From 077175f08e365629312ce32918e0c8047151763d Mon Sep 17 00:00:00 2001 From: Darren Hart Date: Fri, 9 Mar 2012 09:51:49 -0800 Subject: pch_uart: Add Fish River Island II uart clock quirks Add support for the Fish River Island II (FRI2) UART clock following the CM-iTC quirk handling mechanism. Depending on the firmware installed on the device, the FRI2 uses a 48MHz or a 64MHz UART clock. This is detected with DMI strings. Add similar UART clock quirk handling to the pch_console_setup() function to enable kernel messages on boards with non-standard UART clocks. Per Alan's suggestion, abstract out UART clock selection into pch_uart_get_uartclk() to avoid code duplication. Signed-off-by: Darren Hart CC: Tomoya MORINAGA CC: Feng Tang CC: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/pch_uart.c | 40 +++++++++++++++++++++++++++------------- 1 file changed, 27 insertions(+), 13 deletions(-) (limited to 'drivers/tty/serial/pch_uart.c') diff --git a/drivers/tty/serial/pch_uart.c b/drivers/tty/serial/pch_uart.c index 5178213..88a1be0 100644 --- a/drivers/tty/serial/pch_uart.c +++ b/drivers/tty/serial/pch_uart.c @@ -206,7 +206,10 @@ enum { #define BOTH_EMPTY (UART_LSR_TEMT | UART_LSR_THRE) -#define DEFAULT_UARTCLK 1843200 /* 1.8432MHz */ +#define DEFAULT_UARTCLK 1843200 /* 1.8432 MHz */ +#define CMITC_UARTCLK 192000000 /* 192.0000 MHz */ +#define FRI2_64_UARTCLK 64000000 /* 64.0000 MHz */ +#define FRI2_48_UARTCLK 48000000 /* 48.0000 MHz */ struct pch_uart_buffer { unsigned char *buf; @@ -364,6 +367,26 @@ static const struct file_operations port_regs_ops = { }; #endif /* CONFIG_DEBUG_FS */ +/* Return UART clock, checking for board specific clocks. */ +static int pch_uart_get_uartclk(void) +{ + const char *cmp; + + cmp = dmi_get_system_info(DMI_BOARD_NAME); + if (cmp && strstr(cmp, "CM-iTC")) + return CMITC_UARTCLK; + + cmp = dmi_get_system_info(DMI_BIOS_VERSION); + if (cmp && strnstr(cmp, "FRI2", 4)) + return FRI2_64_UARTCLK; + + cmp = dmi_get_system_info(DMI_PRODUCT_NAME); + if (cmp && strstr(cmp, "Fish River Island II")) + return FRI2_48_UARTCLK; + + return DEFAULT_UARTCLK; +} + static void pch_uart_hal_enable_interrupt(struct eg20t_port *priv, unsigned int flag) { @@ -1556,8 +1579,7 @@ static int __init pch_console_setup(struct console *co, char *options) if (!port || (!port->iobase && !port->membase)) return -ENODEV; - /* setup uartclock */ - port->uartclk = DEFAULT_UARTCLK; + port->uartclk = pch_uart_get_uartclk(); if (options) uart_parse_options(options, &baud, &parity, &bits, &flow); @@ -1600,10 +1622,9 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev, unsigned int iobase; unsigned int mapbase; unsigned char *rxbuf; - int fifosize, uartclk; + int fifosize; int port_type; struct pch_uart_driver_data *board; - const char *board_name; char name[32]; /* for debugfs file name */ board = &drv_dat[id->driver_data]; @@ -1617,13 +1638,6 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev, if (!rxbuf) goto init_port_free_txbuf; - uartclk = DEFAULT_UARTCLK; - - /* quirk for CM-iTC board */ - board_name = dmi_get_system_info(DMI_BOARD_NAME); - if (board_name && strstr(board_name, "CM-iTC")) - uartclk = 192000000; /* 192.0MHz */ - switch (port_type) { case PORT_UNKNOWN: fifosize = 256; /* EG20T/ML7213: UART0 */ @@ -1648,7 +1662,7 @@ static struct eg20t_port *pch_uart_init_port(struct pci_dev *pdev, priv->rxbuf.size = PAGE_SIZE; priv->fifo_size = fifosize; - priv->uartclk = uartclk; + priv->uartclk = pch_uart_get_uartclk(); priv->port_type = PORT_MAX_8250 + port_type + 1; priv->port.dev = &pdev->dev; priv->port.iobase = iobase; -- cgit v1.1