From ab4382d27412e7e3e7c936e8d50d8888dfac3df8 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 13 Jan 2011 12:10:18 -0800 Subject: tty: move drivers/serial/ to drivers/tty/serial/ The serial drivers are really just tty drivers, so move them to drivers/tty/ to make things a bit neater overall. This is part of the tty/serial driver movement proceedure as proposed by Arnd Bergmann and approved by everyone involved a number of months ago. Cc: Arnd Bergmann Cc: Alan Cox Cc: Geert Uytterhoeven Cc: Rogier Wolff Cc: Michael H. Warfield Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/68328serial.c | 1472 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 1472 insertions(+) create mode 100644 drivers/tty/serial/68328serial.c (limited to 'drivers/tty/serial/68328serial.c') diff --git a/drivers/tty/serial/68328serial.c b/drivers/tty/serial/68328serial.c new file mode 100644 index 0000000..be0ebce --- /dev/null +++ b/drivers/tty/serial/68328serial.c @@ -0,0 +1,1472 @@ +/* 68328serial.c: Serial port driver for 68328 microcontroller + * + * Copyright (C) 1995 David S. Miller + * Copyright (C) 1998 Kenneth Albanowski + * Copyright (C) 1998, 1999 D. Jeff Dionne + * Copyright (C) 1999 Vladimir Gurevich + * Copyright (C) 2002-2003 David McCullough + * Copyright (C) 2002 Greg Ungerer + * + * VZ Support/Fixes Evan Stawnyczy + * Multiple UART support Daniel Potts + * Power management support Daniel Potts + * VZ Second Serial Port enable Phil Wilshire + * 2.4/2.5 port David McCullough + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include + +/* (es) */ +/* note: perhaps we can murge these files, so that you can just + * define 1 of them, and they can sort that out for themselves + */ +#if defined(CONFIG_M68EZ328) +#include +#else +#if defined(CONFIG_M68VZ328) +#include +#else +#include +#endif /* CONFIG_M68VZ328 */ +#endif /* CONFIG_M68EZ328 */ + +#include "68328serial.h" + +/* Turn off usage of real serial interrupt code, to "support" Copilot */ +#ifdef CONFIG_XCOPILOT_BUGS +#undef USE_INTS +#else +#define USE_INTS +#endif + +static struct m68k_serial m68k_soft[NR_PORTS]; + +static unsigned int uart_irqs[NR_PORTS] = UART_IRQ_DEFNS; + +/* multiple ports are contiguous in memory */ +m68328_uart *uart_addr = (m68328_uart *)USTCNT_ADDR; + +struct tty_struct m68k_ttys; +struct m68k_serial *m68k_consinfo = 0; + +#define M68K_CLOCK (16667000) /* FIXME: 16MHz is likely wrong */ + +struct tty_driver *serial_driver; + +/* number of characters left in xmit buffer before we ask for more */ +#define WAKEUP_CHARS 256 + +/* Debugging... DEBUG_INTR is bad to use when one of the zs + * lines is your console ;( + */ +#undef SERIAL_DEBUG_INTR +#undef SERIAL_DEBUG_OPEN +#undef SERIAL_DEBUG_FLOW + +#define RS_ISR_PASS_LIMIT 256 + +static void change_speed(struct m68k_serial *info); + +/* + * Setup for console. Argument comes from the boot command line. + */ + +/* note: this is messy, but it works, again, perhaps defined somewhere else?*/ +#ifdef CONFIG_M68VZ328 +#define CONSOLE_BAUD_RATE 19200 +#define DEFAULT_CBAUD B19200 +#endif + + +#ifndef CONSOLE_BAUD_RATE +#define CONSOLE_BAUD_RATE 9600 +#define DEFAULT_CBAUD B9600 +#endif + + +static int m68328_console_initted = 0; +static int m68328_console_baud = CONSOLE_BAUD_RATE; +static int m68328_console_cbaud = DEFAULT_CBAUD; + + +static inline int serial_paranoia_check(struct m68k_serial *info, + char *name, const char *routine) +{ +#ifdef SERIAL_PARANOIA_CHECK + static const char *badmagic = + "Warning: bad magic number for serial struct %s in %s\n"; + static const char *badinfo = + "Warning: null m68k_serial for %s in %s\n"; + + if (!info) { + printk(badinfo, name, routine); + return 1; + } + if (info->magic != SERIAL_MAGIC) { + printk(badmagic, name, routine); + return 1; + } +#endif + return 0; +} + +/* + * This is used to figure out the divisor speeds and the timeouts + */ +static int baud_table[] = { + 0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800, + 9600, 19200, 38400, 57600, 115200, 0 }; + +/* Sets or clears DTR/RTS on the requested line */ +static inline void m68k_rtsdtr(struct m68k_serial *ss, int set) +{ + if (set) { + /* set the RTS/CTS line */ + } else { + /* clear it */ + } + return; +} + +/* Utility routines */ +static inline int get_baud(struct m68k_serial *ss) +{ + unsigned long result = 115200; + unsigned short int baud = uart_addr[ss->line].ubaud; + if (GET_FIELD(baud, UBAUD_PRESCALER) == 0x38) result = 38400; + result >>= GET_FIELD(baud, UBAUD_DIVIDE); + + return result; +} + +/* + * ------------------------------------------------------------ + * rs_stop() and rs_start() + * + * This routines are called before setting or resetting tty->stopped. + * They enable or disable transmitter interrupts, as necessary. + * ------------------------------------------------------------ + */ +static void rs_stop(struct tty_struct *tty) +{ + struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; + m68328_uart *uart = &uart_addr[info->line]; + unsigned long flags; + + if (serial_paranoia_check(info, tty->name, "rs_stop")) + return; + + local_irq_save(flags); + uart->ustcnt &= ~USTCNT_TXEN; + local_irq_restore(flags); +} + +static int rs_put_char(char ch) +{ + int flags, loops = 0; + + local_irq_save(flags); + + while (!(UTX & UTX_TX_AVAIL) && (loops < 1000)) { + loops++; + udelay(5); + } + + UTX_TXDATA = ch; + udelay(5); + local_irq_restore(flags); + return 1; +} + +static void rs_start(struct tty_struct *tty) +{ + struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; + m68328_uart *uart = &uart_addr[info->line]; + unsigned long flags; + + if (serial_paranoia_check(info, tty->name, "rs_start")) + return; + + local_irq_save(flags); + if (info->xmit_cnt && info->xmit_buf && !(uart->ustcnt & USTCNT_TXEN)) { +#ifdef USE_INTS + uart->ustcnt |= USTCNT_TXEN | USTCNT_TX_INTR_MASK; +#else + uart->ustcnt |= USTCNT_TXEN; +#endif + } + local_irq_restore(flags); +} + +/* Drop into either the boot monitor or kadb upon receiving a break + * from keyboard/console input. + */ +static void batten_down_hatches(void) +{ + /* Drop into the debugger */ +} + +static void status_handle(struct m68k_serial *info, unsigned short status) +{ +#if 0 + if(status & DCD) { + if((info->port.tty->termios->c_cflag & CRTSCTS) && + ((info->curregs[3] & AUTO_ENAB)==0)) { + info->curregs[3] |= AUTO_ENAB; + info->pendregs[3] |= AUTO_ENAB; + write_zsreg(info->m68k_channel, 3, info->curregs[3]); + } + } else { + if((info->curregs[3] & AUTO_ENAB)) { + info->curregs[3] &= ~AUTO_ENAB; + info->pendregs[3] &= ~AUTO_ENAB; + write_zsreg(info->m68k_channel, 3, info->curregs[3]); + } + } +#endif + /* If this is console input and this is a + * 'break asserted' status change interrupt + * see if we can drop into the debugger + */ + if((status & URX_BREAK) && info->break_abort) + batten_down_hatches(); + return; +} + +static void receive_chars(struct m68k_serial *info, unsigned short rx) +{ + struct tty_struct *tty = info->port.tty; + m68328_uart *uart = &uart_addr[info->line]; + unsigned char ch, flag; + + /* + * This do { } while() loop will get ALL chars out of Rx FIFO + */ +#ifndef CONFIG_XCOPILOT_BUGS + do { +#endif + ch = GET_FIELD(rx, URX_RXDATA); + + if(info->is_cons) { + if(URX_BREAK & rx) { /* whee, break received */ + status_handle(info, rx); + return; +#ifdef CONFIG_MAGIC_SYSRQ + } else if (ch == 0x10) { /* ^P */ + show_state(); + show_free_areas(); + show_buffers(); +/* show_net_buffers(); */ + return; + } else if (ch == 0x12) { /* ^R */ + emergency_restart(); + return; +#endif /* CONFIG_MAGIC_SYSRQ */ + } + } + + if(!tty) + goto clear_and_exit; + + flag = TTY_NORMAL; + + if(rx & URX_PARITY_ERROR) { + flag = TTY_PARITY; + status_handle(info, rx); + } else if(rx & URX_OVRUN) { + flag = TTY_OVERRUN; + status_handle(info, rx); + } else if(rx & URX_FRAME_ERROR) { + flag = TTY_FRAME; + status_handle(info, rx); + } + tty_insert_flip_char(tty, ch, flag); +#ifndef CONFIG_XCOPILOT_BUGS + } while((rx = uart->urx.w) & URX_DATA_READY); +#endif + + tty_schedule_flip(tty); + +clear_and_exit: + return; +} + +static void transmit_chars(struct m68k_serial *info) +{ + m68328_uart *uart = &uart_addr[info->line]; + + if (info->x_char) { + /* Send next char */ + uart->utx.b.txdata = info->x_char; + info->x_char = 0; + goto clear_and_return; + } + + if((info->xmit_cnt <= 0) || info->port.tty->stopped) { + /* That's peculiar... TX ints off */ + uart->ustcnt &= ~USTCNT_TX_INTR_MASK; + goto clear_and_return; + } + + /* Send char */ + uart->utx.b.txdata = info->xmit_buf[info->xmit_tail++]; + info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1); + info->xmit_cnt--; + + if (info->xmit_cnt < WAKEUP_CHARS) + schedule_work(&info->tqueue); + + if(info->xmit_cnt <= 0) { + /* All done for now... TX ints off */ + uart->ustcnt &= ~USTCNT_TX_INTR_MASK; + goto clear_and_return; + } + +clear_and_return: + /* Clear interrupt (should be auto)*/ + return; +} + +/* + * This is the serial driver's generic interrupt routine + */ +irqreturn_t rs_interrupt(int irq, void *dev_id) +{ + struct m68k_serial *info = dev_id; + m68328_uart *uart; + unsigned short rx; + unsigned short tx; + + uart = &uart_addr[info->line]; + rx = uart->urx.w; + +#ifdef USE_INTS + tx = uart->utx.w; + + if (rx & URX_DATA_READY) receive_chars(info, rx); + if (tx & UTX_TX_AVAIL) transmit_chars(info); +#else + receive_chars(info, rx); +#endif + return IRQ_HANDLED; +} + +static void do_softint(struct work_struct *work) +{ + struct m68k_serial *info = container_of(work, struct m68k_serial, tqueue); + struct tty_struct *tty; + + tty = info->port.tty; + if (!tty) + return; +#if 0 + if (clear_bit(RS_EVENT_WRITE_WAKEUP, &info->event)) { + tty_wakeup(tty); + } +#endif +} + +/* + * This routine is called from the scheduler tqueue when the interrupt + * routine has signalled that a hangup has occurred. The path of + * hangup processing is: + * + * serial interrupt routine -> (scheduler tqueue) -> + * do_serial_hangup() -> tty->hangup() -> rs_hangup() + * + */ +static void do_serial_hangup(struct work_struct *work) +{ + struct m68k_serial *info = container_of(work, struct m68k_serial, tqueue_hangup); + struct tty_struct *tty; + + tty = info->port.tty; + if (!tty) + return; + + tty_hangup(tty); +} + + +static int startup(struct m68k_serial * info) +{ + m68328_uart *uart = &uart_addr[info->line]; + unsigned long flags; + + if (info->flags & S_INITIALIZED) + return 0; + + if (!info->xmit_buf) { + info->xmit_buf = (unsigned char *) __get_free_page(GFP_KERNEL); + if (!info->xmit_buf) + return -ENOMEM; + } + + local_irq_save(flags); + + /* + * Clear the FIFO buffers and disable them + * (they will be reenabled in change_speed()) + */ + + uart->ustcnt = USTCNT_UEN; + info->xmit_fifo_size = 1; + uart->ustcnt = USTCNT_UEN | USTCNT_RXEN | USTCNT_TXEN; + (void)uart->urx.w; + + /* + * Finally, enable sequencing and interrupts + */ +#ifdef USE_INTS + uart->ustcnt = USTCNT_UEN | USTCNT_RXEN | + USTCNT_RX_INTR_MASK | USTCNT_TX_INTR_MASK; +#else + uart->ustcnt = USTCNT_UEN | USTCNT_RXEN | USTCNT_RX_INTR_MASK; +#endif + + if (info->port.tty) + clear_bit(TTY_IO_ERROR, &info->port.tty->flags); + info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; + + /* + * and set the speed of the serial port + */ + + change_speed(info); + + info->flags |= S_INITIALIZED; + local_irq_restore(flags); + return 0; +} + +/* + * This routine will shutdown a serial port; interrupts are disabled, and + * DTR is dropped if the hangup on close termio flag is on. + */ +static void shutdown(struct m68k_serial * info) +{ + m68328_uart *uart = &uart_addr[info->line]; + unsigned long flags; + + uart->ustcnt = 0; /* All off! */ + if (!(info->flags & S_INITIALIZED)) + return; + + local_irq_save(flags); + + if (info->xmit_buf) { + free_page((unsigned long) info->xmit_buf); + info->xmit_buf = 0; + } + + if (info->port.tty) + set_bit(TTY_IO_ERROR, &info->port.tty->flags); + + info->flags &= ~S_INITIALIZED; + local_irq_restore(flags); +} + +struct { + int divisor, prescale; +} +#ifndef CONFIG_M68VZ328 + hw_baud_table[18] = { + {0,0}, /* 0 */ + {0,0}, /* 50 */ + {0,0}, /* 75 */ + {0,0}, /* 110 */ + {0,0}, /* 134 */ + {0,0}, /* 150 */ + {0,0}, /* 200 */ + {7,0x26}, /* 300 */ + {6,0x26}, /* 600 */ + {5,0x26}, /* 1200 */ + {0,0}, /* 1800 */ + {4,0x26}, /* 2400 */ + {3,0x26}, /* 4800 */ + {2,0x26}, /* 9600 */ + {1,0x26}, /* 19200 */ + {0,0x26}, /* 38400 */ + {1,0x38}, /* 57600 */ + {0,0x38}, /* 115200 */ +}; +#else + hw_baud_table[18] = { + {0,0}, /* 0 */ + {0,0}, /* 50 */ + {0,0}, /* 75 */ + {0,0}, /* 110 */ + {0,0}, /* 134 */ + {0,0}, /* 150 */ + {0,0}, /* 200 */ + {0,0}, /* 300 */ + {7,0x26}, /* 600 */ + {6,0x26}, /* 1200 */ + {0,0}, /* 1800 */ + {5,0x26}, /* 2400 */ + {4,0x26}, /* 4800 */ + {3,0x26}, /* 9600 */ + {2,0x26}, /* 19200 */ + {1,0x26}, /* 38400 */ + {0,0x26}, /* 57600 */ + {1,0x38}, /* 115200 */ +}; +#endif +/* rate = 1036800 / ((65 - prescale) * (1<line]; + unsigned short port; + unsigned short ustcnt; + unsigned cflag; + int i; + + if (!info->port.tty || !info->port.tty->termios) + return; + cflag = info->port.tty->termios->c_cflag; + if (!