From fdfda9a6407156fa6ad5b27a104b7526b83bd6b7 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Manuel=20P=C3=A9gouri=C3=A9-Gonnard?= Date: Tue, 29 Dec 2015 12:32:21 +0100 Subject: staging: mt29f: clean up existing kernel-doc MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit The existing kerneldoc blocs had a few issues: - some of them didn't start with /** - some used -- instead of - to separate the short description - some descriptions had text looking like section headers - some descriptions started with "to" while some used the imperative: use the imperative everywhere - some had a "with:" at the end of the shortdesc that didn't make sense once formatted by kernel-docs - two argument names where out of sync with the prototype Signed-off-by: Manuel Pégourié-Gonnard Signed-off-by: Greg Kroah-Hartman --- drivers/staging/mt29f_spinand/mt29f_spinand.c | 62 +++++++++++++-------------- 1 file changed, 31 insertions(+), 31 deletions(-) (limited to 'drivers/staging/mt29f_spinand') diff --git a/drivers/staging/mt29f_spinand/mt29f_spinand.c b/drivers/staging/mt29f_spinand/mt29f_spinand.c index 16cda44..3d9a426 100644 --- a/drivers/staging/mt29f_spinand/mt29f_spinand.c +++ b/drivers/staging/mt29f_spinand/mt29f_spinand.c @@ -63,8 +63,8 @@ static struct nand_ecclayout spinand_oob_64 = { }; #endif -/* - * spinand_cmd - to process a command to send to the SPI Nand +/** + * spinand_cmd - process a command to send to the SPI Nand * Description: * Set up the command buffer to send to the SPI controller. * The command buffer has to initialized to 0. @@ -110,10 +110,10 @@ static int spinand_cmd(struct spi_device *spi, struct spinand_cmd *cmd) return spi_sync(spi, &message); } -/* - * spinand_read_id- Read SPI Nand ID +/** + * spinand_read_id - Read SPI Nand ID * Description: - * Read ID: read two ID bytes from the SPI Nand device + * read two ID bytes from the SPI Nand device */ static int spinand_read_id(struct spi_device *spi_nand, u8 *id) { @@ -135,8 +135,8 @@ static int spinand_read_id(struct spi_device *spi_nand, u8 *id) return retval; } -/* - * spinand_read_status- send command 0xf to the SPI Nand status register +/** + * spinand_read_status - send command 0xf to the SPI Nand status register * Description: * After read, write, or erase, the Nand device is expected to set the * busy status. @@ -188,7 +188,7 @@ static int wait_till_ready(struct spi_device *spi_nand) } /** - * spinand_get_otp- send command 0xf to read the SPI Nand OTP register + * spinand_get_otp - send command 0xf to read the SPI Nand OTP register * Description: * There is one bit( bit 0x10 ) to set or to clear the internal ECC. * Enable chip internal ECC, set the bit to 1 @@ -212,7 +212,7 @@ static int spinand_get_otp(struct spi_device *spi_nand, u8 *otp) } /** - * spinand_set_otp- send command 0x1f to write the SPI Nand OTP register + * spinand_set_otp - send command 0x1f to write the SPI Nand OTP register * Description: * There is one bit( bit 0x10 ) to set or to clear the internal ECC. * Enable chip internal ECC, set the bit to 1 @@ -238,7 +238,7 @@ static int spinand_set_otp(struct spi_device *spi_nand, u8 *otp) #ifdef CONFIG_MTD_SPINAND_ONDIEECC /** - * spinand_enable_ecc- send command 0x1f to write the SPI Nand OTP register + * spinand_enable_ecc - send command 0x1f to write the SPI Nand OTP register * Description: * There is one bit( bit 0x10 ) to set or to clear the internal ECC. * Enable chip internal ECC, set the bit to 1 @@ -283,7 +283,7 @@ static int spinand_disable_ecc(struct spi_device *spi_nand) } /** - * spinand_write_enable- send command 0x06 to enable write or erase the + * spinand_write_enable - send command 0x06 to enable write or erase the * Nand cells * Description: * Before write and erase the Nand cells, the write enable has to be set. @@ -313,9 +313,9 @@ static int spinand_read_page_to_cache(struct spi_device *spi_nand, u16 page_id) return spinand_cmd(spi_nand, &cmd); } -/* - * spinand_read_from_cache- send command 0x03 to read out