From f91b55ab72a913a8a61e377a7766772a20f0d96b Mon Sep 17 00:00:00 2001 From: Russell King Date: Sat, 6 Oct 2012 10:50:58 +0100 Subject: SERIAL: omap: move driver private definitions and structures to driver struct uart_omap_port and struct uart_omap_dma, and associated definitions are private to the driver, so there's no point them sitting in an include file under arch/arm. Move them into the driver itself. Signed-off-by: Russell King --- drivers/tty/serial/omap-serial.c | 52 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 52 insertions(+) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index da46be3..17babde 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -44,6 +44,8 @@ #include +#define OMAP_MAX_HSUART_PORTS 6 + #define UART_BUILD_REVISION(x, y) (((x) << 8) | (y)) #define OMAP_UART_REV_42 0x0402 @@ -51,10 +53,14 @@ #define OMAP_UART_REV_52 0x0502 #define OMAP_UART_REV_63 0x0603 +#define UART_ERRATA_i202_MDR1_ACCESS BIT(0) +#define UART_ERRATA_i291_DMA_FORCEIDLE BIT(1) + #define DEFAULT_CLK_SPEED 48000000 /* 48Mhz*/ /* SCR register bitmasks */ #define OMAP_UART_SCR_RX_TRIG_GRANU1_MASK (1 << 7) +#define OMAP_UART_SCR_TX_EMPTY (1 << 3) /* FCR register bitmasks */ #define OMAP_UART_FCR_RX_FIFO_TRIG_MASK (0x3 << 6) @@ -71,6 +77,52 @@ #define OMAP_UART_MVR_MAJ_SHIFT 8 #define OMAP_UART_MVR_MIN_MASK 0x3f +#define OMAP_UART_DMA_CH_FREE -1 + +#define MSR_SAVE_FLAGS UART_MSR_ANY_DELTA +#define OMAP_MODE13X_SPEED 230400 + +/* WER = 0x7F + * Enable module level wakeup in WER reg + */ +#define OMAP_UART_WER_MOD_WKUP 0X7F + +/* Enable XON/XOFF flow control on output */ +#define OMAP_UART_SW_TX 0x4 + +/* Enable XON/XOFF flow control on input */ +#define OMAP_UART_SW_RX 0x4 + +#define OMAP_UART_SW_CLR 0xF0 + +#define OMAP_UART_TCR_TRIG 0x0F + +struct uart_omap_dma { + u8 uart_dma_tx; + u8 uart_dma_rx; + int rx_dma_channel; + int tx_dma_channel; + dma_addr_t rx_buf_dma_phys; + dma_addr_t tx_buf_dma_phys; + unsigned int uart_base; + /* + * Buffer for rx dma.It is not required for tx because the buffer + * comes from port structure. + */ + unsigned char *rx_buf; + unsigned int prev_rx_dma_pos; + int tx_buf_size; + int tx_dma_used; + int rx_dma_used; + spinlock_t tx_lock; + spinlock_t rx_lock; + /* timer to poll activity on rx dma */ + struct timer_list rx_timer; + unsigned int rx_buf_size; + unsigned int rx_poll_rate; + unsigned int rx_timeout; +}; + struct uart_omap_port { struct uart_port port; struct uart_omap_dma uart_dma; -- cgit v1.1