(port = info->port)) + return; + + ustcnt = uart->ustcnt; + uart->ustcnt = ustcnt & ~USTCNT_TXEN; + + i = cflag & CBAUD; + if (i & CBAUDEX) { + i = (i & ~CBAUDEX) + B38400; + } + + info->baud = baud_table[i]; + uart->ubaud = PUT_FIELD(UBAUD_DIVIDE, hw_baud_table[i].divisor) | + PUT_FIELD(UBAUD_PRESCALER, hw_baud_table[i].prescale); + + ustcnt &= ~(USTCNT_PARITYEN | USTCNT_ODD_EVEN | USTCNT_STOP | USTCNT_8_7); + + if ((cflag & CSIZE) == CS8) + ustcnt |= USTCNT_8_7; + + if (cflag & CSTOPB) + ustcnt |= USTCNT_STOP; + + if (cflag & PARENB) + ustcnt |= USTCNT_PARITYEN; + if (cflag & PARODD) + ustcnt |= USTCNT_ODD_EVEN; + +#ifdef CONFIG_SERIAL_68328_RTS_CTS + if (cflag & CRTSCTS) { + uart->utx.w &= ~ UTX_NOCTS; + } else { + uart->utx.w |= UTX_NOCTS; + } +#endif + + ustcnt |= USTCNT_TXEN; + + uart->ustcnt = ustcnt; + return; +} + +/* + * Fair output driver allows a process to speak. + */ +static void rs_fair_output(void) +{ + int left; /* Output no more than that */ + unsigned long flags; + struct m68k_serial *info = &m68k_soft[0]; + char c; + + if (info == 0) return; + if (info->xmit_buf == 0) return; + + local_irq_save(flags); + left = info->xmit_cnt; + while (left != 0) { + c = info->xmit_buf[info->xmit_tail]; + info->xmit_tail = (info->xmit_tail+1) & (SERIAL_XMIT_SIZE-1); + info->xmit_cnt--; + local_irq_restore(flags); + + rs_put_char(c); + + local_irq_save(flags); + left = min(info->xmit_cnt, left-1); + } + + /* Last character is being transmitted now (hopefully). */ + udelay(5); + + local_irq_restore(flags); + return; +} + +/* + * m68k_console_print is registered for printk. + */ +void console_print_68328(const char *p) +{ + char c; + + while((c=*(p++)) != 0) { + if(c == '\n') + rs_put_char('\r'); + rs_put_char(c); + } + + /* Comment this if you want to have a strict interrupt-driven output */ + rs_fair_output(); + + return; +} + +static void rs_set_ldisc(struct tty_struct *tty) +{ + struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; + + if (serial_paranoia_check(info, tty->name, "rs_set_ldisc")) + return; + + info->is_cons = (tty->termios->c_line == N_TTY); + + printk("ttyS%d console mode %s\n", info->line, info->is_cons ? "on" : "off"); +} + +static void rs_flush_chars(struct tty_struct *tty) +{ + struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; + m68328_uart *uart = &uart_addr[info->line]; + unsigned long flags; + + if (serial_paranoia_check(info, tty->name, "rs_flush_chars")) + return; +#ifndef USE_INTS + for(;;) { +#endif + + /* Enable transmitter */ + local_irq_save(flags); + + if (info->xmit_cnt <= 0 || tty->stopped || tty->hw_stopped || + !info->xmit_buf) { + local_irq_restore(flags); + return; + } + +#ifdef USE_INTS + uart->ustcnt |= USTCNT_TXEN | USTCNT_TX_INTR_MASK; +#else + uart->ustcnt |= USTCNT_TXEN; +#endif + +#ifdef USE_INTS + if (uart->utx.w & UTX_TX_AVAIL) { +#else + if (1) { +#endif + /* Send char */ + uart->utx.b.txdata = info->xmit_buf[info->xmit_tail++]; + info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1); + info->xmit_cnt--; + } + +#ifndef USE_INTS + while (!(uart->utx.w & UTX_TX_AVAIL)) udelay(5); + } +#endif + local_irq_restore(flags); +} + +extern void console_printn(const char * b, int count); + +static int rs_write(struct tty_struct * tty, + const unsigned char *buf, int count) +{ + int c, total = 0; + struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; + m68328_uart *uart = &uart_addr[info->line]; + unsigned long flags; + + if (serial_paranoia_check(info, tty->name, "rs_write")) + return 0; + + if (!tty || !info->xmit_buf) + return 0; + + local_save_flags(flags); + while (1) { + local_irq_disable(); + c = min_t(int, count, min(SERIAL_XMIT_SIZE - info->xmit_cnt - 1, + SERIAL_XMIT_SIZE - info->xmit_head)); + local_irq_restore(flags); + + if (c <= 0) + break; + + memcpy(info->xmit_buf + info->xmit_head, buf, c); + + local_irq_disable(); + info->xmit_head = (info->xmit_head + c) & (SERIAL_XMIT_SIZE-1); + info->xmit_cnt += c; + local_irq_restore(flags); + buf += c; + count -= c; + total += c; + } + + if (info->xmit_cnt && !tty->stopped && !tty->hw_stopped) { + /* Enable transmitter */ + local_irq_disable(); +#ifndef USE_INTS + while(info->xmit_cnt) { +#endif + + uart->ustcnt |= USTCNT_TXEN; +#ifdef USE_INTS + uart->ustcnt |= USTCNT_TX_INTR_MASK; +#else + while (!