From a485df4b4404379786c4bdd258bc528b2617449d Mon Sep 17 00:00:00 2001 From: Vinod Koul Date: Fri, 14 Oct 2011 10:47:38 +0530 Subject: spi, serial: move to dma_transfer_direction fixup usage of dma direction by introducing dma_transfer_direction, this patch moves spi, serial drivers to use new enum Signed-off-by: Vinod Koul Cc: Grant Likely Cc: Alan Cox Acked-by: Mika Westerberg --- drivers/tty/serial/amba-pl011.c | 8 ++++---- drivers/tty/serial/pch_uart.c | 4 ++-- drivers/tty/serial/sh-sci.c | 4 ++-- 3 files changed, 8 insertions(+), 8 deletions(-) (limited to 'drivers/tty') diff --git a/drivers/tty/serial/amba-pl011.c b/drivers/tty/serial/amba-pl011.c index f5f6831..460ff7d 100644 --- a/drivers/tty/serial/amba-pl011.c +++ b/drivers/tty/serial/amba-pl011.c @@ -268,7 +268,7 @@ static void pl011_dma_probe_initcall(struct uart_amba_port *uap) struct dma_slave_config tx_conf = { .dst_addr = uap->port.mapbase + UART01x_DR, .dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE, - .direction = DMA_TO_DEVICE, + .direction = DMA_MEM_TO_DEV, .dst_maxburst = uap->fifosize >> 1, }; struct dma_chan *chan; @@ -301,7 +301,7 @@ static void pl011_dma_probe_initcall(struct uart_amba_port *uap) struct dma_slave_config rx_conf = { .src_addr = uap->port.mapbase + UART01x_DR, .src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE, - .direction = DMA_FROM_DEVICE, + .direction = DMA_DEV_TO_MEM, .src_maxburst = uap->fifosize >> 1, }; @@ -480,7 +480,7 @@ static int pl011_dma_tx_refill(struct uart_amba_port *uap) return -EBUSY; } - desc = dma_dev->device_prep_slave_sg(chan, &dmatx->sg, 1, DMA_TO_DEVICE, + desc = dma_dev->device_prep_slave_sg(chan, &dmatx->sg, 1, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) { dma_unmap_sg(dma_dev->dev, &dmatx->sg, 1, DMA_TO_DEVICE); @@ -676,7 +676,7 @@ static int pl011_dma_rx_trigger_dma(struct uart_amba_port *uap) &uap->dmarx.sgbuf_b : &uap->dmarx.sgbuf_a; dma_dev = rxchan->device; desc = rxchan->device->device_prep_slave_sg(rxchan, &sgbuf->sg, 1, - DMA_FROM_DEVICE, + DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); /* * If the DMA engine is busy and cannot prepare a diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index b46218d..73201a1 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -747,7 +747,7 @@ static int dma_handle_rx(struct eg20t_port *priv) sg_dma_address(sg) = priv->rx_buf_dma; desc = priv->chan_rx->device->device_prep_slave_sg(priv->chan_rx, - sg, 1, DMA_FROM_DEVICE, + sg, 1, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) @@ -906,7 +906,7 @@ static unsigned int dma_handle_tx(struct eg20t_port *priv) } desc = priv->chan_tx->device->device_prep_slave_sg(priv->chan_tx, - priv->sg_tx_p, nent, DMA_TO_DEVICE, + priv->sg_tx_p, nent, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) { dev_err(priv->port.dev, "%s:device_prep_slave_sg Failed\n", diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c index dbd32a1..3683a69 100644 --- a/drivers/tty/serial/sh-sci.c +++ b/drivers/tty/serial/sh-sci.c @@ -1207,7 +1207,7 @@ static void sci_submit_rx(struct sci_port *s) struct dma_async_tx_descriptor *desc; desc = chan->device->device_prep_slave_sg(chan, - sg, 1, DMA_FROM_DEVICE, DMA_PREP_INTERRUPT); + sg, 1, DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT); if (desc) { s->desc_rx[i] = desc; @@ -1322,7 +1322,7 @@ static void work_fn_tx(struct work_struct *work) BUG_ON(!sg_dma_len(sg)); desc = chan->device->device_prep_slave_sg(chan, - sg, s->sg_len_tx, DMA_TO_DEVICE, + sg, s->sg_len_tx, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT | DMA_CTRL_ACK); if (!desc) { /* switch to PIO */ -- cgit v1.1