From c3d8b76f61586714cdc5f219ba45592a54caaa55 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Wed, 21 Mar 2012 20:15:18 +0100 Subject: serial: PL011: move interrupt clearing Commit 360f748b204275229f8398cb2f9f53955db1503b "serial: PL011: clear pending interrupts" attempts to clear interrupts by writing to a yet-unassigned memory address. This fixes the issue. The breaking patch is marked for stable so should be carried along with the other patch. Cc: Shreshtha Kumar Sahu Cc: Russell King Cc: stable Cc: Nicolas Pitre Reported-by: Viresh Kumar Signed-off-by: Linus Walleij Tested-by: Grant Likely Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/amba-pl011.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index 0c65c9e..3d569cd 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -1946,10 +1946,6 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id) goto unmap; } - /* Ensure interrupts from this UART are masked and cleared */ - writew(0, uap->port.membase + UART011_IMSC); - writew(0xffff, uap->port.membase + UART011_ICR); - uap->vendor = vendor; uap->lcrh_rx = vendor->lcrh_rx; uap->lcrh_tx = vendor->lcrh_tx; @@ -1967,6 +1963,10 @@ static int pl011_probe(struct amba_device *dev, const struct amba_id *id) uap->port.line = i; pl011_dma_probe(uap); + /* Ensure interrupts from this UART are masked and cleared */ + writew(0, uap->port.membase + UART011_IMSC); + writew(0xffff, uap->port.membase + UART011_ICR); + snprintf(uap->type, sizeof(uap->type), "PL011 rev%u", amba_rev(dev)); amba_ports[i] = uap; -- cgit v1.1 From 388bc26226807fbcf4c626b81bb17a2e74aa4b1b Mon Sep 17 00:00:00 2001 From: Shubhrajyoti D Date: Wed, 21 Mar 2012 17:22:22 +0530 Subject: omap-serial: Fix the error handling in the omap_serial probe The patch does the following - The pm_runtime_disable is called in the remove not in the error case of probe.The patch calls the pm_runtime_disable in the error case. - Calls pm_runtime_put in the error case. - The up is not freed in the error path. Fix the memory leak by using devm_* so that the memory need not be freed in the driver. - Also the iounmap is not called fix the same by calling using devm_ioremap. - Make the name of the error tags more meaningful. Cc: Mark Brown Cc: Govindraj.R Signed-off-by: Shubhrajyoti D Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/omap-serial.c | 43 +++++++++++++++++++--------------------- 1 file changed, 20 insertions(+), 23 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c index 0121486..d00b38e 100644 --- a/drivers/tty/serial/omap-serial.c +++ b/drivers/tty/serial/omap-serial.c @@ -1381,29 +1381,24 @@ static int serial_omap_probe(struct platform_device *pdev) return -ENODEV; } - if (!request_mem_region(mem->start, resource_size(mem), + if (!devm_request_mem_region(&pdev->dev, mem->start, resource_size(mem), pdev->dev.driver->name)) { dev_err(&pdev->dev, "memory region already claimed\n"); return -EBUSY; } dma_rx = platform_get_resource_byname(pdev, IORESOURCE_DMA, "rx"); - if (!dma_rx) { - ret = -EINVAL; - goto err; - } + if (!dma_rx) + return -ENXIO; dma_tx = platform_get_resource_byname(pdev, IORESOURCE_DMA, "tx"); - if (!dma_tx) { - ret = -EINVAL; - goto err; - } + if (!dma_tx) + return -ENXIO; + + up = devm_kzalloc(&pdev->dev, sizeof(*up), GFP_KERNEL); + if (!up) + return -ENOMEM; - up = kzalloc(sizeof(*up), GFP_KERNEL); - if (up == NULL) { - ret = -ENOMEM; - goto do_release_region; - } up->pdev = pdev; up->port.dev = &pdev->dev; up->port.type = PORT_OMAP; @@ -1423,16 +1418,17 @@ static int serial_omap_probe(struct platform_device *pdev) dev_err(&pdev->dev, "failed to get alias/pdev id, errno %d\n", up->port.line); ret = -ENODEV; - goto err; + goto err_port_line; } sprintf(up->name, "OMAP UART%d", up->port.line); up->port.mapbase = mem->start; - up->port.membase = ioremap(mem->start, resource_size(mem)); + up->port.membase = devm_ioremap(&pdev->dev, mem->start, + resource_size(mem)); if (!up->port.membase) { dev_err(&pdev->dev, "can't ioremap UART\n"); ret = -ENOMEM; - goto err; + goto err_ioremap; } up->port.flags = omap_up_info->flags; @@ -1478,16 +1474,19 @@ static int serial_omap_probe(struct platform_device *pdev) ret = uart_add_one_port(&serial_omap_reg, &up->port); if (ret != 0) - goto do_release_region; + goto err_add_port; pm_runtime_put(&pdev->dev); platform_set_drvdata(pdev, up); return 0; -err: + +err_add_port: + pm_runtime_put(&pdev->dev); + pm_runtime_disable(&pdev->dev); +err_ioremap: +err_port_line: dev_err(&pdev->dev, "[UART%d]: failure [%s]: %d\n", pdev->id, __func__, ret); -do_release_region: - release_mem_region(mem->start, resource_size(mem)); return ret; } @@ -1499,8 +1498,6 @@ static int serial_omap_remove(struct platform_device *dev) pm_runtime_disable(&up->pdev->dev); uart_remove_one_port(&serial_omap_reg, &up->port); pm_qos_remove_request(&up->pm_qos_request); - - kfree(up); } platform_set_drvdata(dev, NULL); -- cgit v1.1 From acede70d6561f2d042d9dbb153d9a3469479c0ed Mon Sep 17 00:00:00 2001 From: Yuriy Kozlov Date: Thu, 29 Mar 2012 09:55:27 +0200 Subject: tty: serial: altera_uart: Check for NULL platform_data in probe. Follow altera_jtag_uart. This fixes a crash if there is a mistake in the DTS. Signed-off-by: Yuriy Kozlov Signed-off-by: Tobias Klauser Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/altera_uart.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/altera_uart.c b/drivers/tty/serial/altera_uart.c index e790375..1f03309 100644 --- a/drivers/tty/serial/altera_uart.c +++ b/drivers/tty/serial/altera_uart.c @@ -556,7 +556,7 @@ static int __devinit altera_uart_probe(struct platform_device *pdev) res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); if (res_mem) port->mapbase = res_mem->start; - else if (platp->mapbase) + else if (platp) port->mapbase = platp->mapbase; else return -EINVAL; @@ -564,7 +564,7 @@ static int __devinit altera_uart_probe(struct platform_device *pdev) res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); if (res_irq) port->irq = res_irq->start; - else if (platp->irq) + else if (platp) port->irq = platp->irq; /* Check platform data first so we can override device node data */ -- cgit v1.1 From 57c3686842114de3b0c00633591e9605c46fb769 Mon Sep 17 00:00:00 2001 From: "Siftar, Gabe" Date: Thu, 29 Mar 2012 15:40:05 +0200 Subject: tty/serial: atmel_serial: fix RS485 half-duplex problem On our custom board, we are using RS485 in half-duplex mode on an AT91SAM9G45. SER_RS485_RX_DURING_TX is not set as we do not want to receive the data we transmit (our transceiver will receive transmitted data). Although the current driver attempts to disable and enable the receiver at the appropriate points, incoming data is still loaded into the receive register causing our code to receive the very last byte that was sent once the receiver is enabled. I ran this by Atmel support and they wrote: "The issue comes from the fact that you disable the PDC/DMA Reception and not the USART Reception channel. In your case, the[n] you will still receive data into the USART_RHR register, and maybe you [h]ave the overrun flag set. So please disable the USART reception channel." The following patch should force the driver to enable/disable the receiver via RXEN/RXDIS fields of the USART control register. It fixed the issue I was having. Signed-off-by: Gabe Siftar [nicolas.ferre@atmel.com: slightly modify commit message] Signed-off-by: Nicolas Ferre Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/atmel_serial.c | 4 ++++ 1 file changed, 4 