From ab4382d27412e7e3e7c936e8d50d8888dfac3df8 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 13 Jan 2011 12:10:18 -0800 Subject: tty: move drivers/serial/ to drivers/tty/serial/ The serial drivers are really just tty drivers, so move them to drivers/tty/ to make things a bit neater overall. This is part of the tty/serial driver movement proceedure as proposed by Arnd Bergmann and approved by everyone involved a number of months ago. Cc: Arnd Bergmann Cc: Alan Cox Cc: Geert Uytterhoeven Cc: Rogier Wolff Cc: Michael H. Warfield Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/cpm_uart/cpm_uart.h | 147 +++++++++++++++++++++++++++++++++ 1 file changed, 147 insertions(+) create mode 100644 drivers/tty/serial/cpm_uart/cpm_uart.h (limited to 'drivers/tty/serial/cpm_uart/cpm_uart.h') diff --git a/drivers/tty/serial/cpm_uart/cpm_uart.h b/drivers/tty/serial/cpm_uart/cpm_uart.h new file mode 100644 index 0000000..b754dcf --- /dev/null +++ b/drivers/tty/serial/cpm_uart/cpm_uart.h @@ -0,0 +1,147 @@ +/* + * linux/drivers/serial/cpm_uart.h + * + * Driver for CPM (SCC/SMC) serial ports + * + * Copyright (C) 2004 Freescale Semiconductor, Inc. + * + * 2006 (c) MontaVista Software, Inc. + * Vitaly Bordug + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + * + */ +#ifndef CPM_UART_H +#define CPM_UART_H + +#include +#include + +#if defined(CONFIG_CPM2) +#include "cpm_uart_cpm2.h" +#elif defined(CONFIG_8xx) +#include "cpm_uart_cpm1.h" +#endif + +#define SERIAL_CPM_MAJOR 204 +#define SERIAL_CPM_MINOR 46 + +#define IS_SMC(pinfo) (pinfo->flags & FLAG_SMC) +#define IS_DISCARDING(pinfo) (pinfo->flags & FLAG_DISCARDING) +#define FLAG_DISCARDING 0x00000004 /* when set, don't discard */ +#define FLAG_SMC 0x00000002 +#define FLAG_CONSOLE 0x00000001 + +#define UART_SMC1 fsid_smc1_uart +#define UART_SMC2 fsid_smc2_uart +#define UART_SCC1 fsid_scc1_uart +#define UART_SCC2 fsid_scc2_uart +#define UART_SCC3 fsid_scc3_uart +#define UART_SCC4 fsid_scc4_uart + +#define UART_NR fs_uart_nr + +#define RX_NUM_FIFO 4 +#define RX_BUF_SIZE 32 +#define TX_NUM_FIFO 4 +#define TX_BUF_SIZE 32 + +#define SCC_WAIT_CLOSING 100 + +#define GPIO_CTS 0 +#define GPIO_RTS 1 +#define GPIO_DCD 2 +#define GPIO_DSR 3 +#define GPIO_DTR 4 +#define GPIO_RI 5 + +#define NUM_GPIOS (GPIO_RI+1) + +struct uart_cpm_port { + struct uart_port port; + u16 rx_nrfifos; + u16 rx_fifosize; + u16 tx_nrfifos; + u16 tx_fifosize; + smc_t __iomem *smcp; + smc_uart_t __iomem *smcup; + scc_t __iomem *sccp; + scc_uart_t __iomem *sccup; + cbd_t __iomem *rx_bd_base; + cbd_t __iomem *rx_cur; + cbd_t __iomem *tx_bd_base; + cbd_t __iomem *tx_cur; + unsigned char *tx_buf; + unsigned char *rx_buf; + u32 flags; + struct clk *clk; + u8 brg; + uint dp_addr; + void *mem_addr; + dma_addr_t dma_addr; + u32 mem_size; + /* wait on close if needed */ + int wait_closing; + /* value to combine with opcode to form cpm command */ + u32 command; + int gpios[NUM_GPIOS]; +}; + +extern int cpm_uart_nr; +extern struct uart_cpm_port cpm_uart_ports[UART_NR]; + +/* these are located in their respective files */ +void cpm_line_cr_cmd(struct uart_cpm_port *port, int cmd); +void __iomem *cpm_uart_map_pram(struct uart_cpm_port *port, + struct device_node *np); +void cpm_uart_unmap_pram(struct uart_cpm_port *port, void __iomem *pram); +int cpm_uart_init_portdesc(void); +int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con); +void cpm_uart_freebuf(struct uart_cpm_port *pinfo); + +void smc1_lineif(struct uart_cpm_port *pinfo); +void smc2_lineif(struct uart_cpm_port *pinfo); +void scc1_lineif(struct uart_cpm_port *pinfo); +void scc2_lineif(struct uart_cpm_port *pinfo); +void scc3_lineif(struct uart_cpm_port *pinfo); +void scc4_lineif(struct uart_cpm_port *pinfo); + +/* + virtual to phys transtalion +*/ +static inline unsigned long cpu2cpm_addr(void *addr, + struct uart_cpm_port *pinfo) +{ + int offset; + u32 val = (u32)addr; + u32 mem = (u32)pinfo->mem_addr; + /* sane check */ + if (likely(val >= mem && val < mem + pinfo->mem_size)) { + offset = val - mem; + return pinfo->dma_addr + offset; + } + /* something nasty happened */ + BUG(); + return 0; +} + +static inline void *cpm2cpu_addr(unsigned long addr, + struct uart_cpm_port *pinfo) +{ + int offset; + u32 val = addr; + u32 dma = (u32)pinfo->dma_addr; + /* sane check */ + if (likely(val >= dma && val < dma + pinfo->mem_size)) { + offset = val - dma; + return pinfo->mem_addr + offset; + } + /* something nasty happened */ + BUG(); + return NULL; +} + + +#endif /* CPM_UART_H */ -- cgit v1.1