From 5a59bc544d00923ff715e2fe68ea537153f52dda Mon Sep 17 00:00:00 2001 From: Robert Jarzmik Date: Mon, 12 May 2008 10:47:56 -0700 Subject: USB: pxa27x_udc: minor fixes Minor fixes to pxa27x udc driver : - don't clobber driver model bus_id field - wrong endianess fix (no functional change; cpu is little-endian) - double udc disable fix - resume/suspend fix (OTG hold bit) - make driver pxa27x dependant (check cpu at runtime) Signed-off-by: Robert Jarzmik Signed-off-by: David Brownell Signed-off-by: Greg Kroah-Hartman --- drivers/usb/gadget/pxa27x_udc.c | 17 ++++++++--------- drivers/usb/gadget/pxa27x_udc.h | 8 ++++++++ 2 files changed, 16 insertions(+), 9 deletions(-) (limited to 'drivers/usb/gadget') diff --git a/drivers/usb/gadget/pxa27x_udc.c b/drivers/usb/gadget/pxa27x_udc.c index 75eba20..499b7a2 100644 --- a/drivers/usb/gadget/pxa27x_udc.c +++ b/drivers/usb/gadget/pxa27x_udc.c @@ -1546,7 +1546,6 @@ static __init void udc_init_data(struct pxa_udc *dev) INIT_LIST_HEAD(&dev->gadget.ep0->ep_list); dev->udc_usb_ep[0].pxa_ep = &dev->pxa_ep[0]; ep0_idle(dev); - strcpy(dev->dev->bus_id, ""); /* PXA endpoints init */ for (i = 0; i < NR_PXA_ENDPOINTS; i++) { @@ -1746,13 +1745,10 @@ static void handle_ep0_ctrl_req(struct pxa_udc *udc, ep_err(ep, "wrong to have extra bytes for setup : 0x%08x\n", i); } - le16_to_cpus(&u.r.wValue); - le16_to_cpus(&u.r.wIndex); - le16_to_cpus(&u.r.wLength); - ep_dbg(ep, "SETUP %02x.%02x v%04x i%04x l%04x\n", u.r.bRequestType, u.r.bRequest, - u.r.wValue, u.r.wIndex, u.r.wLength); + le16_to_cpu(u.r.wValue), le16_to_cpu(u.r.wIndex), + le16_to_cpu(u.r.wLength)); if (unlikely(have_extrabytes)) goto stall; @@ -2296,7 +2292,8 @@ static void pxa_udc_shutdown(struct platform_device *_dev) { struct pxa_udc *udc = platform_get_drvdata(_dev); - udc_disable(udc); + if (udc_readl(udc, UDCCR) & UDCCR_UDE) + udc_disable(udc); } #ifdef CONFIG_PM @@ -2361,9 +2358,8 @@ static int pxa_udc_resume(struct platform_device *_dev) * Upon exit from sleep mode and before clearing OTGPH, * Software must configure the USB OTG pad, UDC, and UHC * to the state they were in before entering sleep mode. - * - * Should be : PSSR |= PSSR_OTGPH; */ + PSSR |= PSSR_OTGPH; return 0; } @@ -2387,6 +2383,9 @@ static struct platform_driver udc_driver = { static int __init udc_init(void) { + if (!cpu_is_pxa27x()) + return -ENODEV; + printk(KERN_INFO "%s: version %s\n", driver_name, DRIVER_VERSION); return platform_driver_probe(&udc_driver, pxa_udc_probe); } diff --git a/drivers/usb/gadget/pxa27x_udc.h b/drivers/usb/gadget/pxa27x_udc.h index 1d1b793..97453db 100644 --- a/drivers/usb/gadget/pxa27x_udc.h +++ b/drivers/usb/gadget/pxa27x_udc.h @@ -484,4 +484,12 @@ static inline struct pxa_udc *to_gadget_udc(struct usb_gadget *gadget) #define ep_warn(ep, fmt, arg...) \ dev_warn(ep->dev->dev, "%s:%s:" fmt, EPNAME(ep), __func__, ## arg) +/* + * Cannot include pxa-regs.h, as register names are similar. + * So PSSR is redefined here. This should be removed once UDC registers will + * be gone from pxa-regs.h. + */ +#define PSSR __REG(0x40F00004) /* Power Manager Sleep Status */ +#define PSSR_OTGPH (1 << 6) /* OTG Peripheral Hold */ + #endif /* __LINUX_USB_GADGET_PXA27X_H */ -- cgit v1.1