From 6e3d4bec6b1e0829ed8b23be750762255f225019 Mon Sep 17 00:00:00 2001 From: Keshava Munegowda Date: Thu, 21 Apr 2011 19:52:43 +0530 Subject: omap:usb: add regulator support for EHCI in case of ehci phy mode; regulator of phy should be enabled before initializing the usbhs core driver. Signed-off-by: Keshava Munegowda Tested-by: Steve Calfee Signed-off-by: Felipe Balbi --- drivers/usb/host/ehci-omap.c | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) (limited to 'drivers/usb/host') diff --git a/drivers/usb/host/ehci-omap.c b/drivers/usb/host/ehci-omap.c index 7e41a95..627f3a6 100644 --- a/drivers/usb/host/ehci-omap.c +++ b/drivers/usb/host/ehci-omap.c @@ -40,6 +40,7 @@ #include #include #include +#include /* EHCI Register Set */ #define EHCI_INSNREG04 (0xA0) @@ -118,6 +119,8 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) struct ehci_hcd *omap_ehci; int ret = -ENODEV; int irq; + int i; + char supply[7]; if (usb_disabled()) return -ENODEV; @@ -158,6 +161,23 @@ static int ehci_hcd_omap_probe(struct platform_device *pdev) hcd->rsrc_len = resource_size(res); hcd->regs = regs; + /* get ehci regulator and enable */ + for (i = 0 ; i < OMAP3_HS_USB_PORTS ; i++) { + if (pdata->port_mode[i] != OMAP_EHCI_PORT_MODE_PHY) { + pdata->regulator[i] = NULL; + continue; + } + snprintf(supply, sizeof(supply), "hsusb%d", i); + pdata->regulator[i] = regulator_get(dev, supply); + if (IS_ERR(pdata->regulator[i])) { + pdata->regulator[i] = NULL; + dev_dbg(dev, + "failed to get ehci port%d regulator\n", i); + } else { + regulator_enable(pdata->regulator[i]); + } + } + ret = omap_usbhs_enable(dev); if (ret) { dev_err(dev, "failed to start usbhs with err %d\n", ret); -- cgit v1.1 From d93da492d9a8840a0bdda88e74df8d0f593f1977 Mon Sep 17 00:00:00 2001 From: Arvid Brodin Date: Tue, 26 Apr 2011 21:46:47 +0200 Subject: usb/isp1760: Report correct urb status after unlink This fixes a bug in my previous (2.6.38) patch series which caused urb->status value to be wrong after unlink (broke usbtest 11, 12). Signed-off-by: Arvid Brodin Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/isp1760-hcd.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/usb/host') diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c index 795345a..7b2e69a 100644 --- a/drivers/usb/host/isp1760-hcd.c +++ b/drivers/usb/host/isp1760-hcd.c @@ -1633,6 +1633,7 @@ static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) ints[i].qh = NULL; ints[i].qtd = NULL; + urb->status = status; isp1760_urb_done(hcd, urb); if (qtd) pe(hcd, qh, qtd); -- cgit v1.1 From 4f0871a6c7811a433513c3788a7cce27033bb8b8 Mon Sep 17 00:00:00 2001 From: Andiry Xu Date: Tue, 19 Apr 2011 17:17:39 +0800 Subject: xHCI: Clear PLC in xhci_bus_resume() This patch clears PORT_PLC if xhci_bus_resume() resumes a previous suspended port, because if a port transition from U3 to U0 state, it will report a port link state change, and software should clear the corresponding PLC bit. It also uses hcd->speed to check if a port is a USB2 protocol port. The patch fixes the issue that USB keyboard can not wakeup system from hibernation. Signed-off-by: Andiry Xu Signed-off-by: Sarah Sharp --- drivers/usb/host/xhci-hub.c | 19 +++++++++++++++++-- 1 file changed, 17 insertions(+), 2 deletions(-) (limited to 'drivers/usb/host') diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index a78f2eb..73f75d2 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -777,7 +777,7 @@ int xhci_bus_suspend(struct usb_hcd *hcd) if (t1 != t2) xhci_writel(xhci, t2, port_array[port_index]); - if (DEV_HIGHSPEED(t1)) { + if (hcd->speed != HCD_USB3) { /* enable remote wake up for USB 2.0 */ u32 __iomem *addr; u32 tmp; @@ -866,6 +866,21 @@ int xhci_bus_resume(struct usb_hcd *hcd) temp |= PORT_LINK_STROBE | XDEV_U0; xhci_writel(xhci, temp, port_array[port_index]); } + /* wait for the port to enter U0 and report port link + * state change. + */ + spin_unlock_irqrestore(&xhci->lock, flags); + msleep(20); + spin_lock_irqsave(&xhci->lock, flags); + + /* Clear PLC */ + temp = xhci_readl(xhci, port_array[port_index]); + if (temp & PORT_PLC) { + temp = xhci_port_state_to_neutral(temp); + temp |= PORT_PLC; + xhci_writel(xhci, temp, port_array[port_index]); + } + slot_id = xhci_find_slot_id_by_port(hcd, xhci, port_index + 1); if (slot_id) @@ -873,7 +888,7 @@ int xhci_bus_resume(struct usb_hcd *hcd) } else xhci_writel(xhci, temp, port_array[port_index]); - if (DEV_HIGHSPEED(temp)) { + if (hcd->speed != HCD_USB3) { /* disable remote wake up for USB 2.0 */ u32 __iomem *addr; u32 tmp; -- cgit v1.1