insertions(+) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/atmel_serial.c b/drivers/tty/serial/atmel_serial.c index f9a6be7..3d7e1ee 100644 --- a/drivers/tty/serial/atmel_serial.c +++ b/drivers/tty/serial/atmel_serial.c @@ -389,6 +389,8 @@ static void atmel_start_rx(struct uart_port *port) { UART_PUT_CR(port, ATMEL_US_RSTSTA); /* reset status and receiver */ + UART_PUT_CR(port, ATMEL_US_RXEN); + if (atmel_use_dma_rx(port)) { /* enable PDC controller */ UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT | @@ -404,6 +406,8 @@ static void atmel_start_rx(struct uart_port *port) */ static void atmel_stop_rx(struct uart_port *port) { + UART_PUT_CR(port, ATMEL_US_RXDIS); + if (atmel_use_dma_rx(port)) { /* disable PDC receive */ UART_PUT_PTCR(port, ATMEL_PDC_RXTDIS); -- cgit v1.1 From 5da527aafed2834852fc4fe21daeaeadf7c61af3 Mon Sep 17 00:00:00 2001 From: Kay Sievers Date: Tue, 3 Apr 2012 03:18:23 +0200 Subject: printk(): add KERN_CONT where needed in hpet and vt code A prototype for kmsg records instead of a byte-stream buffer revealed a couple of missing printk(KERN_CONT ...) uses. Subsequent calls produce one record per printk() call, while all should have ended up in a single record. Instead of: ACPI: (supports S0 S5) ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) hpet0: at MMIO 0xfed00000, IRQs 2 , 8 , 0 It prints: ACPI: (supports S0 S5 ) ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11 ) hpet0: at MMIO 0xfed00000, IRQs 2 , 8 , 0 Cc: Andrew Morton Cc: Len Brown Signed-off-by: Kay Sievers Signed-off-by: Greg Kroah-Hartman --- drivers/tty/vt/vt.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/vt/vt.c b/drivers/tty/vt/vt.c index 3bdd4b1..2156188 100644 --- a/drivers/tty/vt/vt.c +++ b/drivers/tty/vt/vt.c @@ -2932,11 +2932,10 @@ static int __init con_init(void) gotoxy(vc, vc->vc_x, vc->vc_y); csi_J(vc, 0); update_screen(vc); - pr_info("Console: %s %s %dx%d", + pr_info("Console: %s %s %dx%d\n", vc->vc_can_do_color ? "colour" : "mono", display_desc, vc->vc_cols, vc->vc_rows); printable = 1; - printk("\n"); console_unlock(); -- cgit v1.1 From 7b246a1d0dfe75346a22bf6589b858a0389e6df1 Mon Sep 17 00:00:00 2001 From: Kukjin Kim Date: Tue, 3 Apr 2012 18:14:24 -0700 Subject: serial: samsung: fix omission initialize ulcon in reset port fn() Fix omission initialize ulcon in s3c24xx_serial_resetport(), reset port function in drivers/tty/serial/samsung.c. It has been happened from commit 0dfb3b41("serial: samsung: merge all SoC specific port reset functions") Signed-off-by: Kukjin Kim Cc: stable [3.3] Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/samsung.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/samsung.c b/drivers/tty/serial/samsung.c index de249d2..d8b0aee 100644 --- a/drivers/tty/serial/samsung.c +++ b/drivers/tty/serial/samsung.c @@ -982,6 +982,7 @@ static void s3c24xx_serial_resetport(struct uart_port *port, ucon &= ucon_mask; wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); + wr_regl(port, S3C2410_ULCON, cfg->ulcon); /* reset both fifos */ wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); -- cgit v1.1 From d8c4019b41aaf4d6401a4ceb3819b8e1afe21595 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 2 Apr 2012 16:32:17 -0600 Subject: tty/serial/omap: console can only be built-in When the omap serial driver is built as a module, we must not allow the console driver to be selected, because consoles can not be loadable modules. Signed-off-by: Arnd Bergmann Signed-off-by: Mathieu Poirier Acked-by: Govindraj.R Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/Kconfig | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig index 665beb6..070b442 100644 --- a/drivers/tty/serial/Kconfig +++ b/drivers/tty/serial/Kconfig @@ -1041,7 +1041,7 @@ config