From 12e95a6366cbf30341e0e4330c04c6b6d8895f16 Mon Sep 17 00:00:00 2001 From: Bartlomiej Zolnierkiewicz Date: Sun, 26 Apr 2009 16:06:16 +0200 Subject: Staging: rt3070: remove dead code Signed-off-by: Bartlomiej Zolnierkiewicz Signed-off-by: Greg Kroah-Hartman --- drivers/staging/rt3070/rtmp.h | 60 ------------------------------------------- 1 file changed, 60 deletions(-) (limited to 'drivers/staging/rt3070/rtmp.h') diff --git a/drivers/staging/rt3070/rtmp.h b/drivers/staging/rt3070/rtmp.h index 808d0c8..a21db45 100644 --- a/drivers/staging/rt3070/rtmp.h +++ b/drivers/staging/rt3070/rtmp.h @@ -142,7 +142,6 @@ typedef struct _RX_CONTEXT PURB pUrb; //These 2 Boolean shouldn't both be 1 at the same time. ULONG BulkInOffset; // number of packets waiting for reordering . -// BOOLEAN ReorderInUse; // At least one packet in this buffer are in reordering buffer and wait for receive indication BOOLEAN bRxHandling; // Notify this packet is being process now. BOOLEAN InUse; // USB Hardware Occupied. Wait for USB HW to put packet. BOOLEAN Readable; // Receive Complete back. OK for driver to indicate receiving packet. @@ -458,20 +457,6 @@ typedef struct _QUEUE_HEADER { } // -// MACRO for 32-bit PCI register read / write -// -// Usage : RTMP_IO_READ32( -// PRTMP_ADAPTER pAd, -// ULONG Register_Offset, -// PULONG pValue) -// -// RTMP_IO_WRITE32( -// PRTMP_ADAPTER pAd, -// ULONG Register_Offset, -// ULONG Value) -// - -// // BBP & RF are using indirect access. Before write any value into it. // We have to make sure there is no outstanding command pending via checking busy bit. // @@ -607,8 +592,6 @@ typedef struct _QUEUE_HEADER { // // Common fragment list structure - Identical to the scatter gather frag list structure // -//#define RTMP_SCATTER_GATHER_ELEMENT SCATTER_GATHER_ELEMENT -//#define PRTMP_SCATTER_GATHER_ELEMENT PSCATTER_GATHER_ELEMENT #define NIC_MAX_PHYS_BUF_COUNT 8 typedef struct _RTMP_SCATTER_GATHER_ELEMENT { @@ -1303,7 +1286,6 @@ typedef struct _MLME_STRUCT { // structure for radar detection and channel switch typedef struct _RADAR_DETECT_STRUCT { - //BOOLEAN IEEE80211H; // 0: disable, 1: enable IEEE802.11h UCHAR CSCount; //Channel switch counter UCHAR CSPeriod; //Channel switch period (beacon count) UCHAR RDCount; //Radar detection counter @@ -1355,21 +1337,14 @@ typedef struct _BA_REC_ENTRY { UCHAR Wcid; UCHAR TID; UCHAR BAWinSize; // 7.3.1.14. each buffer is capable of holding a max AMSDU or MSDU. - //UCHAR NumOfRxPkt; - //UCHAR Curindidx; // the head in the RX reordering buffer USHORT LastIndSeq; -// USHORT LastIndSeqAtTimer; USHORT TimeOutValue; RALINK_TIMER_STRUCT RECBATimer; ULONG LastIndSeqAtTimer; ULONG nDropPacket; ULONG rcvSeq; REC_BLOCKACK_STATUS REC_BA_Status; -// UCHAR RxBufIdxUsed; - // corresponding virtual address for RX reordering packet storage. - //RTMP_REORDERDMABUF MAP_RXBuf[MAX_RX_REORDERBUF]; NDIS_SPIN_LOCK RxReRingLock; // Rx Ring spinlock -// struct _BA_REC_ENTRY *pNext; PVOID pAdapter; struct reordering_list list; } BA_REC_ENTRY, *PBA_REC_ENTRY; @@ -1447,8 +1422,6 @@ typedef struct _IOT_STRUC { // This is the registry setting for 802.11n transmit setting. Used in advanced page. typedef union _REG_TRANSMIT_SETTING { struct { - //UINT32 PhyMode:4; - //UINT32 MCS:7; // MCS UINT32 