From c73cee717e7d5da0698acb720ad1219646fe4f46 Mon Sep 17 00:00:00 2001 From: Alan Stern Date: Wed, 31 Oct 2012 13:21:06 -0400 Subject: USB: EHCI: remove ehci_port_power() routine This patch (as1623) removes the ehci_port_power() routine and all the places that call it. There's no reason for ehci-hcd to change the port power settings; the hub driver takes care of all that stuff. There is one exception: When the controller is resumed from hibernation or following a loss of power, the ports that are supposed to be handed over to a companion controller must be powered on first. Otherwise the handover won't work. This process is not visible to the hub driver, so it has to be handled in ehci-hcd. Signed-off-by: Alan Stern Signed-off-by: Greg Kroah-Hartman --- drivers/usb/host/ehci-sh.c | 9 +-------- 1 file changed, 1 insertion(+), 8 deletions(-) (limited to 'drivers/usb/host/ehci-sh.c') diff --git a/drivers/usb/host/ehci-sh.c b/drivers/usb/host/ehci-sh.c index 6081e1e..0c90a24 100644 --- a/drivers/usb/host/ehci-sh.c +++ b/drivers/usb/host/ehci-sh.c @@ -21,17 +21,10 @@ struct ehci_sh_priv { static int ehci_sh_reset(struct usb_hcd *hcd) { struct ehci_hcd *ehci = hcd_to_ehci(hcd); - int ret; ehci->caps = hcd->regs; - ret = ehci_setup(hcd); - if (unlikely(ret)) - return ret; - - ehci_port_power(ehci, 0); - - return ret; + return ehci_setup(hcd); } static const struct hc_driver ehci_sh_hc_driver = { -- cgit v1.1