From 0d263a264c4b8376ccf33248f6fac873310e5e05 Mon Sep 17 00:00:00 2001 From: Paul Gortmaker Date: Thu, 8 Mar 2012 19:12:10 -0500 Subject: serial: delete useless void casts in 8250.c These might have worked some magic with an ancient gcc back in 1992, but "objdump --disassemble" on gcc 4.6 on x86-64 shows identical output before and after this commit. Send the casts and their hysterical rasins to the bitbucket. Signed-off-by: Paul Gortmaker Acked-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250.c | 22 +++++++++++----------- 1 file changed, 11 insertions(+), 11 deletions(-) (limited to 'drivers/tty/serial/8250') diff --git a/drivers/tty/serial/8250/8250.c b/drivers/tty/serial/8250/8250.c index 4009e24..6a71716 100644 --- a/drivers/tty/serial/8250/8250.c +++ b/drivers/tty/serial/8250/8250.c @@ -1218,7 +1218,7 @@ static void autoconfig_irq(struct uart_8250_port *up) ICP = (up->port.iobase & 0xfe0) | 0x1f; save_ICP = inb_p(ICP); outb_p(0x80, ICP); - (void) inb_p(ICP); + inb_p(ICP); } /* forget possible initially masked and pending IRQ */ @@ -1238,10 +1238,10 @@ static void autoconfig_irq(struct uart_8250_port *up) UART_MCR_DTR | UART_MCR_RTS | UART_MCR_OUT2); } serial_out(up, UART_IER, 0x0f); /* enable all intrs */ - (void)serial_in(up, UART_LSR); - (void)serial_in(up, UART_RX); - (void)serial_in(up, UART_IIR); - (void)serial_in(up, UART_MSR); + serial_in(up, UART_LSR); + serial_in(up, UART_RX); + serial_in(up, UART_IIR); + serial_in(up, UART_MSR); serial_out(up, UART_TX, 0xFF); udelay(20); irq = probe_irq_off(irqs); @@ -1973,10 +1973,10 @@ static int serial8250_startup(struct uart_port *port) /* * Clear the interrupt registers. */ - (void) serial_in(up, UART_LSR); - (void) serial_in(up, UART_RX); - (void) serial_in(up, UART_IIR); - (void) serial_in(up, UART_MSR); + serial_in(up, UART_LSR); + serial_in(up, UART_RX); + serial_in(up, UART_IIR); + serial_in(up, UART_MSR); /* * At this point, there's no way the LSR could still be 0xff; @@ -2152,7 +2152,7 @@ dont_test_tx_en: */ icp = (up->port.iobase & 0xfe0) | 0x01f; outb_p(0x80, icp); - (void) inb_p(icp); + inb_p(icp); } return 0; @@ -2198,7 +2198,7 @@ static void serial8250_shutdown(struct uart_port *port) * Read data port to reset things, and then unlink from * the IRQ chain. */ - (void) serial_in(up, UART_RX); + serial_in(up, UART_RX); del_timer_sync(&up->timer); up->timer.function = serial8250_timeout; -- cgit v1.1