rsv0:10; UINT32 TxBF:1; UINT32 BW:1; //channel bandwidth 20MHz or 40 MHz @@ -1546,7 +1519,6 @@ typedef struct _MULTISSID_STRUCT { DESIRED_TRANSMIT_SETTING DesiredTransmitSetting; // Desired transmit setting. this is for reading registry setting only. not useful. BOOLEAN bAutoTxRateSwitch; - //CIPHER_KEY SharedKey[SHARE_KEY_NUM]; // ref pAd->SharedKey[BSS][4] UCHAR DefaultKeyId; UCHAR TxRate; // RATE_1, RATE_2, RATE_5_5, RATE_11, ... @@ -1554,8 +1526,6 @@ typedef struct _MULTISSID_STRUCT { UCHAR DesiredRatesIndex; UCHAR MaxTxRate; // RATE_1, RATE_2, RATE_5_5, RATE_11 -// ULONG TimBitmap; // bit0 for broadcast, 1 for AID1, 2 for AID2, ...so on -// ULONG TimBitmap2; // b0 for AID32, b1 for AID33, ... and so on UCHAR TimBitmaps[WLAN_MAX_NUM_OF_TIM]; // WPA @@ -1673,15 +1643,11 @@ typedef struct _COMMON_CONFIG { ULONG TriggerTimerCount; UCHAR MaxSPLength; UCHAR BBPCurrentBW; // BW_10, BW_20, BW_40 - // move to MULTISSID_STRUCT for MBSS - //HTTRANSMIT_SETTING HTPhyMode, MaxHTPhyMode, MinHTPhyMode;// For transmit phy setting in TXWI. REG_TRANSMIT_SETTING RegTransmitSetting; //registry transmit setting. this is for reading registry setting only. not useful. - //UCHAR FixedTxMode; // Fixed Tx Mode (CCK, OFDM), for HT fixed tx mode (GF, MIX) , refer to RegTransmitSetting.field.HTMode UCHAR TxRate; // Same value to fill in TXD. TxRate is 6-bit UCHAR MaxTxRate; // RATE_1, RATE_2, RATE_5_5, RATE_11 UCHAR TxRateIndex; // Tx rate index in RateSwitchTable UCHAR TxRateTableSize; // Valid Tx rate table size in RateSwitchTable - //BOOLEAN bAutoTxRateSwitch; UCHAR MinTxRate; // RATE_1, RATE_2, RATE_5_5, RATE_11 UCHAR RtsRate; // RATE_xxx HTTRANSMIT_SETTING MlmeTransmit; // MGMT frame PHY rate setting when operatin at Ht rate. @@ -1883,9 +1849,6 @@ typedef struct _STA_ADMIN_CONFIG { BOOLEAN bHardwareRadio; // Hardware controlled Radio enabled BOOLEAN bShowHiddenSSID; // Show all known SSID in SSID list get operation - //BOOLEAN AdhocBOnlyJoined; // Indicate Adhoc B Join. - //BOOLEAN AdhocBGJoined; // Indicate Adhoc B/G Join. - //BOOLEAN Adhoc20NJoined; // Indicate Adhoc 20MHz N Join. // New for WPA, windows want us to to keep association information and // Fixed IEs from last association response @@ -2117,7 +2080,6 @@ typedef struct _MAC_TABLE_ENTRY { UCHAR CurrTxRateIndex; // to record the each TX rate's quality. 0 is best, the bigger the worse. USHORT TxQuality[MAX_STEP_OF_TX_RATE_SWITCH]; -// USHORT OneSecTxOkCount; UINT32 OneSecTxNoRetryOkCount; UINT32 OneSecTxRetryOkCount; UINT32 OneSecTxFailCount; @@ -2286,29 +2248,20 @@ typedef struct _APCLI_STRUCT { UCHAR PSK[100]; // reserve PSK key material UCHAR PSKLen; UCHAR PMK[32]; // WPA PSK mode PMK - //UCHAR PTK[64]; // WPA PSK mode PTK UCHAR GTK[32]; // GTK from authenticator - //CIPHER_KEY PairwiseKey; CIPHER_KEY SharedKey[SHARE_KEY_NUM]; UCHAR DefaultKeyId; - // WPA 802.1x port control, WPA_802_1X_PORT_SECURED, WPA_802_1X_PORT_NOT_SECURED - //UCHAR PortSecured; - // store RSN_IE built by driver UCHAR RSN_IE[MAX_LEN_OF_RSNIE]; // The content saved here should be convert to little-endian format. UCHAR RSNIE_Len; // For WPA countermeasures ULONG LastMicErrorTime; // record last MIC error time - //ULONG MicErrCnt; // Should be 0, 1, 2, then reset to zero (after disassoiciation). BOOLEAN