transfer_buffer_length;
 			urb->transfer_buffer = kmalloc(buf_size, GFP_KERNEL);
 			if (!urb->transfer_buffer) {
-				err("Couldn't allocate urb buffer");
+				dev_err(&port->dev,
+					"Couldn't allocate urb buffer\n");
 				goto no_rx_buf;
 			}
 			wrap = kmalloc(sizeof(*wrap), GFP_KERNEL);
 			if (!wrap) {
-				err("Couldn't allocate urb wrapper");
+				dev_err(&port->dev,
+					"Couldn't allocate urb wrapper\n");
 				goto no_rx_wrap;
 			}
 			usb_fill_bulk_urb(urb, serial->dev,
@@ -506,18 +517,20 @@ static int whiteheat_attach(struct usb_serial *serial)
 
 			urb = usb_alloc_urb(0, GFP_KERNEL);
 			if (!urb) {
-				err("No free urbs available");
+				dev_err(&port->dev, "No free urbs available\n");
 				goto no_tx_urb;
 			}
 			buf_size = port->write_urb->transfer_buffer_length;
 			urb->transfer_buffer = kmalloc(buf_size, GFP_KERNEL);
 			if (!urb->transfer_buffer) {
-				err("Couldn't allocate urb buffer");
+				dev_err(&port->dev,
+					"Couldn't allocate urb buffer\n");
 				goto no_tx_buf;
 			}
 			wrap = kmalloc(sizeof(*wrap), GFP_KERNEL);
 			if (!wrap) {
-				err("Couldn't allocate urb wrapper");
+				dev_err(&port->dev,
+					"Couldn't allocate urb wrapper\n");
 				goto no_tx_wrap;
 			}
 			usb_fill_bulk_urb(urb, serial->dev,
@@ -535,8 +548,9 @@ static int whiteheat_attach(struct usb_serial *serial)
 	command_info = kmalloc(sizeof(struct whiteheat_command_private),
 								GFP_KERNEL);
 	if (command_info == NULL) {
-		err("%s: Out of memory for port structures\n",
-					serial->type->description);
+		dev_err(&serial->dev->dev,
+			"%s: Out of memory for port structures\n",
+			serial->type->description);
 		goto no_command_private;
 	}
 
@@ -553,12 +567,15 @@ static int whiteheat_attach(struct usb_serial *serial)
 
 no_firmware:
 	/* Firmware likely not running */
-	err("%s: Unable to retrieve firmware version, try replugging\n",
-					serial->type->description);
-	err("%s: If the firmware is not running (status led not blinking)\n",
-					serial->type->description);
-	err("%s: please contact support@connecttech.com\n",
-					serial->type->description);
+	dev_err(&serial->dev->dev,
+		"%s: Unable to retrieve firmware version, try replugging\n",
+		serial->type->description);
+	dev_err(&serial->dev->dev,
+		"%s: If the firmware is not running (status led not blinking)\n",
+		serial->type->description);
+	dev_err(&serial->dev->dev,
+		"%s: please contact support@connecttech.com\n",
+		serial->type->description);
 	kfree(result);
 	return -ENODEV;
 
@@ -681,8 +698,9 @@ static int whiteheat_open(struct tty_struct *tty,
 	/* Start reading from the device */
 	retval = start_port_read(port);
 	if (retval) {
-		err("%s - failed submitting read urb, error %d",
-				__func__, retval);
+		dev_err(&port->dev,
+			"%s - failed submitting read urb, error %d\n",
+			__func__, retval);
 		firm_close(port);
 		stop_command_port(port->serial);
 		goto exit;
@@ -807,8 +825,9 @@ static int whiteheat_write(struct tty_struct *tty,
 		urb->transfer_buffer_length = bytes;
 		result = usb_submit_urb(urb, GFP_ATOMIC);
 		if (result) {
-			err("%s - failed submitting write urb, error %d",
-							__func__, result);
+			dev_err(&port->dev,
+				"%s - failed submitting write urb, error %d\n",
+				__func__, result);
 			sent = result;
 			spin_lock_irqsave(&info->lock, flags);
 			list_add(tmp, &info->tx_urbs_free);
@@ -1076,7 +1095,7 @@ static void whiteheat_read_callback(struct urb *urb)
 	wrap = urb_to_wrap(urb, &info->rx_urbs_submitted);
 	if (!wrap) {
 		spin_unlock(&info->lock);
-		err("%s - Not my urb!", __func__);
+		dev_err(&port->dev, "%s - Not my urb!\n", __func__);
 		return;
 	}
 	list_del(&wrap->list);
@@ -1120,7 +1139,7 @@ static void whiteheat_write_callback(struct urb *urb)
 	wrap = urb_to_wrap(urb, &info->tx_urbs_submitted);
 	if (!wrap) {
 		spin_unlock(&info->lock);
-		err("%s - Not my urb!", __func__);
+		dev_err(&port->dev, "%s - Not my urb!\n", __func__);
 		return;
 	}
 	list_move(&wrap->list, &info->tx_urbs_free);
@@ -1384,8 +1403,9 @@ static int start_command_port(struct usb_serial *serial)
 		command_port->read_urb->dev = serial->dev;
 		retval = usb_submit_urb(command_port->read_urb, GFP_KERNEL);
 		if (retval) {
-			err("%s - failed submitting read urb, error %d",
-							__func__, retval);
+			dev_err(&serial->dev->dev,
+				"%s - failed submitting read urb, error %d\n",
+				__func__, retval);
 			goto exit;
 		}
 	}
@@ -1523,7 +1543,8 @@ static void rx_data_softint(struct work_struct *work)
 		urb->dev = port->serial->dev;
 		result = usb_submit_urb(urb, GFP_ATOMIC);
 		if (result) {
-			err("%s - failed resubmitting read urb, error %d",
+			dev_err(&port->dev,
+				"%s - failed resubmitting read urb, error %d\n",
 				__func__, result);
 			spin_lock_irqsave(&info->lock, flags);
 			list_add(tmp, &info->rx_urbs_free);
-- 
cgit v1.1