From 4f0c64120041fc92a35cd1fe84562b7abcd7aeb7 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 14 Sep 2012 11:50:35 -0700 Subject: USB: serial: ssu100.c: remove dbg() usage dbg() was a very old USB-serial-specific macro. This patch removes it from being used in the driver and uses dev_dbg() instead. CC: Alan Stern CC: Rusty Russell CC: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ssu100.c | 32 ++++++++++++++++---------------- 1 file changed, 16 insertions(+), 16 deletions(-) (limited to 'drivers/usb/serial/ssu100.c') diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c index 3fee23b..e719661 100644 --- a/drivers/usb/serial/ssu100.c +++ b/drivers/usb/serial/ssu100.c @@ -135,7 +135,7 @@ static inline int update_mctrl(struct usb_device *dev, unsigned int set, int result; if (((set | clear) & (TIOCM_DTR | TIOCM_RTS)) == 0) { - dbg("%s - DTR|RTS not being set|cleared", __func__); + dev_dbg(&dev->dev, "%s - DTR|RTS not being set|cleared\n", __func__); return 0; /* no change */ } @@ -148,7 +148,7 @@ static inline int update_mctrl(struct usb_device *dev, unsigned int set, result = ssu100_setregister(dev, 0, UART_MCR, urb_value); if (result < 0) - dbg("%s Error from MODEM_CTRL urb", __func__); + dev_dbg(&dev->dev, "%s Error from MODEM_CTRL urb\n", __func__); return result; } @@ -164,7 +164,7 @@ static int ssu100_initdevice(struct usb_device *dev) result = ssu100_getdevice(dev, data); if (result < 0) { - dbg("%s - get_device failed %i", __func__, result); + dev_dbg(&dev->dev, "%s - get_device failed %i\n", __func__, result); goto out; } @@ -172,25 +172,25 @@ static int ssu100_initdevice(struct usb_device *dev) result = ssu100_setdevice(dev, data); if (result < 0) { - dbg("%s - setdevice failed %i", __func__, result); + dev_dbg(&dev->dev, "%s - setdevice failed %i\n", __func__, result); goto out; } result = ssu100_control_msg(dev, QT_GET_SET_PREBUF_TRIG_LVL, 128, 0); if (result < 0) { - dbg("%s - set prebuffer level failed %i", __func__, result); + dev_dbg(&dev->dev, "%s - set prebuffer level failed %i\n", __func__, result); goto out; } result = ssu100_control_msg(dev, QT_SET_ATF, ATC_DISABLED, 0); if (result < 0) { - dbg("%s - set ATFprebuffer level failed %i", __func__, result); + dev_dbg(&dev->dev, "%s - set ATFprebuffer level failed %i\n", __func__, result); goto out; } result = ssu100_getdevice(dev, data); if (result < 0) { - dbg("%s - get_device failed %i", __func__, result); + dev_dbg(&dev->dev, "%s - get_device failed %i\n", __func__, result); goto out; } @@ -201,7 +201,7 @@ static int ssu100_initdevice(struct usb_device *dev) result = ssu100_setdevice(dev, data); if (result < 0) { - dbg("%s - setdevice failed %i", __func__, result); + dev_dbg(&dev->dev, "%s - setdevice failed %i\n", __func__, result); goto out; } @@ -249,7 +249,7 @@ static void ssu100_set_termios(struct tty_struct *tty, if (!baud) baud = 9600; - dbg("%s - got baud = %d\n", __func__, baud); + dev_dbg(&port->dev, "%s - got baud = %d\n", __func__, baud); divisor = MAX_BAUD_RATE / baud; @@ -261,7 +261,7 @@ static void ssu100_set_termios(struct tty_struct *tty, result = ssu100_control_msg(dev, QT_GET_SET_UART, divisor, urb_value); if (result < 0) - dbg("%s - set uart failed", __func__); + dev_dbg(&port->dev, "%s - set uart failed\n", __func__); if (cflag & CRTSCTS) result = ssu100_control_msg(dev, QT_HW_FLOW_CONTROL_MASK, @@ -270,7 +270,7 @@ static void ssu100_set_termios(struct tty_struct *tty, result = ssu100_control_msg(dev, QT_HW_FLOW_CONTROL_MASK, 0, 0); if (result < 0) - dbg("%s - set HW flow control failed", __func__); + dev_dbg(&port->dev, "%s - set HW flow control failed\n", __func__); if (I_IXOFF(tty) || I_IXON(tty)) { u16 x = ((u16)(START_CHAR(tty) << 8) | (u16)(STOP_CHAR(tty))); @@ -282,7 +282,7 @@ static void ssu100_set_termios(struct tty_struct *tty, 0, 0); if (result < 0) - dbg("%s - set SW flow control failed", __func__); + dev_dbg(&port->dev, "%s - set SW flow control failed\n", __func__); } @@ -304,7 +304,7 @@ static int ssu100_open(struct tty_struct *tty, struct usb_serial_port *port) QT_TRANSFER_IN, 0x01, 0, data, 2, 300); if (result < 0) { - dbg("%s - open failed %i", __func__, result); + dev_dbg(&port->dev, "%s - open failed %i\n", __func__, result); kfree(data); return result; } @@ -319,7 +319,7 @@ static int ssu100_open(struct tty_struct *tty, struct usb_serial_port *port) /* set to 9600 */ result = ssu100_control_msg(dev, QT_GET_SET_UART, 0x30, 0x0300); if (result < 0) - dbg("%s - set uart failed", __func__); + dev_dbg(&port->dev, "%s - set uart failed\n", __func__); if (tty) ssu100_set_termios(tty, port, tty->termios); @@ -423,7 +423,7 @@ static int ssu100_ioctl(struct tty_struct *tty, { struct usb_serial_port *port = tty->driver_data; - dbg("%s cmd 0x%04x", __func__, cmd); + dev_dbg(&port->dev, "%s cmd 0x%04x\n", __func__, cmd); switch (cmd) { case TIOCGSERIAL: @@ -437,7 +437,7 @@ static int ssu100_ioctl(struct tty_struct *tty, break; } - dbg("%s arg not supported", __func__); + dev_dbg(&port->dev, "%s arg not supported\n", __func__); return -ENOIOCTLCMD; } -- cgit v1.1 From 186f3812f5005d3d5435f69f672971afdae3e732 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Fri, 14 Sep 2012 12:32:00 -0700 Subject: USB: serial: ssu100.c: remove debug module parameter Now that the dbg() macro is no longer being used in the driver, the debug module parameter doesn't do anything at all. So remove it so as to not confuse people. CC: Alan Stern CC: Rusty Russell CC: Mauro Carvalho Chehab Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/ssu100.c | 5 ----- 1 file changed, 5 deletions(-) (limited to 'drivers/usb/serial/ssu100.c') diff --git a/drivers/usb/serial/ssu100.c b/drivers/usb/serial/ssu100.c index e719661..6635743 100644 --- a/drivers/usb/serial/ssu100.c +++ b/drivers/usb/serial/ssu100.c @@ -46,8 +46,6 @@ #define FULLPWRBIT 0x00000080 #define NEXT_BOARD_POWER_BIT 0x00000004 -static bool debug; - /* Version Information */ #define DRIVER_VERSION "v0.1" #define DRIVER_DESC "Quatech SSU-100 USB to Serial Driver" @@ -668,6 +666,3 @@ module_usb_serial_driver(serial_drivers, id_table); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); - -module_param(debug, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(debug, "Debug enabled or not"); -- cgit v1.1