From bf03f65b7967df5807ddef7b99f8a41d4c94fc70 Mon Sep 17 00:00:00 2001 From: Dan Williams Date: Tue, 10 Apr 2012 14:10:53 -0700 Subject: tegra, serial8250: add ->handle_break() uart_port op The "KT" serial port has another use case for a "received break" quirk, so before adding another special case to the 8250 core take this opportunity to push such quirks out of the core and into a uart_port op. Stephen says: "If the callback function is to no longer live in 8250.c itself, arch/arm/mach-tegra/devices.c isn't logically a good place to put it, and that file will be going away once we get rid of all the board files and move solely to device tree." ...so since 8250_pci.c houses all the quirks for pci serial devices this quirk is similarly housed in of_serial.c. Once the open firmware conversion completes the infrastructure details (include/linux/of_serial.h, and the export) can all be removed to make this self contained to of_serial.c. Cc: Nhan H Mai Cc: Colin Cross Cc: Olof Johansson [stephen: kill CONFIG_SERIAL_TEGRA in favor just using CONFIG_ARCH_TEGRA] Cc: Grant Likely Acked-by: Arnd Bergmann Acked-by: Sudhakar Mamillapalli Reported-by: Alan Cox Acked-by: Alan Cox Signed-off-by: Dan Williams Acked-by: Stephen Warren Tested-by: Stephen Warren Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250.c | 34 +++------------------------------- 1 file changed, 3 insertions(+), 31 deletions(-) (limited to 'drivers/tty/serial/8250') diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c index 5b149b4..dffd623 100644 --- a/drivers/tty/serial/8250/8250.c +++ b/drivers/tty/serial/8250/8250.c @@ -1332,27 +1332,6 @@ static void serial8250_enable_ms(struct uart_port *port) } /* - * Clear the Tegra rx fifo after a break - * - * FIXME: This needs to become a port specific callback once we have a - * framework for this - */ -static void clear_rx_fifo(struct uart_8250_port *up) -{ - unsigned int status, tmout = 10000; - do { - status = serial_in(up, UART_LSR); - if (status & (UART_LSR_FIFOE | UART_LSR_BRK_ERROR_BITS)) - status = serial_in(up, UART_RX); - else - break; - if (--tmout == 0) - break; - udelay(1); - } while (1); -} - -/* * serial8250_rx_chars: processes according to the passed in LSR * value, and returns the remaining LSR bits not handled * by this Rx routine. @@ -1386,20 +1365,10 @@ serial8250_rx_chars(struct uart_8250_port *up, unsigned char lsr) up->lsr_saved_flags = 0; if (unlikely(lsr & UART_LSR_BRK_ERROR_BITS)) { - /* - * For statistics only - */ if (lsr & UART_LSR_BI) { lsr &= ~(UART_LSR_FE | UART_LSR_PE); port->icount.brk++; /* - * If tegra port then clear the rx fifo to - * accept another break/character. - */ - if (port->type == PORT_TEGRA) - clear_rx_fifo(up); - - /* * We do the SysRQ and SAK checking * here because otherwise the break * may get masked by ignore_status_mask @@ -3037,6 +3006,7 @@ static int __devinit serial8250_probe(struct platform_device *dev) port.serial_in = p->serial_in; port.serial_out = p->serial_out; port.handle_irq = p->handle_irq; + port.handle_break = p->handle_break; port.set_termios = p->set_termios; port.pm = p->pm; port.dev = &dev->dev; @@ -3209,6 +3179,8 @@ int serial8250_register_port(struct uart_port *port) uart->port.set_termios = port->set_termios; if (port->pm) uart->port.pm = port->pm; + if (port->handle_break) + uart->port.handle_break = port->handle_break; if (serial8250_isa_config != NULL) serial8250_isa_config(0, &uart->port, -- cgit v1.1