From 13369194256a95c5fd63472b0f5abcfd58a284c1 Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Wed, 2 Mar 2016 13:00:55 +0300 Subject: thermal: ti-soc-thermal: clean up the error handling a bit We don't need to initialize "ret". We can move the IS_ERR() checks into the if condition instead of doing an assignment first. Also there is a check for "ret" when we know it is zero so we can remove that. Signed-off-by: Dan Carpenter Signed-off-by: Eduardo Valentin --- drivers/thermal/ti-soc-thermal/ti-bandgap.c | 10 ++++------ 1 file changed, 4 insertions(+), 6 deletions(-) (limited to 'drivers/thermal/ti-soc-thermal') diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.c b/drivers/thermal/ti-soc-thermal/ti-bandgap.c index 1e34a1e..06ea976 100644 --- a/drivers/thermal/ti-soc-thermal/ti-bandgap.c +++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.c @@ -1265,7 +1265,7 @@ static int ti_bandgap_probe(struct platform_device *pdev) { struct ti_bandgap *bgp; - int clk_rate, ret = 0, i; + int clk_rate, ret, i; bgp = ti_bandgap_build(pdev); if (IS_ERR(bgp)) { @@ -1288,16 +1288,14 @@ int ti_bandgap_probe(struct platform_device *pdev) } bgp->fclock = clk_get(NULL, bgp->conf->fclock_name); - ret = IS_ERR(bgp->fclock); - if (ret) { + if (IS_ERR(bgp->fclock)) { dev_err(&pdev->dev, "failed to request fclock reference\n"); ret = PTR_ERR(bgp->fclock); goto free_irqs; } bgp->div_clk = clk_get(NULL, bgp->conf->div_ck_name); - ret = IS_ERR(bgp->div_clk); - if (ret) { + if (IS_ERR(bgp->div_clk)) { dev_err(&pdev->dev, "failed to request div_ts_ck clock ref\n"); ret = PTR_ERR(bgp->div_clk); goto free_irqs; @@ -1314,7 +1312,7 @@ int ti_bandgap_probe(struct platform_device *pdev) * may not be accurate */ val = ti_bandgap_readl(bgp, tsr->bgap_efuse); - if (ret || !val) + if (!val) dev_info(&pdev->dev, "Non-trimmed BGAP, Temp not accurate\n"); } -- cgit v1.1