SERIAL_OMAP config SERIAL_OMAP_CONSOLE bool "Console on OMAP serial port" - depends on SERIAL_OMAP + depends on SERIAL_OMAP=y select SERIAL_CORE_CONSOLE help Select this option if you would like to use omap serial port as -- cgit v1.1 From 3579812373aba92b2f3b632bdf99329bc3c05d62 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 6 Apr 2012 11:49:37 -0700 Subject: Revert "serial/8250_pci: init-quirk msi support for kt serial controller" This reverts commit e86ff4a63c9fdd875ba8492577cd1ad2252f525c. This tried to enforce the semantics of one interrupt per iir read of the THRE (transmit-hold empty) status, but events from other sources (particularly modem status) defeat this guarantee. This change also broke 8250_pci suspend/resume support as pciserial_resume_ports() re-runs .init() quirks, but does not run .exit() quirks in pciserial_suspend_ports() leading to reports like: sysfs: cannot create duplicate filename '/devices/pci0000:00/0000:00:16.3/msi_irqs' ...and a subsequent crash. The mismatch of init/exit at suspend/resume seems like a bug in its own right. [stable: 3.3.x] Cc: stable Acked-by: Alan Cox Cc: Sudhakar Mamillapalli Reported-by: Nhan H Mai Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_pci.c | 14 -------------- 1 file changed, 14 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index da2b0b0..1d4ccf8 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1118,18 +1118,6 @@ pci_xr17c154_setup(struct serial_private *priv, return pci_default_setup(priv, board, port, idx); } -static int try_enable_msi(struct pci_dev *dev) -{ - /* use msi if available, but fallback to legacy otherwise */ - pci_enable_msi(dev); - return 0; -} - -static void disable_msi(struct pci_dev *dev) -{ - pci_disable_msi(dev); -} - #define PCI_VENDOR_ID_SBSMODULARIO 0x124B #define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B #define PCI_DEVICE_ID_OCTPRO 0x0001 @@ -1249,9 +1237,7 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .device = PCI_DEVICE_ID_INTEL_PATSBURG_KT, .subvendor = PCI_ANY_ID, .subdevice = PCI_ANY_ID, - .init = try_enable_msi, .setup = kt_serial_setup, - .exit = disable_msi, }, /* * ITE -- cgit v1.1 From 49b532f96fda23663f8be35593d1c1372c0f91e0 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 6 Apr 2012 11:49:44 -0700 Subject: Revert "serial/8250_pci: setup-quirk workaround for the kt serial controller" This reverts commit 448ac154c957c4580531fa0c8f2045816fe2f0e7. The semantic of UPF_IIR_ONCE is only guaranteed to workaround the race condition in the kt serial's iir register if the only source of interrupts is THRE (fifo-empty) events. An modem status event at the wrong time can again cause an iir read to drop the 'empty' status leading to a hang. So, revert this in preparation for using the existing "I don't trust my iir register" workaround in the 8250 core (UART_BUG_THRE). [stable: 3.3.x] Cc: stable Acked-by: Alan Cox Cc: Sudhakar Mamillapalli Reported-by: Nhan H Mai Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250.c | 4 +--- drivers/tty/serial/8250/8250_pci.c | 17 +---------------- 2 files changed, 2 insertions(+), 19 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c index 5b149b4..56492d2 100644 --- a/drivers/tty/serial/8250/8250.c +++ b/drivers/tty/serial/8250/8250.c @@ -1572,13 +1572,11 @@ static irqreturn_t serial8250_interrupt(int irq, void *dev_id) do { struct uart_8250_port *up; struct uart_port *port; - bool skip; up = list_entry(l, struct uart_8250_port, list); port = &up->port; - skip = pass_counter && up->port.flags & UPF_IIR_ONCE; - if (!skip && port->handle_irq(port)) { + if (port->handle_irq(port)) { handled = 1; end = NULL; } else if (end == NULL) diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 1d4ccf8..105dcfb 