From e198a31489146bb723fef179e5d1d18c8225f246 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Thu, 15 Mar 2007 15:54:30 -0400 Subject: EHCI: add delay to bus_resume before accessing ports This patch (as870) adds a delay to ehci-hcd's bus_resume routine. Apparently there are controllers and/or BIOSes out there which need such a delay to get the ports back into their correct state. This fixes Bugzilla #8190. Signed-off-by: Alan Stern Cc: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-hub.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/usb/host') diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 1813b7ca..f4d301b 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -136,6 +136,10 @@ static int ehci_bus_resume (struct usb_hcd *hcd) /* restore CMD_RUN, framelist size, and irq threshold */ ehci_writel(ehci, ehci->command, &ehci->regs->command); + /* Some controller/firmware combinations need a delay during which + * they set up the port statuses. See Bugzilla #8190. */ + mdelay(8); + /* manually resume the ports we suspended during bus_suspend() */ i = HCS_N_PORTS (ehci->hcs_params); while (i--) { -- cgit v1.1