From af7db4e90e47cc9e2220fb827e9c11235370c603 Mon Sep 17 00:00:00 2001 From: Sakari Ailus Date: Mon, 25 Sep 2017 13:17:31 +0200 Subject: media: staging: atomisp: Update TODO regarding sensors There was no specific item regarding what should be done to sensor, lens and flash drivers. Add one, to replace the vague item denoting support only to particular sensor, lens and flash devices. Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab --- drivers/staging/media/atomisp/TODO | 22 +++++++++++++++------- 1 file changed, 15 insertions(+), 7 deletions(-) (limited to 'drivers/staging/media/atomisp/TODO') diff --git a/drivers/staging/media/atomisp/TODO b/drivers/staging/media/atomisp/TODO index 737452c..447cb59 100644 --- a/drivers/staging/media/atomisp/TODO +++ b/drivers/staging/media/atomisp/TODO @@ -36,13 +36,21 @@ there are any specific things that can be done to fold in support for multiple firmware versions. +8. Switch to V4L2 async API to set up sensor, lens and flash devices. + Control those devices using V4L2 sub-device API without custom + extensions. -Limitations: +9. Switch to standard V4L2 sub-device API for sensor and lens. In + particular, the user space API needs to support V4L2 controls as + defined in the V4L2 spec and references to atomisp must be removed from + these drivers. + +10. Use LED flash API for flash LED drivers such as LM3554 (which already + has a LED class driver). -1. Currently the patch only support some camera sensors - gc2235/gc0310/0v2680/ov2722/ov5693/mt9m114... +Limitations: -2. To test the patches, you also need the ISP firmware +1. To test the patches, you also need the ISP firmware for BYT:/lib/firmware/shisp_2400b0_v21.bin for CHT:/lib/firmware/shisp_2401a0_v21.bin @@ -51,14 +59,14 @@ Limitations: device but can also be extracted from the upgrade kit if you've managed to lose them somehow. -3. Without a 3A libary the capture behaviour is not very good. To take a good +2. Without a 3A libary the capture behaviour is not very good. To take a good picture, you need tune ISP parameters by IOCTL functions or use a 3A libary such as libxcam. -4. The driver is intended to drive the PCI exposed versions of the device. +3. The driver is intended to drive the PCI exposed versions of the device. It will not detect those devices enumerated via ACPI as a field of the i915 GPU driver. -5. The driver supports only v2 of the IPU/Camera. It will not work with the +4. The driver supports only v2 of the IPU/Camera. It will not work with the versions of the hardware in other SoCs. -- cgit v1.1