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1092,14 +1092,6 @@ static int skip_tx_en_setup(struct serial_private *priv, return pci_default_setup(priv, board, port, idx); } -static int kt_serial_setup(struct serial_private *priv, - const struct pciserial_board *board, - struct uart_port *port, int idx) -{ - port->flags |= UPF_IIR_ONCE; - return skip_tx_en_setup(priv, board, port, idx); -} - static int pci_eg20t_init(struct pci_dev *dev) { #if defined(CONFIG_SERIAL_PCH_UART) || defined(CONFIG_SERIAL_PCH_UART_MODULE) @@ -1118,6 +1110,7 @@ pci_xr17c154_setup(struct serial_private *priv, return pci_default_setup(priv, board, port, idx); } +/* This should be in linux/pci_ids.h */ #define PCI_VENDOR_ID_SBSMODULARIO 0x124B #define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B #define PCI_DEVICE_ID_OCTPRO 0x0001 @@ -1147,7 +1140,6 @@ pci_xr17c154_setup(struct serial_private *priv, #define PCI_DEVICE_ID_OXSEMI_16PCI958 0x9538 #define PCIE_DEVICE_ID_NEO_2_OX_IBM 0x00F6 #define PCI_DEVICE_ID_PLX_CRONYX_OMEGA 0xc001 -#define PCI_DEVICE_ID_INTEL_PATSBURG_KT 0x1d3d /* Unknown vendors/cards - this should not be in linux/pci_ids.h */ #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584 @@ -1232,13 +1224,6 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .subdevice = PCI_ANY_ID, .setup = ce4100_serial_setup, }, - { - .vendor = PCI_VENDOR_ID_INTEL, - .device = PCI_DEVICE_ID_INTEL_PATSBURG_KT, - .subvendor = PCI_ANY_ID, - .subdevice = PCI_ANY_ID, - .setup = kt_serial_setup, - }, /* * ITE */ -- cgit v1.1 From bc02d15a3452fdf9276e8fb89c5e504a88df888a Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Fri, 6 Apr 2012 11:49:50 -0700 Subject: serial/8250_pci: add a "force background timer" flag and use it for the "kt" serial port Workaround dropped notifications in the iir register. Register reads coincident with new interrupt notifications sometimes result in this device clearing the interrupt event without reporting it in the read data. The serial core already has a heuristic for determining when a device has an untrustworthy iir register. In this case when we apriori know that the iir is faulty use a flag (UPF_BUG_THRE) to bypass the test and force usage of the background timer. [stable: 3.3.x] Acked-by: Alan Cox Cc: stable Reported-by: Nhan H Mai Reported-by: Sudhakar Mamillapalli Tested-by: Nhan H Mai Tested-by: Sudhakar Mamillapalli Signed-off-by: Dan Williams Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250.c | 8 +++++--- drivers/tty/serial/8250/8250_pci.c | 17 ++++++++++++++++- 2 files changed, 21 insertions(+), 4 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c index 56492d2..5c27f7e 100644 --- a/drivers/tty/serial/8250/8250.c +++ b/drivers/tty/serial/8250/8250.c @@ -2035,10 +2035,12 @@ static int serial8250_startup(struct uart_port *port) spin_unlock_irqrestore(&port->lock, flags); /* - * If the interrupt is not reasserted, setup a timer to - * kick the UART on a regular basis. + * If the interrupt is not reasserted, or we otherwise + * don't trust the iir, setup a timer to kick the UART + * on a regular basis. */ - if (!(iir1 & UART_IIR_NO_INT) && (iir & UART_IIR_NO_INT)) { + if ((!(iir1 & UART_IIR_NO_INT) && (iir & UART_IIR_NO_INT)) || + up->port.flags & UPF_BUG_THRE) { up->bugs |= UART_BUG_THRE; pr_debug("ttyS%d - using backup timer\n", serial_index(port)); diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 105dcfb..858dca8 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1092,6 +1092,14 @@ static int skip_tx_en_setup(struct serial_private *priv, return pci_default_setup(priv, board, port, idx); } +static int kt_serial_setup(struct serial_private *priv, + const struct pciserial_board *board, + struct uart_port *port, int idx) +{ + port->flags |= UPF_BUG_THRE; + return skip_tx_en_setup(priv, board, port, idx); +} + static int pci_eg20t_init(struct pci_dev *dev) { #if defined(CONFIG_SERIAL_PCH_UART) || defined(CONFIG_SERIAL_PCH_UART_MODULE) @@ -1110,7 +1118,6 @@ pci_xr17c154_setup(struct serial_private *priv, return pci_default_setup(priv, board, port, idx); } -/* This should be in linux/pci_ids.h */ #define PCI_VENDOR_ID_SBSMODULARIO 0x124B #define PCI_SUBVENDOR_ID_SBSMODULARIO 0x124B #define PCI_DEVICE_ID_OCTPRO 0x0001 @@ -1140,6 +1147,7 @@ pci_xr17c154_setup(struct serial_private *priv, #define PCI_DEVICE_ID_OXSEMI_16PCI958 0x9538 #define PCIE_DEVICE_ID_NEO_2_OX_IBM 0x00F6 #define PCI_DEVICE_ID_PLX_CRONYX_OMEGA 0xc001 +#define PCI_DEVICE_ID_INTEL_PATSBURG_KT 0x1d3d /* Unknown vendors/cards - this should not be in linux/pci_ids.h */ #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584 @@ -1224,6 +1232,13 @@ static struct pci_serial_quirk pci_serial_quirks[] __refdata = { .subdevice = PCI_ANY_ID, .setup = ce4100_serial_setup, }, + { + .vendor = PCI_VENDOR_ID_INTEL, + .device = PCI_DEVICE_ID_INTEL_PATSBURG_KT, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .setup = kt_serial_setup, + }, /* * ITE */ -- cgit v1.1 From 867c902e07d5677e2a5b54c0435e589513abde48 Mon Sep 17 00:00:00 2001 From: Tomoya MORINAGA Date: Mon, 2 Apr 2012 14:36:22 +0900 Subject: pch_uart: Fix MSI setting issue The following patch (MSI setting) is not enough. commit e463595fd9c752fa4bf06b47df93ef9ade3c7cf0 Author: Alexander Stein Date: Mon Jul 4 08:58:31 2011 +0200 pch_uart: Add MSI support Signed-off-by: Alexander Stein Signed-off-by: Greg Kroah-Hartman To enable MSI mode, PCI bus-mastering must be enabled. This patch enables the setting. cc: Alexander Stein Signed-off-by: Tomoya MORINAGA Cc: stable Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/pch_uart.c | 1 + 1 file changed, 1 insertion(+) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index e825460..afa060f 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -1655,6 +1655,7 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev, } pci_enable_msi(pdev); + pci_set_master(pdev); iobase = pci_resource_start(pdev, 0); mapbase = pci_resource_start(pdev, 1); -- cgit v1.1 From 11bbd5b6dae49fd7072ebf5eb63735827bd72f42 Mon Sep 17 00:00:00 2001 From: Michael Brunner Date: Fri, 23 Mar 2012 11:06:37 +0100 Subject: pch_uart: Add Kontron COMe-mTT10 uart clock quirk Add UART clock quirk for the Kontron COMe-mTT10 module. The board has previously been called nanoETXexpress-TT, therefore this is also checked. As suggested by Darren Hart the comparison in this patch version is placed after the FRI2 checks to ensure it will also work with possible upcoming changes to the FRI2 firmware. This patch follows the patchset submitted by Darren Hart at commit a46f5533ecfc7bbdd646d84fdab8656031a715c6. Signed-off-by: Michael Brunner Acked-by: Darren Hart Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/pch_uart.c | 7 +++++++ 1 file changed, 7 insertions(+) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index afa060f..8a18eb0 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -210,6 +210,7 @@ enum { #define CMITC_UARTCLK 192000000 /* 192.0000 MHz */ #define FRI2_64_UARTCLK 64000000 /* 64.0000 MHz */ #define FRI2_48_UARTCLK 48000000 /* 48.0000 MHz */ +#define NTC1_UARTCLK 64000000 /* 64.0000 MHz */ struct pch_uart_buffer { unsigned char *buf; @@ -388,6 +389,12 @@ static int pch_uart_get_uartclk(void) if (cmp && strstr(cmp, "Fish River Island II")) return FRI2_48_UARTCLK; + /* Kontron COMe-mTT10 (nanoETXexpress-TT) */ + cmp = dmi_get_system_info(DMI_BOARD_NAME); + if (cmp && (strstr(cmp, "COMe-mTT") || + strstr(cmp, "nanoETXexpress-TT"))) + return NTC1_UARTCLK; + return DEFAULT_UARTCLK; } -- cgit v1.1