From 460d098cb6728134e0e4ba3d58e10bb43032daa5 Mon Sep 17 00:00:00 2001 From: Huang Rui Date: Fri, 31 Oct 2014 11:11:18 +0800 Subject: usb: dwc3: make HIRD threshold configurable HIRD threshold should be configurable by different platforms. From DesignWare databook: When HIRD_Threshold[4] is set to 1b1 and HIRD value is greater than or equal to the value in HIRD_Threshold[3:0], dwc3 asserts output signals utmi_l1_suspend_n to put PHY into Deep Low-Power mode in L1. When HIRD_Threshold[4] is set to 1b0 or the HIRD value is less than HIRD_Threshold[3:0], dwc3 asserts output signals utmi_sleep_n on L1. Signed-off-by: Huang Rui Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/gadget.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) (limited to 'drivers/usb/dwc3/gadget.c') diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 88a065f..398c12f 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -2295,11 +2295,7 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc) reg = dwc3_readl(dwc->regs, DWC3_DCTL); reg &= ~(DWC3_DCTL_HIRD_THRES_MASK | DWC3_DCTL_L1_HIBER_EN); - /* - * TODO: This should be configurable. For now using - * maximum allowed HIRD threshold value of 0b1100 - */ - reg |= DWC3_DCTL_HIRD_THRES(12); + reg |= DWC3_DCTL_HIRD_THRES(dwc->hird_threshold); /* * When dwc3 revisions >= 2.40a, LPM Erratum is enabled and -- cgit v1.1