(uart->utx.w & UTX_TX_AVAIL)) udelay(5); +#endif + if (uart->utx.w & UTX_TX_AVAIL) { + uart->utx.b.txdata = info->xmit_buf[info->xmit_tail++]; + info->xmit_tail = info->xmit_tail & (SERIAL_XMIT_SIZE-1); + info->xmit_cnt--; + } + +#ifndef USE_INTS + } +#endif + local_irq_restore(flags); + } + + return total; +} + +static int rs_write_room(struct tty_struct *tty) +{ + struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; + int ret; + + if (serial_paranoia_check(info, tty->name, "rs_write_room")) + return 0; + ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1; + if (ret < 0) + ret = 0; + return ret; +} + +static int rs_chars_in_buffer(struct tty_struct *tty) +{ + struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; + + if (serial_paranoia_check(info, tty->name, "rs_chars_in_buffer")) + return 0; + return info->xmit_cnt; +} + +static void rs_flush_buffer(struct tty_struct *tty) +{ + struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; + unsigned long flags; + + if (serial_paranoia_check(info, tty->name, "rs_flush_buffer")) + return; + local_irq_save(flags); + info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; + local_irq_restore(flags); + tty_wakeup(tty); +} + +/* + * ------------------------------------------------------------ + * rs_throttle() + * + * This routine is called by the upper-layer tty layer to signal that + * incoming characters should be throttled. + * ------------------------------------------------------------ + */ +static void rs_throttle(struct tty_struct * tty) +{ + struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; + + if (serial_paranoia_check(info, tty->name, "rs_throttle")) + return; + + if (I_IXOFF(tty)) + info->x_char = STOP_CHAR(tty); + + /* Turn off RTS line (do this atomic) */ +} + +static void rs_unthrottle(struct tty_struct * tty) +{ + struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; + + if (serial_paranoia_check(info, tty->name, "rs_unthrottle")) + return; + + if (I_IXOFF(tty)) { + if (info->x_char) + info->x_char = 0; + else + info->x_char = START_CHAR(tty); + } + + /* Assert RTS line (do this atomic) */ +} + +/* + * ------------------------------------------------------------ + * rs_ioctl() and friends + * ------------------------------------------------------------ + */ + +static int get_serial_info(struct m68k_serial * info, + struct serial_struct * retinfo) +{ + struct serial_struct tmp; + + if (!retinfo) + return -EFAULT; + memset(&tmp, 0, sizeof(tmp)); + tmp.type = info->type; + tmp.line = info->line; + tmp.port = info->port; + tmp.irq = info->irq; + tmp.flags = info->flags; + tmp.baud_base = info->baud_base; + tmp.close_delay = info->close_delay; + tmp.closing_wait = info->closing_wait; + tmp.custom_divisor = info->custom_divisor; + if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) + return -EFAULT; + + return 0; +} + +static int set_serial_info(struct m68k_serial * info, + struct serial_struct * new_info) +{ + struct serial_struct new_serial; + struct m68k_serial old_info; + int retval = 0; + + if (!new_info) + return -EFAULT; + if (copy_from_user(&new_serial, new_info, sizeof(new_serial))) + return -EFAULT; + old_info = *info; + + if (!capable(CAP_SYS_ADMIN)) { + if ((new_serial.baud_base != info->baud_base) || + (new_serial.type != info->type) || + (new_serial.close_delay != info->close_delay) || + ((new_serial.flags & ~S_USR_MASK) != + (info->flags & ~S_USR_MASK))) + return -EPERM; + info->flags = ((info->flags & ~S_USR_MASK) | + (new_serial.flags & S_USR_MASK)); + info->custom_divisor = new_serial.custom_divisor; + goto check_and_exit; + } + + if (info->count > 1) + return -EBUSY; + + /* + * OK, past this point, all the error checking has been done. + * At this point, we start making changes..... + */ + + info->baud_base = new_serial.baud_base; + info->flags = ((info->flags & ~S_FLAGS) | + (new_serial.flags & S_FLAGS)); + info->type = new_serial.type; + info->close_delay = new_serial.close_delay; + info->closing_wait = new_serial.closing_wait; + +check_and_exit: + retval = startup(info); + return retval; +} + +/* + * get_lsr_info - get line status register info + * + * Purpose: Let user call ioctl() to get info when the UART physically + * is emptied. On bus types like RS485, the transmitter must + * release the bus after transmitting. This must be done when + * the transmit shift register is empty, not be done when the + * transmit holding register is empty. This functionality + * allows an RS485 driver to be written in user space. + */ +static int get_lsr_info(struct m68k_serial * info, unsigned int *value) +{ +#ifdef CONFIG_SERIAL_68328_RTS_CTS + m68328_uart *uart = &uart_addr[info->line]; +#endif + unsigned char status; + unsigned long flags; + + local_irq_save(flags); +#ifdef CONFIG_SERIAL_68328_RTS_CTS + status = (uart->utx.w & UTX_CTS_STAT) ? 