From 7f6ee1adc75bf31d1b76814338f76a88e653cb60 Mon Sep 17 00:00:00 2001 From: Justin Clacherty Date: Fri, 26 Jan 2007 00:56:44 -0800 Subject: [PATCH] spi: fix error setting the spi mode in pxa2xx_spi.c Currently the spi mode can be set to the wrong mode if you are switching from any mode other than mode 0. This is because the mode is set using a bitwise or on uncleared bits. The following patch clears the mode bits before setting the new mode. I've also modified it to use the appropriate defines from pxa-regs.h for readability. Signed-off-by: Justin Clacherty Signed-off-by: David Brownell Signed-off-by: Andrew Morton Signed-off-by: Linus Torvalds --- drivers/spi/pxa2xx_spi.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) (limited to 'drivers/spi') diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c index 6ed3f1d..8b41f9c 100644 --- a/drivers/spi/pxa2xx_spi.c +++ b/drivers/spi/pxa2xx_spi.c @@ -1169,8 +1169,9 @@ static int setup(struct spi_device *spi) spi->bits_per_word - 16 : spi->bits_per_word) | SSCR0_SSE | (spi->bits_per_word > 16 ? SSCR0_EDSS : 0); - chip->cr1 |= (((spi->mode & SPI_CPHA) != 0) << 4) - | (((spi->mode & SPI_CPOL) != 0) << 3); + chip->cr1 &= ~(SSCR1_SPO | SSCR1_SPH); + chip->cr1 |= (((spi->mode & SPI_CPHA) != 0) ? SSCR1_SPH : 0) + | (((spi->mode & SPI_CPOL) != 0) ? SSCR1_SPO : 0); /* NOTE: PXA25x_SSP _could_ use external clocking ... */ if (drv_data->ssp_type != PXA25x_SSP) -- cgit v1.1