the data from the - * cache register(2112 bytes max) +/** + * spinand_read_from_cache - send command 0x03 to read out the data from the + * cache register (2112 bytes max) * Description: * The read can specify 1 to 2112 bytes of data read at the corresponding * locations. @@ -341,15 +341,15 @@ static int spinand_read_from_cache(struct spi_device *spi_nand, u16 page_id, return spinand_cmd(spi_nand, &cmd); } -/* - * spinand_read_page-to read a page with: +/** + * spinand_read_page - read a page * @page_id: the physical page number * @offset: the location from 0 to 2111 * @len: number of bytes to read * @rbuf: read buffer to hold @len bytes * * Description: - * The read includes two commands to the Nand: 0x13 and 0x03 commands + * The read includes two commands to the Nand - 0x13 and 0x03 commands * Poll to read status to wait for tRD time. */ static int spinand_read_page(struct spi_device *spi_nand, u16 page_id, @@ -408,11 +408,11 @@ static int spinand_read_page(struct spi_device *spi_nand, u16 page_id, return ret; } -/* - * spinand_program_data_to_cache--to write a page to cache with: +/** + * spinand_program_data_to_cache - write a page to cache * @byte_id: the location to write to the cache * @len: number of bytes to write - * @rbuf: read buffer to hold @len bytes + * @wbuf: write buffer holding @len bytes * * Description: * The write command used here is 0x84--indicating that the cache is @@ -439,7 +439,7 @@ static int spinand_program_data_to_cache(struct spi_device *spi_nand, } /** - * spinand_program_execute--to write a page from cache to the Nand array with + * spinand_program_execute - write a page from cache to the Nand array * @page_id: the physical page location to write the page. * * Description: @@ -462,11 +462,11 @@ static int spinand_program_execute(struct spi_device *spi_nand, u16 page_id) } /** - * spinand_program_page--to write a page with: + * spinand_program_page - write a page * @page_id: the physical page location to write the page. * @offset: the location from the cache starting from 0 to 2111 * @len: the number of bytes to write - * @wbuf: the buffer to hold the number of bytes + * @buf: the buffer holding @len bytes * * Description: * The commands used here are 0x06, 0x84, and 0x10--indicating that @@ -550,7 +550,7 @@ static int spinand_program_page(struct spi_device *spi_nand, } /** - * spinand_erase_block_erase--to erase a page with: + * spinand_erase_block_erase - erase a page * @block_id: the physical block location to erase. * * Description: @@ -573,7 +573,7 @@ static int spinand_erase_block_erase(struct spi_device *spi_nand, u16 block_id) } /** - * spinand_erase_block--to erase a page with: + * spinand_erase_block - erase a page * @block_id: the physical block location to erase. * * Description: @@ -813,7 +813,7 @@ static void spinand_cmdfunc(struct mtd_info *mtd, unsigned int command, } /** - * spinand_lock_block- send write register 0x1f command to the Nand device + * spinand_lock_block - send write register 0x1f command to the Nand device * * Description: * After power up, all the Nand blocks are locked. This function allows @@ -840,12 +840,12 @@ static int spinand_lock_block(struct spi_device *spi_nand, u8 lock) return ret; } -/* +/** * spinand_probe - [spinand Interface] * @spi_nand: registered device driver. * * Description: - * To set up the device driver parameters to make the device available. + * Set up the device driver parameters to make the device available. */ static int spinand_probe(struct spi_device *spi_nand) { @@ -919,12 +919,12 @@ static int spinand_probe(struct spi_device *spi_nand) return mtd_device_register(mtd, NULL, 0); } -/* - * spinand_remove: Remove the device driver +/** + * spinand_remove - remove the device driver * @spi: the spi device. * * Description: - * To remove the device driver parameters and free up allocated memories. + * Remove the device driver parameters and free up allocated memories. */ static int spinand_remove(struct spi_device *spi) { -- cgit v1.1