1 : 0; +#else + status = 0; +#endif + local_irq_restore(flags); + return put_user(status, value); +} + +/* + * This routine sends a break character out the serial port. + */ +static void send_break(struct m68k_serial * info, unsigned int duration) +{ + m68328_uart *uart = &uart_addr[info->line]; + unsigned long flags; + if (!info->port) + return; + local_irq_save(flags); +#ifdef USE_INTS + uart->utx.w |= UTX_SEND_BREAK; + msleep_interruptible(duration); + uart->utx.w &= ~UTX_SEND_BREAK; +#endif + local_irq_restore(flags); +} + +static int rs_ioctl(struct tty_struct *tty, struct file * file, + unsigned int cmd, unsigned long arg) +{ + int error; + struct m68k_serial * info = (struct m68k_serial *)tty->driver_data; + int retval; + + if (serial_paranoia_check(info, tty->name, "rs_ioctl")) + return -ENODEV; + + if ((cmd != TIOCGSERIAL) && (cmd != TIOCSSERIAL) && + (cmd != TIOCSERCONFIG) && (cmd != TIOCSERGWILD) && + (cmd != TIOCSERSWILD) && (cmd != TIOCSERGSTRUCT)) { + if (tty->flags & (1 << TTY_IO_ERROR)) + return -EIO; + } + + switch (cmd) { + case TCSBRK: /* SVID version: non-zero arg --> no break */ + retval = tty_check_change(tty); + if (retval) + return retval; + tty_wait_until_sent(tty, 0); + if (!arg) + send_break(info, 250); /* 1/4 second */ + return 0; + case TCSBRKP: /* support for POSIX tcsendbreak() */ + retval = tty_check_change(tty); + if (retval) + return retval; + tty_wait_until_sent(tty, 0); + send_break(info, arg ? arg*(100) : 250); + return 0; + case TIOCGSERIAL: + return get_serial_info(info, + (struct serial_struct *) arg); + case TIOCSSERIAL: + return set_serial_info(info, + (struct serial_struct *) arg); + case TIOCSERGETLSR: /* Get line status register */ + return get_lsr_info(info, (unsigned int *) arg); + case TIOCSERGSTRUCT: + if (copy_to_user((struct m68k_serial *) arg, + info, sizeof(struct m68k_serial))) + return -EFAULT; + return 0; + default: + return -ENOIOCTLCMD; + } + return 0; +} + +static void rs_set_termios(struct tty_struct *tty, struct ktermios *old_termios) +{ + struct m68k_serial *info = (struct m68k_serial *)tty->driver_data; + + change_speed(info); + + if ((old_termios->c_cflag & CRTSCTS) && + !(tty->termios->c_cflag & CRTSCTS)) { + tty->hw_stopped = 0; + rs_start(tty); + } + +} + +/* + * ------------------------------------------------------------ + * rs_close() + * + * This routine is called when the serial port gets closed. First, we + * wait for the last remaining data to be sent. Then, we unlink its + * S structure from the interrupt chain if necessary, and we free + * that IRQ if nothing is left in the chain. + * ------------------------------------------------------------ + */ +static void rs_close(struct tty_struct *tty, struct file * filp) +{ + struct m68k_serial * info = (struct m68k_serial *)tty->driver_data; + m68328_uart *uart = &uart_addr[info->line]; + unsigned long flags; + + if (!info || serial_paranoia_check(info, tty->name, "rs_close")) + return; + + local_irq_save(flags); + + if (tty_hung_up_p(filp)) { + local_irq_restore(flags); + return; + } + + if ((tty->count == 1) && (info->count != 1)) { + /* + * Uh, oh. tty->count is 1, which means that the tty + * structure will be freed. Info->count should always + * be one in these conditions. If it's greater than + * one, we've got real problems, since it means the + * serial port won't be shutdown. + */ + printk("rs_close: bad serial port count; tty->count is 1, " + "info->count is %d\n", info->count); + info->count = 1; + } + if (--info->count < 0) { + printk("rs_close: bad serial port count for ttyS%d: %d\n", + info->line, info->count); + info->count = 0; + } + if (info->count) { + local_irq_restore(flags); + return; + } + info->flags |= S_CLOSING; + /* + * Now we wait for the transmit buffer to clear; and we notify + * the line discipline to only process XON/XOFF characters. + */ + tty->closing = 1; + if (info->closing_wait != S_CLOSING_WAIT_NONE) + tty_wait_until_sent(tty, info->closing_wait); + /* + * At this point we stop accepting input. To do this, we + * disable the