bBlockAssoc; // Block associate attempt for 60 seconds after counter measure occurred. // For WPA-PSK supplicant state - //WPA_STATE WpaState; // Default is SS_NOTUSE - //UCHAR ReplayCounter[8]; - //UCHAR ANonce[32]; // ANonce for WPA-PSK from authenticator UCHAR SNonce[32]; // SNonce for WPA-PSK UCHAR GNonce[32]; // GNonce for WPA-PSK from authenticator @@ -2362,15 +2315,12 @@ typedef struct _RtmpDiagStrcut_ // Tx Related Count USHORT TxDataCnt[DIAGNOSE_TIME]; USHORT TxFailCnt[DIAGNOSE_TIME]; -// USHORT TxDescCnt[DIAGNOSE_TIME][16]; // TxDesc queue length in scale of 0~14, >=15 USHORT TxDescCnt[DIAGNOSE_TIME][24]; // 3*3 // TxDesc queue length in scale of 0~14, >=15 -// USHORT TxMcsCnt[DIAGNOSE_TIME][16]; // TxDate MCS Count in range from 0 to 15, step in 1. USHORT TxMcsCnt[DIAGNOSE_TIME][24]; // 3*3 USHORT TxSWQueCnt[DIAGNOSE_TIME][9]; // TxSwQueue length in scale of 0, 1, 2, 3, 4, 5, 6, 7, >=8 USHORT TxAggCnt[DIAGNOSE_TIME]; USHORT TxNonAggCnt[DIAGNOSE_TIME]; -// USHORT TxAMPDUCnt[DIAGNOSE_TIME][16]; // 10 sec, TxDMA APMDU Aggregation count in range from 0 to 15, in setp of 1. USHORT TxAMPDUCnt[DIAGNOSE_TIME][24]; // 3*3 // 10 sec, TxDMA APMDU Aggregation count in range from 0 to 15, in setp of 1. USHORT TxRalinkCnt[DIAGNOSE_TIME]; // TxRalink Aggregation Count in 1 sec scale. USHORT TxAMSDUCnt[DIAGNOSE_TIME]; // TxAMSUD Aggregation Count in 1 sec scale. @@ -2378,7 +2328,6 @@ typedef struct _RtmpDiagStrcut_ // Rx Related Count USHORT RxDataCnt[DIAGNOSE_TIME]; // Rx Total Data count. USHORT RxCrcErrCnt[DIAGNOSE_TIME]; -// USHORT RxMcsCnt[DIAGNOSE_TIME][16]; // Rx MCS Count in range from 0 to 15, step in 1. USHORT RxMcsCnt[DIAGNOSE_TIME][24]; // 3*3 }RtmpDiagStruct; #endif // DBG_DIAGNOSE // @@ -2630,8 +2579,6 @@ typedef struct _RTMP_ADAPTER NDIS_MEDIA_STATE IndicateMediaState; // Base on Indication state, default is NdisMediaStateDisConnected - // MAT related parameters - // configuration: read from Registry & E2PROM BOOLEAN bLocalAdminMAC; // Use user changed MAC UCHAR PermanentAddress[MAC_ADDR_LEN]; // Factory default MAC address @@ -2717,7 +2664,6 @@ typedef struct _RTMP_ADAPTER // ---------------------------- // DEBUG paramerts // ---------------------------- - //ULONG DebugSetting[4]; BOOLEAN bBanAllBaSetup; BOOLEAN bPromiscuous; @@ -2833,7 +2779,6 @@ typedef struct _CISCO_IAPP_CONTENT_ typedef struct _RX_BLK_ { -// RXD_STRUC RxD; // sample RT28XX_RXD_STRUC RxD; PRXWI_STRUC pRxWI; PHEADER_802_11 pHeader; @@ -2921,7 +2866,6 @@ typedef struct _TX_BLK_ #define fTX_bAckRequired 0x0002 // the packet need ack response #define fTX_bPiggyBack 0x0004 // Legacy device use Piggback or not #define fTX_bHTRate 0x0008 // allow to use HT rate -//#define fTX_bForceLowRate 0x0010 // force to use Low Rate #define fTX_bForceNonQoS 0x0010 // force to transmit frame without WMM-QoS in HT mode #define fTX_bAllowFrag 0x0020 // allow to fragment the packet, A-MPDU, A-MSDU, A-Ralink is not allowed to fragment #define fTX_bMoreData 0x0040 // there are more data packets in PowerSave Queue @@ -5331,10 +5275,6 @@ VOID RTMPFilterCalibration( IN PRTMP_ADAPTER pAd); #endif // RT30xx // - -//typedef void (*TIMER_FUNCTION)(unsigned long); - - /* timeout -- ms */ VOID RTMP_SetPeriodicTimer( IN NDIS_MINIPORT_TIMER *pTimer, -- cgit v1.1