receive line status interrupts, and tell the + * interrupt driver to stop checking the data ready bit in the + * line status register. + */ + + uart->ustcnt &= ~USTCNT_RXEN; + uart->ustcnt &= ~(USTCNT_RXEN | USTCNT_RX_INTR_MASK); + + shutdown(info); + rs_flush_buffer(tty); + + tty_ldisc_flush(tty); + tty->closing = 0; + info->event = 0; + info->port.tty = NULL; +#warning "This is not and has never been valid so fix it" +#if 0 + if (tty->ldisc.num != ldiscs[N_TTY].num) { + if (tty->ldisc.close) + (tty->ldisc.close)(tty); + tty->ldisc = ldiscs[N_TTY]; + tty->termios->c_line = N_TTY; + if (tty->ldisc.open) + (tty->ldisc.open)(tty); + } +#endif + if (info->blocked_open) { + if (info->close_delay) { + msleep_interruptible(jiffies_to_msecs(info->close_delay)); + } + wake_up_interruptible(&info->open_wait); + } + info->flags &= ~(S_NORMAL_ACTIVE|S_CLOSING); + wake_up_interruptible(&info->close_wait); + local_irq_restore(flags); +} + +/* + * rs_hangup() --- called by tty_hangup() when a hangup is signaled. + */ +void rs_hangup(struct tty_struct *tty) +{ + struct m68k_serial * info = (struct m68k_serial *)tty->driver_data; + + if (serial_paranoia_check(info, tty->name, "rs_hangup")) + return; + + rs_flush_buffer(tty); + shutdown(info); + info->event = 0; + info->count = 0; + info->flags &= ~S_NORMAL_ACTIVE; + info->port.tty = NULL; + wake_up_interruptible(&info->open_wait); +} + +/* + * ------------------------------------------------------------ + * rs_open() and friends + * ------------------------------------------------------------ + */ +static int block_til_ready(struct tty_struct *tty, struct file * filp, + struct m68k_serial *info) +{ + DECLARE_WAITQUEUE(wait, current); + int retval; + int do_clocal = 0; + + /* + * If the device is in the middle of being closed, then block + * until it's done, and then try again. + */ + if (info->flags & S_CLOSING) { + interruptible_sleep_on(&info->close_wait); +#ifdef SERIAL_DO_RESTART + if (info->flags & S_HUP_NOTIFY) + return -EAGAIN; + else + return -ERESTARTSYS; +#else + return -EAGAIN; +#endif + } + + /* + * If non-blocking mode is set, or the port is not enabled, + * then make the check up front and then exit. + */ + if ((filp->f_flags & O_NONBLOCK) || + (tty->flags & (1 << TTY_IO_ERROR))) { + info->flags |= S_NORMAL_ACTIVE; + return 0; + } + + if (tty->termios->c_cflag & CLOCAL) + do_clocal = 1; + + /* + * Block waiting for the carrier detect and the line to become + * free (i.e., not in use by the callout). While we are in + * this loop, info->count is dropped by one, so that + * rs_close() knows when to free things. We restore it upon + * exit, either normal or abnormal. + */ + retval = 0; + add_wait_queue(&info->open_wait, &wait); + + info->count--; + info->blocked_open++; + while (1) { + local_irq_disable(); + m68k_rtsdtr(info, 1); + local_irq_enable(); + current->state = TASK_INTERRUPTIBLE; + if (tty_hung_up_p(filp) || + !(info->flags & S_INITIALIZED)) { +#ifdef SERIAL_DO_RESTART + if (info->flags & S_HUP_NOTIFY) + retval = -EAGAIN; + else + retval = -ERESTARTSYS; +#else + retval = -EAGAIN; +#endif + break; + } + if (!(info->flags & S_CLOSING) && do_clocal) + break; + if (signal_pending(current)) { + retval = -ERESTARTSYS; + break; + } + tty_unlock(); + schedule(); + tty_lock(); + } + current->state = TASK_RUNNING; + remove_wait_queue(&info->open_wait, &wait); + if (!tty_hung_up_p(filp)) + info->count++; + info->blocked_open--; + + if (retval) + return retval; + info->flags |= S_NORMAL_ACTIVE; + return 0; +} + +/* + * This routine is called whenever a serial port is opened. It + * enables interrupts for a serial port, linking in its S structure into + * the IRQ chain. It also performs the serial-specific + * initialization for the tty structure. + */ +int rs_open(struct tty_struct *tty, struct file * filp) +{ + struct m68k_serial *info; + int retval, line; + + line = tty->index; + + if (line >= NR_PORTS || line < 0) /* we have exactly one */ + return -ENODEV; + + info = &m68k_soft[line]; + + if (serial_paranoia_check(info, tty->name, "rs_open")) + return -ENODEV; + + info->count++; + tty->driver_data = info; + info->port.tty = tty; + + /* + * Start up serial port + */ + retval = startup(info); + if (retval) + return retval; + + return block_til_ready(tty, filp, info); +} + +/* Finally, routines used to initialize the serial driver. */ + +static void show_serial_version(void) +{ + printk("MC68328 serial driver version 1.00\n"); +} + +static const struct tty_operations rs_ops = { + .open = rs_open, + .close = rs_close, + .write = rs_write, + .flush_chars = rs_flush_chars, + .write_room = rs_write_room, + .chars_in_buffer = rs_chars_in_buffer, + .flush_buffer = rs_flush_buffer, + .ioctl = rs_ioctl, + .throttle = rs_throttle, + .unthrottle = rs_unthrottle, + .set_termios = rs_set_termios, + .stop = rs_stop, + .start = rs_start, + .hangup = rs_hangup, + .set_ldisc = rs_set_ldisc, +}; + +/* rs_init inits the driver */ +static int __init +rs68328_init(void) +{ + int flags, i; + struct m68k_serial *info; + + serial_driver = alloc_tty_driver(NR_PORTS); + if (!serial_driver) + return -ENOMEM; + + show_serial_version(); + + /* Initialize the tty_driver structure */ + /* SPARC: Not all of this is exactly right for us. */ + + serial_driver->name = "ttyS"; + serial_driver->major = TTY_MAJOR; + serial_driver->minor_start = 64; + serial_driver->type = TTY_DRIVER_TYPE_SERIAL; + serial_driver->subtype = SERIAL_TYPE_NORMAL; + serial_driver->init_termios = tty_std_termios; + serial_driver->init_termios.c_cflag = + m68328_console_cbaud | CS8 | CREAD | HUPCL | CLOCAL; + serial_driver->flags = TTY_DRIVER_REAL_RAW; + tty_set_operations(serial_driver, &rs_ops); + + if (tty_register_driver(serial_driver)) { + put_tty_driver(serial_driver); + printk(KERN_ERR "Couldn't register serial driver\n"); + return -ENOMEM; + } + + local_irq_save(flags); + + for(i=0;imagic = SERIAL_MAGIC; + info->port = (int) &uart_addr[i]; + info->port.tty = NULL; + info->irq = uart_irqs[i]; + info->custom_divisor = 16; + info->close_delay = 50; + info->closing_wait = 3000; + info->x_char = 0; + info->event = 0; + info->count = 0; + info->blocked_open = 0; + INIT_WORK(&info->tqueue, do_softint); + INIT_WORK(&info->tqueue_hangup, do_serial_hangup); + init_waitqueue_head(&info->open_wait); + init_waitqueue_head(&info->close_wait); + info->line = i; + info->is_cons = 1; /* Means shortcuts work */ + + printk("%s%d at 0x%08x (irq = %d)", serial_driver->name, info->line, + info->port, info->irq); + printk(" is a builtin MC68328 UART\n"); + +#ifdef CONFIG_M68VZ328 + if (i > 0 ) + PJSEL &= 0xCF; /* PSW enable second port output */ +#endif + + if (request_irq(uart_irqs[i], + rs_interrupt, + IRQF_DISABLED, + "M68328_UART", info)) + panic("Unable to attach 68328 serial interrupt\n"); + } + local_irq_restore(flags); + return 0; +} + +module_init(rs68328_init); + + + +static void m68328_set_baud(void) +{ + unsigned short ustcnt; + int i; + + ustcnt = USTCNT; + USTCNT = ustcnt & ~USTCNT_TXEN; + +again: + for (i = 0; i < ARRAY_SIZE(baud_table); i++) + if (baud_table[i] == m68328_console_baud) + break; + if (i >= ARRAY_SIZE(baud_table)) { + m68328_console_baud = 9600; + goto again; + } + + UBAUD = PUT_FIELD(UBAUD_DIVIDE, hw_baud_table[i].divisor) | + PUT_FIELD(UBAUD_PRESCALER, hw_baud_table[i].prescale); + ustcnt &= ~(USTCNT_PARITYEN | USTCNT_ODD_EVEN | USTCNT_STOP | USTCNT_8_7); + ustcnt |= USTCNT_8_7; + ustcnt |= USTCNT_TXEN; + USTCNT = ustcnt; + m68328_console_initted = 1; + return; +} + + +int m68328_console_setup(struct console *cp, char *arg) +{ + int i, n = CONSOLE_BAUD_RATE; + + if (!cp) + return(-1); + + if (arg) + n = simple_strtoul(arg,NULL,0); + + for (i = 0; i < ARRAY_SIZE(baud_table); i++) + if (baud_table[i] == n) + break; + if (i < ARRAY_SIZE(baud_table)) { + m68328_console_baud = n; + m68328_console_cbaud = 0; + if (i > 15) { + m68328_console_cbaud |= CBAUDEX; + i -= 15; + } + m68328_console_cbaud |= i; + } + + m68328_set_baud(); /* make sure baud rate changes */ + return(0); +} + + +static struct tty_driver *m68328_console_device(struct console *c, int *index) +{ + *index = c->index; + return serial_driver; +} + + +void m68328_console_write (struct console *co, const char *str, + unsigned int count) +{ + if (!m68328_console_initted) + m68328_set_baud(); + while (count--) { + if (*str == '\n') + rs_put_char('\r'); + rs_put_char( *str++ ); + } +} + + +static struct console m68328_driver = { + .name = "ttyS", + .write = m68328_console_write, + .device = m68328_console_device, + .setup = m68328_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, +}; + + +static int __init m68328_console_init(void) +{ + register_console(&m68328_driver); + return 0; +} + +console_initcall(m68328_console_init); -- cgit v1.1